1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
|
/*
* ADIS16080/100 Yaw Rate Gyroscope with SPI driver
*
* Copyright 2010 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/module.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#define ADIS16080_DIN_GYRO (0 << 10) /* Gyroscope output */
#define ADIS16080_DIN_TEMP (1 << 10) /* Temperature output */
#define ADIS16080_DIN_AIN1 (2 << 10)
#define ADIS16080_DIN_AIN2 (3 << 10)
/*
* 1: Write contents on DIN to control register.
* 0: No changes to control register.
*/
#define ADIS16080_DIN_WRITE (1 << 15)
struct adis16080_chip_info {
int scale_val;
int scale_val2;
};
/**
* struct adis16080_state - device instance specific data
* @us: actual spi_device to write data
* @info: chip specific parameters
* @buf: transmit or receive buffer
**/
struct adis16080_state {
struct spi_device *us;
const struct adis16080_chip_info *info;
__be16 buf ____cacheline_aligned;
};
static int adis16080_read_sample(struct iio_dev *indio_dev,
u16 addr, int *val)
{
struct adis16080_state *st = iio_priv(indio_dev);
int ret;
struct spi_transfer t[] = {
{
.tx_buf = &st->buf,
.len = 2,
.cs_change = 1,
}, {
.rx_buf = &st->buf,
.len = 2,
},
};
st->buf = cpu_to_be16(addr | ADIS16080_DIN_WRITE);
ret = spi_sync_transfer(st->us, t, ARRAY_SIZE(t));
if (ret == 0)
*val = sign_extend32(be16_to_cpu(st->buf), 11);
return ret;
}
static int adis16080_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val,
int *val2,
long mask)
{
struct adis16080_state *st = iio_priv(indio_dev);
int ret;
switch (mask) {
case IIO_CHAN_INFO_RAW:
mutex_lock(&indio_dev->mlock);
ret = adis16080_read_sample(indio_dev, chan->address, val);
mutex_unlock(&indio_dev->mlock);
return ret ? ret : IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_ANGL_VEL:
*val = st->info->scale_val;
*val2 = st->info->scale_val2;
return IIO_VAL_FRACTIONAL;
case IIO_VOLTAGE:
/* VREF = 5V, 12 bits */
*val = 5000;
*val2 = 12;
return IIO_VAL_FRACTIONAL_LOG2;
case IIO_TEMP:
/* 85 C = 585, 25 C = 0 */
*val = 85000 - 25000;
*val2 = 585;
return IIO_VAL_FRACTIONAL;
default:
return -EINVAL;
}
case IIO_CHAN_INFO_OFFSET:
switch (chan->type) {
case IIO_VOLTAGE:
/* 2.5 V = 0 */
*val = 2048;
return IIO_VAL_INT;
case IIO_TEMP:
/* 85 C = 585, 25 C = 0 */
*val = DIV_ROUND_CLOSEST(25 * 585, 85 - 25);
return IIO_VAL_INT;
default:
return -EINVAL;
}
default:
break;
}
return -EINVAL;
}
static const struct iio_chan_spec adis16080_channels[] = {
{
.type = IIO_ANGL_VEL,
.modified = 1,
.channel2 = IIO_MOD_Z,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SCALE),
.address = ADIS16080_DIN_GYRO,
}, {
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 0,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_OFFSET),
.address = ADIS16080_DIN_AIN1,
}, {
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 1,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_OFFSET),
.address = ADIS16080_DIN_AIN2,
}, {
.type = IIO_TEMP,
.indexed = 1,
.channel = 0,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_OFFSET),
.address = ADIS16080_DIN_TEMP,
}
};
static const struct iio_info adis16080_info = {
.read_raw = &adis16080_read_raw,
};
enum {
ID_ADIS16080,
ID_ADIS16100,
};
static const struct adis16080_chip_info adis16080_chip_info[] = {
[ID_ADIS16080] = {
/* 80 degree = 819, 819 rad = 46925 degree */
.scale_val = 80,
.scale_val2 = 46925,
},
[ID_ADIS16100] = {
/* 300 degree = 1230, 1230 rad = 70474 degree */
.scale_val = 300,
.scale_val2 = 70474,
},
};
static int adis16080_probe(struct spi_device *spi)
{
const struct spi_device_id *id = spi_get_device_id(spi);
struct adis16080_state *st;
struct iio_dev *indio_dev;
/* setup the industrialio driver allocated elements */
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
st = iio_priv(indio_dev);
/* this is only used for removal purposes */
spi_set_drvdata(spi, indio_dev);
/* Allocate the comms buffers */
st->us = spi;
st->info = &adis16080_chip_info[id->driver_data];
indio_dev->name = spi->dev.driver->name;
indio_dev->channels = adis16080_channels;
indio_dev->num_channels = ARRAY_SIZE(adis16080_channels);
indio_dev->dev.parent = &spi->dev;
indio_dev->info = &adis16080_info;
indio_dev->modes = INDIO_DIRECT_MODE;
return iio_device_register(indio_dev);
}
static int adis16080_remove(struct spi_device *spi)
{
iio_device_unregister(spi_get_drvdata(spi));
return 0;
}
static const struct spi_device_id adis16080_ids[] = {
{ "adis16080", ID_ADIS16080 },
{ "adis16100", ID_ADIS16100 },
{},
};
MODULE_DEVICE_TABLE(spi, adis16080_ids);
static struct spi_driver adis16080_driver = {
.driver = {
.name = "adis16080",
},
.probe = adis16080_probe,
.remove = adis16080_remove,
.id_table = adis16080_ids,
};
module_spi_driver(adis16080_driver);
MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
MODULE_DESCRIPTION("Analog Devices ADIS16080/100 Yaw Rate Gyroscope Driver");
MODULE_LICENSE("GPL v2");
|
