Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly updates of the usual drivers: arcmsr, qla2xx, lpfc,
  ufs, mpt3sas, hisi_sas.

  In addition we have removed several really old drivers: sym53c416,
  NCR53c406a, fdomain, fdomain_cs and removed the old scsi_module.c
  initialization from all remaining drivers.

  Plus an assortment of bug fixes, initialization errors and other minor
  fixes"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (168 commits)
  scsi: ufs: Add support for Auto-Hibernate Idle Timer
  scsi: ufs: sysfs: reworking of the rpm_lvl and spm_lvl entries
  scsi: qla2xxx: fx00 copypaste typo
  scsi: qla2xxx: fix error message on <qla2400
  scsi: smartpqi: update driver version
  scsi: smartpqi: workaround fw bug for oq deletion
  scsi: arcmsr: Change driver version to v1.40.00.05-20180309
  scsi: arcmsr: Sleep to avoid CPU stuck too long for waiting adapter ready
  scsi: arcmsr: Handle adapter removed due to thunderbolt cable disconnection.
  scsi: arcmsr: Rename ACB_F_BUS_HANG_ON to ACB_F_ADAPTER_REMOVED for adapter hot-plug
  scsi: qla2xxx: Update driver version to 10.00.00.06-k
  scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan
  scsi: qla2xxx: Cleanup code to improve FC-NVMe error handling
  scsi: qla2xxx: Fix FC-NVMe IO abort during driver reset
  scsi: qla2xxx: Fix retry for PRLI RJT with reason of BUSY
  scsi: qla2xxx: Remove nvme_done_list
  scsi: qla2xxx: Return busy if rport going away
  scsi: qla2xxx: Fix n2n_ae flag to prevent dev_loss on PDB change
  scsi: qla2xxx: Add FC-NVMe abort processing
  scsi: qla2xxx: Add changes for devloss timeout in driver
  ...

9 files changed, 915 insertions, 2612 deletions

diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs
new file mode 100644
index 000000000000..016724ec26d5
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-ufs
@@ -0,0 +1,885 @@
+What:		/sys/bus/*/drivers/ufshcd/*/auto_hibern8
+Date:		March 2018
+Contact:	linux-scsi@vger.kernel.org
+Description:
+		This file contains the auto-hibernate idle timer setting of a
+		UFS host controller. A value of '0' means auto-hibernate is not
+		enabled. Otherwise the value is the number of microseconds of
+		idle time before the UFS host controller will autonomously put
+		the link into hibernate state. That will save power at the
+		expense of increased latency. Note that the hardware supports
+		10-bit values with a power-of-ten multiplier which allows a
+		maximum value of 102300000. Refer to the UFS Host Controller
+		Interface specification for more details.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_type
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the device type. This is one of the UFS
+		device descriptor parameters. The full information about
+		the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_class
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the device class. This is one of the UFS
+		device descriptor parameters. The full information about
+		the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_sub_class
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the UFS storage subclass. This is one of
+		the UFS device descriptor parameters. The full information
+		about the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/protocol
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the protocol supported by an UFS device.
+		This is one of the UFS device descriptor parameters.
+		The full information about the descriptor could be found
+		at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_luns
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows number of logical units. This is one of
+		the UFS device descriptor parameters. The full information
+		about the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_wluns
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows number of well known logical units.
+		This is one of the UFS device descriptor parameters.
+		The full information about the descriptor could be found
+		at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/boot_enable
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows value that indicates whether the device is
+		enabled for boot. This is one of the UFS device descriptor
+		parameters. The full information about the descriptor could
+		be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/descriptor_access_enable
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows value that indicates whether the device
+		descriptor could be read after partial initialization phase
+		of the boot sequence. This is one of the UFS device descriptor
+		parameters. The full information about the descriptor could
+		be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_power_mode
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows value that defines the power mode after
+		device initialization or hardware reset. This is one of
+		the UFS device descriptor parameters. The full information
+		about the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/high_priority_lun
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the high priority lun. This is one of
+		the UFS device descriptor parameters. The full information
+		about the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/secure_removal_type
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the secure removal type. This is one of
+		the UFS device descriptor parameters. The full information
+		about the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/support_security_lun
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows whether the security lun is supported.
+		This is one of the UFS device descriptor parameters.
+		The full information about the descriptor could be found
+		at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/bkops_termination_latency
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the background operations termination
+		latency. This is one of the UFS device descriptor parameters.
+		The full information about the descriptor could be found
+		at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_active_icc_level
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the initial active ICC level. This is one
+		of the UFS device descriptor parameters. The full information
+		about the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/specification_version
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the specification version. This is one
+		of the UFS device descriptor parameters. The full information
+		about the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturing_date
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the manufacturing date in BCD format.
+		This is one of the UFS device descriptor parameters.
+		The full information about the descriptor could be found
+		at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturer_id
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the manufacturee ID. This is one of the
+		UFS device descriptor parameters. The full information about
+		the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtt_capability
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the maximum number of outstanding RTTs
+		supported by the device. This is one of the UFS device
+		descriptor parameters. The full information about
+		the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtc_update
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the frequency and method of the realtime
+		clock update. This is one of the UFS device descriptor
+		parameters. The full information about the descriptor
+		could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/ufs_features
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows which features are supported by the device.
+		This is one of the UFS device descriptor parameters.
+		The full information about the descriptor could be
+		found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/ffu_timeout
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the FFU timeout. This is one of the
+		UFS device descriptor parameters. The full information
+		about the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/queue_depth
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the device queue depth. This is one of the
+		UFS device descriptor parameters. The full information
+		about the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_version
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the device version. This is one of the
+		UFS device descriptor parameters. The full information
+		about the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_secure_wpa
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows number of secure write protect areas
+		supported by the device. This is one of the UFS device
+		descriptor parameters. The full information about
+		the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_max_data_size
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the maximum amount of data that may be
+		written during the pre-soldering phase of the PSA flow.
+		This is one of the UFS device descriptor parameters.
+		The full information about the descriptor could be found
+		at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_state_timeout
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the command maximum timeout for a change
+		in PSA state. This is one of the UFS device descriptor
+		parameters. The full information about the descriptor could
+		be found at UFS specifications 2.1.
+		The file is read only.
+
+
+What:		/sys/bus/platform/drivers/ufshcd/*/interconnect_descriptor/unipro_version
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the MIPI UniPro version number in BCD format.
+		This is one of the UFS interconnect descriptor parameters.
+		The full information about the descriptor could be found at
+		UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/interconnect_descriptor/mphy_version
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the MIPI M-PHY version number in BCD format.
+		This is one of the UFS interconnect descriptor parameters.
+		The full information about the descriptor could be found at
+		UFS specifications 2.1.
+		The file is read only.
+
+
+What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/raw_device_capacity
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the total memory quantity available to
+		the user to configure the device logical units. This is one
+		of the UFS geometry descriptor parameters. The full
+		information about the descriptor could be found at
+		UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_luns
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the maximum number of logical units
+		supported by the UFS device. This is one of the UFS
+		geometry descriptor parameters. The full information about
+		the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/segment_size
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the segment size. This is one of the UFS
+		geometry descriptor parameters. The full information about
+		the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/allocation_unit_size
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the allocation unit size. This is one of
+		the UFS geometry descriptor parameters. The full information
+		about the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/min_addressable_block_size
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the minimum addressable block size. This
+		is one of the UFS geometry descriptor parameters. The full
+		information about the descriptor could be found at UFS
+		specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_read_block_size
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the optimal read block size. This is one
+		of the UFS geometry descriptor parameters. The full
+		information about the descriptor could be found at UFS
+		specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_write_block_size
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the optimal write block size. This is one
+		of the UFS geometry descriptor parameters. The full
+		information about the descriptor could be found at UFS
+		specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_in_buffer_size
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the maximum data-in buffer size. This
+		is one of the UFS geometry descriptor parameters. The full
+		information about the descriptor could be found at UFS
+		specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_out_buffer_size
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the maximum data-out buffer size. This
+		is one of the UFS geometry descriptor parameters. The full
+		information about the descriptor could be found at UFS
+		specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/rpmb_rw_size
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the maximum number of RPMB frames allowed
+		in Security Protocol In/Out. This is one of the UFS geometry
+		descriptor parameters. The full information about the
+		descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/dyn_capacity_resource_policy
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the dynamic capacity resource policy. This
+		is one of the UFS geometry descriptor parameters. The full
+		information about the descriptor could be found at
+		UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/data_ordering
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows support for out-of-order data transfer.
+		This is one of the UFS geometry descriptor parameters.
+		The full information about the descriptor could be found at
+		UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_contexts
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows maximum available number of contexts which
+		are supported by the device. This is one of the UFS geometry
+		descriptor parameters. The full information about the
+		descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_unit_size
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows system data tag unit size. This is one of
+		the UFS geometry descriptor parameters. The full information
+		about the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_resource_size
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows maximum storage area size allocated by
+		the device to handle system data by the tagging mechanism.
+		This is one of the UFS geometry descriptor parameters.
+		The full information about the descriptor could be found at
+		UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/secure_removal_types
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows supported secure removal types. This is
+		one of the UFS geometry descriptor parameters. The full
+		information about the descriptor could be found at
+		UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/memory_types
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows supported memory types. This is one of
+		the UFS geometry descriptor parameters. The full
+		information about the descriptor could be found at
+		UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_max_alloc_units
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the maximum number of allocation units for
+		different memory types (system code, non persistent,
+		enhanced type 1-4). This is one of the UFS geometry
+		descriptor parameters. The full information about the
+		descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_capacity_adjustment_factor
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the memory capacity adjustment factor for
+		different memory types (system code, non persistent,
+		enhanced type 1-4). This is one of the UFS geometry
+		descriptor parameters. The full information about the
+		descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+
+What:		/sys/bus/platform/drivers/ufshcd/*/health_descriptor/eol_info
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows preend of life information. This is one
+		of the UFS health descriptor parameters. The full
+		information about the descriptor could be found at
+		UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_a
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows indication of the device life time
+		(method a). This is one of the UFS health descriptor
+		parameters. The full information about the descriptor
+		could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_b
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows indication of the device life time
+		(method b). This is one of the UFS health descriptor
+		parameters. The full information about the descriptor
+		could be found at UFS specifications 2.1.
+		The file is read only.
+
+
+What:		/sys/bus/platform/drivers/ufshcd/*/power_descriptor/active_icc_levels_vcc*
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows maximum VCC, VCCQ and VCCQ2 value for
+		active ICC levels from 0 to 15. This is one of the UFS
+		power descriptor parameters. The full information about
+		the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+
+What:		/sys/bus/platform/drivers/ufshcd/*/string_descriptors/manufacturer_name
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file contains a device manufactureer name string.
+		The full information about the descriptor could be found at
+		UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_name
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file contains a product name string. The full information
+		about the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/string_descriptors/oem_id
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file contains a OEM ID string. The full information
+		about the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/string_descriptors/serial_number
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file contains a device serial number string. The full
+		information about the descriptor could be found at
+		UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_revision
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file contains a product revision string. The full
+		information about the descriptor could be found at
+		UFS specifications 2.1.
+		The file is read only.
+
+
+What:		/sys/class/scsi_device/*/device/unit_descriptor/boot_lun_id
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows boot LUN information. This is one of
+		the UFS unit descriptor parameters. The full information
+		about the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/class/scsi_device/*/device/unit_descriptor/lun_write_protect
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows LUN write protection status. This is one of
+		the UFS unit descriptor parameters. The full information
+		about the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/class/scsi_device/*/device/unit_descriptor/lun_queue_depth
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows LUN queue depth. This is one of the UFS
+		unit descriptor parameters. The full information about
+		the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/class/scsi_device/*/device/unit_descriptor/psa_sensitive
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows PSA sensitivity. This is one of the UFS
+		unit descriptor parameters. The full information about
+		the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/class/scsi_device/*/device/unit_descriptor/lun_memory_type
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows LUN memory type. This is one of the UFS
+		unit descriptor parameters. The full information about
+		the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/class/scsi_device/*/device/unit_descriptor/data_reliability
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file defines the device behavior when a power failure
+		occurs during a write operation. This is one of the UFS
+		unit descriptor parameters. The full information about
+		the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/class/scsi_device/*/device/unit_descriptor/logical_block_size
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the size of addressable logical blocks
+		(calculated as an exponent with base 2). This is one of
+		the UFS unit descriptor parameters. The full information about
+		the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/class/scsi_device/*/device/unit_descriptor/logical_block_count
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows total number of addressable logical blocks.
+		This is one of the UFS unit descriptor parameters. The full
+		information about the descriptor could be found at
+		UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/class/scsi_device/*/device/unit_descriptor/erase_block_size
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the erase block size. This is one of
+		the UFS unit descriptor parameters. The full information
+		about the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/class/scsi_device/*/device/unit_descriptor/provisioning_type
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the thin provisioning type. This is one of
+		the UFS unit descriptor parameters. The full information
+		about the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resourse_count
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the total physical memory resources. This is
+		one of the UFS unit descriptor parameters. The full information
+		about the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/class/scsi_device/*/device/unit_descriptor/context_capabilities
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the context capabilities. This is one of
+		the UFS unit descriptor parameters. The full information
+		about the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/class/scsi_device/*/device/unit_descriptor/large_unit_granularity
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the granularity of the LUN. This is one of
+		the UFS unit descriptor parameters. The full information
+		about the descriptor could be found at UFS specifications 2.1.
+		The file is read only.
+
+
+What:		/sys/bus/platform/drivers/ufshcd/*/flags/device_init
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the device init status. The full information
+		about the flag could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/flags/permanent_wpe
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows whether permanent write protection is enabled.
+		The full information about the flag could be found at
+		UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/flags/power_on_wpe
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows whether write protection is enabled on all
+		logical units configured as power on write protected. The
+		full information about the flag could be found at
+		UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/flags/bkops_enable
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows whether the device background operations are
+		enabled. The full information about the flag could be
+		found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/flags/life_span_mode_enable
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows whether the device life span mode is enabled.
+		The full information about the flag could be found at
+		UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/flags/phy_resource_removal
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows whether physical resource removal is enable.
+		The full information about the flag could be found at
+		UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/flags/busy_rtc
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows whether the device is executing internal
+		operation related to real time clock. The full information
+		about the flag could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/flags/disable_fw_update
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows whether the device FW update is permanently
+		disabled. The full information about the flag could be found
+		at UFS specifications 2.1.
+		The file is read only.
+
+
+What:		/sys/bus/platform/drivers/ufshcd/*/attributes/boot_lun_enabled
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file provides the boot lun enabled UFS device attribute.
+		The full information about the attribute could be found at
+		UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/attributes/current_power_mode
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file provides the current power mode UFS device attribute.
+		The full information about the attribute could be found at
+		UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/attributes/active_icc_level
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file provides the active icc level UFS device attribute.
+		The full information about the attribute could be found at
+		UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/attributes/ooo_data_enabled
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file provides the out of order data transfer enabled UFS
+		device attribute. The full information about the attribute
+		could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/attributes/bkops_status
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file provides the background operations status UFS device
+		attribute. The full information about the attribute could
+		be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/attributes/purge_status
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file provides the purge operation status UFS device
+		attribute. The full information about the attribute could
+		be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/attributes/max_data_in_size
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the maximum data size in a DATA IN
+		UPIU. The full information about the attribute could
+		be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/attributes/max_data_out_size
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the maximum number of bytes that can be
+		requested with a READY TO TRANSFER UPIU. The full information
+		about the attribute could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/attributes/reference_clock_frequency
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file provides the reference clock frequency UFS device
+		attribute. The full information about the attribute could
+		be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/attributes/configuration_descriptor_lock
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows whether the configuration descriptor is locked.
