Merge tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of Thunderbolt and USB changes for 6.0-rc1.

  Lots of little things here, nothing major, just constant development
  on some new hardware support and cleanups of older drivers. Highlights
  are:

   - lots of typec changes and improvements for new hardware

   - new gadget controller driver

   - thunderbolt support for new hardware

   - the normal set of new usb-serial device ids and cleanups

   - loads of dwc3 controller fixes and improvements

   - mtu3 driver updates

   - testusb fixes for longtime issues (not many people use this tool it
     seems.)

   - minor driver fixes and improvements over the USB tree

   - chromeos platform driver changes were added and then reverted as
     they depened on some typec changes, but the cross-tree merges
     caused problems so they will come back later through the platform
     tree.

  All of these have been in linux-next for a while now with no reported
  issues"

* tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (193 commits)
  usb: misc: onboard_usb_hub: Remove duplicated power_on delay
  usb: misc: onboard_usb_hub: Add TI USB8041 hub support
  usb: misc: onboard_usb_hub: Add reset-gpio support
  USB: usbsevseg: convert sysfs snprintf to sysfs_emit
  dt-bindings: usb: Add binding for TI USB8041 hub controller
  ARM: multi_v7_defconfig: enable USB onboard HUB driver
  ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx
  usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub
  dt-bindings: usb: generic-ehci: allow usb-hcd schema properties
  usb: typec: ucsi: stm32g0: add bootloader support
  usb: typec: ucsi: stm32g0: add support for stm32g0 controller
  dt-bindings: usb: typec: add bindings for stm32g0 controller
  usb: typec: ucsi: Acknowledge the GET_ERROR_STATUS command completion
  usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()
  usb/chipidea: fix repeated words in comments
  usb: renesas-xhci: Do not print any log while fw verif success
  usb: typec: retimer: Add missing id check in match callback
  USB: xhci: Fix comment typo
  usb/typec/tcpm: fix repeated words in comments
  usb/musb: fix repeated words in comments
  ...

8 files changed, 0 insertions, 5617 deletions

diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 0a993c47273e..3bd80f9695ac 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -42,8 +42,6 @@ source "drivers/staging/rts5208/Kconfig"
 
 source "drivers/staging/octeon/Kconfig"
 
-source "drivers/staging/octeon-usb/Kconfig"
-
 source "drivers/staging/vt6655/Kconfig"
 
 source "drivers/staging/vt6656/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 2800ab9b2d1d..1d9ae39fea14 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -11,7 +11,6 @@ obj-$(CONFIG_R8712U)		+= rtl8712/
 obj-$(CONFIG_R8188EU)		+= r8188eu/
 obj-$(CONFIG_RTS5208)		+= rts5208/
 obj-$(CONFIG_OCTEON_ETHERNET)	+= octeon/
-obj-$(CONFIG_OCTEON_USB)	+= octeon-usb/
 obj-$(CONFIG_VT6655)		+= vt6655/
 obj-$(CONFIG_VT6656)		+= vt6656/
 obj-$(CONFIG_VME_BUS)		+= vme_user/
diff --git a/drivers/staging/gdm724x/gdm_tty.c b/drivers/staging/gdm724x/gdm_tty.c
index 04df6f9f5403..cc6d80554c98 100644
--- a/drivers/staging/gdm724x/gdm_tty.c
+++ b/drivers/staging/gdm724x/gdm_tty.c
@@ -17,12 +17,6 @@
 #define GDM_TTY_MAJOR 0
 #define GDM_TTY_MINOR 32
 
-#define ACM_CTRL_DTR 0x01
-#define ACM_CTRL_RTS 0x02
-#define ACM_CTRL_DSR 0x02
-#define ACM_CTRL_RI  0x08
-#define ACM_CTRL_DCD 0x01
-
 #define WRITE_SIZE 2048
 
