Merge tag 'v6.1-rc6' into x86/core, to resolve conflicts

Resolve conflicts between these commits in arch/x86/kernel/asm-offsets.c:

 # upstream:
 debc5a1ec0d1 ("KVM: x86: use a separate asm-offsets.c file")

 # retbleed work in x86/core:
 5d8213864ade ("x86/retbleed: Add SKL return thunk")

... and these commits in include/linux/bpf.h:

  # upstram:
  18acb7fac22f ("bpf: Revert ("Fix dispatcher patchable function entry to 5 bytes nop")")

  # x86/core commits:
  931ab63664f0 ("x86/ibt: Implement FineIBT")
  bea75b33895f ("x86/Kconfig: Introduce function padding")

The latter two modify BPF_DISPATCHER_ATTRIBUTES(), which was removed upstream.

 Conflicts:
	arch/x86/kernel/asm-offsets.c
	include/linux/bpf.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>

8 files changed, 101 insertions, 58 deletions

diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index 44cc755b1a29..0e43bdfb7459 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -174,6 +174,8 @@ static int ehl_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
 	 */
 	up->dma = dma;
 
+	lpss->dma_maxburst = 16;
+
 	port->set_termios = dw8250_do_set_termios;
 
 	return 0;
@@ -277,8 +279,13 @@ static int lpss8250_dma_setup(struct lpss8250 *lpss, struct uart_8250_port *port
 	struct dw_dma_slave *rx_param, *tx_param;
 	struct device *dev = port->port.dev;
 
-	if (!lpss->dma_param.dma_dev)
+	if (!lpss->dma_param.dma_dev) {
+		dma = port->dma;
+		if (dma)
+			goto out_configuration_only;
+
 		return 0;
+	}
 
 	rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL);
 	if (!rx_param)
@@ -289,16 +296,18 @@ static int lpss8250_dma_setup(struct lpss8250 *lpss, struct uart_8250_port *port
 		return -ENOMEM;
 
 	*rx_param = lpss->dma_param;
-	dma->rxconf.src_maxburst = lpss->dma_maxburst;
-
 	*tx_param = lpss->dma_param;
-	dma->txconf.dst_maxburst = lpss->dma_maxburst;
 
 	dma->fn = lpss8250_dma_filter;
 	dma->rx_param = rx_param;
 	dma->tx_param = tx_param;
 
 	port->dma = dma;
+
+out_configuration_only:
+	dma->rxconf.src_maxburst = lpss->dma_maxburst;
+	dma->txconf.dst_maxburst = lpss->dma_maxburst;
+
 	return 0;
 }
 
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 41b8c6b27136..3f33014022f0 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -157,7 +157,11 @@ static u32 uart_read(struct uart_8250_port *up, u32 reg)
 	return readl(up->port.membase + (reg << up->port.regshift));
 }
 
-static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
+/*
+ * Called on runtime PM resume path from omap8250_restore_regs(), and
+ * omap8250_set_mctrl().
+ */
+static void __omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
 	struct uart_8250_port *up = up_to_u8250p(port);
 	struct omap8250_priv *priv = up->port.private_data;
@@ -181,6 +185,20 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
 	}
 }
 
+static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	int err;
+
+	err = pm_runtime_resume_and_get(port->dev);
+	if (err)
+		return;
+
+	__omap8250_set_mctrl(port, mctrl);
+
+	pm_runtime_mark_last_busy(port->dev);
+	pm_runtime_put_autosuspend(port->dev);
+}
+
 /*
  * Work Around for Errata i202 (2430, 3430, 3630, 4430 and 4460)
  * The access to uart register after MDR1 Access
@@ -193,27 +211,10 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
 static void omap_8250_mdr1_errataset(struct uart_8250_port *up,
 				     struct omap8250_priv *priv)
 {
-	u8 timeout = 255;
-
 	serial_out(up, UART_OMAP_MDR1, priv->mdr1);
 	udelay(2);
 	serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_XMIT |
 			UART_FCR_CLEAR_RCVR);
-	/*
-	 * Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and
-	 * TX_FIFO_E bit is 1.
-	 */
-	while (UART_LSR_THRE != (serial_in(up, UART_LSR) &
-				(UART_LSR_THRE | UART_LSR_DR))) {
-		timeout--;
-		if (!timeout) {
-			/* Should *never* happen. we warn and carry on */
-			dev_crit(up->port.dev, "Errata i202: timedout %x\n",
-				 serial_in(up, UART_LSR));
-			break;
-		}
-		udelay(1);
-	}
 }
 
 static void omap_8250_get_divisor(struct uart_port *port, unsigned int baud,
@@ -292,6 +293,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
 {
 	struct omap8250_priv *priv = up->port.private_data;
 	struct uart_8250_dma	*dma = up->dma;
+	u8 mcr = serial8250_in_MCR(up);
 
 	if (dma && dma->tx_running) {
 		/*
@@ -308,7 +310,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
 	serial_out(up, UART_EFR, UART_EFR_ECB);
 
