blob: 38770c4c85fd5defe674fca48d81e638eb2f1f97 (
plain) (
blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/ata/ahci-common.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Common Properties for Serial ATA AHCI controllers
maintainers:
- Hans de Goede <hdegoede@redhat.com>
- Damien Le Moal <dlemoal@kernel.org>
description:
This document defines device tree properties for a common AHCI SATA
controller implementation. It's hardware interface is supposed to
conform to the technical standard defined by Intel (see Serial ATA
Advanced Host Controller Interface specification for details). The
document doesn't constitute a DT-node binding by itself but merely
defines a set of common properties for the AHCI-compatible devices.
select: false
allOf:
- $ref: sata-common.yaml#
properties:
reg:
description:
Generic AHCI registers space conforming to the Serial ATA AHCI
specification.
reg-names:
description: CSR space IDs
contains:
const: ahci
interrupts:
description:
Generic AHCI state change interrupt. Can be implemented either as a
single line attached to the controller or as a set of the signals
indicating the particular port events.
minItems: 1
maxItems: 32
ahci-supply:
description: Power regulator for AHCI controller
target-supply:
description: Power regulator for SATA target device
phy-supply:
description: Power regulator for SATA PHY
phys:
description: Reference to the SATA PHY node
maxItems: 1
phy-names:
const: sata-phy
hba-cap:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Bitfield of the HBA generic platform capabilities like Staggered
Spin-up or Mechanical Presence Switch support. It can be used to
appropriately initialize the HWinit fields of the HBA CAP register
in case if the system firmware hasn't done it.
ports-implemented:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Mask that indicates which ports the HBA supports. Useful if PI is not
programmed by the BIOS, which is true for some embedded SoC's.
patternProperties:
"^sata-port@[0-9a-f]+$":
$ref: '#/$defs/ahci-port'
description:
It is optionally possible to describe the ports as sub-nodes so
to enable each port independently when dealing with multiple PHYs.
required:
- reg
- interrupts
additionalProperties: true
$defs:
ahci-port:
$ref: /schemas/ata/sata-common.yaml#/$defs/sata-port
properties:
reg:
description:
AHCI SATA port identifier. By design AHCI controller can't have
more than 32 ports due to the CAP.NP fields and PI register size
constraints.
minimum: 0
maximum: 31
phys:
description: Individual AHCI SATA port PHY
maxItems: 1
phy-names:
description: AHCI SATA port PHY ID
const: sata-phy
target-supply:
description: Power regulator for SATA port target device
hba-port-cap:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Bitfield of the HBA port-specific platform capabilities like Hot
plugging, eSATA, FIS-based Switching, etc (see AHCI specification
for details). It can be used to initialize the HWinit fields of
the PxCMD register in case if the system firmware hasn't done it.
required:
- reg
...
|