+		The full information about the attribute could be found at
+		UFS specifications 2.1. The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/attributes/max_number_of_rtt
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file provides the maximum current number of
+		outstanding RTTs in device that is allowed. The full
+		information about the attribute could be found at
+		UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_control
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file provides the exception event control UFS device
+		attribute. The full information about the attribute could
+		be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_status
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file provides the exception event status UFS device
+		attribute. The full information about the attribute could
+		be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/attributes/ffu_status
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file provides the ffu status UFS device attribute.
+		The full information about the attribute could be found at
+		UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/attributes/psa_state
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file show the PSA feature status. The full information
+		about the attribute could be found at UFS specifications 2.1.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/attributes/psa_data_size
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the amount of data that the host plans to
+		load to all logical units in pre-soldering state.
+		The full information about the attribute could be found at
+		UFS specifications 2.1.
+		The file is read only.
+
+
+What:		/sys/class/scsi_device/*/device/dyn_cap_needed
+Date:		February 2018
+Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description:	This file shows the The amount of physical memory needed
+		to be removed from the physical memory resources pool of
+		the particular logical unit. The full information about
+		the attribute could be found at UFS specifications 2.1.
+		The file is read only.
+
+
+What:		/sys/bus/platform/drivers/ufshcd/*/rpm_lvl
+Date:		September 2014
+Contact:	Subhash Jadavani <subhashj@codeaurora.org>
+Description:	This entry could be used to set or show the UFS device
+		runtime power management level. The current driver
+		implementation supports 6 levels with next target states:
+		0 - an UFS device will stay active, an UIC link will
+		stay active
+		1 - an UFS device will stay active, an UIC link will
+		hibernate
+		2 - an UFS device will moved to sleep, an UIC link will
+		stay active
+		3 - an UFS device will moved to sleep, an UIC link will
+		hibernate
+		4 - an UFS device will be powered off, an UIC link will
+		hibernate
+		5 - an UFS device will be powered off, an UIC link will
+		be powered off
+
+What:		/sys/bus/platform/drivers/ufshcd/*/rpm_target_dev_state
+Date:		February 2018
+Contact:	Subhash Jadavani <subhashj@codeaurora.org>
+Description:	This entry shows the target power mode of an UFS device
+		for the chosen runtime power management level.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/rpm_target_link_state
+Date:		February 2018
+Contact:	Subhash Jadavani <subhashj@codeaurora.org>
+Description:	This entry shows the target state of an UFS UIC link
+		for the chosen runtime power management level.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/spm_lvl
+Date:		September 2014
+Contact:	Subhash Jadavani <subhashj@codeaurora.org>
+Description:	This entry could be used to set or show the UFS device
+		system power management level. The current driver
+		implementation supports 6 levels with next target states:
+		0 - an UFS device will stay active, an UIC link will
+		stay active
+		1 - an UFS device will stay active, an UIC link will
+		hibernate
+		2 - an UFS device will moved to sleep, an UIC link will
+		stay active
+		3 - an UFS device will moved to sleep, an UIC link will
+		hibernate
+		4 - an UFS device will be powered off, an UIC link will
+		hibernate
+		5 - an UFS device will be powered off, an UIC link will
+		be powered off
+
+What:		/sys/bus/platform/drivers/ufshcd/*/spm_target_dev_state
+Date:		February 2018
+Contact:	Subhash Jadavani <subhashj@codeaurora.org>
+Description:	This entry shows the target power mode of an UFS device
+		for the chosen system power management level.
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/spm_target_link_state
+Date:		February 2018
+Contact:	Subhash Jadavani <subhashj@codeaurora.org>
+Description:	This entry shows the target state of an UFS UIC link
+		for the chosen system power management level.
+		The file is read only.
diff --git a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
index df3bef7998fa..8c6659ed2cfc 100644
--- a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
+++ b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
@@ -53,6 +53,13 @@ Main node required properties:
 Optional main node properties:
  - hip06-sas-v2-quirk-amt : when set, indicates that the v2 controller has the
 			    "am-max-transmissions" limitation.
+ - hisilicon,signal-attenuation : array of 3 32-bit values, containing de-emphasis,
+		preshoot, and boost attenuation readings for the board. They
+		are used to describe the signal attenuation of the board. These
+		values' range is 7600 to 12400, and used to represent -24dB to
+		24dB.
+		The formula is "y = (x-10000)/10000". For example, 10478
+		means 4.78dB.
 
 Example:
 	sas0: sas@c1000000 {
diff --git a/Documentation/driver-api/scsi.rst b/Documentation/driver-api/scsi.rst
index 3ae337929721..31ad0fed6763 100644
--- a/Documentation/driver-api/scsi.rst
+++ b/Documentation/driver-api/scsi.rst
@@ -154,12 +154,6 @@ lists).
 .. kernel-doc:: drivers/scsi/scsi_lib_dma.c
    :export:
 
-drivers/scsi/scsi_module.c
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The file drivers/scsi/scsi_module.c contains legacy support for
-old-style host templates. It should never be used by any new driver.
-
 drivers/scsi/scsi_proc.c
 ~~~~~~~~~~~~~~~~~~~~~~~~~
 
diff --git a/Documentation/scsi/ChangeLog.1992-1997 b/Documentation/scsi/ChangeLog.1992-1997
deleted file mode 100644
index 6faad7e6417c..000000000000
--- a/Documentation/scsi/ChangeLog.1992-1997
+++ /dev/null
@@ -1,2023 +0,0 @@
-Sat Jan 18 15:51:45 1997  Richard Henderson  <rth@tamu.edu>
-
-	* Don't play with usage_count directly, instead hand around
-	the module header and use the module macros.
-
-Fri May 17 00:00:00 1996  Leonard N. Zubkoff <lnz@dandelion.com>
-
-	* BusLogic Driver Version 2.0.3 Released.
-
-Tue Apr 16 21:00:00 1996  Leonard N. Zubkoff <lnz@dandelion.com>
-
-	* BusLogic Driver Version 1.3.2 Released.
-
-Sun Dec 31 23:26:00 1995  Leonard N. Zubkoff <lnz@dandelion.com>
-
-	* BusLogic Driver Version 1.3.1 Released.
-
-Fri Nov 10 15:29:49 1995  Leonard N. Zubkoff <lnz@dandelion.com>
-
-	* Released new BusLogic driver.
-
-Wed Aug  9 22:37:04 1995  Andries Brouwer  <aeb@cwi.nl>
-
-	As a preparation for new device code, separated the various
-	functions the request->dev field had into the device proper,
-	request->rq_dev and a status field request->rq_status.
-
-	The 2nd argument of bios_param is now a kdev_t.
-
-Wed Jul 19 10:43:15 1995  Michael Neuffer  <neuffer@goofy.zdv.uni-mainz.de>
-
-        * scsi.c (scsi_proc_info): /proc/scsi/scsi now also lists all
-	attached devices.
-
-	* scsi_proc.c (proc_print_scsidevice): Added. Used by scsi.c and
-	eata_dma_proc.c to produce some device info for /proc/scsi.
-
-	* eata_dma.c (eata_queue)(eata_int_handler)(eata_scsi_done):
-	Changed handling of internal SCSI commands send to the HBA.
-
-
-Wed Jul 19 10:09:17 1995  Michael Neuffer  <neuffer@goofy.zdv.uni-mainz.de>
-
-	* Linux 1.3.11 released.
-
-	* eata_dma.c (eata_queue)(eata_int_handler): Added code to do
-	command latency measurements if requested by root through
-	/proc/scsi interface.
-	Throughout Use HZ constant for time references.
-
-	* eata_pio.c: Use HZ constant for time references.
-
-	* aic7xxx.c, aic7xxx.h, aic7xxx_asm.c: Changed copyright from BSD
-	to GNU style.
-
-	* scsi.h: Added READ_12 command opcode constant
-
-Wed Jul 19 09:25:30 1995  Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de>
-
-	* Linux 1.3.10 released.
-
-	* scsi_proc.c (dispatch_scsi_info): Removed unused variable.
-
-Wed Jul 19 09:25:30 1995  Michael Neuffer  <neuffer@goofy.zdv.uni-mainz.de>
-
-	* Linux 1.3.9 released.
-
-	* scsi.c Blacklist concept expanded to 'support' more device
-	deficiencies. blacklist[] renamed to device_list[]
-	(scan_scsis): Code cleanup.
-
-	* scsi_debug.c (scsi_debug_proc_info): Added support to control
-	device lockup simulation via /proc/scsi interface.
-
-
-Wed Jul 19 09:22:34 1995  Michael Neuffer  <neuffer@goofy.zdv.uni-mainz.de>
-
-	* Linux 1.3.7 released.
-
-	* scsi_proc.c: Fixed a number of bugs in directory handling
-
-Wed Jul 19 09:18:28 1995  Michael Neuffer  <neuffer@goofy.zdv.uni-mainz.de>
-
-	* Linux 1.3.5 released.
-
-	* Native wide, multichannel and /proc/scsi support now in official
-	kernel distribution.
-
-        * scsi.c/h, hosts.c/h et al reindented to increase readability
-	(especially on 80 column wide terminals).
-
-	* scsi.c, scsi_proc.c, ../../fs/proc/inode.c: Added
-	/proc/scsi/scsi which allows root to scan for hotplugged devices.
-
-	* scsi.c (scsi_proc_info): Added, to support /proc/scsi/scsi.
-	(scan_scsis): Added some 'spaghetti' code to allow scanning for
-	single devices.
-	
-
-Thu Jun 20 15:20:27 1995  Michael Neuffer  <neuffer@goofy.zdv.uni-mainz.de>
-
-        * proc.c: Renamed to scsi_proc.c
-
-Mon Jun 12 20:32:45 1995  Michael Neuffer  <neuffer@goofy.zdv.uni-mainz.de>
-
-	* Linux 1.3.0 released.
-
-Mon May 15 19:33:14 1995  Michael Neuffer  <neuffer@goofy.zdv.uni-mainz.de>
-
-	* scsi.c: Added native multichannel and wide scsi support.
-
-	* proc.c (dispatch_scsi_info) (build_proc_dir_hba_entries):
-	Updated /proc/scsi interface.
-
-Thu May  4 17:58:48 1995  Michael Neuffer  <neuffer@goofy.zdv.uni-mainz.de>
-
-	* sd.c (requeue_sd_request): Zero out the scatterlist only if
-	scsi_malloc returned memory for it.
-
-	* eata_dma.c (register_HBA) (eata_queue): Add support for
-	large scatter/gather tables and set use_clustering accordingly
-
-	* hosts.c: Make use_clustering changeable in the Scsi_Host structure.
-
-Wed Apr 12 15:25:52 1995  Eric Youngdale  (eric@andante)
-
-	* Linux 1.2.5 released.
-
-	* buslogic.c: Update to version 1.15 (From Leonard N. Zubkoff).
-	Fixed interrupt routine to avoid races when handling multiple
-	complete commands per interrupt.  Seems to come up with faster
-	cards.
-
-	* eata_dma.c: Update to 2.3.5r. Modularize. Improved error handling
-        throughout and fixed bug interrupt routine which resulted in shifted
-        status bytes. Added blink LED state checks for ISA and EISA HBAs.
-        Memory management bug seems to have disappeared ==> increasing
-        C_P_L_CURRENT_MAX to 16 for now. Decreasing C_P_L_DIV to 3 for
-        performance reasons.
-
-	* scsi.c: If we get a FMK, EOM, or ILI when attempting to scan
-	the bus, assume that it was just noise on the bus, and ignore
-	the device.
-
-	* scsi.h: Update and add a bunch of missing commands which we
-	were never using.
-
-	* sd.c: Use restore_flags in do_sd_request - this may result in
-	latency conditions, but it gets rid of races and crashes.
-	Do not save flags again when searching for a second command to
-	queue.
-
-	* st.c: Use bytes, not STP->buffer->buffer_size when reading
-	from tape.
-
-
-Tue Apr  4 09:42:08 1995  Eric Youngdale  (eric@andante)
-
-	* Linux 1.2.4 released.
-
-	* st.c: Fix typo - restoring wrong flags.
-
-Wed Mar 29 06:55:12 1995  Eric Youngdale  (eric@andante)
-
-	* Linux 1.2.3 released.
-
-	* st.c: Perform some waiting operations with interrupts off.
-	Is this correct???
-
-Wed Mar 22 10:34:26 1995  Eric Youngdale  (eric@andante)
-
-	* Linux 1.2.2 released.
-
-	* aha152x.c: Modularize.  Add support for PCMCIA.
-
-	* eata.c: Update to version 2.0.  Fixed bug preventing media
-	detection.  If scsi_register_host returns NULL, fail gracefully.
-
-	* scsi.c: Detect as NEC (for photo-cd purposes) for the 84
-	and 25 models as "NEC_OLDCDR".
-
-	* scsi.h: Add define for NEC_OLDCDR
-
-	* sr.c: Add handling for NEC_OLDCDR.  Treat as unknown.
-
-	* u14-34f.c: Update to version 2.0.  Fixed same bug as in
-	eata.c.
-
-
-Mon Mar  6 11:11:20 1995  Eric Youngdale  (eric@andante)
-
-	* Linux 1.2.0 released.  Yeah!!!
-
-	* Minor spelling/punctuation changes throughout.  Nothing
-	substantive.
-
-Mon Feb 20 21:33:03 1995  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.95 released.
-
-	* qlogic.c: Update to version 0.41.
-
-	* seagate.c: Change some message to be more descriptive about what
-	we detected.
-
-	* sr.c: spelling/whitespace changes.
-
-Mon Feb 20 21:33:03 1995  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.94 released.
-
-Mon Feb 20 08:57:17 1995  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.93 released.
-
-	* hosts.h: Change io_port to long int from short.
-
- 	* 53c7,8xx.c: crash on AEN fixed, SCSI reset is no longer a NOP,
- 	  NULL pointer panic on odd UDCs fixed, two bugs in diagnostic output
- 	  fixed, should initialize correctly if left running, now loadable,
-  	  new memory allocation, extraneous diagnostic output suppressed,
- 	  splx() replaced with save/restore flags. [ Drew ]
-
-	* hosts.c, hosts.h, scsi_ioctl.c, sd.c, sd_ioctl.c, sg.c, sr.c,
-	sr_ioctl.c: Add special junk at end that Emacs will use for
-	formatting the file.
-
-	* qlogic.c: Update to v0.40a.  Improve parity handling.
-
-	* scsi.c: Add Hitachi DK312C to blacklist.  Change "};" to "}" in
-	many places.  Use scsi_init_malloc to get command block - may
-	need this to be dma compatible for some host adapters.
-	Restore interrupts after unregistering a host.
-
-	* sd.c: Use sti instead of restore flags - causes latency problems.
-
-	* seagate.c: Use controller_type to determine string used when
-	registering irq.
-
-	* sr.c: More photo-cd hacks to make sure we get the xa stuff right.
-	* sr.h, sr.c: Change is_xa to xa_flags field.
-
-	* st.c: Disable retries for write operations.
-
-Wed Feb 15 10:52:56 1995  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.92 released.
-
-	* eata.c: Update to 1.17.
-
-	* eata_dma.c: Update to 2.31a. Add more support for /proc/scsi.
