diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2017-05-03 12:38:20 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2017-05-03 12:38:20 -0700 |
| commit | 16a12fa9aed176444fc795b09e796be41902bb08 (patch) | |
| tree | bd158def3263a8b0d0f0886fd0fcd32728242dc4 | |
| parent | d25e436c4b68db2895185b24ad1f22499c2f87b0 (diff) | |
| parent | 0337966d121ebebf73a1c346123e8112796e684e (diff) | |
| download | lwn-16a12fa9aed176444fc795b09e796be41902bb08.tar.gz lwn-16a12fa9aed176444fc795b09e796be41902bb08.zip | |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem updates from Dmitry Torokhov:
- a big update from Mauro converting input documentation to ReST format
- Synaptics PS/2 is now aware of SMBus companion devices, which means
that we can now use native RMI4 protocol to handle touchpads, instead
of relying on legacy PS/2 mode.
- we removed support from BMA180 accelerometer from input devices as it
is now handled properly by IIO
- update to TSC2007 to corretcly report pressure
- other miscellaneous driver fixes.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (152 commits)
Input: ar1021_i2c - use BIT to check for a bit
Input: twl4030-pwrbutton - use input_set_capability() helper
Input: twl4030-pwrbutton - use correct device for irq request
Input: ar1021_i2c - enable touch mode during open
Input: add uinput documentation
dt-bindings: input: add bindings document for ar1021_i2c driver
dt-bindings: input: rotary-encoder: fix typo
Input: xen-kbdfront - add module parameter for setting resolution
ARM: pxa/raumfeld: fix compile error in rotary controller resources
Input: xpad - do not suggest writing to Dominic
Input: xpad - don't use literal blocks inside footnotes
Input: xpad - note that usb/devices is now at /sys/kernel/debug/
Input: docs - freshen up introduction
Input: docs - split input docs into kernel- and user-facing
Input: docs - note that MT-A protocol is obsolete
Input: docs - update joystick documentation a bit
Input: docs - remove disclaimer/GPL notice
Input: fix "Game console" heading level in joystick documentation
Input: rotary-encoder - remove references to platform data from docs
Input: move documentation for Amiga CD32
...
129 files changed, 7608 insertions, 5390 deletions
diff --git a/Documentation/conf.py b/Documentation/conf.py index 08aef4595059..bacf9d337c89 100644 --- a/Documentation/conf.py +++ b/Documentation/conf.py @@ -348,6 +348,8 @@ latex_documents = [ 'The kernel development community', 'manual'), ('driver-api/index', 'driver-api.tex', 'The kernel driver API manual', 'The kernel development community', 'manual'), + ('input/index', 'linux-input.tex', 'The Linux input driver subsystem', + 'The kernel development community', 'manual'), ('kernel-documentation', 'kernel-documentation.tex', 'The Linux Kernel Documentation', 'The kernel development community', 'manual'), ('process/index', 'development-process.tex', 'Linux Kernel Development Documentation', diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt index d0ea09ba249f..570dc10f0cd7 100644 --- a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt +++ b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt @@ -24,6 +24,8 @@ Optional Properties: - debounce-delay-ms: debounce interval in milliseconds - col-scan-delay-us: delay, measured in microseconds, that is needed before we can scan keypad after activating column gpio +- drive-inactive-cols: drive inactive columns during scan, + default is to turn inactive columns into inputs. Example: matrix-keypad { diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.txt b/Documentation/devicetree/bindings/input/pwm-beeper.txt index 529408b4431a..8fc0e48c20db 100644 --- a/Documentation/devicetree/bindings/input/pwm-beeper.txt +++ b/Documentation/devicetree/bindings/input/pwm-beeper.txt @@ -8,6 +8,7 @@ Required properties: Optional properties: - amp-supply: phandle to a regulator that acts as an amplifier for the beeper +- beeper-hz: bell frequency in Hz Example: diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt index 4ed467b1e402..64bb990075c3 100644 --- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt +++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt @@ -7,6 +7,7 @@ PROPERTIES Value type: <string> Definition: must be one of: "qcom,pm8058-vib" + "qcom,pm8916-vib" "qcom,pm8921-vib" - reg: diff --git a/Documentation/devicetree/bindings/input/rotary-encoder.txt b/Documentation/devicetree/bindings/input/rotary-encoder.txt index e85ce3dea480..f99fe5cdeaec 100644 --- a/Documentation/devicetree/bindings/input/rotary-encoder.txt +++ b/Documentation/devicetree/bindings/input/rotary-encoder.txt @@ -12,7 +12,7 @@ Optional properties: - rotary-encoder,relative-axis: register a relative axis rather than an absolute one. Relative axis will only generate +1/-1 events on the input device, hence no steps need to be passed. -- rotary-encoder,rollover: Automatic rollove when the rotary value becomes +- rotary-encoder,rollover: Automatic rollover when the rotary value becomes greater than the specified steps or smaller than 0. For absolute axis only. - rotary-encoder,steps-per-period: Number of steps (stable states) per period. The values have the following meaning: diff --git a/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt b/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt index e3f22d23fc8f..3c8614c451f2 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt @@ -35,6 +35,7 @@ Optional properties: - adi,conversion-interval: : 0 : convert one time only 1-255: 515us + val * 35us (up to 9.440ms) This property has to be a '/bits/ 8' value +- gpio-controller : Switch AUX/VBAT/GPIO pin to GPIO mode Example: @@ -51,3 +52,21 @@ Example: adi,averaging = /bits/ 8 <1>; adi,conversion-interval = /bits/ 8 <255>; }; + + ad7879@1 { + compatible = "adi,ad7879"; + spi-max-frequency = <5000000>; + reg = <1>; + spi-cpol; + spi-cpha; + gpio-controller; + interrupt-parent = <&gpio1>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + touchscreen-max-pressure = <4096>; + adi,resistance-plate-x = <120>; + adi,first-conversion-delay = /bits/ 8 <3>; + adi,acquisition-time = /bits/ 8 <1>; + adi,median-filter-size = /bits/ 8 <2>; + adi,averaging = /bits/ 8 <1>; + adi,conversion-interval = /bits/ 8 <255>; + }; diff --git a/Documentation/devicetree/bindings/input/ads7846.txt b/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt index 9fc47b006fd1..9fc47b006fd1 100644 --- a/Documentation/devicetree/bindings/input/ads7846.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt diff --git a/Documentation/devicetree/bindings/input/touchscreen/ar1021.txt b/Documentation/devicetree/bindings/input/touchscreen/ar1021.txt new file mode 100644 index 000000000000..e459e8546f34 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/ar1021.txt @@ -0,0 +1,16 @@ +* Microchip AR1020 and AR1021 touchscreen interface (I2C) + +Required properties: +- compatible : "microchip,ar1021-i2c" +- reg : I2C slave address +- interrupt-parent : the phandle for the interrupt controller +- interrupts : touch controller interrupt + +Example: + + touchscreen@4d { + compatible = "microchip,ar1021-i2c"; + reg = <0x4d>; + interrupt-parent = <&gpio3>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt new file mode 100644 index 000000000000..40ac0fe94df6 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt @@ -0,0 +1,18 @@ +* MAXI MAX11801 Resistive touch screen controller with i2c interface + +Required properties: +- compatible: must be "maxim,max11801" +- reg: i2c slave address +- interrupt-parent: the phandle for the interrupt controller +- interrupts: touch controller interrupt + +Example: + +&i2c1 { + max11801: touchscreen@48 { + compatible = "maxim,max11801"; + reg = <0x48>; + interrupt-parent = <&gpio3>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + }; +}; diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt index ce85ee508238..6aa625e0cb8d 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt @@ -1,7 +1,12 @@ * GSL 1680 touchscreen controller Required properties: -- compatible : "silead,gsl1680" +- compatible : Must be one of the following, depending on the model: + "silead,gsl1680" + "silead,gsl1688" + "silead,gsl3670" + "silead,gsl3675" + "silead,gsl3692" - reg : I2C slave address of the chip (0x40) - interrupt-parent : a phandle pointing to the interrupt controller serving the interrupt for this chip diff --git a/Documentation/input/cd32.txt b/Documentation/input/cd32.txt deleted file mode 100644 index a003d9b41eca..000000000000 --- a/Documentation/input/cd32.txt +++ /dev/null @@ -1,19 +0,0 @@ -I have written a small patch that let's me use my Amiga CD32 -joypad connected to the parallel port. Thought I'd share it with you so -you can add it to the list of supported joysticks (hopefully someone will -find it useful). - -It needs the following wiring: - -CD32 pad | Parallel port ----------------------------- -1 (Up) | 2 (D0) -2 (Down) | 3 (D1) -3 (Left) | 4 (D2) -4 (Right) | 5 (D3) -5 (Fire3) | 14 (AUTOFD) -6 (Fire1) | 17 (SELIN) -7 (+5V) | 1 (STROBE) -8 (Gnd) | 18 (Gnd) -9 (Fire2) | 7 (D5) - diff --git a/Documentation/input/conf.py b/Documentation/input/conf.py new file mode 100644 index 000000000000..d2352fdc92ed --- /dev/null +++ b/Documentation/input/conf.py @@ -0,0 +1,10 @@ +# -*- coding: utf-8; mode: python -*- + +project = "The Linux input driver subsystem" + +tags.add("subproject") + +latex_documents = [ + ('index', 'linux-input.tex', project, + 'The kernel development community', 'manual'), +] diff --git a/Documentation/input/alps.txt b/Documentation/input/devices/alps.rst index 8d1341ccde64..6779148e428c 100644 --- a/Documentation/input/alps.txt +++ b/Documentation/input/devices/alps.rst @@ -1,10 +1,11 @@ +---------------------- ALPS Touchpad Protocol ---------------------- Introduction ------------ Currently the ALPS touchpad driver supports seven protocol versions in use by -ALPS touchpads, called versions 1, 2, 3, 4, 5, 6 and 7. +ALPS touchpads, called versions 1, 2, 3, 4, 5, 6, 7 and 8. Since roughly mid-2010 several new ALPS touchpads have been released and integrated into a variety of laptops and netbooks. These new touchpads @@ -78,7 +79,7 @@ of the EC response. Packet Format ------------- -In the following tables, the following notation is used. +In the following tables, the following notation is used:: CAPITALS = stick, miniscules = touchpad @@ -88,6 +89,8 @@ extra buttons, stick buttons on a dualpoint, etc. PS/2 packet format ------------------ +:: + byte 0: 0 0 YSGN XSGN 1 M R L byte 1: X7 X6 X5 X4 X3 X2 X1 X0 byte 2: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 @@ -99,7 +102,9 @@ are on the touchpad, the M R L bits signal the combined status of both the pointingstick and touchpad buttons. ALPS Absolute Mode - Protocol Version 1 --------------------------------------- +--------------------------------------- + +:: byte 0: 1 0 0 0 1 x9 x8 x7 byte 1: 0 x6 x5 x4 x3 x2 x1 x0 @@ -111,6 +116,8 @@ ALPS Absolute Mode - Protocol Version 1 ALPS Absolute Mode - Protocol Version 2 --------------------------------------- +:: + byte 0: 1 ? ? ? 1 PSM PSR PSL byte 1: 0 x6 x5 x4 x3 x2 x1 x0 byte 2: 0 x10 x9 x8 x7 ? fin ges @@ -127,6 +134,8 @@ and PSL bits. Dualpoint device -- interleaved packet format --------------------------------------------- +:: + byte 0: 1 1 0 0 1 1 1 1 byte 1: 0 x6 x5 x4 x3 x2 x1 x0 byte 2: 0 x10 x9 x8 x7 0 fin ges @@ -149,7 +158,7 @@ ALPS protocol version 3 has three different packet formats. The first two are associated with touchpad events, and the third is associated with trackstick events. -The first type is the touchpad position packet. +The first type is the touchpad position packet:: byte 0: 1 ? x1 x0 1 1 1 1 byte 1: 0 x10 x9 x8 x7 x6 x5 x4 @@ -165,7 +174,7 @@ The second packet type contains bitmaps representing the x and y axes. In the bitmaps a given bit is set if there is a finger covering that position on the given axis. Thus the bitmap packet can be used for low-resolution multi-touch data, although finger tracking is not possible. This packet also encodes the -number of contacts (f1 and f0 in the table below). +number of contacts (f1 and f0 in the table below):: byte 0: 1 1 x1 x0 1 1 1 1 byte 1: 0 x8 x7 x6 x5 x4 x3 x2 @@ -178,7 +187,7 @@ This packet only appears after a position packet with the mt bit set, and usually only appears when there are two or more contacts (although occasionally it's seen with only a single contact). -The final v3 packet type is the trackstick packet. +The final v3 packet type is the trackstick packet:: byte 0: 1 1 x7 y7 1 1 1 1 byte 1: 0 x6 x5 x4 x3 x2 x1 x0 @@ -190,7 +199,7 @@ The final v3 packet type is the trackstick packet. ALPS Absolute Mode - Protocol Version 4 --------------------------------------- -Protocol version 4 has an 8-byte packet format. +Protocol version 4 has an 8-byte packet format:: byte 0: 1 ? x1 x0 1 1 1 1 byte 1: 0 x10 x9 x8 x7 x6 x5 x4 @@ -203,7 +212,7 @@ Protocol version 4 has an 8-byte packet format. The last two bytes represent a partial bitmap packet, with 3 full packets required to construct a complete bitmap packet. Once assembled, the 6-byte -bitmap packet has the following format: +bitmap packet has the following format:: byte 0: 0 1 x7 x6 x5 x4 x3 x2 byte 1: 0 x1 x0 y4 y3 y2 y1 y0 @@ -238,7 +247,7 @@ decode. It uses the same alps_process_touchpad_packet_v3 call with a specialized decode_fields function pointer to correctly interpret the packets. This appears to only be used by the Dolphin devices. -For single-touch, the 6-byte packet format is: +For single-touch, the 6-byte packet format is:: byte 0: 1 1 0 0 1 0 0 0 byte 1: 0 x6 x5 x4 x3 x2 x1 x0 @@ -247,7 +256,7 @@ For single-touch, the 6-byte packet format is: byte 4: y10 y9 y8 y7 x10 x9 x8 x7 byte 5: 0 z6 z5 z4 z3 z2 z1 z0 -For mt, the format is: +For mt, the format is:: byte 0: 1 1 1 n3 1 n2 n1 x24 byte 1: 1 y7 y6 y5 y4 y3 y2 y1 @@ -259,7 +268,7 @@ For mt, the format is: ALPS Absolute Mode - Protocol Version 6 --------------------------------------- -For trackstick packet, the format is: +For trackstick packet, the format is:: byte 0: 1 1 1 1 1 1 1 1 byte 1: 0 X6 X5 X4 X3 X2 X1 X0 @@ -268,7 +277,7 @@ For trackstick packet, the format is: byte 4: Z7 Z6 Z5 Z4 Z3 Z2 Z1 Z0 byte 5: 0 1 1 1 1 1 1 1 -For touchpad packet, the format is: +For touchpad packet, the format is:: byte 0: 1 1 1 1 1 1 1 1 byte 1: 0 0 0 0 x3 x2 x1 x0 @@ -282,7 +291,7 @@ For touchpad packet, the format is: ALPS Absolute Mode - Protocol Version 7 --------------------------------------- -For trackstick packet, the format is: +For trackstick packet, the format is:: byte 0: 0 1 0 0 1 0 0 0 byte 1: 1 1 * * 1 M R L @@ -291,7 +300,7 @@ For trackstick packet, the format is: byte 4: Y7 0 Y5 Y4 Y3 1 1 0 byte 5: T&P 0 Z5 Z4 Z3 Z2 Z1 Z0 -For touchpad packet, the format is: +For touchpad packet, the format is:: packet-fmt b7 b6 b5 b4 b3 b2 b1 b0 byte 0: TWO & MULTI L 1 R M 1 Y0-2 Y0-1 Y0-0 @@ -328,7 +337,7 @@ Spoken by SS4 (73 03 14) and SS5 (73 03 28) hardware. The packet type is given by the APD field, bits 4-5 of byte 3. -Touchpad packet (APD = 0x2): +Touchpad packet (APD = 0x2):: b7 b6 b5 b4 b3 b2 b1 b0 byte 0: SWM SWR SWL 1 1 0 0 X7 @@ -340,7 +349,7 @@ Touchpad packet (APD = 0x2): SWM, SWR, SWL: Middle, Right, and Left button states -Touchpad 1 Finger packet (APD = 0x0): +Touchpad 1 Finger packet (APD = 0x0):: b7 b6 b5 b4 b3 b2 b1 b0 byte 0: SWM SWR SWL 1 1 X2 X1 X0 @@ -353,7 +362,7 @@ Touchpad 1 Finger packet (APD = 0x0): TAPF: ??? LFB: ??? -Touchpad 2 Finger packet (APD = 0x1): +Touchpad 2 Finger packet (APD = 0x1):: b7 b6 b5 b4 b3 b2 b1 b0 byte 0: SWM SWR SWL 1 1 AX6 AX5 AX4 @@ -365,7 +374,7 @@ Touchpad 2 Finger packet (APD = 0x1): CONT: A 3-or-4 Finger packet is to follow -Touchpad 3-or-4 Finger packet (APD = 0x3): +Touchpad 3-or-4 Finger packet (APD = 0x3):: b7 b6 b5 b4 b3 b2 b1 b0 byte 0: SWM SWR SWL 1 1 AX6 AX5 AX4 diff --git a/Documentation/input/amijoy.txt b/Documentation/input/devices/amijoy.rst index 7dc4f175943c..8df7b11cd98d 100644 --- a/Documentation/input/amijoy.txt +++ b/Documentation/input/devices/amijoy.rst @@ -1,67 +1,101 @@ +~~~~~~~~~~~~~~~~~~~~~~~~~ +Amiga joystick extensions +~~~~~~~~~~~~~~~~~~~~~~~~~ + + Amiga 4-joystick parport extension ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + Parallel port pins: - (2) - Up1 (6) - Up2 - (3) - Down1 (7) - Down2 - (4) - Left1 (8) - Left2 - (5) - Right1 (9) - Right2 -(13) - Fire1 (11) - Fire2 -(18) - Gnd1 (18) - Gnd2 + +===== ======== ==== ========== +Pin Meaning Pin Meaning +===== ======== ==== ========== + 2 Up1 6 Up2 + 3 Down1 7 Down2 + 4 Left1 8 Left2 + 5 Right1 9 Right2 +13 Fire1 11 Fire2 +18 Gnd1 18 Gnd2 +===== ======== ==== ========== Amiga digital joystick pinout ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -(1) - Up -(2) - Down -(3) - Left -(4) - Right -(5) - n/c -(6) - Fire button -(7) - +5V (50mA) -(8) - Gnd -(9) - Thumb button + +=== ============ +Pin Meaning +=== ============ +1 Up +2 Down +3 Left +4 Right +5 n/c +6 Fire button +7 +5V (50mA) +8 Gnd +9 Thumb button +=== ============ Amiga mouse pinout ~~~~~~~~~~~~~~~~~~ -(1) - V-pulse -(2) - H-pulse -(3) - VQ-pulse -(4) - HQ-pulse -(5) - Middle button -(6) - Left button -(7) - +5V (50mA) -(8) - Gnd -(9) - Right button + +=== ============ +Pin Meaning +=== ============ +1 V-pulse +2 H-pulse +3 VQ-pulse +4 HQ-pulse +5 Middle button +6 Left button +7 +5V (50mA) +8 Gnd +9 Right button +=== ============ Amiga analog joystick pinout ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -(1) - Top button -(2) - Top2 button -(3) - Trigger button -(4) - Thumb button -(5) - Analog X -(6) - n/c -(7) - +5V (50mA) -(8) - Gnd -(9) - Analog Y + +=== ============== +Pin Meaning +=== ============== +1 Top button +2 Top2 button +3 Trigger button +4 Thumb button +5 Analog X +6 n/c +7 +5V (50mA) +8 Gnd +9 Analog Y +=== ============== Amiga lightpen pinout ~~~~~~~~~~~~~~~~~~~~~ -(1) - n/c -(2) - n/c -(3) - n/c -(4) - n/c -(5) - Touch button -(6) - /Beamtrigger -(7) - +5V (50mA) -(8) - Gnd -(9) - Stylus button + +=== ============= +Pin Meaning +=== ============= +1 n/c +2 n/c +3 n/c +4 n/c +5 Touch button +6 /Beamtrigger +7 +5V (50mA) +8 Gnd +9 Stylus button +=== ============= ------------------------------------------------------------------------------- +======== === ==== ==== ====== ======================================== NAME rev ADDR type chip Description +======== === ==== ==== ====== ======================================== JOY0DAT 00A R Denise Joystick-mouse 0 data (left vert, horiz) JOY1DAT 00C R Denise Joystick-mouse 1 data (right vert,horiz) +======== === ==== ==== ====== ======================================== These addresses each read a 16 bit register. These in turn are loaded from the MDAT serial stream and are clocked in on @@ -71,12 +105,17 @@ JOY1DAT 00C R Denise Joystick-mouse 1 data (right vert,horiz) controller ports (8 total) plus 8 miscellaneous control bits which are new for LISA and can be read in upper 8 bits of LISAID. + Register bits are as follows: - Mouse counter usage (pins 1,3 =Yclock, pins 2,4 =Xclock) + - Mouse counter usage (pins 1,3 =Yclock, pins 2,4 =Xclock) + +======== === === === === === === === === ====== === === === === === === === BIT# 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00 +======== === === === === === === === === ====== === === === === === === === JOY0DAT Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 X7 X6 X5 X4 X3 X2 X1 X0 JOY1DAT Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 X7 X6 X5 X4 X3 X2 X1 X0 +======== === === === === === === === === ====== === === === === === === === 0=LEFT CONTROLLER PAIR, 1=RIGHT CONTROLLER PAIR. (4 counters total). The bit usage for both left and right @@ -86,14 +125,21 @@ JOY1DAT Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 X7 X6 X5 X4 X3 X2 X1 X0 +-------------------+-----------------------------------------+ | Serial | Bit Name | Description | - +--------+----------+-----------------------------------------+ + +========+==========+=========================================+ | 0 | M0H | JOY0DAT Horizontal Clock | + +--------+----------+-----------------------------------------+ | 1 | M0HQ | JOY0DAT Horizontal Clock (quadrature) | + +--------+----------+-----------------------------------------+ | 2 | M0V | JOY0DAT Vertical Clock | + +--------+----------+-----------------------------------------+ | 3 | M0VQ | JOY0DAT Vertical Clock (quadrature) | + +--------+----------+-----------------------------------------+ | 4 | M1V | JOY1DAT Horizontal Clock | + +--------+----------+-----------------------------------------+ | 5 | M1VQ | JOY1DAT Horizontal Clock (quadrature) | + +--------+----------+-----------------------------------------+ | 6 | M1V | JOY1DAT Vertical Clock | + +--------+----------+-----------------------------------------+ | 7 | M1VQ | JOY1DAT Vertical Clock (quadrature) | +--------+----------+-----------------------------------------+ @@ -104,46 +150,65 @@ JOY1DAT Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 X7 X6 X5 X4 X3 X2 X1 X0 +------------+------+---------------------------------+ | Directions | Pin# | Counter bits | - +------------+------+---------------------------------+ + +============+======+=================================+ | Forward | 1 | Y1 xor Y0 (BIT#09 xor BIT#08) | + +------------+------+---------------------------------+ | Left | 3 | Y1 | + +------------+------+---------------------------------+ | Back | 2 | X1 xor X0 (BIT#01 xor BIT#00) | + +------------+------+---------------------------------+ | Right | 4 | X1 | +------------+------+---------------------------------+ ------------------------------------------------------------------------------- +======== === ==== ==== ====== ================================================= NAME rev ADDR type chip Description +======== === ==== ==== ====== ================================================= JOYTEST 036 W Denise Write to all 4 joystick-mouse counters at once. +======== === ==== ==== ====== ================================================= Mouse counter write test data: + +========= === === === === === === === === ====== === === === === === === === BIT# 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00 +========= === === === === === === === === ====== === === === === === === === JOYxDAT Y7 Y6 Y5 Y4 Y3 Y2 xx xx X7 X6 X5 X4 X3 X2 xx xx JOYxDAT Y7 Y6 Y5 Y4 Y3 Y2 xx xx X7 X6 X5 X4 X3 X2 xx xx +========= === === === === === === === === ====== === === === === === === === ------------------------------------------------------------------------------- +======= === ==== ==== ====== ======================================== NAME rev ADDR type chip Description +======= === ==== ==== ====== ======================================== POT0DAT h 012 R Paula Pot counter data left pair (vert, horiz) POT1DAT h 014 R Paula Pot counter data right pair (vert,horiz) +======= === ==== ==== ====== ======================================== These addresses each read a pair of 8 bit pot counters. (4 counters total). The bit assignment for both addresses is shown below. The counters are stopped by signals from 2 controller connectors (left-right) with 2 pins each. +====== === === === === === === === === ====== === === === === === === === BIT# 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00 +====== === === === === === === === === ====== === === === === === === === RIGHT Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 X7 X6 X5 X4 X3 X2 X1 X0 LEFT Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 X7 X6 X5 X4 X3 X2 X1 X0 +====== === === === === === === === === ====== === === === === === === === +--------------------------+-------+ | CONNECTORS | PAULA | +-------+------+-----+-----+-------+ | Loc. | Dir. | Sym | pin | pin | - +-------+------+-----+-----+-------+ + +=======+======+=====+=====+=======+ | RIGHT | Y | RX | 9 | 33 | + +-------+------+-----+-----+-------+ | RIGHT | X | RX | 5 | 32 | + +-------+------+-----+-----+-------+ | LEFT | Y | LY | 9 | 36 | + +-------+------+-----+-----+-------+ | LEFT | X | LX | 5 | 35 | +-------+------+-----+-----+-------+ @@ -155,30 +220,44 @@ POT1DAT h 014 R Paula Pot counter data right pair (vert,horiz) ------------------------------------------------------------------------------- +====== === ==== ==== ====== ================================================ NAME rev ADDR type chip Description -POTGO 034 W Paula Pot port (4 bit) bi-direction and data, and pot counter start. +====== === ==== ==== ====== ================================================ +POTGO 034 W Paula Pot port (4 bit) bi-direction and data, and pot + counter start. +====== === ==== ==== ====== ================================================ ------------------------------------------------------------------------------- +====== === ==== ==== ====== ================================================ NAME rev ADDR type chip Description +====== === ==== ==== ====== ================================================ POTINP 016 R Paula Pot pin data read +====== === ==== ==== ====== ================================================ This register controls a 4 bit bi-direction I/O port that shares the same 4 pins as the 4 pot counters above. +-------+----------+---------------------------------------------+ | BIT# | FUNCTION | DESCRIPTION | - +-------+----------+---------------------------------------------+ + +=======+==========+=============================================+ | 15 | OUTRY | Output enable for Paula pin 33 | + +-------+----------+---------------------------------------------+ | 14 | DATRY | I/O data Paula pin 33 | + +-------+----------+---------------------------------------------+ | 13 | OUTRX | Output enable for Paula pin 32 | + +-------+----------+---------------------------------------------+ | 12 | DATRX | I/O data Paula pin 32 | + +-------+----------+---------------------------------------------+ | 11 | OUTLY | Out put enable for Paula pin 36 | + +-------+----------+---------------------------------------------+ | 10 | DATLY | I/O data Paula pin 36 | + +-------+----------+---------------------------------------------+ | 09 | OUTLX | Output enable for Paula pin 35 | + +-------+----------+---------------------------------------------+ | 08 | DATLX | I/O data Paula pin 35 | + +-------+----------+---------------------------------------------+ | 07-01 | X | Not used | + +-------+----------+---------------------------------------------+ | 00 | START | Start pots (dump capacitors,start counters) | +-------+----------+---------------------------------------------+ - -------------------------------------------------------------------------------- diff --git a/Documentation/input/appletouch.txt b/Documentation/input/devices/appletouch.rst index b13de3f89108..c94470e66533 100644 --- a/Documentation/input/appletouch.txt +++ b/Documentation/input/devices/appletouch.rst @@ -1,12 +1,17 @@ +.. include:: <isonum.txt> + +---------------------------------- Apple Touchpad Driver (appletouch) ---------------------------------- - Copyright (C) 2005 Stelian Pop <stelian@popies.net> + +:Copyright: |copy| 2005 Stelian Pop <stelian@popies.net> appletouch is a Linux kernel driver for the USB touchpad found on post February 2005 and October 2005 Apple Aluminium Powerbooks. -This driver is derived from Johannes Berg's appletrackpad driver[1], but it has -been improved in some areas: +This driver is derived from Johannes Berg's appletrackpad driver [#f1]_, +but it has been improved in some areas: + * appletouch is a full kernel driver, no userspace program is necessary * appletouch can be interfaced with the synaptics X11 driver, in order to have touchpad acceleration, scrolling, etc. @@ -16,8 +21,8 @@ Frank Arnold for further improvements, and Alex Harper for some additional information about the inner workings of the touchpad sensors. Michael Hanselmann added support for the October 2005 models. -Usage: ------- +Usage +----- In order to use the touchpad in the basic mode, compile the driver and load the module. A new input device will be detected and you will be able to read @@ -27,13 +32,13 @@ In X11, you can configure the touchpad to use the synaptics X11 driver, which will give additional functionalities, like acceleration, scrolling, 2 finger tap for middle button mouse emulation, 3 finger tap for right button mouse emulation, etc. In order to do this, make sure you're using a recent version of -the synaptics driver (tested with 0.14.2, available from [2]), and configure a -new input device in your X11 configuration file (take a look below for an -example). For additional configuration, see the synaptics driver documentation. +the synaptics driver (tested with 0.14.2, available from [#f2]_), and configure +a new input device in your X11 configuration file (take a look below for an +example). For additional configuration, see the synaptics driver documentation:: Section "InputDevice" - Identifier "Synaptics Touchpad" - Driver "synaptics" + Identifier "Synaptics Touchpad" + Driver "synaptics" Option "SendCoreEvents" "true" Option "Device" "/dev/input/mice" Option "Protocol" "auto-dev" @@ -60,8 +65,8 @@ example). For additional configuration, see the synaptics driver documentation. ... EndSection -Fuzz problems: --------------- +Fuzz problems +------------- The touchpad sensors are very sensitive to heat, and will generate a lot of noise when the temperature changes. This is especially true when you power-on @@ -73,13 +78,17 @@ the driver. You can activate debugging using the 'debug' module parameter. A value of 0 deactivates any debugging, 1 activates tracing of invalid samples, 2 activates -full tracing (each sample is being traced): +full tracing (each sample is being traced):: + modprobe appletouch debug=1 - or + +or:: + echo "1" > /sys/module/appletouch/parameters/debug -Links: ------- -[1]: http://johannes.sipsolutions.net/PowerBook/touchpad/ -[2]: http://web.archive.org/web/*/http://web.telia.com/~u89404340/touchpad/index.html +.. Links: + +.. [#f1] http://johannes.sipsolutions.net/PowerBook/touchpad/ + +.. [#f2] `<http://web.archive.org/web/*/http://web.telia.com/~u89404340/touchpad/index.html>`_ diff --git a/Documentation/input/atarikbd.txt b/Documentation/input/devices/atarikbd.rst index f3a3ba8847ba..745e7a1ff122 100644 --- a/Documentation/input/atarikbd.txt +++ b/Documentation/input/devices/atarikbd.rst @@ -1,7 +1,10 @@ +==================================== Intelligent Keyboard (ikbd) Protocol +==================================== -1. Introduction +Introduction +============ The Atari Corp. Intelligent Keyboard (ikbd) is a general purpose keyboard controller that is flexible enough that it can be used in a variety of @@ -18,7 +21,8 @@ different applications of the keyboard, joysticks, or mouse. Limited use of the controller is possible in applications in which only a unidirectional communications medium is available by carefully designing the default modes. -3. Keyboard +Keyboard +======== The keyboard always returns key make/break scan codes. The ikbd generates keyboard scan codes for each key press and release. The key scan make (key @@ -28,19 +32,25 @@ exists in that position on a particular keyboard. The break code for each key is obtained by ORing 0x80 with the make code. The special codes 0xF6 through 0xFF are reserved for use as follows: + +=================== ==================================================== + Code Command +=================== ==================================================== 0xF6 status report 0xF7 absolute mouse position record 0xF8-0xFB relative mouse position records (lsbs determined by - mouse button states) + mouse button states) 0xFC time-of-day 0xFD joystick report (both sticks) 0xFE joystick 0 event 0xFF joystick 1 event +=================== ==================================================== The two shift keys return different scan codes in this mode. The ENTER key and the RETurn key are also distinct. -4. Mouse +Mouse +===== The mouse port should be capable of supporting a mouse with resolution of approximately 200 counts (phase changes or 'clicks') per inch of travel. The @@ -53,7 +63,8 @@ key equivalents. The mouse buttons can be treated as part of the mouse or as additional keyboard keys. -4.1 Relative Position Reporting +Relative Position Reporting +--------------------------- In relative position mode, the ikbd will return relative mouse position records whenever a mouse event occurs. A mouse event consists of a mouse @@ -67,7 +78,8 @@ been 'paused' ( the event will be stored until keyboard communications is resumed) (b) while any event is being transmitted. The relative mouse position record is a three byte record of the form -(regardless of keyboard mode): +(regardless of keyboard mode):: + %111110xy ; mouse position record flag ; where y is the right button state ; and x is the left button state @@ -81,13 +93,15 @@ If the accumulated motion before the report packet is generated exceeds the Note that the sign of the delta y reported is a function of the Y origin selected. -4.2 Absolute Position reporting +Absolute Position reporting +--------------------------- The ikbd can also maintain absolute mouse position. Commands exist for resetting the mouse position, setting X/Y scaling, and interrogating the current mouse position. -4.3 Mouse Cursor Key Mode +Mouse Cursor Key Mode +--------------------- The ikbd can translate mouse motion into the equivalent cursor keystrokes. The number of mouse clicks per keystroke is independently programmable in @@ -99,32 +113,38 @@ break code for the appropriate cursor key. The mouse buttons produce scan codes above those normally assigned for the largest envisioned keyboard (i.e. LEFT=0x74 & RIGHT=0x75). -5. Joystick +Joystick +======== -5.1 Joystick Event Reporting +Joystick Event Reporting +------------------------ In this mode, the ikbd generates a record whenever the joystick position is changed (i.e. for each opening or closing of a joystick switch or trigger). -The joystick event record is two bytes of the form: +The joystick event record is two bytes of the form:: + %1111111x ; Joystick event marker ; where x is Joystick 0 or 1 %x000yyyy ; where yyyy is the stick position ; and x is the trigger -5.2 Joystick Interrogation +Joystick Interrogation +---------------------- The current state of the joystick ports may be interrogated at any time in this mode by sending an 'Interrogate Joystick' command to the ikbd. -The ikbd response to joystick interrogation is a three byte report of the form +The ikbd response to joystick interrogation is a three byte report of the form:: + 0xFD ; joystick report header %x000yyyy ; Joystick 0 %x000yyyy ; Joystick 1 ; where x is the trigger ; and yyy is the stick position -5.3 Joystick Monitoring +Joystick Monitoring +------------------- A mode is available that devotes nearly all of the keyboard communications time to reporting the state of the joystick ports at a user specifiable rate. @@ -132,7 +152,8 @@ It remains in this mode until reset or commanded into another mode. The PAUSE command in this mode not only stop the output but also temporarily stops scanning the joysticks (samples are not queued). -5.4 Fire Button Monitoring +Fire Button Monitoring +---------------------- A mode is provided to permit monitoring a single input bit at a high rate. In this mode the ikbd monitors the state of the Joystick 1 fire button at the @@ -142,7 +163,8 @@ until reset or commanded into another mode. The PAUSE command in this mode not only stops the output but also temporarily stops scanning the button (samples are not queued). -5.5 Joystick Key Code Mode +Joystick Key Code Mode +---------------------- The ikbd may be commanded to translate the use of either joystick into the equivalent cursor control keystroke(s). The ikbd provides a single breakpoint @@ -152,18 +174,21 @@ for the appropriate cursor motion keys. The trigger or fire buttons of the joysticks produce pseudo key scan codes above those used by the largest key matrix envisioned (i.e. JOYSTICK0=0x74, JOYSTICK1=0x75). -6. Time-of-Day Clock +Time-of-Day Clock +================= The ikbd also maintains a time-of-day clock for the system. Commands are available to set and interrogate the timer-of-day clock. Time-keeping is maintained down to a resolution of one second. -7. Status Inquiries +Status Inquiries +================ The current state of ikbd modes and parameters may be found by sending status inquiry commands that correspond to the ikbd set commands. -8. Power-Up Mode +Power-Up Mode +============= The keyboard controller will perform a simple self-test on power-up to detect major controller faults (ROM checksum and RAM test) and such things as stuck @@ -183,13 +208,17 @@ both buttons are logically connected to it. If a mouse disable command is received while port 0 is presumed to be a mouse, the button is logically assigned to Joystick1 (until the mouse is reenabled by another mouse command). -9. ikbd Command Set +ikbd Command Set +================ This section contains a list of commands that can be sent to the ikbd. Command codes (such as 0x00) which are not specified should perform no operation (NOPs). -9.1 RESET +RESET +----- + +:: 0x80 0x01 @@ -208,7 +237,10 @@ ikbd will then scan the key matrix for any stuck (closed) keys. Any keys found closed will cause the break scan code to be generated (the break code arriving without being preceded by the make code is a flag for a key matrix error). -9.2. SET MOUSE BUTTON ACTION +SET MOUSE BUTTON ACTION +----------------------- + +:: 0x07 %00000mss ; mouse button action @@ -217,14 +249,17 @@ without being preceded by the make code is a flag for a key matrix error). ; position report ; where y=1, mouse key press causes absolute report ; and x=1, mouse key release causes absolute report - ; mss=100, mouse buttons act like keys + ; mss=100, mouse buttons act like keys This command sets how the ikbd should treat the buttons on the mouse. The default mouse button action mode is %00000000, the buttons are treated as part of the mouse logically. When buttons act like keys, LEFT=0x74 & RIGHT=0x75. -9.3 SET RELATIVE MOUSE POSITION REPORTING +SET RELATIVE MOUSE POSITION REPORTING +------------------------------------- + +:: 0x08 @@ -235,14 +270,17 @@ key mode, mouse position reports may also be generated when either mouse button is pressed or released. Otherwise the mouse buttons behave as if they were keyboard keys. -9.4 SET ABSOLUTE MOUSE POSITIONING +SET ABSOLUTE MOUSE POSITIONING +------------------------------ + +:: 0x09 XMSB ; X maximum (in scaled mouse clicks) XLSB YMSB ; Y maximum (in scaled mouse clicks) YLSB - + Set absolute mouse position maintenance. Resets the ikbd maintained X and Y coordinates. In this mode, the value of the internally maintained coordinates does NOT wrap @@ -250,7 +288,10 @@ between 0 and large positive numbers. Excess motion below 0 is ignored. The command sets the maximum positive value that can be attained in the scaled coordinate system. Motion beyond that value is also ignored. -9.5 SET MOUSE KEYCODE MOSE +SET MOUSE KEYCODE MOSE +---------------------- + +:: 0x0A deltax ; distance in X clicks to return (LEFT) or (RIGHT) @@ -263,7 +304,10 @@ either axis. When the keyboard is in key scan code mode, mouse motion will cause the make code immediately followed by the break code. Note that this command is not affected by the mouse motion origin. -9..6 SET MOUSE THRESHOLD +SET MOUSE THRESHOLD +------------------- + +:: 0x0B X ; x threshold in mouse ticks (positive integers) @@ -274,7 +318,10 @@ it does NOT affect the resolution of the data returned to the host. This command is valid only in RELATIVE MOUSE POSITIONING mode. The thresholds default to 1 at RESET (or power-up). -9.7 SET MOUSE SCALE +SET MOUSE SCALE +--------------- + +:: 0x0C X ; horizontal mouse ticks per internal X @@ -288,7 +335,10 @@ information is available only by interrogating the ikbd in the ABSOLUTE MOUSE POSITIONING mode unless the ikbd has been commanded to report on button press or release (see SET MOSE BUTTON ACTION). -9.8 INTERROGATE MOUSE POSITION +INTERROGATE MOUSE POSITION +-------------------------- + +:: 0x0D Returns: @@ -306,7 +356,10 @@ or release (see SET MOSE BUTTON ACTION). The INTERROGATE MOUSE POSITION command is valid when in the ABSOLUTE MOUSE POSITIONING mode, regardless of the setting of the MOUSE BUTTON ACTION. -9.9 LOAD MOUSE POSITION +LOAD MOUSE POSITION +------------------- + +:: 0x0E 0x00 ; filler @@ -318,7 +371,10 @@ POSITIONING mode, regardless of the setting of the MOUSE BUTTON ACTION. This command allows the user to preset the internally maintained absolute mouse position. -9.10 SET Y=0 AT BOTTOM +SET Y=0 AT BOTTOM +----------------- + +:: 0x0F @@ -327,7 +383,10 @@ logical coordinate system internal to the ikbd for all relative or absolute mouse motion. This causes mouse motion toward the user to be negative in sign and away from the user to be positive. -9.11 SET Y=0 AT TOP +SET Y=0 AT TOP +-------------- + +:: 0x10 @@ -336,7 +395,10 @@ system within the ikbd for all relative or absolute mouse motion. (DEFAULT) This causes mouse motion toward the user to be positive in sign and away from the user to be negative. -9.12 RESUME +RESUME +------ + +:: 0x11 @@ -345,7 +407,10 @@ its output has been paused also causes an implicit RESUME this command can be thought of as a NO OPERATION command. If this command is received by the ikbd and it is not PAUSED, it is simply ignored. -9.13 DISABLE MOUSE +DISABLE MOUSE +------------- + +:: 0x12 @@ -356,7 +421,10 @@ ABSOLUTE MOUSE POSITIONING, and SET MOUSE KEYCODE MODE. ) N.B. If the mouse buttons have been commanded to act like keyboard keys, this command DOES affect their actions. -9.14 PAUSE OUTPUT +PAUSE OUTPUT +------------ + +:: 0x13 @@ -381,21 +449,30 @@ When the ikbd is in either the JOYSTICK MONITORING mode or the FIRE BUTTON MONITORING mode, the PAUSE OUTPUT command also temporarily stops the monitoring process (i.e. the samples are not enqueued for transmission). -0.15 SET JOYSTICK EVENT REPORTING +SET JOYSTICK EVENT REPORTING +---------------------------- + +:: 0x14 Enter JOYSTICK EVENT REPORTING mode (DEFAULT). Each opening or closure of a joystick switch or trigger causes a joystick event record to be generated. -9.16 SET JOYSTICK INTERROGATION MODE +SET JOYSTICK INTERROGATION MODE +------------------------------- + +:: 0x15 Disables JOYSTICK EVENT REPORTING. Host must send individual JOYSTICK INTERROGATE commands to sense joystick state. -9.17 JOYSTICK INTERROGATE +JOYSTICK INTERROGATE +-------------------- + +:: 0x16 @@ -403,7 +480,10 @@ Return a record indicating the current state of the joysticks. This command is valid in either the JOYSTICK EVENT REPORTING mode or the JOYSTICK INTERROGATION MODE. -9.18 SET JOYSTICK MONITORING +SET JOYSTICK MONITORING +----------------------- + +:: 0x17 rate ; time between samples in hundredths of a second @@ -419,7 +499,10 @@ between joystick samples. N.B. The user should not set the rate higher than the serial communications channel will allow the 2 bytes packets to be transmitted. -9.19 SET FIRE BUTTON MONITORING +SET FIRE BUTTON MONITORING +-------------------------- + +:: 0x18 Returns: (as long as in mode) @@ -432,7 +515,10 @@ is scanned at a rate that causes 8 samples to be made in the time it takes for the previous byte to be sent to the host (i.e. scan rate = 8/10 * baud rate). The sample interval should be as constant as possible. -9.20 SET JOYSTICK KEYCODE MODE +SET JOYSTICK KEYCODE MODE +------------------------- + +:: 0x19 RX ; length of time (in tenths of seconds) until @@ -462,7 +548,10 @@ Note that by setting RX and/or Ry to zero, the velocity feature can be disabled. The values of TX and TY then become meaningless, and the generation of cursor 'keystrokes' is set by VX and VY. -9.21 DISABLE JOYSTICKS +DISABLE JOYSTICKS +----------------- + +:: 0x1A @@ -472,7 +561,10 @@ joystick mode commands are SET JOYSTICK EVENT REPORTING, SET JOYSTICK INTERROGATION MODE, SET JOYSTICK MONITORING, SET FIRE BUTTON MONITORING, and SET JOYSTICK KEYCODE MODE.) -9.22 TIME-OF-DAY CLOCK SET +TIME-OF-DAY CLOCK SET +--------------------- + +:: 0x1B YY ; year (2 least significant digits) @@ -487,7 +579,10 @@ Any digit that is not a valid BCD digit should be treated as a 'don't care' and not alter that particular field of the date or time. This permits setting only some subfields of the time-of-day clock. -9.23 INTERROGATE TIME-OF-DAT CLOCK +INTERROGATE TIME-OF-DAT CLOCK +----------------------------- + +:: 0x1C Returns: @@ -501,7 +596,10 @@ only some subfields of the time-of-day clock. All time-of-day is sent in packed BCD format. -9.24 MEMORY LOAD +MEMORY LOAD +----------- + +:: 0x20 ADRMSB ; address in controller @@ -512,7 +610,10 @@ only some subfields of the time-of-day clock. This command permits the host to load arbitrary values into the ikbd controller memory. The time between data bytes must be less than 20ms. -9.25 MEMORY READ +MEMORY READ +----------- + +:: 0x21 ADRMSB ; address in controller @@ -524,7 +625,10 @@ controller memory. The time between data bytes must be less than 20ms. This command permits the host to read from the ikbd controller memory. -9.26 CONTROLLER EXECUTE +CONTROLLER EXECUTE +------------------ + +:: 0x22 ADRMSB ; address of subroutine in @@ -533,8 +637,11 @@ This command permits the host to read from the ikbd controller memory. This command allows the host to command the execution of a subroutine in the ikbd controller memory. -9.27 STATUS INQUIRIES - +STATUS INQUIRIES +---------------- + +:: + Status commands are formed by inclusively ORing 0x80 with the relevant SET command. @@ -568,7 +675,7 @@ off the status report header byte) and later send them back as commands to ikbd to restore its state. The 0 pad bytes will be treated as NOPs by the ikbd. - Valid STATUS INQUIRY commands are: + Valid STATUS INQUIRY commands are:: 0x87 mouse button action 0x88 mouse mode @@ -595,14 +702,17 @@ STATUS INQUIRY commands are not valid if the ikbd is in JOYSTICK MONITORING mode or FIRE BUTTON MONITORING mode. -10. SCAN CODES +SCAN CODES +========== The key scan codes returned by the ikbd are chosen to simplify the implementation of GSX. -GSX Standard Keyboard Mapping. +GSX Standard Keyboard Mapping +======= ============ Hex Keytop +======= ============ 01 Esc 02 1 03 2 @@ -614,8 +724,8 @@ Hex Keytop 09 8 0A 9 0B 0 -0C - -0D == +0C \- +0D \= 0E BS 0F TAB 10 Q @@ -643,9 +753,9 @@ Hex Keytop 26 L 27 ; 28 ' -29 ` +29 \` 2A (LEFT) SHIFT -2B \ +2B \\ 2C Z 2D X 2E C @@ -707,3 +817,4 @@ Hex Keytop 70 KEYPAD 0 71 KEYPAD . 72 KEYPAD ENTER +======= ============ diff --git a/Documentation/input/bcm5974.txt b/Documentation/input/devices/bcm5974.rst index 74d3876d6f34..4aca199b0aa6 100644 --- a/Documentation/input/bcm5974.txt +++ b/Documentation/input/devices/bcm5974.rst @@ -1,19 +1,25 @@ +.. include:: <isonum.txt> + +------------------------ BCM5974 Driver (bcm5974) ------------------------ - Copyright (C) 2008-2009 Henrik Rydberg <rydberg@euromail.se> + +:Copyright: |copy| 2008-2009 Henrik Rydberg <rydberg@euromail.se> The USB initialization and package decoding was made by Scott Shawcroft as part of the touchd user-space driver project: - Copyright (C) 2008 Scott Shawcroft (scott.shawcroft@gmail.com) + +:Copyright: |copy| 2008 Scott Shawcroft (scott.shawcroft@gmail.com) The BCM5974 driver is based on the appletouch driver: - Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com) - Copyright (C) 2005 Johannes Berg (johannes@sipsolutions.net) - Copyright (C) 2005 Stelian Pop (stelian@popies.net) - Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de) - Copyright (C) 2005 Peter Osterlund (petero2@telia.com) - Copyright (C) 2005 Michael Hanselmann (linux-kernel@hansmi.ch) - Copyright (C) 2006 Nicolas Boichat (nicolas@boichat.ch) + +:Copyright: |copy| 2001-2004 Greg Kroah-Hartman (greg@kroah.com) +:Copyright: |copy| 2005 Johannes Berg (johannes@sipsolutions.net) +:Copyright: |copy| 2005 Stelian Pop (stelian@popies.net) +:Copyright: |copy| 2005 Frank Arnold (frank@scirocco-5v-turbo.de) +:Copyright: |copy| 2005 Peter Osterlund (petero2@telia.com) +:Copyright: |copy| 2005 Michael Hanselmann (linux-kernel@hansmi.ch) +:Copyright: |copy| 2006 Nicolas Boichat (nicolas@boichat.ch) This driver adds support for the multi-touch trackpad on the new Apple Macbook Air and Macbook Pro laptops. It replaces the appletouch driver on @@ -44,22 +50,21 @@ Debug output To ease the development for new hardware version, verbose packet output can be switched on with the debug kernel module parameter. The range [1-9] -yields different levels of verbosity. Example (as root): +yields different levels of verbosity. Example (as root):: -echo -n 9 > /sys/module/bcm5974/parameters/debug + echo -n 9 > /sys/module/bcm5974/parameters/debug -tail -f /var/log/debug + tail -f /var/log/debug -echo -n 0 > /sys/module/bcm5974/parameters/debug + echo -n 0 > /sys/module/bcm5974/parameters/debug Trivia ------ -The driver was developed at the ubuntu forums in June 2008 [1], and now has -a more permanent home at bitmath.org [2]. +The driver was developed at the ubuntu forums in June 2008 [#f1]_, and now has +a more permanent home at bitmath.org [#f2]_. -Links ------ +.. Links -[1] http://ubuntuforums.org/showthread.php?t=840040 -[2] http://bitmath.org/code/ +.. [#f1] http://ubuntuforums.org/showthread.php?t=840040 +.. [#f2] http://bitmath.org/code/ diff --git a/Documentation/input/cma3000_d0x.txt b/Documentation/input/devices/cma3000_d0x.rst index 29d088db4afd..8bc8e61487b0 100644 --- a/Documentation/input/cma3000_d0x.txt +++ b/Documentation/input/devices/cma3000_d0x.rst @@ -1,30 +1,37 @@ -Kernel driver for CMA3000-D0x -============================ +CMA3000-D0x Accelerometer +========================= Supported chips: * VTI CMA3000-D0x + Datasheet: CMA3000-D0X Product Family Specification 8281000A.02.pdf <http://www.vti.fi/en/> -Author: Hemanth V <hemanthv@ti.com> +:Author: Hemanth V <hemanthv@ti.com> Description ----------- + CMA3000 Tri-axis accelerometer supports Motion detect, Measurement and Free fall modes. -Motion Detect Mode: Its the low power mode where interrupts are generated only -when motion exceeds the defined thresholds. +Motion Detect Mode: + Its the low power mode where interrupts are generated only + when motion exceeds the defined thresholds. -Measurement Mode: This mode is used to read the acceleration data on X,Y,Z -axis and supports 400, 100, 40 Hz sample frequency. +Measurement Mode: + This mode is used to read the acceleration data on X,Y,Z + axis and supports 400, 100, 40 Hz sample frequency. -Free fall Mode: This mode is intended to save system resources. +Free fall Mode: + This mode is intended to save system resources. -Threshold values: Chip supports defining threshold values for above modes -which includes time and g value. Refer product specifications for more details. +Threshold values: + Chip supports defining threshold values for above modes + which includes time and g value. Refer product specifications for + more details. CMA3000 chip supports mutually exclusive I2C and SPI interfaces for communication, currently the driver supports I2C based communication only. @@ -38,28 +45,40 @@ Platform data need to be configured for initial default values. Platform Data ------------- -fuzz_x: Noise on X Axis -fuzz_y: Noise on Y Axis +fuzz_x: + Noise on X Axis -fuzz_z: Noise on Z Axis +fuzz_y: + Noise on Y Axis -g_range: G range in milli g i.e 2000 or 8000 +fuzz_z: + Noise on Z Axis -mode: Default Operating mode +g_range: + G range in milli g i.e 2000 or 8000 -mdthr: Motion detect g range threshold value +mode: + Default Operating mode + +mdthr: + Motion detect g range threshold value -mdfftmr: Motion detect and free fall time threshold value +mdfftmr: + Motion detect and free fall time threshold value -ffthr: Free fall g range threshold value +ffthr: + Free fall g range threshold value Input Interface --------------- +--------------- + Input driver version is 1.0.0 Input device ID: bus 0x18 vendor 0x0 product 0x0 version 0x0 Input device name: "cma3000-accelerometer" -Supported events: + +Supported events:: + Event type 0 (Sync) Event type 3 (Absolute) Event code 0 (X) @@ -87,7 +106,8 @@ Supported events: Register/Platform parameters Description ---------------------------------------- -mode: +mode:: + 0: power down mode 1: 100 Hz Measurement mode 2: 400 Hz Measurement mode @@ -97,19 +117,23 @@ mode: 6: 40 Hz Free fall mode 7: Power off mode -grange: +grange:: + 2000: 2000 mg or 2G Range 8000: 8000 mg or 8G Range -mdthr: +mdthr:: + X: X * 71mg (8G Range) X: X * 18mg (2G Range) -mdfftmr: +mdfftmr:: + X: (X & 0x70) * 100 ms (MDTMR) (X & 0x0F) * 2.5 ms (FFTMR 400 Hz) (X & 0x0F) * 10 ms (FFTMR 100 Hz) -ffthr: +ffthr:: + X: (X >> 2) * 18mg (2G Range) X: (X & 0x0F) * 71 mg (8G Range) diff --git a/Documentation/input/cs461x.txt b/Documentation/input/devices/cs461x.rst index 202e9dbacec3..b1e6d508ad26 100644 --- a/Documentation/input/cs461x.txt +++ b/Documentation/input/devices/cs461x.rst @@ -1,36 +1,34 @@ -Preface. +Crystal SoundFusion CS4610/CS4612/CS461 joystick +================================================ This is a new low-level driver to support analog joystick attached to -Crystal SoundFusion CS4610/CS4612/CS4615. This code is based upon +Crystal SoundFusion CS4610/CS4612/CS4615. This code is based upon Vortex/Solo drivers as an example of decoration style, and ALSA 0.5.8a kernel drivers as an chipset documentation and samples. -This version does not have cooked mode support; the basic code -is present here, but have not tested completely. The button analysis -is completed in this mode, but the axis movement is not. +This version does not have cooked mode support; the basic code +is present here, but have not tested completely. The button analysis +is completed in this mode, but the axis movement is not. Raw mode works fine with analog joystick front-end driver and cs461x -driver as a backend. I've tested this driver with CS4610, 4-axis and +driver as a backend. I've tested this driver with CS4610, 4-axis and 4-button joystick; I mean the jstest utility. Also I've tried to play in xracer game using joystick, and the result is better than keyboard only mode. The sensitivity and calibrate quality have not been tested; the two -reasons are performed: the same hardware cannot work under Win95 (blue -screen in VJOYD); I have no documentation on my chip; and the existing -behavior in my case was not raised the requirement of joystick calibration. +reasons are performed: the same hardware cannot work under Win95 (blue +screen in VJOYD); I have no documentation on my chip; and the existing +behavior in my case was not raised the requirement of joystick calibration. So the driver have no code to perform hardware related calibration. -The patch contains minor changes of Config.in and Makefile files. All -needed code have been moved to one separate file cs461x.c like ns558.c This driver have the basic support for PCI devices only; there is no -ISA or PnP ISA cards supported. AFAIK the ns558 have support for Crystal -ISA and PnP ISA series. +ISA or PnP ISA cards supported. The driver works with ALSA drivers simultaneously. For example, the xracer uses joystick as input device and PCM device as sound output in one time. There are no sound or input collisions detected. The source code have -comments about them; but I've found the joystick can be initialized +comments about them; but I've found the joystick can be initialized separately of ALSA modules. So, you can use only one joystick driver without ALSA drivers. The ALSA drivers are not needed to compile or run this driver. @@ -38,7 +36,7 @@ run this driver. There are no debug information print have been placed in source, and no specific options required to work this driver. The found chipset parameters are printed via printk(KERN_INFO "..."), see the /var/log/messages to -inspect cs461x: prefixed messages to determine possible card detection +inspect cs461x: prefixed messages to determine possible card detection errors. Regards, diff --git a/Documentation/input/edt-ft5x06.txt b/Documentation/input/devices/edt-ft5x06.rst index 2032f0b7a8fa..2032f0b7a8fa 100644 --- a/Documentation/input/edt-ft5x06.txt +++ b/Documentation/input/devices/edt-ft5x06.rst diff --git a/Documentation/input/elantech.txt b/Documentation/input/devices/elantech.rst index 1ec0db7879d3..c3374a7ce7af 100644 --- a/Documentation/input/elantech.txt +++ b/Documentation/input/devices/elantech.rst @@ -10,9 +10,7 @@ Elantech Touchpad Driver received from Woody at Xandros and forwarded to me by user StewieGriffin at the eeeuser.com forum - -Contents -~~~~~~~~ +.. Contents 1. Introduction 2. Extra knobs @@ -45,8 +43,8 @@ Contents -1. Introduction - ~~~~~~~~~~~~ +Introduction +~~~~~~~~~~~~ Currently the Linux Elantech touchpad driver is aware of four different hardware versions unimaginatively called version 1,version 2, version 3 @@ -88,11 +86,8 @@ available Elantech documentation the information is provided here anyway for completeness sake. -///////////////////////////////////////////////////////////////////////////// - - -2. Extra knobs - ~~~~~~~~~~~ +Extra knobs +~~~~~~~~~~~ Currently the Linux Elantech touchpad driver provides three extra knobs under /sys/bus/serio/drivers/psmouse/serio? for the user. @@ -142,18 +137,17 @@ Currently the Linux Elantech touchpad driver provides three extra knobs under Reading the crc_enabled value will show the active value. Echoing "0" or "1" to this file will set the state to "0" or "1". -///////////////////////////////////////////////////////////////////////////// +Differentiating hardware versions +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -3. Differentiating hardware versions - ================================= - -To detect the hardware version, read the version number as param[0].param[1].param[2] +To detect the hardware version, read the version number as param[0].param[1].param[2]:: 4 bytes version: (after the arrow is the name given in the Dell-provided driver) 02.00.22 => EF013 02.06.00 => EF019 + In the wild, there appear to be more versions, such as 00.01.64, 01.00.21, -02.00.00, 02.00.04, 02.00.06. +02.00.00, 02.00.04, 02.00.06:: 6 bytes: 02.00.30 => EF113 @@ -162,6 +156,7 @@ In the wild, there appear to be more versions, such as 00.01.64, 01.00.21, 02.0B.00 => EF215 04.01.XX => Scroll_EF051 04.02.XX => EF051 + In the wild, there appear to be more versions, such as 04.03.01, 04.04.11. There appears to be almost no difference, except for EF113, which does not report pressure/width and has different data consistency checks. @@ -170,21 +165,20 @@ Probably all the versions with param[0] <= 01 can be considered as 4 bytes/firmware 1. The versions < 02.08.00, with the exception of 02.00.30, as 4 bytes/firmware 2. Everything >= 02.08.00 can be considered as 6 bytes. -///////////////////////////////////////////////////////////////////////////// -4. Hardware version 1 - ================== +Hardware version 1 +~~~~~~~~~~~~~~~~~~ -4.1 Registers - ~~~~~~~~~ +Registers +--------- By echoing a hexadecimal value to a register it contents can be altered. -For example: +For example:: echo -n 0x16 > reg_10 -* reg_10 +* reg_10:: bit 7 6 5 4 3 2 1 0 B C T D L A S E @@ -198,7 +192,7 @@ For example: C: 1 = enable corner tap B: 1 = swap left and right button -* reg_11 +* reg_11:: bit 7 6 5 4 3 2 1 0 1 0 0 H V 1 F P @@ -208,40 +202,41 @@ For example: V: 1 = enable vertical scroll area H: 1 = enable horizontal scroll area -* reg_20 +* reg_20:: single finger width? -* reg_21 +* reg_21:: scroll area width (small: 0x40 ... wide: 0xff) -* reg_22 +* reg_22:: drag lock time out (short: 0x14 ... long: 0xfe; 0xff = tap again to release) -* reg_23 +* reg_23:: tap make timeout? -* reg_24 +* reg_24:: tap release timeout? -* reg_25 +* reg_25:: smart edge cursor speed (0x02 = slow, 0x03 = medium, 0x04 = fast) -* reg_26 +* reg_26:: smart edge activation area width? -4.2 Native relative mode 4 byte packet format - ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Native relative mode 4 byte packet format +----------------------------------------- + +byte 0:: -byte 0: bit 7 6 5 4 3 2 1 0 c c p2 p1 1 M R L @@ -251,20 +246,23 @@ byte 0: p1..p2 = byte 1 and 2 odd parity bit c = 1 when corner tap detected -byte 1: +byte 1:: + bit 7 6 5 4 3 2 1 0 dx7 dx6 dx5 dx4 dx3 dx2 dx1 dx0 dx7..dx0 = x movement; positive = right, negative = left byte 1 = 0xf0 when corner tap detected -byte 2: +byte 2:: + bit 7 6 5 4 3 2 1 0 dy7 dy6 dy5 dy4 dy3 dy2 dy1 dy0 dy7..dy0 = y movement; positive = up, negative = down -byte 3: +byte 3:: + parity checking enabled (reg_11, P = 1): bit 7 6 5 4 3 2 1 0 @@ -296,14 +294,15 @@ byte 3: positive = down -4.3 Native absolute mode 4 byte packet format - ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Native absolute mode 4 byte packet format +----------------------------------------- EF013 and EF019 have a special behaviour (due to a bug in the firmware?), and when 1 finger is touching, the first 2 position reports must be discarded. This counting is reset whenever a different number of fingers is reported. -byte 0: +byte 0:: + firmware version 1.x: bit 7 6 5 4 3 2 1 0 @@ -322,7 +321,8 @@ byte 0: p1..p3 = byte 1..3 odd parity bit n1..n0 = number of fingers on touchpad -byte 1: +byte 1:: + firmware version 1.x: bit 7 6 5 4 3 2 1 0 @@ -337,65 +337,68 @@ byte 1: bit 7 6 5 4 3 2 1 0 . . . . x9 x8 y9 y8 -byte 2: +byte 2:: + bit 7 6 5 4 3 2 1 0 x7 x6 x5 x4 x3 x2 x1 x0 x9..x0 = absolute x value (horizontal) -byte 3: +byte 3:: + bit 7 6 5 4 3 2 1 0 y7 y6 y5 y4 y3 y2 y1 y0 y9..y0 = absolute y value (vertical) -///////////////////////////////////////////////////////////////////////////// - +Hardware version 2 +~~~~~~~~~~~~~~~~~~ -5. Hardware version 2 - ================== - -5.1 Registers - ~~~~~~~~~ +Registers +--------- By echoing a hexadecimal value to a register it contents can be altered. -For example: +For example:: echo -n 0x56 > reg_10 -* reg_10 +* reg_10:: bit 7 6 5 4 3 2 1 0 0 1 0 1 0 1 D 0 D: 1 = enable drag and drop -* reg_11 +* reg_11:: bit 7 6 5 4 3 2 1 0 1 0 0 0 S 0 1 0 S: 1 = enable vertical scroll -* reg_21 +* reg_21:: unknown (0x00) -* reg_22 +* reg_22:: drag and drop release time out (short: 0x70 ... long 0x7e; 0x7f = never i.e. tap again to release) -5.2 Native absolute mode 6 byte packet format - ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -5.2.1 Parity checking and packet re-synchronization +Native absolute mode 6 byte packet format +----------------------------------------- + +Parity checking and packet re-synchronization +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + There is no parity checking, however some consistency checks can be performed. -For instance for EF113: +For instance for EF113:: + SA1= packet[0]; A1 = packet[1]; B1 = packet[2]; @@ -410,7 +413,8 @@ For instance for EF113: (((SA1 & 0xC0) != 0x80) && (( C1 & 0xF0) != 0x00)) ) // check Byte 5 // error detected -For all the other ones, there are just a few constant bits: +For all the other ones, there are just a few constant bits:: + if( ((packet[0] & 0x0C) != 0x04) || ((packet[3] & 0x0f) != 0x02) ) // error detected @@ -418,10 +422,10 @@ For all the other ones, there are just a few constant bits: In case an error is detected, all the packets are shifted by one (and packet[0] is discarded). -5.2.2 One/Three finger touch - ~~~~~~~~~~~~~~~~ +One/Three finger touch +^^^^^^^^^^^^^^^^^^^^^^ -byte 0: +byte 0:: bit 7 6 5 4 3 2 1 0 n1 n0 w3 w2 . . R L @@ -429,19 +433,19 @@ byte 0: L, R = 1 when Left, Right mouse button pressed n1..n0 = number of fingers on touchpad -byte 1: +byte 1:: bit 7 6 5 4 3 2 1 0 p7 p6 p5 p4 x11 x10 x9 x8 -byte 2: +byte 2:: bit 7 6 5 4 3 2 1 0 x7 x6 x5 x4 x3 x2 x1 x0 x11..x0 = absolute x value (horizontal) -byte 3: +byte 3:: bit 7 6 5 4 3 2 1 0 n4 vf w1 w0 . . . b2 @@ -460,14 +464,14 @@ byte 3: 6 = Another one 7 = Another one -byte 4: +byte 4:: bit 7 6 5 4 3 2 1 0 p3 p1 p2 p0 y11 y10 y9 y8 p7..p0 = pressure (not EF113) -byte 5: +byte 5:: bit 7 6 5 4 3 2 1 0 y7 y6 y5 y4 y3 y2 y1 y0 @@ -475,15 +479,15 @@ byte 5: y11..y0 = absolute y value (vertical) -5.2.3 Two finger touch - ~~~~~~~~~~~~~~~~ +Two finger touch +^^^^^^^^^^^^^^^^ Note that the two pairs of coordinates are not exactly the coordinates of the two fingers, but only the pair of the lower-left and upper-right coordinates. So the actual fingers might be situated on the other diagonal of the square defined by these two points. -byte 0: +byte 0:: bit 7 6 5 4 3 2 1 0 n1 n0 ay8 ax8 . . R L @@ -491,47 +495,46 @@ byte 0: L, R = 1 when Left, Right mouse button pressed n1..n0 = number of fingers on touchpad -byte 1: +byte 1:: bit 7 6 5 4 3 2 1 0 ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0 ax8..ax0 = lower-left finger absolute x value -byte 2: +byte 2:: bit 7 6 5 4 3 2 1 0 ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 ay8..ay0 = lower-left finger absolute y value -byte 3: +byte 3:: bit 7 6 5 4 3 2 1 0 . . by8 bx8 . . . . -byte 4: +byte 4:: bit 7 6 5 4 3 2 1 0 bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0 bx8..bx0 = upper-right finger absolute x value -byte 5: +byte 5:: bit 7 6 5 4 3 2 1 0 by7 by8 by5 by4 by3 by2 by1 by0 by8..by0 = upper-right finger absolute y value -///////////////////////////////////////////////////////////////////////////// +Hardware version 3 +~~~~~~~~~~~~~~~~~~ -6. Hardware version 3 - ================== +Registers +--------- -6.1 Registers - ~~~~~~~~~ -* reg_10 +* reg_10:: bit 7 6 5 4 3 2 1 0 0 0 0 0 R F T A @@ -541,8 +544,9 @@ byte 5: F: 1 = disable ABS Position Filter R: 1 = enable real hardware resolution -6.2 Native absolute mode 6 byte packet format - ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Native absolute mode 6 byte packet format +----------------------------------------- + 1 and 3 finger touch shares the same 6-byte packet format, except that 3 finger touch only reports the position of the center of all three fingers. @@ -552,19 +556,21 @@ Note on debounce: In case the box has unstable power supply or other electricity issues, or when number of finger changes, F/W would send "debounce packet" to inform driver that the hardware is in debounce status. -The debouce packet has the following signature: +The debouce packet has the following signature:: + byte 0: 0xc4 byte 1: 0xff byte 2: 0xff byte 3: 0x02 byte 4: 0xff byte 5: 0xff + When we encounter this kind of packet, we just ignore it. -6.2.1 One/Three finger touch - ~~~~~~~~~~~~~~~~~~~~~~ +One/Three finger touch +^^^^^^^^^^^^^^^^^^^^^^ -byte 0: +byte 0:: bit 7 6 5 4 3 2 1 0 n1 n0 w3 w2 0 1 R L @@ -572,63 +578,63 @@ byte 0: L, R = 1 when Left, Right mouse button pressed n1..n0 = number of fingers on touchpad -byte 1: +byte 1:: bit 7 6 5 4 3 2 1 0 p7 p6 p5 p4 x11 x10 x9 x8 -byte 2: +byte 2:: bit 7 6 5 4 3 2 1 0 x7 x6 x5 x4 x3 x2 x1 x0 x11..x0 = absolute x value (horizontal) -byte 3: +byte 3:: bit 7 6 5 4 3 2 1 0 0 0 w1 w0 0 0 1 0 w3..w0 = width of the finger touch -byte 4: +byte 4:: bit 7 6 5 4 3 2 1 0 p3 p1 p2 p0 y11 y10 y9 y8 p7..p0 = pressure -byte 5: +byte 5:: bit 7 6 5 4 3 2 1 0 y7 y6 y5 y4 y3 y2 y1 y0 y11..y0 = absolute y value (vertical) -6.2.2 Two finger touch - ~~~~~~~~~~~~~~~~ +Two finger touch +^^^^^^^^^^^^^^^^ The packet format is exactly the same for two finger touch, except the hardware sends two 6 byte packets. The first packet contains data for the first finger, the second packet has data for the second finger. So for two finger touch a total of 12 bytes are sent. -///////////////////////////////////////////////////////////////////////////// +Hardware version 4 +~~~~~~~~~~~~~~~~~~ -7. Hardware version 4 - ================== +Registers +--------- -7.1 Registers - ~~~~~~~~~ -* reg_07 +* reg_07:: bit 7 6 5 4 3 2 1 0 0 0 0 0 0 0 0 A A: 1 = enable absolute tracking -7.2 Native absolute mode 6 byte packet format - ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Native absolute mode 6 byte packet format +----------------------------------------- + v4 hardware is a true multitouch touchpad, capable of tracking up to 5 fingers. Unfortunately, due to PS/2's limited bandwidth, its packet format is rather complex. @@ -647,45 +653,49 @@ position, until we receive a status packet. One exception is one finger touch. when a status packet tells us there is only one finger, the hardware would just send head packets afterwards. -7.2.1 Status packet - ~~~~~~~~~~~~~ +Status packet +^^^^^^^^^^^^^ -byte 0: +byte 0:: bit 7 6 5 4 3 2 1 0 . . . . 0 1 R L L, R = 1 when Left, Right mouse button pressed -byte 1: +byte 1:: bit 7 6 5 4 3 2 1 0 . . . ft4 ft3 ft2 ft1 ft0 ft4 ft3 ft2 ft1 ft0 ftn = 1 when finger n is on touchpad -byte 2: not used +byte 2:: + + not used -byte 3: +byte 3:: bit 7 6 5 4 3 2 1 0 . . . 