1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
|
* Allwinner sun8i GMAC ethernet controller
This device is a platform glue layer for stmmac.
Please see stmmac.txt for the other unchanged properties.
Required properties:
- compatible: must be one of the following string:
"allwinner,sun8i-a83t-emac"
"allwinner,sun8i-h3-emac"
"allwinner,sun8i-r40-gmac"
"allwinner,sun8i-v3s-emac"
"allwinner,sun50i-a64-emac"
- reg: address and length of the register for the device.
- interrupts: interrupt for the device
- interrupt-names: must be "macirq"
- clocks: A phandle to the reference clock for this device
- clock-names: must be "stmmaceth"
- resets: A phandle to the reset control for this device
- reset-names: must be "stmmaceth"
- phy-mode: See ethernet.txt
- phy-handle: See ethernet.txt
- #address-cells: shall be 1
- #size-cells: shall be 0
- syscon: A phandle to the device containing the EMAC or GMAC clock register
Optional properties:
- allwinner,tx-delay-ps: TX clock delay chain value in ps.
Range is 0-700. Default is 0.
Unavailable for allwinner,sun8i-r40-gmac
- allwinner,rx-delay-ps: RX clock delay chain value in ps.
Range is 0-3100. Default is 0.
Range is 0-700 for allwinner,sun8i-r40-gmac
Both delay properties need to be a multiple of 100. They control the
clock delay for external RGMII PHY. They do not apply to the internal
PHY or external non-RGMII PHYs.
Optional properties for the following compatibles:
- "allwinner,sun8i-h3-emac",
- "allwinner,sun8i-v3s-emac":
- allwinner,leds-active-low: EPHY LEDs are active low
Required child node of emac:
- mdio bus node: should be named mdio with compatible "snps,dwmac-mdio"
Required properties of the mdio node:
- #address-cells: shall be 1
- #size-cells: shall be 0
The device node referenced by "phy" or "phy-handle" must be a child node
of the mdio node. See phy.txt for the generic PHY bindings.
The following compatibles require that the emac node have a mdio-mux child
node called "mdio-mux":
- "allwinner,sun8i-h3-emac"
- "allwinner,sun8i-v3s-emac":
Required properties for the mdio-mux node:
- compatible = "allwinner,sun8i-h3-mdio-mux"
- mdio-parent-bus: a phandle to EMAC mdio
- one child mdio for the integrated mdio with the compatible
"allwinner,sun8i-h3-mdio-internal"
- one child mdio for the external mdio if present (V3s have none)
Required properties for the mdio-mux children node:
- reg: 1 for internal MDIO bus, 2 for external MDIO bus
The following compatibles require a PHY node representing the integrated
PHY, under the integrated MDIO bus node if an mdio-mux node is used:
- "allwinner,sun8i-h3-emac",
- "allwinner,sun8i-v3s-emac":
Additional information regarding generic multiplexer properties can be found
at Documentation/devicetree/bindings/net/mdio-mux.txt
Required properties of the integrated phy node:
- clocks: a phandle to the reference clock for the EPHY
- resets: a phandle to the reset control for the EPHY
- Must be a child of the integrated mdio
Example with integrated PHY:
emac: ethernet@1c0b000 {
compatible = "allwinner,sun8i-h3-emac";
syscon = <&syscon>;
reg = <0x01c0b000 0x104>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
resets = <&ccu RST_BUS_EMAC>;
reset-names = "stmmaceth";
clocks = <&ccu CLK_BUS_EMAC>;
clock-names = "stmmaceth";
#address-cells = <1>;
#size-cells = <0>;
phy-handle = <&int_mii_phy>;
phy-mode = "mii";
allwinner,leds-active-low;
mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
};
mdio-mux {
compatible = "mdio-mux", "allwinner,sun8i-h3-mdio-mux";
#address-cells = <1>;
#size-cells = <0>;
mdio-parent-bus = <&mdio>;
int_mdio: mdio@1 {
compatible = "allwinner,sun8i-h3-mdio-internal";
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
int_mii_phy: ethernet-phy@1 {
reg = <1>;
clocks = <&ccu CLK_BUS_EPHY>;
resets = <&ccu RST_BUS_EPHY>;
phy-is-integrated;
};
};
ext_mdio: mdio@2 {
reg = <2>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};
Example with external PHY:
emac: ethernet@1c0b000 {
compatible = "allwinner,sun8i-h3-emac";
syscon = <&syscon>;
reg = <0x01c0b000 0x104>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
resets = <&ccu RST_BUS_EMAC>;
reset-names = "stmmaceth";
clocks = <&ccu CLK_BUS_EMAC>;
clock-names = "stmmaceth";
#address-cells = <1>;
#size-cells = <0>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
allwinner,leds-active-low;
mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
};
mdio-mux {
compatible = "allwinner,sun8i-h3-mdio-mux";
#address-cells = <1>;
#size-cells = <0>;
mdio-parent-bus = <&mdio>;
int_mdio: mdio@1 {
compatible = "allwinner,sun8i-h3-mdio-internal";
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
int_mii_phy: ethernet-phy@1 {
reg = <1>;
clocks = <&ccu CLK_BUS_EPHY>;
resets = <&ccu RST_BUS_EPHY>;
};
};
ext_mdio: mdio@2 {
reg = <2>;
#address-cells = <1>;
#size-cells = <0>;
ext_rgmii_phy: ethernet-phy@1 {
reg = <1>;
};
}:
};
};
Example with SoC without integrated PHY
emac: ethernet@1c0b000 {
compatible = "allwinner,sun8i-a83t-emac";
syscon = <&syscon>;
reg = <0x01c0b000 0x104>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
resets = <&ccu RST_BUS_EMAC>;
reset-names = "stmmaceth";
clocks = <&ccu CLK_BUS_EMAC>;
clock-names = "stmmaceth";
#address-cells = <1>;
#size-cells = <0>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
mdio: mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
ext_rgmii_phy: ethernet-phy@1 {
reg = <1>;
};
};
};
|
