summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2016-12-08 14:33:17 -0500
committerDavid S. Miller <davem@davemloft.net>2016-12-08 14:33:17 -0500
commit107bc0aa95ca572df42da43c30a2079266e992e4 (patch)
treec3f74ba0a5f6390ddca93f5b8ed51c1400c3a145
parentea1e76f78a30c7055afd9e94f785743eeda71c52 (diff)
parenta62da6f14db79bd7ea435ab095e998b31b3dbb22 (diff)
downloadlwn-107bc0aa95ca572df42da43c30a2079266e992e4.tar.gz
lwn-107bc0aa95ca572df42da43c30a2079266e992e4.zip
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Johan Hedberg says: ==================== pull request: bluetooth-next 2016-12-08 I didn't miss your "net-next is closed" email, but it did come as a bit of a surprise, and due to time-zone differences I didn't have a chance to react to it until now. We would have had a couple of patches in bluetooth-next that we'd still have wanted to get to 4.10. Out of these the most critical one is the H7/CT2 patch for Bluetooth Security Manager Protocol, something that couldn't be published before the Bluetooth 5.0 specification went public (yesterday). If these really can't go to net-next we'll likely be sending at least this patch through bluetooth.git to net.git for rc1 inclusion. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/bluetooth/btmrvl_drv.h1
-rw-r--r--drivers/net/ieee802154/atusb.c79
-rw-r--r--drivers/net/ieee802154/atusb.h11
-rw-r--r--net/bluetooth/smp.c85
-rw-r--r--net/bluetooth/smp.h1
5 files changed, 149 insertions, 28 deletions
diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h
index f742384b53f7..fc3caf4541ba 100644
--- a/drivers/bluetooth/btmrvl_drv.h
+++ b/drivers/bluetooth/btmrvl_drv.h
@@ -32,7 +32,6 @@
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
-#include <linux/slab.h>
#include <linux/of_irq.h>
#define BTM_HEADER_LEN 4
diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c
index 322864a1a94b..1253f864737a 100644
--- a/drivers/net/ieee802154/atusb.c
+++ b/drivers/net/ieee802154/atusb.c
@@ -58,6 +58,11 @@ struct atusb {
struct urb *tx_urb;
struct sk_buff *tx_skb;
uint8_t tx_ack_seq; /* current TX ACK sequence number */
+
+ /* Firmware variable */
+ unsigned char fw_ver_maj; /* Firmware major version number */
+ unsigned char fw_ver_min; /* Firmware minor version number */
+ unsigned char fw_hw_type; /* Firmware hardware type */
};
/* ----- USB commands without data ----------------------------------------- */
@@ -541,6 +546,21 @@ atusb_set_csma_params(struct ieee802154_hw *hw, u8 min_be, u8 max_be, u8 retries
}
static int
+atusb_set_frame_retries(struct ieee802154_hw *hw, s8 retries)
+{
+ struct atusb *atusb = hw->priv;
+ struct device *dev = &atusb->usb_dev->dev;
+
+ if (atusb->fw_ver_maj == 0 && atusb->fw_ver_min < 3) {
+ dev_info(dev, "Automatic frame retransmission is only available from "
+ "firmware version 0.3. Please update if you want this feature.");
+ return -EINVAL;
+ }
+
+ return atusb_write_subreg(atusb, SR_MAX_FRAME_RETRIES, retries);
+}
+
+static int
atusb_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on)
{
struct atusb *atusb = hw->priv;
@@ -579,6 +599,7 @@ static const struct ieee802154_ops atusb_ops = {
.set_cca_mode = atusb_set_cca_mode,
.set_cca_ed_level = atusb_set_cca_ed_level,
.set_csma_params = atusb_set_csma_params,
+ .set_frame_retries = atusb_set_frame_retries,
.set_promiscuous_mode = atusb_set_promiscuous_mode,
};
@@ -594,14 +615,19 @@ static int atusb_get_and_show_revision(struct atusb *atusb)
ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
ATUSB_ID, ATUSB_REQ_FROM_DEV, 0, 0,
buffer, 3, 1000);
- if (ret >= 0)
+ if (ret >= 0) {
+ atusb->fw_ver_maj = buffer[0];
+ atusb->fw_ver_min = buffer[1];
+ atusb->fw_hw_type = buffer[2];
+
dev_info(&usb_dev->dev,
"Firmware: major: %u, minor: %u, hardware type: %u\n",
- buffer[0], buffer[1], buffer[2]);
- if (buffer[0] == 0 && buffer[1] < 2) {
+ atusb->fw_ver_maj, atusb->fw_ver_min, atusb->fw_hw_type);
+ }
+ if (atusb->fw_ver_maj == 0 && atusb->fw_ver_min < 2) {
dev_info(&usb_dev->dev,
- "Firmware version (%u.%u) is predates our first public release.",
- buffer[0], buffer[1]);
+ "Firmware version (%u.%u) predates our first public release.",
+ atusb->fw_ver_maj, atusb->fw_ver_min);
dev_info(&usb_dev->dev, "Please update to version 0.2 or newer");
}
@@ -669,6 +695,43 @@ fail:
return -ENODEV;
}
+static int atusb_set_extended_addr(struct atusb *atusb)
+{
+ struct usb_device *usb_dev = atusb->usb_dev;
+ unsigned char buffer[IEEE802154_EXTENDED_ADDR_LEN];
+ __le64 extended_addr;
+ u64 addr;
+ int ret;
+
+ /* Firmware versions before 0.3 do not support the EUI64_READ command.
