1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (c) 2020 NXP
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/fsl,imx8mp-dwc3.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NXP iMX8MP Soc USB Controller
maintainers:
- Li Jun <jun.li@nxp.com>
properties:
compatible:
oneOf:
- items:
- const: fsl,imx95-dwc3
- const: fsl,imx8mp-dwc3
- const: fsl,imx8mp-dwc3
reg:
items:
- description: Address and length of the register set for HSIO Block Control
- description: Address and length of the register set for the wrapper of dwc3 core on the SOC.
"#address-cells":
enum: [ 1, 2 ]
"#size-cells":
enum: [ 1, 2 ]
dma-ranges:
description:
See section 2.3.9 of the DeviceTree Specification.
ranges: true
interrupts:
maxItems: 1
description: The interrupt that is asserted when a wakeup event is
received.
clocks:
description:
A list of phandle and clock-specifier pairs for the clocks
listed in clock-names.
items:
- description: system hsio root clock.
- description: suspend clock, used for usb wakeup logic.
clock-names:
items:
- const: hsio
- const: suspend
fsl,permanently-attached:
type: boolean
description:
Indicates if the device attached to a downstream port is
permanently attached.
fsl,disable-port-power-control:
type: boolean
description:
Indicates whether the host controller implementation includes port
power control. Defines Bit 3 in capability register (HCCPARAMS).
fsl,over-current-active-low:
type: boolean
description:
Over current signal polarity is active low.
fsl,power-active-low:
type: boolean
description:
Power pad (PWR) polarity is active low.
power-domains:
maxItems: 1
# Required child node:
patternProperties:
"^usb@[0-9a-f]+$":
$ref: snps,dwc3.yaml#
required:
- compatible
- reg
- "#address-cells"
- "#size-cells"
- dma-ranges
- ranges
- clocks
- clock-names
- interrupts
- power-domains
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/imx8mp-clock.h>
#include <dt-bindings/power/imx8mp-power.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
usb3_0: usb@32f10100 {
compatible = "fsl,imx8mp-dwc3";
reg = <0x32f10100 0x8>,
<0x381f0000 0x20>;
clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
<&clk IMX8MP_CLK_USB_ROOT>;
clock-names = "hsio", "suspend";
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
#address-cells = <1>;
#size-cells = <1>;
dma-ranges = <0x40000000 0x40000000 0xc0000000>;
ranges;
usb@38100000 {
compatible = "snps,dwc3";
reg = <0x38100000 0x10000>;
clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
<&clk IMX8MP_CLK_USB_CORE_REF>,
<&clk IMX8MP_CLK_USB_ROOT>;
clock-names = "bus_early", "ref", "suspend";
assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
assigned-clock-rates = <500000000>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb3_phy0>, <&usb3_phy0>;
phy-names = "usb2-phy", "usb3-phy";
snps,dis-u2-freeclk-exists-quirk;
};
};
|
