Merge tag 'char-misc-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc/whatever driver changes for 5.6-rc1

  Included in here are loads of things from a variety of different
  driver subsystems:
   - soundwire updates
   - binder updates
   - nvmem updates
   - firmware drivers updates
   - extcon driver updates
   - various misc driver updates
   - fpga driver updates
   - interconnect subsystem and driver updates
   - bus driver updates
   - uio driver updates
   - mei driver updates
   - w1 driver cleanups
   - various other small driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (86 commits)
  mei: me: add jasper point DID
  char: hpet: Use flexible-array member
  binder: fix log spam for existing debugfs file creation.
  mei: me: add comet point (lake) H device ids
  nvmem: add QTI SDAM driver
  dt-bindings: nvmem: add binding for QTI SPMI SDAM
  dt-bindings: imx-ocotp: Add i.MX8MP compatible
  dt-bindings: soundwire: fix example
  soundwire: cadence: fix kernel-doc parameter descriptions
  soundwire: intel: report slave_ids for each link to SOF driver
  siox: Use the correct style for SPDX License Identifier
  w1: omap-hdq: Simplify driver with PM runtime autosuspend
  firmware: stratix10-svc: Remove unneeded semicolon
  firmware: google: Probe for a GSMI handler in firmware
  firmware: google: Unregister driver_info on failure and exit in gsmi
  firmware: google: Release devices before unregistering the bus
  slimbus: qcom: add missed clk_disable_unprepare in remove
  slimbus: Use the correct style for SPDX License Identifier
  slimbus: qcom-ngd-ctrl: Use dma_request_chan() instead dma_request_slave_channel()
  dt-bindings: SLIMBus: add slim devices optional properties
  ...

6 files changed, 271 insertions, 34 deletions

diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index 73567e922491..35efab1ba8d9 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -109,6 +109,14 @@ config QCOM_QFPROM
 	  This driver can also be built as a module. If so, the module
 	  will be called nvmem_qfprom.
 
+config NVMEM_SPMI_SDAM
+	tristate "SPMI SDAM Support"
+	depends on SPMI
+	help
+	  This driver supports the Shared Direct Access Memory Module on
+	  Qualcomm Technologies, Inc. PMICs. It provides the clients
+	  an interface to read/write to the SDAM module's shared memory.
+
 config ROCKCHIP_EFUSE
 	tristate "Rockchip eFuse Support"
 	depends on ARCH_ROCKCHIP || COMPILE_TEST
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 9e667823edb3..6b466cd1427b 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -28,6 +28,8 @@ obj-$(CONFIG_MTK_EFUSE)		+= nvmem_mtk-efuse.o
 nvmem_mtk-efuse-y		:= mtk-efuse.o
 obj-$(CONFIG_QCOM_QFPROM)	+= nvmem_qfprom.o
 nvmem_qfprom-y			:= qfprom.o
+obj-$(CONFIG_NVMEM_SPMI_SDAM)	+= nvmem_qcom-spmi-sdam.o
+nvmem_qcom-spmi-sdam-y		+= qcom-spmi-sdam.o
 obj-$(CONFIG_ROCKCHIP_EFUSE)	+= nvmem_rockchip_efuse.o
 nvmem_rockchip_efuse-y		:= rockchip-efuse.o
 obj-$(CONFIG_ROCKCHIP_OTP)	+= nvmem-rockchip-otp.o
diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index 9f1ee9c766ec..1e4a798dce6e 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -83,7 +83,7 @@ static void nvmem_cell_drop(struct nvmem_cell *cell)
 	list_del(&cell->node);
 	mutex_unlock(&nvmem_mutex);
 	of_node_put(cell->np);
-	kfree(cell->name);
+	kfree_const(cell->name);
 	kfree(cell);
 }
 