1 0 0 0 0 constant bits -byte 4: +byte 4:: bit 7 6 5 4 3 2 1 0 p . . . . . . . p = 1 for palm -byte 5: not used +byte 5:: -7.2.2 Head packet - ~~~~~~~~~~~ + not used -byte 0: +Head packet +^^^^^^^^^^^ + +byte 0:: bit 7 6 5 4 3 2 1 0 w3 w2 w1 w0 0 1 R L @@ -693,43 +703,43 @@ byte 0: L, R = 1 when Left, Right mouse button pressed w3..w0 = finger width (spans how many trace lines) -byte 1: +byte 1:: bit 7 6 5 4 3 2 1 0 p7 p6 p5 p4 x11 x10 x9 x8 -byte 2: +byte 2:: bit 7 6 5 4 3 2 1 0 x7 x6 x5 x4 x3 x2 x1 x0 x11..x0 = absolute x value (horizontal) -byte 3: +byte 3:: bit 7 6 5 4 3 2 1 0 id2 id1 id0 1 0 0 0 1 id2..id0 = finger id -byte 4: +byte 4:: bit 7 6 5 4 3 2 1 0 p3 p1 p2 p0 y11 y10 y9 y8 p7..p0 = pressure -byte 5: +byte 5:: bit 7 6 5 4 3 2 1 0 y7 y6 y5 y4 y3 y2 y1 y0 y11..y0 = absolute y value (vertical) -7.2.3 Motion packet - ~~~~~~~~~~~~~ +Motion packet +^^^^^^^^^^^^^ -byte 0: +byte 0:: bit 7 6 5 4 3 2 1 0 id2 id1 id0 w 0 1 R L @@ -739,35 +749,35 @@ byte 0: w = 1 when delta overflows (> 127 or < -128), in this case firmware sends us (delta x / 5) and (delta y / 5) -byte 1: +byte 1:: bit 7 6 5 4 3 2 1 0 x7 x6 x5 x4 x3 x2 x1 x0 x7..x0 = delta x (two's complement) -byte 2: +byte 2:: bit 7 6 5 4 3 2 1 0 y7 y6 y5 y4 y3 y2 y1 y0 y7..y0 = delta y (two's complement) -byte 3: +byte 3:: bit 7 6 5 4 3 2 1 0 id2 id1 id0 1 0 0 1 0 id2..id0 = finger id -byte 4: +byte 4:: bit 7 6 5 4 3 2 1 0 x7 x6 x5 x4 x3 x2 x1 x0 x7..x0 = delta x (two's complement) -byte 5: +byte 5:: bit 7 6 5 4 3 2 1 0 y7 y6 y5 y4 y3 y2 y1 y0 @@ -778,33 +788,47 @@ byte 5: byte 3 ~ 5 for another -8. Trackpoint (for Hardware version 3 and 4) - ========================================= -8.1 Registers - ~~~~~~~~~ +Trackpoint (for Hardware version 3 and 4) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Registers +--------- + No special registers have been identified. -8.2 Native relative mode 6 byte packet format - ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -8.2.1 Status Packet - ~~~~~~~~~~~~~ +Native relative mode 6 byte packet format +----------------------------------------- + +Status Packet +^^^^^^^^^^^^^ + +byte 0:: -byte 0: bit 7 6 5 4 3 2 1 0 0 0 sx sy 0 M R L -byte 1: + +byte 1:: + bit 7 6 5 4 3 2 1 0 ~sx 0 0 0 0 0 0 0 -byte 2: + +byte 2:: + bit 7 6 5 4 3 2 1 0 ~sy 0 0 0 0 0 0 0 -byte 3: + +byte 3:: + bit 7 6 5 4 3 2 1 0 0 0 ~sy ~sx 0 1 1 0 -byte 4: + +byte 4:: + bit 7 6 5 4 3 2 1 0 x7 x6 x5 x4 x3 x2 x1 x0 -byte 5: + +byte 5:: + bit 7 6 5 4 3 2 1 0 y7 y6 y5 y4 y3 y2 y1 y0 diff --git a/Documentation/input/devices/gpio-tilt.rst b/Documentation/input/devices/gpio-tilt.rst new file mode 100644 index 000000000000..fa6e64570aa7 --- /dev/null +++ b/Documentation/input/devices/gpio-tilt.rst @@ -0,0 +1,103 @@ +Driver for tilt-switches connected via GPIOs +============================================ + +Generic driver to read data from tilt switches connected via gpios. +Orientation can be provided by one or more than one tilt switches, +i.e. each tilt switch providing one axis, and the number of axes +is also not limited. + + +Data structures +--------------- + +The array of struct gpio in the gpios field is used to list the gpios +that represent the current tilt state. + +The array of struct gpio_tilt_axis describes the axes that are reported +to the input system. The values set therein are used for the +input_set_abs_params calls needed to init the axes. + +The array of struct gpio_tilt_state maps gpio states to the corresponding +values to report. The gpio state is represented as a bitfield where the +bit-index corresponds to the index of the gpio in the struct gpio array. +In the same manner the values stored in the axes array correspond to +the elements of the gpio_tilt_axis-array. + + +Example +------- + +Example configuration for a single TS1003 tilt switch that rotates around +one axis in 4 steps and emits the current tilt via two GPIOs:: + + static int sg060_tilt_enable(struct device *dev) { + /* code to enable the sensors */ + }; + + static void sg060_tilt_disable(struct device *dev) { + /* code to disable the sensors */ + }; + + static struct gpio sg060_tilt_gpios[] = { + { SG060_TILT_GPIO_SENSOR1, GPIOF_IN, "tilt_sensor1" }, + { SG060_TILT_GPIO_SENSOR2, GPIOF_IN, "tilt_sensor2" }, + }; + + static struct gpio_tilt_state sg060_tilt_states[] = { + { + .gpios = (0 << 1) | (0 << 0), + .axes = (int[]) { + 0, + }, + }, { + .gpios = (0 << 1) | (1 << 0), + .axes = (int[]) { + 1, /* 90 degrees */ + }, + }, { + .gpios = (1 << 1) | (1 << 0), + .axes = (int[]) { + 2, /* 180 degrees */ + }, + }, { + .gpios = (1 << 1) | (0 << 0), + .axes = (int[]) { + 3, /* 270 degrees */ + }, + }, + }; + + static struct gpio_tilt_axis sg060_tilt_axes[] = { + { + .axis = ABS_RY, + .min = 0, + .max = 3, + .fuzz = 0, + .flat = 0, + }, + }; + + static struct gpio_tilt_platform_data sg060_tilt_pdata= { + .gpios = sg060_tilt_gpios, + .nr_gpios = ARRAY_SIZE(sg060_tilt_gpios), + + .axes = sg060_tilt_axes, + .nr_axes = ARRAY_SIZE(sg060_tilt_axes), + + .states = sg060_tilt_states, + .nr_states = ARRAY_SIZE(sg060_tilt_states), + + .debounce_interval = 100, + + .poll_interval = 1000, + .enable = sg060_tilt_enable, + .disable = sg060_tilt_disable, + }; + + static struct platform_device sg060_device_tilt = { + .name = "gpio-tilt-polled", + .id = -1, + .dev = { + .platform_data = &sg060_tilt_pdata, + }, + }; diff --git a/Documentation/input/devices/iforce-protocol.rst b/Documentation/input/devices/iforce-protocol.rst new file mode 100644 index 000000000000..8634beac3fdb --- /dev/null +++ b/Documentation/input/devices/iforce-protocol.rst @@ -0,0 +1,381 @@ +=============== +Iforce Protocol +=============== + +:Author: Johann Deneux <johann.deneux@gmail.com> + +Home page at `<http://web.archive.org/web/*/http://www.esil.univ-mrs.fr>`_ + +:Additions: by Vojtech Pavlik. + + +Introduction +============ + +This document describes what I managed to discover about the protocol used to +specify force effects to I-Force 2.0 devices. None of this information comes +from Immerse. That's why you should not trust what is written in this +document. This document is intended to help understanding the protocol. +This is not a reference. Comments and corrections are welcome. To contact me, +send an email to: johann.deneux@gmail.com + +.. warning:: + + I shall not be held responsible for any damage or harm caused if you try to + send data to your I-Force device based on what you read in this document. + +Preliminary Notes +================= + +All values are hexadecimal with big-endian encoding (msb on the left). Beware, +values inside packets are encoded using little-endian. Bytes whose roles are +unknown are marked ??? Information that needs deeper inspection is marked (?) + +General form of a packet +------------------------ + +This is how packets look when the device uses the rs232 to communicate. + +== == === ==== == +2B OP LEN DATA CS +== == === ==== == + +CS is the checksum. It is equal to the exclusive or of all bytes. + +When using USB: + +== ==== +OP DATA +== ==== + +The 2B, LEN and CS fields have disappeared, probably because USB handles +frames and data corruption is handled or unsignificant. + +First, I describe effects that are sent by the device to the computer + +Device input state +================== + +This packet is used to indicate the state of each button and the value of each +axis:: + + OP= 01 for a joystick, 03 for a wheel + LEN= Varies from device to device + 00 X-Axis lsb + 01 X-Axis msb + 02 Y-Axis lsb, or gas pedal for a wheel + 03 Y-Axis msb, or brake pedal for a wheel + 04 Throttle + 05 Buttons + 06 Lower 4 bits: Buttons + Upper 4 bits: Hat + 07 Rudder + +Device effects states +===================== + +:: + + OP= 02 + LEN= Varies + 00 ? Bit 1 (Value 2) is the value of the deadman switch + 01 Bit 8 is set if the effect is playing. Bits 0 to 7 are the effect id. + 02 ?? + 03 Address of parameter block changed (lsb) + 04 Address of parameter block changed (msb) + 05 Address of second parameter block changed (lsb) + ... depending on the number of parameter blocks updated + +Force effect +------------ + +:: + + OP= 01 + LEN= 0e + 00 Channel (when playing several effects at the same time, each must + be assigned a channel) + 01 Wave form + Val 00 Constant + Val 20 Square + Val 21 Triangle + Val 22 Sine + Val 23 Sawtooth up + Val 24 Sawtooth down + Val 40 Spring (Force = f(pos)) + Val 41 Friction (Force = f(velocity)) and Inertia + (Force = f(acceleration)) + + + 02 Axes affected and trigger + Bits 4-7: Val 2 = effect along one axis. Byte 05 indicates direction + Val 4 = X axis only. Byte 05 must contain 5a + Val 8 = Y axis only. Byte 05 must contain b4 + Val c = X and Y axes. Bytes 05 must contain 60 + Bits 0-3: Val 0 = No trigger + Val x+1 = Button x triggers the effect + When the whole byte is 0, cancel the previously set trigger + + 03-04 Duration of effect (little endian encoding, in ms) + + 05 Direction of effect, if applicable. Else, see 02 for value to assign. + + 06-07 Minimum time between triggering. + + 08-09 Address of periodicity or magnitude parameters + 0a-0b Address of attack and fade parameters, or ffff if none. + *or* + 08-09 Address of interactive parameters for X-axis, + or ffff if not applicable + 0a-0b Address of interactive parameters for Y-axis, + or ffff if not applicable + + 0c-0d Delay before execution of effect (little endian encoding, in ms) + + +Time based parameters +--------------------- + +Attack and fade +^^^^^^^^^^^^^^^ + +:: + + OP= 02 + LEN= 08 + 00-01 Address where to store the parameters + 02-03 Duration of attack (little endian encoding, in ms) + 04 Level at end of attack. Signed byte. + 05-06 Duration of fade. + 07 Level at end of fade. + +Magnitude +^^^^^^^^^ + +:: + + OP= 03 + LEN= 03 + 00-01 Address + 02 Level. Signed byte. + +Periodicity +^^^^^^^^^^^ + +:: + + OP= 04 + LEN= 07 + 00-01 Address + 02 Magnitude. Signed byte. + 03 Offset. Signed byte. + 04 Phase. Val 00 = 0 deg, Val 40 = 90 degs. + 05-06 Period (little endian encoding, in ms) + +Interactive parameters +---------------------- + +:: + + OP= 05 + LEN= 0a + 00-01 Address + 02 Positive Coeff + 03 Negative Coeff + 04+05 Offset (center) + 06+07 Dead band (Val 01F4 = 5000 (decimal)) + 08 Positive saturation (Val 0a = 1000 (decimal) Val 64 = 10000 (decimal)) + 09 Negative saturation + +The encoding is a bit funny here: For coeffs, these are signed values. The +maximum value is 64 (100 decimal), the min is 9c. +For the offset, the minimum value is FE0C, the maximum value is 01F4. +For the deadband, the minimum value is 0, the max is 03E8. + +Controls +-------- + +:: + + OP= 41 + LEN= 03 + 00 Channel + 01 Start/Stop + Val 00: Stop + Val 01: Start and play once. + Val 41: Start and play n times (See byte 02 below) + 02 Number of iterations n. + +Init +---- + + +Querying features +^^^^^^^^^^^^^^^^^ +:: + + OP= ff + Query command. Length varies according to the query type. + The general format of this packet is: + ff 01 QUERY [INDEX] CHECKSUM + responses are of the same form: + FF LEN QUERY VALUE_QUERIED CHECKSUM2 + where LEN = 1 + length(VALUE_QUERIED) + +Query ram size +~~~~~~~~~~~~~~ + +:: + + QUERY = 42 ('B'uffer size) + +The device should reply with the same packet plus two additional bytes +containing the size of the memory: +ff 03 42 03 e8 CS would mean that the device has 1000 bytes of ram available. + +Query number of effects +~~~~~~~~~~~~~~~~~~~~~~~ + +:: + + QUERY = 4e ('N'umber of effects) + +The device should respond by sending the number of effects that can be played +at the same time (one byte) +ff 02 4e 14 CS would stand for 20 effects. + +Vendor's id +~~~~~~~~~~~ + +:: + + QUERY = 4d ('M'anufacturer) + +Query the vendors'id (2 bytes) + +Product id +~~~~~~~~~~ + +:: + + QUERY = 50 ('P'roduct) + +Query the product id (2 bytes) + +Open device +~~~~~~~~~~~ + +:: + + QUERY = 4f ('O'pen) + +No data returned. + +Close device +~~~~~~~~~~~~ + +:: + + QUERY = 43 ('C')lose + +No data returned. + +Query effect +~~~~~~~~~~~~ + +:: + + QUERY = 45 ('E') + +Send effect type. +Returns nonzero if supported (2 bytes) + +Firmware Version +~~~~~~~~~~~~~~~~ + +:: + + QUERY = 56 ('V'ersion) + +Sends back 3 bytes - major, minor, subminor + +Initialisation of the device +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Set Control +~~~~~~~~~~~ + +.. note:: + Device dependent, can be different on different models! + +:: + + OP= 40 <idx> <val> [<val>] + LEN= 2 or 3 + 00 Idx + Idx 00 Set dead zone (0..2048) + Idx 01 Ignore Deadman sensor (0..1) + Idx 02 Enable comm watchdog (0..1) + Idx 03 Set the strength of the spring (0..100) + Idx 04 Enable or disable the spring (0/1) + Idx 05 Set axis saturation threshold (0..2048) + +Set Effect State +~~~~~~~~~~~~~~~~ + +:: + + OP= 42 <val> + LEN= 1 + 00 State + Bit 3 Pause force feedback + Bit 2 Enable force feedback + Bit 0 Stop all effects + +Set overall +~~~~~~~~~~~ + +:: + + OP= 43 <val> + LEN= 1 + 00 Gain + Val 00 = 0% + Val 40 = 50% + Val 80 = 100% + +Parameter memory +---------------- + +Each device has a certain amount of memory to store parameters of effects. +The amount of RAM may vary, I encountered values from 200 to 1000 bytes. Below +is the amount of memory apparently needed for every set of parameters: + + - period : 0c + - magnitude : 02 + - attack and fade : 0e + - interactive : 08 + +Appendix: How to study the protocol? +==================================== + +1. Generate effects using the force editor provided with the DirectX SDK, or +use Immersion Studio (freely available at their web site in the developer section: +www.immersion.com) +2. Start a soft spying RS232 or USB (depending on where you connected your +joystick/wheel). I used ComPortSpy from fCoder (alpha version!) +3. Play the effect, and watch what happens on the spy screen. + +A few words about ComPortSpy: +At first glance, this software seems, hum, well... buggy. In fact, data appear with a +few seconds latency. Personally, I restart it every time I play an effect. +Remember it's free (as in free beer) and alpha! + +URLS +==== + +Check http://www.immerse.com for Immersion Studio, +and http://www.fcoder.com for ComPortSpy. + + +I-Force is trademark of Immersion Corp. diff --git a/Documentation/input/devices/index.rst b/Documentation/input/devices/index.rst new file mode 100644 index 000000000000..95a453782bad --- /dev/null +++ b/Documentation/input/devices/index.rst @@ -0,0 +1,19 @@ +Driver-specific documentation +============================= + +This section provides information about various devices supported by the +Linux kernel, their protocols, and driver details. + +.. toctree:: + :maxdepth: 2 + :numbered: + :glob: + + * + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/input/devices/joystick-parport.rst b/Documentation/input/devices/joystick-parport.rst new file mode 100644 index 000000000000..e8ce16ee799a --- /dev/null +++ b/Documentation/input/devices/joystick-parport.rst @@ -0,0 +1,611 @@ +.. include:: <isonum.txt> + +.. _joystick-parport: + +============================== +Parallel Port Joystick Drivers +============================== + +:Copyright: |copy| 1998-2000 Vojtech Pavlik <vojtech@ucw.cz> +:Copyright: |copy| 1998 Andree Borrmann <a.borrmann@tu-bs.de> + + +Sponsored by SuSE + +Disclaimer +========== + +Any information in this file is provided as-is, without any guarantee that +it will be true. So, use it at your own risk. The possible damages that can +happen include burning your parallel port, and/or the sticks and joystick +and maybe even more. Like when a lightning kills you it is not our problem. + +Introduction +============ + +The joystick parport drivers are used for joysticks and gamepads not +originally designed for PCs and other computers Linux runs on. Because of +that, PCs usually lack the right ports to connect these devices to. Parallel +port, because of its ability to change single bits at will, and providing +both output and input bits is the most suitable port on the PC for +connecting such devices. + +Devices supported +================= + +Many console and 8-bit computer gamepads and joysticks are supported. The +following subsections discuss usage of each. + +NES and SNES +------------ + +The Nintendo Entertainment System and Super Nintendo Entertainment System +gamepads are widely available, and easy to get. Also, they are quite easy to +connect to a PC, and don't need much processing speed (108 us for NES and +165 us for SNES, compared to about 1000 us for PC gamepads) to communicate +with them. + +All NES and SNES use the same synchronous serial protocol, clocked from +the computer's side (and thus timing insensitive). To allow up to 5 NES +and/or SNES gamepads and/or SNES mice connected to the parallel port at once, +the output lines of the parallel port are shared, while one of 5 available +input lines is assigned to each gamepad. + +This protocol is handled by the gamecon.c driver, so that's the one +you'll use for NES, SNES gamepads and SNES mice. + +The main problem with PC parallel ports is that they don't have +5V power +source on any of their pins. So, if you want a reliable source of power +for your pads, use either keyboard or joystick port, and make a pass-through +cable. You can also pull the power directly from the power supply (the red +wire is +5V). + +If you want to use the parallel port only, you can take the power is from +some data pin. For most gamepad and parport implementations only one pin is +needed, and I'd recommend pin 9 for that, the highest data bit. On the other +hand, if you are not planning to use anything else than NES / SNES on the +port, anything between and including pin 4 and pin 9 will work:: + + (pin 9) -----> Power + +Unfortunately, there are pads that need a lot more of power, and parallel +ports that can't give much current through the data pins. If this is your +case, you'll need to use diodes (as a prevention of destroying your parallel +port), and combine the currents of two or more data bits together:: + + Diodes + (pin 9) ----|>|-------+------> Power + | + (pin 8) ----|>|-------+ + | + (pin 7) ----|>|-------+ + | + <and so on> : + | + (pin 4) ----|>|-------+ + +Ground is quite easy. On PC's parallel port the ground is on any of the +pins from pin 18 to pin 25. So use any pin of these you like for the ground:: + + (pin 18) -----> Ground + +NES and SNES pads have two input bits, Clock and Latch, which drive the +serial transfer. These are connected to pins 2 and 3 of the parallel port, +respectively:: + + (pin 2) -----> Clock + (pin 3) -----> Latch + +And the last thing is the NES / SNES data wire. Only that isn't shared and +each pad needs its own data pin. The parallel port pins are:: + + (pin 10) -----> Pad 1 data + (pin 11) -----> Pad 2 data + (pin 12) -----> Pad 3 data + (pin 13) -----> Pad 4 data + (pin 15) -----> Pad 5 data + +Note that pin 14 is not used, since it is not an input pin on the parallel +port. + +This is everything you need on the PC's side of the connection, now on to +the gamepads side. The NES and SNES have different connectors. Also, there +are quite a lot of NES clones, and because Nintendo used proprietary +connectors for their machines, the cloners couldn't and used standard D-Cannon +connectors. Anyway, if you've got a gamepad, and it has buttons A, B, Turbo +A, Turbo B, Select and Start, and is connected through 5 wires, then it is +either a NES or NES clone and will work with this connection. SNES gamepads +also use 5 wires, but have more buttons. They will work as well, of course:: + + Pinout for NES gamepads Pinout for SNES gamepads and mice + + +----> Power +-----------------------\ + | 7 | o o o o | x x o | 1 + 5 +---------+ 7 +-----------------------/ + | x x o \ | | | | | + | o o o o | | | | | +-> Ground + 4 +------------+ 1 | | | +------------> Data + | | | | | | +---------------> Latch + | | | +-> Ground | +------------------> Clock + | | +----> Clock +---------------------> Power + | +-------> Latch + +----------> Data + + Pinout for NES clone (db9) gamepads Pinout for NES clone (db15) gamepads + + +---------> Clock +-----------------> Data + | +-------> Latch | +---> Ground + | | +-----> Data | | + | | | ___________________ + _____________ 8 \ o x x x x x x o / 1 + 5 \ x o o o x / 1 \ o x x o x x o / + \ x o x o / 15 `~~~~~~~~~~~~~' 9 + 9 `~~~~~~~' 6 | | | + | | | | +----> Clock + | +----> Power | +----------> Latch + +--------> Ground +----------------> Power + +Multisystem joysticks +--------------------- + +In the era of 8-bit machines, there was something like de-facto standard +for joystick ports. They were all digital, and all used D-Cannon 9 pin +connectors (db9). Because of that, a single joystick could be used without +hassle on Atari (130, 800XE, 800XL, 2600, 7200), Amiga, Commodore C64, +Amstrad CPC, Sinclair ZX Spectrum and many other machines. That's why these +joysticks are called "Multisystem". + +Now their pinout:: + + +---------> Right + | +-------> Left + | | +-----> Down + | | | +---> Up + | | | | + _____________ + 5 \ x o o o o / 1 + \ x o x o / + 9 `~~~~~~~' 6 + | | + | +----> Button + +--------> Ground + +However, as time passed, extensions to this standard developed, and these +were not compatible with each other:: + + + Atari 130, 800/XL/XE MSX + + +-----------> Power + +---------> Right | +---------> Right + | +-------> Left | | +-------> Left + | | +-----> Down | | | +-----> Down + | | | +---> Up | | | | +---> Up + | | | | | | | | | + _____________ _____________ + 5 \ x o o o o / 1 5 \ o o o o o / 1 + \ x o o o / \ o o o o / + 9 `~~~~~~~' 6 9 `~~~~~~~' 6 + | | | | | | | + | | +----> Button | | | +----> Button 1 + | +------> Power | | +------> Button 2 + +--------> Ground | +--------> Output 3 + +----------> Ground + + Amstrad CPC Commodore C64 + + +-----------> Analog Y + +---------> Right | +---------> Right + | +-------> Left | | +-------> Left + | | +-----> Down | | | +-----> Down + | | | +---> Up | | | | +---> Up + | | | | | | | | | + _____________ _____________ + 5 \ x o o o o / 1 5 \ o o o o o / 1 + \ x o o o / \ o o o o / + 9 `~~~~~~~' 6 9 `~~~~~~~' 6 + | | | | | | | + | | +----> Button 1 | | | +----> Button + | +------> Button 2 | | +------> Power + +--------> Ground | +--------> Ground + +----------> Analog X + + Sinclair Spectrum +2A/+3 Amiga 1200 + + +-----------> Up +-----------> Button 3 + | +---------> Fire | +---------> Right + | | | | +-------> Left + | | +-----> Ground | | | +-----> Down + | | | | | | | +---> Up + | | | | | | | | + _____________ _____________ + 5 \ o o x o x / 1 5 \ o o o o o / 1 + \ o o o o / \ o o o o / + 9 `~~~~~~~' 6 9 `~~~~~~~' 6 + | | | | | | | | + | | | +----> Right | | | +----> Button 1 + | | +------> Left | | +------> Power + | +--------> Ground | +--------> Ground + +----------> Down +----------> Button 2 + + And there were many others. + +Multisystem joysticks using db9.c +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +For the Multisystem joysticks, and their derivatives, the db9.c driver +was written. It allows only one joystick / gamepad per parallel port, but +the interface is easy to build and works with almost anything. + +For the basic 1-button Multisystem joystick you connect its wires to the +parallel port like this:: + + (pin 1) -----> Power + (pin 18) -----> Ground + + (pin 2) -----> Up + (pin 3) -----> Down + (pin 4) -----> Left + (pin 5) -----> Right + (pin 6) -----> Button 1 + +However, if the joystick is switch based (eg. clicks when you move it), +you might or might not, depending on your parallel port, need 10 kOhm pullup +resistors on each of the direction and button signals, like this:: + + (pin 2) ------------+------> Up + Resistor | + (pin 1) --[10kOhm]--+ + +Try without, and if it doesn't work, add them. For TTL based joysticks / +gamepads the pullups are not needed. + +For joysticks with two buttons you connect the second button to pin 7 on +the parallel port:: + + (pin 7) -----> Button 2 + +And that's it. + +On a side note, if you have already built a different adapter for use with +the digital joystick driver 0.8.0.2, this is also supported by the db9.c +driver, as device type 8. (See section 3.2) + +Multisystem joysticks using gamecon.c +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +For some people just one joystick per parallel port is not enough, and/or +want to use them on one parallel port together with NES/SNES/PSX pads. This is +possible using the gamecon.c. It supports up to 5 devices of the above types, +including 1 and 2 buttons Multisystem joysticks. + +However, there is nothing for free. To allow more sticks to be used at +once, you need the sticks to be purely switch based (that is non-TTL), and +not to need power. Just a plain simple six switches inside. If your +joystick can do more (eg. turbofire) you'll need to disable it totally first +if you want to use gamecon.c. + +Also, the connection is a bit more complex. You'll need a bunch of diodes, +and one pullup resistor. First, you connect the Directions and the button +the same as for db9, however with the diodes between:: + + Diodes + (pin 2) -----|<|----> Up + (pin 3) -----|<|----> Down + (pin 4) -----|<|----> Left + (pin 5) -----|<|----> Right + (pin 6) -----|<|----> Button 1 + +For two button sticks you also connect the other button:: + + (pin 7) -----|<|----> Button 2 + +And finally, you connect the Ground wire of the joystick, like done in +this little schematic to Power and Data on the parallel port, as described +for the NES / SNES pads in section 2.1 of this file - that is, one data pin +for each joystick. The power source is shared:: + + Data ------------+-----> Ground + Resistor | + Power --[10kOhm]--+ + +And that's all, here we go! + +Multisystem joysticks using turbografx.c +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The TurboGraFX interface, designed by + + Steffen Schwenke <schwenke@burg-halle.de> + +allows up to 7 Multisystem joysticks connected to the parallel port. In +Steffen's version, there is support for up to 5 buttons per joystick. However, +since this doesn't work reliably on all parallel ports, the turbografx.c driver +supports only one button per joystick. For more information on how to build the +interface, see: + + http://www2.burg-halle.de/~schwenke/parport.html + +Sony Playstation +---------------- + +The PSX controller is supported by the gamecon.c. Pinout of the PSX +controller (compatible with DirectPadPro):: + + +---------+---------+---------+ + 9 | o o o | o o o | o o o | 1 parallel + \________|_________|________/ port pins + | | | | | | + | | | | | +--------> Clock --- (4) + | | | | +------------> Select --- (3) + | | | +---------------> Power --- (5-9) + | | +------------------> Ground --- (18-25) + | +-------------------------> Command --- (2) + +----------------------------> Data --- (one of 10,11,12,13,15) + +The driver supports these controllers: + + * Standard PSX Pad + * NegCon PSX Pad + * Analog PSX Pad (red mode) + * Analog PSX Pad (green mode) + * PSX Rumble Pad + * PSX DDR Pad + +Sega +---- + +All the Sega controllers are more or less based on the standard 2-button +Multisystem joystick. However, since they don't use switches and use TTL +logic, the only driver usable with them is the db9.c driver. + +Sega Master System +~~~~~~~~~~~~~~~~~~ + +The SMS gamepads are almost exactly the same as normal 2-button +Multisystem joysticks. Set the driver to Multi2 mode, use the corresponding +parallel port pins, and the following schematic:: + + +-----------> Power + | +---------> Right + | | +-------> Left + | | | +-----> Down + | | | | +---> Up + | | | | | + _____________ + 5 \ o o o o o / 1 + \ o o x o / + 9 `~~~~~~~' 6 + | | | + | | +----> Button 1 + | +--------> Ground + +----------> Button 2 + +Sega Genesis aka MegaDrive +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The Sega Genesis (in Europe sold as Sega MegaDrive) pads are an extension +to the Sega Master System pads. They use more buttons (3+1, 5+1, 6+1). Use +the following schematic:: + + +-----------> Power + | +---------> Right + | | +-------> Left + | | | +-----> Down + | | | | +---> Up + | | | | | + _____________ + 5 \ o o o o o / 1 + \ o o o o / + 9 `~~~~~~~' 6 + | | | | + | | | +----> Button 1 + | | +------> Select + | +--------> Ground + +----------> Button 2 + +The Select pin goes to pin 14 on the parallel port:: + + (pin 14) -----> Select + +The rest is the same as for Multi2 joysticks using db9.c + +Sega Saturn +~~~~~~~~~~~ + +Sega Saturn has eight buttons, and to transfer that, without hacks like +Genesis 6 pads use, it needs one more select pin. Anyway, it is still +handled by the db9.c driver. Its pinout is very different from anything +else. Use this schematic:: + + +-----------> Select 1 + | +---------> Power + | | +-------> Up + | | | +-----> Down + | | | | +---> Ground + | | | | | + _____________ + 5 \ o o o o o / 1 + \ o o o o / + 9 `~~~~~~~' 6 + | | | | + | | | +----> Select 2 + | | +------> Right + | +--------> Left + +----------> Power + +Select 1 is pin 14 on the parallel port, Select 2 is pin 16 on the +parallel port:: + + (pin 14) -----> Select 1 + (pin 16) -----> Select 2 + +The other pins (Up, Down, Right, Left, Power, Ground) are the same as for +Multi joysticks using db9.c + +Amiga CD32 +---------- + +Amiga CD32 joypad uses the following pinout:: + + +-----------> Button 3 + | +---------> Right + | | +-------> Left + | | | +-----> Down + | | | | +---> Up + | | | | | + _____________ + 5 \ o o o o o / 1 + \ o o o o / + 9 `~~~~~~~' 6 + | | | | + | | | +----> Button 1 + | | +------> Power + | +--------> Ground + +----------> Button 2 + +It can be connected to the parallel port and driven by db9.c driver. It needs the following wiring: + + ============ ============= + CD32 pad Parallel port + ============ ============= + 1 (Up) 2 (D0) + 2 (Down) 3 (D1) + 3 (Left) 4 (D2) + 4 (Right) 5 (D3) + 5 (Button 3) 14 (AUTOFD) + 6 (Button 1) 17 (SELIN) + 7 (+5V) 1 (STROBE) + 8 (Gnd) 18 (Gnd) + 9 (Button 2) 7 (D5) + ============ ============= + +The drivers +=========== + +There are three drivers for the parallel port interfaces. Each, as +described above, allows to connect a different group of joysticks and pads. +Here are described their command lines: + +gamecon.c +--------- + +Using gamecon.c you can connect up to five devices to one parallel port. It +uses the following kernel/module command line:: + + gamecon.map=port,pad1,pad2,pad3,pad4,pad5 + +Where ``port`` the number of the parport interface (eg. 0 for parport0). + +And ``pad1`` to ``pad5`` are pad types connected to different data input pins +(10,11,12,13,15), as described in section 2.1 of this file. + +The types are: + + ===== ============================= + Type Joystick/Pad + ===== ============================= + 0 None + 1 SNES pad + 2 NES pad + 4 Multisystem 1-button joystick + 5 Multisystem 2-button joystick + 6 N64 pad + 7 Sony PSX controller + 8 Sony PSX DDR controller + 9 SNES mouse + ===== ============================= + +The exact type of the PSX controller type is autoprobed when used, so +hot swapping should work (but is not recommended). + +Should you want to use more than one of parallel ports at once, you can use +gamecon.map2 and gamecon.map3 as additional command line parameters for two +more parallel ports. + +There are two options specific to PSX driver portion. gamecon.psx_delay sets +the command delay when talking to the controllers. The default of 25 should +work but you can try lowering it for better performance. If your pads don't +respond try raising it until they work. Setting the type to 8 allows the +driver to be used with Dance Dance Revolution or similar games. Arrow keys are +registered as key presses instead of X and Y axes. + +db9.c +----- + +Apart from making an interface, there is nothing difficult on using the +db9.c driver. It uses the following kernel/module command line:: + + db9.dev=port,type + +Where ``port`` is the number of the parport interface (eg. 0 for parport0). + +Caveat here: This driver only works on bidirectional parallel ports. If +your parallel port is recent enough, you should have no trouble with this. +Old parallel ports may not have this feature. + +``Type`` is the type of joystick or pad attached: + + ===== ====================================================== + Type Joystick/Pad + ===== ====================================================== + 0 None + 1 Multisystem 1-button joystick + 2 Multisystem 2-button joystick + 3 Genesis pad (3+1 buttons) + 5 Genesis pad (5+1 buttons) + 6 Genesis pad (6+2 buttons) + 7 Saturn pad (8 buttons) + 8 Multisystem 1-button joystick (v0.8.0.2 pin-out) + 9 Two Multisystem 1-button joysticks (v0.8.0.2 pin-out) + 10 Amiga CD32 pad + ===== ====================================================== + +Should you want to use more than one of these joysticks/pads at once, you +can use db9.dev2 and db9.dev3 as additional command line parameters for two +more joysticks/pads. + +turbografx.c +------------ + +The turbografx.c driver uses a very simple kernel/module command line:: + + turbografx.map=port,js1,js2,js3,js4,js5,js6,js7 + +Where ``port`` is the number of the parport interface (eg. 0 for parport0). + +``jsX`` is the number of buttons the Multisystem joysticks connected to the +interface ports 1-7 have. For a standard multisystem joystick, this is 1. + +Should you want to use more than one of these interfaces at once, you can +use turbografx.map2 and turbografx.map3 as additional command line parameters +for two more interfaces. + +PC parallel port pinout +======================= + +:: + + .----------------------------------------. + At the PC: \ 13 12 11 10 9 8 7 6 5 4 3 2 1 / + \ 25 24 23 22 21 20 19 18 17 16 15 14 / + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +====== ======= ============= + Pin Name Description +====== ======= ============= + 1 /STROBE Strobe + 2-9 D0-D7 Data Bit 0-7 + 10 /ACK Acknowledge + 11 BUSY Busy + 12 PE Paper End + 13 SELIN Select In + 14 /AUTOFD Autofeed + 15 /ERROR Error + 16 /INIT Initialize + 17 /SEL Select + 18-25 GND Signal Ground +====== ======= ============= + + +That's all, folks! Have fun! diff --git a/Documentation/input/ntrig.txt b/Documentation/input/devices/ntrig.rst index be1fd981f73f..a6b22ce6c61c 100644 --- a/Documentation/input/ntrig.txt +++ b/Documentation/input/devices/ntrig.rst @@ -1,7 +1,11 @@ +.. include:: <isonum.txt> + +========================= N-Trig touchscreen Driver -------------------------- - Copyright (c) 2008-2010 Rafi Rubin <rafi@seas.upenn.edu> - Copyright (c) 2009-2010 Stephane Chatty +========================= + +:Copyright: |copy| 2008-2010 Rafi Rubin <rafi@seas.upenn.edu> +:Copyright: |copy| 2009-2010 Stephane Chatty This driver provides support for N-Trig pen and multi-touch sensors. Single and multi-touch events are translated to the appropriate protocols for @@ -22,16 +26,18 @@ but only for that one device. The following parameters are used to configure filters to reduce noise: -activate_slack number of fingers to ignore before processing events - -activation_height size threshold to activate immediately -activation_width - -min_height size threshold bellow which fingers are ignored -min_width both to decide activation and during activity - -deactivate_slack the number of "no contact" frames to ignore before - propagating the end of activity events ++-----------------------+-----------------------------------------------------+ +|activate_slack |number of fingers to ignore before processing events | ++-----------------------+-----------------------------------------------------+ +|activation_height, |size threshold to activate immediately | +|activation_width | | ++-----------------------+-----------------------------------------------------+ +|min_height, |size threshold bellow which fingers are ignored | +|min_width |both to decide activation and during activity | ++-----------------------+-----------------------------------------------------+ +|deactivate_slack |the number of "no contact" frames to ignore before | +| |propagating the end of activity events | ++-----------------------+-----------------------------------------------------+ When the last finger is removed from the device, it sends a number of empty frames. By holding off on deactivation for a few frames we can tolerate false @@ -44,15 +50,20 @@ Additional sysfs items ---------------------- These nodes just provide easy access to the ranges reported by the device. -sensor_logical_height the range for positions reported during activity -sensor_logical_width -sensor_physical_height internal ranges not used for normal events but -sensor_physical_width useful for tuning ++-----------------------+-----------------------------------------------------+ +|sensor_logical_height, | the range for positions reported during activity | +|sensor_logical_width | | ++-----------------------+-----------------------------------------------------+ +|sensor_physical_height,| internal ranges not used for normal events but | +|sensor_physical_width | useful for tuning | ++-----------------------+-----------------------------------------------------+ All N-Trig devices with product id of 1 report events in the ranges of -X: 0-9600 -Y: 0-7200 + +* X: 0-9600 +* Y: 0-7200 + However not all of these devices have the same physical dimensions. Most seem to be 12" sensors (Dell Latitude XT and XT2 and the HP TX2), and at least one model (Dell Studio 17) has a 17" sensor. The ratio of physical diff --git a/Documentation/input/rotary-encoder.txt b/Documentation/input/devices/rotary-encoder.rst index 46a74f0c551a..b07b20a295ac 100644 --- a/Documentation/input/rotary-encoder.txt +++ b/Documentation/input/devices/rotary-encoder.rst @@ -1,8 +1,11 @@ +============================================================ rotary-encoder - a generic driver for GPIO connected devices -Daniel Mack <daniel@caiaq.de>, Feb 2009 +============================================================ -0. Function ------------ +:Author: Daniel Mack <daniel@caiaq.de>, Feb 2009 + +Function +-------- Rotary encoders are devices which are connected to the CPU or other peripherals with two wires. The outputs are phase-shifted by 90 degrees @@ -13,7 +16,7 @@ Some encoders have both outputs low in stable states, others also have a stable state with both outputs high (half-period mode) and some have a stable state in all steps (quarter-period mode). -The phase diagram of these two outputs look like this: +The phase diagram of these two outputs look like this:: _____ _____ _____ | | | | | | @@ -40,8 +43,8 @@ For more information, please see https://en.wikipedia.org/wiki/Rotary_encoder -1. Events / state machine -------------------------- +Events / state machine +---------------------- In half-period mode, state a) and c) above are used to determine the rotational direction based on the last stable state. Events are reported in @@ -65,62 +68,64 @@ d) Falling edge on channel B, channel A in low state should have happened, unless it flipped back on half the way. The 'armed' state tells us about that. -2. Platform requirements ------------------------- +Platform requirements +--------------------- As there is no hardware dependent call in this driver, the platform it is used with must support gpiolib. Another requirement is that IRQs must be able to fire on both edges. -3. Board integration --------------------- +Board integration +----------------- To use this driver in your system, register a platform_device with the name 'rotary-encoder' and associate the IRQs and some specific platform -data with it. - -struct rotary_encoder_platform_data is declared in -include/linux/rotary-encoder.h and needs to be filled with the number of -steps the encoder has and can carry information about externally inverted -signals (because of an inverting buffer or other reasons). The encoder -can be set up to deliver input information as either an absolute or relative -axes. For relative axes the input event returns +/-1 for each step. For -absolute axes the position of the encoder can either roll over between zero -and the number of steps or will clamp at the maximum and zero depending on -the configuration. - -Because GPIO to IRQ mapping is platform specific, this information must -be given in separately to the driver. See the example below. - ----------<snip>--------- - -/* board support file example */ - -#include <linux/input.h> -#include <linux/rotary_encoder.h> - -#define GPIO_ROTARY_A 1 -#define GPIO_ROTARY_B 2 - -static struct rotary_encoder_platform_data my_rotary_encoder_info = { - .steps = 24, - .axis = ABS_X, - .relative_axis = false, - .rollover = false, - .gpio_a = GPIO_ROTARY_A, - .gpio_b = GPIO_ROTARY_B, - .inverted_a = 0, - .inverted_b = 0, - .half_period = false, - .wakeup_source = false, -}; - -static struct platform_device rotary_encoder_device = { - .name = "rotary-encoder", - .id = 0, - .dev = { - .platform_data = &my_rotary_encoder_info, - } -}; - +data with it. Because the driver uses generic device properties, this can +be done either via device tree, ACPI, or using static board files, like in +example below: + +:: + + /* board support file example */ + + #include <linux/input.h> + #include <linux/gpio/machine.h> + #include <linux/property.h> + + #define GPIO_ROTARY_A 1 + #define GPIO_ROTARY_B 2 + + static struct gpiod_lookup_table rotary_encoder_gpios = { + .dev_id = "rotary-encoder.0", + .table = { + GPIO_LOOKUP_IDX("gpio-0", + GPIO_ROTARY_A, NULL, 0, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("gpio-0", + GPIO_ROTARY_B, NULL, 1, GPIO_ACTIVE_HIGH), + { }, + }, + }; + + static const struct property_entry rotary_encoder_properties[] __initconst = { + PROPERTY_ENTRY_INTEGER("rotary-encoder,steps-per-period", u32, 24), + PROPERTY_ENTRY_INTEGER("linux,axis", u32, ABS_X), + PROPERTY_ENTRY_INTEGER("rotary-encoder,relative_axis", u32, 0), + { }, + }; + + static struct platform_device rotary_encoder_device = { + .name = "rotary-encoder", + .id = 0, + }; + + ... + + gpiod_add_lookup_table(&rotary_encoder_gpios); + device_add_properties(&rotary_encoder_device, rotary_encoder_properties); + platform_device_register(&rotary_encoder_device); + + ... + +Please consult device tree binding documentation to see all properties +supported by the driver. diff --git a/Documentation/input/devices/sentelic.rst b/Documentation/input/devices/sentelic.rst new file mode 100644 index 000000000000..d7ad603dd77e --- /dev/null +++ b/Documentation/input/devices/sentelic.rst @@ -0,0 +1,901 @@ +.. include:: <isonum.txt> + +================= +Sentelic Touchpad +================= + + +:Copyright: |copy| 2002-2011 Sentelic Corporation. + +:Last update: Dec-07-2011 + +Finger Sensing Pad Intellimouse Mode (scrolling wheel, 4th and 5th buttons) +============================================================================ + +A) MSID 4: Scrolling wheel mode plus Forward page(4th button) and Backward + page (5th button) + +1. Set sample rate to 200; +2. Set sample rate to 200; +3. Set sample rate to 80; +4. Issuing the "Get device ID" command (0xF2) and waits for the response; +5. FSP will respond 0x04. + +:: + + Packet 1 + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |Y|X|y|x|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 | | |B|F|W|W|W|W| + |---------------| |---------------| |---------------| |---------------| + + Byte 1: Bit7 => Y overflow + Bit6 => X overflow + Bit5 => Y sign bit + Bit4 => X sign bit + Bit3 => 1 + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. + Byte 2: X Movement(9-bit 2's complement integers) + Byte 3: Y Movement(9-bit 2's complement integers) + Byte 4: Bit3~Bit0 => the scrolling wheel's movement since the last data report. + valid values, -8 ~ +7 + Bit4 => 1 = 4th mouse button is pressed, Forward one page. + 0 = 4th mouse button is not pressed. + Bit5 => 1 = 5th mouse button is pressed, Backward one page. + 0 = 5th mouse button is not pressed. + +B) MSID 6: Horizontal and Vertical scrolling + +- Set bit 1 in register 0x40 to 1 + +FSP replaces scrolling wheel's movement as 4 bits to show horizontal and +vertical scrolling. + +:: + + Packet 1 + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |Y|X|y|x|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 | | |B|F|r|l|u|d| + |---------------| |---------------| |---------------| |---------------| + + Byte 1: Bit7 => Y overflow + Bit6 => X overflow + Bit5 => Y sign bit + Bit4 => X sign bit + Bit3 => 1 + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. + Byte 2: X Movement(9-bit 2's complement integers) + Byte 3: Y Movement(9-bit 2's complement integers) + Byte 4: Bit0 => the Vertical scrolling movement downward. + Bit1 => the Vertical scrolling movement upward. + Bit2 => the Horizontal scrolling movement leftward. + Bit3 => the Horizontal scrolling movement rightward. + Bit4 => 1 = 4th mouse button is pressed, Forward one page. + 0 = 4th mouse button is not pressed. + Bit5 => 1 = 5th mouse button is pressed, Backward one page. + 0 = 5th mouse button is not pressed. + +C) MSID 7 + +FSP uses 2 packets (8 Bytes) to represent Absolute Position. +so we have PACKET NUMBER to identify packets. + + If PACKET NUMBER is 0, the packet is Packet 1. + If PACKET NUMBER is 1, the packet is Packet 2. + Please count this number in program. + +MSID6 special packet will be enable at the same time when enable MSID 7. + +Absolute position for STL3886-G0 +================================ + +1. Set bit 2 or 3 in register 0x40 to 1 +2. Set bit 6 in register 0x40 to 1 + +:: + + Packet 1 (ABSOLUTE POSITION) + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |0|1|V|1|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|d|u|X|X|Y|Y| + |---------------| |---------------| |---------------| |---------------| + + Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordination packet + => 10, Notify packet + Bit5 => valid bit + Bit4 => 1 + Bit3 => 1 + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. + Byte 2: X coordinate (xpos[9:2]) + Byte 3: Y coordinate (ypos[9:2]) + Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) + Bit3~Bit2 => X coordinate (ypos[1:0]) + Bit4 => scroll up + Bit5 => scroll down + Bit6 => scroll left + Bit7 => scroll right + + Notify Packet for G0 + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |1|0|0|1|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |M|M|M|M|M|M|M|M| 4 |0|0|0|0|0|0|0|0| + |---------------| |---------------| |---------------| |---------------| + + Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordination packet + => 10, Notify packet + Bit5 => 0 + Bit4 => 1 + Bit3 => 1 + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. + Byte 2: Message Type => 0x5A (Enable/Disable status packet) + Mode Type => 0xA5 (Normal/Icon mode status) + Byte 3: Message Type => 0x00 (Disabled) + => 0x01 (Enabled) + Mode Type => 0x00 (Normal) + => 0x01 (Icon) + Byte 4: Bit7~Bit0 => Don't Care + +Absolute position for STL3888-Ax +================================ + +:: + + Packet 1 (ABSOLUTE POSITION) + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |0|1|V|A|1|L|0|1| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |x|x|y|y|X|X|Y|Y| + |---------------| |---------------| |---------------| |---------------| + + Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordination packet + => 10, Notify packet + => 11, Normal data packet with on-pad click + Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. + When both fingers are up, the last two reports have zero valid + bit. + Bit4 => arc + Bit3 => 1 + Bit2 => Left Button, 1 is pressed, 0 is released. + Bit1 => 0 + Bit0 => 1 + Byte 2: X coordinate (xpos[9:2]) + Byte 3: Y coordinate (ypos[9:2]) + Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) + Bit3~Bit2 => X coordinate (ypos[1:0]) + Bit5~Bit4 => y1_g + Bit7~Bit6 => x1_g + + Packet 2 (ABSOLUTE POSITION) + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |0|1|V|A|1|R|1|0| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |x|x|y|y|X|X|Y|Y| + |---------------| |---------------| |---------------| |---------------| + + Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordinates packet + => 10, Notify packet + => 11, Normal data packet with on-pad click + Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. + When both fingers are up, the last two reports have zero valid + bit. + Bit4 => arc + Bit3 => 1 + Bit2 => Right Button, 1 is pressed, 0 is released. + Bit1 => 1 + Bit0 => 0 + Byte 2: X coordinate (xpos[9:2]) + Byte 3: Y coordinate (ypos[9:2]) + Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) + Bit3~Bit2 => X coordinate (ypos[1:0]) + Bit5~Bit4 => y2_g + Bit7~Bit6 => x2_g + + Notify Packet for STL3888-Ax + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |1|0|1|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|d|u|0|0|0|0| + |---------------| |---------------| |---------------| |---------------| + + Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordinates packet + => 10, Notify packet + => 11, Normal data packet with on-pad click + Bit5 => 1 + Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1): + 0: left button is generated by the on-pad command + 1: left button is generated by the external button + Bit3 => 1 + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. + Byte 2: Message Type => 0xB7 (Multi Finger, Multi Coordinate mode) + Byte 3: Bit7~Bit6 => Don't care + Bit5~Bit4 => Number of fingers + Bit3~Bit1 => Reserved + Bit0 => 1: enter gesture mode; 0: leaving gesture mode + Byte 4: Bit7 => scroll right button + Bit6 => scroll left button + Bit5 => scroll down button + Bit4 => scroll up button + * Note that if gesture and additional button (Bit4~Bit7) + happen at the same time, the button information will not + be sent. + Bit3~Bit0 => Reserved + +Sample sequence of Multi-finger, Multi-coordinate mode: + + notify packet (valid bit == 1), abs pkt 1, abs pkt 2, abs pkt 1, + abs pkt 2, ..., notify packet (valid bit == 0) + +Absolute position for STL3888-B0 +================================ + +:: + + Packet 1(ABSOLUTE POSITION) + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |0|1|V|F|1|0|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|u|d|X|X|Y|Y| + |---------------| |---------------| |---------------| |---------------| + + Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordinates packet + => 10, Notify packet + => 11, Normal data packet with on-pad click + Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. + When both fingers are up, the last two reports have zero valid + bit. + Bit4 => finger up/down information. 1: finger down, 0: finger up. + Bit3 => 1 + Bit2 => finger index, 0 is the first finger, 1 is the second finger. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. + Byte 2: X coordinate (xpos[9:2]) + Byte 3: Y coordinate (ypos[9:2]) + Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) + Bit3~Bit2 => X coordinate (ypos[1:0]) + Bit4 => scroll down button + Bit5 => scroll up button + Bit6 => scroll left button + Bit7 => scroll right button + + Packet 2 (ABSOLUTE POSITION) + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |0|1|V|F|1|1|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|u|d|X|X|Y|Y| + |---------------| |---------------| |---------------| |---------------| + + Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordination packet + => 10, Notify packet + => 11, Normal data packet with on-pad click + Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. + When both fingers are up, the last two reports have zero valid + bit. + Bit4 => finger up/down information. 1: finger down, 0: finger up. + Bit3 => 1 + Bit2 => finger index, 0 is the first finger, 1 is the second finger. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. + Byte 2: X coordinate (xpos[9:2]) + Byte 3: Y coordinate (ypos[9:2]) + Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) + Bit3~Bit2 => X coordinate (ypos[1:0]) + Bit4 => scroll down button + Bit5 => scroll up button + Bit6 => scroll left button + Bit7 => scroll right button + +Notify Packet for STL3888-B0:: + + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |1|0|1|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|u|d|0|0|0|0| + |---------------| |---------------| |---------------| |---------------| + + Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordination packet + => 10, Notify packet + => 11, Normal data packet with on-pad click + Bit5 => 1 + Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1): + 0: left button is generated by the on-pad command + 1: left button is generated by the external button + Bit3 => 1 + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. + Byte 2: Message Type => 0xB7 (Multi Finger, Multi Coordinate mode) + Byte 3: Bit7~Bit6 => Don't care + Bit5~Bit4 => Number of fingers + Bit3~Bit1 => Reserved + Bit0 => 1: enter gesture mode; 0: leaving gesture mode + Byte 4: Bit7 => scroll right button + Bit6 => scroll left button + Bit5 => scroll up button + Bit4 => scroll down button + * Note that if gesture and additional button(Bit4~Bit7) + happen at the same time, the button information will not + be sent. + Bit3~Bit0 => Reserved + +Sample sequence of Multi-finger, Multi-coordinate mode: + + notify packet (valid bit == 1), abs pkt 1, abs pkt 2, abs pkt 1, + abs pkt 2, ..., notify packet (valid bit == 0) + +Absolute position for STL3888-Cx and STL3888-Dx +=============================================== + +:: + + Single Finger, Absolute Coordinate Mode (SFAC) + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |0|1|0|P|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|B|F|X|X|Y|Y| + |---------------| |---------------| |---------------| |---------------| + + Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordinates packet + => 10, Notify packet + Bit5 => Coordinate mode(always 0 in SFAC mode): + 0: single-finger absolute coordinates (SFAC) mode + 1: multi-finger, multiple coordinates (MFMC) mode + Bit4 => 0: The LEFT button is generated by on-pad command (OPC) + 1: The LEFT button is generated by external button + Default is 1 even if the LEFT button is not pressed. + Bit3 => Always 1, as specified by PS/2 protocol. + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. + Byte 2: X coordinate (xpos[9:2]) + Byte 3: Y coordinate (ypos[9:2]) + Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) + Bit3~Bit2 => X coordinate (ypos[1:0]) + Bit4 => 4th mouse button(forward one page) + Bit5 => 5th mouse button(backward one page) + Bit6 => scroll left button + Bit7 => scroll right button + + Multi Finger, Multiple Coordinates Mode (MFMC): + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |0|1|1|P|1|F|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|B|F|X|X|Y|Y| + |---------------| |---------------| |---------------| |---------------| + + Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordination packet + => 10, Notify packet + Bit5 => Coordinate mode (always 1 in MFMC mode): + 0: single-finger absolute coordinates (SFAC) mode + 1: multi-finger, multiple coordinates (MFMC) mode + Bit4 => 0: The LEFT button is generated by on-pad command (OPC) + 1: The LEFT button is generated by external button + Default is 1 even if the LEFT button is not pressed. + Bit3 => Always 1, as specified by PS/2 protocol. + Bit2 => Finger index, 0 is the first finger, 1 is the second finger. + If bit 1 and 0 are all 1 and bit 4 is 0, the middle external + button is pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. + Byte 2: X coordinate (xpos[9:2]) + Byte 3: Y coordinate (ypos[9:2]) + Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) + Bit3~Bit2 => X coordinate (ypos[1:0]) + Bit4 => 4th mouse button(forward one page) + Bit5 => 5th mouse button(backward one page) + Bit6 => scroll left button + Bit7 => scroll right button + +When one of the two fingers is up, the device will output four consecutive +MFMC#0 report packets with zero X and Y to represent 1st finger is up or +four consecutive MFMC#1 report packets with zero X and Y to represent that +the 2nd finger is up. On the other hand, if both fingers are up, the device +will output four consecutive single-finger, absolute coordinate(SFAC) packets +with zero X and Y. + +Notify Packet for STL3888-Cx/Dx:: + + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |1|0|0|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|u|d|0|0|0|0| + |---------------| |---------------| |---------------| |---------------| + + Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordinates packet + => 10, Notify packet + Bit5 => Always 0 + Bit4 => 0: The LEFT button is generated by on-pad command(OPC) + 1: The LEFT button is generated by external button + Default is 1 even if the LEFT button is not pressed. + Bit3 => 1 + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. + Byte 2: Message type: + 0xba => gesture information + 0xc0 => one finger hold-rotating gesture + Byte 3: The first parameter for the received message: + 0xba => gesture ID (refer to the 'Gesture ID' section) + 0xc0 => region ID + Byte 4: The second parameter for the received message: + 0xba => N/A + 0xc0 => finger up/down information + +Sample sequence of Multi-finger, Multi-coordinates mode: + + notify packet (valid bit == 1), MFMC packet 1 (byte 1, bit 2 == 0), + MFMC packet 2 (byte 1, bit 2 == 1), MFMC packet 1, MFMC packet 2, + ..., notify packet (valid bit == 0) + + That is, when the device is in MFMC mode, the host will receive + interleaved absolute coordinate packets for each finger. + +FSP Enable/Disable packet +========================= + +:: + + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 + BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |Y|X|0|0|1|M|R|L| 2 |0|1|0|1|1|0|1|E| 3 | | | | | | | | | 4 | | | | | | | | | + |---------------| |---------------| |---------------| |---------------| + + FSP will send out enable/disable packet when FSP receive PS/2 enable/disable + command. Host will receive the packet which Middle, Right, Left button will + be set. The packet only use byte 0 and byte 1 as a pattern of original packet. + Ignore the other bytes of the packet. + + Byte 1: Bit7 => 0, Y overflow + Bit6 => 0, X overflow + Bit5 => 0, Y sign bit + Bit4 => 0, X sign bit + Bit3 => 1 + Bit2 => 1, Middle Button + Bit1 => 1, Right Button + Bit0 => 1, Left Button + Byte 2: Bit7~1 => (0101101b) + Bit0 => 1 = Enable + 0 = Disable + Byte 3: Don't care + Byte 4: Don't care (MOUSE ID 3, 4) + Byte 5~8: Don't care (Absolute packet) + +PS/2 Command Set +================ + +FSP supports basic PS/2 commanding set and modes, refer to following URL for +details about PS/2 commands: + +http://www.computer-engineering.org/ps2mouse/ + +Programming Sequence for Determining Packet Parsing Flow +======================================================== + +1. Identify FSP by reading device ID(0x00) and version(0x01) register + +2. For FSP version < STL3888 Cx, determine number of buttons by reading + the 'test mode status' (0x20) register:: + + buttons = reg[0x20] & 0x30 + + if buttons == 0x30 or buttons == 0x20: + # two/four buttons + Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse' + section A for packet parsing detail(ignore byte 4, bit ~ 7) + elif buttons == 0x10: + # 6 buttons + Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse' + section B for packet parsing detail + elif buttons == 0x00: + # 6 buttons + Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse' + section A for packet parsing detail + +3. For FSP version >= STL3888 Cx: + Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse' + section A for packet parsing detail (ignore byte 4, bit ~ 7) + +Programming Sequence for Register Reading/Writing +================================================= + +Register inversion requirement: + +Following values needed to be inverted(the '~' operator in C) before being +sent to FSP:: + + 0xe8, 0xe9, 0xee, 0xf2, 0xf3 and 0xff. + +Register swapping requirement: + +Following values needed to have their higher 4 bits and lower 4 bits being +swapped before being sent to FSP:: + + 10, 20, 40, 60, 80, 100 and 200. + +Register reading sequence: + + 1. send 0xf3 PS/2 command to FSP; + + 2. send 0x66 PS/2 command to FSP; + + 3. send 0x88 PS/2 command to FSP; + + 4. send 0xf3 PS/2 command to FSP; + + 5. if the register address being to read is not required to be + inverted(refer to the 'Register inversion requirement' section), + goto step 6 + + a. send 0x68 PS/2 command to FSP; + + b. send the inverted register address to FSP and goto step 8; + + 6. if the register address being to read is not required to be + swapped(refer to the 'Register swapping requirement' section), + goto step 7 + + a. send 0xcc PS/2 command to FSP; + + b. send the swapped register address to FSP and goto step 8; + + 7. send 0x66 PS/2 command to FSP; + + a. send the original register address to FSP and goto step 8; + + 8. send 0xe9(status request) PS/2 command to FSP; + + 9. the 4th byte of the response read from FSP should be the + requested register value(?? indicates don't care byte):: + + host: 0xe9 + 3888: 0xfa (??) (??) (val) + + * Note that since the Cx release, the hardware will return 1's + complement of the register value at the 3rd byte of status request + result:: + + host: 0xe9 + 3888: 0xfa (??) (~val) (val) + +Register writing sequence: + + 1. send 0xf3 PS/2 command to FSP; + + 2. if the register address being to write is not required to be + inverted(refer to the 'Register inversion requirement' section), + goto step 3 + + a. send 0x74 PS/2 command to FSP; + + b. send the inverted register address to FSP and goto step 5; + + 3. if the register address being to write is not required to be + swapped(refer to the 'Register swapping requirement' section), + goto step 4 + + a. send 0x77 PS/2 command to FSP; + + b. send the swapped register address to FSP and goto step 5; + + 4. send 0x55 PS/2 command to FSP; + + a. send the register address to FSP and goto step 5; + + 5. send 0xf3 PS/2 command to FSP; + + 6. if the register value being to write is not required to be + inverted(refer to the 'Register inversion requirement' section), + goto step 7 + + a. send 0x47 PS/2 command to FSP; + + b. send the inverted register value to FSP and goto step 9; + + 7. if the register value being to write is not required to be + swapped(refer to the 'Register swapping requirement' section), + goto step 8 + + a. send 0x44 PS/2 command to FSP; + + b. send the swapped register value to FSP and goto step 9; + + 8. send 0x33 PS/2 command to FSP; + + a. send the register value to FSP; + + 9. the register writing sequence is completed. + + * Since the Cx release, the hardware will return 1's + complement of the register value at the 3rd byte of status request + result. Host can optionally send another 0xe9 (status request) PS/2 + command to FSP at the end of register writing to verify that the + register writing operation is successful (?? indicates don't care + byte):: + + host: 0xe9 + 3888: 0xfa (??) (~val) (val) + +Programming Sequence for Page Register Reading/Writing +====================================================== + +In order to overcome the limitation of maximum number of registers +supported, the hardware separates register into different groups called +'pages.' Each page is able to include up to 255 registers. + +The default page after power up is 0x82; therefore, if one has to get +access to register 0x8301, one has to use following sequence to switch +to page 0x83, then start reading/writing from/to offset 0x01 by using +the register read/write sequence described in previous section. + +Page register reading sequence: + + 1. send 0xf3 PS/2 command to FSP; + + 2. send 0x66 PS/2 command to FSP; + + 3. send 0x88 PS/2 command to FSP; + + 4. send 0xf3 PS/2 command to FSP; + + 5. send 0x83 PS/2 command to FSP; + + 6. send 0x88 PS/2 command to FSP; + + 7. send 0xe9(status request) PS/2 command to FSP; + + 8. the response read from FSP should be the requested page value. + + +Page register writing sequence: + + 1. send 0xf3 PS/2 command to FSP; + + 2. send 0x38 PS/2 command to FSP; + + 3. send 0x88 PS/2 command to FSP; + + 4. send 0xf3 PS/2 command to FSP; + + 5. if the page address being written is not required to be + inverted(refer to the 'Register inversion requirement' section), + goto step 6 + + a. send 0x47 PS/2 command to FSP; + + b. send the inverted page address to FSP and goto step 9; + + 6. if the page address being written is not required to be + swapped(refer to the 'Register swapping requirement' section), + goto step 7 + + a. send 0x44 PS/2 command to FSP; + + b. send the swapped page address to FSP and goto step 9; + + 7. send 0x33 PS/2 command to FSP; + + 8. send the page address to FSP; + + 9. the page register writing sequence is completed. + +Gesture ID +========== + +Unlike other devices which sends multiple fingers' coordinates to host, +FSP processes multiple fingers' coordinates internally and convert them +into a 8 bits integer, namely 'Gesture ID.' Following is a list of +supported gesture IDs: + + ======= ================================== + ID Description + ======= ================================== + 0x86 2 finger straight up + 0x82 2 finger straight down + 0x80 2 finger straight right + 0x84 2 finger straight left + 0x8f 2 finger zoom in + 0x8b 2 finger zoom out + 0xc0 2 finger curve, counter clockwise + 0xc4 2 finger curve, clockwise + 0x2e 3 finger straight up + 0x2a 3 finger straight down + 0x28 3 finger straight right + 0x2c 3 finger straight left + 0x38 palm + ======= ================================== + +Register Listing +================ + +Registers are represented in 16 bits values. The higher 8 bits represent +the page address and the lower 8 bits represent the relative offset within +that particular page. Refer to the 'Programming Sequence for Page Register +Reading/Writing' section for instructions on how to change current page +address:: + + offset width default r/w name + 0x8200 bit7~bit0 0x01 RO device ID + + 0x8201 bit7~bit0 RW version ID + 0xc1: STL3888 Ax + 0xd0 ~ 0xd2: STL3888 Bx + 0xe0 ~ 0xe1: STL3888 Cx + 0xe2 ~ 0xe3: STL3888 Dx + + 0x8202 bit7~bit0 0x01 RO vendor ID + + 0x8203 bit7~bit0 0x01 RO product ID + + 0x8204 bit3~bit0 0x01 RW revision ID + + 0x820b test mode status 1 + bit3 1 RO 0: rotate 180 degree + 1: no rotation + *only supported by H/W prior to Cx + + 0x820f register file page control + bit2 0 RW 1: rotate 180 degree + 0: no rotation + *supported since Cx + + bit0 0 RW 1 to enable page 1 register files + *only supported by H/W prior to Cx + + 0x8210 RW system control 1 + bit0 1 RW Reserved, must be 1 + bit1 0 RW Reserved, must be 0 + bit4 0 RW Reserved, must be 0 + bit5 1 RW register clock gating enable + 0: read only, 1: read/write enable + (Note that following registers does not require clock gating being + enabled prior to write: 05 06 07 08 09 0c 0f 10 11 12 16 17 18 23 2e + 40 41 42 43. In addition to that, this bit must be 1 when gesture + mode is enabled) + + 0x8220 test mode status + bit5~bit4 RO number of buttons + 11 => 2, lbtn/rbtn + 10 => 4, lbtn/rbtn/scru/scrd + 01 => 6, lbtn/rbtn/scru/scrd/scrl/scrr + 00 => 6, lbtn/rbtn/scru/scrd/fbtn/bbtn + *only supported by H/W prior to Cx + + 0x8231 RW on-pad command detection + bit7 0 RW on-pad command left button down tag + enable + 0: disable, 1: enable + *only supported by H/W prior to Cx + + 0x8234 RW on-pad command control 5 + bit4~bit0 0x05 RW XLO in 0s/4/1, so 03h = 0010.1b = 2.5 + (Note that position unit is in 0.5 scanline) + *only supported by H/W prior to Cx + + bit7 0 RW on-pad tap zone enable + 0: disable, 1: enable + *only supported by H/W prior to Cx + + 0x8235 RW on-pad command control 6 + bit4~bit0 0x1d RW XHI in 0s/4/1, so 19h = 1100.1b = 12.5 + (Note that position unit is in 0.5 scanline) + *only supported by H/W prior to Cx + + 0x8236 RW on-pad command control 7 + bit4~bit0 0x04 RW YLO in 0s/4/1, so 03h = 0010.1b = 2.5 + (Note that position unit is in 0.5 scanline) + *only supported by H/W prior to Cx + + 0x8237 RW on-pad command control 8 + bit4~bit0 0x13 RW YHI in 0s/4/1, so 11h = 1000.1b = 8.5 + (Note that position unit is in 0.5 scanline) + *only supported by H/W prior to Cx + + 0x8240 RW system control 5 + bit1 0 RW FSP Intellimouse mode enable + 0: disable, 1: enable + *only supported by H/W prior to Cx + + bit2 0 RW movement + abs. coordinate mode enable + 0: disable, 1: enable + (Note that this function has the functionality of bit 1 even when + bit 1 is not set. However, the format is different from that of bit 1. + In addition, when bit 1 and bit 2 are set at the same time, bit 2 will + override bit 1.) + *only supported by H/W prior to Cx + + bit3 0 RW abs. coordinate only mode enable + 0: disable, 1: enable + (Note that this function has the functionality of bit 1 even when + bit 1 is not set. However, the format is different from that of bit 1. + In addition, when bit 1, bit 2 and bit 3 are set at the same time, + bit 3 will override bit 1 and 2.) + *only supported by H/W prior to Cx + + bit5 0 RW auto switch enable + 0: disable, 1: enable + *only supported by H/W prior to Cx + + bit6 0 RW G0 abs. + notify packet format enable + 0: disable, 1: enable + (Note that the absolute/relative coordinate output still depends on + bit 2 and 3. That is, if any of those bit is 1, host will receive + absolute coordinates; otherwise, host only receives packets with + relative coordinate.) + *only supported by H/W prior to Cx + + bit7 0 RW EN_PS2_F2: PS/2 gesture mode 2nd + finger packet enable + 0: disable, 1: enable + *only supported by H/W prior to Cx + + 0x8243 RW on-pad control + bit0 0 RW on-pad control enable + 0: disable, 1: enable + (Note that if this bit is cleared, bit 3/5 will be ineffective) + *only supported by H/W prior to Cx + + bit3 0 RW on-pad fix vertical scrolling enable + 0: disable, 1: enable + *only supported by H/W prior to Cx + + bit5 0 RW on-pad fix horizontal scrolling enable + 0: disable, 1: enable + *only supported by H/W prior to Cx + + 0x8290 RW software control register 1 + bit0 0 RW absolute coordination mode + 0: disable, 1: enable + *supported since Cx + + bit1 0 RW gesture ID output + 0: disable, 1: enable + *supported since Cx + + bit2 0 RW two fingers' coordinates output + 0: disable, 1: enable + *supported since Cx + + bit3 0 RW finger up one packet output + 0: disable, 1: enable + *supported since Cx + + bit4 0 RW absolute coordination continuous mode + 0: disable, 1: enable + *supported since Cx + + bit6~bit5 00 RW gesture group selection + 00: basic + 01: suite + 10: suite pro + 11: advanced + *supported since Cx + + bit7 0 RW Bx packet output compatible mode + 0: disable, 1: enable + *supported since Cx + *supported since Cx + + + 0x833d RW on-pad command control 1 + bit7 1 RW on-pad command detection enable + 0: disable, 1: enable + *supported since Cx + + 0x833e RW on-pad command detection + bit7 0 RW on-pad command left button down tag + enable. Works only in H/W based PS/2 + data packet mode. + 0: disable, 1: enable + *supported since Cx diff --git a/Documentation/input/walkera0701.txt b/Documentation/input/devices/walkera0701.rst index 49e3ac60dcef..2adda99ca717 100644 --- a/Documentation/input/walkera0701.txt +++ b/Documentation/input/devices/walkera0701.rst @@ -1,3 +1,6 @@ +=========================== +Walkera WK-0701 transmitter +=========================== Walkera WK-0701 transmitter is supplied with a ready to fly Walkera helicopters such as HM36, HM37, HM60. The walkera0701 module enables to use @@ -10,7 +13,8 @@ or use cogito: cg-clone http://zub.fei.tuke.sk/GIT/walkera0701-joystick -Connecting to PC: +Connecting to PC +================ At back side of transmitter S-video connector can be found. Modulation pulses from processor to HF part can be found at pin 2 of this connector, @@ -19,7 +23,8 @@ modulation pulses to PC, signal pulses must be amplified. Cable: (walkera TX to parport) -Walkera WK-0701 TX S-VIDEO connector: +Walkera WK-0701 TX S-VIDEO connector:: + (back side of TX) __ __ S-video: canon25 / |_| \ pin 2 (signal) NPN parport @@ -30,10 +35,10 @@ Walkera WK-0701 TX S-VIDEO connector: ------- 3 __________________________________|________________ 25 GND E - I use green LED and BC109 NPN transistor. -Software: +Software +======== Build kernel with walkera0701 module. Module walkera0701 need exclusive access to parport, modules like lp must be unloaded before loading @@ -44,7 +49,8 @@ be changed by TX "joystick", check output from /proc/interrupts. Value for -Technical details: +Technical details +================= Driver use interrupt from parport ACK input bit to measure pulse length using hrtimers. @@ -53,17 +59,29 @@ Frame format: Based on walkera WK-0701 PCM Format description by Shaul Eizikovich. (downloaded from http://www.smartpropoplus.com/Docs/Walkera_Wk-0701_PCM.pdf) -Signal pulses: - (ANALOG) - SYNC BIN OCT - +---------+ +------+ - | | | | ---+ +------+ +--- +Signal pulses +------------- + +:: + + (ANALOG) + SYNC BIN OCT + +---------+ +------+ + | | | | + --+ +------+ +--- + +Frame +----- + +:: -Frame: SYNC , BIN1, OCT1, BIN2, OCT2 ... BIN24, OCT24, BIN25, next frame SYNC .. -pulse length: +pulse length +------------ + +:: + Binary values: Analog octal values: 288 uS Binary 0 318 uS 000 @@ -80,7 +98,8 @@ pulse length: (Warning, pulses on ACK are inverted by transistor, irq is raised up on sync to bin change or octal value to bin change). -Binary data representations: +Binary data representations +--------------------------- One binary and octal value can be grouped to nibble. 