ARM: Fix undefined instruction exception handling

While trying to get a v3.5 kernel booted on the cubox, I noticed that
VFP does not work correctly with VFP bounce handling.  This is because
of the confusion over 16-bit vs 32-bit instructions, and where PC is
supposed to point to.

The rule is that FP handlers are entered with regs->ARM_pc pointing at
the _next_ instruction to be executed.  However, if the exception is
not handled, regs->ARM_pc points at the faulting instruction.

This is easy for ARM mode, because we know that the next instruction and
previous instructions are separated by four bytes.  This is not true of
Thumb2 though.

Since all FP instructions are 32-bit in Thumb2, it makes things easy.
We just need to select the appropriate adjustment.  Do this by moving
the adjustment out of do_undefinstr() into the assembly code, as only
the assembly code knows whether it's dealing with a 32-bit or 16-bit
instruction.

Cc: <stable@vger.kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

4 files changed, 92 insertions, 62 deletions

diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 0d1851ca6eb9..0f82098c9bfe 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -244,6 +244,19 @@ svc_preempt:
 	b	1b
 #endif
 
+__und_fault:
+	@ Correct the PC such that it is pointing at the instruction
+	@ which caused the fault.  If the faulting instruction was ARM
+	@ the PC will be pointing at the next instruction, and have to
+	@ subtract 4.  Otherwise, it is Thumb, and the PC will be
+	@ pointing at the second half of the Thumb instruction.  We
+	@ have to subtract 2.
+	ldr	r2, [r0, #S_PC]
+	sub	r2, r2, r1
+	str	r2, [r0, #S_PC]
+	b	do_undefinstr
+ENDPROC(__und_fault)
+
 	.align	5
 __und_svc:
 #ifdef CONFIG_KPROBES
@@ -261,25 +274,32 @@ __und_svc:
 	@
 	@  r0 - instruction
 	@
-#ifndef	CONFIG_THUMB2_KERNEL
+#ifndef CONFIG_THUMB2_KERNEL
 	ldr	r0, [r4, #-4]
 #else
+	mov	r1, #2
 	ldrh	r0, [r4, #-2]			@ Thumb instruction at LR - 2
 	cmp	r0, #0xe800			@ 32-bit instruction if xx >= 0
-	ldrhhs	r9, [r4]			@ bottom 16 bits
-	orrhs	r0, r9, r0, lsl #16
+	blo	__und_svc_fault
+	ldrh	r9, [r4]			@ bottom 16 bits
+	add	r4, r4, #2
+	str	r4, [sp, #S_PC]
+	orr	r0, r9, r0, lsl #16
 #endif
-	adr	r9, BSYM(1f)
+	adr	r9, BSYM(__und_svc_finish)
 	mov	r2, r4
 	bl	call_fpe
 
+	mov	r1, #4				@ PC correction to apply
+__und_svc_fault:
 	mov	r0, sp				@ struct pt_regs *regs
-	bl	do_undefinstr
+	bl	__und_fault
 
 	@
 	@ IRQs off again before pulling preserved data off the stack
 	@
-1:	disable_irq_notrace
+__und_svc_finish:
+	disable_irq_notrace
 
 	@
 	@ restore SPSR and restart the instruction
@@ -423,25 +443,33 @@ __und_usr:
 	mov	r2, r4
 	mov	r3, r5
 