@@ -110,7 +110,9 @@ static int nvmem_cell_info_to_nvmem_cell(struct nvmem_device *nvmem,
 	cell->nvmem = nvmem;
 	cell->offset = info->offset;
 	cell->bytes = info->bytes;
-	cell->name = info->name;
+	cell->name = kstrdup_const(info->name, GFP_KERNEL);
+	if (!cell->name)
+		return -ENOMEM;
 
 	cell->bit_offset = info->bit_offset;
 	cell->nbits = info->nbits;
@@ -300,7 +302,7 @@ static int nvmem_add_cells_from_of(struct nvmem_device *nvmem)
 			dev_err(dev, "cell %s unaligned to nvmem stride %d\n",
 				cell->name, nvmem->stride);
 			/* Cells already added will be freed later. */
-			kfree(cell->name);
+			kfree_const(cell->name);
 			kfree(cell);
 			return -EINVAL;
 		}
diff --git a/drivers/nvmem/imx-ocotp-scu.c b/drivers/nvmem/imx-ocotp-scu.c
index 03f1ab23ad51..399e1eb8b4c1 100644
--- a/drivers/nvmem/imx-ocotp-scu.c
+++ b/drivers/nvmem/imx-ocotp-scu.c
@@ -15,8 +15,7 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
-#define IMX_SIP_OTP			0xC200000A
-#define IMX_SIP_OTP_WRITE		0x2
+#define IMX_SIP_OTP_WRITE		0xc200000B
 
 enum ocotp_devtype {
 	IMX8QXP,
@@ -139,8 +138,8 @@ static int imx_scu_ocotp_read(void *context, unsigned int offset,
 	void *p;
 	int i, ret;
 
-	index = offset >> 2;
-	num_bytes = round_up((offset % 4) + bytes, 4);
+	index = offset;
+	num_bytes = round_up(bytes, 4);
 	count = num_bytes >> 2;
 
 	if (count > (priv->data->nregs - index))
@@ -169,7 +168,7 @@ static int imx_scu_ocotp_read(void *context, unsigned int offset,
 		buf++;
 	}
 
-	memcpy(val, (u8 *)p + offset % 4, bytes);
+	memcpy(val, (u8 *)p, bytes);
 
 	mutex_unlock(&scu_ocotp_mutex);
 
@@ -189,10 +188,10 @@ static int imx_scu_ocotp_write(void *context, unsigned int offset,
 	int ret;
 
 	/* allow only writing one complete OTP word at a time */
-	if ((bytes != 4) || (offset % 4))
+	if (bytes != 4)
 		return -EINVAL;
 
-	index = offset >> 2;
+	index = offset;
 
 	if (in_hole(context, index))
 		return -EINVAL;
@@ -212,8 +211,7 @@ static int imx_scu_ocotp_write(void *context, unsigned int offset,
 
 	mutex_lock(&scu_ocotp_mutex);
 
-	arm_smccc_smc(IMX_SIP_OTP, IMX_SIP_OTP_WRITE, index, *buf,
-		      0, 0, 0, 0, &res);
+	arm_smccc_smc(IMX_SIP_OTP_WRITE, index, *buf, 0, 0, 0, 0, 0, &res);
 
 	mutex_unlock(&scu_ocotp_mutex);
 
diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c
index fc40555ca4cd..4ba9cc8f76df 100644
--- a/drivers/nvmem/imx-ocotp.c
+++ b/drivers/nvmem/imx-ocotp.c
@@ -44,6 +44,14 @@
 #define IMX_OCOTP_BM_CTRL_ERROR		0x00000200
 #define IMX_OCOTP_BM_CTRL_REL_SHADOWS	0x00000400
 
+#define IMX_OCOTP_BM_CTRL_DEFAULT				\
+	{							\
+		.bm_addr = IMX_OCOTP_BM_CTRL_ADDR,		\
+		.bm_busy = IMX_OCOTP_BM_CTRL_BUSY,		\
+		.bm_error = IMX_OCOTP_BM_CTRL_ERROR,		\
+		.bm_rel_shadows = IMX_OCOTP_BM_CTRL_REL_SHADOWS,\
+	}
+
 #define TIMING_STROBE_PROG_US		10	/* Min time to blow a fuse */
 #define TIMING_STROBE_READ_NS		37	/* Min time before read */
 #define TIMING_RELAX_NS			17
@@ -62,18 +70,31 @@ struct ocotp_priv {
 	struct nvmem_config *config;
 };
 