24 nibbles + one binary values can be sampled between sync pulses. @@ -100,10 +119,10 @@ binary value can be sampled. This bit and magic number is not used in software driver. Some details about this magic numbers can be found in Walkera_Wk-0701_PCM.pdf. -Checksum calculation: +Checksum calculation +-------------------- Summary of octal values in nibbles must be same as octal value in checksum nibble (only first 3 bits are used). Binary value for checksum nibble is calculated by sum of binary values in checked nibbles + sum of octal values in checked nibbles divided by 8. Only bit 0 of this sum is used. - diff --git a/Documentation/input/xpad.txt b/Documentation/input/devices/xpad.rst index d1b23f295db4..5a709ab77c8d 100644 --- a/Documentation/input/xpad.txt +++ b/Documentation/input/devices/xpad.rst @@ -1,4 +1,6 @@ +======================================================= xpad - Linux USB driver for Xbox compatible controllers +======================================================= This driver exposes all first-party and third-party Xbox compatible controllers. It has a long history and has enjoyed considerable usage @@ -15,9 +17,11 @@ the Xbox One's rumble protocol has not been reverse engineered but in the future could be supported. -0. Notes --------- +Notes +===== + The number of buttons/axes reported varies based on 3 things: + - if you are using a known controller - if you are using a known dance pad - if using an unknown device (one not listed below), what you set in the @@ -35,8 +39,9 @@ This is not true. Both dpad_to_buttons and triggers_to_buttons only affect unknown controllers. -0.1 Normal Controllers ----------------------- +Normal Controllers +------------------ + With a normal controller, the directional pad is mapped to its own X/Y axes. The jstest-program from joystick-1.2.15 (jstest-version 2.1.0) will report 8 axes and 10 buttons. @@ -55,8 +60,9 @@ in game functionality were OK. However, I find it rather difficult to play first person shooters with a pad. Your mileage may vary. -0.2 Xbox Dance Pads -------------------- +Xbox Dance Pads +--------------- + When using a known dance pad, jstest will report 6 axes and 14 buttons. For dance style pads (like the redoctane pad) several changes @@ -73,24 +79,21 @@ of buttons, see section 0.3 - Unknown Controllers I've tested this with Stepmania, and it works quite well. -0.3 Unknown Controllers ----------------------- +Unknown Controllers +------------------- + If you have an unknown xbox controller, it should work just fine with the default settings. HOWEVER if you have an unknown dance pad not listed below, it will not work UNLESS you set "dpad_to_buttons" to 1 in the module configuration. -PLEASE, if you have an unknown controller, email Dom <binary1230@yahoo.com> with -a dump from /proc/bus/usb and a description of the pad (manufacturer, country, -whether it is a dance pad or normal controller) so that we can add your pad -to the list of supported devices, ensuring that it will work out of the -box in the future. +USB adapters +============ -1. USB adapters --------------- All generations of Xbox controllers speak USB over the wire. + - Original Xbox controllers use a proprietary connector and require adapters. - Wireless Xbox 360 controllers require a 'Xbox 360 Wireless Gaming Receiver for Windows' @@ -101,8 +104,9 @@ All generations of Xbox controllers speak USB over the wire. -1.1 Original Xbox USB adapters --------------- +Original Xbox USB adapters +-------------------------- + Using this driver with an Original Xbox controller requires an adapter cable to break out the proprietary connector's pins to USB. You can buy these online fairly cheap, or build your own. @@ -115,7 +119,7 @@ the controller device) with the only difference in a nonstandard connector You just need to solder a USB connector onto the cable and keep the yellow wire unconnected. The other pins have the same order on both connectors so there is no magic to it. Detailed info on these matters -can be found on the net ([1], [2], [3]). +can be found on the net ([1]_, [2]_, [3]_). Thanks to the trip splitter found on the cable you don't even need to cut the original one. You can buy an extension cable and cut that instead. That way, @@ -123,22 +127,46 @@ you can still use the controller with your X-Box, if you have one ;) -2. Driver Installation ----------------------- +Driver Installation +=================== Once you have the adapter cable, if needed, and the controller connected the xpad module should be auto loaded. To confirm you can cat -/proc/bus/usb/devices. There should be an entry like the one at the end [4]. +/sys/kernel/debug/usb/devices. There should be an entry like those: + +.. code-block:: none + :caption: dump from InterAct PowerPad Pro (Germany) + + T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 + D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=32 #Cfgs= 1 + P: Vendor=05fd ProdID=107a Rev= 1.00 + C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA + I: If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=(none) + E: Ad=81(I) Atr=03(Int.) MxPS= 32 Ivl= 10ms + E: Ad=02(O) Atr=03(Int.) MxPS= 32 Ivl= 10ms +.. code-block:: none + :caption: dump from Redoctane Xbox Dance Pad (US) + T: Bus=01 Lev=02 Prnt=09 Port=00 Cnt=01 Dev#= 10 Spd=12 MxCh= 0 + D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 + P: Vendor=0c12 ProdID=8809 Rev= 0.01 + S: Product=XBOX DDR + C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA + I: If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=xpad + E: Ad=82(I) Atr=03(Int.) MxPS= 32 Ivl=4ms + E: Ad=02(O) Atr=03(Int.) MxPS= 32 Ivl=4ms + + +Supported Controllers +===================== -3. Supported Controllers ------------------------- For a full list of supported controllers and associated vendor and product -IDs see the xpad_device[] array[6]. +IDs see the xpad_device[] array\ [4]_. As of the historic version 0.0.6 (2006-10-10) the following devices -were supported: +were supported:: + original Microsoft XBOX controller (US), vendor=0x045e, product=0x0202 smaller Microsoft XBOX controller (US), vendor=0x045e, product=0x0289 original Microsoft XBOX controller (Japan), vendor=0x045e, product=0x0285 @@ -152,14 +180,16 @@ the module option 'dpad_to_buttons'. If you have an unrecognized controller please see 0.3 - Unknown Controllers -4. Manual Testing ------------------ +Manual Testing +============== + To test this driver's functionality you may use 'jstest'. -For example: -> modprobe xpad -> modprobe joydev -> jstest /dev/js0 +For example:: + + > modprobe xpad + > modprobe joydev + > jstest /dev/js0 If you're using a normal controller, there should be a single line showing 18 inputs (8 axes, 10 buttons), and its values should change if you move @@ -170,57 +200,34 @@ It works? Voila, you're done ;) -5. Thanks ---------- +Thanks +====== I have to thank ITO Takayuki for the detailed info on his site - http://euc.jp/periphs/xbox-controller.ja.html. - + http://euc.jp/periphs/xbox-controller.ja.html. + His useful info and both the usb-skeleton as well as the iforce input driver (Greg Kroah-Hartmann; Vojtech Pavlik) helped a lot in rapid prototyping the basic functionality. -6. References -------------- - -[1]: http://euc.jp/periphs/xbox-controller.ja.html (ITO Takayuki) -[2]: http://xpad.xbox-scene.com/ -[3]: http://www.markosweb.com/www/xboxhackz.com/ -[4]: /proc/bus/usb/devices - dump from InterAct PowerPad Pro (Germany): - -T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 -D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=32 #Cfgs= 1 -P: Vendor=05fd ProdID=107a Rev= 1.00 -C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA -I: If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=(none) -E: Ad=81(I) Atr=03(Int.) MxPS= 32 Ivl= 10ms -E: Ad=02(O) Atr=03(Int.) MxPS= 32 Ivl= 10ms - -[5]: /proc/bus/usb/devices - dump from Redoctane Xbox Dance Pad (US): - -T: Bus=01 Lev=02 Prnt=09 Port=00 Cnt=01 Dev#= 10 Spd=12 MxCh= 0 -D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 -P: Vendor=0c12 ProdID=8809 Rev= 0.01 -S: Product=XBOX DDR -C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA -I: If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=xpad -E: Ad=82(I) Atr=03(Int.) MxPS= 32 Ivl=4ms -E: Ad=02(O) Atr=03(Int.) MxPS= 32 Ivl=4ms +References +========== -[6]: http://lxr.free-electrons.com/ident?i=xpad_device +.. [1] http://euc.jp/periphs/xbox-controller.ja.html (ITO Takayuki) +.. [2] http://xpad.xbox-scene.com/ +.. [3] http://www.markosweb.com/www/xboxhackz.com/ +.. [4] http://lxr.free-electrons.com/ident?i=xpad_device +Historic Edits +============== -7. Historic Edits ------------------ -Marko Friedemann <mfr@bmx-chemnitz.de> -2002-07-16 +2002-07-16 - Marko Friedemann <mfr@bmx-chemnitz.de> - original doc -Dominic Cerquetti <binary1230@yahoo.com> -2005-03-19 +2005-03-19 - Dominic Cerquetti <binary1230@yahoo.com> - added stuff for dance pads, new d-pad->axes mappings Later changes may be viewed with 'git log Documentation/input/xpad.txt' diff --git a/Documentation/input/yealink.txt b/Documentation/input/devices/yealink.rst index 8277b76ec506..bb5a1aafeca2 100644 --- a/Documentation/input/yealink.txt +++ b/Documentation/input/devices/yealink.rst @@ -1,8 +1,12 @@ +=============================================== Driver documentation for yealink usb-p1k phones +=============================================== + +Status +====== -0. Status -~~~~~~~~~ The p1k is a relatively cheap usb 1.1 phone with: + - keyboard full support, yealink.ko / input event API - LCD full support, yealink.ko / sysfs API - LED full support, yealink.ko / sysfs API @@ -14,38 +18,11 @@ The p1k is a relatively cheap usb 1.1 phone with: For vendor documentation see http://www.yealink.com -1. Compilation (stand alone version) -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -Currently only kernel 2.6.x.y versions are supported. -In order to build the yealink.ko module do - - make - -If you encounter problems please check if in the MAKE_OPTS variable in -the Makefile is pointing to the location where your kernel sources -are located, default /usr/src/linux. - - -1.1 Troubleshooting -~~~~~~~~~~~~~~~~~~~ -Q: Module yealink compiled and installed without any problem but phone - is not initialized and does not react to any actions. -A: If you see something like: - hiddev0: USB HID v1.00 Device [Yealink Network Technology Ltd. VOIP USB Phone - in dmesg, it means that the hid driver has grabbed the device first. Try to - load module yealink before any other usb hid driver. Please see the - instructions provided by your distribution on module configuration. - -Q: Phone is working now (displays version and accepts keypad input) but I can't - find the sysfs files. -A: The sysfs files are located on the particular usb endpoint. On most - distributions you can do: "find /sys/ -name get_icons" for a hint. - +keyboard features +================= -2. keyboard features -~~~~~~~~~~~~~~~~~~~~ The current mapping in the kernel is provided by the map_p1k_to_key -function: +function:: Physical USB-P1K button layout input events @@ -60,14 +37,15 @@ function: 7 8 9 7, 8, 9, * 0 # *, 0, #, - The "up" and "down" keys, are symbolised by arrows on the button. - The "pickup" and "hangup" keys are symbolised by a green and red phone - on the button. +The "up" and "down" keys, are symbolised by arrows on the button. +The "pickup" and "hangup" keys are symbolised by a green and red phone +on the button. -3. LCD features -~~~~~~~~~~~~~~~ -The LCD is divided and organised as a 3 line display: +LCD features +============ + +The LCD is divided and organised as a 3 line display:: |[] [][] [][] [][] in |[][] |[] M [][] D [][] : [][] out |[][] @@ -79,18 +57,19 @@ The LCD is divided and organised as a 3 line display: [] [] [] [] [] [] [] [] [] [] [] [] -Line 1 Format (see below) : 18.e8.M8.88...188 - Icon names : M D : IN OUT STORE -Line 2 Format : ......... - Icon name : NEW REP SU MO TU WE TH FR SA -Line 3 Format : 888888888888 + Line 1 Format (see below) : 18.e8.M8.88...188 + Icon names : M D : IN OUT STORE + Line 2 Format : ......... + Icon name : NEW REP SU MO TU WE TH FR SA + Line 3 Format : 888888888888 Format description: From a userspace perspective the world is separated into "digits" and "icons". A digit can have a character set, an icon can only be ON or OFF. - Format specifier + Format specifier:: + '8' : Generic 7 segment digit with individual addressable segments Reduced capability 7 segment digit, when segments are hard wired together. @@ -105,9 +84,11 @@ Format description: elements. -4. Driver usage -~~~~~~~~~~~~~~~ -For userland the following interfaces are available using the sysfs interface: +Driver usage +============ + +For userland the following interfaces are available using the sysfs interface:: + /sys/.../ line1 Read/Write, lcd line1 line2 Read/Write, lcd line2 @@ -118,38 +99,43 @@ For userland the following interfaces are available using the sysfs interface: show_icon Write, display the element by writing the icon name. map_seg7 Read/Write, the 7 segments char set, common for all - yealink phones. (see map_to_7segment.h) + yealink phones. (see map_to_7segment.h) ringtone Write, upload binary representation of a ringtone, - see yealink.c. status EXPERIMENTAL due to potential + see yealink.c. status EXPERIMENTAL due to potential races between async. and sync usb calls. -4.1 lineX -~~~~~~~~~ -Reading /sys/../lineX will return the format string with its current value: +lineX +~~~~~ + +Reading /sys/../lineX will return the format string with its current value. + + Example:: - Example: - cat ./line3 - 888888888888 - Linux Rocks! + cat ./line3 + 888888888888 + Linux Rocks! Writing to /sys/../lineX will set the corresponding LCD line. + - Excess characters are ignored. - If less characters are written than allowed, the remaining digits are unchanged. - The tab '\t'and '\n' char does not overwrite the original content. - Writing a space to an icon will always hide its content. - Example: - date +"%m.%e.%k:%M" | sed 's/^0/ /' > ./line1 + Example:: + + date +"%m.%e.%k:%M" | sed 's/^0/ /' > ./line1 Will update the LCD with the current date & time. -4.2 get_icons -~~~~~~~~~~~~~ -Reading will return all available icon names and its current settings: +get_icons +~~~~~~~~~ + +Reading will return all available icon names and its current settings:: cat ./get_icons on M @@ -172,45 +158,68 @@ Reading will return all available icon names and its current settings: RINGTONE -4.3 show/hide icons -~~~~~~~~~~~~~~~~~~~ +show/hide icons +~~~~~~~~~~~~~~~ + Writing to these files will update the state of the icon. Only one icon at a time can be updated. If an icon is also on a ./lineX the corresponding value is updated with the first letter of the icon. - Example - light up the store icon: - echo -n "STORE" > ./show_icon + Example - light up the store icon:: + + echo -n "STORE" > ./show_icon + + cat ./line1 + 18.e8.M8.88...188 + S + + Example - sound the ringtone for 10 seconds:: - cat ./line1 - 18.e8.M8.88...188 - S + echo -n RINGTONE > /sys/..../show_icon + sleep 10 + echo -n RINGTONE > /sys/..../hide_icon - Example - sound the ringtone for 10 seconds: - echo -n RINGTONE > /sys/..../show_icon - sleep 10 - echo -n RINGTONE > /sys/..../hide_icon +Sound features +============== -5. Sound features -~~~~~~~~~~~~~~~~~ Sound is supported by the ALSA driver: snd_usb_audio One 16-bit channel with sample and playback rates of 8000 Hz is the practical limit of the device. - Example - recording test: - arecord -v -d 10 -r 8000 -f S16_LE -t wav foobar.wav + Example - recording test:: - Example - playback test: - aplay foobar.wav + arecord -v -d 10 -r 8000 -f S16_LE -t wav foobar.wav + Example - playback test:: + + aplay foobar.wav + + +Troubleshooting +=============== + +:Q: Module yealink compiled and installed without any problem but phone + is not initialized and does not react to any actions. +:A: If you see something like: + hiddev0: USB HID v1.00 Device [Yealink Network Technology Ltd. VOIP USB Phone + in dmesg, it means that the hid driver has grabbed the device first. Try to + load module yealink before any other usb hid driver. Please see the + instructions provided by your distribution on module configuration. + +:Q: Phone is working now (displays version and accepts keypad input) but I can't + find the sysfs files. +:A: The sysfs files are located on the particular usb endpoint. On most + distributions you can do: "find /sys/ -name get_icons" for a hint. + + +Credits & Acknowledgments +========================= -6. Credits & Acknowledgments -~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - Olivier Vandorpe, for starting the usbb2k-api project doing much of - the reverse engineering. + the reverse engineering. - Martin Diehl, for pointing out how to handle USB memory allocation. - Dmitry Torokhov, for the numerous code reviews and suggestions. - diff --git a/Documentation/input/event-codes.txt b/Documentation/input/event-codes.rst index 575415f4cef0..a8c0873beb95 100644 --- a/Documentation/input/event-codes.txt +++ b/Documentation/input/event-codes.rst @@ -1,3 +1,10 @@ +.. _input-event-codes: + +================= +Input event codes +================= + + The input protocol uses a map of types and codes to express input device values to userspace. This document describes the types and codes and how and when they may be used. @@ -17,82 +24,102 @@ reports supported by a device are also provided by sysfs in class/input/event*/device/capabilities/, and the properties of a device are provided in class/input/event*/device/properties. -Event types: +Event types =========== + Event types are groupings of codes under a logical input construct. Each type has a set of applicable codes to be used in generating events. See the Codes section for details on valid codes for each type. * EV_SYN: + - Used as markers to separate events. Events may be separated in time or in space, such as with the multitouch protocol. * EV_KEY: + - Used to describe state changes of keyboards, buttons, or other key-like devices. * EV_REL: + - Used to describe relative axis value changes, e.g. moving the mouse 5 units to the left. * EV_ABS: + - Used to describe absolute axis value changes, e.g. describing the coordinates of a touch on a touchscreen. * EV_MSC: + - Used to describe miscellaneous input data that do not fit into other types. * EV_SW: + - Used to describe binary state input switches. * EV_LED: + - Used to turn LEDs on devices on and off. * EV_SND: + - Used to output sound to devices. * EV_REP: + - Used for autorepeating devices. * EV_FF: + - Used to send force feedback commands to an input device. * EV_PWR: + - A special type for power button and switch input. * EV_FF_STATUS: + - Used to receive force feedback device status. -Event codes: +Event codes =========== + Event codes define the precise type of event. -EV_SYN: ----------- +EV_SYN +------ + EV_SYN event values are undefined. Their usage is defined only by when they are sent in the evdev event stream. * SYN_REPORT: + - Used to synchronize and separate events into packets of input data changes occurring at the same moment in time. For example, motion of a mouse may set the REL_X and REL_Y values for one motion, then emit a SYN_REPORT. The next motion will emit more REL_X and REL_Y values and send another SYN_REPORT. * SYN_CONFIG: + - TBD * SYN_MT_REPORT: + - Used to synchronize and separate touch events. See the multi-touch-protocol.txt document for more information. * SYN_DROPPED: + - Used to indicate buffer overrun in the evdev client's event queue. Client should ignore all events up to and including next SYN_REPORT event and query the device (using EVIOCG* ioctls) to obtain its current state. -EV_KEY: ----------- +EV_KEY +------ + EV_KEY events take the form KEY_<name> or BTN_<name>. For example, KEY_A is used to represent the 'A' key on a keyboard. When a key is depressed, an event with the key's code is emitted with value 1. When the key is released, an event is @@ -103,6 +130,7 @@ BTN_<name> is used for other types of momentary switch events. A few EV_KEY codes have special meanings: * BTN_TOOL_<name>: + - These codes are used in conjunction with input trackpads, tablets, and touchscreens. These devices may be used with fingers, pens, or other tools. When an event occurs and a tool is used, the corresponding BTN_TOOL_<name> @@ -112,6 +140,7 @@ A few EV_KEY codes have special meanings: code when events are generated. * BTN_TOUCH: + BTN_TOUCH is used for touch contact. While an input tool is determined to be within meaningful physical contact, the value of this property must be set to 1. Meaningful physical contact may mean any contact, or it may mean @@ -132,6 +161,7 @@ future, this distinction will be deprecated and the device properties ioctl EVIOCGPROP, defined in linux/input.h, will be used to convey the device type. * BTN_TOOL_FINGER, BTN_TOOL_DOUBLETAP, BTN_TOOL_TRIPLETAP, BTN_TOOL_QUADTAP: + - These codes denote one, two, three, and four finger interaction on a trackpad or touchscreen. For example, if the user uses two fingers and moves them on the touchpad in an effort to scroll content on screen, @@ -147,8 +177,9 @@ a value of 1 in the same synchronization frame. This usage is deprecated. Note: In multitouch drivers, the input_mt_report_finger_count() function should be used to emit these codes. Please see multi-touch-protocol.txt for details. -EV_REL: ----------- +EV_REL +------ + EV_REL events describe relative changes in a property. For example, a mouse may move to the left by a certain number of units, but its absolute position in space is unknown. If the absolute position is known, EV_ABS codes should be used @@ -157,17 +188,20 @@ instead of EV_REL codes. A few EV_REL codes have special meanings: * REL_WHEEL, REL_HWHEEL: + - These codes are used for vertical and horizontal scroll wheels, respectively. -EV_ABS: ----------- +EV_ABS +------ + EV_ABS events describe absolute changes in a property. For example, a touchpad may emit coordinates for a touch location. A few EV_ABS codes have special meanings: * ABS_DISTANCE: + - Used to describe the distance of a tool from an interaction surface. This event should only be emitted while the tool is hovering, meaning in close proximity of the device and while the value of the BTN_TOUCH code is 0. If @@ -179,11 +213,13 @@ A few EV_ABS codes have special meanings: hardware and is otherwise independent of ABS_DISTANCE and/or BTN_TOUCH. * ABS_MT_<name>: + - Used to describe multitouch input events. Please see multi-touch-protocol.txt for details. -EV_SW: ----------- +EV_SW +----- + EV_SW events describe stateful binary switches. For example, the SW_LID code is used to denote when a laptop lid is closed. @@ -195,14 +231,16 @@ Upon resume, if the switch state is the same as before suspend, then the input subsystem will filter out the duplicate switch state reports. The driver does not need to keep the state of the switch at any time. -EV_MSC: ----------- +EV_MSC +------ + EV_MSC events are used for input and output events that do not fall under other categories. A few EV_MSC codes have special meaning: * MSC_TIMESTAMP: + - Used to report the number of microseconds since the last reset. This event should be coded as an uint32 value, which is allowed to wrap around with no special consequence. It is assumed that the time difference between two @@ -211,39 +249,46 @@ A few EV_MSC codes have special meaning: unknown. If the device does not provide this information, the driver must not provide it to user space. -EV_LED: ----------- +EV_LED +------ + EV_LED events are used for input and output to set and query the state of various LEDs on devices. -EV_REP: ----------- +EV_REP +------ + EV_REP events are used for specifying autorepeating events. -EV_SND: ----------- +EV_SND +------ + EV_SND events are used for sending sound commands to simple sound output devices. -EV_FF: ----------- +EV_FF +----- + EV_FF events are used to initialize a force feedback capable device and to cause such device to feedback. -EV_PWR: ----------- +EV_PWR +------ + EV_PWR events are a special type of event used specifically for power management. Its usage is not well defined. To be addressed later. -Device properties: +Device properties ================= + Normally, userspace sets up an input device based on the data it emits, i.e., the event types. In the case of two devices emitting the same event types, additional information can be provided in the form of device properties. -INPUT_PROP_DIRECT + INPUT_PROP_POINTER: +INPUT_PROP_DIRECT + INPUT_PROP_POINTER -------------------------------------- + The INPUT_PROP_DIRECT property indicates that device coordinates should be directly mapped to screen coordinates (not taking into account trivial transformations, such as scaling, flipping and rotating). Non-direct input @@ -260,8 +305,9 @@ If neither INPUT_PROP_DIRECT or INPUT_PROP_POINTER are set, the property is considered undefined and the device type should be deduced in the traditional way, using emitted event types. -INPUT_PROP_BUTTONPAD: +INPUT_PROP_BUTTONPAD -------------------- + For touchpads where the button is placed beneath the surface, such that pressing down on the pad causes a button click, this property should be set. Common in clickpad notebooks and macbooks from 2009 and onwards. @@ -270,8 +316,9 @@ Originally, the buttonpad property was coded into the bcm5974 driver version field under the name integrated button. For backwards compatibility, both methods need to be checked in userspace. -INPUT_PROP_SEMI_MT: +INPUT_PROP_SEMI_MT ------------------ + Some touchpads, most common between 2008 and 2011, can detect the presence of multiple contacts without resolving the individual positions; only the number of contacts and a rectangular shape is known. For such @@ -285,9 +332,10 @@ gestures can normally be extracted from it. If INPUT_PROP_SEMI_MT is not set, the device is assumed to be a true MT device. -INPUT_PROP_TOPBUTTONPAD: +INPUT_PROP_TOPBUTTONPAD ----------------------- -Some laptops, most notably the Lenovo *40 series provide a trackstick + +Some laptops, most notably the Lenovo 40 series provide a trackstick device but do not have physical buttons associated with the trackstick device. Instead, the top area of the touchpad is marked to show visual/haptic areas for left, middle, right buttons intended to be used @@ -299,7 +347,8 @@ The kernel does not provide button emulation for such devices but treats them as any other INPUT_PROP_BUTTONPAD device. INPUT_PROP_ACCELEROMETER -------------------------- +------------------------ + Directional axes on this device (absolute and/or relative x, y, z) represent accelerometer data. Some devices also report gyroscope data, which devices can report through the rotational axes (absolute and/or relative rx, ry, rz). @@ -307,21 +356,24 @@ can report through the rotational axes (absolute and/or relative rx, ry, rz). All other axes retain their meaning. A device must not mix regular directional axes and accelerometer axes on the same event node. -Guidelines: +Guidelines ========== + The guidelines below ensure proper single-touch and multi-finger functionality. For multi-touch functionality, see the multi-touch-protocol.txt document for more information. -Mice: ----------- +Mice +---- + REL_{X,Y} must be reported when the mouse moves. BTN_LEFT must be used to report the primary button press. BTN_{MIDDLE,RIGHT,4,5,etc.} should be used to report further buttons of the device. REL_WHEEL and REL_HWHEEL should be used to report scroll wheel events where available. -Touchscreens: ----------- +Touchscreens +------------ + ABS_{X,Y} must be reported with the location of the touch. BTN_TOUCH must be used to report when a touch is active on the screen. BTN_{MOUSE,LEFT,MIDDLE,RIGHT} must not be reported as the result of touch @@ -329,8 +381,9 @@ contact. BTN_TOOL_<name> events should be reported where possible. For new hardware, INPUT_PROP_DIRECT should be set. -Trackpads: ----------- +Trackpads +--------- + Legacy trackpads that only provide relative position information must report events like mice described above. @@ -341,8 +394,9 @@ be used to report the number of touches active on the trackpad. For new hardware, INPUT_PROP_POINTER should be set. -Tablets: ----------- +Tablets +------- + BTN_TOOL_<name> events must be reported when a stylus or other tool is active on the tablet. ABS_{X,Y} must be reported with the location of the tool. BTN_TOUCH should be used to report when the tool is in contact with the tablet. diff --git a/Documentation/input/ff.txt b/Documentation/input/ff.rst index be742eec7aab..6a265a6934e6 100644 --- a/Documentation/input/ff.txt +++ b/Documentation/input/ff.rst @@ -1,12 +1,16 @@ -Force feedback for Linux. -By Johann Deneux <johann.deneux@gmail.com> on 2001/04/22. -Updated by Anssi Hannula <anssi.hannula@gmail.com> on 2006/04/09. -You may redistribute this file. Please remember to include shape.fig and -interactive.fig as well. ----------------------------------------------------------------------------- - -1. Introduction -~~~~~~~~~~~~~~~ +======================== +Force feedback for Linux +======================== + +:Author: Johann Deneux <johann.deneux@gmail.com> on 2001/04/22. +:Updated: Anssi Hannula <anssi.hannula@gmail.com> on 2006/04/09. + +You may redistribute this file. Please remember to include shape.svg and +interactive.svg as well. + +Introduction +~~~~~~~~~~~~ + This document describes how to use force feedback devices under Linux. The goal is not to support these devices as if they were simple input-only devices (as it is already the case), but to really enable the rendering of force @@ -15,8 +19,9 @@ This document only describes the force feedback part of the Linux input interface. Please read joystick.txt and input.txt before reading further this document. -2. Instructions to the user -~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Instructions to the user +~~~~~~~~~~~~~~~~~~~~~~~~ + To enable force feedback, you have to: 1. have your kernel configured with evdev and a driver that supports your @@ -33,39 +38,48 @@ something goes wrong. If you have a serial iforce device, you need to start inputattach. See joystick.txt for details. -2.1 Does it work ? -~~~~~~~~~~~~~~~~~~ -There is an utility called fftest that will allow you to test the driver. -% fftest /dev/input/eventXX +Does it work ? +-------------- + +There is an utility called fftest that will allow you to test the driver:: + + % fftest /dev/input/eventXX + +Instructions to the developer +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -3. Instructions to the developer -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ All interactions are done using the event API. That is, you can use ioctl() and write() on /dev/input/eventXX. This information is subject to change. -3.1 Querying device capabilities -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -#include <linux/input.h> -#include <sys/ioctl.h> +Querying device capabilities +---------------------------- + +:: -#define BITS_TO_LONGS(x) \ - (((x) + 8 * sizeof (unsigned long) - 1) / (8 * sizeof (unsigned long))) -unsigned long features[BITS_TO_LONGS(FF_CNT)]; -int ioctl(int file_descriptor, int request, unsigned long *features); + #include <linux/input.h> + #include <sys/ioctl.h> + + #define BITS_TO_LONGS(x) \ + (((x) + 8 * sizeof (unsigned long) - 1) / (8 * sizeof (unsigned long))) + unsigned long features[BITS_TO_LONGS(FF_CNT)]; + int ioctl(int file_descriptor, int request, unsigned long *features); "request" must be EVIOCGBIT(EV_FF, size of features array in bytes ) Returns the features supported by the device. features is a bitfield with the following bits: + - FF_CONSTANT can render constant force effects - FF_PERIODIC can render periodic effects with the following waveforms: + - FF_SQUARE square waveform - FF_TRIANGLE triangle waveform - FF_SINE sine waveform - FF_SAW_UP sawtooth up waveform - FF_SAW_DOWN sawtooth down waveform - FF_CUSTOM custom waveform + - FF_RAMP can render ramp effects - FF_SPRING can simulate the presence of a spring - FF_FRICTION can simulate friction @@ -75,24 +89,30 @@ following bits: - FF_GAIN gain is adjustable - FF_AUTOCENTER autocenter is adjustable -Note: In most cases you should use FF_PERIODIC instead of FF_RUMBLE. All +.. note:: + + - In most cases you should use FF_PERIODIC instead of FF_RUMBLE. All devices that support FF_RUMBLE support FF_PERIODIC (square, triangle, sine) and the other way around. -Note: The exact syntax FF_CUSTOM is undefined for the time being as no driver + - The exact syntax FF_CUSTOM is undefined for the time being as no driver supports it yet. +:: -int ioctl(int fd, EVIOCGEFFECTS, int *n); + int ioctl(int fd, EVIOCGEFFECTS, int *n); Returns the number of effects the device can keep in its memory. -3.2 Uploading effects to the device -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -#include <linux/input.h> -#include <sys/ioctl.h> +Uploading effects to the device +------------------------------- + +:: -int ioctl(int file_descriptor, int request, struct ff_effect *effect); + #include <linux/input.h> + #include <sys/ioctl.h> + + int ioctl(int file_descriptor, int request, struct ff_effect *effect); "request" must be EVIOCSFF. @@ -106,38 +126,53 @@ allocate a new effect. Effects are file descriptor specific. -See <uapi/linux/input.h> for a description of the ff_effect struct. You should -also find help in a few sketches, contained in files shape.fig and -interactive.fig. You need xfig to visualize these files. +See <uapi/linux/input.h> for a description of the ff_effect struct. You +should also find help in a few sketches, contained in files shape.svg +and interactive.svg: + +.. figure:: shape.svg -3.3 Removing an effect from the device -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -int ioctl(int fd, EVIOCRMFF, effect.id); + Shape + +.. figure:: interactive.svg + + Interactive + + +Removing an effect from the device +---------------------------------- + +:: + + int ioctl(int fd, EVIOCRMFF, effect.id); This makes room for new effects in the device's memory. Note that this also stops the effect if it was playing. -3.4 Controlling the playback of effects -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Controlling the playback of effects +----------------------------------- + Control of playing is done with write(). Below is an example: -#include <linux/input.h> -#include <unistd.h> +:: + + #include <linux/input.h> + #include <unistd.h> struct input_event play; struct input_event stop; struct ff_effect effect; int fd; -... + ... fd = open("/dev/input/eventXX", O_RDWR); -... + ... /* Play three times */ play.type = EV_FF; play.code = effect.id; play.value = 3; write(fd, (const void*) &play, sizeof(play)); -... + ... /* Stop an effect */ stop.type = EV_FF; stop.code = effect.id; @@ -145,43 +180,50 @@ Control of playing is done with write(). Below is an example: write(fd, (const void*) &play, sizeof(stop)); -3.5 Setting the gain -~~~~~~~~~~~~~~~~~~~~ +Setting the gain +---------------- + Not all devices have the same strength. Therefore, users should set a gain factor depending on how strong they want effects to be. This setting is persistent across access to the driver. -/* Set the gain of the device -int gain; /* between 0 and 100 */ -struct input_event ie; /* structure used to communicate with the driver */ +:: + + /* Set the gain of the device + int gain; /* between 0 and 100 */ + struct input_event ie; /* structure used to communicate with the driver */ -ie.type = EV_FF; -ie.code = FF_GAIN; -ie.value = 0xFFFFUL * gain / 100; + ie.type = EV_FF; + ie.code = FF_GAIN; + ie.value = 0xFFFFUL * gain / 100; -if (write(fd, &ie, sizeof(ie)) == -1) + if (write(fd, &ie, sizeof(ie)) == -1) perror("set gain"); -3.6 Enabling/Disabling autocenter -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Enabling/Disabling autocenter +----------------------------- + The autocenter feature quite disturbs the rendering of effects in my opinion, and I think it should be an effect, which computation depends on the game type. But you can enable it if you want. -int autocenter; /* between 0 and 100 */ -struct input_event ie; +:: + + int autocenter; /* between 0 and 100 */ + struct input_event ie; -ie.type = EV_FF; -ie.code = FF_AUTOCENTER; -ie.value = 0xFFFFUL * autocenter / 100; + ie.type = EV_FF; + ie.code = FF_AUTOCENTER; + ie.value = 0xFFFFUL * autocenter / 100; -if (write(fd, &ie, sizeof(ie)) == -1) + if (write(fd, &ie, sizeof(ie)) == -1) perror("set auto-center"); A value of 0 means "no auto-center". -3.7 Dynamic update of an effect -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Dynamic update of an effect +--------------------------- + Proceed as if you wanted to upload a new effect, except that instead of setting the id field to -1, you set it to the wanted effect id. Normally, the effect is not stopped and restarted. However, depending on the @@ -192,30 +234,32 @@ case, the driver stops the effect, up-load it, and restart it. Therefore it is recommended to dynamically change direction while the effect is playing only when it is ok to restart the effect with a replay count of 1. -3.8 Information about the status of effects -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Information about the status of effects +--------------------------------------- + Every time the status of an effect is changed, an event is sent. The values -and meanings of the fields of the event are as follows: +and meanings of the fields of the event are as follows:: -struct input_event { -/* When the status of the effect changed */ - struct timeval time; + struct input_event { + /* When the status of the effect changed */ + struct timeval time; -/* Set to EV_FF_STATUS */ - unsigned short type; + /* Set to EV_FF_STATUS */ + unsigned short type; -/* Contains the id of the effect */ - unsigned short code; + /* Contains the id of the effect */ + unsigned short code; -/* Indicates the status */ - unsigned int value; -}; + /* Indicates the status */ + unsigned int value; + }; -FF_STATUS_STOPPED The effect stopped playing -FF_STATUS_PLAYING The effect started to play + FF_STATUS_STOPPED The effect stopped playing + FF_STATUS_PLAYING The effect started to play -NOTE: Status feedback is only supported by iforce driver. If you have +.. note:: + + - Status feedback is only supported by iforce driver. If you have a really good reason to use this, please contact linux-joystick@atrey.karlin.mff.cuni.cz or anssi.hannula@gmail.com so that support for it can be added to the rest of the drivers. - diff --git a/Documentation/input/gamepad.txt b/Documentation/input/gamepad.rst index 3f6d8a5e9cdc..4d5e7fb80a84 100644 --- a/Documentation/input/gamepad.txt +++ b/Documentation/input/gamepad.rst @@ -1,15 +1,19 @@ - Linux Gamepad API ----------------------------------------------------------------------------- +--------------------------- +Linux Gamepad Specification +--------------------------- -1. Intro -~~~~~~~~ +:Author: 2013 by David Herrmann <dh.herrmann@gmail.com> + + +Introduction +~~~~~~~~~~~~ Linux provides many different input drivers for gamepad hardware. To avoid having user-space deal with different button-mappings for each gamepad, this document defines how gamepads are supposed to report their data. -2. Geometry -~~~~~~~~~~~ -As "gamepad" we define devices which roughly look like this: +Geometry +~~~~~~~~ +As "gamepad" we define devices which roughly look like this:: ____________________________ __ / [__ZL__] [__ZR__] \ | @@ -35,6 +39,7 @@ As "gamepad" we define devices which roughly look like this: Menu Pad Most gamepads have the following features: + - Action-Pad 4 buttons in diamonds-shape (on the right side). The buttons are differently labeled on most devices so we define them as NORTH, @@ -58,8 +63,9 @@ Most gamepads have the following features: Many devices provide force-feedback features. But are mostly just simple rumble motors. -3. Detection -~~~~~~~~~~~~ +Detection +~~~~~~~~~ + All gamepads that follow the protocol described here map BTN_GAMEPAD. This is an alias for BTN_SOUTH/BTN_A. It can be used to identify a gamepad as such. However, not all gamepads provide all features, so you need to test for all @@ -85,75 +91,101 @@ devices that report a small subset of the events. No other devices, that do not look/feel like a gamepad, shall report these events. -4. Events -~~~~~~~~~ +Events +~~~~~~ + Gamepads report the following events: -Action-Pad: +- Action-Pad: + Every gamepad device has at least 2 action buttons. This means, that every device reports BTN_SOUTH (which BTN_GAMEPAD is an alias for). Regardless of the labels on the buttons, the codes are sent according to the physical position of the buttons. + Please note that 2- and 3-button pads are fairly rare and old. You might want to filter gamepads that do not report all four. - 2-Button Pad: + + - 2-Button Pad: + If only 2 action-buttons are present, they are reported as BTN_SOUTH and BTN_EAST. For vertical layouts, the upper button is BTN_EAST. For horizontal layouts, the button more on the right is BTN_EAST. - 3-Button Pad: + + - 3-Button Pad: + If only 3 action-buttons are present, they are reported as (from left to right): BTN_WEST, BTN_SOUTH, BTN_EAST If the buttons are aligned perfectly vertically, they are reported as (from top down): BTN_WEST, BTN_SOUTH, BTN_EAST - 4-Button Pad: + + - 4-Button Pad: + If all 4 action-buttons are present, they can be aligned in two different formations. If diamond-shaped, they are reported as BTN_NORTH, BTN_WEST, BTN_SOUTH, BTN_EAST according to their physical location. If rectangular-shaped, the upper-left button is BTN_NORTH, lower-left is BTN_WEST, lower-right is BTN_SOUTH and upper-right is BTN_EAST. -D-Pad: +- D-Pad: + Every gamepad provides a D-Pad with four directions: Up, Down, Left, Right Some of these are available as digital buttons, some as analog buttons. Some may even report both. The kernel does not convert between these so applications should support both and choose what is more appropriate if both are reported. - Digital buttons are reported as: + + - Digital buttons are reported as: + BTN_DPAD_* - Analog buttons are reported as: + + - Analog buttons are reported as: + ABS_HAT0X and ABS_HAT0Y - (for ABS values negative is left/up, positive is right/down) -Analog-Sticks: + (for ABS values negative is left/up, positive is right/down) + +- Analog-Sticks: + The left analog-stick is reported as ABS_X, ABS_Y. The right analog stick is reported as ABS_RX, ABS_RY. Zero, one or two sticks may be present. If analog-sticks provide digital buttons, they are mapped accordingly as BTN_THUMBL (first/left) and BTN_THUMBR (second/right). - (for ABS values negative is left/up, positive is right/down) -Triggers: + (for ABS values negative is left/up, positive is right/down) + +- Triggers: + Trigger buttons can be available as digital or analog buttons or both. User- space must correctly deal with any situation and choose the most appropriate mode. + Upper trigger buttons are reported as BTN_TR or ABS_HAT1X (right) and BTN_TL or ABS_HAT1Y (left). Lower trigger buttons are reported as BTN_TR2 or ABS_HAT2X (right/ZR) and BTN_TL2 or ABS_HAT2Y (left/ZL). + If only one trigger-button combination is present (upper+lower), they are reported as "right" triggers (BTN_TR/ABS_HAT1X). - (ABS trigger values start at 0, pressure is reported as positive values) -Menu-Pad: + (ABS trigger values start at 0, pressure is reported as positive values) + +- Menu-Pad: + Menu buttons are always digital and are mapped according to their location instead of their labels. That is: - 1-button Pad: Mapped as BTN_START - 2-button Pad: Left button mapped as BTN_SELECT, right button mapped as - BTN_START + + - 1-button Pad: + + Mapped as BTN_START + + - 2-button Pad: + + Left button mapped as BTN_SELECT, right button mapped as BTN_START + Many pads also have a third button which is branded or has a special symbol and meaning. Such buttons are mapped as BTN_MODE. Examples are the Nintendo "HOME" button, the XBox "X"-button or Sony "PS" button. -Rumble: - Rumble is advertised as FF_RUMBLE. +- Rumble: ----------------------------------------------------------------------------- - Written 2013 by David Herrmann <dh.herrmann@gmail.com> + Rumble is advertised as FF_RUMBLE. diff --git a/Documentation/input/gameport-programming.txt b/Documentation/input/gameport-programming.rst index 03a74fc3b496..c96911df1c54 100644 --- a/Documentation/input/gameport-programming.txt +++ b/Documentation/input/gameport-programming.rst @@ -1,11 +1,12 @@ +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Programming gameport drivers ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -1. A basic classic gameport -~~~~~~~~~~~~~~~~~~~~~~~~~~~ +A basic classic gameport +~~~~~~~~~~~~~~~~~~~~~~~~ If the gameport doesn't provide more than the inb()/outb() functionality, -the code needed to register it with the joystick drivers is simple: +the code needed to register it with the joystick drivers is simple:: struct gameport gameport; @@ -37,12 +38,12 @@ space only when something really is using it. Disable it again in the callback, so that it doesn't fail if some of the possible addresses are already occupied by other gameports. -2. Memory mapped gameport -~~~~~~~~~~~~~~~~~~~~~~~~~ +Memory mapped gameport +~~~~~~~~~~~~~~~~~~~~~~ When a gameport can be accessed through MMIO, this way is preferred, because it is faster, allowing more reads per second. Registering such a gameport -isn't as easy as a basic IO one, but not so much complex: +isn't as easy as a basic IO one, but not so much complex:: struct gameport gameport; @@ -53,19 +54,21 @@ isn't as easy as a basic IO one, but not so much complex: unsigned char my_read(struct gameport *gameport) { - return my_mmio; + return my_mmio; } gameport.read = my_read; gameport.trigger = my_trigger; gameport_register_port(&gameport); -3. Cooked mode gameport -~~~~~~~~~~~~~~~~~~~~~~~ +.. _gameport_pgm_cooked_mode: + +Cooked mode gameport +~~~~~~~~~~~~~~~~~~~~ There are gameports that can report the axis values as numbers, that means the driver doesn't have to measure them the old way - an ADC is built into -the gameport. To register a cooked gameport: +the gameport. To register a cooked gameport:: struct gameport gameport; @@ -95,8 +98,8 @@ See analog.c and input.c for handling of fuzz - the fuzz value determines the size of a gaussian filter window that is used to eliminate the noise in the data. -4. More complex gameports -~~~~~~~~~~~~~~~~~~~~~~~~~ +More complex gameports +~~~~~~~~~~~~~~~~~~~~~~ Gameports can support both raw and cooked modes. In that case combine either examples 1+2 or 1+3. Gameports can support internal calibration - see below, @@ -104,65 +107,91 @@ and also lightning.c and analog.c on how that works. If your driver supports more than one gameport instance simultaneously, use the ->private member of the gameport struct to point to your data. -5. Unregistering a gameport -~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Unregistering a gameport +~~~~~~~~~~~~~~~~~~~~~~~~ + +Simple:: + + gameport_unregister_port(&gameport); + +The gameport structure +~~~~~~~~~~~~~~~~~~~~~~ -Simple: +.. note:: -gameport_unregister_port(&gameport); + This section is outdated. There are several fields here that don't + match what's there at include/linux/gameport.h. -6. The gameport structure -~~~~~~~~~~~~~~~~~~~~~~~~~ +:: -struct gameport { + struct gameport { void *private; A private pointer for free use in the gameport driver. (Not the joystick driver!) +:: + int number; Number assigned to the gameport when registered. Informational purpose only. +:: + int io; I/O address for use with raw mode. You have to either set this, or ->read() to some value if your gameport supports raw mode. +:: + int speed; Raw mode speed of the gameport reads in thousands of reads per second. +:: + int fuzz; If the gameport supports cooked mode, this should be set to a value that -represents the amount of noise in the data. See section 3. +represents the amount of noise in the data. See +:ref:`gameport_pgm_cooked_mode`. + +:: void (*trigger)(struct gameport *); Trigger. This function should trigger the ns558 oneshots. If set to NULL, outb(0xff, io) will be used. +:: + unsigned char (*read)(struct gameport *); Read the buttons and ns558 oneshot bits. If set to NULL, inb(io) will be used instead. - int (*cooked_read)(struct gameport *, int *axes, int *buttons); +:: + + int (*cooked_read)(struct gameport *, int *axes, int *buttons); If the gameport supports cooked mode, it should point this to its cooked read function. It should fill axes[0..3] with four values of the joystick axes and buttons[0] with four bits representing the buttons. - int (*calibrate)(struct gameport *, int *axes, int *max); +:: + + int (*calibrate)(struct gameport *, int *axes, int *max); Function for calibrating the ADC hardware. When called, axes[0..3] should be pre-filled by cooked data by the caller, max[0..3] should be pre-filled with expected maximums for each axis. The calibrate() function should set the sensitivity of the ADC hardware so that the maximums fit in its range and recompute the axes[] values to match the new sensitivity or re-read them from -the hardware so that they give valid values. +the hardware so that they give valid values. + +:: int (*open)(struct gameport *, int mode); @@ -172,16 +201,22 @@ Second, resource allocation can happen here. The port can also be enabled here. Prior to this call, other fields of the gameport struct (namely the io member) need not to be valid. +:: + void (*close)(struct gameport *); Close() should free the resources allocated by open, possibly disabling the gameport. +:: + struct gameport_dev *dev; struct gameport *next; For internal use by the gameport layer. -}; +:: + + }; Enjoy! diff --git a/Documentation/input/gpio-tilt.txt b/Documentation/input/gpio-tilt.txt deleted file mode 100644 index 2cdfd9bcb1af..000000000000 --- a/Documentation/input/gpio-tilt.txt +++ /dev/null @@ -1,103 +0,0 @@ -Driver for tilt-switches connected via GPIOs -============================================ - -Generic driver to read data from tilt switches connected via gpios. -Orientation can be provided by one or more than one tilt switches, -i.e. each tilt switch providing one axis, and the number of axes -is also not limited. - - -Data structures: ----------------- - -The array of struct gpio in the gpios field is used to list the gpios -that represent the current tilt state. - -The array of struct gpio_tilt_axis describes the axes that are reported -to the input system. The values set therein are used for the -input_set_abs_params calls needed to init the axes. - -The array of struct gpio_tilt_state maps gpio states to the corresponding -values to report. The gpio state is represented as a bitfield where the -bit-index corresponds to the index of the gpio in the struct gpio array. -In the same manner the values stored in the axes array correspond to -the elements of the gpio_tilt_axis-array. - - -Example: --------- - -Example configuration for a single TS1003 tilt switch that rotates around -one axis in 4 steps and emits the current tilt via two GPIOs. - -static int sg060_tilt_enable(struct device *dev) { - /* code to enable the sensors */ -}; - -static void sg060_tilt_disable(struct device *dev) { - /* code to disable the sensors */ -}; - -static struct gpio sg060_tilt_gpios[] = { - { SG060_TILT_GPIO_SENSOR1, GPIOF_IN, "tilt_sensor1" }, - { SG060_TILT_GPIO_SENSOR2, GPIOF_IN, "tilt_sensor2" }, -}; - -static struct gpio_tilt_state sg060_tilt_states[] = { - { - .gpios = (0 << 1) | (0 << 0), - .axes = (int[]) { - 0, - }, - }, { - .gpios = (0 << 1) | (1 << 0), - .axes = (int[]) { - 1, /* 90 degrees */ - }, - }, { - .gpios = (1 << 1) | (1 << 0), - .axes = (int[]) { - 2, /* 180 degrees */ - }, - }, { - .gpios = (1 << 1) | (0 << 0), - .axes = (int[]) { - 3, /* 270 degrees */ - }, - }, -}; - -static struct gpio_tilt_axis sg060_tilt_axes[] = { - { - .axis = ABS_RY, - .min = 0, - .max = 3, - .fuzz = 0, - .flat = 0, - }, -}; - -static struct gpio_tilt_platform_data sg060_tilt_pdata= { - .gpios = sg060_tilt_gpios, - .nr_gpios = ARRAY_SIZE(sg060_tilt_gpios), - - .axes = sg060_tilt_axes, - .nr_axes = ARRAY_SIZE(sg060_tilt_axes), - - .states = sg060_tilt_states, - .nr_states = ARRAY_SIZE(sg060_tilt_states), - - .debounce_interval = 100, - - .poll_interval = 1000, - .enable = sg060_tilt_enable, - .disable = sg060_tilt_disable, -}; - -static struct platform_device sg060_device_tilt = { - .name = "gpio-tilt-polled", - .id = -1, - .dev = { - .platform_data = &sg060_tilt_pdata, - }, -}; diff --git a/Documentation/input/iforce-protocol.txt b/Documentation/input/iforce-protocol.txt deleted file mode 100644 index 66287151c54a..000000000000 --- a/Documentation/input/iforce-protocol.txt +++ /dev/null @@ -1,258 +0,0 @@ -** Introduction -This document describes what I managed to discover about the protocol used to -specify force effects to I-Force 2.0 devices. None of this information comes -from Immerse. That's why you should not trust what is written in this -document. This document is intended to help understanding the protocol. -This is not a reference. Comments and corrections are welcome. To contact me, -send an email to: johann.deneux@gmail.com - -** WARNING ** -I shall not be held responsible for any damage or harm caused if you try to -send data to your I-Force device based on what you read in this document. - -** Preliminary Notes: -All values are hexadecimal with big-endian encoding (msb on the left). Beware, -values inside packets are encoded using little-endian. Bytes whose roles are -unknown are marked ??? Information that needs deeper inspection is marked (?) - -** General form of a packet ** -This is how packets look when the device uses the rs232 to communicate. -2B OP LEN DATA CS -CS is the checksum. It is equal to the exclusive or of all bytes. - -When using USB: -OP DATA -The 2B, LEN and CS fields have disappeared, probably because USB handles frames and -data corruption is handled or unsignificant. - -First, I describe effects that are sent by the device to the computer - -** Device input state -This packet is used to indicate the state of each button and the value of each -axis -OP= 01 for a joystick, 03 for a wheel -LEN= Varies from device to device -00 X-Axis lsb -01 X-Axis msb -02 Y-Axis lsb, or gas pedal for a wheel -03 Y-Axis msb, or brake pedal for a wheel -04 Throttle -05 Buttons -06 Lower 4 bits: Buttons - Upper 4 bits: Hat -07 Rudder - -** Device effects states -OP= 02 -LEN= Varies -00 ? Bit 1 (Value 2) is the value of the deadman switch -01 Bit 8 is set if the effect is playing. Bits 0 to 7 are the effect id. -02 ?? -03 Address of parameter block changed (lsb) -04 Address of parameter block changed (msb) -05 Address of second parameter block changed (lsb) -... depending on the number of parameter blocks updated - -** Force effect ** -OP= 01 -LEN= 0e -00 Channel (when playing several effects at the same time, each must be assigned a channel) -01 Wave form - Val 00 Constant - Val 20 Square - Val 21 Triangle - Val 22 Sine - Val 23 Sawtooth up - Val 24 Sawtooth down - Val 40 Spring (Force = f(pos)) - Val 41 Friction (Force = f(velocity)) and Inertia (Force = f(acceleration)) - - -02 Axes affected and trigger - Bits 4-7: Val 2 = effect along one axis. Byte 05 indicates direction - Val 4 = X axis only. Byte 05 must contain 5a - Val 8 = Y axis only. Byte 05 must contain b4 - Val c = X and Y axes. Bytes 05 must contain 60 - Bits 0-3: Val 0 = No trigger - Val x+1 = Button x triggers the effect - When the whole byte is 0, cancel the previously set trigger - -03-04 Duration of effect (little endian encoding, in ms) - -05 Direction of effect, if applicable. Else, see 02 for value to assign. - -06-07 Minimum time between triggering. - -08-09 Address of periodicity or magnitude parameters -0a-0b Address of attack and fade parameters, or ffff if none. -*or* -08-09 Address of interactive parameters for X-axis, or ffff if not applicable -0a-0b Address of interactive parameters for Y-axis, or ffff if not applicable - -0c-0d Delay before execution of effect (little endian encoding, in ms) - - -** Time based parameters ** - -*** Attack and fade *** -OP= 02 -LEN= 08 -00-01 Address where to store the parameters -02-03 Duration of attack (little endian encoding, in ms) -04 Level at end of attack. Signed byte. -05-06 Duration of fade. -07 Level at end of fade. - -*** Magnitude *** -OP= 03 -LEN= 03 -00-01 Address -02 Level. Signed byte. - -*** Periodicity *** -OP= 04 -LEN= 07 -00-01 Address -02 Magnitude. Signed byte. -03 Offset. Signed byte. -04 Phase. Val 00 = 0 deg, Val 40 = 90 degs. -05-06 Period (little endian encoding, in ms) - -** Interactive parameters ** -OP= 05 -LEN= 0a -00-01 Address -02 Positive Coeff -03 Negative Coeff -04+05 Offset (center) -06+07 Dead band (Val 01F4 = 5000 (decimal)) -08 Positive saturation (Val 0a = 1000 (decimal) Val 64 = 10000 (decimal)) -09 Negative saturation - -The encoding is a bit funny here: For coeffs, these are signed values. The -maximum value is 64 (100 decimal), the min is 9c. -For the offset, the minimum value is FE0C, the maximum value is 01F4. -For the deadband, the minimum value is 0, the max is 03E8. - -** Controls ** -OP= 41 -LEN= 03 -00 Channel -01 Start/Stop - Val 00: Stop - Val 01: Start and play once. - Val 41: Start and play n times (See byte 02 below) -02 Number of iterations n. - -** Init ** - -*** Querying features *** -OP= ff -Query command. Length varies according to the query type. -The general format of this packet is: -ff 01 QUERY [INDEX] CHECKSUM -responses are of the same form: -FF LEN QUERY VALUE_QUERIED CHECKSUM2 -where LEN = 1 + length(VALUE_QUERIED) - -**** Query ram size **** -QUERY = 42 ('B'uffer size) -The device should reply with the same packet plus two additional bytes -containing the size of the memory: -ff 03 42 03 e8 CS would mean that the device has 1000 bytes of ram available. - -**** Query number of effects **** -QUERY = 4e ('N'umber of effects) -The device should respond by sending the number of effects that can be played -at the same time (one byte) -ff 02 4e 14 CS would stand for 20 effects. - -**** Vendor's id **** -QUERY = 4d ('M'anufacturer) -Query the vendors'id (2 bytes) - -**** Product id ***** -QUERY = 50 ('P'roduct) -Query the product id (2 bytes) - -**** Open device **** -QUERY = 4f ('O'pen) -No data returned. - -**** Close device ***** -QUERY = 43 ('C')lose -No data returned. - -**** Query effect **** -QUERY = 45 ('E') -Send effect type. -Returns nonzero if supported (2 bytes) - -**** Firmware Version **** -QUERY = 56 ('V'ersion) -Sends back 3 bytes - major, minor, subminor - -*** Initialisation of the device *** - -**** Set Control **** -!!! Device dependent, can be different on different models !!! -OP= 40 <idx> <val> [<val>] -LEN= 2 or 3 -00 Idx - Idx 00 Set dead zone (0..2048) - Idx 01 Ignore Deadman sensor (0..1) - Idx 02 Enable comm watchdog (0..1) - Idx 03 Set the strength of the spring (0..100) - Idx 04 Enable or disable the spring (0/1) - Idx 05 Set axis saturation threshold (0..2048) - -**** Set Effect State **** -OP= 42 <val> -LEN= 1 -00 State - Bit 3 Pause force feedback - Bit 2 Enable force feedback - Bit 0 Stop all effects - -**** Set overall gain **** -OP= 43 <val> -LEN= 1 -00 Gain - Val 00 = 0% - Val 40 = 50% - Val 80 = 100% - -** Parameter memory ** - -Each device has a certain amount of memory to store parameters of effects. -The amount of RAM may vary, I encountered values from 200 to 1000 bytes. Below -is the amount of memory apparently needed for every set of parameters: - - period : 0c - - magnitude : 02 - - attack and fade : 0e - - interactive : 08 - -** Appendix: How to study the protocol ? ** - -1. Generate effects using the force editor provided with the DirectX SDK, or -use Immersion Studio (freely available at their web site in the developer section: -www.immersion.com) -2. Start a soft spying RS232 or USB (depending on where you connected your -joystick/wheel). I used ComPortSpy from fCoder (alpha version!) -3. Play the effect, and watch what happens on the spy screen. - -A few words about ComPortSpy: -At first glance, this software seems, hum, well... buggy. In fact, data appear with a -few seconds latency. Personally, I restart it every time I play an effect. -Remember it's free (as in free beer) and alpha! - -** URLS ** -Check www.immerse.com for Immersion Studio, and www.fcoder.com for ComPortSpy. - -** Author of this document ** -Johann Deneux <johann.deneux@gmail.com> -Home page at http://web.archive.org/web/*/http://www.esil.univ-mrs.fr - -Additions by Vojtech Pavlik. - -I-Force is trademark of Immersion Corp. diff --git a/Documentation/input/index.rst b/Documentation/input/index.rst new file mode 100644 index 000000000000..7a3e71c2bd00 --- /dev/null +++ b/Documentation/input/index.rst @@ -0,0 +1,20 @@ +============================= +The Linux Input Documentation +============================= + +Contents: + +.. toctree:: + :maxdepth: 2 + :numbered: + + input_uapi + input_kapi + devices/index + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/input/input-programming.txt b/Documentation/input/input-programming.rst index c3b940baba42..45a4c6e05e39 100644 --- a/Documentation/input/input-programming.txt +++ b/Documentation/input/input-programming.rst @@ -1,77 +1,75 @@ -Programming input drivers -~~~~~~~~~~~~~~~~~~~~~~~~~ +=============================== +Creating an input device driver +=============================== -1. Creating an input device driver -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -1.0 The simplest example -~~~~~~~~~~~~~~~~~~~~~~~~ +The simplest example +~~~~~~~~~~~~~~~~~~~~ Here comes a very simple example of an input device driver. The device has just one button and the button is accessible at i/o port BUTTON_PORT. When -pressed or released a BUTTON_IRQ happens. The driver could look like: - -#include <linux/input.h> -#include <linux/module.h> -#include <linux/init.h> - -#include <asm/irq.h> -#include <asm/io.h> - -static struct input_dev *button_dev; - -static irqreturn_t button_interrupt(int irq, void *dummy) -{ - input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1); - input_sync(button_dev); - return IRQ_HANDLED; -} - -static int __init button_init(void) -{ - int error; - - if (request_irq(BUTTON_IRQ, button_interrupt, 0, "button", NULL)) { - printk(KERN_ERR "button.c: Can't allocate irq %d\n", button_irq); - return -EBUSY; - } - - button_dev = input_allocate_device(); - if (!button_dev) { - printk(KERN_ERR "button.c: Not enough memory\n"); - error = -ENOMEM; - goto err_free_irq; - } - - button_dev->evbit[0] = BIT_MASK(EV_KEY); - button_dev->keybit[BIT_WORD(BTN_0)] = BIT_MASK(BTN_0); - - error = input_register_device(button_dev); - if (error) { - printk(KERN_ERR "button.c: Failed to register device\n"); - goto err_free_dev; - } - - return 0; - - err_free_dev: - input_free_device(button_dev); - err_free_irq: - free_irq(BUTTON_IRQ, button_interrupt); - return error; -} - -static void __exit button_exit(void) -{ - input_unregister_device(button_dev); - free_irq(BUTTON_IRQ, button_interrupt); -} - -module_init(button_init); -module_exit(button_exit); - -1.1 What the example does -~~~~~~~~~~~~~~~~~~~~~~~~~ +pressed or released a BUTTON_IRQ happens. The driver could look like:: + + #include <linux/input.h> + #include <linux/module.h> + #include <linux/init.h> + + #include <asm/irq.h> + #include <asm/io.h> + + static struct input_dev *button_dev; + + static irqreturn_t button_interrupt(int irq, void *dummy) + { + input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1); + input_sync(button_dev); + return IRQ_HANDLED; + } + + static int __init button_init(void) + { + int error; + + if (request_irq(BUTTON_IRQ, button_interrupt, 0, "button", NULL)) { + printk(KERN_ERR "button.c: Can't allocate irq %d\n", button_irq); + return -EBUSY; + } + + button_dev = input_allocate_device(); + if (!button_dev) { + printk(KERN_ERR "button.c: Not enough memory\n"); + error = -ENOMEM; + goto err_free_irq; + } + + button_dev->evbit[0] = BIT_MASK(EV_KEY); + button_dev->keybit[BIT_WORD(BTN_0)] = BIT_MASK(BTN_0); + + error = input_register_device(button_dev); + if (error) { + printk(KERN_ERR "button.c: Failed to register device\n"); + goto err_free_dev; + } + + return 0; + + err_free_dev: + input_free_device(button_dev); + err_free_irq: + free_irq(BUTTON_IRQ, button_interrupt); + return error; + } + + static void __exit button_exit(void) + { + input_unregister_device(button_dev); + free_irq(BUTTON_IRQ, button_interrupt); + } + + module_init(button_init); + module_exit(button_exit); + +What the example does +~~~~~~~~~~~~~~~~~~~~~ First it has to include the <linux/input.h> file, which interfaces to the input subsystem. This provides all the definitions needed. @@ -85,7 +83,7 @@ and sets up input bitfields. This way the device driver tells the other parts of the input systems what it is - what events can be generated or accepted by this input device. Our example device can only generate EV_KEY type events, and from those only BTN_0 event code. Thus we only set these -two bits. We could have used +two bits. We could have used:: set_bit(EV_KEY, button_dev.evbit); set_bit(BTN_0, button_dev.keybit); @@ -93,7 +91,7 @@ two bits. We could have used as well, but with more than single bits the first approach tends to be shorter. -Then the example driver registers the input device structure by calling +Then the example driver registers the input device structure by calling:: input_register_device(&button_dev); @@ -102,12 +100,12 @@ calls device handler modules _connect functions to tell them a new input device has appeared. input_register_device() may sleep and therefore must not be called from an interrupt or with a spinlock held. -While in use, the only used function of the driver is +While in use, the only used function of the driver is:: button_interrupt() which upon every interrupt from the button checks its state and reports it -via the +via the:: input_report_key() @@ -116,7 +114,7 @@ routine isn't reporting two same value events (press, press for example) to the input system, because the input_report_* functions check that themselves. -Then there is the +Then there is the:: input_sync() @@ -125,38 +123,38 @@ This doesn't seem important in the one button case, but is quite important for for example mouse movement, where you don't want the X and Y values to be interpreted separately, because that'd result in a different movement. -1.2 dev->open() and dev->close() -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +dev->open() and dev->close() +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In case the driver has to repeatedly poll the device, because it doesn't have an interrupt coming from it and the polling is too expensive to be done all the time, or if the device uses a valuable resource (eg. interrupt), it can use the open and close callback to know when it can stop polling or release the interrupt and when it must resume polling or grab the interrupt -again. To do that, we would add this to our example driver: - -static int button_open(struct input_dev *dev) -{ - if (request_irq(BUTTON_IRQ, button_interrupt, 0, "button", NULL)) { - printk(KERN_ERR "button.c: Can't allocate irq %d\n", button_irq); - return -EBUSY; - } - - return 0; -} - -static void button_close(struct input_dev *dev) -{ - free_irq(IRQ_AMIGA_VERTB, button_interrupt); -} - -static int __init button_init(void) -{ - ... - button_dev->open = button_open; - button_dev->close = button_close; - ... -} +again. To do that, we would add this to our example driver:: + + static int button_open(struct input_dev *dev) + { + if (request_irq(BUTTON_IRQ, button_interrupt, 0, "button", NULL)) { + printk(KERN_ERR "button.c: Can't allocate irq %d\n", button_irq); + return -EBUSY; + } + + return 0; + } + + static void button_close(struct input_dev *dev) + { + free_irq(IRQ_AMIGA_VERTB, button_interrupt); + } + + static int __init button_init(void) + { + ... + button_dev->open = button_open; + button_dev->close = button_close; + ... + } Note that input core keeps track of number of users for the device and makes sure that dev->open() is called only when the first user connects @@ -166,11 +164,11 @@ disconnects. Calls to both callbacks are serialized. The open() callback should return a 0 in case of success or any nonzero value in case of failure. The close() callback (which is void) must always succeed. -1.3 Basic event types -~~~~~~~~~~~~~~~~~~~~~ +Basic event types +~~~~~~~~~~~~~~~~~ The most simple event type is EV_KEY, which is used for keys and buttons. -It's reported to the input system via: +It's reported to the input system via:: input_report_key(struct input_dev *dev, int code, int value) @@ -188,7 +186,7 @@ events are namely for joysticks and digitizers - devices that do work in an absolute coordinate systems. Having the device report EV_REL buttons is as simple as with EV_KEY, simply -set the corresponding bits and call the +set the corresponding bits and call the:: input_report_rel(struct input_dev *dev, int code, int value) @@ -197,14 +195,14 @@ function. Events are generated only for nonzero value. However EV_ABS requires a little special care. Before calling input_register_device, you have to fill additional fields in the input_dev struct for each absolute axis your device has. If our button device had also -the ABS_X axis: +the ABS_X axis:: button_dev.absmin[ABS_X] = 0; button_dev.absmax[ABS_X] = 255; button_dev.absfuzz[ABS_X] = 4; button_dev.absflat[ABS_X] = 8; -Or, you can just say: +Or, you can just say:: input_set_abs_params(button_dev, ABS_X, 0, 255, 4, 8); @@ -218,18 +216,18 @@ If you don't need absfuzz and absflat, you can set them to zero, which mean that the thing is precise and always returns to exactly the center position (if it has any). -1.4 BITS_TO_LONGS(), BIT_WORD(), BIT_MASK() -~~~~~~~~~~~~~~~~~~~~~~~~~~ +BITS_TO_LONGS(), BIT_WORD(), BIT_MASK() +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -These three macros from bitops.h help some bitfield computations: +These three macros from bitops.h help some bitfield computations:: BITS_TO_LONGS(x) - returns the length of a bitfield array in longs for x bits BIT_WORD(x) - returns the index in the array in longs for bit x BIT_MASK(x) - returns the index in a long for bit x -1.5 The id* and name fields -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The id* and name fields +~~~~~~~~~~~~~~~~~~~~~~~ The dev->name should be set before registering the input device by the input device driver. It's a string like 'Generic button device' containing a @@ -245,8 +243,8 @@ driver. The id and name fields can be passed to userland via the evdev interface. -1.6 The keycode, keycodemax, keycodesize fields -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The keycode, keycodemax, keycodesize fields +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ These three fields should be used by input devices that have dense keymaps. The keycode is an array used to map from scancodes to input system keycodes. @@ -259,14 +257,15 @@ When a device has all 3 aforementioned fields filled in, the driver may rely on kernel's default implementation of setting and querying keycode mappings. -1.7 dev->getkeycode() and dev->setkeycode() -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +dev->getkeycode() and dev->setkeycode() +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + getkeycode() and setkeycode() callbacks allow drivers to override default keycode/keycodesize/keycodemax mapping mechanism provided by input core and implement sparse keycode maps. -1.8 Key autorepeat -~~~~~~~~~~~~~~~~~~ +Key autorepeat +~~~~~~~~~~~~~~ ... is simple. It is handled by the input.c module. Hardware autorepeat is not used, because it's not present in many devices and even where it is @@ -274,29 +273,30 @@ present, it is broken sometimes (at keyboards: Toshiba notebooks). To enable autorepeat for your device, just set EV_REP in dev->evbit. All will be handled by the input system. -1.9 Other event types, handling output events -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Other event types, handling output events +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The other event types up to now are: -EV_LED - used for the keyboard LEDs. -EV_SND - used for keyboard beeps. +- EV_LED - used for the keyboard LEDs. +- EV_SND - used for keyboard beeps. They are very similar to for example key events, but they go in the other direction - from the system to the input device driver. If your input device driver can handle these events, it has to set the respective bits in evbit, -*and* also the callback routine: - - button_dev->event = button_event; - -int button_event(struct input_dev *dev, unsigned int type, unsigned int code, int value); -{ - if (type == EV_SND && code == SND_BELL) { - outb(value, BUTTON_BELL); - return 0; - } - return -1; -} +*and* also the callback routine:: + + button_dev->event = button_event; + + int button_event(struct input_dev *dev, unsigned int type, + unsigned int code, int value) + { + if (type == EV_SND && code == SND_BELL) { + outb(value, BUTTON_BELL); + return 0; + } + return -1; + } This callback routine can be called from an interrupt or a BH (although that isn't a rule), and thus must not sleep, and must not take too long to finish. diff --git a/Documentation/input/input.rst b/Documentation/input/input.rst new file mode 100644 index 000000000000..3b3a22975106 --- /dev/null +++ b/Documentation/input/input.rst @@ -0,0 +1,281 @@ +.. include:: <isonum.txt> + +============ +Introduction +============ + +:Copyright: |copy| 1999-2001 Vojtech Pavlik <vojtech@ucw.cz> - Sponsored by SuSE + +Architecture +============ + +Input subsystem a collection of drivers that is designed to support +all input devices under Linux. Most of the drivers reside in +drivers/input, although quite a few live in drivers/hid and +drivers/platform. + +The core of the input subsystem is the input module, which must be +loaded before any other of the input modules - it serves as a way of +communication between two groups of modules: + +Device drivers +-------------- + +These modules talk to the hardware (for example via USB), and provide +events (keystrokes, mouse movements) to the input module. + +Event handlers +-------------- + +These modules get events from input core and pass them where needed +via various interfaces - keystrokes to the kernel, mouse movements via +a simulated PS/2 interface to GPM and X, and so on. + +Simple Usage +============ + +For the most usual configuration, with one USB mouse and one USB keyboard, +you'll have to load the following modules (or have them built in to the +kernel):: + + input + mousedev + usbcore + uhci_hcd or ohci_hcd or ehci_hcd + usbhid + hid_generic + +After this, the USB keyboard will work straight away, and the USB mouse +will be available as a character device on major 13, minor 63:: + + crw-r--r-- 1 root root 13, 63 Mar 28 22:45 mice + +This device usually created automatically by the system. The commands +to create it by hand are:: + + cd /dev + mkdir input + mknod input/mice c 13 63 + +After that you have to point GPM (the textmode mouse cut&paste tool) and +XFree to this device to use it - GPM should be called like:: + + gpm -t ps2 -m /dev/input/mice + +And in X:: + + Section "Pointer" + Protocol "ImPS/2" + Device "/dev/input/mice" + ZAxisMapping 4 5 + EndSection + +When you do all of the above, you can use your USB mouse and keyboard. + +Detailed Description +==================== + +Event handlers +-------------- + +Event handlers distribute the events from the devices to userspace and +in-kernel consumers, as needed. + +evdev +~~~~~ + +``evdev`` is the generic input event interface. It passes the events +generated in the kernel straight to the program, with timestamps. The +event codes are the same on all architectures and are hardware +independent. + +This is the preferred interface for userspace to consume user +input, and all clients are encouraged to use it. + +See :ref:`event-interface` for notes on API. + +The devices are in /dev/input:: + + crw-r--r-- 1 root root 13, 64 Apr 1 10:49 event0 + crw-r--r-- 1 root root 13, 65 Apr 1 10:50 event1 + crw-r--r-- 1 root root 13, 66 Apr 1 10:50 event2 + crw-r--r-- 1 root root 13, 67 Apr 1 10:50 event3 + ... + +There are two ranges of minors: 64 through 95 is the static legacy +range. If there are more than 32 input devices in a system, additional +evdev nodes are created with minors starting with 256. + +keyboard +~~~~~~~~ + +``keyboard`` is in-kernel input handler ad is a part of VT code. It +consumes keyboard keystrokes and handles user input for VT consoles. + +mousedev +~~~~~~~~ + +``mousedev`` is a hack to make legacy programs that use mouse input +work. It takes events from either mice or digitizers/tablets and makes +a PS/2-style (a la /dev/psaux) mouse device available to the +userland. + +Mousedev devices in /dev/input (as shown above) are:: + + crw-r--r-- 1 root root 13, 32 Mar 28 22:45 mouse0 + crw-r--r-- 1 root root 13, 33 Mar 29 00:41 mouse1 + crw-r--r-- 1 root root 13, 34 Mar 29 00:41 mouse2 + crw-r--r-- 1 root root 13, 35 Apr 1 10:50 mouse3 + ... + ... + crw-r--r-- 1 root root 13, 62 Apr 1 10:50 mouse30 + crw-r--r-- 1 root root 13, 63 Apr 1 10:50 mice + +Each ``mouse`` device is assigned to a single mouse or digitizer, except +the last one - ``mice``. This single character device is shared by all +mice and digitizers, and even if none are connected, the device is +present. This is useful for hotplugging USB mice, so that older programs +that do not handle hotplug can open the device even when no mice are +present. + +CONFIG_INPUT_MOUSEDEV_SCREEN_[XY] in the kernel configuration are +the size of your screen (in pixels) in XFree86. This is needed if you +want to use your digitizer in X, because its movement is sent to X +via a virtual PS/2 mouse and thus needs to be scaled +accordingly. These values won't be used if you use a mouse only. + +Mousedev will generate either PS/2, ImPS/2 (Microsoft IntelliMouse) or +ExplorerPS/2 (IntelliMouse Explorer) protocols, depending on what the +program reading the data wishes. You can set GPM and X to any of +these. You'll need ImPS/2 if you want to make use of a wheel on a USB +mouse and ExplorerPS/2 if you want to use extra (up to 5) buttons. + +joydev +~~~~~~ + +``joydev`` implements v0.x and v1.x Linux joystick API. See +:ref:`joystick-api` for details. + +As soon as any joystick is connected, it can be accessed in /dev/input on:: + + crw-r--r-- 1 root root 13, 0 Apr 1 10:50 js0 + crw-r--r-- 1 root root 13, 1 Apr 1 10:50 js1 + crw-r--r-- 1 root root 13, 2 Apr 1 10:50 js2 + crw-r--r-- 1 root root 13, 3 Apr 1 10:50 js3 + ... + +And so on up to js31 in legacy range, and additional nodes with minors +above 256 if there are more joystick devices. + +Device drivers +-------------- + +Device drivers are the modules that generate events. + +hid-generic +~~~~~~~~~~~ + +``hid-generic`` is one of the largest and most complex driver of the +whole suite. It handles all HID devices, and because there is a very +wide variety of them, and because the USB HID specification isn't +simple, it needs to be this big. + +Currently, it handles USB mice, joysticks, gamepads, steering wheels +keyboards, trackballs and digitizers. + +However, USB uses HID also for monitor controls, speaker controls, UPSs, +LCDs and many other purposes. + +The monitor and speaker controls should be easy to add to the hid/input +interface, but for the UPSs and LCDs it doesn't make much sense. For this, +the hiddev interface was designed. See Documentation/hid/hiddev.txt +for more information about it. + +The usage of the usbhid module is very simple, it takes no parameters, +detects everything automatically and when a HID device is inserted, it +detects it appropriately. + +However, because the devices vary wildly, you might happen to have a +device that doesn't work well. In that case #define DEBUG at the beginning +of hid-core.c and send me the syslog traces. + +usbmouse +~~~~~~~~ + +For embedded systems, for mice with broken HID descriptors and just any +other use when the big usbhid wouldn't be a good choice, there is the +usbmouse driver. It handles USB mice only. It uses a simpler HIDBP +protocol. This also means the mice must support this simpler protocol. Not +all do. If you don't have any strong reason to use this module, use usbhid +instead. + +usbkbd +~~~~~~ + +Much like usbmouse, this module talks to keyboards with a simplified +HIDBP protocol. It's smaller, but doesn't support any extra special keys. +Use usbhid instead if there isn't any special reason to use this. + +psmouse +~~~~~~~ + +This is driver for all flavors of pointing devices using PS/2 +protocol, including Synaptics and ALPS touchpads, Intellimouse +Explorer