1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/hwmon/adi,max31827.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch
maintainers:
- Daniel Matyas <daniel.matyas@analog.com>
description: |
Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch with
I2C Interface
https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31827-MAX31829.pdf
properties:
compatible:
oneOf:
- const: adi,max31827
- items:
- enum:
- adi,max31828
- adi,max31829
- const: adi,max31827
reg:
maxItems: 1
vref-supply:
description:
Must have values in the interval (1.6V; 3.6V) in order for the device to
function correctly.
adi,comp-int:
description:
If present interrupt mode is used. If not present comparator mode is used
(default).
type: boolean
adi,alarm-pol:
description:
Sets the alarms active state.
- 0 = active low
- 1 = active high
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
adi,fault-q:
description:
Select how many consecutive temperature faults must occur before
overtemperature or undertemperature faults are indicated in the
corresponding status bits.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 2, 4, 8]
adi,timeout-enable:
description:
Enables timeout. Bus timeout resets the I2C-compatible interface when SCL
is low for more than 30ms (nominal).
type: boolean
allOf:
- if:
properties:
compatible:
contains:
const: adi,max31829
then:
properties:
adi,alarm-pol:
default: 1
else:
properties:
adi,alarm-pol:
default: 0
- if:
properties:
compatible:
contains:
const: adi,max31827
then:
properties:
adi,fault-q:
default: 1
else:
properties:
adi,fault-q:
default: 4
required:
- compatible
- reg
- vref-supply
additionalProperties: false
examples:
- |
i2c {
#address-cells = <1>;
#size-cells = <0>;
temperature-sensor@42 {
compatible = "adi,max31827";
reg = <0x42>;
vref-supply = <®_vdd>;
adi,comp-int;
adi,alarm-pol = <0>;
adi,fault-q = <1>;
adi,timeout-enable;
};
};
...
|
