Merge tag 'net-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from wireless, bpf and netfilter.

  Happy summer solstice! The line count is a bit inflated by a selftest
  and update to a driver's FW interface header, in reality this is
  slightly below average for us. We are expecting one driver fix from
  Intel, but there are no big known issues.

  Current release - regressions:

   - ipv6: bring NLM_DONE out to a separate recv() again

  Current release - new code bugs:

   - wifi: cfg80211: wext: set ssids=NULL for passive scans via old wext API

  Previous releases - regressions:

   - wifi: mac80211: fix monitor channel setting with chanctx emulation
     (probably most awaited of the fixes in this PR, tracked by Thorsten)

   - usb: ax88179_178a: bring back reset on init, if PHY is disconnected

   - bpf: fix UML x86_64 compile failure with BPF

   - bpf: avoid splat in pskb_pull_reason(), sanity check added can be hit
     with malicious BPF

   - eth: mvpp2: use slab_build_skb() for packets in slab, driver was
     missed during API refactoring

   - wifi: iwlwifi: add missing unlock of mvm mutex

  Previous releases - always broken:

   - ipv6: add a number of missing null-checks for in6_dev_get(), in case
     IPv6 disabling races with the datapath

   - bpf: fix reg_set_min_max corruption of fake_reg

   - sched: act_ct: add netns as part of the key of tcf_ct_flow_table"

* tag 'net-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
  net: usb: rtl8150 fix unintiatilzed variables in rtl8150_get_link_ksettings
  selftests: virtio_net: add forgotten config options
  bnxt_en: Restore PTP tx_avail count in case of skb_pad() error
  bnxt_en: Set TSO max segs on devices with limits
  bnxt_en: Update firmware interface to 1.10.3.44
  net: stmmac: Assign configured channel value to EXTTS event
  net: do not leave a dangling sk pointer, when socket creation fails
  net/tcp_ao: Don't leak ao_info on error-path
  ice: Fix VSI list rule with ICE_SW_LKUP_LAST type
  ipv6: bring NLM_DONE out to a separate recv() again
  selftests: add selftest for the SRv6 End.DX6 behavior with netfilter
  selftests: add selftest for the SRv6 End.DX4 behavior with netfilter
  netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core
  seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors
  netfilter: ipset: Fix suspicious rcu_dereference_protected()
  selftests: openvswitch: Set value to nla flags.
  octeontx2-pf: Fix linking objects into multiple modules
  octeontx2-pf: Add error handling to VLAN unoffload handling
  virtio_net: fixing XDP for fully checksummed packets handling
  virtio_net: checksum offloading handling fix
  ...

1 files changed, 40 insertions, 8 deletions

diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c
index 6be8a43c908a..e418539565b1 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.c
+++ b/drivers/net/ethernet/microchip/lan743x_main.c
@@ -3118,6 +3118,17 @@ static int lan743x_netdev_open(struct net_device *netdev)
 		if (ret)
 			goto close_tx;
 	}
+
+#ifdef CONFIG_PM
+	if (adapter->netdev->phydev) {
+		struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL };
+
+		phy_ethtool_get_wol(netdev->phydev, &wol);
+		adapter->phy_wol_supported = wol.supported;
+		adapter->phy_wolopts = wol.wolopts;
+	}
+#endif
+
 	return 0;
 
 close_tx:
@@ -3575,7 +3586,7 @@ static void lan743x_pm_set_wol(struct lan743x_adapter *adapter)
 
 	/* clear wake settings */
 	pmtctl = lan743x_csr_read(adapter, PMT_CTL);
-	pmtctl |= PMT_CTL_WUPS_MASK_;
+	pmtctl |= PMT_CTL_WUPS_MASK_ | PMT_CTL_RES_CLR_WKP_MASK_;
 	pmtctl &= ~(PMT_CTL_GPIO_WAKEUP_EN_ | PMT_CTL_EEE_WAKEUP_EN_ |
 		PMT_CTL_WOL_EN_ | PMT_CTL_MAC_D3_RX_CLK_OVR_ |
 		PMT_CTL_RX_FCT_RFE_D3_CLK_OVR_ | PMT_CTL_ETH_PHY_WAKE_EN_);
@@ -3587,10 +3598,9 @@ static void lan743x_pm_set_wol(struct lan743x_adapter *adapter)
 
 	pmtctl |= PMT_CTL_ETH_PHY_D3_COLD_OVR_ | PMT_CTL_ETH_PHY_D3_OVR_;
 