devices, Logitech PS/2 mice and so on. + +atkbd +~~~~~ + +This is driver for PS/2 (AT) keyboards. + +iforce +~~~~~~ + +A driver for I-Force joysticks and wheels, both over USB and RS232. +It includes Force Feedback support now, even though Immersion +Corp. considers the protocol a trade secret and won't disclose a word +about it. + +Verifying if it works +===================== + +Typing a couple keys on the keyboard should be enough to check that +a keyboard works and is correctly connected to the kernel keyboard +driver. + +Doing a ``cat /dev/input/mouse0`` (c, 13, 32) will verify that a mouse +is also emulated; characters should appear if you move it. + +You can test the joystick emulation with the ``jstest`` utility, +available in the joystick package (see :ref:`joystick-doc`). + +You can test the event devices with the ``evtest`` utility. + +.. _event-interface: + +Event interface +=============== + +You can use blocking and nonblocking reads, and also select() on the +/dev/input/eventX devices, and you'll always get a whole number of input +events on a read. Their layout is:: + + struct input_event { + struct timeval time; + unsigned short type; + unsigned short code; + unsigned int value; + }; + +``time`` is the timestamp, it returns the time at which the event happened. +Type is for example EV_REL for relative moment, EV_KEY for a keypress or +release. More types are defined in include/uapi/linux/input-event-codes.h. + +``code`` is event code, for example REL_X or KEY_BACKSPACE, again a complete +list is in include/uapi/linux/input-event-codes.h. + +``value`` is the value the event carries. Either a relative change for +EV_REL, absolute new value for EV_ABS (joysticks ...), or 0 for EV_KEY for +release, 1 for keypress and 2 for autorepeat. + +See :ref:`input-event-codes` for more information about various even codes. diff --git a/Documentation/input/input.txt b/Documentation/input/input.txt deleted file mode 100644 index 7ebce100fe90..000000000000 --- a/Documentation/input/input.txt +++ /dev/null @@ -1,290 +0,0 @@ - Linux Input drivers v1.0 - (c) 1999-2001 Vojtech Pavlik <vojtech@ucw.cz> - Sponsored by SuSE ----------------------------------------------------------------------------- - -0. Disclaimer -~~~~~~~~~~~~~ - This program is free software; you can redistribute it and/or modify it -under the terms of the GNU General Public License as published by the Free -Software Foundation; either version 2 of the License, or (at your option) -any later version. - - This program is distributed in the hope that it will be useful, but -WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -more details. - - You should have received a copy of the GNU General Public License along -with this program; if not, write to the Free Software Foundation, Inc., 59 -Temple Place, Suite 330, Boston, MA 02111-1307 USA - - Should you need to contact me, the author, you can do so either by e-mail -- mail your message to <vojtech@ucw.cz>, or by paper mail: Vojtech Pavlik, -Simunkova 1594, Prague 8, 182 00 Czech Republic - - For your convenience, the GNU General Public License version 2 is included -in the package: See the file COPYING. - -1. Introduction -~~~~~~~~~~~~~~~ - This is a collection of drivers that is designed to support all input -devices under Linux. While it is currently used only on for USB input -devices, future use (say 2.5/2.6) is expected to expand to replace -most of the existing input system, which is why it lives in -drivers/input/ instead of drivers/usb/. - - The centre of the input drivers is the input module, which must be -loaded before any other of the input modules - it serves as a way of -communication between two groups of modules: - -1.1 Device drivers -~~~~~~~~~~~~~~~~~~ - These modules talk to the hardware (for example via USB), and provide -events (keystrokes, mouse movements) to the input module. - -1.2 Event handlers -~~~~~~~~~~~~~~~~~~ - These modules get events from input and pass them where needed via -various interfaces - keystrokes to the kernel, mouse movements via a -simulated PS/2 interface to GPM and X and so on. - -2. Simple Usage -~~~~~~~~~~~~~~~ - For the most usual configuration, with one USB mouse and one USB keyboard, -you'll have to load the following modules (or have them built in to the -kernel): - - input - mousedev - keybdev - usbcore - uhci_hcd or ohci_hcd or ehci_hcd - usbhid - - After this, the USB keyboard will work straight away, and the USB mouse -will be available as a character device on major 13, minor 63: - - crw-r--r-- 1 root root 13, 63 Mar 28 22:45 mice - - This device has to be created. - The commands to create it by hand are: - - cd /dev - mkdir input - mknod input/mice c 13 63 - - After that you have to point GPM (the textmode mouse cut&paste tool) and -XFree to this device to use it - GPM should be called like: - - gpm -t ps2 -m /dev/input/mice - - And in X: - - Section "Pointer" - Protocol "ImPS/2" - Device "/dev/input/mice" - ZAxisMapping 4 5 - EndSection - - When you do all of the above, you can use your USB mouse and keyboard. - -3. Detailed Description -~~~~~~~~~~~~~~~~~~~~~~~ -3.1 Device drivers -~~~~~~~~~~~~~~~~~~ - Device drivers are the modules that generate events. The events are -however not useful without being handled, so you also will need to use some -of the modules from section 3.2. - -3.1.1 usbhid -~~~~~~~~~~~~ - usbhid is the largest and most complex driver of the whole suite. It -handles all HID devices, and because there is a very wide variety of them, -and because the USB HID specification isn't simple, it needs to be this big. - - Currently, it handles USB mice, joysticks, gamepads, steering wheels -keyboards, trackballs and digitizers. - - However, USB uses HID also for monitor controls, speaker controls, UPSs, -LCDs and many other purposes. - - The monitor and speaker controls should be easy to add to the hid/input -interface, but for the UPSs and LCDs it doesn't make much sense. For this, -the hiddev interface was designed. See Documentation/hid/hiddev.txt -for more information about it. - - The usage of the usbhid module is very simple, it takes no parameters, -detects everything automatically and when a HID device is inserted, it -detects it appropriately. - - However, because the devices vary wildly, you might happen to have a -device that doesn't work well. In that case #define DEBUG at the beginning -of hid-core.c and send me the syslog traces. - -3.1.2 usbmouse -~~~~~~~~~~~~~~ - For embedded systems, for mice with broken HID descriptors and just any -other use when the big usbhid wouldn't be a good choice, there is the -usbmouse driver. It handles USB mice only. It uses a simpler HIDBP -protocol. This also means the mice must support this simpler protocol. Not -all do. If you don't have any strong reason to use this module, use usbhid -instead. - -3.1.3 usbkbd -~~~~~~~~~~~~ - Much like usbmouse, this module talks to keyboards with a simplified -HIDBP protocol. It's smaller, but doesn't support any extra special keys. -Use usbhid instead if there isn't any special reason to use this. - -3.1.4 wacom -~~~~~~~~~~~ - This is a driver for Wacom Graphire and Intuos tablets. Not for Wacom -PenPartner, that one is handled by the HID driver. Although the Intuos and -Graphire tablets claim that they are HID tablets as well, they are not and -thus need this specific driver. - -3.1.5 iforce -~~~~~~~~~~~~ - A driver for I-Force joysticks and wheels, both over USB and RS232. -It includes ForceFeedback support now, even though Immersion -Corp. considers the protocol a trade secret and won't disclose a word -about it. - -3.2 Event handlers -~~~~~~~~~~~~~~~~~~ - Event handlers distribute the events from the devices to userland and -kernel, as needed. - -3.2.1 keybdev -~~~~~~~~~~~~~ - keybdev is currently a rather ugly hack that translates the input -events into architecture-specific keyboard raw mode (Xlated AT Set2 on -x86), and passes them into the handle_scancode function of the -keyboard.c module. This works well enough on all architectures that -keybdev can generate rawmode on, other architectures can be added to -it. - - The right way would be to pass the events to keyboard.c directly, -best if keyboard.c would itself be an event handler. This is done in -the input patch, available on the webpage mentioned below. - -3.2.2 mousedev -~~~~~~~~~~~~~~ - mousedev is also a hack to make programs that use mouse input -work. It takes events from either mice or digitizers/tablets and makes -a PS/2-style (a la /dev/psaux) mouse device available to the -userland. Ideally, the programs could use a more reasonable interface, -for example evdev - - Mousedev devices in /dev/input (as shown above) are: - - crw-r--r-- 1 root root 13, 32 Mar 28 22:45 mouse0 - crw-r--r-- 1 root root 13, 33 Mar 29 00:41 mouse1 - crw-r--r-- 1 root root 13, 34 Mar 29 00:41 mouse2 - crw-r--r-- 1 root root 13, 35 Apr 1 10:50 mouse3 - ... - ... - crw-r--r-- 1 root root 13, 62 Apr 1 10:50 mouse30 - crw-r--r-- 1 root root 13, 63 Apr 1 10:50 mice - -Each 'mouse' device is assigned to a single mouse or digitizer, except -the last one - 'mice'. This single character device is shared by all -mice and digitizers, and even if none are connected, the device is -present. This is useful for hotplugging USB mice, so that programs -can open the device even when no mice are present. - - CONFIG_INPUT_MOUSEDEV_SCREEN_[XY] in the kernel configuration are -the size of your screen (in pixels) in XFree86. This is needed if you -want to use your digitizer in X, because its movement is sent to X -via a virtual PS/2 mouse and thus needs to be scaled -accordingly. These values won't be used if you use a mouse only. - - Mousedev will generate either PS/2, ImPS/2 (Microsoft IntelliMouse) or -ExplorerPS/2 (IntelliMouse Explorer) protocols, depending on what the -program reading the data wishes. You can set GPM and X to any of -these. You'll need ImPS/2 if you want to make use of a wheel on a USB -mouse and ExplorerPS/2 if you want to use extra (up to 5) buttons. - -3.2.3 joydev -~~~~~~~~~~~~ - Joydev implements v0.x and v1.x Linux joystick api, much like -drivers/char/joystick/joystick.c used to in earlier versions. See -joystick-api.txt in the Documentation subdirectory for details. As -soon as any joystick is connected, it can be accessed in /dev/input -on: - - crw-r--r-- 1 root root 13, 0 Apr 1 10:50 js0 - crw-r--r-- 1 root root 13, 1 Apr 1 10:50 js1 - crw-r--r-- 1 root root 13, 2 Apr 1 10:50 js2 - crw-r--r-- 1 root root 13, 3 Apr 1 10:50 js3 - ... - -And so on up to js31. - -3.2.4 evdev -~~~~~~~~~~~ - evdev is the generic input event interface. It passes the events -generated in the kernel straight to the program, with timestamps. The -API is still evolving, but should be usable now. It's described in -section 5. - - This should be the way for GPM and X to get keyboard and mouse -events. It allows for multihead in X without any specific multihead -kernel support. The event codes are the same on all architectures and -are hardware independent. - - The devices are in /dev/input: - - crw-r--r-- 1 root root 13, 64 Apr 1 10:49 event0 - crw-r--r-- 1 root root 13, 65 Apr 1 10:50 event1 - crw-r--r-- 1 root root 13, 66 Apr 1 10:50 event2 - crw-r--r-- 1 root root 13, 67 Apr 1 10:50 event3 - ... - -And so on up to event31. - -4. Verifying if it works -~~~~~~~~~~~~~~~~~~~~~~~~ - Typing a couple keys on the keyboard should be enough to check that -a USB keyboard works and is correctly connected to the kernel keyboard -driver. - - Doing a "cat /dev/input/mouse0" (c, 13, 32) will verify that a mouse -is also emulated; characters should appear if you move it. - - You can test the joystick emulation with the 'jstest' utility, -available in the joystick package (see Documentation/input/joystick.txt). - - You can test the event devices with the 'evtest' utility available -in the LinuxConsole project CVS archive (see the URL below). - -5. Event interface -~~~~~~~~~~~~~~~~~~ - Should you want to add event device support into any application (X, gpm, -svgalib ...) I <vojtech@ucw.cz> will be happy to provide you any help I -can. Here goes a description of the current state of things, which is going -to be extended, but not changed incompatibly as time goes: - - You can use blocking and nonblocking reads, also select() on the -/dev/input/eventX devices, and you'll always get a whole number of input -events on a read. Their layout is: - -struct input_event { - struct timeval time; - unsigned short type; - unsigned short code; - unsigned int value; -}; - - 'time' is the timestamp, it returns the time at which the event happened. -Type is for example EV_REL for relative moment, EV_KEY for a keypress or -release. More types are defined in include/uapi/linux/input-event-codes.h. - - 'code' is event code, for example REL_X or KEY_BACKSPACE, again a complete -list is in include/uapi/linux/input-event-codes.h. - - 'value' is the value the event carries. Either a relative change for -EV_REL, absolute new value for EV_ABS (joysticks ...), or 0 for EV_KEY for -release, 1 for keypress and 2 for autorepeat. - diff --git a/Documentation/input/input_kapi.rst b/Documentation/input/input_kapi.rst new file mode 100644 index 000000000000..41f1b7e6b78e --- /dev/null +++ b/Documentation/input/input_kapi.rst @@ -0,0 +1,17 @@ +.. include:: <isonum.txt> + +################################ +Linux Input Subsystem kernel API +################################ + +.. class:: toc-title + + Table of Contents + +.. toctree:: + :maxdepth: 2 + :numbered: + + input-programming + gameport-programming + notifier diff --git a/Documentation/input/input_uapi.rst b/Documentation/input/input_uapi.rst new file mode 100644 index 000000000000..4a0391609327 --- /dev/null +++ b/Documentation/input/input_uapi.rst @@ -0,0 +1,22 @@ +.. include:: <isonum.txt> + +################################### +Linux Input Subsystem userspace API +################################### + +.. class:: toc-title + + Table of Contents + +.. toctree:: + :maxdepth: 2 + :numbered: + + input + event-codes + multi-touch-protocol + gamepad + ff + joydev/index + uinput + userio diff --git a/Documentation/input/interactive.fig b/Documentation/input/interactive.fig deleted file mode 100644 index 1e7de387723a..000000000000 --- a/Documentation/input/interactive.fig +++ /dev/null @@ -1,42 +0,0 @@ -#FIG 3.2 -Landscape -Center -Inches -Letter -100.00 -Single --2 -1200 2 -2 1 0 2 0 7 50 0 -1 6.000 0 0 -1 0 0 6 - 1200 3600 1800 3600 2400 4800 3000 4800 4200 5700 4800 5700 -2 2 0 1 0 7 50 0 -1 4.000 0 0 -1 0 0 5 - 1200 3150 4800 3150 4800 6300 1200 6300 1200 3150 -2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2 - 1200 4800 4800 4800 -2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 4 - 2400 4800 2400 6525 1950 7125 1950 7800 -2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 4 - 3000 4800 3000 6525 3600 7125 3600 7800 -2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 0 1 3 - 0 0 1.00 60.00 120.00 - 3825 5400 4125 5100 5400 5100 -2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 0 1 3 - 0 0 1.00 60.00 120.00 - 2100 4200 2400 3900 5400 3900 -2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2 - 4800 5700 5400 5700 -2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2 - 1800 3600 5400 3600 -2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 0 1 3 - 0 0 1.00 60.00 120.00 - 2700 4800 2700 4425 5400 4425 -2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 1 1 2 - 0 0 1.00 60.00 120.00 - 0 0 1.00 60.00 120.00 - 1950 7800 3600 7800 -4 1 0 50 0 0 12 0.0000 4 135 810 2775 7725 Dead band\001 -4 0 0 50 0 0 12 0.0000 4 180 1155 5400 5700 right saturation\001 -4 0 0 50 0 0 12 0.0000 4 135 1065 5400 3600 left saturation\001 -4 0 0 50 0 0 12 0.0000 4 180 2505 5400 3900 left coeff ( positive in that case )\001 -4 0 0 50 0 0 12 0.0000 4 180 2640 5475 5100 right coeff ( negative in that case )\001 -4 0 0 50 0 0 12 0.0000 4 105 480 5400 4425 center\001 diff --git a/Documentation/input/interactive.svg b/Documentation/input/interactive.svg new file mode 100644 index 000000000000..a3513709a09b --- /dev/null +++ b/Documentation/input/interactive.svg @@ -0,0 +1,24 @@ +<svg width="5.75in" height="3.90in" version="1.1" viewBox="1178 3138 6779.9424 4671.3427" xmlns="http://www.w3.org/2000/svg"> + <polyline transform="translate(-18.5,-16.294)" points="1200 3600 1800 3600 2400 4800 3e3 4800 4200 5700 4800 5700" fill="none" stroke="#000" stroke-width="15"/> + <rect x="1181.5" y="3133.7" width="3600" height="3150" rx="0" fill="none" stroke="#000" stroke-width="7"/> + <polyline transform="translate(-18.5,-16.294)" points="1200 4800 4800 4800" fill="none" stroke="#000" stroke-width="7"/> + <polyline transform="translate(-18.5,-16.294)" points="2400 4800 2400 6525 1950 7125 1950 7800" fill="none" stroke="#000" stroke-dasharray="40, 40" stroke-width="7"/> + <polyline transform="translate(-18.5,-16.294)" points="3e3 4800 3e3 6525 3600 7125 3600 7800" fill="none" stroke="#000" stroke-dasharray="40, 40" stroke-width="7"/> + <polyline transform="translate(-18.5,-16.294)" points="3837 5389 4125 5100 5400 5100" fill="none" stroke="#000" stroke-width="7"/> + <polyline transform="translate(-18.5,-16.294)" points="3889 5292 3826 5398 3932 5334" fill="none" stroke="#000" stroke-miterlimit="8" stroke-width="7"/> + <polyline transform="translate(-18.5,-16.294)" points="2112 4189 2400 3900 5400 3900" fill="none" stroke="#000" stroke-width="7"/> + <polyline transform="translate(-18.5,-16.294)" points="2164 4092 2101 4198 2207 4134" fill="none" stroke="#000" stroke-miterlimit="8" stroke-width="7"/> + <polyline transform="translate(-18.5,-16.294)" points="4800 5700 5400 5700" fill="none" stroke="#000" stroke-dasharray="40, 40" stroke-width="7"/> + <polyline transform="translate(-18.5,-16.294)" points="1800 3600 5400 3600" fill="none" stroke="#000" stroke-dasharray="40, 40" stroke-width="7"/> + <polyline transform="translate(-18.5,-16.294)" points="2700 4784 2700 4425 5400 4425" fill="none" stroke="#000" stroke-width="7"/> + <polyline transform="translate(-18.5,-16.294)" points="2670 4678 2700 4798 2730 4678" fill="none" stroke="#000" stroke-miterlimit="8" stroke-width="7"/> + <polyline transform="translate(-18.5,-16.294)" points="1967 7800 3583 7800" fill="none" stroke="#000" stroke-width="7"/> + <polyline transform="translate(-18.5,-16.294)" points="3478 7830 3598 7800 3478 7770" fill="none" stroke="#000" stroke-miterlimit="8" stroke-width="7"/> + <polyline transform="translate(-18.5,-16.294)" points="2072 7770 1952 7800 2072 7830" fill="none" stroke="#000" stroke-miterlimit="8" stroke-width="7"/> + <text x="2775" y="7725" font-family="sans-serif" font-size="144px" stroke="#000000" stroke-width=".025in" text-anchor="middle" xml:space="preserve">Dead band</text> + <text x="5400" y="5700" font-family="sans-serif" font-size="144px" stroke="#000000" stroke-width=".025in" xml:space="preserve">right saturation</text> + <text x="5400" y="3600" font-family="sans-serif" font-size="144px" stroke="#000000" stroke-width=".025in" xml:space="preserve">left saturation</text> + <text x="5400" y="3900" font-family="sans-serif" font-size="144px" stroke="#000000" stroke-width=".025in" xml:space="preserve">left coeff ( positive in that case )</text> + <text x="5475" y="5100" font-family="sans-serif" font-size="144px" stroke="#000000" stroke-width=".025in" xml:space="preserve">right coeff ( negative in that case )</text> + <text x="5400" y="4425" font-family="sans-serif" font-size="144px" stroke="#000000" stroke-width=".025in" xml:space="preserve">center</text> +</svg> diff --git a/Documentation/input/joydev/index.rst b/Documentation/input/joydev/index.rst new file mode 100644 index 000000000000..8d9666c7561c --- /dev/null +++ b/Documentation/input/joydev/index.rst @@ -0,0 +1,18 @@ +.. include:: <isonum.txt> + +====================== +Linux Joystick support +====================== + +:Copyright: |copy| 1996-2000 Vojtech Pavlik <vojtech@ucw.cz> - Sponsored by SuSE + +.. class:: toc-title + + Table of Contents + +.. toctree:: + :maxdepth: 3 + :numbered: + + joystick + joystick-api diff --git a/Documentation/input/joystick-api.txt b/Documentation/input/joydev/joystick-api.rst index 943b18eac918..95803e2e8cd0 100644 --- a/Documentation/input/joystick-api.txt +++ b/Documentation/input/joydev/joystick-api.rst @@ -1,31 +1,54 @@ - Joystick API Documentation -*-Text-*- +.. _joystick-api: - Ragnar Hojland Espinosa - <ragnar@macula.net> +===================== +Programming Interface +===================== - 7 Aug 1998 +:Author: Ragnar Hojland Espinosa <ragnar@macula.net> - 7 Aug 1998 -1. Initialization -~~~~~~~~~~~~~~~~~ +Introduction +============ + +.. important:: + This document describes legacy ``js`` interface. Newer clients are + encouraged to switch to the generic event (``evdev``) interface. + +The 1.0 driver uses a new, event based approach to the joystick driver. +Instead of the user program polling for the joystick values, the joystick +driver now reports only any changes of its state. See joystick-api.txt, +joystick.h and jstest.c included in the joystick package for more +information. The joystick device can be used in either blocking or +nonblocking mode, and supports select() calls. + +For backward compatibility the old (v0.x) interface is still included. +Any call to the joystick driver using the old interface will return values +that are compatible to the old interface. This interface is still limited +to 2 axes, and applications using it usually decode only 2 buttons, although +the driver provides up to 32. + +Initialization +============== Open the joystick device following the usual semantics (that is, with open). Since the driver now reports events instead of polling for changes, immediately after the open it will issue a series of synthetic events -(JS_EVENT_INIT) that you can read to check the initial state of the +(JS_EVENT_INIT) that you can read to obtain the initial state of the joystick. -By default, the device is opened in blocking mode. +By default, the device is opened in blocking mode:: int fd = open ("/dev/input/js0", O_RDONLY); -2. Event Reading -~~~~~~~~~~~~~~~~ +Event Reading +============= + +:: struct js_event e; read (fd, &e, sizeof(e)); -where js_event is defined as +where js_event is defined as:: struct js_event { __u32 time; /* event timestamp in milliseconds */ @@ -38,10 +61,10 @@ If the read is successful, it will return sizeof(e), unless you wanted to read more than one event per read as described in section 3.1. -2.1 js_event.type -~~~~~~~~~~~~~~~~~ +js_event.type +------------- -The possible values of ``type'' are +The possible values of ``type`` are:: #define JS_EVENT_BUTTON 0x01 /* button pressed/released */ #define JS_EVENT_AXIS 0x02 /* joystick moved */ @@ -49,47 +72,50 @@ The possible values of ``type'' are As mentioned above, the driver will issue synthetic JS_EVENT_INIT ORed events on open. That is, if it's issuing a INIT BUTTON event, the -current type value will be +current type value will be:: int type = JS_EVENT_BUTTON | JS_EVENT_INIT; /* 0x81 */ If you choose not to differentiate between synthetic or real events -you can turn off the JS_EVENT_INIT bits +you can turn off the JS_EVENT_INIT bits:: type &= ~JS_EVENT_INIT; /* 0x01 */ -2.2 js_event.number -~~~~~~~~~~~~~~~~~~~ +js_event.number +--------------- -The values of ``number'' correspond to the axis or button that +The values of ``number`` correspond to the axis or button that generated the event. Note that they carry separate numeration (that is, you have both an axis 0 and a button 0). Generally, - number + =============== ======= + Axis number + =============== ======= 1st Axis X 0 1st Axis Y 1 2nd Axis X 2 2nd Axis Y 3 ...and so on + =============== ======= Hats vary from one joystick type to another. Some can be moved in 8 directions, some only in 4, The driver, however, always reports a hat as two independent axis, even if the hardware doesn't allow independent movement. -2.3 js_event.value -~~~~~~~~~~~~~~~~~~ +js_event.value +-------------- -For an axis, ``value'' is a signed integer between -32767 and +32767 +For an axis, ``value`` is a signed integer between -32767 and +32767 representing the position of the joystick along that axis. If you -don't read a 0 when the joystick is `dead', or if it doesn't span the +don't read a 0 when the joystick is ``dead``, or if it doesn't span the full range, you should recalibrate it (with, for example, jscal). -For a button, ``value'' for a press button event is 1 and for a release +For a button, ``value`` for a press button event is 1 and for a release button event is 0. -Though this +Though this:: if (js_event.type == JS_EVENT_BUTTON) { buttons_state ^= (1 << js_event.number); @@ -97,6 +123,8 @@ Though this may work well if you handle JS_EVENT_INIT events separately, +:: + if ((js_event.type & ~JS_EVENT_INIT) == JS_EVENT_BUTTON) { if (js_event.value) buttons_state |= (1 << js_event.number); @@ -109,17 +137,17 @@ have to write a separate handler for JS_EVENT_INIT events in the first snippet, this ends up being shorter. -2.4 js_event.time -~~~~~~~~~~~~~~~~~ +js_event.time +------------- -The time an event was generated is stored in ``js_event.time''. It's a time +The time an event was generated is stored in ``js_event.time``. It's a time in milliseconds since ... well, since sometime in the past. This eases the task of detecting double clicks, figuring out if movement of axis and button presses happened at the same time, and similar. -3. Reading -~~~~~~~~~~ +Reading +======= If you open the device in blocking mode, a read will block (that is, wait) forever until an event is generated and effectively read. There @@ -133,8 +161,8 @@ admittedly, a long time;) b) open the device in non-blocking mode (O_NONBLOCK) -3.1 O_NONBLOCK -~~~~~~~~~~~~~~ +O_NONBLOCK +---------- If read returns -1 when reading in O_NONBLOCK mode, this isn't necessarily a "real" error (check errno(3)); it can just mean there @@ -143,6 +171,8 @@ all events on the queue (that is, until you get a -1). For example, +:: + while (1) { while (read (fd, &e, sizeof(e)) > 0) { process_event (e); @@ -171,14 +201,17 @@ the driver will switch to startup mode and next time you read it, synthetic events (JS_EVENT_INIT) will be generated to inform you of the actual state of the joystick. -[As for version 1.2.8, the queue is circular and able to hold 64 + +.. note:: + + As of version 1.2.8, the queue is circular and able to hold 64 events. You can increment this size bumping up JS_BUFF_SIZE in - joystick.h and recompiling the driver.] + joystick.h and recompiling the driver. In the above code, you might as well want to read more than one event at a time using the typical read(2) functionality. For that, you would -replace the read above with something like +replace the read above with something like:: struct js_event mybuffer[0xff]; int i = read (fd, mybuffer, sizeof(mybuffer)); @@ -189,10 +222,10 @@ sizeof(js_event) Again, if the buffer was full, it's a good idea to process the events and keep reading it until you empty the driver queue. -4. IOCTLs -~~~~~~~~~ +IOCTLs +====== -The joystick driver defines the following ioctl(2) operations. +The joystick driver defines the following ioctl(2) operations:: /* function 3rd arg */ #define JSIOCGAXES /* get number of axes char */ @@ -202,31 +235,31 @@ The joystick driver defines the following ioctl(2) operations. #define JSIOCSCORR /* set correction values &js_corr */ #define JSIOCGCORR /* get correction values &js_corr */ -For example, to read the number of axes +For example, to read the number of axes:: char number_of_axes; ioctl (fd, JSIOCGAXES, &number_of_axes); -4.1 JSIOGCVERSION -~~~~~~~~~~~~~~~~~ +JSIOGCVERSION +------------- JSIOGCVERSION is a good way to check in run-time whether the running driver is 1.0+ and supports the event interface. If it is not, the IOCTL will fail. For a compile-time decision, you can test the -JS_VERSION symbol +JS_VERSION symbol:: #ifdef JS_VERSION #if JS_VERSION > 0xsomething -4.2 JSIOCGNAME -~~~~~~~~~~~~~~ +JSIOCGNAME +---------- JSIOCGNAME(len) allows you to get the name string of the joystick - the same as is being printed at boot time. The 'len' argument is the length of the buffer provided by the application asking for the name. It is used to avoid -possible overrun should the name be too long. +possible overrun should the name be too long:: char name[128]; if (ioctl(fd, JSIOCGNAME(sizeof(name)), name) < 0) @@ -234,8 +267,8 @@ possible overrun should the name be too long. printf("Name: %s\n", name); -4.3 JSIOC[SG]CORR -~~~~~~~~~~~~~~~~~ +JSIOC[SG]CORR +------------- For usage on JSIOC[SG]CORR I suggest you to look into jscal.c They are not needed in a normal program, only in joystick calibration software @@ -246,7 +279,7 @@ warning in following releases of the driver. Both JSIOCSCORR and JSIOCGCORR expect &js_corr to be able to hold information for all axis. That is, struct js_corr corr[MAX_AXIS]; -struct js_corr is defined as +struct js_corr is defined as:: struct js_corr { __s32 coef[8]; @@ -254,17 +287,17 @@ struct js_corr is defined as __u16 type; }; -and ``type'' +and ``type``:: #define JS_CORR_NONE 0x00 /* returns raw values */ #define JS_CORR_BROKEN 0x01 /* broken line */ -5. Backward compatibility -~~~~~~~~~~~~~~~~~~~~~~~~~ +Backward compatibility +====================== The 0.x joystick driver API is quite limited and its usage is deprecated. -The driver offers backward compatibility, though. Here's a quick summary: +The driver offers backward compatibility, though. Here's a quick summary:: struct JS_DATA_TYPE js; while (1) { @@ -275,7 +308,7 @@ The driver offers backward compatibility, though. Here's a quick summary: } As you can figure out from the example, the read returns immediately, -with the actual state of the joystick. +with the actual state of the joystick:: struct JS_DATA_TYPE { int buttons; /* immediate button state */ @@ -283,12 +316,14 @@ with the actual state of the joystick. int y; /* immediate y axis value */ }; -and JS_RETURN is defined as +and JS_RETURN is defined as:: #define JS_RETURN sizeof(struct JS_DATA_TYPE) To test the state of the buttons, +:: + first_button_state = js.buttons & 1; second_button_state = js.buttons & 2; @@ -302,13 +337,12 @@ called Multisystem joysticks in this driver), under /dev/djsX. This driver doesn't try to be compatible with that interface. -6. Final Notes -~~~~~~~~~~~~~~ +Final Notes +=========== -____/| Comments, additions, and specially corrections are welcome. -\ o.O| Documentation valid for at least version 1.2.8 of the joystick - =(_)= driver and as usual, the ultimate source for documentation is - U to "Use The Source Luke" or, at your convenience, Vojtech ;) +:: - - Ragnar -EOF + ____/| Comments, additions, and specially corrections are welcome. + \ o.O| Documentation valid for at least version 1.2.8 of the joystick + =(_)= driver and as usual, the ultimate source for documentation is + U to "Use The Source Luke" or, at your convenience, Vojtech ;) diff --git a/Documentation/input/joydev/joystick.rst b/Documentation/input/joydev/joystick.rst new file mode 100644 index 000000000000..9746fd76cc58 --- /dev/null +++ b/Documentation/input/joydev/joystick.rst @@ -0,0 +1,585 @@ +.. include:: <isonum.txt> + +.. _joystick-doc: + +Introduction +============ + +The joystick driver for Linux provides support for a variety of joysticks +and similar devices. It is based on a larger project aiming to support all +input devices in Linux. + +The mailing list for the project is: + + linux-input@vger.kernel.org + +send "subscribe linux-input" to majordomo@vger.kernel.org to subscribe to it. + +Usage +===== + +For basic usage you just choose the right options in kernel config and +you should be set. + +Utilities +--------- + +For testing and other purposes (for example serial devices), there is a set +of utilities, such as ``jstest``, ``jscal``, and ``evtest``, +usually packaged as ``joystick``, ``input-utils``, ``evtest``, and so on. + +``inputattach`` utility is required if your joystick is connected to a +serial port. + +Device nodes +------------ + +For applications to be able to use the joysticks, device nodes should be +created in /dev. Normally it is done automatically by the system, but +it can also be done by hand:: + + cd /dev + rm js* + mkdir input + mknod input/js0 c 13 0 + mknod input/js1 c 13 1 + mknod input/js2 c 13 2 + mknod input/js3 c 13 3 + ln -s input/js0 js0 + ln -s input/js1 js1 + ln -s input/js2 js2 + ln -s input/js3 js3 + +For testing with inpututils it's also convenient to create these:: + + mknod input/event0 c 13 64 + mknod input/event1 c 13 65 + mknod input/event2 c 13 66 + mknod input/event3 c 13 67 + +Modules needed +-------------- + +For all joystick drivers to function, you'll need the userland interface +module in kernel, either loaded or compiled in:: + + modprobe joydev + +For gameport joysticks, you'll have to load the gameport driver as well:: + + modprobe ns558 + +And for serial port joysticks, you'll need the serial input line +discipline module loaded and the inputattach utility started:: + + modprobe serport + inputattach -xxx /dev/tts/X & + +In addition to that, you'll need the joystick driver module itself, most +usually you'll have an analog joystick:: + + modprobe analog + +For automatic module loading, something like this might work - tailor to +your needs:: + + alias tty-ldisc-2 serport + alias char-major-13 input + above input joydev ns558 analog + options analog map=gamepad,none,2btn + +Verifying that it works +----------------------- + +For testing the joystick driver functionality, there is the jstest +program in the utilities package. You run it by typing:: + + jstest /dev/input/js0 + +And it should show a line with the joystick values, which update as you +move the stick, and press its buttons. The axes should all be zero when the +joystick is in the center position. They should not jitter by themselves to +other close values, and they also should be steady in any other position of +the stick. They should have the full range from -32767 to 32767. If all this +is met, then it's all fine, and you can play the games. :) + +If it's not, then there might be a problem. Try to calibrate the joystick, +and if it still doesn't work, read the drivers section of this file, the +troubleshooting section, and the FAQ. + +Calibration +----------- + +For most joysticks you won't need any manual calibration, since the +joystick should be autocalibrated by the driver automagically. However, with +some analog joysticks, that either do not use linear resistors, or if you +want better precision, you can use the jscal program:: + + jscal -c /dev/input/js0 + +included in the joystick package to set better correction coefficients than +what the driver would choose itself. + +After calibrating the joystick you can verify if you like the new +calibration using the jstest command, and if you do, you then can save the +correction coefficients into a file:: + + jscal -p /dev/input/js0 > /etc/joystick.cal + +And add a line to your rc script executing that file:: + + source /etc/joystick.cal + +This way, after the next reboot your joystick will remain calibrated. You +can also add the ``jscal -p`` line to your shutdown script. + +HW specific driver information +============================== + +In this section each of the separate hardware specific drivers is described. + +Analog joysticks +---------------- + +The analog.c uses the standard analog inputs of the gameport, and thus +supports all standard joysticks and gamepads. It uses a very advanced +routine for this, allowing for data precision that can't be found on any +other system. + +It also supports extensions like additional hats and buttons compatible +with CH Flightstick Pro, ThrustMaster FCS or 6 and 8 button gamepads. Saitek +Cyborg 'digital' joysticks are also supported by this driver, because +they're basically souped up CHF sticks. + +However the only types that can be autodetected are: + +* 2-axis, 4-button joystick +* 3-axis, 4-button joystick +* 4-axis, 4-button joystick +* Saitek Cyborg 'digital' joysticks + +For other joystick types (more/less axes, hats, and buttons) support +you'll need to specify the types either on the kernel command line or on the +module command line, when inserting analog into the kernel. The +parameters are:: + + analog.map=<type1>,<type2>,<type3>,.... + +'type' is type of the joystick from the table below, defining joysticks +present on gameports in the system, starting with gameport0, second 'type' +entry defining joystick on gameport1 and so on. + + ========= ===================================================== + Type Meaning + ========= ===================================================== + none No analog joystick on that port + auto Autodetect joystick + 2btn 2-button n-axis joystick + y-joy Two 2-button 2-axis joysticks on an Y-cable + y-pad Two 2-button 2-axis gamepads on an Y-cable + fcs Thrustmaster FCS compatible joystick + chf Joystick with a CH Flightstick compatible hat + fullchf CH Flightstick compatible with two hats and 6 buttons + gamepad 4/6-button n-axis gamepad + gamepad8 8-button 2-axis gamepad + ========= ===================================================== + +In case your joystick doesn't fit in any of the above categories, you can +specify the type as a number by combining the bits in the table below. This +is not recommended unless you really know what are you doing. It's not +dangerous, but not simple either. + + ==== ========================= + Bit Meaning + ==== ========================= + 0 Axis X1 + 1 Axis Y1 + 2 Axis X2 + 3 Axis Y2 + 4 Button A + 5 Button B + 6 Button C + 7 Button D + 8 CHF Buttons X and Y + 9 CHF Hat 1 + 10 CHF Hat 2 + 11 FCS Hat + 12 Pad Button X + 13 Pad Button Y + 14 Pad Button U + 15 Pad Button V + 16 Saitek F1-F4 Buttons + 17 Saitek Digital Mode + 19 GamePad + 20 Joy2 Axis X1 + 21 Joy2 Axis Y1 + 22 Joy2 Axis X2 + 23 Joy2 Axis Y2 + 24 Joy2 Button A + 25 Joy2 Button B + 26 Joy2 Button C + 27 Joy2 Button D + 31 Joy2 GamePad + ==== ========================= + +Microsoft SideWinder joysticks +------------------------------ + +Microsoft 'Digital Overdrive' protocol is supported by the sidewinder.c +module. All currently supported joysticks: + +* Microsoft SideWinder 3D Pro +* Microsoft SideWinder Force Feedback Pro +* Microsoft SideWinder Force Feedback Wheel +* Microsoft SideWinder FreeStyle Pro +* Microsoft SideWinder GamePad (up to four, chained) +* Microsoft SideWinder Precision Pro +* Microsoft SideWinder Precision Pro USB + +are autodetected, and thus no module parameters are needed. + +There is one caveat with the 3D Pro. There are 9 buttons reported, +although the joystick has only 8. The 9th button is the mode switch on the +rear side of the joystick. However, moving it, you'll reset the joystick, +and make it unresponsive for about a one third of a second. Furthermore, the +joystick will also re-center itself, taking the position it was in during +this time as a new center position. Use it if you want, but think first. + +The SideWinder Standard is not a digital joystick, and thus is supported +by the analog driver described above. + +Logitech ADI devices +-------------------- + +Logitech ADI protocol is supported by the adi.c module. It should support +any Logitech device using this protocol. This includes, but is not limited +to: + +* Logitech CyberMan 2 +* Logitech ThunderPad Digital +* Logitech WingMan Extreme Digital +* Logitech WingMan Formula +* Logitech WingMan Interceptor +* Logitech WingMan GamePad +* Logitech WingMan GamePad USB +* Logitech WingMan GamePad Extreme +* Logitech WingMan Extreme Digital 3D + +ADI devices are autodetected, and the driver supports up to two (any +combination of) devices on a single gameport, using an Y-cable or chained +together. + +Logitech WingMan Joystick, Logitech WingMan Attack, Logitech WingMan +Extreme and Logitech WingMan ThunderPad are not digital joysticks and are +handled by the analog driver described above. Logitech WingMan Warrior and +Logitech Magellan are supported by serial drivers described below. Logitech +WingMan Force and Logitech WingMan Formula Force are supported by the +I-Force driver described below. Logitech CyberMan is not supported yet. + +Gravis GrIP +----------- + +Gravis GrIP protocol is supported by the grip.c module. It currently +supports: + +* Gravis GamePad Pro +* Gravis BlackHawk Digital +* Gravis Xterminator +* Gravis Xterminator DualControl + +All these devices are autodetected, and you can even use any combination +of up to two of these pads either chained together or using an Y-cable on a +single gameport. + +GrIP MultiPort isn't supported yet. Gravis Stinger is a serial device and is +supported by the stinger driver. Other Gravis joysticks are supported by the +analog driver. + +FPGaming A3D and MadCatz A3D +---------------------------- + +The Assassin 3D protocol created by FPGaming, is used both by FPGaming +themselves and is licensed to MadCatz. A3D devices are supported by the +a3d.c module. It currently supports: + +* FPGaming Assassin 3D +* MadCatz Panther +* MadCatz Panther XL + +All these devices are autodetected. Because the Assassin 3D and the Panther +allow connecting analog joysticks to them, you'll need to load the analog +driver as well to handle the attached joysticks. + +The trackball should work with USB mousedev module as a normal mouse. See +the USB documentation for how to setup an USB mouse. + +ThrustMaster DirectConnect (BSP) +-------------------------------- + +The TM DirectConnect (BSP) protocol is supported by the tmdc.c +module. This includes, but is not limited to: + +* ThrustMaster Millennium 3D Interceptor +* ThrustMaster 3D Rage Pad +* ThrustMaster Fusion Digital Game Pad + +Devices not directly supported, but hopefully working are: + +* ThrustMaster FragMaster +* ThrustMaster Attack Throttle + +If you have one of these, contact me. + +TMDC devices are autodetected, and thus no parameters to the module +are needed. Up to two TMDC devices can be connected to one gameport, using +an Y-cable. + +Creative Labs Blaster +--------------------- + +The Blaster protocol is supported by the cobra.c module. It supports only +the: + +* Creative Blaster GamePad Cobra + +Up to two of these can be used on a single gameport, using an Y-cable. + +Genius Digital joysticks +------------------------ + +The Genius digitally communicating joysticks are supported by the gf2k.c +module. This includes: + +* Genius Flight2000 F-23 joystick +* Genius Flight2000 F-31 joystick +* Genius G-09D gamepad + +Other Genius digital joysticks are not supported yet, but support can be +added fairly easily. + +InterAct Digital joysticks +-------------------------- + +The InterAct digitally communicating joysticks are supported by the +interact.c module. This includes: + +* InterAct HammerHead/FX gamepad +* InterAct ProPad8 gamepad + +Other InterAct digital joysticks are not supported yet, but support can be +added fairly easily. + +PDPI Lightning 4 gamecards +-------------------------- + +PDPI Lightning 4 gamecards are supported by the lightning.c module. +Once the module is loaded, the analog driver can be used to handle the +joysticks. Digitally communicating joystick will work only on port 0, while +using Y-cables, you can connect up to 8 analog joysticks to a single L4 +card, 16 in case you have two in your system. + +Trident 4DWave / Aureal Vortex +------------------------------ + +Soundcards with a Trident 4DWave DX/NX or Aureal Vortex/Vortex2 chipsets +provide an "Enhanced Game Port" mode where the soundcard handles polling the +joystick. This mode is supported by the pcigame.c module. Once loaded the +analog driver can use the enhanced features of these gameports.. + +Crystal SoundFusion +------------------- + +Soundcards with Crystal SoundFusion chipsets provide an "Enhanced Game +Port", much like the 4DWave or Vortex above. This, and also the normal mode +for the port of the SoundFusion is supported by the cs461x.c module. + +SoundBlaster Live! +------------------ + +The Live! has a special PCI gameport, which, although it doesn't provide +any "Enhanced" stuff like 4DWave and friends, is quite a bit faster than +its ISA counterparts. It also requires special support, hence the +emu10k1-gp.c module for it instead of the normal ns558.c one. + +SoundBlaster 64 and 128 - ES1370 and ES1371, ESS Solo1 and S3 SonicVibes +------------------------------------------------------------------------ + +These PCI soundcards have specific gameports. They are handled by the +sound drivers themselves. Make sure you select gameport support in the +joystick menu and sound card support in the sound menu for your appropriate +card. + +Amiga +----- + +Amiga joysticks, connected to an Amiga, are supported by the amijoy.c +driver. Since they can't be autodetected, the driver has a command line: + + amijoy.map=<a>,<b> + +a and b define the joysticks connected to the JOY0DAT and JOY1DAT ports of +the Amiga. + + ====== =========================== + Value Joystick type + ====== =========================== + 0 None + 1 1-button digital joystick + ====== =========================== + +No more joystick types are supported now, but that should change in the +future if I get an Amiga in the reach of my fingers. + +Game console and 8-bit pads and joysticks +----------------------------------------- + +These pads and joysticks are not designed for PCs and other computers +Linux runs on, and usually require a special connector for attaching +them through a parallel port. + +See :ref:`joystick-parport` for more info. + +SpaceTec/LabTec devices +----------------------- + +SpaceTec serial devices communicate using the SpaceWare protocol. It is +supported by the spaceorb.c and spaceball.c drivers. The devices currently +supported by spaceorb.c are: + +* SpaceTec SpaceBall Avenger +* SpaceTec SpaceOrb 360 + +Devices currently supported by spaceball.c are: + +* SpaceTec SpaceBall 4000 FLX + +In addition to having the spaceorb/spaceball and serport modules in the +kernel, you also need to attach a serial port to it. to do that, run the +inputattach program:: + + inputattach --spaceorb /dev/tts/x & + +or:: + + inputattach --spaceball /dev/tts/x & + +where /dev/tts/x is the serial port which the device is connected to. After +doing this, the device will be reported and will start working. + +There is one caveat with the SpaceOrb. The button #6, the on the bottom +side of the orb, although reported as an ordinary button, causes internal +recentering of the spaceorb, moving the zero point to the position in which +the ball is at the moment of pressing the button. So, think first before +you bind it to some other function. + +SpaceTec SpaceBall 2003 FLX and 3003 FLX are not supported yet. + +Logitech SWIFT devices +---------------------- + +The SWIFT serial protocol is supported by the warrior.c module. It +currently supports only the: + +* Logitech WingMan Warrior + +but in the future, Logitech CyberMan (the original one, not CM2) could be +supported as well. To use the module, you need to run inputattach after you +insert/compile the module into your kernel:: + + inputattach --warrior /dev/tts/x & + +/dev/tts/x is the serial port your Warrior is attached to. + +Magellan / Space Mouse +---------------------- + +The Magellan (or Space Mouse), manufactured by LogiCad3d (formerly Space +Systems), for many other companies (Logitech, HP, ...) is supported by the +joy-magellan module. It currently supports only the: + +* Magellan 3D +* Space Mouse + +models, the additional buttons on the 'Plus' versions are not supported yet. + +To use it, you need to attach the serial port to the driver using the:: + + inputattach --magellan /dev/tts/x & + +command. After that the Magellan will be detected, initialized, will beep, +and the /dev/input/jsX device should become usable. + +I-Force devices +--------------- + +All I-Force devices are supported by the iforce module. This includes: + +* AVB Mag Turbo Force +* AVB Top Shot Pegasus +* AVB Top Shot Force Feedback Racing Wheel +* Logitech WingMan Force +* Logitech WingMan Force Wheel +* Guillemot Race Leader Force Feedback +* Guillemot Force Feedback Racing Wheel +* Thrustmaster Motor Sport GT + +To use it, you need to attach the serial port to the driver using the:: + + inputattach --iforce /dev/tts/x & + +command. After that the I-Force device will be detected, and the +/dev/input/jsX device should become usable. + +In case you're using the device via the USB port, the inputattach command +isn't needed. + +The I-Force driver now supports force feedback via the event interface. + +Please note that Logitech WingMan 3D devices are _not_ supported by this +module, rather by hid. Force feedback is not supported for those devices. +Logitech gamepads are also hid devices. + +Gravis Stinger gamepad +---------------------- + +The Gravis Stinger serial port gamepad, designed for use with laptop +computers, is supported by the stinger.c module. To use it, attach the +serial port to the driver using:: + + inputattach --stinger /dev/tty/x & + +where x is the number of the serial port. + +Troubleshooting +=============== + +There is quite a high probability that you run into some problems. For +testing whether the driver works, if in doubt, use the jstest utility in +some of its modes. The most useful modes are "normal" - for the 1.x +interface, and "old" for the "0.x" interface. You run it by typing:: + + jstest --normal /dev/input/js0 + jstest --old /dev/input/js0 + +Additionally you can do a test with the evtest utility:: + + evtest /dev/input/event0 + +Oh, and read the FAQ! :) + +FAQ +=== + +:Q: Running 'jstest /dev/input/js0' results in "File not found" error. What's the + cause? +:A: The device files don't exist. Create them (see section 2.2). + +:Q: Is it possible to connect my old Atari/Commodore/Amiga/console joystick + or pad that uses a 9-pin D-type cannon connector to the serial port of my + PC? +:A: Yes, it is possible, but it'll burn your serial port or the pad. It + won't work, of course. + +:Q: My joystick doesn't work with Quake / Quake 2. What's the cause? +:A: Quake / Quake 2 don't support joystick. Use joy2key to simulate keypresses + for them. diff --git a/Documentation/input/joystick-parport.txt b/Documentation/input/joystick-parport.txt deleted file mode 100644 index 56870c70a796..000000000000 --- a/Documentation/input/joystick-parport.txt +++ /dev/null @@ -1,542 +0,0 @@ - Linux Joystick parport drivers v2.0 - (c) 1998-2000 Vojtech Pavlik <vojtech@ucw.cz> - (c) 1998 Andree Borrmann <a.borrmann@tu-bs.de> - Sponsored by SuSE ----------------------------------------------------------------------------- - -0. Disclaimer -~~~~~~~~~~~~~ - Any information in this file is provided as-is, without any guarantee that -it will be true. So, use it at your own risk. The possible damages that can -happen include burning your parallel port, and/or the sticks and joystick -and maybe even more. Like when a lightning kills you it is not our problem. - -1. Intro -~~~~~~~~ - The joystick parport drivers are used for joysticks and gamepads not -originally designed for PCs and other computers Linux runs on. Because of -that, PCs usually lack the right ports to connect these devices to. Parallel -port, because of its ability to change single bits at will, and providing -both output and input bits is the most suitable port on the PC for -connecting such devices. - -2. Devices supported -~~~~~~~~~~~~~~~~~~~~ - Many console and 8-bit computer gamepads and joysticks are supported. The -following subsections discuss usage of each. - -2.1 NES and SNES -~~~~~~~~~~~~~~~~ - The Nintendo Entertainment System and Super Nintendo Entertainment System -gamepads are widely available, and easy to get. Also, they are quite easy to -connect to a PC, and don't need much processing speed (108 us for NES and -165 us for SNES, compared to about 1000 us for PC gamepads) to communicate -with them. - - All NES and SNES use the same synchronous serial protocol, clocked from -the computer's side (and thus timing insensitive). To allow up to 5 NES -and/or SNES gamepads and/or SNES mice connected to the parallel port at once, -the output lines of the parallel port are shared, while one of 5 available -input lines is assigned to each gamepad. - - This protocol is handled by the gamecon.c driver, so that's the one -you'll use for NES, SNES gamepads and SNES mice. - - The main problem with PC parallel ports is that they don't have +5V power -source on any of their pins. So, if you want a reliable source of power -for your pads, use either keyboard or joystick port, and make a pass-through -cable. You can also pull the power directly from the power supply (the red -wire is +5V). - - If you want to use the parallel port only, you can take the power is from -some data pin. For most gamepad and parport implementations only one pin is -needed, and I'd recommend pin 9 for that, the highest data bit. On the other -hand, if you are not planning to use anything else than NES / SNES on the -port, anything between and including pin 4 and pin 9 will work. - -(pin 9) -----> Power - - Unfortunately, there are pads that need a lot more of power, and parallel -ports that can't give much current through the data pins. If this is your -case, you'll need to use diodes (as a prevention of destroying your parallel -port), and combine the currents of two or more data bits together. - - Diodes -(pin 9) ----|>|-------+------> Power - | -(pin 8) ----|>|-------+ - | -(pin 7) ----|>|-------+ - | - <and so on> : - | -(pin 4) ----|>|-------+ - - Ground is quite easy. On PC's parallel port the ground is on any of the -pins from pin 18 to pin 25. So use any pin of these you like for the ground. - -(pin 18) -----> Ground - - NES and SNES pads have two input bits, Clock and Latch, which drive the -serial transfer. These are connected to pins 2 and 3 of the parallel port, -respectively. - -(pin 2) -----> Clock -(pin 3) -----> Latch - - And the last thing is the NES / SNES data wire. Only that isn't shared and -each pad needs its own data pin. The parallel port pins are: - -(pin 10) -----> Pad 1 data -(pin 11) -----> Pad 2 data -(pin 12) -----> Pad 3 data -(pin 13) -----> Pad 4 data -(pin 15) -----> Pad 5 data - - Note that pin 14 is not used, since it is not an input pin on the parallel -port. - - This is everything you need on the PC's side of the connection, now on to -the gamepads side. The NES and SNES have different connectors. Also, there -are quite a lot of NES clones, and because Nintendo used proprietary -connectors for their machines, the cloners couldn't and used standard D-Cannon -connectors. Anyway, if you've got a gamepad, and it has buttons A, B, Turbo -A, Turbo B, Select and Start, and is connected through 5 wires, then it is -either a NES or NES clone and will work with this connection. SNES gamepads -also use 5 wires, but have more buttons. They will work as well, of course. - -Pinout for NES gamepads Pinout for SNES gamepads and mice - - +----> Power +-----------------------\ - | 7 | o o o o | x x o | 1 - 5 +---------+ 7 +-----------------------/ - | x x o \ | | | | | - | o o o o | | | | | +-> Ground - 4 +------------+ 1 | | | +------------> Data - | | | | | | +---------------> Latch - | | | +-> Ground | +------------------> Clock - | | +----> Clock +---------------------> Power - | +-------> Latch - +----------> Data - -Pinout for NES clone (db9) gamepads Pinout for NES clone (db15) gamepads - - +---------> Clock +-----------------> Data - | +-------> Latch | +---> Ground - | | +-----> Data | | - | | | ___________________ - _____________ 8 \ o x x x x x x o / 1 - 5 \ x o o o x / 1 \ o x x o x x o / - \ x o x o / 15 `~~~~~~~~~~~~~' 9 - 9 `~~~~~~~' 6 | | | - | | | | +----> Clock - | +----> Power | +----------> Latch - +--------> Ground +----------------> Power - -2.2 Multisystem joysticks -~~~~~~~~~~~~~~~~~~~~~~~~~ - In the era of 8-bit machines, there was something like de-facto standard -for joystick ports. They were all digital, and all used D-Cannon 9 pin -connectors (db9). Because of that, a single joystick could be used without -hassle on Atari (130, 800XE, 800XL, 2600, 7200), Amiga, Commodore C64, -Amstrad CPC, Sinclair ZX Spectrum and many other machines. That's why these -joysticks are called "Multisystem". - - Now their pinout: - - +---------> Right - | +-------> Left - | | +-----> Down - | | | +---> Up - | | | | - _____________ -5 \ x o o o o / 1 - \ x o x o / - 9 `~~~~~~~' 6 - | | - | +----> Button - +--------> Ground - - However, as time passed, extensions to this standard developed, and these -were not compatible with each other: - - - Atari 130, 800/XL/XE MSX - - +-----------> Power - +---------> Right | +---------> Right - | +-------> Left | | +-------> Left - | | +-----> Down | | | +-----> Down - | | | +---> Up | | | | +---> Up - | | | | | | | | | - _____________ _____________ -5 \ x o o o o / 1 5 \ o o o o o / 1 - \ x o o o / \ o o o o / - 9 `~~~~~~~' 6 9 `~~~~~~~' 6 - | | | | | | | - | | +----> Button | | | +----> Button 1 - | +------> Power | | +------> Button 2 - +--------> Ground | +--------> Output 3 - +----------> Ground - - Amstrad CPC Commodore C64 - - +-----------> Analog Y - +---------> Right | +---------> Right - | +-------> Left | | +-------> Left - | | +-----> Down | | | +-----> Down - | | | +---> Up | | | | +---> Up - | | | | | | | | | - _____________ _____________ -5 \ x o o o o / 1 5 \ o o o o o / 1 - \ x o o o / \ o o o o / - 9 `~~~~~~~' 6 9 `~~~~~~~' 6 - | | | | | | | - | | +----> Button 1 | | | +----> Button - | +------> Button 2 | | +------> Power - +--------> Ground | +--------> Ground - +----------> Analog X - - Sinclair Spectrum +2A/+3 Amiga 1200 - - +-----------> Up +-----------> Button 3 - | +---------> Fire | +---------> Right - | | | | +-------> Left - | | +-----> Ground | | | +-----> Down - | | | | | | | +---> Up - | | | | | | | | - _____________ _____________ -5 \ o o x o x / 1 5 \ o o o o o / 1 - \ o o o o / \ o o o o / - 9 `~~~~~~~' 6 9 `~~~~~~~' 6 - | | | | | | | | - | | | +----> Right | | | +----> Button 1 - | | +------> Left | | +------> Power - | +--------> Ground | +--------> Ground - +----------> Down +----------> Button 2 - - And there were many others. - -2.2.1 Multisystem joysticks using db9.c -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - For the Multisystem joysticks, and their derivatives, the db9.c driver -was written. It allows only one joystick / gamepad per parallel port, but -the interface is easy to build and works with almost anything. - - For the basic 1-button Multisystem joystick you connect its wires to the -parallel port like this: - -(pin 1) -----> Power -(pin 18) -----> Ground - -(pin 2) -----> Up -(pin 3) -----> Down -(pin 4) -----> Left -(pin 5) -----> Right -(pin 6) -----> Button 1 - - However, if the joystick is switch based (eg. clicks when you move it), -you might or might not, depending on your parallel port, need 10 kOhm pullup -resistors on each of the direction and button signals, like this: - -(pin 2) ------------+------> Up - Resistor | -(pin 1) --[10kOhm]--+ - - Try without, and if it doesn't work, add them. For TTL based joysticks / -gamepads the pullups are not needed. - - For joysticks with two buttons you connect the second button to pin 7 on -the parallel port. - -(pin 7) -----> Button 2 - - And that's it. - - On a side note, if you have already built a different adapter for use with -the digital joystick driver 0.8.0.2, this is also supported by the db9.c -driver, as device type 8. (See section 3.2) - -2.2.2 Multisystem joysticks using gamecon.c -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - For some people just one joystick per parallel port is not enough, and/or -want to use them on one parallel port together with NES/SNES/PSX pads. This is -possible using the gamecon.c. It supports up to 5 devices of the above types, -including 1 and 2 buttons Multisystem joysticks. - - However, there is nothing for free. To allow more sticks to be used at -once, you need the sticks to be purely switch based (that is non-TTL), and -not to need power. Just a plain simple six switches inside. If your -joystick can do more (eg. turbofire) you'll need to disable it totally first -if you want to use gamecon.c. - - Also, the connection is a bit more complex. You'll need a bunch of diodes, -and one pullup resistor. First, you connect the Directions and the button -the same as for db9, however with the diodes between. - - Diodes -(pin 2) -----|<|----> Up -(pin 3) -----|<|----> Down -(pin 4) -----|<|----> Left -(pin 5) -----|<|----> Right -(pin 6) -----|<|----> Button 1 - - For two button sticks you also connect the other button. - -(pin 7) -----|<|----> Button 2 - - And finally, you connect the Ground wire of the joystick, like done in -this little schematic to Power and Data on the parallel port, as described -for the NES / SNES pads in section 2.1 of this file - that is, one data pin -for each joystick. The power source is shared. - -Data ------------+-----> Ground - Resistor | -Power --[10kOhm]--+ - - And that's all, here we go! - -2.2.3 Multisystem joysticks using turbografx.c -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - The TurboGraFX interface, designed by - - Steffen Schwenke <schwenke@burg-halle.de> - - allows up to 7 Multisystem joysticks connected to the parallel port. In -Steffen's version, there is support for up to 5 buttons per joystick. However, -since this doesn't work reliably on all parallel ports, the turbografx.c driver -supports only one button per joystick. For more information on how to build the -interface, see - - http://www2.burg-halle.de/~schwenke/parport.html - -2.3 Sony Playstation -~~~~~~~~~~~~~~~~~~~~ - - The PSX controller is supported by the gamecon.c. Pinout of the PSX -controller (compatible with DirectPadPro): - - +---------+---------+---------+ -9 | o o o | o o o | o o o | 1 parallel - \________|_________|________/ port pins - | | | | | | - | | | | | +--------> Clock --- (4) - | | | | +------------> Select --- (3) - | | | +---------------> Power --- (5-9) - | | +------------------> Ground --- (18-25) - | +-------------------------> Command --- (2) - +----------------------------> Data --- (one of 10,11,12,13,15) - - The driver supports these controllers: - - * Standard PSX Pad - * NegCon PSX Pad - * Analog PSX Pad (red mode) - * Analog PSX Pad (green mode) - * PSX Rumble Pad - * PSX DDR Pad - -2.4 Sega -~~~~~~~~ - All the Sega controllers are more or less based on the standard 2-button -Multisystem joystick. However, since they don't use switches and use TTL -logic, the only driver usable with them is the db9.c driver. - -2.4.1 Sega Master System -~~~~~~~~~~~~~~~~~~~~~~~~ - The SMS gamepads are almost exactly the same as normal 2-button -Multisystem joysticks. Set the driver to Multi2 mode, use the corresponding -parallel port pins, and the following schematic: - - +-----------> Power - | +---------> Right - | | +-------> Left - | | | +-----> Down - | | | | +---> Up - | | | | | - _____________ -5 \ o o o o o / 1 - \ o o x o / - 9 `~~~~~~~' 6 - | | | - | | +----> Button 1 - | +--------> Ground - +----------> Button 2 - -2.4.2 Sega Genesis aka MegaDrive -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - The Sega Genesis (in Europe sold as Sega MegaDrive) pads are an extension -to the Sega Master System pads. They use more buttons (3+1, 5+1, 6+1). Use -the following schematic: - - +-----------> Power - | +---------> Right - | | +-------> Left - | | | +-----> Down - | | | | +---> Up - | | | | | - _____________ -5 \ o o o o o / 1 - \ o o o o / - 9 `~~~~~~~' 6 - | | | | - | | | +----> Button 1 - | | +------> Select - | +--------> Ground - +----------> Button 2 - - The Select pin goes to pin 14 on the parallel port. - -(pin 14) -----> Select - - The rest is the same as for Multi2 joysticks using db9.c - -2.4.3 Sega Saturn -~~~~~~~~~~~~~~~~~ - Sega Saturn has eight buttons, and to transfer that, without hacks like -Genesis 6 pads use, it needs one more select pin. Anyway, it is still -handled by the db9.c driver. Its pinout is very different from anything -else. Use this schematic: - - +-----------> Select 1 - | +---------> Power - | | +-------> Up - | | | +-----> Down - | | | | +---> Ground - | | | | | - _____________ -5 \ o o o o o / 1 - \ o o o o / - 9 `~~~~~~~' 6 - | | | | - | | | +----> Select 2 - | | +------> Right - | +--------> Left - +----------> Power - - Select 1 is pin 14 on the parallel port, Select 2 is pin 16 on the -parallel port. - -(pin 14) -----> Select 1 -(pin 16) -----> Select 2 - - The other pins (Up, Down, Right, Left, Power, Ground) are the same as for -Multi joysticks using db9.c - -3. The drivers -~~~~~~~~~~~~~~ - There are three drivers for the parallel port interfaces. Each, as -described above, allows to connect a different group of joysticks and pads. -Here are described their command lines: - -3.1 gamecon.c -~~~~~~~~~~~~~ - Using gamecon.c you can connect up to five devices to one parallel port. It -uses the following kernel/module command line: - - gamecon.map=port,pad1,pad2,pad3,pad4,pad5 - - Where 'port' the number of the parport interface (eg. 0 for parport0). - - And 'pad1' to 'pad5' are pad types connected to different data input pins -(10,11,12,13,15), as described in section 2.1 of this file. - - The types are: - - Type | Joystick/Pad - -------------------- - 0 | None - 1 | SNES pad - 2 | NES pad - 4 | Multisystem 1-button joystick - 5 | Multisystem 2-button joystick - 6 | N64 pad - 7 | Sony PSX controller - 8 | Sony PSX DDR controller - 9 | SNES mouse - - The exact type of the PSX controller type is autoprobed when used, so -hot swapping should work (but is not recommended). - - Should you want to use more than one of parallel ports at once, you can use -gamecon.map2 and gamecon.map3 as additional command line parameters for two -more parallel ports. - - There are two options specific to PSX driver portion. gamecon.psx_delay sets -the command delay when talking to the controllers. The default of 25 should -work but you can try lowering it for better performance. If your pads don't -respond try raising it until they work. Setting the type to 8 allows the -driver to be used with Dance Dance Revolution or similar games. Arrow keys are -registered as key presses instead of X and Y axes. - -3.2 db9.c -~~~~~~~~~ - Apart from making an interface, there is nothing difficult on using the -db9.c driver. It uses the following kernel/module command line: - - db9.dev=port,type - - Where 'port' is the number of the parport interface (eg. 0 for parport0). - - Caveat here: This driver only works on bidirectional parallel ports. If -your parallel port is recent enough, you should have no trouble with this. -Old parallel ports may not have this feature. - - 'Type' is the type of joystick or pad attached: - - Type | Joystick/Pad - -------------------- - 0 | None - 1 | Multisystem 1-button joystick - 2 | Multisystem 2-button joystick - 3 | Genesis pad (3+1 buttons) - 5 | Genesis pad (5+1 buttons) - 6 | Genesis pad (6+2 buttons) - 7 | Saturn pad (8 buttons) - 8 | Multisystem 1-button joystick (v0.8.0.2 pin-out) - 9 | Two Multisystem 1-button joysticks (v0.8.0.2 pin-out) - 10 | Amiga CD32 pad - - Should you want to use more than one of these joysticks/pads at once, you -can use db9.dev2 and db9.dev3 as additional command line parameters for two -more joysticks/pads. - -3.3 turbografx.c -~~~~~~~~~~~~~~~~ - The turbografx.c driver uses a very simple kernel/module command line: - - turbografx.map=port,js1,js2,js3,js4,js5,js6,js7 - - Where 'port' is the number of the parport interface (eg. 0 for parport0). - - 'jsX' is the number of buttons the Multisystem joysticks connected to the -interface ports 1-7 have. For a standard multisystem joystick, this is 1. - - Should you want to use more than one of these interfaces at once, you can -use turbografx.map2 and turbografx.map3 as additional command line parameters -for two more interfaces. - -3.4 PC parallel port pinout -~~~~~~~~~~~~~~~~~~~~~~~~~~~ - .