1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
|
/*
* Helper functions for the SPI-3 bridge FPGA on the Radisys ENP2611
* Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
* Dedicated to Marija Kulikova.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <asm/io.h>
#include "caleb.h"
#define CALEB_IDLO 0x00
#define CALEB_IDHI 0x01
#define CALEB_RID 0x02
#define CALEB_RESET 0x03
#define CALEB_INTREN0 0x04
#define CALEB_INTREN1 0x05
#define CALEB_INTRSTAT0 0x06
#define CALEB_INTRSTAT1 0x07
#define CALEB_PORTEN 0x08
#define CALEB_BURST 0x09
#define CALEB_PORTPAUS 0x0A
#define CALEB_PORTPAUSD 0x0B
#define CALEB_PHY0RX 0x10
#define CALEB_PHY1RX 0x11
#define CALEB_PHY0TX 0x12
#define CALEB_PHY1TX 0x13
#define CALEB_IXPRX_HI_CNTR 0x15
#define CALEB_PHY0RX_HI_CNTR 0x16
#define CALEB_PHY1RX_HI_CNTR 0x17
#define CALEB_IXPRX_CNTR 0x18
#define CALEB_PHY0RX_CNTR 0x19
#define CALEB_PHY1RX_CNTR 0x1A
#define CALEB_IXPTX_CNTR 0x1B
#define CALEB_PHY0TX_CNTR 0x1C
#define CALEB_PHY1TX_CNTR 0x1D
#define CALEB_DEBUG0 0x1E
#define CALEB_DEBUG1 0x1F
static u8 caleb_reg_read(int reg)
{
u8 value;
value = *((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg));
// printk(KERN_INFO "caleb_reg_read(%d) = %.2x\n", reg, value);
return value;
}
static void caleb_reg_write(int reg, u8 value)
{
u8 dummy;
// printk(KERN_INFO "caleb_reg_write(%d, %.2x)\n", reg, value);
*((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg)) = value;
dummy = *((volatile u8 *)ENP2611_CALEB_VIRT_BASE);
__asm__ __volatile__("mov %0, %0" : "+r" (dummy));
}
void caleb_reset(void)
{
/*
* Perform a chip reset.
*/
caleb_reg_write(CALEB_RESET, 0x02);
udelay(1);
/*
* Enable all interrupt sources. This is needed to get
* meaningful results out of the status bits (register 6
* and 7.)
*/
caleb_reg_write(CALEB_INTREN0, 0xff);
caleb_reg_write(CALEB_INTREN1, 0x07);
/*
* Set RX and TX FIFO thresholds to 1.5kb.
*/
caleb_reg_write(CALEB_PHY0RX, 0x11);
caleb_reg_write(CALEB_PHY1RX, 0x11);
caleb_reg_write(CALEB_PHY0TX, 0x11);
caleb_reg_write(CALEB_PHY1TX, 0x11);
/*
* Program SPI-3 burst size.
*/
caleb_reg_write(CALEB_BURST, 0); // 64-byte RBUF mpackets
// caleb_reg_write(CALEB_BURST, 1); // 128-byte RBUF mpackets
// caleb_reg_write(CALEB_BURST, 2); // 256-byte RBUF mpackets
}
void caleb_enable_rx(int port)
{
u8 temp;
temp = caleb_reg_read(CALEB_PORTEN);
temp |= 1 << port;
caleb_reg_write(CALEB_PORTEN, temp);
}
void caleb_disable_rx(int port)
{
u8 temp;
temp = caleb_reg_read(CALEB_PORTEN);
temp &= ~(1 << port);
caleb_reg_write(CALEB_PORTEN, temp);
}
void caleb_enable_tx(int port)
{
u8 temp;
temp = caleb_reg_read(CALEB_PORTEN);
temp |= 1 << (port + 4);
caleb_reg_write(CALEB_PORTEN, temp);
}
void caleb_disable_tx(int port)
{
u8 temp;
temp = caleb_reg_read(CALEB_PORTEN);
temp &= ~(1 << (port + 4));
caleb_reg_write(CALEB_PORTEN, temp);
}
|
