diff options
| author | Wen Gong <wgong@codeaurora.org> | 2021-10-13 03:37:04 -0400 |
|---|---|---|
| committer | Kalle Valo <kvalo@codeaurora.org> | 2021-11-15 11:23:05 +0200 |
| commit | 78406044bdd0cc8987bc082b76867c63ab1c6af8 (patch) | |
| tree | 8d87af8cb79e2f62f914f4f2b95c0debba652dcd /drivers/net/wireless/ath/ath11k/mac.c | |
| parent | be8867cb47652418e488170785bd9ffbadae3f1f (diff) | |
| download | lwn-78406044bdd0cc8987bc082b76867c63ab1c6af8.tar.gz lwn-78406044bdd0cc8987bc082b76867c63ab1c6af8.zip | |
ath11k: enable IEEE80211_VHT_EXT_NSS_BW_CAPABLE if NSS ratio enabled
When NSS ratio enabled reported by firmware, SUPPORTS_VHT_EXT_NSS_BW
is set in ath11k, meanwhile IEEE80211_VHT_EXT_NSS_BW_CAPABLE also
need to be set, otherwise it is invalid because spec in IEEE Std
802.11™‐2020 as below.
Table 9-273-Supported VHT-MCS and NSS Set subfields, it has subfield
VHT Extended NSS BW Capable, its definition is:
Indicates whether the STA is capable of interpreting the Extended NSS
BW Support subfield of the VHT Capabilities Information field.
dmesg have a message without this patch:
ieee80211 phy0: copying sband (band 1) due to VHT EXT NSS BW flag
It means mac80211 will set IEEE80211_VHT_EXT_NSS_BW_CAPABLE if ath11k not
set it in ieee80211_register_hw(). So it is better to set it in ath11k.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211013073704.15888-1-wgong@codeaurora.org
Diffstat (limited to 'drivers/net/wireless/ath/ath11k/mac.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath11k/mac.c | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c index cec49468d615..659d3f387b21 100644 --- a/drivers/net/wireless/ath/ath11k/mac.c +++ b/drivers/net/wireless/ath/ath11k/mac.c @@ -4706,6 +4706,10 @@ ath11k_create_vht_cap(struct ath11k *ar, u32 rate_cap_tx_chainmask, vht_cap.vht_supported = 1; vht_cap.cap = ar->pdev->cap.vht_cap; + if (ar->pdev->cap.nss_ratio_enabled) + vht_cap.vht_mcs.tx_highest |= + cpu_to_le16(IEEE80211_VHT_EXT_NSS_BW_CAPABLE); + ath11k_set_vht_txbf_cap(ar, &vht_cap.cap); rxmcs_map = 0; |