/*
* linux/drivers/char/serial_core.h
*
* Copyright (C) 2000 Deep Blue Solutions Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef LINUX_SERIAL_CORE_H
#define LINUX_SERIAL_CORE_H
/*
* The type definitions. These are from Ted Ts'o's serial.h
*/
#define PORT_UNKNOWN 0
#define PORT_8250 1
#define PORT_16450 2
#define PORT_16550 3
#define PORT_16550A 4
#define PORT_CIRRUS 5
#define PORT_16650 6
#define PORT_16650V2 7
#define PORT_16750 8
#define PORT_STARTECH 9
#define PORT_16C950 10
#define PORT_16654 11
#define PORT_16850 12
#define PORT_RSA 13
#define PORT_NS16550A 14
#define PORT_XSCALE 15
#define PORT_MAX_8250 15 /* max port ID */
/*
* ARM specific type numbers. These are not currently guaranteed
* to be implemented, and will change in the future. These are
* separate so any additions to the old serial.c that occur before
* we are merged can be easily merged here.
*/
#define PORT_PXA 31
#define PORT_AMBA 32
#define PORT_CLPS711X 33
#define PORT_SA1100 34
#define PORT_UART00 35
#define PORT_21285 37
/* Sparc type numbers. */
#define PORT_SUNZILOG 38
#define PORT_SUNSAB 39
/* NEC v850. */
#define PORT_V850E_UART 40
/* DZ */
#define PORT_DZ 47
/* Parisc type numbers. */
#define PORT_MUX 48
/* Macintosh Zilog type numbers */
#define PORT_MAC_ZILOG 50 /* m68k : not yet implemented */
#define PORT_PMAC_ZILOG 51
/* SH-SCI */
#define PORT_SCI 52
#define PORT_SCIF 53
#define PORT_IRDA 54
/* Samsung S3C2410 SoC and derivatives thereof */
#define PORT_S3C2410 55
/* SGI IP22 aka Indy / Challenge S / Indigo 2 */
#define PORT_IP22ZILOG 56
/* Sharp LH7a40x -- an ARM9 SoC series */
#define PORT_LH7A40X 57
/* PPC CPM type number */
#define PORT_CPM 58
/* MPC52xx type numbers */
#define PORT_MPC52xx 59
/* IBM icom */
#define PORT_ICOM 60
/* Samsung S3C2440 SoC */
#define PORT_S3C2440 61
/* Motorola i.MX SoC */
#define PORT_IMX 62
/* Marvell MPSC */
#define PORT_MPSC 63
/* TXX9 type number */
#define PORT_TXX9 64
/* NEC VR4100 series SIU/DSIU */
#define PORT_VR41XX_SIU 65
#define PORT_VR41XX_DSIU 66
/* Samsung S3C2400 SoC */
#define PORT_S3C2400 67
/* M32R SIO */
#define PORT_M32R_SIO 68
/*Digi jsm */
#define PORT_JSM 65
#ifdef __KERNEL__
#include <linux/config.h>
#include <linux/interrupt.h>
#include <linux/circ_buf.h>
#include <linux/spinlock.h>
#include <linux/sched.h>
#include <linux/tty.h>
struct uart_port;
struct uart_info;
struct serial_struct;
struct device;
/*
* This structure describes all the operations that can be
* done on the physical hardware.
*/
struct uart_ops {
unsigned int (*tx_empty)(struct uart_port *);
void (*set_mctrl)(struct uart_port *, unsigned int mctrl);
unsigned int (*get_mctrl)(struct uart_port *);
void (*stop_tx)(struct uart_port *, unsigned int tty_stop);
void (*start_tx)(struct uart_port *, unsigned int tty_start);
void (*send_xchar)(struct uart_port *, char ch);
void (*stop_rx)(struct uart_port *);
void (*enable_ms)(struct uart_port *);
void (*break_ctl)(struct uart_port *, int ctl);
int (*startup)(struct uart_port *);
void (*shutdown)(struct uart_port *);
void (*set_termios)(struct uart_port *, struct termios *new,
struct termios *old);
void (*pm)(struct uart_port *, unsigned int state,
unsigned int oldstate);
int (*set_wake)(struct uart_port *, unsigned int state);
/*
* Return a string describing the type of the port
*/
const char *(*type)(struct uart_port *);
/*
* Release IO and memory resources used by the port.
* This includes iounmap if necessary.
*/
void (*release_port)(struct uart_port *);
/*
* Request IO and memory resources used by the port.
* This includes iomapping the port if necessary.