+ * Just use a random address and be done */
+ if (atusb->fw_ver_maj == 0 && atusb->fw_ver_min < 3) {
+ ieee802154_random_extended_addr(&atusb->hw->phy->perm_extended_addr);
+ return 0;
+ }
+
+ /* Firmware is new enough so we fetch the address from EEPROM */
+ ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
+ ATUSB_EUI64_READ, ATUSB_REQ_FROM_DEV, 0, 0,
+ buffer, IEEE802154_EXTENDED_ADDR_LEN, 1000);
+ if (ret < 0)
+ dev_err(&usb_dev->dev, "failed to fetch extended address\n");
+
+ memcpy(&extended_addr, buffer, IEEE802154_EXTENDED_ADDR_LEN);
+ /* Check if read address is not empty and the unicast bit is set correctly */
+ if (!ieee802154_is_valid_extended_unicast_addr(extended_addr)) {
+ dev_info(&usb_dev->dev, "no permanent extended address found, random address set\n");
+ ieee802154_random_extended_addr(&atusb->hw->phy->perm_extended_addr);
+ } else {
+ atusb->hw->phy->perm_extended_addr = extended_addr;
+ addr = swab64((__force u64)atusb->hw->phy->perm_extended_addr);
+ dev_info(&usb_dev->dev, "Read permanent extended address %8phC from device\n",
+ &addr);
+ }
+
+ return ret;
+}
+
/* ----- Setup ------------------------------------------------------------- */
static int atusb_probe(struct usb_interface *interface,
@@ -707,7 +770,8 @@ static int atusb_probe(struct usb_interface *interface,
hw->parent = &usb_dev->dev;
hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT |
- IEEE802154_HW_PROMISCUOUS | IEEE802154_HW_CSMA_PARAMS;
+ IEEE802154_HW_PROMISCUOUS | IEEE802154_HW_CSMA_PARAMS |
+ IEEE802154_HW_FRAME_RETRIES;
hw->phy->flags = WPAN_PHY_FLAG_TXPOWER | WPAN_PHY_FLAG_CCA_ED_LEVEL |
WPAN_PHY_FLAG_CCA_MODE;
@@ -728,13 +792,14 @@ static int atusb_probe(struct usb_interface *interface,
hw->phy->supported.tx_powers = atusb_powers;
hw->phy->supported.tx_powers_size = ARRAY_SIZE(atusb_powers);
hw->phy->transmit_power = hw->phy->supported.tx_powers[0];
- ieee802154_random_extended_addr(&hw->phy->perm_extended_addr);
hw->phy->cca_ed_level = hw->phy->supported.cca_ed_levels[7];
atusb_command(atusb, ATUSB_RF_RESET, 0);
atusb_get_and_show_chip(atusb);
atusb_get_and_show_revision(atusb);
atusb_get_and_show_build(atusb);
+ atusb_set_extended_addr(atusb);
+
ret = atusb_get_and_clear_error(atusb);
if (ret) {
dev_err(&atusb->usb_dev->dev,
diff --git a/drivers/net/ieee802154/atusb.h b/drivers/net/ieee802154/atusb.h
index 0690edcad57b..b22bbaa77590 100644
--- a/drivers/net/ieee802154/atusb.h
+++ b/drivers/net/ieee802154/atusb.h
@@ -13,8 +13,8 @@
* Firmware: ben-wpan/atusb/fw/include/atusb/atusb.h
*/
-#ifndef _ATUSB_H
-#define _ATUSB_H
+#ifndef _ATUSB_H
+#define _ATUSB_H
#define ATUSB_VENDOR_ID 0x20b7 /* Qi Hardware*/
#define ATUSB_PRODUCT_ID 0x1540 /* 802.15.4, device 0 */
@@ -46,9 +46,12 @@ enum atusb_requests {
ATUSB_SPI_WRITE2_SYNC,
ATUSB_RX_MODE = 0x40, /* HardMAC group */
ATUSB_TX,
+ ATUSB_EUI64_WRITE = 0x50, /* Parameter in EEPROM grp */