-        Continuing modularization. Less crashes because of the bug in the
-        memory management ==> increase C_P_L_CURRENT_MAX to 10
-        and decrease C_P_L_DIV to 4.
-
-	* hosts.c: If we remove last host registered, reuse host number.
-	When freeing memory from host being deregistered, free extra_bytes
-	too.
-
-	* scsi.c (scan_scsis): memset(SDpnt, 0) and set SCmd.device to SDpnt.
-	Change memory allocation to work around bugs in __get_dma_pages.
-	Do not free host if usage count is not zero (for modules).
-
-	* sr_ioctl.c: Increase IOCTL_TIMEOUT to 3000.
-
-	* st.c: Allow for ST_EXTRA_DEVS in st data structures.
-
-	* u14-34f.c: Update to 1.17.
-
-Thu Feb  9 10:11:16 1995  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.91 released.
-
-	* eata.c: Update to 1.16.  Use wish_block instead of host->block.
-
-	* hosts.c: Initialize wish_block to 0.
-
-	* hosts.h: Add wish_block.
-
-	* scsi.c: Use wish_block as indicator that the host should be added
-	to block list.
-
-	* sg.c: Add SG_EXTRA_DEVS to number of slots.
-
-	* u14-34f.c: Use wish_block.
-
-Tue Feb  7 11:46:04 1995  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.90 released.
-
-	* eata.c: Change naming from eata_* to eata2x_*.  Now at vers 1.15.
-	Update interrupt handler to take pt_regs as arg.  Allow blocking
-	even if loaded as module.  Initialize target_time_out array.
-	Do not put sti(); in timing loop.
-
-	* hosts.c: Do not reuse host numbers.
-	Use scsi_make_blocked_list to generate blocking list.
-
-	* script_asm.pl:  Beats me.  Don't know perl.  Something to do with
-	phase index.
-
-	* scsi.c (scsi_make_blocked_list): New function - code copied from
-	hosts.c.
-
-	* scsi.c: Update code to disable photo CD for Toshiba cdroms.
-	Use just manufacturer name, not model number.
-
-	* sr.c: Fix setting density for Toshiba drives.
-
-	* u14-34f.c: Clear target_time_out array during reset.
-
-Wed Feb  1 09:20:45 1995  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.89 released.
-
-	* Makefile, u14-34f.c: Modularize.
-
-	* Makefile, eata.c: Modularize.  Now version 1.14
-
-	* NCR5380.c: Update interrupt handler with new arglist.  Minor
-	cleanups.
-
-	* eata_dma.c: Begin to modularize.  Add hooks for /proc/scsi.
-	New version 2.3.0a. Add code in interrupt handler to allow
-        certain CDROM drivers to be detected which return a
-        CHECK_CONDITION during SCSI bus scan. Add opcode check to get
-        all DATA IN and DATA OUT phases right. Utilize HBA_interpret flag.
-	Improvements in HBA identification. Various other minor stuff.
-
-	* hosts.c: Initialize ->dma_channel and ->io_port when registering
-	a new host.
-
-	* qlogic.c: Modularize and add PCMCIA support.
-
-	* scsi.c: Add Hitachi to blacklist.
-
-	* scsi.c: Change default to no lun scan (too many problem devices).
-
-	* scsi.h: Define QUEUE_FULL condition.
-
-	* sd.c: Do not check for non-existent partition until after
-	new media check.
-
-	* sg.c: Undo previous change which was wrong.
-
-	* sr_ioctl.c: Increase IOCTL_TIMEOUT to 2000.
-
-	* st.c: Patches from Kai - improve filemark handling.
-
-Tue Jan 31 17:32:12 1995  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.88 released.
-
-	* Throughout - spelling/grammar fixups.
-
-	* scsi.c: Make sure that all buffers are 16 byte aligned - some
-	drivers (buslogic) need this.
-
-	* scsi.c (scan_scsis): Remove message printed.
-
-	* scsi.c (scsi_init): Move message here.
-
-Mon Jan 30 06:40:25 1995  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.87 released.
-
-	* sr.c: Photo-cd related changes. (Gerd Knorr??).
-
-	* st.c: Changes from Kai related to EOM detection.
-
-Mon Jan 23 23:53:10 1995  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.86 released.
-
-	* 53c7,8xx.h: Change SG size to 127.
-
-	* eata_dma: Update to version 2.10i. Remove bug in the registration
-        of multiple HBAs and channels. Minor other improvements and stylistic
-        changes.
-
-	* scsi.c: Test for Toshiba XM-3401TA and exclude from detection
-	as toshiba drive - photo cd does not work with this drive.
-
-	* sr.c:  Update photocd code.
-
-Mon Jan 23 23:53:10 1995  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.85 released.
-
-	* st.c, st_ioctl.c, sg.c, sd_ioctl.c, scsi_ioctl.c, hosts.c:
-	include linux/mm.h
-
-	* qlogic.c, buslogic.c, aha1542.c: Include linux/module.h.
-
-Sun Jan 22 22:08:46 1995  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.84 released.
-
-	* Makefile: Support for loadable QLOGIC boards.
-
-	* aha152x.c: Update to version 1.8 from Juergen.
-
-	* eata_dma.c: Update from Michael Neuffer.
-        Remove hard limit of 2 commands per lun and make it better
-        configurable. Improvements in HBA identification.
-
-	* in2000.c: Fix biosparam to support large disks.
-
-	* qlogic.c: Minor changes (change sti -> restore_flags).
-
-Wed Jan 18 23:33:09 1995  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.83 released.
-
-	* aha1542.c(aha1542_intr_handle): Use arguments handed down to find
-	which irq.
-
-	* buslogic.c: Likewise.
-
-	* eata_dma.c: Use min of 2 cmd_per_lun for OCS_enabled boards.
-
-	* scsi.c: Make RECOVERED_ERROR a SUGGEST_IS_OK.
-
-	* sd.c: Fail if we are opening a non-existent partition.
-
-	* sr.c: Bump SR_TIMEOUT to 15000.
-	Do not probe for media size at boot time(hard on changers).
-	Flag device as needing sector size instead.
-
-	* sr_ioctl.c: Remove CDROMMULTISESSION_SYS ioctl.
-
-	* ultrastor.c: Fix bug in call to ultrastor_interrupt (wrong #args).
-
-Mon Jan 16 07:18:23 1995  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.82 released.
-
-	Throughout.
-	- Change all interrupt handlers to accept new calling convention.
-	In particular, we now receive the irq number as one of the arguments.
-
-	* More minor spelling corrections in some of the new files.
-
-	* aha1542.c, buslogic.c: Clean up interrupt handler a little now
-	that we receive the irq as an arg.
-
-	* aha274x.c: s/snarf_region/request_region/
-
-	* eata.c: Update to version 1.12.   Fix some comments and display a
-	message if we cannot reserve the port addresses.
-
-	* u14-34f.c: Update to version 1.13.   Fix some comments and display a
-	message if we cannot reserve the port addresses.
-
-	* eata_dma.c: Define get_board_data function (send INQUIRY command).
-	Use to improve detection of variants of different DPT boards.  Change
-	version subnumber to "0g".
-
-	* fdomain.c:  Update to version 5.26.  Improve detection of some boards
-	repackaged by IBM.
-
-	* scsi.c (scsi_register_host): Change "name" to const char *.
-
-	* sr.c: Fix problem in set mode command for Toshiba drives.
-
-	* sr.c: Fix typo from patch 81.
-
-Fri Jan 13 12:54:46 1995  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.81 released.  Codefreeze for 1.2 release announced.
-
-	Big changes here.
-
-	* eata_dma.*: New files from Michael Neuffer.
-	(neuffer@goofy.zdv.uni-mainz.de).  Should support
-	all eata/dpt cards.
-
-	* hosts.c, Makefile: Add eata_dma.
-
-	* README.st: Document MTEOM.
-
-	Patches from me (ERY) to finish support for low-level loadable scsi.
-	It now works, and is actually useful.
-
-	* Throughout - add new argument to scsi_init_malloc that takes an
-	additional parameter.  This is used as a priority to kmalloc,
-	and you can specify the GFP_DMA flag if you need DMA-able memory.
-
-	* Makefile: For source files that are loadable, always add name
-	to SCSI_SRCS.  Fill in modules: target.
-
-	* hosts.c:  Change next_host to next_scsi_host, and make global.
-	Print hosts after we have identified all of them.  Use info()
-	function if present, otherwise use name field.
-
-	* hosts.h: Change attach function to return int, not void.
-	Define number of device slots to allow for loadable devices.
-	Define tags to tell scsi module code what type of module we
-	are loading.
-
-	* scsi.c: Fix scan_scsis so that it can be run by a user process.
-	Do not use waiting loops - use up and down mechanism as long
-	as current != task[0].
-
-	* scsi.c(scan_scsis): Do not use stack variables for I/O - this
-	could be > 16Mb if we are loading a module at runtime (i.e. use
-	scsi_init_malloc to get some memory we know will be safe).
-
-	* scsi.c: Change dma freelist to be a set of pages.  This allows
-	us to dynamically adjust the size of the list by adding more pages
-	to the pagelist.  Fix scsi_malloc and scsi_free accordingly.
-
-	* scsi_module.c: Fix include.
-
-	* sd.c: Declare detach function.  Increment/decrement module usage
-	count as required.  Fix init functions to allow loaded devices.
-	Revalidate all new disks so we get the partition tables.  Define
-	detach function.
-
-	* sr.c: Likewise.
-
-	* sg.c: Declare detach function.  Allow attachment of devices on
-	loaded drivers.
-
-	* st.c: Declare detach function.  Increment/decrement module usage
-	count as required.
-
-Tue Jan 10 10:09:58 1995  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.79 released.
-
-	Patch from some undetermined individual who needs to get a life :-).
-
-	* sr.c: Attacked by spelling bee...
-
-	Patches from Gerd Knorr:
-
-	* sr.c: make printk messages for photoCD a little more informative.
-
-	* sr_ioctl.c: Fix CDROMMULTISESSION_SYS ioctl.
-
-Mon Jan  9 10:01:37 1995  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.78 released.
-
-	* Makefile: Add empty modules: target.
-
-	* Wheee.  Now change register_iomem to request_region.
-
-	* in2000.c: Bugfix - apparently this is the fix that we have
-	all been waiting for.  It fixes a problem whereby the driver
-	is not stable under heavy load.  Race condition and all that.
-	Patch from Peter Lu.
-
-Wed Jan  4 21:17:40 1995  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.77 released.
-
-	* 53c7,8xx.c: Fix from Linus - emulate splx.
-
-	Throughout:
-
-		Change "snarf_region" with "register_iomem".
-
-	* scsi_module.c: New file.  Contains support for low-level loadable
-	  scsi drivers. [ERY].
-
-	* sd.c: More s/int/long/ changes.
-
-	* seagate.c: Explicitly include linux/config.h
-
-	* sg.c: Increment/decrement module usage count on open/close.
-
-	* sg.c: Be a bit more careful about the user not supplying enough
-	  information for a valid command.  Pass correct size down to
-	  scsi_do_cmd.
-
-	* sr.c:  More changes for Photo-CD.  This apparently breaks NEC drives.
-
-	* sr_ioctl.c:  Support CDROMMULTISESSION ioctl.
-
-
-Sun Jan  1 19:55:21 1995  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.76 released.
-
-	* constants.c: Add type cast in switch statement.
-
-	* scsi.c (scsi_free): Change datatype of "offset" to long.
-	  (scsi_malloc): Change a few more variables to long.  Who
-	  did this and why was it important?  64 bit machines?
-
-
-	Lots of changes to use save_state/restore_state instead of cli/sti.
-	Files changed include:
-
-	* aha1542.c:
-	* aha1740.c:
-	* buslogic.c:
-	* in2000.c:
-	* scsi.c:
-	* scsi_debug.c:
-	* sd.c:
-	* sr.c:
-	* st.c:
-
-Wed Dec 28 16:38:29 1994  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.75 released.
-
-	* buslogic.c: Spelling fix.
-
-	* scsi.c: Add HP C1790A and C2500A scanjet to blacklist.
-
-	* scsi.c: Spelling fixup.
-
-	* sd.c: Add support for sd_hardsizes (hard sector sizes).
-
-	* ultrastor.c: Use save_flags/restore_flags instead of cli/sti.
-
-Fri Dec 23 13:36:25 1994  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.74 released.
-
-	* README.st: Update from Kai Makisara.
-
-	* eata.c: New version from Dario - version 1.11.
-	  use scsicam bios_param routine.  Add support for 2011
-	  and 2021 boards.
-
-	* hosts.c: Add support for blocking.  Linked list automatically
-	  generated when shpnt->block is set.
-
-	* scsi.c: Add sankyo & HP scanjet to blacklist.  Add support for
-	  kicking things loose when we deadlock.
-
-	* scsi.c: Recognize scanners and processors in scan_scsis.
-
-	* scsi_ioctl.h: Increase timeout to 9 seconds.
-
-	* st.c: New version from Kai - add better support for backspace.
-
-	* u14-34f.c: New version from Dario.  Supports blocking.
-
-Wed Dec 14 14:46:30 1994  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.73 released.
-
-	* buslogic.c: Update from Dave Gentzel.  Version 1.14.
-	  Add module related stuff.   More fault tolerant if out of
-	  DMA memory.
-
-	* fdomain.c: New version from Rik Faith - version 5.22.  Add support
-	  for ISA-200S SCSI adapter.
-
-	* hosts.c: Spelling.
-
-	* qlogic.c: Update to version 0.38a.  Add more support for PCMCIA.
-
-	* scsi.c: Mask device type with 0x1f during scan_scsis.
-	  Add support for deadlocking, err, make that getting out of
-	  deadlock situations that are created when we allow the user
-	  to limit requests to one host adapter at a time.
-
-	* scsi.c: Bugfix - pass pid, not SCpnt as second arg to
-	  scsi_times_out.
-
-	* scsi.c: Restore interrupt state to previous value instead of using
-	  cli/sti pairs.
-
-	* scsi.c: Add a bunch of module stuff (all commented out for now).
-
-	* scsi.c: Clean up scsi_dump_status.
-
-Tue Dec  6 12:34:20 1994  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.72 released.
-
-	* sg.c: Bugfix - always use sg_free, since we might have big buff.
-
-Fri Dec  2 11:24:53 1994  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.71 released.
-
-	* sg.c: Clear buff field when not in use.  Only call scsi_free if
-	non-null.
-
-	* scsi.h: Call wake_up(&wait_for_request) when done with a
-	command.
-
-	* scsi.c (scsi_times_out): Pass pid down so that we can protect
-	against race conditions.
-
-	* scsi.c (scsi_abort): Zero timeout field if we get the
-	NOT_RUNNING message back from low-level driver.
-
-
-	* scsi.c (scsi_done): Restore cmd_len, use_sg here.
-
-	* scsi.c (request_sense): Not here.
-
-	* hosts.h: Add new forbidden_addr, forbidden_size fields.  Who
-	added these and why????
-
-	* hosts.c (scsi_mem_init): Mark pages as reserved if they fall in
-	the forbidden regions.  I am not sure - I think this is so that
-	we can deal with boards that do incomplete decoding of their
-	address lines for the bios chips, but I am not entirely sure.
-
-	* buslogic.c: Set forbidden_addr stuff if using a buggy board.
-
-	* aha1740.c: Test for NULL pointer in SCtmp.  This should not
-	occur, but a nice message is better than a kernel segfault.
-
-	* 53c7,8xx.c: Add new PCI chip ID for 815.