-	if (adapter->wolopts & WAKE_PHY) {
-		pmtctl |= PMT_CTL_ETH_PHY_EDPD_PLL_CTL_;
+	if (adapter->phy_wolopts)
 		pmtctl |= PMT_CTL_ETH_PHY_WAKE_EN_;
-	}
+
 	if (adapter->wolopts & WAKE_MAGIC) {
 		wucsr |= MAC_WUCSR_MPEN_;
 		macrx |= MAC_RX_RXEN_;
@@ -3686,7 +3696,7 @@ static int lan743x_pm_suspend(struct device *dev)
 	lan743x_csr_write(adapter, MAC_WUCSR2, 0);
 	lan743x_csr_write(adapter, MAC_WK_SRC, 0xFFFFFFFF);
 
-	if (adapter->wolopts)
+	if (adapter->wolopts || adapter->phy_wolopts)
 		lan743x_pm_set_wol(adapter);
 
 	if (adapter->is_pci11x1x) {
@@ -3710,6 +3720,7 @@ static int lan743x_pm_resume(struct device *dev)
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct lan743x_adapter *adapter = netdev_priv(netdev);
+	u32 data;
 	int ret;
 
 	pci_set_power_state(pdev, PCI_D0);
@@ -3728,6 +3739,30 @@ static int lan743x_pm_resume(struct device *dev)
 		return ret;
 	}
 
+	ret = lan743x_csr_read(adapter, MAC_WK_SRC);
+	netif_dbg(adapter, drv, adapter->netdev,
+		  "Wakeup source : 0x%08X\n", ret);
+
+	/* Clear the wol configuration and status bits. Note that
+	 * the status bits are "Write One to Clear (W1C)"
+	 */
+	data = MAC_WUCSR_EEE_TX_WAKE_ | MAC_WUCSR_EEE_RX_WAKE_ |
+	       MAC_WUCSR_RFE_WAKE_FR_ | MAC_WUCSR_PFDA_FR_ | MAC_WUCSR_WUFR_ |
+	       MAC_WUCSR_MPR_ | MAC_WUCSR_BCAST_FR_;
+	lan743x_csr_write(adapter, MAC_WUCSR, data);
+
+	data = MAC_WUCSR2_NS_RCD_ | MAC_WUCSR2_ARP_RCD_ |
+	       MAC_WUCSR2_IPV6_TCPSYN_RCD_ | MAC_WUCSR2_IPV4_TCPSYN_RCD_;
+	lan743x_csr_write(adapter, MAC_WUCSR2, data);
+
+	data = MAC_WK_SRC_ETH_PHY_WK_ | MAC_WK_SRC_IPV6_TCPSYN_RCD_WK_ |
+	       MAC_WK_SRC_IPV4_TCPSYN_RCD_WK_ | MAC_WK_SRC_EEE_TX_WK_ |
+	       MAC_WK_SRC_EEE_RX_WK_ | MAC_WK_SRC_RFE_FR_WK_ |
+	       MAC_WK_SRC_PFDA_FR_WK_ | MAC_WK_SRC_MP_FR_WK_ |
+	       MAC_WK_SRC_BCAST_FR_WK_ | MAC_WK_SRC_WU_FR_WK_ |
+	       MAC_WK_SRC_WK_FR_SAVED_;
+	lan743x_csr_write(adapter, MAC_WK_SRC, data);
+
 	/* open netdev when netdev is at running state while resume.
 	 * For instance, it is true when system wakesup after pm-suspend
 	 * However, it is false when system wakes up after suspend GUI menu
@@ -3736,9 +3771,6 @@ static int lan743x_pm_resume(struct device *dev)
 		lan743x_netdev_open(netdev);
 
 	netif_device_attach(netdev);
-	ret = lan743x_csr_read(adapter, MAC_WK_SRC);
-	netif_info(adapter, drv, adapter->netdev,
-		   "Wakeup source : 0x%08X\n", ret);
 
 	return 0;
 }