Merge tag 'for-linus-20160112' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "Generic MTD:

   - populate the MTD device 'of_node' field (and get a proper 'of_node'
     symlink in sysfs)

     This yielded some new helper functions, and changes across a
     variety of drivers

   - partitioning cleanups, to prepare for better device-tree based
     partitioning in the future

     Eliminate a lot of boilerplate for drivers that want to use
     OF-based partition parsing

     The DT bindings for this didn't settle yet, so most non-cleanup
     portions are deferred for a future release

  NAND:

   - embed a struct mtd_info inside struct nand_chip

     This is really long overdue; too many drivers have to do the same
     silly boilerplate to allocate and link up two "independent"
     structs, when in fact, everyone is assuming there is an exact 1:1
     relationship between a NAND chips struct and its underlying MTD.
     This aids improved helpers and should make certain abstractions
     easier in the future.

     Also causes a lot of churn, helped along by some automated code
     transformations

   - add more core support for detecting (and "correcting") bitflips in
     erased pages; requires opt-in by drivers, but at least we kill a
     few bad implementations and hopefully stave off future ones

   - pxa3xx_nand: cleanups, a few fixes, and PM improvements

   - new JZ4780 NAND driver

  SPI NOR:

   - provide default erase function, for controllers that just want to
     send the SECTOR_ERASE command directly

   - fix some module auto-loading issues with device tree
     ("jedec,spi-nor")

   - error handling fixes

   - new Mediatek QSPI flash driver

  Other:

   - cfi: force valid geometry Kconfig (finally!)

     This one used to trip up randconfigs occasionally, since bots
     aren't deterred by big scary "advanced configuration" menus

  More? Probably. See the commit logs"

* tag 'for-linus-20160112' of git://git.infradead.org/linux-mtd: (168 commits)
  mtd: jz4780_nand: replace if/else blocks with switch/case
  mtd: nand: jz4780: Update ecc correction error codes
  mtd: nandsim: use nand_get_controller_data()
  mtd: jz4780_nand: remove useless mtd->priv = chip assignment
  staging: mt29f_spinand: make use of nand_set/get_controller_data() helpers
  mtd: nand: make use of nand_set/get_controller_data() helpers
  ARM: make use of nand_set/get_controller_data() helpers
  mtd: nand: add helpers to access ->priv
  mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs
  mtd: nand: jz4740: remove custom 'erased check' implementation
  mtd: nand: diskonchip: remove custom 'erased check' implementation
  mtd: nand: davinci: remove custom 'erased check' implementation
  mtd: nand: use nand_check_erased_ecc_chunk in default ECC read functions
  mtd: nand: return consistent error codes in ecc.correct() implementations
  doc: dt: mtd: new binding for jz4780-{nand,bch}
  mtd: cfi_cmdset_0001: fixing memory leak and handling failed kmalloc
  mtd: spi-nor: wait until lock/unlock operations are ready
  mtd: tests: consolidate kmalloc/memset 0 call to kzalloc
  jffs2: use to_delayed_work
  mtd: nand: assign reasonable default name for NAND drivers
  ...