-
-Fri Dec  2 11:24:53 1994  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.70 released.
-
-	* ChangeLog, st.c: Spelling.
-
-Tue Nov 29 18:48:42 1994  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.69 released.
-
-	* u14-34f.h: Non-functional change.  [Dario].
-
-	* u14-34f.c: Use block field in Scsi_Host to prevent commands from
-	being queued to more than one host at the same time (used when
-	motherboard does not deal with multiple bus-masters very well).
-	Only when SINGLE_HOST_OPERATIONS is defined.
-	Use new cmd_per_lun field.  [Dario]
-
-	* eata.c: Likewise.
-
-	* st.c: More changes from Kai.  Add ready flag to indicate drive
-	status.
-
-	* README.st: Document this.
-
-	* sr.c: Bugfix (do not subtract CD_BLOCK_OFFSET) for photo-cd
-	code.
-
-	* sg.c: Bugfix - fix problem where opcode is not correctly set up.
-
-	* seagate.[c,h]: Use #defines to set driver name.
-
-	* scsi_ioctl.c: Zero buffer before executing command.
-
-	* scsi.c: Use new cmd_per_lun field in Scsi_Hosts as appropriate.
-	Add Sony CDU55S to blacklist.
-
-	* hosts.h: Add new cmd_per_lun field to Scsi_Hosts.
-
-	* hosts.c: Initialize cmd_per_lun in Scsi_Hosts from template.
-
-	* buslogic.c: Use cmd_per_lun field - initialize to different
-	values depending upon bus type (i.e. use 1 if ISA, so we do not
-	hog memory).  Use other patches which got lost from 1.1.68.
-
-	* aha1542.c: Spelling.
-
-Tue Nov 29 15:43:50 1994  Eric Youngdale  (eric@andante.aib.com)
-
-	* Linux 1.1.68 released.
-
-	Add support for 12 byte vendor specific commands in scsi-generics,
-	more (i.e. the last mandatory) low-level changes to support
-	loadable modules, plus a few other changes people have requested
-	lately.  Changes by me (ERY) unless otherwise noted.  Spelling
-	changes appear from some unknown corner of the universe.
-
-	* Throughout: Change COMMAND_SIZE() to use SCpnt->cmd_len.
-
-	* Throughout: Change info() low level function to take a Scsi_Host
-	pointer.  This way the info function can return specific
-	information about the host in question, if desired.
-
-	* All low-level drivers: Add NULL in initializer for the
-	usage_count field added to Scsi_Host_Template.
-
-	* aha152x.[c,h]: Remove redundant info() function.
-
-	* aha1542.[c,h]: Likewise.
-
-	* aha1740.[c,h]: Likewise.
-
-	* aha274x.[c,h]: Likewise.
-
-	* eata.[c,h]: Likewise.
-
-	* pas16.[c,h]: Likewise.
-
-	* scsi_debug.[c,h]: Likewise.
-
-	* t128.[c,h]: Likewise.
-
-	* u14-34f.[c,h]: Likewise.
-
-	* ultrastor.[c,h]: Likewise.
-
-	* wd7000.[c,h]: Likewise.
-
-	* aha1542.c: Add support for command line options with lilo to set
-	DMA parameters, I/O port.  From Matt Aarnio.
-
-	* buslogic.[c,h]: New version (1.13) from Dave Gentzel.
-
-	* hosts.h: Add new field to Scsi_Hosts "block" to allow blocking
-	all I/O to certain other cards.  Helps prevent problems with some
-	ISA motherboards.
-
-	* hosts.h: Add usage_count to Scsi_Host_Template.
-
-	* hosts.h: Add n_io_port to Scsi_Host (used when releasing module).
-
-	* hosts.c: Initialize block field.
-
-	* in2000.c: Remove "static" declarations from exported functions.
-
-	* in2000.h: Likewise.
-
-	* scsi.c: Correctly set cmd_len field as required.  Save and
-	change setting when doing a request_sense, restore when done.
-	Move abort timeout message.  Fix panic in request_queueable to
-	print correct function name.
-
-	* scsi.c: When incrementing usage count, walk block linked list
-	for host, and or in SCSI_HOST_BLOCK bit.  When decrementing usage
-	count to 0, clear this bit to allow usage to continue, wake up
-	processes waiting.
-
-
-	* scsi_ioctl.c: If we have an info() function, call it, otherwise
-	if we have a "name" field, use it, else do nothing.
-
-	* sd.c, sr.c: Clear cmd_len field prior to each command we
-	generate.
-
-	* sd.h: Add "has_part_table" bit to rscsi_disks.
-
-	* sg.[c,h]: Add support for vendor specific 12 byte commands (i.e.
-	override command length in COMMAND_SIZE).
-
-	* sr.c: Bugfix from Gerd in photocd code.
-
-	* sr.c: Bugfix in get_sectorsize - always use scsi_malloc buffer -
-	we cannot guarantee that the stack is < 16Mb.
-
-Tue Nov 22 15:40:46 1994  Eric Youngdale  (eric@andante.aib.com)
-
-	* Linux 1.1.67 released.
-
-	* sr.c: Change spelling of manufactor to manufacturer.
-
-	* scsi.h: Likewise.
-
-	* scsi.c: Likewise.
-
-	* qlogic.c: Spelling corrections.
-
-	* in2000.h: Spelling corrections.
-
-	* in2000.c: Update from Bill Earnest, change from
-	jshiffle@netcom.com.  Support new bios versions.
-
-	* README.qlogic: Spelling correction.
-
-Tue Nov 22 15:40:46 1994  Eric Youngdale  (eric@andante.aib.com)
-
-	* Linux 1.1.66 released.
-
-	* u14-34f.c: Spelling corrections.
-
-	* sr.[h,c]: Add support for multi-session CDs from Gerd Knorr.
-
-	* scsi.h: Add manufactor field for keeping track of device
-	manufacturer.
-
-	* scsi.c: More spelling corrections.
-
-	* qlogic.h, qlogic.c, README.qlogic: New driver from Tom Zerucha.
-
-	* in2000.c, in2000.h: New driver from Brad McLean/Bill Earnest.
-
-	* fdomain.c: Spelling correction.
-
-	* eata.c: Spelling correction.
-
-Fri Nov 18 15:22:44 1994  Eric Youngdale  (eric@andante.aib.com)
-
-	* Linux 1.1.65 released.
-
-	* eata.h: Update version string to 1.08.00.
-
-	* eata.c: Set sg_tablesize correctly for DPT PM2012 boards.
-
-	* aha274x.seq: Spell checking.
-
-	* README.st: Likewise.
-
-	* README.aha274x: Likewise.
-
-	* ChangeLog: Likewise.
-
-Tue Nov 15 15:35:08 1994  Eric Youngdale  (eric@andante.aib.com)
-
-	* Linux 1.1.64 released.
-
-	* u14-34f.h: Update version number to 1.10.01.
-
-	* u14-34f.c: Use Scsi_Host can_queue variable instead of one from template.
-
-	* eata.[c,h]: New driver for DPT boards from Dario Ballabio.
-
-	* buslogic.c: Use can_queue field.
-
-Wed Nov 30 12:09:09 1994  Eric Youngdale  (eric@andante.aib.com)
-
-	* Linux 1.1.63 released.
-
-	* sd.c: Give I/O error if we attempt 512 byte I/O to a disk with
-	1024 byte sectors.
-
-	* scsicam.c: Make sure we do read from whole disk (mask off
-	partition).
-
-	* scsi.c: Use can_queue in Scsi_Host structure.
-	Fix panic message about invalid host.
-
-	* hosts.c: Initialize can_queue from template.
-
-	* hosts.h: Add can_queue to Scsi_Host structure.
-
-	* aha1740.c: Print out warning about NULL ecbptr.
-
-Fri Nov  4 12:40:30 1994  Eric Youngdale  (eric@andante.aib.com)
-
-	* Linux 1.1.62 released.
-
-	* fdomain.c: Update to version 5.20. (From Rik Faith).  Support
-	BIOS version 3.5.
-
-	* st.h: Add ST_EOD symbol.
-
-	* st.c: Patches from Kai Makisara - support additional densities,
-	add support for MTFSS, MTBSS, MTWSM commands.
-
-	* README.st: Update to document new commands.
-
-	* scsi.c: Add Mediavision CDR-H93MV to blacklist.
-
-Sat Oct 29 20:57:36 1994  Eric Youngdale  (eric@andante.aib.com)
-
-	* Linux 1.1.60 released.
-
-	* u14-34f.[c,h]: New driver from Dario Ballabio.
-
-	* aic7770.c, aha274x_seq.h, aha274x.seq, aha274x.h, aha274x.c,
-	README.aha274x: New files, new driver from John Aycock.
-
-
-Tue Oct 11 08:47:39 1994  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.54 released.
-
-	* Add third PCI chip id.  [Drew]
-
-	* buslogic.c: Set BUSLOGIC_CMDLUN back to 1 [Eric].
-
-	* ultrastor.c: Fix asm directives for new GCC.
-
-	* sr.c, sd.c: Use new end_scsi_request function.
-
-	* scsi.h(end_scsi_request): Return pointer to block if still
-	active, else return NULL if inactive.  Fixes race condition.
-
-Sun Oct  9 20:23:14 1994  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.53 released.
-
-	* scsi.c: Do not allocate dma bounce buffers if we have exactly
-	16Mb.
-
-Fri Sep  9 05:35:30 1994  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.51 released.
-
-	* aha152x.c: Add support for disabling the parity check.  Update
-	to version 1.4. [Juergen].
-
-	* seagate.c: Tweak debugging message.
-
-Wed Aug 31 10:15:55 1994  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.50 released.
-
-	* aha152x.c: Add eb800 for Vtech Platinum SMP boards. [Juergen].
-
-	* scsi.c: Add Quantum PD1225S to blacklist.
-
-Fri Aug 26 09:38:45 1994  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.49 released.
-
-	* sd.c: Fix bug when we were deleting the wrong entry if we
-	get an unsupported sector size device.
-
-	* sr.c: Another spelling patch.
-
-Thu Aug 25 09:15:27 1994  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.48 released.
-
-	* Throughout: Use new semantics for request_dma, as appropriate.
-
-	* sr.c: Print correct device number.
-
-Sun Aug 21 17:49:23 1994  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.47 released.
-
-	* NCR5380.c: Add support for LIMIT_TRANSFERSIZE.
-
-	* constants.h: Add prototype for print_Scsi_Cmnd.
-
-	* pas16.c: Some more minor tweaks.  Test for Mediavision board.
-	Allow for disks > 1Gb.  [Drew??]
-
-	* sr.c: Set SCpnt->transfersize.
-
-Tue Aug 16 17:29:35 1994  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.46 released.
-
-	* Throughout: More spelling fixups.
-
-	* buslogic.c: Add a few more fixups from Dave.  Disk translation
-	mainly.
-
-	* pas16.c: Add a few patches (Drew?).
-
-
-Thu Aug 11 20:45:15 1994  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.44 released.
-
-	* hosts.c: Add type casts for scsi_init_malloc.
-
-	* scsicam.c: Add type cast.
-
-Wed Aug 10 19:23:01 1994  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.43 released.
-
-	* Throughout: Spelling cleanups. [??]
-
-	* aha152x.c, NCR53*.c, fdomain.c, g_NCR5380.c, pas16.c, seagate.c,
-	 t128.c: Use request_irq, not irqaction. [??]
-
-	* aha1542.c: Move test for shost before we start to use shost.
-
-	* aha1542.c, aha1740.c, ultrastor.c, wd7000.c: Use new
-	calling sequence for request_irq.
-
-	* buslogic.c: Update from Dave Gentzel.
-
-Tue Aug  9 09:32:59 1994  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.42 released.
-
-	* NCR5380.c: Change NCR5380_print_status to static.
-
-	* seagate.c: A few more bugfixes.  Only Drew knows what they are
-	for.
-
-	* ultrastor.c: Tweak some __asm__ directives so that it works
-	with newer compilers. [??]
-
-Sat Aug  6 21:29:36 1994  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.40 released.
-
-	* NCR5380.c: Return SCSI_RESET_WAKEUP from reset function.
-
-	* aha1542.c: Reset mailbox status after a bus device reset.
-
-	* constants.c: Fix typo (;;).
-
-	* g_NCR5380.c:
-	* pas16.c:  Correct usage of NCR5380_init.
-
-	* scsi.c: Remove redundant (and unused variables).
-
-	* sd.c: Use memset to clear all of rscsi_disks before we use it.
-
-	* sg.c: Ditto, except for scsi_generics.
-
-	* sr.c: Ditto, except for scsi_CDs.
-
-	* st.c: Initialize STp->device.
-
-	* seagate.c: Fix bug. [Drew]
-
-Thu Aug  4 08:47:27 1994  Eric Youngdale  (eric@andante)
-
-	* Linux 1.1.39 released.
-
-	* Makefile: Fix typo in NCR53C7xx.
-
-	* st.c: Print correct number for device.
-
-Tue Aug  2 11:29:14 1994  Eric Youngdale  (eric@esp22)
-
-	* Linux 1.1.38 released.
-
-	Lots of changes in 1.1.38.  All from Drew unless otherwise noted.
-
-	* 53c7,8xx.c: New file from Drew.  PCI driver.
-
-	* 53c7,8xx.h: Likewise.
-
-	* 53c7,8xx.scr: Likewise.
-
-	* 53c8xx_d.h, 53c8xx_u.h, script_asm.pl: Likewise.
-
-	* scsicam.c: New file from Drew.  Read block 0 on the disk and
-	read the partition table.  Attempt to deduce the geometry from
-	the partition table if possible.  Only used by 53c[7,8]xx right
-	now, but could be used by any device for which we have no way
-	of identifying the geometry.
-
-	* sd.c: Use device letters instead of sd%d in a lot of messages.
-
-	* seagate.c: Fix bug that resulted in lockups with some devices.
-
-	* sr.c (sr_open): Return -EROFS, not -EACCES if we attempt to open
-	device for write.
-
-	* hosts.c, Makefile: Update for new driver.
-
-	* NCR5380.c, NCR5380.h, g_NCR5380.h: Update from Drew to support
-	53C400 chip.
-
-	* constants.c: Define CONST_CMND and CONST_MSG.  Other minor
-	cleanups along the way.  Improve handling of CONST_MSG.
-
-	* fdomain.c, fdomain.h: New version from Rik Faith.  Update to
-	5.18.  Should now support TMC-3260 PCI card with 18C30 chip.
-
-	* pas16.c: Update with new irq initialization.
-
-	* t128.c: Update with minor cleanups.
-
-	* scsi.c (scsi_pid): New variable - gives each command a unique
-	id. Add Quantum LPS5235S to blacklist.  Change in_scan to
-	in_scan_scsis and make global.
-
-	* scsi.h: Add some defines for extended message handling,
-	INITIATE/RELEASE_RECOVERY.  Add a few new fields to support sync
-	transfers.
-
-	* scsi_ioctl.h: Add ioctl to request synchronous transfers.
-
-
-Tue Jul 26 21:36:58 1994  Eric Youngdale  (eric@esp22)
-
-	* Linux 1.1.37 released.
-
-	* aha1542.c: Always call aha1542_mbenable, use new udelay
-	mechanism so we do not wait a long time if the board does not
-	implement this command.
-
-	* g_NCR5380.c: Remove #include <linux/config.h> and #if
-	defined(CONFIG_SCSI_*).
-
-	* seagate.c: Likewise.