+ ATUSB_EUI64_READ,
};
-/* Direction bRequest wValue wIndex wLength
+/*
+ * Direction bRequest wValue wIndex wLength
*
* ->host ATUSB_ID - - 3
* ->host ATUSB_BUILD - - #bytes
@@ -76,6 +79,8 @@ enum atusb_requests {
*
* host-> ATUSB_RX_MODE on - 0
* host-> ATUSB_TX flags ack_seq #bytes
+ * host-> ATUSB_EUI64_WRITE - - #bytes (8)
+ * ->host ATUSB_EUI64_READ - - #bytes (8)
*/
#define ATUSB_REQ_FROM_DEV (USB_TYPE_VENDOR | USB_DIR_IN)
diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c
index 43faf2aea2ab..fae391f1871f 100644
--- a/net/bluetooth/smp.c
+++ b/net/bluetooth/smp.c
@@ -57,7 +57,7 @@
#define SMP_TIMEOUT msecs_to_jiffies(30000)
#define AUTH_REQ_MASK(dev) (hci_dev_test_flag(dev, HCI_SC_ENABLED) ? \
- 0x1f : 0x07)
+ 0x3f : 0x07)
#define KEY_DIST_MASK 0x07
/* Maximum message length that can be passed to aes_cmac */
@@ -76,6 +76,7 @@ enum {
SMP_FLAG_DHKEY_PENDING,
SMP_FLAG_REMOTE_OOB,
SMP_FLAG_LOCAL_OOB,
+ SMP_FLAG_CT2,
};
struct smp_dev {
@@ -357,6 +358,22 @@ static int smp_h6(struct crypto_shash *tfm_cmac, const u8 w[16],
return err;
}
+static int smp_h7(struct crypto_shash *tfm_cmac, const u8 w[16],
+ const u8 salt[16], u8 res[16])
+{
+ int err;
+
+ SMP_DBG("w %16phN salt %16phN", w, salt);
+
+ err = aes_cmac(tfm_cmac, salt, w, 16, res);
+ if (err)
+ return err;
+
+ SMP_DBG("res %16phN", res);
+
+ return err;
+}
+
/* The following functions map to the legacy SMP crypto functions e, c1,
* s1 and ah.
*/
@@ -1130,20 +1147,31 @@ static void sc_add_ltk(struct smp_chan *smp)
static void sc_generate_link_key(struct smp_chan *smp)
{
- /* These constants are as specified in the core specification.
- * In ASCII they spell out to 'tmp1' and 'lebr'.
- */
- const u8 tmp1[4] = { 0x31, 0x70, 0x6d, 0x74 };
+ /* From core spec. Spells out in ASCII as 'lebr'. */
const u8 lebr[4] = { 0x72, 0x62, 0x65, 0x6c };
smp->link_key = kzalloc(16, GFP_KERNEL);
if (!smp->link_key)
return;
- if (smp_h6(smp->tfm_cmac, smp->tk, tmp1, smp->link_key)) {
- kzfree(smp->link_key);
- smp->link_key = NULL;
- return;
+ if (test_bit(SMP_FLAG_CT2, &smp->flags)) {
+ /* SALT = 0x00000000000000000000000000000000746D7031 */
+ const u8 salt[16] = { 0x31, 0x70, 0x6d, 0x74 };
+
+ if (smp_h7(smp->tfm_cmac, smp->tk, salt, smp->link_key)) {
+ kzfree(smp->link_key);
+ smp->link_key = NULL;
+ return;
+ }
+ } else {
+ /* From core spec. Spells out in ASCII as 'tmp1'. */
+ const u8 tmp1[4] = { 0x31, 0x70, 0x6d, 0x74 };
+
+ if (smp_h6(smp->tfm_cmac, smp->tk, tmp1, smp->link_key)) {
+ kzfree(smp->link_key);
+ smp->link_key = NULL;
+ return;
+ }
}
if (smp_h6(smp->tfm_cmac, smp->link_key, lebr, smp->link_key)) {
@@ -1169,10 +1197,7 @@ static void smp_allow_key_dist(struct smp_chan *smp)
static void sc_generate_ltk(struct smp_chan *smp)
{
- /* These constants are as specified in the core specification.
- * In ASCII they spell out to 'tmp2' and 'brle'.