1 files changed, 381 insertions, 0 deletions

diff --git a/drivers/mtd/nand/jz4780_bch.c b/drivers/mtd/nand/jz4780_bch.c
new file mode 100644
index 000000000000..755499c6650e
--- /dev/null
+++ b/drivers/mtd/nand/jz4780_bch.c
@@ -0,0 +1,381 @@
+/*
+ * JZ4780 BCH controller
+ *
+ * Copyright (c) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include "jz4780_bch.h"
+
+#define BCH_BHCR			0x0
+#define BCH_BHCCR			0x8
+#define BCH_BHCNT			0xc
+#define BCH_BHDR			0x10
+#define BCH_BHPAR0			0x14
+#define BCH_BHERR0			0x84
+#define BCH_BHINT			0x184
+#define BCH_BHINTES			0x188
+#define BCH_BHINTEC			0x18c
+#define BCH_BHINTE			0x190
+
+#define BCH_BHCR_BSEL_SHIFT		4
+#define BCH_BHCR_BSEL_MASK		(0x7f << BCH_BHCR_BSEL_SHIFT)
+#define BCH_BHCR_ENCE			BIT(2)
+#define BCH_BHCR_INIT			BIT(1)
+#define BCH_BHCR_BCHE			BIT(0)
+
+#define BCH_BHCNT_PARITYSIZE_SHIFT	16
+#define BCH_BHCNT_PARITYSIZE_MASK	(0x7f << BCH_BHCNT_PARITYSIZE_SHIFT)
+#define BCH_BHCNT_BLOCKSIZE_SHIFT	0
+#define BCH_BHCNT_BLOCKSIZE_MASK	(0x7ff << BCH_BHCNT_BLOCKSIZE_SHIFT)
+
+#define BCH_BHERR_MASK_SHIFT		16
+#define BCH_BHERR_MASK_MASK		(0xffff << BCH_BHERR_MASK_SHIFT)
+#define BCH_BHERR_INDEX_SHIFT		0
+#define BCH_BHERR_INDEX_MASK		(0x7ff << BCH_BHERR_INDEX_SHIFT)
+
+#define BCH_BHINT_ERRC_SHIFT		24
+#define BCH_BHINT_ERRC_MASK		(0x7f << BCH_BHINT_ERRC_SHIFT)
+#define BCH_BHINT_TERRC_SHIFT		16
+#define BCH_BHINT_TERRC_MASK		(0x7f << BCH_BHINT_TERRC_SHIFT)
+#define BCH_BHINT_DECF			BIT(3)
+#define BCH_BHINT_ENCF			BIT(2)
+#define BCH_BHINT_UNCOR			BIT(1)
+#define BCH_BHINT_ERR			BIT(0)
+
+#define BCH_CLK_RATE			(200 * 1000 * 1000)
+
+/* Timeout for BCH calculation/correction. */
+#define BCH_TIMEOUT_US			100000
+
+struct jz4780_bch {
+	struct device *dev;
+	void __iomem *base;
+	struct clk *clk;
+	struct mutex lock;
+};
+
+static void jz4780_bch_init(struct jz4780_bch *bch,
+			    struct jz4780_bch_params *params, bool encode)
+{
+	u32 reg;
+
+	/* Clear interrupt status. */
+	writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
+
+	/* Set up BCH count register. */
+	reg = params->size << BCH_BHCNT_BLOCKSIZE_SHIFT;
+	reg |= params->bytes << BCH_BHCNT_PARITYSIZE_SHIFT;
+	writel(reg, bch->base + BCH_BHCNT);
+
+	/* Initialise and enable BCH. */
+	reg = BCH_BHCR_BCHE | BCH_BHCR_INIT;
+	reg |= params->strength << BCH_BHCR_BSEL_SHIFT;
+	if (encode)
+		reg |= BCH_BHCR_ENCE;
+	writel(reg, bch->base + BCH_BHCR);
+}
+
+static void jz4780_bch_disable(struct jz4780_bch *bch)
+{
+	writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
+	writel(BCH_BHCR_BCHE, bch->base + BCH_BHCCR);
+}
+
+static void jz4780_bch_write_data(struct jz4780_bch *bch, const void *buf,
+				  size_t size)
+{
+	size_t size32 = size / sizeof(u32);
+	size_t size8 = size % sizeof(u32);
+	const u32 *src32;
+	const u8 *src8;
+
+	src32 = (const u32 *)buf;
+	while (size32--)
+		writel(*src32++, bch->base + BCH_BHDR);
+
+	src8 = (const u8 *)src32;
+	while (size8--)
+		writeb(*src8++, bch->base + BCH_BHDR);
+}
+
+static void jz4780_bch_read_parity(struct jz4780_bch *bch, void *buf,
+				   size_t size)
+{
+	size_t size32 = size / sizeof(u32);
+	size_t size8 = size % sizeof(u32);
+	u32 *dest32;
+	u8 *dest8;
+	u32 val, offset = 0;
+
+	dest32 = (u32 *)buf;
+	while (size32--) {
+		*dest32++ = readl(bch->base + BCH_BHPAR0 + offset);
