Merge tag 'mtd/for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxHEADmaster

Pull MTD updates from Miquel Raynal:
 "MTD changes:

   - mtdconcat finally makes it in, after several years of being merged
     and reverted

   - Baikal SoC support is being removed, so MTD bits are being removed
     as well

   - misc cleanups

  NAND changes:

   - SunXi driver support for new versions of the Allwinner NAND
     controller.

   - DT-binding improvements and cleanups.

   - A few fixes (Realtek ECC and Winbond SPI NAND), aside with the
     usual load of misc changes.

  SPI NOR fixes:

   - Enable die erase on MT35XU02GCBA. We knew this flash needed this
     fixup since 7f77c561e227 ("mtd: spi-nor: micron-st: add TODO for
     fixing mt35xu02gcba") but did not add it due to lack of hardware to
     test on.

   - Fix locking on some Winbond w25q series flashes.

   - Fix Auto Address Increment (AAI) writes on SST that flashes that
     start on odd address. The write enable latch needs to be set again
     after the single byte program"

* tag 'mtd/for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (44 commits)
  mtd: spinand: winbond: Declare the QE bit on W25NxxJW
  mtd: spi-nor: micron-st: Enable die erase support for MT35XU02GCBA
  mtd: spi-nor: winbond: Fix locking support for w25q256jw
  mtd: spi-nor: sst: Fix write enable before AAI sequence
  mtd: spi-nor: winbond: Fix locking support for w25q64jvm
  mtd: spi-nor: winbond: Fix locking support for w25q256jwm
  dt-bindings: mtd: mxc-nand: add missing compatible string and ref to nand-controller-legacy.yaml
  dt-bindings: mtd: gpmi-nand: ref to nand-controller-legacy.yaml
  dt-bindings: mtd: refactor NAND bindings and add nand-controller-legacy.yaml
  mtd: spinand: winbond: Clarify when to enable the HS bit
  mtd: rawnand: sunxi: introduce maximize variable user data length
  mtd: rawnand: sunxi: fix typos in comments
  mtd: rawnand: sunxi: change error prone variable name
  mtd: rawnand: sunxi: remove dead code
  mtd: rawnand: sunxi: make the code more self-explanatory
  mtd: rawnand: sunxi: replace hard coded value by a define - take2
  mtd: rawnand: sunxi: do not count BBM bytes twice
  mtd: rawnand: sunxi: fix sunxi_nfc_hw_ecc_read_extra_oob
  mtd: rawnand: sunxi: sunxi_nand_ooblayout_free code clarification
  mtd: cmdlinepart: use a flexible array member
  ...

1 files changed, 64 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/mtd/nand-property.yaml b/Documentation/devicetree/bindings/mtd/nand-property.yaml
new file mode 100644
index 000000000000..55488a4b1548
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/nand-property.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/nand-property.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAND Chip Common Properties
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+description: |
+  This file covers the generic properties of a NAND chip. It implies that the
+  bus interface should not be taken into account: both raw NAND devices and
+  SPI-NAND devices are concerned by this description.
+
+properties:
+  nand-ecc-engine:
+    description: |
+      A phandle on the hardware ECC engine if any. There are
+      basically three possibilities:
+      1/ The ECC engine is part of the NAND controller, in this
+      case the phandle should reference the parent node.
+      2/ The ECC engine is part of the NAND part (on-die), in this
+      case the phandle should reference the node itself.
+      3/ The ECC engine is external, in this case the phandle should
+      reference the specific ECC engine node.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nand-use-soft-ecc-engine:
+    description: Use a software ECC engine.
+    type: boolean
+
+  nand-no-ecc-engine:
+    description: Do not use any ECC correction.
+    type: boolean
+
+  nand-ecc-algo:
+    description:
+      Desired ECC algorithm.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [hamming, bch, rs]
+
+  nand-ecc-strength:
+    description:
+      Maximum number of bits that can be corrected per ECC step.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+
+  nand-ecc-step-size:
+    description:
+      Number of data bytes covered by a single ECC step.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+
+  secure-regions:
+    description:
+      Regions in the NAND chip which are protected using a secure element
+      like Trustzone. This property contains the start address and size of
+      the secure regions present.
+    $ref: /schemas/types.yaml#/definitions/uint64-matrix
+
+# This file can be referenced by more specific devices (like spi-nands)
+additionalProperties: true