+	@ r2 = regs->ARM_pc, which is either 2 or 4 bytes ahead of the
+	@      faulting instruction depending on Thumb mode.
+	@ r3 = regs->ARM_cpsr
 	@
-	@ fall through to the emulation code, which returns using r9 if
-	@ it has emulated the instruction, or the more conventional lr
-	@ if we are to treat this as a real undefined instruction
-	@
-	@  r0 - instruction
+	@ The emulation code returns using r9 if it has emulated the
+	@ instruction, or the more conventional lr if we are to treat
+	@ this as a real undefined instruction
 	@
 	adr	r9, BSYM(ret_from_exception)
-	adr	lr, BSYM(__und_usr_unknown)
+
 	tst	r3, #PSR_T_BIT			@ Thumb mode?
-	itet	eq				@ explicit IT needed for the 1f label
-	subeq	r4, r2, #4			@ ARM instr at LR - 4
-	subne	r4, r2, #2			@ Thumb instr at LR - 2
-1:	ldreqt	r0, [r4]
+	bne	__und_usr_thumb
+	sub	r4, r2, #4			@ ARM instr at LR - 4
+1:	ldrt	r0, [r4]
 #ifdef CONFIG_CPU_ENDIAN_BE8
-	reveq	r0, r0				@ little endian instruction
+	rev	r0, r0				@ little endian instruction
 #endif
-	beq	call_fpe
+	@ r0 = 32-bit ARM instruction which caused the exception
+	@ r2 = PC value for the following instruction (:= regs->ARM_pc)
+	@ r4 = PC value for the faulting instruction
+	@ lr = 32-bit undefined instruction function
+	adr	lr, BSYM(__und_usr_fault_32)
+	b	call_fpe
+
+__und_usr_thumb:
 	@ Thumb instruction
+	sub	r4, r2, #2			@ First half of thumb instr at LR - 2
 #if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7
 /*
  * Thumb-2 instruction handling.  Note that because pre-v6 and >= v6 platforms
@@ -455,7 +483,7 @@ __und_usr:
 	ldr	r5, .LCcpu_architecture
 	ldr	r5, [r5]
 	cmp	r5, #CPU_ARCH_ARMv7
-	blo	__und_usr_unknown
+	blo	__und_usr_fault_16		@ 16bit undefined instruction
 /*
  * The following code won't get run unless the running CPU really is v7, so
  * coding round the lack of ldrht on older arches is pointless.  Temporarily
@@ -463,15 +491,18 @@ __und_usr:
  */
 	.arch	armv6t2
 #endif
-2:
- ARM(	ldrht	r5, [r4], #2	)
- THUMB(	ldrht	r5, [r4]	)
- THUMB(	add	r4, r4, #2	)
+2:	ldrht	r5, [r4]
 	cmp	r5, #0xe800			@ 32bit instruction if xx != 0
-	blo	__und_usr_unknown
-3:	ldrht	r0, [r4]
+	blo	__und_usr_fault_16		@ 16bit undefined instruction
+3:	ldrht	r0, [r2]
 	add	r2, r2, #2			@ r2 is PC + 2, make it PC + 4
+	str	r2, [sp, #S_PC]			@ it's a 2x16bit instr, update
 	orr	r0, r0, r5, lsl #16
+	adr	lr, BSYM(__und_usr_fault_32)
+	@ r0 = the two 16-bit Thumb instructions which caused the exception
+	@ r2 = PC value for the following Thumb instruction (:= regs->ARM_pc)
+	@ r4 = PC value for the first 16-bit Thumb instruction
+	@ lr = 32bit undefined instruction function
 
 #if __LINUX_ARM_ARCH__ < 7
 /* If the target arch was overridden, change it back: */
@@ -482,17 +513,13 @@ __und_usr:
 #endif
 #endif /* __LINUX_ARM_ARCH__ < 7 */
 #else /* !(CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7) */
-	b	__und_usr_unknown
+	b	__und_usr_fault_16
 #endif
- UNWIND(.fnend		)
+ UNWIND(.fnend)
 ENDPROC(__und_usr)
 
-	@
-	@ fallthrough to call_fpe
-	@
-
 /*
- * The out of line fixup for the ldrt above.
+ * The out of line fixup for the ldrt instructions above.
  */
 	.pushsection .fixup, "ax"
 	.align	2
@@ -524,11 +551,12 @@ ENDPROC(__und_usr)
  * NEON handler code.
  *
  * Emulators may wish to make use of the following registers:
- *  r0  = instruction opcode.
- *  r2  = PC+4
+ *  r0  = instruction opcode (32-bit ARM or two 16-bit Thumb)
+ *  r2  = PC value to resume execution after successful emulation
  *  r9  = normal "successful" return address
- *  r10 = this threads thread_info structure.
+ *  r10 = this threads thread_info structure
  *  lr  = unrecognised instruction return address
+ * IRQs disabled, FIQs enabled.
  */
 	@
 	@ Fall-through from Thumb-2 __und_usr
@@ -659,12 +687,17 @@ ENTRY(no_fp)
 	mov	pc, lr
 ENDPROC(no_fp)
 