----------------------------------------. - At the PC: \ 13 12 11 10 9 8 7 6 5 4 3 2 1 / - \ 25 24 23 22 21 20 19 18 17 16 15 14 / - ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - - Pin | Name | Description - ~~~~~~|~~~~~~~~~|~~~~~~~~~~ - 1 | /STROBE | Strobe - 2-9 | D0-D7 | Data Bit 0-7 - 10 | /ACK | Acknowledge - 11 | BUSY | Busy - 12 | PE | Paper End - 13 | SELIN | Select In - 14 | /AUTOFD | Autofeed - 15 | /ERROR | Error - 16 | /INIT | Initialize - 17 | /SEL | Select - 18-25 | GND | Signal Ground - -3.5 End -~~~~~~~ - That's all, folks! Have fun! diff --git a/Documentation/input/joystick.txt b/Documentation/input/joystick.txt deleted file mode 100644 index 8d027dc86c1f..000000000000 --- a/Documentation/input/joystick.txt +++ /dev/null @@ -1,586 +0,0 @@ - Linux Joystick driver v2.0.0 - (c) 1996-2000 Vojtech Pavlik <vojtech@ucw.cz> - Sponsored by SuSE ----------------------------------------------------------------------------- - -0. Disclaimer -~~~~~~~~~~~~~ - This program is free software; you can redistribute it and/or modify it -under the terms of the GNU General Public License as published by the Free -Software Foundation; either version 2 of the License, or (at your option) -any later version. - - This program is distributed in the hope that it will be useful, but -WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -more details. - - You should have received a copy of the GNU General Public License along -with this program; if not, write to the Free Software Foundation, Inc., 59 -Temple Place, Suite 330, Boston, MA 02111-1307 USA - - Should you need to contact me, the author, you can do so either by e-mail -- mail your message to <vojtech@ucw.cz>, or by paper mail: Vojtech Pavlik, -Simunkova 1594, Prague 8, 182 00 Czech Republic - - For your convenience, the GNU General Public License version 2 is included -in the package: See the file COPYING. - -1. Intro -~~~~~~~~ - The joystick driver for Linux provides support for a variety of joysticks -and similar devices. It is based on a larger project aiming to support all -input devices in Linux. - - Should you encounter any problems while using the driver, or joysticks -this driver can't make complete use of, I'm very interested in hearing about -them. Bug reports and success stories are also welcome. - - The input project website is at: - - http://atrey.karlin.mff.cuni.cz/~vojtech/input/ - - There is also a mailing list for the driver at: - - listproc@atrey.karlin.mff.cuni.cz - -send "subscribe linux-joystick Your Name" to subscribe to it. - -2. Usage -~~~~~~~~ - For basic usage you just choose the right options in kernel config and -you should be set. - -2.1 inpututils -~~~~~~~~~~~~~~ -For testing and other purposes (for example serial devices), a set of -utilities is available at the abovementioned website. I suggest you download -and install it before going on. - -2.2 Device nodes -~~~~~~~~~~~~~~~~ -For applications to be able to use the joysticks, -you'll have to manually create these nodes in /dev: - -cd /dev -rm js* -mkdir input -mknod input/js0 c 13 0 -mknod input/js1 c 13 1 -mknod input/js2 c 13 2 -mknod input/js3 c 13 3 -ln -s input/js0 js0 -ln -s input/js1 js1 -ln -s input/js2 js2 -ln -s input/js3 js3 - -For testing with inpututils it's also convenient to create these: - -mknod input/event0 c 13 64 -mknod input/event1 c 13 65 -mknod input/event2 c 13 66 -mknod input/event3 c 13 67 - -2.4 Modules needed -~~~~~~~~~~~~~~~~~~ - For all joystick drivers to function, you'll need the userland interface -module in kernel, either loaded or compiled in: - - modprobe joydev - - For gameport joysticks, you'll have to load the gameport driver as well; - - modprobe ns558 - - And for serial port joysticks, you'll need the serial input line -discipline module loaded and the inputattach utility started: - - modprobe serport - inputattach -xxx /dev/tts/X & - - In addition to that, you'll need the joystick driver module itself, most -usually you'll have an analog joystick: - - modprobe analog - - For automatic module loading, something like this might work - tailor to -your needs: - - alias tty-ldisc-2 serport - alias char-major-13 input - above input joydev ns558 analog - options analog map=gamepad,none,2btn - -2.5 Verifying that it works -~~~~~~~~~~~~~~~~~~~~~~~~~~~ - For testing the joystick driver functionality, there is the jstest -program in the utilities package. You run it by typing: - - jstest /dev/input/js0 - - And it should show a line with the joystick values, which update as you -move the stick, and press its buttons. The axes should all be zero when the -joystick is in the center position. They should not jitter by themselves to -other close values, and they also should be steady in any other position of -the stick. They should have the full range from -32767 to 32767. If all this -is met, then it's all fine, and you can play the games. :) - - If it's not, then there might be a problem. Try to calibrate the joystick, -and if it still doesn't work, read the drivers section of this file, the -troubleshooting section, and the FAQ. - -2.6. Calibration -~~~~~~~~~~~~~~~~ - For most joysticks you won't need any manual calibration, since the -joystick should be autocalibrated by the driver automagically. However, with -some analog joysticks, that either do not use linear resistors, or if you -want better precision, you can use the jscal program - - jscal -c /dev/input/js0 - - included in the joystick package to set better correction coefficients than -what the driver would choose itself. - - After calibrating the joystick you can verify if you like the new -calibration using the jstest command, and if you do, you then can save the -correction coefficients into a file - - jscal -p /dev/input/js0 > /etc/joystick.cal - - And add a line to your rc script executing that file - - source /etc/joystick.cal - - This way, after the next reboot your joystick will remain calibrated. You -can also add the jscal -p line to your shutdown script. - - -3. HW specific driver information -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -In this section each of the separate hardware specific drivers is described. - -3.1 Analog joysticks -~~~~~~~~~~~~~~~~~~~~ - The analog.c uses the standard analog inputs of the gameport, and thus -supports all standard joysticks and gamepads. It uses a very advanced -routine for this, allowing for data precision that can't be found on any -other system. - - It also supports extensions like additional hats and buttons compatible -with CH Flightstick Pro, ThrustMaster FCS or 6 and 8 button gamepads. Saitek -Cyborg 'digital' joysticks are also supported by this driver, because -they're basically souped up CHF sticks. - - However the only types that can be autodetected are: - -* 2-axis, 4-button joystick -* 3-axis, 4-button joystick -* 4-axis, 4-button joystick -* Saitek Cyborg 'digital' joysticks - - For other joystick types (more/less axes, hats, and buttons) support -you'll need to specify the types either on the kernel command line or on the -module command line, when inserting analog into the kernel. The -parameters are: - - analog.map=<type1>,<type2>,<type3>,.... - - 'type' is type of the joystick from the table below, defining joysticks -present on gameports in the system, starting with gameport0, second 'type' -entry defining joystick on gameport1 and so on. - - Type | Meaning - ----------------------------------- - none | No analog joystick on that port - auto | Autodetect joystick - 2btn | 2-button n-axis joystick - y-joy | Two 2-button 2-axis joysticks on an Y-cable - y-pad | Two 2-button 2-axis gamepads on an Y-cable - fcs | Thrustmaster FCS compatible joystick - chf | Joystick with a CH Flightstick compatible hat - fullchf | CH Flightstick compatible with two hats and 6 buttons - gamepad | 4/6-button n-axis gamepad - gamepad8 | 8-button 2-axis gamepad - - In case your joystick doesn't fit in any of the above categories, you can -specify the type as a number by combining the bits in the table below. This -is not recommended unless you really know what are you doing. It's not -dangerous, but not simple either. - - Bit | Meaning - -------------------------- - 0 | Axis X1 - 1 | Axis Y1 - 2 | Axis X2 - 3 | Axis Y2 - 4 | Button A - 5 | Button B - 6 | Button C - 7 | Button D - 8 | CHF Buttons X and Y - 9 | CHF Hat 1 - 10 | CHF Hat 2 - 11 | FCS Hat - 12 | Pad Button X - 13 | Pad Button Y - 14 | Pad Button U - 15 | Pad Button V - 16 | Saitek F1-F4 Buttons - 17 | Saitek Digital Mode - 19 | GamePad - 20 | Joy2 Axis X1 - 21 | Joy2 Axis Y1 - 22 | Joy2 Axis X2 - 23 | Joy2 Axis Y2 - 24 | Joy2 Button A - 25 | Joy2 Button B - 26 | Joy2 Button C - 27 | Joy2 Button D - 31 | Joy2 GamePad - -3.2 Microsoft SideWinder joysticks -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - Microsoft 'Digital Overdrive' protocol is supported by the sidewinder.c -module. All currently supported joysticks: - -* Microsoft SideWinder 3D Pro -* Microsoft SideWinder Force Feedback Pro -* Microsoft SideWinder Force Feedback Wheel -* Microsoft SideWinder FreeStyle Pro -* Microsoft SideWinder GamePad (up to four, chained) -* Microsoft SideWinder Precision Pro -* Microsoft SideWinder Precision Pro USB - - are autodetected, and thus no module parameters are needed. - - There is one caveat with the 3D Pro. There are 9 buttons reported, -although the joystick has only 8. The 9th button is the mode switch on the -rear side of the joystick. However, moving it, you'll reset the joystick, -and make it unresponsive for about a one third of a second. Furthermore, the -joystick will also re-center itself, taking the position it was in during -this time as a new center position. Use it if you want, but think first. - - The SideWinder Standard is not a digital joystick, and thus is supported -by the analog driver described above. - -3.3 Logitech ADI devices -~~~~~~~~~~~~~~~~~~~~~~~~ - Logitech ADI protocol is supported by the adi.c module. It should support -any Logitech device using this protocol. This includes, but is not limited -to: - -* Logitech CyberMan 2 -* Logitech ThunderPad Digital -* Logitech WingMan Extreme Digital -* Logitech WingMan Formula -* Logitech WingMan Interceptor -* Logitech WingMan GamePad -* Logitech WingMan GamePad USB -* Logitech WingMan GamePad Extreme -* Logitech WingMan Extreme Digital 3D - - ADI devices are autodetected, and the driver supports up to two (any -combination of) devices on a single gameport, using an Y-cable or chained -together. - - Logitech WingMan Joystick, Logitech WingMan Attack, Logitech WingMan -Extreme and Logitech WingMan ThunderPad are not digital joysticks and are -handled by the analog driver described above. Logitech WingMan Warrior and -Logitech Magellan are supported by serial drivers described below. Logitech -WingMan Force and Logitech WingMan Formula Force are supported by the -I-Force driver described below. Logitech CyberMan is not supported yet. - -3.4 Gravis GrIP -~~~~~~~~~~~~~~~ - Gravis GrIP protocol is supported by the grip.c module. It currently -supports: - -* Gravis GamePad Pro -* Gravis BlackHawk Digital -* Gravis Xterminator -* Gravis Xterminator DualControl - - All these devices are autodetected, and you can even use any combination -of up to two of these pads either chained together or using an Y-cable on a -single gameport. - -GrIP MultiPort isn't supported yet. Gravis Stinger is a serial device and is -supported by the stinger driver. Other Gravis joysticks are supported by the -analog driver. - -3.5 FPGaming A3D and MadCatz A3D -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - The Assassin 3D protocol created by FPGaming, is used both by FPGaming -themselves and is licensed to MadCatz. A3D devices are supported by the -a3d.c module. It currently supports: - -* FPGaming Assassin 3D -* MadCatz Panther -* MadCatz Panther XL - - All these devices are autodetected. Because the Assassin 3D and the Panther -allow connecting analog joysticks to them, you'll need to load the analog -driver as well to handle the attached joysticks. - - The trackball should work with USB mousedev module as a normal mouse. See -the USB documentation for how to setup an USB mouse. - -3.6 ThrustMaster DirectConnect (BSP) -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - The TM DirectConnect (BSP) protocol is supported by the tmdc.c -module. This includes, but is not limited to: - -* ThrustMaster Millennium 3D Interceptor -* ThrustMaster 3D Rage Pad -* ThrustMaster Fusion Digital Game Pad - - Devices not directly supported, but hopefully working are: - -* ThrustMaster FragMaster -* ThrustMaster Attack Throttle - - If you have one of these, contact me. - - TMDC devices are autodetected, and thus no parameters to the module -are needed. Up to two TMDC devices can be connected to one gameport, using -an Y-cable. - -3.7 Creative Labs Blaster -~~~~~~~~~~~~~~~~~~~~~~~~~ - The Blaster protocol is supported by the cobra.c module. It supports only -the: - -* Creative Blaster GamePad Cobra - - Up to two of these can be used on a single gameport, using an Y-cable. - -3.8 Genius Digital joysticks -~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - The Genius digitally communicating joysticks are supported by the gf2k.c -module. This includes: - -* Genius Flight2000 F-23 joystick -* Genius Flight2000 F-31 joystick -* Genius G-09D gamepad - - Other Genius digital joysticks are not supported yet, but support can be -added fairly easily. - -3.9 InterAct Digital joysticks -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - The InterAct digitally communicating joysticks are supported by the -interact.c module. This includes: - -* InterAct HammerHead/FX gamepad -* InterAct ProPad8 gamepad - - Other InterAct digital joysticks are not supported yet, but support can be -added fairly easily. - -3.10 PDPI Lightning 4 gamecards -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - PDPI Lightning 4 gamecards are supported by the lightning.c module. -Once the module is loaded, the analog driver can be used to handle the -joysticks. Digitally communicating joystick will work only on port 0, while -using Y-cables, you can connect up to 8 analog joysticks to a single L4 -card, 16 in case you have two in your system. - -3.11 Trident 4DWave / Aureal Vortex -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - Soundcards with a Trident 4DWave DX/NX or Aureal Vortex/Vortex2 chipsets -provide an "Enhanced Game Port" mode where the soundcard handles polling the -joystick. This mode is supported by the pcigame.c module. Once loaded the -analog driver can use the enhanced features of these gameports.. - -3.13 Crystal SoundFusion -~~~~~~~~~~~~~~~~~~~~~~~~ - Soundcards with Crystal SoundFusion chipsets provide an "Enhanced Game -Port", much like the 4DWave or Vortex above. This, and also the normal mode -for the port of the SoundFusion is supported by the cs461x.c module. - -3.14 SoundBlaster Live! -~~~~~~~~~~~~~~~~~~~~~~~~ - The Live! has a special PCI gameport, which, although it doesn't provide -any "Enhanced" stuff like 4DWave and friends, is quite a bit faster than -its ISA counterparts. It also requires special support, hence the -emu10k1-gp.c module for it instead of the normal ns558.c one. - -3.15 SoundBlaster 64 and 128 - ES1370 and ES1371, ESS Solo1 and S3 SonicVibes -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - These PCI soundcards have specific gameports. They are handled by the -sound drivers themselves. Make sure you select gameport support in the -joystick menu and sound card support in the sound menu for your appropriate -card. - -3.16 Amiga -~~~~~~~~~~ - Amiga joysticks, connected to an Amiga, are supported by the amijoy.c -driver. Since they can't be autodetected, the driver has a command line. - - amijoy.map=<a>,<b> - - a and b define the joysticks connected to the JOY0DAT and JOY1DAT ports of -the Amiga. - - Value | Joystick type - --------------------- - 0 | None - 1 | 1-button digital joystick - - No more joystick types are supported now, but that should change in the -future if I get an Amiga in the reach of my fingers. - -3.17 Game console and 8-bit pads and joysticks -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -See joystick-parport.txt for more info. - -3.18 SpaceTec/LabTec devices -~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - SpaceTec serial devices communicate using the SpaceWare protocol. It is -supported by the spaceorb.c and spaceball.c drivers. The devices currently -supported by spaceorb.c are: - -* SpaceTec SpaceBall Avenger -* SpaceTec SpaceOrb 360 - -Devices currently supported by spaceball.c are: - -* SpaceTec SpaceBall 4000 FLX - - In addition to having the spaceorb/spaceball and serport modules in the -kernel, you also need to attach a serial port to it. to do that, run the -inputattach program: - - inputattach --spaceorb /dev/tts/x & -or - inputattach --spaceball /dev/tts/x & - -where /dev/tts/x is the serial port which the device is connected to. After -doing this, the device will be reported and will start working. - - There is one caveat with the SpaceOrb. The button #6, the on the bottom -side of the orb, although reported as an ordinary button, causes internal -recentering of the spaceorb, moving the zero point to the position in which -the ball is at the moment of pressing the button. So, think first before -you bind it to some other function. - -SpaceTec SpaceBall 2003 FLX and 3003 FLX are not supported yet. - -3.19 Logitech SWIFT devices -~~~~~~~~~~~~~~~~~~~~~~~~~~~ - The SWIFT serial protocol is supported by the warrior.c module. It -currently supports only the: - -* Logitech WingMan Warrior - -but in the future, Logitech CyberMan (the original one, not CM2) could be -supported as well. To use the module, you need to run inputattach after you -insert/compile the module into your kernel: - - inputattach --warrior /dev/tts/x & - -/dev/tts/x is the serial port your Warrior is attached to. - -3.20 Magellan / Space Mouse -~~~~~~~~~~~~~~~~~~~~~~~~~~~ - The Magellan (or Space Mouse), manufactured by LogiCad3d (formerly Space -Systems), for many other companies (Logitech, HP, ...) is supported by the -joy-magellan module. It currently supports only the: - -* Magellan 3D -* Space Mouse - -models, the additional buttons on the 'Plus' versions are not supported yet. - - To use it, you need to attach the serial port to the driver using the - - inputattach --magellan /dev/tts/x & - -command. After that the Magellan will be detected, initialized, will beep, -and the /dev/input/jsX device should become usable. - -3.21 I-Force devices -~~~~~~~~~~~~~~~~~~~~ - All I-Force devices are supported by the iforce module. This includes: - -* AVB Mag Turbo Force -* AVB Top Shot Pegasus -* AVB Top Shot Force Feedback Racing Wheel -* Logitech WingMan Force -* Logitech WingMan Force Wheel -* Guillemot Race Leader Force Feedback -* Guillemot Force Feedback Racing Wheel -* Thrustmaster Motor Sport GT - - To use it, you need to attach the serial port to the driver using the - - inputattach --iforce /dev/tts/x & - -command. After that the I-Force device will be detected, and the -/dev/input/jsX device should become usable. - - In case you're using the device via the USB port, the inputattach command -isn't needed. - - The I-Force driver now supports force feedback via the event interface. - - Please note that Logitech WingMan *3D devices are _not_ supported by this -module, rather by hid. Force feedback is not supported for those devices. -Logitech gamepads are also hid devices. - -3.22 Gravis Stinger gamepad -~~~~~~~~~~~~~~~~~~~~~~~~~~~ - The Gravis Stinger serial port gamepad, designed for use with laptop -computers, is supported by the stinger.c module. To use it, attach the -serial port to the driver using: - - inputattach --stinger /dev/tty/x & - -where x is the number of the serial port. - -4. Troubleshooting -~~~~~~~~~~~~~~~~~~ - There is quite a high probability that you run into some problems. For -testing whether the driver works, if in doubt, use the jstest utility in -some of its modes. The most useful modes are "normal" - for the 1.x -interface, and "old" for the "0.x" interface. You run it by typing: - - jstest --normal /dev/input/js0 - jstest --old /dev/input/js0 - - Additionally you can do a test with the evtest utility: - - evtest /dev/input/event0 - - Oh, and read the FAQ! :) - -5. FAQ -~~~~~~ -Q: Running 'jstest /dev/input/js0' results in "File not found" error. What's the - cause? -A: The device files don't exist. Create them (see section 2.2). - -Q: Is it possible to connect my old Atari/Commodore/Amiga/console joystick - or pad that uses a 9-pin D-type cannon connector to the serial port of my - PC? -A: Yes, it is possible, but it'll burn your serial port or the pad. It - won't work, of course. - -Q: My joystick doesn't work with Quake / Quake 2. What's the cause? -A: Quake / Quake 2 don't support joystick. Use joy2key to simulate keypresses - for them. - -6. Programming Interface -~~~~~~~~~~~~~~~~~~~~~~~~ - The 1.0 driver uses a new, event based approach to the joystick driver. -Instead of the user program polling for the joystick values, the joystick -driver now reports only any changes of its state. See joystick-api.txt, -joystick.h and jstest.c included in the joystick package for more -information. The joystick device can be used in either blocking or -nonblocking mode and supports select() calls. - - For backward compatibility the old (v0.x) interface is still included. -Any call to the joystick driver using the old interface will return values -that are compatible to the old interface. This interface is still limited -to 2 axes, and applications using it usually decode only 2 buttons, although -the driver provides up to 32. diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.rst index c51f1146f3bd..8035868c56bc 100644 --- a/Documentation/input/multi-touch-protocol.txt +++ b/Documentation/input/multi-touch-protocol.rst @@ -1,6 +1,10 @@ +.. include:: <isonum.txt> + +========================= Multi-touch (MT) Protocol -------------------------- - Copyright (C) 2009-2010 Henrik Rydberg <rydberg@euromail.se> +========================= + +:Copyright: |copy| 2009-2010 Henrik Rydberg <rydberg@euromail.se> Introduction @@ -18,6 +22,9 @@ describes how to send the raw data for all contacts to the receiver. For devices capable of tracking identifiable contacts (type B), the protocol describes how to send updates for individual contacts via event slots. +.. note:: + MT potocol type A is obsolete, all kernel drivers have been + converted to use type B. Protocol Usage -------------- @@ -47,12 +54,12 @@ The main difference between the stateless type A protocol and the stateful type B slot protocol lies in the usage of identifiable contacts to reduce the amount of data sent to userspace. The slot protocol requires the use of the ABS_MT_TRACKING_ID, either provided by the hardware or computed from -the raw data [5]. +the raw data [#f5]_. For type A devices, the kernel driver should generate an arbitrary enumeration of the full set of anonymous contacts currently on the surface. The order in which the packets appear in the event stream is not -important. Event filtering and finger tracking is left to user space [3]. +important. Event filtering and finger tracking is left to user space [#f3]_. For type B devices, the kernel driver should associate a slot with each identified contact, and use that slot to propagate changes for the contact. @@ -86,7 +93,7 @@ Protocol Example A ------------------ Here is what a minimal event sequence for a two-contact touch would look -like for a type A device: +like for a type A device:: ABS_MT_POSITION_X x[0] ABS_MT_POSITION_Y y[0] @@ -100,14 +107,14 @@ The sequence after moving one of the contacts looks exactly the same; the raw data for all present contacts are sent between every synchronization with SYN_REPORT. -Here is the sequence after lifting the first contact: +Here is the sequence after lifting the first contact:: ABS_MT_POSITION_X x[1] ABS_MT_POSITION_Y y[1] SYN_MT_REPORT SYN_REPORT -And here is the sequence after lifting the second contact: +And here is the sequence after lifting the second contact:: SYN_MT_REPORT SYN_REPORT @@ -122,7 +129,7 @@ Protocol Example B ------------------ Here is what a minimal event sequence for a two-contact touch would look -like for a type B device: +like for a type B device:: ABS_MT_SLOT 0 ABS_MT_TRACKING_ID 45 @@ -134,13 +141,13 @@ like for a type B device: ABS_MT_POSITION_Y y[1] SYN_REPORT -Here is the sequence after moving contact 45 in the x direction: +Here is the sequence after moving contact 45 in the x direction:: ABS_MT_SLOT 0 ABS_MT_POSITION_X x[0] SYN_REPORT -Here is the sequence after lifting the contact in slot 0: +Here is the sequence after lifting the contact in slot 0:: ABS_MT_TRACKING_ID -1 SYN_REPORT @@ -149,7 +156,7 @@ The slot being modified is already 0, so the ABS_MT_SLOT is omitted. The message removes the association of slot 0 with contact 45, thereby destroying contact 45 and freeing slot 0 to be reused for another contact. -Finally, here is the sequence after lifting the second contact: +Finally, here is the sequence after lifting the second contact:: ABS_MT_SLOT 1 ABS_MT_TRACKING_ID -1 @@ -181,6 +188,8 @@ ABS_MT_PRESSURE may be used to provide the pressure on the contact area instead. Devices capable of contact hovering can use ABS_MT_DISTANCE to indicate the distance between the contact and the surface. +:: + Linux MT Win8 __________ _______________________ @@ -212,7 +221,7 @@ via ABS_MT_BLOB_ID. The ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a finger or a pen or something else. Finally, the ABS_MT_TRACKING_ID event -may be used to track identified contacts over time [5]. +may be used to track identified contacts over time [#f5]_. In the type B protocol, ABS_MT_TOOL_TYPE and ABS_MT_TRACKING_ID are implicitly handled by input core; drivers should instead call @@ -223,117 +232,103 @@ Event Semantics --------------- ABS_MT_TOUCH_MAJOR - -The length of the major axis of the contact. The length should be given in -surface units. If the surface has an X times Y resolution, the largest -possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal [4]. + The length of the major axis of the contact. The length should be given in + surface units. If the surface has an X times Y resolution, the largest + possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal [#f4]_. ABS_MT_TOUCH_MINOR - -The length, in surface units, of the minor axis of the contact. If the -contact is circular, this event can be omitted [4]. + The length, in surface units, of the minor axis of the contact. If the + contact is circular, this event can be omitted [#f4]_. ABS_MT_WIDTH_MAJOR - -The length, in surface units, of the major axis of the approaching -tool. This should be understood as the size of the tool itself. The -orientation of the contact and the approaching tool are assumed to be the -same [4]. + The length, in surface units, of the major axis of the approaching + tool. This should be understood as the size of the tool itself. The + orientation of the contact and the approaching tool are assumed to be the + same [#f4]_. ABS_MT_WIDTH_MINOR + The length, in surface units, of the minor axis of the approaching + tool. Omit if circular [#f4]_. -The length, in surface units, of the minor axis of the approaching -tool. Omit if circular [4]. - -The above four values can be used to derive additional information about -the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates -the notion of pressure. The fingers of the hand and the palm all have -different characteristic widths. + The above four values can be used to derive additional information about + the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates + the notion of pressure. The fingers of the hand and the palm all have + different characteristic widths. ABS_MT_PRESSURE - -The pressure, in arbitrary units, on the contact area. May be used instead -of TOUCH and WIDTH for pressure-based devices or any device with a spatial -signal intensity distribution. + The pressure, in arbitrary units, on the contact area. May be used instead + of TOUCH and WIDTH for pressure-based devices or any device with a spatial + signal intensity distribution. ABS_MT_DISTANCE - -The distance, in surface units, between the contact and the surface. Zero -distance means the contact is touching the surface. A positive number means -the contact is hovering above the surface. + The distance, in surface units, between the contact and the surface. Zero + distance means the contact is touching the surface. A positive number means + the contact is hovering above the surface. ABS_MT_ORIENTATION - -The orientation of the touching ellipse. The value should describe a signed -quarter of a revolution clockwise around the touch center. The signed value -range is arbitrary, but zero should be returned for an ellipse aligned with -the Y axis of the surface, a negative value when the ellipse is turned to -the left, and a positive value when the ellipse is turned to the -right. When completely aligned with the X axis, the range max should be -returned. - -Touch ellipsis are symmetrical by default. For devices capable of true 360 -degree orientation, the reported orientation must exceed the range max to -indicate more than a quarter of a revolution. For an upside-down finger, -range max * 2 should be returned. - -Orientation can be omitted if the touch area is circular, or if the -information is not available in the kernel driver. Partial orientation -support is possible if the device can distinguish between the two axis, but -not (uniquely) any values in between. In such cases, the range of -ABS_MT_ORIENTATION should be [0, 1] [4]. + The orientation of the touching ellipse. The value should describe a signed + quarter of a revolution clockwise around the touch center. The signed value + range is arbitrary, but zero should be returned for an ellipse aligned with + the Y axis of the surface, a negative value when the ellipse is turned to + the left, and a positive value when the ellipse is turned to the + right. When completely aligned with the X axis, the range max should be + returned. + + Touch ellipsis are symmetrical by default. For devices capable of true 360 + degree orientation, the reported orientation must exceed the range max to + indicate more than a quarter of a revolution. For an upside-down finger, + range max * 2 should be returned. + + Orientation can be omitted if the touch area is circular, or if the + information is not available in the kernel driver. Partial orientation + support is possible if the device can distinguish between the two axis, but + not (uniquely) any values in between. In such cases, the range of + ABS_MT_ORIENTATION should be [0, 1] [#f4]_. ABS_MT_POSITION_X - -The surface X coordinate of the center of the touching ellipse. + The surface X coordinate of the center of the touching ellipse. ABS_MT_POSITION_Y - -The surface Y coordinate of the center of the touching ellipse. + The surface Y coordinate of the center of the touching ellipse. ABS_MT_TOOL_X - -The surface X coordinate of the center of the approaching tool. Omit if -the device cannot distinguish between the intended touch point and the -tool itself. + The surface X coordinate of the center of the approaching tool. Omit if + the device cannot distinguish between the intended touch point and the + tool itself. ABS_MT_TOOL_Y + The surface Y coordinate of the center of the approaching tool. Omit if the + device cannot distinguish between the intended touch point and the tool + itself. -The surface Y coordinate of the center of the approaching tool. Omit if the -device cannot distinguish between the intended touch point and the tool -itself. - -The four position values can be used to separate the position of the touch -from the position of the tool. If both positions are present, the major -tool axis points towards the touch point [1]. Otherwise, the tool axes are -aligned with the touch axes. + The four position values can be used to separate the position of the touch + from the position of the tool. If both positions are present, the major + tool axis points towards the touch point [#f1]_. Otherwise, the tool axes are + aligned with the touch axes. ABS_MT_TOOL_TYPE - -The type of approaching tool. A lot of kernel drivers cannot distinguish -between different tool types, such as a finger or a pen. In such cases, the -event should be omitted. The protocol currently supports MT_TOOL_FINGER, -MT_TOOL_PEN, and MT_TOOL_PALM [2]. For type B devices, this event is handled -by input core; drivers should instead use input_mt_report_slot_state(). -A contact's ABS_MT_TOOL_TYPE may change over time while still touching the -device, because the firmware may not be able to determine which tool is being -used when it first appears. + The type of approaching tool. A lot of kernel drivers cannot distinguish + between different tool types, such as a finger or a pen. In such cases, the + event should be omitted. The protocol currently supports MT_TOOL_FINGER, + MT_TOOL_PEN, and MT_TOOL_PALM [#f2]_. For type B devices, this event is + handled by input core; drivers should instead use + input_mt_report_slot_state(). A contact's ABS_MT_TOOL_TYPE may change over + time while still touching the device, because the firmware may not be able + to determine which tool is being used when it first appears. ABS_MT_BLOB_ID - -The BLOB_ID groups several packets together into one arbitrarily shaped -contact. The sequence of points forms a polygon which defines the shape of -the contact. This is a low-level anonymous grouping for type A devices, and -should not be confused with the high-level trackingID [5]. Most type A -devices do not have blob capability, so drivers can safely omit this event. + The BLOB_ID groups several packets together into one arbitrarily shaped + contact. The sequence of points forms a polygon which defines the shape of + the contact. This is a low-level anonymous grouping for type A devices, and + should not be confused with the high-level trackingID [#f5]_. Most type A + devices do not have blob capability, so drivers can safely omit this event. ABS_MT_TRACKING_ID - -The TRACKING_ID identifies an initiated contact throughout its life cycle -[5]. The value range of the TRACKING_ID should be large enough to ensure -unique identification of a contact maintained over an extended period of -time. For type B devices, this event is handled by input core; drivers -should instead use input_mt_report_slot_state(). + The TRACKING_ID identifies an initiated contact throughout its life cycle + [#f5]_. The value range of the TRACKING_ID should be large enough to ensure + unique identification of a contact maintained over an extended period of + time. For type B devices, this event is handled by input core; drivers + should instead use input_mt_report_slot_state(). Event Computation @@ -346,7 +341,7 @@ this section gives recipes for how to compute certain events. For devices reporting contacts as rectangular shapes, signed orientation cannot be obtained. Assuming X and Y are the lengths of the sides of the touching rectangle, here is a simple formula that retains the most -information possible: +information possible:: ABS_MT_TOUCH_MAJOR := max(X, Y) ABS_MT_TOUCH_MINOR := min(X, Y) @@ -356,7 +351,7 @@ The range of ABS_MT_ORIENTATION should be set to [0, 1], to indicate that the device can distinguish between a finger along the Y axis (0) and a finger along the X axis (1). -For win8 devices with both T and C coordinates, the position mapping is +For win8 devices with both T and C coordinates, the position mapping is:: ABS_MT_POSITION_X := T_X ABS_MT_POSITION_Y := T_Y @@ -365,7 +360,7 @@ For win8 devices with both T and C coordinates, the position mapping is Unfortunately, there is not enough information to specify both the touching ellipse and the tool ellipse, so one has to resort to approximations. One -simple scheme, which is compatible with earlier usage, is: +simple scheme, which is compatible with earlier usage, is:: ABS_MT_TOUCH_MAJOR := min(X, Y) ABS_MT_TOUCH_MINOR := <not used> @@ -386,7 +381,7 @@ The process of finger tracking, i.e., to assign a unique trackingID to each initiated contact on the surface, is a Euclidian Bipartite Matching problem. At each event synchronization, the set of actual contacts is matched to the set of contacts from the previous synchronization. A full -implementation can be found in [3]. +implementation can be found in [#f3]_. Gestures @@ -408,11 +403,8 @@ in a finger packet must not be recognized as single-touch events. For type A devices, all finger data bypasses input filtering, since subsequent events of the same type refer to different fingers. -For example usage of the type A protocol, see the bcm5974 driver. For -example usage of the type B protocol, see the hid-egalax driver. - -[1] Also, the difference (TOOL_X - POSITION_X) can be used to model tilt. -[2] The list can of course be extended. -[3] The mtdev project: http://bitmath.org/code/mtdev/. -[4] See the section on event computation. -[5] See the section on finger tracking. +.. [#f1] Also, the difference (TOOL_X - POSITION_X) can be used to model tilt. +.. [#f2] The list can of course be extended. +.. [#f3] The mtdev project: http://bitmath.org/code/mtdev/. +.. [#f4] See the section on event computation. +.. [#f5] See the section on finger tracking. diff --git a/Documentation/input/notifier.txt b/Documentation/input/notifier.rst index 95172ca6f3d2..161350cb865e 100644 --- a/Documentation/input/notifier.txt +++ b/Documentation/input/notifier.rst @@ -1,4 +1,6 @@ +================= Keyboard notifier +================= One can use register_keyboard_notifier to get called back on keyboard events (see kbd_keycode() function for details). The passed structure is @@ -23,9 +25,9 @@ For each kind of event but the last, the callback may return NOTIFY_STOP in order to "eat" the event: the notify loop is stopped and the keyboard event is dropped. -In a rough C snippet, we have: +In a rough C snippet, we have:: -kbd_keycode(keycode) { + kbd_keycode(keycode) { ... params.value = keycode; if (notifier_call_chain(KBD_KEYCODE,¶ms) == NOTIFY_STOP) @@ -47,6 +49,6 @@ kbd_keycode(keycode) { return; apply keysym; notifier_call_chain(KBD_POST_KEYSYM,¶ms); -} + } -NOTE: This notifier is usually called from interrupt context. +.. note:: This notifier is usually called from interrupt context. diff --git a/Documentation/input/sentelic.txt b/Documentation/input/sentelic.txt deleted file mode 100644 index 89251e2a3eba..000000000000 --- a/Documentation/input/sentelic.txt +++ /dev/null @@ -1,873 +0,0 @@ -Copyright (C) 2002-2011 Sentelic Corporation. -Last update: Dec-07-2011 - -============================================================================== -* Finger Sensing Pad Intellimouse Mode(scrolling wheel, 4th and 5th buttons) -============================================================================== -A) MSID 4: Scrolling wheel mode plus Forward page(4th button) and Backward - page (5th button) -@1. Set sample rate to 200; -@2. Set sample rate to 200; -@3. Set sample rate to 80; -@4. Issuing the "Get device ID" command (0xF2) and waits for the response; -@5. FSP will respond 0x04. - -Packet 1 - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |Y|X|y|x|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 | | |B|F|W|W|W|W| - |---------------| |---------------| |---------------| |---------------| - -Byte 1: Bit7 => Y overflow - Bit6 => X overflow - Bit5 => Y sign bit - Bit4 => X sign bit - Bit3 => 1 - Bit2 => Middle Button, 1 is pressed, 0 is not pressed. - Bit1 => Right Button, 1 is pressed, 0 is not pressed. - Bit0 => Left Button, 1 is pressed, 0 is not pressed. -Byte 2: X Movement(9-bit 2's complement integers) -Byte 3: Y Movement(9-bit 2's complement integers) -Byte 4: Bit3~Bit0 => the scrolling wheel's movement since the last data report. - valid values, -8 ~ +7 - Bit4 => 1 = 4th mouse button is pressed, Forward one page. - 0 = 4th mouse button is not pressed. - Bit5 => 1 = 5th mouse button is pressed, Backward one page. - 0 = 5th mouse button is not pressed. - -B) MSID 6: Horizontal and Vertical scrolling. -@ Set bit 1 in register 0x40 to 1 - -# FSP replaces scrolling wheel's movement as 4 bits to show horizontal and - vertical scrolling. - -Packet 1 - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |Y|X|y|x|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 | | |B|F|r|l|u|d| - |---------------| |---------------| |---------------| |---------------| - -Byte 1: Bit7 => Y overflow - Bit6 => X overflow - Bit5 => Y sign bit - Bit4 => X sign bit - Bit3 => 1 - Bit2 => Middle Button, 1 is pressed, 0 is not pressed. - Bit1 => Right Button, 1 is pressed, 0 is not pressed. - Bit0 => Left Button, 1 is pressed, 0 is not pressed. -Byte 2: X Movement(9-bit 2's complement integers) -Byte 3: Y Movement(9-bit 2's complement integers) -Byte 4: Bit0 => the Vertical scrolling movement downward. - Bit1 => the Vertical scrolling movement upward. - Bit2 => the Horizontal scrolling movement leftward. - Bit3 => the Horizontal scrolling movement rightward. - Bit4 => 1 = 4th mouse button is pressed, Forward one page. - 0 = 4th mouse button is not pressed. - Bit5 => 1 = 5th mouse button is pressed, Backward one page. - 0 = 5th mouse button is not pressed. - -C) MSID 7: -# FSP uses 2 packets (8 Bytes) to represent Absolute Position. - so we have PACKET NUMBER to identify packets. - If PACKET NUMBER is 0, the packet is Packet 1. - If PACKET NUMBER is 1, the packet is Packet 2. - Please count this number in program. - -# MSID6 special packet will be enable at the same time when enable MSID 7. - -============================================================================== -* Absolute position for STL3886-G0. -============================================================================== -@ Set bit 2 or 3 in register 0x40 to 1 -@ Set bit 6 in register 0x40 to 1 - -Packet 1 (ABSOLUTE POSITION) - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |0|1|V|1|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|d|u|X|X|Y|Y| - |---------------| |---------------| |---------------| |---------------| - -Byte 1: Bit7~Bit6 => 00, Normal data packet - => 01, Absolute coordination packet - => 10, Notify packet - Bit5 => valid bit - Bit4 => 1 - Bit3 => 1 - Bit2 => Middle Button, 1 is pressed, 0 is not pressed. - Bit1 => Right Button, 1 is pressed, 0 is not pressed. - Bit0 => Left Button, 1 is pressed, 0 is not pressed. -Byte 2: X coordinate (xpos[9:2]) -Byte 3: Y coordinate (ypos[9:2]) -Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) - Bit3~Bit2 => X coordinate (ypos[1:0]) - Bit4 => scroll up - Bit5 => scroll down - Bit6 => scroll left - Bit7 => scroll right - -Notify Packet for G0 - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |1|0|0|1|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |M|M|M|M|M|M|M|M| 4 |0|0|0|0|0|0|0|0| - |---------------| |---------------| |---------------| |---------------| - -Byte 1: Bit7~Bit6 => 00, Normal data packet - => 01, Absolute coordination packet - => 10, Notify packet - Bit5 => 0 - Bit4 => 1 - Bit3 => 1 - Bit2 => Middle Button, 1 is pressed, 0 is not pressed. - Bit1 => Right Button, 1 is pressed, 0 is not pressed. - Bit0 => Left Button, 1 is pressed, 0 is not pressed. -Byte 2: Message Type => 0x5A (Enable/Disable status packet) - Mode Type => 0xA5 (Normal/Icon mode status) -Byte 3: Message Type => 0x00 (Disabled) - => 0x01 (Enabled) - Mode Type => 0x00 (Normal) - => 0x01 (Icon) -Byte 4: Bit7~Bit0 => Don't Care - -============================================================================== -* Absolute position for STL3888-Ax. -============================================================================== -Packet 1 (ABSOLUTE POSITION) - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |0|1|V|A|1|L|0|1| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |x|x|y|y|X|X|Y|Y| - |---------------| |---------------| |---------------| |---------------| - -Byte 1: Bit7~Bit6 => 00, Normal data packet - => 01, Absolute coordination packet - => 10, Notify packet - => 11, Normal data packet with on-pad click - Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. - When both fingers are up, the last two reports have zero valid - bit. - Bit4 => arc - Bit3 => 1 - Bit2 => Left Button, 1 is pressed, 0 is released. - Bit1 => 0 - Bit0 => 1 -Byte 2: X coordinate (xpos[9:2]) -Byte 3: Y coordinate (ypos[9:2]) -Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) - Bit3~Bit2 => X coordinate (ypos[1:0]) - Bit5~Bit4 => y1_g - Bit7~Bit6 => x1_g - -Packet 2 (ABSOLUTE POSITION) - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |0|1|V|A|1|R|1|0| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |x|x|y|y|X|X|Y|Y| - |---------------| |---------------| |---------------| |---------------| - -Byte 1: Bit7~Bit6 => 00, Normal data packet - => 01, Absolute coordinates packet - => 10, Notify packet - => 11, Normal data packet with on-pad click - Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. - When both fingers are up, the last two reports have zero valid - bit. - Bit4 => arc - Bit3 => 1 - Bit2 => Right Button, 1 is pressed, 0 is released. - Bit1 => 1 - Bit0 => 0 -Byte 2: X coordinate (xpos[9:2]) -Byte 3: Y coordinate (ypos[9:2]) -Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) - Bit3~Bit2 => X coordinate (ypos[1:0]) - Bit5~Bit4 => y2_g - Bit7~Bit6 => x2_g - -Notify Packet for STL3888-Ax - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |1|0|1|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|d|u|0|0|0|0| - |---------------| |---------------| |---------------| |---------------| - -Byte 1: Bit7~Bit6 => 00, Normal data packet - => 01, Absolute coordinates packet - => 10, Notify packet - => 11, Normal data packet with on-pad click - Bit5 => 1 - Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1): - 0: left button is generated by the on-pad command - 1: left button is generated by the external button - Bit3 => 1 - Bit2 => Middle Button, 1 is pressed, 0 is not pressed. - Bit1 => Right Button, 1 is pressed, 0 is not pressed. - Bit0 => Left Button, 1 is pressed, 0 is not pressed. -Byte 2: Message Type => 0xB7 (Multi Finger, Multi Coordinate mode) -Byte 3: Bit7~Bit6 => Don't care - Bit5~Bit4 => Number of fingers - Bit3~Bit1 => Reserved - Bit0 => 1: enter gesture mode; 0: leaving gesture mode -Byte 4: Bit7 => scroll right button - Bit6 => scroll left button - Bit5 => scroll down button - Bit4 => scroll up button - * Note that if gesture and additional button (Bit4~Bit7) - happen at the same time, the button information will not - be sent. - Bit3~Bit0 => Reserved - -Sample sequence of Multi-finger, Multi-coordinate mode: - - notify packet (valid bit == 1), abs pkt 1, abs pkt 2, abs pkt 1, - abs pkt 2, ..., notify packet (valid bit == 0) - -============================================================================== -* Absolute position for STL3888-B0. -============================================================================== -Packet 1(ABSOLUTE POSITION) - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |0|1|V|F|1|0|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|u|d|X|X|Y|Y| - |---------------| |---------------| |---------------| |---------------| - -Byte 1: Bit7~Bit6 => 00, Normal data packet - => 01, Absolute coordinates packet - => 10, Notify packet - => 11, Normal data packet with on-pad click - Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. - When both fingers are up, the last two reports have zero valid - bit. - Bit4 => finger up/down information. 1: finger down, 0: finger up. - Bit3 => 1 - Bit2 => finger index, 0 is the first finger, 1 is the second finger. - Bit1 => Right Button, 1 is pressed, 0 is not pressed. - Bit0 => Left Button, 1 is pressed, 0 is not pressed. -Byte 2: X coordinate (xpos[9:2]) -Byte 3: Y coordinate (ypos[9:2]) -Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) - Bit3~Bit2 => X coordinate (ypos[1:0]) - Bit4 => scroll down button - Bit5 => scroll up button - Bit6 => scroll left button - Bit7 => scroll right button - -Packet 2 (ABSOLUTE POSITION) - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |0|1|V|F|1|1|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|u|d|X|X|Y|Y| - |---------------| |---------------| |---------------| |---------------| - -Byte 1: Bit7~Bit6 => 00, Normal data packet - => 01, Absolute coordination packet - => 10, Notify packet - => 11, Normal data packet with on-pad click - Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. - When both fingers are up, the last two reports have zero valid - bit. - Bit4 => finger up/down information. 1: finger down, 0: finger up. - Bit3 => 1 - Bit2 => finger index, 0 is the first finger, 1 is the second finger. - Bit1 => Right Button, 1 is pressed, 0 is not pressed. - Bit0 => Left Button, 1 is pressed, 0 is not pressed. -Byte 2: X coordinate (xpos[9:2]) -Byte 3: Y coordinate (ypos[9:2]) -Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) - Bit3~Bit2 => X coordinate (ypos[1:0]) - Bit4 => scroll down button - Bit5 => scroll up button - Bit6 => scroll left button - Bit7 => scroll right button - -Notify Packet for STL3888-B0 - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |1|0|1|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|u|d|0|0|0|0| - |---------------| |---------------| |---------------| |---------------| - -Byte 1: Bit7~Bit6 => 00, Normal data packet - => 01, Absolute coordination packet - => 10, Notify packet - => 11, Normal data packet with on-pad click - Bit5 => 1 - Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1): - 0: left button is generated by the on-pad command - 1: left button is generated by the external button - Bit3 => 1 - Bit2 => Middle Button, 1 is pressed, 0 is not pressed. - Bit1 => Right Button, 1 is pressed, 0 is not pressed. - Bit0 => Left Button, 1 is pressed, 0 is not pressed. -Byte 2: Message Type => 0xB7 (Multi Finger, Multi Coordinate mode) -Byte 3: Bit7~Bit6 => Don't care - Bit5~Bit4 => Number of fingers - Bit3~Bit1 => Reserved - Bit0 => 1: enter gesture mode; 0: leaving gesture mode -Byte 4: Bit7 => scroll right button - Bit6 => scroll left button - Bit5 => scroll up button - Bit4 => scroll down button - * Note that if gesture and additional button(Bit4~Bit7) - happen at the same time, the button information will not - be sent. - Bit3~Bit0 => Reserved - -Sample sequence of Multi-finger, Multi-coordinate mode: - - notify packet (valid bit == 1), abs pkt 1, abs pkt 2, abs pkt 1, - abs pkt 2, ..., notify packet (valid bit == 0) - -============================================================================== -* Absolute position for STL3888-Cx and STL3888-Dx. -============================================================================== -Single Finger, Absolute Coordinate Mode (SFAC) - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |0|1|0|P|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|B|F|X|X|Y|Y| - |---------------| |---------------| |---------------| |---------------| - -Byte 1: Bit7~Bit6 => 00, Normal data packet - => 01, Absolute coordinates packet - => 10, Notify packet - Bit5 => Coordinate mode(always 0 in SFAC mode): - 0: single-finger absolute coordinates (SFAC) mode - 1: multi-finger, multiple coordinates (MFMC) mode - Bit4 => 0: The LEFT button is generated by on-pad command (OPC) - 1: The LEFT button is generated by external button - Default is 1 even if the LEFT button is not pressed. - Bit3 => Always 1, as specified by PS/2 protocol. - Bit2 => Middle Button, 1 is pressed, 0 is not pressed. - Bit1 => Right Button, 1 is pressed, 0 is not pressed. - Bit0 => Left Button, 1 is pressed, 0 is not pressed. -Byte 2: X coordinate (xpos[9:2]) -Byte 3: Y coordinate (ypos[9:2]) -Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) - Bit3~Bit2 => X coordinate (ypos[1:0]) - Bit4 => 4th mouse button(forward one page) - Bit5 => 5th mouse button(backward one page) - Bit6 => scroll left button - Bit7 => scroll right button - -Multi Finger, Multiple Coordinates Mode (MFMC): - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |0|1|1|P|1|F|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|B|F|X|X|Y|Y| - |---------------| |---------------| |---------------| |---------------| - -Byte 1: Bit7~Bit6 => 00, Normal data packet - => 01, Absolute coordination packet - => 10, Notify packet - Bit5 => Coordinate mode (always 1 in MFMC mode): - 0: single-finger absolute coordinates (SFAC) mode - 1: multi-finger, multiple coordinates (MFMC) mode - Bit4 => 0: The LEFT button is generated by on-pad command (OPC) - 1: The LEFT button is generated by external button - Default is 1 even if the LEFT button is not pressed. - Bit3 => Always 1, as specified by PS/2 protocol. - Bit2 => Finger index, 0 is the first finger, 1 is the second finger. - If bit 1 and 0 are all 1 and bit 4 is 0, the middle external - button is pressed. - Bit1 => Right Button, 1 is pressed, 0 is not pressed. - Bit0 => Left Button, 1 is pressed, 0 is not pressed. -Byte 2: X coordinate (xpos[9:2]) -Byte 3: Y coordinate (ypos[9:2]) -Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) - Bit3~Bit2 => X coordinate (ypos[1:0]) - Bit4 => 4th mouse button(forward one page) - Bit5 => 5th mouse button(backward one page) - Bit6 => scroll left button - Bit7 => scroll right button - - When one of the two fingers is up, the device will output four consecutive -MFMC#0 report packets with zero X and Y to represent 1st finger is up or -four consecutive MFMC#1 report packets with zero X and Y to represent that -the 2nd finger is up. On the other hand, if both fingers are up, the device -will output four consecutive single-finger, absolute coordinate(SFAC) packets -with zero X and Y. - -Notify Packet for STL3888-Cx/Dx - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |1|0|0|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|u|d|0|0|0|0| - |---------------| |---------------| |---------------| |---------------| - -Byte 1: Bit7~Bit6 => 00, Normal data packet - => 01, Absolute coordinates packet - => 10, Notify packet - Bit5 => Always 0 - Bit4 => 0: The LEFT button is generated by on-pad command(OPC) - 1: The LEFT button is generated by external button - Default is 1 even if the LEFT button is not pressed. - Bit3 => 1 - Bit2 => Middle Button, 1 is pressed, 0 is not pressed. - Bit1 => Right Button, 1 is pressed, 0 is not pressed. - Bit0 => Left Button, 1 is pressed, 0 is not pressed. -Byte 2: Message type: - 0xba => gesture information - 0xc0 => one finger hold-rotating gesture -Byte 3: The first parameter for the received message: - 0xba => gesture ID (refer to the 'Gesture ID' section) - 0xc0 => region ID -Byte 4: The second parameter for the received message: - 0xba => N/A - 0xc0 => finger up/down information - -Sample sequence of Multi-finger, Multi-coordinates mode: - - notify packet (valid bit == 1), MFMC packet 1 (byte 1, bit 2 == 0), - MFMC packet 2 (byte 1, bit 2 == 1), MFMC packet 1, MFMC packet 2, - ..., notify packet (valid bit == 0) - - That is, when the device is in MFMC mode, the host will receive - interleaved absolute coordinate packets for each finger. - -============================================================================== -* FSP Enable/Disable packet -============================================================================== - Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 -BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| - 1 |Y|X|0|0|1|M|R|L| 2 |0|1|0|1|1|0|1|E| 3 | | | | | | | | | 4 | | | | | | | | | - |---------------| |---------------| |---------------| |---------------| - -FSP will send out enable/disable packet when FSP receive PS/2 enable/disable -command. Host will receive the packet which Middle, Right, Left button will -be set. The packet only use byte 0 and byte 1 as a pattern of original packet. -Ignore the other bytes of the packet. - -Byte 1: Bit7 => 0, Y overflow - Bit6 => 0, X overflow - Bit5 => 0, Y sign bit - Bit4 => 0, X sign bit - Bit3 => 1 - Bit2 => 1, Middle Button - Bit1 => 1, Right Button - Bit0 => 1, Left Button -Byte 2: Bit7~1 => (0101101b) - Bit0 => 1 = Enable - 0 = Disable -Byte 3: Don't care -Byte 4: Don't care (MOUSE ID 3, 4) -Byte 5~8: Don't care (Absolute packet) - -============================================================================== -* PS/2 Command Set -============================================================================== - -FSP supports basic PS/2 commanding set and modes, refer to following URL for -details about PS/2 commands: - -http://www.computer-engineering.org/ps2mouse/ - -============================================================================== -* Programming Sequence for Determining Packet Parsing Flow -============================================================================== -1. Identify FSP by reading device ID(0x00) and version(0x01) register - -2a. For FSP version < STL3888 Cx, determine number of buttons by reading - the 'test mode status' (0x20) register: - - buttons = reg[0x20] & 0x30 - - if buttons == 0x30 or buttons == 0x20: - # two/four buttons - Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse' - section A for packet parsing detail(ignore byte 4, bit ~ 7) - elif buttons == 0x10: - # 6 buttons - Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse' - section B for packet parsing detail - elif buttons == 0x00: - # 6 buttons - Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse' - section A for packet parsing detail - -2b. For FSP version >= STL3888 Cx: - Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse' - section A for packet parsing detail (ignore byte 4, bit ~ 7) - -============================================================================== -* Programming Sequence for Register Reading/Writing -============================================================================== - -Register inversion requirement: - - Following values needed to be inverted(the '~' operator in C) before being -sent to FSP: - - 0xe8, 0xe9, 0xee, 0xf2, 0xf3 and 0xff. - -Register swapping requirement: - - Following values needed to have their higher 4 bits and lower 4 bits being -swapped before being sent to FSP: - - 10, 20, 40, 60, 80, 100 and 200. - -Register reading sequence: - - 1. send 0xf3 PS/2 command to FSP; - - 2. send 0x66 PS/2 command to FSP; - - 3. send 0x88 PS/2 command to FSP; - - 4. send 0xf3 PS/2 command to FSP; - - 5. if the register address being to read is not required to be - inverted(refer to the 'Register inversion requirement' section), - goto step 6 - - 5a. send 0x68 PS/2 command to FSP; - - 5b. send the inverted register address to FSP and goto step 8; - - 6. if the register address being to read is not required to be - swapped(refer to the 'Register swapping requirement' section), - goto step 7 - - 6a. send 0xcc PS/2 command to FSP; - - 6b. send the swapped register address to FSP and goto step 8; - - 7. send 0x66 PS/2 command to FSP; - - 7a. send the original register address to FSP and goto step 8; - - 8. send 0xe9(status request) PS/2 command to FSP; - - 9. the 4th byte of the response read from FSP should be the - requested register value(?? indicates don't care byte): - - host: 0xe9 - 3888: 0xfa (??) (??) (val) - - * Note that since the Cx release, the hardware will return 1's - complement of the register value at the 3rd byte of status request - result: - - host: 0xe9 - 3888: 0xfa (??) (~val) (val) - -Register writing sequence: - - 1. send 0xf3 PS/2 command to FSP; - - 2. if the register address being to write is not required to be - inverted(refer to the 'Register inversion requirement' section), - goto step 3 - - 2a. send 0x74 PS/2 command to FSP; - - 2b. send the inverted register address to FSP and goto step 5; - - 3. if the register address being to write is not required to be - swapped(refer to the 'Register swapping requirement' section), - goto step 4 - - 3a. send 0x77 PS/2 command to FSP; - - 3b. send the swapped register address to FSP and goto step 5; - - 4. send 0x55 PS/2 command to FSP; - - 4a. send the register address to FSP and goto step 5; - - 5. send 0xf3 PS/2 command to FSP; - - 6. if the register value being to write is not required to be - inverted(refer to the 'Register inversion requirement' section), - goto step 7 - - 6a. send 0x47 PS/2 command to FSP; - - 6b. send the inverted register value to FSP and goto step 9; - - 7. if the register value being to write is not required to be - swapped(refer to the 'Register swapping requirement' section), - goto step 8 - - 7a. send 0x44 PS/2 command to FSP; - - 7b. send the swapped register value to FSP and goto step 9; - - 8. send 0x33 PS/2 command to FSP; - - 8a. send the register value to FSP; - - 9. the register writing sequence is completed. - - * Note that since the Cx release, the hardware will return 1's - complement of the register value at the 3rd byte of status request - result. Host can optionally send another 0xe9 (status request) PS/2 - command to FSP at the end of register writing to verify that the - register writing operation is successful (?? indicates don't care - byte): - - host: 0xe9 - 3888: 0xfa (??) (~val) (val) - -============================================================================== -* Programming Sequence for Page Register Reading/Writing -============================================================================== - - In order to overcome the limitation of maximum number of registers -supported, the hardware separates register into different groups called -'pages.' Each page is able to include up to 255 registers. - - The default page after power up is 0x82; therefore, if one has to get -access to register 0x8301, one has to use following sequence to switch -to page 0x83, then start reading/writing from/to offset 0x01 by using -the register read/write sequence described in previous section. - -Page register reading sequence: - - 1. send 0xf3 PS/2 command to FSP; - - 2. send 0x66 PS/2 command to FSP; - - 3. send 0x88 PS/2 command to FSP; - - 4. send 0xf3 PS/2 command to FSP; - - 5. send 0x83 PS/2 command to FSP; - - 6. send 0x88 PS/2 command to FSP; - - 7. send 0xe9(status request) PS/2 command to FSP; - - 8. the response read from FSP should be the requested page value. - -Page register writing sequence: - - 1. send 0xf3 PS/2 command to FSP; - - 2. send 0x38 PS/2 command to FSP; - - 3. send 0x88 PS/2 command to FSP; - - 4. send 0xf3 PS/2 command to FSP; - - 5. if the page address being written is not required to be - inverted(refer to the 'Register inversion requirement' section), - goto step 6 - - 5a. send 0x47 PS/2 command to FSP; - - 5b. send the inverted page address to FSP and goto step 9; - - 6. if the page address being written is not required to be - swapped(refer to the 'Register swapping requirement' section), - goto step 7 - - 6a. send 0x44 PS/2 command to FSP; - - 6b. send the swapped page address to FSP and goto step 9; - - 7. send 0x33 PS/2 command to FSP; - - 8. send the page address to FSP; - - 9. the page register writing sequence is completed. - -============================================================================== -* Gesture ID -============================================================================== - - Unlike other devices which sends multiple fingers' coordinates to host, -FSP processes multiple fingers' coordinates internally and convert them -into a 8 bits integer, namely 'Gesture ID.' Following is a list of -supported gesture IDs: - - ID Description - 0x86 2 finger straight up - 0x82 2 finger straight down - 0x80 2 finger straight right - 0x84 2 finger straight left - 0x8f 2 finger zoom in - 0x8b 2 finger zoom out - 0xc0 2 finger curve, counter clockwise - 0xc4 2 finger curve, clockwise - 0x2e 3 finger straight up - 0x2a 3 finger straight down - 0x28 3 finger straight right - 0x2c 3 finger straight left - 0x38 palm - -============================================================================== -* Register Listing -============================================================================== - - Registers are represented in 16 bits values. The higher 8 bits represent -the page address and the lower 8 bits represent the relative offset within -that particular page. Refer to the 'Programming Sequence for Page Register -Reading/Writing' section for instructions on how to change current page -address. - -offset width default r/w name -0x8200 bit7~bit0 0x01 RO device ID - -0x8201 bit7~bit0 RW version ID - 0xc1: STL3888 Ax - 0xd0 ~ 0xd2: STL3888 Bx - 0xe0 ~ 0xe1: STL3888 Cx - 0xe2 ~ 0xe3: STL3888 Dx - -0x8202 bit7~bit0 0x01 RO vendor ID - -0x8203 bit7~bit0 0x01 RO product ID - -0x8204 bit3~bit0 0x01 RW revision ID - -0x820b test mode status 1 - bit3 1 RO 0: rotate 180 degree - 1: no rotation - *only supported by H/W prior to Cx - -0x820f register file page control - bit2 0 RW 1: rotate 180 degree - 0: no rotation - *supported since Cx - - bit0 0 RW 1 to enable page 1 register files - *only supported by H/W prior to Cx - -0x8210 RW system control 1 - bit0 1 RW Reserved, must be 1 - bit1 0 RW Reserved, must be 0 - bit4 0 RW Reserved, must be 0 - bit5 1 RW register clock gating enable - 0: read only, 1: read/write enable - (Note that following registers does not require clock gating being - enabled prior to write: 05 06 07 08 09 0c 0f 10 11 12 16 17 18 23 2e - 40 41 42 43. In addition to that, this bit must be 1 when gesture - mode is enabled) - -0x8220 test mode status - bit5~bit4 RO number of buttons - 11 => 2, lbtn/rbtn - 10 => 4, lbtn/rbtn/scru/scrd - 01 => 6, lbtn/rbtn/scru/scrd/scrl/scrr - 00 => 6, lbtn/rbtn/scru/scrd/fbtn/bbtn - *only supported by H/W prior to Cx - -0x8231 RW on-pad command detection - bit7 0 RW on-pad command left button down tag - enable - 0: disable, 1: enable - *only supported by H/W prior to Cx - -0x8234 RW on-pad command control 5 - bit4~bit0 0x05 RW XLO in 0s/4/1, so 03h = 0010.1b = 2.5 - (Note that position unit is in 0.5 scanline) - *only supported by H/W prior to Cx - - bit7 0 RW on-pad tap zone enable - 0: disable, 1: enable - *only supported by H/W prior to Cx - -0x8235 RW on-pad command control 6 - bit4~bit0 0x1d RW XHI in 0s/4/1, so 19h = 1100.1b = 12.5 - (Note that position unit is in 0.5 scanline) - *only supported by H/W prior to Cx - -0x8236 RW on-pad command control 7 - bit4~bit0 0x04 RW YLO in 0s/4/1, so 03h = 0010.1b = 2.5 - (Note that position unit is in 0.5 scanline) - *only supported by H/W prior to Cx - -0x8237 RW on-pad command control 8 - bit4~bit0 0x13 RW YHI in 0s/4/1, so 11h = 1000.1b = 8.5 - (Note that position unit is in 0.5 scanline) - *only supported by H/W prior to Cx - -0x8240 RW system control 5 - bit1 0 RW FSP Intellimouse mode enable - 0: disable, 1: enable - *only supported by H/W prior to Cx - - bit2 0 RW movement + abs. coordinate mode enable - 0: disable, 1: enable - (Note that this function has the functionality of bit 1 even when - bit 1 is not set. However, the format is different from that of bit 1. - In addition, when bit 1 and bit 2 are set at the same time, bit 2 will - override bit 1.) - *only supported by H/W prior to Cx - - bit3 0 RW abs. coordinate only mode enable - 0: disable, 1: enable - (Note that this function has the functionality of bit 1 even when - bit 1 is not set. However, the format is different from that of bit 1. - In addition, when bit 1, bit 2 and bit 3 are set at the same time, - bit 3 will override bit 1 and 2.) - *only supported by H/W prior to Cx - - bit5 0 RW auto switch enable - 0: disable, 1: enable - *only supported by H/W prior to Cx - - bit6 0 RW G0 abs. + notify packet format enable - 0: disable, 1: enable - (Note that the absolute/relative coordinate output still depends on - bit 2 and 3. That is, if any of those bit is 1, host will receive - absolute coordinates; otherwise, host only receives packets with - relative coordinate.) - *only supported by H/W prior to Cx - - bit7 0 RW EN_PS2_F2: PS/2 gesture mode 2nd - finger packet enable - 0: disable, 1: enable - *only supported by H/W prior to Cx - -0x8243 RW on-pad control - bit0 0 RW on-pad control enable - 0: disable, 1: enable - (Note that if this bit is cleared, bit 3/5 will be ineffective) - *only supported by H/W prior to Cx - - bit3 0 RW on-pad fix vertical scrolling enable - 0: disable, 1: enable - *only supported by H/W prior to Cx - - bit5 0 RW on-pad fix horizontal scrolling enable - 0: disable, 1: enable - *only supported by H/W prior to Cx - -0x8290 RW software control register 1 - bit0 0 RW absolute coordination mode - 0: disable, 1: enable - *supported since Cx - - bit1 0 RW gesture ID output - 0: disable, 1: enable - *supported since Cx - - bit2 0 RW two fingers' coordinates output - 0: disable, 1: enable - *supported since Cx - - bit3 0 RW finger up one packet output - 0: disable, 1: enable - *supported since Cx - - bit4 0 RW absolute coordination continuous mode - 0: disable, 1: enable - *supported since Cx - - bit6~bit5 00 RW gesture group selection - 00: basic - 01: suite - 10: suite pro - 11: advanced - *supported since Cx - - bit7 0 RW Bx packet output compatible mode - 0: disable, 1: enable *supported since Cx - *supported since Cx - - -0x833d RW on-pad command control 1 - bit7 1 RW on-pad command detection enable - 0: disable, 1: enable - *supported since Cx - -0x833e RW on-pad command detection - bit7 0 RW on-pad command left button down tag - enable. Works only in H/W based PS/2 - data packet mode. - 0: disable, 1: enable - *supported since Cx diff --git a/Documentation/input/shape.fig b/Documentation/input/shape.fig deleted file mode 100644 index c22bff83d06f..000000000000 --- a/Documentation/input/shape.fig +++ /dev/null @@ -1,65 +0,0 @@ -#FIG 3.2 -Landscape -Center -Inches -Letter -100.00 -Single --2 -1200 2 -2 1 0 2 0 7 50 0 -1 0.000 0 0 -1 0 0 6 - 4200 3600 4200 3075 4950 2325 7425 2325 8250 3150 8250 3600 -2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2 - 4200 3675 4200 5400 -2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2 - 8250 3675 8250 5400 -2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2 - 3675 3600 8700 3600 -2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2 - 8775 3600 10200 3600 -2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2 - 8325 3150 9075 3150 -2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2 - 7500 2325 10200 2325 -2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2 - 3600 3600 3000 3600 -2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2 - 4125 3075 3000 3075 -2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 1 1 2 - 0 0 1.00 60.00 120.00 - 0 0 1.00 60.00 120.00 - 4200 5400 8175 5400 -2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 1 1 2 - 0 0 1.00 60.00 120.00 - 0 0 1.00 60.00 120.00 - 10125 2325 10125 3600 -2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 1 1 2 - 0 0 1.00 60.00 120.00 - 0 0 1.00 60.00 120.00 - 3000 3150 3000 3600 -2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 1 1 2 - 0 0 1.00 60.00 120.00 - 0 0 1.00 60.00 120.00 - 9075 3150 9075 3600 -2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2 - 4950 2325 4950 1200 -2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 2 - 7425 2325 7425 1200 -2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 4 - 4200 3075 4200 2400 3600 1800 3600 1200 -2 1 1 1 0 7 50 0 -1 4.000 0 0 -1 0 0 4 - 8250 3150 8250 2475 8775 1950 8775 1200 -2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 1 1 2 - 0 0 1.00 60.00 120.00 - 0 0 1.00 60.00 120.00 - 3600 1275 4950 1275 -2 1 0 1 0 7 50 0 -1 4.000 0 0 -1 1 1 2 - 0 0 1.00 60.00 120.00 - 0 0 1.00 60.00 120.00 - 7425 1275 8700 1275 -4 1 0 50 0 0 12 0.0000 4 135 1140 6075 5325 Effect duration\001 -4 0 0 50 0 0 12 0.0000 4 180 1305 10200 3000 Effect magnitude\001 -4 0 0 50 0 0 12 0.0000 4 135 780 9150 3450 Fade level\001 -4 1 0 50 0 0 12 0.0000 4 180 1035 4275 1200 Attack length\001 -4 1 0 50 0 0 12 0.0000 4 180 885 8175 1200 Fade length\001 -4 2 0 50 0 0 12 0.0000 4 135 930 2925 3375 Attack level\001 diff --git a/Documentation/input/shape.svg b/Documentation/input/shape.svg new file mode 100644 index 000000000000..fc0af44db3f7 --- /dev/null +++ b/Documentation/input/shape.svg @@ -0,0 +1,39 @@ +<svg width="7.95in" height="3.70in" version="1.1" viewBox="1956 1041 9354.492 4306.001" xmlns="http://www.w3.org/2000/svg"> + <polyline transform="translate(-121.88 -68.4)" points="4200 3600 4200 3075 4950 2325 7425 2325 8250 3150 8250 3600" fill="none" stroke="#000" stroke-width="15"/> + <polyline transform="translate(-121.88 -68.4)" points="4200 3675 4200 5400" fill="none" stroke="#000" stroke-dasharray="40, 40" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="8250 3675 8250 5400" fill="none" stroke="#000" stroke-dasharray="40, 40" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="3675 3600 8700 3600" fill="none" stroke="#000" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="8775 3600 10200 3600" fill="none" stroke="#000" stroke-dasharray="40, 40" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="8325 3150 9075 3150" fill="none" stroke="#000" stroke-dasharray="40, 40" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="7500 2325 10200 2325" fill="none" stroke="#000" stroke-dasharray="40, 40" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="3600 3600 3e3 3600" fill="none" stroke="#000" stroke-dasharray="40, 40" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="4125 3075 3e3 3075" fill="none" stroke="#000" stroke-dasharray="40, 40" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="4217 5400 8158 5400" fill="none" stroke="#000" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="8053 5430 8173 5400 8053 5370" fill="none" stroke="#000" stroke-miterlimit="8" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="4322 5370 4202 5400 4322 5430" fill="none" stroke="#000" stroke-miterlimit="8" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="10125 2342 10125 3583" fill="none" stroke="#000" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="10095 3478 10125 3598 10155 3478" fill="none" stroke="#000" stroke-miterlimit="8" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="10155 2447 10125 2327 10095 2447" fill="none" stroke="#000" stroke-miterlimit="8" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="3e3 3167 3e3 3583" fill="none" stroke="#000" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="2970 3478 3e3 3598 3030 3478" fill="none" stroke="#000" stroke-miterlimit="8" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="3030 3272 3e3 3152 2970 3272" fill="none" stroke="#000" stroke-miterlimit="8" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="9075 3167 9075 3583" fill="none" stroke="#000" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="9045 3478 9075 3598 9105 3478" fill="none" stroke="#000" stroke-miterlimit="8" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="9105 3272 9075 3152 9045 3272" fill="none" stroke="#000" stroke-miterlimit="8" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="4950 2325 4950 1200" fill="none" stroke="#000" stroke-dasharray="40, 40" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="7425 2325 7425 1200" fill="none" stroke="#000" stroke-dasharray="40, 40" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="4200 3075 4200 2400 3600 1800 3600 1200" fill="none" stroke="#000" stroke-dasharray="40, 40" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="8250 3150 8250 2475 8775 1950 8775 1200" fill="none" stroke="#000" stroke-dasharray="40, 40" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="3617 1275 4933 1275" fill="none" stroke="#000" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="4828 1305 4948 1275 4828 1245" fill="none" stroke="#000" stroke-miterlimit="8" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="3722 1245 3602 1275 3722 1305" fill="none" stroke="#000" stroke-miterlimit="8" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="7442 1275 8683 1275" fill="none" stroke="#000" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="8578 1305 8698 1275 8578 1245" fill="none" stroke="#000" stroke-miterlimit="8" stroke-width="7"/> + <polyline transform="translate(-121.88 -68.4)" points="7547 1245 7427 1275 7547 1305" fill="none" stroke="#000" stroke-miterlimit="8" stroke-width="7"/> + <text x="5953.125" y="5256.6001" fill="#000000" font-family="sans-serif" font-size="144px" stroke-width=".025in" text-anchor="middle" xml:space="preserve">Effect duration</text> + <text x="10078.125" y="2931.5999" fill="#000000" font-family="sans-serif" font-size="144px" stroke-width=".025in" xml:space="preserve">Effect magnitude</text> + <text x="9028.125" y="3381.5999" fill="#000000" font-family="sans-serif" font-size="144px" stroke-width=".025in" xml:space="preserve">Fade level</text> + <text x="4153.125" y="1131.6" fill="#000000" font-family="sans-serif" font-size="144px" stroke-width=".025in" text-anchor="middle" xml:space="preserve">Attack length</text> + <text x="8053.125" y="1131.6" fill="#000000" font-family="sans-serif" font-size="144px" stroke-width=".025in" text-anchor="middle" xml:space="preserve">Fade length</text> + <text x="2803.125" y="3306.5999" fill="#000000" font-family="sans-serif" font-size="144px" stroke-width=".025in" text-anchor="end" xml:space="preserve">Attack level</text> +</svg> diff --git a/Documentation/input/uinput.rst b/Documentation/input/uinput.rst new file mode 100644 index 000000000000..b8e90b6a126c --- /dev/null +++ b/Documentation/input/uinput.rst @@ -0,0 +1,245 @@ +============= +uinput module +============= + +Introduction +============ + +uinput is a kernel module that makes it possible to emulate input devices +from userspace. By writing to /dev/uinput (or /dev/input/uinput) device, a +process can create a virtual input device with specific capabilities. Once +this virtual device is created, the process can send events through it, +that will be delivered to userspace and in-kernel consumers. + +Interface +========= + +:: + + linux/uinput.h + +The uinput header defines ioctls to create, set up, and destroy virtual +devices. + +libevdev +======== + +libevdev is a wrapper library for evdev devices that provides interfaces to +create uinput devices and send events. libevdev is less error-prone than +accessing uinput directly, and should be considered for new software. + +For examples and more information about libevdev: +https://www.freedesktop.org/software/libevdev/doc/latest/ + +Examples +======== + +Keyboard events +--------------- + +This first example shows how to create a new virtual device, and how to +send a key event. All default imports and error handlers were removed for +the sake of simplicity. + +.. code-block:: c + + #include <linux/uinput.h> + + void emit(int fd, int type, int code, int val) + { + struct input_event ie; + + ie.type = type; + ie.code = code; + ie.value = val; + /* timestamp values below are ignored */ + ie.time.tv_sec = 0; + ie.time.tv_usec = 0; + + write(fd, &ie, sizeof(ie)); + } + + int main(void) + { + struct uinput_setup usetup; + + int fd = open("/dev/uinput", O_WRONLY | O_NONBLOCK); + + + /* + * The ioctls below will enable the device that is about to be + * created, to pass key events, in this case the space key. + */ + ioctl(fd, UI_SET_EVBIT, EV_KEY); + ioctl(fd, UI_SET_KEYBIT, KEY_SPACE); + + memset(&usetup, 0, sizeof(usetup)); + usetup.id.bustype = BUS_USB; + usetup.id.vendor = 0x1234; /* sample vendor */ + usetup.id.product = 0x5678; /* sample product */ + strcpy(usetup.name, "Example device"); + + ioctl(fd, UI_DEV_SETUP, &usetup); + ioctl(fd, UI_DEV_CREATE); + + /* + * On UI_DEV_CREATE the kernel will create the device node for this + * device. We are inserting a pause here so that userspace has time + * to detect, initialize the new device, and can start listening to + * the event, otherwise it will not notice the event we are about + * to send. This pause is only needed in our example code! + */ + sleep(1); + + /* Key press, report the event, send key release, and report again */ + emit(fd, EV_KEY, KEY_SPACE, 1); + emit(fd, EV_SYN, SYN_REPORT, 0); + emit(fd, EV_KEY, KEY_SPACE, 0); + emit(fd, EV_SYN, SYN_REPORT, 0); + + /* + * Give userspace some time to read the events before we destroy the + * device with UI_DEV_DESTOY. + */ + sleep(1); + + ioctl(fd, UI_DEV_DESTROY); + close(fd); + + return 0; + } + +Mouse movements +--------------- + +This example shows how to create a virtual device that behaves like a physical +mouse. + +.. code-block:: c + + #include <linux/uinput.h> + + /* emit function is identical to of the first example */ + + int main(void) + { + struct uinput_setup usetup; + int i = 50; + + int fd = open("/dev/uinput", O_WRONLY | O_NONBLOCK); + + /* enable mouse button left and relative events */ + ioctl(fd, UI_SET_EVBIT, EV_KEY); + ioctl(fd, UI_SET_KEYBIT, BTN_LEFT); + + ioctl(fd, UI_SET_EVBIT, EV_REL); + ioctl(fd, UI_SET_RELBIT, REL_X); + ioctl(fd, UI_SET_RELBIT, REL_Y); + + memset(&usetup, 0, sizeof(usetup)); + usetup.id.bustype = BUS_USB; + usetup.id.vendor = 0x1234; /* sample vendor */ + usetup.id.product = 0x5678; /* sample product */ + strcpy(usetup.name, "Example device"); + + ioctl(fd, UI_DEV_SETUP, &usetup); + ioctl(fd, UI_DEV_CREATE); + + /* + * On UI_DEV_CREATE the kernel will create the device node for this + * device. We are inserting a pause here so that userspace has time + * to detect, initialize the new device, and can start listening to + * the event, otherwise it will not notice the event we are about + * to send. This pause is only needed in our example code! + */ + sleep(1); + + /* Move the mouse diagonally, 5 units per axis */ + while (i--) { + emit(fd, EV_REL, REL_X, 5); + emit(fd, EV_REL, REL_Y, 5); + emit(fd, EV_SYN, SYN_REPORT, 0); + usleep(15000); + } + + /* + * Give userspace some time to read the events before we destroy the + * device with UI_DEV_DESTOY. + */ + sleep(1); + + ioctl(fd, UI_DEV_DESTROY); + close(fd); + + return 0; + } + + +uinput old interface +-------------------- + +Before uinput version 5, there wasn't a dedicated ioctl to set up a virtual +device. Programs supportinf older versions of uinput interface need to fill +a uinput_user_dev structure and write it to the uinput file descriptor to +configure the new uinput device. New code should not use the old interface +but interact with uinput via ioctl calls, or use libevdev. + +.. code-block:: c + + #include <linux/uinput.h> + + /* emit function is identical to of the first example */ + + int main(void) + { + struct uinput_user_dev uud; + int version, rc, fd; + + fd = open("/dev/uinput", O_WRONLY | O_NONBLOCK); + rc = ioctl(fd, UI_GET_VERSION, &version); + + if (rc == 0 && version >= 5) { + /* use UI_DEV_SETUP */ + return 0; + } + + /* + * The ioctls below will enable the device that is about to be + * created, to pass key events, in this case the space key. + */ + ioctl(fd, UI_SET_EVBIT, EV_KEY); + ioctl(fd, UI_SET_KEYBIT, KEY_SPACE); + + memset(&uud, 0, sizeof(uud)); + snprintf(uud.name, UINPUT_MAX_NAME_SIZE, "uinput old interface"); + write(fd, &uud, sizeof(uud)); + + ioctl(fd, UI_DEV_CREATE); + + /* + * On UI_DEV_CREATE the kernel will create the device node for this + * device. We are inserting a pause here so that userspace has time + * to detect, initialize the new device, and can start listening to + * the event, otherwise it will not notice the event we are about + * to send. This pause is only needed in our example code! + */ + sleep(1); + + /* Key press, report the event, send key release, and report again */ + emit(fd, EV_KEY, KEY_SPACE, 1); + emit(fd, EV_SYN, SYN_REPORT, 0); + emit(fd, EV_KEY, KEY_SPACE, 0); + emit(fd, EV_SYN, SYN_REPORT, 0); + + /* + * Give userspace some time to read the events before we destroy the + * device with UI_DEV_DESTOY. + */ + sleep(1); + + ioctl(fd, UI_DEV_DESTROY); + + close(fd); + return 0; + } + diff --git a/Documentation/input/userio.txt b/Documentation/input/userio.rst index 0880c0f447a6..f780c77931fe 100644 --- a/Documentation/input/userio.txt +++ b/Documentation/input/userio.rst @@ -1,37 +1,47 @@ - The userio Protocol - (c) 2015 Stephen Chandler Paul <thatslyude@gmail.com> - Sponsored by Red Hat --------------------------------------------------------------------------------- - -1. Introduction -~~~~~~~~~~~~~~~ - This module is intended to try to make the lives of input driver developers +.. include:: <isonum.txt> + +=================== +The userio Protocol +=================== + + +:Copyright: |copy| 2015 Stephen Chandler Paul <thatslyude@gmail.com> + +Sponsored by Red Hat + + +Introduction +============= + +This module is intended to try to make the lives of input driver developers easier by allowing them to test various serio devices (mainly the various touchpads found on laptops) without having to have the physical device in front of them. userio accomplishes this by allowing any privileged userspace program to directly interact with the kernel's serio driver and control a virtual serio port from there. -2. Usage overview -~~~~~~~~~~~~~~~~~ - In order to interact with the userio kernel module, one simply opens the +Usage overview +============== + +In order to interact with the userio kernel module, one simply opens the /dev/userio character device in their applications. Commands are sent to the kernel module by writing to the device, and any data received from the serio driver is read as-is from the /dev/userio device. All of the structures and macros you need to interact with the device are defined in <linux/userio.h> and <linux/serio.h>. -3. Command Structure -~~~~~~~~~~~~~~~~~~~~ - The struct used for sending commands to /dev/userio is as follows: +Command Structure +================= + +The struct used for sending commands to /dev/userio is as follows:: struct userio_cmd { __u8 type; __u8 data; }; - "type" describes the type of command that is being sent. This can be any one -of the USERIO_CMD macros defined in <linux/userio.h>. "data" is the argument +``type`` describes the type of command that is being sent. This can be any one +of the USERIO_CMD macros defined in <linux/userio.h>. ``data`` is the argument that goes along with the command. In the event that the command doesn't have an argument, this field can be left untouched and will be ignored by the kernel. Each command should be sent by writing the struct directly to the character @@ -39,31 +49,36 @@ device. In the event that the command you send is invalid, an error will be returned by the character device and a more descriptive error will be printed to the kernel log. Only one command can be sent at a time, any additional data written to the character device after the initial command will be ignored. - To close the virtual serio port, just close /dev/userio. -4. Commands -~~~~~~~~~~~ +To close the virtual serio port, just close /dev/userio. + +Commands +======== + +USERIO_CMD_REGISTER +~~~~~~~~~~~~~~~~~~~ -4.1 USERIO_CMD_REGISTER -~~~~~~~~~~~~~~~~~~~~~~~ - Registers the port with the serio driver and begins transmitting data back and +Registers the port with the serio driver and begins transmitting data back and forth. Registration can only be performed once a port type is set with USERIO_CMD_SET_PORT_TYPE. Has no argument. -4.2 USERIO_CMD_SET_PORT_TYPE -~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - Sets the type of port we're emulating, where "data" is the port type being +USERIO_CMD_SET_PORT_TYPE +~~~~~~~~~~~~~~~~~~~~~~~~ + +Sets the type of port we're emulating, where ``data`` is the port type being set. Can be any of the macros from <linux/serio.h>. For example: SERIO_8042 would set the port type to be a normal PS/2 port. -4.3 USERIO_CMD_SEND_INTERRUPT -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - Sends an interrupt through the virtual serio port to the serio driver, where -"data" is the interrupt data being sent. +USERIO_CMD_SEND_INTERRUPT +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Sends an interrupt through the virtual serio port to the serio driver, where +``data`` is the interrupt data being sent. + +Userspace tools +=============== -5. Userspace tools -~~~~~~~~~~~~~~~~~~ - The userio userspace tools are able to record PS/2 devices using some of the +The userio userspace tools are able to record PS/2 devices using some of the debugging information from i8042, and play back the devices on /dev/userio. The latest version of these tools can be found at: diff --git a/MAINTAINERS b/MAINTAINERS index c732ba701ae7..fe73af757247 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6551,7 +6551,7 @@ INPUT MULTITOUCH (MT) PROTOCOL M: Henrik Rydberg <rydberg@bitmath.org> L: linux-input@vger.kernel.org S: Odd fixes -F: Documentation/input/multi-touch-protocol.txt +F: Documentation/input/multi-touch-protocol.rst F: drivers/input/input-mt.c K: \b(ABS|SYN)_MT_ @@ -13963,7 +13963,7 @@ YEALINK PHONE DRIVER M: Henk Vergonet <Henk.Vergonet@gmail.com> L: usbb2k-api-dev@nongnu.org S: Maintained -F: Documentation/input/yealink.txt +F: Documentation/input/yealink.rst F: drivers/input/misc/yealink.