/* * * Generic Bluetooth USB driver * * Copyright (C) 2005-2008 Marcel Holtmann * * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * */ #include #include #include #include #include #define VERSION "0.7" static bool disable_scofix; static bool force_scofix; static bool reset = 1; static struct usb_driver btusb_driver; #define BTUSB_IGNORE 0x01 #define BTUSB_DIGIANSWER 0x02 #define BTUSB_CSR 0x04 #define BTUSB_SNIFFER 0x08 #define BTUSB_BCM92035 0x10 #define BTUSB_BROKEN_ISOC 0x20 #define BTUSB_WRONG_SCO_MTU 0x40 #define BTUSB_ATH3012 0x80 #define BTUSB_INTEL 0x100 #define BTUSB_INTEL_BOOT 0x200 #define BTUSB_BCM_PATCHRAM 0x400 #define BTUSB_MARVELL 0x800 #define BTUSB_SWAVE 0x1000 #define BTUSB_INTEL_NEW 0x2000 #define BTUSB_AMP 0x4000 #define BTUSB_QCA_ROME 0x8000 static const struct usb_device_id btusb_table[] = { /* Generic Bluetooth USB device */ { USB_DEVICE_INFO(0xe0, 0x01, 0x01) }, /* Generic Bluetooth AMP device */ { USB_DEVICE_INFO(0xe0, 0x01, 0x04), .driver_info = BTUSB_AMP }, /* Apple-specific (Broadcom) devices */ { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01) }, /* MediaTek MT76x0E */ { USB_DEVICE(0x0e8d, 0x763f) }, /* Broadcom SoftSailing reporting vendor specific */ { USB_DEVICE(0x0a5c, 0x21e1) }, /* Apple MacBookPro 7,1 */ { USB_DEVICE(0x05ac, 0x8213) }, /* Apple iMac11,1 */ { USB_DEVICE(0x05ac, 0x8215) }, /* Apple MacBookPro6,2 */ { USB_DEVICE(0x05ac, 0x8218) }, /* Apple MacBookAir3,1, MacBookAir3,2 */ { USB_DEVICE(0x05ac, 0x821b) }, /* Apple MacBookAir4,1 */ { USB_DEVICE(0x05ac, 0x821f) }, /* Apple MacBookPro8,2 */ { USB_DEVICE(0x05ac, 0x821a) }, /* Apple MacMini5,1 */ { USB_DEVICE(0x05ac, 0x8281) }, /* AVM BlueFRITZ! USB v2.0 */ { USB_DEVICE(0x057c, 0x3800), .driver_info = BTUSB_SWAVE }, /* Bluetooth Ultraport Module from IBM */ { USB_DEVICE(0x04bf, 0x030a) }, /* ALPS Modules with non-standard id */ { USB_DEVICE(0x044e, 0x3001) }, { USB_DEVICE(0x044e, 0x3002) }, /* Ericsson with non-standard id */ { USB_DEVICE(0x0bdb, 0x1002) }, /* Canyon CN-BTU1 with HID interfaces */ { USB_DEVICE(0x0c10, 0x0000) }, /* Broadcom BCM20702A0 */ { USB_DEVICE(0x0489, 0xe042) }, { USB_DEVICE(0x04ca, 0x2003) }, { USB_DEVICE(0x0b05, 0x17b5) }, { USB_DEVICE(0x0b05, 0x17cb) }, { USB_DEVICE(0x413c, 0x8197) }, { USB_DEVICE(0x13d3, 0x3404), .driver_info = BTUSB_BCM_PATCHRAM }, /* Broadcom BCM20702B0 (Dynex/Insignia) */ { USB_DEVICE(0x19ff, 0x0239), .driver_info = BTUSB_BCM_PATCHRAM }, /* Foxconn - Hon Hai */ { USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01), .driver_info = BTUSB_BCM_PATCHRAM }, /* Lite-On Technology - Broadcom based */ { USB_VENDOR_AND_INTERFACE_INFO(0x04ca, 0xff, 0x01, 0x01), .driver_info = BTUSB_BCM_PATCHRAM }, /* Broadcom devices with vendor specific id */ { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01), .driver_info = BTUSB_BCM_PATCHRAM }, /* ASUSTek Computer - Broadcom based */ { USB_VENDOR_AND_INTERFACE_INFO(0x0b05, 0xff, 0x01, 0x01), .driver_info = BTUSB_BCM_PATCHRAM }, /* Belkin F8065bf - Broadcom based */ { USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01) }, /* IMC Networks - Broadcom based */ { USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01) }, /* Intel Bluetooth USB Bootloader (RAM module) */ { USB_DEVICE(0x8087, 0x0a5a), .driver_info = BTUSB_INTEL_BOOT | BTUSB_BROKEN_ISOC }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, btusb_table); static const struct usb_device_id blacklist_table[] = { /* CSR BlueCore devices */ { USB_DEVICE(0x0a12, 0x0001), .driver_info = BTUSB_CSR }, /* Broadcom BCM2033 without