Merge tag 'i2c-host-6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

i2c-host updates for v6.13, part 1

Major Improvements and Refactoring:

 - All controllers using the 'remove_new' callback have been
   reverted to use the 'remove' callback.

 - Intel SCH controller underwent significant refactoring,
   this brings love and a modern look to the driver.

 - PIIX4 driver refactored to enable usage by other drivers
   (e.g., AMD ASF).

 - iMX/MXC improved message handling to reduce protocol overhead:
     Refactored DMA/non-DMA read/write and bus polling mechanisms
     to achieve this.

 - ACPI documentation for PIIX4.

New Features:

 - i2c-cadence added support for atomic transfers.
 - Qualcomm CII added support for a 32MHz serial engine clock.

Deprecated Features:

 - Dropped outdated support for AMD756 S4882 and NFORCE2 S4985. If
   somebody misses this, Jean will rewrite support using the proper
   i2c mux framework.

New Hardware Support:

 - Added support for:
   - Intel Panther Lake (new ID)
   - AMD ASF (new driver)
   - S32G2/S32G3 SoCs (new ID)
   - Realtek RTL I2C Controller (new driver)
   - HJMC01 DesignWare ACPI HID (new ID)
   - PIC64GX to Microchip Core (new ID)
   - Qualcomm SDM670 to Qualcomm CCI (new ID)

19 files changed, 261 insertions, 71 deletions

diff --git a/Documentation/devicetree/bindings/display/elgin,jg10309-01.yaml b/Documentation/devicetree/bindings/display/elgin,jg10309-01.yaml
new file mode 100644
index 000000000000..faca0cb3f154
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/elgin,jg10309-01.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/elgin,jg10309-01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elgin JG10309-01 SPI-controlled display
+
+maintainers:
+  - Fabio Estevam <festevam@gmail.com>
+
+description: |
+  The Elgin JG10309-01 SPI-controlled display is used on the RV1108-Elgin-r1
+  board and is a custom display.
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: elgin,jg10309-01
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 24000000
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+  - spi-cpol
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display@0 {
+            compatible = "elgin,jg10309-01";
+            reg = <0>;
+            spi-max-frequency = <24000000>;
+            spi-cpha;
+            spi-cpol;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
index 3a82aec9021c..497c0eb4ed0b 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
@@ -63,6 +63,16 @@ properties:
       - const: sleep
 
   power-domains:
+    description: |
+      The MediaTek DPI module is typically associated with one of the
+      following multimedia power domains:
+        POWER_DOMAIN_DISPLAY
+        POWER_DOMAIN_VDOSYS
+        POWER_DOMAIN_MM
+      The specific power domain used varies depending on the SoC design.
+
+      It is recommended to explicitly add the appropriate power domain
+      property to the DPI node in the device tree.
     maxItems: 1
 
   port:
@@ -79,20 +89,6 @@ required:
   - clock-names
   - port
 
-allOf:
-  - if:
-      not:
-        properties:
-          compatible:
-            contains:
-              enum:
-                - mediatek,mt6795-dpi
-                - mediatek,mt8173-dpi
-                - mediatek,mt8186-dpi
-    then:
-      properties:
-        power-domains: false
-
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
index e4affc854f3d..4b6ff546757e 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
@@ -38,6 +38,7 @@ properties:
     description: A phandle and PM domain specifier as defined by bindings of
       the power controller specified by phandle. See
       Documentation/devicetree/bindings/power/power-domain.yaml for details.
+    maxItems: 1
 
   mediatek,gce-client-reg:
     description:
@@ -57,6 +58,9 @@ properties:
   clocks:
     items:
       - description: SPLIT Clock
+      - description: Used for interfacing with the HDMI RX signal source.
+      - description: Paired with receiving HDMI RX metadata.
+    minItems: 1
 
 required:
   - compatible
@@ -72,9 +76,24 @@ allOf:
             const: mediatek,mt8195-mdp3-split
 
     then:
+      properties:
+        clocks:
+          minItems: 3
+
       required:
         - mediatek,gce-client-reg
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8173-disp-split
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
index 54d7d11bfed4..ff7a6f12cd00 100644
--- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
+++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
@@ -124,7 +124,7 @@ properties:
       atomic mode of operation, even if requested.
     default: 0
 
