mmc: host: Fix typos in comments across various files

This patch corrects several typos in comments within the mmc/host
directory. No functional changes are introduced, only comment
improvements for better readability.

Detected using codespell.

Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20240929093418.526901-1-yujiaoliang@vivo.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

8 files changed, 9 insertions, 9 deletions

diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 204055b3c042..fc360902729d 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -860,7 +860,7 @@ static void atmci_send_stop_cmd(struct atmel_mci *host, struct mmc_data *data)
 }
 
 /*
- * Configure given PDC buffer taking care of alignement issues.
+ * Configure given PDC buffer taking care of alignment issues.
  * Update host->data_size and host->sg.
  */
 static void atmci_pdc_set_single_buf(struct atmel_mci *host,
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index 27c666eab506..057d42307832 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -543,7 +543,7 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
 					cmd->resp[i] |= (r[i + 1] & 0xFF000000) >> 24;
 			}
 		} else {
-			/* Techincally, we should be getting all 48 bits of
+			/* Technically, we should be getting all 48 bits of
 			 * the response (SD_RESP1 + SD_RESP2), but because
 			 * our response omits the CRC, our data ends up
 			 * being shifted 8 bits to the right.  In this case,
diff --git a/drivers/mmc/host/cavium-octeon.c b/drivers/mmc/host/cavium-octeon.c
index 72817c5f4578..0592f356b1e5 100644
--- a/drivers/mmc/host/cavium-octeon.c
+++ b/drivers/mmc/host/cavium-octeon.c
@@ -217,7 +217,7 @@ static int octeon_mmc_probe(struct platform_device *pdev)
 		return PTR_ERR(base);
 	host->dma_base = base;
 	/*
-	 * To keep the register addresses shared we intentionaly use
+	 * To keep the register addresses shared we intentionally use
 	 * a negative offset here, first register used on Octeon therefore
 	 * starts at 0x20 (MIO_EMM_DMA_CFG).
 	 */
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 41e451235f63..aab1a8df6414 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1182,7 +1182,7 @@ static void dw_mci_submit_data(struct dw_mci *host, struct mmc_data *data)
 		/*
 		 * Use the initial fifoth_val for PIO mode. If wm_algined
 		 * is set, we set watermark same as data size.
-		 * If next issued data may be transfered by DMA mode,
+		 * If next issued data may be transferred by DMA mode,
 		 * prev_blksz should be invalidated.
 		 */
 		if (host->wm_aligned)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index a9e7c8ddc5a1..694bb443d5f3 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -879,7 +879,7 @@ static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	/*
 	 * The memory at the end of the controller used as bounce buffer for
 	 * the dram_access_quirk only accepts 32bit read/write access,
-	 * check the aligment and length of the data before starting the request.
+	 * check the alignment and length of the data before starting the request.
 	 */
 	if (host->dram_access_quirk && mrq->data) {
 		mrq->cmd->error = meson_mmc_validate_dram_access(mmc, mrq->data);
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index a5eb4ced4d5d..4d3647f9ec06 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -77,7 +77,7 @@
 #define MCI_CPSM_INTERRUPT	BIT(8)
 #define MCI_CPSM_PENDING	BIT(9)
 #define MCI_CPSM_ENABLE		BIT(10)
-/* Command register flag extenstions in the ST Micro versions */
+/* Command register flag extensions in the ST Micro versions */
 #define MCI_CPSM_ST_SDIO_SUSP		BIT(11)
 #define MCI_CPSM_ST_ENCMD_COMPL		BIT(12)
 #define MCI_CPSM_ST_NIEN		BIT(13)
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index fea994da8bf8..c7582ad45123 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -1529,7 +1529,7 @@ static void sdhci_esdhc_imx_hwinit(struct sdhci_host *host)
 			writel(tmp, host->ioaddr + ESDHC_TUNING_CTRL);
 		} else if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING) {
 			/*
-			 * ESDHC_STD_TUNING_EN may be configed in bootloader
+			 * ESDHC_STD_TUNING_EN may be configured in bootloader
 			 * or ROM code, so clear this bit here to make sure
 			 * the manual tuning can work.
 			 */
@@ -1631,7 +1631,7 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
 
 	/*
 	 * If we have this property, then activate WP check.
-	 * Retrieveing and requesting the actual WP GPIO will happen
+	 * Retrieving and requesting the actual WP GPIO will happen
 	 * in the call to mmc_of_parse().
 	 */
 	if (of_property_read_bool(np, "wp-gpios"))
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 8dd180a42f72..e00208535bd1 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -2601,7 +2601,7 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 	sdhci_msm_handle_pwr_irq(host, 0);
 
 	/*
-	 * Ensure that above writes are propogated before interrupt enablement
+	 * Ensure that above writes are propagated before interrupt enablement
 	 * in GIC.
 	 */
 	mb();