firmware */ { USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE }, /* Atheros 3011 with sflash firmware */ { USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x04f2, 0xaff1), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE }, /* Atheros AR9285 Malbec with sflash firmware */ { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE }, /* Atheros 3012 with sflash firmware */ { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x311f), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 }, /* QCA ROME chipset */ { USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME }, { USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME }, /* Broadcom BCM2035 */ { USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 }, { USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU }, { USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU }, /* Broadcom BCM2045 */ { USB_DEVICE(0x0a5c, 0x2039), .driver_info = BTUSB_WRONG_SCO_MTU }, { USB_DEVICE(0x0a5c, 0x2101), .driver_info = BTUSB_WRONG_SCO_MTU }, /* IBM/Lenovo ThinkPad with Broadcom chip */ { USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_WRONG_SCO_MTU }, { USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_WRONG_SCO_MTU }, /* HP laptop with Broadcom chip */ { USB_DEVICE(0x03f0, 0x171d), .driver_info = BTUSB_WRONG_SCO_MTU }, /* Dell laptop with Broadcom chip */ { USB_DEVICE(0x413c, 0x8126), .driver_info = BTUSB_WRONG_SCO_MTU }, /* Dell Wireless 370 and 410 devices */ { USB_DEVICE(0x413c, 0x8152), .driver_info = BTUSB_WRONG_SCO_MTU }, { USB_DEVICE(0x413c, 0x8156), .driver_info = BTUSB_WRONG_SCO_MTU }, /* Belkin F8T012 and F8T013 devices */ { USB_DEVICE(0x050d, 0x0012), .driver_info = BTUSB_WRONG_SCO_MTU }, { USB_DEVICE(0x050d, 0x0013), .driver_info = BTUSB_WRONG_SCO_MTU }, /* Asus WL-BTD202 device */ { USB_DEVICE(0x0b05, 0x1715), .driver_info = BTUSB_WRONG_SCO_MTU }, /* Kensington Bluetooth USB adapter */ { USB_DEVICE(0x047d, 0x105e), .driver_info = BTUSB_WRONG_SCO_MTU }, /* RTX Telecom based adapters with buggy SCO support */ { USB_DEVICE(0x0400, 0x0807), .driver_info = BTUSB_BROKEN_ISOC }, { USB_DEVICE(0x0400, 0x080a), .driver_info = BTUSB_BROKEN_ISOC }, /* CONWISE Technology based adapters with buggy SCO support */ { USB_DEVICE(0x0e5e, 0x6622), .driver_info = BTUSB_BROKEN_ISOC }, /* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */ { USB_DEVICE(0x1300, 0x0001), .driver_info = BTUSB_SWAVE }, /* Digianswer devices */ { USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER }, { USB_DEVICE(0x08fd, 0x0002), .driver_info = BTUSB_IGNORE }, /* CSR BlueCore Bluetooth Sniffer */ { USB_DEVICE(0x0a12, 0x0002), .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC }, /* Frontline ComProbe Bluetooth Sniffer */ { USB_DEVICE(0x16d3, 0x0002), .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC }, /* Marvell Bluetooth devices */ { USB_DEVICE(0x1286, 0x2044), .driver_info = BTUSB_MARVELL }, { USB_DEVICE(0x1286, 0x2046), .driver_info = BTUSB_MARVELL }, /* Intel Bluetooth devices */ { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR }, { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL }, { USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL }, { USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_NEW }, /* Other Intel Bluetooth devices */ { USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01), .driver_info = BTUSB_IGNORE }, { } /* Terminating entry */ }; #define BTUSB_MAX_ISOC_FRAMES 10 #define BTUSB_INTR_RUNNING 0 #define BTUSB_BULK_RUNNING 1 #define BTUSB_ISOC_RUNNING 2 #define