1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* Samsung SoC USB 1.1/2.0 PHY driver - Exynos 4210 support
*
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
* Author: Kamil Debski <k.debski@samsung.com>
*/
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/phy/phy.h>
#include <linux/regmap.h>
#include "phy-samsung-usb2.h"
/* Exynos USB PHY registers */
/* PHY power control */
#define EXYNOS_4210_UPHYPWR 0x0
#define EXYNOS_4210_UPHYPWR_PHY0_SUSPEND BIT(0)
#define EXYNOS_4210_UPHYPWR_PHY0_PWR BIT(3)
#define EXYNOS_4210_UPHYPWR_PHY0_OTG_PWR BIT(4)
#define EXYNOS_4210_UPHYPWR_PHY0_SLEEP BIT(5)
#define EXYNOS_4210_UPHYPWR_PHY0 ( \
EXYNOS_4210_UPHYPWR_PHY0_SUSPEND | \
EXYNOS_4210_UPHYPWR_PHY0_PWR | \
EXYNOS_4210_UPHYPWR_PHY0_OTG_PWR | \
EXYNOS_4210_UPHYPWR_PHY0_SLEEP)
#define EXYNOS_4210_UPHYPWR_PHY1_SUSPEND BIT(6)
#define EXYNOS_4210_UPHYPWR_PHY1_PWR BIT(7)
#define EXYNOS_4210_UPHYPWR_PHY1_SLEEP BIT(8)
#define EXYNOS_4210_UPHYPWR_PHY1 ( \
EXYNOS_4210_UPHYPWR_PHY1_SUSPEND | \
EXYNOS_4210_UPHYPWR_PHY1_PWR | \
EXYNOS_4210_UPHYPWR_PHY1_SLEEP)
#define EXYNOS_4210_UPHYPWR_HSIC0_SUSPEND BIT(9)
#define EXYNOS_4210_UPHYPWR_HSIC0_SLEEP BIT(10)
#define EXYNOS_4210_UPHYPWR_HSIC0 ( \
EXYNOS_4210_UPHYPWR_HSIC0_SUSPEND | \
EXYNOS_4210_UPHYPWR_HSIC0_SLEEP)
#define EXYNOS_4210_UPHYPWR_HSIC1_SUSPEND BIT(11)
#define EXYNOS_4210_UPHYPWR_HSIC1_SLEEP BIT(12)
#define EXYNOS_4210_UPHYPWR_HSIC1 ( \
EXYNOS_4210_UPHYPWR_HSIC1_SUSPEND | \
EXYNOS_4210_UPHYPWR_HSIC1_SLEEP)
/* PHY clock control */
#define EXYNOS_4210_UPHYCLK 0x4
#define EXYNOS_4210_UPHYCLK_PHYFSEL_MASK (0x3 << 0)
#define EXYNOS_4210_UPHYCLK_PHYFSEL_OFFSET 0
#define EXYNOS_4210_UPHYCLK_PHYFSEL_48MHZ (0x0 << 0)
#define EXYNOS_4210_UPHYCLK_PHYFSEL_24MHZ (0x3 << 0)
#define EXYNOS_4210_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0)
#define EXYNOS_4210_UPHYCLK_PHY0_ID_PULLUP BIT(2)
#define EXYNOS_4210_UPHYCLK_PHY0_COMMON_ON BIT(4)
#define EXYNOS_4210_UPHYCLK_PHY1_COMMON_ON BIT(7)
/* PHY reset control */
#define EXYNOS_4210_UPHYRST 0x8
#define EXYNOS_4210_URSTCON_PHY0 BIT(0)
#define EXYNOS_4210_URSTCON_OTG_HLINK BIT(1)
#define EXYNOS_4210_URSTCON_OTG_PHYLINK BIT(2)
#define EXYNOS_4210_URSTCON_PHY1_ALL BIT(3)
#define EXYNOS_4210_URSTCON_PHY1_P0 BIT(4)
#define EXYNOS_4210_URSTCON_PHY1_P1P2 BIT(5)
#define EXYNOS_4210_URSTCON_HOST_LINK_ALL BIT(6)
#define EXYNOS_4210_URSTCON_HOST_LINK_P0 BIT(7)
#define EXYNOS_4210_URSTCON_HOST_LINK_P1 BIT(8)
#define EXYNOS_4210_URSTCON_HOST_LINK_P2 BIT(9)
/* Isolation, configured in the power management unit */
#define EXYNOS_4210_USB_ISOL_DEVICE_OFFSET 0x704
#define EXYNOS_4210_USB_ISOL_DEVICE BIT(0)
#define EXYNOS_4210_USB_ISOL_HOST_OFFSET 0x708
#define EXYNOS_4210_USB_ISOL_HOST BIT(0)
/* USBYPHY1 Floating prevention */
#define EXYNOS_4210_UPHY1CON 0x34
#define EXYNOS_4210_UPHY1CON_FLOAT_PREVENTION 0x1
/* Mode switching SUB Device <-> Host */
#define EXYNOS_4210_MODE_SWITCH_OFFSET 0x21c
#define EXYNOS_4210_MODE_SWITCH_MASK 1
#define EXYNOS_4210_MODE_SWITCH_DEVICE 0
#define EXYNOS_4210_MODE_SWITCH_HOST 1
enum exynos4210_phy_id {
EXYNOS4210_DEVICE,
EXYNOS4210_HOST,
EXYNOS4210_HSIC0,
EXYNOS4210_HSIC1,
EXYNOS4210_NUM_PHYS,
};
/*
* exynos4210_rate_to_clk() converts the supplied clock rate to the value that
* can be written to the phy register.