-  max-rx-timeout-ms:
+  arm,max-rx-timeout-ms:
     description:
       An optional time value, expressed in milliseconds, representing the
       transport maximum timeout value for the receive channel. The value should
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
index 85ee1282d6d2..0682a5a10d41 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
@@ -18,6 +18,7 @@ properties:
       - const: fsl,imx1-i2c
       - const: fsl,imx21-i2c
       - const: fsl,vf610-i2c
+      - const: nxp,s32g2-i2c
       - items:
           - enum:
               - fsl,ls1012a-i2c
@@ -54,6 +55,9 @@ properties:
               - fsl,imx8mn-i2c
               - fsl,imx8mp-i2c
           - const: fsl,imx21-i2c
+      - items:
+          - const: nxp,s32g3-i2c
+          - const: nxp,s32g2-i2c
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml b/Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml
index afa3db726229..6ff58b64d496 100644
--- a/Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml
@@ -16,7 +16,9 @@ properties:
   compatible:
     oneOf:
       - items:
-          - const: microchip,mpfs-i2c # Microchip PolarFire SoC compatible SoCs
+          - enum:
+              - microchip,pic64gx-i2c
+              - microchip,mpfs-i2c # Microchip PolarFire SoC compatible SoCs
           - const: microchip,corei2c-rtl-v7 # Microchip Fabric based i2c IP core
       - const: microchip,corei2c-rtl-v7 # Microchip Fabric based i2c IP core
 
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
index 7dab3852c7f8..ef26ba6eda28 100644
--- a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
@@ -27,6 +27,7 @@ properties:
           - enum:
               - qcom,sc7280-cci
               - qcom,sc8280xp-cci
+              - qcom,sdm670-cci
               - qcom,sdm845-cci
               - qcom,sm6350-cci
               - qcom,sm8250-cci
@@ -144,6 +145,24 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,sdm670-cci
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: camnoc_axi
+            - const: soc_ahb
+            - const: cpas_ahb
+            - const: cci
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,sdm845-cci
               - qcom,sm6350-cci
     then:
diff --git a/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml b/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml
new file mode 100644
index 000000000000..eddfd329c67b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/realtek,rtl9301-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek RTL I2C Controller
+
+maintainers:
+  - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+description:
+  The RTL9300 SoC has two I2C controllers. Each of these has an SCL line (which
+  if not-used for SCL can be a GPIO). There are 8 common SDA lines that can be
+  assigned to either I2C controller.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - realtek,rtl9302b-i2c
+              - realtek,rtl9302c-i2c
+              - realtek,rtl9303-i2c
+          - const: realtek,rtl9301-i2c
+      - const: realtek,rtl9301-i2c
+
+  reg:
+    description: Register offset and size this I2C controller.
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  '^i2c@[0-7]$':
+    $ref: /schemas/i2c/i2c-controller.yaml
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: The SDA pin associated with the I2C bus.
+        maxItems: 1
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c@36c {
+      compatible = "realtek,rtl9301-i2c";
+      reg = <0x36c 0x14>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      i2c@2 {
+        reg = <2>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
index bd19abb867d9..0065d6508824 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
@@ -67,6 +67,10 @@ properties:
       A 2.5V to 3.3V supply for the external reference voltage. When omitted,
       the internal 2.5V reference is used.
 