*/
int (*request_port)(struct uart_port *);
void (*config_port)(struct uart_port *, int);
int (*verify_port)(struct uart_port *, struct serial_struct *);
int (*ioctl)(struct uart_port *, unsigned int, unsigned long);
};
#define UART_CONFIG_TYPE (1 << 0)
#define UART_CONFIG_IRQ (1 << 1)
struct uart_icount {
__u32 cts;
__u32 dsr;
__u32 rng;
__u32 dcd;
__u32 rx;
__u32 tx;
__u32 frame;
__u32 overrun;
__u32 parity;
__u32 brk;
__u32 buf_overrun;
};
struct uart_port {
spinlock_t lock; /* port lock */
unsigned int iobase; /* in/out[bwl] */
unsigned char __iomem *membase; /* read/write[bwl] */
unsigned int irq; /* irq number */
unsigned int uartclk; /* base uart clock */
unsigned char fifosize; /* tx fifo size */
unsigned char x_char; /* xon/xoff char */
unsigned char regshift; /* reg offset shift */
unsigned char iotype; /* io access style */
#define UPIO_PORT (0)
#define UPIO_HUB6 (1)
#define UPIO_MEM (2)
#define UPIO_MEM32 (3)
unsigned int read_status_mask; /* driver specific */
unsigned int ignore_status_mask; /* driver specific */
struct uart_info *info; /* pointer to parent info */
struct uart_icount icount; /* statistics */
struct console *cons; /* struct console, if any */
#ifdef CONFIG_SERIAL_CORE_CONSOLE
unsigned long sysrq; /* sysrq timeout */
#endif
unsigned int flags;
#define UPF_FOURPORT (1 << 1)
#define UPF_SAK (1 << 2)
#define UPF_SPD_MASK (0x1030)
#define UPF_SPD_HI (0x0010)
#define UPF_SPD_VHI (0x0020)
#define UPF_SPD_CUST (0x0030)
#define UPF_SPD_SHI (0x1000)
#define UPF_SPD_WARP (0x1010)
#define UPF_SKIP_TEST (1 << 6)
#define UPF_AUTO_IRQ (1 << 7)
#define UPF_HARDPPS_CD (1 << 11)
#define UPF_LOW_LATENCY (1 << 13)
#define UPF_BUGGY_UART (1 << 14)
#define UPF_AUTOPROBE (1 << 15)
#define UPF_MAGIC_MULTIPLIER (1 << 16)
#define UPF_BOOT_ONLYMCA (1 << 22)
#define UPF_CONS_FLOW (1 << 23)
#define UPF_SHARE_IRQ (1 << 24)
#define UPF_BOOT_AUTOCONF (1 << 28)
#define UPF_IOREMAP (1 << 31)
#define UPF_CHANGE_MASK (0x17fff)
#define UPF_USR_MASK (UPF_SPD_MASK|UPF_LOW_LATENCY)
unsigned int mctrl; /* current modem ctrl settings */
unsigned int timeout; /* character-based timeout */
unsigned int type; /* port type */
struct uart_ops *ops;
unsigned int custom_divisor;
unsigned int line; /* port index */
unsigned long mapbase; /* for ioremap */
struct device *dev; /* parent device */
unsigned char hub6; /* this should be in the 8250 driver */
unsigned char unused[3];
};
/*
* This is the state information which is persistent across opens.
* The low level driver must not to touch any elements contained
* within.
*/
struct uart_state {
unsigned int close_delay; /* msec */
unsigned int closing_wait; /* msec */
#define USF_CLOSING_WAIT_INF (0)
#define USF_CLOSING_WAIT_NONE (~0U)
int count;
int pm_state;
struct uart_info *info;
struct uart_port *port;
struct semaphore sem;
};
#define UART_XMIT_SIZE PAGE_SIZE
/*
* This is the state information which is only valid when the port
* is open; it may be freed by the core driver once the device has
* been closed. Either the low level driver or the core can modify
* stuff here.
*/
struct uart_info {
struct tty_struct *tty;
struct circ_buf xmit;
unsigned int flags;
/*
* These are the flags that specific to info->flags, and reflect our
* internal state. They can not be accessed via port->flags. Low
* level drivers must not change these, but may query them instead.
*/
#define UIF_CHECK_CD (1 << 25)
#define UIF_CTS_FLOW (1 << 26)
#define UIF_NORMAL_ACTIVE (1 << 29)
#define UIF_INITIALIZED (1 << 31)
int blocked_open;
struct tasklet_struct tlet;
wait_queue_head_t open_wait;
wait_queue_head_t delta_msr_wait;
};
/* number of characters left in xmit buffer before we ask for more */
#define WAKEUP_CHARS 256
struct module;
struct tty_driver;
struct uart_driver {
struct module *owner;
const char *driver_name;
const char *dev_name;
const char *devfs_name;
int major;
int minor;
int nr;
struct console *cons;
/*
* these are private; the low level driver should not
* touch these; they should be initialised to NULL
*/
struct uart_state *state;
struct tty_driver *tty_driver;
};
void uart_write_wakeup(struct uart_port *port);
/*
* Baud rate helpers.
*/
void uart_update_timeout(struct uart_port *port, unsigned int cflag,
unsigned int baud);
unsigned int uart_get_baud_rate(struct uart_port *port, struct termios *termios,
struct termios *old, unsigned int min,
unsigned int max);
unsigned int uart_get_divisor(struct uart_port *port, unsigned int baud);
/*
* Console helpers.