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
-	serial8250_out_MCR(up, UART_MCR_TCRTLR);
+	serial8250_out_MCR(up, mcr | UART_MCR_TCRTLR);
 	serial_out(up, UART_FCR, up->fcr);
 
 	omap8250_update_scr(up, priv);
@@ -324,7 +326,8 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
 	serial_out(up, UART_LCR, 0);
 
 	/* drop TCR + TLR access, we setup XON/XOFF later */
-	serial8250_out_MCR(up, up->mcr);
+	serial8250_out_MCR(up, mcr);
+
 	serial_out(up, UART_IER, up->ier);
 
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
@@ -341,7 +344,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
 
 	omap8250_update_mdr1(up, priv);
 
-	up->port.ops->set_mctrl(&up->port, up->port.mctrl);
+	__omap8250_set_mctrl(&up->port, up->port.mctrl);
 
 	if (up->port.rs485.flags & SER_RS485_ENABLED)
 		serial8250_em485_stop_tx(up);
@@ -669,7 +672,6 @@ static int omap_8250_startup(struct uart_port *port)
 
 	pm_runtime_get_sync(port->dev);
 
-	up->mcr = 0;
 	serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
 
 	serial_out(up, UART_LCR, UART_LCR_WLEN8);
@@ -1458,9 +1460,15 @@ err:
 static int omap8250_remove(struct platform_device *pdev)
 {
 	struct omap8250_priv *priv = platform_get_drvdata(pdev);
+	int err;
+
+	err = pm_runtime_resume_and_get(&pdev->dev);
+	if (err)
+		return err;
 
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
 	pm_runtime_put_sync(&pdev->dev);
+	flush_work(&priv->qos_work);
 	pm_runtime_disable(&pdev->dev);
 	serial8250_unregister_port(priv->line);
 	cpu_latency_qos_remove_request(&priv->pm_qos_request);
diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_parisc.c
index 948d0a1c6ae8..948d0a1c6ae8 100644
--- a/drivers/tty/serial/8250/8250_gsc.c
+++ b/drivers/tty/serial/8250/8250_parisc.c
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index fe8662cd9402..388172289627 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1897,10 +1897,13 @@ EXPORT_SYMBOL_GPL(serial8250_modem_status);
 static bool handle_rx_dma(struct uart_8250_port *up, unsigned int iir)
 {
 	switch (iir & 0x3f) {
-	case UART_IIR_RX_TIMEOUT:
-		serial8250_rx_dma_flush(up);
+	case UART_IIR_RDI:
+		if (!up->dma->rx_running)
+			break;
 		fallthrough;
 	case UART_IIR_RLSI:
+	case UART_IIR_RX_TIMEOUT:
+		serial8250_rx_dma_flush(up);
 		return true;
 	}
 	return up->dma->rx_dma(up);
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index d0b49e15fbf5..b0f62345bc84 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -116,9 +116,9 @@ config SERIAL_8250_CONSOLE
 
 	  If unsure, say N.
 
-config SERIAL_8250_GSC
+config SERIAL_8250_PARISC
 	tristate
-	depends on SERIAL_8250 && GSC
+	depends on SERIAL_8250 && PARISC
 	default SERIAL_8250
 
 config SERIAL_8250_DMA
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index bee908f99ea0..1615bfdde2a0 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -12,7 +12,7 @@ obj-$(CONFIG_SERIAL_8250)		+= 8250.o 8250_base.o
 8250_base-$(CONFIG_SERIAL_8250_DMA)	+= 8250_dma.o
 8250_base-$(CONFIG_SERIAL_8250_DWLIB)	+= 8250_dwlib.o
 8250_base-$(CONFIG_SERIAL_8250_FINTEK)	+= 8250_fintek.o
-obj-$(CONFIG_SERIAL_8250_GSC)		+= 8250_gsc.o
+obj-$(CONFIG_SERIAL_8250_PARISC)	+= 8250_parisc.o
 obj-$(CONFIG_SERIAL_8250_PCI)		+= 8250_pci.o
 obj-$(CONFIG_SERIAL_8250_EXAR)		+= 8250_exar.o
 obj-$(CONFIG_SERIAL_8250_HP300)		+= 8250_hp300.o
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 67fa113f77d4..888e01fbd9c5 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -12,6 +12,7 @@
 #include <linux/dmaengine.h>
 #include <linux/dmapool.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/irq.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -404,33 +405,6 @@ static unsigned int lpuart_get_baud_clk_rate(struct lpuart_port *sport)
 #define lpuart_enable_clks(x)	__lpuart_enable_clks(x, true)
 #define lpuart_disable_clks(x)	__lpuart_enable_clks(x, false)
 
