diff options
| author | Yangbo Lu <yangbo.lu@nxp.com> | 2018-11-23 11:15:34 +0800 |
|---|---|---|
| committer | Ulf Hansson <ulf.hansson@linaro.org> | 2018-12-17 08:26:24 +0100 |
| commit | 54e08d9a95ca54a192a9aef76742a4f7e81f6780 (patch) | |
| tree | 6fe5624e8376f7d9f609b95be06a021ed1949c98 /drivers/mmc/host/sdhci-esdhc.h | |
| parent | cc14eec0889bb06abab3d6ea1e0e0676521542c8 (diff) | |
| download | lwn-54e08d9a95ca54a192a9aef76742a4f7e81f6780.tar.gz lwn-54e08d9a95ca54a192a9aef76742a4f7e81f6780.zip | |
mmc: sdhci-of-esdhc: add hs400 mode support
1. Perform the Tuning Process at the HS400 target operating frequency.
Latched the clock division value.
2. if read transaction, then set the SDTIMNGCTL[FLW_CTL_BG].
3. Switch to High Speed mode and then set the card clock frequency to
a value not greater than 52Mhz
4. Clear TBCTL[TB_EN],tuning block enable bit.
5. Change to 8 bit DDR Mode
6. Switch the card to HS400 mode.
7. Set TBCTL[TB_EN], tuning block enable bit.
8. Clear SYSCTL[SDCLKEN]
9. Wait for PRSSTAT[SDSTB] to be set
10. Change the clock division to latched value.Set TBCTL[HS 400 mode]
and Set SDCLKCTL[CMD_CLK_CTRL]
11. Set SYSCTL[SDCLKEN]
12. Wait for PRSSTAT[SDSTB] to be set
13. Set DLLCFG0[DLL_ENABLE] and DLLCFG0[DLL_FREQ_SEL].
14. Wait for delay chain to lock.
15. Set TBCTL[HS400_WNDW_ADJUST]
16. Again clear SYSCTL[SDCLKEN]
17. Wait for PRSSTAT[SDSTB] to be set
18. Set ESDHCCTL[FAF]
19. Wait for ESDHCCTL[FAF] to be cleared
20. Set SYSCTL[SDCLKEN]
21. Wait for PRSSTAT[SDSTB] to be set.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/mmc/host/sdhci-esdhc.h')
| -rw-r--r-- | drivers/mmc/host/sdhci-esdhc.h | 20 |
1 files changed, 20 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h index 3f16d9c90ba2..721a635b10e7 100644 --- a/drivers/mmc/host/sdhci-esdhc.h +++ b/drivers/mmc/host/sdhci-esdhc.h @@ -59,9 +59,29 @@ /* Tuning Block Control Register */ #define ESDHC_TBCTL 0x120 +#define ESDHC_HS400_WNDW_ADJUST 0x00000040 +#define ESDHC_HS400_MODE 0x00000010 #define ESDHC_TB_EN 0x00000004 #define ESDHC_TBPTR 0x128 +/* SD Clock Control Register */ +#define ESDHC_SDCLKCTL 0x144 +#define ESDHC_LPBK_CLK_SEL 0x80000000 +#define ESDHC_CMD_CLK_CTL 0x00008000 + +/* SD Timing Control Register */ +#define ESDHC_SDTIMNGCTL 0x148 +#define ESDHC_FLW_CTL_BG 0x00008000 + +/* DLL Config 0 Register */ +#define ESDHC_DLLCFG0 0x160 +#define ESDHC_DLL_ENABLE 0x80000000 +#define ESDHC_DLL_FREQ_SEL 0x08000000 + +/* DLL Status 0 Register */ +#define ESDHC_DLLSTAT0 0x170 +#define ESDHC_DLL_STS_SLV_LOCK 0x08000000 + /* Control Register for DMA transfer */ #define ESDHC_DMA_SYSCTL 0x40c #define ESDHC_PERIPHERAL_CLK_SEL 0x00080000 |