Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "This contains cleanups as preparation for other branches adding new
  features, we pulled 16 branches for 9 platforms into this one.

  Most notable here is the removal of support for ATAGS based OMAP4
  systems.  Since all OMAP4 machines are fully functional with DT based
  booting in 3.10, we can remove a lot of code here.

  Also noteworthy is Maxime Ripard's cleanup of the machine descriptors,
  which means we need no machine descriptors in a lot more cases and can
  boot additional machines by just having the respective device drivers
  enabled."

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits)
  ARM: picoxcell: remove .nr_irqs reference
  ARM: s5p64x0: avoid build warning for uncompress.h
  ARM: SAMSUNG: Remove unused plat/regs-watchdog.h header
  ARM: SAMSUNG: Remove legacy watchdog reset code
  ARM: SAMSUNG: Let platforms use the new watchdog reset driver
  ARM: SAMSUNG: Add watchdog reset driver
  ARM: SAMSUNG: Use local definitions of watchdog registers
  watchdog: s3c2410_wdt: Use local register definitions
  ARM: S5P64X0: Use common uncompress.h part for plat-samsung
  ARM: SAMSUNG: Consolidate uncompress subroutine
  ARM: at91: drop rm9200dk board support
  ARM: dts: msm: Fix merge resolution
  ARM: OMAP1: Remove dma.h
  ARM: OMAP1: Remove legacy irda.h and irda setup from board files
  ARM: OMAP1: Remove duplicated DMA channel definitions
  ARM: OMAP1: Remove McBSP DMA channel definitions
  ARM: OMAP2+: Remove dma.h
  ARM: OMAP2+: hwmod: Remove remaining DMA channel definitions
  ARM: OMAP2+: Remove duplicated DMA channel definitions
  ARM: OMAP2+: Remove AES crypto device DMA channel definitions
  ...

1 files changed, 141 insertions, 138 deletions

diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 1145ac330fb7..af91599488e9 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -9,7 +9,10 @@
  * Licensed under GPLv2 or later.
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Atmel AT91SAM9x5 family SoC";
@@ -85,32 +88,32 @@
 			pit: timer@fffffe30 {
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffe30 0xf>;
-				interrupts = <1 4 7>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 			};
 
 			tcb0: timer@f8008000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf8008000 0x100>;
-				interrupts = <17 4 0>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
 			};
 
 			tcb1: timer@f800c000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf800c000 0x100>;
-				interrupts = <17 4 0>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
 			};
 
 			dma0: dma-controller@ffffec00 {
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffec00 0x200>;
-				interrupts = <20 4 0>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
 			};
 
 			dma1: dma-controller@ffffee00 {
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffee00 0x200>;
-				interrupts = <21 4 0>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
 			};
 
@@ -124,297 +127,297 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<0 9 0x1 0x0	/* PA9 periph A */
-							 0 10 0x1 0x1>;	/* PA10 periph A with pullup */
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA9 periph A */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA10 periph A with pullup */
 					};
 				};
 
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<0 0 0x1 0x1	/* PA0 periph A with pullup */
-							 0 1 0x1 0x0>;	/* PA1 periph A */
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA0 periph A with pullup */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA1 periph A */
 					};
 
 					pinctrl_usart0_rts: usart0_rts-0 {
 						atmel,pins =
-							<0 2 0x1 0x0>;	/* PA2 periph A */
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A */
 					};
 
 					pinctrl_usart0_cts: usart0_cts-0 {
 						atmel,pins =
-							<0 3 0x1 0x0>;	/* PA3 periph A */
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA3 periph A */
 					};
 
 					pinctrl_usart0_sck: usart0_sck-0 {
 						atmel,pins =
-							<0 4 0x1 0x0>;	/* PA4 periph A */
+							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA4 periph A */
 					};
 				};
 