+struct ocotp_ctrl_reg {
+	u32 bm_addr;
+	u32 bm_busy;
+	u32 bm_error;
+	u32 bm_rel_shadows;
+};
+
 struct ocotp_params {
 	unsigned int nregs;
 	unsigned int bank_address_words;
 	void (*set_timing)(struct ocotp_priv *priv);
+	struct ocotp_ctrl_reg ctrl;
 };
 
-static int imx_ocotp_wait_for_busy(void __iomem *base, u32 flags)
+static int imx_ocotp_wait_for_busy(struct ocotp_priv *priv, u32 flags)
 {
 	int count;
 	u32 c, mask;
+	u32 bm_ctrl_busy, bm_ctrl_error;
+	void __iomem *base = priv->base;
 
-	mask = IMX_OCOTP_BM_CTRL_BUSY | IMX_OCOTP_BM_CTRL_ERROR | flags;
+	bm_ctrl_busy = priv->params->ctrl.bm_busy;
+	bm_ctrl_error = priv->params->ctrl.bm_error;
+
+	mask = bm_ctrl_busy | bm_ctrl_error | flags;
 
 	for (count = 10000; count >= 0; count--) {
 		c = readl(base + IMX_OCOTP_ADDR_CTRL);
@@ -97,7 +118,7 @@ static int imx_ocotp_wait_for_busy(void __iomem *base, u32 flags)
 		 * - A read is performed to from a fuse word which has been read
 		 *   locked.
 		 */
-		if (c & IMX_OCOTP_BM_CTRL_ERROR)
+		if (c & bm_ctrl_error)
 			return -EPERM;
 		return -ETIMEDOUT;
 	}
@@ -105,15 +126,18 @@ static int imx_ocotp_wait_for_busy(void __iomem *base, u32 flags)
 	return 0;
 }
 
-static void imx_ocotp_clr_err_if_set(void __iomem *base)
+static void imx_ocotp_clr_err_if_set(struct ocotp_priv *priv)
 {
-	u32 c;
+	u32 c, bm_ctrl_error;
+	void __iomem *base = priv->base;
+
+	bm_ctrl_error = priv->params->ctrl.bm_error;
 
 	c = readl(base + IMX_OCOTP_ADDR_CTRL);
-	if (!(c & IMX_OCOTP_BM_CTRL_ERROR))
+	if (!(c & bm_ctrl_error))
 		return;
 
-	writel(IMX_OCOTP_BM_CTRL_ERROR, base + IMX_OCOTP_ADDR_CTRL_CLR);
+	writel(bm_ctrl_error, base + IMX_OCOTP_ADDR_CTRL_CLR);
 }
 
 static int imx_ocotp_read(void *context, unsigned int offset,
@@ -140,7 +164,7 @@ static int imx_ocotp_read(void *context, unsigned int offset,
 		return ret;
 	}
 
-	ret = imx_ocotp_wait_for_busy(priv->base, 0);
+	ret = imx_ocotp_wait_for_busy(priv, 0);
 	if (ret < 0) {
 		dev_err(priv->dev, "timeout during read setup\n");
 		goto read_end;
@@ -157,7 +181,7 @@ static int imx_ocotp_read(void *context, unsigned int offset,
 		 * issued
 		 */
 		if (*(buf - 1) == IMX_OCOTP_READ_LOCKED_VAL)
-			imx_ocotp_clr_err_if_set(priv->base);
+			imx_ocotp_clr_err_if_set(priv);
 	}
 	ret = 0;
 