*/
struct uart_port *uart_get_console(struct uart_port *ports, int nr,
struct console *c);
void uart_parse_options(char *options, int *baud, int *parity, int *bits,
int *flow);
int uart_set_options(struct uart_port *port, struct console *co, int baud,
int parity, int bits, int flow);
struct tty_driver *uart_console_device(struct console *co, int *index);
/*
* Port/driver registration/removal
*/
int uart_register_driver(struct uart_driver *uart);
void uart_unregister_driver(struct uart_driver *uart);
void uart_unregister_port(struct uart_driver *reg, int line);
int uart_register_port(struct uart_driver *reg, struct uart_port *port);
int uart_add_one_port(struct uart_driver *reg, struct uart_port *port);
int uart_remove_one_port(struct uart_driver *reg, struct uart_port *port);
int uart_match_port(struct uart_port *port1, struct uart_port *port2);
/*
* Power Management
*/
int uart_suspend_port(struct uart_driver *reg, struct uart_port *port);
int uart_resume_port(struct uart_driver *reg, struct uart_port *port);
#define uart_circ_empty(circ) ((circ)->head == (circ)->tail)
#define uart_circ_clear(circ) ((circ)->head = (circ)->tail = 0)
#define uart_circ_chars_pending(circ) \
(CIRC_CNT((circ)->head, (circ)->tail, UART_XMIT_SIZE))
#define uart_circ_chars_free(circ) \
(CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE))
#define uart_tx_stopped(port) \
((port)->info->tty->stopped || (port)->info->tty->hw_stopped)
/*
* The following are helper functions for the low level drivers.
*/
#ifdef SUPPORT_SYSRQ
static inline int
uart_handle_sysrq_char(struct uart_port *port, unsigned int ch,
struct pt_regs *regs)
{
if (port->sysrq) {
if (ch && time_before(jiffies, port->sysrq)) {
handle_sysrq(ch, regs, NULL);
port->sysrq = 0;
return 1;
}
port->sysrq = 0;
}
return 0;
}
#else
#define uart_handle_sysrq_char(port,ch,regs) (0)
#endif
/*
* We do the SysRQ and SAK checking like this...
*/
static inline int uart_handle_break(struct uart_port *port)
{
struct uart_info *info = port->info;
#ifdef SUPPORT_SYSRQ
if (port->cons && port->cons->index == port->line) {
if (!port->sysrq) {
port->sysrq = jiffies + HZ*5;
return 1;
}
port->sysrq = 0;
}
#endif
if (info->flags & UPF_SAK)
do_SAK(info->tty);
return 0;
}
/**
* uart_handle_dcd_change - handle a change of carrier detect state
* @port: uart_port structure for the open port
* @status: new carrier detect status, nonzero if active
*/
static inline void
uart_handle_dcd_change(struct uart_port *port, unsigned int status)
{
struct uart_info *info = port->info;
port->icount.dcd++;
#ifdef CONFIG_HARD_PPS
if ((port->flags & UPF_HARDPPS_CD) && status)
hardpps();
#endif
if (info->flags & UIF_CHECK_CD) {
if (status)
wake_up_interruptible(&info->open_wait);
else if (info->tty)
tty_hangup(info->tty);
}
}
/**
* uart_handle_cts_change - handle a change of clear-to-send state
* @port: uart_port structure for the open port
* @status: new clear to send status, nonzero if active
*/
static inline void
uart_handle_cts_change(struct uart_port *port, unsigned int status)
{
struct uart_info *info = port->info;
struct tty_struct *tty = info->tty;
port->icount.cts++;
if (info->flags & UIF_CTS_FLOW) {
if (tty->hw_stopped) {
if (status) {
tty->hw_stopped = 0;
port->ops->start_tx(port, 0);
uart_write_wakeup(port);
}
} else {
if (!status) {
tty->hw_stopped = 1;
port->ops->stop_tx(port, 0);
}
}
}
}
#include <linux/tty_flip.h>
static inline void
uart_insert_char(struct uart_port *port, unsigned int status,
unsigned int overrun, unsigned int ch, unsigned int flag)
{
struct tty_struct *tty = port->info->tty;
if ((status & port->ignore_status_mask & ~overrun) == 0)
tty_insert_flip_char(tty, ch, flag);
/*
* Overrun is special. Since it's reported immediately,
* it doesn't affect the current character.
*/
if (status & ~port->ignore_status_mask & overrun)
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
}
/*
* UART_ENABLE_MS - determine if port should enable modem status irqs
*/
#define UART_ENABLE_MS(port,cflag) ((port)->flags & UPF_HARDPPS_CD || \
(cflag) & CRTSCTS || \
!((cflag) & CLOCAL))
#endif
#endif /* LINUX_SERIAL_CORE_H */