 #define MUX_TX_MAX_SIZE 2048
diff --git a/drivers/staging/octeon-usb/Kconfig b/drivers/staging/octeon-usb/Kconfig
deleted file mode 100644
index 6a5d842ee0f2..000000000000
--- a/drivers/staging/octeon-usb/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config OCTEON_USB
-	tristate "Cavium Networks Octeon USB support"
-	depends on CAVIUM_OCTEON_SOC && USB
-	help
-	  This driver supports USB host controller on some Cavium
-	  Networks' products in the Octeon family.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called octeon-hcd.
-
diff --git a/drivers/staging/octeon-usb/Makefile b/drivers/staging/octeon-usb/Makefile
deleted file mode 100644
index 9873a0130ad5..000000000000
--- a/drivers/staging/octeon-usb/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-${CONFIG_OCTEON_USB} := octeon-hcd.o
diff --git a/drivers/staging/octeon-usb/TODO b/drivers/staging/octeon-usb/TODO
deleted file mode 100644
index 2b29acca5caa..000000000000
--- a/drivers/staging/octeon-usb/TODO
+++ /dev/null
@@ -1,8 +0,0 @@
-This driver is functional and has been tested on EdgeRouter Lite,
-D-Link DSR-1000N and EBH5600 evaluation board with USB mass storage.
-
-TODO:
-	- kernel coding style
-	- checkpatch warnings
-
-Contact: Aaro Koskinen <aaro.koskinen@iki.fi>
diff --git a/drivers/staging/octeon-usb/octeon-hcd.c b/drivers/staging/octeon-usb/octeon-hcd.c
deleted file mode 100644
index a1cd81d4a114..000000000000
--- a/drivers/staging/octeon-usb/octeon-hcd.c
+++ /dev/null
@@ -1,3740 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2008 Cavium Networks
- *
- * Some parts of the code were originally released under BSD license:
- *
- * Copyright (c) 2003-2010 Cavium Networks (support@cavium.com). All rights
- * reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *
- *   * Redistributions in binary form must reproduce the above
- *     copyright notice, this list of conditions and the following
- *     disclaimer in the documentation and/or other materials provided
- *     with the distribution.
- *
- *   * Neither the name of Cavium Networks nor the names of
- *     its contributors may be used to endorse or promote products
- *     derived from this software without specific prior written
- *     permission.
- *
- * This Software, including technical data, may be subject to U.S. export
- * control laws, including the U.S. Export Administration Act and its associated
- * regulations, and may be subject to export or import regulations in other
- * countries.
- *
- * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
- * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
- * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
- * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION
- * OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
- * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
- * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
- * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
- * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
- * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
- */
-
-#include <linux/usb.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/usb/hcd.h>
-#include <linux/prefetch.h>
-#include <linux/irqdomain.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-
-#include <asm/octeon/octeon.h>
-
-#include "octeon-hcd.h"
-
-/**
- * enum cvmx_usb_speed - the possible USB device speeds
- *
- * @CVMX_USB_SPEED_HIGH: Device is operation at 480Mbps
- * @CVMX_USB_SPEED_FULL: Device is operation at 12Mbps
- * @CVMX_USB_SPEED_LOW:  Device is operation at 1.5Mbps
- */
-enum cvmx_usb_speed {
-	CVMX_USB_SPEED_HIGH = 0,
-	CVMX_USB_SPEED_FULL = 1,
-	CVMX_USB_SPEED_LOW = 2,
-};
-
-/**
- * enum cvmx_usb_transfer - the possible USB transfer types
- *
- * @CVMX_USB_TRANSFER_CONTROL:	   USB transfer type control for hub and status
- *				   transfers
- * @CVMX_USB_TRANSFER_ISOCHRONOUS: USB transfer type isochronous for low
- *				   priority periodic transfers
- * @CVMX_USB_TRANSFER_BULK:	   USB transfer type bulk for large low priority
- *				   transfers
- * @CVMX_USB_TRANSFER_INTERRUPT:   USB transfer type interrupt for high priority
- *				   periodic transfers
- */
-enum cvmx_usb_transfer {
-	CVMX_USB_TRANSFER_CONTROL = 0,
-	CVMX_USB_TRANSFER_ISOCHRONOUS = 1,
-	CVMX_USB_TRANSFER_BULK = 2,
-	CVMX_USB_TRANSFER_INTERRUPT = 3,
-};
-
-/**
- * enum cvmx_usb_direction - the transfer directions
- *
- * @CVMX_USB_DIRECTION_OUT: Data is transferring from Octeon to the device/host
- * @CVMX_USB_DIRECTION_IN:  Data is transferring from the device/host to Octeon
- */
-enum cvmx_usb_direction {
-	CVMX_USB_DIRECTION_OUT,
-	CVMX_USB_DIRECTION_IN,
-};
-
-/**
- * enum cvmx_usb_status - possible callback function status codes
- *
- * @CVMX_USB_STATUS_OK:		  The transaction / operation finished without
- *				  any errors
- * @CVMX_USB_STATUS_SHORT:	  FIXME: This is currently not implemented
- * @CVMX_USB_STATUS_CANCEL:	  The transaction was canceled while in flight
- *				  by a user call to cvmx_usb_cancel
- * @CVMX_USB_STATUS_ERROR:	  The transaction aborted with an unexpected
- *				  error status
- * @CVMX_USB_STATUS_STALL:	  The transaction received a USB STALL response
- *				  from the device
- * @CVMX_USB_STATUS_XACTERR:	  The transaction failed with an error from the
- *				  device even after a number of retries
- * @CVMX_USB_STATUS_DATATGLERR:	  The transaction failed with a data toggle
- *				  error even after a number of retries
- * @CVMX_USB_STATUS_BABBLEERR:	  The transaction failed with a babble error
- * @CVMX_USB_STATUS_FRAMEERR:	  The transaction failed with a frame error
- *				  even after a number of retries
- */
-enum cvmx_usb_status {
-	CVMX_USB_STATUS_OK,
-	CVMX_USB_STATUS_SHORT,
-	CVMX_USB_STATUS_CANCEL,
-	CVMX_USB_STATUS_ERROR,
-	CVMX_USB_STATUS_STALL,
-	CVMX_USB_STATUS_XACTERR,
-	CVMX_USB_STATUS_DATATGLERR,
-	CVMX_USB_STATUS_BABBLEERR,
-	CVMX_USB_STATUS_FRAMEERR,
-};
-
-/**
- * struct cvmx_usb_port_status - the USB port status information
- *
- * @port_enabled:	1 = Usb port is enabled, 0 = disabled
- * @port_over_current:	1 = Over current detected, 0 = Over current not
- *			detected. Octeon doesn't support over current detection.
- * @port_powered:	1 = Port power is being supplied to the device, 0 =
- *			power is off. Octeon doesn't support turning port power
- *			off.
- * @port_speed:		Current port speed.
- * @connected:		1 = A device is connected to the port, 0 = No device is
- *			connected.
- * @connect_change:	1 = Device connected state changed since the last set
- *			status call.
- */
-struct cvmx_usb_port_status {
-	u32 reserved			: 25;
-	u32 port_enabled		: 1;
-	u32 port_over_current		: 1;
-	u32 port_powered		: 1;
-	enum cvmx_usb_speed port_speed	: 2;
-	u32 connected			: 1;
-	u32 connect_change		: 1;
-};
-
-/**
- * struct cvmx_usb_iso_packet - descriptor for Isochronous packets
- *
- * @offset:	This is the offset in bytes into the main buffer where this data
- *		is stored.
- * @length:	This is the length in bytes of the data.
- * @status:	This is the status of this individual packet transfer.
- */
-struct cvmx_usb_iso_packet {
-	int offset;
-	int length;
-	enum cvmx_usb_status status;
-};
-
-/**
- * enum cvmx_usb_initialize_flags - flags used by the initialization function
- *
- * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI:    The USB port uses a 12MHz crystal
- *					      as clock source at USB_XO and
- *					      USB_XI.
- * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND:   The USB port uses 12/24/48MHz 2.5V
- *					      board clock source at USB_XO.
- *					      USB_XI should be tied to GND.
- * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK: Mask for clock speed field
- * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ:    Speed of reference clock or
- *					      crystal
- * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ:    Speed of reference clock
- * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ:    Speed of reference clock
- * @CVMX_USB_INITIALIZE_FLAGS_NO_DMA:	      Disable DMA and used polled IO for
- *					      data transfer use for the USB
- */
-enum cvmx_usb_initialize_flags {
-	CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI		= 1 << 0,
-	CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND		= 1 << 1,
-	CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK	= 3 << 3,
-	CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ		= 1 << 3,
-	CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ		= 2 << 3,
-	CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ		= 3 << 3,
-	/* Bits 3-4 used to encode the clock frequency */
-	CVMX_USB_INITIALIZE_FLAGS_NO_DMA		= 1 << 5,
-};
-
-/**
- * enum cvmx_usb_pipe_flags - internal flags for a pipe.
- *
- * @CVMX_USB_PIPE_FLAGS_SCHEDULED: Used internally to determine if a pipe is
- *				   actively using hardware.
- * @CVMX_USB_PIPE_FLAGS_NEED_PING: Used internally to determine if a high speed
- *				   pipe is in the ping state.
- */
-enum cvmx_usb_pipe_flags {
-	CVMX_USB_PIPE_FLAGS_SCHEDULED	= 1 << 17,
-	CVMX_USB_PIPE_FLAGS_NEED_PING	= 1 << 18,
-};
-
-/* Maximum number of times to retry failed transactions */
-#define MAX_RETRIES		3
-
-/* Maximum number of hardware channels supported by the USB block */
-#define MAX_CHANNELS		8
-
-/*
- * The low level hardware can transfer a maximum of this number of bytes in each
- * transfer. The field is 19 bits wide
- */
-#define MAX_TRANSFER_BYTES	((1 << 19) - 1)
-
-/*
- * The low level hardware can transfer a maximum of this number of packets in
- * each transfer. The field is 10 bits wide
- */
-#define MAX_TRANSFER_PACKETS	((1 << 10) - 1)
-
-/**
- * Logical transactions may take numerous low level
- * transactions, especially when splits are concerned. This
- * enum represents all of the possible stages a transaction can
- * be in. Note that split completes are always even. This is so
- * the NAK handler can backup to the previous low level
- * transaction with a simple clearing of bit 0.
- */
-enum cvmx_usb_stage {
-	CVMX_USB_STAGE_NON_CONTROL,
-	CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE,
-	CVMX_USB_STAGE_SETUP,
-	CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE,
-	CVMX_USB_STAGE_DATA,
-	CVMX_USB_STAGE_DATA_SPLIT_COMPLETE,
-	CVMX_USB_STAGE_STATUS,
-	CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE,
-};
-
-/**
- * struct cvmx_usb_transaction - describes each pending USB transaction
- *				 regardless of type. These are linked together
- *				 to form a list of pending requests for a pipe.
- *
- * @node:		List node for transactions in the pipe.
- * @type:		Type of transaction, duplicated of the pipe.
- * @flags:		State flags for this transaction.
- * @buffer:		User's physical buffer address to read/write.
- * @buffer_length:	Size of the user's buffer in bytes.
- * @control_header:	For control transactions, physical address of the 8
- *			byte standard header.
- * @iso_start_frame:	For ISO transactions, the starting frame number.
- * @iso_number_packets:	For ISO transactions, the number of packets in the
- *			request.
- * @iso_packets:	For ISO transactions, the sub packets in the request.
- * @actual_bytes:	Actual bytes transfer for this transaction.
- * @stage:		For control transactions, the current stage.
- * @urb:		URB.
- */
-struct cvmx_usb_transaction {
-	struct list_head node;
-	enum cvmx_usb_transfer type;
-	u64 buffer;
-	int buffer_length;
-	u64 control_header;
-	int iso_start_frame;
-	int iso_number_packets;
-	struct cvmx_usb_iso_packet *iso_packets;
-	int xfersize;
-	int pktcnt;
-	int retries;
-	int actual_bytes;
-	enum cvmx_usb_stage stage;
-	struct urb *urb;
-};
-
-/**
- * struct cvmx_usb_pipe - a pipe represents a virtual connection between Octeon
- *			  and some USB device. It contains a list of pending
- *			  request to the device.
- *
- * @node:		List node for pipe list
- * @next:		Pipe after this one in the list
- * @transactions:	List of pending transactions
- * @interval:		For periodic pipes, the interval between packets in
- *			frames
- * @next_tx_frame:	The next frame this pipe is allowed to transmit on
- * @flags:		State flags for this pipe
- * @device_speed:	Speed of device connected to this pipe
- * @transfer_type:	Type of transaction supported by this pipe
- * @transfer_dir:	IN or OUT. Ignored for Control
- * @multi_count:	Max packet in a row for the device
- * @max_packet:		The device's maximum packet size in bytes
- * @device_addr:	USB device address at other end of pipe
- * @endpoint_num:	USB endpoint number at other end of pipe
- * @hub_device_addr:	Hub address this device is connected to
- * @hub_port:		Hub port this device is connected to
- * @pid_toggle:		This toggles between 0/1 on every packet send to track
- *			the data pid needed
- * @channel:		Hardware DMA channel for this pipe
- * @split_sc_frame:	The low order bits of the frame number the split
- *			complete should be sent on
- */
-struct cvmx_usb_pipe {
-	struct list_head node;
-	struct list_head transactions;
-	u64 interval;
-	u64 next_tx_frame;
-	enum cvmx_usb_pipe_flags flags;
-	enum cvmx_usb_speed device_speed;
-	enum cvmx_usb_transfer transfer_type;
-	enum cvmx_usb_direction transfer_dir;
-	int multi_count;
-	u16 max_packet;
-	u8 device_addr;
-	u8 endpoint_num;
-	u8 hub_device_addr;
-	u8 hub_port;
-	u8 pid_toggle;
-	u8 channel;
-	s8 split_sc_frame;
-};
-
-struct cvmx_usb_tx_fifo {
-	struct {
-		int channel;
-		int size;
-		u64 address;
-	} entry[MAX_CHANNELS + 1];
-	int head;
-	int tail;
-};
-
-/**
- * struct octeon_hcd - the state of the USB block
- *
- * lock:		   Serialization lock.
- * init_flags:		   Flags passed to initialize.
- * index:		   Which USB block this is for.
- * idle_hardware_channels: Bit set for every idle hardware channel.
- * usbcx_hprt:		   Stored port status so we don't need to read a CSR to
- *			   determine splits.
- * pipe_for_channel:	   Map channels to pipes.
- * pipe:		   Storage for pipes.
- * indent:		   Used by debug output to indent functions.
- * port_status:		   Last port status used for change notification.
- * idle_pipes:		   List of open pipes that have no transactions.
- * active_pipes:	   Active pipes indexed by transfer type.
- * frame_number:	   Increments every SOF interrupt for time keeping.
- * active_split:	   Points to the current active split, or NULL.
- */
-struct octeon_hcd {
-	spinlock_t lock; /* serialization lock */
-	int init_flags;
-	int index;
-	int idle_hardware_channels;
-	union cvmx_usbcx_hprt usbcx_hprt;
-	struct cvmx_usb_pipe *pipe_for_channel[MAX_CHANNELS];
-	int indent;
-	struct cvmx_usb_port_status port_status;
-	struct list_head idle_pipes;
-	struct list_head active_pipes[4];
-	u64 frame_number;
-	struct cvmx_usb_transaction *active_split;
-	struct cvmx_usb_tx_fifo periodic;
-	struct cvmx_usb_tx_fifo nonperiodic;
-};
-
-/*
- * This macro logically sets a single field in a CSR. It does the sequence
- * read, modify, and write
- */
-#define USB_SET_FIELD32(address, _union, field, value)		\
-	do {							\
-		union _union c;					\
-								\
-		c.u32 = cvmx_usb_read_csr32(usb, address);	\
-		c.s.field = value;				\
-		cvmx_usb_write_csr32(usb, address, c.u32);	\
-	} while (0)
-
-/* Returns the IO address to push/pop stuff data from the FIFOs */
-#define USB_FIFO_ADDRESS(channel, usb_index) \
-	(CVMX_USBCX_GOTGCTL(usb_index) + ((channel) + 1) * 0x1000)
-
-/**
- * struct octeon_temp_buffer - a bounce buffer for USB transfers
- * @orig_buffer: the original buffer passed by the USB stack
- * @data:	 the newly allocated temporary buffer (excluding meta-data)
- *
- * Both the DMA engine and FIFO mode will always transfer full 32-bit words. If
- * the buffer is too short, we need to allocate a temporary one, and this struct
- * represents it.
- */
-struct octeon_temp_buffer {
-	void *orig_buffer;
-	u8 data[];
-};
-
-static inline struct usb_hcd *octeon_to_hcd(struct octeon_hcd *p)
-{
-	return container_of((void *)p, struct usb_hcd, hcd_priv);
-}
-
-/**
- * octeon_alloc_temp_buffer - allocate a temporary buffer for USB transfer
- *                            (if needed)
- * @urb:	URB.
- * @mem_flags:	Memory allocation flags.
- *
- * This function allocates a temporary bounce buffer whenever it's needed
- * due to HW limitations.
- */
-static int octeon_alloc_temp_buffer(struct urb *urb, gfp_t mem_flags)
-{
-	struct octeon_temp_buffer *temp;
-
-	if (urb->num_sgs || urb->sg ||
-	    (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) ||
-	    !(urb->transfer_buffer_length % sizeof(u32)))
-		return 0;
-
-	temp = kmalloc(ALIGN(urb->transfer_buffer_length, sizeof(u32)) +
-		       sizeof(*temp), mem_flags);
-	if (!temp)
-		return -ENOMEM;
-
-	temp->orig_buffer = urb->transfer_buffer;
-	if (usb_urb_dir_out(urb))
-		memcpy(temp->data, urb->transfer_buffer,
-		       urb->transfer_buffer_length);
-	urb->transfer_buffer = temp->data;
-	urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER;
-
-	return 0;
-}
-
-/**
- * octeon_free_temp_buffer - free a temporary buffer used by USB transfers.
- * @urb: URB.
- *
- * Frees a buffer allocated by octeon_alloc_temp_buffer().
- */
-static void octeon_free_temp_buffer(struct urb *urb)
-{
-	struct octeon_temp_buffer *temp;
-	size_t length;
-
-	if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER))
-		return;
-
-	temp = container_of(urb->transfer_buffer, struct octeon_temp_buffer,
-			    data);
-	if (usb_urb_dir_in(urb)) {
-		if (usb_pipeisoc(urb->pipe))
-			length = urb->transfer_buffer_length;
-		else
-			length = urb->actual_length;
-
-		memcpy(temp->orig_buffer, urb->transfer_buffer, length);
-	}
-	urb->transfer_buffer = temp->orig_buffer;
-	urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER;
-	kfree(temp);
-}
-
-/**
- * octeon_map_urb_for_dma - Octeon-specific map_urb_for_dma().
- * @hcd:	USB HCD structure.
- * @urb:	URB.
- * @mem_flags:	Memory allocation flags.
- */
-static int octeon_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
-				  gfp_t mem_flags)
-{
-	int ret;
-
-	ret = octeon_alloc_temp_buffer(urb, mem_flags);
-	if (ret)
-		return ret;
-
-	ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
-	if (ret)
-		octeon_free_temp_buffer(urb);
-
-	return ret;
-}
-
-/**
- * octeon_unmap_urb_for_dma - Octeon-specific unmap_urb_for_dma()
- * @hcd:	USB HCD structure.
- * @urb:	URB.
- */
-static void octeon_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
-{
-	usb_hcd_unmap_urb_for_dma(hcd, urb);
-	octeon_free_temp_buffer(urb);
-}
-
-/**
- * Read a USB 32bit CSR. It performs the necessary address swizzle
- * for 32bit CSRs and logs the value in a readable format if
- * debugging is on.
- *
- * @usb:     USB block this access is for
- * @address: 64bit address to read
- *
- * Returns: Result of the read
- */
-static inline u32 cvmx_usb_read_csr32(struct octeon_hcd *usb, u64 address)
-{
-	return cvmx_read64_uint32(address ^ 4);
-}
-
-/**
- * Write a USB 32bit CSR. It performs the necessary address
- * swizzle for 32bit CSRs and logs the value in a readable format
- * if debugging is on.
- *
- * @usb:     USB block this access is for
- * @address: 64bit address to write
- * @value:   Value to write
- */
-static inline void cvmx_usb_write_csr32(struct octeon_hcd *usb,
-					u64 address, u32 value)
-{
-	cvmx_write64_uint32(address ^ 4, value);
-	cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index));
-}
-
-/**
- * Return non zero if this pipe connects to a non HIGH speed
- * device through a high speed hub.
- *
- * @usb:    USB block this access is for
- * @pipe:   Pipe to check
- *
- * Returns: Non zero if we need to do split transactions
- */
-static inline int cvmx_usb_pipe_needs_split(struct octeon_hcd *usb,
-					    struct cvmx_usb_pipe *pipe)
-{
-	return pipe->device_speed != CVMX_USB_SPEED_HIGH &&
-	       usb->usbcx_hprt.s.prtspd == CVMX_USB_SPEED_HIGH;
-}
-
-/**
- * Trivial utility function to return the correct PID for a pipe
- *
- * @pipe:   pipe to check
- *
- * Returns: PID for pipe
- */
-static inline int cvmx_usb_get_data_pid(struct cvmx_usb_pipe *pipe)
-{
-	if (pipe->pid_toggle)
-		return 2; /* Data1 */
-	return 0; /* Data0 */
-}
-
-/* Loops through register until txfflsh or rxfflsh become zero.*/
-static int cvmx_wait_tx_rx(struct octeon_hcd *usb, int fflsh_type)
-{
-	int result;
-	u64 address = CVMX_USBCX_GRSTCTL(usb->index);
-	u64 done = cvmx_get_cycle() + 100 *
-		   (u64)octeon_get_clock_rate / 1000000;
-	union cvmx_usbcx_grstctl c;
-
-	while (1) {
-		c.u32 = cvmx_usb_read_csr32(usb, address);
-		if (fflsh_type == 0 && c.s.txfflsh == 0) {
-			result = 0;
-			break;
-		} else if (fflsh_type == 1 && c.s.rxfflsh == 0) {
-			result = 0;
-			break;
-		} else if (cvmx_get_cycle() > done) {
-			result = -1;
-			break;
-		}
-
-		__delay(100);
-	}
-	return result;
-}
-
-static void cvmx_fifo_setup(struct octeon_hcd *usb)
-{
-	union cvmx_usbcx_ghwcfg3 usbcx_ghwcfg3;
-	union cvmx_usbcx_gnptxfsiz npsiz;
-	union cvmx_usbcx_hptxfsiz psiz;
-
-	usbcx_ghwcfg3.u32 = cvmx_usb_read_csr32(usb,
-						CVMX_USBCX_GHWCFG3(usb->index));
-
-	/*
-	 * Program the USBC_GRXFSIZ register to select the size of the receive
-	 * FIFO (25%).
-	 */
-	USB_SET_FIELD32(CVMX_USBCX_GRXFSIZ(usb->index), cvmx_usbcx_grxfsiz,
-			rxfdep, usbcx_ghwcfg3.s.dfifodepth / 4);
-
-	/*
-	 * Program the USBC_GNPTXFSIZ register to select the size and the start
-	 * address of the non-periodic transmit FIFO for nonperiodic
-	 * transactions (50%).
-	 */
-	npsiz.u32 = cvmx_usb_read_csr32(usb, CVMX_USBCX_GNPTXFSIZ(usb->index));
-	npsiz.s.nptxfdep = usbcx_ghwcfg3.s.dfifodepth / 2;
-	npsiz.s.nptxfstaddr = usbcx_ghwcfg3.s.dfifodepth / 4;
-	cvmx_usb_write_csr32(usb, CVMX_USBCX_GNPTXFSIZ(usb->index), npsiz.u32);
-
-	/*
-	 * Program the USBC_HPTXFSIZ register to select the size and start
-	 * address of the periodic transmit FIFO for periodic transactions
-	 * (25%).
-	 */
-	psiz.u32 = cvmx_usb_read_csr32(usb, CVMX_USBCX_HPTXFSIZ(usb->index));
-	psiz.s.ptxfsize = usbcx_ghwcfg3.s.dfifodepth / 4;
-	psiz.s.ptxfstaddr = 3 * usbcx_ghwcfg3.s.dfifodepth / 4;
-	cvmx_usb_write_csr32(usb, CVMX_USBCX_HPTXFSIZ(usb->index), psiz.u32);
-
-	/* Flush all FIFOs */
-	USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index),
-			cvmx_usbcx_grstctl, txfnum, 0x10);
-	USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index),
-			cvmx_usbcx_grstctl, txfflsh, 1);
-	cvmx_wait_tx_rx(usb, 0);
-	USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index),
-			cvmx_usbcx_grstctl, rxfflsh, 1);
-	cvmx_wait_tx_rx(usb, 1);
-}
-
-/**
- * Shutdown a USB port after a call to cvmx_usb_initialize().
- * The port should be disabled with all pipes closed when this
- * function is called.
- *
- * @usb: USB device state populated by cvmx_usb_initialize().
- *
- * Returns: 0 or a negative error code.
- */
-static int cvmx_usb_shutdown(struct octeon_hcd *usb)
-{
-	union cvmx_usbnx_clk_ctl usbn_clk_ctl;
-
-	/* Make sure all pipes are closed */
-	if (!list_empty(&usb->idle_pipes) ||
-	    !list_empty(&usb->active_pipes[CVMX_USB_TRANSFER_ISOCHRONOUS]) ||
-	    !list_empty(&usb->active_pipes[CVMX_USB_TRANSFER_INTERRUPT]) ||
-	    !list_empty(&usb->active_pipes[CVMX_USB_TRANSFER_CONTROL]) ||
-	    !list_empty(&usb->active_pipes[CVMX_USB_TRANSFER_BULK]))
-		return -EBUSY;
-
-	/* Disable the clocks and put them in power on reset */
-	usbn_clk_ctl.u64 = cvmx_read64_uint64(CVMX_USBNX_CLK_CTL(usb->index));
-	usbn_clk_ctl.s.enable = 1;
-	usbn_clk_ctl.s.por = 1;
-	usbn_clk_ctl.s.hclk_rst = 1;
-	usbn_clk_ctl.s.prst = 0;
-	usbn_clk_ctl.s.hrst = 0;
-	cvmx_write64_uint64(CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64);
-	return 0;
-}
-
-/**
- * Initialize a USB port for use. This must be called before any
- * other access to the Octeon USB port is made. The port starts
- * off in the disabled state.
- *
- * @dev:	 Pointer to struct device for logging purposes.
- * @usb:	 Pointer to struct octeon_hcd.
- *
- * Returns: 0 or a negative error code.
- */
-static int cvmx_usb_initialize(struct device *dev,
-			       struct octeon_hcd *usb)
-{
-	int channel;
-	int divisor;
-	int retries = 0;
-	union cvmx_usbcx_hcfg usbcx_hcfg;
-	union cvmx_usbnx_clk_ctl usbn_clk_ctl;
-	union cvmx_usbcx_gintsts usbc_gintsts;
-	union cvmx_usbcx_gahbcfg usbcx_gahbcfg;
-	union cvmx_usbcx_gintmsk usbcx_gintmsk;
-	union cvmx_usbcx_gusbcfg usbcx_gusbcfg;
-	union cvmx_usbnx_usbp_ctl_status usbn_usbp_ctl_status;
-
-retry:
-	/*
-	 * Power On Reset and PHY Initialization
-	 *
-	 * 1. Wait for DCOK to assert (nothing to do)
-	 *
-	 * 2a. Write USBN0/1_CLK_CTL[POR] = 1 and
-	 *     USBN0/1_CLK_CTL[HRST,PRST,HCLK_RST] = 0
-	 */
-	usbn_clk_ctl.u64 = cvmx_read64_uint64(CVMX_USBNX_CLK_CTL(usb->index));
-	usbn_clk_ctl.s.por = 1;
-	usbn_clk_ctl.s.hrst = 0;
-	usbn_clk_ctl.s.prst = 0;
-	usbn_clk_ctl.s.hclk_rst = 0;
-	usbn_clk_ctl.s.enable = 0;
-	/*
-	 * 2b. Select the USB reference clock/crystal parameters by writing
-	 *     appropriate values to USBN0/1_CLK_CTL[P_C_SEL, P_RTYPE, P_COM_ON]
-	 */
-	if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND) {
-		/*
-		 * The USB port uses 12/24/48MHz 2.5V board clock
-		 * source at USB_XO. USB_XI should be tied to GND.
-		 * Most Octeon evaluation boards require this setting
-		 */
-		if (OCTEON_IS_MODEL(OCTEON_CN3XXX) ||
-		    OCTEON_IS_MODEL(OCTEON_CN56XX) ||
-		    OCTEON_IS_MODEL(OCTEON_CN50XX))
-			/* From CN56XX,CN50XX,CN31XX,CN30XX manuals */
-			usbn_clk_ctl.s.p_rtype = 2; /* p_rclk=1 & p_xenbn=0 */
-		else
-			/* From CN52XX manual */
-			usbn_clk_ctl.s.p_rtype = 1;
-
-		switch (usb->init_flags &
-			CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK) {
-		case CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ:
-			usbn_clk_ctl.s.p_c_sel = 0;
-			break;
-		case CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ:
-			usbn_clk_ctl.s.p_c_sel = 1;
-			break;
-		case CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ:
-			usbn_clk_ctl.s.p_c_sel = 2;
-			break;
-		}
-	} else {
-		/*
-		 * The USB port uses a 12MHz crystal as clock source
-		 * at USB_XO and USB_XI
-		 */
-		if (OCTEON_IS_MODEL(OCTEON_CN3XXX))
-			/* From CN31XX,CN30XX manual */
-			usbn_clk_ctl.s.p_rtype = 3; /* p_rclk=1 & p_xenbn=1 */
-		else
-			/* From CN56XX,CN52XX,CN50XX manuals. */
-			usbn_clk_ctl.s.p_rtype = 0;
-
-		usbn_clk_ctl.s.p_c_sel = 0;
-	}
-	/*
-	 * 2c. Select the HCLK via writing USBN0/1_CLK_CTL[DIVIDE, DIVIDE2] and
-	 *     setting USBN0/1_CLK_CTL[ENABLE] = 1. Divide the core clock down
-	 *     such that USB is as close as possible to 125Mhz
-	 */
-	divisor = DIV_ROUND_UP(octeon_get_clock_rate(), 125000000);
-	/* Lower than 4 doesn't seem to work properly */
-	if (divisor < 4)
-		divisor = 4;
-	usbn_clk_ctl.s.divide = divisor;
-	usbn_clk_ctl.s.divide2 = 0;
-	cvmx_write64_uint64(CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64);
-
-	/* 2d. Write USBN0/1_CLK_CTL[HCLK_RST] = 1 */
-	usbn_clk_ctl.s.hclk_rst = 1;
-	cvmx_write64_uint64(CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64);
-	/* 2e.  Wait 64 core-clock cycles for HCLK to stabilize */
-	__delay(64);
-	/*
-	 * 3. Program the power-on reset field in the USBN clock-control
-	 *    register:
-	 *    USBN_CLK_CTL[POR] = 0
-	 */
-	usbn_clk_ctl.s.por = 0;
-	cvmx_write64_uint64(CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64);
-	/* 4. Wait 1 ms for PHY clock to start */
-	mdelay(1);
-	/*
-	 * 5. Program the Reset input from automatic test equipment field in the
-	 *    USBP control and status register:
-	 *    USBN_USBP_CTL_STATUS[ATE_RESET] = 1
-	 */
-	usbn_usbp_ctl_status.u64 =
-		cvmx_read64_uint64(CVMX_USBNX_USBP_CTL_STATUS(usb->index));
-	usbn_usbp_ctl_status.s.ate_reset = 1;
-	cvmx_write64_uint64(CVMX_USBNX_USBP_CTL_STATUS(usb->index),
-			    usbn_usbp_ctl_status.u64);