@@ -274,7 +298,7 @@ static int imx_ocotp_write(void *context, unsigned int offset, void *val,
 	 * write or reload must be completed before a write access can be
 	 * requested.
 	 */
-	ret = imx_ocotp_wait_for_busy(priv->base, 0);
+	ret = imx_ocotp_wait_for_busy(priv, 0);
 	if (ret < 0) {
 		dev_err(priv->dev, "timeout during timing setup\n");
 		goto write_end;
@@ -306,8 +330,8 @@ static int imx_ocotp_write(void *context, unsigned int offset, void *val,
 	}
 
 	ctrl = readl(priv->base + IMX_OCOTP_ADDR_CTRL);
-	ctrl &= ~IMX_OCOTP_BM_CTRL_ADDR;
-	ctrl |= waddr & IMX_OCOTP_BM_CTRL_ADDR;
+	ctrl &= ~priv->params->ctrl.bm_addr;
+	ctrl |= waddr & priv->params->ctrl.bm_addr;
 	ctrl |= IMX_OCOTP_WR_UNLOCK;
 
 	writel(ctrl, priv->base + IMX_OCOTP_ADDR_CTRL);
@@ -374,11 +398,11 @@ static int imx_ocotp_write(void *context, unsigned int offset, void *val,
 	 * be set. It must be cleared by software before any new write access
 	 * can be issued.
 	 */
-	ret = imx_ocotp_wait_for_busy(priv->base, 0);
+	ret = imx_ocotp_wait_for_busy(priv, 0);
 	if (ret < 0) {
 		if (ret == -EPERM) {
 			dev_err(priv->dev, "failed write to locked region");
-			imx_ocotp_clr_err_if_set(priv->base);
+			imx_ocotp_clr_err_if_set(priv);
 		} else {
 			dev_err(priv->dev, "timeout during data write\n");
 		}
@@ -394,10 +418,10 @@ static int imx_ocotp_write(void *context, unsigned int offset, void *val,
 	udelay(2);
 
 	/* reload all shadow registers */
-	writel(IMX_OCOTP_BM_CTRL_REL_SHADOWS,
+	writel(priv->params->ctrl.bm_rel_shadows,
 	       priv->base + IMX_OCOTP_ADDR_CTRL_SET);
-	ret = imx_ocotp_wait_for_busy(priv->base,
-				      IMX_OCOTP_BM_CTRL_REL_SHADOWS);
+	ret = imx_ocotp_wait_for_busy(priv,
+				      priv->params->ctrl.bm_rel_shadows);
 	if (ret < 0) {
 		dev_err(priv->dev, "timeout during shadow register reload\n");
 		goto write_end;
@@ -424,65 +448,76 @@ static const struct ocotp_params imx6q_params = {
 	.nregs = 128,
 	.bank_address_words = 0,
 	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
 };
 
 static const struct ocotp_params imx6sl_params = {
 	.nregs = 64,
 	.bank_address_words = 0,
 	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
 };
 
 static const struct ocotp_params imx6sll_params = {
 	.nregs = 128,
 	.bank_address_words = 0,
 	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
 };
 
 static const struct ocotp_params imx6sx_params = {
 	.nregs = 128,
 	.bank_address_words = 0,
 	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
 };
 
 static const struct ocotp_params imx6ul_params = {
 	.nregs = 128,
 	.bank_address_words = 0,
 	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
 };
 
 static const struct ocotp_params imx6ull_params = {
 	.nregs = 64,
 	.bank_address_words = 0,
 	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
 };
 
 static const struct ocotp_params imx7d_params = {
 	.nregs = 64,
 	.bank_address_words = 4,
 	.set_timing = imx_ocotp_set_imx7_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
 };
 
 static const struct ocotp_params imx7ulp_params = {
 	.nregs = 256,
 	.bank_address_words = 0,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
 };
 
 static const struct ocotp_params imx8mq_params = {
 	.nregs = 256,
 	.bank_address_words = 0,
 	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
 };
 
 static const struct ocotp_params imx8mm_params = {
 	.nregs = 256,
 	.bank_address_words = 0,
 	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
 };
 
 static const struct ocotp_params imx8mn_params = {
 	.nregs = 256,
 	.bank_address_words = 0,
 	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
 };
 
 static const struct of_device_id imx_ocotp_dt_ids[] = {
@@ -521,17 +556,17 @@ static int imx_ocotp_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->clk))
 		return PTR_ERR(priv->clk);
 