*/
static int exynos4210_rate_to_clk(unsigned long rate, u32 *reg)
{
switch (rate) {
case 12 * MHZ:
*reg = EXYNOS_4210_UPHYCLK_PHYFSEL_12MHZ;
break;
case 24 * MHZ:
*reg = EXYNOS_4210_UPHYCLK_PHYFSEL_24MHZ;
break;
case 48 * MHZ:
*reg = EXYNOS_4210_UPHYCLK_PHYFSEL_48MHZ;
break;
default:
return -EINVAL;
}
return 0;
}
static void exynos4210_isol(struct samsung_usb2_phy_instance *inst, bool on)
{
struct samsung_usb2_phy_driver *drv = inst->drv;
u32 offset;
u32 mask;
switch (inst->cfg->id) {
case EXYNOS4210_DEVICE:
offset = EXYNOS_4210_USB_ISOL_DEVICE_OFFSET;
mask = EXYNOS_4210_USB_ISOL_DEVICE;
break;
case EXYNOS4210_HOST:
offset = EXYNOS_4210_USB_ISOL_HOST_OFFSET;
mask = EXYNOS_4210_USB_ISOL_HOST;
break;
default:
return;
}
regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask);
}
static void exynos4210_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on)
{
struct samsung_usb2_phy_driver *drv = inst->drv;
u32 rstbits = 0;
u32 phypwr = 0;
u32 rst;
u32 pwr;
u32 clk;
switch (inst->cfg->id) {
case EXYNOS4210_DEVICE:
phypwr = EXYNOS_4210_UPHYPWR_PHY0;
rstbits = EXYNOS_4210_URSTCON_PHY0;
break;
case EXYNOS4210_HOST:
phypwr = EXYNOS_4210_UPHYPWR_PHY1;
rstbits = EXYNOS_4210_URSTCON_PHY1_ALL |
EXYNOS_4210_URSTCON_PHY1_P0 |
EXYNOS_4210_URSTCON_PHY1_P1P2 |
EXYNOS_4210_URSTCON_HOST_LINK_ALL |
EXYNOS_4210_URSTCON_HOST_LINK_P0;
writel(on, drv->reg_phy + EXYNOS_4210_UPHY1CON);
break;
case EXYNOS4210_HSIC0:
phypwr = EXYNOS_4210_UPHYPWR_HSIC0;
rstbits = EXYNOS_4210_URSTCON_PHY1_P1P2 |
EXYNOS_4210_URSTCON_HOST_LINK_P1;
break;
case EXYNOS4210_HSIC1:
phypwr = EXYNOS_4210_UPHYPWR_HSIC1;
rstbits = EXYNOS_4210_URSTCON_PHY1_P1P2 |
EXYNOS_4210_URSTCON_HOST_LINK_P2;
break;
}
if (on) {
clk = readl(drv->reg_phy + EXYNOS_4210_UPHYCLK);
clk &= ~EXYNOS_4210_UPHYCLK_PHYFSEL_MASK;
clk |= drv->ref_reg_val << EXYNOS_4210_UPHYCLK_PHYFSEL_OFFSET;
writel(clk, drv->reg_phy + EXYNOS_4210_UPHYCLK);
pwr = readl(drv->reg_phy + EXYNOS_4210_UPHYPWR);
pwr &= ~phypwr;
writel(pwr, drv->reg_phy + EXYNOS_4210_UPHYPWR);
rst = readl(drv->reg_phy + EXYNOS_4210_UPHYRST);
rst |= rstbits;
writel(rst, drv->reg_phy + EXYNOS_4210_UPHYRST);
udelay(10);
rst &= ~rstbits;
writel(rst, drv->reg_phy + EXYNOS_4210_UPHYRST);
/* The following delay is necessary for the reset sequence to be
* completed */
udelay(80);
} else {
pwr = readl(drv->reg_phy + EXYNOS_4210_UPHYPWR);
pwr |= phypwr;
writel(pwr, drv->reg_phy + EXYNOS_4210_UPHYPWR);
}
}
static int exynos4210_power_on(struct samsung_usb2_phy_instance *inst)
{
/* Order of initialisation is important - first power then isolation */
exynos4210_phy_pwr(inst, 1);
exynos4210_isol(inst, 0);
return 0;
}
static int exynos4210_power_off(struct samsung_usb2_phy_instance *inst)
{
exynos4210_isol(inst, 1);
exynos4210_phy_pwr(inst, 0);
return 0;
}
static const struct samsung_usb2_common_phy exynos4210_phys[] = {
{
.label = "device",
.id = EXYNOS4210_DEVICE,
.power_on = exynos4210_power_on,
.power_off = exynos4210_power_off,
},
{
.label = "host",
.id = EXYNOS4210_HOST,
.power_on = exynos4210_power_on,
.power_off = exynos4210_power_off,
},
{
.label = "hsic0",
.id = EXYNOS4210_HSIC0,
.power_on = exynos4210_power_on,
.power_off = exynos4210_power_off,
},
{
.label = "hsic1",
.id = EXYNOS4210_HSIC1,
.power_on = exynos4210_power_on,
.power_off = exynos4210_power_off,
},
};
const struct samsung_usb2_phy_config exynos4210_usb2_phy_config = {
.has_mode_switch = 0,
.num_phys = EXYNOS4210_NUM_PHYS,
.phys = exynos4210_phys,
.rate_to_clk = exynos4210_rate_to_clk,
};
|