-	/* 6. Wait 10 cycles */
-	__delay(10);
-	/*
-	 * 7. Clear ATE_RESET field in the USBN clock-control register:
-	 *    USBN_USBP_CTL_STATUS[ATE_RESET] = 0
-	 */
-	usbn_usbp_ctl_status.s.ate_reset = 0;
-	cvmx_write64_uint64(CVMX_USBNX_USBP_CTL_STATUS(usb->index),
-			    usbn_usbp_ctl_status.u64);
-	/*
-	 * 8. Program the PHY reset field in the USBN clock-control register:
-	 *    USBN_CLK_CTL[PRST] = 1
-	 */
-	usbn_clk_ctl.s.prst = 1;
-	cvmx_write64_uint64(CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64);
-	/*
-	 * 9. Program the USBP control and status register to select host or
-	 *    device mode. USBN_USBP_CTL_STATUS[HST_MODE] = 0 for host, = 1 for
-	 *    device
-	 */
-	usbn_usbp_ctl_status.s.hst_mode = 0;
-	cvmx_write64_uint64(CVMX_USBNX_USBP_CTL_STATUS(usb->index),
-			    usbn_usbp_ctl_status.u64);
-	/* 10. Wait 1 us */
-	udelay(1);
-	/*
-	 * 11. Program the hreset_n field in the USBN clock-control register:
-	 *     USBN_CLK_CTL[HRST] = 1
-	 */
-	usbn_clk_ctl.s.hrst = 1;
-	cvmx_write64_uint64(CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64);
-	/* 12. Proceed to USB core initialization */
-	usbn_clk_ctl.s.enable = 1;
-	cvmx_write64_uint64(CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64);
-	udelay(1);
-
-	/*
-	 * USB Core Initialization
-	 *
-	 * 1. Read USBC_GHWCFG1, USBC_GHWCFG2, USBC_GHWCFG3, USBC_GHWCFG4 to
-	 *    determine USB core configuration parameters.
-	 *
-	 *    Nothing needed
-	 *
-	 * 2. Program the following fields in the global AHB configuration
-	 *    register (USBC_GAHBCFG)
-	 *    DMA mode, USBC_GAHBCFG[DMAEn]: 1 = DMA mode, 0 = slave mode
-	 *    Burst length, USBC_GAHBCFG[HBSTLEN] = 0
-	 *    Nonperiodic TxFIFO empty level (slave mode only),
-	 *    USBC_GAHBCFG[NPTXFEMPLVL]
-	 *    Periodic TxFIFO empty level (slave mode only),
-	 *    USBC_GAHBCFG[PTXFEMPLVL]
-	 *    Global interrupt mask, USBC_GAHBCFG[GLBLINTRMSK] = 1
-	 */
-	usbcx_gahbcfg.u32 = 0;
-	usbcx_gahbcfg.s.dmaen = !(usb->init_flags &
-				  CVMX_USB_INITIALIZE_FLAGS_NO_DMA);
-	usbcx_gahbcfg.s.hbstlen = 0;
-	usbcx_gahbcfg.s.nptxfemplvl = 1;
-	usbcx_gahbcfg.s.ptxfemplvl = 1;
-	usbcx_gahbcfg.s.glblintrmsk = 1;
-	cvmx_usb_write_csr32(usb, CVMX_USBCX_GAHBCFG(usb->index),
-			     usbcx_gahbcfg.u32);
-
-	/*
-	 * 3. Program the following fields in USBC_GUSBCFG register.
-	 *    HS/FS timeout calibration, USBC_GUSBCFG[TOUTCAL] = 0
-	 *    ULPI DDR select, USBC_GUSBCFG[DDRSEL] = 0
-	 *    USB turnaround time, USBC_GUSBCFG[USBTRDTIM] = 0x5
-	 *    PHY low-power clock select, USBC_GUSBCFG[PHYLPWRCLKSEL] = 0
-	 */
-	usbcx_gusbcfg.u32 = cvmx_usb_read_csr32(usb,
-						CVMX_USBCX_GUSBCFG(usb->index));
-	usbcx_gusbcfg.s.toutcal = 0;
-	usbcx_gusbcfg.s.ddrsel = 0;
-	usbcx_gusbcfg.s.usbtrdtim = 0x5;
-	usbcx_gusbcfg.s.phylpwrclksel = 0;
-	cvmx_usb_write_csr32(usb, CVMX_USBCX_GUSBCFG(usb->index),
-			     usbcx_gusbcfg.u32);
-
-	/*
-	 * 4. The software must unmask the following bits in the USBC_GINTMSK
-	 *    register.
-	 *    OTG interrupt mask, USBC_GINTMSK[OTGINTMSK] = 1
-	 *    Mode mismatch interrupt mask, USBC_GINTMSK[MODEMISMSK] = 1
-	 */
-	usbcx_gintmsk.u32 = cvmx_usb_read_csr32(usb,
-						CVMX_USBCX_GINTMSK(usb->index));
-	usbcx_gintmsk.s.otgintmsk = 1;
-	usbcx_gintmsk.s.modemismsk = 1;
-	usbcx_gintmsk.s.hchintmsk = 1;
-	usbcx_gintmsk.s.sofmsk = 0;
-	/* We need RX FIFO interrupts if we don't have DMA */
-	if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
-		usbcx_gintmsk.s.rxflvlmsk = 1;
-	cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTMSK(usb->index),
-			     usbcx_gintmsk.u32);
-
-	/*
-	 * Disable all channel interrupts. We'll enable them per channel later.
-	 */
-	for (channel = 0; channel < 8; channel++)
-		cvmx_usb_write_csr32(usb,
-				     CVMX_USBCX_HCINTMSKX(channel, usb->index),
-				     0);
-
-	/*
-	 * Host Port Initialization
-	 *
-	 * 1. Program the host-port interrupt-mask field to unmask,
-	 *    USBC_GINTMSK[PRTINT] = 1
-	 */
-	USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index),
-			cvmx_usbcx_gintmsk, prtintmsk, 1);
-	USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index),
-			cvmx_usbcx_gintmsk, disconnintmsk, 1);
-
-	/*
-	 * 2. Program the USBC_HCFG register to select full-speed host
-	 *    or high-speed host.
-	 */
-	usbcx_hcfg.u32 = cvmx_usb_read_csr32(usb, CVMX_USBCX_HCFG(usb->index));
-	usbcx_hcfg.s.fslssupp = 0;
-	usbcx_hcfg.s.fslspclksel = 0;
-	cvmx_usb_write_csr32(usb, CVMX_USBCX_HCFG(usb->index), usbcx_hcfg.u32);
-
-	cvmx_fifo_setup(usb);
-
-	/*
-	 * If the controller is getting port events right after the reset, it
-	 * means the initialization failed. Try resetting the controller again
-	 * in such case. This is seen to happen after cold boot on DSR-1000N.
-	 */
-	usbc_gintsts.u32 = cvmx_usb_read_csr32(usb,
-					       CVMX_USBCX_GINTSTS(usb->index));
-	cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTSTS(usb->index),
-			     usbc_gintsts.u32);
-	dev_dbg(dev, "gintsts after reset: 0x%x\n", (int)usbc_gintsts.u32);
-	if (!usbc_gintsts.s.disconnint && !usbc_gintsts.s.prtint)
-		return 0;
-	if (retries++ >= 5)
-		return -EAGAIN;
-	dev_info(dev, "controller reset failed (gintsts=0x%x) - retrying\n",
-		 (int)usbc_gintsts.u32);
-	msleep(50);
-	cvmx_usb_shutdown(usb);
-	msleep(50);
-	goto retry;
-}
-
-/**
- * Reset a USB port. After this call succeeds, the USB port is
- * online and servicing requests.
- *
- * @usb: USB device state populated by cvmx_usb_initialize().
- */
-static void cvmx_usb_reset_port(struct octeon_hcd *usb)
-{
-	usb->usbcx_hprt.u32 = cvmx_usb_read_csr32(usb,
-						  CVMX_USBCX_HPRT(usb->index));
-
-	/* Program the port reset bit to start the reset process */
-	USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt,
-			prtrst, 1);
-
-	/*
-	 * Wait at least 50ms (high speed), or 10ms (full speed) for the reset
-	 * process to complete.
-	 */
-	mdelay(50);
-
-	/* Program the port reset bit to 0, USBC_HPRT[PRTRST] = 0 */
-	USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt,
-			prtrst, 0);
-
-	/*
-	 * Read the port speed field to get the enumerated speed,
-	 * USBC_HPRT[PRTSPD].
-	 */
-	usb->usbcx_hprt.u32 = cvmx_usb_read_csr32(usb,
-						  CVMX_USBCX_HPRT(usb->index));
-}
-
-/**
- * Disable a USB port. After this call the USB port will not
- * generate data transfers and will not generate events.
- * Transactions in process will fail and call their
- * associated callbacks.
- *
- * @usb: USB device state populated by cvmx_usb_initialize().
- *
- * Returns: 0 or a negative error code.
- */
-static int cvmx_usb_disable(struct octeon_hcd *usb)
-{
-	/* Disable the port */
-	USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt,
-			prtena, 1);
-	return 0;
-}
-
-/**
- * Get the current state of the USB port. Use this call to
- * determine if the usb port has anything connected, is enabled,
- * or has some sort of error condition. The return value of this
- * call has "changed" bits to signal of the value of some fields
- * have changed between calls.
- *
- * @usb: USB device state populated by cvmx_usb_initialize().
- *
- * Returns: Port status information
- */
-static struct cvmx_usb_port_status cvmx_usb_get_status(struct octeon_hcd *usb)
-{
-	union cvmx_usbcx_hprt usbc_hprt;
-	struct cvmx_usb_port_status result;
-
-	memset(&result, 0, sizeof(result));
-
-	usbc_hprt.u32 = cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index));
-	result.port_enabled = usbc_hprt.s.prtena;
-	result.port_over_current = usbc_hprt.s.prtovrcurract;
-	result.port_powered = usbc_hprt.s.prtpwr;
-	result.port_speed = usbc_hprt.s.prtspd;
-	result.connected = usbc_hprt.s.prtconnsts;
-	result.connect_change =
-		result.connected != usb->port_status.connected;
-
-	return result;
-}
-
-/**
- * Open a virtual pipe between the host and a USB device. A pipe
- * must be opened before data can be transferred between a device
- * and Octeon.
- *
- * @usb:	     USB device state populated by cvmx_usb_initialize().
- * @device_addr:
- *		     USB device address to open the pipe to
- *		     (0-127).
- * @endpoint_num:
- *		     USB endpoint number to open the pipe to
- *		     (0-15).
- * @device_speed:
- *		     The speed of the device the pipe is going
- *		     to. This must match the device's speed,
- *		     which may be different than the port speed.
- * @max_packet:	     The maximum packet length the device can
- *		     transmit/receive (low speed=0-8, full
- *		     speed=0-1023, high speed=0-1024). This value
- *		     comes from the standard endpoint descriptor
- *		     field wMaxPacketSize bits <10:0>.
- * @transfer_type:
- *		     The type of transfer this pipe is for.
- * @transfer_dir:
- *		     The direction the pipe is in. This is not
- *		     used for control pipes.
- * @interval:	     For ISOCHRONOUS and INTERRUPT transfers,
- *		     this is how often the transfer is scheduled
- *		     for. All other transfers should specify
- *		     zero. The units are in frames (8000/sec at
- *		     high speed, 1000/sec for full speed).
- * @multi_count:
- *		     For high speed devices, this is the maximum
- *		     allowed number of packet per microframe.
- *		     Specify zero for non high speed devices. This
- *		     value comes from the standard endpoint descriptor
- *		     field wMaxPacketSize bits <12:11>.
- * @hub_device_addr:
- *		     Hub device address this device is connected
- *		     to. Devices connected directly to Octeon
- *		     use zero. This is only used when the device
- *		     is full/low speed behind a high speed hub.
- *		     The address will be of the high speed hub,
- *		     not and full speed hubs after it.
- * @hub_port:	     Which port on the hub the device is
- *		     connected. Use zero for devices connected
- *		     directly to Octeon. Like hub_device_addr,
- *		     this is only used for full/low speed
- *		     devices behind a high speed hub.
- *
- * Returns: A non-NULL value is a pipe. NULL means an error.
- */
-static struct cvmx_usb_pipe *cvmx_usb_open_pipe(struct octeon_hcd *usb,
-						int device_addr,
-						int endpoint_num,
-						enum cvmx_usb_speed
-							device_speed,
-						int max_packet,
-						enum cvmx_usb_transfer
-							transfer_type,
-						enum cvmx_usb_direction
-							transfer_dir,
-						int interval, int multi_count,
-						int hub_device_addr,
-						int hub_port)
-{
-	struct cvmx_usb_pipe *pipe;
-
-	pipe = kzalloc(sizeof(*pipe), GFP_ATOMIC);
-	if (!pipe)
-		return NULL;
-	if ((device_speed == CVMX_USB_SPEED_HIGH) &&
-	    (transfer_dir == CVMX_USB_DIRECTION_OUT) &&
-	    (transfer_type == CVMX_USB_TRANSFER_BULK))
-		pipe->flags |= CVMX_USB_PIPE_FLAGS_NEED_PING;
-	pipe->device_addr = device_addr;
-	pipe->endpoint_num = endpoint_num;
-	pipe->device_speed = device_speed;
-	pipe->max_packet = max_packet;
-	pipe->transfer_type = transfer_type;
-	pipe->transfer_dir = transfer_dir;
-	INIT_LIST_HEAD(&pipe->transactions);
-
-	/*
-	 * All pipes use interval to rate limit NAK processing. Force an
-	 * interval if one wasn't supplied
-	 */
-	if (!interval)
-		interval = 1;
-	if (cvmx_usb_pipe_needs_split(usb, pipe)) {
-		pipe->interval = interval * 8;
-		/* Force start splits to be schedule on uFrame 0 */
-		pipe->next_tx_frame = ((usb->frame_number + 7) & ~7) +
-					pipe->interval;
-	} else {
-		pipe->interval = interval;
-		pipe->next_tx_frame = usb->frame_number + pipe->interval;
-	}
-	pipe->multi_count = multi_count;
-	pipe->hub_device_addr = hub_device_addr;
-	pipe->hub_port = hub_port;
-	pipe->pid_toggle = 0;
-	pipe->split_sc_frame = -1;
-	list_add_tail(&pipe->node, &usb->idle_pipes);
-
-	/*
-	 * We don't need to tell the hardware about this pipe yet since
-	 * it doesn't have any submitted requests
-	 */
-
-	return pipe;
-}
-
-/**
- * Poll the RX FIFOs and remove data as needed. This function is only used
- * in non DMA mode. It is very important that this function be called quickly
- * enough to prevent FIFO overflow.
- *
- * @usb:	USB device state populated by cvmx_usb_initialize().
- */
-static void cvmx_usb_poll_rx_fifo(struct octeon_hcd *usb)
-{
-	union cvmx_usbcx_grxstsph rx_status;
-	int channel;
-	int bytes;
-	u64 address;
-	u32 *ptr;
-
-	rx_status.u32 = cvmx_usb_read_csr32(usb,
-					    CVMX_USBCX_GRXSTSPH(usb->index));
-	/* Only read data if IN data is there */
-	if (rx_status.s.pktsts != 2)
-		return;
-	/* Check if no data is available */
-	if (!rx_status.s.bcnt)
-		return;
-
-	channel = rx_status.s.chnum;
-	bytes = rx_status.s.bcnt;
-	if (!bytes)
-		return;
-
-	/* Get where the DMA engine would have written this data */
-	address = cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index) +
-				     channel * 8);
-
-	ptr = cvmx_phys_to_ptr(address);
-	cvmx_write64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index) + channel * 8,
-			    address + bytes);
-
-	/* Loop writing the FIFO data for this packet into memory */
-	while (bytes > 0) {
-		*ptr++ = cvmx_usb_read_csr32(usb,
-					USB_FIFO_ADDRESS(channel, usb->index));
-		bytes -= 4;
-	}
-	CVMX_SYNCW;
-}
-
-/**
- * Fill the TX hardware fifo with data out of the software
- * fifos
- *
- * @usb:	    USB device state populated by cvmx_usb_initialize().
- * @fifo:	    Software fifo to use
- * @available:	    Amount of space in the hardware fifo
- *
- * Returns: Non zero if the hardware fifo was too small and needs
- *	    to be serviced again.
- */
-static int cvmx_usb_fill_tx_hw(struct octeon_hcd *usb,
-			       struct cvmx_usb_tx_fifo *fifo, int available)
-{
-	/*
-	 * We're done either when there isn't anymore space or the software FIFO
-	 * is empty
-	 */
-	while (available && (fifo->head != fifo->tail)) {
-		int i = fifo->tail;
-		const u32 *ptr = cvmx_phys_to_ptr(fifo->entry[i].address);
-		u64 csr_address = USB_FIFO_ADDRESS(fifo->entry[i].channel,
-						   usb->index) ^ 4;
-		int words = available;
-
-		/* Limit the amount of data to what the SW fifo has */
-		if (fifo->entry[i].size <= available) {
-			words = fifo->entry[i].size;
-			fifo->tail++;
-			if (fifo->tail > MAX_CHANNELS)
-				fifo->tail = 0;
-		}
-
-		/* Update the next locations and counts */
-		available -= words;
-		fifo->entry[i].address += words * 4;
-		fifo->entry[i].size -= words;
-
-		/*
-		 * Write the HW fifo data. The read every three writes is due
-		 * to an errata on CN3XXX chips
-		 */
-		while (words > 3) {
-			cvmx_write64_uint32(csr_address, *ptr++);
-			cvmx_write64_uint32(csr_address, *ptr++);
-			cvmx_write64_uint32(csr_address, *ptr++);
-			cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index));
-			words -= 3;
-		}
-		cvmx_write64_uint32(csr_address, *ptr++);
-		if (--words) {
-			cvmx_write64_uint32(csr_address, *ptr++);
-			if (--words)
-				cvmx_write64_uint32(csr_address, *ptr++);
-		}
-		cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index));
-	}
-	return fifo->head != fifo->tail;
-}
-
-/**
- * Check the hardware FIFOs and fill them as needed
- *
- * @usb:	USB device state populated by cvmx_usb_initialize().
- */
-static void cvmx_usb_poll_tx_fifo(struct octeon_hcd *usb)
-{
-	if (usb->periodic.head != usb->periodic.tail) {
-		union cvmx_usbcx_hptxsts tx_status;
-
-		tx_status.u32 = cvmx_usb_read_csr32(usb,
-						    CVMX_USBCX_HPTXSTS(usb->index));
-		if (cvmx_usb_fill_tx_hw(usb, &usb->periodic,
-					tx_status.s.ptxfspcavail))
-			USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index),
-					cvmx_usbcx_gintmsk, ptxfempmsk, 1);
-		else
-			USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index),
-					cvmx_usbcx_gintmsk, ptxfempmsk, 0);
-	}
-
-	if (usb->nonperiodic.head != usb->nonperiodic.tail) {
-		union cvmx_usbcx_gnptxsts tx_status;
-
-		tx_status.u32 = cvmx_usb_read_csr32(usb,
-						    CVMX_USBCX_GNPTXSTS(usb->index));
-		if (cvmx_usb_fill_tx_hw(usb, &usb->nonperiodic,
-					tx_status.s.nptxfspcavail))
-			USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index),
-					cvmx_usbcx_gintmsk, nptxfempmsk, 1);
-		else
-			USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index),
-					cvmx_usbcx_gintmsk, nptxfempmsk, 0);
-	}
-}
-
-/**
- * Fill the TX FIFO with an outgoing packet
- *
- * @usb:	  USB device state populated by cvmx_usb_initialize().
- * @channel:	  Channel number to get packet from
- */
-static void cvmx_usb_fill_tx_fifo(struct octeon_hcd *usb, int channel)
-{
-	union cvmx_usbcx_hccharx hcchar;
-	union cvmx_usbcx_hcspltx usbc_hcsplt;
-	union cvmx_usbcx_hctsizx usbc_hctsiz;
-	struct cvmx_usb_tx_fifo *fifo;
-
-	/* We only need to fill data on outbound channels */
-	hcchar.u32 = cvmx_usb_read_csr32(usb,
-					 CVMX_USBCX_HCCHARX(channel, usb->index));
-	if (hcchar.s.epdir != CVMX_USB_DIRECTION_OUT)
-		return;
-
-	/* OUT Splits only have data on the start and not the complete */
-	usbc_hcsplt.u32 = cvmx_usb_read_csr32(usb,
-					      CVMX_USBCX_HCSPLTX(channel, usb->index));
-	if (usbc_hcsplt.s.spltena && usbc_hcsplt.s.compsplt)
-		return;
-
-	/*
-	 * Find out how many bytes we need to fill and convert it into 32bit
-	 * words.
-	 */
-	usbc_hctsiz.u32 = cvmx_usb_read_csr32(usb,
-					      CVMX_USBCX_HCTSIZX(channel, usb->index));
-	if (!usbc_hctsiz.s.xfersize)
-		return;
-
-	if ((hcchar.s.eptype == CVMX_USB_TRANSFER_INTERRUPT) ||
-	    (hcchar.s.eptype == CVMX_USB_TRANSFER_ISOCHRONOUS))
-		fifo = &usb->periodic;
-	else
-		fifo = &usb->nonperiodic;
-
-	fifo->entry[fifo->head].channel = channel;
-	fifo->entry[fifo->head].address =
-		cvmx_read64_uint64(CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) +
-				   channel * 8);
-	fifo->entry[fifo->head].size = (usbc_hctsiz.s.xfersize + 3) >> 2;
-	fifo->head++;
-	if (fifo->head > MAX_CHANNELS)
-		fifo->head = 0;
-
-	cvmx_usb_poll_tx_fifo(usb);
-}
-
-/**
- * Perform channel specific setup for Control transactions. All
- * the generic stuff will already have been done in cvmx_usb_start_channel().
- *
- * @usb:	  USB device state populated by cvmx_usb_initialize().
- * @channel:	  Channel to setup
- * @pipe:	  Pipe for control transaction
- */
-static void cvmx_usb_start_channel_control(struct octeon_hcd *usb,
-					   int channel,
-					   struct cvmx_usb_pipe *pipe)
-{
-	struct usb_hcd *hcd = octeon_to_hcd(usb);
-	struct device *dev = hcd->self.controller;
-	struct cvmx_usb_transaction *transaction =
-		list_first_entry(&pipe->transactions, typeof(*transaction),
-				 node);
-	struct usb_ctrlrequest *header =
-		cvmx_phys_to_ptr(transaction->control_header);
-	int bytes_to_transfer = transaction->buffer_length -
-		transaction->actual_bytes;
-	int packets_to_transfer;
-	union cvmx_usbcx_hctsizx usbc_hctsiz;
-
-	usbc_hctsiz.u32 = cvmx_usb_read_csr32(usb,
-					      CVMX_USBCX_HCTSIZX(channel, usb->index));
-
-	switch (transaction->stage) {
-	case CVMX_USB_STAGE_NON_CONTROL:
-	case CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE:
-		dev_err(dev, "%s: ERROR - Non control stage\n", __func__);
-		break;
-	case CVMX_USB_STAGE_SETUP:
-		usbc_hctsiz.s.pid = 3; /* Setup */
-		bytes_to_transfer = sizeof(*header);
-		/* All Control operations start with a setup going OUT */
-		USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index),
-				cvmx_usbcx_hccharx, epdir,
-				CVMX_USB_DIRECTION_OUT);
-		/*
-		 * Setup send the control header instead of the buffer data. The
-		 * buffer data will be used in the next stage
-		 */
-		cvmx_write64_uint64(CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) +
-					channel * 8,
-				    transaction->control_header);
-		break;
-	case CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE:
-		usbc_hctsiz.s.pid = 3; /* Setup */
-		bytes_to_transfer = 0;
-		/* All Control operations start with a setup going OUT */
-		USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index),
-				cvmx_usbcx_hccharx, epdir,
-				CVMX_USB_DIRECTION_OUT);
-
-		USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index),
-				cvmx_usbcx_hcspltx, compsplt, 1);
-		break;
-	case CVMX_USB_STAGE_DATA:
-		usbc_hctsiz.s.pid = cvmx_usb_get_data_pid(pipe);
-		if (cvmx_usb_pipe_needs_split(usb, pipe)) {
-			if (header->bRequestType & USB_DIR_IN)
-				bytes_to_transfer = 0;
-			else if (bytes_to_transfer > pipe->max_packet)
-				bytes_to_transfer = pipe->max_packet;
-		}
-		USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index),
-				cvmx_usbcx_hccharx, epdir,
-				((header->bRequestType & USB_DIR_IN) ?
-					CVMX_USB_DIRECTION_IN :
-					CVMX_USB_DIRECTION_OUT));
-		break;
-	case CVMX_USB_STAGE_DATA_SPLIT_COMPLETE:
-		usbc_hctsiz.s.pid = cvmx_usb_get_data_pid(pipe);
-		if (!(header->bRequestType & USB_DIR_IN))
-			bytes_to_transfer = 0;
-		USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index),
-				cvmx_usbcx_hccharx, epdir,
-				((header->bRequestType & USB_DIR_IN) ?
-					CVMX_USB_DIRECTION_IN :
-					CVMX_USB_DIRECTION_OUT));
-		USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index),
-				cvmx_usbcx_hcspltx, compsplt, 1);
-		break;
-	case CVMX_USB_STAGE_STATUS:
-		usbc_hctsiz.s.pid = cvmx_usb_get_data_pid(pipe);
-		bytes_to_transfer = 0;
-		USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index),
-				cvmx_usbcx_hccharx, epdir,
-				((header->bRequestType & USB_DIR_IN) ?
-					CVMX_USB_DIRECTION_OUT :
-					CVMX_USB_DIRECTION_IN));
-		break;
-	case CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE:
-		usbc_hctsiz.s.pid = cvmx_usb_get_data_pid(pipe);
-		bytes_to_transfer = 0;
-		USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index),
-				cvmx_usbcx_hccharx, epdir,
-				((header->bRequestType & USB_DIR_IN) ?
-					CVMX_USB_DIRECTION_OUT :
-					CVMX_USB_DIRECTION_IN));
-		USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index),
-				cvmx_usbcx_hcspltx, compsplt, 1);
-		break;
-	}
-
-	/*
-	 * Make sure the transfer never exceeds the byte limit of the hardware.
-	 * Further bytes will be sent as continued transactions
-	 */
-	if (bytes_to_transfer > MAX_TRANSFER_BYTES) {
-		/* Round MAX_TRANSFER_BYTES to a multiple of out packet size */
-		bytes_to_transfer = MAX_TRANSFER_BYTES / pipe->max_packet;
-		bytes_to_transfer *= pipe->max_packet;
-	}
-
-	/*
-	 * Calculate the number of packets to transfer. If the length is zero
-	 * we still need to transfer one packet
-	 */
-	packets_to_transfer = DIV_ROUND_UP(bytes_to_transfer,
-					   pipe->max_packet);
-	if (packets_to_transfer == 0) {
-		packets_to_transfer = 1;
-	} else if ((packets_to_transfer > 1) &&
-			(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)) {
-		/*
-		 * Limit to one packet when not using DMA. Channels must be
-		 * restarted between every packet for IN transactions, so there
-		 * is no reason to do multiple packets in a row
-		 */
-		packets_to_transfer = 1;
-		bytes_to_transfer = packets_to_transfer * pipe->max_packet;
-	} else if (packets_to_transfer > MAX_TRANSFER_PACKETS) {
-		/*
-		 * Limit the number of packet and data transferred to what the
-		 * hardware can handle
-		 */
-		packets_to_transfer = MAX_TRANSFER_PACKETS;
-		bytes_to_transfer = packets_to_transfer * pipe->max_packet;
-	}
-
-	usbc_hctsiz.s.xfersize = bytes_to_transfer;
-	usbc_hctsiz.s.pktcnt = packets_to_transfer;
-
-	cvmx_usb_write_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index),
-			     usbc_hctsiz.u32);
-}
-
-/**
- * Start a channel to perform the pipe's head transaction
- *
- * @usb:	  USB device state populated by cvmx_usb_initialize().
- * @channel:	  Channel to setup
- * @pipe:	  Pipe to start
- */
-static void cvmx_usb_start_channel(struct octeon_hcd *usb, int channel,
-				   struct cvmx_usb_pipe *pipe)
-{
-	struct cvmx_usb_transaction *transaction =
-		list_first_entry(&pipe->transactions, typeof(*transaction),
-				 node);
-
-	/* Make sure all writes to the DMA region get flushed */
-	CVMX_SYNCW;
-
-	/* Attach the channel to the pipe */
-	usb->pipe_for_channel[channel] = pipe;
-	pipe->channel = channel;
-	pipe->flags |= CVMX_USB_PIPE_FLAGS_SCHEDULED;
-
-	/* Mark this channel as in use */
-	usb->idle_hardware_channels &= ~(1 << channel);
-
-	/* Enable the channel interrupt bits */
-	{
-		union cvmx_usbcx_hcintx usbc_hcint;
-		union cvmx_usbcx_hcintmskx usbc_hcintmsk;
-		union cvmx_usbcx_haintmsk usbc_haintmsk;
-
-		/* Clear all channel status bits */
-		usbc_hcint.u32 = cvmx_usb_read_csr32(usb,
-						     CVMX_USBCX_HCINTX(channel, usb->index));
-
-		cvmx_usb_write_csr32(usb,
-				     CVMX_USBCX_HCINTX(channel, usb->index),
-				     usbc_hcint.u32);
-
-		usbc_hcintmsk.u32 = 0;
-		usbc_hcintmsk.s.chhltdmsk = 1;
-		if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) {
-			/*
-			 * Channels need these extra interrupts when we aren't
-			 * in DMA mode.
-			 */
-			usbc_hcintmsk.s.datatglerrmsk = 1;
-			usbc_hcintmsk.s.frmovrunmsk = 1;
-			usbc_hcintmsk.s.bblerrmsk = 1;
-			usbc_hcintmsk.s.xacterrmsk = 1;
-			if (cvmx_usb_pipe_needs_split(usb, pipe)) {
-				/*
-				 * Splits don't generate xfercompl, so we need
-				 * ACK and NYET.
-				 */
-				usbc_hcintmsk.s.nyetmsk = 1;
-				usbc_hcintmsk.s.ackmsk = 1;
-			}
-			usbc_hcintmsk.s.nakmsk = 1;
-			usbc_hcintmsk.s.stallmsk = 1;
-			usbc_hcintmsk.s.xfercomplmsk = 1;
-		}
-		cvmx_usb_write_csr32(usb,
-				     CVMX_USBCX_HCINTMSKX(channel, usb->index),
-				     usbc_hcintmsk.u32);
-
-		/* Enable the channel interrupt to propagate */
-		usbc_haintmsk.u32 = cvmx_usb_read_csr32(usb,
-							CVMX_USBCX_HAINTMSK(usb->index));
-		usbc_haintmsk.s.haintmsk |= 1 << channel;
-		cvmx_usb_write_csr32(usb, CVMX_USBCX_HAINTMSK(usb->index),
-				     usbc_haintmsk.u32);
-	}
-
-	/* Setup the location the DMA engine uses. */
-	{
-		u64 reg;
-		u64 dma_address = transaction->buffer +
-				  transaction->actual_bytes;
-
-		if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)
-			dma_address = transaction->buffer +
-					transaction->iso_packets[0].offset +
-					transaction->actual_bytes;
-
-		if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT)
-			reg = CVMX_USBNX_DMA0_OUTB_CHN0(usb->index);
-		else
-			reg = CVMX_USBNX_DMA0_INB_CHN0(usb->index);
-		cvmx_write64_uint64(reg + channel * 8, dma_address);
-	}
-
-	/* Setup both the size of the transfer and the SPLIT characteristics */
-	{
-		union cvmx_usbcx_hcspltx usbc_hcsplt = {.u32 = 0};
-		union cvmx_usbcx_hctsizx usbc_hctsiz = {.u32 = 0};
-		int packets_to_transfer;
-		int bytes_to_transfer = transaction->buffer_length -
-			transaction->actual_bytes;
-
-		/*
-		 * ISOCHRONOUS transactions store each individual transfer size
-		 * in the packet structure, not the global buffer_length
-		 */
-		if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)
-			bytes_to_transfer =
-				transaction->iso_packets[0].length -
-				transaction->actual_bytes;
-
-		/*
-		 * We need to do split transactions when we are talking to non
-		 * high speed devices that are behind a high speed hub
-		 */
-		if (cvmx_usb_pipe_needs_split(usb, pipe)) {
-			/*
-			 * On the start split phase (stage is even) record the
-			 * frame number we will need to send the split complete.
-			 * We only store the lower two bits since the time ahead
-			 * can only be two frames
-			 */
-			if ((transaction->stage & 1) == 0) {
-				if (transaction->type == CVMX_USB_TRANSFER_BULK)
-					pipe->split_sc_frame =
-						(usb->frame_number + 1) & 0x7f;
-				else
-					pipe->split_sc_frame =
-						(usb->frame_number + 2) & 0x7f;
-			} else {
-				pipe->split_sc_frame = -1;
-			}
-
-			usbc_hcsplt.s.spltena = 1;
-			usbc_hcsplt.s.hubaddr = pipe->hub_device_addr;
-			usbc_hcsplt.s.prtaddr = pipe->hub_port;
-			usbc_hcsplt.s.compsplt = (transaction->stage ==
-				CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE);
-
-			/*
-			 * SPLIT transactions can only ever transmit one data
-			 * packet so limit the transfer size to the max packet
-			 * size
-			 */
-			if (bytes_to_transfer > pipe->max_packet)