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<0 5 0x1 0x1	/* PA5 periph A with pullup */
-							 0 6 0x1 0x0>;	/* PA6 periph A */
+							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA5 periph A with pullup */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA6 periph A */
 					};
 
 					pinctrl_usart1_rts: usart1_rts-0 {
 						atmel,pins =
-							<2 27 0x3 0x0>;	/* PC27 periph C */
+							<AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC27 periph C */
 					};
 
 					pinctrl_usart1_cts: usart1_cts-0 {
 						atmel,pins =
-							<2 28 0x3 0x0>;	/* PC28 periph C */
+							<AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC28 periph C */
 					};
 
 					pinctrl_usart1_sck: usart1_sck-0 {
 						atmel,pins =
-							<2 28 0x3 0x0>;	/* PC29 periph C */
+							<AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC29 periph C */
 					};
 				};
 
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<0 7 0x1 0x1	/* PA7 periph A with pullup */
-							 0 8 0x1 0x0>;	/* PA8 periph A */
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA7 periph A with pullup */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA8 periph A */
 					};
 
 					pinctrl_uart2_rts: uart2_rts-0 {
 						atmel,pins =
-							<1 0 0x2 0x0>;	/* PB0 periph B */
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
 					};
 
 					pinctrl_uart2_cts: uart2_cts-0 {
 						atmel,pins =
-							<1 1 0x2 0x0>;	/* PB1 periph B */
+							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
 					};
 
 					pinctrl_usart2_sck: usart2_sck-0 {
 						atmel,pins =
-							<1 2 0x2 0x0>;	/* PB2 periph B */
+							<AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB2 periph B */
 					};
 				};
 
 				usart3 {
 					pinctrl_usart3: usart3-0 {
 						atmel,pins =
-							<2 22 0x2 0x1	/* PC22 periph B with pullup */
-							 2 23 0x2 0x0>;	/* PC23 periph B */
+							<AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PC22 periph B with pullup */
+							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC23 periph B */
 					};
 
 					pinctrl_usart3_rts: usart3_rts-0 {
 						atmel,pins =
-							<2 24 0x2 0x0>;	/* PC24 periph B */
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC24 periph B */
 					};
 
 					pinctrl_usart3_cts: usart3_cts-0 {
 						atmel,pins =
-							<2 25 0x2 0x0>;	/* PC25 periph B */
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC25 periph B */
 					};
 
 					pinctrl_usart3_sck: usart3_sck-0 {
 						atmel,pins =
-							<2 26 0x2 0x0>;	/* PC26 periph B */
+							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC26 periph B */
 					};
 				};
 
 				uart0 {
 					pinctrl_uart0: uart0-0 {
 						atmel,pins =
-							<2 8 0x3 0x0	/* PC8 periph C */
-							 2 9 0x3 0x1>;	/* PC9 periph C with pullup */
+							<AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC8 periph C */
+							 AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;	/* PC9 periph C with pullup */
 					};
 				};
 
 				uart1 {
 					pinctrl_uart1: uart1-0 {
 						atmel,pins =
-							<2 16 0x3 0x0	/* PC16 periph C */
-							 2 17 0x3 0x1>;	/* PC17 periph C with pullup */
+							<AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC16 periph C */
+							 AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;	/* PC17 periph C with pullup */
 					};
 				};
 