-static int lpuart_global_reset(struct lpuart_port *sport)
-{
-	struct uart_port *port = &sport->port;
-	void __iomem *global_addr;
-	int ret;
-
-	if (uart_console(port))
-		return 0;
-
-	ret = clk_prepare_enable(sport->ipg_clk);
-	if (ret) {
-		dev_err(sport->port.dev, "failed to enable uart ipg clk: %d\n", ret);
-		return ret;
-	}
-
-	if (is_imx7ulp_lpuart(sport) || is_imx8qxp_lpuart(sport)) {
-		global_addr = port->membase + UART_GLOBAL - IMX_REG_OFF;
-		writel(UART_GLOBAL_RST, global_addr);
-		usleep_range(GLOBAL_RST_MIN_US, GLOBAL_RST_MAX_US);
-		writel(0, global_addr);
-		usleep_range(GLOBAL_RST_MIN_US, GLOBAL_RST_MAX_US);
-	}
-
-	clk_disable_unprepare(sport->ipg_clk);
-	return 0;
-}
-
 static void lpuart_stop_tx(struct uart_port *port)
 {
 	unsigned char temp;
@@ -2636,6 +2610,54 @@ static const struct serial_rs485 lpuart_rs485_supported = {
 	/* delay_rts_* and RX_DURING_TX are not supported */
 };
 
+static int lpuart_global_reset(struct lpuart_port *sport)
+{
+	struct uart_port *port = &sport->port;
+	void __iomem *global_addr;
+	unsigned long ctrl, bd;
+	unsigned int val = 0;
+	int ret;
+
+	ret = clk_prepare_enable(sport->ipg_clk);
+	if (ret) {
+		dev_err(sport->port.dev, "failed to enable uart ipg clk: %d\n", ret);
+		return ret;
+	}
+
+	if (is_imx7ulp_lpuart(sport) || is_imx8qxp_lpuart(sport)) {
+		/*
+		 * If the transmitter is used by earlycon, wait for transmit engine to
+		 * complete and then reset.
+		 */
+		ctrl = lpuart32_read(port, UARTCTRL);
+		if (ctrl & UARTCTRL_TE) {
+			bd = lpuart32_read(&sport->port, UARTBAUD);
+			if (read_poll_timeout(lpuart32_tx_empty, val, val, 1, 100000, false,
+					      port)) {
+				dev_warn(sport->port.dev,
+					 "timeout waiting for transmit engine to complete\n");
+				clk_disable_unprepare(sport->ipg_clk);
+				return 0;
+			}
+		}
+
+		global_addr = port->membase + UART_GLOBAL - IMX_REG_OFF;
+		writel(UART_GLOBAL_RST, global_addr);
+		usleep_range(GLOBAL_RST_MIN_US, GLOBAL_RST_MAX_US);
+		writel(0, global_addr);
+		usleep_range(GLOBAL_RST_MIN_US, GLOBAL_RST_MAX_US);
+
+		/* Recover the transmitter for earlycon. */
+		if (ctrl & UARTCTRL_TE) {
+			lpuart32_write(port, bd, UARTBAUD);
+			lpuart32_write(port, ctrl, UARTCTRL);
+		}
+	}
+
+	clk_disable_unprepare(sport->ipg_clk);
+	return 0;
+}
+
 static int lpuart_probe(struct platform_device *pdev)
 {
 	const struct lpuart_soc_data *sdata = of_device_get_match_data(&pdev->dev);
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 05b432dc7a85..aadda66405b4 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -2594,6 +2594,7 @@ static const struct dev_pm_ops imx_uart_pm_ops = {
 	.suspend_noirq = imx_uart_suspend_noirq,
 	.resume_noirq = imx_uart_resume_noirq,
 	.freeze_noirq = imx_uart_suspend_noirq,
+	.thaw_noirq = imx_uart_resume_noirq,
 	.restore_noirq = imx_uart_resume_noirq,
 	.suspend = imx_uart_suspend,
 	.resume = imx_uart_resume,