-				bytes_to_transfer = pipe->max_packet;
-
-			/*
-			 * ISOCHRONOUS OUT splits are unique in that they limit
-			 * data transfers to 188 byte chunks representing the
-			 * begin/middle/end of the data or all
-			 */
-			if (!usbc_hcsplt.s.compsplt &&
-			    (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) &&
-			    (pipe->transfer_type ==
-			     CVMX_USB_TRANSFER_ISOCHRONOUS)) {
-				/*
-				 * Clear the split complete frame number as
-				 * there isn't going to be a split complete
-				 */
-				pipe->split_sc_frame = -1;
-				/*
-				 * See if we've started this transfer and sent
-				 * data
-				 */
-				if (transaction->actual_bytes == 0) {
-					/*
-					 * Nothing sent yet, this is either a
-					 * begin or the entire payload
-					 */
-					if (bytes_to_transfer <= 188)
-						/* Entire payload in one go */
-						usbc_hcsplt.s.xactpos = 3;
-					else
-						/* First part of payload */
-						usbc_hcsplt.s.xactpos = 2;
-				} else {
-					/*
-					 * Continuing the previous data, we must
-					 * either be in the middle or at the end
-					 */
-					if (bytes_to_transfer <= 188)
-						/* End of payload */
-						usbc_hcsplt.s.xactpos = 1;
-					else
-						/* Middle of payload */
-						usbc_hcsplt.s.xactpos = 0;
-				}
-				/*
-				 * Again, the transfer size is limited to 188
-				 * bytes
-				 */
-				if (bytes_to_transfer > 188)
-					bytes_to_transfer = 188;
-			}
-		}
-
-		/*
-		 * Make sure the transfer never exceeds the byte limit of the
-		 * hardware. Further bytes will be sent as continued
-		 * transactions
-		 */
-		if (bytes_to_transfer > MAX_TRANSFER_BYTES) {
-			/*
-			 * Round MAX_TRANSFER_BYTES to a multiple of out packet
-			 * size
-			 */
-			bytes_to_transfer = MAX_TRANSFER_BYTES /
-				pipe->max_packet;
-			bytes_to_transfer *= pipe->max_packet;
-		}
-
-		/*
-		 * Calculate the number of packets to transfer. If the length is
-		 * zero we still need to transfer one packet
-		 */
-		packets_to_transfer =
-			DIV_ROUND_UP(bytes_to_transfer, pipe->max_packet);
-		if (packets_to_transfer == 0) {
-			packets_to_transfer = 1;
-		} else if ((packets_to_transfer > 1) &&
-			   (usb->init_flags &
-			    CVMX_USB_INITIALIZE_FLAGS_NO_DMA)) {
-			/*
-			 * Limit to one packet when not using DMA. Channels must
-			 * be restarted between every packet for IN
-			 * transactions, so there is no reason to do multiple
-			 * packets in a row
-			 */
-			packets_to_transfer = 1;
-			bytes_to_transfer = packets_to_transfer *
-				pipe->max_packet;
-		} else if (packets_to_transfer > MAX_TRANSFER_PACKETS) {
-			/*
-			 * Limit the number of packet and data transferred to
-			 * what the hardware can handle
-			 */
-			packets_to_transfer = MAX_TRANSFER_PACKETS;
-			bytes_to_transfer = packets_to_transfer *
-				pipe->max_packet;
-		}
-
-		usbc_hctsiz.s.xfersize = bytes_to_transfer;
-		usbc_hctsiz.s.pktcnt = packets_to_transfer;
-
-		/* Update the DATA0/DATA1 toggle */
-		usbc_hctsiz.s.pid = cvmx_usb_get_data_pid(pipe);
-		/*
-		 * High speed pipes may need a hardware ping before they start
-		 */
-		if (pipe->flags & CVMX_USB_PIPE_FLAGS_NEED_PING)
-			usbc_hctsiz.s.dopng = 1;
-
-		cvmx_usb_write_csr32(usb,
-				     CVMX_USBCX_HCSPLTX(channel, usb->index),
-				     usbc_hcsplt.u32);
-		cvmx_usb_write_csr32(usb,
-				     CVMX_USBCX_HCTSIZX(channel, usb->index),
-				     usbc_hctsiz.u32);
-	}
-
-	/* Setup the Host Channel Characteristics Register */
-	{
-		union cvmx_usbcx_hccharx usbc_hcchar = {.u32 = 0};
-
-		/*
-		 * Set the startframe odd/even properly. This is only used for
-		 * periodic
-		 */
-		usbc_hcchar.s.oddfrm = usb->frame_number & 1;
-
-		/*
-		 * Set the number of back to back packets allowed by this
-		 * endpoint. Split transactions interpret "ec" as the number of
-		 * immediate retries of failure. These retries happen too
-		 * quickly, so we disable these entirely for splits
-		 */
-		if (cvmx_usb_pipe_needs_split(usb, pipe))
-			usbc_hcchar.s.ec = 1;
-		else if (pipe->multi_count < 1)
-			usbc_hcchar.s.ec = 1;
-		else if (pipe->multi_count > 3)
-			usbc_hcchar.s.ec = 3;
-		else
-			usbc_hcchar.s.ec = pipe->multi_count;
-
-		/* Set the rest of the endpoint specific settings */
-		usbc_hcchar.s.devaddr = pipe->device_addr;
-		usbc_hcchar.s.eptype = transaction->type;
-		usbc_hcchar.s.lspddev =
-			(pipe->device_speed == CVMX_USB_SPEED_LOW);
-		usbc_hcchar.s.epdir = pipe->transfer_dir;
-		usbc_hcchar.s.epnum = pipe->endpoint_num;
-		usbc_hcchar.s.mps = pipe->max_packet;
-		cvmx_usb_write_csr32(usb,
-				     CVMX_USBCX_HCCHARX(channel, usb->index),
-				     usbc_hcchar.u32);
-	}
-
-	/* Do transaction type specific fixups as needed */
-	switch (transaction->type) {
-	case CVMX_USB_TRANSFER_CONTROL:
-		cvmx_usb_start_channel_control(usb, channel, pipe);
-		break;
-	case CVMX_USB_TRANSFER_BULK:
-	case CVMX_USB_TRANSFER_INTERRUPT:
-		break;
-	case CVMX_USB_TRANSFER_ISOCHRONOUS:
-		if (!cvmx_usb_pipe_needs_split(usb, pipe)) {
-			/*
-			 * ISO transactions require different PIDs depending on
-			 * direction and how many packets are needed
-			 */
-			if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) {
-				if (pipe->multi_count < 2) /* Need DATA0 */
-					USB_SET_FIELD32(
-						CVMX_USBCX_HCTSIZX(channel,
-								   usb->index),
-						cvmx_usbcx_hctsizx, pid, 0);
-				else /* Need MDATA */
-					USB_SET_FIELD32(
-						CVMX_USBCX_HCTSIZX(channel,
-								   usb->index),
-						cvmx_usbcx_hctsizx, pid, 3);
-			}
-		}
-		break;
-	}
-	{
-		union cvmx_usbcx_hctsizx usbc_hctsiz = { .u32 =
-			cvmx_usb_read_csr32(usb,
-					    CVMX_USBCX_HCTSIZX(channel,
-							       usb->index))
-		};
-		transaction->xfersize = usbc_hctsiz.s.xfersize;
-		transaction->pktcnt = usbc_hctsiz.s.pktcnt;
-	}
-	/* Remember when we start a split transaction */
-	if (cvmx_usb_pipe_needs_split(usb, pipe))
-		usb->active_split = transaction;
-	USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index),
-			cvmx_usbcx_hccharx, chena, 1);
-	if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
-		cvmx_usb_fill_tx_fifo(usb, channel);
-}
-
-/**
- * Find a pipe that is ready to be scheduled to hardware.
- * @usb:	 USB device state populated by cvmx_usb_initialize().
- * @xfer_type:	 Transfer type
- *
- * Returns: Pipe or NULL if none are ready
- */
-static struct cvmx_usb_pipe *cvmx_usb_find_ready_pipe(struct octeon_hcd *usb,
-						      enum cvmx_usb_transfer xfer_type)
-{
-	struct list_head *list = usb->active_pipes + xfer_type;
-	u64 current_frame = usb->frame_number;
-	struct cvmx_usb_pipe *pipe;
-
-	list_for_each_entry(pipe, list, node) {
-		struct cvmx_usb_transaction *t =
-			list_first_entry(&pipe->transactions, typeof(*t),
-					 node);
-		if (!(pipe->flags & CVMX_USB_PIPE_FLAGS_SCHEDULED) && t &&
-		    (pipe->next_tx_frame <= current_frame) &&
-		    ((pipe->split_sc_frame == -1) ||
-		     ((((int)current_frame - pipe->split_sc_frame) & 0x7f) <
-		      0x40)) &&
-		    (!usb->active_split || (usb->active_split == t))) {
-			prefetch(t);
-			return pipe;
-		}
-	}
-	return NULL;
-}
-
-static struct cvmx_usb_pipe *cvmx_usb_next_pipe(struct octeon_hcd *usb,
-						int is_sof)
-{
-	struct cvmx_usb_pipe *pipe;
-
-	/* Find a pipe needing service. */
-	if (is_sof) {
-		/*
-		 * Only process periodic pipes on SOF interrupts. This way we
-		 * are sure that the periodic data is sent in the beginning of
-		 * the frame.
-		 */
-		pipe = cvmx_usb_find_ready_pipe(usb,
-						CVMX_USB_TRANSFER_ISOCHRONOUS);
-		if (pipe)
-			return pipe;
-		pipe = cvmx_usb_find_ready_pipe(usb,
-						CVMX_USB_TRANSFER_INTERRUPT);
-		if (pipe)
-			return pipe;
-	}
-	pipe = cvmx_usb_find_ready_pipe(usb, CVMX_USB_TRANSFER_CONTROL);
-	if (pipe)
-		return pipe;
-	return cvmx_usb_find_ready_pipe(usb, CVMX_USB_TRANSFER_BULK);
-}
-
-/**
- * Called whenever a pipe might need to be scheduled to the
- * hardware.
- *
- * @usb:	 USB device state populated by cvmx_usb_initialize().
- * @is_sof:	 True if this schedule was called on a SOF interrupt.
- */
-static void cvmx_usb_schedule(struct octeon_hcd *usb, int is_sof)
-{
-	int channel;
-	struct cvmx_usb_pipe *pipe;
-	int need_sof;
-	enum cvmx_usb_transfer ttype;
-
-	if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) {
-		/*
-		 * Without DMA we need to be careful to not schedule something
-		 * at the end of a frame and cause an overrun.
-		 */
-		union cvmx_usbcx_hfnum hfnum = {
-			.u32 = cvmx_usb_read_csr32(usb,
-						CVMX_USBCX_HFNUM(usb->index))
-		};
-
-		union cvmx_usbcx_hfir hfir = {
-			.u32 = cvmx_usb_read_csr32(usb,
-						CVMX_USBCX_HFIR(usb->index))
-		};
-
-		if (hfnum.s.frrem < hfir.s.frint / 4)
-			goto done;
-	}
-
-	while (usb->idle_hardware_channels) {
-		/* Find an idle channel */
-		channel = __fls(usb->idle_hardware_channels);
-		if (unlikely(channel > 7))
-			break;
-
-		pipe = cvmx_usb_next_pipe(usb, is_sof);
-		if (!pipe)
-			break;
-
-		cvmx_usb_start_channel(usb, channel, pipe);
-	}
-
-done:
-	/*
-	 * Only enable SOF interrupts when we have transactions pending in the
-	 * future that might need to be scheduled
-	 */
-	need_sof = 0;
-	for (ttype = CVMX_USB_TRANSFER_CONTROL;
-	     ttype <= CVMX_USB_TRANSFER_INTERRUPT; ttype++) {
-		list_for_each_entry(pipe, &usb->active_pipes[ttype], node) {
-			if (pipe->next_tx_frame > usb->frame_number) {
-				need_sof = 1;
-				break;
-			}
-		}
-	}
-	USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index),
-			cvmx_usbcx_gintmsk, sofmsk, need_sof);
-}
-
-static void octeon_usb_urb_complete_callback(struct octeon_hcd *usb,
-					     enum cvmx_usb_status status,
-					     struct cvmx_usb_pipe *pipe,
-					     struct cvmx_usb_transaction
-						*transaction,
-					     int bytes_transferred,
-					     struct urb *urb)
-{
-	struct usb_hcd *hcd = octeon_to_hcd(usb);
-	struct device *dev = hcd->self.controller;
-
-	if (likely(status == CVMX_USB_STATUS_OK))
-		urb->actual_length = bytes_transferred;
-	else
-		urb->actual_length = 0;
-
-	urb->hcpriv = NULL;
-
-	/* For Isochronous transactions we need to update the URB packet status
-	 * list from data in our private copy
-	 */
-	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-		int i;
-		/*
-		 * The pointer to the private list is stored in the setup_packet
-		 * field.
-		 */
-		struct cvmx_usb_iso_packet *iso_packet =
-			(struct cvmx_usb_iso_packet *)urb->setup_packet;
-		/* Recalculate the transfer size by adding up each packet */
-		urb->actual_length = 0;
-		for (i = 0; i < urb->number_of_packets; i++) {
-			if (iso_packet[i].status == CVMX_USB_STATUS_OK) {
-				urb->iso_frame_desc[i].status = 0;
-				urb->iso_frame_desc[i].actual_length =
-					iso_packet[i].length;
-				urb->actual_length +=
-					urb->iso_frame_desc[i].actual_length;
-			} else {
-				dev_dbg(dev, "ISOCHRONOUS packet=%d of %d status=%d pipe=%p transaction=%p size=%d\n",
-					i, urb->number_of_packets,
-					iso_packet[i].status, pipe,
-					transaction, iso_packet[i].length);
-				urb->iso_frame_desc[i].status = -EREMOTEIO;
-			}
-		}
-		/* Free the private list now that we don't need it anymore */
-		kfree(iso_packet);
-		urb->setup_packet = NULL;
-	}
-
-	switch (status) {
-	case CVMX_USB_STATUS_OK:
-		urb->status = 0;
-		break;
-	case CVMX_USB_STATUS_CANCEL:
-		if (urb->status == 0)
-			urb->status = -ENOENT;
-		break;
-	case CVMX_USB_STATUS_STALL:
-		dev_dbg(dev, "status=stall pipe=%p transaction=%p size=%d\n",
-			pipe, transaction, bytes_transferred);
-		urb->status = -EPIPE;
-		break;
-	case CVMX_USB_STATUS_BABBLEERR:
-		dev_dbg(dev, "status=babble pipe=%p transaction=%p size=%d\n",
-			pipe, transaction, bytes_transferred);
-		urb->status = -EPIPE;
-		break;
-	case CVMX_USB_STATUS_SHORT:
-		dev_dbg(dev, "status=short pipe=%p transaction=%p size=%d\n",
-			pipe, transaction, bytes_transferred);
-		urb->status = -EREMOTEIO;
-		break;
-	case CVMX_USB_STATUS_ERROR:
-	case CVMX_USB_STATUS_XACTERR:
-	case CVMX_USB_STATUS_DATATGLERR:
-	case CVMX_USB_STATUS_FRAMEERR:
-		dev_dbg(dev, "status=%d pipe=%p transaction=%p size=%d\n",
-			status, pipe, transaction, bytes_transferred);
-		urb->status = -EPROTO;
-		break;
-	}
-	usb_hcd_unlink_urb_from_ep(octeon_to_hcd(usb), urb);
-	spin_unlock(&usb->lock);
-	usb_hcd_giveback_urb(octeon_to_hcd(usb), urb, urb->status);
-	spin_lock(&usb->lock);
-}
-
-/**
- * Signal the completion of a transaction and free it. The
- * transaction will be removed from the pipe transaction list.
- *
- * @usb:	 USB device state populated by cvmx_usb_initialize().
- * @pipe:	 Pipe the transaction is on
- * @transaction:
- *		 Transaction that completed
- * @complete_code:
- *		 Completion code
- */
-static void cvmx_usb_complete(struct octeon_hcd *usb,
-			      struct cvmx_usb_pipe *pipe,
-			      struct cvmx_usb_transaction *transaction,
-			      enum cvmx_usb_status complete_code)
-{
-	/* If this was a split then clear our split in progress marker */
-	if (usb->active_split == transaction)
-		usb->active_split = NULL;
-
-	/*
-	 * Isochronous transactions need extra processing as they might not be
-	 * done after a single data transfer
-	 */
-	if (unlikely(transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)) {
-		/* Update the number of bytes transferred in this ISO packet */
-		transaction->iso_packets[0].length = transaction->actual_bytes;
-		transaction->iso_packets[0].status = complete_code;
-
-		/*
-		 * If there are more ISOs pending and we succeeded, schedule the
-		 * next one
-		 */
-		if ((transaction->iso_number_packets > 1) &&
-		    (complete_code == CVMX_USB_STATUS_OK)) {
-			/* No bytes transferred for this packet as of yet */
-			transaction->actual_bytes = 0;
-			/* One less ISO waiting to transfer */
-			transaction->iso_number_packets--;
-			/* Increment to the next location in our packet array */
-			transaction->iso_packets++;
-			transaction->stage = CVMX_USB_STAGE_NON_CONTROL;
-			return;
-		}
-	}
-
-	/* Remove the transaction from the pipe list */
-	list_del(&transaction->node);
-	if (list_empty(&pipe->transactions))
-		list_move_tail(&pipe->node, &usb->idle_pipes);
-	octeon_usb_urb_complete_callback(usb, complete_code, pipe,
-					 transaction,
-					 transaction->actual_bytes,
-					 transaction->urb);
-	kfree(transaction);
-}
-
-/**
- * Submit a usb transaction to a pipe. Called for all types
- * of transactions.
- *
- * @usb:
- * @pipe:	    Which pipe to submit to.
- * @type:	    Transaction type
- * @buffer:	    User buffer for the transaction
- * @buffer_length:
- *		    User buffer's length in bytes
- * @control_header:
- *		    For control transactions, the 8 byte standard header
- * @iso_start_frame:
- *		    For ISO transactions, the start frame
- * @iso_number_packets:
- *		    For ISO, the number of packet in the transaction.
- * @iso_packets:
- *		    A description of each ISO packet
- * @urb:	    URB for the callback
- *
- * Returns: Transaction or NULL on failure.
- */
-static struct cvmx_usb_transaction *cvmx_usb_submit_transaction(
-				struct octeon_hcd *usb,
-				struct cvmx_usb_pipe *pipe,
-				enum cvmx_usb_transfer type,
-				u64 buffer,
-				int buffer_length,
-				u64 control_header,
-				int iso_start_frame,
-				int iso_number_packets,
-				struct cvmx_usb_iso_packet *iso_packets,
-				struct urb *urb)
-{
-	struct cvmx_usb_transaction *transaction;
-
-	if (unlikely(pipe->transfer_type != type))
-		return NULL;
-
-	transaction = kzalloc(sizeof(*transaction), GFP_ATOMIC);
-	if (unlikely(!transaction))
-		return NULL;
-
-	transaction->type = type;
-	transaction->buffer = buffer;
-	transaction->buffer_length = buffer_length;
-	transaction->control_header = control_header;
-	/* FIXME: This is not used, implement it. */
-	transaction->iso_start_frame = iso_start_frame;
-	transaction->iso_number_packets = iso_number_packets;
-	transaction->iso_packets = iso_packets;
-	transaction->urb = urb;
-	if (transaction->type == CVMX_USB_TRANSFER_CONTROL)
-		transaction->stage = CVMX_USB_STAGE_SETUP;
-	else
-		transaction->stage = CVMX_USB_STAGE_NON_CONTROL;
-
-	if (!list_empty(&pipe->transactions)) {
-		list_add_tail(&transaction->node, &pipe->transactions);
-	} else {
-		list_add_tail(&transaction->node, &pipe->transactions);
-		list_move_tail(&pipe->node,
-			       &usb->active_pipes[pipe->transfer_type]);
-
-		/*
-		 * We may need to schedule the pipe if this was the head of the
-		 * pipe.
-		 */
-		cvmx_usb_schedule(usb, 0);
-	}
-
-	return transaction;
-}
-
-/**
- * Call to submit a USB Bulk transfer to a pipe.
- *
- * @usb:	    USB device state populated by cvmx_usb_initialize().
- * @pipe:	    Handle to the pipe for the transfer.
- * @urb:	    URB.
- *
- * Returns: A submitted transaction or NULL on failure.
- */
-static struct cvmx_usb_transaction *cvmx_usb_submit_bulk(
-						struct octeon_hcd *usb,
-						struct cvmx_usb_pipe *pipe,
-						struct urb *urb)
-{
-	return cvmx_usb_submit_transaction(usb, pipe, CVMX_USB_TRANSFER_BULK,
-					   urb->transfer_dma,
-					   urb->transfer_buffer_length,
-					   0, /* control_header */
-					   0, /* iso_start_frame */
-					   0, /* iso_number_packets */
-					   NULL, /* iso_packets */
-					   urb);
-}
-
-/**
- * Call to submit a USB Interrupt transfer to a pipe.
- *
- * @usb:	    USB device state populated by cvmx_usb_initialize().
- * @pipe:	    Handle to the pipe for the transfer.
- * @urb:	    URB returned when the callback is called.
- *
- * Returns: A submitted transaction or NULL on failure.
- */
-static struct cvmx_usb_transaction *cvmx_usb_submit_interrupt(
-						struct octeon_hcd *usb,
-						struct cvmx_usb_pipe *pipe,
-						struct urb *urb)
-{
-	return cvmx_usb_submit_transaction(usb, pipe,
-					   CVMX_USB_TRANSFER_INTERRUPT,
-					   urb->transfer_dma,
-					   urb->transfer_buffer_length,
-					   0, /* control_header */
-					   0, /* iso_start_frame */
-					   0, /* iso_number_packets */
-					   NULL, /* iso_packets */
-					   urb);
-}
-
-/**
- * Call to submit a USB Control transfer to a pipe.
- *
- * @usb:	    USB device state populated by cvmx_usb_initialize().
- * @pipe:	    Handle to the pipe for the transfer.
- * @urb:	    URB.
- *
- * Returns: A submitted transaction or NULL on failure.
- */
-static struct cvmx_usb_transaction *cvmx_usb_submit_control(
-						struct octeon_hcd *usb,
-						struct cvmx_usb_pipe *pipe,
-						struct urb *urb)
-{
-	int buffer_length = urb->transfer_buffer_length;
-	u64 control_header = urb->setup_dma;
-	struct usb_ctrlrequest *header = cvmx_phys_to_ptr(control_header);
-
-	if ((header->bRequestType & USB_DIR_IN) == 0)
-		buffer_length = le16_to_cpu(header->wLength);
-
-	return cvmx_usb_submit_transaction(usb, pipe,
-					   CVMX_USB_TRANSFER_CONTROL,
-					   urb->transfer_dma, buffer_length,
-					   control_header,
-					   0, /* iso_start_frame */
-					   0, /* iso_number_packets */
-					   NULL, /* iso_packets */
-					   urb);
-}
-
-/**
- * Call to submit a USB Isochronous transfer to a pipe.
- *
- * @usb:	    USB device state populated by cvmx_usb_initialize().
- * @pipe:	    Handle to the pipe for the transfer.
- * @urb:	    URB returned when the callback is called.
- *
- * Returns: A submitted transaction or NULL on failure.
- */
-static struct cvmx_usb_transaction *cvmx_usb_submit_isochronous(
-						struct octeon_hcd *usb,
-						struct cvmx_usb_pipe *pipe,
-						struct urb *urb)
-{
-	struct cvmx_usb_iso_packet *packets;
-
-	packets = (struct cvmx_usb_iso_packet *)urb->setup_packet;
-	return cvmx_usb_submit_transaction(usb, pipe,
-					   CVMX_USB_TRANSFER_ISOCHRONOUS,
-					   urb->transfer_dma,
-					   urb->transfer_buffer_length,
-					   0, /* control_header */
-					   urb->start_frame,
-					   urb->number_of_packets,
-					   packets, urb);
-}
-
-/**
- * Cancel one outstanding request in a pipe. Canceling a request
- * can fail if the transaction has already completed before cancel
- * is called. Even after a successful cancel call, it may take
- * a frame or two for the cvmx_usb_poll() function to call the
- * associated callback.
- *
- * @usb:	 USB device state populated by cvmx_usb_initialize().
- * @pipe:	 Pipe to cancel requests in.
- * @transaction: Transaction to cancel, returned by the submit function.
- *
- * Returns: 0 or a negative error code.
- */
-static int cvmx_usb_cancel(struct octeon_hcd *usb,
-			   struct cvmx_usb_pipe *pipe,
-			   struct cvmx_usb_transaction *transaction)
-{
-	/*
-	 * If the transaction is the HEAD of the queue and scheduled. We need to
-	 * treat it special
-	 */
-	if (list_first_entry(&pipe->transactions, typeof(*transaction), node) ==
-	    transaction && (pipe->flags & CVMX_USB_PIPE_FLAGS_SCHEDULED)) {
-		union cvmx_usbcx_hccharx usbc_hcchar;
-
-		usb->pipe_for_channel[pipe->channel] = NULL;
-		pipe->flags &= ~CVMX_USB_PIPE_FLAGS_SCHEDULED;
-
-		CVMX_SYNCW;
-
-		usbc_hcchar.u32 = cvmx_usb_read_csr32(usb,
-						      CVMX_USBCX_HCCHARX(pipe->channel,
-									 usb->index));
-		/*
-		 * If the channel isn't enabled then the transaction already
-		 * completed.
-		 */
-		if (usbc_hcchar.s.chena) {
-			usbc_hcchar.s.chdis = 1;
-			cvmx_usb_write_csr32(usb,
-					     CVMX_USBCX_HCCHARX(pipe->channel,
-								usb->index),
-					     usbc_hcchar.u32);
-		}
-	}
-	cvmx_usb_complete(usb, pipe, transaction, CVMX_USB_STATUS_CANCEL);
-	return 0;
-}
-
-/**
- * Cancel all outstanding requests in a pipe. Logically all this
- * does is call cvmx_usb_cancel() in a loop.
- *
- * @usb:	 USB device state populated by cvmx_usb_initialize().
- * @pipe:	 Pipe to cancel requests in.
- *
- * Returns: 0 or a negative error code.
- */
-static int cvmx_usb_cancel_all(struct octeon_hcd *usb,
-			       struct cvmx_usb_pipe *pipe)
-{
-	struct cvmx_usb_transaction *transaction, *next;
-
-	/* Simply loop through and attempt to cancel each transaction */
-	list_for_each_entry_safe(transaction, next, &pipe->transactions, node) {
-		int result = cvmx_usb_cancel(usb, pipe, transaction);
-
-		if (unlikely(result != 0))
-			return result;
-	}
-	return 0;
-}
-
-/**
- * Close a pipe created with cvmx_usb_open_pipe().
- *
- * @usb:	 USB device state populated by cvmx_usb_initialize().
- * @pipe:	 Pipe to close.
- *
- * Returns: 0 or a negative error code. EBUSY is returned if the pipe has
- *	    outstanding transfers.
- */
-static int cvmx_usb_close_pipe(struct octeon_hcd *usb,
-			       struct cvmx_usb_pipe *pipe)
-{
-	/* Fail if the pipe has pending transactions */
-	if (!list_empty(&pipe->transactions))
-		return -EBUSY;
-
-	list_del(&pipe->node);
-	kfree(pipe);
-
-	return 0;
-}
-
-/**
- * Get the current USB protocol level frame number. The frame
- * number is always in the range of 0-0x7ff.
- *
- * @usb: USB device state populated by cvmx_usb_initialize().
- *
- * Returns: USB frame number
- */
-static int cvmx_usb_get_frame_number(struct octeon_hcd *usb)
-{
-	union cvmx_usbcx_hfnum usbc_hfnum;
-
-	usbc_hfnum.u32 = cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index));
-
-	return usbc_hfnum.s.frnum;
-}
-
-static void cvmx_usb_transfer_control(struct octeon_hcd *usb,
-				      struct cvmx_usb_pipe *pipe,
-				      struct cvmx_usb_transaction *transaction,
-				      union cvmx_usbcx_hccharx usbc_hcchar,
-				      int buffer_space_left,
-				      int bytes_in_last_packet)
-{
-	switch (transaction->stage) {
-	case CVMX_USB_STAGE_NON_CONTROL:
-	case CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE:
-		/* This should be impossible */
-		cvmx_usb_complete(usb, pipe, transaction,
-				  CVMX_USB_STATUS_ERROR);
-		break;
-	case CVMX_USB_STAGE_SETUP:
-		pipe->pid_toggle = 1;
-		if (cvmx_usb_pipe_needs_split(usb, pipe)) {
-			transaction->stage =
-				CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE;
-		} else {
-			struct usb_ctrlrequest *header =
-				cvmx_phys_to_ptr(transaction->control_header);
-			if (header->wLength)
-				transaction->stage = CVMX_USB_STAGE_DATA;
-			else
-				transaction->stage = CVMX_USB_STAGE_STATUS;
-		}
-		break;
-	case CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE:
-		{
-			struct usb_ctrlrequest *header =
-				cvmx_phys_to_ptr(transaction->control_header);
-			if (header->wLength)
-				transaction->stage = CVMX_USB_STAGE_DATA;
-			else
-				transaction->stage = CVMX_USB_STAGE_STATUS;
-		}
-		break;
-	case CVMX_USB_STAGE_DATA:
-		if (cvmx_usb_pipe_needs_split(usb, pipe)) {
-			transaction->stage = CVMX_USB_STAGE_DATA_SPLIT_COMPLETE;
-			/*
-			 * For setup OUT data that are splits,
-			 * the hardware doesn't appear to count
-			 * transferred data. Here we manually
-			 * update the data transferred
-			 */
-			if (!usbc_hcchar.s.epdir) {
-				if (buffer_space_left < pipe->max_packet)
-					transaction->actual_bytes +=
-						buffer_space_left;
-				else
-					transaction->actual_bytes +=
-						pipe->max_packet;
-			}
-		} else if ((buffer_space_left == 0) ||
-			   (bytes_in_last_packet < pipe->max_packet)) {
-			pipe->pid_toggle = 1;
-			transaction->stage = CVMX_USB_STAGE_STATUS;
-		}
-		break;
-	case CVMX_USB_STAGE_DATA_SPLIT_COMPLETE:
-		if ((buffer_space_left == 0) ||
-		    (bytes_in_last_packet < pipe->max_packet)) {
-			pipe->pid_toggle = 1;
-			transaction->stage = CVMX_USB_STAGE_STATUS;
-		} else {
-			transaction->stage = CVMX_USB_STAGE_DATA;
-		}
-		break;
-	case CVMX_USB_STAGE_STATUS:
-		if (cvmx_usb_pipe_needs_split(usb, pipe))
-			transaction->stage =
-				CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE;
-		else
-			cvmx_usb_complete(usb, pipe, transaction,
-					  CVMX_USB_STATUS_OK);
-		break;
-	case CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE:
-		cvmx_usb_complete(usb, pipe, transaction, CVMX_USB_STATUS_OK);
-		break;
-	}
-}
-
-static void cvmx_usb_transfer_bulk(struct octeon_hcd *usb,
-				   struct cvmx_usb_pipe *pipe,
-				   struct cvmx_usb_transaction *transaction,
-				   union cvmx_usbcx_hcintx usbc_hcint,
-				   int buffer_space_left,
-				   int bytes_in_last_packet)
-{
-	/*
-	 * The only time a bulk transfer isn't complete when it finishes with
-	 * an ACK is during a split transaction. For splits we need to continue
-	 * the transfer if more data is needed.
-	 */
-	if (cvmx_usb_pipe_needs_split(usb, pipe)) {
-		if (transaction->stage == CVMX_USB_STAGE_NON_CONTROL)
-			transaction->stage =
-				CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE;
-		else if (buffer_space_left &&
-			 (bytes_in_last_packet == pipe->max_packet))
-			transaction->stage = CVMX_USB_STAGE_NON_CONTROL;
-		else
-			cvmx_usb_complete(usb, pipe, transaction,
-					  CVMX_USB_STATUS_OK);
-	} else {
-		if ((pipe->device_speed == CVMX_USB_SPEED_HIGH) &&
-		    (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) &&
-		    (usbc_hcint.s.nak))
-			pipe->flags |= CVMX_USB_PIPE_FLAGS_NEED_PING;
-		if (!buffer_space_left ||
-		    (bytes_in_last_packet < pipe->max_packet))
-			cvmx_usb_complete(usb, pipe, transaction,
-					  CVMX_USB_STATUS_OK);
-	}
-}
-
-static void cvmx_usb_transfer_intr(struct octeon_hcd *usb,
-				   struct cvmx_usb_pipe *pipe,
-				   struct cvmx_usb_transaction *transaction,
-				   int buffer_space_left,
-				   int bytes_in_last_packet)
-{
-	if (cvmx_usb_pipe_needs_split(usb, pipe)) {
-		if (transaction->stage == CVMX_USB_STAGE_NON_CONTROL) {
-			transaction->stage =
-				CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE;
-		} else if (buffer_space_left &&
-			   (bytes_in_last_packet == pipe->max_packet)) {
-			transaction->stage = CVMX_USB_STAGE_NON_CONTROL;
-		} else {
-			pipe->next_tx_frame += pipe->interval;
-			cvmx_usb_complete(usb, pipe, transaction,
-					  CVMX_USB_STATUS_OK);
-		}
-	} else if (!buffer_space_left ||
-		   (bytes_in_last_packet < pipe->max_packet)) {
-		pipe->next_tx_frame += pipe->interval;
-		cvmx_usb_complete(usb, pipe, transaction, CVMX_USB_STATUS_OK);
