Merge tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Arnd Bergmann:
 "This is the set of device tree changes, mostly covering new hardware
  support, with 577 patches touching a little over 500 files.

  There are five new Arm SoCs supported in this release, all of them for
  existing SoC families:

   - Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in both NAS
     devices and Android Set-top-box designs, along with the
     "Horseradish", "Lion Skin" and "Mjolnir" reference platforms; the
     Mele X1000 and Xnano X5 set-top-boxes and the Banana Pi BPi-M4
     single-board computer.

   - Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC and
     the iW-RainboW-G21D-Qseven-RZG1H board/SoM

   - Rockchips RK3326 -- low-end 64-bit SoC along with the Odroid-GO
     Advance game console

  Newly added machines on already supported SoCs are:

   - AMLogic S905D based Smartlabs SML-5442TW TV box

   - AMLogic S905X3 based ODROID-C4 SBC

   - AMLogic S922XH based Beelink GT-King Pro TV box

   - Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC

   - Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2" and YADRO
     OpenPower P9 "Nicole"

   - Marvell Kirkwood based Check Point L-50 router

   - Mediatek MT8173 based Elm/Hana Chromebook laptops

   - Microchip SAMA5D2 "Industrial Connectivity Platform" reference
     board

   - NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit

   - Octavo OSDMP15x based Linux Automation MC-1 development board

   - Qualcomm SDM630 based Xiaomi Redmi Note 7 phone

   - Realtek RTD1295 based Xnano X5 TV Box

   - STMicroelectronics STM32MP1 based Stinger96 single-board computer
     and IoT Box

   - Samsung Exynos4210 based based Samsung Galaxy S2 phone

   - Socionext Uniphier based Akebi96 SBC

   - TI Keystone based K2G Evaluation board

   - TI am5729 based Beaglebone-AI development board

  Include device descriptions for additional hardware support in
  existing SoCs and machines based on all major SoC platforms:

   - AMlogic Meson

   - Allwinner sunxi

   - Arm Juno/VFP/Vexpress/Integrator

   - Broadcom bcm283x/bcm2711

   - Hisilicon hi6220

   - Marvell EBU

   - Mediatek MT27xx, MT76xx, MT81xx and MT67xx

   - Microchip SAMA5D2

   - NXP i.MX6/i.MX7/i.MX8 and Layerscape

   - Nvidia Tegra

   - Qualcomm Snapdragon

   - Renesas r8a77961, r8a7791

   - Rockchips RK32xx/RK33xx

   - ST-Ericsson ux500

   - STMicroelectronics SMT32

   - Samsung Exynos and S5PV210

   - Socionext Uniphier

   - TI OMAP5/DRA7 and Keystone"

* tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (564 commits)
  ARM: dts: keystone: Rename "msmram" node to "sram"
  arm: dts: mt2712: add uart APDMA to device tree
  arm64: dts: mt8183: add mmc node
  arm64: dts: mt2712: add ethernet device node
  arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1
  ARM: dts: mmp3: Add the fifth SD HCI
  ARM: dts: berlin*: Fix up the SDHCI node names
  ARM: dts: mmp3: Fix USB & USB PHY node names
  ARM: dts: mmp3: Fix L2 cache controller node name
  ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property
  ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property
  ARM: dts: pxa910: Fix the gpio interrupt cell number
  ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property
  ARM: dts: pxa168: Fix the gpio interrupt cell number
  ARM: dts: pxa168: Add missing address/size cells to i2c nodes
  ARM: dts: dove: Fix interrupt controller node name
  ARM: dts: kirkwood: Fix interrupt controller node name
  arm64: dts: Add SC9863A emmc and sd card nodes
  arm64: dts: Add SC9863A clock nodes
  arm64: dts: mt6358: add PMIC MT6358 related nodes
  ...

1 files changed, 8 insertions, 17 deletions

diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index 1c24ac8019ba..c894c7c788a9 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -18,9 +18,9 @@
 	compatible = "atmel,sama5d2-ptc_ek", "atmel,sama5d2", "atmel,sama5";
 
 	aliases {
-		serial0 = &uart0;
-		i2c0	= &i2c0;
-		i2c1	= &i2c1;
+		serial0 = &uart0;	/* DBGU */
+		i2c0	= &i2c0;	/* mikroBUS 1 */
+		i2c1	= &i2c1;	/* XPRO EXT1 */
 		i2c2	= &i2c2;
 	};
 
@@ -40,7 +40,7 @@
 
 	ahb {
 		usb0: gadget@300000 {
-			atmel,vbus-gpio = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
+			atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usba_vbus>;
 			status = "okay";
@@ -125,8 +125,6 @@
 			bus-width = <8>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sdmmc0_default>;
-			non-removable;
-			mmc-ddr-1_8v;
 			status = "okay";
 		};
 
@@ -184,7 +182,7 @@
 				pinctrl-0 = <&pinctrl_i2c0_default>;
 				pinctrl-1 = <&pinctrl_i2c0_gpio>;
 				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
-				scl-gpios = <&pioA PIN_PD22 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				status = "okay";
 			};
 
@@ -193,20 +191,12 @@
 				status = "okay";
 
 				i2c2: i2c@600 {
-					compatible = "atmel,sama5d2-i2c";
-					reg = <0x600 0x200>;
-					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
 					dmas = <0>, <0>;
-					dma-names = "tx", "rx";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
 					pinctrl-names = "default", "gpio";
 					pinctrl-0 = <&pinctrl_flx0_default>;
 					pinctrl-1 = <&pinctrl_flx0_gpio>;
 					sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>;
-					scl-gpios = <&pioA PIN_PB29 GPIO_ACTIVE_HIGH>;
-					atmel,fifo-size = <16>;
+					scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 					status = "okay";
 				};
 			};
@@ -236,7 +226,7 @@
 				pinctrl-0 = <&pinctrl_i2c1_default>;
 				pinctrl-1 = <&pinctrl_i2c1_gpio>;
 				sda-gpios = <&pioA PIN_PC6 GPIO_ACTIVE_HIGH>;
-				scl-gpios = <&pioA PIN_PC7 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PC7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				status = "okay";
 
 				at24@50 {
@@ -414,6 +404,7 @@
 			label = "PB_USER";
 			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
 			linux,code = <0x104>;
+			wakeup-source;
 		};
 	};