-	clk_prepare_enable(priv->clk);
-	imx_ocotp_clr_err_if_set(priv->base);
-	clk_disable_unprepare(priv->clk);
-
 	priv->params = of_device_get_match_data(&pdev->dev);
 	imx_ocotp_nvmem_config.size = 4 * priv->params->nregs;
 	imx_ocotp_nvmem_config.dev = dev;
 	imx_ocotp_nvmem_config.priv = priv;
 	priv->config = &imx_ocotp_nvmem_config;
-	nvmem = devm_nvmem_register(dev, &imx_ocotp_nvmem_config);
 
+	clk_prepare_enable(priv->clk);
+	imx_ocotp_clr_err_if_set(priv);
+	clk_disable_unprepare(priv->clk);
+
+	nvmem = devm_nvmem_register(dev, &imx_ocotp_nvmem_config);
 
 	return PTR_ERR_OR_ZERO(nvmem);
 }
diff --git a/drivers/nvmem/qcom-spmi-sdam.c b/drivers/nvmem/qcom-spmi-sdam.c
new file mode 100644
index 000000000000..8682cda448d6
--- /dev/null
+++ b/drivers/nvmem/qcom-spmi-sdam.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2017 The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/nvmem-provider.h>
+#include <linux/regmap.h>
+
+#define SDAM_MEM_START			0x40
+#define REGISTER_MAP_ID			0x40
+#define REGISTER_MAP_VERSION		0x41
+#define SDAM_SIZE			0x44
+#define SDAM_PBS_TRIG_SET		0xE5
+#define SDAM_PBS_TRIG_CLR		0xE6
+
+struct sdam_chip {
+	struct platform_device		*pdev;
+	struct regmap			*regmap;
+	struct nvmem_config		sdam_config;
+	unsigned int			base;
+	unsigned int			size;
+};
+
+/* read only register offsets */
+static const u8 sdam_ro_map[] = {
+	REGISTER_MAP_ID,
+	REGISTER_MAP_VERSION,
+	SDAM_SIZE
+};
+
+static bool sdam_is_valid(struct sdam_chip *sdam, unsigned int offset,
+				size_t len)
+{
+	unsigned int sdam_mem_end = SDAM_MEM_START + sdam->size - 1;
+
+	if (!len)
+		return false;
+
+	if (offset >= SDAM_MEM_START && offset <= sdam_mem_end
+				&& (offset + len - 1) <= sdam_mem_end)
+		return true;
+	else if ((offset == SDAM_PBS_TRIG_SET || offset == SDAM_PBS_TRIG_CLR)
+				&& (len == 1))
+		return true;
+
+	return false;
+}
+
+static bool sdam_is_ro(unsigned int offset, size_t len)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(sdam_ro_map); i++)
+		if (offset <= sdam_ro_map[i] && (offset + len) > sdam_ro_map[i])
+			return true;
+
+	return false;
+}
+
+static int sdam_read(void *priv, unsigned int offset, void *val,
+				size_t bytes)
+{
+	struct sdam_chip *sdam = priv;
+	struct device *dev = &sdam->pdev->dev;
+	int rc;
+
+	if (!sdam_is_valid(sdam, offset, bytes)) {
+		dev_err(dev, "Invalid SDAM offset %#x len=%zd\n",
+			offset, bytes);
+		return -EINVAL;
+	}
+
+	rc = regmap_bulk_read(sdam->regmap, sdam->base + offset, val, bytes);
+	if (rc < 0)
+		dev_err(dev, "Failed to read SDAM offset %#x len=%zd, rc=%d\n",
+						offset, bytes, rc);
+
+	return rc;
+}
+
+static int sdam_write(void *priv, unsigned int offset, void *val,