-	}
-}
-
-static void cvmx_usb_transfer_isoc(struct octeon_hcd *usb,
-				   struct cvmx_usb_pipe *pipe,
-				   struct cvmx_usb_transaction *transaction,
-				   int buffer_space_left,
-				   int bytes_in_last_packet,
-				   int bytes_this_transfer)
-{
-	if (cvmx_usb_pipe_needs_split(usb, pipe)) {
-		/*
-		 * ISOCHRONOUS OUT splits don't require a complete split stage.
-		 * Instead they use a sequence of begin OUT splits to transfer
-		 * the data 188 bytes at a time. Once the transfer is complete,
-		 * the pipe sleeps until the next schedule interval.
-		 */
-		if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) {
-			/*
-			 * If no space left or this wasn't a max size packet
-			 * then this transfer is complete. Otherwise start it
-			 * again to send the next 188 bytes
-			 */
-			if (!buffer_space_left || (bytes_this_transfer < 188)) {
-				pipe->next_tx_frame += pipe->interval;
-				cvmx_usb_complete(usb, pipe, transaction,
-						  CVMX_USB_STATUS_OK);
-			}
-			return;
-		}
-		if (transaction->stage ==
-		    CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE) {
-			/*
-			 * We are in the incoming data phase. Keep getting data
-			 * until we run out of space or get a small packet
-			 */
-			if ((buffer_space_left == 0) ||
-			    (bytes_in_last_packet < pipe->max_packet)) {
-				pipe->next_tx_frame += pipe->interval;
-				cvmx_usb_complete(usb, pipe, transaction,
-						  CVMX_USB_STATUS_OK);
-			}
-		} else {
-			transaction->stage =
-				CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE;
-		}
-	} else {
-		pipe->next_tx_frame += pipe->interval;
-		cvmx_usb_complete(usb, pipe, transaction, CVMX_USB_STATUS_OK);
-	}
-}
-
-/**
- * Poll a channel for status
- *
- * @usb:     USB device
- * @channel: Channel to poll
- *
- * Returns: Zero on success
- */
-static int cvmx_usb_poll_channel(struct octeon_hcd *usb, int channel)
-{
-	struct usb_hcd *hcd = octeon_to_hcd(usb);
-	struct device *dev = hcd->self.controller;
-	union cvmx_usbcx_hcintx usbc_hcint;
-	union cvmx_usbcx_hctsizx usbc_hctsiz;
-	union cvmx_usbcx_hccharx usbc_hcchar;
-	struct cvmx_usb_pipe *pipe;
-	struct cvmx_usb_transaction *transaction;
-	int bytes_this_transfer;
-	int bytes_in_last_packet;
-	int packets_processed;
-	int buffer_space_left;
-
-	/* Read the interrupt status bits for the channel */
-	usbc_hcint.u32 = cvmx_usb_read_csr32(usb,
-					     CVMX_USBCX_HCINTX(channel, usb->index));
-
-	if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) {
-		usbc_hcchar.u32 = cvmx_usb_read_csr32(usb,
-						      CVMX_USBCX_HCCHARX(channel,
-									 usb->index));
-
-		if (usbc_hcchar.s.chena && usbc_hcchar.s.chdis) {
-			/*
-			 * There seems to be a bug in CN31XX which can cause
-			 * interrupt IN transfers to get stuck until we do a
-			 * write of HCCHARX without changing things
-			 */
-			cvmx_usb_write_csr32(usb,
-					     CVMX_USBCX_HCCHARX(channel,
-								usb->index),
-					     usbc_hcchar.u32);
-			return 0;
-		}
-
-		/*
-		 * In non DMA mode the channels don't halt themselves. We need
-		 * to manually disable channels that are left running
-		 */
-		if (!usbc_hcint.s.chhltd) {
-			if (usbc_hcchar.s.chena) {
-				union cvmx_usbcx_hcintmskx hcintmsk;
-				/* Disable all interrupts except CHHLTD */
-				hcintmsk.u32 = 0;
-				hcintmsk.s.chhltdmsk = 1;
-				cvmx_usb_write_csr32(usb,
-						     CVMX_USBCX_HCINTMSKX(channel, usb->index),
-						     hcintmsk.u32);
-				usbc_hcchar.s.chdis = 1;
-				cvmx_usb_write_csr32(usb,
-						     CVMX_USBCX_HCCHARX(channel, usb->index),
-						     usbc_hcchar.u32);
-				return 0;
-			} else if (usbc_hcint.s.xfercompl) {
-				/*
-				 * Successful IN/OUT with transfer complete.
-				 * Channel halt isn't needed.
-				 */
-			} else {
-				dev_err(dev, "USB%d: Channel %d interrupt without halt\n",
-					usb->index, channel);
-				return 0;
-			}
-		}
-	} else {
-		/*
-		 * There is are no interrupts that we need to process when the
-		 * channel is still running
-		 */
-		if (!usbc_hcint.s.chhltd)
-			return 0;
-	}
-
-	/* Disable the channel interrupts now that it is done */
-	cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), 0);
-	usb->idle_hardware_channels |= (1 << channel);
-
-	/* Make sure this channel is tied to a valid pipe */
-	pipe = usb->pipe_for_channel[channel];
-	prefetch(pipe);
-	if (!pipe)
-		return 0;
-	transaction = list_first_entry(&pipe->transactions,
-				       typeof(*transaction),
-				       node);
-	prefetch(transaction);
-
-	/*
-	 * Disconnect this pipe from the HW channel. Later the schedule
-	 * function will figure out which pipe needs to go
-	 */
-	usb->pipe_for_channel[channel] = NULL;
-	pipe->flags &= ~CVMX_USB_PIPE_FLAGS_SCHEDULED;
-
-	/*
-	 * Read the channel config info so we can figure out how much data
-	 * transferred
-	 */
-	usbc_hcchar.u32 = cvmx_usb_read_csr32(usb,
-					      CVMX_USBCX_HCCHARX(channel, usb->index));
-	usbc_hctsiz.u32 = cvmx_usb_read_csr32(usb,
-					      CVMX_USBCX_HCTSIZX(channel, usb->index));
-
-	/*
-	 * Calculating the number of bytes successfully transferred is dependent
-	 * on the transfer direction
-	 */
-	packets_processed = transaction->pktcnt - usbc_hctsiz.s.pktcnt;
-	if (usbc_hcchar.s.epdir) {
-		/*
-		 * IN transactions are easy. For every byte received the
-		 * hardware decrements xfersize. All we need to do is subtract
-		 * the current value of xfersize from its starting value and we
-		 * know how many bytes were written to the buffer
-		 */
-		bytes_this_transfer = transaction->xfersize -
-			usbc_hctsiz.s.xfersize;
-	} else {
-		/*
-		 * OUT transaction don't decrement xfersize. Instead pktcnt is
-		 * decremented on every successful packet send. The hardware
-		 * does this when it receives an ACK, or NYET. If it doesn't
-		 * receive one of these responses pktcnt doesn't change
-		 */
-		bytes_this_transfer = packets_processed * usbc_hcchar.s.mps;
-		/*
-		 * The last packet may not be a full transfer if we didn't have
-		 * enough data
-		 */
-		if (bytes_this_transfer > transaction->xfersize)
-			bytes_this_transfer = transaction->xfersize;
-	}
-	/* Figure out how many bytes were in the last packet of the transfer */
-	if (packets_processed)
-		bytes_in_last_packet = bytes_this_transfer -
-			(packets_processed - 1) * usbc_hcchar.s.mps;
-	else
-		bytes_in_last_packet = bytes_this_transfer;
-
-	/*
-	 * As a special case, setup transactions output the setup header, not
-	 * the user's data. For this reason we don't count setup data as bytes
-	 * transferred
-	 */
-	if ((transaction->stage == CVMX_USB_STAGE_SETUP) ||
-	    (transaction->stage == CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE))
-		bytes_this_transfer = 0;
-
-	/*
-	 * Add the bytes transferred to the running total. It is important that
-	 * bytes_this_transfer doesn't count any data that needs to be
-	 * retransmitted
-	 */
-	transaction->actual_bytes += bytes_this_transfer;
-	if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)
-		buffer_space_left = transaction->iso_packets[0].length -
-			transaction->actual_bytes;
-	else
-		buffer_space_left = transaction->buffer_length -
-			transaction->actual_bytes;
-
-	/*
-	 * We need to remember the PID toggle state for the next transaction.
-	 * The hardware already updated it for the next transaction
-	 */
-	pipe->pid_toggle = !(usbc_hctsiz.s.pid == 0);
-
-	/*
-	 * For high speed bulk out, assume the next transaction will need to do
-	 * a ping before proceeding. If this isn't true the ACK processing below
-	 * will clear this flag
-	 */
-	if ((pipe->device_speed == CVMX_USB_SPEED_HIGH) &&
-	    (pipe->transfer_type == CVMX_USB_TRANSFER_BULK) &&
-	    (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT))
-		pipe->flags |= CVMX_USB_PIPE_FLAGS_NEED_PING;
-
-	if (WARN_ON_ONCE(bytes_this_transfer < 0)) {
-		/*
-		 * In some rare cases the DMA engine seems to get stuck and
-		 * keeps substracting same byte count over and over again. In
-		 * such case we just need to fail every transaction.
-		 */
-		cvmx_usb_complete(usb, pipe, transaction,
-				  CVMX_USB_STATUS_ERROR);
-		return 0;
-	}
-
-	if (usbc_hcint.s.stall) {
-		/*
-		 * STALL as a response means this transaction cannot be
-		 * completed because the device can't process transactions. Tell
-		 * the user. Any data that was transferred will be counted on
-		 * the actual bytes transferred
-		 */
-		pipe->pid_toggle = 0;
-		cvmx_usb_complete(usb, pipe, transaction,
-				  CVMX_USB_STATUS_STALL);
-	} else if (usbc_hcint.s.xacterr) {
-		/*
-		 * XactErr as a response means the device signaled
-		 * something wrong with the transfer. For example, PID
-		 * toggle errors cause these.
-		 */
-		cvmx_usb_complete(usb, pipe, transaction,
-				  CVMX_USB_STATUS_XACTERR);
-	} else if (usbc_hcint.s.bblerr) {
-		/* Babble Error (BblErr) */
-		cvmx_usb_complete(usb, pipe, transaction,
-				  CVMX_USB_STATUS_BABBLEERR);
-	} else if (usbc_hcint.s.datatglerr) {
-		/* Data toggle error */
-		cvmx_usb_complete(usb, pipe, transaction,
-				  CVMX_USB_STATUS_DATATGLERR);
-	} else if (usbc_hcint.s.nyet) {
-		/*
-		 * NYET as a response is only allowed in three cases: as a
-		 * response to a ping, as a response to a split transaction, and
-		 * as a response to a bulk out. The ping case is handled by
-		 * hardware, so we only have splits and bulk out
-		 */
-		if (!cvmx_usb_pipe_needs_split(usb, pipe)) {
-			transaction->retries = 0;
-			/*
-			 * If there is more data to go then we need to try
-			 * again. Otherwise this transaction is complete
-			 */
-			if ((buffer_space_left == 0) ||
-			    (bytes_in_last_packet < pipe->max_packet))
-				cvmx_usb_complete(usb, pipe,
-						  transaction,
-						  CVMX_USB_STATUS_OK);
-		} else {
-			/*
-			 * Split transactions retry the split complete 4 times
-			 * then rewind to the start split and do the entire
-			 * transactions again
-			 */
-			transaction->retries++;
-			if ((transaction->retries & 0x3) == 0) {
-				/*
-				 * Rewind to the beginning of the transaction by
-				 * anding off the split complete bit
-				 */
-				transaction->stage &= ~1;
-				pipe->split_sc_frame = -1;
-			}
-		}
-	} else if (usbc_hcint.s.ack) {
-		transaction->retries = 0;
-		/*
-		 * The ACK bit can only be checked after the other error bits.
-		 * This is because a multi packet transfer may succeed in a
-		 * number of packets and then get a different response on the
-		 * last packet. In this case both ACK and the last response bit
-		 * will be set. If none of the other response bits is set, then
-		 * the last packet must have been an ACK
-		 *
-		 * Since we got an ACK, we know we don't need to do a ping on
-		 * this pipe
-		 */
-		pipe->flags &= ~CVMX_USB_PIPE_FLAGS_NEED_PING;
-
-		switch (transaction->type) {
-		case CVMX_USB_TRANSFER_CONTROL:
-			cvmx_usb_transfer_control(usb, pipe, transaction,
-						  usbc_hcchar,
-						  buffer_space_left,
-						  bytes_in_last_packet);
-			break;
-		case CVMX_USB_TRANSFER_BULK:
-			cvmx_usb_transfer_bulk(usb, pipe, transaction,
-					       usbc_hcint, buffer_space_left,
-					       bytes_in_last_packet);
-			break;
-		case CVMX_USB_TRANSFER_INTERRUPT:
-			cvmx_usb_transfer_intr(usb, pipe, transaction,
-					       buffer_space_left,
-					       bytes_in_last_packet);
-			break;
-		case CVMX_USB_TRANSFER_ISOCHRONOUS:
-			cvmx_usb_transfer_isoc(usb, pipe, transaction,
-					       buffer_space_left,
-					       bytes_in_last_packet,
-					       bytes_this_transfer);
-			break;
-		}
-	} else if (usbc_hcint.s.nak) {
-		/*
-		 * If this was a split then clear our split in progress marker.
-		 */
-		if (usb->active_split == transaction)
-			usb->active_split = NULL;
-		/*
-		 * NAK as a response means the device couldn't accept the
-		 * transaction, but it should be retried in the future. Rewind
-		 * to the beginning of the transaction by anding off the split
-		 * complete bit. Retry in the next interval
-		 */
-		transaction->retries = 0;
-		transaction->stage &= ~1;
-		pipe->next_tx_frame += pipe->interval;
-		if (pipe->next_tx_frame < usb->frame_number)
-			pipe->next_tx_frame = usb->frame_number +
-				pipe->interval -
-				(usb->frame_number - pipe->next_tx_frame) %
-				pipe->interval;
-	} else {
-		struct cvmx_usb_port_status port;
-
-		port = cvmx_usb_get_status(usb);
-		if (port.port_enabled) {
-			/* We'll retry the exact same transaction again */
-			transaction->retries++;
-		} else {
-			/*
-			 * We get channel halted interrupts with no result bits
-			 * sets when the cable is unplugged
-			 */
-			cvmx_usb_complete(usb, pipe, transaction,
-					  CVMX_USB_STATUS_ERROR);
-		}
-	}
-	return 0;
-}
-
-static void octeon_usb_port_callback(struct octeon_hcd *usb)
-{
-	spin_unlock(&usb->lock);
-	usb_hcd_poll_rh_status(octeon_to_hcd(usb));
-	spin_lock(&usb->lock);
-}
-
-/**
- * Poll the USB block for status and call all needed callback
- * handlers. This function is meant to be called in the interrupt
- * handler for the USB controller. It can also be called
- * periodically in a loop for non-interrupt based operation.
- *
- * @usb: USB device state populated by cvmx_usb_initialize().
- *
- * Returns: 0 or a negative error code.
- */
-static int cvmx_usb_poll(struct octeon_hcd *usb)
-{
-	union cvmx_usbcx_hfnum usbc_hfnum;
-	union cvmx_usbcx_gintsts usbc_gintsts;
-
-	prefetch_range(usb, sizeof(*usb));
-
-	/* Update the frame counter */
-	usbc_hfnum.u32 = cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index));
-	if ((usb->frame_number & 0x3fff) > usbc_hfnum.s.frnum)
-		usb->frame_number += 0x4000;
-	usb->frame_number &= ~0x3fffull;
-	usb->frame_number |= usbc_hfnum.s.frnum;
-
-	/* Read the pending interrupts */
-	usbc_gintsts.u32 = cvmx_usb_read_csr32(usb,
-					       CVMX_USBCX_GINTSTS(usb->index));
-
-	/* Clear the interrupts now that we know about them */
-	cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTSTS(usb->index),
-			     usbc_gintsts.u32);
-
-	if (usbc_gintsts.s.rxflvl) {
-		/*
-		 * RxFIFO Non-Empty (RxFLvl)
-		 * Indicates that there is at least one packet pending to be
-		 * read from the RxFIFO.
-		 *
-		 * In DMA mode this is handled by hardware
-		 */
-		if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
-			cvmx_usb_poll_rx_fifo(usb);
-	}
-	if (usbc_gintsts.s.ptxfemp || usbc_gintsts.s.nptxfemp) {
-		/* Fill the Tx FIFOs when not in DMA mode */
-		if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
-			cvmx_usb_poll_tx_fifo(usb);
-	}
-	if (usbc_gintsts.s.disconnint || usbc_gintsts.s.prtint) {
-		union cvmx_usbcx_hprt usbc_hprt;
-		/*
-		 * Disconnect Detected Interrupt (DisconnInt)
-		 * Asserted when a device disconnect is detected.
-		 *
-		 * Host Port Interrupt (PrtInt)
-		 * The core sets this bit to indicate a change in port status of
-		 * one of the O2P USB core ports in Host mode. The application
-		 * must read the Host Port Control and Status (HPRT) register to
-		 * determine the exact event that caused this interrupt. The
-		 * application must clear the appropriate status bit in the Host
-		 * Port Control and Status register to clear this bit.
-		 *
-		 * Call the user's port callback
-		 */
-		octeon_usb_port_callback(usb);
-		/* Clear the port change bits */
-		usbc_hprt.u32 =
-			cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index));
-		usbc_hprt.s.prtena = 0;
-		cvmx_usb_write_csr32(usb, CVMX_USBCX_HPRT(usb->index),
-				     usbc_hprt.u32);
-	}
-	if (usbc_gintsts.s.hchint) {
-		/*
-		 * Host Channels Interrupt (HChInt)
-		 * The core sets this bit to indicate that an interrupt is
-		 * pending on one of the channels of the core (in Host mode).
-		 * The application must read the Host All Channels Interrupt
-		 * (HAINT) register to determine the exact number of the channel
-		 * on which the interrupt occurred, and then read the
-		 * corresponding Host Channel-n Interrupt (HCINTn) register to
-		 * determine the exact cause of the interrupt. The application
-		 * must clear the appropriate status bit in the HCINTn register
-		 * to clear this bit.
-		 */
-		union cvmx_usbcx_haint usbc_haint;
-
-		usbc_haint.u32 = cvmx_usb_read_csr32(usb,
-						     CVMX_USBCX_HAINT(usb->index));
-		while (usbc_haint.u32) {
-			int channel;
-
-			channel = __fls(usbc_haint.u32);
-			cvmx_usb_poll_channel(usb, channel);
-			usbc_haint.u32 ^= 1 << channel;
-		}
-	}
-
-	cvmx_usb_schedule(usb, usbc_gintsts.s.sof);
-
-	return 0;
-}
-
-/* convert between an HCD pointer and the corresponding struct octeon_hcd */
-static inline struct octeon_hcd *hcd_to_octeon(struct usb_hcd *hcd)
-{
-	return (struct octeon_hcd *)(hcd->hcd_priv);
-}
-
-static irqreturn_t octeon_usb_irq(struct usb_hcd *hcd)
-{
-	struct octeon_hcd *usb = hcd_to_octeon(hcd);
-	unsigned long flags;
-
-	spin_lock_irqsave(&usb->lock, flags);
-	cvmx_usb_poll(usb);
-	spin_unlock_irqrestore(&usb->lock, flags);
-	return IRQ_HANDLED;
-}
-
-static int octeon_usb_start(struct usb_hcd *hcd)
-{
-	hcd->state = HC_STATE_RUNNING;
-	return 0;
-}
-
-static void octeon_usb_stop(struct usb_hcd *hcd)
-{
-	hcd->state = HC_STATE_HALT;
-}
-
-static int octeon_usb_get_frame_number(struct usb_hcd *hcd)
-{
-	struct octeon_hcd *usb = hcd_to_octeon(hcd);
-
-	return cvmx_usb_get_frame_number(usb);
-}
-
-static int octeon_usb_urb_enqueue(struct usb_hcd *hcd,
-				  struct urb *urb,
-				  gfp_t mem_flags)
-{
-	struct octeon_hcd *usb = hcd_to_octeon(hcd);
-	struct device *dev = hcd->self.controller;
-	struct cvmx_usb_transaction *transaction = NULL;
-	struct cvmx_usb_pipe *pipe;
-	unsigned long flags;
-	struct cvmx_usb_iso_packet *iso_packet;
-	struct usb_host_endpoint *ep = urb->ep;
-	int rc;
-
-	urb->status = 0;
-	spin_lock_irqsave(&usb->lock, flags);
-
-	rc = usb_hcd_link_urb_to_ep(hcd, urb);
-	if (rc) {
-		spin_unlock_irqrestore(&usb->lock, flags);
-		return rc;
-	}
-
-	if (!ep->hcpriv) {
-		enum cvmx_usb_transfer transfer_type;
-		enum cvmx_usb_speed speed;
-		int split_device = 0;
-		int split_port = 0;
-
-		switch (usb_pipetype(urb->pipe)) {
-		case PIPE_ISOCHRONOUS:
-			transfer_type = CVMX_USB_TRANSFER_ISOCHRONOUS;
-			break;
-		case PIPE_INTERRUPT:
-			transfer_type = CVMX_USB_TRANSFER_INTERRUPT;
-			break;
-		case PIPE_CONTROL:
-			transfer_type = CVMX_USB_TRANSFER_CONTROL;
-			break;
-		default:
-			transfer_type = CVMX_USB_TRANSFER_BULK;
-			break;
-		}
-		switch (urb->dev->speed) {
-		case USB_SPEED_LOW:
-			speed = CVMX_USB_SPEED_LOW;
-			break;
-		case USB_SPEED_FULL:
-			speed = CVMX_USB_SPEED_FULL;
-			break;
-		default:
-			speed = CVMX_USB_SPEED_HIGH;
-			break;
-		}
-		/*
-		 * For slow devices on high speed ports we need to find the hub
-		 * that does the speed translation so we know where to send the
-		 * split transactions.
-		 */
-		if (speed != CVMX_USB_SPEED_HIGH) {
-			/*
-			 * Start at this device and work our way up the usb
-			 * tree.
-			 */
-			struct usb_device *dev = urb->dev;
-
-			while (dev->parent) {
-				/*
-				 * If our parent is high speed then he'll
-				 * receive the splits.
-				 */
-				if (dev->parent->speed == USB_SPEED_HIGH) {
-					split_device = dev->parent->devnum;
-					split_port = dev->portnum;
-					break;
-				}
-				/*
-				 * Move up the tree one level. If we make it all
-				 * the way up the tree, then the port must not
-				 * be in high speed mode and we don't need a
-				 * split.
-				 */
-				dev = dev->parent;
-			}
-		}
-		pipe = cvmx_usb_open_pipe(usb, usb_pipedevice(urb->pipe),
-					  usb_pipeendpoint(urb->pipe), speed,
-					  le16_to_cpu(ep->desc.wMaxPacketSize)
-					  & 0x7ff,
-					  transfer_type,
-					  usb_pipein(urb->pipe) ?
-						CVMX_USB_DIRECTION_IN :
-						CVMX_USB_DIRECTION_OUT,
-					  urb->interval,
-					  (le16_to_cpu(ep->desc.wMaxPacketSize)
-					   >> 11) & 0x3,
-					  split_device, split_port);
-		if (!pipe) {
-			usb_hcd_unlink_urb_from_ep(hcd, urb);
-			spin_unlock_irqrestore(&usb->lock, flags);
-			dev_dbg(dev, "Failed to create pipe\n");
-			return -ENOMEM;
-		}
-		ep->hcpriv = pipe;
-	} else {
-		pipe = ep->hcpriv;
-	}
-
-	switch (usb_pipetype(urb->pipe)) {
-	case PIPE_ISOCHRONOUS:
-		dev_dbg(dev, "Submit isochronous to %d.%d\n",
-			usb_pipedevice(urb->pipe),
-			usb_pipeendpoint(urb->pipe));
-		/*
-		 * Allocate a structure to use for our private list of
-		 * isochronous packets.
-		 */
-		iso_packet = kmalloc_array(urb->number_of_packets,
-					   sizeof(struct cvmx_usb_iso_packet),
-					   GFP_ATOMIC);
-		if (iso_packet) {
-			int i;
-			/* Fill the list with the data from the URB */
-			for (i = 0; i < urb->number_of_packets; i++) {
-				iso_packet[i].offset =
-					urb->iso_frame_desc[i].offset;
-				iso_packet[i].length =
-					urb->iso_frame_desc[i].length;
-				iso_packet[i].status = CVMX_USB_STATUS_ERROR;
-			}
-			/*
-			 * Store a pointer to the list in the URB setup_packet
-			 * field. We know this currently isn't being used and
-			 * this saves us a bunch of logic.
-			 */
-			urb->setup_packet = (char *)iso_packet;
-			transaction = cvmx_usb_submit_isochronous(usb,
-								  pipe, urb);
-			/*
-			 * If submit failed we need to free our private packet
-			 * list.
-			 */
-			if (!transaction) {
-				urb->setup_packet = NULL;
-				kfree(iso_packet);
-			}
-		}
-		break;
-	case PIPE_INTERRUPT:
-		dev_dbg(dev, "Submit interrupt to %d.%d\n",
-			usb_pipedevice(urb->pipe),
-			usb_pipeendpoint(urb->pipe));
-		transaction = cvmx_usb_submit_interrupt(usb, pipe, urb);
-		break;
-	case PIPE_CONTROL:
-		dev_dbg(dev, "Submit control to %d.%d\n",
-			usb_pipedevice(urb->pipe),
-			usb_pipeendpoint(urb->pipe));
-		transaction = cvmx_usb_submit_control(usb, pipe, urb);
-		break;
-	case PIPE_BULK:
-		dev_dbg(dev, "Submit bulk to %d.%d\n",
-			usb_pipedevice(urb->pipe),
-			usb_pipeendpoint(urb->pipe));
-		transaction = cvmx_usb_submit_bulk(usb, pipe, urb);
-		break;
-	}
-	if (!transaction) {
-		usb_hcd_unlink_urb_from_ep(hcd, urb);
-		spin_unlock_irqrestore(&usb->lock, flags);
-		dev_dbg(dev, "Failed to submit\n");
-		return -ENOMEM;
-	}
-	urb->hcpriv = transaction;
-	spin_unlock_irqrestore(&usb->lock, flags);
-	return 0;
-}
-
-static int octeon_usb_urb_dequeue(struct usb_hcd *hcd,
-				  struct urb *urb,
-				  int status)
-{
-	struct octeon_hcd *usb = hcd_to_octeon(hcd);
-	unsigned long flags;
-	int rc;
-
-	if (!urb->dev)
-		return -EINVAL;
-
-	spin_lock_irqsave(&usb->lock, flags);
-
-	rc = usb_hcd_check_unlink_urb(hcd, urb, status);
-	if (rc)
-		goto out;
-
-	urb->status = status;
-	cvmx_usb_cancel(usb, urb->ep->hcpriv, urb->hcpriv);
-
-out:
-	spin_unlock_irqrestore(&usb->lock, flags);
-
-	return rc;
-}
-
-static void octeon_usb_endpoint_disable(struct usb_hcd *hcd,
-					struct usb_host_endpoint *ep)
-{
-	struct device *dev = hcd->self.controller;
-
-	if (ep->hcpriv) {
-		struct octeon_hcd *usb = hcd_to_octeon(hcd);
-		struct cvmx_usb_pipe *pipe = ep->hcpriv;
-		unsigned long flags;
-
-		spin_lock_irqsave(&usb->lock, flags);
-		cvmx_usb_cancel_all(usb, pipe);
-		if (cvmx_usb_close_pipe(usb, pipe))
-			dev_dbg(dev, "Closing pipe %p failed\n", pipe);
-		spin_unlock_irqrestore(&usb->lock, flags);
-		ep->hcpriv = NULL;
-	}
-}
-
-static int octeon_usb_hub_status_data(struct usb_hcd *hcd, char *buf)
-{
-	struct octeon_hcd *usb = hcd_to_octeon(hcd);
-	struct cvmx_usb_port_status port_status;
-	unsigned long flags;
-
-	spin_lock_irqsave(&usb->lock, flags);
-	port_status = cvmx_usb_get_status(usb);
-	spin_unlock_irqrestore(&usb->lock, flags);
-	buf[0] = port_status.connect_change << 1;
-
-	return buf[0] != 0;
-}
-
-static int octeon_usb_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
-				  u16 wIndex, char *buf, u16 wLength)
-{
-	struct octeon_hcd *usb = hcd_to_octeon(hcd);
-	struct device *dev = hcd->self.controller;
-	struct cvmx_usb_port_status usb_port_status;
-	int port_status;
-	struct usb_hub_descriptor *desc;
-	unsigned long flags;
-
-	switch (typeReq) {
-	case ClearHubFeature:
-		dev_dbg(dev, "ClearHubFeature\n");
-		switch (wValue) {
-		case C_HUB_LOCAL_POWER:
-		case C_HUB_OVER_CURRENT:
-			/* Nothing required here */
-			break;
-		default:
-			return -EINVAL;
-		}
-		break;
-	case ClearPortFeature:
-		dev_dbg(dev, "ClearPortFeature\n");
-		if (wIndex != 1) {
-			dev_dbg(dev, " INVALID\n");
-			return -EINVAL;
-		}
-
-		switch (wValue) {
-		case USB_PORT_FEAT_ENABLE:
-			dev_dbg(dev, " ENABLE\n");
-			spin_lock_irqsave(&usb->lock, flags);
-			cvmx_usb_disable(usb);
-			spin_unlock_irqrestore(&usb->lock, flags);
-			break;
-		case USB_PORT_FEAT_SUSPEND:
-			dev_dbg(dev, " SUSPEND\n");
-			/* Not supported on Octeon */
-			break;
-		case USB_PORT_FEAT_POWER:
-			dev_dbg(dev, " POWER\n");
-			/* Not supported on Octeon */
-			break;
-		case USB_PORT_FEAT_INDICATOR:
-			dev_dbg(dev, " INDICATOR\n");
-			/* Port inidicator not supported */
-			break;
-		case USB_PORT_FEAT_C_CONNECTION:
-			dev_dbg(dev, " C_CONNECTION\n");
-			/* Clears drivers internal connect status change flag */
-			spin_lock_irqsave(&usb->lock, flags);
-			usb->port_status = cvmx_usb_get_status(usb);
-			spin_unlock_irqrestore(&usb->lock, flags);
-			break;
-		case USB_PORT_FEAT_C_RESET:
-			dev_dbg(dev, " C_RESET\n");
-			/*
-			 * Clears the driver's internal Port Reset Change flag.
-			 */
-			spin_lock_irqsave(&usb->lock, flags);
-			usb->port_status = cvmx_usb_get_status(usb);
-			spin_unlock_irqrestore(&usb->lock, flags);
-			break;
-		case USB_PORT_FEAT_C_ENABLE:
-			dev_dbg(dev, " C_ENABLE\n");
-			/*
-			 * Clears the driver's internal Port Enable/Disable
-			 * Change flag.
-			 */
-			spin_lock_irqsave(&usb->lock, flags);
-			usb->port_status = cvmx_usb_get_status(usb);
-			spin_unlock_irqrestore(&usb->lock, flags);
-			break;
-		case USB_PORT_FEAT_C_SUSPEND:
-			dev_dbg(dev, " C_SUSPEND\n");
-			/*
-			 * Clears the driver's internal Port Suspend Change
-			 * flag, which is set when resume signaling on the host
-			 * port is complete.
-			 */
-			break;
-		case USB_PORT_FEAT_C_OVER_CURRENT:
-			dev_dbg(dev, " C_OVER_CURRENT\n");
-			/* Clears the driver's overcurrent Change flag */
-			spin_lock_irqsave(&usb->lock, flags);
-			usb->port_status = cvmx_usb_get_status(usb);
-			spin_unlock_irqrestore(&usb->lock, flags);
-			break;
-		default:
-			dev_dbg(dev, " UNKNOWN\n");
-			return -EINVAL;
-		}
-		break;
-	case GetHubDescriptor:
-		dev_dbg(dev, "GetHubDescriptor\n");
-		desc = (struct usb_hub_descriptor *)buf;
-		desc->bDescLength = 9;
-		desc->bDescriptorType = 0x29;
-		desc->bNbrPorts = 1;
-		desc->wHubCharacteristics = cpu_to_le16(0x08);
-		desc->bPwrOn2PwrGood = 1;
-		desc->bHubContrCurrent = 0;
-		desc->u.hs.DeviceRemovable[0] = 0;
-		desc->u.hs.DeviceRemovable[1] = 0xff;
-		break;
-	case GetHubStatus:
-		dev_dbg(dev, "GetHubStatus\n");
-		*(__le32 *)buf = 0;
-		break;
-	case GetPortStatus:
-		dev_dbg(dev, "GetPortStatus\n");
-		if (wIndex != 1) {
-			dev_dbg(dev, " INVALID\n");
-			return -EINVAL;
-		}
-
-		spin_lock_irqsave(&usb->lock, flags);
-		usb_port_status = cvmx_usb_get_status(usb);
-		spin_unlock_irqrestore(&usb->lock, flags);
-		port_status = 0;
-
-		if (usb_port_status.connect_change) {
-			port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
-			dev_dbg(dev, " C_CONNECTION\n");
-		}
-
-		if (usb_port_status.port_enabled) {
-			port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
-			dev_dbg(dev, " C_ENABLE\n");
-		}
-
-		if (usb_port_status.connected) {
-			port_status |= (1 << USB_PORT_FEAT_CONNECTION);
-			dev_dbg(dev, " CONNECTION\n");
-		}
-
-		if (usb_port_status.port_enabled) {
-			port_status |= (1 << USB_PORT_FEAT_ENABLE);
-			dev_dbg(dev, " ENABLE\n");
-		}
-
-		if (usb_port_status.port_over_current) {
-			port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
-			dev_dbg(dev, " OVER_CURRENT\n");
-		}