+		offset += sizeof(u32);
+	}
+
+	dest8 = (u8 *)dest32;
+	val = readl(bch->base + BCH_BHPAR0 + offset);
+	switch (size8) {
+	case 3:
+		dest8[2] = (val >> 16) & 0xff;
+	case 2:
+		dest8[1] = (val >> 8) & 0xff;
+	case 1:
+		dest8[0] = val & 0xff;
+		break;
+	}
+}
+
+static bool jz4780_bch_wait_complete(struct jz4780_bch *bch, unsigned int irq,
+				     u32 *status)
+{
+	u32 reg;
+	int ret;
+
+	/*
+	 * While we could use interrupts here and sleep until the operation
+	 * completes, the controller works fairly quickly (usually a few
+	 * microseconds) and so the overhead of sleeping until we get an
+	 * interrupt quite noticeably decreases performance.
+	 */
+	ret = readl_poll_timeout(bch->base + BCH_BHINT, reg,
+				 (reg & irq) == irq, 0, BCH_TIMEOUT_US);
+	if (ret)
+		return false;
+
+	if (status)
+		*status = reg;
+
+	writel(reg, bch->base + BCH_BHINT);
+	return true;
+}
+
+/**
+ * jz4780_bch_calculate() - calculate ECC for a data buffer
+ * @bch: BCH device.
+ * @params: BCH parameters.
+ * @buf: input buffer with raw data.
+ * @ecc_code: output buffer with ECC.
+ *
+ * Return: 0 on success, -ETIMEDOUT if timed out while waiting for BCH
+ * controller.
+ */
+int jz4780_bch_calculate(struct jz4780_bch *bch, struct jz4780_bch_params *params,
+			 const u8 *buf, u8 *ecc_code)
+{
+	int ret = 0;
+
+	mutex_lock(&bch->lock);
+	jz4780_bch_init(bch, params, true);
+	jz4780_bch_write_data(bch, buf, params->size);
+
+	if (jz4780_bch_wait_complete(bch, BCH_BHINT_ENCF, NULL)) {
+		jz4780_bch_read_parity(bch, ecc_code, params->bytes);
+	} else {
+		dev_err(bch->dev, "timed out while calculating ECC\n");
+		ret = -ETIMEDOUT;
+	}
+
+	jz4780_bch_disable(bch);
+	mutex_unlock(&bch->lock);
+	return ret;
+}
+EXPORT_SYMBOL(jz4780_bch_calculate);
+
+/**
+ * jz4780_bch_correct() - detect and correct bit errors
+ * @bch: BCH device.
+ * @params: BCH parameters.
+ * @buf: raw data read from the chip.
+ * @ecc_code: ECC read from the chip.
+ *
+ * Given the raw data and the ECC read from the NAND device, detects and
+ * corrects errors in the data.
+ *
+ * Return: the number of bit errors corrected, -EBADMSG if there are too many
+ * errors to correct or -ETIMEDOUT if we timed out waiting for the controller.
+ */
+int jz4780_bch_correct(struct jz4780_bch *bch, struct jz4780_bch_params *params,
+		       u8 *buf, u8 *ecc_code)
+{
+	u32 reg, mask, index;
+	int i, ret, count;
+
+	mutex_lock(&bch->lock);
+
+	jz4780_bch_init(bch, params, false);
+	jz4780_bch_write_data(bch, buf, params->size);
+	jz4780_bch_write_data(bch, ecc_code, params->bytes);
+
+	if (!jz4780_bch_wait_complete(bch, BCH_BHINT_DECF, &reg)) {
+		dev_err(bch->dev, "timed out while correcting data\n");
+		ret = -ETIMEDOUT;
+		goto out;
+	}
+
+	if (reg & BCH_BHINT_UNCOR) {
+		dev_warn(bch->dev, "uncorrectable ECC error\n");
+		ret = -EBADMSG;
+		goto out;
+	}
+
+	/* Correct any detected errors. */
+	if (reg & BCH_BHINT_ERR) {
+		count = (reg & BCH_BHINT_ERRC_MASK) >> BCH_BHINT_ERRC_SHIFT;
+		ret = (reg & BCH_BHINT_TERRC_MASK) >> BCH_BHINT_TERRC_SHIFT;
+
+		for (i = 0; i < count; i++) {
+			reg = readl(bch->base + BCH_BHERR0 + (i * 4));
+			mask = (reg & BCH_BHERR_MASK_MASK) >>
+						BCH_BHERR_MASK_SHIFT;
+			index = (reg & BCH_BHERR_INDEX_MASK) >>
+						BCH_BHERR_INDEX_SHIFT;