 				nand {
 					pinctrl_nand: nand-0 {
 						atmel,pins =
-							<3 0 0x1 0x0	/* PD0 periph A Read Enable */
-							 3 1 0x1 0x0	/* PD1 periph A Write Enable */
-							 3 2 0x1 0x0	/* PD2 periph A Address Latch Enable */
-							 3 3 0x1 0x0	/* PD3 periph A Command Latch Enable */
-							 3 4 0x0 0x1	/* PD4 gpio Chip Enable pin pull_up */
-							 3 5 0x0 0x1	/* PD5 gpio RDY/BUSY pin pull_up */
-							 3 6 0x1 0x0	/* PD6 periph A Data bit 0 */
-							 3 7 0x1 0x0	/* PD7 periph A Data bit 1 */
-							 3 8 0x1 0x0	/* PD8 periph A Data bit 2 */
-							 3 9 0x1 0x0	/* PD9 periph A Data bit 3 */
-							 3 10 0x1 0x0	/* PD10 periph A Data bit 4 */
-							 3 11 0x1 0x0	/* PD11 periph A Data bit 5 */
-							 3 12 0x1 0x0	/* PD12 periph A Data bit 6 */
-							 3 13 0x1 0x0>;	/* PD13 periph A Data bit 7 */
+							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD0 periph A Read Enable */
+							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD1 periph A Write Enable */
+							 AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD2 periph A Address Latch Enable */
+							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD3 periph A Command Latch Enable */
+							 AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP	/* PD4 gpio Chip Enable pin pull_up */
+							 AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP	/* PD5 gpio RDY/BUSY pin pull_up */
+							 AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD6 periph A Data bit 0 */
+							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD7 periph A Data bit 1 */
+							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD8 periph A Data bit 2 */
+							 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD9 periph A Data bit 3 */
+							 AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD10 periph A Data bit 4 */
+							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD11 periph A Data bit 5 */
+							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD12 periph A Data bit 6 */
+							 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD13 periph A Data bit 7 */
 					};
 
 					pinctrl_nand_16bits: nand_16bits-0 {
 						atmel,pins =
-							<3 14 0x1 0x0	/* PD14 periph A Data bit 8 */
-							 3 15 0x1 0x0	/* PD15 periph A Data bit 9 */
-							 3 16 0x1 0x0	/* PD16 periph A Data bit 10 */
-							 3 17 0x1 0x0	/* PD17 periph A Data bit 11 */
-							 3 18 0x1 0x0	/* PD18 periph A Data bit 12 */
-							 3 19 0x1 0x0	/* PD19 periph A Data bit 13 */
-							 3 20 0x1 0x0	/* PD20 periph A Data bit 14 */
-							 3 21 0x1 0x0>;	/* PD21 periph A Data bit 15 */
+							<AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD14 periph A Data bit 8 */
+							 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD15 periph A Data bit 9 */
+							 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD16 periph A Data bit 10 */
+							 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD17 periph A Data bit 11 */
+							 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD18 periph A Data bit 12 */
+							 AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD19 periph A Data bit 13 */
+							 AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD20 periph A Data bit 14 */
+							 AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD21 periph A Data bit 15 */
 					};
 				};
 
 				macb0 {
 					pinctrl_macb0_rmii: macb0_rmii-0 {
 						atmel,pins =
-							<1 0 0x1 0x0	/* PB0 periph A */
-							 1 1 0x1 0x0	/* PB1 periph A */
-							 1 2 0x1 0x0	/* PB2 periph A */
-							 1 3 0x1 0x0	/* PB3 periph A */
-							 1 4 0x1 0x0	/* PB4 periph A */
-							 1 5 0x1 0x0	/* PB5 periph A */
-							 1 6 0x1 0x0	/* PB6 periph A */
-							 1 7 0x1 0x0	/* PB7 periph A */
-							 1 9 0x1 0x0	/* PB9 periph A */
-							 1 10 0x1 0x0>;	/* PB10 periph A */
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
+							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
+							 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
 					};
 
 					pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
 						atmel,pins =
-							<1 8 0x1 0x0	/* PB8 periph A */
-							 1 11 0x1 0x0	/* PB11 periph A */
-							 1 12 0x1 0x0	/* PB12 periph A */
-							 1 13 0x1 0x0	/* PB13 periph A */
-							 1 14 0x1 0x0	/* PB14 periph A */
-							 1 15 0x1 0x0	/* PB15 periph A */
-							 1 16 0x1 0x0	/* PB16 periph A */
-							 1 17 0x1 0x0>;	/* PB17 periph A */
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB8 periph A */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A */
+							 AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A */
+							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A */
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB17 periph A */
 					};
 				};
 
 				mmc0 {
 					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
 						atmel,pins =
-							<0 17 0x1 0x0	/* PA17 periph A */
-							 0 16 0x1 0x1	/* PA16 periph A with pullup */
-							 0 15 0x1 0x1>;	/* PA15 periph A with pullup */
+							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA16 periph A with pullup */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA15 periph A with pullup */
 					};
 