-
-		if (usb_port_status.port_powered) {
-			port_status |= (1 << USB_PORT_FEAT_POWER);
-			dev_dbg(dev, " POWER\n");
-		}
-
-		if (usb_port_status.port_speed == CVMX_USB_SPEED_HIGH) {
-			port_status |= USB_PORT_STAT_HIGH_SPEED;
-			dev_dbg(dev, " HIGHSPEED\n");
-		} else if (usb_port_status.port_speed == CVMX_USB_SPEED_LOW) {
-			port_status |= (1 << USB_PORT_FEAT_LOWSPEED);
-			dev_dbg(dev, " LOWSPEED\n");
-		}
-
-		*((__le32 *)buf) = cpu_to_le32(port_status);
-		break;
-	case SetHubFeature:
-		dev_dbg(dev, "SetHubFeature\n");
-		/* No HUB features supported */
-		break;
-	case SetPortFeature:
-		dev_dbg(dev, "SetPortFeature\n");
-		if (wIndex != 1) {
-			dev_dbg(dev, " INVALID\n");
-			return -EINVAL;
-		}
-
-		switch (wValue) {
-		case USB_PORT_FEAT_SUSPEND:
-			dev_dbg(dev, " SUSPEND\n");
-			return -EINVAL;
-		case USB_PORT_FEAT_POWER:
-			dev_dbg(dev, " POWER\n");
-			/*
-			 * Program the port power bit to drive VBUS on the USB.
-			 */
-			spin_lock_irqsave(&usb->lock, flags);
-			USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index),
-					cvmx_usbcx_hprt, prtpwr, 1);
-			spin_unlock_irqrestore(&usb->lock, flags);
-			return 0;
-		case USB_PORT_FEAT_RESET:
-			dev_dbg(dev, " RESET\n");
-			spin_lock_irqsave(&usb->lock, flags);
-			cvmx_usb_reset_port(usb);
-			spin_unlock_irqrestore(&usb->lock, flags);
-			return 0;
-		case USB_PORT_FEAT_INDICATOR:
-			dev_dbg(dev, " INDICATOR\n");
-			/* Not supported */
-			break;
-		default:
-			dev_dbg(dev, " UNKNOWN\n");
-			return -EINVAL;
-		}
-		break;
-	default:
-		dev_dbg(dev, "Unknown root hub request\n");
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static const struct hc_driver octeon_hc_driver = {
-	.description		= "Octeon USB",
-	.product_desc		= "Octeon Host Controller",
-	.hcd_priv_size		= sizeof(struct octeon_hcd),
-	.irq			= octeon_usb_irq,
-	.flags			= HCD_MEMORY | HCD_DMA | HCD_USB2,
-	.start			= octeon_usb_start,
-	.stop			= octeon_usb_stop,
-	.urb_enqueue		= octeon_usb_urb_enqueue,
-	.urb_dequeue		= octeon_usb_urb_dequeue,
-	.endpoint_disable	= octeon_usb_endpoint_disable,
-	.get_frame_number	= octeon_usb_get_frame_number,
-	.hub_status_data	= octeon_usb_hub_status_data,
-	.hub_control		= octeon_usb_hub_control,
-	.map_urb_for_dma	= octeon_map_urb_for_dma,
-	.unmap_urb_for_dma	= octeon_unmap_urb_for_dma,
-};
-
-static int octeon_usb_probe(struct platform_device *pdev)
-{
-	int status;
-	int initialize_flags;
-	int usb_num;
-	struct resource *res_mem;
-	struct device_node *usbn_node;
-	int irq = platform_get_irq(pdev, 0);
-	struct device *dev = &pdev->dev;
-	struct octeon_hcd *usb;
-	struct usb_hcd *hcd;
-	u32 clock_rate = 48000000;
-	bool is_crystal_clock = false;
-	const char *clock_type;
-	int i;
-
-	if (!dev->of_node) {
-		dev_err(dev, "Error: empty of_node\n");
-		return -ENXIO;
-	}
-	usbn_node = dev->of_node->parent;
-
-	i = of_property_read_u32(usbn_node,
-				 "clock-frequency", &clock_rate);
-	if (i)
-		i = of_property_read_u32(usbn_node,
-					 "refclk-frequency", &clock_rate);
-	if (i) {
-		dev_err(dev, "No USBN \"clock-frequency\"\n");
-		return -ENXIO;
-	}
-	switch (clock_rate) {
-	case 12000000:
-		initialize_flags = CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ;
-		break;
-	case 24000000:
-		initialize_flags = CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ;
-		break;
-	case 48000000:
-		initialize_flags = CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ;
-		break;
-	default:
-		dev_err(dev, "Illegal USBN \"clock-frequency\" %u\n",
-			clock_rate);
-		return -ENXIO;
-	}
-
-	i = of_property_read_string(usbn_node,
-				    "cavium,refclk-type", &clock_type);
-	if (i)
-		i = of_property_read_string(usbn_node,
-					    "refclk-type", &clock_type);
-
-	if (!i && strcmp("crystal", clock_type) == 0)
-		is_crystal_clock = true;
-
-	if (is_crystal_clock)
-		initialize_flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI;
-	else
-		initialize_flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND;
-
-	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res_mem) {
-		dev_err(dev, "found no memory resource\n");
-		return -ENXIO;
-	}
-	usb_num = (res_mem->start >> 44) & 1;
-
-	if (irq < 0) {
-		/* Defective device tree, but we know how to fix it. */
-		irq_hw_number_t hwirq = usb_num ? (1 << 6) + 17 : 56;
-
-		irq = irq_create_mapping(NULL, hwirq);
-	}
-
-	/*
-	 * Set the DMA mask to 64bits so we get buffers already translated for
-	 * DMA.
-	 */
-	i = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(64));
-	if (i)
-		return i;
-
-	/*
-	 * Only cn52XX and cn56XX have DWC_OTG USB hardware and the
-	 * IOB priority registers.  Under heavy network load USB
-	 * hardware can be starved by the IOB causing a crash.  Give
-	 * it a priority boost if it has been waiting more than 400
-	 * cycles to avoid this situation.
-	 *
-	 * Testing indicates that a cnt_val of 8192 is not sufficient,
-	 * but no failures are seen with 4096.  We choose a value of
-	 * 400 to give a safety factor of 10.
-	 */
-	if (OCTEON_IS_MODEL(OCTEON_CN52XX) || OCTEON_IS_MODEL(OCTEON_CN56XX)) {
-		union cvmx_iob_n2c_l2c_pri_cnt pri_cnt;
-
-		pri_cnt.u64 = 0;
-		pri_cnt.s.cnt_enb = 1;
-		pri_cnt.s.cnt_val = 400;
-		cvmx_write_csr(CVMX_IOB_N2C_L2C_PRI_CNT, pri_cnt.u64);
-	}
-
-	hcd = usb_create_hcd(&octeon_hc_driver, dev, dev_name(dev));
-	if (!hcd) {
-		dev_dbg(dev, "Failed to allocate memory for HCD\n");
-		return -1;
-	}
-	hcd->uses_new_polling = 1;
-	usb = (struct octeon_hcd *)hcd->hcd_priv;
-
-	spin_lock_init(&usb->lock);
-
-	usb->init_flags = initialize_flags;
-
-	/* Initialize the USB state structure */
-	usb->index = usb_num;
-	INIT_LIST_HEAD(&usb->idle_pipes);
-	for (i = 0; i < ARRAY_SIZE(usb->active_pipes); i++)
-		INIT_LIST_HEAD(&usb->active_pipes[i]);
-
-	/* Due to an errata, CN31XX doesn't support DMA */
-	if (OCTEON_IS_MODEL(OCTEON_CN31XX)) {
-		usb->init_flags |= CVMX_USB_INITIALIZE_FLAGS_NO_DMA;
-		/* Only use one channel with non DMA */
-		usb->idle_hardware_channels = 0x1;
-	} else if (OCTEON_IS_MODEL(OCTEON_CN5XXX)) {
-		/* CN5XXX have an errata with channel 3 */
-		usb->idle_hardware_channels = 0xf7;
-	} else {
-		usb->idle_hardware_channels = 0xff;
-	}
-
-	status = cvmx_usb_initialize(dev, usb);
-	if (status) {
-		dev_dbg(dev, "USB initialization failed with %d\n", status);
-		usb_put_hcd(hcd);
-		return -1;
-	}
-
-	status = usb_add_hcd(hcd, irq, 0);
-	if (status) {
-		dev_dbg(dev, "USB add HCD failed with %d\n", status);
-		usb_put_hcd(hcd);
-		return -1;
-	}
-	device_wakeup_enable(hcd->self.controller);
-
-	dev_info(dev, "Registered HCD for port %d on irq %d\n", usb_num, irq);
-
-	return 0;
-}
-
-static int octeon_usb_remove(struct platform_device *pdev)
-{
-	int status;
-	struct device *dev = &pdev->dev;
-	struct usb_hcd *hcd = dev_get_drvdata(dev);
-	struct octeon_hcd *usb = hcd_to_octeon(hcd);
-	unsigned long flags;
-
-	usb_remove_hcd(hcd);
-	spin_lock_irqsave(&usb->lock, flags);
-	status = cvmx_usb_shutdown(usb);
-	spin_unlock_irqrestore(&usb->lock, flags);
-	if (status)
-		dev_dbg(dev, "USB shutdown failed with %d\n", status);
-
-	usb_put_hcd(hcd);
-
-	return 0;
-}
-
-static const struct of_device_id octeon_usb_match[] = {
-	{
-		.compatible = "cavium,octeon-5750-usbc",
-	},
-	{},
-};
-MODULE_DEVICE_TABLE(of, octeon_usb_match);
-
-static struct platform_driver octeon_usb_driver = {
-	.driver = {
-		.name		= "octeon-hcd",
-		.of_match_table = octeon_usb_match,
-	},
-	.probe      = octeon_usb_probe,
-	.remove     = octeon_usb_remove,
-};
-
-static int __init octeon_usb_driver_init(void)
-{
-	if (usb_disabled())
-		return 0;
-
-	return platform_driver_register(&octeon_usb_driver);
-}
-module_init(octeon_usb_driver_init);
-
-static void __exit octeon_usb_driver_exit(void)
-{
-	if (usb_disabled())
-		return;
-
-	platform_driver_unregister(&octeon_usb_driver);
-}
-module_exit(octeon_usb_driver_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Cavium, Inc. <support@cavium.com>");
-MODULE_DESCRIPTION("Cavium Inc. OCTEON USB Host driver.");
diff --git a/drivers/staging/octeon-usb/octeon-hcd.h b/drivers/staging/octeon-usb/octeon-hcd.h
deleted file mode 100644
index 9ed619c93a4e..000000000000
--- a/drivers/staging/octeon-usb/octeon-hcd.h
+++ /dev/null
@@ -1,1847 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Octeon HCD hardware register definitions.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Some parts of the code were originally released under BSD license:
- *
- * Copyright (c) 2003-2010 Cavium Networks (support@cavium.com). All rights
- * reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *
- *   * Redistributions in binary form must reproduce the above
- *     copyright notice, this list of conditions and the following
- *     disclaimer in the documentation and/or other materials provided
- *     with the distribution.
- *
- *   * Neither the name of Cavium Networks nor the names of
- *     its contributors may be used to endorse or promote products
- *     derived from this software without specific prior written
- *     permission.
- *
- * This Software, including technical data, may be subject to U.S. export
- * control laws, including the U.S. Export Administration Act and its associated
- * regulations, and may be subject to export or import regulations in other
- * countries.
- *
- * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
- * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
- * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
- * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION
- * OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
- * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
- * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
- * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
- * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
- * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
- */
-
-#ifndef __OCTEON_HCD_H__
-#define __OCTEON_HCD_H__
-
-#include <asm/bitfield.h>
-
-#define CVMX_USBCXBASE 0x00016F0010000000ull
-#define CVMX_USBCXREG1(reg, bid) \
-	(CVMX_ADD_IO_SEG(CVMX_USBCXBASE | reg) + \
-	 ((bid) & 1) * 0x100000000000ull)
-#define CVMX_USBCXREG2(reg, bid, off) \
-	(CVMX_ADD_IO_SEG(CVMX_USBCXBASE | reg) + \
-	 (((off) & 7) + ((bid) & 1) * 0x8000000000ull) * 32)
-
-#define CVMX_USBCX_GAHBCFG(bid)		CVMX_USBCXREG1(0x008, bid)
-#define CVMX_USBCX_GHWCFG3(bid)		CVMX_USBCXREG1(0x04c, bid)
-#define CVMX_USBCX_GINTMSK(bid)		CVMX_USBCXREG1(0x018, bid)
-#define CVMX_USBCX_GINTSTS(bid)		CVMX_USBCXREG1(0x014, bid)
-#define CVMX_USBCX_GNPTXFSIZ(bid)	CVMX_USBCXREG1(0x028, bid)
-#define CVMX_USBCX_GNPTXSTS(bid)	CVMX_USBCXREG1(0x02c, bid)
-#define CVMX_USBCX_GOTGCTL(bid)		CVMX_USBCXREG1(0x000, bid)
-#define CVMX_USBCX_GRSTCTL(bid)		CVMX_USBCXREG1(0x010, bid)
-#define CVMX_USBCX_GRXFSIZ(bid)		CVMX_USBCXREG1(0x024, bid)
-#define CVMX_USBCX_GRXSTSPH(bid)	CVMX_USBCXREG1(0x020, bid)
-#define CVMX_USBCX_GUSBCFG(bid)		CVMX_USBCXREG1(0x00c, bid)
-#define CVMX_USBCX_HAINT(bid)		CVMX_USBCXREG1(0x414, bid)
-#define CVMX_USBCX_HAINTMSK(bid)	CVMX_USBCXREG1(0x418, bid)
-#define CVMX_USBCX_HCCHARX(off, bid)	CVMX_USBCXREG2(0x500, bid, off)
-#define CVMX_USBCX_HCFG(bid)		CVMX_USBCXREG1(0x400, bid)
-#define CVMX_USBCX_HCINTMSKX(off, bid)	CVMX_USBCXREG2(0x50c, bid, off)
-#define CVMX_USBCX_HCINTX(off, bid)	CVMX_USBCXREG2(0x508, bid, off)
-#define CVMX_USBCX_HCSPLTX(off, bid)	CVMX_USBCXREG2(0x504, bid, off)
-#define CVMX_USBCX_HCTSIZX(off, bid)	CVMX_USBCXREG2(0x510, bid, off)
-#define CVMX_USBCX_HFIR(bid)		CVMX_USBCXREG1(0x404, bid)
-#define CVMX_USBCX_HFNUM(bid)		CVMX_USBCXREG1(0x408, bid)
-#define CVMX_USBCX_HPRT(bid)		CVMX_USBCXREG1(0x440, bid)
-#define CVMX_USBCX_HPTXFSIZ(bid)	CVMX_USBCXREG1(0x100, bid)
-#define CVMX_USBCX_HPTXSTS(bid)		CVMX_USBCXREG1(0x410, bid)
-
-#define CVMX_USBNXBID1(bid) (((bid) & 1) * 0x10000000ull)
-#define CVMX_USBNXBID2(bid) (((bid) & 1) * 0x100000000000ull)
-
-#define CVMX_USBNXREG1(reg, bid) \
-	(CVMX_ADD_IO_SEG(0x0001180068000000ull | reg) + CVMX_USBNXBID1(bid))
-#define CVMX_USBNXREG2(reg, bid) \
-	(CVMX_ADD_IO_SEG(0x00016F0000000000ull | reg) + CVMX_USBNXBID2(bid))
-
-#define CVMX_USBNX_CLK_CTL(bid)		CVMX_USBNXREG1(0x10, bid)
-#define CVMX_USBNX_DMA0_INB_CHN0(bid)	CVMX_USBNXREG2(0x818, bid)
-#define CVMX_USBNX_DMA0_OUTB_CHN0(bid)	CVMX_USBNXREG2(0x858, bid)
-#define CVMX_USBNX_USBP_CTL_STATUS(bid)	CVMX_USBNXREG1(0x18, bid)
-
-/**
- * cvmx_usbc#_gahbcfg
- *
- * Core AHB Configuration Register (GAHBCFG)
- *
- * This register can be used to configure the core after power-on or a change in
- * mode of operation. This register mainly contains AHB system-related
- * configuration parameters. The AHB is the processor interface to the O2P USB
- * core. In general, software need not know about this interface except to
- * program the values as specified.
- *
- * The application must program this register as part of the O2P USB core
- * initialization. Do not change this register after the initial programming.
- */
-union cvmx_usbcx_gahbcfg {
-	u32 u32;
-	/**
-	 * struct cvmx_usbcx_gahbcfg_s
-	 * @ptxfemplvl: Periodic TxFIFO Empty Level (PTxFEmpLvl)
-	 *	Software should set this bit to 0x1.
-	 *	Indicates when the Periodic TxFIFO Empty Interrupt bit in the
-	 *	Core Interrupt register (GINTSTS.PTxFEmp) is triggered. This
-	 *	bit is used only in Slave mode.
-	 *	* 1'b0: GINTSTS.PTxFEmp interrupt indicates that the Periodic
-	 *	TxFIFO is half empty
-	 *	* 1'b1: GINTSTS.PTxFEmp interrupt indicates that the Periodic
-	 *	TxFIFO is completely empty
-	 * @nptxfemplvl: Non-Periodic TxFIFO Empty Level (NPTxFEmpLvl)
-	 *	Software should set this bit to 0x1.
-	 *	Indicates when the Non-Periodic TxFIFO Empty Interrupt bit in
-	 *	the Core Interrupt register (GINTSTS.NPTxFEmp) is triggered.
-	 *	This bit is used only in Slave mode.
-	 *	* 1'b0: GINTSTS.NPTxFEmp interrupt indicates that the Non-
-	 *	Periodic TxFIFO is half empty
-	 *	* 1'b1: GINTSTS.NPTxFEmp interrupt indicates that the Non-
-	 *	Periodic TxFIFO is completely empty
-	 * @dmaen: DMA Enable (DMAEn)
-	 *	* 1'b0: Core operates in Slave mode
-	 *	* 1'b1: Core operates in a DMA mode
-	 * @hbstlen: Burst Length/Type (HBstLen)
-	 *	This field has not effect and should be left as 0x0.
-	 * @glblintrmsk: Global Interrupt Mask (GlblIntrMsk)
-	 *	Software should set this field to 0x1.
-	 *	The application uses this bit to mask or unmask the interrupt
-	 *	line assertion to itself. Irrespective of this bit's setting,
-	 *	the interrupt status registers are updated by the core.
-	 *	* 1'b0: Mask the interrupt assertion to the application.
-	 *	* 1'b1: Unmask the interrupt assertion to the application.
-	 */
-	struct cvmx_usbcx_gahbcfg_s {
-		__BITFIELD_FIELD(u32 reserved_9_31	: 23,
-		__BITFIELD_FIELD(u32 ptxfemplvl		: 1,
-		__BITFIELD_FIELD(u32 nptxfemplvl	: 1,
-		__BITFIELD_FIELD(u32 reserved_6_6	: 1,
-		__BITFIELD_FIELD(u32 dmaen		: 1,
-		__BITFIELD_FIELD(u32 hbstlen		: 4,
-		__BITFIELD_FIELD(u32 glblintrmsk	: 1,
-		;)))))))
-	} s;
-};
-
-/**
- * cvmx_usbc#_ghwcfg3
- *
- * User HW Config3 Register (GHWCFG3)
- *
- * This register contains the configuration options of the O2P USB core.
- */
-union cvmx_usbcx_ghwcfg3 {
-	u32 u32;
-	/**
-	 * struct cvmx_usbcx_ghwcfg3_s
-	 * @dfifodepth: DFIFO Depth (DfifoDepth)
-	 *	This value is in terms of 32-bit words.
-	 *	* Minimum value is 32
-	 *	* Maximum value is 32768
-	 * @ahbphysync: AHB and PHY Synchronous (AhbPhySync)
-	 *	Indicates whether AHB and PHY clocks are synchronous to
-	 *	each other.
-	 *	* 1'b0: No
-	 *	* 1'b1: Yes
-	 *	This bit is tied to 1.
-	 * @rsttype: Reset Style for Clocked always Blocks in RTL (RstType)
-	 *	* 1'b0: Asynchronous reset is used in the core
-	 *	* 1'b1: Synchronous reset is used in the core
-	 * @optfeature: Optional Features Removed (OptFeature)
-	 *	Indicates whether the User ID register, GPIO interface ports,
-	 *	and SOF toggle and counter ports were removed for gate count
-	 *	optimization.
-	 * @vendor_control_interface_support: Vendor Control Interface Support
-	 *	* 1'b0: Vendor Control Interface is not available on the core.
-	 *	* 1'b1: Vendor Control Interface is available.
-	 * @i2c_selection: I2C Selection
-	 *	* 1'b0: I2C Interface is not available on the core.
-	 *	* 1'b1: I2C Interface is available on the core.
-	 * @otgen: OTG Function Enabled (OtgEn)
-	 *	The application uses this bit to indicate the O2P USB core's
-	 *	OTG capabilities.
-	 *	* 1'b0: Not OTG capable
-	 *	* 1'b1: OTG Capable
-	 * @pktsizewidth: Width of Packet Size Counters (PktSizeWidth)
-	 *	* 3'b000: 4 bits
-	 *	* 3'b001: 5 bits
-	 *	* 3'b010: 6 bits
-	 *	* 3'b011: 7 bits
-	 *	* 3'b100: 8 bits
-	 *	* 3'b101: 9 bits
-	 *	* 3'b110: 10 bits
-	 *	* Others: Reserved
-	 * @xfersizewidth: Width of Transfer Size Counters (XferSizeWidth)
-	 *	* 4'b0000: 11 bits
-	 *	* 4'b0001: 12 bits
-	 *	- ...
-	 *	* 4'b1000: 19 bits
-	 *	* Others: Reserved
-	 */
-	struct cvmx_usbcx_ghwcfg3_s {
-		__BITFIELD_FIELD(u32 dfifodepth				: 16,
-		__BITFIELD_FIELD(u32 reserved_13_15			: 3,
-		__BITFIELD_FIELD(u32 ahbphysync				: 1,
-		__BITFIELD_FIELD(u32 rsttype				: 1,
-		__BITFIELD_FIELD(u32 optfeature				: 1,
-		__BITFIELD_FIELD(u32 vendor_control_interface_support	: 1,
-		__BITFIELD_FIELD(u32 i2c_selection			: 1,
-		__BITFIELD_FIELD(u32 otgen				: 1,
-		__BITFIELD_FIELD(u32 pktsizewidth			: 3,
-		__BITFIELD_FIELD(u32 xfersizewidth			: 4,
-		;))))))))))
-	} s;
-};
-
-/**
- * cvmx_usbc#_gintmsk
- *
- * Core Interrupt Mask Register (GINTMSK)
- *
- * This register works with the Core Interrupt register to interrupt the
- * application. When an interrupt bit is masked, the interrupt associated with
- * that bit will not be generated. However, the Core Interrupt (GINTSTS)
- * register bit corresponding to that interrupt will still be set.
- * Mask interrupt: 1'b0, Unmask interrupt: 1'b1
- */
-union cvmx_usbcx_gintmsk {
-	u32 u32;
-	/**
-	 * struct cvmx_usbcx_gintmsk_s
-	 * @wkupintmsk: Resume/Remote Wakeup Detected Interrupt Mask
-	 *	(WkUpIntMsk)
-	 * @sessreqintmsk: Session Request/New Session Detected Interrupt Mask
-	 *	(SessReqIntMsk)
-	 * @disconnintmsk: Disconnect Detected Interrupt Mask (DisconnIntMsk)
-	 * @conidstschngmsk: Connector ID Status Change Mask (ConIDStsChngMsk)
-	 * @ptxfempmsk: Periodic TxFIFO Empty Mask (PTxFEmpMsk)
-	 * @hchintmsk: Host Channels Interrupt Mask (HChIntMsk)
-	 * @prtintmsk: Host Port Interrupt Mask (PrtIntMsk)
-	 * @fetsuspmsk: Data Fetch Suspended Mask (FetSuspMsk)
-	 * @incomplpmsk: Incomplete Periodic Transfer Mask (incomplPMsk)
-	 *	Incomplete Isochronous OUT Transfer Mask
-	 *	(incompISOOUTMsk)
-	 * @incompisoinmsk: Incomplete Isochronous IN Transfer Mask
-	 *		    (incompISOINMsk)
-	 * @oepintmsk: OUT Endpoints Interrupt Mask (OEPIntMsk)
-	 * @inepintmsk: IN Endpoints Interrupt Mask (INEPIntMsk)
-	 * @epmismsk: Endpoint Mismatch Interrupt Mask (EPMisMsk)
-	 * @eopfmsk: End of Periodic Frame Interrupt Mask (EOPFMsk)
-	 * @isooutdropmsk: Isochronous OUT Packet Dropped Interrupt Mask
-	 *	(ISOOutDropMsk)
-	 * @enumdonemsk: Enumeration Done Mask (EnumDoneMsk)
-	 * @usbrstmsk: USB Reset Mask (USBRstMsk)
-	 * @usbsuspmsk: USB Suspend Mask (USBSuspMsk)
-	 * @erlysuspmsk: Early Suspend Mask (ErlySuspMsk)
-	 * @i2cint: I2C Interrupt Mask (I2CINT)
-	 * @ulpickintmsk: ULPI Carkit Interrupt Mask (ULPICKINTMsk)
-	 *	I2C Carkit Interrupt Mask (I2CCKINTMsk)
-	 * @goutnakeffmsk: Global OUT NAK Effective Mask (GOUTNakEffMsk)
-	 * @ginnakeffmsk: Global Non-Periodic IN NAK Effective Mask
-	 *		  (GINNakEffMsk)
-	 * @nptxfempmsk: Non-Periodic TxFIFO Empty Mask (NPTxFEmpMsk)
-	 * @rxflvlmsk: Receive FIFO Non-Empty Mask (RxFLvlMsk)
-	 * @sofmsk: Start of (micro)Frame Mask (SofMsk)
-	 * @otgintmsk: OTG Interrupt Mask (OTGIntMsk)
-	 * @modemismsk: Mode Mismatch Interrupt Mask (ModeMisMsk)
-	 */
-	struct cvmx_usbcx_gintmsk_s {
-		__BITFIELD_FIELD(u32 wkupintmsk		: 1,
-		__BITFIELD_FIELD(u32 sessreqintmsk	: 1,
-		__BITFIELD_FIELD(u32 disconnintmsk	: 1,
-		__BITFIELD_FIELD(u32 conidstschngmsk	: 1,
-		__BITFIELD_FIELD(u32 reserved_27_27	: 1,
-		__BITFIELD_FIELD(u32 ptxfempmsk		: 1,
-		__BITFIELD_FIELD(u32 hchintmsk		: 1,
-		__BITFIELD_FIELD(u32 prtintmsk		: 1,
-		__BITFIELD_FIELD(u32 reserved_23_23	: 1,
-		__BITFIELD_FIELD(u32 fetsuspmsk		: 1,
-		__BITFIELD_FIELD(u32 incomplpmsk	: 1,
-		__BITFIELD_FIELD(u32 incompisoinmsk	: 1,
-		__BITFIELD_FIELD(u32 oepintmsk		: 1,
-		__BITFIELD_FIELD(u32 inepintmsk		: 1,
-		__BITFIELD_FIELD(u32 epmismsk		: 1,
-		__BITFIELD_FIELD(u32 reserved_16_16	: 1,
-		__BITFIELD_FIELD(u32 eopfmsk		: 1,
-		__BITFIELD_FIELD(u32 isooutdropmsk	: 1,
-		__BITFIELD_FIELD(u32 enumdonemsk	: 1,
-		__BITFIELD_FIELD(u32 usbrstmsk		: 1,
-		__BITFIELD_FIELD(u32 usbsuspmsk		: 1,
-		__BITFIELD_FIELD(u32 erlysuspmsk	: 1,
-		__BITFIELD_FIELD(u32 i2cint		: 1,
-		__BITFIELD_FIELD(u32 ulpickintmsk	: 1,
-		__BITFIELD_FIELD(u32 goutnakeffmsk	: 1,
-		__BITFIELD_FIELD(u32 ginnakeffmsk	: 1,
-		__BITFIELD_FIELD(u32 nptxfempmsk	: 1,
-		__BITFIELD_FIELD(u32 rxflvlmsk		: 1,
-		__BITFIELD_FIELD(u32 sofmsk		: 1,
-		__BITFIELD_FIELD(u32 otgintmsk		: 1,
-		__BITFIELD_FIELD(u32 modemismsk		: 1,
-		__BITFIELD_FIELD(u32 reserved_0_0	: 1,
-		;))))))))))))))))))))))))))))))))
-	} s;
-};
-
-/**
- * cvmx_usbc#_gintsts
- *
- * Core Interrupt Register (GINTSTS)
- *
- * This register interrupts the application for system-level events in the
- * current mode of operation (Device mode or Host mode). It is shown in
- * Interrupt. Some of the bits in this register are valid only in Host mode,
- * while others are valid in Device mode only. This register also indicates the
- * current mode of operation. In order to clear the interrupt status bits of
- * type R_SS_WC, the application must write 1'b1 into the bit. The FIFO status
- * interrupts are read only; once software reads from or writes to the FIFO
- * while servicing these interrupts, FIFO interrupt conditions are cleared
- * automatically.
- */
-union cvmx_usbcx_gintsts {
-	u32 u32;
-	/**
-	 * struct cvmx_usbcx_gintsts_s
-	 * @wkupint: Resume/Remote Wakeup Detected Interrupt (WkUpInt)
-	 *	In Device mode, this interrupt is asserted when a resume is
-	 *	detected on the USB. In Host mode, this interrupt is asserted
-	 *	when a remote wakeup is detected on the USB.
-	 *	For more information on how to use this interrupt, see "Partial
-	 *	Power-Down and Clock Gating Programming Model" on
-	 *	page 353.
-	 * @sessreqint: Session Request/New Session Detected Interrupt
-	 *		(SessReqInt)
-	 *	In Host mode, this interrupt is asserted when a session request
-	 *	is detected from the device. In Device mode, this interrupt is
-	 *	asserted when the utmiotg_bvalid signal goes high.
-	 *	For more information on how to use this interrupt, see "Partial
-	 *	Power-Down and Clock Gating Programming Model" on
-	 *	page 353.
-	 * @disconnint: Disconnect Detected Interrupt (DisconnInt)
-	 *	Asserted when a device disconnect is detected.
-	 * @conidstschng: Connector ID Status Change (ConIDStsChng)
-	 *	The core sets this bit when there is a change in connector ID
-	 *	status.
-	 * @ptxfemp: Periodic TxFIFO Empty (PTxFEmp)
-	 *	Asserted when the Periodic Transmit FIFO is either half or
-	 *	completely empty and there is space for at least one entry to be
-	 *	written in the Periodic Request Queue. The half or completely
-	 *	empty status is determined by the Periodic TxFIFO Empty Level
-	 *	bit in the Core AHB Configuration register
-	 *	(GAHBCFG.PTxFEmpLvl).
-	 * @hchint: Host Channels Interrupt (HChInt)
-	 *	The core sets this bit to indicate that an interrupt is pending
-	 *	on one of the channels of the core (in Host mode). The
-	 *	application must read the Host All Channels Interrupt (HAINT)
-	 *	register to determine the exact number of the channel on which
-	 *	the interrupt occurred, and then read the corresponding Host
-	 *	Channel-n Interrupt (HCINTn) register to determine the exact
-	 *	cause of the interrupt. The application must clear the
-	 *	appropriate status bit in the HCINTn register to clear this bit.
-	 * @prtint: Host Port Interrupt (PrtInt)
-	 *	The core sets this bit to indicate a change in port status of
-	 *	one of the O2P USB core ports in Host mode. The application must
-	 *	read the Host Port Control and Status (HPRT) register to
-	 *	determine the exact event that caused this interrupt. The
-	 *	application must clear the appropriate status bit in the Host
-	 *	Port Control and Status register to clear this bit.
-	 * @fetsusp: Data Fetch Suspended (FetSusp)
-	 *	This interrupt is valid only in DMA mode. This interrupt
-	 *	indicates that the core has stopped fetching data for IN
-	 *	endpoints due to the unavailability of TxFIFO space or Request
-	 *	Queue space. This interrupt is used by the application for an
-	 *	endpoint mismatch algorithm.
-	 * @incomplp: Incomplete Periodic Transfer (incomplP)
-	 *	In Host mode, the core sets this interrupt bit when there are
-	 *	incomplete periodic transactions still pending which are
-	 *	scheduled for the current microframe.
-	 *	Incomplete Isochronous OUT Transfer (incompISOOUT)
-	 *	The Device mode, the core sets this interrupt to indicate that
-	 *	there is at least one isochronous OUT endpoint on which the
-	 *	transfer is not completed in the current microframe. This
-	 *	interrupt is asserted along with the End of Periodic Frame
-	 *	Interrupt (EOPF) bit in this register.
-	 * @incompisoin: Incomplete Isochronous IN Transfer (incompISOIN)
-	 *	The core sets this interrupt to indicate that there is at least
-	 *	one isochronous IN endpoint on which the transfer is not
-	 *	completed in the current microframe. This interrupt is asserted
-	 *	along with the End of Periodic Frame Interrupt (EOPF) bit in
-	 *	this register.
-	 * @oepint: OUT Endpoints Interrupt (OEPInt)
-	 *	The core sets this bit to indicate that an interrupt is pending
-	 *	on one of the OUT endpoints of the core (in Device mode). The
-	 *	application must read the Device All Endpoints Interrupt
-	 *	(DAINT) register to determine the exact number of the OUT
-	 *	endpoint on which the interrupt occurred, and then read the
-	 *	corresponding Device OUT Endpoint-n Interrupt (DOEPINTn)
-	 *	register to determine the exact cause of the interrupt. The
-	 *	application must clear the appropriate status bit in the
-	 *	corresponding DOEPINTn register to clear this bit.
-	 * @iepint: IN Endpoints Interrupt (IEPInt)
-	 *	The core sets this bit to indicate that an interrupt is pending
-	 *	on one of the IN endpoints of the core (in Device mode). The
-	 *	application must read the Device All Endpoints Interrupt
-	 *	(DAINT) register to determine the exact number of the IN
-	 *	endpoint on which the interrupt occurred, and then read the
-	 *	corresponding Device IN Endpoint-n Interrupt (DIEPINTn)
-	 *	register to determine the exact cause of the interrupt. The
-	 *	application must clear the appropriate status bit in the
-	 *	corresponding DIEPINTn register to clear this bit.
-	 * @epmis: Endpoint Mismatch Interrupt (EPMis)
-	 *	Indicates that an IN token has been received for a non-periodic
-	 *	endpoint, but the data for another endpoint is present in the
-	 *	top of the Non-Periodic Transmit FIFO and the IN endpoint
-	 *	mismatch count programmed by the application has expired.
-	 * @eopf: End of Periodic Frame Interrupt (EOPF)
-	 *	Indicates that the period specified in the Periodic Frame
-	 *	Interval field of the Device Configuration register
-	 *	(DCFG.PerFrInt) has been reached in the current microframe.
-	 * @isooutdrop: Isochronous OUT Packet Dropped Interrupt (ISOOutDrop)
-	 *	The core sets this bit when it fails to write an isochronous OUT
-	 *	packet into the RxFIFO because the RxFIFO doesn't have
