1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
|
// SPDX-License-Identifier: (GPL-2.0+ or MIT)
// Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org>
/*
* gpio line names
*
* The Nezha-D1 has a 40-pin IO header. Some of these pins are routed
* directly to pads on the SoC, others come from an 8-bit pcf857x IO
* expander. Therefore, these line names are specified in two places:
* one set for the pcf857x, and one set for the pio controller.
*
* Lines which are routed to the 40-pin header are named as follows:
* <pin#> [<pin name>]
* where:
* <pin#> is the actual pin number of the 40-pin header
* <pin name> is the name of the pin by function/gpio#
*
* For details regarding pin numbers and names see the schematics (under
* "IO EXPAND"):
* http://dl.linux-sunxi.org/D1/D1_Nezha_development_board_schematic_diagram_20210224.pdf
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/dts-v1/;
#include "sun20i-d1.dtsi"
#include "sun20i-common-regulators.dtsi"
/ {
model = "Allwinner D1 Nezha";
compatible = "allwinner,d1-nezha", "allwinner,sun20i-d1";
aliases {
ethernet0 = &emac;
ethernet1 = &xr829;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
reg_usbvbus: usbvbus {
compatible = "regulator-fixed";
regulator-name = "usbvbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
enable-active-high;
vin-supply = <®_vcc>;
};
/*
* This regulator is PWM-controlled, but the PWM controller is not
* yet supported, so fix the regulator to its default voltage.
*/
reg_vdd_cpu: vdd-cpu {
compatible = "regulator-fixed";
regulator-name = "vdd-cpu";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
vin-supply = <®_vcc>;
};
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
};
};
&cpu0 {
cpu-supply = <®_vdd_cpu>;
};
&dcxo {
clock-frequency = <24000000>;
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
&emac {
pinctrl-0 = <&rgmii_pe_pins>;
pinctrl-names = "default";
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii-id";
phy-supply = <®_vcc_3v3>;
status = "okay";
};
&i2c2 {
pinctrl-0 = <&i2c2_pb0_pins>;
pinctrl-names = "default";
status = "okay";
pcf8574a: gpio@38 {
compatible = "nxp,pcf8574a";
reg = <0x38>;
interrupt-parent = <&pio>;
interrupts = <1 2 IRQ_TYPE_LEVEL_LOW>; /* PB2 */
interrupt-controller;
gpio-controller;
#gpio-cells = <2>;
#interrupt-cells = <2>;
gpio-line-names =
"pin13 [gpio8]",
"pin16 [gpio10]",
"pin18 [gpio11]",
"pin26 [gpio17]",
"pin22 [gpio14]",
"pin28 [gpio19]",
"pin37 [gpio23]",
"pin11 [gpio6]";
};
};
&mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
&mmc0 {
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
disable-wp;
vmmc-supply = <®_vcc_3v3>;
vqmmc-supply = <®_vcc_3v3>;
pinctrl-0 = <&mmc0_pins>;
pinctrl-names = "default";
status = "okay";
};
&mmc1 {
bus-width = <4>;
mmc-pwrseq = <&wifi_pwrseq>;
non-removable;
vmmc-supply = <®_vcc_3v3>;
vqmmc-supply = <®_vcc_3v3>;
pinctrl-0 = <&mmc1_pins>;
pinctrl-names = "default";
status = "okay";
xr829: wifi@1 {
reg = <1>;
interrupt-parent = <&pio>;
interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 */
interrupt-names = "host-wake";
};
};
&ohci0 {
status = "okay";
};
&ohci1 {
status = "okay";
};
&uart0 {
pinctrl-0 = <&uart0_pb8_pins>;
pinctrl-names = "default";
status = "okay";
};
&uart1 {
uart-has-rtscts;
pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
pinctrl-names = "default";
status = "okay";
/* XR829 bluetooth is connected here */
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy {
usb0_id_det-gpios = <&pio 3 21 GPIO_ACTIVE_HIGH>; /* PD21 */
usb0_vbus_det-gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
usb0_vbus-supply = <®_usbvbus>;
usb1_vbus-supply = <®_vcc>;
status = "okay";
};
&pio {
gpio-line-names =
/* Port A */
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
/* Port B */
"pin5 [gpio2/twi2-sck]",
"pin3 [gpio1/twi2-sda]",
"",
"pin38 [gpio24/i2s2-din]",
"pin40 [gpio25/i2s2-dout]",
"pin12 [gpio7/i2s-clk]",
"pin35 [gpio22/i2s2-lrck]",
"",
"pin8 [gpio4/uart0-txd]",
"pin10 [gpio5/uart0-rxd]",
"",
"",
"pin15 [gpio9]",
"", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
/* Port C */
"",
"pin31 [gpio21]",
"", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
/* Port D */
"", "", "", "", "", "", "", "",
"", "",
"pin24 [gpio16/spi1-ce0]",
"pin23 [gpio15/spi1-clk]",
"pin19 [gpio12/spi1-mosi]",
"pin21 [gpio13/spi1-miso]",
"pin27 [gpio18/spi1-hold]",
"pin29 [gpio20/spi1-wp]",
"", "", "", "", "", "",
"pin7 [gpio3/pwm]";
};
|
