diff options
| author | Siddharth Vadapalli <s-vadapalli@ti.com> | 2024-03-28 14:20:41 +0530 |
|---|---|---|
| committer | Bjorn Helgaas <bhelgaas@google.com> | 2024-05-28 11:15:15 -0500 |
| commit | 9ffa0e70b2daf9b0271e4960b7c8a2350e2cda08 (patch) | |
| tree | 2477d77a291505be83be42f829e2b2de657fc0b4 /drivers/pci/controller/dwc | |
| parent | 5125fdc3292eea20870d4e6cefa62dc1245ce7ec (diff) | |
| download | lwn-9ffa0e70b2daf9b0271e4960b7c8a2350e2cda08.tar.gz lwn-9ffa0e70b2daf9b0271e4960b7c8a2350e2cda08.zip | |
PCI: keystone: Don't enable BAR 0 for AM654x
After 6ab15b5e7057 ("PCI: dwc: keystone: Convert .scan_bus() callback to
use add_bus"), ks_pcie_v3_65_add_bus() enabled BAR 0 for both v3.65a and
v4.90a devices. On the AM654x SoC, which uses v4.90a, enabling BAR 0
causes Completion Timeouts when setting up MSI-X. These timeouts delay
boot of the AM654x by about 45 seconds.
Move the BAR 0 initialization to ks_pcie_msi_host_init(), which is only
used for v3.65a devices, and remove ks_pcie_v3_65_add_bus().
[bhelgaas: commit log]
Fixes: 6ab15b5e7057 ("PCI: dwc: keystone: Convert .scan_bus() callback to use add_bus")
Link: https://lore.kernel.org/linux-pci/20240328085041.2916899-3-s-vadapalli@ti.com
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Suggested-by: Niklas Cassel <cassel@kernel.org>
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Diffstat (limited to 'drivers/pci/controller/dwc')
| -rw-r--r-- | drivers/pci/controller/dwc/pci-keystone.c | 52 |
1 files changed, 18 insertions, 34 deletions
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c index cff5bca45878..57135eee2d7d 100644 --- a/drivers/pci/controller/dwc/pci-keystone.c +++ b/drivers/pci/controller/dwc/pci-keystone.c @@ -289,6 +289,24 @@ static void ks_pcie_clear_dbi_mode(struct keystone_pcie *ks_pcie) static int ks_pcie_msi_host_init(struct dw_pcie_rp *pp) { + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); + + /* Configure and set up BAR0 */ + ks_pcie_set_dbi_mode(ks_pcie); + + /* Enable BAR0 */ + dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 1); + dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, SZ_4K - 1); + + ks_pcie_clear_dbi_mode(ks_pcie); + + /* + * For BAR0, just setting bus address for inbound writes (MSI) should + * be sufficient. Use physical address to avoid any conflicts. + */ + dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, ks_pcie->app.start); + pp->msi_irq_chip = &ks_pcie_msi_irq_chip; return dw_pcie_allocate_domains(pp); } @@ -445,44 +463,10 @@ static struct pci_ops ks_child_pcie_ops = { .write = pci_generic_config_write, }; -/** - * ks_pcie_v3_65_add_bus() - keystone add_bus post initialization - * @bus: A pointer to the PCI bus structure. - * - * This sets BAR0 to enable inbound access for MSI_IRQ register - */ -static int ks_pcie_v3_65_add_bus(struct pci_bus *bus) -{ - struct dw_pcie_rp *pp = bus->sysdata; - struct dw_pcie *pci = to_dw_pcie_from_pp(pp); - struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); - - if (!pci_is_root_bus(bus)) - return 0; - - /* Configure and set up BAR0 */ - ks_pcie_set_dbi_mode(ks_pcie); - - /* Enable BAR0 */ - dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 1); - dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, SZ_4K - 1); - - ks_pcie_clear_dbi_mode(ks_pcie); - - /* - * For BAR0, just setting bus address for inbound writes (MSI) should - * be sufficient. Use physical address to avoid any conflicts. - */ - dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, ks_pcie->app.start); - - return 0; -} - static struct pci_ops ks_pcie_ops = { .map_bus = dw_pcie_own_conf_map_bus, .read = pci_generic_config_read, .write = pci_generic_config_write, - .add_bus = ks_pcie_v3_65_add_bus, }; /** |