-	 *	enough space to accommodate a maximum packet size packet
-	 *	for the isochronous OUT endpoint.
-	 * @enumdone: Enumeration Done (EnumDone)
-	 *	The core sets this bit to indicate that speed enumeration is
-	 *	complete. The application must read the Device Status (DSTS)
-	 *	register to obtain the enumerated speed.
-	 * @usbrst: USB Reset (USBRst)
-	 *	The core sets this bit to indicate that a reset is detected on
-	 *	the USB.
-	 * @usbsusp: USB Suspend (USBSusp)
-	 *	The core sets this bit to indicate that a suspend was detected
-	 *	on the USB. The core enters the Suspended state when there
-	 *	is no activity on the phy_line_state_i signal for an extended
-	 *	period of time.
-	 * @erlysusp: Early Suspend (ErlySusp)
-	 *	The core sets this bit to indicate that an Idle state has been
-	 *	detected on the USB for 3 ms.
-	 * @i2cint: I2C Interrupt (I2CINT)
-	 *	This bit is always 0x0.
-	 * @ulpickint: ULPI Carkit Interrupt (ULPICKINT)
-	 *	This bit is always 0x0.
-	 * @goutnakeff: Global OUT NAK Effective (GOUTNakEff)
-	 *	Indicates that the Set Global OUT NAK bit in the Device Control
-	 *	register (DCTL.SGOUTNak), set by the application, has taken
-	 *	effect in the core. This bit can be cleared by writing the Clear
-	 *	Global OUT NAK bit in the Device Control register
-	 *	(DCTL.CGOUTNak).
-	 * @ginnakeff: Global IN Non-Periodic NAK Effective (GINNakEff)
-	 *	Indicates that the Set Global Non-Periodic IN NAK bit in the
-	 *	Device Control register (DCTL.SGNPInNak), set by the
-	 *	application, has taken effect in the core. That is, the core has
-	 *	sampled the Global IN NAK bit set by the application. This bit
-	 *	can be cleared by clearing the Clear Global Non-Periodic IN
-	 *	NAK bit in the Device Control register (DCTL.CGNPInNak).
-	 *	This interrupt does not necessarily mean that a NAK handshake
-	 *	is sent out on the USB. The STALL bit takes precedence over
-	 *	the NAK bit.
-	 * @nptxfemp: Non-Periodic TxFIFO Empty (NPTxFEmp)
-	 *	This interrupt is asserted when the Non-Periodic TxFIFO is
-	 *	either half or completely empty, and there is space for at least
-	 *	one entry to be written to the Non-Periodic Transmit Request
-	 *	Queue. The half or completely empty status is determined by
-	 *	the Non-Periodic TxFIFO Empty Level bit in the Core AHB
-	 *	Configuration register (GAHBCFG.NPTxFEmpLvl).
-	 * @rxflvl: RxFIFO Non-Empty (RxFLvl)
-	 *	Indicates that there is at least one packet pending to be read
-	 *	from the RxFIFO.
-	 * @sof: Start of (micro)Frame (Sof)
-	 *	In Host mode, the core sets this bit to indicate that an SOF
-	 *	(FS), micro-SOF (HS), or Keep-Alive (LS) is transmitted on the
-	 *	USB. The application must write a 1 to this bit to clear the
-	 *	interrupt.
-	 *	In Device mode, in the core sets this bit to indicate that an
-	 *	SOF token has been received on the USB. The application can read
-	 *	the Device Status register to get the current (micro)frame
-	 *	number. This interrupt is seen only when the core is operating
-	 *	at either HS or FS.
-	 * @otgint: OTG Interrupt (OTGInt)
-	 *	The core sets this bit to indicate an OTG protocol event. The
-	 *	application must read the OTG Interrupt Status (GOTGINT)
-	 *	register to determine the exact event that caused this
-	 *	interrupt. The application must clear the appropriate status bit
-	 *	in the GOTGINT register to clear this bit.
-	 * @modemis: Mode Mismatch Interrupt (ModeMis)
-	 *	The core sets this bit when the application is trying to access:
-	 *	* A Host mode register, when the core is operating in Device
-	 *	mode
-	 *	* A Device mode register, when the core is operating in Host
-	 *	mode
-	 *	The register access is completed on the AHB with an OKAY
-	 *	response, but is ignored by the core internally and doesn't
-	 *	affect the operation of the core.
-	 * @curmod: Current Mode of Operation (CurMod)
-	 *	Indicates the current mode of operation.
-	 *	* 1'b0: Device mode
-	 *	* 1'b1: Host mode
-	 */
-	struct cvmx_usbcx_gintsts_s {
-		__BITFIELD_FIELD(u32 wkupint		: 1,
-		__BITFIELD_FIELD(u32 sessreqint		: 1,
-		__BITFIELD_FIELD(u32 disconnint		: 1,
-		__BITFIELD_FIELD(u32 conidstschng	: 1,
-		__BITFIELD_FIELD(u32 reserved_27_27	: 1,
-		__BITFIELD_FIELD(u32 ptxfemp		: 1,
-		__BITFIELD_FIELD(u32 hchint		: 1,
-		__BITFIELD_FIELD(u32 prtint		: 1,
-		__BITFIELD_FIELD(u32 reserved_23_23	: 1,
-		__BITFIELD_FIELD(u32 fetsusp		: 1,
-		__BITFIELD_FIELD(u32 incomplp		: 1,
-		__BITFIELD_FIELD(u32 incompisoin	: 1,
-		__BITFIELD_FIELD(u32 oepint		: 1,
-		__BITFIELD_FIELD(u32 iepint		: 1,
-		__BITFIELD_FIELD(u32 epmis		: 1,
-		__BITFIELD_FIELD(u32 reserved_16_16	: 1,
-		__BITFIELD_FIELD(u32 eopf		: 1,
-		__BITFIELD_FIELD(u32 isooutdrop		: 1,
-		__BITFIELD_FIELD(u32 enumdone		: 1,
-		__BITFIELD_FIELD(u32 usbrst		: 1,
-		__BITFIELD_FIELD(u32 usbsusp		: 1,
-		__BITFIELD_FIELD(u32 erlysusp		: 1,
-		__BITFIELD_FIELD(u32 i2cint		: 1,
-		__BITFIELD_FIELD(u32 ulpickint		: 1,
-		__BITFIELD_FIELD(u32 goutnakeff		: 1,
-		__BITFIELD_FIELD(u32 ginnakeff		: 1,
-		__BITFIELD_FIELD(u32 nptxfemp		: 1,
-		__BITFIELD_FIELD(u32 rxflvl		: 1,
-		__BITFIELD_FIELD(u32 sof		: 1,
-		__BITFIELD_FIELD(u32 otgint		: 1,
-		__BITFIELD_FIELD(u32 modemis		: 1,
-		__BITFIELD_FIELD(u32 curmod		: 1,
-		;))))))))))))))))))))))))))))))))
-	} s;
-};
-
-/**
- * cvmx_usbc#_gnptxfsiz
- *
- * Non-Periodic Transmit FIFO Size Register (GNPTXFSIZ)
- *
- * The application can program the RAM size and the memory start address for the
- * Non-Periodic TxFIFO.
- */
-union cvmx_usbcx_gnptxfsiz {
-	u32 u32;
-	/**
-	 * struct cvmx_usbcx_gnptxfsiz_s
-	 * @nptxfdep: Non-Periodic TxFIFO Depth (NPTxFDep)
-	 *	This value is in terms of 32-bit words.
-	 *	Minimum value is 16
-	 *	Maximum value is 32768
-	 * @nptxfstaddr: Non-Periodic Transmit RAM Start Address (NPTxFStAddr)
-	 *	This field contains the memory start address for Non-Periodic
-	 *	Transmit FIFO RAM.
-	 */
-	struct cvmx_usbcx_gnptxfsiz_s {
-		__BITFIELD_FIELD(u32 nptxfdep		: 16,
-		__BITFIELD_FIELD(u32 nptxfstaddr	: 16,
-		;))
-	} s;
-};
-
-/**
- * cvmx_usbc#_gnptxsts
- *
- * Non-Periodic Transmit FIFO/Queue Status Register (GNPTXSTS)
- *
- * This read-only register contains the free space information for the
- * Non-Periodic TxFIFO and the Non-Periodic Transmit Request Queue.
- */
-union cvmx_usbcx_gnptxsts {
-	u32 u32;
-	/**
-	 * struct cvmx_usbcx_gnptxsts_s
-	 * @nptxqtop: Top of the Non-Periodic Transmit Request Queue (NPTxQTop)
-	 *	Entry in the Non-Periodic Tx Request Queue that is currently
-	 *	being processed by the MAC.
-	 *	* Bits [30:27]: Channel/endpoint number
-	 *	* Bits [26:25]:
-	 *	- 2'b00: IN/OUT token
-	 *	- 2'b01: Zero-length transmit packet (device IN/host OUT)
-	 *	- 2'b10: PING/CSPLIT token
-	 *	- 2'b11: Channel halt command
-	 *	* Bit [24]: Terminate (last entry for selected channel/endpoint)
-	 * @nptxqspcavail: Non-Periodic Transmit Request Queue Space Available
-	 *	(NPTxQSpcAvail)
-	 *	Indicates the amount of free space available in the Non-
-	 *	Periodic Transmit Request Queue. This queue holds both IN
-	 *	and OUT requests in Host mode. Device mode has only IN
-	 *	requests.
-	 *	* 8'h0: Non-Periodic Transmit Request Queue is full
-	 *	* 8'h1: 1 location available
-	 *	* 8'h2: 2 locations available
-	 *	* n: n locations available (0..8)
-	 *	* Others: Reserved
-	 * @nptxfspcavail: Non-Periodic TxFIFO Space Avail (NPTxFSpcAvail)
-	 *	Indicates the amount of free space available in the Non-
-	 *	Periodic TxFIFO.
-	 *	Values are in terms of 32-bit words.
-	 *	* 16'h0: Non-Periodic TxFIFO is full
-	 *	* 16'h1: 1 word available
-	 *	* 16'h2: 2 words available
-	 *	* 16'hn: n words available (where 0..32768)
-	 *	* 16'h8000: 32768 words available
-	 *	* Others: Reserved
-	 */
-	struct cvmx_usbcx_gnptxsts_s {
-		__BITFIELD_FIELD(u32 reserved_31_31	: 1,
-		__BITFIELD_FIELD(u32 nptxqtop		: 7,
-		__BITFIELD_FIELD(u32 nptxqspcavail	: 8,
-		__BITFIELD_FIELD(u32 nptxfspcavail	: 16,
-		;))))
-	} s;
-};
-
-/**
- * cvmx_usbc#_grstctl
- *
- * Core Reset Register (GRSTCTL)
- *
- * The application uses this register to reset various hardware features inside
- * the core.
- */
-union cvmx_usbcx_grstctl {
-	u32 u32;
-	/**
-	 * struct cvmx_usbcx_grstctl_s
-	 * @ahbidle: AHB Master Idle (AHBIdle)
-	 *	Indicates that the AHB Master State Machine is in the IDLE
-	 *	condition.
-	 * @dmareq: DMA Request Signal (DMAReq)
-	 *	Indicates that the DMA request is in progress. Used for debug.
-	 * @txfnum: TxFIFO Number (TxFNum)
-	 *	This is the FIFO number that must be flushed using the TxFIFO
-	 *	Flush bit. This field must not be changed until the core clears
-	 *	the TxFIFO Flush bit.
-	 *	* 5'h0: Non-Periodic TxFIFO flush
-	 *	* 5'h1: Periodic TxFIFO 1 flush in Device mode or Periodic
-	 *	TxFIFO flush in Host mode
-	 *	* 5'h2: Periodic TxFIFO 2 flush in Device mode
-	 *	- ...
-	 *	* 5'hF: Periodic TxFIFO 15 flush in Device mode
-	 *	* 5'h10: Flush all the Periodic and Non-Periodic TxFIFOs in the
-	 *	core
-	 * @txfflsh: TxFIFO Flush (TxFFlsh)
-	 *	This bit selectively flushes a single or all transmit FIFOs, but
-	 *	cannot do so if the core is in the midst of a transaction.
-	 *	The application must only write this bit after checking that the
-	 *	core is neither writing to the TxFIFO nor reading from the
-	 *	TxFIFO.
-	 *	The application must wait until the core clears this bit before
-	 *	performing any operations. This bit takes 8 clocks (of phy_clk
-	 *	or hclk, whichever is slower) to clear.
-	 * @rxfflsh: RxFIFO Flush (RxFFlsh)
-	 *	The application can flush the entire RxFIFO using this bit, but
-	 *	must first ensure that the core is not in the middle of a
-	 *	transaction.
-	 *	The application must only write to this bit after checking that
-	 *	the core is neither reading from the RxFIFO nor writing to the
-	 *	RxFIFO.
-	 *	The application must wait until the bit is cleared before
-	 *	performing any other operations. This bit will take 8 clocks
-	 *	(slowest of PHY or AHB clock) to clear.
-	 * @intknqflsh: IN Token Sequence Learning Queue Flush (INTknQFlsh)
-	 *	The application writes this bit to flush the IN Token Sequence
-	 *	Learning Queue.
-	 * @frmcntrrst: Host Frame Counter Reset (FrmCntrRst)
-	 *	The application writes this bit to reset the (micro)frame number
-	 *	counter inside the core. When the (micro)frame counter is reset,
-	 *	the subsequent SOF sent out by the core will have a
-	 *	(micro)frame number of 0.
-	 * @hsftrst: HClk Soft Reset (HSftRst)
-	 *	The application uses this bit to flush the control logic in the
-	 *	AHB Clock domain. Only AHB Clock Domain pipelines are reset.
-	 *	* FIFOs are not flushed with this bit.
-	 *	* All state machines in the AHB clock domain are reset to the
-	 *	Idle state after terminating the transactions on the AHB,
-	 *	following the protocol.
-	 *	* CSR control bits used by the AHB clock domain state
-	 *	machines are cleared.
-	 *	* To clear this interrupt, status mask bits that control the
-	 *	interrupt status and are generated by the AHB clock domain
-	 *	state machine are cleared.
-	 *	* Because interrupt status bits are not cleared, the application
-	 *	can get the status of any core events that occurred after it set
-	 *	this bit.
-	 *	This is a self-clearing bit that the core clears after all
-	 *	necessary logic is reset in the core. This may take several
-	 *	clocks, depending on the core's current state.
-	 * @csftrst: Core Soft Reset (CSftRst)
-	 *	Resets the hclk and phy_clock domains as follows:
-	 *	* Clears the interrupts and all the CSR registers except the
-	 *	following register bits:
-	 *	- PCGCCTL.RstPdwnModule
-	 *	- PCGCCTL.GateHclk
-	 *	- PCGCCTL.PwrClmp
-	 *	- PCGCCTL.StopPPhyLPwrClkSelclk
-	 *	- GUSBCFG.PhyLPwrClkSel
-	 *	- GUSBCFG.DDRSel
-	 *	- GUSBCFG.PHYSel
-	 *	- GUSBCFG.FSIntf
-	 *	- GUSBCFG.ULPI_UTMI_Sel
-	 *	- GUSBCFG.PHYIf
-	 *	- HCFG.FSLSPclkSel
-	 *	- DCFG.DevSpd
-	 *	* All module state machines (except the AHB Slave Unit) are
-	 *	reset to the IDLE state, and all the transmit FIFOs and the
-	 *	receive FIFO are flushed.
-	 *	* Any transactions on the AHB Master are terminated as soon
-	 *	as possible, after gracefully completing the last data phase of
-	 *	an AHB transfer. Any transactions on the USB are terminated
-	 *	immediately.
-	 *	The application can write to this bit any time it wants to reset
-	 *	the core. This is a self-clearing bit and the core clears this
-	 *	bit after all the necessary logic is reset in the core, which
-	 *	may take several clocks, depending on the current state of the
-	 *	core. Once this bit is cleared software should wait at least 3
-	 *	PHY clocks before doing any access to the PHY domain
-	 *	(synchronization delay). Software should also should check that
-	 *	bit 31 of this register is 1 (AHB Master is IDLE) before
-	 *	starting any operation.
-	 *	Typically software reset is used during software development
-	 *	and also when you dynamically change the PHY selection bits
-	 *	in the USB configuration registers listed above. When you
-	 *	change the PHY, the corresponding clock for the PHY is
-	 *	selected and used in the PHY domain. Once a new clock is
-	 *	selected, the PHY domain has to be reset for proper operation.
-	 */
-	struct cvmx_usbcx_grstctl_s {
-		__BITFIELD_FIELD(u32 ahbidle		: 1,
-		__BITFIELD_FIELD(u32 dmareq		: 1,
-		__BITFIELD_FIELD(u32 reserved_11_29	: 19,
-		__BITFIELD_FIELD(u32 txfnum		: 5,
-		__BITFIELD_FIELD(u32 txfflsh		: 1,
-		__BITFIELD_FIELD(u32 rxfflsh		: 1,
-		__BITFIELD_FIELD(u32 intknqflsh		: 1,
-		__BITFIELD_FIELD(u32 frmcntrrst		: 1,
-		__BITFIELD_FIELD(u32 hsftrst		: 1,
-		__BITFIELD_FIELD(u32 csftrst		: 1,
-		;))))))))))
-	} s;
-};
-
-/**
- * cvmx_usbc#_grxfsiz
- *
- * Receive FIFO Size Register (GRXFSIZ)
- *
- * The application can program the RAM size that must be allocated to the
- * RxFIFO.
- */
-union cvmx_usbcx_grxfsiz {
-	u32 u32;
-	/**
-	 * struct cvmx_usbcx_grxfsiz_s
-	 * @rxfdep: RxFIFO Depth (RxFDep)
-	 *	This value is in terms of 32-bit words.
-	 *	* Minimum value is 16
-	 *	* Maximum value is 32768
-	 */
-	struct cvmx_usbcx_grxfsiz_s {
-		__BITFIELD_FIELD(u32 reserved_16_31	: 16,
-		__BITFIELD_FIELD(u32 rxfdep		: 16,
-		;))
-	} s;
-};
-
-/**
- * cvmx_usbc#_grxstsph
- *
- * Receive Status Read and Pop Register, Host Mode (GRXSTSPH)
- *
- * A read to the Receive Status Read and Pop register returns and additionally
- * pops the top data entry out of the RxFIFO.
- * This Description is only valid when the core is in Host Mode. For Device Mode
- * use USBC_GRXSTSPD instead.
- * NOTE: GRXSTSPH and GRXSTSPD are physically the same register and share the
- *	 same offset in the O2P USB core. The offset difference shown in this
- *	 document is for software clarity and is actually ignored by the
- *       hardware.
- */
-union cvmx_usbcx_grxstsph {
-	u32 u32;
-	/**
-	 * struct cvmx_usbcx_grxstsph_s
-	 * @pktsts: Packet Status (PktSts)
-	 *	Indicates the status of the received packet
-	 *	* 4'b0010: IN data packet received
-	 *	* 4'b0011: IN transfer completed (triggers an interrupt)
-	 *	* 4'b0101: Data toggle error (triggers an interrupt)
-	 *	* 4'b0111: Channel halted (triggers an interrupt)
-	 *	* Others: Reserved
-	 * @dpid: Data PID (DPID)
-	 *	* 2'b00: DATA0
-	 *	* 2'b10: DATA1
-	 *	* 2'b01: DATA2
-	 *	* 2'b11: MDATA
-	 * @bcnt: Byte Count (BCnt)
-	 *	Indicates the byte count of the received IN data packet
-	 * @chnum: Channel Number (ChNum)
-	 *	Indicates the channel number to which the current received
-	 *	packet belongs.
-	 */
-	struct cvmx_usbcx_grxstsph_s {
-		__BITFIELD_FIELD(u32 reserved_21_31	: 11,
-		__BITFIELD_FIELD(u32 pktsts		: 4,
-		__BITFIELD_FIELD(u32 dpid		: 2,
-		__BITFIELD_FIELD(u32 bcnt		: 11,
-		__BITFIELD_FIELD(u32 chnum		: 4,
-		;)))))
-	} s;
-};
-
-/**
- * cvmx_usbc#_gusbcfg
- *
- * Core USB Configuration Register (GUSBCFG)
- *
- * This register can be used to configure the core after power-on or a changing
- * to Host mode or Device mode. It contains USB and USB-PHY related
- * configuration parameters. The application must program this register before
- * starting any transactions on either the AHB or the USB. Do not make changes
- * to this register after the initial programming.
- */
-union cvmx_usbcx_gusbcfg {
-	u32 u32;
-	/**
-	 * struct cvmx_usbcx_gusbcfg_s
-	 * @otgi2csel: UTMIFS or I2C Interface Select (OtgI2CSel)
-	 *	This bit is always 0x0.
-	 * @phylpwrclksel: PHY Low-Power Clock Select (PhyLPwrClkSel)
-	 *	Software should set this bit to 0x0.
-	 *	Selects either 480-MHz or 48-MHz (low-power) PHY mode. In
-	 *	FS and LS modes, the PHY can usually operate on a 48-MHz
-	 *	clock to save power.
-	 *	* 1'b0: 480-MHz Internal PLL clock
-	 *	* 1'b1: 48-MHz External Clock
-	 *	In 480 MHz mode, the UTMI interface operates at either 60 or
-	 *	30-MHz, depending upon whether 8- or 16-bit data width is
-	 *	selected. In 48-MHz mode, the UTMI interface operates at 48
-	 *	MHz in FS mode and at either 48 or 6 MHz in LS mode
-	 *	(depending on the PHY vendor).
-	 *	This bit drives the utmi_fsls_low_power core output signal, and
-	 *	is valid only for UTMI+ PHYs.
-	 * @usbtrdtim: USB Turnaround Time (USBTrdTim)
-	 *	Sets the turnaround time in PHY clocks.
-	 *	Specifies the response time for a MAC request to the Packet
-	 *	FIFO Controller (PFC) to fetch data from the DFIFO (SPRAM).
-	 *	This must be programmed to 0x5.
-	 * @hnpcap: HNP-Capable (HNPCap)
-	 *	This bit is always 0x0.
-	 * @srpcap: SRP-Capable (SRPCap)
-	 *	This bit is always 0x0.
-	 * @ddrsel: ULPI DDR Select (DDRSel)
-	 *	Software should set this bit to 0x0.
-	 * @physel: USB 2.0 High-Speed PHY or USB 1.1 Full-Speed Serial
-	 *	Software should set this bit to 0x0.
-	 * @fsintf: Full-Speed Serial Interface Select (FSIntf)
-	 *	Software should set this bit to 0x0.
-	 * @ulpi_utmi_sel: ULPI or UTMI+ Select (ULPI_UTMI_Sel)
-	 *	This bit is always 0x0.
-	 * @phyif: PHY Interface (PHYIf)
-	 *	This bit is always 0x1.
-	 * @toutcal: HS/FS Timeout Calibration (TOutCal)
-	 *	The number of PHY clocks that the application programs in this
-	 *	field is added to the high-speed/full-speed interpacket timeout
-	 *	duration in the core to account for any additional delays
-	 *	introduced by the PHY. This may be required, since the delay
-	 *	introduced by the PHY in generating the linestate condition may
-	 *	vary from one PHY to another.
-	 *	The USB standard timeout value for high-speed operation is
-	 *	736 to 816 (inclusive) bit times. The USB standard timeout
-	 *	value for full-speed operation is 16 to 18 (inclusive) bit
-	 *	times. The application must program this field based on the
-	 *	speed of enumeration. The number of bit times added per PHY
-	 *	clock are:
-	 *	High-speed operation:
-	 *	* One 30-MHz PHY clock = 16 bit times
-	 *	* One 60-MHz PHY clock = 8 bit times
-	 *	Full-speed operation:
-	 *	* One 30-MHz PHY clock = 0.4 bit times
-	 *	* One 60-MHz PHY clock = 0.2 bit times
-	 *	* One 48-MHz PHY clock = 0.25 bit times
-	 */
-	struct cvmx_usbcx_gusbcfg_s {
-		__BITFIELD_FIELD(u32 reserved_17_31	: 15,
-		__BITFIELD_FIELD(u32 otgi2csel		: 1,
-		__BITFIELD_FIELD(u32 phylpwrclksel	: 1,
-		__BITFIELD_FIELD(u32 reserved_14_14	: 1,
-		__BITFIELD_FIELD(u32 usbtrdtim		: 4,
-		__BITFIELD_FIELD(u32 hnpcap		: 1,
-		__BITFIELD_FIELD(u32 srpcap		: 1,
-		__BITFIELD_FIELD(u32 ddrsel		: 1,
-		__BITFIELD_FIELD(u32 physel		: 1,
-		__BITFIELD_FIELD(u32 fsintf		: 1,
-		__BITFIELD_FIELD(u32 ulpi_utmi_sel	: 1,
-		__BITFIELD_FIELD(u32 phyif		: 1,
-		__BITFIELD_FIELD(u32 toutcal		: 3,
-		;)))))))))))))
-	} s;
-};
-
-/**
- * cvmx_usbc#_haint
- *
- * Host All Channels Interrupt Register (HAINT)
- *
- * When a significant event occurs on a channel, the Host All Channels Interrupt
- * register interrupts the application using the Host Channels Interrupt bit of
- * the Core Interrupt register (GINTSTS.HChInt). This is shown in Interrupt.
- * There is one interrupt bit per channel, up to a maximum of 16 bits. Bits in
- * this register are set and cleared when the application sets and clears bits
- * in the corresponding Host Channel-n Interrupt register.
- */
-union cvmx_usbcx_haint {
-	u32 u32;
-	/**
-	 * struct cvmx_usbcx_haint_s
-	 * @haint: Channel Interrupts (HAINT)
-	 *	One bit per channel: Bit 0 for Channel 0, bit 15 for Channel 15
-	 */
-	struct cvmx_usbcx_haint_s {
-		__BITFIELD_FIELD(u32 reserved_16_31	: 16,
-		__BITFIELD_FIELD(u32 haint		: 16,
-		;))
-	} s;
-};
-
-/**
- * cvmx_usbc#_haintmsk
- *
- * Host All Channels Interrupt Mask Register (HAINTMSK)
- *
- * The Host All Channel Interrupt Mask register works with the Host All Channel
- * Interrupt register to interrupt the application when an event occurs on a
- * channel. There is one interrupt mask bit per channel, up to a maximum of 16
- * bits.
- * Mask interrupt: 1'b0 Unmask interrupt: 1'b1
- */
-union cvmx_usbcx_haintmsk {
-	u32 u32;
-	/**
-	 * struct cvmx_usbcx_haintmsk_s
-	 * @haintmsk: Channel Interrupt Mask (HAINTMsk)
-	 *	One bit per channel: Bit 0 for channel 0, bit 15 for channel 15
-	 */
-	struct cvmx_usbcx_haintmsk_s {
-		__BITFIELD_FIELD(u32 reserved_16_31	: 16,
-		__BITFIELD_FIELD(u32 haintmsk		: 16,
-		;))
-	} s;
-};
-
-/**
- * cvmx_usbc#_hcchar#
- *
- * Host Channel-n Characteristics Register (HCCHAR)
- *
- */
-union cvmx_usbcx_hccharx {
-	u32 u32;
-	/**
-	 * struct cvmx_usbcx_hccharx_s
-	 * @chena: Channel Enable (ChEna)
-	 *	This field is set by the application and cleared by the OTG
-	 *	host.
-	 *	* 1'b0: Channel disabled
-	 *	* 1'b1: Channel enabled
-	 * @chdis: Channel Disable (ChDis)
-	 *	The application sets this bit to stop transmitting/receiving
-	 *	data on a channel, even before the transfer for that channel is
-	 *	complete. The application must wait for the Channel Disabled
-	 *	interrupt before treating the channel as disabled.
-	 * @oddfrm: Odd Frame (OddFrm)
-	 *	This field is set (reset) by the application to indicate that
-	 *	the OTG host must perform a transfer in an odd (micro)frame.
-	 *	This field is applicable for only periodic (isochronous and
-	 *	interrupt) transactions.
-	 *	* 1'b0: Even (micro)frame
-	 *	* 1'b1: Odd (micro)frame
-	 * @devaddr: Device Address (DevAddr)
-	 *	This field selects the specific device serving as the data
-	 *	source or sink.
-	 * @ec: Multi Count (MC) / Error Count (EC)
-	 *	When the Split Enable bit of the Host Channel-n Split Control
-	 *	register (HCSPLTn.SpltEna) is reset (1'b0), this field indicates
-	 *	to the host the number of transactions that should be executed
-	 *	per microframe for this endpoint.
-	 *	* 2'b00: Reserved. This field yields undefined results.
-	 *	* 2'b01: 1 transaction
-	 *	* 2'b10: 2 transactions to be issued for this endpoint per
-	 *	microframe
-	 *	* 2'b11: 3 transactions to be issued for this endpoint per
-	 *	microframe
-	 *	When HCSPLTn.SpltEna is set (1'b1), this field indicates the
-	 *	number of immediate retries to be performed for a periodic split
-	 *	transactions on transaction errors. This field must be set to at
-	 *	least 2'b01.
-	 * @eptype: Endpoint Type (EPType)
-	 *	Indicates the transfer type selected.
-	 *	* 2'b00: Control
-	 *	* 2'b01: Isochronous
-	 *	* 2'b10: Bulk
-	 *	* 2'b11: Interrupt
-	 * @lspddev: Low-Speed Device (LSpdDev)
-	 *	This field is set by the application to indicate that this
-	 *	channel is communicating to a low-speed device.
-	 * @epdir: Endpoint Direction (EPDir)
-	 *	Indicates whether the transaction is IN or OUT.
-	 *	* 1'b0: OUT
-	 *	* 1'b1: IN
-	 * @epnum: Endpoint Number (EPNum)
-	 *	Indicates the endpoint number on the device serving as the
-	 *	data source or sink.
-	 * @mps: Maximum Packet Size (MPS)
-	 *	Indicates the maximum packet size of the associated endpoint.
-	 */
-	struct cvmx_usbcx_hccharx_s {
-		__BITFIELD_FIELD(u32 chena		: 1,
-		__BITFIELD_FIELD(u32 chdis		: 1,
-		__BITFIELD_FIELD(u32 oddfrm		: 1,
-		__BITFIELD_FIELD(u32 devaddr		: 7,
-		__BITFIELD_FIELD(u32 ec			: 2,
-		__BITFIELD_FIELD(u32 eptype		: 2,
-		__BITFIELD_FIELD(u32 lspddev		: 1,
-		__BITFIELD_FIELD(u32 reserved_16_16	: 1,
-		__BITFIELD_FIELD(u32 epdir		: 1,
-		__BITFIELD_FIELD(u32 epnum		: 4,
-		__BITFIELD_FIELD(u32 mps		: 11,
-		;)))))))))))
-	} s;
-};
-
-/**
- * cvmx_usbc#_hcfg
- *
- * Host Configuration Register (HCFG)
- *
- * This register configures the core after power-on. Do not make changes to this
- * register after initializing the host.
- */
-union cvmx_usbcx_hcfg {
-	u32 u32;
-	/**
-	 * struct cvmx_usbcx_hcfg_s
-	 * @fslssupp: FS- and LS-Only Support (FSLSSupp)
-	 *	The application uses this bit to control the core's enumeration
-	 *	speed. Using this bit, the application can make the core
-	 *	enumerate as a FS host, even if the connected device supports
-	 *	HS traffic. Do not make changes to this field after initial
-	 *	programming.
-	 *	* 1'b0: HS/FS/LS, based on the maximum speed supported by
-	 *	the connected device
-	 *	* 1'b1: FS/LS-only, even if the connected device can support HS
-	 * @fslspclksel: FS/LS PHY Clock Select (FSLSPclkSel)
-	 *	When the core is in FS Host mode
-	 *	* 2'b00: PHY clock is running at 30/60 MHz
-	 *	* 2'b01: PHY clock is running at 48 MHz
-	 *	* Others: Reserved
-	 *	When the core is in LS Host mode
-	 *	* 2'b00: PHY clock is running at 30/60 MHz. When the
-	 *	UTMI+/ULPI PHY Low Power mode is not selected, use
-	 *	30/60 MHz.
-	 *	* 2'b01: PHY clock is running at 48 MHz. When the UTMI+
-	 *	PHY Low Power mode is selected, use 48MHz if the PHY
-	 *	supplies a 48 MHz clock during LS mode.
-	 *	* 2'b10: PHY clock is running at 6 MHz. In USB 1.1 FS mode,
-	 *	use 6 MHz when the UTMI+ PHY Low Power mode is
-	 *	selected and the PHY supplies a 6 MHz clock during LS
-	 *	mode. If you select a 6 MHz clock during LS mode, you must
-	 *	do a soft reset.
-	 *	* 2'b11: Reserved
-	 */
-	struct cvmx_usbcx_hcfg_s {
-		__BITFIELD_FIELD(u32 reserved_3_31	: 29,
-		__BITFIELD_FIELD(u32 fslssupp		: 1,
-		__BITFIELD_FIELD(u32 fslspclksel	: 2,
-		;)))
-	} s;
-};
-
-/**
- * cvmx_usbc#_hcint#
- *
- * Host Channel-n Interrupt Register (HCINT)
- *
- * This register indicates the status of a channel with respect to USB- and
- * AHB-related events. The application must read this register when the Host
- * Channels Interrupt bit of the Core Interrupt register (GINTSTS.HChInt) is
- * set. Before the application can read this register, it must first read
- * the Host All Channels Interrupt (HAINT) register to get the exact channel
- * number for the Host Channel-n Interrupt register. The application must clear
- * the appropriate bit in this register to clear the corresponding bits in the
- * HAINT and GINTSTS registers.
- */
-union cvmx_usbcx_hcintx {
-	u32 u32;
-	/**
-	 * struct cvmx_usbcx_hcintx_s
-	 * @datatglerr: Data Toggle Error (DataTglErr)
-	 * @frmovrun: Frame Overrun (FrmOvrun)
-	 * @bblerr: Babble Error (BblErr)
-	 * @xacterr: Transaction Error (XactErr)
-	 * @nyet: NYET Response Received Interrupt (NYET)
-	 * @ack: ACK Response Received Interrupt (ACK)
-	 * @nak: NAK Response Received Interrupt (NAK)
-	 * @stall: STALL Response Received Interrupt (STALL)
-	 * @ahberr: This bit is always 0x0.
-	 * @chhltd: Channel Halted (ChHltd)
-	 *	Indicates the transfer completed abnormally either because of
-	 *	any USB transaction error or in response to disable request by
-	 *	the application.
-	 * @xfercompl: Transfer Completed (XferCompl)
-	 *	Transfer completed normally without any errors.
-	 */
-	struct cvmx_usbcx_hcintx_s {
-		__BITFIELD_FIELD(u32 reserved_11_31	: 21,
-		__BITFIELD_FIELD(u32 datatglerr		: 1,
-		__BITFIELD_FIELD(u32 frmovrun		: 1,
-		__BITFIELD_FIELD(u32 bblerr		: 1,
-		__BITFIELD_FIELD(u32 xacterr		: 1,
-		__BITFIELD_FIELD(u32 nyet		: 1,