-
-	Next round of changes to support loadable modules.  Getting closer
-	now, still not possible to do anything remotely usable.
-
-	hosts.c: Create a linked list of detected high level devices.
-	(scsi_register_device): New function to insert into this list.
-	(scsi_init): Call scsi_register_device for each of the known high
-	level drivers.
-
-	hosts.h: Add prototype for linked list header.  Add structure
-	definition for device template structure which defines the linked
-	list.
-
-	scsi.c: (scan_scsis): Use linked list instead of knowledge about
-	existing high level device drivers.
-	(scsi_dev_init): Use init functions for drivers on linked list
-	instead of explicit list to initialize and attach devices to high
-	level drivers.
-
-	scsi.h: Add new field "attached" to scsi_device - count of number
-	of high level devices attached.
-
-	sd.c, sr.c, sg.c, st.c: Adjust init/attach functions to use new
-	scheme.
-
-Sat Jul 23 13:03:17 1994  Eric Youngdale  (eric@esp22)
-
-	* Linux 1.1.35 released.
-
-	* ultrastor.c: Change constraint on asm() operand so that it works
-	with gcc 2.6.0.
-
-Thu Jul 21 10:37:39 1994  Eric Youngdale  (eric@esp22)
-
-	* Linux 1.1.33 released.
-
-	* sr.c(sr_open): Do not allow opens with write access.
-
-Mon Jul 18 09:51:22 1994  Eric Youngdale  (eric@esp22)
-
-	* Linux 1.1.31 released.
-
-	* sd.c: Increase SD_TIMEOUT from 300 to 600.
-
-	* sr.c: Remove stray task_struct* variable that was no longer
-	used.
-
-	* sr_ioctl.c: Fix typo in up() call.
-
-Sun Jul 17 16:25:29 1994  Eric Youngdale  (eric@esp22)
-
-	* Linux 1.1.30 released.
-
-	* scsi.c (scan_scsis): Fix detection of some Toshiba CDROM drives
-	that report themselves as disk drives.
-
-	* (Throughout): Use request.sem instead of request.waiting.
-	Should fix swap problem with fdomain.
-
-Thu Jul 14 10:51:42 1994  Eric Youngdale  (eric@esp22)
-
-	* Linux 1.1.29 released.
-
-	* scsi.c (scan_scsis): Add new devices to end of linked list, not
-	to the beginning.
-
-	* scsi.h (SCSI_SLEEP): Remove brain dead hack to try to save
-	the task state before sleeping.
-
-Sat Jul  9 15:01:03 1994  Eric Youngdale  (eric@esp22)
-
-	More changes to eventually support loadable modules.  Mainly
-	we want to use linked lists instead of arrays because it is easier
-	to dynamically add and remove things this way.
-
-	Quite a bit more work is needed before loadable modules are
-	possible (and usable) with scsi, but this is most of the grunge
-	work.
-
-	* Linux 1.1.28 released.
-
-	* scsi.c, scsi.h (allocate_device, request_queueable): Change
-	argument from index into scsi_devices to a pointer to the
-	Scsi_Device struct.
-
-	* Throughout: Change all calls to allocate_device,
-	request_queueable to use new calling sequence.
-
-	* Throughout: Use SCpnt->device instead of
-	scsi_devices[SCpnt->index].  Ugh - the pointer was there all along
-	- much cleaner this way.
-
-	* scsi.c (scsi_init_malloc, scsi_free_malloc): New functions -
-	allow us to pretend that we have a working malloc when we
-	initialize.  Use this instead of passing memory_start, memory_end
-	around all over the place.
-
-	* scsi.h, st.c, sr.c, sd.c, sg.c: Change *_init1 functions to use
-	scsi_init_malloc, remove all arguments, no return value.
-
-	* scsi.h: Remove index field from Scsi_Device and Scsi_Cmnd
-	structs.
-
-	* scsi.c (scsi_dev_init): Set up for scsi_init_malloc.
-	(scan_scsis): Get SDpnt from scsi_init_malloc, and refresh
-	when we discover a device.  Free pointer before returning.
-	Change scsi_devices into a linked list.
-
-	* scsi.c (scan_scsis): Change to only scan one host.
-	(scsi_dev_init): Loop over all detected hosts, and scan them.
-
-	* hosts.c  (scsi_init_free): Change so that  number of extra bytes
-	is stored in struct, and we do not have to pass it each time.
-
-	* hosts.h: Change Scsi_Host_Template struct to include "next" and
-	"release" functions.  Initialize to NULL in all low level
-	adapters.
-
-	* hosts.c: Rename scsi_hosts to builtin_scsi_hosts, create linked
-	list scsi_hosts, linked together with the new "next" field.
-
-Wed Jul  6 05:45:02 1994  Eric Youngdale  (eric@esp22)
-
-	* Linux 1.1.25 released.
-
-	* aha152x.c: Changes from Juergen - cleanups and updates.
-
-	* sd.c, sr.c: Use new check_media_change and revalidate
-	file_operations fields.
-
-	* st.c, st.h: Add changes from Kai Makisara, dated Jun 22.
-
-	* hosts.h: Change SG_ALL back to 0xff.  Apparently soft error
-	in /dev/brain resulted in having this bumped up.
-	Change first parameter in bios_param function to be Disk * instead
-	of index into rscsi_disks.
-
-	* sd_ioctl.c: Pass pointer to rscsi_disks element instead of index
-	to array.
-
-	* sd.h: Add struct name "scsi_disk" to typedef for Scsi_Disk.
-
-	* scsi.c: Remove redundant Maxtor XT8760S from blacklist.
-	In scsi_reset, add printk when DEBUG defined.
-
-	* All low level drivers: Modify definitions of bios_param in
-	appropriate way.
-
-Thu Jun 16 10:31:59 1994  Eric Youngdale  (eric@esp22)
-
-	* Linux 1.1.20 released.
-
-	* scsi_ioctl.c: Only pass down the actual number of characters
-	required to scsi_do_cmd, not the one rounded up to a even number
-	of sectors.
-
-	* ultrastor.c: Changes from Caleb Epstein for 24f cards.  Support
-	larger SG lists.
-
-	* ultrastor.c: Changes from me - use scsi_register to register
-	host.  Add some consistency checking,
-
-Wed Jun  1 21:12:13 1994  Eric Youngdale  (eric@esp22)
-
-	* Linux 1.1.19 released.
-
-	* scsi.h: Add new return code for reset() function:
-	SCSI_RESET_PUNT.
-
-	* scsi.c: Make SCSI_RESET_PUNT the same as SCSI_RESET_WAKEUP for
-	now.
-
-	* aha1542.c: If the command responsible for the reset is not
-	pending, return SCSI_RESET_PUNT.
-
-	* aha1740.c, buslogic.c, wd7000.c, ultrastor.c: Return
-	SCSI_RESET_PUNT instead of SCSI_RESET_SNOOZE.
-
-Tue May 31 19:36:01 1994  Eric Youngdale  (eric@esp22)
-
-	* buslogic.c: Do not print out message about "must be Adaptec"
-	if we have detected a buslogic card.  Print out a warning message
-	if we are configuring for >16Mb, since the 445S at board level
-	D or earlier does not work right.  The "D" level board can be made
-	to work by flipping an undocumented switch, but this is too subtle.
-
-    Changes based upon patches in Yggdrasil distribution.
-
-	* sg.c, sg.h: Return sense data to user.
-
-	* aha1542.c, aha1740.c, buslogic.c: Do not panic if
-	sense buffer is wrong size.
-
-	* hosts.c: Test for ultrastor card before any of the others.
-
-	* scsi.c: Allow boot-time option for max_scsi_luns=? so that
-	buggy firmware has an easy work-around.
-
-Sun May 15 20:24:34 1994  Eric Youngdale  (eric@esp22)
-
-	* Linux 1.1.15 released.
-
-	Post-codefreeze thaw...
-
-	* buslogic.[c,h]: New driver from David Gentzel.
-
-	* hosts.h: Add use_clustering field to explicitly say whether
-	clustering should be used for devices attached to this host
-	adapter.  The buslogic board apparently supports large SG lists,
-	but it is apparently faster if sd.c condenses this into a smaller
-	list.
-
-	* sd.c: Use this field instead of heuristic.
-
-	* All host adapter include files: Add appropriate initializer for
-	use_clustering field.
-
-	* scsi.h: Add #defines for return codes for the abort and reset
-	functions.  There are now a specific set of return codes to fully
-	specify all of the possible things that the low-level adapter
-	could do.
-
-	* scsi.c: Act based upon return codes from abort/reset functions.
-
-	* All host adapter abort/reset functions: Return new return code.
-
-	* Add code in scsi.c to help debug timeouts.  Use #define
-	DEBUG_TIMEOUT to enable this.
-
-	* scsi.c: If the host->irq field is set, use
-	disable_irq/enable_irq before calling queuecommand if we
-	are not already in an interrupt.  Reduce races, and we
-	can be sloppier about cli/sti in the interrupt routines now
-	(reduce interrupt latency).
-
-	* constants.c: Fix some things to eliminate warnings.  Add some
-	sense descriptions that were omitted before.
-
-	* aha1542.c: Watch for SCRD from host adapter - if we see it, set
-	a flag.  Currently we only print out the number of pending
-	commands that might need to be restarted.
-
-	* aha1542.c (aha1542_abort): Look for lost interrupts, OGMB still
-	full, and attempt to recover.  Otherwise give up.
-
-	* aha1542.c (aha1542_reset): Try BUS DEVICE RESET, and then pass
-	DID_RESET back up to the upper level code for all commands running
-	on this target (even on different LUNs).
-
-Sat May  7 14:54:01 1994
-
-	* Linux 1.1.12 released.
-
-	* st.c, st.h: New version from Kai.  Supports boot time
-	specification of number of buffers.
-
-	* wd7000.[c,h]: Updated driver from John Boyd.  Now supports
-	more than one wd7000 board in machine at one time, among other things.
-
-Wed Apr 20 22:20:35 1994
-
-	* Linux 1.1.8 released.
-
-	* sd.c: Add a few type casts where scsi_malloc is called.
-
-Wed Apr 13 12:53:29 1994
-
-	* Linux 1.1.4 released.
-
-	* scsi.c: Clean up a few printks (use %p to print pointers).
-
-Wed Apr 13 11:33:02 1994
-
-	* Linux 1.1.3 released.
-
-	* fdomain.c: Update to version 5.16 (Handle different FIFO sizes
-	better).
-
-Fri Apr  8 08:57:19 1994
-
-	* Linux 1.1.2 released.
-
-	* Throughout: SCSI portion of cluster diffs added.
-
-Tue Apr  5 07:41:50 1994
-
-	* Linux 1.1 development tree initiated.
-
-	* The linux 1.0 development tree is now effectively frozen except
-	for obvious bugfixes.
-
-******************************************************************
-******************************************************************
-******************************************************************
-******************************************************************
-
-Sun Apr 17 00:17:39 1994
-
-	* Linux 1.0, patchlevel 9 released.
-
-	* fdomain.c: Update to version 5.16 (Handle different FIFO sizes
-	better).
-
-Thu Apr  7 08:36:20 1994
-
-	* Linux 1.0, patchlevel8 released.
-
-	* fdomain.c: Update to version 5.15 from 5.9.  Handles 3.4 bios.
-
-Sun Apr  3 14:43:03 1994
-
-	* Linux 1.0, patchlevel6 released.
-
-	* wd7000.c: Make stab at fixing race condition.
-
-Sat Mar 26 14:14:50 1994
-
-	* Linux 1.0, patchlevel5 released.
-
-	* aha152x.c, Makefile: Fix a few bugs (too much data message).
-	Add a few more bios signatures. (Patches from Juergen).
-
-	* aha1542.c: Fix race condition in aha1542_out.
-
-Mon Mar 21 16:36:20 1994
-
-	* Linux 1.0, patchlevel3 released.
-
-	* sd.c, st.c, sr.c, sg.c: Return -ENXIO, not -ENODEV if we attempt
-	to open a non-existent device.
-
-	* scsi.c: Add Chinon cdrom to blacklist.
-
-	* sr_ioctl.c: Check return status of verify_area.
-
-Sat Mar  6 16:06:19 1994
-
-	* Linux 1.0 released (technically a pre-release).
-
-	* scsi.c: Add IMS CDD521, Maxtor XT-8760S to blacklist.
-
-Tue Feb 15 10:58:20 1994
-
-        * pl15e released.
-
-        * aha1542.c: For 1542C, allow dynamic device scan with >1Gb turned
-	off.
-
-	* constants.c: Fix typo in definition of CONSTANTS.
-
-        * pl15d released.
-
-Fri Feb 11 10:10:16 1994
-
-        * pl15c released.
-
-	* scsi.c: Add Maxtor XT-3280 and Rodime RO3000S to blacklist.
-
-	* scsi.c: Allow tagged queueing for scsi 3 devices as well.
-	Some really old devices report a version number of 0.  Disallow
-	LUN != 0 for these.
-
-Thu Feb 10 09:48:57 1994
-
-        * pl15b released.
-
-Sun Feb  6 12:19:46 1994
-
-        * pl15a released.
-
-Fri Feb  4 09:02:17 1994
-
-        * scsi.c: Add Teac cdrom to blacklist.
-
-Thu Feb  3 14:16:43 1994
-
-	* pl15 released.
-
-Tue Feb  1 15:47:43 1994
-
-	* pl14w released.
-
-	* wd7000.c (wd_bases): Fix typo in last change.
-
-Mon Jan 24 17:37:23 1994
-
-	* pl14u released.
-
-	* aha1542.c: Support 1542CF/extended bios.  Different from 1542C
-
-	* wd7000.c: Allow bios at 0xd8000 as well.
-
-	* ultrastor.c: Do not truncate cylinders to 1024.
-
-	* fdomain.c: Update to version 5.9 (add new bios signature).
-
-	* NCR5380.c: Update from Drew - should work a lot better now.
-
-Sat Jan  8 15:13:10 1994
-
-	* pl14o released.
-
-	* sr_ioctl.c: Zero reserved field before trying to set audio volume.
-
-Wed Jan  5 13:21:10 1994
-
-	* pl14m released.
-
-	* fdomain.c: Update to version 5.8.  No functional difference???
-
-Tue Jan  4 14:26:13 1994
-
-	* pl14l released.
-
-	* ultrastor.c: Remove outl, inl functions (now provided elsewhere).
-
-Mon Jan  3 12:27:25 1994
-
-	* pl14k released.
-
-	* aha152x.c: Remove insw and outsw functions.
-
-	* fdomain.c: Ditto.
-
-Wed Dec 29 09:47:20 1993
-
-	* pl14i released.
-
-	* scsi.c: Support RECOVERED_ERROR for tape drives.
-
-	* st.c: Update of tape driver from Kai.
-
-Tue Dec 21 09:18:30 1993
-
-	* pl14g released.
-
-	* aha1542.[c,h]: Support extended BIOS stuff.
-
-	* scsi.c: Clean up messages about disks, so they are displayed as
-	sda, sdb, etc instead of sd0, sd1, etc.
-
-	* sr.c:  Force reread of capacity if disk was changed.
-	Clear buffer before asking for capacity/sectorsize (some drives
-	do not report this properly).  Set needs_sector_size flag if
-	drive did not return sensible sector size.
-
-Mon Dec 13 12:13:47 1993
-
-	* aha152x.c: Update to version .101 from Juergen.
-
-Mon Nov 29 03:03:00 1993
-
-        * linux 0.99.14 released.
-
-	* All scsi stuff moved from kernel/blk_drv/scsi to drivers/scsi.
-
-	* Throughout: Grammatical corrections to various comments.
-
-	* Makefile: fix so that we do not need to compile things we are
-	not going to use.
-
-	* NCR5380.c, NCR5380.h, g_NCR5380.c, g_NCR5380.h, pas16.c,
-	pas16.h, t128.c, t128.h:  New files from Drew.
-
-	* aha152x.c, aha152x.h: New files from Juergen Fischer.
-
-	* aha1542.c: Support for more than one 1542 in the machine
-	at the same time.  Make functions static that do not need
-	visibility.
-
-	* aha1740.c: Set NEEDS_JUMPSTART flag in reset function, so we
-	know to restart the command.  Change prototype of aha1740_reset
-	to take a command pointer.
-
-	* constants.c: Clean up a few things.
-
-	* fdomain.c: Update to version 5.6.  Move snarf_region.  Allow
-	board to be set at different SCSI ids.  Remove support for
-	reselection (did not work well).  Set JUMPSTART flag in reset
-	code.
-
-	* hosts.c: Support new low-level adapters.  Allow for more than
-	one adapter of a given type.
-
-	* hosts.h: Allow for more than one adapter of a given type.
-
-	* scsi.c:  Add scsi_device_types array, if NEEDS_JUMPSTART is set
-	after a low-level reset, start the command again.  Sort blacklist,
-	and add Maxtor MXT-1240S, XT-4170S, NEC CDROM 84, Seagate ST157N.
-
-	* scsi.h: Add constants for tagged queueing.
-
-	* Throughout: Use constants from major.h instead of hardcoded
-	numbers for major numbers.
-
-	* scsi_ioctl.c: Fix bug in buffer length in ioctl_command.  Use
-	verify_area in GET_IDLUN ioctl.  Add new ioctls for
-	TAGGED_QUEUE_ENABLE, DISABLE.  Only allow IOCTL_SEND_COMMAND by
-	superuser.
-
-	* sd.c: Only pay attention to UNIT_ATTENTION for removable disks.
-	Fix bug where sometimes portions of blocks would get lost
-	resulting in processes hanging.  Add messages when we spin up a
-	disk, and fix a bug in the timing.  Increase read-ahead for disks
-	that are on a scatter-gather capable host adapter.
-
-	* seagate.c: Fix so that some parameters can be set from the lilo
-	prompt.  Supply jumpstart flag if we are resetting and need the
-	command restarted.   Fix so that we return 1 if we detect a card
-	so that multiple card detection works correctly.  Add yet another
-	signature for FD cards (950).  Add another signature for ST0x.
-
-	* sg.c, sg.h: New files from Lawrence Foard for generic scsi
-	access.
-
-	* sr.c:  Add type casts for (void*) so that we can do pointer
-	arithmetic.  Works with GCC without this, but it is not strictly
-	correct.  Same bugfix as was in sd.c.  Increase read-ahead a la
-	disk driver.
-
-	* sr_ioctl.c: Use scsi_malloc buffer instead of buffer from stack
-	since we cannot guarantee that the stack is < 16Mb.
-
-	ultrastor.c: Update to support 24f properly (JFC's driver).
-
-	wd7000.c: Supply jumpstart flag for reset.  Do not round up
-	number of cylinders in biosparam function.
-
-Sat Sep  4 20:49:56 1993
-
-    * 0.99pl13 released.
-
-    * Throughout:  Use check_region/snarf_region for all low-level
-    drivers.
-
-    * aha1542.c: Do hard reset instead of soft (some ethercard probes
-    screw us up).
-
-    * scsi.c: Add new flag ASKED_FOR_SENSE so that we can tell if we are
-    in a loop whereby the device returns null sense data.
-
-    * sd.c: Add code to spin up a drive if it is not already spinning.
-    Do this one at a time to make it easier on power supplies.
-
-    * sd_ioctl.c: Use sync_dev instead of fsync_dev in BLKFLSBUF ioctl.
-
-    * seagate.c: Switch around DATA/CONTROL lines.
-
-    * st.c: Change sense to unsigned.
-
-Thu Aug  5 11:59:18 1993
-
-    * 0.99pl12 released.
-
-    * constants.c, constants.h: New files with ascii descriptions of
-    various conditions.
-
-    * Makefile: Do not try to count the number of low-level drivers,
-    just generate the list of .o files.
-
-    * aha1542.c: Replace 16 with sizeof(SCpnt->sense_buffer).  Add tests
-    for addresses > 16Mb, panic if we find one.
-
-    * aha1740.c: Ditto with sizeof().
-
-    * fdomain.c: Update to version 3.18.  Add new signature, register IRQ
-    with irqaction.  Use ID 7 for new board.  Be more intelligent about
-    obtaining the h/s/c numbers for biosparam.
-
-    * hosts.c: Do not depend upon Makefile generated count of the number
-    of low-level host adapters.
-
-    * scsi.c: Use array for scsi_command_size instead of a function.  Add
-    Texel cdrom and Maxtor XT-4380S to blacklist.  Allow compile time
-    option for no-multi lun scan.  Add semaphore for possible problems
-    with handshaking, assume device is faulty until we know it not to be
-    the case.  Add DEBUG_INIT symbol to dump info as we scan for devices.
-    Zero sense buffer so we can tell if we need to request it.  When
-    examining sense information, request sense if buffer is all zero.
-    If RESET, request sense information to see what to do next.
-
-    * scsi_debug.c: Change some constants to use symbols like INT_MAX.
-
-    * scsi_ioctl.c (kernel_scsi_ioctl): New function -for making ioctl
-    calls from kernel space.
-
-    * sd.c: Increase timeout to 300.  Use functions in constants.h to
-    display info.  Use scsi_malloc buffer for READ_CAPACITY, since
-    we cannot guarantee that a stack based buffer is < 16Mb.
-
-    * sd_ioctl.c: Add BLKFLSBUF ioctl.
-
-    * seagate.c: Add new compile time options for ARBITRATE,
-    SLOW_HANDSHAKE, and SLOW_RATE.  Update assembly loops for transferring
-    data.  Use kernel_scsi_ioctl to request mode page with geometry.
-
-    * sr.c: Use functions in constants.c to display messages.
-
-    * st.c: Support for variable block size.
-
-    * ultrastor.c: Do not use cache for tape drives.  Set
-    unchecked_isa_dma flag, even though this may not be needed (gets set
-    later).
-
-Sat Jul 17 18:32:44 1993
-
-    * 0.99pl11 released.  C++ compilable.
-
-    * Throughout: Add type casts all over the place, and use "ip" instead
-    of "info" in the various biosparam functions.
-
-    * Makefile: Compile seagate.c with C++ compiler.
-
-    * aha1542.c: Always set ccb pointer as this gets trashed somehow on
-    some systems.  Add a few type casts.  Update biosparam function a little.
-
-    * aha1740.c: Add a few type casts.
-
-    * fdomain.c: Update to version 3.17 from 3.6.  Now works with
-    TMC-18C50.
-
-    * scsi.c: Minor changes here and there with datatypes.  Save use_sg
-    when requesting sense information so that this can properly be
-    restored if we retry the command.  Set aside dma buffers assuming each
-    block is 1 page, not 1Kb minix block.
-
-    * scsi_ioctl.c: Add a few type casts.  Other minor changes.
-
-    * sd.c:  Correctly  free all scsi_malloc'd memory if we run out of
-    dma_pool. Store blocksize information for each partition.
-
-    * seagate.c: Minor cleanups here and there.
-
-    * sr.c: Set up blocksize array for all discs.  Fix bug in freeing
-    buffers if we run out of dma pool.
-
-Thu Jun  2 17:58:11 1993
-
-    * 0.99pl10 released.
-
-    * aha1542.c: Support for BT 445S (VL-bus board with no dma channel).
-
-    * fdomain.c: Upgrade to version 3.6. Preliminary support for TNC-18C50.
-
-    * scsi.c: First attempt to fix problem with old_use_sg.  Change
-    NOT_READY to a SUGGEST_ABORT.  Fix timeout race where time might
-    get decremented past zero.
-
-    * sd.c: Add block_fsync function to dispatch table.
-
-    * sr.c: Increase timeout to 500 from 250.  Add entry for sync in
-    dispatch table (supply NULL).  If we do not have a sectorsize,
-    try to get it in the sd_open function.  Add new function just to
-    obtain sectorsize.
-
-    * sr.h: Add needs_sector_size semaphore.
-
-    * st.c: Add NULL for fsync in dispatch table.
-
-    * wd7000.c: Allow another condition for power on that are normal
-    and do not require a panic.
-
-Thu Apr 22 23:10:11 1993
-
-    * 0.99pl9 released.
-
-    * aha1542.c: Use (void) instead of () in setup_mailboxes.
-
-    * scsi.c: Initialize transfersize and underflow fields in SCmd to 0.
-    Do not panic for unsupported message bytes.
-
-    * scsi.h: Allocate 12 bytes instead of 10 for commands.  Add
-    transfersize and underflow fields.
-
-    * scsi_ioctl.c: Further bugfix to ioctl_probe.
-
-    * sd.c: Use long instead of int for last parameter in sd_ioctl.
-    Initialize transfersize and underflow fields.
-
-    * sd_ioctl.c: Ditto for sd_ioctl(,,,,);
-
-    * seagate.c: New version from Drew.  Includes new signatures for FD
-    cards.  Support for 0ws jumper. Correctly initialize
-    scsi_hosts[hostnum].this_id.  Improved handing of
-    disconnect/reconnect, and support command linking.  Use
-    transfersize and underflow fields.  Support scatter-gather.
-
-    * sr.c, sr_ioctl.c: Use long instead of int for last parameter in sr_ioctl.
-    Use buffer and buflength in do_ioctl.  Patches from Chris Newbold for
-    scsi-2 audio commands.
-
-    * ultrastor.c: Comment out in_byte (compiler warning).
-
-    * wd7000.c: Change () to (void) in wd7000_enable_dma.
-
-Wed Mar 31 16:36:25 1993
-
-    * 0.99pl8 released.
-
-    * aha1542.c: Handle mailboxes better for 1542C.
-        Do not truncate number of cylinders at 1024 for biosparam call.
-
-    * aha1740.c: Fix a few minor bugs for multiple devices.
-        Same as above for biosparam.
-
-    * scsi.c: Add lockable semaphore for removable devices that can have
-    media removal prevented.  Add another signature for flopticals.
-    (allocate_device): Fix race condition.  Allow more space in dma pool
-    for blocksizes of up to 4Kb.
-
-    * scsi.h: Define COMMAND_SIZE.  Define a SCSI specific version of
-    INIT_REQUEST that can run with interrupts off.
-
-    * scsi_ioctl.c: Make ioctl_probe function more idiot-proof.  If
-    a removable device says ILLEGAL REQUEST to a door-locking command,
-    clear lockable flag.  Add SCSI_IOCTL_GET_IDLUN ioctl.  Do not attempt
-    to lock door for devices that do not have lockable semaphore set.
-
-    * sd.c: Fix race condition for multiple disks.  Use INIT_SCSI_REQUEST
-    instead of INIT_REQUEST.  Allow sector sizes of 1024 and 256.  For
-    removable disks that are not ready, mark them as having a media change
-    (some drives do not report this later).
-
-    * seagate.c: Use volatile keyword for memory-mapped register pointers.
-
-    * sr.c: Fix race condition, a la sd.c.  Increase the number of retries
-    to 1.  Use INIT_SCSI_REQUEST.  Allow 512 byte sector sizes.  Do a
-    read_capacity when we init the device so we know the size and
-    sectorsize.
-
-    * st.c: If ioctl not found in st.c, try scsi_ioctl for others.
-
-    * ultrastor.c: Do not truncate number of cylinders at 1024 for
-    biosparam call.
-
-    * wd7000.c: Ditto.
-    Throughout: Use COMMAND_SIZE macro to determine length of scsi
-    command.
-
-
-
-Sat Mar 13 17:31:29 1993
-
-    * 0.99pl7 released.
-
-    Throughout: Improve punctuation in some messages, and use new
-    verify_area syntax.
-
-    * aha1542.c: Handle unexpected interrupts better.
-
-    * scsi.c: Ditto.  Handle reset conditions a bit better, asking for
-    sense information and retrying if required.
-
-    * scsi_ioctl.c: Allow for 12 byte scsi commands.
-
-    * ultrastor.c: Update to use scatter-gather.
-
-Sat Feb 20 17:57:15 1993
-
-    * 0.99pl6 released.
-
-    * fdomain.c: Update to version 3.5.  Handle spurious interrupts
-    better.
-
-    * sd.c: Use register_blkdev function.
-
-    * sr.c: Ditto.
-
-    * st.c: Use register_chrdev function.
-
-    * wd7000.c: Undo previous change.
-
-Sat Feb  6 11:20:43 1993
-
-    * 0.99pl5 released.
-
-    * scsi.c: Fix bug in testing for UNIT_ATTENTION.
-
-    * wd7000.c: Check at more addresses for bios.  Fix bug in biosparam
-    (heads & sectors turned around).
-
-Wed Jan 20 18:13:59 1993
-
-    * 0.99pl4 released.
-
-    * scsi.c: Ignore leading spaces when looking for blacklisted devices.
-
-    * seagate.c: Add a few new signatures for FD cards.  Another patch
-    with SCint to fix race condition.  Use recursion_depth to keep track
-    of how many times we have been recursively called, and do not start
-    another command unless we are on the outer level.  Fixes bug
-    with Syquest cartridge drives (used to crash kernel), because
-    they do not disconnect with large data transfers.
-
-Tue Jan 12 14:33:36 1993
-
-    * 0.99pl3 released.
-
-    * fdomain.c: Update to version 3.3 (a few new signatures).
-
-    * scsi.c: Add CDU-541, Denon DRD-25X to blacklist.
-    (allocate_request, request_queueable): Init request.waiting to NULL if
-    non-buffer type of request.
-
-    * seagate.c:  Allow controller to be overridden with CONTROLLER symbol.
-    Set SCint=NULL when we are done, to remove race condition.
-
-    * st.c: Changes from Kai.
-
-Wed Dec 30 20:03:47 1992
-
-    * 0.99pl2 released.
-
-    * scsi.c: Blacklist back in.  Remove Newbury drive as other bugfix
-    eliminates need for it here.
-
-    * sd.c: Return ENODEV instead of EACCES if no such device available.
-    (sd_init) Init blkdev_fops earlier so that sd_open is available sooner.
-
-    * sr.c: Same as above for sd.c.
-
-    * st.c: Return ENODEV instead of ENXIO if no device.  Init chrdev_fops
-    sooner, so that it is always there even if no tapes.
-
-    * seagate.c (controller_type): New variable to keep track of ST0x or
-    FD.  Modify signatures list to indicate controller type, and init
-    controller_type once we find a match.
-
-    * wd7000.c (wd7000_set_sync): Remove redundant function.
-
-Sun Dec 20 16:26:24 1992
-
-    * 0.99pl1 released.
-
-    * scsi_ioctl.c: Bugfix - check dev->index, not dev->id against
-    NR_SCSI_DEVICES.
-
-    * sr_ioctl.c: Verify that device exists before allowing an ioctl.
-
-    * st.c: Patches from Kai - change timeout values, improve end of tape
-    handling.