 					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
 						atmel,pins =
-							<0 18 0x1 0x1	/* PA18 periph A with pullup */
-							 0 19 0x1 0x1	/* PA19 periph A with pullup */
-							 0 20 0x1 0x1>;	/* PA20 periph A with pullup */
+							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA18 periph A with pullup */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA19 periph A with pullup */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA20 periph A with pullup */
 					};
 				};
 
 				mmc1 {
 					pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
 						atmel,pins =
-							<0 13 0x2 0x0	/* PA13 periph B */
-							 0 12 0x2 0x1	/* PA12 periph B with pullup */
-							 0 11 0x2 0x1>;	/* PA11 periph B with pullup */
+							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA13 periph B */
+							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA12 periph B with pullup */
+							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA11 periph B with pullup */
 					};
 
 					pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
 						atmel,pins =
-							<0 2 0x2 0x1	/* PA2 periph B with pullup */
-							 0 3 0x2 0x1	/* PA3 periph B with pullup */
-							 0 4 0x2 0x1>;	/* PA4 periph B with pullup */
+							<AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA2 periph B with pullup */
+							 AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA3 periph B with pullup */
+							 AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA4 periph B with pullup */
 					};
 				};
 
 				ssc0 {
 					pinctrl_ssc0_tx: ssc0_tx-0 {
 						atmel,pins =
-							<0 24 0x2 0x0	/* PA24 periph B */
-							 0 25 0x2 0x0	/* PA25 periph B */
-							 0 26 0x2 0x0>;	/* PA26 periph B */
+							<AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA24 periph B */
+							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
+							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA26 periph B */
 					};
 
 					pinctrl_ssc0_rx: ssc0_rx-0 {
 						atmel,pins =
-							<0 27 0x2 0x0	/* PA27 periph B */
-							 0 28 0x2 0x0	/* PA28 periph B */
-							 0 29 0x2 0x0>;	/* PA29 periph B */
+							<AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
 					};
 				};
 
 				spi0 {
 					pinctrl_spi0: spi0-0 {
 						atmel,pins =
-							<0 11 0x1 0x0	/* PA11 periph A SPI0_MISO pin */
-							 0 12 0x1 0x0	/* PA12 periph A SPI0_MOSI pin */
-							 0 13 0x1 0x0>;	/* PA13 periph A SPI0_SPCK pin */
+							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A SPI0_MISO pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A SPI0_MOSI pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA13 periph A SPI0_SPCK pin */
 					};
 				};
 
 				spi1 {
 					pinctrl_spi1: spi1-0 {
 						atmel,pins =
-							<0 21 0x2 0x0	/* PA21 periph B SPI1_MISO pin */
-							 0 22 0x2 0x0	/* PA22 periph B SPI1_MOSI pin */
-							 0 23 0x2 0x0>;	/* PA23 periph B SPI1_SPCK pin */
+							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA21 periph B SPI1_MISO pin */
+							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B SPI1_MOSI pin */
+							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA23 periph B SPI1_SPCK pin */
 					};
 				};
 
 				i2c0 {
 					pinctrl_i2c0: i2c0-0 {
 						atmel,pins =
-							<0 30 0x1 0x0	/* PA30 periph A I2C0 data */
-							 0 31 0x1 0x0>;	/* PA31 periph A I2C0 clock */
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA30 periph A I2C0 data */
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA31 periph A I2C0 clock */
 					};
 				};
 