+  refin-supply:
+    description:
+      A 2.5V to 3.3V supply for external reference voltage, for ad7380-4 only.
+
   aina-supply:
     description:
       The common mode voltage supply for the AINA- pin on pseudo-differential
@@ -135,6 +139,23 @@ allOf:
         ainc-supply: false
         aind-supply: false
 
+  # ad7380-4 uses refin-supply as external reference.
+  # All other chips from ad738x family use refio as optional external reference.
+  # When refio-supply is omitted, internal reference is used.
+  - if:
+      properties:
+        compatible:
+          enum:
+            - adi,ad7380-4
+    then:
+      properties:
+        refio-supply: false
+      required:
+        - refin-supply
+    else:
+      properties:
+        refin-supply: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
index b4400c52bec3..713f535bb33a 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/dac/adi,ad5686.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices AD5360 and similar DACs
+title: Analog Devices AD5360 and similar SPI DACs
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
@@ -12,41 +12,22 @@ maintainers:
 
 properties:
   compatible:
-    oneOf:
-      - description: SPI devices
-        enum:
-          - adi,ad5310r
-          - adi,ad5672r
-          - adi,ad5674r
-          - adi,ad5676
-          - adi,ad5676r
-          - adi,ad5679r
-          - adi,ad5681r
-          - adi,ad5682r
-          - adi,ad5683
-          - adi,ad5683r
-          - adi,ad5684
-          - adi,ad5684r
-          - adi,ad5685r
-          - adi,ad5686
-          - adi,ad5686r
-      - description: I2C devices
-        enum:
-          - adi,ad5311r
-          - adi,ad5337r
-          - adi,ad5338r
-          - adi,ad5671r
-          - adi,ad5675r
-          - adi,ad5691r
-          - adi,ad5692r
-          - adi,ad5693
-          - adi,ad5693r
-          - adi,ad5694
-          - adi,ad5694r
-          - adi,ad5695r
-          - adi,ad5696
-          - adi,ad5696r
-
+    enum:
+      - adi,ad5310r
+      - adi,ad5672r
+      - adi,ad5674r
+      - adi,ad5676
+      - adi,ad5676r
+      - adi,ad5679r
+      - adi,ad5681r
+      - adi,ad5682r
+      - adi,ad5683
+      - adi,ad5683r
+      - adi,ad5684
+      - adi,ad5684r
+      - adi,ad5685r
+      - adi,ad5686
+      - adi,ad5686r
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5696.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5696.yaml
index 56b0cda0f30a..b5a88b03dc2f 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5696.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5696.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/dac/adi,ad5696.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices AD5696 and similar multi-channel DACs
+title: Analog Devices AD5696 and similar I2C multi-channel DACs
 
 maintainers:
   - Michael Auchter <michael.auchter@ni.com>
@@ -16,6 +16,7 @@ properties:
   compatible:
     enum:
       - adi,ad5311r
+      - adi,ad5337r
       - adi,ad5338r
       - adi,ad5671r
       - adi,ad5675r
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml
index 199b34fdbefc..7ff4efc4758a 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml
@@ -82,9 +82,6 @@ allOf:
             enum:
               - fsl,ls1043a-extirq
               - fsl,ls1046a-extirq
-              - fsl,ls1088a-extirq
-              - fsl,ls2080a-extirq
-              - fsl,lx2160a-extirq
     then:
       properties:
         interrupt-map:
@@ -95,6 +92,29 @@ allOf:
             - const: 0xf
             - const: 0
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,ls1088a-extirq
+              - fsl,ls2080a-extirq
+              - fsl,lx2160a-extirq
+# The driver(drivers/irqchip/irq-ls-extirq.c) have not use standard DT
+# function to parser interrupt-map. So it doesn't consider '#address-size'
+# in parent interrupt controller, such as GIC.
+#
+# When dt-binding verify interrupt-map, item data matrix is spitted at
+# incorrect position. Remove interrupt-map restriction because it always
+# wrong.
+
+    then:
+      properties:
+        interrupt-map-mask:
+          items:
+            - const: 0xf
+            - const: 0
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml
index 01b00d89a992..df45ff56d444 100644
--- a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml
+++ b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml
@@ -113,7 +113,7 @@ properties:
 