-
-Sun Dec 13 18:15:23 1992
-
-    * 0.99 kernel released.  Baseline for this ChangeLog.
diff --git a/Documentation/scsi/Mylex.txt b/Documentation/scsi/Mylex.txt
deleted file mode 100644
index 3797f3e6c2b5..000000000000
--- a/Documentation/scsi/Mylex.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-Please see the file README.BusLogic for information about Linux support for
-Mylex (formerly BusLogic) MultiMaster and FlashPoint SCSI Host Adapters.
-
-The Mylex DAC960 PCI RAID Controllers are now supported.  Please consult
-http://sourceforge.net/projects/dandelion for further information on the DAC960 driver.
diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt
index 453d4b79c78d..25a4b4cf04a6 100644
--- a/Documentation/scsi/scsi-parameters.txt
+++ b/Documentation/scsi/scsi-parameters.txt
@@ -34,11 +34,6 @@ parameters may be changed at runtime by the command
 			See drivers/scsi/BusLogic.c, comment before function
 			BusLogic_ParseDriverOptions().
 
-	eata=		[HW,SCSI]
-
-	fdomain=	[HW,SCSI]
-			See header of drivers/scsi/fdomain.c.
-
 	gdth=		[HW,SCSI]
 			See header of drivers/scsi/gdth.c.
 
@@ -70,8 +65,6 @@ parameters may be changed at runtime by the command
 	ncr53c400a=	[HW,SCSI]
 			See Documentation/scsi/g_NCR5380.txt.
 
-	ncr53c406a=	[HW,SCSI]
-
 	ncr53c8xx=	[HW,SCSI]
 
 	osst=		[HW,SCSI] SCSI Tape Driver
@@ -110,12 +103,5 @@ parameters may be changed at runtime by the command
 	st=		[HW,SCSI] SCSI tape parameters (buffers, etc.)
 			See Documentation/scsi/st.txt.
 
-	sym53c416=	[HW,SCSI]
-			See header of drivers/scsi/sym53c416.c.
-
-	tmscsim=	[HW,SCSI]
-			See comment before function dc390_setup() in
-			drivers/scsi/tmscsim.c.
-
 	wd33c93=	[HW,SCSI]
 			See header of drivers/scsi/wd33c93.c.
diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt
index 2c31d9ee6776..177c031763c0 100644
--- a/Documentation/scsi/scsi_mid_low_api.txt
+++ b/Documentation/scsi/scsi_mid_low_api.txt
@@ -114,9 +114,7 @@ called "xxx" could be defined as
 "static int xxx_slave_alloc(struct scsi_device * sdev) { /* code */ }"
 
 ** the scsi_host_alloc() function is a replacement for the rather vaguely
-named scsi_register() function in most situations. The scsi_register()
-and scsi_unregister() functions remain to support legacy LLDs that use
-the passive initialization model.
+named scsi_register() function in most situations.
 
 
 Hotplug initialization model
@@ -228,79 +226,6 @@ slave_configure() callbacks). Such instances are "owned" by the mid-level.
 struct scsi_device instances are freed after slave_destroy().
 
 
-Passive initialization model
-============================
-These older LLDs include a file called "scsi_module.c" [yes the ".c" is a
-little surprising] in their source code. For that file to work an
-instance of struct scsi_host_template with the name "driver_template"
-needs to be defined. Here is a typical code sequence used in this model:
-    static struct scsi_host_template driver_template = {
-        ...
-    };
-    #include "scsi_module.c"
-
-The scsi_module.c file contains two functions:
-  - init_this_scsi_driver() which is executed when the LLD is
-    initialized (i.e. boot time or module load time)
-  - exit_this_scsi_driver() which is executed when the LLD is shut
-    down (i.e. module unload time)
-Note: since these functions are tagged with __init and __exit qualifiers
-an LLD should not call them explicitly (since the kernel does that).
-
-Here is an example of an initialization sequence when two hosts are
-detected (so detect() returns 2) and the SCSI bus scan on each host
-finds 1 SCSI device (and a second device does not respond).
-
-LLD                      mid level                 LLD
-===----------------------=========-----------------===------
-init_this_scsi_driver() ----+
-                            |
-                         detect()  -----------------+
-                            |                       |
-                            |                scsi_register()
-                            |                scsi_register()
-                            |
-                      slave_alloc()
-                      slave_configure()  -->  scsi_change_queue_depth()
-                      slave_alloc()   ***
-                      slave_destroy() ***
-                            |
-                      slave_alloc()
-                      slave_configure()
-                      slave_alloc()   ***
-                      slave_destroy() ***
-------------------------------------------------------------
-
-The mid level invokes scsi_change_queue_depth() with "cmd_per_lun" for that
-host as the queue length. These settings can be overridden by a
-slave_configure() supplied by the LLD.
-
-*** For scsi devices that the mid level tries to scan but do not
-    respond, a slave_alloc(), slave_destroy() pair is called.
-
-Here is an LLD shutdown sequence:
-
-LLD                      mid level                 LLD
-===----------------------=========-----------------===------
-exit_this_scsi_driver() ----+
-                            |
-                     slave_destroy()
-                        release()   -->   scsi_unregister()
-                            |
-                     slave_destroy()
-                        release()   -->   scsi_unregister()
-------------------------------------------------------------
-
-An LLD need not define slave_destroy() (i.e. it is optional). 
-
-The shortcoming of the "passive initialization model" is that host
-registration and de-registration are (typically) tied to LLD initialization
-and shutdown. Once the LLD is initialized then a new host that appears
-(e.g. via hotplugging) cannot easily be added without a redundant
-driver shutdown and re-initialization. It may be possible to write an LLD
-that uses both initialization models.
-
-
 Reference Counting
 ==================
 The Scsi_Host structure has had reference counting infrastructure added.
@@ -738,7 +663,6 @@ The interface functions are listed below in alphabetical order.
 
 Summary:
    bios_param - fetch head, sector, cylinder info for a disk
-   detect - detects HBAs this driver wants to control
    eh_timed_out - notify the host that a command timer expired
    eh_abort_handler - abort given command
    eh_bus_reset_handler - issue SCSI bus reset
@@ -748,7 +672,6 @@ Summary:
    ioctl - driver can respond to ioctls
    proc_info - supports /proc/scsi/{driver_name}/{host_no}
    queuecommand - queue scsi command, invoke 'done' on completion
-   release - release all resources associated with given host
    slave_alloc - prior to any commands being sent to a new device 
    slave_configure - driver fine tuning for given device after attach
    slave_destroy - given device is about to be shut down
@@ -785,28 +708,6 @@ Details:
 
 
 /**
- *      detect - detects HBAs this driver wants to control
- *      @shtp: host template for this driver.
- *
- *      Returns number of hosts this driver wants to control. 0 means no
- *      suitable hosts found.
- *
- *      Locks: none held
- *
- *      Calling context: process [invoked from init_this_scsi_driver()]
- *
- *      Notes: First function called from the SCSI mid level on this
- *      driver. Upper level drivers (e.g. sd) may not (yet) be present.
- *      For each host found, this method should call scsi_register() 
- *      [see hosts.c].
- *
- *      Defined in: LLD (required if "passive initialization mode" is used,
- *                       not invoked in "hotplug initialization mode")
- **/
-    int detect(struct scsi_host_template * shtp)
-
-
-/**
  *      eh_timed_out - The timer for the command has just fired
  *      @scp: identifies command timing out
  *
@@ -1074,27 +975,6 @@ Details:
 
 
 /**
- *      release - release all resources associated with given host
- *      @shp: host to be released.
- *
- *      Return value ignored (could soon be a function returning void).
- *
- *      Locks: none held
- *
- *      Calling context: process
- *
- *      Notes: Invoked from scsi_module.c's exit_this_scsi_driver().
- *      LLD's implementation of this function should call 
- *      scsi_unregister(shp) prior to returning.
- *      Only needed for old-style host templates.
- *
- *      Defined in: LLD (required in "passive initialization model",
- *                       should not be defined in hotplug model)
- **/
-    int release(struct Scsi_Host * shp)
-
-
-/**
  *      slave_alloc -   prior to any commands being sent to a new device 
  *                      (i.e. just prior to scan) this call is made
  *      @sdp: pointer to new device (about to be scanned)
diff --git a/Documentation/scsi/sd-parameters.txt b/Documentation/scsi/sd-parameters.txt
new file mode 100644
index 000000000000..8e5af00d88e7
--- /dev/null
+++ b/Documentation/scsi/sd-parameters.txt
@@ -0,0 +1,22 @@
+Linux SCSI Disk Driver (sd) Parameters
+======================================
+
+cache_type (RW)
+---------------
+Enable/disable drive write & read cache.
+
+ cache_type string          | WCE RCD | Write cache | Read cache
+----------------------------+---------+-------------+------------
+ write through              | 0   0   | off         | on
+ none                       | 0   1   | off         | off
+ write back                 | 1   0   | on          | on
+ write back, no read (daft) | 1   1   | on          | off
+
+To set cache type to "write back" and save this setting to the drive:
+
+  # echo "write back" > cache_type
+
+To modify the caching mode without making the change persistent, prepend
+"temporary " to the cache type string. E.g.:
+
+  # echo "temporary write back" > cache_type
diff --git a/Documentation/scsi/tmscsim.txt b/Documentation/scsi/tmscsim.txt
deleted file mode 100644
index 0e0322bf0020..000000000000
--- a/Documentation/scsi/tmscsim.txt
+++ /dev/null
@@ -1,443 +0,0 @@
-The tmscsim driver
-==================
-
-1. Purpose and history
-2. Installation
-3. Features
-4. Configuration via /proc/scsi/tmscsim/?
-5. Configuration via boot/module params
-6. Potential improvements
-7. Bug reports, debugging and updates
-8. Acknowledgements
-9. Copyright
-
-
-1. Purpose and history
-----------------------
-The tmscsim driver supports PCI SCSI Host Adapters based on the AM53C974
-chip. AM53C974 based SCSI adapters include: 
- Tekram DC390, DC390T
- Dawicontrol 2974
- QLogic Fast! PCI Basic
- some on-board adapters
-(This is most probably not a complete list)
-
-It has originally written by C.L. Huang from the Tekram corp. to support the
-Tekram DC390(T) adapter. This is where the name comes from: tm = Tekram
-scsi = SCSI driver, m = AMD (?) as opposed to w for the DC390W/U/F
-(NCR53c8X5, X=2/7) driver. Yes, there was also a driver for the latter,
-tmscsiw, which supported DC390W/U/F adapters. It's not maintained any more,
-as the ncr53c8xx is perfectly supporting these adapters since some time.
-
-The driver first appeared in April 1996, exclusively supported the DC390 
-and has been enhanced since then in various steps. In May 1998 support for 
-general AM53C974 based adapters and some possibilities to configure it were
-added. The non-DC390 support works by assuming some values for the data
-normally taken from the DC390 EEPROM. See below (chapter 5) for details.
-
-When using the DC390, the configuration is still be done using the DC390
-BIOS setup. The DC390 EEPROM is read and used by the driver, any boot or
-module parameters (chapter 5) are ignored! However, you can change settings
-dynamically, as described in chapter 4. 
-
-For a more detailed description of the driver's history, see the first lines
-of tmscsim.c.
-The numbering scheme isn't consistent. The first versions went from 1.00 to
-1.12, then 1.20a to 1.20t. Finally I decided to use the ncr53c8xx scheme. So
-the next revisions will be 2.0a to 2.0X (stable), 2.1a to 2.1X (experimental),
-2.2a to 2.2X (stable, again) etc. (X = anything between a and z.) If I send
-fixes to people for testing, I create intermediate versions with a digit 
-appended, e.g. 2.0c3.
-
-
-2. Installation
----------------
-If you got any recent kernel with this driver and document included in
-linux/drivers/scsi, you basically have to do nothing special to use this
-driver. Of course you have to choose to compile SCSI support and DC390(T)
-support into your kernel or as module when configuring your kernel for
-compiling.
-NEW: You may as well compile this module outside your kernel, using the
-supplied Makefile.
-
- If you got an old kernel (pre 2.1.127, pre 2.0.37p1) with an old version of
- this driver: Get dc390-21125-20b.diff.gz or dc390-2036p21-20b1.diff.gz from
- my web page and apply the patch. Apply further patches to upgrade to the 
- latest version of the driver.
-
- If you want to do it manually, you should copy the files (dc390.h,
- tmscsim.h, tmscsim.c, scsiiom.c and README.tmscsim) from this directory to
- linux/drivers/scsi. You have to recompile your kernel/module of course.
-
- You should apply the three patches included in dc390-120-kernel.diff
- (Applying them: cd /usr/src; patch -p0 <~/dc390-120-kernel.diff)
- The patches are against 2.1.125, so you might have to manually resolve
- rejections when applying to another kernel version.
-
- The patches will update the kernel startup code to allow boot parameters to
- be passed to the driver, update the Documentation and finally offer you the
- possibility to omit the non-DC390 parts of the driver.
- (By selecting "Omit support for non DC390" you basically disable the
- emulation of a DC390 EEPROM for non DC390 adapters. This saves a few bytes
- of memory.)
-
-If you got a very old kernel without the tmscsim driver (pre 2.0.31)
-I recommend upgrading your kernel. However, if you don't want to, please
-contact me to get the appropriate patches.
-
-
-Upgrading a SCSI driver is always a delicate thing to do. The 2.0 driver has
-proven stable on many systems, but it's still a good idea to take some
-precautions. In an ideal world you would have a full backup of your disks.
-The world isn't ideal and most people don't have full backups (me neither).
-So take at least the following measures:
-* make your kernel remount the FS read-only on detecting an error:
-  tune2fs -e remount-ro /dev/sd??
-* have copies of your SCSI disk's partition tables on some safe location:
-  dd if=/dev/sda of=/mnt/floppy/sda bs=512 count=1
-  or just print it with:
-  fdisk -l | lpr
-* make sure you are able to boot Linux (e.g. from floppy disk using InitRD)
-  if your SCSI disk gets corrupted. You can use 
-  ftp://student.physik.uni-dortmund.de/pub/linux/kernel/bootdisk.gz
-
-One more warning: I used to overclock my PCI bus to 41.67 MHz. My Tekram
-DC390F (Sym53c875) accepted this as well as my Millennium. But the Am53C974
-produced errors and started to corrupt my disks. So don't do that! A 37.50
-MHz PCI bus works for me, though, but I don't recommend using higher clocks
-than the 33.33 MHz being in the PCI spec.
-
-
-3.Features
-----------
-- SCSI
- * Tagged command queueing
- * Sync speed up to 10 MHz
- * Disconnection
- * Multiple LUNs
-
-- General / Linux interface
- * Support for up to 4 AM53C974 adapters.
- * DC390 EEPROM usage or boot/module params
- * Information via cat /proc/scsi/tmscsim/?
- * Dynamically configurable by writing to /proc/scsi/tmscsim/?
- * Dynamic allocation of resources
- * SMP support: Locking on io_request lock (Linux 2.1/2.2) or adapter 
-    specific locks (Linux 2.5?)
- * Uniform source code for Linux-2.x.y
- * Support for dyn. addition/removal of devices via add/remove-single-device
-   (Try: echo "scsi add-single-device C B T U" >/proc/scsi/scsi 
-    C = Controller, B = Bus, T = Target SCSI ID, U = Unit SCSI LUN.) 
-    Use with care!
- * Try to use the partition table for the determination of the mapping
-
-
-4. Configuration via /proc/scsi/tmscsim/?
------------------------------------------
-First of all look at the output of /proc/scsi/tmscsim/? by typing
- cat /proc/scsi/tmscsim/?
-The "?" should be replaced by the SCSI host number. (The shell might do this
-for you.)