* Z8530 DRIVER FOR AX.25 diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index e216433b56ed..e2c97728b3c6 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -26,7 +26,6 @@ #include <linux/smsc911x.h> #include <linux/input.h> #include <linux/gpio_keys.h> -#include <linux/input/eeti_ts.h> #include <linux/leds.h> #include <linux/w1-gpio.h> #include <linux/sched.h> @@ -965,15 +964,28 @@ static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = { .addr = 0x48, }; -static struct eeti_ts_platform_data eeti_ts_pdata = { - .irq_active_high = 1, - .irq_gpio = GPIO_TOUCH_IRQ, +static struct gpiod_lookup_table raumfeld_controller_gpios_table = { + .dev_id = "0-000a", + .table = { + GPIO_LOOKUP("gpio-pxa", + GPIO_TOUCH_IRQ, "attn", GPIO_ACTIVE_HIGH), + { }, + }, +}; + +static const struct resource raumfeld_controller_resources[] __initconst = { + { + .start = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ), + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH, + }, }; static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = { .type = "eeti_ts", .addr = 0x0a, - .platform_data = &eeti_ts_pdata, + .resources = raumfeld_controller_resources, + .num_resources = ARRAY_SIZE(raumfeld_controller_resources), }; static struct platform_device *raumfeld_common_devices[] = { @@ -1064,6 +1076,8 @@ static void __init __maybe_unused raumfeld_controller_init(void) platform_device_register(&rotary_encoder_device); spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices)); + + gpiod_add_lookup_table(&raumfeld_controller_gpios_table); i2c_register_board_info(0, &raumfeld_controller_i2c_board_info, 1); ret = gpio_request(GPIO_SHUTDOWN_BATT, "battery shutdown"); diff --git a/drivers/i2c/i2c-boardinfo.c b/drivers/i2c/i2c-boardinfo.c index 6e5fac6a5262..31186ead5a40 100644 --- a/drivers/i2c/i2c-boardinfo.c +++ b/drivers/i2c/i2c-boardinfo.c @@ -15,6 +15,7 @@ #include <linux/export.h> #include <linux/i2c.h> #include <linux/kernel.h> +#include <linux/property.h> #include <linux/rwsem.h> #include <linux/slab.h> @@ -55,6 +56,7 @@ EXPORT_SYMBOL_GPL(__i2c_first_dynamic_bus_num); * * The board info passed can safely be __initdata, but be careful of embedded * pointers (for platform_data, functions, etc) since that won't be copied. + * Device properties are deep-copied though. */ int i2c_register_board_info(int busnum, struct i2c_board_info const *info, unsigned len) { @@ -78,6 +80,28 @@ int i2c_register_board_info(int busnum, struct i2c_board_info const *info, unsig devinfo->busnum = busnum; devinfo->board_info = *info; + + if (info->properties) { + devinfo->board_info.properties = + property_entries_dup(info->properties); + if (IS_ERR(devinfo->board_info.properties)) { + status = PTR_ERR(devinfo->board_info.properties); + break; + } + } + + if (info->resources) { + devinfo->board_info.resources = + kmemdup(info->resources, + info->num_resources * + sizeof(*info->resources), + GFP_KERNEL); + if (!devinfo->board_info.resources) { + status = -ENOMEM; + break; + } + } + list_add_tail(&devinfo->list, &__i2c_board_list); } diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 7a065c4260f3..82576aaccc90 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -74,7 +74,6 @@ static DEFINE_MUTEX(core_lock); static DEFINE_IDR(i2c_adapter_idr); -static struct device_type i2c_client_type; static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver); static struct static_key i2c_trace_msg = STATIC_KEY_INIT_FALSE; @@ -1153,11 +1152,12 @@ struct bus_type i2c_bus_type = { }; EXPORT_SYMBOL_GPL(i2c_bus_type); -static struct device_type i2c_client_type = { +struct device_type i2c_client_type = { .groups = i2c_dev_groups, .uevent = i2c_device_uevent, .release = i2c_client_dev_release, }; +EXPORT_SYMBOL_GPL(i2c_client_type); /** @@ -1334,6 +1334,32 @@ static void i2c_dev_set_name(struct i2c_adapter *adap, i2c_encode_flags_to_addr(client)); } +static int i2c_dev_irq_from_resources(const struct resource *resources, + unsigned int num_resources) +{ + struct irq_data *irqd; + int i; + + for (i = 0; i < num_resources; i++) { + const struct resource *r = &resources[i]; + + if (resource_type(r) != IORESOURCE_IRQ) + continue; + + if (r->flags & IORESOURCE_BITS) { + irqd = irq_get_irq_data(r->start); + if (!irqd) + break; + + irqd_set_trigger_type(irqd, r->flags & IORESOURCE_BITS); + } + + return r->start; + } + + return 0; +} + /** * i2c_new_device - instantiate an i2c device * @adap: the adapter managing the device @@ -1369,7 +1395,11 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info) client->flags = info->flags; client->addr = info->addr; + client->irq = info->irq; + if (!client->irq) + client->irq = i2c_dev_irq_from_resources(info->resources, + info->num_resources); strlcpy(client->name, info->type, sizeof(client->name)); diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c index 4a2a9e370be7..cedc665364cd 100644 --- a/drivers/input/gameport/gameport.c +++ b/drivers/input/gameport/gameport.c @@ -385,8 +385,8 @@ static int gameport_queue_event(void *object, struct module *owner, } if (!try_module_get(owner)) { - pr_warning("Can't get module reference, dropping event %d\n", - event_type); + pr_warn("Can't get module reference, dropping event %d\n", + event_type); kfree(event); retval = -EINVAL; goto out; @@ -542,9 +542,8 @@ static void gameport_init_port(struct gameport *gameport) INIT_LIST_HEAD(&gameport->node); spin_lock_init(&gameport->timer_lock); - init_timer(&gameport->poll_timer); - gameport->poll_timer.function = gameport_run_poll_handler; - gameport->poll_timer.data = (unsigned long)gameport; + setup_timer(&gameport->poll_timer, gameport_run_poll_handler, + (unsigned long)gameport); } /* diff --git a/drivers/input/joystick/db9.c b/drivers/input/joystick/db9.c index da326090c2b0..f4ad83eab67f 100644 --- a/drivers/input/joystick/db9.c +++ b/drivers/input/joystick/db9.c @@ -609,9 +609,7 @@ static void db9_attach(struct parport *pp) db9->pd = pd; db9->mode = mode; db9->parportno = pp->number; - init_timer(&db9->timer); - db9->timer.data = (long) db9; - db9->timer.function = db9_timer; + setup_timer(&db9->timer, db9_timer, (long)db9); for (i = 0; i < (min(db9_mode->n_pads, DB9_MAX_DEVICES)); i++) { diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c index eae14d512353..c43f087a496d 100644 --- a/drivers/input/joystick/gamecon.c +++ b/drivers/input/joystick/gamecon.c @@ -870,7 +870,8 @@ static int gc_setup_pad(struct gc *gc, int idx, int pad_type) err = gc_n64_init_ff(input_dev, idx); if (err) { - pr_warning("Failed to initiate rumble for N64 device %d\n", idx); + pr_warn("Failed to initiate rumble for N64 device %d\n", + idx); goto err_free_dev; } diff --git a/drivers/input/joystick/turbografx.c b/drivers/input/joystick/turbografx.c index 77f575dd0901..a1fdc75a438d 100644 --- a/drivers/input/joystick/turbografx.c +++ b/drivers/input/joystick/turbografx.c @@ -200,9 +200,7 @@ static void tgfx_attach(struct parport *pp) mutex_init(&tgfx->sem); tgfx->pd = pd; tgfx->parportno = pp->number; - init_timer(&tgfx->timer); - tgfx->timer.data = (long) tgfx; - tgfx->timer.function = tgfx_timer; + setup_timer(&tgfx->timer, tgfx_timer, (long)tgfx); for (i = 0; i < n_devs; i++) { if (n_buttons[i] < 1) diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 153b1ee13e03..df83fdc6c0e7 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -339,6 +339,64 @@ static struct usb_device_id xpad_table[] = { MODULE_DEVICE_TABLE(usb, xpad_table); +struct xboxone_init_packet { + u16 idVendor; + u16 idProduct; + const u8 *data; + u8 len; +}; + +#define XBOXONE_INIT_PKT(_vid, _pid, _data) \ + { \ + .idVendor = (_vid), \ + .idProduct = (_pid), \ + .data = (_data), \ + .len = ARRAY_SIZE(_data), \ + } + + +/* + * This packet is required for all Xbox One pads with 2015 + * or later firmware installed (or present from the factory). + */ +static const u8 xboxone_fw2015_init[] = { + 0x05, 0x20, 0x00, 0x01, 0x00 +}; + +/* + * This packet is required for the Titanfall 2 Xbox One pads + * (0x0e6f:0x0165) to finish initialization and for Hori pads + * (0x0f0d:0x0067) to make the analog sticks work. + */ +static const u8 xboxone_hori_init[] = { + 0x01, 0x20, 0x00, 0x09, 0x00, 0x04, 0x20, 0x3a, + 0x00, 0x00, 0x00, 0x80, 0x00 +}; + +/* + * A rumble packet is required for some PowerA pads to start + * sending input reports. One of those pads is (0x24c6:0x543a). + */ +static const u8 xboxone_zerorumble_init[] = { + 0x09, 0x00, 0x00, 0x09, 0x00, 0x0F, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +/* + * This specifies the selection of init packets that a gamepad + * will be sent on init *and* the order in which they will be + * sent. The correct sequence number will be added when the + * packet is going to be sent. + */ +static const struct xboxone_init_packet xboxone_init_packets[] = { + XBOXONE_INIT_PKT(0x0e6f, 0x0165, xboxone_hori_init), + XBOXONE_INIT_PKT(0x0f0d, 0x0067, xboxone_hori_init), + XBOXONE_INIT_PKT(0x0000, 0x0000, xboxone_fw2015_init), + XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_zerorumble_init), + XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_zerorumble_init), + XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_zerorumble_init), +}; + struct xpad_output_packet { u8 data[XPAD_PKT_LEN]; u8 len; @@ -375,6 +433,7 @@ struct usb_xpad { struct xpad_output_packet out_packets[XPAD_NUM_OUT_PACKETS]; int last_out_packet; + int init_seq; #if defined(CONFIG_JOYSTICK_XPAD_LEDS) struct xpad_led *led; @@ -750,11 +809,47 @@ exit: } /* Callers must hold xpad->odata_lock spinlock */ +static bool xpad_prepare_next_init_packet(struct usb_xpad *xpad) +{ + const struct xboxone_init_packet *init_packet; + + if (xpad->xtype != XTYPE_XBOXONE) + return false; + + /* Perform initialization sequence for Xbox One pads that require it */ + while (xpad->init_seq < ARRAY_SIZE(xboxone_init_packets)) { + init_packet = &xboxone_init_packets[xpad->init_seq++]; + + if (init_packet->idVendor != 0 && + init_packet->idVendor != xpad->dev->id.vendor) + continue; + + if (init_packet->idProduct != 0 && + init_packet->idProduct != xpad->dev->id.product) + continue; + + /* This packet applies to our device, so prepare to send it */ + memcpy(xpad->odata, init_packet->data, init_packet->len); + xpad->irq_out->transfer_buffer_length = init_packet->len; + + /* Update packet with current sequence number */ + xpad->odata[2] = xpad->odata_serial++; + return true; + } + + return false; +} + +/* Callers must hold xpad->odata_lock spinlock */ static bool xpad_prepare_next_out_packet(struct usb_xpad *xpad) { struct xpad_output_packet *pkt, *packet = NULL; int i; + /* We may have init packets to send before we can send user commands */ + if (xpad_prepare_next_init_packet(xpad)) + return true; + for (i = 0; i < XPAD_NUM_OUT_PACKETS; i++) { if (++xpad->last_out_packet >= XPAD_NUM_OUT_PACKETS) xpad->last_out_packet = 0; @@ -940,24 +1035,17 @@ static int xpad_inquiry_pad_presence(struct usb_xpad *xpad) static int xpad_start_xbox_one(struct usb_xpad *xpad) { - struct xpad_output_packet *packet = - &xpad->out_packets[XPAD_OUT_CMD_IDX]; unsigned long flags; int retval; spin_lock_irqsave(&xpad->odata_lock, flags); - /* Xbox one controller needs to be initialized. */ - packet->data[0] = 0x05; - packet->data[1] = 0x20; - packet->data[2] = xpad->odata_serial++; /* packet serial */ - packet->data[3] = 0x01; /* rumble bit enable? */ - packet->data[4] = 0x00; - packet->len = 5; - packet->pending = true; - - /* Reset the sequence so we send out start packet first */ - xpad->last_out_packet = -1; + /* + * Begin the init sequence by attempting to send a packet. + * We will cycle through the init packet sequence before + * sending any packets from the output ring. + */ + xpad->init_seq = 0; retval = xpad_try_sending_next_out_packet(xpad); spin_unlock_irqrestore(&xpad->odata_lock, flags); diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c index 6a250d65f8fe..c7a8120b13c0 100644 --- a/drivers/input/keyboard/cros_ec_keyb.c +++ b/drivers/input/keyboard/cros_ec_keyb.c @@ -30,6 +30,7 @@ #include <linux/notifier.h> #include <linux/platform_device.h> #include <linux/slab.h> +#include <linux/sysrq.h> #include <linux/input/matrix_keypad.h> #include <linux/mfd/cros_ec.h> #include <linux/mfd/cros_ec_commands.h> @@ -260,6 +261,12 @@ static int cros_ec_keyb_work(struct notifier_block *nb, ckdev->ec->event_size); break; + case EC_MKBP_EVENT_SYSRQ: + val = get_unaligned_le32(&ckdev->ec->event_data.data.sysrq); + dev_dbg(ckdev->dev, "sysrq code from EC: %#x\n", val); + handle_sysrq(val); + break; + case EC_MKBP_EVENT_BUTTON: case EC_MKBP_EVENT_SWITCH: /* diff --git a/drivers/input/keyboard/locomokbd.c b/drivers/input/keyboard/locomokbd.c index c94d610b9d78..0d74312d5b02 100644 --- a/drivers/input/keyboard/locomokbd.c +++ b/drivers/input/keyboard/locomokbd.c @@ -264,9 +264,8 @@ static int locomokbd_probe(struct locomo_dev *dev) spin_lock_init(&locomokbd->lock); - init_timer(&locomokbd->timer); - locomokbd->timer.function = locomokbd_timer_callback; - locomokbd->timer.data = (unsigned long) locomokbd; + setup_timer(&locomokbd->timer, locomokbd_timer_callback, + (unsigned long)locomokbd); locomokbd->suspend_jiffies = jiffies; diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c index 18839cd5f76e..1f316d66e6f7 100644 --- a/drivers/input/keyboard/matrix_keypad.c +++ b/drivers/input/keyboard/matrix_keypad.c @@ -42,9 +42,10 @@ struct matrix_keypad { }; /* - * NOTE: normally the GPIO has to be put into HiZ when de-activated to cause - * minmal side effect when scanning other columns, here it is configured to - * be input, and it should work on most platforms. + * NOTE: If drive_inactive_cols is false, then the GPIO has to be put into + * HiZ when de-activated to cause minmal side effect when scanning other + * columns. In that case it is configured here to be input, otherwise it is + * driven with the inactive value. */ static void __activate_col(const struct matrix_keypad_platform_data *pdata, int col, bool on) @@ -55,7 +56,8 @@ static void __activate_col(const struct matrix_keypad_platform_data *pdata, gpio_direction_output(pdata->col_gpios[col], level_on); } else { gpio_set_value_cansleep(pdata->col_gpios[col], !level_on); - gpio_direction_input(pdata->col_gpios[col]); + if (!pdata->drive_inactive_cols) + gpio_direction_input(pdata->col_gpios[col]); } } @@ -432,6 +434,9 @@ matrix_keypad_parse_dt(struct device *dev) if (of_get_property(np, "gpio-activelow", NULL)) pdata->active_low = true; + pdata->drive_inactive_cols = + of_property_read_bool(np, "drive-inactive-cols"); + of_property_read_u32(np, "debounce-delay-ms", &pdata->debounce_ms); of_property_read_u32(np, "col-scan-delay-us", &pdata->col_scan_delay_us); diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c index ebc67ba41fe2..940d38b08e6b 100644 --- a/drivers/input/keyboard/omap4-keypad.c +++ b/drivers/input/keyboard/omap4-keypad.c @@ -358,7 +358,7 @@ static int omap4_keypad_probe(struct platform_device *pdev) "omap4-keypad", keypad_data); if (error) { dev_err(&pdev->dev, "failed to register interrupt\n"); - goto err_free_input; + goto err_free_keymap; } device_init_wakeup(&pdev->dev, true); diff --git a/drivers/input/keyboard/qt1070.c b/drivers/input/keyboard/qt1070.c index 5a5778729e37..76bb51309a78 100644 --- a/drivers/input/keyboard/qt1070.c +++ b/drivers/input/keyboard/qt1070.c @@ -274,9 +274,18 @@ static const struct i2c_device_id qt1070_id[] = { }; MODULE_DEVICE_TABLE(i2c, qt1070_id); +#ifdef CONFIG_OF +static const struct of_device_id qt1070_of_match[] = { + { .compatible = "qt1070", }, + { }, +}; +MODULE_DEVICE_TABLE(of, qt1070_of_match); +#endif + static struct i2c_driver qt1070_driver = { .driver = { .name = "qt1070", + .of_match_table = of_match_ptr(qt1070_of_match), .pm = &qt1070_pm_ops, }, .id_table = qt1070_id, diff --git a/drivers/input/keyboard/tca8418_keypad.c b/drivers/input/keyboard/tca8418_keypad.c index 44dd7689c571..e37e335e406f 100644 --- a/drivers/input/keyboard/tca8418_keypad.c +++ b/drivers/input/keyboard/tca8418_keypad.c @@ -188,8 +188,6 @@ static void tca8418_read_keypad(struct tca8418_keypad *keypad_data) input_event(input, EV_MSC, MSC_SCAN, code); input_report_key(input, keymap[code], state); - /* Read for next loop */ - error = tca8418_read_byte(keypad_data, REG_KEY_EVENT_A, ®); } while (1); input_sync(input); diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 9f7b72249eac..3872488c3fd7 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -143,7 +143,7 @@ config INPUT_PM8941_PWRKEY config INPUT_PM8XXX_VIBRATOR tristate "Qualcomm PM8XXX vibrator support" - depends on MFD_PM8XXX + depends on MFD_PM8XXX || MFD_SPMI_PMIC select INPUT_FF_MEMLESS help This option enables device driver support for the vibrator diff --git a/drivers/input/misc/apanel.c b/drivers/input/misc/apanel.c index 53630afab606..aad1df04c854 100644 --- a/drivers/input/misc/apanel.c +++ b/drivers/input/misc/apanel.c @@ -314,7 +314,8 @@ static int __init apanel_init(void) if (devno >= APANEL_DEV_MAX) pr_notice(APANEL ": unknown device %u found\n", devno); else if (device_chip[devno] != CHIP_NONE) - pr_warning(APANEL ": duplicate entry for devno %u\n", devno); + pr_warn(APANEL ": duplicate entry for devno %u\n", + devno); else if (method != 1 && method != 2 && method != 4) { pr_notice(APANEL ": unknown method %u for devno %u\n", diff --git a/drivers/input/misc/axp20x-pek.c b/drivers/input/misc/axp20x-pek.c index 1ac898db303a..f11807db6979 100644 --- a/drivers/input/misc/axp20x-pek.c +++ b/drivers/input/misc/axp20x-pek.c @@ -13,6 +13,7 @@ * GNU General Public License for more details. */ +#include <linux/acpi.h> #include <linux/errno.h> #include <linux/irq.h> #include <linux/init.h> @@ -188,21 +189,13 @@ static void axp20x_remove_sysfs_group(void *_data) sysfs_remove_group(&dev->kobj, &axp20x_attribute_group); } -static int axp20x_pek_probe(struct platform_device *pdev) +static int axp20x_pek_probe_input_device(struct axp20x_pek *axp20x_pek, + struct platform_device *pdev) { - struct axp20x_pek *axp20x_pek; - struct axp20x_dev *axp20x; + struct axp20x_dev *axp20x = axp20x_pek->axp20x; struct input_dev *idev; int error; - axp20x_pek = devm_kzalloc(&pdev->dev, sizeof(struct axp20x_pek), - GFP_KERNEL); - if (!axp20x_pek) - return -ENOMEM; - - axp20x_pek->axp20x = dev_get_drvdata(pdev->dev.parent); - axp20x = axp20x_pek->axp20x; - axp20x_pek->irq_dbr = platform_get_irq_byname(pdev, "PEK_DBR"); if (axp20x_pek->irq_dbr < 0) { dev_err(&pdev->dev, "No IRQ for PEK_DBR, error=%d\n", @@ -239,7 +232,7 @@ static int axp20x_pek_probe(struct platform_device *pdev) axp20x_pek_irq, 0, "axp20x-pek-dbr", idev); if (error < 0) { - dev_err(axp20x->dev, "Failed to request dbr IRQ#%d: %d\n", + dev_err(&pdev->dev, "Failed to request dbr IRQ#%d: %d\n", axp20x_pek->irq_dbr, error); return error; } @@ -248,30 +241,57 @@ static int axp20x_pek_probe(struct platform_device *pdev) axp20x_pek_irq, 0, "axp20x-pek-dbf", idev); if (error < 0) { - dev_err(axp20x->dev, "Failed to request dbf IRQ#%d: %d\n", + dev_err(&pdev->dev, "Failed to request dbf IRQ#%d: %d\n", axp20x_pek->irq_dbf, error); return error; } - error = sysfs_create_group(&pdev->dev.kobj, &axp20x_attribute_group); + error = input_register_device(idev); if (error) { - dev_err(axp20x->dev, "Failed to create sysfs attributes: %d\n", + dev_err(&pdev->dev, "Can't register input device: %d\n", error); return error; } - error = devm_add_action(&pdev->dev, - axp20x_remove_sysfs_group, &pdev->dev); + return 0; +} + +static int axp20x_pek_probe(struct platform_device *pdev) +{ + struct axp20x_pek *axp20x_pek; + int error; + + axp20x_pek = devm_kzalloc(&pdev->dev, sizeof(struct axp20x_pek), + GFP_KERNEL); + if (!axp20x_pek) + return -ENOMEM; + + axp20x_pek->axp20x = dev_get_drvdata(pdev->dev.parent); + + /* + * Do not register the input device if there is an "INTCFD9" + * gpio button ACPI device, that handles the power button too, + * and otherwise we end up reporting all presses twice. + */ + if (!acpi_dev_found("INTCFD9") || + !IS_ENABLED(CONFIG_INPUT_SOC_BUTTON_ARRAY)) { + error = axp20x_pek_probe_input_device(axp20x_pek, pdev); + if (error) + return error; + } + + error = sysfs_create_group(&pdev->dev.kobj, &axp20x_attribute_group); if (error) { - axp20x_remove_sysfs_group(&pdev->dev); - dev_err(&pdev->dev, "Failed to add sysfs cleanup action: %d\n", + dev_err(&pdev->dev, "Failed to create sysfs attributes: %d\n", error); return error; } - error = input_register_device(idev); + error = devm_add_action(&pdev->dev, + axp20x_remove_sysfs_group, &pdev->dev); if (error) { - dev_err(axp20x->dev, "Can't register input device: %d\n", + axp20x_remove_sysfs_group(&pdev->dev); + dev_err(&pdev->dev, "Failed to add sysfs cleanup action: %d\n", error); return error; } diff --git a/drivers/input/misc/bma150.c b/drivers/input/misc/bma150.c index 1fa85379f86c..1efcfdf9f8a8 100644 --- a/drivers/input/misc/bma150.c +++ b/drivers/input/misc/bma150.c @@ -70,7 +70,6 @@ #define BMA150_CFG_5_REG 0x11 #define BMA150_CHIP_ID 2 -#define BMA180_CHIP_ID 3 #define BMA150_CHIP_ID_REG BMA150_DATA_0_REG #define BMA150_ACC_X_LSB_REG BMA150_DATA_2_REG @@ -538,13 +537,8 @@ static int bma150_probe(struct i2c_client *client, return -EIO; } - /* - * Note if the IIO CONFIG_BMA180 driver is enabled we want to fail - * the probe for the bma180 as the iio driver is preferred. - */ chip_id = i2c_smbus_read_byte_data(client, BMA150_CHIP_ID_REG); - if (chip_id != BMA150_CHIP_ID && - (IS_ENABLED(CONFIG_BMA180) || chip_id != BMA180_CHIP_ID)) { + if (chip_id != BMA150_CHIP_ID) { dev_err(&client->dev, "BMA150 chip id error: %d\n", chip_id); return -EINVAL; } @@ -648,9 +642,6 @@ static UNIVERSAL_DEV_PM_OPS(bma150_pm, bma150_suspend, bma150_resume, NULL); static const struct i2c_device_id bma150_id[] = { { "bma150", 0 }, -#if !IS_ENABLED(CONFIG_BMA180) - { "bma180", 0 }, -#endif { "smb380", 0 }, { "bma023", 0 }, { } diff --git a/drivers/input/misc/dm355evm_keys.c b/drivers/input/misc/dm355evm_keys.c index 82e272ebc0ed..bab256ef32b9 100644 --- a/drivers/input/misc/dm355evm_keys.c +++ b/drivers/input/misc/dm355evm_keys.c @@ -32,7 +32,6 @@ struct dm355evm_keys { struct input_dev *input; struct device *dev; - int irq; }; /* These initial keycodes can be remapped */ @@ -176,74 +175,49 @@ static int dm355evm_keys_probe(struct platform_device *pdev) { struct dm355evm_keys *keys; struct input_dev *input; - int status; + int irq; + int error; - /* allocate instance struct and input dev */ - keys = kzalloc(sizeof *keys, GFP_KERNEL); - input = input_allocate_device(); - if (!keys || !input) { - status = -ENOMEM; - goto fail1; - } + keys = devm_kzalloc(&pdev->dev, sizeof (*keys), GFP_KERNEL); + if (!keys) + return -ENOMEM; + + input = devm_input_allocate_device(&pdev->dev); + if (!input) + return -ENOMEM; keys->dev = &pdev->dev; keys->input = input; - /* set up "threaded IRQ handler" */ - status = platform_get_irq(pdev, 0); - if (status < 0) - goto fail1; - keys->irq = status; - input->name = "DM355 EVM Controls"; input->phys = "dm355evm/input0"; - input->dev.parent = &pdev->dev; input->id.bustype = BUS_I2C; input->id.product = 0x0355; input->id.version = dm355evm_msp_read(DM355EVM_MSP_FIRMREV); - status = sparse_keymap_setup(input, dm355evm_keys, NULL); - if (status) - goto fail1; + error = sparse_keymap_setup(input, dm355evm_keys, NULL); + if (error) + return error; /* REVISIT: flush the event queue? */ - status = request_threaded_irq(keys->irq, NULL, dm355evm_keys_irq, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - dev_name(&pdev->dev), keys); - if (status < 0) - goto fail2; - - /* register */ - status = input_register_device(input); - if (status < 0) - goto fail3; - - platform_set_drvdata(pdev, keys); - - return 0; - -fail3: - free_irq(keys->irq, keys); -fail2: - sparse_keymap_free(input); -fail1: - input_free_device(input); - kfree(keys); - dev_err(&pdev->dev, "can't register, err %d\n", status); - - return status; -} + /* set up "threaded IRQ handler" */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; -static int dm355evm_keys_remove(struct platform_device *pdev) -{ - struct dm355evm_keys *keys = platform_get_drvdata(pdev); + error = devm_request_threaded_irq(&pdev->dev, irq, + NULL, dm355evm_keys_irq, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + dev_name(&pdev->dev), keys); + if (error) + return error; - free_irq(keys->irq, keys); - sparse_keymap_free(keys->input); - input_unregister_device(keys->input); - kfree(keys); + /* register */ + error = input_register_device(input); + if (error) + return error; return 0; } @@ -259,7 +233,6 @@ static int dm355evm_keys_remove(struct platform_device *pdev) */ static struct platform_driver dm355evm_keys_driver = { .probe = dm355evm_keys_probe, - .remove = dm355evm_keys_remove, .driver = { .name = "dm355evm_keys", }, diff --git a/drivers/input/misc/drv260x.c b/drivers/input/misc/drv260x.c index fb089d36c0d6..17eb84ab4c0b 100644 --- a/drivers/input/misc/drv260x.c +++ b/drivers/input/misc/drv260x.c @@ -652,7 +652,6 @@ static const struct i2c_device_id drv260x_id[] = { }; MODULE_DEVICE_TABLE(i2c, drv260x_id); -#ifdef CONFIG_OF static const struct of_device_id drv260x_of_match[] = { { .compatible = "ti,drv2604", }, { .compatible = "ti,drv2604l", }, @@ -661,13 +660,12 @@ static const struct of_device_id drv260x_of_match[] = { { } }; MODULE_DEVICE_TABLE(of, drv260x_of_match); -#endif static struct i2c_driver drv260x_driver = { .probe = drv260x_probe, .driver = { .name = "drv260x-haptics", - .of_match_table = of_match_ptr(drv260x_of_match), + .of_match_table = drv260x_of_match, .pm = &drv260x_pm_ops, }, .id_table = drv260x_id, diff --git a/drivers/input/misc/pm8xxx-vibrator.c b/drivers/input/misc/pm8xxx-vibrator.c index 5113877153d7..7dd1c1fbe42a 100644 --- a/drivers/input/misc/pm8xxx-vibrator.c +++ b/drivers/input/misc/pm8xxx-vibrator.c @@ -10,19 +10,15 @@ * GNU General Public License for more details. */ -#include <linux/module.h> -#include <linux/kernel.h> #include <linux/errno.h> -#include <linux/platform_device.h> #include <linux/input.h> -#include <linux/slab.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> #include <linux/regmap.h> - -#define VIB_DRV 0x4A - -#define VIB_DRV_SEL_MASK 0xf8 -#define VIB_DRV_SEL_SHIFT 0x03 -#define VIB_DRV_EN_MANUAL_MASK 0xfc +#include <linux/slab.h> #define VIB_MAX_LEVEL_mV (3100) #define VIB_MIN_LEVEL_mV (1200) @@ -30,20 +26,48 @@ #define MAX_FF_SPEED 0xff +struct pm8xxx_regs { + unsigned int enable_addr; + unsigned int enable_mask; + + unsigned int drv_addr; + unsigned int drv_mask; + unsigned int drv_shift; + unsigned int drv_en_manual_mask; +}; + +static const struct pm8xxx_regs pm8058_regs = { + .drv_addr = 0x4A, + .drv_mask = 0xf8, + .drv_shift = 3, + .drv_en_manual_mask = 0xfc, +}; + +static struct pm8xxx_regs pm8916_regs = { + .enable_addr = 0xc046, + .enable_mask = BIT(7), + .drv_addr = 0xc041, + .drv_mask = 0x1F, + .drv_shift = 0, + .drv_en_manual_mask = 0, +}; + /** * struct pm8xxx_vib - structure to hold vibrator data * @vib_input_dev: input device supporting force feedback * @work: work structure to set the vibration parameters * @regmap: regmap for register read/write + * @regs: registers' info * @speed: speed of vibration set from userland * @active: state of vibrator * @level: level of vibration to set in the chip - * @reg_vib_drv: VIB_DRV register value + * @reg_vib_drv: regs->drv_addr register value */ struct pm8xxx_vib { struct input_dev *vib_input_dev; struct work_struct work; struct regmap *regmap; + const struct pm8xxx_regs *regs; int speed; int level; bool active; @@ -59,18 +83,24 @@ static int pm8xxx_vib_set(struct pm8xxx_vib *vib, bool on) { int rc; unsigned int val = vib->reg_vib_drv; + const struct pm8xxx_regs *regs = vib->regs; if (on) - val |= ((vib->level << VIB_DRV_SEL_SHIFT) & VIB_DRV_SEL_MASK); + val |= (vib->level << regs->drv_shift) & regs->drv_mask; else - val &= ~VIB_DRV_SEL_MASK; + val &= ~regs->drv_mask; - rc = regmap_write(vib->regmap, VIB_DRV, val); + rc = regmap_write(vib->regmap, regs->drv_addr, val); if (rc < 0) return rc; vib->reg_vib_drv = val; - return 0; + + if (regs->enable_mask) + rc = regmap_update_bits(vib->regmap, regs->enable_addr, + on ? regs->enable_mask : 0, val); + + return rc; } /** @@ -80,10 +110,11 @@ static int pm8xxx_vib_set(struct pm8xxx_vib *vib, bool on) static void pm8xxx_work_handler(struct work_struct *work) { struct pm8xxx_vib *vib = container_of(work, struct pm8xxx_vib, work); + const struct pm8xxx_regs *regs = vib->regs; int rc; unsigned int val; - rc = regmap_read(vib->regmap, VIB_DRV, &val); + rc = regmap_read(vib->regmap, regs->drv_addr, &val); if (rc < 0) return; @@ -147,6 +178,7 @@ static int pm8xxx_vib_probe(struct platform_device *pdev) struct input_dev *input_dev; int error; unsigned int val; + const struct pm8xxx_regs *regs; vib = devm_kzalloc(&pdev->dev, sizeof(*vib), GFP_KERNEL); if (!vib) @@ -163,16 +195,19 @@ static int pm8xxx_vib_probe(struct platform_device *pdev) INIT_WORK(&vib->work, pm8xxx_work_handler); vib->vib_input_dev = input_dev; + regs = of_device_get_match_data(&pdev->dev); + /* operate in manual mode */ - error = regmap_read(vib->regmap, VIB_DRV, &val); + error = regmap_read(vib->regmap, regs->drv_addr, &val); if (error < 0) return error; - val &= ~VIB_DRV_EN_MANUAL_MASK; - error = regmap_write(vib->regmap, VIB_DRV, val); + val &= regs->drv_en_manual_mask; + error = regmap_write(vib->regmap, regs->drv_addr, val); if (error < 0) return error; + vib->regs = regs; vib->reg_vib_drv = val; input_dev->name = "pm8xxx_vib_ffmemless"; @@ -212,8 +247,9 @@ static int __maybe_unused pm8xxx_vib_suspend(struct device *dev) static SIMPLE_DEV_PM_OPS(pm8xxx_vib_pm_ops, pm8xxx_vib_suspend, NULL); static const struct of_device_id pm8xxx_vib_id_table[] = { - { .compatible = "qcom,pm8058-vib" }, - { .compatible = "qcom,pm8921-vib" }, + { .compatible = "qcom,pm8058-vib", .data = &pm8058_regs }, + { .compatible = "qcom,pm8921-vib", .data = &pm8058_regs }, + { .compatible = "qcom,pm8916-vib", .data = &pm8916_regs }, { } }; MODULE_DEVICE_TABLE(of, pm8xxx_vib_id_table); diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c index e53801dbd560..edca0d737750 100644 --- a/drivers/input/misc/pwm-beeper.c +++ b/drivers/input/misc/pwm-beeper.c @@ -19,6 +19,7 @@ #include <linux/kernel.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/pwm.h> #include <linux/slab.h> #include <linux/workqueue.h> @@ -29,6 +30,7 @@ struct pwm_beeper { struct regulator *amplifier; struct work_struct work; unsigned long period; + unsigned int bell_frequency; bool suspended; bool amplifier_on; }; @@ -94,7 +96,7 @@ static int pwm_beeper_event(struct input_dev *input, switch (code) { case SND_BELL: - value = value ? 1000 : 0; + value = value ? beeper->bell_frequency : 0; break; case SND_TONE: break; @@ -131,6 +133,7 @@ static int pwm_beeper_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct pwm_beeper *beeper; struct pwm_state state; + u32 bell_frequency; int error; beeper = devm_kzalloc(dev, sizeof(*beeper), GFP_KERNEL); @@ -167,6 +170,16 @@ static int pwm_beeper_probe(struct platform_device *pdev) INIT_WORK(&beeper->work, pwm_beeper_work); + error = device_property_read_u32(dev, "beeper-hz", &bell_frequency); + if (error) { + bell_frequency = 1000; + dev_dbg(dev, + "failed to parse 'beeper-hz' property, using default: %uHz\n", + bell_frequency); + } + + beeper->bell_frequency = bell_frequency; + beeper->input = devm_input_allocate_device(dev); if (!beeper->input) { dev_err(dev, "Failed to allocate input device\n"); diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c index ddb2f22fca7a..f210a3322559 100644 --- a/drivers/input/misc/soc_button_array.c +++ b/drivers/input/misc/soc_button_array.c @@ -20,13 +20,6 @@ #include <linux/gpio.h> #include <linux/platform_device.h> -/* - * Definition of buttons on the tablet. The ACPI index of each button - * is defined in section 2.8.7.2 of "Windows ACPI Design Guide for SoC - * Platforms" - */ -#define MAX_NBUTTONS 5 - struct soc_button_info { const char *name; int acpi_index; @@ -55,7 +48,7 @@ static int soc_button_lookup_gpio(struct device *dev, int acpi_index) struct gpio_desc *desc; int gpio; - desc = gpiod_get_index(dev, KBUILD_MODNAME, acpi_index, GPIOD_ASIS); + desc = gpiod_get_index(dev, NULL, acpi_index, GPIOD_ASIS); if (IS_ERR(desc)) return PTR_ERR(desc); @@ -79,14 +72,19 @@ soc_button_device_create(struct platform_device *pdev, int gpio; int error; + for (info = button_info; info->name; info++) + if (info->autorepeat == autorepeat) + n_buttons++; + gpio_keys_pdata = devm_kzalloc(&pdev->dev, sizeof(*gpio_keys_pdata) + - sizeof(*gpio_keys) * MAX_NBUTTONS, + sizeof(*gpio_keys) * n_buttons, GFP_KERNEL); if (!gpio_keys_pdata) return ERR_PTR(-ENOMEM); gpio_keys = (void *)(gpio_keys_pdata + 1); + n_buttons = 0; for (info = button_info; info->name; info++) { if (info->autorepeat != autorepeat) @@ -140,6 +138,153 @@ err_free_mem: return ERR_PTR(error); } +static int soc_button_get_acpi_object_int(const union acpi_object *obj) +{ + if (obj->type != ACPI_TYPE_INTEGER) + return -1; + + return obj->integer.value; +} + +/* Parse a single ACPI0011 _DSD button descriptor */ +static int soc_button_parse_btn_desc(struct device *dev, + const union acpi_object *desc, + int collection_uid, + struct soc_button_info *info) +{ + int upage, usage; + + if (desc->type != ACPI_TYPE_PACKAGE || + desc->package.count != 5 || + /* First byte should be 1 (control) */ + soc_button_get_acpi_object_int(&desc->package.elements[0]) != 1 || + /* Third byte should be collection uid */ + soc_button_get_acpi_object_int(&desc->package.elements[2]) != + collection_uid) { + dev_err(dev, "Invalid ACPI Button Descriptor\n"); + return -ENODEV; + } + + info->event_type = EV_KEY; + info->acpi_index = + soc_button_get_acpi_object_int(&desc->package.elements[1]); + upage = soc_button_get_acpi_object_int(&desc->package.elements[3]); + usage = soc_button_get_acpi_object_int(&desc->package.elements[4]); + + /* + * The UUID: fa6bd625-9ce8-470d-a2c7-b3ca36c4282e descriptors use HID + * usage page and usage codes, but otherwise the device is not HID + * compliant: it uses one irq per button instead of generating HID + * input reports and some buttons should generate wakeups where as + * others should not, so we cannot use the HID subsystem. + * + * Luckily all devices only use a few usage page + usage combinations, + * so we can simply check for the known combinations here. + */ + if (upage == 0x01 && usage == 0x81) { + info->name = "power"; + info->event_code = KEY_POWER; + info->wakeup = true; + } else if (upage == 0x07 && usage == 0xe3) { + info->name = "home"; + info->event_code = KEY_LEFTMETA; + info->wakeup = true; + } else if (upage == 0x0c && usage == 0xe9) { + info->name = "volume_up"; + info->event_code = KEY_VOLUMEUP; + info->autorepeat = true; + } else if (upage == 0x0c && usage == 0xea) { + info->name = "volume_down"; + info->event_code = KEY_VOLUMEDOWN; + info->autorepeat = true; + } else { + dev_warn(dev, "Unknown button index %d upage %02x usage %02x, ignoring\n", + info->acpi_index, upage, usage); + info->name = "unknown"; + info->event_code = KEY_RESERVED; + } + + return 0; +} + +/* ACPI0011 _DSD btns descriptors UUID: fa6bd625-9ce8-470d-a2c7-b3ca36c4282e */ +static const u8 btns_desc_uuid[16] = { + 0x25, 0xd6, 0x6b, 0xfa, 0xe8, 0x9c, 0x0d, 0x47, + 0xa2, 0xc7, 0xb3, 0xca, 0x36, 0xc4, 0x28, 0x2e +}; + +/* Parse ACPI0011 _DSD button descriptors */ +static struct soc_button_info *soc_button_get_button_info(struct device *dev) +{ + struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER }; + const union acpi_object *desc, *el0, *uuid, *btns_desc = NULL; + struct soc_button_info *button_info; + acpi_status status; + int i, btn, collection_uid = -1; + + status = acpi_evaluate_object_typed(ACPI_HANDLE(dev), "_DSD", NULL, + &buf, ACPI_TYPE_PACKAGE); + if (ACPI_FAILURE(status)) { + dev_err(dev, "ACPI _DSD object not found\n"); + return ERR_PTR(-ENODEV); + } + + /* Look for the Button Descriptors UUID */ + desc = buf.pointer; + for (i = 0; (i + 1) < desc->package.count; i += 2) { + uuid = &desc->package.elements[i]; + + if (uuid->type != ACPI_TYPE_BUFFER || + uuid->buffer.length != 16 || + desc->package.elements[i + 1].type != ACPI_TYPE_PACKAGE) { + break; + } + + if (memcmp(uuid->buffer.pointer, btns_desc_uuid, 16) == 0) { + btns_desc = &desc->package.elements[i + 1]; + break; + } + } + + if (!btns_desc) { + dev_err(dev, "ACPI Button Descriptors not found\n"); + return ERR_PTR(-ENODEV); + } + + /* The first package describes the collection */ + el0 = &btns_desc->package.elements[0]; + if (el0->type == ACPI_TYPE_PACKAGE && + el0->package.count == 5 && + /* First byte should be 0 (collection) */ + soc_button_get_acpi_object_int(&el0->package.elements[0]) == 0 && + /* Third byte should be 0 (top level collection) */ + soc_button_get_acpi_object_int(&el0->package.elements[2]) == 0) { + collection_uid = soc_button_get_acpi_object_int( + &el0->package.elements[1]); + } + if (collection_uid == -1) { + dev_err(dev, "Invalid Button Collection Descriptor\n"); + return ERR_PTR(-ENODEV); + } + + /* There are package.count - 1 buttons + 1 terminating empty entry */ + button_info = devm_kcalloc(dev, btns_desc->package.count, + sizeof(*button_info), GFP_KERNEL); + if (!button_info) + return ERR_PTR(-ENOMEM); + + /* Parse the button descriptors */ + for (i = 1, btn = 0; i < btns_desc->package.count; i++, btn++) { + if (soc_button_parse_btn_desc(dev, + &btns_desc->package.elements[i], + collection_uid, + &button_info[btn])) + return ERR_PTR(-ENODEV); + } + + return button_info; +} + static int soc_button_remove(struct platform_device *pdev) { struct soc_button_data *priv = platform_get_drvdata(pdev); @@ -167,9 +312,15 @@ static int soc_button_probe(struct platform_device *pdev) if (!id) return -ENODEV; - button_info = (struct soc_button_info *)id->driver_data; + if (!id->driver_data) { + button_info = soc_button_get_button_info(dev); + if (IS_ERR(button_info)) + return PTR_ERR(button_info); + } else { + button_info = (struct soc_button_info *)id->driver_data; + } - if (gpiod_count(dev, KBUILD_MODNAME) <= 0) { + if (gpiod_count(dev, NULL) <= 0) { dev_dbg(dev, "no GPIO attached, ignoring...\n"); return -ENODEV; } @@ -197,9 +348,17 @@ static int soc_button_probe(struct platform_device *pdev) if (!priv->children[0] && !priv->children[1]) return -ENODEV; + if (!id->driver_data) + devm_kfree(dev, button_info); + return 0; } +/* + * Definition of buttons on the tablet. The ACPI index of each button + * is defined in section 2.8.7.2 of "Windows ACPI Design Guide for SoC + * Platforms" + */ static struct soc_button_info soc_button_PNP0C40[] = { { "power", 0, EV_KEY, KEY_POWER, false, true }, { "home", 1, EV_KEY, KEY_LEFTMETA, false, true }, @@ -211,6 +370,7 @@ static struct soc_button_info soc_button_PNP0C40[] = { static const struct acpi_device_id soc_button_acpi_match[] = { { "PNP0C40", (unsigned long)soc_button_PNP0C40 }, + { "ACPI0011", 0 }, { } }; diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c index 54162d2cbcfc..1c13005b228f 100644 --- a/drivers/input/misc/twl4030-pwrbutton.c +++ b/drivers/input/misc/twl4030-pwrbutton.c @@ -64,13 +64,12 @@ static int twl4030_pwrbutton_probe(struct platform_device *pdev) return -ENOMEM; } - pwr->evbit[0] = BIT_MASK(EV_KEY); - pwr->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER); + input_set_capability(pwr, EV_KEY, KEY_POWER); pwr->name = "twl4030_pwrbutton"; pwr->phys = "twl4030_pwrbutton/input0"; pwr->dev.parent = &pdev->dev; - err = devm_request_threaded_irq(&pwr->dev, irq, NULL, powerbutton_irq, + err = devm_request_threaded_irq(&pdev->dev, irq, NULL, powerbutton_irq, IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT, "twl4030_pwrbutton", pwr); diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c index e25f87ba19f6..43e67f546366 100644 --- a/drivers/input/misc/wistron_btns.c +++ b/drivers/input/misc/wistron_btns.c @@ -1243,12 +1243,10 @@ static int setup_input_dev(void) error = input_register_polled_device(wistron_idev); if (error) - goto err_free_keymap; + goto err_free_dev; return 0; - err_free_keymap: - sparse_keymap_free(input_dev); err_free_dev: input_free_polled_device(wistron_idev); return error; @@ -1300,7 +1298,6 @@ static int wistron_remove(struct platform_device *dev) { wistron_led_remove(); input_unregister_polled_device(wistron_idev); - sparse_keymap_free(wistron_idev->input); input_free_polled_device(wistron_idev); bios_detach(); diff --git a/drivers/input/misc/xen-kbdfront.c b/drivers/input/misc/xen-kbdfront.c index 3900875dec10..690148f9940e 100644 --- a/drivers/input/misc/xen-kbdfront.c +++ b/drivers/input/misc/xen-kbdfront.c @@ -41,6 +41,12 @@ struct xenkbd_info { char phys[32]; }; +enum { KPARAM_X, KPARAM_Y, KPARAM_CNT }; +static int ptr_size[KPARAM_CNT] = { XENFB_WIDTH, XENFB_HEIGHT }; +module_param_array(ptr_size, int, NULL, 0444); +MODULE_PARM_DESC(ptr_size, + "Pointing device width, height in pixels (default 800,600)"); + static int xenkbd_remove(struct xenbus_device *); static int xenkbd_connect_backend(struct xenbus_device *, struct xenkbd_info *); static void xenkbd_disconnect_backend(struct xenkbd_info *); @@ -84,8 +90,8 @@ static irqreturn_t input_handler(int rq, void *dev_id) input_report_key(dev, event->key.keycode, event->key.pressed); else - pr_warning("unhandled keycode 0x%x\n", - event->key.keycode); + pr_warn("unhandled keycode 0x%x\n", + event->key.keycode); break; case XENKBD_TYPE_POS: input_report_abs(dev, ABS_X, event->pos.abs_x); @@ -128,12 +134,17 @@ static int xenkbd_probe(struct xenbus_device *dev, if (!info->page) goto error_nomem; + /* Set input abs params to match backend screen res */ abs = xenbus_read_unsigned(dev->otherend, "feature-abs-pointer", 0); + ptr_size[KPARAM_X] = xenbus_read_unsigned(dev->otherend, "width", + ptr_size[KPARAM_X]); + ptr_size[KPARAM_Y] = xenbus_read_unsigned(dev->otherend, "height", + ptr_size[KPARAM_Y]); if (abs) { ret = xenbus_write(XBT_NIL, dev->nodename, "request-abs-pointer", "1"); if (ret) { - pr_warning("xenkbd: can't request abs-pointer"); + pr_warn("xenkbd: can't request abs-pointer\n"); abs = 0; } } @@ -174,8 +185,8 @@ static int xenkbd_probe(struct xenbus_device *dev, if (abs) { __set_bit(EV_ABS, ptr->evbit); - input_set_abs_params(ptr, ABS_X, 0, XENFB_WIDTH, 0, 0); - input_set_abs_params(ptr, ABS_Y, 0, XENFB_HEIGHT, 0, 0); + input_set_abs_params(ptr, ABS_X, 0, ptr_size[KPARAM_X], 0, 0); + input_set_abs_params(ptr, ABS_Y, 0, ptr_size[KPARAM_Y], 0, 0); } else { input_set_capability(ptr, EV_REL, REL_X); input_set_capability(ptr, EV_REL, REL_Y); @@ -309,9 +320,6 @@ static void xenkbd_disconnect_backend(struct xenkbd_info *info) static void xenkbd_backend_changed(struct xenbus_device *dev, enum xenbus_state backend_state) { - struct xenkbd_info *info = dev_get_drvdata(&dev->dev); - int ret, val; - switch (backend_state) { case XenbusStateInitialising: case XenbusStateInitialised: @@ -321,15 +329,6 @@ static void xenkbd_backend_changed(struct xenbus_device *dev, break; case XenbusStateInitWait: -InitWait: - if (xenbus_read_unsigned(info->xbdev->otherend, - "feature-abs-pointer", 0)) { - ret = xenbus_write(XBT_NIL, info->xbdev->nodename, - "request-abs-pointer", "1"); - if (ret) - pr_warning("xenkbd: can't request abs-pointer"); - } - xenbus_switch_state(dev, XenbusStateConnected); break; @@ -340,17 +339,7 @@ InitWait: * get Connected twice here. */ if (dev->state != XenbusStateConnected) - goto InitWait; /* no InitWait seen yet, fudge it */ - - /* Set input abs params to match backend screen res */ - if (xenbus_scanf(XBT_NIL, info->xbdev->otherend, - "width", "%d", &val) > 0) - input_set_abs_params(info->ptr, ABS_X, 0, val, 0, 0); - - if (xenbus_scanf(XBT_NIL, info->xbdev->otherend, - "height", "%d", &val) > 0) - input_set_abs_params(info->ptr, ABS_Y, 0, val, 0, 0); - + xenbus_switch_state(dev, XenbusStateConnected); break; case XenbusStateClosed: diff --git a/drivers/input/misc/yealink.h b/drivers/input/misc/yealink.h index 1e0f52397010..934c247f8a0f 100644 --- a/drivers/input/misc/yealink.h +++ b/drivers/input/misc/yealink.h @@ -28,7 +28,7 @@ struct yld_ctl_packet { u8 cmd; /* command code, see below */ u8 size; /* 1-11, size of used data bytes. */ - u16 offset; /* internal packet offset */ + __be16 offset; /* internal packet offset */ u8 data[11]; s8 sum; /* negative sum of 15 preceding bytes */ } __attribute__ ((packed)); diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 096abb4ad5cd..89ebb8f39fee 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -78,6 +78,18 @@ config MOUSE_PS2_SYNAPTICS If unsure, say Y. +config MOUSE_PS2_SYNAPTICS_SMBUS + bool "Synaptics PS/2 SMbus companion" if EXPERT + default y + depends on MOUSE_PS2 + depends on I2C=y || I2C=MOUSE_PS2 + select MOUSE_PS2_SMBUS + help + Say Y here if you have a Synaptics RMI4 touchpad connected to + to an SMBus, but enumerated through PS/2. + + If unsure, say Y. + config MOUSE_PS2_CYPRESS bool "Cypress PS/2 mouse protocol extension" if EXPERT default y @@ -171,6 +183,10 @@ config MOUSE_PS2_VMMOUSE If unsure, say N. +config MOUSE_PS2_SMBUS + bool + depends on MOUSE_PS2 + config MOUSE_SERIAL tristate "Serial mouse" select SERIO diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile index 6168b134937b..56bf0ad877c6 100644 --- a/drivers/input/mouse/Makefile +++ b/drivers/input/mouse/Makefile @@ -39,6 +39,8 @@ psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT) += touchkit_ps2.o psmouse-$(CONFIG_MOUSE_PS2_CYPRESS) += cypress_ps2.o psmouse-$(CONFIG_MOUSE_PS2_VMMOUSE) += vmmouse.o +psmouse-$(CONFIG_MOUSE_PS2_SMBUS) += psmouse-smbus.o + elan_i2c-objs := elan_i2c_core.o elan_i2c-$(CONFIG_MOUSE_ELAN_I2C_I2C) += elan_i2c_i2c.o elan_i2c-$(CONFIG_MOUSE_ELAN_I2C_SMBUS) += elan_i2c_smbus.o diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index f210e19ddba6..262d1057c1da 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -106,39 +106,36 @@ static const struct alps_nibble_commands alps_v6_nibble_commands[] = { #define ALPS_DUALPOINT_WITH_PRESSURE 0x400 /* device can report trackpoint pressure */ static const struct alps_model_info alps_model_data[] = { - { { 0x32, 0x02, 0x14 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } }, /* Toshiba Salellite Pro M10 */ - { { 0x33, 0x02, 0x0a }, 0x00, { ALPS_PROTO_V1, 0x88, 0xf8, 0 } }, /* UMAX-530T */ - { { 0x53, 0x02, 0x0a }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } }, - { { 0x53, 0x02, 0x14 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } }, - { { 0x60, 0x03, 0xc8 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } }, /* HP ze1115 */ - { { 0x63, 0x02, 0x0a }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } }, - { { 0x63, 0x02, 0x14 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } }, - { { 0x63, 0x02, 0x28 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 } }, /* Fujitsu Siemens S6010 */ - { { 0x63, 0x02, 0x3c }, 0x00, { ALPS_PROTO_V2, 0x8f, 0x8f, ALPS_WHEEL } }, /* Toshiba Satellite S2400-103 */ - { { 0x63, 0x02, 0x50 }, 0x00, { ALPS_PROTO_V2, 0xef, 0xef, ALPS_FW_BK_1 } }, /* NEC Versa L320 */ - { { 0x63, 0x02, 0x64 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } }, - { { 0x63, 0x03, 0xc8 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } }, /* Dell Latitude D800 */ - { { 0x73, 0x00, 0x0a }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_DUALPOINT } }, /* ThinkPad R61 8918-5QG */ - { { 0x73, 0x02, 0x0a }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } }, - { { 0x73, 0x02, 0x14 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 } }, /* Ahtec Laptop */ - /* * XXX This entry is suspicious. First byte has zero lower nibble, * which is what a normal mouse would report. Also, the value 0x0e * isn't valid per PS/2 spec. */ - { { 0x20, 0x02, 0x0e }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } }, - - { { 0x22, 0x02, 0x0a }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } }, - { { 0x22, 0x02, 0x14 }, 0x00, { ALPS_PROTO_V2, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT } }, /* Dell Latitude D600 */ - /* Dell Latitude E5500, E6400, E6500, Precision M4400 */ - { { 0x62, 0x02, 0x14 }, 0x00, { ALPS_PROTO_V2, 0xcf, 0xcf, - ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED } }, - { { 0x73, 0x00, 0x14 }, 0x00, { ALPS_PROTO_V6, 0xff, 0xff, ALPS_DUALPOINT } }, /* Dell XT2 */ - { { 0x73, 0x02, 0x50 }, 0x00, { ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS } }, /* Dell Vostro 1400 */ - { { 0x52, 0x01, 0x14 }, 0x00, { ALPS_PROTO_V2, 0xff, 0xff, + { { 0x20, 0x02, 0x0e }, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } }, + + { { 0x22, 0x02, 0x0a }, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } }, + { { 0x22, 0x02, 0x14 }, { ALPS_PROTO_V2, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT } }, /* Dell Latitude D600 */ + { { 0x32, 0x02, 0x14 }, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } }, /* Toshiba Salellite Pro M10 */ + { { 0x33, 0x02, 0x0a }, { ALPS_PROTO_V1, 0x88, 0xf8, 0 } }, /* UMAX-530T */ + { { 0x52, 0x01, 0x14 }, { ALPS_PROTO_V2, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED } }, /* Toshiba Tecra A11-11L */ - { { 0x73, 0x02, 0x64 }, 0x8a, { ALPS_PROTO_V4, 0x8f, 0x8f, 0 } }, + { { 0x53, 0x02, 0x0a }, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } }, + { { 0x53, 0x02, 0x14 }, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } }, + { { 0x60, 0x03, 0xc8 }, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } }, /* HP ze1115 */ + { { 0x62, 0x02, 0x14 }, { ALPS_PROTO_V2, 0xcf, 0xcf, + ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED } }, /* Dell Latitude E5500, E6400, E6500, Precision M4400 */ + { { 0x63, 0x02, 0x0a }, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } }, + { { 0x63, 0x02, 0x14 }, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } }, + { { 0x63, 0x02, 0x28 }, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 } }, /* Fujitsu Siemens S6010 */ + { { 0x63, 0x02, 0x3c }, { ALPS_PROTO_V2, 0x8f, 0x8f, ALPS_WHEEL } }, /* Toshiba Satellite S2400-103 */ + { { 0x63, 0x02, 0x50 }, { ALPS_PROTO_V2, 0xef, 0xef, ALPS_FW_BK_1 } }, /* NEC Versa L320 */ + { { 0x63, 0x02, 0x64 }, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } }, + { { 0x63, 0x03, 0xc8 }, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } }, /* Dell Latitude D800 */ + { { 0x73, 0x00, 0x0a }, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_DUALPOINT } }, /* ThinkPad R61 8918-5QG */ + { { 0x73, 0x00, 0x14 }, { ALPS_PROTO_V6, 0xff, 0xff, ALPS_DUALPOINT } }, /* Dell XT2 */ + { { 0x73, 0x02, 0x0a }, { ALPS_PROTO_V2, 0xf8, 0xf8, 0 } }, + { { 0x73, 0x02, 0x14 }, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 } }, /* Ahtec Laptop */ + { { 0x73, 0x02, 0x50 }, { ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS } }, /* Dell Vostro 1400 */ }; static const struct alps_protocol_info alps_v3_protocol_data = { @@ -149,6 +146,10 @@ static const struct alps_protocol_info alps_v3_rushmore_data = { ALPS_PROTO_V3_RUSHMORE, 0x8f, 0x8f, ALPS_DUALPOINT }; +static const struct alps_protocol_info alps_v4_protocol_data = { + ALPS_PROTO_V4, 0x8f, 0x8f, 0 +}; + static const struct alps_protocol_info alps_v5_protocol_data = { ALPS_PROTO_V5, 0xc8, 0xd8, 0 }; @@ -161,6 +162,10 @@ static const struct alps_protocol_info alps_v8_protocol_data = { ALPS_PROTO_V8, 0x18, 0x18, 0 }; +static const struct alps_protocol_info alps_v9_protocol_data = { + ALPS_PROTO_V9, 0xc8, 0xc8, 0 +}; + /* * Some v2 models report the stick buttons in separate bits */ @@ -2806,12 +2811,8 @@ static const struct alps_protocol_info *alps_match_table(unsigned char *e7, for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) { model = &alps_model_data[i]; - if (!memcmp(e7, model->signature, sizeof(model->signature)) && - (!model->command_mode_resp || - model->command_mode_resp == ec[2])) { - + if (!memcmp(e7, model->signature, sizeof(model->signature))) return &model->protocol_info; - } } return NULL; @@ -2849,7 +2850,10 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv) protocol = alps_match_table(e7, ec); if (!protocol) { - if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0x50 && + if (e7[0] == 0x73 && e7[1] == 0x02 && e7[2] == 0x64 && + ec[2] == 0x8a) { + protocol = &alps_v4_protocol_data; + } else if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0x50 && ec[0] == 0x73 && (ec[1] == 0x01 || ec[1] == 0x02)) { protocol = &alps_v5_protocol_data; } else if (ec[0] == 0x88 && @@ -2863,6 +2867,12 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv) } else if (e7[0] == 0x73 && e7[1] == 0x03 && (e7[2] == 0x14 || e7[2] == 0x28)) { protocol = &alps_v8_protocol_data; + } else if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0xc8) { + protocol = &alps_v9_protocol_data; + psmouse_warn(psmouse, + "Unsupported ALPS V9 touchpad: E7=%3ph, EC=%3ph\n", + e7, ec); + return -EINVAL; } else { psmouse_dbg(psmouse, "Likely not an ALPS touchpad: E7=%3ph, EC=%3ph\n", e7, ec); diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h index 4334f2805d93..ed2d6879fa52 100644 --- a/drivers/input/mouse/alps.h +++ b/drivers/input/mouse/alps.h @@ -23,6 +23,7 @@ #define ALPS_PROTO_V6 0x600 #define ALPS_PROTO_V7 0x700 /* t3btl t4s */ #define ALPS_PROTO_V8 0x800 /* SS4btl SS4s */ +#define ALPS_PROTO_V9 0x900 /* ss3btl */ #define MAX_TOUCHES 4 @@ -172,10 +173,6 @@ struct alps_protocol_info { /** * struct alps_model_info - touchpad ID table * @signature: E7 response string to match. - * @command_mode_resp: For V3/V4 touchpads, the final byte of the EC response - * (aka command mode response) identifies the firmware minor version. This - * can be used to distinguish different hardware models which are not - * uniquely identifiable through their E7 responses. * @protocol_info: information about protocol used by the device. * * Many (but not all) ALPS touchpads can be identified by looking at the @@ -184,7 +181,6 @@ struct alps_protocol_info { */ struct alps_model_info { u8 signature[3]; - u8 command_mode_resp; struct alps_protocol_info protocol_info; }; diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index a598b7223cef..f73b47b8c578 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -116,17 +116,6 @@ static DEFINE_MUTEX(psmouse_mutex); static struct workqueue_struct *kpsmoused_wq; -struct psmouse_protocol { - enum psmouse_type type; - bool maxproto; - bool ignore_parity; /* Protocol should ignore parity errors from KBC */ - bool try_passthru; /* Try protocol also on passthrough ports */ - const char *name; - const char *alias; - int (*detect)(struct psmouse *, bool); - int (*init)(struct psmouse *); -}; - static void psmouse_report_standard_buttons(struct input_dev *dev, u8 buttons) { input_report_key(dev, BTN_LEFT, buttons & BIT(0)); @@ -148,7 +137,7 @@ psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse) /* Full packet accumulated, process it */ - switch (psmouse->type) { + switch (psmouse->protocol->type) { case PSMOUSE_IMPS: /* IntelliMouse has scroll wheel */ input_report_rel(dev, REL_WHEEL, -(signed char) packet[3]); @@ -325,7 +314,8 @@ static irqreturn_t psmouse_interrupt(struct serio *serio, goto out; if (unlikely((flags & SERIO_TIMEOUT) || - ((flags & SERIO_PARITY) && !psmouse->ignore_parity))) { + ((flags & SERIO_PARITY) && + !psmouse->protocol->ignore_parity))) { if (psmouse->state == PSMOUSE_ACTIVATED) psmouse_warn(psmouse, @@ -372,7 +362,7 @@ static irqreturn_t psmouse_interrupt(struct serio *serio, } if (psmouse->packet[1] == PSMOUSE_RET_ID || - (psmouse->type == PSMOUSE_HGPK && + (psmouse->protocol->type == PSMOUSE_HGPK && psmouse->packet[1] == PSMOUSE_RET_BAT)) { __psmouse_set_state(psmouse, PSMOUSE_IGNORE); serio_reconnect(serio); @@ -783,7 +773,7 @@ static const struct psmouse_protocol psmouse_protocols[] = { .name = "SynPS/2", .alias = "synaptics", .detect = synaptics_detect, - .init = synaptics_init, + .init = synaptics_init_absolute, }, { .type = PSMOUSE_SYNAPTICS_RELATIVE, @@ -793,6 +783,16 @@ static const struct psmouse_protocol psmouse_protocols[] = { .init = synaptics_init_relative, }, #endif +#ifdef CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS + { + .type = PSMOUSE_SYNAPTICS_SMBUS, + .name = "SynSMBus", + .alias = "synaptics-smbus", + .detect = synaptics_detect, + .init = synaptics_init_smbus, + .smbus_companion = true, + }, +#endif #ifdef CONFIG_MOUSE_PS2_ALPS { .type = PSMOUSE_ALPS, @@ -959,6 +959,8 @@ static void psmouse_apply_defaults(struct psmouse *psmouse) __set_bit(INPUT_PROP_POINTER, input_dev->propbit); + psmouse->protocol = &psmouse_protocols[0]; + psmouse->set_rate = psmouse_set_rate; psmouse->set_resolution = psmouse_set_resolution; psmouse->set_scale = psmouse_set_scale; @@ -966,6 +968,7 @@ static void psmouse_apply_defaults(struct psmouse *psmouse) psmouse->protocol_handler = psmouse_process_byte; psmouse->pktsize = 3; psmouse->reconnect = NULL; + psmouse->fast_reconnect = NULL; psmouse->disconnect = NULL; psmouse->cleanup = NULL; psmouse->pt_activate = NULL; @@ -1018,6 +1021,7 @@ static int psmouse_extensions(struct psmouse *psmouse, unsigned int max_proto, bool set_properties) { bool synaptics_hardware = false; + int ret; /* * Always check for focaltech, this is safe as it uses pnp-id @@ -1080,9 +1084,14 @@ static int psmouse_extensions(struct psmouse *psmouse, * enabled first, since we try detecting Synaptics * even when protocol is disabled. */ - if (IS_ENABLED(CONFIG_MOUSE_PS2_SYNAPTICS) && - (!set_properties || synaptics_init(psmouse) == 0)) { - return PSMOUSE_SYNAPTICS; + if (IS_ENABLED(CONFIG_MOUSE_PS2_SYNAPTICS) || + IS_ENABLED(CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS)) { + if (!set_properties) + return PSMOUSE_SYNAPTICS; + + ret = synaptics_init(psmouse); + if (ret >= 0) + return ret; } /* @@ -1431,9 +1440,8 @@ static void psmouse_cleanup(struct serio *serio) */ static void psmouse_disconnect(struct serio *serio) { - struct psmouse *psmouse, *parent = NULL; - - psmouse = serio_get_drvdata(serio); + struct psmouse *psmouse = serio_get_drvdata(serio); + struct psmouse *parent = NULL; sysfs_remove_group(&serio->dev.kobj, &psmouse_attribute_group); @@ -1461,7 +1469,10 @@ static void psmouse_disconnect(struct serio *serio) serio_close(serio); serio_set_drvdata(serio, NULL); - input_unregister_device(psmouse->dev); + + if (psmouse->dev) + input_unregister_device(psmouse->dev); + kfree(psmouse); if (parent) @@ -1475,6 +1486,7 @@ static int psmouse_switch_protocol(struct psmouse *psmouse, { const struct psmouse_protocol *selected_proto; struct input_dev *input_dev = psmouse->dev; + enum psmouse_type type; input_dev->dev.parent = &psmouse->ps2dev.serio->dev; @@ -1487,15 +1499,13 @@ static int psmouse_switch_protocol(struct psmouse *psmouse, if (proto->init && proto->init(psmouse) < 0) return -1; - psmouse->type = proto->type; selected_proto = proto; } else { - psmouse->type = psmouse_extensions(psmouse, - psmouse_max_proto, true); - selected_proto = psmouse_protocol_by_type(psmouse->type); + type = psmouse_extensions(psmouse, psmouse_max_proto, true); + selected_proto = psmouse_protocol_by_type(type); } - psmouse->ignore_parity = selected_proto->ignore_parity; + psmouse->protocol = selected_proto; /* * If mouse's packet size is 3 there is no point in polling the @@ -1521,7 +1531,7 @@ static int psmouse_switch_protocol(struct psmouse *psmouse, input_dev->phys = psmouse->phys; input_dev->id.bustype = BUS_I8042; input_dev->id.vendor = 0x0002; - input_dev->id.product = psmouse->type; + input_dev->id.product = psmouse->protocol->type; input_dev->id.version = psmouse->model; return 0; @@ -1583,12 +1593,18 @@ static int psmouse_connect(struct serio *serio, struct serio_driver *drv) psmouse_switch_protocol(psmouse, NULL); - psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); - psmouse_initialize(psmouse); + if (!psmouse->protocol->smbus_companion) { + psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); + psmouse_initialize(psmouse); - error = input_register_device(psmouse->dev); - if (error) - goto err_protocol_disconnect; + error = input_register_device(input_dev); + if (error) + goto err_protocol_disconnect; + } else { + /* Smbus companion will be reporting events, not us. */ + input_free_device(input_dev); + psmouse->dev = input_dev = NULL; + } if (parent && parent->pt_activate) parent->pt_activate(parent); @@ -1597,7 +1613,12 @@ static int psmouse_connect(struct serio *serio, struct serio_driver *drv) if (error) goto err_pt_deactivate; - psmouse_activate(psmouse); + /* + * PS/2 devices having SMBus companions should stay disabled + * on PS/2 side, in order to have SMBus part operable. + */ + if (!psmouse->protocol->smbus_companion) + psmouse_activate(psmouse); out: /* If this is a pass-through port the parent needs to be re-activated */ @@ -1610,8 +1631,10 @@ static int psmouse_connect(struct serio *serio, struct serio_driver *drv) err_pt_deactivate: if (parent && parent->pt_deactivate) parent->pt_deactivate(parent); - input_unregister_device(psmouse->dev); - input_dev = NULL; /* so we don't try to free it below */ + if (input_dev) { + input_unregister_device(input_dev); + input_dev = NULL; /* so we don't try to free it below */ + } err_protocol_disconnect: if (psmouse->disconnect) psmouse->disconnect(psmouse); @@ -1628,15 +1651,26 @@ static int psmouse_connect(struct serio *serio, struct serio_driver *drv) goto out; } -static int psmouse_reconnect(struct serio *serio) +static int __psmouse_reconnect(struct serio *serio, bool fast_reconnect) { struct psmouse *psmouse = serio_get_drvdata(serio); struct psmouse *parent = NULL; - unsigned char type; + int (*reconnect_handler)(struct psmouse *); + enum psmouse_type type; int rc = -1; mutex_lock(&psmouse_mutex); + if (fast_reconnect) { + reconnect_handler = psmouse->fast_reconnect; + if (!reconnect_handler) { + rc = -ENOENT; + goto out_unlock; + } + } else { + reconnect_handler = psmouse->reconnect; + } + if (serio->parent && serio->id.type == SERIO_PS_PSTHRU) { parent = serio_get_drvdata(serio->parent); psmouse_deactivate(parent); @@ -1644,8 +1678,8 @@ static int psmouse_reconnect(struct serio *serio) psmouse_set_state(psmouse, PSMOUSE_INITIALIZING); - if (psmouse->reconnect) { - if (psmouse->reconnect(psmouse)) + if (reconnect_handler) { + if (reconnect_handler(psmouse)) goto out; } else { psmouse_reset(psmouse); @@ -1654,7 +1688,7 @@ static int psmouse_reconnect(struct serio *serio) goto out; type = psmouse_extensions(psmouse, psmouse_max_proto, false); - if (psmouse->type != type) + if (psmouse->protocol->type != type) goto out; } @@ -1662,14 +1696,21 @@ static int psmouse_reconnect(struct serio *serio) * OK, the device type (and capabilities) match the old one, * we can continue using it, complete initialization */ - psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); - - psmouse_initialize(psmouse); + if (!psmouse->protocol->smbus_companion) { + psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); + psmouse_initialize(psmouse); + } if (parent && parent->pt_activate) parent->pt_activate(parent); - psmouse_activate(psmouse); + /* + * PS/2 devices having SMBus companions should stay disabled + * on PS/2 side, in order to have SMBus part operable. + */ + if (!psmouse->protocol->smbus_companion) + psmouse_activate(psmouse); + rc = 0; out: @@ -1677,10 +1718,21 @@ out: if (parent) psmouse_activate(parent); +out_unlock: mutex_unlock(&psmouse_mutex); return rc; } +static int psmouse_reconnect(struct serio *serio) +{ + return __psmouse_reconnect(serio, false); +} + +static int psmouse_fast_reconnect(struct serio *serio) +{ + return __psmouse_reconnect(serio, true); +} + static struct serio_device_id psmouse_serio_ids[] = { { .type = SERIO_8042, @@ -1708,6 +1760,7 @@ static struct serio_driver psmouse_drv = { .interrupt = psmouse_interrupt, .connect = psmouse_connect, .reconnect = psmouse_reconnect, + .fast_reconnect = psmouse_fast_reconnect, .disconnect = psmouse_disconnect, .cleanup = psmouse_cleanup, }; @@ -1717,9 +1770,11 @@ ssize_t psmouse_attr_show_helper(struct device *dev, struct device_attribute *de { struct serio *serio = to_serio_port(dev); struct psmouse_attribute *attr = to_psmouse_attr(devattr); - struct psmouse *psmouse; + struct psmouse *psmouse = serio_get_drvdata(serio); - psmouse = serio_get_drvdata(serio); + if (psmouse->protocol->smbus_companion && + devattr != &psmouse_attr_protocol.dattr) + return -ENOENT; return attr->show(psmouse, attr->data, buf); } @@ -1738,6 +1793,12 @@ ssize_t psmouse_attr_set_helper(struct device *dev, struct device_attribute *dev psmouse = serio_get_drvdata(serio); + if (psmouse->protocol->smbus_companion && + devattr != &psmouse_attr_protocol.dattr) { + retval = -ENOENT; + goto out_unlock; + } + if (attr->protect) { if (psmouse->state == PSMOUSE_IGNORE) { retval = -ENODEV; @@ -1749,13 +1810,14 @@ ssize_t psmouse_attr_set_helper(struct device *dev, struct device_attribute *dev psmouse_deactivate(parent); } - psmouse_deactivate(psmouse); + if (!psmouse->protocol->smbus_companion) + psmouse_deactivate(psmouse); } retval = attr->set(psmouse, attr->data, buf, count); if (attr->protect) { - if (retval != -ENODEV) + if (retval != -ENODEV && !psmouse->protocol->smbus_companion) psmouse_activate(psmouse); if (parent) @@ -1792,7 +1854,7 @@ static ssize_t psmouse_set_int_attr(struct psmouse *psmouse, void *offset, const static ssize_t psmouse_attr_show_protocol(struct psmouse *psmouse, void *data, char *buf) { - return sprintf(buf, "%s\n", psmouse_protocol_by_type(psmouse->type)->name); + return sprintf(buf, "%s\n", psmouse->protocol->name); } static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, const char *buf, size_t count) @@ -1808,7 +1870,7 @@ static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, co if (!proto) return -EINVAL; - if (psmouse->type == proto->type) + if (psmouse->protocol == proto) return count; new_dev = input_allocate_device(); @@ -1832,7 +1894,7 @@ static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, co return -ENODEV; } - if (psmouse->type == proto->type) { + if (psmouse->protocol == proto) { input_free_device(new_dev); return count; /* switched by other thread */ } @@ -1845,7 +1907,7 @@ static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, co } old_dev = psmouse->dev; - old_proto = psmouse_protocol_by_type(psmouse->type); + old_proto = psmouse->protocol; if (psmouse->disconnect) psmouse->disconnect(psmouse); @@ -1864,23 +1926,29 @@ static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, co psmouse_initialize(psmouse); psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); - error = input_register_device(psmouse->dev); - if (error) { - if (psmouse->disconnect) - psmouse->disconnect(psmouse); + if (psmouse->protocol->smbus_companion) { + input_free_device(psmouse->dev); + psmouse->dev = NULL; + } else { + error = input_register_device(psmouse->dev); + if (error) { + if (psmouse->disconnect) + psmouse->disconnect(psmouse); - psmouse_set_state(psmouse, PSMOUSE_IGNORE); - input_free_device(new_dev); - psmouse->dev = old_dev; - psmouse_set_state(psmouse, PSMOUSE_INITIALIZING); - psmouse_switch_protocol(psmouse, old_proto); - psmouse_initialize(psmouse); - psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); + psmouse_set_state(psmouse, PSMOUSE_IGNORE); + input_free_device(new_dev); + psmouse->dev = old_dev; + psmouse_set_state(psmouse, PSMOUSE_INITIALIZING); + psmouse_switch_protocol(psmouse, old_proto); + psmouse_initialize(psmouse); + psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); - return error; + return error; + } } - input_unregister_device(old_dev); + if (old_dev) + input_unregister_device(old_dev); if (parent && parent->pt_activate) parent->pt_activate(parent); @@ -1947,16 +2015,27 @@ static int __init psmouse_init(void) synaptics_module_init(); hgpk_module_init(); + err = psmouse_smbus_module_init(); + if (err) + return err; + kpsmoused_wq = alloc_ordered_workqueue("kpsmoused", 0); if (!kpsmoused_wq) { pr_err("failed to create kpsmoused workqueue\n"); - return -ENOMEM; + err = -ENOMEM; + goto err_smbus_exit; } err = serio_register_driver(&psmouse_drv); if (err) - destroy_workqueue(kpsmoused_wq); + goto err_destroy_wq; + + return 0; +err_destroy_wq: + destroy_workqueue(kpsmoused_wq); +err_smbus_exit: + psmouse_smbus_module_exit(); return err; } @@ -1964,6 +2043,7 @@ static void __exit psmouse_exit(void) { serio_unregister_driver(&psmouse_drv); destroy_workqueue(kpsmoused_wq); + psmouse_smbus_module_exit(); } module_init(psmouse_init); diff --git a/drivers/input/mouse/psmouse-smbus.c b/drivers/input/mouse/psmouse-smbus.c new file mode 100644 index 000000000000..c7ac24d119c1 --- /dev/null +++ b/drivers/input/mouse/psmouse-smbus.c @@ -0,0 +1,302 @@ +/* + * Copyright (c) 2017 Red Hat, Inc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/libps2.h> +#include <linux/i2c.h> +#include <linux/serio.h> +#include <linux/slab.h> +#include <linux/workqueue.h> +#include "psmouse.h" + +struct psmouse_smbus_dev { + struct i2c_board_info board; + struct psmouse *psmouse; + struct i2c_client *client; + struct list_head node; + bool dead; +}; + +static LIST_HEAD(psmouse_smbus_list); +static DEFINE_MUTEX(psmouse_smbus_mutex); + +static void psmouse_smbus_check_adapter(struct i2c_adapter *adapter) +{ + struct psmouse_smbus_dev *smbdev; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_HOST_NOTIFY)) + return; + + mutex_lock(&psmouse_smbus_mutex); + + list_for_each_entry(smbdev, &psmouse_smbus_list, node) { + if (smbdev->dead) + continue; + + if (smbdev->client) + continue; + + /* + * Here would be a good place to check if device is actually + * present, but it seems that SMBus will not respond unless we + * fully reset PS/2 connection. So cross our fingers, and try + * to switch over, hopefully our system will not have too many + * "host notify" I2C adapters. + */ + psmouse_dbg(smbdev->psmouse, + "SMBus candidate adapter appeared, triggering rescan\n"); + serio_rescan(smbdev->psmouse->ps2dev.serio); + } + + mutex_unlock(&psmouse_smbus_mutex); +} + +static void psmouse_smbus_detach_i2c_client(struct i2c_client *client) +{ + struct psmouse_smbus_dev *smbdev, *tmp; + + mutex_lock(&psmouse_smbus_mutex); + + list_for_each_entry_safe(smbdev, tmp, &psmouse_smbus_list, node) { + if (smbdev->client != client) + continue; + + kfree(client->dev.platform_data); + client->dev.platform_data = NULL; + + if (!smbdev->dead) { + psmouse_dbg(smbdev->psmouse, + "Marking SMBus companion %s as gone\n", + dev_name(&smbdev->client->dev)); + smbdev->dead = true; + serio_rescan(smbdev->psmouse->ps2dev.serio); + } else { + list_del(&smbdev->node); + kfree(smbdev); + } + } + + mutex_unlock(&psmouse_smbus_mutex); +} + +static int psmouse_smbus_notifier_call(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct device *dev = data; + + switch (action) { + case BUS_NOTIFY_ADD_DEVICE: + if (dev->type == &i2c_adapter_type) + psmouse_smbus_check_adapter(to_i2c_adapter(dev)); + break; + + case BUS_NOTIFY_REMOVED_DEVICE: + if (dev->type == &i2c_client_type) + psmouse_smbus_detach_i2c_client(to_i2c_client(dev)); + break; + } + + return 0; +} + +static struct notifier_block psmouse_smbus_notifier = { + .notifier_call = psmouse_smbus_notifier_call, +}; + +static psmouse_ret_t psmouse_smbus_process_byte(struct psmouse *psmouse) +{ + return PSMOUSE_FULL_PACKET; +} + +static int psmouse_smbus_reconnect(struct psmouse *psmouse) +{ + psmouse_deactivate(psmouse); + + return 0; +} + +struct psmouse_smbus_removal_work { + struct work_struct work; + struct i2c_client *client; +}; + +static void psmouse_smbus_remove_i2c_device(struct work_struct *work) +{ + struct psmouse_smbus_removal_work *rwork = + container_of(work, struct psmouse_smbus_removal_work, work); + + dev_dbg(&rwork->client->dev, "destroying SMBus companion device\n"); + i2c_unregister_device(rwork->client); + + kfree(rwork); +} + +/* + * This schedules removal of SMBus companion device. We have to do + * it in a separate tread to avoid deadlocking on psmouse_mutex in + * case the device has a trackstick (which is also driven by psmouse). + * + * Note that this may be racing with i2c adapter removal, but we + * can't do anything about that: i2c automatically destroys clients + * attached to an adapter that is being removed. This has to be + * fixed in i2c core. + */ +static void psmouse_smbus_schedule_remove(struct i2c_client *client) +{ + struct psmouse_smbus_removal_work *rwork; + + rwork = kzalloc(sizeof(*rwork), GFP_KERNEL); + if (rwork) { + INIT_WORK(&rwork->work, psmouse_smbus_remove_i2c_device); + rwork->client = client; + + schedule_work(&rwork->work); + } +} + +static void psmouse_smbus_disconnect(struct psmouse *psmouse) +{ + struct psmouse_smbus_dev *smbdev = psmouse->private; + + mutex_lock(&psmouse_smbus_mutex); + + if (smbdev->dead) { + list_del(&smbdev->node); + kfree(smbdev); + } else { + smbdev->dead = true; + psmouse_dbg(smbdev->psmouse, + "posting removal request for SMBus companion %s\n", + dev_name(&smbdev->client->dev)); + psmouse_smbus_schedule_remove(smbdev->client); + } + + mutex_unlock(&psmouse_smbus_mutex); + + psmouse->private = NULL; +} + +static int psmouse_smbus_create_companion(struct device *dev, void *data) +{ + struct psmouse_smbus_dev *smbdev = data; + unsigned short addr_list[] = { smbdev->board.addr, I2C_CLIENT_END }; + struct i2c_adapter *adapter; + + adapter = i2c_verify_adapter(dev); + if (!adapter) + return 0; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_HOST_NOTIFY)) + return 0; + + smbdev->client = i2c_new_probed_device(adapter, &smbdev->board, + addr_list, NULL); + if (!smbdev->client) + return 0; + + /* We have our(?) device, stop iterating i2c bus. */ + return 1; +} + +void psmouse_smbus_cleanup(struct psmouse *psmouse) +{ + struct psmouse_smbus_dev *smbdev, *tmp; + + mutex_lock(&psmouse_smbus_mutex); + + list_for_each_entry_safe(smbdev, tmp, &psmouse_smbus_list, node) { + if (psmouse == smbdev->psmouse) { + list_del(&smbdev->node); + kfree(smbdev); + } + } + + mutex_unlock(&psmouse_smbus_mutex); +} + +int psmouse_smbus_init(struct psmouse *psmouse, + const struct i2c_board_info *board, + const void *pdata, size_t pdata_size, + bool leave_breadcrumbs) +{ + struct psmouse_smbus_dev *smbdev; + int error; + + smbdev = kzalloc(sizeof(*smbdev), GFP_KERNEL); + if (!smbdev) + return -ENOMEM; + + smbdev->psmouse = psmouse; + smbdev->board = *board; + + smbdev->board.platform_data = kmemdup(pdata, pdata_size, GFP_KERNEL); + if (!smbdev->board.platform_data) { + kfree(smbdev); + return -ENOMEM; + } + + psmouse->private = smbdev; + psmouse->protocol_handler = psmouse_smbus_process_byte; + psmouse->reconnect = psmouse_smbus_reconnect; + psmouse->fast_reconnect = psmouse_smbus_reconnect; + psmouse->disconnect = psmouse_smbus_disconnect; + psmouse->resync_time = 0; + + psmouse_deactivate(psmouse); + + mutex_lock(&psmouse_smbus_mutex); + list_add_tail(&smbdev->node, &psmouse_smbus_list); + mutex_unlock(&psmouse_smbus_mutex); + + /* Bind to already existing adapters right away */ + error = i2c_for_each_dev(smbdev, psmouse_smbus_create_companion); + + if (smbdev->client) { + /* We have our companion device */ + return 0; + } + + /* + * If we did not create i2c device we will not need platform + * data even if we are leaving breadcrumbs. + */ + kfree(smbdev->board.platform_data); + smbdev->board.platform_data = NULL; + + if (error < 0 || !leave_breadcrumbs) { + mutex_lock(&psmouse_smbus_mutex); + list_del(&smbdev->node); + mutex_unlock(&psmouse_smbus_mutex); + + kfree(smbdev); + } + + return error < 0 ? error : -EAGAIN; +} + +int __init psmouse_smbus_module_init(void) +{ + int error; + + error = bus_register_notifier(&i2c_bus_type, &psmouse_smbus_notifier); + if (error) { + pr_err("failed to register i2c bus notifier: %d\n", error); + return error; + } + + return 0; +} + +void psmouse_smbus_module_exit(void) +{ + bus_unregister_notifier(&i2c_bus_type, &psmouse_smbus_notifier); + flush_scheduled_work(); +} diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h index 8c83b8e2505c..38855e425f01 100644 --- a/drivers/input/mouse/psmouse.h +++ b/drivers/input/mouse/psmouse.h @@ -44,21 +44,60 @@ enum psmouse_scale { PSMOUSE_SCALE21 }; +enum psmouse_type { + PSMOUSE_NONE, + PSMOUSE_PS2, + PSMOUSE_PS2PP, + PSMOUSE_THINKPS, + PSMOUSE_GENPS, + PSMOUSE_IMPS, + PSMOUSE_IMEX, + PSMOUSE_SYNAPTICS, + PSMOUSE_ALPS, + PSMOUSE_LIFEBOOK, + PSMOUSE_TRACKPOINT, + PSMOUSE_TOUCHKIT_PS2, + PSMOUSE_CORTRON, + PSMOUSE_HGPK, + PSMOUSE_ELANTECH, + PSMOUSE_FSP, + PSMOUSE_SYNAPTICS_RELATIVE, + PSMOUSE_CYPRESS, + PSMOUSE_FOCALTECH, + PSMOUSE_VMMOUSE, + PSMOUSE_BYD, + PSMOUSE_SYNAPTICS_SMBUS, + PSMOUSE_AUTO /* This one should always be last */ +}; + +struct psmouse; + +struct psmouse_protocol { + enum psmouse_type type; + bool maxproto; + bool ignore_parity; /* Protocol should ignore parity errors from KBC */ + bool try_passthru; /* Try protocol also on passthrough ports */ + bool smbus_companion; /* "Protocol" is a stub, device is on SMBus */ + const char *name; + const char *alias; + int (*detect)(struct psmouse *, bool); + int (*init)(struct psmouse *); +}; + struct psmouse { void *private; struct input_dev *dev; struct ps2dev ps2dev; struct delayed_work resync_work; - char *vendor; - char *name; + const char *vendor; + const char *name; + const struct psmouse_protocol *protocol; unsigned char packet[8]; unsigned char badbyte; unsigned char pktcnt; unsigned char pktsize; - unsigned char type; unsigned char oob_data_type; unsigned char extra_buttons; - bool ignore_parity; bool acks_disable_command; unsigned int model; unsigned long last; @@ -80,6 +119,7 @@ struct psmouse { void (*set_scale)(struct psmouse *psmouse, enum psmouse_scale scale); int (*reconnect)(struct psmouse *psmouse); + int (*fast_reconnect)(struct psmouse *psmouse); void (*disconnect)(struct psmouse *psmouse); void (*cleanup)(struct psmouse *psmouse); int (*poll)(struct psmouse *psmouse); @@ -88,31 +128,6 @@ struct psmouse { void (*pt_deactivate)(struct psmouse *psmouse); }; -enum psmouse_type { - PSMOUSE_NONE, - PSMOUSE_PS2, - PSMOUSE_PS2PP, - PSMOUSE_THINKPS, - PSMOUSE_GENPS, - PSMOUSE_IMPS, - PSMOUSE_IMEX, - PSMOUSE_SYNAPTICS, - PSMOUSE_ALPS, - PSMOUSE_LIFEBOOK, - PSMOUSE_TRACKPOINT, - PSMOUSE_TOUCHKIT_PS2, - PSMOUSE_CORTRON, - PSMOUSE_HGPK, - PSMOUSE_ELANTECH, - PSMOUSE_FSP, - PSMOUSE_SYNAPTICS_RELATIVE, - PSMOUSE_CYPRESS, - PSMOUSE_FOCALTECH, - PSMOUSE_VMMOUSE, - PSMOUSE_BYD, - PSMOUSE_AUTO /* This one should always be last */ -}; - void psmouse_queue_work(struct psmouse *psmouse, struct delayed_work *work, unsigned long delay); int psmouse_sliced_command(struct psmouse *psmouse, unsigned char command); @@ -195,5 +210,34 @@ static struct psmouse_attribute psmouse_attr_##_name = { \ &(psmouse)->ps2dev.serio->dev, \ psmouse_fmt(format), ##__VA_ARGS__) +#ifdef CONFIG_MOUSE_PS2_SMBUS + +int psmouse_smbus_module_init(void); +void psmouse_smbus_module_exit(void); + +struct i2c_board_info; + +int psmouse_smbus_init(struct psmouse *psmouse, + const struct i2c_board_info *board, + const void *pdata, size_t pdata_size, + bool leave_breadcrumbs); +void psmouse_smbus_cleanup(struct psmouse *psmouse); + +#else /* !CONFIG_MOUSE_PS2_SMBUS */ + +static inline int psmouse_smbus_module_init(void) +{ + return 0; +} + +static inline void psmouse_smbus_module_exit(void) +{ +} + +static inline void psmouse_smbus_cleanup(struct psmouse *psmouse) +{ +} + +#endif /* CONFIG_MOUSE_PS2_SMBUS */ #endif /* _PSMOUSE_H */ diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 597ee4b01d9f..131df9d3660f 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -29,6 +29,8 @@ #include <linux/input/mt.h> #include <linux/serio.h> #include <linux/libps2.h> +#include <linux/rmi.h> +#include <linux/i2c.h> #include <linux/slab.h> #include "psmouse.h" #include "synaptics.h" @@ -77,22 +79,27 @@ /* * Set the synaptics touchpad mode byte by special commands */ -static int synaptics_mode_cmd(struct psmouse *psmouse, unsigned char mode) +static int synaptics_mode_cmd(struct psmouse *psmouse, u8 mode) { - unsigned char param[1]; + u8 param[1]; + int error; + + error = psmouse_sliced_command(psmouse, mode); + if (error) + return error; - if (psmouse_sliced_command(psmouse, mode)) - return -1; param[0] = SYN_PS_SET_MODE2; - if (ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_SETRATE)) - return -1; + error = ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_SETRATE); + if (error) + return error; + return 0; } int synaptics_detect(struct psmouse *psmouse, bool set_properties) { struct ps2dev *ps2dev = &psmouse->ps2dev; - unsigned char param[4]; + u8 param[4]; param[0] = 0; @@ -119,59 +126,8 @@ void synaptics_reset(struct psmouse *psmouse) synaptics_mode_cmd(psmouse, 0); } -#ifdef CONFIG_MOUSE_PS2_SYNAPTICS - -static bool cr48_profile_sensor; - -#define ANY_BOARD_ID 0 -struct min_max_quirk { - const char * const *pnp_ids; - struct { - unsigned long int min, max; - } board_id; - int x_min, x_max, y_min, y_max; -}; - -static const struct min_max_quirk min_max_pnpid_table[] = { - { - (const char * const []){"LEN0033", NULL}, - {ANY_BOARD_ID, ANY_BOARD_ID}, - 1024, 5052, 2258, 4832 - }, - { - (const char * const []){"LEN0042", NULL}, - {ANY_BOARD_ID, ANY_BOARD_ID}, - 1232, 5710, 1156, 4696 - }, - { - (const char * const []){"LEN0034", "LEN0036", "LEN0037", - "LEN0039", "LEN2002", "LEN2004", - NULL}, - {ANY_BOARD_ID, 2961}, - 1024, 5112, 2024, 4832 - }, - { - (const char * const []){"LEN2000", NULL}, - {ANY_BOARD_ID, ANY_BOARD_ID}, - 1024, 5113, 2021, 4832 - }, - { - (const char * const []){"LEN2001", NULL}, - {ANY_BOARD_ID, ANY_BOARD_ID}, - 1024, 5022, 2508, 4832 - }, - { - (const char * const []){"LEN2006", NULL}, - {2691, 2691}, - 1024, 5045, 2457, 4832 - }, - { - (const char * const []){"LEN2006", NULL}, - {ANY_BOARD_ID, ANY_BOARD_ID}, - 1264, 5675, 1171, 4688 - }, - { } -}; +#if defined(CONFIG_MOUSE_PS2_SYNAPTICS) || \ + defined(CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS) /* This list has been kindly provided by Synaptics. */ static const char * const topbuttonpad_pnp_ids[] = { @@ -211,101 +167,109 @@ static const char * const topbuttonpad_pnp_ids[] = { NULL }; -/* This list has been kindly provided by Synaptics. */ -static const char * const forcepad_pnp_ids[] = { - "SYN300D", - "SYN3014", +static const char * const smbus_pnp_ids[] = { + /* all of the topbuttonpad_pnp_ids are valid, we just add some extras */ + "LEN0048", /* X1 Carbon 3 */ + "LEN0046", /* X250 */ + "LEN004a", /* W541 */ + "LEN200f", /* T450s */ NULL }; -/***************************************************************************** - * Synaptics communications functions - ****************************************************************************/ - /* - * Synaptics touchpads report the y coordinate from bottom to top, which is - * opposite from what userspace expects. - * This function is used to invert y before reporting. + * Send a command to the synpatics touchpad by special commands */ -static int synaptics_invert_y(int y) +static int synaptics_send_cmd(struct psmouse *psmouse, u8 cmd, u8 *param) { - return YMAX_NOMINAL + YMIN_NOMINAL - y; + int error; + + error = psmouse_sliced_command(psmouse, cmd); + if (error) + return error; + + error = ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO); + if (error) + return error; + + return 0; +} + +static int synaptics_query_int(struct psmouse *psmouse, u8 query_cmd, u32 *val) +{ + int error; + union { + __be32 be_val; + char buf[4]; + } resp = { 0 }; + + error = synaptics_send_cmd(psmouse, query_cmd, resp.buf + 1); + if (error) + return error; + + *val = be32_to_cpu(resp.be_val); + return 0; } /* - * Send a command to the synpatics touchpad by special commands + * Identify Touchpad + * See also the SYN_ID_* macros */ -static int synaptics_send_cmd(struct psmouse *psmouse, unsigned char c, unsigned char *param) +static int synaptics_identify(struct psmouse *psmouse, + struct synaptics_device_info *info) { - if (psmouse_sliced_command(psmouse, c)) - return -1; - if (ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO)) - return -1; - return 0; + int error; + + error = synaptics_query_int(psmouse, SYN_QUE_IDENTIFY, &info->identity); + if (error) + return error; + + return SYN_ID_IS_SYNAPTICS(info->identity) ? 0 : -ENXIO; } /* * Read the model-id bytes from the touchpad * see also SYN_MODEL_* macros */ -static int synaptics_model_id(struct psmouse *psmouse) +static int synaptics_model_id(struct psmouse *psmouse, + struct synaptics_device_info *info) { - struct synaptics_data *priv = psmouse->private; - unsigned char mi[3]; - - if (synaptics_send_cmd(psmouse, SYN_QUE_MODEL, mi)) - return -1; - priv->model_id = (mi[0]<<16) | (mi[1]<<8) | mi[2]; - return 0; + return synaptics_query_int(psmouse, SYN_QUE_MODEL, &info->model_id); } -static int synaptics_more_extended_queries(struct psmouse *psmouse) +/* + * Read the firmware id from the touchpad + */ +static int synaptics_firmware_id(struct psmouse *psmouse, + struct synaptics_device_info *info) { - struct synaptics_data *priv = psmouse->private; - unsigned char buf[3]; - - if (synaptics_send_cmd(psmouse, SYN_QUE_MEXT_CAPAB_10, buf)) - return -1; - - priv->ext_cap_10 = (buf[0]<<16) | (buf[1]<<8) | buf[2]; - - return 0; + return synaptics_query_int(psmouse, SYN_QUE_FIRMWARE_ID, + &info->firmware_id); } /* * Read the board id and the "More Extended Queries" from the touchpad * The board id is encoded in the "QUERY MODES" response */ -static int synaptics_query_modes(struct psmouse *psmouse) +static int synaptics_query_modes(struct psmouse *psmouse, + struct synaptics_device_info *info) { - struct synaptics_data *priv = psmouse->private; - unsigned char bid[3]; + u8 bid[3]; + int error; /* firmwares prior 7.5 have no board_id encoded */ - if (SYN_ID_FULL(priv->identity) < 0x705) + if (SYN_ID_FULL(info->identity) < 0x705) return 0; - if (synaptics_send_cmd(psmouse, SYN_QUE_MODES, bid)) - return -1; - priv->board_id = ((bid[0] & 0xfc) << 6) | bid[1]; - - if (SYN_MEXT_CAP_BIT(bid[0])) - return synaptics_more_extended_queries(psmouse); + error = synaptics_send_cmd(psmouse, SYN_QUE_MODES, bid); + if (error) + return error; - return 0; -} + info->board_id = ((bid[0] & 0xfc) << 6) | bid[1]; -/* - * Read the firmware id from the touchpad - */ -static int synaptics_firmware_id(struct psmouse *psmouse) -{ - struct synaptics_data *priv = psmouse->private; - unsigned char fwid[3]; + if (SYN_MEXT_CAP_BIT(bid[0])) + return synaptics_query_int(psmouse, SYN_QUE_MEXT_CAPAB_10, + &info->ext_cap_10); - if (synaptics_send_cmd(psmouse, SYN_QUE_FIRMWARE_ID, fwid)) - return -1; - priv->firmware_id = (fwid[0] << 16) | (fwid[1] << 8) | fwid[2]; return 0; } @@ -313,139 +277,236 @@ static int synaptics_firmware_id(struct psmouse *psmouse) * Read the capability-bits from the touchpad * see also the SYN_CAP_* macros */ -static int synaptics_capability(struct psmouse *psmouse) +static int synaptics_capability(struct psmouse *psmouse, + struct synaptics_device_info *info) { - struct synaptics_data *priv = psmouse->private; - unsigned char cap[3]; + int error; - if (synaptics_send_cmd(psmouse, SYN_QUE_CAPABILITIES, cap)) - return -1; - priv->capabilities = (cap[0] << 16) | (cap[1] << 8) | cap[2]; - priv->ext_cap = priv->ext_cap_0c = 0; + error = synaptics_query_int(psmouse, SYN_QUE_CAPABILITIES, + &info->capabilities); + if (error) + return error; + + info->ext_cap = info->ext_cap_0c = 0; /* * Older firmwares had submodel ID fixed to 0x47 */ - if (SYN_ID_FULL(priv->identity) < 0x705 && - SYN_CAP_SUBMODEL_ID(priv->capabilities) != 0x47) { - return -1; + if (SYN_ID_FULL(info->identity) < 0x705 && + SYN_CAP_SUBMODEL_ID(info->capabilities) != 0x47) { + return -ENXIO; } /* * Unless capExtended is set the rest of the flags should be ignored */ - if (!SYN_CAP_EXTENDED(priv->capabilities)) - priv->capabilities = 0; + if (!SYN_CAP_EXTENDED(info->capabilities)) + info->capabilities = 0; - if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 1) { - if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB, cap)) { + if (SYN_EXT_CAP_REQUESTS(info->capabilities) >= 1) { + error = synaptics_query_int(psmouse, SYN_QUE_EXT_CAPAB, + &info->ext_cap); + if (error) { psmouse_warn(psmouse, "device claims to have extended capabilities, but I'm not able to read them.\n"); } else { - priv->ext_cap = (cap[0] << 16) | (cap[1] << 8) | cap[2]; - /* * if nExtBtn is greater than 8 it should be considered * invalid and treated as 0 */ - if (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) > 8) - priv->ext_cap &= 0xff0fff; + if (SYN_CAP_MULTI_BUTTON_NO(info->ext_cap) > 8) + info->ext_cap &= ~SYN_CAP_MB_MASK; } } - if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 4) { - if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB_0C, cap)) { + if (SYN_EXT_CAP_REQUESTS(info->capabilities) >= 4) { + error = synaptics_query_int(psmouse, SYN_QUE_EXT_CAPAB_0C, + &info->ext_cap_0c); + if (error) psmouse_warn(psmouse, "device claims to have extended capability 0x0c, but I'm not able to read it.\n"); - } else { - priv->ext_cap_0c = (cap[0] << 16) | (cap[1] << 8) | cap[2]; - } } return 0; } /* - * Identify Touchpad - * See also the SYN_ID_* macros - */ -static int synaptics_identify(struct psmouse *psmouse) -{ - struct synaptics_data *priv = psmouse->private; - unsigned char id[3]; - - if (synaptics_send_cmd(psmouse, SYN_QUE_IDENTIFY, id)) - return -1; - priv->identity = (id[0]<<16) | (id[1]<<8) | id[2]; - if (SYN_ID_IS_SYNAPTICS(priv->identity)) - return 0; - return -1; -} - -/* * Read touchpad resolution and maximum reported coordinates * Resolution is left zero if touchpad does not support the query */ - -static int synaptics_resolution(struct psmouse *psmouse) +static int synaptics_resolution(struct psmouse *psmouse, + struct synaptics_device_info *info) { - struct synaptics_data *priv = psmouse->private; - unsigned char resp[3]; + u8 resp[3]; + int error; - if (SYN_ID_MAJOR(priv->identity) < 4) + if (SYN_ID_MAJOR(info->identity) < 4) return 0; - if (synaptics_send_cmd(psmouse, SYN_QUE_RESOLUTION, resp) == 0) { + error = synaptics_send_cmd(psmouse, SYN_QUE_RESOLUTION, resp); + if (!error) { if (resp[0] != 0 && (resp[1] & 0x80) && resp[2] != 0) { - priv->x_res = resp[0]; /* x resolution in units/mm */ - priv->y_res = resp[2]; /* y resolution in units/mm */ + info->x_res = resp[0]; /* x resolution in units/mm */ + info->y_res = resp[2]; /* y resolution in units/mm */ } } - if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 5 && - SYN_CAP_MAX_DIMENSIONS(priv->ext_cap_0c)) { - if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_MAX_COORDS, resp)) { + if (SYN_EXT_CAP_REQUESTS(info->capabilities) >= 5 && + SYN_CAP_MAX_DIMENSIONS(info->ext_cap_0c)) { + error = synaptics_send_cmd(psmouse, + SYN_QUE_EXT_MAX_COORDS, resp); + if (error) { psmouse_warn(psmouse, "device claims to have max coordinates query, but I'm not able to read it.\n"); } else { - priv->x_max = (resp[0] << 5) | ((resp[1] & 0x0f) << 1); - priv->y_max = (resp[2] << 5) | ((resp[1] & 0xf0) >> 3); + info->x_max = (resp[0] << 5) | ((resp[1] & 0x0f) << 1); + info->y_max = (resp[2] << 5) | ((resp[1] & 0xf0) >> 3); psmouse_info(psmouse, "queried max coordinates: x [..%d], y [..%d]\n", - priv->x_max, priv->y_max); + info->x_max, info->y_max); } } - if (SYN_CAP_MIN_DIMENSIONS(priv->ext_cap_0c) && - (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 7 || + if (SYN_CAP_MIN_DIMENSIONS(info->ext_cap_0c) && + (SYN_EXT_CAP_REQUESTS(info->capabilities) >= 7 || /* * Firmware v8.1 does not report proper number of extended * capabilities, but has been proven to report correct min * coordinates. */ - SYN_ID_FULL(priv->identity) == 0x801)) { - if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_MIN_COORDS, resp)) { + SYN_ID_FULL(info->identity) == 0x801)) { + error = synaptics_send_cmd(psmouse, + SYN_QUE_EXT_MIN_COORDS, resp); + if (error) { psmouse_warn(psmouse, "device claims to have min coordinates query, but I'm not able to read it.\n"); } else { - priv->x_min = (resp[0] << 5) | ((resp[1] & 0x0f) << 1); - priv->y_min = (resp[2] << 5) | ((resp[1] & 0xf0) >> 3); + info->x_min = (resp[0] << 5) | ((resp[1] & 0x0f) << 1); + info->y_min = (resp[2] << 5) | ((resp[1] & 0xf0) >> 3); psmouse_info(psmouse, "queried min coordinates: x [%d..], y [%d..]\n", - priv->x_min, priv->y_min); + info->x_min, info->y_min); } } return 0; } +static int synaptics_query_hardware(struct psmouse *psmouse, + struct synaptics_device_info *info) +{ + int error; + + error = synaptics_identify(psmouse, info); + if (error) + return error; + + error = synaptics_model_id(psmouse, info); + if (error) + return error; + + error = synaptics_firmware_id(psmouse, info); + if (error) + return error; + + error = synaptics_query_modes(psmouse, info); + if (error) + return error; + + error = synaptics_capability(psmouse, info); + if (error) + return error; + + error = synaptics_resolution(psmouse, info); + if (error) + return error; + + return 0; +} + +#endif /* CONFIG_MOUSE_PS2_SYNAPTICS || CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS */ + +#ifdef CONFIG_MOUSE_PS2_SYNAPTICS + +static bool cr48_profile_sensor; + +#define ANY_BOARD_ID 0 +struct min_max_quirk { + const char * const *pnp_ids; + struct { + u32 min, max; + } board_id; + u32 x_min, x_max, y_min, y_max; +}; + +static const struct min_max_quirk min_max_pnpid_table[] = { + { + (const char * const []){"LEN0033", NULL}, + {ANY_BOARD_ID, ANY_BOARD_ID}, + 1024, 5052, 2258, 4832 + }, + { + (const char * const []){"LEN0042", NULL}, + {ANY_BOARD_ID, ANY_BOARD_ID}, + 1232, 5710, 1156, 4696 + }, + { + (const char * const []){"LEN0034", "LEN0036", "LEN0037", + "LEN0039", "LEN2002", "LEN2004", + NULL}, + {ANY_BOARD_ID, 2961}, + 1024, 5112, 2024, 4832 + }, + { + (const char * const []){"LEN2000", NULL}, + {ANY_BOARD_ID, ANY_BOARD_ID}, + 1024, 5113, 2021, 4832 + }, + { + (const char * const []){"LEN2001", NULL}, + {ANY_BOARD_ID, ANY_BOARD_ID}, + 1024, 5022, 2508, 4832 + }, + { + (const char * const []){"LEN2006", NULL}, + {2691, 2691}, + 1024, 5045, 2457, 4832 + }, + { + (const char * const []){"LEN2006", NULL}, + {ANY_BOARD_ID, ANY_BOARD_ID}, + 1264, 5675, 1171, 4688 + }, + { } +}; + +/* This list has been kindly provided by Synaptics. */ +static const char * const forcepad_pnp_ids[] = { + "SYN300D", + "SYN3014", + NULL +}; + +/***************************************************************************** + * Synaptics communications functions + ****************************************************************************/ + +/* + * Synaptics touchpads report the y coordinate from bottom to top, which is + * opposite from what userspace expects. + * This function is used to invert y before reporting. + */ +static int synaptics_invert_y(int y) +{ + return YMAX_NOMINAL + YMIN_NOMINAL - y; +} + /* * Apply quirk(s) if the hardware matches */ - -static void synaptics_apply_quirks(struct psmouse *psmouse) +static void synaptics_apply_quirks(struct psmouse *psmouse, + struct synaptics_device_info *info) { - struct synaptics_data *priv = psmouse->private; int i; for (i = 0; min_max_pnpid_table[i].pnp_ids; i++) { @@ -454,62 +515,45 @@ static void synaptics_apply_quirks(struct psmouse *psmouse) continue; if (min_max_pnpid_table[i].board_id.min != ANY_BOARD_ID && - priv->board_id < min_max_pnpid_table[i].board_id.min) + info->board_id < min_max_pnpid_table[i].board_id.min) continue; if (min_max_pnpid_table[i].board_id.max != ANY_BOARD_ID && - priv->board_id > min_max_pnpid_table[i].board_id.max) + info->board_id > min_max_pnpid_table[i].board_id.max) continue; - priv->x_min = min_max_pnpid_table[i].x_min; - priv->x_max = min_max_pnpid_table[i].x_max; - priv->y_min = min_max_pnpid_table[i].y_min; - priv->y_max = min_max_pnpid_table[i].y_max; + info->x_min = min_max_pnpid_table[i].x_min; + info->x_max = min_max_pnpid_table[i].x_max; + info->y_min = min_max_pnpid_table[i].y_min; + info->y_max = min_max_pnpid_table[i].y_max; psmouse_info(psmouse, "quirked min/max coordinates: x [%d..%d], y [%d..%d]\n", - priv->x_min, priv->x_max, - priv->y_min, priv->y_max); + info->x_min, info->x_max, + info->y_min, info->y_max); break; } } -static int synaptics_query_hardware(struct psmouse *psmouse) -{ - if (synaptics_identify(psmouse)) - return -1; - if (synaptics_model_id(psmouse)) - return -1; - if (synaptics_firmware_id(psmouse)) - return -1; - if (synaptics_query_modes(psmouse)) - return -1; - if (synaptics_capability(psmouse)) - return -1; - if (synaptics_resolution(psmouse)) - return -1; - - synaptics_apply_quirks(psmouse); - - return 0; -} - static int synaptics_set_advanced_gesture_mode(struct psmouse *psmouse) { - static unsigned char param = 0xc8; + static u8 param = 0xc8; struct synaptics_data *priv = psmouse->private; + int error; - if (!(SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) || - SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c))) + if (!(SYN_CAP_ADV_GESTURE(priv->info.ext_cap_0c) || + SYN_CAP_IMAGE_SENSOR(priv->info.ext_cap_0c))) return 0; - if (psmouse_sliced_command(psmouse, SYN_QUE_MODEL)) - return -1; + error = psmouse_sliced_command(psmouse, SYN_QUE_MODEL); + if (error) + return error; - if (ps2_command(&psmouse->ps2dev, ¶m, PSMOUSE_CMD_SETRATE)) - return -1; + error = ps2_command(&psmouse->ps2dev, ¶m, PSMOUSE_CMD_SETRATE); + if (error) + return error; /* Advanced gesture mode also sends multi finger data */ - priv->capabilities |= BIT(1); + priv->info.capabilities |= BIT(1); return 0; } @@ -517,6 +561,7 @@ static int synaptics_set_advanced_gesture_mode(struct psmouse *psmouse) static int synaptics_set_mode(struct psmouse *psmouse) { struct synaptics_data *priv = psmouse->private; + int error; priv->mode = 0; if (priv->absolute_mode) @@ -525,16 +570,21 @@ static int synaptics_set_mode(struct psmouse *psmouse) priv->mode |= SYN_BIT_DISABLE_GESTURE; if (psmouse->rate >= 80) priv->mode |= SYN_BIT_HIGH_RATE; - if (SYN_CAP_EXTENDED(priv->capabilities)) + if (SYN_CAP_EXTENDED(priv->info.capabilities)) priv->mode |= SYN_BIT_W_MODE; - if (synaptics_mode_cmd(psmouse, priv->mode)) - return -1; + error = synaptics_mode_cmd(psmouse, priv->mode); + if (error) + return error; - if (priv->absolute_mode && - synaptics_set_advanced_gesture_mode(psmouse)) { - psmouse_err(psmouse, "Advanced gesture mode init failed.\n"); - return -1; + if (priv->absolute_mode) { + error = synaptics_set_advanced_gesture_mode(psmouse); + if (error) { + psmouse_err(psmouse, + "Advanced gesture mode init failed: %d\n", + error); + return error; + } } return 0; @@ -558,15 +608,20 @@ static void synaptics_set_rate(struct psmouse *psmouse, unsigned int rate) /***************************************************************************** * Synaptics pass-through PS/2 port support ****************************************************************************/ -static int synaptics_pt_write(struct serio *serio, unsigned char c) +static int synaptics_pt_write(struct serio *serio, u8 c) { struct psmouse *parent = serio_get_drvdata(serio->parent); - char rate_param = SYN_PS_CLIENT_CMD; /* indicates that we want pass-through port */ + u8 rate_param = SYN_PS_CLIENT_CMD; /* indicates that we want pass-through port */ + int error; + + error = psmouse_sliced_command(parent, c); + if (error) + return error; + + error = ps2_command(&parent->ps2dev, &rate_param, PSMOUSE_CMD_SETRATE); + if (error) + return error; - if (psmouse_sliced_command(parent, c)) - return -1; - if (ps2_command(&parent->ps2dev, &rate_param, PSMOUSE_CMD_SETRATE)) - return -1; return 0; } @@ -592,13 +647,12 @@ static void synaptics_pt_stop(struct serio *serio) serio_continue_rx(parent->ps2dev.serio); } -static int synaptics_is_pt_packet(unsigned char *buf) +static int synaptics_is_pt_packet(u8 *buf) { return (buf[0] & 0xFC) == 0x84 && (buf[3] & 0xCC) == 0xC4; } -static void synaptics_pass_pt_packet(struct serio *ptport, - unsigned char *packet) +static void synaptics_pass_pt_packet(struct serio *ptport, u8 *packet) { struct psmouse *child = serio_get_drvdata(ptport); @@ -661,7 +715,7 @@ static void synaptics_pt_create(struct psmouse *psmouse) * Functions to interpret the absolute mode packets ****************************************************************************/ -static void synaptics_parse_agm(const unsigned char buf[], +static void synaptics_parse_agm(const u8 buf[], struct synaptics_data *priv, struct synaptics_hw_state *hw) { @@ -688,31 +742,31 @@ static void synaptics_parse_agm(const unsigned char buf[], } } -static void synaptics_parse_ext_buttons(const unsigned char buf[], +static void synaptics_parse_ext_buttons(const u8 buf[], struct synaptics_data *priv, struct synaptics_hw_state *hw) { unsigned int ext_bits = - (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) + 1) >> 1; + (SYN_CAP_MULTI_BUTTON_NO(priv->info.ext_cap) + 1) >> 1; unsigned int ext_mask = GENMASK(ext_bits - 1, 0); hw->ext_buttons = buf[4] & ext_mask; hw->ext_buttons |= (buf[5] & ext_mask) << ext_bits; } -static int synaptics_parse_hw_state(const unsigned char buf[], +static int synaptics_parse_hw_state(const u8 buf[], struct synaptics_data *priv, struct synaptics_hw_state *hw) { memset(hw, 0, sizeof(struct synaptics_hw_state)); - if (SYN_MODEL_NEWABS(priv->model_id)) { + if (SYN_MODEL_NEWABS(priv->info.model_id)) { hw->w = (((buf[0] & 0x30) >> 2) | ((buf[0] & 0x04) >> 1) | ((buf[3] & 0x04) >> 2)); - if ((SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) || - SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) && + if ((SYN_CAP_ADV_GESTURE(priv->info.ext_cap_0c) || + SYN_CAP_IMAGE_SENSOR(priv->info.ext_cap_0c)) && hw->w == 2) { synaptics_parse_agm(buf, priv, hw); return 1; @@ -765,7 +819,7 @@ static int synaptics_parse_hw_state(const unsigned char buf[], hw->left = priv->report_press; - } else if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) { + } else if (SYN_CAP_CLICKPAD(priv->info.ext_cap_0c)) { /* * Clickpad's button is transmitted as middle button, * however, since it is primary button, we will report @@ -773,18 +827,18 @@ static int synaptics_parse_hw_state(const unsigned char buf[], */ hw->left = ((buf[0] ^ buf[3]) & 0x01) ? 1 : 0; - } else if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) { + } else if (SYN_CAP_MIDDLE_BUTTON(priv->info.capabilities)) { hw->middle = ((buf[0] ^ buf[3]) & 0x01) ? 1 : 0; if (hw->w == 2) - hw->scroll = (signed char)(buf[1]); + hw->scroll = (s8)buf[1]; } - if (SYN_CAP_FOUR_BUTTON(priv->capabilities)) { + if (SYN_CAP_FOUR_BUTTON(priv->info.capabilities)) { hw->up = ((buf[0] ^ buf[3]) & 0x01) ? 1 : 0; hw->down = ((buf[0] ^ buf[3]) & 0x02) ? 1 : 0; } - if (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) > 0 && + if (SYN_CAP_MULTI_BUTTON_NO(priv->info.ext_cap) > 0 && ((buf[0] ^ buf[3]) & 0x02)) { synaptics_parse_ext_buttons(buf, priv, hw); } @@ -853,24 +907,24 @@ static void synaptics_report_ext_buttons(struct psmouse *psmouse, { struct input_dev *dev = psmouse->dev; struct synaptics_data *priv = psmouse->private; - int ext_bits = (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) + 1) >> 1; + int ext_bits = (SYN_CAP_MULTI_BUTTON_NO(priv->info.ext_cap) + 1) >> 1; int i; - if (!SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap)) + if (!SYN_CAP_MULTI_BUTTON_NO(priv->info.ext_cap)) return; /* Bug in FW 8.1 & 8.2, buttons are reported only when ExtBit is 1 */ - if ((SYN_ID_FULL(priv->identity) == 0x801 || - SYN_ID_FULL(priv->identity) == 0x802) && + if ((SYN_ID_FULL(priv->info.identity) == 0x801 || + SYN_ID_FULL(priv->info.identity) == 0x802) && !((psmouse->packet[0] ^ psmouse->packet[3]) & 0x02)) return; - if (!SYN_CAP_EXT_BUTTONS_STICK(priv->ext_cap_10)) { + if (!SYN_CAP_EXT_BUTTONS_STICK(priv->info.ext_cap_10)) { for (i = 0; i < ext_bits; i++) { input_report_key(dev, BTN_0 + 2 * i, - hw->ext_buttons & (1 << i)); + hw->ext_buttons & BIT(i)); input_report_key(dev, BTN_1 + 2 * i, - hw->ext_buttons & (1 << (i + ext_bits))); + hw->ext_buttons & BIT(i + ext_bits)); } return; } @@ -884,9 +938,9 @@ static void synaptics_report_ext_buttons(struct psmouse *psmouse, u8 pt_buttons; /* The trackstick expects at most 3 buttons */ - pt_buttons = SYN_CAP_EXT_BUTTON_STICK_L(hw->ext_buttons) | - SYN_CAP_EXT_BUTTON_STICK_R(hw->ext_buttons) << 1 | - SYN_CAP_EXT_BUTTON_STICK_M(hw->ext_buttons) << 2; + pt_buttons = SYN_EXT_BUTTON_STICK_L(hw->ext_buttons) | + SYN_EXT_BUTTON_STICK_R(hw->ext_buttons) << 1 | + SYN_EXT_BUTTON_STICK_M(hw->ext_buttons) << 2; serio_interrupt(priv->pt_port, PSMOUSE_OOB_EXTRA_BTNS, SERIO_OOB_DATA); @@ -903,10 +957,10 @@ static void synaptics_report_buttons(struct psmouse *psmouse, input_report_key(dev, BTN_LEFT, hw->left); input_report_key(dev, BTN_RIGHT, hw->right); - if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) + if (SYN_CAP_MIDDLE_BUTTON(priv->info.capabilities)) input_report_key(dev, BTN_MIDDLE, hw->middle); - if (SYN_CAP_FOUR_BUTTON(priv->capabilities)) { + if (SYN_CAP_FOUR_BUTTON(priv->info.capabilities)) { input_report_key(dev, BTN_FORWARD, hw->up); input_report_key(dev, BTN_BACK, hw->down); } @@ -931,7 +985,7 @@ static void synaptics_report_mt_data(struct psmouse *psmouse, pos[i].y = synaptics_invert_y(hw[i]->y); } - input_mt_assign_slots(dev, slot, pos, nsemi, DMAX * priv->x_res); + input_mt_assign_slots(dev, slot, pos, nsemi, DMAX * priv->info.x_res); for (i = 0; i < nsemi; i++) { input_mt_slot(dev, slot[i]); @@ -985,6 +1039,7 @@ static void synaptics_process_packet(struct psmouse *psmouse) { struct input_dev *dev = psmouse->dev; struct synaptics_data *priv = psmouse->private; + struct synaptics_device_info *info = &priv->info; struct synaptics_hw_state hw; int num_fingers; int finger_width; @@ -992,7 +1047,7 @@ static void synaptics_process_packet(struct psmouse *psmouse) if (synaptics_parse_hw_state(psmouse->packet, priv, &hw)) return; - if (SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) { + if (SYN_CAP_IMAGE_SENSOR(info->ext_cap_0c)) { synaptics_image_sensor_process(psmouse, &hw); return; } @@ -1020,18 +1075,18 @@ static void synaptics_process_packet(struct psmouse *psmouse) if (hw.z > 0 && hw.x > 1) { num_fingers = 1; finger_width = 5; - if (SYN_CAP_EXTENDED(priv->capabilities)) { + if (SYN_CAP_EXTENDED(info->capabilities)) { switch (hw.w) { case 0 ... 1: - if (SYN_CAP_MULTIFINGER(priv->capabilities)) + if (SYN_CAP_MULTIFINGER(info->capabilities)) num_fingers = hw.w + 2; break; case 2: - if (SYN_MODEL_PEN(priv->model_id)) + if (SYN_MODEL_PEN(info->model_id)) ; /* Nothing, treat a pen as a single finger */ break; case 4 ... 15: - if (SYN_CAP_PALMDETECT(priv->capabilities)) + if (SYN_CAP_PALMDETECT(info->capabilities)) finger_width = hw.w; break; } @@ -1046,7 +1101,7 @@ static void synaptics_process_packet(struct psmouse *psmouse) return; } - if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) + if (SYN_CAP_ADV_GESTURE(info->ext_cap_0c)) synaptics_report_semi_mt_data(dev, &hw, &priv->agm, num_fingers); @@ -1063,11 +1118,11 @@ static void synaptics_process_packet(struct psmouse *psmouse) } input_report_abs(dev, ABS_PRESSURE, hw.z); - if (SYN_CAP_PALMDETECT(priv->capabilities)) + if (SYN_CAP_PALMDETECT(info->capabilities)) input_report_abs(dev, ABS_TOOL_WIDTH, finger_width); input_report_key(dev, BTN_TOOL_FINGER, num_fingers == 1); - if (SYN_CAP_MULTIFINGER(priv->capabilities)) { + if (SYN_CAP_MULTIFINGER(info->capabilities)) { input_report_key(dev, BTN_TOOL_DOUBLETAP, num_fingers == 2); input_report_key(dev, BTN_TOOL_TRIPLETAP, num_fingers == 3); } @@ -1077,18 +1132,18 @@ static void synaptics_process_packet(struct psmouse *psmouse) input_sync(dev); } -static int synaptics_validate_byte(struct psmouse *psmouse, - int idx, unsigned char pkt_type) +static bool synaptics_validate_byte(struct psmouse *psmouse, + int idx, enum synaptics_pkt_type pkt_type) { - static const unsigned char newabs_mask[] = { 0xC8, 0x00, 0x00, 0xC8, 0x00 }; - static const unsigned char newabs_rel_mask[] = { 0xC0, 0x00, 0x00, 0xC0, 0x00 }; - static const unsigned char newabs_rslt[] = { 0x80, 0x00, 0x00, 0xC0, 0x00 }; - static const unsigned char oldabs_mask[] = { 0xC0, 0x60, 0x00, 0xC0, 0x60 }; - static const unsigned char oldabs_rslt[] = { 0xC0, 0x00, 0x00, 0x80, 0x00 }; - const char *packet = psmouse->packet; + static const u8 newabs_mask[] = { 0xC8, 0x00, 0x00, 0xC8, 0x00 }; + static const u8 newabs_rel_mask[] = { 0xC0, 0x00, 0x00, 0xC0, 0x00 }; + static const u8 newabs_rslt[] = { 0x80, 0x00, 0x00, 0xC0, 0x00 }; + static const u8 oldabs_mask[] = { 0xC0, 0x60, 0x00, 0xC0, 0x60 }; + static const u8 oldabs_rslt[] = { 0xC0, 0x00, 0x00, 0x80, 0x00 }; + const u8 *packet = psmouse->packet; if (idx < 0 || idx > 4) - return 0; + return false; switch (pkt_type) { @@ -1104,19 +1159,21 @@ static int synaptics_validate_byte(struct psmouse *psmouse, default: psmouse_err(psmouse, "unknown packet type %d\n", pkt_type); - return 0; + return false; } } -static unsigned char synaptics_detect_pkt_type(struct psmouse *psmouse) +static enum synaptics_pkt_type +synaptics_detect_pkt_type(struct psmouse *psmouse) { int i; - for (i = 0; i < 5; i++) + for (i = 0; i < 5; i++) { if (!synaptics_validate_byte(psmouse, i, SYN_NEWABS_STRICT)) { psmouse_info(psmouse, "using relaxed packet validation\n"); return SYN_NEWABS_RELAXED; } + } return SYN_NEWABS_STRICT; } @@ -1129,7 +1186,7 @@ static psmouse_ret_t synaptics_process_byte(struct psmouse *psmouse) if (unlikely(priv->pkt_type == SYN_NEWABS)) priv->pkt_type = synaptics_detect_pkt_type(psmouse); - if (SYN_CAP_PASS_THROUGH(priv->capabilities) && + if (SYN_CAP_PASS_THROUGH(priv->info.capabilities) && synaptics_is_pt_packet(psmouse->packet)) { if (priv->pt_port) synaptics_pass_pt_packet(priv->pt_port, @@ -1148,26 +1205,27 @@ static psmouse_ret_t synaptics_process_byte(struct psmouse *psmouse) * Driver initialization/cleanup functions ****************************************************************************/ static void set_abs_position_params(struct input_dev *dev, - struct synaptics_data *priv, int x_code, - int y_code) + struct synaptics_device_info *info, + int x_code, int y_code) { - int x_min = priv->x_min ?: XMIN_NOMINAL; - int x_max = priv->x_max ?: XMAX_NOMINAL; - int y_min = priv->y_min ?: YMIN_NOMINAL; - int y_max = priv->y_max ?: YMAX_NOMINAL; - int fuzz = SYN_CAP_REDUCED_FILTERING(priv->ext_cap_0c) ? + int x_min = info->x_min ?: XMIN_NOMINAL; + int x_max = info->x_max ?: XMAX_NOMINAL; + int y_min = info->y_min ?: YMIN_NOMINAL; + int y_max = info->y_max ?: YMAX_NOMINAL; + int fuzz = SYN_CAP_REDUCED_FILTERING(info->ext_cap_0c) ? SYN_REDUCED_FILTER_FUZZ : 0; input_set_abs_params(dev, x_code, x_min, x_max, fuzz, 0); input_set_abs_params(dev, y_code, y_min, y_max, fuzz, 0); - input_abs_set_res(dev, x_code, priv->x_res); - input_abs_set_res(dev, y_code, priv->y_res); + input_abs_set_res(dev, x_code, info->x_res); + input_abs_set_res(dev, y_code, info->y_res); } static void set_input_params(struct psmouse *psmouse, struct synaptics_data *priv) { struct input_dev *dev = psmouse->dev; + struct synaptics_device_info *info = &priv->info; int i; /* Things that apply to both modes */ @@ -1176,7 +1234,7 @@ static void set_input_params(struct psmouse *psmouse, __set_bit(BTN_LEFT, dev->keybit); __set_bit(BTN_RIGHT, dev->keybit); - if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) + if (SYN_CAP_MIDDLE_BUTTON(info->capabilities)) __set_bit(BTN_MIDDLE, dev->keybit); if (!priv->absolute_mode) { @@ -1189,15 +1247,15 @@ static void set_input_params(struct psmouse *psmouse, /* Absolute mode */ __set_bit(EV_ABS, dev->evbit); - set_abs_position_params(dev, priv, ABS_X, ABS_Y); + set_abs_position_params(dev, &priv->info, ABS_X, ABS_Y); input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0); if (cr48_profile_sensor) input_set_abs_params(dev, ABS_MT_PRESSURE, 0, 255, 0, 0); - if (SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) { - set_abs_position_params(dev, priv, ABS_MT_POSITION_X, - ABS_MT_POSITION_Y); + if (SYN_CAP_IMAGE_SENSOR(info->ext_cap_0c)) { + set_abs_position_params(dev, info, + ABS_MT_POSITION_X, ABS_MT_POSITION_Y); /* Image sensors can report per-contact pressure */ input_set_abs_params(dev, ABS_MT_PRESSURE, 0, 255, 0, 0); input_mt_init_slots(dev, 2, INPUT_MT_POINTER | INPUT_MT_TRACK); @@ -1205,9 +1263,9 @@ static void set_input_params(struct psmouse *psmouse, /* Image sensors can signal 4 and 5 finger clicks */ __set_bit(BTN_TOOL_QUADTAP, dev->keybit); __set_bit(BTN_TOOL_QUINTTAP, dev->keybit); - } else if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) { - set_abs_position_params(dev, priv, ABS_MT_POSITION_X, - ABS_MT_POSITION_Y); + } else if (SYN_CAP_ADV_GESTURE(info->ext_cap_0c)) { + set_abs_position_params(dev, info, + ABS_MT_POSITION_X, ABS_MT_POSITION_Y); /* * Profile sensor in CR-48 tracks contacts reasonably well, * other non-image sensors with AGM use semi-mt. @@ -1218,35 +1276,35 @@ static void set_input_params(struct psmouse *psmouse, INPUT_MT_TRACK : INPUT_MT_SEMI_MT)); } - if (SYN_CAP_PALMDETECT(priv->capabilities)) + if (SYN_CAP_PALMDETECT(info->capabilities)) input_set_abs_params(dev, ABS_TOOL_WIDTH, 0, 15, 0, 0); __set_bit(BTN_TOUCH, dev->keybit); __set_bit(BTN_TOOL_FINGER, dev->keybit); - if (SYN_CAP_MULTIFINGER(priv->capabilities)) { + if (SYN_CAP_MULTIFINGER(info->capabilities)) { __set_bit(BTN_TOOL_DOUBLETAP, dev->keybit); __set_bit(BTN_TOOL_TRIPLETAP, dev->keybit); } - if (SYN_CAP_FOUR_BUTTON(priv->capabilities) || - SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) { + if (SYN_CAP_FOUR_BUTTON(info->capabilities) || + SYN_CAP_MIDDLE_BUTTON(info->capabilities)) { __set_bit(BTN_FORWARD, dev->keybit); __set_bit(BTN_BACK, dev->keybit); } - if (!SYN_CAP_EXT_BUTTONS_STICK(priv->ext_cap_10)) - for (i = 0; i < SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap); i++) + if (!SYN_CAP_EXT_BUTTONS_STICK(info->ext_cap_10)) + for (i = 0; i < SYN_CAP_MULTI_BUTTON_NO(info->ext_cap); i++) __set_bit(BTN_0 + i, dev->keybit); __clear_bit(EV_REL, dev->evbit); __clear_bit(REL_X, dev->relbit); __clear_bit(REL_Y, dev->relbit); - if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) { + if (SYN_CAP_CLICKPAD(info->ext_cap_0c)) { __set_bit(INPUT_PROP_BUTTONPAD, dev->propbit); if (psmouse_matches_pnp_id(psmouse, topbuttonpad_pnp_ids) && - !SYN_CAP_EXT_BUTTONS_STICK(priv->ext_cap_10)) + !SYN_CAP_EXT_BUTTONS_STICK(info->ext_cap_10)) __set_bit(INPUT_PROP_TOPBUTTONPAD, dev->propbit); /* Clickpads report only left button */ __clear_bit(BTN_RIGHT, dev->keybit); @@ -1300,7 +1358,14 @@ static void synaptics_disconnect(struct psmouse *psmouse) { struct synaptics_data *priv = psmouse->private; - if (!priv->absolute_mode && SYN_ID_DISGEST_SUPPORTED(priv->identity)) + /* + * We might have left a breadcrumb when trying to + * set up SMbus companion. + */ + psmouse_smbus_cleanup(psmouse); + + if (!priv->absolute_mode && + SYN_ID_DISGEST_SUPPORTED(priv->info.identity)) device_remove_file(&psmouse->ps2dev.serio->dev, &psmouse_attr_disable_gesture.dattr); @@ -1312,8 +1377,8 @@ static void synaptics_disconnect(struct psmouse *psmouse) static int synaptics_reconnect(struct psmouse *psmouse) { struct synaptics_data *priv = psmouse->private; - struct synaptics_data old_priv = *priv; - unsigned char param[2]; + struct synaptics_device_info info; + u8 param[2]; int retry = 0; int error; @@ -1334,32 +1399,34 @@ static int synaptics_reconnect(struct psmouse *psmouse) } while (error && ++retry < 3); if (error) - return -1; + return error; if (retry > 1) psmouse_dbg(psmouse, "reconnected after %d tries\n", retry); - if (synaptics_query_hardware(psmouse)) { + error = synaptics_query_hardware(psmouse, &info); + if (error) { psmouse_err(psmouse, "Unable to query device.\n"); - return -1; + return error; } - if (synaptics_set_mode(psmouse)) { + error = synaptics_set_mode(psmouse); + if (error) { psmouse_err(psmouse, "Unable to initialize device.\n"); - return -1; + return error; } - if (old_priv.identity != priv->identity || - old_priv.model_id != priv->model_id || - old_priv.capabilities != priv->capabilities || - old_priv.ext_cap != priv->ext_cap) { + if (info.identity != priv->info.identity || + info.model_id != priv->info.model_id || + info.capabilities != priv->info.capabilities || + info.ext_cap != priv->info.ext_cap) { psmouse_err(psmouse, - "hardware appears to be different: id(%ld-%ld), model(%ld-%ld), caps(%lx-%lx), ext(%lx-%lx).\n", - old_priv.identity, priv->identity, - old_priv.model_id, priv->model_id, - old_priv.capabilities, priv->capabilities, - old_priv.ext_cap, priv->ext_cap); - return -1; + "hardware appears to be different: id(%u-%u), model(%u-%u), caps(%x-%x), ext(%x-%x).\n", + priv->info.identity, info.identity, + priv->info.model_id, info.model_id, + priv->info.capabilities, info.capabilities, + priv->info.ext_cap, info.ext_cap); + return -ENXIO; } return 0; @@ -1439,36 +1506,22 @@ void __init synaptics_module_init(void) cr48_profile_sensor = dmi_check_system(cr48_dmi_table); } -static int __synaptics_init(struct psmouse *psmouse, bool absolute_mode) +static int synaptics_init_ps2(struct psmouse *psmouse, + struct synaptics_device_info *info, + bool absolute_mode) { struct synaptics_data *priv; - int err = -1; + int err; - /* - * The OLPC XO has issues with Synaptics' absolute mode; the constant - * packet spew overloads the EC such that key presses on the keyboard - * are missed. Given that, don't even attempt to use Absolute mode. - * Relative mode seems to work just fine. - */ - if (absolute_mode && broken_olpc_ec) { - psmouse_info(psmouse, - "OLPC XO detected, not enabling Synaptics protocol.\n"); - return -ENODEV; - } + synaptics_apply_quirks(psmouse, info); psmouse->private = priv = kzalloc(sizeof(struct synaptics_data), GFP_KERNEL); if (!priv) return -ENOMEM; - psmouse_reset(psmouse); - - if (synaptics_query_hardware(psmouse)) { - psmouse_err(psmouse, "Unable to query device.\n"); - goto init_fail; - } - + priv->info = *info; priv->absolute_mode = absolute_mode; - if (SYN_ID_DISGEST_SUPPORTED(priv->identity)) + if (SYN_ID_DISGEST_SUPPORTED(info->identity)) priv->disable_gesture = true; /* @@ -1477,20 +1530,22 @@ static int __synaptics_init(struct psmouse *psmouse, bool absolute_mode) */ priv->is_forcepad = psmouse_matches_pnp_id(psmouse, forcepad_pnp_ids); - if (synaptics_set_mode(psmouse)) { + err = synaptics_set_mode(psmouse); + if (err) { psmouse_err(psmouse, "Unable to initialize device.\n"); goto init_fail; } - priv->pkt_type = SYN_MODEL_NEWABS(priv->model_id) ? SYN_NEWABS : SYN_OLDABS; + priv->pkt_type = SYN_MODEL_NEWABS(info->model_id) ? + SYN_NEWABS : SYN_OLDABS; psmouse_info(psmouse, - "Touchpad model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx/%#lx, board id: %lu, fw id: %lu\n", - SYN_ID_MODEL(priv->identity), - SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity), - priv->model_id, - priv->capabilities, priv->ext_cap, priv->ext_cap_0c, - priv->ext_cap_10, priv->board_id, priv->firmware_id); + "Touchpad model: %lu, fw: %lu.%lu, id: %#x, caps: %#x/%#x/%#x/%#x, board id: %u, fw id: %u\n", + SYN_ID_MODEL(info->identity), + SYN_ID_MAJOR(info->identity), SYN_ID_MINOR(info->identity), + info->model_id, + info->capabilities, info->ext_cap, info->ext_cap_0c, + info->ext_cap_10, info->board_id, info->firmware_id); set_input_params(psmouse, priv); @@ -1501,8 +1556,8 @@ static int __synaptics_init(struct psmouse *psmouse, bool absolute_mode) * Hardware info bits seem to be good candidates as they * are documented to be for Synaptics corp. internal use. */ - psmouse->model = ((priv->model_id & 0x00ff0000) >> 8) | - (priv->model_id & 0x000000ff); + psmouse->model = ((info->model_id & 0x00ff0000) >> 8) | + (info->model_id & 0x000000ff); if (absolute_mode) { psmouse->protocol_handler = synaptics_process_byte; @@ -1520,7 +1575,7 @@ static int __synaptics_init(struct psmouse *psmouse, bool absolute_mode) /* Synaptics can usually stay in sync without extra help */ psmouse->resync_time = 0; - if (SYN_CAP_PASS_THROUGH(priv->capabilities)) + if (SYN_CAP_PASS_THROUGH(info->capabilities)) synaptics_pt_create(psmouse); /* @@ -1535,7 +1590,7 @@ static int __synaptics_init(struct psmouse *psmouse, bool absolute_mode) psmouse->rate = 40; } - if (!priv->absolute_mode && SYN_ID_DISGEST_SUPPORTED(priv->identity)) { + if (!priv->absolute_mode && SYN_ID_DISGEST_SUPPORTED(info->identity)) { err = device_create_file(&psmouse->ps2dev.serio->dev, &psmouse_attr_disable_gesture.dattr); if (err) { @@ -1553,7 +1608,23 @@ static int __synaptics_init(struct psmouse *psmouse, bool absolute_mode) return err; } -int synaptics_init(struct psmouse *psmouse) +static int __synaptics_init(struct psmouse *psmouse, bool absolute_mode) +{ + struct synaptics_device_info info; + int error; + + psmouse_reset(psmouse); + + error = synaptics_query_hardware(psmouse, &info); + if (error) { + psmouse_err(psmouse, "Unable to query device: %d\n", error); + return error; + } + + return synaptics_init_ps2(psmouse, &info, absolute_mode); +} + +int synaptics_init_absolute(struct psmouse *psmouse) { return __synaptics_init(psmouse, true); } @@ -1563,15 +1634,204 @@ int synaptics_init_relative(struct psmouse *psmouse) return __synaptics_init(psmouse, false); } +static int synaptics_setup_ps2(struct psmouse *psmouse, + struct synaptics_device_info *info) +{ + bool absolute_mode = true; + int error; + + /* + * The OLPC XO has issues with Synaptics' absolute mode; the constant + * packet spew overloads the EC such that key presses on the keyboard + * are missed. Given that, don't even attempt to use Absolute mode. + * Relative mode seems to work just fine. + */ + if (broken_olpc_ec) { + psmouse_info(psmouse, + "OLPC XO detected, forcing relative protocol.\n"); + absolute_mode = false; + } + + error = synaptics_init_ps2(psmouse, info, absolute_mode); + if (error) + return error; + + return absolute_mode ? PSMOUSE_SYNAPTICS : PSMOUSE_SYNAPTICS_RELATIVE; +} + #else /* CONFIG_MOUSE_PS2_SYNAPTICS */ void __init synaptics_module_init(void) { } -int synaptics_init(struct psmouse *psmouse) +static int __maybe_unused +synaptics_setup_ps2(struct psmouse *psmouse, + struct synaptics_device_info *info) { return -ENOSYS; } #endif /* CONFIG_MOUSE_PS2_SYNAPTICS */ + +#ifdef CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS + +/* + * The newest Synaptics device can use a secondary bus (called InterTouch) which + * provides a better bandwidth and allow a better control of the touchpads. + * This is used to decide if we need to use this bus or not. + */ +enum { + SYNAPTICS_INTERTOUCH_NOT_SET = -1, + SYNAPTICS_INTERTOUCH_OFF, + SYNAPTICS_INTERTOUCH_ON, +}; + +static int synaptics_intertouch = SYNAPTICS_INTERTOUCH_NOT_SET; +module_param_named(synaptics_intertouch, synaptics_intertouch, int, 0644); +MODULE_PARM_DESC(synaptics_intertouch, "Use a secondary bus for the Synaptics device."); + +static int synaptics_create_intertouch(struct psmouse *psmouse, + struct synaptics_device_info *info, + bool leave_breadcrumbs) +{ + bool topbuttonpad = + psmouse_matches_pnp_id(psmouse, topbuttonpad_pnp_ids) && + !SYN_CAP_EXT_BUTTONS_STICK(info->ext_cap_10); + const struct rmi_device_platform_data pdata = { + .sensor_pdata = { + .sensor_type = rmi_sensor_touchpad, + .axis_align.flip_y = true, + /* to prevent cursors jumps: */ + .kernel_tracking = true, + .topbuttonpad = topbuttonpad, + }, + .f30_data = { + .buttonpad = SYN_CAP_CLICKPAD(info->ext_cap_0c), + .trackstick_buttons = + !!SYN_CAP_EXT_BUTTONS_STICK(info->ext_cap_10), + }, + }; + const struct i2c_board_info intertouch_board = { + I2C_BOARD_INFO("rmi4_smbus", 0x2c), + .flags = I2C_CLIENT_HOST_NOTIFY, + }; + + return psmouse_smbus_init(psmouse, &intertouch_board, + &pdata, sizeof(pdata), + leave_breadcrumbs); +} + +/** + * synaptics_setup_intertouch - called once the PS/2 devices are enumerated + * and decides to instantiate a SMBus InterTouch device. + */ +static int synaptics_setup_intertouch(struct psmouse *psmouse, + struct synaptics_device_info *info, + bool leave_breadcrumbs) +{ + int error; + + if (synaptics_intertouch == SYNAPTICS_INTERTOUCH_OFF) + return -ENXIO; + + if (synaptics_intertouch == SYNAPTICS_INTERTOUCH_NOT_SET) { + if (!psmouse_matches_pnp_id(psmouse, topbuttonpad_pnp_ids) && + !psmouse_matches_pnp_id(psmouse, smbus_pnp_ids)) + return -ENXIO; + } + + psmouse_info(psmouse, "Trying to set up SMBus access\n"); + + error = synaptics_create_intertouch(psmouse, info, leave_breadcrumbs); + if (error) { + if (error == -EAGAIN) + psmouse_info(psmouse, "SMbus companion is not ready yet\n"); + else + psmouse_err(psmouse, "unable to create intertouch device\n"); + + return error; + } + + return 0; +} + +int synaptics_init_smbus(struct psmouse *psmouse) +{ + struct synaptics_device_info info; + int error; + + psmouse_reset(psmouse); + + error = synaptics_query_hardware(psmouse, &info); + if (error) { + psmouse_err(psmouse, "Unable to query device: %d\n", error); + return error; + } + + if (!SYN_CAP_INTERTOUCH(info.ext_cap_0c)) + return -ENXIO; + + return synaptics_create_intertouch(psmouse, &info, false); +} + +#else /* CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS */ + +static int __maybe_unused +synaptics_setup_intertouch(struct psmouse *psmouse, + struct synaptics_device_info *info, + bool leave_breadcrumbs) +{ + return -ENOSYS; +} + +int synaptics_init_smbus(struct psmouse *psmouse) +{ + return -ENOSYS; +} + +#endif /* CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS */ + +#if defined(CONFIG_MOUSE_PS2_SYNAPTICS) || \ + defined(CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS) + +int synaptics_init(struct psmouse *psmouse) +{ + struct synaptics_device_info info; + int error; + int retval; + + psmouse_reset(psmouse); + + error = synaptics_query_hardware(psmouse, &info); + if (error) { + psmouse_err(psmouse, "Unable to query device: %d\n", error); + return error; + } + + if (SYN_CAP_INTERTOUCH(info.ext_cap_0c)) { + error = synaptics_setup_intertouch(psmouse, &info, true); + if (!error) + return PSMOUSE_SYNAPTICS_SMBUS; + } + + retval = synaptics_setup_ps2(psmouse, &info); + if (retval < 0) { + /* + * Not using any flavor of Synaptics support, so clean up + * SMbus breadcrumbs, if any. + */ + psmouse_smbus_cleanup(psmouse); + } + + return retval; +} + +#else /* CONFIG_MOUSE_PS2_SYNAPTICS || CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS */ + +int synaptics_init(struct psmouse *psmouse) +{ + return -ENOSYS; +} + +#endif /* CONFIG_MOUSE_PS2_SYNAPTICS || CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS */ diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h index 116ae2546ace..fc00e005c611 100644 --- a/drivers/input/mouse/synaptics.h +++ b/drivers/input/mouse/synaptics.h @@ -25,36 +25,37 @@ #define SYN_QUE_MEXT_CAPAB_10 0x10 /* synatics modes */ -#define SYN_BIT_ABSOLUTE_MODE (1 << 7) -#define SYN_BIT_HIGH_RATE (1 << 6) -#define SYN_BIT_SLEEP_MODE (1 << 3) -#define SYN_BIT_DISABLE_GESTURE (1 << 2) -#define SYN_BIT_FOUR_BYTE_CLIENT (1 << 1) -#define SYN_BIT_W_MODE (1 << 0) +#define SYN_BIT_ABSOLUTE_MODE BIT(7) +#define SYN_BIT_HIGH_RATE BIT(6) +#define SYN_BIT_SLEEP_MODE BIT(3) +#define SYN_BIT_DISABLE_GESTURE BIT(2) +#define SYN_BIT_FOUR_BYTE_CLIENT BIT(1) +#define SYN_BIT_W_MODE BIT(0) /* synaptics model ID bits */ -#define SYN_MODEL_ROT180(m) ((m) & (1 << 23)) -#define SYN_MODEL_PORTRAIT(m) ((m) & (1 << 22)) -#define SYN_MODEL_SENSOR(m) (((m) >> 16) & 0x3f) -#define SYN_MODEL_HARDWARE(m) (((m) >> 9) & 0x7f) -#define SYN_MODEL_NEWABS(m) ((m) & (1 << 7)) -#define SYN_MODEL_PEN(m) ((m) & (1 << 6)) -#define SYN_MODEL_SIMPLIC(m) ((m) & (1 << 5)) -#define SYN_MODEL_GEOMETRY(m) ((m) & 0x0f) +#define SYN_MODEL_ROT180(m) ((m) & BIT(23)) +#define SYN_MODEL_PORTRAIT(m) ((m) & BIT(22)) +#define SYN_MODEL_SENSOR(m) (((m) & GENMASK(21, 16)) >> 16) +#define SYN_MODEL_HARDWARE(m) (((m) & GENMASK(15, 9)) >> 9) +#define SYN_MODEL_NEWABS(m) ((m) & BIT(7)) +#define SYN_MODEL_PEN(m) ((m) & BIT(6)) +#define SYN_MODEL_SIMPLIC(m) ((m) & BIT(5)) +#define SYN_MODEL_GEOMETRY(m) ((m) & GENMASK(3, 0)) /* synaptics capability bits */ -#define SYN_CAP_EXTENDED(c) ((c) & (1 << 23)) -#define SYN_CAP_MIDDLE_BUTTON(c) ((c) & (1 << 18)) -#define SYN_CAP_PASS_THROUGH(c) ((c) & (1 << 7)) -#define SYN_CAP_SLEEP(c) ((c) & (1 << 4)) -#define SYN_CAP_FOUR_BUTTON(c) ((c) & (1 << 3)) -#define SYN_CAP_MULTIFINGER(c) ((c) & (1 << 1)) -#define SYN_CAP_PALMDETECT(c) ((c) & (1 << 0)) -#define SYN_CAP_SUBMODEL_ID(c) (((c) & 0x00ff00) >> 8) -#define SYN_EXT_CAP_REQUESTS(c) (((c) & 0x700000) >> 20) -#define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) & 0x00f000) >> 12) -#define SYN_CAP_PRODUCT_ID(ec) (((ec) & 0xff0000) >> 16) -#define SYN_MEXT_CAP_BIT(m) ((m) & (1 << 1)) +#define SYN_CAP_EXTENDED(c) ((c) & BIT(23)) +#define SYN_CAP_MIDDLE_BUTTON(c) ((c) & BIT(18)) +#define SYN_CAP_PASS_THROUGH(c) ((c) & BIT(7)) +#define SYN_CAP_SLEEP(c) ((c) & BIT(4)) +#define SYN_CAP_FOUR_BUTTON(c) ((c) & BIT(3)) +#define SYN_CAP_MULTIFINGER(c) ((c) & BIT(1)) +#define SYN_CAP_PALMDETECT(c) ((c) & BIT(0)) +#define SYN_CAP_SUBMODEL_ID(c) (((c) & GENMASK(15, 8)) >> 8) +#define SYN_EXT_CAP_REQUESTS(c) (((c) & GENMASK(22, 20)) >> 20) +#define SYN_CAP_MB_MASK GENMASK(15, 12) +#define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) & SYN_CAP_MB_MASK) >> 12) +#define SYN_CAP_PRODUCT_ID(ec) (((ec) & GENMASK(23, 16)) >> 16) +#define SYN_MEXT_CAP_BIT(m) ((m) & BIT(1)) /* * The following describes response for the 0x0c query. @@ -83,13 +84,14 @@ * hinged at the top. * 2 0x20 report min query 0x0f gives min coord reported */ -#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100000) /* 1-button ClickPad */ -#define SYN_CAP_CLICKPAD2BTN(ex0c) ((ex0c) & 0x000100) /* 2-button ClickPad */ -#define SYN_CAP_MAX_DIMENSIONS(ex0c) ((ex0c) & 0x020000) -#define SYN_CAP_MIN_DIMENSIONS(ex0c) ((ex0c) & 0x002000) -#define SYN_CAP_ADV_GESTURE(ex0c) ((ex0c) & 0x080000) -#define SYN_CAP_REDUCED_FILTERING(ex0c) ((ex0c) & 0x000400) -#define SYN_CAP_IMAGE_SENSOR(ex0c) ((ex0c) & 0x000800) +#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & BIT(20)) /* 1-button ClickPad */ +#define SYN_CAP_CLICKPAD2BTN(ex0c) ((ex0c) & BIT(8)) /* 2-button ClickPad */ +#define SYN_CAP_MAX_DIMENSIONS(ex0c) ((ex0c) & BIT(17)) +#define SYN_CAP_MIN_DIMENSIONS(ex0c) ((ex0c) & BIT(13)) +#define SYN_CAP_ADV_GESTURE(ex0c) ((ex0c) & BIT(19)) +#define SYN_CAP_REDUCED_FILTERING(ex0c) ((ex0c) & BIT(10)) +#define SYN_CAP_IMAGE_SENSOR(ex0c) ((ex0c) & BIT(11)) +#define SYN_CAP_INTERTOUCH(ex0c) ((ex0c) & BIT(14)) /* * The following descibes response for the 0x10 query. @@ -108,42 +110,44 @@ * 3 0xff SecurePad height the height of the SecurePad fingerprint * reader. */ -#define SYN_CAP_EXT_BUTTONS_STICK(ex10) ((ex10) & 0x010000) -#define SYN_CAP_SECUREPAD(ex10) ((ex10) & 0x020000) +#define SYN_CAP_EXT_BUTTONS_STICK(ex10) ((ex10) & BIT(16)) +#define SYN_CAP_SECUREPAD(ex10) ((ex10) & BIT(17)) -#define SYN_CAP_EXT_BUTTON_STICK_L(eb) (!!((eb) & 0x01)) -#define SYN_CAP_EXT_BUTTON_STICK_M(eb) (!!((eb) & 0x02)) -#define SYN_CAP_EXT_BUTTON_STICK_R(eb) (!!((eb) & 0x04)) +#define SYN_EXT_BUTTON_STICK_L(eb) (((eb) & BIT(0)) >> 0) +#define SYN_EXT_BUTTON_STICK_M(eb) (((eb) & BIT(1)) >> 1) +#define SYN_EXT_BUTTON_STICK_R(eb) (((eb) & BIT(2)) >> 2) /* synaptics modes query bits */ -#define SYN_MODE_ABSOLUTE(m) ((m) & (1 << 7)) -#define SYN_MODE_RATE(m) ((m) & (1 << 6)) -#define SYN_MODE_BAUD_SLEEP(m) ((m) & (1 << 3)) -#define SYN_MODE_DISABLE_GESTURE(m) ((m) & (1 << 2)) -#define SYN_MODE_PACKSIZE(m) ((m) & (1 << 1)) -#define SYN_MODE_WMODE(m) ((m) & (1 << 0)) +#define SYN_MODE_ABSOLUTE(m) ((m) & BIT(7)) +#define SYN_MODE_RATE(m) ((m) & BIT(6)) +#define SYN_MODE_BAUD_SLEEP(m) ((m) & BIT(3)) +#define SYN_MODE_DISABLE_GESTURE(m) ((m) & BIT(2)) +#define SYN_MODE_PACKSIZE(m) ((m) & BIT(1)) +#define SYN_MODE_WMODE(m) ((m) & BIT(0)) /* synaptics identify query bits */ -#define SYN_ID_MODEL(i) (((i) >> 4) & 0x0f) -#define SYN_ID_MAJOR(i) ((i) & 0x0f) -#define SYN_ID_MINOR(i) (((i) >> 16) & 0xff) +#define SYN_ID_MODEL(i) (((i) & GENMASK(7, 4)) >> 4) +#define SYN_ID_MAJOR(i) (((i) & GENMASK(3, 0)) >> 0) +#define SYN_ID_MINOR(i) (((i) & GENMASK(23, 16)) >> 16) #define SYN_ID_FULL(i) ((SYN_ID_MAJOR(i) << 8) | SYN_ID_MINOR(i)) -#define SYN_ID_IS_SYNAPTICS(i) ((((i) >> 8) & 0xff) == 0x47) +#define SYN_ID_IS_SYNAPTICS(i) (((i) & GENMASK(15, 8)) == 0x004700U) #define SYN_ID_DISGEST_SUPPORTED(i) (SYN_ID_MAJOR(i) >= 4) /* synaptics special commands */ #define SYN_PS_SET_MODE2 0x14 #define SYN_PS_CLIENT_CMD 0x28 -/* synaptics packet types */ -#define SYN_NEWABS 0 -#define SYN_NEWABS_STRICT 1 -#define SYN_NEWABS_RELAXED 2 -#define SYN_OLDABS 3 - /* amount to fuzz position data when touchpad reports reduced filtering */ #define SYN_REDUCED_FILTER_FUZZ 8 +/* synaptics packet types */ +enum synaptics_pkt_type { + SYN_NEWABS, + SYN_NEWABS_STRICT, + SYN_NEWABS_RELAXED, + SYN_OLDABS, +}; + /* * A structure to describe the state of the touchpad hardware (buttons and pad) */ @@ -157,26 +161,30 @@ struct synaptics_hw_state { unsigned int middle:1; unsigned int up:1; unsigned int down:1; - unsigned char ext_buttons; - signed char scroll; + u8 ext_buttons; + s8 scroll; +}; + +/* Data read from the touchpad */ +struct synaptics_device_info { + u32 model_id; /* Model-ID */ + u32 firmware_id; /* Firmware-ID */ + u32 board_id; /* Board-ID */ + u32 capabilities; /* Capabilities */ + u32 ext_cap; /* Extended Capabilities */ + u32 ext_cap_0c; /* Ext Caps from 0x0c query */ + u32 ext_cap_10; /* Ext Caps from 0x10 query */ + u32 identity; /* Identification */ + u32 x_res, y_res; /* X/Y resolution in units/mm */ + u32 x_max, y_max; /* Max coordinates (from FW) */ + u32 x_min, y_min; /* Min coordinates (from FW) */ }; struct synaptics_data { - /* Data read from the touchpad */ - unsigned long int model_id; /* Model-ID */ - unsigned long int firmware_id; /* Firmware-ID */ - unsigned long int board_id; /* Board-ID */ - unsigned long int capabilities; /* Capabilities */ - unsigned long int ext_cap; /* Extended Capabilities */ - unsigned long int ext_cap_0c; /* Ext Caps from 0x0c query */ - unsigned long int ext_cap_10; /* Ext Caps from 0x10 query */ - unsigned long int identity; /* Identification */ - unsigned int x_res, y_res; /* X/Y resolution in units/mm */ - unsigned int x_max, y_max; /* Max coordinates (from FW) */ - unsigned int x_min, y_min; /* Min coordinates (from FW) */ - - unsigned char pkt_type; /* packet type - old, new, etc */ - unsigned char mode; /* current mode byte */ + struct synaptics_device_info info; + + enum synaptics_pkt_type pkt_type; /* packet type - old, new, etc */ + u8 mode; /* current mode byte */ int scroll; bool absolute_mode; /* run in Absolute mode */ @@ -200,8 +208,10 @@ struct synaptics_data { void synaptics_module_init(void); int synaptics_detect(struct psmouse *psmouse, bool set_properties); -int synaptics_init(struct psmouse *psmouse); +int synaptics_init_absolute(struct psmouse *psmouse); int synaptics_init_relative(struct psmouse *psmouse); +int synaptics_init_smbus(struct psmouse *psmouse); +int synaptics_init(struct psmouse *psmouse); void synaptics_reset(struct psmouse *psmouse); #endif /* _SYNAPTICS_H */ diff --git a/drivers/input/mouse/synaptics_i2c.c b/drivers/input/mouse/synaptics_i2c.c index cb2bf203f4ca..8538318d332c 100644 --- a/drivers/input/mouse/synaptics_i2c.c +++ b/drivers/input/mouse/synaptics_i2c.c @@ -652,9 +652,18 @@ static const struct i2c_device_id synaptics_i2c_id_table[] = { }; MODULE_DEVICE_TABLE(i2c, synaptics_i2c_id_table); +#ifdef CONFIG_OF +static const struct of_device_id synaptics_i2c_of_match[] = { + { .compatible = "synaptics,synaptics_i2c", }, + { }, +}; +MODULE_DEVICE_TABLE(of, synaptics_i2c_of_match); +#endif + static struct i2c_driver synaptics_i2c_driver = { .driver = { .name = DRIVER_NAME, + .of_match_table = of_match_ptr(synaptics_i2c_of_match), .pm = &synaptics_i2c_pm, }, diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c index d64fc92858f2..4f2bb5947a4e 100644 --- a/drivers/input/rmi4/rmi_driver.c +++ b/drivers/input/rmi4/rmi_driver.c @@ -251,7 +251,7 @@ static int rmi_irq_init(struct rmi_device *rmi_dev) ret = devm_request_threaded_irq(&rmi_dev->dev, pdata->irq, NULL, rmi_irq_fn, irq_flags | IRQF_ONESHOT, - dev_name(rmi_dev->xport->dev), + dev_driver_string(rmi_dev->xport->dev), rmi_dev); if (ret < 0) { dev_err(&rmi_dev->dev, "Failed to register interrupt %d\n", @@ -1234,16 +1234,21 @@ static int rmi_driver_probe(struct device *dev) if (retval < 0) goto err_destroy_functions; - if (data->f01_container->dev.driver) + if (data->f01_container->dev.driver) { /* Driver already bound, so enable ATTN now. */ - return rmi_enable_sensor(rmi_dev); + retval = rmi_enable_sensor(rmi_dev); + if (retval) + goto err_disable_irq; + } return 0; +err_disable_irq: + rmi_disable_irq(rmi_dev, false); err_destroy_functions: rmi_free_function_list(rmi_dev); err: - return retval < 0 ? retval : 0; + return retval; } static struct rmi_driver rmi_physical_driver = { diff --git a/drivers/input/rmi4/rmi_f12.c b/drivers/input/rmi4/rmi_f12.c index 07aff4356fe0..8b0db086d68a 100644 --- a/drivers/input/rmi4/rmi_f12.c +++ b/drivers/input/rmi4/rmi_f12.c @@ -113,20 +113,16 @@ static int rmi_f12_read_sensor_tuning(struct f12_data *f12) } if (rmi_register_desc_has_subpacket(item, 2)) { - sensor->axis_align.clip_x_low = buf[offset]; - sensor->axis_align.clip_x_high = sensor->max_x - - buf[offset + 1]; - sensor->axis_align.clip_y_low = buf[offset + 2]; - sensor->axis_align.clip_y_high = sensor->max_y - - buf[offset + 3]; + /* Units 1/128 sensor pitch */ + rmi_dbg(RMI_DEBUG_FN, &fn->dev, + "%s: Inactive Border xlo:%d xhi:%d ylo:%d yhi:%d\n", + __func__, + buf[offset], buf[offset + 1], + buf[offset + 2], buf[offset + 3]); + offset += 4; } - rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: x low: %d x high: %d y low: %d y high: %d\n", - __func__, - sensor->axis_align.clip_x_low, sensor->axis_align.clip_x_high, - sensor->axis_align.clip_y_low, sensor->axis_align.clip_y_high); - if (rmi_register_desc_has_subpacket(item, 3)) { rx_receivers = buf[offset]; tx_receivers = buf[offset + 1]; diff --git a/drivers/input/rmi4/rmi_f34.c b/drivers/input/rmi4/rmi_f34.c index 425fe140e9df..b8ee78e0d61f 100644 --- a/drivers/input/rmi4/rmi_f34.c +++ b/drivers/input/rmi4/rmi_f34.c @@ -105,16 +105,27 @@ static int rmi_f34_attention(struct rmi_function *fn, unsigned long *irq_bits) { struct f34_data *f34 = dev_get_drvdata(&fn->dev); int ret; + u8 status; - if (f34->bl_version != 5) - return 0; + if (f34->bl_version == 5) { + ret = rmi_read(f34->fn->rmi_dev, f34->v5.ctrl_address, + &status); + rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: status: %#02x, ret: %d\n", + __func__, status, ret); - ret = rmi_read(f34->fn->rmi_dev, f34->v5.ctrl_address, &f34->v5.status); - rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: status: %#02x, ret: %d\n", - __func__, f34->v5.status, ret); - - if (!ret && !(f34->v5.status & 0x7f)) - complete(&f34->v5.cmd_done); + if (!ret && !(status & 0x7f)) + complete(&f34->v5.cmd_done); + } else { + ret = rmi_read_block(f34->fn->rmi_dev, + f34->fn->fd.data_base_addr + + f34->v7.off.flash_status, + &status, sizeof(status)); + rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: status: %#02x, ret: %d\n", + __func__, status, ret); + + if (!ret && !