 				i2c1 {
 					pinctrl_i2c1: i2c1-0 {
 						atmel,pins =
-							<2 0 0x3 0x0	/* PC0 periph C I2C1 data */
-							 2 1 0x3 0x0>;	/* PC1 periph C I2C1 clock */
+							<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC0 periph C I2C1 data */
+							 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC1 periph C I2C1 clock */
 					};
 				};
 
 				i2c2 {
 					pinctrl_i2c2: i2c2-0 {
 						atmel,pins =
-							<1 4 0x2 0x0	/* PB4 periph B I2C2 data */
-							 1 5 0x2 0x0>;	/* PB5 periph B I2C2 clock */
+							<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB4 periph B I2C2 data */
+							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB5 periph B I2C2 clock */
 					};
 				};
 
 				i2c_gpio0 {
 					pinctrl_i2c_gpio0: i2c_gpio0-0 {
 						atmel,pins =
-							<0 30 0x0 0x2	/* PA30 gpio multidrive I2C0 data */
-							 0 31 0x0 0x2>;	/* PA31 gpio multidrive I2C0 clock */
+							<AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PA30 gpio multidrive I2C0 data */
+							 AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PA31 gpio multidrive I2C0 clock */
 					};
 				};
 
 				i2c_gpio1 {
 					pinctrl_i2c_gpio1: i2c_gpio1-0 {
 						atmel,pins =
-							<2 0 0x0 0x2	/* PC0 gpio multidrive I2C1 data */
-							 2 1 0x0 0x2>;	/* PC1 gpio multidrive I2C1 clock */
+							<AT91_PIOC 0 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PC0 gpio multidrive I2C1 data */
+							 AT91_PIOC 1 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PC1 gpio multidrive I2C1 clock */
 					};
 				};
 
 				i2c_gpio2 {
 					pinctrl_i2c_gpio2: i2c_gpio2-0 {
 						atmel,pins =
-							<1 4 0x0 0x2	/* PB4 gpio multidrive I2C2 data */
-							 1 5 0x0 0x2>;	/* PB5 gpio multidrive I2C2 clock */
+							<AT91_PIOB 4 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PB4 gpio multidrive I2C2 data */
+							 AT91_PIOB 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PB5 gpio multidrive I2C2 clock */
 					};
 				};
 
 				pioA: gpio@fffff400 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
-					interrupts = <2 4 1>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -424,7 +427,7 @@
 				pioB: gpio@fffff600 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff600 0x200>;
-					interrupts = <2 4 1>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					#gpio-lines = <19>;
@@ -435,7 +438,7 @@
 				pioC: gpio@fffff800 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff800 0x200>;
-					interrupts = <3 4 1>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					interrupt-controller;
@@ -445,7 +448,7 @@
 				pioD: gpio@fffffa00 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffffa00 0x200>;
-					interrupts = <3 4 1>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 					#gpio-cells = <2>;
 					gpio-controller;
 					#gpio-lines = <22>;
@@ -457,7 +460,7 @@
 			ssc0: ssc@f0010000 {
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xf0010000 0x4000>;
-				interrupts = <28 4 5>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disabled";
@@ -466,7 +469,7 @@
 			mmc0: mmc@f0008000 {
 				compatible = "atmel,hsmci";
 				reg = <0xf0008000 0x600>;
-				interrupts = <12 4 0>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma0 1 0>;
 				dma-names = "rxtx";
 				#address-cells = <1>;
@@ -477,7 +480,7 @@
 			mmc1: mmc@f000c000 {
 				compatible = "atmel,hsmci";
 				reg = <0xf000c000 0x600>;
-				interrupts = <26 4 0>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma1 1 0>;
 				dma-names = "rxtx";
 				#address-cells = <1>;
@@ -488,7 +491,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
-				interrupts = <1 4 7>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
 				status = "disabled";
@@ -497,7 +500,7 @@
 			usart0: serial@f801c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x200>;
-				interrupts = <5 4 5>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
 				status = "disabled";
@@ -506,7 +509,7 @@
 			usart1: serial@f8020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x200>;
-				interrupts = <6 4 5>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
 				status = "disabled";
@@ -515,7 +518,7 @@
 			usart2: serial@f8024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x200>;
-				interrupts = <7 4 5>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
 				status = "disabled";
@@ -524,7 +527,7 @@
 			macb0: ethernet@f802c000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xf802c000 0x100>;
-				interrupts = <24 4 3>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_rmii>;
 				status = "disabled";
@@ -533,14 +536,14 @@
 			macb1: ethernet@f8030000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xf8030000 0x100>;
-				interrupts = <27 4 3>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
 				status = "disabled";
 			};
 