-You will see some info regarding the adapter and, at the end, a listing of
-the attached devices and their settings.
-
-Here's an example:
-garloff@kurt:/home/garloff > cat /proc/scsi/tmscsim/0
-Tekram DC390/AM53C974 PCI SCSI Host Adapter, Driver Version 2.0e7 2000-11-28
-SCSI Host Nr 1, AM53C974 Adapter Nr 0
-IOPortBase 0xb000, IRQ 10
-MaxID 8, MaxLUN 8, AdapterID 6, SelTimeout 250 ms, DelayReset 1 s
-TagMaxNum 16, Status 0x00, ACBFlag 0x00, GlitchEater 24 ns
-Statistics: Cmnds 1470165, Cmnds not sent directly 0, Out of SRB conds 0
-            Lost arbitrations 587,  Sel. connected 0, Connected: No
-Nr of attached devices: 4, Nr of DCBs: 4
-Map of attached LUNs: 01 00 00 03 01 00 00 00
-Idx ID LUN Prty Sync DsCn SndS TagQ NegoPeriod SyncSpeed SyncOffs MaxCmd
-00  00  00  Yes  Yes  Yes  Yes  Yes   100 ns    10.0 M      15      16
-01  03  00  Yes  Yes  Yes  Yes  No    100 ns    10.0 M      15      01
-02  03  01  Yes  Yes  Yes  Yes  No    100 ns    10.0 M      15      01
-03  04  00  Yes  Yes  Yes  Yes  No    100 ns    10.0 M      15      01
-
-Note that the settings MaxID and MaxLUN are not zero- but one-based, which
-means that a setting MaxLUN=4, will result in the support of LUNs 0..3. This
-is somehow inconvenient, but the way the mid-level SCSI code expects it to be.
-
-ACB and DCB are acronyms for Adapter Control Block and Device Control Block.
-These are data structures of the driver containing information about the
-adapter and the connected SCSI devices respectively.
-
-Idx is the device index (just a consecutive number for the driver), ID and
-LUN are the SCSI ID and LUN, Prty means Parity checking, Sync synchronous
-negotiation, DsCn Disconnection, SndS Send Start command on startup (not
-used by the driver) and TagQ Tagged Command Queueing. NegoPeriod and
-SyncSpeed are somehow redundant, because they are reciprocal values 
-(1 / 112 ns = 8.9 MHz). At least in theory. The driver is able to adjust the
-NegoPeriod more accurate (4ns) than the SyncSpeed (1 / 25ns). I don't know
-if certain devices will have problems with this discrepancy. Max. speed is
-10 MHz corresp. to a min. NegoPeriod of 100 ns. 
-(The driver allows slightly higher speeds if the devices (Ultra SCSI) accept
-it, but that's out of adapter spec, on your own risk and unlikely to improve
-performance. You're likely to crash your disks.) 
-SyncOffs is the offset used for synchronous negotiations; max. is 15. 
-The last values are only shown, if Sync is enabled. (NegoPeriod is still
-displayed in brackets to show the values which will be used after enabling
-Sync.)
-MaxCmd ist the number of commands (=tags) which can be processed at the same
-time by the device.
-
-If you want to change a setting, you can do that by writing to
-/proc/scsi/tmscsim/?. Basically you have to imitate the output of driver.
-(Don't use the brackets for NegoPeriod on Sync disabled devices.)
-You don't have to care about capitalisation. The driver will accept space,
-tab, comma, = and : as separators.
-
-There are three kinds of changes: 
-
-(1) Change driver settings: 
-    You type the names of the parameters and the params following it.
-    Example:
-     echo "MaxLUN=8 seltimeout 200" >/proc/scsi/tmscsim/0
-
-    Note that you can only change MaxID, MaxLUN, AdapterID, SelTimeOut,
-    TagMaxNum, ACBFlag, GlitchEater and DelayReset. Don't change ACBFlag
-    unless you want to see what happens, if the driver hangs.
-
-(2) Change device settings: You write a config line to the driver. The Nr
-    must match the ID and LUN given. If you give "-" as parameter, it is
-    ignored and the corresponding setting won't be changed. 
-    You can use "y" or "n" instead of "Yes" and "No" if you want to.
-    You don't need to specify a full line. The driver automatically performs
-    an INQUIRY on the device if necessary to check if it is capable to operate
-    with the given settings (Sync, TagQ).
-    Examples:
-     echo "0 0 0 y y y - y - 10 " >/proc/scsi/tmscsim/0
-     echo "3 5 0 y n y " >/proc/scsi/tmscsim/0
-
-    To give a short explanation of the first example: 
-    The first three numbers, "0 0 0" (Device index 0, SCSI ID 0, SCSI LUN 0),
-    select the device to which the following parameters apply. Note that it
-    would be sufficient to use the index or both SCSI ID and LUN, but I chose
-    to require all three to have a syntax similar to the output.
-    The following "y y y - y" enables Parity checking, enables Synchronous
-    transfers, Disconnection, leaves Send Start (not used) untouched and
-    enables Tagged Command Queueing for the selected device. The "-" skips
-    the Negotiation Period setting but the "10" sets the max sync. speed to
-    10 MHz. It's useless to specify both NegoPeriod and SyncSpeed as
-    discussed above. The values used in this example will result in maximum
-    performance.
-
-(3) Special commands: You can force a SCSI bus reset, an INQUIRY command, the
-    removal or the addition of a device's DCB and a SCSI register dump.
-    This is only used for debugging when you meet problems. The parameter of
-    the INQUIRY and REMOVE commands is the device index as shown by the
-    output of /proc/scsi/tmscsim/? in the device listing in the first column
-    (Idx). ADD takes the SCSI ID and LUN.
-    Examples:
-     echo "reset" >/proc/scsi/tmscsim/0
-     echo "inquiry 1" >/proc/scsi/tmscsim/0
-     echo "remove 2" >/proc/scsi/tmscsim/1
-     echo "add 2 3" >/proc/scsi/tmscsim/?
-     echo "dump" >/proc/scsi/tmscsim/0
-
-    Note that you will meet problems when you REMOVE a device's DCB with the
-    remove command if it contains partitions which are mounted. Only use it
-    after unmounting its partitions, telling the SCSI mid-level code to
-    remove it (scsi remove-single-device) and you really need a few bytes of
-    memory.
-    The ADD command allows you to configure a device before you tell the
-    mid-level code to try detection.
-
-
-I'd suggest reviewing the output of /proc/scsi/tmscsim/? after changing
-settings to see if everything changed as requested.
-
-
-5. Configuration via boot/module parameters
--------------------------------------------
-With the DC390, the driver reads its EEPROM settings and tries to use them.
-But you may want to override the settings prior to being able to change the
-driver configuration via /proc/scsi/tmscsim/?.
-If you do have another AM53C974 based adapter, that's even the only
-possibility to adjust settings before you are able to write to the
-/proc/scsi/tmscsim/? pseudo-file, e.g. if you want to use another 
-adapter ID than 7.  
-(BTW, the log message "DC390: No EEPROM found!" is normal without a DC390.)
-For this purpose, you can pass options to the driver before it is initialised
-by using kernel or module parameters. See lilo(8) or modprobe(1) manual
-pages on how to pass params to the kernel or a module.
-[NOTE: Formerly, it was not possible to override the EEPROM supplied
- settings of the DC390 with cmd line parameters. This has changed since
- 2.0e7]
-
-The syntax of the params is much shorter than the syntax of the /proc/...
-interface. This makes it a little bit more difficult to use. However, long
-parameter lines have the risk to be misinterpreted and the length of kernel
-parameters is limited.
-
-As the support for non-DC390 adapters works by simulating the values of the
-DC390 EEPROM, the settings are given in a DC390 BIOS' way.
-
-Here's the syntax:
-tmscsim=AdaptID,SpdIdx,DevMode,AdaptMode,TaggedCmnds,DelayReset
-
-Each of the parameters is a number, containing the described information:
-
-* AdaptID: The SCSI ID of the host adapter. Must be in the range 0..7
-  Default is 7.
-
-* SpdIdx: The index of the maximum speed as in the DC390 BIOS. The values
-  0..7 mean 10, 8.0, 6.7, 5.7, 5.0, 4.0, 3.1 and 2 MHz resp. Default is
-  0 (10.0 MHz).
-
-* DevMode is a bit mapped value describing the per-device features. It
-  applies to all devices. (Sync, Disc and TagQ will only apply, if the
-  device supports it.) The meaning of the bits (* = default):
-
-   Bit Val(hex) Val(dec)  Meaning
-   *0	 0x01	    1	  Parity check
-   *1	 0x02	    2	  Synchronous Negotiation
-   *2	 0x04	    4	  Disconnection
-   *3	 0x08	    8	  Send Start command on startup. (Not used)
-   *4	 0x10	   16	  Tagged Command Queueing
-
-  As usual, the desired value is obtained by adding the wanted values. If
-  you want to enable all values, e.g., you would use 31(0x1f). Default is 31.
-
-* AdaptMode is a bit mapped value describing the enabled adapter features.
-
-   Bit Val(hex) Val(dec)  Meaning
-   *0	 0x01	    1	  Support more than two drives. (Not used)
-   *1	 0x02	    2	  Use DOS compatible mapping for HDs greater than 1GB.
-   *2	 0x04	    4	  Reset SCSI Bus on startup.
-   *3	 0x08	    8	  Active Negation: Improves SCSI Bus noise immunity.
-    4	 0x10	   16	  Immediate return on BIOS seek command. (Not used)
- (*)5	 0x20	   32	  Check for LUNs >= 1.
-  
-* TaggedCmnds is a number indicating the maximum number of Tagged Commands.
-  It is the binary logarithm - 1 of the actual number. Max is 4 (32).
-   Value  Number of Tagged Commands
-     0		 2
-     1		 4
-     2		 8
-    *3		16
-     4		32
-
-* DelayReset is the time in seconds (minus 0.5s), the adapter waits, after a
-  bus reset. Default is 1 (corresp. to 1.5s).
-
-Example:
- modprobe tmscsim tmscsim=6,2,31
-would set the adapter ID to 6, max. speed to 6.7 MHz, enable all device
-features and leave the adapter features, the number of Tagged Commands
-and the Delay after a reset to the defaults.
-
-As you can see, you don't need to specify all of the six params.
-If you want values to be ignored (i.e. the EEprom settings or the defaults
-will be used), you may pass -2 (not 0!) at the corresponding position.
-
-The defaults (7,0,31,15,3,1) are aggressive to allow good performance. You
-can use tmscsim=7,0,31,63,4,0 for maximum performance, if your SCSI chain
-allows it. If you meet problems, you can use tmscsim=-1 which is a shortcut
-for tmscsim=7,4,9,15,2,10.
-
-
-6. Potential improvements
--------------------------
-Most of the intended work on the driver has been done. Here are a few ideas
-to further improve its usability:
-
-* Cleanly separate per-Target and per-LUN properties (DCB)
-* More intelligent abort() routine
-* Use new_eh code (Linux-2.1+)
-* Have the mid-level (ML) code (and not the driver) handle more of the
-  various conditions.
-* Command queueing in the driver: Eliminate Query list and use ML instead.
-* More user friendly boot/module param syntax
-
-Further investigation on these problems:
-
-* Driver hangs with sync readcdda (xcdroast) (most probably VIA PCI error)
-
-Known problems: 
-Please see http://www.garloff.de/kurt/linux/dc390/problems.html
-
-* Changing the parameters of multi-lun by the tmscsim/? interface will
-  cause problems, cause these settings are mostly per Target and not per LUN
-  and should be updated accordingly. To be fixed for 2.0d24.
-* CDRs (eg Yam CRW4416) not recognized, because some buggy devices don't 
-  recover from a SCSI reset in time. Use a higher delay or don't issue
-  a SCSI bus reset on driver initialization. See problems page.
-  For the CRW4416S, this seems to be solved with firmware 1.0g (reported by 
-  Jean-Yves Barbier).
-* TEAC CD-532S not being recognized. (Works with 1.11).
-* Scanners (eg. Astra UMAX 1220S) don't work: Disable Sync Negotiation.
-  If this does not help, try echo "INQUIRY t" >/proc/scsi/tmscsim/? (t
-  replaced by the dev index of your scanner). You may try to reset your SCSI
-  bus afterwards (echo "RESET" >/proc/scsi/tmscsim/?).
-  The problem seems to be solved as of 2.0d18, thanks to Andreas Rick.
-* If there is a valid partition table, the driver will use it for determining
-  the mapping. If there's none, a reasonable mapping (Symbios-like) will be
-  assumed. Other operating systems may not like this mapping, though
-  it's consistent with the BIOS' behaviour. Old DC390 drivers ignored the
-  partition table and used a H/S = 64/32 or 255/63 translation. So if you
-  want to be compatible to those, use this old mapping when creating
-  partition tables. Even worse, on bootup the DC390 might complain if other
-  mappings are found, so auto rebooting may fail.
-* In some situations, the driver will get stuck in an abort loop. This is a
-  bad interaction between the Mid-Layer of Linux' SCSI code and the driver.
-  Try to disable DsCn, if you meet this problem. Please contact me for
-  further debugging.
-
-
-7. Bug reports, debugging and updates
--------------------------------------
-Whenever you have problems with the driver, you are invited to ask the
-author for help. However, I'd suggest reading the docs and trying to solve
-the problem yourself, first. 
-If you find something, which you believe to be a bug, please report it to me. 
-Please append the output of /proc/scsi/scsi, /proc/scsi/tmscsim/? and
-maybe the DC390 log messages to the report. 
-
-Bug reports should be send to me (Kurt Garloff <dc390@garloff.de>) as well
-as to the linux-scsi list (<linux-scsi@vger.kernel.org>), as sometimes bugs
-are caused by the SCSI mid-level code.
-
-I will ask you for some more details and probably I will also ask you to
-enable some of the DEBUG options in the driver (tmscsim.c:DC390_DEBUGXXX
-defines). The driver will produce some data for the syslog facility then.
-Beware: If your syslog gets written to a SCSI disk connected to your
-AM53C974, the logging might produce log output again, and you might end
-having your box spending most of its time doing the logging.
-
-The latest version of the driver can be found at:
- http://www.garloff.de/kurt/linux/dc390/
- ftp://ftp.suse.com/pub/people/garloff/linux/dc390/
-
-
-8. Acknowledgements
--------------------
-Thanks to Linus Torvalds, Alan Cox, the FSF people, the XFree86 team and 
-all the others for the wonderful OS and software.
-Thanks to C.L. Huang and Philip Giang (Tekram) for the initial driver
-release and support.
-Thanks to Doug Ledford, Gérard Roudier for support with SCSI coding.
-Thanks to a lot of people (espec. Chiaki Ishikawa, Andreas Haumer, Hubert 
-Tonneau) for intensively testing the driver (and even risking data loss
-doing this during early revisions).
-Recently, SuSE GmbH, Nuernberg, FRG, has been paying me for the driver
-development and maintenance. Special thanks!
-
-
-9. Copyright
-------------
- This driver is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by   
- the Free Software Foundation; version 2 of the License.
- If you want to use any later version of the GNU GPL, you will probably
- be allowed to, but you have to ask me and Tekram <erich@tekram.com.tw>
- before.
-
--------------------------------------------------------------------------
-Written by Kurt Garloff <kurt@garloff.de> 1998/06/11
-Last updated 2000/11/28, driver revision 2.0e7
-$Id: README.tmscsim,v 2.25.2.7 2000/12/20 01:07:12 garloff Exp $