(status & 0x1f)) + complete(&f34->v7.cmd_done); + } return 0; } diff --git a/drivers/input/rmi4/rmi_f34.h b/drivers/input/rmi4/rmi_f34.h index 43a91349b28d..32c4e9581c68 100644 --- a/drivers/input/rmi4/rmi_f34.h +++ b/drivers/input/rmi4/rmi_f34.h @@ -30,6 +30,7 @@ #define F34_IDLE_WAIT_MS 500 #define F34_ENABLE_WAIT_MS 300 #define F34_ERASE_WAIT_MS 5000 +#define F34_WRITE_WAIT_MS 3000 #define F34_BOOTLOADER_ID_LEN 2 @@ -47,11 +48,6 @@ #define CONFIG_ID_SIZE 32 #define PRODUCT_ID_SIZE 10 -#define ENABLE_WAIT_MS (1 * 1000) -#define WRITE_WAIT_MS (3 * 1000) - -#define MIN_SLEEP_TIME_US 50 -#define MAX_SLEEP_TIME_US 100 #define HAS_BSR BIT(5) #define HAS_CONFIG_ID BIT(3) @@ -292,6 +288,7 @@ struct f34v7_data { const void *config_data; const void *image; + struct completion cmd_done; }; struct f34_data { diff --git a/drivers/input/rmi4/rmi_f34v7.c b/drivers/input/rmi4/rmi_f34v7.c index 56c6c39ad31e..10c0d11b72c9 100644 --- a/drivers/input/rmi4/rmi_f34v7.c +++ b/drivers/input/rmi4/rmi_f34v7.c @@ -15,6 +15,7 @@ #include <asm/unaligned.h> #include <linux/delay.h> #include <linux/slab.h> +#include <linux/jiffies.h> #include "rmi_driver.h" #include "rmi_f34.h" @@ -31,7 +32,7 @@ static int rmi_f34v7_read_flash_status(struct f34_data *f34) sizeof(status)); if (ret < 0) { rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev, - "%s: Failed to read flash status\n", __func__); + "%s: Error %d reading flash status\n", __func__, ret); return ret; } @@ -60,28 +61,17 @@ static int rmi_f34v7_read_flash_status(struct f34_data *f34) static int rmi_f34v7_wait_for_idle(struct f34_data *f34, int timeout_ms) { - int count = 0; - int timeout_count = ((timeout_ms * 1000) / MAX_SLEEP_TIME_US) + 1; + unsigned long timeout; - do { - usleep_range(MIN_SLEEP_TIME_US, MAX_SLEEP_TIME_US); - - count++; - - rmi_f34v7_read_flash_status(f34); - - if ((f34->v7.command == v7_CMD_IDLE) - && (f34->v7.flash_status == 0x00)) { - rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev, - "Idle status detected\n"); - return 0; - } - } while (count < timeout_count); + timeout = msecs_to_jiffies(timeout_ms); - dev_err(&f34->fn->dev, - "%s: Timed out waiting for idle status\n", __func__); + if (!wait_for_completion_timeout(&f34->v7.cmd_done, timeout)) { + dev_warn(&f34->fn->dev, "%s: Timed out waiting for idle status\n", + __func__); + return -ETIMEDOUT; + } - return -ETIMEDOUT; + return 0; } static int rmi_f34v7_write_command_single_transaction(struct f34_data *f34, @@ -285,9 +275,10 @@ static int rmi_f34v7_write_partition_id(struct f34_data *f34, u8 cmd) return 0; } -static int rmi_f34v7_read_f34v7_partition_table(struct f34_data *f34) +static int rmi_f34v7_read_partition_table(struct f34_data *f34) { int ret; + unsigned long timeout; u8 base; __le16 length; u16 block_number = 0; @@ -320,6 +311,8 @@ static int rmi_f34v7_read_f34v7_partition_table(struct f34_data *f34) return ret; } + init_completion(&f34->v7.cmd_done); + ret = rmi_f34v7_write_command(f34, v7_CMD_READ_CONFIG); if (ret < 0) { dev_err(&f34->fn->dev, "%s: Failed to write command\n", @@ -327,11 +320,15 @@ static int rmi_f34v7_read_f34v7_partition_table(struct f34_data *f34) return ret; } - ret = rmi_f34v7_wait_for_idle(f34, WRITE_WAIT_MS); - if (ret < 0) { - dev_err(&f34->fn->dev, "%s: Failed to wait for idle status\n", - __func__); - return ret; + timeout = msecs_to_jiffies(F34_WRITE_WAIT_MS); + while (time_before(jiffies, timeout)) { + usleep_range(5000, 6000); + rmi_f34v7_read_flash_status(f34); + + if (f34->v7.command == v7_CMD_IDLE && + f34->v7.flash_status == 0x00) { + break; + } } ret = rmi_read_block(f34->fn->rmi_dev, @@ -570,7 +567,7 @@ static int rmi_f34v7_read_queries(struct f34_data *f34) f34->v7.read_config_buf_size = f34->v7.partition_table_bytes; ptable = f34->v7.read_config_buf; - ret = rmi_f34v7_read_f34v7_partition_table(f34); + ret = rmi_f34v7_read_partition_table(f34); if (ret < 0) { dev_err(&f34->fn->dev, "%s: Failed to read partition table\n", __func__); @@ -666,6 +663,8 @@ static int rmi_f34v7_erase_config(struct f34_data *f34) dev_info(&f34->fn->dev, "Erasing config...\n"); + init_completion(&f34->v7.cmd_done); + switch (f34->v7.config_area) { case v7_UI_CONFIG_AREA: ret = rmi_f34v7_write_command(f34, v7_CMD_ERASE_UI_CONFIG); @@ -684,11 +683,11 @@ static int rmi_f34v7_erase_config(struct f34_data *f34) break; } - ret = rmi_f34v7_wait_for_idle(f34, ENABLE_WAIT_MS); + ret = rmi_f34v7_wait_for_idle(f34, F34_ERASE_WAIT_MS); if (ret < 0) return ret; - return ret; + return 0; } static int rmi_f34v7_erase_guest_code(struct f34_data *f34) @@ -697,11 +696,13 @@ static int rmi_f34v7_erase_guest_code(struct f34_data *f34) dev_info(&f34->fn->dev, "Erasing guest code...\n"); + init_completion(&f34->v7.cmd_done); + ret = rmi_f34v7_write_command(f34, v7_CMD_ERASE_GUEST_CODE); if (ret < 0) return ret; - ret = rmi_f34v7_wait_for_idle(f34, ENABLE_WAIT_MS); + ret = rmi_f34v7_wait_for_idle(f34, F34_ERASE_WAIT_MS); if (ret < 0) return ret; @@ -714,11 +715,13 @@ static int rmi_f34v7_erase_all(struct f34_data *f34) dev_info(&f34->fn->dev, "Erasing firmware...\n"); + init_completion(&f34->v7.cmd_done); + ret = rmi_f34v7_write_command(f34, v7_CMD_ERASE_UI_FIRMWARE); if (ret < 0) return ret; - ret = rmi_f34v7_wait_for_idle(f34, ENABLE_WAIT_MS); + ret = rmi_f34v7_wait_for_idle(f34, F34_ERASE_WAIT_MS); if (ret < 0) return ret; @@ -743,8 +746,8 @@ static int rmi_f34v7_erase_all(struct f34_data *f34) return 0; } -static int rmi_f34v7_read_f34v7_blocks(struct f34_data *f34, u16 block_cnt, - u8 command) +static int rmi_f34v7_read_blocks(struct f34_data *f34, + u16 block_cnt, u8 command) { int ret; u8 base; @@ -787,17 +790,15 @@ static int rmi_f34v7_read_f34v7_blocks(struct f34_data *f34, u16 block_cnt, return ret; } + init_completion(&f34->v7.cmd_done); + ret = rmi_f34v7_write_command(f34, command); if (ret < 0) return ret; - ret = rmi_f34v7_wait_for_idle(f34, ENABLE_WAIT_MS); - if (ret < 0) { - dev_err(&f34->fn->dev, - "%s: Wait for idle failed (%d blks remaining)\n", - __func__, remaining); + ret = rmi_f34v7_wait_for_idle(f34, F34_ENABLE_WAIT_MS); + if (ret < 0) return ret; - } ret = rmi_read_block(f34->fn->rmi_dev, base + f34->v7.off.payload, @@ -853,6 +854,8 @@ static int rmi_f34v7_write_f34v7_blocks(struct f34_data *f34, transfer = min(remaining, max_transfer); put_unaligned_le16(transfer, &length); + init_completion(&f34->v7.cmd_done); + ret = rmi_write_block(f34->fn->rmi_dev, base + f34->v7.off.transfer_length, &length, sizeof(length)); @@ -877,13 +880,9 @@ static int rmi_f34v7_write_f34v7_blocks(struct f34_data *f34, return ret; } - ret = rmi_f34v7_wait_for_idle(f34, ENABLE_WAIT_MS); - if (ret < 0) { - dev_err(&f34->fn->dev, - "%s: Failed wait for idle (%d blks remaining)\n", - __func__, remaining); + ret = rmi_f34v7_wait_for_idle(f34, F34_ENABLE_WAIT_MS); + if (ret < 0) return ret; - } block_ptr += (transfer * f34->v7.block_size); remaining -= transfer; @@ -945,6 +944,8 @@ static int rmi_f34v7_write_flash_config(struct f34_data *f34) return -EINVAL; } + init_completion(&f34->v7.cmd_done); + ret = rmi_f34v7_write_command(f34, v7_CMD_ERASE_FLASH_CONFIG); if (ret < 0) return ret; @@ -952,7 +953,7 @@ static int rmi_f34v7_write_flash_config(struct f34_data *f34) rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev, "%s: Erase flash config command written\n", __func__); - ret = rmi_f34v7_wait_for_idle(f34, ENABLE_WAIT_MS); + ret = rmi_f34v7_wait_for_idle(f34, F34_WRITE_WAIT_MS); if (ret < 0) return ret; @@ -981,7 +982,7 @@ static int rmi_f34v7_write_partition_table(struct f34_data *f34) f34->v7.read_config_buf_size = f34->v7.config_size; - ret = rmi_f34v7_read_f34v7_blocks(f34, block_count, v7_CMD_READ_CONFIG); + ret = rmi_f34v7_read_blocks(f34, block_count, v7_CMD_READ_CONFIG); if (ret < 0) return ret; @@ -1287,6 +1288,8 @@ static int rmi_f34v7_enter_flash_prog(struct f34_data *f34) { int ret; + f34->fn->rmi_dev->driver->set_irq_bits(f34->fn->rmi_dev, f34->fn->irq_mask); + ret = rmi_f34v7_read_flash_status(f34); if (ret < 0) return ret; @@ -1294,19 +1297,16 @@ static int rmi_f34v7_enter_flash_prog(struct f34_data *f34) if (f34->v7.in_bl_mode) return 0; + init_completion(&f34->v7.cmd_done); + ret = rmi_f34v7_write_command(f34, v7_CMD_ENABLE_FLASH_PROG); if (ret < 0) return ret; - ret = rmi_f34v7_wait_for_idle(f34, ENABLE_WAIT_MS); + ret = rmi_f34v7_wait_for_idle(f34, F34_ENABLE_WAIT_MS); if (ret < 0) return ret; - if (!f34->v7.in_bl_mode) { - dev_err(&f34->fn->dev, "%s: BL mode not entered\n", __func__); - return -EINVAL; - } - return 0; } @@ -1314,6 +1314,8 @@ int rmi_f34v7_start_reflash(struct f34_data *f34, const struct firmware *fw) { int ret = 0; + f34->fn->rmi_dev->driver->set_irq_bits(f34->fn->rmi_dev, f34->fn->irq_mask); + f34->v7.config_area = v7_UI_CONFIG_AREA; f34->v7.image = fw->data; @@ -1376,8 +1378,13 @@ int rmi_f34v7_probe(struct f34_data *f34) memset(&f34->v7.blkcount, 0x00, sizeof(f34->v7.blkcount)); memset(&f34->v7.phyaddr, 0x00, sizeof(f34->v7.phyaddr)); - rmi_f34v7_read_queries(f34); - f34->v7.force_update = false; + init_completion(&f34->v7.cmd_done); + + ret = rmi_f34v7_read_queries(f34); + if (ret < 0) + return ret; + + f34->v7.force_update = true; return 0; } diff --git a/drivers/input/rmi4/rmi_i2c.c b/drivers/input/rmi4/rmi_i2c.c index 082306d7c207..e28663ef9e5a 100644 --- a/drivers/input/rmi4/rmi_i2c.c +++ b/drivers/input/rmi4/rmi_i2c.c @@ -204,7 +204,7 @@ static int rmi_i2c_probe(struct i2c_client *client, struct rmi_device_platform_data *client_pdata = dev_get_platdata(&client->dev); struct rmi_i2c_xport *rmi_i2c; - int retval; + int error; rmi_i2c = devm_kzalloc(&client->dev, sizeof(struct rmi_i2c_xport), GFP_KERNEL); @@ -220,30 +220,31 @@ static int rmi_i2c_probe(struct i2c_client *client, rmi_dbg(RMI_DEBUG_XPORT, &client->dev, "Probing %s.\n", dev_name(&client->dev)); + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { dev_err(&client->dev, - "adapter does not support required functionality.\n"); + "adapter does not support required functionality\n"); return -ENODEV; } rmi_i2c->supplies[0].supply = "vdd"; rmi_i2c->supplies[1].supply = "vio"; - retval = devm_regulator_bulk_get(&client->dev, + error = devm_regulator_bulk_get(&client->dev, ARRAY_SIZE(rmi_i2c->supplies), rmi_i2c->supplies); - if (retval < 0) - return retval; + if (error < 0) + return error; - retval = regulator_bulk_enable(ARRAY_SIZE(rmi_i2c->supplies), + error = regulator_bulk_enable(ARRAY_SIZE(rmi_i2c->supplies), rmi_i2c->supplies); - if (retval < 0) - return retval; + if (error < 0) + return error; - retval = devm_add_action_or_reset(&client->dev, + error = devm_add_action_or_reset(&client->dev, rmi_i2c_regulator_bulk_disable, rmi_i2c); - if (retval) - return retval; + if (error) + return error; of_property_read_u32(client->dev.of_node, "syna,startup-delay-ms", &rmi_i2c->startup_delay); @@ -263,26 +264,26 @@ static int rmi_i2c_probe(struct i2c_client *client, * Setting the page to zero will (a) make sure the PSR is in a * known state, and (b) make sure we can talk to the device. */ - retval = rmi_set_page(rmi_i2c, 0); - if (retval) { - dev_err(&client->dev, "Failed to set page select to 0.\n"); - return retval; + error = rmi_set_page(rmi_i2c, 0); + if (error) { + dev_err(&client->dev, "Failed to set page select to 0\n"); + return error; } - retval = rmi_register_transport_device(&rmi_i2c->xport); - if (retval) { - dev_err(&client->dev, "Failed to register transport driver at 0x%.2X.\n", - client->addr); - return retval; + dev_info(&client->dev, "registering I2C-connected sensor\n"); + + error = rmi_register_transport_device(&rmi_i2c->xport); + if (error) { + dev_err(&client->dev, "failed to register sensor: %d\n", error); + return error; } - retval = devm_add_action_or_reset(&client->dev, + + error = devm_add_action_or_reset(&client->dev, rmi_i2c_unregister_transport, rmi_i2c); - if (retval) - return retval; + if (error) + return error; - dev_info(&client->dev, "registered rmi i2c driver at %#04x.\n", - client->addr); return 0; } diff --git a/drivers/input/rmi4/rmi_smbus.c b/drivers/input/rmi4/rmi_smbus.c index 76752555d809..225025a0940c 100644 --- a/drivers/input/rmi4/rmi_smbus.c +++ b/drivers/input/rmi4/rmi_smbus.c @@ -53,6 +53,7 @@ static int rmi_smb_get_version(struct rmi_smb_xport *rmi_smb) dev_err(&client->dev, "failed to get SMBus version number!\n"); return retval; } + return retval + 1; } @@ -83,63 +84,56 @@ static int rmi_smb_get_command_code(struct rmi_transport_dev *xport, { struct rmi_smb_xport *rmi_smb = container_of(xport, struct rmi_smb_xport, xport); + struct mapping_table_entry new_map; int i; - int retval; - struct mapping_table_entry mapping_data[1]; + int retval = 0; mutex_lock(&rmi_smb->mappingtable_mutex); + for (i = 0; i < RMI_SMB2_MAP_SIZE; i++) { - if (rmi_smb->mapping_table[i].rmiaddr == rmiaddr) { + struct mapping_table_entry *entry = &rmi_smb->mapping_table[i]; + + if (le16_to_cpu(entry->rmiaddr) == rmiaddr) { if (isread) { - if (rmi_smb->mapping_table[i].readcount - == bytecount) { - *commandcode = i; - retval = 0; + if (entry->readcount == bytecount) goto exit; - } } else { - if (rmi_smb->mapping_table[i].flags & - RMI_SMB2_MAP_FLAGS_WE) { - *commandcode = i; - retval = 0; + if (entry->flags & RMI_SMB2_MAP_FLAGS_WE) { goto exit; } } } } + i = rmi_smb->table_index; rmi_smb->table_index = (i + 1) % RMI_SMB2_MAP_SIZE; /* constructs mapping table data entry. 4 bytes each entry */ - memset(mapping_data, 0, sizeof(mapping_data)); - - mapping_data[0].rmiaddr = cpu_to_le16(rmiaddr); - mapping_data[0].readcount = bytecount; - mapping_data[0].flags = !isread ? RMI_SMB2_MAP_FLAGS_WE : 0; - - retval = smb_block_write(xport, i + 0x80, mapping_data, - sizeof(mapping_data)); + memset(&new_map, 0, sizeof(new_map)); + new_map.rmiaddr = cpu_to_le16(rmiaddr); + new_map.readcount = bytecount; + new_map.flags = !isread ? RMI_SMB2_MAP_FLAGS_WE : 0; + retval = smb_block_write(xport, i + 0x80, &new_map, sizeof(new_map)); if (retval < 0) { /* * if not written to device mapping table * clear the driver mapping table records */ - rmi_smb->mapping_table[i].rmiaddr = 0x0000; - rmi_smb->mapping_table[i].readcount = 0; - rmi_smb->mapping_table[i].flags = 0; - goto exit; + memset(&new_map, 0, sizeof(new_map)); } + /* save to the driver level mapping table */ - rmi_smb->mapping_table[i].rmiaddr = rmiaddr; - rmi_smb->mapping_table[i].readcount = bytecount; - rmi_smb->mapping_table[i].flags = !isread ? RMI_SMB2_MAP_FLAGS_WE : 0; - *commandcode = i; + rmi_smb->mapping_table[i] = new_map; exit: mutex_unlock(&rmi_smb->mappingtable_mutex); - return retval; + if (retval < 0) + return retval; + + *commandcode = i; + return 0; } static int rmi_smb_write_block(struct rmi_transport_dev *xport, u16 rmiaddr, @@ -282,19 +276,24 @@ static int rmi_smb_probe(struct i2c_client *client, { struct rmi_device_platform_data *pdata = dev_get_platdata(&client->dev); struct rmi_smb_xport *rmi_smb; - int retval; int smbus_version; + int error; + + if (!pdata) { + dev_err(&client->dev, "no platform data, aborting\n"); + return -ENOMEM; + } if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_HOST_NOTIFY)) { dev_err(&client->dev, - "adapter does not support required functionality.\n"); + "adapter does not support required functionality\n"); return -ENODEV; } if (client->irq <= 0) { - dev_err(&client->dev, "no IRQ provided, giving up.\n"); + dev_err(&client->dev, "no IRQ provided, giving up\n"); return client->irq ? client->irq : -ENODEV; } @@ -303,12 +302,7 @@ static int rmi_smb_probe(struct i2c_client *client, if (!rmi_smb) return -ENOMEM; - if (!pdata) { - dev_err(&client->dev, "no platform data, aborting\n"); - return -ENOMEM; - } - - rmi_dbg(RMI_DEBUG_XPORT, &client->dev, "Probing %s.\n", + rmi_dbg(RMI_DEBUG_XPORT, &client->dev, "Probing %s\n", dev_name(&client->dev)); rmi_smb->client = client; @@ -321,34 +315,30 @@ static int rmi_smb_probe(struct i2c_client *client, rmi_smb->xport.proto_name = "smb2"; rmi_smb->xport.ops = &rmi_smb_ops; - retval = rmi_smb_get_version(rmi_smb); - if (retval < 0) - return retval; + smbus_version = rmi_smb_get_version(rmi_smb); + if (smbus_version < 0) + return smbus_version; - smbus_version = retval; rmi_dbg(RMI_DEBUG_XPORT, &client->dev, "Smbus version is %d", smbus_version); if (smbus_version != 2) { - dev_err(&client->dev, "Unrecognized SMB version %d.\n", + dev_err(&client->dev, "Unrecognized SMB version %d\n", smbus_version); return -ENODEV; } i2c_set_clientdata(client, rmi_smb); - retval = rmi_register_transport_device(&rmi_smb->xport); - if (retval) { - dev_err(&client->dev, "Failed to register transport driver at 0x%.2X.\n", - client->addr); - i2c_set_clientdata(client, NULL); - return retval; + dev_info(&client->dev, "registering SMbus-connected sensor\n"); + + error = rmi_register_transport_device(&rmi_smb->xport); + if (error) { + dev_err(&client->dev, "failed to register sensor: %d\n", error); + return error; } - dev_info(&client->dev, "registered rmi smb driver at %#04x.\n", - client->addr); return 0; - } static int rmi_smb_remove(struct i2c_client *client) diff --git a/drivers/input/rmi4/rmi_spi.c b/drivers/input/rmi4/rmi_spi.c index 69548d7d1f10..d97a85907ed6 100644 --- a/drivers/input/rmi4/rmi_spi.c +++ b/drivers/input/rmi4/rmi_spi.c @@ -370,7 +370,7 @@ static int rmi_spi_probe(struct spi_device *spi) struct rmi_spi_xport *rmi_spi; struct rmi_device_platform_data *pdata; struct rmi_device_platform_data *spi_pdata = spi->dev.platform_data; - int retval; + int error; if (spi->master->flags & SPI_MASTER_HALF_DUPLEX) return -EINVAL; @@ -383,9 +383,9 @@ static int rmi_spi_probe(struct spi_device *spi) pdata = &rmi_spi->xport.pdata; if (spi->dev.of_node) { - retval = rmi_spi_of_probe(spi, pdata); - if (retval) - return retval; + error = rmi_spi_of_probe(spi, pdata); + if (error) + return error; } else if (spi_pdata) { *pdata = *spi_pdata; } @@ -396,10 +396,10 @@ static int rmi_spi_probe(struct spi_device *spi) if (pdata->spi_data.mode) spi->mode = pdata->spi_data.mode; - retval = spi_setup(spi); - if (retval < 0) { + error = spi_setup(spi); + if (error < 0) { dev_err(&spi->dev, "spi_setup failed!\n"); - return retval; + return error; } pdata->irq = spi->irq; @@ -413,32 +413,34 @@ static int rmi_spi_probe(struct spi_device *spi) spi_set_drvdata(spi, rmi_spi); - retval = rmi_spi_manage_pools(rmi_spi, RMI_SPI_DEFAULT_XFER_BUF_SIZE); - if (retval) - return retval; + error = rmi_spi_manage_pools(rmi_spi, RMI_SPI_DEFAULT_XFER_BUF_SIZE); + if (error) + return error; /* * Setting the page to zero will (a) make sure the PSR is in a * known state, and (b) make sure we can talk to the device. */ - retval = rmi_set_page(rmi_spi, 0); - if (retval) { + error = rmi_set_page(rmi_spi, 0); + if (error) { dev_err(&spi->dev, "Failed to set page select to 0.\n"); - return retval; + return error; } - retval = rmi_register_transport_device(&rmi_spi->xport); - if (retval) { - dev_err(&spi->dev, "failed to register transport.\n"); - return retval; + dev_info(&spi->dev, "registering SPI-connected sensor\n"); + + error = rmi_register_transport_device(&rmi_spi->xport); + if (error) { + dev_err(&spi->dev, "failed to register sensor: %d\n", error); + return error; } - retval = devm_add_action_or_reset(&spi->dev, + + error = devm_add_action_or_reset(&spi->dev, rmi_spi_unregister_transport, rmi_spi); - if (retval) - return retval; + if (error) + return error; - dev_info(&spi->dev, "registered RMI SPI driver\n"); return 0; } diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c index 1ca7f551e2da..30d6230d48f7 100644 --- a/drivers/input/serio/serio.c +++ b/drivers/input/serio/serio.c @@ -285,8 +285,8 @@ static int serio_queue_event(void *object, struct module *owner, } if (!try_module_get(owner)) { - pr_warning("Can't get module reference, dropping event %d\n", - event_type); + pr_warn("Can't get module reference, dropping event %d\n", + event_type); kfree(event); retval = -EINVAL; goto out; @@ -823,8 +823,8 @@ static void serio_attach_driver(struct serio_driver *drv) error = driver_attach(&drv->driver); if (error) - pr_warning("driver_attach() failed for %s with error %d\n", - drv->driver.name, error); + pr_warn("driver_attach() failed for %s with error %d\n", + drv->driver.name, error); } int __serio_register_driver(struct serio_driver *drv, struct module *owner, const char *mod_name) @@ -953,12 +953,24 @@ static int serio_suspend(struct device *dev) static int serio_resume(struct device *dev) { struct serio *serio = to_serio_port(dev); + int error = -ENOENT; - /* - * Driver reconnect can take a while, so better let kseriod - * deal with it. - */ - serio_queue_event(serio, NULL, SERIO_RECONNECT_PORT); + mutex_lock(&serio->drv_mutex); + if (serio->drv && serio->drv->fast_reconnect) { + error = serio->drv->fast_reconnect(serio); + if (error && error != -ENOENT) + dev_warn(dev, "fast reconnect failed with error %d\n", + error); + } + mutex_unlock(&serio->drv_mutex); + + if (error) { + /* + * Driver reconnect can take a while, so better let + * kseriod deal with it. + */ + serio_queue_event(serio, NULL, SERIO_RECONNECT_PORT); + } return 0; } diff --git a/drivers/input/sparse-keymap.c b/drivers/input/sparse-keymap.c index e7409c45bdd0..12a3ad83296d 100644 --- a/drivers/input/sparse-keymap.c +++ b/drivers/input/sparse-keymap.c @@ -160,12 +160,12 @@ static int sparse_keymap_setkeycode(struct input_dev *dev, * @keymap: Keymap in form of array of &key_entry structures ending * with %KE_END type entry * @setup: Function that can be used to adjust keymap entries - * depending on device's deeds, may be %NULL + * depending on device's needs, may be %NULL * * The function calculates size and allocates copy of the original * keymap after which sets up input device event bits appropriately. - * Before destroying input device allocated keymap should be freed - * with a call to sparse_keymap_free(). + * The allocated copy of the keymap is automatically freed when it + * is no longer needed. */ int sparse_keymap_setup(struct input_dev *dev, const struct key_entry *keymap, @@ -180,19 +180,18 @@ int sparse_keymap_setup(struct input_dev *dev, for (e = keymap; e->type != KE_END; e++) map_size++; - map = kcalloc(map_size, sizeof(struct key_entry), GFP_KERNEL); + map = devm_kmemdup(&dev->dev, keymap, map_size * sizeof(*map), + GFP_KERNEL); if (!map) return -ENOMEM; - memcpy(map, keymap, map_size * sizeof(struct key_entry)); - for (i = 0; i < map_size; i++) { entry = &map[i]; if (setup) { error = setup(dev, entry); if (error) - goto err_out; + return error; } switch (entry->type) { @@ -221,10 +220,6 @@ int sparse_keymap_setup(struct input_dev *dev, dev->setkeycode = sparse_keymap_setkeycode; return 0; - - err_out: - kfree(map); - return error; } EXPORT_SYMBOL(sparse_keymap_setup); @@ -232,29 +227,13 @@ EXPORT_SYMBOL(sparse_keymap_setup); * sparse_keymap_free - free memory allocated for sparse keymap * @dev: Input device using sparse keymap * - * This function is used to free memory allocated by sparse keymap + * This function used to free memory allocated by sparse keymap * in an input device that was set up by sparse_keymap_setup(). - * NOTE: It is safe to cal this function while input device is - * still registered (however the drivers should care not to try to - * use freed keymap and thus have to shut off interrupts/polling - * before freeing the keymap). + * Since sparse_keymap_setup() now uses a managed allocation for the + * keymap copy, use of this function is deprecated. */ void sparse_keymap_free(struct input_dev *dev) { - unsigned long flags; - - /* - * Take event lock to prevent racing with input_get_keycode() - * and input_set_keycode() if we are called while input device - * is still registered. - */ - spin_lock_irqsave(&dev->event_lock, flags); - - kfree(dev->keycode); - dev->keycode = NULL; - dev->keycodemax = 0; - - spin_unlock_irqrestore(&dev->event_lock, flags); } EXPORT_SYMBOL(sparse_keymap_free); diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 52458cfdf017..cf26ca49ae6d 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -73,6 +73,7 @@ config TOUCHSCREEN_AD7879 config TOUCHSCREEN_AD7879_I2C tristate "support I2C bus connection" depends on TOUCHSCREEN_AD7879 && I2C + select REGMAP_I2C help Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus. @@ -82,6 +83,7 @@ config TOUCHSCREEN_AD7879_I2C config TOUCHSCREEN_AD7879_SPI tristate "support SPI bus connection" depends on TOUCHSCREEN_AD7879 && SPI_MASTER + select REGMAP_SPI help Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus. @@ -91,11 +93,11 @@ config TOUCHSCREEN_AD7879_SPI module will be called ad7879-spi. config TOUCHSCREEN_AR1021_I2C - tristate "Microchip AR1021 i2c touchscreen" + tristate "Microchip AR1020/1021 i2c touchscreen" depends on I2C && OF help - Say Y here if you have the Microchip AR1021 touchscreen controller - chip in your system. + Say Y here if you have the Microchip AR1020 or AR1021 touchscreen + controller chip in your system. If unsure, say N. @@ -1033,6 +1035,16 @@ config TOUCHSCREEN_TSC2007 To compile this driver as a module, choose M here: the module will be called tsc2007. +config TOUCHSCREEN_TSC2007_IIO + bool "IIO interface for external ADC input and temperature" + depends on TOUCHSCREEN_TSC2007 + depends on IIO=y || IIO=TOUCHSCREEN_TSC2007 + help + Saying Y here adds an iio interface to the tsc2007 which + provides values for the AUX input (used for e.g. battery + or ambient light monitoring), temperature and raw input + values. + config TOUCHSCREEN_W90X900 tristate "W90P910 touchscreen driver" depends on ARCH_W90X900 diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 96761ce2ee6d..18e476948e44 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -80,6 +80,8 @@ obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO) += tsc40.o obj-$(CONFIG_TOUCHSCREEN_TSC200X_CORE) += tsc200x-core.o obj-$(CONFIG_TOUCHSCREEN_TSC2004) += tsc2004.o obj-$(CONFIG_TOUCHSCREEN_TSC2005) += tsc2005.o +tsc2007-y := tsc2007_core.o +tsc2007-$(CONFIG_TOUCHSCREEN_TSC2007_IIO) += tsc2007_iio.o obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.o diff --git a/drivers/input/touchscreen/ad7879-i2c.c b/drivers/input/touchscreen/ad7879-i2c.c index 58f72e0246ab..49b902b10c5f 100644 --- a/drivers/input/touchscreen/ad7879-i2c.c +++ b/drivers/input/touchscreen/ad7879-i2c.c @@ -12,53 +12,22 @@ #include <linux/types.h> #include <linux/of.h> #include <linux/pm.h> +#include <linux/regmap.h> #include "ad7879.h" #define AD7879_DEVID 0x79 /* AD7879-1/AD7889-1 */ -/* All registers are word-sized. - * AD7879 uses a high-byte first convention. - */ -static int ad7879_i2c_read(struct device *dev, u8 reg) -{ - struct i2c_client *client = to_i2c_client(dev); - - return i2c_smbus_read_word_swapped(client, reg); -} - -static int ad7879_i2c_multi_read(struct device *dev, - u8 first_reg, u8 count, u16 *buf) -{ - struct i2c_client *client = to_i2c_client(dev); - u8 idx; - - i2c_smbus_read_i2c_block_data(client, first_reg, count * 2, (u8 *)buf); - - for (idx = 0; idx < count; ++idx) - buf[idx] = swab16(buf[idx]); - - return 0; -} - -static int ad7879_i2c_write(struct device *dev, u8 reg, u16 val) -{ - struct i2c_client *client = to_i2c_client(dev); - - return i2c_smbus_write_word_swapped(client, reg, val); -} - -static const struct ad7879_bus_ops ad7879_i2c_bus_ops = { - .bustype = BUS_I2C, - .read = ad7879_i2c_read, - .multi_read = ad7879_i2c_multi_read, - .write = ad7879_i2c_write, +static const struct regmap_config ad7879_i2c_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .max_register = 15, }; static int ad7879_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { - struct ad7879 *ts; + struct regmap *regmap; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) { @@ -66,23 +35,12 @@ static int ad7879_i2c_probe(struct i2c_client *client, return -EIO; } - ts = ad7879_probe(&client->dev, AD7879_DEVID, client->irq, - &ad7879_i2c_bus_ops); - if (IS_ERR(ts)) - return PTR_ERR(ts); - - i2c_set_clientdata(client, ts); - - return 0; -} - -static int ad7879_i2c_remove(struct i2c_client *client) -{ - struct ad7879 *ts = i2c_get_clientdata(client); - - ad7879_remove(ts); + regmap = devm_regmap_init_i2c(client, &ad7879_i2c_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); - return 0; + return ad7879_probe(&client->dev, regmap, client->irq, + BUS_I2C, AD7879_DEVID); } static const struct i2c_device_id ad7879_id[] = { @@ -107,12 +65,11 @@ static struct i2c_driver ad7879_i2c_driver = { .of_match_table = of_match_ptr(ad7879_i2c_dt_ids), }, .probe = ad7879_i2c_probe, - .remove = ad7879_i2c_remove, .id_table = ad7879_id, }; module_i2c_driver(ad7879_i2c_driver); -MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); MODULE_DESCRIPTION("AD7879(-1) touchscreen I2C bus driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/ad7879-spi.c b/drivers/input/touchscreen/ad7879-spi.c index d42b6b9af191..3457a5626d75 100644 --- a/drivers/input/touchscreen/ad7879-spi.c +++ b/drivers/input/touchscreen/ad7879-spi.c @@ -11,110 +11,28 @@ #include <linux/spi/spi.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/regmap.h> #include "ad7879.h" #define AD7879_DEVID 0x7A /* AD7879/AD7889 */ #define MAX_SPI_FREQ_HZ 5000000 -#define AD7879_CMD_MAGIC 0xE000 -#define AD7879_CMD_READ (1 << 10) -#define AD7879_CMD(reg) (AD7879_CMD_MAGIC | ((reg) & 0xF)) -#define AD7879_WRITECMD(reg) (AD7879_CMD(reg)) -#define AD7879_READCMD(reg) (AD7879_CMD(reg) | AD7879_CMD_READ) -/* - * ad7879_read/write are only used for initial setup and for sysfs controls. - * The main traffic is done in ad7879_collect(). - */ - -static int ad7879_spi_xfer(struct spi_device *spi, - u16 cmd, u8 count, u16 *tx_buf, u16 *rx_buf) -{ - struct spi_message msg; - struct spi_transfer *xfers; - void *spi_data; - u16 *command; - u16 *_rx_buf = _rx_buf; /* shut gcc up */ - u8 idx; - int ret; - - xfers = spi_data = kzalloc(sizeof(*xfers) * (count + 2), GFP_KERNEL); - if (!spi_data) - return -ENOMEM; - - spi_message_init(&msg); - - command = spi_data; - command[0] = cmd; - if (count == 1) { - /* ad7879_spi_{read,write} gave us buf on stack */ - command[1] = *tx_buf; - tx_buf = &command[1]; - _rx_buf = rx_buf; - rx_buf = &command[2]; - } - - ++xfers; - xfers[0].tx_buf = command; - xfers[0].len = 2; - spi_message_add_tail(&xfers[0], &msg); - ++xfers; - - for (idx = 0; idx < count; ++idx) { - if (rx_buf) - xfers[idx].rx_buf = &rx_buf[idx]; - if (tx_buf) - xfers[idx].tx_buf = &tx_buf[idx]; - xfers[idx].len = 2; - spi_message_add_tail(&xfers[idx], &msg); - } - - ret = spi_sync(spi, &msg); - - if (count == 1) - _rx_buf[0] = command[2]; - - kfree(spi_data); - - return ret; -} - -static int ad7879_spi_multi_read(struct device *dev, - u8 first_reg, u8 count, u16 *buf) -{ - struct spi_device *spi = to_spi_device(dev); +#define AD7879_CMD_MAGIC 0xE0 +#define AD7879_CMD_READ BIT(2) - return ad7879_spi_xfer(spi, AD7879_READCMD(first_reg), count, NULL, buf); -} - -static int ad7879_spi_read(struct device *dev, u8 reg) -{ - struct spi_device *spi = to_spi_device(dev); - u16 ret, dummy; - - return ad7879_spi_xfer(spi, AD7879_READCMD(reg), 1, &dummy, &ret) ? : ret; -} - -static int ad7879_spi_write(struct device *dev, u8 reg, u16 val) -{ - struct spi_device *spi = to_spi_device(dev); - u16 dummy; - - return ad7879_spi_xfer(spi, AD7879_WRITECMD(reg), 1, &val, &dummy); -} - -static const struct ad7879_bus_ops ad7879_spi_bus_ops = { - .bustype = BUS_SPI, - .read = ad7879_spi_read, - .multi_read = ad7879_spi_multi_read, - .write = ad7879_spi_write, +static const struct regmap_config ad7879_spi_regmap_config = { + .reg_bits = 16, + .val_bits = 16, + .max_register = 15, + .read_flag_mask = AD7879_CMD_MAGIC | AD7879_CMD_READ, + .write_flag_mask = AD7879_CMD_MAGIC, }; static int ad7879_spi_probe(struct spi_device *spi) { - struct ad7879 *ts; - int err; + struct regmap *regmap; /* don't exceed max specified SPI CLK frequency */ if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) { @@ -122,29 +40,11 @@ static int ad7879_spi_probe(struct spi_device *spi) return -EINVAL; } - spi->bits_per_word = 16; - err = spi_setup(spi); - if (err) { - dev_dbg(&spi->dev, "spi master doesn't support 16 bits/word\n"); - return err; - } - - ts = ad7879_probe(&spi->dev, AD7879_DEVID, spi->irq, &ad7879_spi_bus_ops); - if (IS_ERR(ts)) - return PTR_ERR(ts); - - spi_set_drvdata(spi, ts); - - return 0; -} - -static int ad7879_spi_remove(struct spi_device *spi) -{ - struct ad7879 *ts = spi_get_drvdata(spi); - - ad7879_remove(ts); + regmap = devm_regmap_init_spi(spi, &ad7879_spi_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); - return 0; + return ad7879_probe(&spi->dev, regmap, spi->irq, BUS_SPI, AD7879_DEVID); } #ifdef CONFIG_OF @@ -162,12 +62,11 @@ static struct spi_driver ad7879_spi_driver = { .of_match_table = of_match_ptr(ad7879_spi_dt_ids), }, .probe = ad7879_spi_probe, - .remove = ad7879_spi_remove, }; module_spi_driver(ad7879_spi_driver); -MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); MODULE_DESCRIPTION("AD7879(-1) touchscreen SPI bus driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("spi:ad7879"); diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c index e16a44667da7..196028c45210 100644 --- a/drivers/input/touchscreen/ad7879.c +++ b/drivers/input/touchscreen/ad7879.c @@ -26,9 +26,9 @@ #include <linux/input.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/property.h> +#include <linux/regmap.h> #include <linux/slab.h> -#include <linux/spi/spi.h> -#include <linux/i2c.h> #include <linux/gpio.h> #include <linux/input/touchscreen.h> @@ -106,8 +106,7 @@ enum { #define TS_PEN_UP_TIMEOUT msecs_to_jiffies(50) struct ad7879 { - const struct ad7879_bus_ops *bops; - + struct regmap *regmap; struct device *dev; struct input_dev *input; struct timer_list timer; @@ -137,17 +136,32 @@ struct ad7879 { static int ad7879_read(struct ad7879 *ts, u8 reg) { - return ts->bops->read(ts->dev, reg); -} + unsigned int val; + int error; -static int ad7879_multi_read(struct ad7879 *ts, u8 first_reg, u8 count, u16 *buf) -{ - return ts->bops->multi_read(ts->dev, first_reg, count, buf); + error = regmap_read(ts->regmap, reg, &val); + if (error) { + dev_err(ts->dev, "failed to read register %#02x: %d\n", + reg, error); + return error; + } + + return val; } static int ad7879_write(struct ad7879 *ts, u8 reg, u16 val) { - return ts->bops->write(ts->dev, reg, val); + int error; + + error = regmap_write(ts->regmap, reg, val); + if (error) { + dev_err(ts->dev, + "failed to write %#04x to register %#02x: %d\n", + val, reg, error); + return error; + } + + return 0; } static int ad7879_report(struct ad7879 *ts) @@ -234,7 +248,8 @@ static irqreturn_t ad7879_irq(int irq, void *handle) { struct ad7879 *ts = handle; - ad7879_multi_read(ts, AD7879_REG_XPLUS, AD7879_NR_SENSE, ts->conversion_data); + regmap_bulk_read(ts->regmap, AD7879_REG_XPLUS, + ts->conversion_data, AD7879_NR_SENSE); if (!ad7879_report(ts)) mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT); @@ -440,23 +455,34 @@ static void ad7879_gpio_set_value(struct gpio_chip *chip, static int ad7879_gpio_add(struct ad7879 *ts, const struct ad7879_platform_data *pdata) { + bool gpio_export; + int gpio_base; int ret = 0; + if (pdata) { + gpio_export = pdata->gpio_export; + gpio_base = pdata->gpio_base; + } else { + gpio_export = device_property_read_bool(ts->dev, + "gpio-controller"); + gpio_base = -1; + } + mutex_init(&ts->mutex); - if (pdata->gpio_export) { + if (gpio_export) { ts->gc.direction_input = ad7879_gpio_direction_input; ts->gc.direction_output = ad7879_gpio_direction_output; ts->gc.get = ad7879_gpio_get_value; ts->gc.set = ad7879_gpio_set_value; ts->gc.can_sleep = 1; - ts->gc.base = pdata->gpio_base; + ts->gc.base = gpio_base; ts->gc.ngpio = 1; ts->gc.label = "AD7879-GPIO"; ts->gc.owner = THIS_MODULE; ts->gc.parent = ts->dev; - ret = gpiochip_add_data(&ts->gc, ts); + ret = devm_gpiochip_add_data(ts->dev, &ts->gc, ts); if (ret) dev_err(ts->dev, "failed to register gpio %d\n", ts->gc.base); @@ -464,25 +490,12 @@ static int ad7879_gpio_add(struct ad7879 *ts, return ret; } - -static void ad7879_gpio_remove(struct ad7879 *ts) -{ - const struct ad7879_platform_data *pdata = dev_get_platdata(ts->dev); - - if (pdata && pdata->gpio_export) - gpiochip_remove(&ts->gc); - -} #else -static inline int ad7879_gpio_add(struct ad7879 *ts, - const struct ad7879_platform_data *pdata) +static int ad7879_gpio_add(struct ad7879 *ts, + const struct ad7879_platform_data *pdata) { return 0; } - -static inline void ad7879_gpio_remove(struct ad7879 *ts) -{ -} #endif static int ad7879_parse_dt(struct device *dev, struct ad7879 *ts) @@ -511,8 +524,15 @@ static int ad7879_parse_dt(struct device *dev, struct ad7879 *ts) return 0; } -struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq, - const struct ad7879_bus_ops *bops) +static void ad7879_cleanup_sysfs(void *_ts) +{ + struct ad7879 *ts = _ts; + + sysfs_remove_group(&ts->dev->kobj, &ad7879_attr_group); +} + +int ad7879_probe(struct device *dev, struct regmap *regmap, + int irq, u16 bustype, u8 devid) { struct ad7879_platform_data *pdata = dev_get_platdata(dev); struct ad7879 *ts; @@ -520,14 +540,14 @@ struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq, int err; u16 revid; - if (!irq) { + if (irq <= 0) { dev_err(dev, "No IRQ specified\n"); - return ERR_PTR(-EINVAL); + return -EINVAL; } ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL); if (!ts) - return ERR_PTR(-ENOMEM); + return -ENOMEM; if (pdata) { /* Platform data use swapped axis (backward compatibility) */ @@ -540,23 +560,22 @@ struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq, ts->averaging = pdata->averaging; ts->pen_down_acc_interval = pdata->pen_down_acc_interval; ts->median = pdata->median; - } else if (dev->of_node) { - ad7879_parse_dt(dev, ts); } else { - dev_err(dev, "No platform data\n"); - return ERR_PTR(-EINVAL); + err = ad7879_parse_dt(dev, ts); + if (err) + return err; } input_dev = devm_input_allocate_device(dev); if (!input_dev) { dev_err(dev, "Failed to allocate input device\n"); - return ERR_PTR(-ENOMEM); + return -ENOMEM; } - ts->bops = bops; ts->dev = dev; ts->input = input_dev; ts->irq = irq; + ts->regmap = regmap; setup_timer(&ts->timer, ad7879_timer, (unsigned long) ts); snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev)); @@ -564,20 +583,14 @@ struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq, input_dev->name = "AD7879 Touchscreen"; input_dev->phys = ts->phys; input_dev->dev.parent = dev; - input_dev->id.bustype = bops->bustype; + input_dev->id.bustype = bustype; input_dev->open = ad7879_open; input_dev->close = ad7879_close; input_set_drvdata(input_dev, ts); - __set_bit(EV_ABS, input_dev->evbit); - __set_bit(ABS_X, input_dev->absbit); - __set_bit(ABS_Y, input_dev->absbit); - __set_bit(ABS_PRESSURE, input_dev->absbit); - - __set_bit(EV_KEY, input_dev->evbit); - __set_bit(BTN_TOUCH, input_dev->keybit); + input_set_capability(input_dev, EV_KEY, BTN_TOUCH); if (pdata) { input_set_abs_params(input_dev, ABS_X, @@ -595,17 +608,18 @@ struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq, } else { input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0); input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0); + input_set_capability(input_dev, EV_ABS, ABS_PRESSURE); touchscreen_parse_properties(input_dev, false, NULL); if (!input_abs_get_max(input_dev, ABS_PRESSURE)) { dev_err(dev, "Touchscreen pressure is not specified\n"); - return ERR_PTR(-EINVAL); + return -EINVAL; } } err = ad7879_write(ts, AD7879_REG_CTRL2, AD7879_RESET); if (err < 0) { dev_err(dev, "Failed to write %s\n", input_dev->name); - return ERR_PTR(err); + return err; } revid = ad7879_read(ts, AD7879_REG_REVID); @@ -614,7 +628,7 @@ struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq, if (input_dev->id.product != devid) { dev_err(dev, "Failed to probe %s (%x vs %x)\n", input_dev->name, devid, revid); - return ERR_PTR(-ENODEV); + return -ENODEV; } ts->cmd_crtl3 = AD7879_YPLUS_BIT | @@ -639,43 +653,33 @@ struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq, dev_name(dev), ts); if (err) { dev_err(dev, "Failed to request IRQ: %d\n", err); - return ERR_PTR(err); + return err; } __ad7879_disable(ts); err = sysfs_create_group(&dev->kobj, &ad7879_attr_group); if (err) - goto err_out; + return err; - if (pdata) { - err = ad7879_gpio_add(ts, pdata); - if (err) - goto err_remove_attr; - } + err = devm_add_action_or_reset(dev, ad7879_cleanup_sysfs, ts); + if (err) + return err; + + err = ad7879_gpio_add(ts, pdata); + if (err) + return err; err = input_register_device(input_dev); if (err) - goto err_remove_gpio; + return err; - return ts; + dev_set_drvdata(dev, ts); -err_remove_gpio: - ad7879_gpio_remove(ts); -err_remove_attr: - sysfs_remove_group(&dev->kobj, &ad7879_attr_group); -err_out: - return ERR_PTR(err); + return 0; } EXPORT_SYMBOL(ad7879_probe); -void ad7879_remove(struct ad7879 *ts) -{ - ad7879_gpio_remove(ts); - sysfs_remove_group(&ts->dev->kobj, &ad7879_attr_group); -} -EXPORT_SYMBOL(ad7879_remove); - -MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); MODULE_DESCRIPTION("AD7879(-1) touchscreen Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/ad7879.h b/drivers/input/touchscreen/ad7879.h index 6fd13c48d373..7e43066a4b68 100644 --- a/drivers/input/touchscreen/ad7879.h +++ b/drivers/input/touchscreen/ad7879.h @@ -11,20 +11,12 @@ #include <linux/types.h> -struct ad7879; struct device; - -struct ad7879_bus_ops { - u16 bustype; - int (*read)(struct device *dev, u8 reg); - int (*multi_read)(struct device *dev, u8 first_reg, u8 count, u16 *buf); - int (*write)(struct device *dev, u8 reg, u16 val); -}; +struct regmap; extern const struct dev_pm_ops ad7879_pm_ops; -struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned irq, - const struct ad7879_bus_ops *bops); -void ad7879_remove(struct ad7879 *); +int ad7879_probe(struct device *dev, struct regmap *regmap, + int irq, u16 bustype, u8 devid); #endif diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index f5793e3d945f..735a0be1ad95 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -871,7 +871,7 @@ static irqreturn_t ads7846_irq(int irq, void *handle) msecs_to_jiffies(TS_POLL_PERIOD)); } - if (ts->pendown) { + if (ts->pendown && !ts->stopped) { struct input_dev *input = ts->input; input_report_key(input, BTN_TOUCH, 0); diff --git a/drivers/input/touchscreen/ar1021_i2c.c b/drivers/input/touchscreen/ar1021_i2c.c index 6562b17117f7..f9dcbd63e598 100644 --- a/drivers/input/touchscreen/ar1021_i2c.c +++ b/drivers/input/touchscreen/ar1021_i2c.c @@ -1,11 +1,12 @@ /* - * Microchip AR1021 driver for I2C + * Microchip AR1020 and AR1021 driver for I2C * * Author: Christian Gmeiner <christian.gmeiner@gmail.com> * * License: GPLv2 as published by the FSF. */ +#include <linux/bitops.h> #include <linux/module.h> #include <linux/input.h> #include <linux/of.h> @@ -18,6 +19,10 @@ #define AR1021_MAX_X 4095 #define AR1021_MAX_Y 4095 +#define AR1021_CMD 0x55 + +#define AR1021_CMD_ENABLE_TOUCH 0x12 + struct ar1021_i2c { struct i2c_client *client; struct input_dev *input; @@ -33,12 +38,12 @@ static irqreturn_t ar1021_i2c_irq(int irq, void *dev_id) int retval; retval = i2c_master_recv(ar1021->client, - ar1021->data, sizeof(ar1021->data)); + ar1021->data, sizeof(ar1021->data)); if (retval != sizeof(ar1021->data)) goto out; /* sync bit set ? */ - if ((data[0] & 0x80) == 0) + if (!(data[0] & BIT(7))) goto out; button = data[0] & BIT(0); @@ -56,8 +61,19 @@ out: static int ar1021_i2c_open(struct input_dev *dev) { + static const u8 cmd_enable_touch[] = { + AR1021_CMD, + 0x01, /* number of bytes after this */ + AR1021_CMD_ENABLE_TOUCH + }; struct ar1021_i2c *ar1021 = input_get_drvdata(dev); struct i2c_client *client = ar1021->client; + int error; + + error = i2c_master_send(ar1021->client, cmd_enable_touch, + sizeof(cmd_enable_touch)); + if (error < 0) + return error; enable_irq(client->irq); @@ -73,7 +89,7 @@ static void ar1021_i2c_close(struct input_dev *dev) } static int ar1021_i2c_probe(struct i2c_client *client, - const struct i2c_device_id *id) + const struct i2c_device_id *id) { struct ar1021_i2c *ar1021; struct input_dev *input; @@ -109,7 +125,7 @@ static int ar1021_i2c_probe(struct i2c_client *client, error = devm_request_threaded_irq(&client->dev, client->irq, NULL, ar1021_i2c_irq, - IRQF_TRIGGER_RISING | IRQF_ONESHOT, + IRQF_ONESHOT, "ar1021_i2c", ar1021); if (error) { dev_err(&client->dev, @@ -151,7 +167,7 @@ static int __maybe_unused ar1021_i2c_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(ar1021_i2c_pm, ar1021_i2c_suspend, ar1021_i2c_resume); static const struct i2c_device_id ar1021_i2c_id[] = { - { "MICROCHIP_AR1021_I2C", 0 }, + { "ar1021", 0 }, { }, }; MODULE_DEVICE_TABLE(i2c, ar1021_i2c_id); @@ -175,5 +191,5 @@ static struct i2c_driver ar1021_i2c_driver = { module_i2c_driver(ar1021_i2c_driver); MODULE_AUTHOR("Christian Gmeiner <christian.gmeiner@gmail.com>"); -MODULE_DESCRIPTION("Microchip AR1021 I2C Driver"); +MODULE_DESCRIPTION("Microchip AR1020 and AR1021 I2C Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c index 16023867b9da..2facad75eb6d 100644 --- a/drivers/input/touchscreen/eeti_ts.c +++ b/drivers/input/touchscreen/eeti_ts.c @@ -31,9 +31,9 @@ #include <linux/interrupt.h> #include <linux/i2c.h> #include <linux/timer.h> -#include <linux/gpio.h> -#include <linux/input/eeti_ts.h> +#include <linux/gpio/consumer.h> #include <linux/slab.h> +#include <asm/unaligned.h> static bool flip_x; module_param(flip_x, bool, 0644); @@ -43,54 +43,31 @@ static bool flip_y; module_param(flip_y, bool, 0644); MODULE_PARM_DESC(flip_y, "flip y coordinate"); -struct eeti_ts_priv { +struct eeti_ts { struct i2c_client *client; struct input_dev *input; - struct work_struct work; - struct mutex mutex; - int irq_gpio, irq, irq_active_high; + struct gpio_desc *attn_gpio; + bool running; }; #define EETI_TS_BITDEPTH (11) #define EETI_MAXVAL ((1 << (EETI_TS_BITDEPTH + 1)) - 1) -#define REPORT_BIT_PRESSED (1 << 0) -#define REPORT_BIT_AD0 (1 << 1) -#define REPORT_BIT_AD1 (1 << 2) -#define REPORT_BIT_HAS_PRESSURE (1 << 6) +#define REPORT_BIT_PRESSED BIT(0) +#define REPORT_BIT_AD0 BIT(1) +#define REPORT_BIT_AD1 BIT(2) +#define REPORT_BIT_HAS_PRESSURE BIT(6) #define REPORT_RES_BITS(v) (((v) >> 1) + EETI_TS_BITDEPTH) -static inline int eeti_ts_irq_active(struct eeti_ts_priv *priv) +static void eeti_ts_report_event(struct eeti_ts *eeti, u8 *buf) { - return gpio_get_value(priv->irq_gpio) == priv->irq_active_high; -} - -static void eeti_ts_read(struct work_struct *work) -{ - char buf[6]; - unsigned int x, y, res, pressed, to = 100; - struct eeti_ts_priv *priv = - container_of(work, struct eeti_ts_priv, work); + unsigned int res; + u16 x, y; - mutex_lock(&priv->mutex); - - while (eeti_ts_irq_active(priv) && --to) - i2c_master_recv(priv->client, buf, sizeof(buf)); - - if (!to) { - dev_err(&priv->client->dev, - "unable to clear IRQ - line stuck?\n"); - goto out; - } - - /* drop non-report packets */ - if (!(buf[0] & 0x80)) - goto out; - - pressed = buf[0] & REPORT_BIT_PRESSED; res = REPORT_RES_BITS(buf[0] & (REPORT_BIT_AD0 | REPORT_BIT_AD1)); - x = buf[2] | (buf[1] << 8); - y = buf[4] | (buf[3] << 8); + + x = get_unaligned_be16(&buf[1]); + y = get_unaligned_be16(&buf[3]); /* fix the range to 11 bits */ x >>= res - EETI_TS_BITDEPTH; @@ -103,65 +80,78 @@ static void eeti_ts_read(struct work_struct *work) y = EETI_MAXVAL - y; if (buf[0] & REPORT_BIT_HAS_PRESSURE) - input_report_abs(priv->input, ABS_PRESSURE, buf[5]); + input_report_abs(eeti->input, ABS_PRESSURE, buf[5]); - input_report_abs(priv->input, ABS_X, x); - input_report_abs(priv->input, ABS_Y, y); - input_report_key(priv->input, BTN_TOUCH, !!pressed); - input_sync(priv->input); - -out: - mutex_unlock(&priv->mutex); + input_report_abs(eeti->input, ABS_X, x); + input_report_abs(eeti->input, ABS_Y, y); + input_report_key(eeti->input, BTN_TOUCH, buf[0] & REPORT_BIT_PRESSED); + input_sync(eeti->input); } static irqreturn_t eeti_ts_isr(int irq, void *dev_id) { - struct eeti_ts_priv *priv = dev_id; + struct eeti_ts *eeti = dev_id; + int len; + int error; + char buf[6]; - /* postpone I2C transactions as we are atomic */ - schedule_work(&priv->work); + do { + len = i2c_master_recv(eeti->client, buf, sizeof(buf)); + if (len != sizeof(buf)) { + error = len < 0 ? len : -EIO; + dev_err(&eeti->client->dev, + "failed to read touchscreen data: %d\n", + error); + break; + } + + if (buf[0] & 0x80) { + /* Motion packet */ + eeti_ts_report_event(eeti, buf); + } + } while (eeti->running && + eeti->attn_gpio && gpiod_get_value_cansleep(eeti->attn_gpio)); return IRQ_HANDLED; } -static void eeti_ts_start(struct eeti_ts_priv *priv) +static void eeti_ts_start(struct eeti_ts *eeti) { - enable_irq(priv->irq); - - /* Read the events once to arm the IRQ */ - eeti_ts_read(&priv->work); + eeti->running = true; + wmb(); + enable_irq(eeti->client->irq); } -static void eeti_ts_stop(struct eeti_ts_priv *priv) +static void eeti_ts_stop(struct eeti_ts *eeti) { - disable_irq(priv->irq); - cancel_work_sync(&priv->work); + eeti->running = false; + wmb(); + disable_irq(eeti->client->irq); } static int eeti_ts_open(struct input_dev *dev) { - struct eeti_ts_priv *priv = input_get_drvdata(dev); + struct eeti_ts *eeti = input_get_drvdata(dev); - eeti_ts_start(priv); + eeti_ts_start(eeti); return 0; } static void eeti_ts_close(struct input_dev *dev) { - struct eeti_ts_priv *priv = input_get_drvdata(dev); + struct eeti_ts *eeti = input_get_drvdata(dev); - eeti_ts_stop(priv); + eeti_ts_stop(eeti); } static int eeti_ts_probe(struct i2c_client *client, - const struct i2c_device_id *idp) + const struct i2c_device_id *idp) { - struct eeti_ts_platform_data *pdata = dev_get_platdata(&client->dev); - struct eeti_ts_priv *priv; + struct device *dev = &client->dev; + struct eeti_ts *eeti; struct input_dev *input; - unsigned int irq_flags; - int err = -ENOMEM; + int error; /* * In contrast to what's described in the datasheet, there seems @@ -170,21 +160,19 @@ static int eeti_ts_probe(struct i2c_client *client, * for interrupts to occur. */ - priv = kzalloc(sizeof(*priv), GFP_KERNEL); - if (!priv) { - dev_err(&client->dev, "failed to allocate driver data\n"); + eeti = devm_kzalloc(dev, sizeof(*eeti), GFP_KERNEL); + if (!eeti) { + dev_err(dev, "failed to allocate driver data\n"); return -ENOMEM; } - mutex_init(&priv->mutex); - input = input_allocate_device(); + input = devm_input_allocate_device(dev); if (!input) { - dev_err(&client->dev, "Failed to allocate input device.\n"); - goto err1; + dev_err(dev, "Failed to allocate input device.\n"); + return -ENOMEM; } - input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_capability(input, EV_KEY, BTN_TOUCH); input_set_abs_params(input, ABS_X, 0, EETI_MAXVAL, 0, 0); input_set_abs_params(input, ABS_Y, 0, EETI_MAXVAL, 0, 0); @@ -192,71 +180,38 @@ static int eeti_ts_probe(struct i2c_client *client, input->name = client->name; input->id.bustype = BUS_I2C; - input->dev.parent = &client->dev; input->open = eeti_ts_open; input->close = eeti_ts_close; - priv->client = client; - priv->input = input; - priv->irq_gpio = pdata->irq_gpio; - priv->irq = gpio_to_irq(pdata->irq_gpio); - - err = gpio_request_one(pdata->irq_gpio, GPIOF_IN, client->name); - if (err < 0) - goto err1; - - priv->irq_active_high = pdata->irq_active_high; - - irq_flags = priv->irq_active_high ? - IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING; + eeti->client = client; + eeti->input = input; - INIT_WORK(&priv->work, eeti_ts_read); - i2c_set_clientdata(client, priv); - input_set_drvdata(input, priv); + eeti->attn_gpio = devm_gpiod_get_optional(dev, "attn", GPIOD_IN); + if (IS_ERR(eeti->attn_gpio)) + return PTR_ERR(eeti->attn_gpio); - err = input_register_device(input); - if (err) - goto err2; + i2c_set_clientdata(client, eeti); + input_set_drvdata(input, eeti); - err = request_irq(priv->irq, eeti_ts_isr, irq_flags, - client->name, priv); - if (err) { - dev_err(&client->dev, "Unable to request touchscreen IRQ.\n"); - goto err3; + error = devm_request_threaded_irq(dev, client->irq, + NULL, eeti_ts_isr, + IRQF_ONESHOT, + client->name, eeti); + if (error) { + dev_err(dev, "Unable to request touchscreen IRQ: %d\n", + error); + return error; } /* * Disable the device for now. It will be enabled once the * input device is opened. */ - eeti_ts_stop(priv); - - return 0; - -err3: - input_unregister_device(input); - input = NULL; /* so we dont try to free it below */ -err2: - gpio_free(pdata->irq_gpio); -err1: - input_free_device(input); - kfree(priv); - return err; -} - -static int eeti_ts_remove(struct i2c_client *client) -{ - struct eeti_ts_priv *priv = i2c_get_clientdata(client); - - free_irq(priv->irq, priv); - /* - * eeti_ts_stop() leaves IRQ disabled. We need to re-enable it - * so that device still works if we reload the driver. - */ - enable_irq(priv->irq); + eeti_ts_stop(eeti); - input_unregister_device(priv->input); - kfree(priv); + error = input_register_device(input); + if (error) + return error; return 0; } @@ -264,18 +219,18 @@ static int eeti_ts_remove(struct i2c_client *client) static int __maybe_unused eeti_ts_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); - struct eeti_ts_priv *priv = i2c_get_clientdata(client); - struct input_dev *input_dev = priv->input; + struct eeti_ts *eeti = i2c_get_clientdata(client); + struct input_dev *input_dev = eeti->input; mutex_lock(&input_dev->mutex); if (input_dev->users) - eeti_ts_stop(priv); + eeti_ts_stop(eeti); mutex_unlock(&input_dev->mutex); if (device_may_wakeup(&client->dev)) - enable_irq_wake(priv->irq); + enable_irq_wake(client->irq); return 0; } @@ -283,16 +238,16 @@ static int __maybe_unused eeti_ts_suspend(struct device *dev) static int __maybe_unused eeti_ts_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); - struct eeti_ts_priv *priv = i2c_get_clientdata(client); - struct input_dev *input_dev = priv->input; + struct eeti_ts *eeti = i2c_get_clientdata(client); + struct input_dev *input_dev = eeti->input; if (device_may_wakeup(&client->dev)) - disable_irq_wake(priv->irq); + disable_irq_wake(client->irq); mutex_lock(&input_dev->mutex); if (input_dev->users) - eeti_ts_start(priv); + eeti_ts_start(eeti); mutex_unlock(&input_dev->mutex); @@ -313,7 +268,6 @@ static struct i2c_driver eeti_ts_driver = { .pm = &eeti_ts_pm, }, .probe = eeti_ts_probe, - .remove = eeti_ts_remove, .id_table = eeti_ts_id, }; diff --git a/drivers/input/touchscreen/imx6ul_tsc.c b/drivers/input/touchscreen/imx6ul_tsc.c index 7098e0a47019..ee82a975bfd2 100644 --- a/drivers/input/touchscreen/imx6ul_tsc.c +++ b/drivers/input/touchscreen/imx6ul_tsc.c @@ -337,11 +337,20 @@ static int imx6ul_tsc_open(struct input_dev *input_dev) dev_err(tsc->dev, "Could not prepare or enable the tsc clock: %d\n", err); - clk_disable_unprepare(tsc->adc_clk); - return err; + goto disable_adc_clk; } - return imx6ul_tsc_init(tsc); + err = imx6ul_tsc_init(tsc); + if (err) + goto disable_tsc_clk; + + return 0; + +disable_tsc_clk: + clk_disable_unprepare(tsc->tsc_clk); +disable_adc_clk: + clk_disable_unprepare(tsc->adc_clk); + return err; } static void imx6ul_tsc_close(struct input_dev *input_dev) diff --git a/drivers/input/touchscreen/lpc32xx_ts.c b/drivers/input/touchscreen/lpc32xx_ts.c index e0baa7de4102..4eb31ec10b18 100644 --- a/drivers/input/touchscreen/lpc32xx_ts.c +++ b/drivers/input/touchscreen/lpc32xx_ts.c @@ -142,11 +142,14 @@ static void lpc32xx_stop_tsc(struct lpc32xx_tsc *tsc) clk_disable_unprepare(tsc->clk); } -static void lpc32xx_setup_tsc(struct lpc32xx_tsc *tsc) +static int lpc32xx_setup_tsc(struct lpc32xx_tsc *tsc) { u32 tmp; + int err; - clk_prepare_enable(tsc->clk); + err = clk_prepare_enable(tsc->clk); + if (err) + return err; tmp = tsc_readl(tsc, LPC32XX_TSC_CON) & ~LPC32XX_TSC_ADCCON_POWER_UP; @@ -184,15 +187,15 @@ static void lpc32xx_setup_tsc(struct lpc32xx_tsc *tsc) /* Enable automatic ts event capture */ tsc_writel(tsc, LPC32XX_TSC_CON, tmp | LPC32XX_TSC_ADCCON_AUTO_EN); + + return 0; } static int lpc32xx_ts_open(struct input_dev *dev) { struct lpc32xx_tsc *tsc = input_get_drvdata(dev); - lpc32xx_setup_tsc(tsc); - - return 0; + return lpc32xx_setup_tsc(tsc); } static void lpc32xx_ts_close(struct input_dev *dev) diff --git a/drivers/input/touchscreen/max11801_ts.c b/drivers/input/touchscreen/max11801_ts.c index a595ae5284e3..72ca3efb5781 100644 --- a/drivers/input/touchscreen/max11801_ts.c +++ b/drivers/input/touchscreen/max11801_ts.c @@ -224,9 +224,16 @@ static const struct i2c_device_id max11801_ts_id[] = { }; MODULE_DEVICE_TABLE(i2c, max11801_ts_id); +static const struct of_device_id max11801_ts_dt_ids[] = { + { .compatible = "maxim,max11801" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, max11801_ts_dt_ids); + static struct i2c_driver max11801_ts_driver = { .driver = { .name = "max11801_ts", + .of_match_table = max11801_ts_dt_ids, }, .id_table = max11801_ts_id, .probe = max11801_ts_probe, diff --git a/drivers/input/touchscreen/melfas_mip4.c b/drivers/input/touchscreen/melfas_mip4.c index 703d7f983d0a..05108c2fea93 100644 --- a/drivers/input/touchscreen/melfas_mip4.c +++ b/drivers/input/touchscreen/melfas_mip4.c @@ -253,10 +253,21 @@ static int mip4_get_fw_version(struct mip4_ts *ts) */ static int mip4_query_device(struct mip4_ts *ts) { + union i2c_smbus_data dummy; int error; u8 cmd[2]; u8 buf[14]; + /* + * Make sure there is something at this address as we do not + * consider subsequent failures as fatal. + */ + if (i2c_smbus_xfer(ts->client->adapter, ts->client->addr, + 0, I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE, &dummy) < 0) { + dev_err(&ts->client->dev, "nothing at this address\n"); + return -ENXIO; + } + /* Product name */ cmd[0] = MIP4_R0_INFO; cmd[1] = MIP4_R1_INFO_PRODUCT_NAME; diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c index 404830a4a366..813dd68a5c82 100644 --- a/drivers/input/touchscreen/silead.c +++ b/drivers/input/touchscreen/silead.c @@ -580,12 +580,25 @@ static const struct acpi_device_id silead_ts_acpi_match[] = { MODULE_DEVICE_TABLE(acpi, silead_ts_acpi_match); #endif +#ifdef CONFIG_OF +static const struct of_device_id silead_ts_of_match[] = { + { .compatible = "silead,gsl1680" }, + { .compatible = "silead,gsl1688" }, + { .compatible = "silead,gsl3670" }, + { .compatible = "silead,gsl3675" }, + { .compatible = "silead,gsl3692" }, + { }, +}; +MODULE_DEVICE_TABLE(of, silead_ts_of_match); +#endif + static struct i2c_driver silead_ts_driver = { .probe = silead_ts_probe, .id_table = silead_ts_id, .driver = { .name = SILEAD_TS_NAME, .acpi_match_table = ACPI_PTR(silead_ts_acpi_match), + .of_match_table = of_match_ptr(silead_ts_of_match), .pm = &silead_ts_pm, }, }; diff --git a/drivers/input/touchscreen/sur40.c b/drivers/input/touchscreen/sur40.c index 4c0eecae065c..128e5bd74720 100644 --- a/drivers/input/touchscreen/sur40.c +++ b/drivers/input/touchscreen/sur40.c @@ -369,7 +369,7 @@ static void sur40_poll(struct input_polled_dev *polldev) * packet ID will usually increase in the middle of a series * instead of at the end. */ - if (packet_id != header->packet_id) + if (packet_id != le32_to_cpu(header->packet_id)) dev_dbg(sur40->dev, "packet ID mismatch\n"); packet_blobs = result / sizeof(struct sur40_blob); diff --git a/drivers/input/touchscreen/tps6507x-ts.c b/drivers/input/touchscreen/tps6507x-ts.c index a340bfccdfb6..75170a7439b1 100644 --- a/drivers/input/touchscreen/tps6507x-ts.c +++ b/drivers/input/touchscreen/tps6507x-ts.c @@ -226,7 +226,7 @@ static int tps6507x_ts_probe(struct platform_device *pdev) */ init_data = tps_board->tps6507x_ts_init_data; - tsc = kzalloc(sizeof(struct tps6507x_ts), GFP_KERNEL); + tsc = devm_kzalloc(&pdev->dev, sizeof(struct tps6507x_ts), GFP_KERNEL); if (!tsc) { dev_err(tps6507x_dev->dev, "failed to allocate driver data\n"); return -ENOMEM; @@ -240,11 +240,10 @@ static int tps6507x_ts_probe(struct platform_device *pdev) snprintf(tsc->phys, sizeof(tsc->phys), "%s/input0", dev_name(tsc->dev)); - poll_dev = input_allocate_polled_device(); + poll_dev = devm_input_allocate_polled_device(&pdev->dev); if (!poll_dev) { dev_err(tsc->dev, "Failed to allocate polled input device.\n"); - error = -ENOMEM; - goto err_free_mem; + return -ENOMEM; } tsc->poll_dev = poll_dev; @@ -274,32 +273,11 @@ static int tps6507x_ts_probe(struct platform_device *pdev) error = tps6507x_adc_standby(tsc); if (error) - goto err_free_polled_dev; + return error; error = input_register_polled_device(poll_dev); if (error) - goto err_free_polled_dev; - - platform_set_drvdata(pdev, tsc); - - return 0; - -err_free_polled_dev: - input_free_polled_device(poll_dev); -err_free_mem: - kfree(tsc); - return error; -} - -static int tps6507x_ts_remove(struct platform_device *pdev) -{ - struct tps6507x_ts *tsc = platform_get_drvdata(pdev); - struct input_polled_dev *poll_dev = tsc->poll_dev; - - input_unregister_polled_device(poll_dev); - input_free_polled_device(poll_dev); - - kfree(tsc); + return error; return 0; } @@ -309,7 +287,6 @@ static struct platform_driver tps6507x_ts_driver = { .name = "tps6507x-ts", }, .probe = tps6507x_ts_probe, - .remove = tps6507x_ts_remove, }; module_platform_driver(tps6507x_ts_driver); diff --git a/drivers/input/touchscreen/tsc2007.h b/drivers/input/touchscreen/tsc2007.h new file mode 100644 index 000000000000..30fdf5b04a6b --- /dev/null +++ b/drivers/input/touchscreen/tsc2007.h @@ -0,0 +1,101 @@ + +/* + * Copyright (c) 2008 MtekVision Co., Ltd. + * Kwangwoo Lee <kwlee@mtekvision.com> + * + * Using code from: + * - ads7846.c + * Copyright (c) 2005 David Brownell + * Copyright (c) 2006 Nokia Corporation + * - corgi_ts.c + * Copyright (C) 2004-2005 Richard Purdie + * - omap_ts.[hc], ads7846.h, ts_osk.c + * Copyright (C) 2002 MontaVista Software + * Copyright (C) 2004 Texas Instruments + * Copyright (C) 2005 Dirk Behme + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _TSC2007_H +#define _TSC2007_H + +#define TSC2007_MEASURE_TEMP0 (0x0 << 4) +#define TSC2007_MEASURE_AUX (0x2 << 4) +#define TSC2007_MEASURE_TEMP1 (0x4 << 4) +#define TSC2007_ACTIVATE_XN (0x8 << 4) +#define TSC2007_ACTIVATE_YN (0x9 << 4) +#define TSC2007_ACTIVATE_YP_XN (0xa << 4) +#define TSC2007_SETUP (0xb << 4) +#define TSC2007_MEASURE_X (0xc << 4) +#define TSC2007_MEASURE_Y (0xd << 4) +#define TSC2007_MEASURE_Z1 (0xe << 4) +#define TSC2007_MEASURE_Z2 (0xf << 4) + +#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2) +#define TSC2007_ADC_ON_IRQ_DIS0 (0x1 << 2) +#define TSC2007_ADC_OFF_IRQ_EN (0x2 << 2) +#define TSC2007_ADC_ON_IRQ_DIS1 (0x3 << 2) + +#define TSC2007_12BIT (0x0 << 1) +#define TSC2007_8BIT (0x1 << 1) + +#define MAX_12BIT ((1 << 12) - 1) + +#define ADC_ON_12BIT (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0) + +#define READ_Y (ADC_ON_12BIT | TSC2007_MEASURE_Y) +#define READ_Z1 (ADC_ON_12BIT | TSC2007_MEASURE_Z1) +#define READ_Z2 (ADC_ON_12BIT | TSC2007_MEASURE_Z2) +#define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X) +#define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN) + +struct ts_event { + u16 x; + u16 y; + u16 z1, z2; +}; + +struct tsc2007 { + struct input_dev *input; + char phys[32]; + + struct i2c_client *client; + + u16 model; + u16 x_plate_ohms; + u16 max_rt; + unsigned long poll_period; /* in jiffies */ + int fuzzx; + int fuzzy; + int fuzzz; + + unsigned int gpio; + int irq; + + wait_queue_head_t wait; + bool stopped; + + int (*get_pendown_state)(struct device *); + void (*clear_penirq)(void); + + struct mutex mlock; +}; + +int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd); +u32 tsc2007_calculate_resistance(struct tsc2007 *tsc, struct ts_event *tc); +bool tsc2007_is_pen_down(struct tsc2007 *ts); + +#if IS_ENABLED(CONFIG_TOUCHSCREEN_TSC2007_IIO) +/* defined in tsc2007_iio.c */ +int tsc2007_iio_configure(struct tsc2007 *ts); +#else +static inline int tsc2007_iio_configure(struct tsc2007 *ts) +{ + return 0; +} +#endif /* CONFIG_TOUCHSCREEN_TSC2007_IIO */ + +#endif /* _TSC2007_H */ diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007_core.c index 5d0cd51c6f41..fc7384936011 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007_core.c @@ -27,70 +27,10 @@ #include <linux/i2c.h> #include <linux/i2c/tsc2007.h> #include <linux/of_device.h> -#include <linux/of.h> #include <linux/of_gpio.h> +#include "tsc2007.h" -#define TSC2007_MEASURE_TEMP0 (0x0 << 4) -#define TSC2007_MEASURE_AUX (0x2 << 4) -#define TSC2007_MEASURE_TEMP1 (0x4 << 4) -#define TSC2007_ACTIVATE_XN (0x8 << 4) -#define TSC2007_ACTIVATE_YN (0x9 << 4) -#define TSC2007_ACTIVATE_YP_XN (0xa << 4) -#define TSC2007_SETUP (0xb << 4) -#define TSC2007_MEASURE_X (0xc << 4) -#define TSC2007_MEASURE_Y (0xd << 4) -#define TSC2007_MEASURE_Z1 (0xe << 4) -#define TSC2007_MEASURE_Z2 (0xf << 4) - -#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2) -#define TSC2007_ADC_ON_IRQ_DIS0 (0x1 << 2) -#define TSC2007_ADC_OFF_IRQ_EN (0x2 << 2) -#define TSC2007_ADC_ON_IRQ_DIS1 (0x3 << 2) - -#define TSC2007_12BIT (0x0 << 1) -#define TSC2007_8BIT (0x1 << 1) - -#define MAX_12BIT ((1 << 12) - 1) - -#define ADC_ON_12BIT (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0) - -#define READ_Y (ADC_ON_12BIT | TSC2007_MEASURE_Y) -#define READ_Z1 (ADC_ON_12BIT | TSC2007_MEASURE_Z1) -#define READ_Z2 (ADC_ON_12BIT | TSC2007_MEASURE_Z2) -#define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X) -#define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN) - -struct ts_event { - u16 x; - u16 y; - u16 z1, z2; -}; - -struct tsc2007 { - struct input_dev *input; - char phys[32]; - - struct i2c_client *client; - - u16 model; - u16 x_plate_ohms; - u16 max_rt; - unsigned long poll_period; /* in jiffies */ - int fuzzx; - int fuzzy; - int fuzzz; - - unsigned gpio; - int irq; - - wait_queue_head_t wait; - bool stopped; - - int (*get_pendown_state)(struct device *); - void (*clear_penirq)(void); -}; - -static inline int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd) +int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd) { s32 data; u16 val; @@ -128,7 +68,7 @@ static void tsc2007_read_values(struct tsc2007 *tsc, struct ts_event *tc) tsc2007_xfer(tsc, PWRDOWN); } -static u32 tsc2007_calculate_pressure(struct tsc2007 *tsc, struct ts_event *tc) +u32 tsc2007_calculate_resistance(struct tsc2007 *tsc, struct ts_event *tc) { u32 rt = 0; @@ -137,7 +77,7 @@ static u32 tsc2007_calculate_pressure(struct tsc2007 *tsc, struct ts_event *tc) tc->x = 0; if (likely(tc->x && tc->z1)) { - /* compute touch pressure resistance using equation #1 */ + /* compute touch resistance using equation #1 */ rt = tc->z2 - tc->z1; rt *= tc->x; rt *= tsc->x_plate_ohms; @@ -148,7 +88,7 @@ static u32 tsc2007_calculate_pressure(struct tsc2007 *tsc, struct ts_event *tc) return rt; } -static bool tsc2007_is_pen_down(struct tsc2007 *ts) +bool tsc2007_is_pen_down(struct tsc2007 *ts) { /* * NOTE: We can't rely on the pressure to determine the pen down @@ -180,9 +120,12 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle) while (!ts->stopped && tsc2007_is_pen_down(ts)) { /* pen is down, continue with the measurement */ + + mutex_lock(&ts->mlock); tsc2007_read_values(ts, &tc); + mutex_unlock(&ts->mlock); - rt = tsc2007_calculate_pressure(ts, &tc); + rt = tsc2007_calculate_resistance(ts, &tc); if (!rt && !ts->get_pendown_state) { /* @@ -195,9 +138,11 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle) if (rt <= ts->max_rt) { dev_dbg(&ts->client->dev, - "DOWN point(%4d,%4d), pressure (%4u)\n", + "DOWN point(%4d,%4d), resistance (%4u)\n", tc.x, tc.y, rt); + rt = ts->max_rt - rt; + input_report_key(input, BTN_TOUCH, 1); input_report_abs(input, ABS_X, tc.x); input_report_abs(input, ABS_Y, tc.y); @@ -375,7 +320,8 @@ static void tsc2007_call_exit_platform_hw(void *data) static int tsc2007_probe(struct i2c_client *client, const struct i2c_device_id *id) { - const struct tsc2007_platform_data *pdata = dev_get_platdata(&client->dev); + const struct tsc2007_platform_data *pdata = + dev_get_platdata(&client->dev); struct tsc2007 *ts; struct input_dev *input_dev; int err; @@ -404,7 +350,9 @@ static int tsc2007_probe(struct i2c_client *client, ts->client = client; ts->irq = client->irq; ts->input = input_dev; + init_waitqueue_head(&ts->wait); + mutex_init(&ts->mlock); snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&client->dev)); @@ -418,8 +366,7 @@ static int tsc2007_probe(struct i2c_client *client, input_set_drvdata(input_dev, ts); - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_capability(input_dev, EV_KEY, BTN_TOUCH); input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, ts->fuzzx, 0); input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, ts->fuzzy, 0); @@ -455,6 +402,14 @@ static int tsc2007_probe(struct i2c_client *client, tsc2007_stop(ts); + /* power down the chip (TSC2007_SETUP does not ACK on I2C) */ + err = tsc2007_xfer(ts, PWRDOWN); + if (err < 0) { + dev_err(&client->dev, + "Failed to setup chip: %d\n", err); + return err; /* chip does not respond */ + } + err = input_register_device(input_dev); if (err) { dev_err(&client->dev, @@ -462,6 +417,13 @@ static int tsc2007_probe(struct i2c_client *client, return err; } + err = tsc2007_iio_configure(ts); + if (err) { + dev_err(&client->dev, + "Failed to register with IIO: %d\n", err); + return err; + } + return 0; } diff --git a/drivers/input/touchscreen/tsc2007_iio.c b/drivers/input/touchscreen/tsc2007_iio.c new file mode 100644 index 000000000000..27b25a9fce83 --- /dev/null +++ b/drivers/input/touchscreen/tsc2007_iio.c @@ -0,0 +1,140 @@ +/* + * Copyright (c) 2016 Golden Delicious Comp. GmbH&Co. KG + * Nikolaus Schaller <hns@goldelico.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include "tsc2007.h" + +struct tsc2007_iio { + struct tsc2007 *ts; +}; + +#define TSC2007_CHAN_IIO(_chan, _name, _type, _chan_info) \ +{ \ + .datasheet_name = _name, \ + .type = _type, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(_chan_info), \ + .indexed = 1, \ + .channel = _chan, \ +} + +static const struct iio_chan_spec tsc2007_iio_channel[] = { + TSC2007_CHAN_IIO(0, "x", IIO_VOLTAGE, IIO_CHAN_INFO_RAW), + TSC2007_CHAN_IIO(1, "y", IIO_VOLTAGE, IIO_CHAN_INFO_RAW), + TSC2007_CHAN_IIO(2, "z1", IIO_VOLTAGE, IIO_CHAN_INFO_RAW), + TSC2007_CHAN_IIO(3, "z2", IIO_VOLTAGE, IIO_CHAN_INFO_RAW), + TSC2007_CHAN_IIO(4, "adc", IIO_VOLTAGE, IIO_CHAN_INFO_RAW), + TSC2007_CHAN_IIO(5, "rt", IIO_VOLTAGE, IIO_CHAN_INFO_RAW), /* Ohms? */ + TSC2007_CHAN_IIO(6, "pen", IIO_PRESSURE, IIO_CHAN_INFO_RAW), + TSC2007_CHAN_IIO(7, "temp0", IIO_TEMP, IIO_CHAN_INFO_RAW), + TSC2007_CHAN_IIO(8, "temp1", IIO_TEMP, IIO_CHAN_INFO_RAW), +}; + +static int tsc2007_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct tsc2007_iio *iio = iio_priv(indio_dev); + struct tsc2007 *tsc = iio->ts; + int adc_chan = chan->channel; + int ret = 0; + + if (adc_chan >= ARRAY_SIZE(tsc2007_iio_channel)) + return -EINVAL; + + if (mask != IIO_CHAN_INFO_RAW) + return -EINVAL; + + mutex_lock(&tsc->mlock); + + switch (chan->channel) { + case 0: + *val = tsc2007_xfer(tsc, READ_X); + break; + case 1: + *val = tsc2007_xfer(tsc, READ_Y); + break; + case 2: + *val = tsc2007_xfer(tsc, READ_Z1); + break; + case 3: + *val = tsc2007_xfer(tsc, READ_Z2); + break; + case 4: + *val = tsc2007_xfer(tsc, (ADC_ON_12BIT | TSC2007_MEASURE_AUX)); + break; + case 5: { + struct ts_event tc; + + tc.x = tsc2007_xfer(tsc, READ_X); + tc.z1 = tsc2007_xfer(tsc, READ_Z1); + tc.z2 = tsc2007_xfer(tsc, READ_Z2); + *val = tsc2007_calculate_resistance(tsc, &tc); + break; + } + case 6: + *val = tsc2007_is_pen_down(tsc); + break; + case 7: + *val = tsc2007_xfer(tsc, + (ADC_ON_12BIT | TSC2007_MEASURE_TEMP0)); + break; + case 8: + *val = tsc2007_xfer(tsc, + (ADC_ON_12BIT | TSC2007_MEASURE_TEMP1)); + break; + } + + /* Prepare for next touch reading - power down ADC, enable PENIRQ */ + tsc2007_xfer(tsc, PWRDOWN); + + mutex_unlock(&tsc->mlock); + + ret = IIO_VAL_INT; + + return ret; +} + +static const struct iio_info tsc2007_iio_info = { + .read_raw = tsc2007_read_raw, + .driver_module = THIS_MODULE, +}; + +int tsc2007_iio_configure(struct tsc2007 *ts) +{ + struct iio_dev *indio_dev; + struct tsc2007_iio *iio; + int error; + + indio_dev = devm_iio_device_alloc(&ts->client->dev, sizeof(*iio)); + if (!indio_dev) { + dev_err(&ts->client->dev, "iio_device_alloc failed\n"); + return -ENOMEM; + } + + iio = iio_priv(indio_dev); + iio->ts = ts; + + indio_dev->name = "tsc2007"; + indio_dev->dev.parent = &ts->client->dev; + indio_dev->info = &tsc2007_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = tsc2007_iio_channel; + indio_dev->num_channels = ARRAY_SIZE(tsc2007_iio_channel); + + error = devm_iio_device_register(&ts->client->dev, indio_dev); + if (error) { + dev_err(&ts->client->dev, + "iio_device_register() failed: %d\n", error); + return error; + } + + return 0; +} diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 3a57e3dc9bec..72d0ece70ed3 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -38,6 +38,7 @@ extern struct bus_type i2c_bus_type; extern struct device_type i2c_adapter_type; +extern struct device_type i2c_client_type; /* --- General options ------------------------------------------------ */ @@ -306,6 +307,8 @@ static inline int i2c_slave_event(struct i2c_client *client, * @of_node: pointer to OpenFirmware device node * @fwnode: device node supplied by the platform firmware * @properties: additional device properties for the device + * @resources: resources associated with the device + * @num_resources: number of resources in the @resources array * @irq: stored in i2c_client.irq * * I2C doesn't actually support hardware probing, although controllers and @@ -328,6 +331,8 @@ struct i2c_board_info { struct device_node *of_node; struct fwnode_handle *fwnode; const struct property_entry *properties; + const struct resource *resources; + unsigned int num_resources; int irq; }; diff --git a/include/linux/input/eeti_ts.h b/include/linux/input/eeti_ts.h deleted file mode 100644 index 16625d799b6f..000000000000 --- a/include/linux/input/eeti_ts.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef LINUX_INPUT_EETI_TS_H -#define LINUX_INPUT_EETI_TS_H - -struct eeti_ts_platform_data { - int irq_gpio; - unsigned int irq_active_high; -}; - -#endif /* LINUX_INPUT_EETI_TS_H */ - diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h index 37b04a0fdea4..6174733a57eb 100644 --- a/include/linux/input/matrix_keypad.h +++ b/include/linux/input/matrix_keypad.h @@ -49,6 +49,8 @@ struct matrix_keymap_data { * @wakeup: controls whether the device should be set up as wakeup * source * @no_autorepeat: disable key autorepeat + * @drive_inactive_cols: drive inactive columns during scan, rather than + * making them inputs. * * This structure represents platform-specific data that use used by * matrix_keypad driver to perform proper initialization. @@ -73,6 +75,7 @@ struct matrix_keypad_platform_data { bool active_low; bool wakeup; bool no_autorepeat; + bool drive_inactive_cols; }; int matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data, diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h index f1ef6388c233..c93e7e0300ef 100644 --- a/include/linux/mfd/cros_ec_commands.h +++ b/include/linux/mfd/cros_ec_commands.h @@ -2041,6 +2041,9 @@ enum ec_mkbp_event { /* The state of the switches have changed. */ EC_MKBP_EVENT_SWITCH = 4, + /* EC sent a sysrq command */ + EC_MKBP_EVENT_SYSRQ = 6, + /* Number of MKBP events */ EC_MKBP_EVENT_COUNT, }; @@ -2053,6 +2056,7 @@ union ec_response_get_next_data { uint32_t buttons; uint32_t switches; + uint32_t sysrq; } __packed; struct ec_response_get_next_event { diff --git a/include/linux/serio.h b/include/linux/serio.h index c733cff44e18..138a5efe863a 100644 --- a/include/linux/serio.h +++ b/include/linux/serio.h @@ -77,6 +77,7 @@ struct serio_driver { irqreturn_t (*interrupt)(struct serio *, unsigned char, unsigned int); int (*connect)(struct serio *, struct serio_driver *drv); int (*reconnect)(struct serio *); + int (*fast_reconnect)(struct serio *); void (*disconnect)(struct serio *); void (*cleanup)(struct serio *); |