- */
- const u8 tmp2[4] = { 0x32, 0x70, 0x6d, 0x74 };
+ /* From core spec. Spells out in ASCII as 'brle'. */
const u8 brle[4] = { 0x65, 0x6c, 0x72, 0x62 };
struct hci_conn *hcon = smp->conn->hcon;
struct hci_dev *hdev = hcon->hdev;
@@ -1187,8 +1212,19 @@ static void sc_generate_ltk(struct smp_chan *smp)
if (key->type == HCI_LK_DEBUG_COMBINATION)
set_bit(SMP_FLAG_DEBUG_KEY, &smp->flags);
- if (smp_h6(smp->tfm_cmac, key->val, tmp2, smp->tk))
- return;
+ if (test_bit(SMP_FLAG_CT2, &smp->flags)) {
+ /* SALT = 0x00000000000000000000000000000000746D7032 */
+ const u8 salt[16] = { 0x32, 0x70, 0x6d, 0x74 };
+
+ if (smp_h7(smp->tfm_cmac, key->val, salt, smp->tk))
+ return;
+ } else {
+ /* From core spec. Spells out in ASCII as 'tmp2'. */
+ const u8 tmp2[4] = { 0x32, 0x70, 0x6d, 0x74 };
+
+ if (smp_h6(smp->tfm_cmac, key->val, tmp2, smp->tk))
+ return;
+ }
if (smp_h6(smp->tfm_cmac, smp->tk, brle, smp->tk))
return;
@@ -1669,6 +1705,7 @@ static void build_bredr_pairing_cmd(struct smp_chan *smp,
if (!rsp) {
memset(req, 0, sizeof(*req));
+ req->auth_req = SMP_AUTH_CT2;
req->init_key_dist = local_dist;
req->resp_key_dist = remote_dist;
req->max_key_size = conn->hcon->enc_key_size;
@@ -1680,6 +1717,7 @@ static void build_bredr_pairing_cmd(struct smp_chan *smp,
memset(rsp, 0, sizeof(*rsp));
+ rsp->auth_req = SMP_AUTH_CT2;
rsp->max_key_size = conn->hcon->enc_key_size;
rsp->init_key_dist = req->init_key_dist & remote_dist;
rsp->resp_key_dist = req->resp_key_dist & local_dist;
@@ -1744,6 +1782,9 @@ static u8 smp_cmd_pairing_req(struct l2cap_conn *conn, struct sk_buff *skb)
build_bredr_pairing_cmd(smp, req, &rsp);
+ if (req->auth_req & SMP_AUTH_CT2)
+ set_bit(SMP_FLAG_CT2, &smp->flags);
+
key_size = min(req->max_key_size, rsp.max_key_size);
if (check_enc_key_size(conn, key_size))
return SMP_ENC_KEY_SIZE;
@@ -1761,9 +1802,13 @@ static u8 smp_cmd_pairing_req(struct l2cap_conn *conn, struct sk_buff *skb)
build_pairing_cmd(conn, req, &rsp, auth);
- if (rsp.auth_req & SMP_AUTH_SC)
+ if (rsp.auth_req & SMP_AUTH_SC) {
set_bit(SMP_FLAG_SC, &smp->flags);
+ if (rsp.auth_req & SMP_AUTH_CT2)
+ set_bit(SMP_FLAG_CT2, &smp->flags);
+ }
+
if (conn->hcon->io_capability == HCI_IO_NO_INPUT_OUTPUT)
sec_level = BT_SECURITY_MEDIUM;
else
@@ -1917,6 +1962,9 @@ static u8 smp_cmd_pairing_rsp(struct l2cap_conn *conn, struct sk_buff *skb)
*/
smp->remote_key_dist &= rsp->resp_key_dist;
+ if ((req->auth_req & SMP_AUTH_CT2) && (auth & SMP_AUTH_CT2))
+ set_bit(SMP_FLAG_CT2, &smp->flags);
+
/* For BR/EDR this means we're done and can start phase 3 */
if (conn->hcon->type == ACL_LINK) {
/* Clear bits which are generated but not distributed */
@@ -2312,8 +2360,11 @@ int smp_conn_security(struct hci_conn *hcon, __u8 sec_level)
authreq = seclevel_to_authreq(sec_level);
- if (hci_dev_test_flag(hcon->hdev, HCI_SC_ENABLED))
+ if (hci_dev_test_flag(hcon->hdev, HCI_SC_ENABLED)) {
authreq |= SMP_AUTH_SC;
+ if (hci_dev_test_flag(hcon->hdev, HCI_SSP_ENABLED))
+ authreq |= SMP_AUTH_CT2;
+ }
/* Require MITM if IO Capability allows or the security level
* requires it.
diff --git a/net/bluetooth/smp.h b/net/bluetooth/smp.h
index ffcc70b6b199..0ff6247eaa6c 100644
--- a/net/bluetooth/smp.h
+++ b/net/bluetooth/smp.h
@@ -57,6 +57,7 @@ struct smp_cmd_pairing {
#define SMP_AUTH_MITM 0x04
#define SMP_AUTH_SC 0x08
#define SMP_AUTH_KEYPRESS 0x10
+#define SMP_AUTH_CT2 0x20
#define SMP_CMD_PAIRING_CONFIRM 0x03
struct smp_cmd_pairing_confirm {