+			buf[(index * 2) + 0] ^= mask;
+			buf[(index * 2) + 1] ^= mask >> 8;
+		}
+	} else {
+		ret = 0;
+	}
+
+out:
+	jz4780_bch_disable(bch);
+	mutex_unlock(&bch->lock);
+	return ret;
+}
+EXPORT_SYMBOL(jz4780_bch_correct);
+
+/**
+ * jz4780_bch_get() - get the BCH controller device
+ * @np: BCH device tree node.
+ *
+ * Gets the BCH controller device from the specified device tree node. The
+ * device must be released with jz4780_bch_release() when it is no longer being
+ * used.
+ *
+ * Return: a pointer to jz4780_bch, errors are encoded into the pointer.
+ * PTR_ERR(-EPROBE_DEFER) if the device hasn't been initialised yet.
+ */
+static struct jz4780_bch *jz4780_bch_get(struct device_node *np)
+{
+	struct platform_device *pdev;
+	struct jz4780_bch *bch;
+
+	pdev = of_find_device_by_node(np);
+	if (!pdev || !platform_get_drvdata(pdev))
+		return ERR_PTR(-EPROBE_DEFER);
+
+	get_device(&pdev->dev);
+
+	bch = platform_get_drvdata(pdev);
+	clk_prepare_enable(bch->clk);
+
+	bch->dev = &pdev->dev;
+	return bch;
+}
+
+/**
+ * of_jz4780_bch_get() - get the BCH controller from a DT node
+ * @of_node: the node that contains a bch-controller property.
+ *
+ * Get the bch-controller property from the given device tree
+ * node and pass it to jz4780_bch_get to do the work.
+ *
+ * Return: a pointer to jz4780_bch, errors are encoded into the pointer.
+ * PTR_ERR(-EPROBE_DEFER) if the device hasn't been initialised yet.
+ */
+struct jz4780_bch *of_jz4780_bch_get(struct device_node *of_node)
+{
+	struct jz4780_bch *bch = NULL;
+	struct device_node *np;
+
+	np = of_parse_phandle(of_node, "ingenic,bch-controller", 0);
+
+	if (np) {
+		bch = jz4780_bch_get(np);
+		of_node_put(np);
+	}
+	return bch;
+}
+EXPORT_SYMBOL(of_jz4780_bch_get);
+
+/**
+ * jz4780_bch_release() - release the BCH controller device
+ * @bch: BCH device.
+ */
+void jz4780_bch_release(struct jz4780_bch *bch)
+{
+	clk_disable_unprepare(bch->clk);
+	put_device(bch->dev);
+}
+EXPORT_SYMBOL(jz4780_bch_release);
+
+static int jz4780_bch_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct jz4780_bch *bch;
+	struct resource *res;
+
+	bch = devm_kzalloc(dev, sizeof(*bch), GFP_KERNEL);
+	if (!bch)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	bch->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(bch->base))
+		return PTR_ERR(bch->base);
+
+	jz4780_bch_disable(bch);
+
+	bch->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(bch->clk)) {
+		dev_err(dev, "failed to get clock: %ld\n", PTR_ERR(bch->clk));
+		return PTR_ERR(bch->clk);
+	}
+
+	clk_set_rate(bch->clk, BCH_CLK_RATE);
+
+	mutex_init(&bch->lock);
+
+	bch->dev = dev;
+	platform_set_drvdata(pdev, bch);
+
+	return 0;
+}
+
+static const struct of_device_id jz4780_bch_dt_match[] = {
+	{ .compatible = "ingenic,jz4780-bch" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, jz4780_bch_dt_match);
+
+static struct platform_driver jz4780_bch_driver = {
+	.probe		= jz4780_bch_probe,
+	.driver	= {
+		.name	= "jz4780-bch",
+		.of_match_table = of_match_ptr(jz4780_bch_dt_match),
+	},
+};
+module_platform_driver(jz4780_bch_driver);
+
+MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
+MODULE_AUTHOR("Harvey Hunt <harvey.hunt@imgtec.com>");
+MODULE_DESCRIPTION("Ingenic JZ4780 BCH error correction driver");
+MODULE_LICENSE("GPL v2");