-__und_usr_unknown:
-	enable_irq
+__und_usr_fault_32:
+	mov	r1, #4
+	b	1f
+__und_usr_fault_16:
+	mov	r1, #2
+1:	enable_irq
 	mov	r0, sp
 	adr	lr, BSYM(ret_from_exception)
-	b	do_undefinstr
-ENDPROC(__und_usr_unknown)
+	b	__und_fault
+ENDPROC(__und_usr_fault_32)
+ENDPROC(__und_usr_fault_16)
 
 	.align	5
 __pabt_usr:
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 3647170e9a16..c7cae6b9a4d9 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -370,18 +370,10 @@ static int call_undef_hook(struct pt_regs *regs, unsigned int instr)
 
 asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 {
-	unsigned int correction = thumb_mode(regs) ? 2 : 4;
 	unsigned int instr;
 	siginfo_t info;
 	void __user *pc;
 
-	/*
-	 * According to the ARM ARM, PC is 2 or 4 bytes ahead,
-	 * depending whether we're in Thumb mode or not.
-	 * Correct this offset.
-	 */
-	regs->ARM_pc -= correction;
-
 	pc = (void __user *)instruction_pointer(regs);
 
 	if (processor_mode(regs) == SVC_MODE) {
diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S
index 4fa9903b83cf..cc926c985981 100644
--- a/arch/arm/vfp/entry.S
+++ b/arch/arm/vfp/entry.S
@@ -7,18 +7,20 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Basic entry code, called from the kernel's undefined instruction trap.
- *  r0  = faulted instruction
- *  r5  = faulted PC+4
- *  r9  = successful return
- *  r10 = thread_info structure
- *  lr  = failure return
  */
 #include <asm/thread_info.h>
 #include <asm/vfpmacros.h>
 #include "../kernel/entry-header.S"
 
+@ VFP entry point.
+@
+@  r0  = instruction opcode (32-bit ARM or two 16-bit Thumb)
+@  r2  = PC value to resume execution after successful emulation
+@  r9  = normal "successful" return address
+@  r10 = this threads thread_info structure
+@  lr  = unrecognised instruction return address
+@  IRQs disabled.
+@
 ENTRY(do_vfp)
 #ifdef CONFIG_PREEMPT
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 2d30c7f6edd3..3a0efaad6090 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -61,13 +61,13 @@
 
 @ VFP hardware support entry point.
 @
-@  r0  = faulted instruction
-@  r2  = faulted PC+4
-@  r9  = successful return
+@  r0  = instruction opcode (32-bit ARM or two 16-bit Thumb)
+@  r2  = PC value to resume execution after successful emulation
+@  r9  = normal "successful" return address
 @  r10 = vfp_state union
 @  r11 = CPU number
-@  lr  = failure return
-
+@  lr  = unrecognised instruction return address
+@  IRQs enabled.
 ENTRY(vfp_support_entry)
 	DBGSTR3	"instr %08x pc %08x state %p", r0, r2, r10
 
@@ -161,9 +161,12 @@ vfp_hw_state_valid:
 					@ exception before retrying branch
 					@ out before setting an FPEXC that
 					@ stops us reading stuff
-	VFPFMXR	FPEXC, r1		@ restore FPEXC last
-	sub	r2, r2, #4
-	str	r2, [sp, #S_PC]		@ retry the instruction
+	VFPFMXR	FPEXC, r1		@ Restore FPEXC last
+	sub	r2, r2, #4		@ Retry current instruction - if Thumb
+	str	r2, [sp, #S_PC]		@ mode it's two 16-bit instructions,
+					@ else it's one 32-bit instruction, so
+					@ always subtract 4 from the following
+					@ instruction address.
 #ifdef CONFIG_PREEMPT
 	get_thread_info	r10
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count