docs: hwmon: Add an index file and rename docs to *.rst

Now that all files were converted to ReST format, rename them
and add an index.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 0 insertions, 127 deletions

diff --git a/Documentation/hwmon/max16065 b/Documentation/hwmon/max16065
deleted file mode 100644
index fa5c852a178c..000000000000
--- a/Documentation/hwmon/max16065
+++ /dev/null
@@ -1,127 +0,0 @@
-Kernel driver max16065
-======================
-
-
-Supported chips:
-
-  * Maxim MAX16065, MAX16066
-
-    Prefixes: 'max16065', 'max16066'
-
-    Addresses scanned: -
-
-    Datasheet:
-
-	http://datasheets.maxim-ic.com/en/ds/MAX16065-MAX16066.pdf
-
- *  Maxim MAX16067
-
-    Prefix: 'max16067'
-
-    Addresses scanned: -
-
-    Datasheet:
-
-	http://datasheets.maxim-ic.com/en/ds/MAX16067.pdf
-
- *  Maxim MAX16068
-
-    Prefix: 'max16068'
-
-    Addresses scanned: -
-
-    Datasheet:
-
-	http://datasheets.maxim-ic.com/en/ds/MAX16068.pdf
-
- *  Maxim MAX16070/MAX16071
-
-    Prefixes: 'max16070', 'max16071'
-
-    Addresses scanned: -
-
-    Datasheet:
-
-	http://datasheets.maxim-ic.com/en/ds/MAX16070-MAX16071.pdf
-
-Author: Guenter Roeck <linux@roeck-us.net>
-
-
-Description
------------
-
-[From datasheets] The MAX16065/MAX16066 flash-configurable system managers
-monitor and sequence multiple system voltages. The MAX16065/MAX16066 can also
-accurately monitor (+/-2.5%) one current channel using a dedicated high-side
-current-sense amplifier. The MAX16065 manages up to twelve system voltages
-simultaneously, and the MAX16066 manages up to eight supply voltages.
-
-The MAX16067 flash-configurable system manager monitors and sequences multiple
-system voltages. The MAX16067 manages up to six system voltages simultaneously.
-
-The MAX16068 flash-configurable system manager monitors and manages up to six
-system voltages simultaneously.
-
-The MAX16070/MAX16071 flash-configurable system monitors supervise multiple
-system voltages. The MAX16070/MAX16071 can also accurately monitor (+/-2.5%)
-one current channel using a dedicated high-side current-sense amplifier. The
-MAX16070 monitors up to twelve system voltages simultaneously, and the MAX16071
-monitors up to eight supply voltages.
-
-Each monitored channel has its own low and high critical limits. MAX16065,
-MAX16066, MAX16070, and MAX16071 support an additional limit which is
-configurable as either low or high secondary limit. MAX16065, MAX16066,
-MAX16070, and MAX16071 also support supply current monitoring.
-
-
-Usage Notes
------------
-
-This driver does not probe for devices, since there is no register which
-can be safely used to identify the chip. You will have to instantiate
-the devices explicitly. Please see Documentation/i2c/instantiating-devices for
-details.
-
-WARNING: Do not access chip registers using the i2cdump command, and do not use
-any of the i2ctools commands on a command register (0xa5 to 0xac). The chips
-supported by this driver interpret any access to a command register (including
-read commands) as request to execute the command in question. This may result in
-power loss, board resets, and/or Flash corruption. Worst case, your board may
-turn into a brick.
-
-
-Sysfs entries
--------------
-
-======================= ========================================================
-in[0-11]_input		Input voltage measurements.
-
-in12_input		Voltage on CSP (Current Sense Positive) pin.
-			Only if the chip supports current sensing and if
-			current sensing is enabled.
-
-in[0-11]_min		Low warning limit.
-			Supported on MAX16065, MAX16066, MAX16070, and MAX16071
-			only.
-
-in[0-11]_max		High warning limit.
-			Supported on MAX16065, MAX16066, MAX16070, and MAX16071
-			only.
-
-			Either low or high warning limits are supported
-			(depending on chip configuration), but not both.
-
-in[0-11]_lcrit		Low critical limit.
-
-in[0-11]_crit		High critical limit.
-
-in[0-11]_alarm		Input voltage alarm.
-
-curr1_input		Current sense input; only if the chip supports current
-			sensing and if current sensing is enabled.
-			Displayed current assumes 0.001 Ohm current sense
-			resistor.
-
-curr1_alarm		Overcurrent alarm; only if the chip supports current
-			sensing and if current sensing is enabled.
-======================= ========================================================