+				size_t bytes)
+{
+	struct sdam_chip *sdam = priv;
+	struct device *dev = &sdam->pdev->dev;
+	int rc;
+
+	if (!sdam_is_valid(sdam, offset, bytes)) {
+		dev_err(dev, "Invalid SDAM offset %#x len=%zd\n",
+			offset, bytes);
+		return -EINVAL;
+	}
+
+	if (sdam_is_ro(offset, bytes)) {
+		dev_err(dev, "Invalid write offset %#x len=%zd\n",
+			offset, bytes);
+		return -EINVAL;
+	}
+
+	rc = regmap_bulk_write(sdam->regmap, sdam->base + offset, val, bytes);
+	if (rc < 0)
+		dev_err(dev, "Failed to write SDAM offset %#x len=%zd, rc=%d\n",
+						offset, bytes, rc);
+
+	return rc;
+}
+
+static int sdam_probe(struct platform_device *pdev)
+{
+	struct sdam_chip *sdam;
+	struct nvmem_device *nvmem;
+	unsigned int val;
+	int rc;
+
+	sdam = devm_kzalloc(&pdev->dev, sizeof(*sdam), GFP_KERNEL);
+	if (!sdam)
+		return -ENOMEM;
+
+	sdam->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!sdam->regmap) {
+		dev_err(&pdev->dev, "Failed to get regmap handle\n");
+		return -ENXIO;
+	}
+
+	rc = of_property_read_u32(pdev->dev.of_node, "reg", &sdam->base);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "Failed to get SDAM base, rc=%d\n", rc);
+		return -EINVAL;
+	}
+
+	rc = regmap_read(sdam->regmap, sdam->base + SDAM_SIZE, &val);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "Failed to read SDAM_SIZE rc=%d\n", rc);
+		return -EINVAL;
+	}
+	sdam->size = val * 32;
+
+	sdam->sdam_config.dev = &pdev->dev;
+	sdam->sdam_config.name = "spmi_sdam";
+	sdam->sdam_config.id = pdev->id;
+	sdam->sdam_config.owner = THIS_MODULE,
+	sdam->sdam_config.stride = 1;
+	sdam->sdam_config.word_size = 1;
+	sdam->sdam_config.reg_read = sdam_read;
+	sdam->sdam_config.reg_write = sdam_write;
+	sdam->sdam_config.priv = sdam;
+
+	nvmem = devm_nvmem_register(&pdev->dev, &sdam->sdam_config);
+	if (IS_ERR(nvmem)) {
+		dev_err(&pdev->dev,
+			"Failed to register SDAM nvmem device rc=%ld\n",
+			PTR_ERR(nvmem));
+		return -ENXIO;
+	}
+	dev_dbg(&pdev->dev,
+		"SDAM base=%#x size=%u registered successfully\n",
+		sdam->base, sdam->size);
+
+	return 0;
+}
+
+static const struct of_device_id sdam_match_table[] = {
+	{ .compatible = "qcom,spmi-sdam" },
+	{},
+};
+
+static struct platform_driver sdam_driver = {
+	.driver = {
+		.name = "qcom,spmi-sdam",
+		.of_match_table = sdam_match_table,
+	},
+	.probe		= sdam_probe,
+};
+
+static int __init sdam_init(void)
+{
+	return platform_driver_register(&sdam_driver);
+}
+subsys_initcall(sdam_init);
+
+static void __exit sdam_exit(void)
+{
+	return platform_driver_unregister(&sdam_driver);
+}
+module_exit(sdam_exit);
+
+MODULE_DESCRIPTION("QCOM SPMI SDAM driver");
+MODULE_LICENSE("GPL v2");