   msi-parent:
     deprecated: true
-    $ref: /schemas/types.yaml#/definitions/phandle
+    maxItems: 1
     description:
       Describes the MSI controller node handling message
       interrupts for the MC. When there is no translation
diff --git a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml
index 23dfe0838dca..63bee5b542f5 100644
--- a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml
@@ -26,6 +26,7 @@ properties:
       - brcm,asp-v2.1-mdio
       - brcm,asp-v2.2-mdio
       - brcm,unimac-mdio
+      - brcm,bcm6846-mdio
 
   reg:
     minItems: 1
diff --git a/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml b/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml
index e95c21628281..fb02e579463c 100644
--- a/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml
+++ b/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml
@@ -61,7 +61,7 @@ properties:
       - gmii
       - rgmii
       - sgmii
-      - 1000BaseX
+      - 1000base-x
 
   xlnx,phy-type:
     description:
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
index dcf4fa55fbba..380a9222a51d 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
@@ -154,8 +154,6 @@ allOf:
               - qcom,sm8550-qmp-gen4x2-pcie-phy
               - qcom,sm8650-qmp-gen3x2-pcie-phy
               - qcom,sm8650-qmp-gen4x2-pcie-phy
-              - qcom,x1e80100-qmp-gen3x2-pcie-phy
-              - qcom,x1e80100-qmp-gen4x2-pcie-phy
     then:
       properties:
         clocks:
@@ -171,6 +169,8 @@ allOf:
               - qcom,sc8280xp-qmp-gen3x1-pcie-phy
               - qcom,sc8280xp-qmp-gen3x2-pcie-phy
               - qcom,sc8280xp-qmp-gen3x4-pcie-phy
+              - qcom,x1e80100-qmp-gen3x2-pcie-phy
+              - qcom,x1e80100-qmp-gen4x2-pcie-phy
               - qcom,x1e80100-qmp-gen4x4-pcie-phy
     then:
       properties:
@@ -201,6 +201,7 @@ allOf:
               - qcom,sm8550-qmp-gen4x2-pcie-phy
               - qcom,sm8650-qmp-gen4x2-pcie-phy
               - qcom,x1e80100-qmp-gen4x2-pcie-phy
+              - qcom,x1e80100-qmp-gen4x4-pcie-phy
     then:
       properties:
         resets:
diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml
index ab3206ffa4af..beef193aaaeb 100644
--- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml
+++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml
@@ -102,21 +102,21 @@ properties:
     default: 2
 
   interrupts:
-    oneOf:
-      - minItems: 1
-        items:
-          - description: TX interrupt
-          - description: RX interrupt
-      - items:
-          - description: common/combined interrupt
+    minItems: 1
+    maxItems: 2
 
   interrupt-names:
     oneOf:
-      - minItems: 1
+      - description: TX interrupt
+        const: tx
+      - description: RX interrupt
+        const: rx
+      - description: TX and RX interrupts
         items:
           - const: tx
           - const: rx
-      - const: common
+      - description: Common/combined interrupt
+        const: common
 
   fck_parent:
     $ref: /schemas/types.yaml#/definitions/string
diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3308-codec.yaml b/Documentation/devicetree/bindings/sound/rockchip,rk3308-codec.yaml
index ecf3d7d968c8..2cf229a076f0 100644
--- a/Documentation/devicetree/bindings/sound/rockchip,rk3308-codec.yaml
+++ b/Documentation/devicetree/bindings/sound/rockchip,rk3308-codec.yaml
@@ -48,6 +48,10 @@ properties:
       - const: mclk_rx
       - const: hclk
 
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
   resets:
     maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 0108d7507215..9bf0fb17a05e 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -101,8 +101,6 @@ properties:
           - domintech,dmard09
             # DMARD10: 3-axis Accelerometer
           - domintech,dmard10
-            # Elgin SPI-controlled LCD
-          - elgin,jg10309-01
             # MMA7660FC: 3-Axis Orientation/Motion Detection Sensor
           - fsl,mma7660
             # MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer