1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
|
// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2018-2019 MediaTek Inc.
/* A library for MediaTek SGMII circuit
*
* Author: Sean Wang <sean.wang@mediatek.com>
*
*/
#include <linux/mfd/syscon.h>
#include <linux/of.h>
#include <linux/phylink.h>
#include <linux/regmap.h>
#include "mtk_eth_soc.h"
static struct mtk_pcs *pcs_to_mtk_pcs(struct phylink_pcs *pcs)
{
return container_of(pcs, struct mtk_pcs, pcs);
}
static void mtk_pcs_get_state(struct phylink_pcs *pcs,
struct phylink_link_state *state)
{
struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
unsigned int bm, adv;
/* Read the BMSR and LPA */
regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &bm);
regmap_read(mpcs->regmap, SGMSYS_PCS_ADVERTISE, &adv);
phylink_mii_c22_pcs_decode_state(state, FIELD_GET(SGMII_BMSR, bm),
FIELD_GET(SGMII_LPA, adv));
}
static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
phy_interface_t interface,
const unsigned long *advertising,
bool permit_pause_to_mac)
{
bool mode_changed = false, changed, use_an;
struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
unsigned int rgc3, sgm_mode, bmcr;
int advertise, link_timer;
advertise = phylink_mii_c22_pcs_encode_advertisement(interface,
advertising);
if (advertise < 0)
return advertise;
/* Clearing IF_MODE_BIT0 switches the PCS to BASE-X mode, and
* we assume that fixes it's speed at bitrate = line rate (in
* other words, 1000Mbps or 2500Mbps).
*/
if (interface == PHY_INTERFACE_MODE_SGMII) {
sgm_mode = SGMII_IF_MODE_SGMII;
if (phylink_autoneg_inband(mode)) {
sgm_mode |= SGMII_REMOTE_FAULT_DIS |
SGMII_SPEED_DUPLEX_AN;
use_an = true;
} else {
use_an = false;
}
} else if (phylink_autoneg_inband(mode)) {
/* 1000base-X or 2500base-X autoneg */
sgm_mode = SGMII_REMOTE_FAULT_DIS;
use_an = linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
advertising);
} else {
/* 1000base-X or 2500base-X without autoneg */
sgm_mode = 0;
use_an = false;
}
if (use_an) {
bmcr = SGMII_AN_ENABLE;
} else {
bmcr = 0;
}
if (mpcs->interface != interface) {
link_timer = phylink_get_link_timer_ns(interface);
if (link_timer < 0)
return link_timer;
/* PHYA power down */
regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
SGMII_PHYA_PWD, SGMII_PHYA_PWD);
/* Reset SGMII PCS state */
regmap_update_bits(mpcs->regmap, SGMII_RESERVED_0,
SGMII_SW_RESET, SGMII_SW_RESET);
if (interface == PHY_INTERFACE_MODE_2500BASEX)
rgc3 = RG_PHY_SPEED_3_125G;
else
rgc3 = 0;
/* Configure the underlying interface speed */
regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3,
RG_PHY_SPEED_3_125G, rgc3);
/* Setup the link timer */
regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER, link_timer / 2 / 8);
mpcs->interface = interface;
mode_changed = true;
}
/* Update the advertisement, noting whether it has changed */
regmap_update_bits_check(mpcs->regmap, SGMSYS_PCS_ADVERTISE,
SGMII_ADVERTISE, advertise, &changed);
/* Update the sgmsys mode register */
regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
SGMII_REMOTE_FAULT_DIS | SGMII_SPEED_DUPLEX_AN |
SGMII_IF_MODE_SGMII, sgm_mode);
/* Update the BMCR */
regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
SGMII_AN_ENABLE, bmcr);
/* Release PHYA power down state
* Only removing bit SGMII_PHYA_PWD isn't enough.
* There are cases when the SGMII_PHYA_PWD register contains 0x9 which
* prevents SGMII from working. The SGMII still shows link but no traffic
* can flow. Writing 0x0 to the PHYA_PWD register fix the issue. 0x0 was
* taken from a good working state of the SGMII interface.
* Unknown how much the QPHY needs but it is racy without a sleep.
* Tested on mt7622 & mt7986.
*/
usleep_range(50, 100);
regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, 0);
return changed || mode_changed;
}
static void mtk_pcs_restart_an(struct phylink_pcs *pcs)
{
struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
SGMII_AN_RESTART, SGMII_AN_RESTART);
}
static void mtk_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
phy_interface_t interface, int speed, int duplex)
{
struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
unsigned int sgm_mode;
if (!phylink_autoneg_inband(mode)) {
/* Force the speed and duplex setting */
if (speed == SPEED_10)
sgm_mode = SGMII_SPEED_10;
else if (speed == SPEED_100)
sgm_mode = SGMII_SPEED_100;
else
sgm_mode = SGMII_SPEED_1000;
if (duplex != DUPLEX_FULL)
sgm_mode |= SGMII_DUPLEX_HALF;
regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
SGMII_DUPLEX_HALF | SGMII_SPEED_MASK,
sgm_mode);
}
}
static const struct phylink_pcs_ops mtk_pcs_ops = {
.pcs_get_state = mtk_pcs_get_state,
.pcs_config = mtk_pcs_config,
.pcs_an_restart = mtk_pcs_restart_an,
.pcs_link_up = mtk_pcs_link_up,
};
int mtk_sgmii_init(struct mtk_sgmii *ss, struct device_node *r, u32 ana_rgc3)
{
struct device_node *np;
int i;
for (i = 0; i < MTK_MAX_DEVS; i++) {
np = of_parse_phandle(r, "mediatek,sgmiisys", i);
if (!np)
break;
ss->pcs[i].ana_rgc3 = ana_rgc3;
ss->pcs[i].regmap = syscon_node_to_regmap(np);
of_node_put(np);
if (IS_ERR(ss->pcs[i].regmap))
return PTR_ERR(ss->pcs[i].regmap);
ss->pcs[i].pcs.ops = &mtk_pcs_ops;
ss->pcs[i].pcs.poll = true;
ss->pcs[i].interface = PHY_INTERFACE_MODE_NA;
}
return 0;
}
struct phylink_pcs *mtk_sgmii_select_pcs(struct mtk_sgmii *ss, int id)
{
if (!ss->pcs[id].regmap)
return NULL;
return &ss->pcs[id].pcs;
}
|