-		__BITFIELD_FIELD(u32 ack		: 1,
-		__BITFIELD_FIELD(u32 nak		: 1,
-		__BITFIELD_FIELD(u32 stall		: 1,
-		__BITFIELD_FIELD(u32 ahberr		: 1,
-		__BITFIELD_FIELD(u32 chhltd		: 1,
-		__BITFIELD_FIELD(u32 xfercompl		: 1,
-		;))))))))))))
-	} s;
-};
-
-/**
- * cvmx_usbc#_hcintmsk#
- *
- * Host Channel-n Interrupt Mask Register (HCINTMSKn)
- *
- * This register reflects the mask for each channel status described in the
- * previous section.
- * Mask interrupt: 1'b0 Unmask interrupt: 1'b1
- */
-union cvmx_usbcx_hcintmskx {
-	u32 u32;
-	/**
-	 * struct cvmx_usbcx_hcintmskx_s
-	 * @datatglerrmsk: Data Toggle Error Mask (DataTglErrMsk)
-	 * @frmovrunmsk: Frame Overrun Mask (FrmOvrunMsk)
-	 * @bblerrmsk: Babble Error Mask (BblErrMsk)
-	 * @xacterrmsk: Transaction Error Mask (XactErrMsk)
-	 * @nyetmsk: NYET Response Received Interrupt Mask (NyetMsk)
-	 * @ackmsk: ACK Response Received Interrupt Mask (AckMsk)
-	 * @nakmsk: NAK Response Received Interrupt Mask (NakMsk)
-	 * @stallmsk: STALL Response Received Interrupt Mask (StallMsk)
-	 * @ahberrmsk: AHB Error Mask (AHBErrMsk)
-	 * @chhltdmsk: Channel Halted Mask (ChHltdMsk)
-	 * @xfercomplmsk: Transfer Completed Mask (XferComplMsk)
-	 */
-	struct cvmx_usbcx_hcintmskx_s {
-		__BITFIELD_FIELD(u32 reserved_11_31		: 21,
-		__BITFIELD_FIELD(u32 datatglerrmsk		: 1,
-		__BITFIELD_FIELD(u32 frmovrunmsk		: 1,
-		__BITFIELD_FIELD(u32 bblerrmsk			: 1,
-		__BITFIELD_FIELD(u32 xacterrmsk			: 1,
-		__BITFIELD_FIELD(u32 nyetmsk			: 1,
-		__BITFIELD_FIELD(u32 ackmsk			: 1,
-		__BITFIELD_FIELD(u32 nakmsk			: 1,
-		__BITFIELD_FIELD(u32 stallmsk			: 1,
-		__BITFIELD_FIELD(u32 ahberrmsk			: 1,
-		__BITFIELD_FIELD(u32 chhltdmsk			: 1,
-		__BITFIELD_FIELD(u32 xfercomplmsk		: 1,
-		;))))))))))))
-	} s;
-};
-
-/**
- * cvmx_usbc#_hcsplt#
- *
- * Host Channel-n Split Control Register (HCSPLT)
- *
- */
-union cvmx_usbcx_hcspltx {
-	u32 u32;
-	/**
-	 * struct cvmx_usbcx_hcspltx_s
-	 * @spltena: Split Enable (SpltEna)
-	 *	The application sets this field to indicate that this channel is
-	 *	enabled to perform split transactions.
-	 * @compsplt: Do Complete Split (CompSplt)
-	 *	The application sets this field to request the OTG host to
-	 *	perform a complete split transaction.
-	 * @xactpos: Transaction Position (XactPos)
-	 *	This field is used to determine whether to send all, first,
-	 *	middle, or last payloads with each OUT transaction.
-	 *	* 2'b11: All. This is the entire data payload is of this
-	 *	transaction (which is less than or equal to 188 bytes).
-	 *	* 2'b10: Begin. This is the first data payload of this
-	 *	transaction (which is larger than 188 bytes).
-	 *	* 2'b00: Mid. This is the middle payload of this transaction
-	 *	(which is larger than 188 bytes).
-	 *	* 2'b01: End. This is the last payload of this transaction
-	 *	(which is larger than 188 bytes).
-	 * @hubaddr: Hub Address (HubAddr)
-	 *	This field holds the device address of the transaction
-	 *	translator's hub.
-	 * @prtaddr: Port Address (PrtAddr)
-	 *	This field is the port number of the recipient transaction
-	 *	translator.
-	 */
-	struct cvmx_usbcx_hcspltx_s {
-		__BITFIELD_FIELD(u32 spltena			: 1,
-		__BITFIELD_FIELD(u32 reserved_17_30		: 14,
-		__BITFIELD_FIELD(u32 compsplt			: 1,
-		__BITFIELD_FIELD(u32 xactpos			: 2,
-		__BITFIELD_FIELD(u32 hubaddr			: 7,
-		__BITFIELD_FIELD(u32 prtaddr			: 7,
-		;))))))
-	} s;
-};
-
-/**
- * cvmx_usbc#_hctsiz#
- *
- * Host Channel-n Transfer Size Register (HCTSIZ)
- *
- */
-union cvmx_usbcx_hctsizx {
-	u32 u32;
-	/**
-	 * struct cvmx_usbcx_hctsizx_s
-	 * @dopng: Do Ping (DoPng)
-	 *	Setting this field to 1 directs the host to do PING protocol.
-	 * @pid: PID (Pid)
-	 *	The application programs this field with the type of PID to use
-	 *	for the initial transaction. The host will maintain this field
-	 *	for the rest of the transfer.
-	 *	* 2'b00: DATA0
-	 *	* 2'b01: DATA2
-	 *	* 2'b10: DATA1
-	 *	* 2'b11: MDATA (non-control)/SETUP (control)
-	 * @pktcnt: Packet Count (PktCnt)
-	 *	This field is programmed by the application with the expected
-	 *	number of packets to be transmitted (OUT) or received (IN).
-	 *	The host decrements this count on every successful
-	 *	transmission or reception of an OUT/IN packet. Once this count
-	 *	reaches zero, the application is interrupted to indicate normal
-	 *	completion.
-	 * @xfersize: Transfer Size (XferSize)
-	 *	For an OUT, this field is the number of data bytes the host will
-	 *	send during the transfer.
-	 *	For an IN, this field is the buffer size that the application
-	 *	has reserved for the transfer. The application is expected to
-	 *	program this field as an integer multiple of the maximum packet
-	 *	size for IN transactions (periodic and non-periodic).
-	 */
-	struct cvmx_usbcx_hctsizx_s {
-		__BITFIELD_FIELD(u32 dopng		: 1,
-		__BITFIELD_FIELD(u32 pid		: 2,
-		__BITFIELD_FIELD(u32 pktcnt		: 10,
-		__BITFIELD_FIELD(u32 xfersize		: 19,
-		;))))
-	} s;
-};
-
-/**
- * cvmx_usbc#_hfir
- *
- * Host Frame Interval Register (HFIR)
- *
- * This register stores the frame interval information for the current speed to
- * which the O2P USB core has enumerated.
- */
-union cvmx_usbcx_hfir {
-	u32 u32;
-	/**
-	 * struct cvmx_usbcx_hfir_s
-	 * @frint: Frame Interval (FrInt)
-	 *	The value that the application programs to this field specifies
-	 *	the interval between two consecutive SOFs (FS) or micro-
-	 *	SOFs (HS) or Keep-Alive tokens (HS). This field contains the
-	 *	number of PHY clocks that constitute the required frame
-	 *	interval. The default value set in this field for a FS operation
-	 *	when the PHY clock frequency is 60 MHz. The application can
-	 *	write a value to this register only after the Port Enable bit of
-	 *	the Host Port Control and Status register (HPRT.PrtEnaPort)
-	 *	has been set. If no value is programmed, the core calculates
-	 *	the value based on the PHY clock specified in the FS/LS PHY
-	 *	Clock Select field of the Host Configuration register
-	 *	(HCFG.FSLSPclkSel). Do not change the value of this field
-	 *	after the initial configuration.
-	 *	* 125 us (PHY clock frequency for HS)
-	 *	* 1 ms (PHY clock frequency for FS/LS)
-	 */
-	struct cvmx_usbcx_hfir_s {
-		__BITFIELD_FIELD(u32 reserved_16_31		: 16,
-		__BITFIELD_FIELD(u32 frint			: 16,
-		;))
-	} s;
-};
-
-/**
- * cvmx_usbc#_hfnum
- *
- * Host Frame Number/Frame Time Remaining Register (HFNUM)
- *
- * This register indicates the current frame number.
- * It also indicates the time remaining (in terms of the number of PHY clocks)
- * in the current (micro)frame.
- */
-union cvmx_usbcx_hfnum {
-	u32 u32;
-	/**
-	 * struct cvmx_usbcx_hfnum_s
-	 * @frrem: Frame Time Remaining (FrRem)
-	 *	Indicates the amount of time remaining in the current
-	 *	microframe (HS) or frame (FS/LS), in terms of PHY clocks.
-	 *	This field decrements on each PHY clock. When it reaches
-	 *	zero, this field is reloaded with the value in the Frame
-	 *	Interval register and a new SOF is transmitted on the USB.
-	 * @frnum: Frame Number (FrNum)
-	 *	This field increments when a new SOF is transmitted on the
-	 *	USB, and is reset to 0 when it reaches 16'h3FFF.
-	 */
-	struct cvmx_usbcx_hfnum_s {
-		__BITFIELD_FIELD(u32 frrem		: 16,
-		__BITFIELD_FIELD(u32 frnum		: 16,
-		;))
-	} s;
-};
-
-/**
- * cvmx_usbc#_hprt
- *
- * Host Port Control and Status Register (HPRT)
- *
- * This register is available in both Host and Device modes.
- * Currently, the OTG Host supports only one port.
- * A single register holds USB port-related information such as USB reset,
- * enable, suspend, resume, connect status, and test mode for each port. The
- * R_SS_WC bits in this register can trigger an interrupt to the application
- * through the Host Port Interrupt bit of the Core Interrupt register
- * (GINTSTS.PrtInt). On a Port Interrupt, the application must read this
- * register and clear the bit that caused the interrupt. For the R_SS_WC bits,
- * the application must write a 1 to the bit to clear the interrupt.
- */
-union cvmx_usbcx_hprt {
-	u32 u32;
-	/**
-	 * struct cvmx_usbcx_hprt_s
-	 * @prtspd: Port Speed (PrtSpd)
-	 *	Indicates the speed of the device attached to this port.
-	 *	* 2'b00: High speed
-	 *	* 2'b01: Full speed
-	 *	* 2'b10: Low speed
-	 *	* 2'b11: Reserved
-	 * @prttstctl: Port Test Control (PrtTstCtl)
-	 *	The application writes a nonzero value to this field to put
-	 *	the port into a Test mode, and the corresponding pattern is
-	 *	signaled on the port.
-	 *	* 4'b0000: Test mode disabled
-	 *	* 4'b0001: Test_J mode
-	 *	* 4'b0010: Test_K mode
-	 *	* 4'b0011: Test_SE0_NAK mode
-	 *	* 4'b0100: Test_Packet mode
-	 *	* 4'b0101: Test_Force_Enable
-	 *	* Others: Reserved
-	 *	PrtSpd must be zero (i.e. the interface must be in high-speed
-	 *	mode) to use the PrtTstCtl test modes.
-	 * @prtpwr: Port Power (PrtPwr)
-	 *	The application uses this field to control power to this port,
-	 *	and the core clears this bit on an overcurrent condition.
-	 *	* 1'b0: Power off
-	 *	* 1'b1: Power on
-	 * @prtlnsts: Port Line Status (PrtLnSts)
-	 *	Indicates the current logic level USB data lines
-	 *	* Bit [10]: Logic level of D-
-	 *	* Bit [11]: Logic level of D+
-	 * @prtrst: Port Reset (PrtRst)
-	 *	When the application sets this bit, a reset sequence is
-	 *	started on this port. The application must time the reset
-	 *	period and clear this bit after the reset sequence is
-	 *	complete.
-	 *	* 1'b0: Port not in reset
-	 *	* 1'b1: Port in reset
-	 *	The application must leave this bit set for at least a
-	 *	minimum duration mentioned below to start a reset on the
-	 *	port. The application can leave it set for another 10 ms in
-	 *	addition to the required minimum duration, before clearing
-	 *	the bit, even though there is no maximum limit set by the
-	 *	USB standard.
-	 *	* High speed: 50 ms
-	 *	* Full speed/Low speed: 10 ms
-	 * @prtsusp: Port Suspend (PrtSusp)
-	 *	The application sets this bit to put this port in Suspend
-	 *	mode. The core only stops sending SOFs when this is set.
-	 *	To stop the PHY clock, the application must set the Port
-	 *	Clock Stop bit, which will assert the suspend input pin of
-	 *	the PHY.
-	 *	The read value of this bit reflects the current suspend
-	 *	status of the port. This bit is cleared by the core after a
-	 *	remote wakeup signal is detected or the application sets
-	 *	the Port Reset bit or Port Resume bit in this register or the
-	 *	Resume/Remote Wakeup Detected Interrupt bit or
-	 *	Disconnect Detected Interrupt bit in the Core Interrupt
-	 *	register (GINTSTS.WkUpInt or GINTSTS.DisconnInt,
-	 *	respectively).
-	 *	* 1'b0: Port not in Suspend mode
-	 *	* 1'b1: Port in Suspend mode
-	 * @prtres: Port Resume (PrtRes)
-	 *	The application sets this bit to drive resume signaling on
-	 *	the port. The core continues to drive the resume signal
-	 *	until the application clears this bit.
-	 *	If the core detects a USB remote wakeup sequence, as
-	 *	indicated by the Port Resume/Remote Wakeup Detected
-	 *	Interrupt bit of the Core Interrupt register
-	 *	(GINTSTS.WkUpInt), the core starts driving resume
-	 *	signaling without application intervention and clears this bit
-	 *	when it detects a disconnect condition. The read value of
-	 *	this bit indicates whether the core is currently driving
-	 *	resume signaling.
-	 *	* 1'b0: No resume driven
-	 *	* 1'b1: Resume driven
-	 * @prtovrcurrchng: Port Overcurrent Change (PrtOvrCurrChng)
-	 *	The core sets this bit when the status of the Port
-	 *	Overcurrent Active bit (bit 4) in this register changes.
-	 * @prtovrcurract: Port Overcurrent Active (PrtOvrCurrAct)
-	 *	Indicates the overcurrent condition of the port.
-	 *	* 1'b0: No overcurrent condition
-	 *	* 1'b1: Overcurrent condition
-	 * @prtenchng: Port Enable/Disable Change (PrtEnChng)
-	 *	The core sets this bit when the status of the Port Enable bit
-	 *	[2] of this register changes.
-	 * @prtena: Port Enable (PrtEna)
-	 *	A port is enabled only by the core after a reset sequence,
-	 *	and is disabled by an overcurrent condition, a disconnect
-	 *	condition, or by the application clearing this bit. The
-	 *	application cannot set this bit by a register write. It can only
-	 *	clear it to disable the port. This bit does not trigger any
-	 *	interrupt to the application.
-	 *	* 1'b0: Port disabled
-	 *	* 1'b1: Port enabled
-	 * @prtconndet: Port Connect Detected (PrtConnDet)
-	 *	The core sets this bit when a device connection is detected
-	 *	to trigger an interrupt to the application using the Host Port
-	 *	Interrupt bit of the Core Interrupt register (GINTSTS.PrtInt).
-	 *	The application must write a 1 to this bit to clear the
-	 *	interrupt.
-	 * @prtconnsts: Port Connect Status (PrtConnSts)
-	 *	* 0: No device is attached to the port.
-	 *	* 1: A device is attached to the port.
-	 */
-	struct cvmx_usbcx_hprt_s {
-		__BITFIELD_FIELD(u32 reserved_19_31	: 13,
-		__BITFIELD_FIELD(u32 prtspd		: 2,
-		__BITFIELD_FIELD(u32 prttstctl		: 4,
-		__BITFIELD_FIELD(u32 prtpwr		: 1,
-		__BITFIELD_FIELD(u32 prtlnsts		: 2,
-		__BITFIELD_FIELD(u32 reserved_9_9	: 1,
-		__BITFIELD_FIELD(u32 prtrst		: 1,
-		__BITFIELD_FIELD(u32 prtsusp		: 1,
-		__BITFIELD_FIELD(u32 prtres		: 1,
-		__BITFIELD_FIELD(u32 prtovrcurrchng	: 1,
-		__BITFIELD_FIELD(u32 prtovrcurract	: 1,
-		__BITFIELD_FIELD(u32 prtenchng		: 1,
-		__BITFIELD_FIELD(u32 prtena		: 1,
-		__BITFIELD_FIELD(u32 prtconndet		: 1,
-		__BITFIELD_FIELD(u32 prtconnsts		: 1,
-		;)))))))))))))))
-	} s;
-};
-
-/**
- * cvmx_usbc#_hptxfsiz
- *
- * Host Periodic Transmit FIFO Size Register (HPTXFSIZ)
- *
- * This register holds the size and the memory start address of the Periodic
- * TxFIFO, as shown in Figures 310 and 311.
- */
-union cvmx_usbcx_hptxfsiz {
-	u32 u32;
-	/**
-	 * struct cvmx_usbcx_hptxfsiz_s
-	 * @ptxfsize: Host Periodic TxFIFO Depth (PTxFSize)
-	 *	This value is in terms of 32-bit words.
-	 *	* Minimum value is 16
-	 *	* Maximum value is 32768
-	 * @ptxfstaddr: Host Periodic TxFIFO Start Address (PTxFStAddr)
-	 */
-	struct cvmx_usbcx_hptxfsiz_s {
-		__BITFIELD_FIELD(u32 ptxfsize	: 16,
-		__BITFIELD_FIELD(u32 ptxfstaddr	: 16,
-		;))
-	} s;
-};
-
-/**
- * cvmx_usbc#_hptxsts
- *
- * Host Periodic Transmit FIFO/Queue Status Register (HPTXSTS)
- *
- * This read-only register contains the free space information for the Periodic
- * TxFIFO and the Periodic Transmit Request Queue
- */
-union cvmx_usbcx_hptxsts {
-	u32 u32;
-	/**
-	 * struct cvmx_usbcx_hptxsts_s
-	 * @ptxqtop: Top of the Periodic Transmit Request Queue (PTxQTop)
-	 *	This indicates the entry in the Periodic Tx Request Queue that
-	 *	is currently being processes by the MAC.
-	 *	This register is used for debugging.
-	 *	* Bit [31]: Odd/Even (micro)frame
-	 *	- 1'b0: send in even (micro)frame
-	 *	- 1'b1: send in odd (micro)frame
-	 *	* Bits [30:27]: Channel/endpoint number
-	 *	* Bits [26:25]: Type
-	 *	- 2'b00: IN/OUT
-	 *	- 2'b01: Zero-length packet
-	 *	- 2'b10: CSPLIT
-	 *	- 2'b11: Disable channel command
-	 *	* Bit [24]: Terminate (last entry for the selected
-	 *	channel/endpoint)
-	 * @ptxqspcavail: Periodic Transmit Request Queue Space Available
-	 *	(PTxQSpcAvail)
-	 *	Indicates the number of free locations available to be written
-	 *	in the Periodic Transmit Request Queue. This queue holds both
-	 *	IN and OUT requests.
-	 *	* 8'h0: Periodic Transmit Request Queue is full
-	 *	* 8'h1: 1 location available
-	 *	* 8'h2: 2 locations available
-	 *	* n: n locations available (0..8)
-	 *	* Others: Reserved
-	 * @ptxfspcavail: Periodic Transmit Data FIFO Space Available
-	 *		  (PTxFSpcAvail)
-	 *	Indicates the number of free locations available to be written
-	 *	to in the Periodic TxFIFO.
-	 *	Values are in terms of 32-bit words
-	 *	* 16'h0: Periodic TxFIFO is full
-	 *	* 16'h1: 1 word available
-	 *	* 16'h2: 2 words available
-	 *	* 16'hn: n words available (where 0..32768)
-	 *	* 16'h8000: 32768 words available
-	 *	* Others: Reserved
-	 */
-	struct cvmx_usbcx_hptxsts_s {
-		__BITFIELD_FIELD(u32 ptxqtop		: 8,
-		__BITFIELD_FIELD(u32 ptxqspcavail	: 8,
-		__BITFIELD_FIELD(u32 ptxfspcavail	: 16,
-		;)))
-	} s;
-};
-
-/**
- * cvmx_usbn#_clk_ctl
- *
- * USBN_CLK_CTL = USBN's Clock Control
- *
- * This register is used to control the frequency of the hclk and the
- * hreset and phy_rst signals.
- */
-union cvmx_usbnx_clk_ctl {
-	u64 u64;
-	/**
-	 * struct cvmx_usbnx_clk_ctl_s
-	 * @divide2: The 'hclk' used by the USB subsystem is derived
-	 *	from the eclk.
-	 *	Also see the field DIVIDE. DIVIDE2<1> must currently
-	 *	be zero because it is not implemented, so the maximum
-	 *	ratio of eclk/hclk is currently 16.
-	 *	The actual divide number for hclk is:
-	 *	(DIVIDE2 + 1) * (DIVIDE + 1)
-	 * @hclk_rst: When this field is '0' the HCLK-DIVIDER used to
-	 *	generate the hclk in the USB Subsystem is held
-	 *	in reset. This bit must be set to '0' before
-	 *	changing the value os DIVIDE in this register.
-	 *	The reset to the HCLK_DIVIDERis also asserted
-	 *	when core reset is asserted.
-	 * @p_x_on: Force USB-PHY on during suspend.
-	 *	'1' USB-PHY XO block is powered-down during
-	 *	suspend.
-	 *	'0' USB-PHY XO block is powered-up during
-	 *	suspend.
-	 *	The value of this field must be set while POR is
-	 *	active.
-	 * @p_rtype: PHY reference clock type
-	 *	On CN50XX/CN52XX/CN56XX the values are:
-	 *		'0' The USB-PHY uses a 12MHz crystal as a clock source
-	 *		    at the USB_XO and USB_XI pins.
-	 *		'1' Reserved.
-	 *		'2' The USB_PHY uses 12/24/48MHz 2.5V board clock at the
-	 *		    USB_XO pin. USB_XI should be tied to ground in this
-	 *		    case.
-	 *		'3' Reserved.
-	 *	On CN3xxx bits 14 and 15 are p_xenbn and p_rclk and values are:
-	 *		'0' Reserved.
-	 *		'1' Reserved.
-	 *		'2' The PHY PLL uses the XO block output as a reference.
-	 *		    The XO block uses an external clock supplied on the
-	 *		    XO pin. USB_XI should be tied to ground for this
-	 *		    usage.
-	 *		'3' The XO block uses the clock from a crystal.
-	 * @p_com_on: '0' Force USB-PHY XO Bias, Bandgap and PLL to
-	 *	remain powered in Suspend Mode.
-	 *	'1' The USB-PHY XO Bias, Bandgap and PLL are
-	 *	powered down in suspend mode.
-	 *	The value of this field must be set while POR is
-	 *	active.
-	 * @p_c_sel: Phy clock speed select.
-	 *	Selects the reference clock / crystal frequency.
-	 *	'11': Reserved
-	 *	'10': 48 MHz (reserved when a crystal is used)
-	 *	'01': 24 MHz (reserved when a crystal is used)
-	 *	'00': 12 MHz
-	 *	The value of this field must be set while POR is
-	 *	active.
-	 *	NOTE: if a crystal is used as a reference clock,
-	 *	this field must be set to 12 MHz.
-	 * @cdiv_byp: Used to enable the bypass input to the USB_CLK_DIV.
-	 * @sd_mode: Scaledown mode for the USBC. Control timing events
-	 *	in the USBC, for normal operation this must be '0'.
-	 * @s_bist: Starts bist on the hclk memories, during the '0'
-	 *	to '1' transition.
-	 * @por: Power On Reset for the PHY.
-	 *	Resets all the PHYS registers and state machines.
-	 * @enable: When '1' allows the generation of the hclk. When
-	 *	'0' the hclk will not be generated. SEE DIVIDE
-	 *	field of this register.
-	 * @prst: When this field is '0' the reset associated with
-	 *	the phy_clk functionality in the USB Subsystem is
-	 *	help in reset. This bit should not be set to '1'
-	 *	until the time it takes 6 clocks (hclk or phy_clk,
-	 *	whichever is slower) has passed. Under normal
-	 *	operation once this bit is set to '1' it should not
-	 *	be set to '0'.
-	 * @hrst: When this field is '0' the reset associated with
-	 *	the hclk functioanlity in the USB Subsystem is
-	 *	held in reset.This bit should not be set to '1'
-	 *	until 12ms after phy_clk is stable. Under normal
-	 *	operation, once this bit is set to '1' it should
-	 *	not be set to '0'.
-	 * @divide: The frequency of 'hclk' used by the USB subsystem
-	 *	is the eclk frequency divided by the value of
-	 *	(DIVIDE2 + 1) * (DIVIDE + 1), also see the field
-	 *	DIVIDE2 of this register.
-	 *	The hclk frequency should be less than 125Mhz.
-	 *	After writing a value to this field the SW should
-	 *	read the field for the value written.
-	 *	The ENABLE field of this register should not be set
-	 *	until AFTER this field is set and then read.
-	 */
-	struct cvmx_usbnx_clk_ctl_s {
-		__BITFIELD_FIELD(u64 reserved_20_63	: 44,
-		__BITFIELD_FIELD(u64 divide2		: 2,
-		__BITFIELD_FIELD(u64 hclk_rst		: 1,
-		__BITFIELD_FIELD(u64 p_x_on		: 1,
-		__BITFIELD_FIELD(u64 p_rtype		: 2,
-		__BITFIELD_FIELD(u64 p_com_on		: 1,
-		__BITFIELD_FIELD(u64 p_c_sel		: 2,
-		__BITFIELD_FIELD(u64 cdiv_byp		: 1,
-		__BITFIELD_FIELD(u64 sd_mode		: 2,
-		__BITFIELD_FIELD(u64 s_bist		: 1,
-		__BITFIELD_FIELD(u64 por		: 1,
-		__BITFIELD_FIELD(u64 enable		: 1,
-		__BITFIELD_FIELD(u64 prst		: 1,
-		__BITFIELD_FIELD(u64 hrst		: 1,
-		__BITFIELD_FIELD(u64 divide		: 3,
-		;)))))))))))))))
-	} s;
-};
-
-/**
- * cvmx_usbn#_usbp_ctl_status
- *
- * USBN_USBP_CTL_STATUS = USBP Control And Status Register
- *
- * Contains general control and status information for the USBN block.
- */
-union cvmx_usbnx_usbp_ctl_status {
-	u64 u64;
-	/**
-	 * struct cvmx_usbnx_usbp_ctl_status_s
-	 * @txrisetune: HS Transmitter Rise/Fall Time Adjustment
-	 * @txvreftune: HS DC Voltage Level Adjustment
-	 * @txfslstune: FS/LS Source Impedance Adjustment
-	 * @txhsxvtune: Transmitter High-Speed Crossover Adjustment
-	 * @sqrxtune: Squelch Threshold Adjustment
-	 * @compdistune: Disconnect Threshold Adjustment
-	 * @otgtune: VBUS Valid Threshold Adjustment
-	 * @otgdisable: OTG Block Disable
-	 * @portreset: Per_Port Reset
-	 * @drvvbus: Drive VBUS
-	 * @lsbist: Low-Speed BIST Enable.
-	 * @fsbist: Full-Speed BIST Enable.
-	 * @hsbist: High-Speed BIST Enable.
-	 * @bist_done: PHY Bist Done.
-	 *	Asserted at the end of the PHY BIST sequence.
-	 * @bist_err: PHY Bist Error.
-	 *	Indicates an internal error was detected during
-	 *	the BIST sequence.
-	 * @tdata_out: PHY Test Data Out.
-	 *	Presents either internally generated signals or
-	 *	test register contents, based upon the value of
-	 *	test_data_out_sel.
-	 * @siddq: Drives the USBP (USB-PHY) SIDDQ input.
-	 *	Normally should be set to zero.
-	 *	When customers have no intent to use USB PHY
-	 *	interface, they should:
-	 *	- still provide 3.3V to USB_VDD33, and
-	 *	- tie USB_REXT to 3.3V supply, and
-	 *	- set USBN*_USBP_CTL_STATUS[SIDDQ]=1
-	 * @txpreemphasistune: HS Transmitter Pre-Emphasis Enable
-	 * @dma_bmode: When set to 1 the L2C DMA address will be updated
-	 *	with byte-counts between packets. When set to 0
-	 *	the L2C DMA address is incremented to the next
-	 *	4-byte aligned address after adding byte-count.
-	 * @usbc_end: Bigendian input to the USB Core. This should be
-	 *	set to '0' for operation.
-	 * @usbp_bist: PHY, This is cleared '0' to run BIST on the USBP.
-	 * @tclk: PHY Test Clock, used to load TDATA_IN to the USBP.
-	 * @dp_pulld: PHY DP_PULLDOWN input to the USB-PHY.
-	 *	This signal enables the pull-down resistance on
-	 *	the D+ line. '1' pull down-resistance is connected
-	 *	to D+/ '0' pull down resistance is not connected
-	 *	to D+. When an A/B device is acting as a host
-	 *	(downstream-facing port), dp_pulldown and
-	 *	dm_pulldown are enabled. This must not toggle
-	 *	during normal operation.
-	 * @dm_pulld: PHY DM_PULLDOWN input to the USB-PHY.
-	 *	This signal enables the pull-down resistance on
-	 *	the D- line. '1' pull down-resistance is connected
-	 *	to D-. '0' pull down resistance is not connected
-	 *	to D-. When an A/B device is acting as a host
-	 *	(downstream-facing port), dp_pulldown and
-	 *	dm_pulldown are enabled. This must not toggle
-	 *	during normal operation.
-	 * @hst_mode: When '0' the USB is acting as HOST, when '1'
-	 *	USB is acting as device. This field needs to be
-	 *	set while the USB is in reset.
-	 * @tuning: Transmitter Tuning for High-Speed Operation.
-	 *	Tunes the current supply and rise/fall output
-	 *	times for high-speed operation.
-	 *	[20:19] == 11: Current supply increased
-	 *	approximately 9%
-	 *	[20:19] == 10: Current supply increased
-	 *	approximately 4.5%
-	 *	[20:19] == 01: Design default.
-	 *	[20:19] == 00: Current supply decreased
-	 *	approximately 4.5%
-	 *	[22:21] == 11: Rise and fall times are increased.
-	 *	[22:21] == 10: Design default.
-	 *	[22:21] == 01: Rise and fall times are decreased.
-	 *	[22:21] == 00: Rise and fall times are decreased
-	 *	further as compared to the 01 setting.
-	 * @tx_bs_enh: Transmit Bit Stuffing on [15:8].
-	 *	Enables or disables bit stuffing on data[15:8]
-	 *	when bit-stuffing is enabled.
-	 * @tx_bs_en: Transmit Bit Stuffing on [7:0].
-	 *	Enables or disables bit stuffing on data[7:0]
-	 *	when bit-stuffing is enabled.
-	 * @loop_enb: PHY Loopback Test Enable.
-	 *	'1': During data transmission the receive is
-	 *	enabled.
-	 *	'0': During data transmission the receive is
-	 *	disabled.
-	 *	Must be '0' for normal operation.
-	 * @vtest_enb: Analog Test Pin Enable.
-	 *	'1' The PHY's analog_test pin is enabled for the
-	 *	input and output of applicable analog test signals.
-	 *	'0' THe analog_test pin is disabled.
-	 * @bist_enb: Built-In Self Test Enable.
-	 *	Used to activate BIST in the PHY.
-	 * @tdata_sel: Test Data Out Select.
-	 *	'1' test_data_out[3:0] (PHY) register contents
-	 *	are output. '0' internally generated signals are
-	 *	output.
-	 * @taddr_in: Mode Address for Test Interface.
-	 *	Specifies the register address for writing to or
-	 *	reading from the PHY test interface register.
-	 * @tdata_in: Internal Testing Register Input Data and Select
-	 *	This is a test bus. Data is present on [3:0],
-	 *	and its corresponding select (enable) is present
-	 *	on bits [7:4].
-	 * @ate_reset: Reset input from automatic test equipment.
-	 *	This is a test signal. When the USB Core is
-	 *	powered up (not in Susned Mode), an automatic
-	 *	tester can use this to disable phy_clock and
-	 *	free_clk, then re-enable them with an aligned
-	 *	phase.
-	 *	'1': The phy_clk and free_clk outputs are
-	 *	disabled. "0": The phy_clock and free_clk outputs
-	 *	are available within a specific period after the
-	 *	de-assertion.
-	 */
-	struct cvmx_usbnx_usbp_ctl_status_s {
-		__BITFIELD_FIELD(u64 txrisetune		: 1,
-		__BITFIELD_FIELD(u64 txvreftune		: 4,
-		__BITFIELD_FIELD(u64 txfslstune		: 4,
-		__BITFIELD_FIELD(u64 txhsxvtune		: 2,
-		__BITFIELD_FIELD(u64 sqrxtune		: 3,
-		__BITFIELD_FIELD(u64 compdistune	: 3,
-		__BITFIELD_FIELD(u64 otgtune		: 3,
-		__BITFIELD_FIELD(u64 otgdisable		: 1,
-		__BITFIELD_FIELD(u64 portreset		: 1,
-		__BITFIELD_FIELD(u64 drvvbus		: 1,
-		__BITFIELD_FIELD(u64 lsbist		: 1,
-		__BITFIELD_FIELD(u64 fsbist		: 1,
-		__BITFIELD_FIELD(u64 hsbist		: 1,
-		__BITFIELD_FIELD(u64 bist_done		: 1,
-		__BITFIELD_FIELD(u64 bist_err		: 1,
-		__BITFIELD_FIELD(u64 tdata_out		: 4,
-		__BITFIELD_FIELD(u64 siddq		: 1,
-		__BITFIELD_FIELD(u64 txpreemphasistune	: 1,
-		__BITFIELD_FIELD(u64 dma_bmode		: 1,
-		__BITFIELD_FIELD(u64 usbc_end		: 1,
-		__BITFIELD_FIELD(u64 usbp_bist		: 1,
-		__BITFIELD_FIELD(u64 tclk		: 1,
-		__BITFIELD_FIELD(u64 dp_pulld		: 1,
-		__BITFIELD_FIELD(u64 dm_pulld		: 1,
-		__BITFIELD_FIELD(u64 hst_mode		: 1,
-		__BITFIELD_FIELD(u64 tuning		: 4,
-		__BITFIELD_FIELD(u64 tx_bs_enh		: 1,
-		__BITFIELD_FIELD(u64 tx_bs_en		: 1,
-		__BITFIELD_FIELD(u64 loop_enb		: 1,
-		__BITFIELD_FIELD(u64 vtest_enb		: 1,
-		__BITFIELD_FIELD(u64 bist_enb		: 1,
-		__BITFIELD_FIELD(u64 tdata_sel		: 1,
-		__BITFIELD_FIELD(u64 taddr_in		: 4,
-		__BITFIELD_FIELD(u64 tdata_in		: 8,
-		__BITFIELD_FIELD(u64 ate_reset		: 1,
-		;)))))))))))))))))))))))))))))))))))
-	} s;
-};
-
-#endif /* __OCTEON_HCD_H__ */