 			i2c0: i2c@f8010000 {
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf8010000 0x100>;
-				interrupts = <9 4 6>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
 				dmas = <&dma0 1 7>,
 				       <&dma0 1 8>;
 				dma-names = "tx", "rx";
@@ -554,7 +557,7 @@
 			i2c1: i2c@f8014000 {
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf8014000 0x100>;
-				interrupts = <10 4 6>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
 				dmas = <&dma1 1 5>,
 				       <&dma1 1 6>;
 				dma-names = "tx", "rx";
@@ -568,7 +571,7 @@
 			i2c2: i2c@f8018000 {
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf8018000 0x100>;
-				interrupts = <11 4 6>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
 				dmas = <&dma0 1 9>,
 				       <&dma0 1 10>;
 				dma-names = "tx", "rx";
@@ -582,7 +585,7 @@
 			adc0: adc@f804c000 {
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xf804c000 0x100>;
-				interrupts = <19 4 0>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
 				atmel,adc-use-external;
 				atmel,adc-channels-used = <0xffff>;
 				atmel,adc-vref = <3300>;
@@ -625,7 +628,7 @@
 				#size-cells = <0>;
 				compatible = "atmel,at91rm9200-spi";
 				reg = <0xf0000000 0x100>;
-				interrupts = <13 4 3>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
 				status = "disabled";
@@ -636,7 +639,7 @@
 				#size-cells = <0>;
 				compatible = "atmel,at91rm9200-spi";
 				reg = <0xf0004000 0x100>;
-				interrupts = <14 4 3>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
 				status = "disabled";
@@ -645,7 +648,7 @@
 			rtc@fffffeb0 {
 				compatible = "atmel,at91rm9200-rtc";
 				reg = <0xfffffeb0 0x40>;
-				interrupts = <1 4 7>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				status = "disabled";
 			};
 		};
@@ -664,8 +667,8 @@
 			atmel,nand-cmd-offset = <22>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
-			gpios = <&pioD 5 0
-				 &pioD 4 0
+			gpios = <&pioD 5 GPIO_ACTIVE_HIGH
+				 &pioD 4 GPIO_ACTIVE_HIGH
 				 0
 				>;
 			status = "disabled";
@@ -674,22 +677,22 @@
 		usb0: ohci@00600000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00600000 0x100000>;
-			interrupts = <22 4 2>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
 			status = "disabled";
 		};
 
 		usb1: ehci@00700000 {
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
-			interrupts = <22 4 2>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
 			status = "disabled";
 		};
 	};
 
 	i2c@0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 30 0 /* sda */
-			 &pioA 31 0 /* scl */
+		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
 			>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
@@ -703,8 +706,8 @@
 
 	i2c@1 {
 		compatible = "i2c-gpio";
-		gpios = <&pioC 0 0 /* sda */
-			 &pioC 1 0 /* scl */
+		gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */
+			 &pioC 1 GPIO_ACTIVE_HIGH /* scl */
 			>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
@@ -718,8 +721,8 @@
 
 	i2c@2 {
 		compatible = "i2c-gpio";
-		gpios = <&pioB 4 0 /* sda */
-			 &pioB 5 0 /* scl */
+		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
+			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
 			>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;