BTUSB_SUSPENDING 3 #define BTUSB_DID_ISO_RESUME 4 #define BTUSB_BOOTLOADER 5 #define BTUSB_DOWNLOADING 6 #define BTUSB_FIRMWARE_LOADED 7 #define BTUSB_FIRMWARE_FAILED 8 #define BTUSB_BOOTING 9 struct btusb_data { struct hci_dev *hdev; struct usb_device *udev; struct usb_interface *intf; struct usb_interface *isoc; unsigned long flags; struct work_struct work; struct work_struct waker; struct usb_anchor deferred; struct usb_anchor tx_anchor; int tx_in_flight; spinlock_t txlock; struct usb_anchor intr_anchor; struct usb_anchor bulk_anchor; struct usb_anchor isoc_anchor; spinlock_t rxlock; struct sk_buff *evt_skb; struct sk_buff *acl_skb; struct sk_buff *sco_skb; struct usb_endpoint_descriptor *intr_ep; struct usb_endpoint_descriptor *bulk_tx_ep; struct usb_endpoint_descriptor *bulk_rx_ep; struct usb_endpoint_descriptor *isoc_tx_ep; struct usb_endpoint_descriptor *isoc_rx_ep; __u8 cmdreq_type; __u8 cmdreq; unsigned int sco_num; int isoc_altsetting; int suspend_count; int (*recv_event)(struct hci_dev *hdev, struct sk_buff *skb); int (*recv_bulk)(struct btusb_data *data, void *buffer, int count); int (*setup_on_usb)(struct hci_dev *hdev); }; static inline void btusb_free_frags(struct btusb_data *data) { unsigned long flags; spin_lock_irqsave(&data->rxlock, flags); kfree_skb(data->evt_skb); data->evt_skb = NULL; kfree_skb(data->acl_skb); data->acl_skb = NULL; kfree_skb(data->sco_skb); data->sco_skb = NULL; spin_unlock_irqrestore(&data->rxlock, flags); } static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count) { struct sk_buff *skb; int err = 0; spin_lock(&data->rxlock); skb = data->evt_skb; while (count) { int len; if (!skb) { skb = bt_skb_alloc(HCI_MAX_EVENT_SIZE, GFP_ATOMIC); if (!skb) { err = -ENOMEM; break; } bt_cb(skb)->pkt_type = HCI_EVENT_PKT; bt_cb(skb)->expect = HCI_EVENT_HDR_SIZE; } len = min_t(uint, bt_cb(skb)->expect, count); memcpy(skb_put(skb, len), buffer, len); count -= len; buffer += len; bt_cb(skb)->expect -= len; if (skb->len == HCI_EVENT_HDR_SIZE) { /* Complete event header */ bt_cb(skb)->expect = hci_event_hdr(skb)->plen; if (skb_tailroom(skb) < bt_cb(skb)->expect) { kfree_skb(skb); skb = NULL; err = -EILSEQ; break; } } if (bt_cb(skb)->expect == 0) { /* Complete frame */ data->recv_event(data->hdev, skb); skb = NULL; } } data->evt_skb = skb; spin_unlock(&data->rxlock); return err; } static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count) { struct sk_buff *skb; int err = 0; spin_lock(&data->rxlock); skb = data->acl_skb; while (count) { int len; if (!skb) { skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC); if (!skb) { err = -ENOMEM; break; } bt_cb(skb)->pkt_type = HCI_ACLDATA_PKT; bt_cb(skb)->expect = HCI_ACL_HDR_SIZE; } len = min_t(uint, bt_cb(skb)->expect, count); memcpy(skb_put(skb, len), buffer, len); count -= len; buffer += len; bt_cb(skb)->expect -= len; if (skb->len == HCI_ACL_HDR_SIZE) { __le16 dlen = hci_acl_hdr(skb)->dlen; /* Complete ACL header */ bt_cb(skb)->expect = __le16_to_cpu(dlen); if (skb_tailroom(skb) < bt_cb(skb)->expect) { kfree_skb(skb); skb = NULL; err = -EILSEQ; break; } } if (bt_cb(skb)->expect == 0) { /* Complete frame */ hci_recv_frame(data->hdev, skb); skb = NULL; } } data->acl_skb = skb; spin_unlock(&data->rxlock); return err; } static int btusb_recv_isoc(struct btusb_data *data, void *buffer, int count) { struct sk_buff *skb; int err = 0; spin_lock(&data->rxlock); skb = data->sco_skb; while (count) { int len; if (!skb) { skb = bt_skb_alloc(HCI_MAX_SCO_SIZE, GFP_ATOMIC); if (!skb) { err = -ENOMEM; break; } bt_cb(skb)->pkt_type = HCI_SCODATA_PKT; bt_cb(skb)->expect = HCI_SCO_HDR_SIZE; } len = min_t(uint, bt_cb(skb)->expect, count); memcpy(skb_put(skb, len), buffer, len); count -= len; buffer += len; bt_cb(skb)->expect -= len; if (skb->len == HCI_SCO_HDR_SIZE) { /* Complete SCO header */ bt_cb(skb)->expect = hci_sco_hdr(skb)->dlen; if (skb_tailroom(skb) < bt_cb(skb)->expect) { kfree_skb(skb); skb = NULL; err = -EILSEQ; break; } } if (bt_cb(skb)->expect == 0) { /* Complete frame */ hci_recv_frame(data->hdev, skb); skb = NULL; } } data->sco_skb = skb; spin_unlock(&data->rxlock); return err; } static void btusb_intr_complete(struct urb *urb) { struct hci_dev *hdev = urb->context; struct btusb_data *data = hci_get_drvdata(hdev); int err; BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status, urb->actual_length); if (!test_bit(HCI_RUNNING, &hdev->flags)) return; if (urb->status == 0) { hdev->stat.byte_rx += urb->actual_length; if (btusb_recv_intr(data, urb->transfer_buffer, urb->actual_length) < 0) { BT_ERR("%s corrupted event packet", hdev->name); hdev->stat.err_rx++; } } else if (urb->status == -ENOENT) { /* Avoid suspend failed when usb_kill_urb */ return; } if (!test_bit(BTUSB_INTR_RUNNING, &data->flags)) return; usb_mark_last_busy(data->udev); usb_anchor_urb(urb, &data->intr_anchor); err = usb_submit_urb(urb, GFP_ATOMIC); if (err < 0) { /* -EPERM: urb is being killed; * -ENODEV: device got disconnected */ if (err != -EPERM && err != -ENODEV) BT_ERR("%s urb %p failed to resubmit (%d)", hdev->name, urb, -err); usb_unanchor_urb(urb); } } static int btusb_submit_intr_urb(struct hci_dev *hdev, gfp_t mem_flags) { struct btusb_data *data = hci_get_drvdata(hdev); struct urb *urb; unsigned char *buf; unsigned int pipe; int err, size; BT_DBG("%s", hdev->name); if (!data->intr_ep) return -ENODEV; urb = usb_alloc_urb(0, mem_flags); if (!urb) return -ENOMEM; size = le16_to_cpu(data->intr_ep->wMaxPacketSize); buf = kmalloc(size, mem_flags); if (!buf) { usb_free_urb(urb); return -ENOMEM; } pipe = usb_rcvintpipe(data->udev, data->intr_ep->bEndpointAddress); usb_fill_int_urb(urb, data->udev, pipe, buf, size, btusb_intr_complete, hdev, data->intr_ep->bInterval); urb->transfer_flags |= URB_FREE_BUFFER; usb_anchor_urb(urb, &data->intr_anchor); err = usb_submit_urb(urb, mem_flags); if (err < 0) { if (err != -EPERM && err != -ENODEV) BT_ERR("%s urb %p submission failed (%d)", hdev->name, urb, -err); usb_unanchor_urb(urb); } usb_free_urb(urb); return err; } static void btusb_bulk_complete(struct urb *urb) { struct hci_dev *hdev = urb->context; struct btusb_data *data = hci_get_drvdata(hdev); int err; BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status, urb->actual_length); if (!test_bit(HCI_RUNNING, &hdev->flags)) return; if (urb->status == 0) { hdev->stat.byte_rx += urb->actual_length; if (data->recv_bulk(data, urb->transfer_buffer, urb->actual_length) < 0) { BT_ERR("%s corrupted ACL packet", hdev->name); hdev->stat.err_rx++; } } else if (urb->status == -ENOENT) { /* Avoid suspend failed when usb_kill_urb */ return; } if (!test_bit(BTUSB_BULK_RUNNING, &data->flags)) return; usb_anchor_urb(urb, &data->bulk_anchor); usb_mark_last_busy(data->udev); err = usb_submit_urb(urb, GFP_ATOMIC); if (err < 0) { /* -EPERM: urb is being killed; * -ENODEV: device got disconnected */ if (err != -EPERM && err != -ENODEV) BT_ERR("%s urb %p failed to resubmit (%d)", hdev->name, urb, -err); usb_unanchor_urb(urb); } } static int btusb_submit_bulk_urb(struct hci_dev *hdev, gfp_t mem_flags) { struct btusb_data *data = hci_get_drvdata(hdev); struct urb *urb; unsigned char *buf; unsigned int pipe; int err, size = HCI_MAX_FRAME_SIZE; BT_DBG("%s", hdev->name); if (!data->bulk_rx_ep) return -ENODEV; urb = usb_alloc_urb(0, mem_flags); if (!urb) return -ENOMEM; buf = kmalloc(size, mem_flags); if (!buf) { usb_free_urb(urb); return -ENOMEM; } pipe = usb_rcvbulkpipe(data->udev, data->bulk_rx_ep->bEndpointAddress); usb_fill_bulk_urb(urb, data->udev, pipe, buf, size, btusb_bulk_complete, hdev); urb->transfer_flags |= URB_FREE_BUFFER; usb_mark_last_busy(data->udev); usb_anchor_urb(urb, &data->bulk_anchor); err = usb_submit_urb(urb, mem_flags); if (err < 0) { if (err != -EPERM && err != -ENODEV) BT_ERR("%s urb %p submission failed (%d)", hdev->name, urb, -err); usb_unanchor_urb(urb); } usb_free_urb(urb); return err; } static void btusb_isoc_complete(struct urb *urb) { struct hci_dev *hdev = urb->context; struct btusb_data *data = hci_get_drvdata(hdev); int i, err; BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status, urb->actual_length); if (!test_bit(HCI_RUNNING, &hdev->flags)) return; if (urb->status == 0) { for (i = 0; i < urb->number_of_packets; i++) { unsigned int offset = urb->iso_frame_desc[i].offset; unsigned int length = urb->iso_frame_desc[i].actual_length; if (urb->iso_frame_desc[i].status) continue; hdev->stat.byte_rx += length; if (btusb_recv_isoc(data, urb->transfer_buffer + offset, length) < 0) { BT_ERR("%s corrupted SCO packet", hdev->name); hdev->stat.err_rx++; } } } else if (urb->status == -ENOENT) { /* Avoid suspend failed when usb_kill_urb */ return; } if (!test_bit(BTUSB_ISOC_RUNNING, &data->flags)) return; usb_anchor_urb(urb, &data->isoc_anchor); err = usb_submit_urb(urb, GFP_ATOMIC); if (err < 0) { /* -EPERM: urb is being killed; * -ENODEV: device got disconnected */ if (err != -EPERM && err != -ENODEV) BT_ERR("%s urb %p failed to resubmit (%d)", hdev->name, urb, -err); usb_unanchor_urb(urb); } } static inline void __fill_isoc_descriptor(struct urb *urb, int len, int mtu) { int i, offset = 0; BT_DBG("len %d mtu %d", len, mtu); for (i = 0; i < BTUSB_MAX_ISOC_FRAMES && len >= mtu; i++, offset += mtu, len -= mtu) { urb->iso_frame_desc[i].offset = offset; urb->iso_frame_desc[i].length = mtu; } if (len && i < BTUSB_MAX_ISOC_FRAMES) { urb->iso_frame_desc[i].offset = offset; urb->iso_frame_desc[i].length = len; i++; } urb->number_of_packets = i; } static int btusb_submit_isoc_urb(struct hci_dev *hdev, gfp_t mem_flags) { struct btusb_data *data = hci_get_drvdata(hdev); struct urb *urb; unsigned char *buf; unsigned int pipe; int err, size; BT_DBG("%s", hdev->name); if (!data->isoc_rx_ep) return -ENODEV; urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, mem_flags); if (!urb) return -ENOMEM; size = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize) * BTUSB_MAX_ISOC_FRAMES; buf = kmalloc(size, mem_flags); if (!buf) { usb_free_urb(urb); return -ENOMEM; } pipe = usb_rcvisocpipe(data->udev, data->isoc_rx_ep->bEndpointAddress); usb_fill_int_urb(urb, data->udev, pipe, buf, size, btusb_isoc_complete, hdev, data->isoc_rx_ep->bInterval); urb->transfer_flags = URB_FREE_BUFFER | URB_ISO_ASAP; __fill_isoc_descriptor(urb, size, le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize)); usb_anchor_urb(urb, &data->isoc_anchor); err = usb_submit_urb(urb, mem_flags); if (err < 0) { if (err != -EPERM && err != -ENODEV) BT_ERR("%s urb %p submission failed (%d)", hdev->name, urb, -err); usb_unanchor_urb(urb); } usb_free_urb(urb); return err; } static void btusb_tx_complete(struct urb *urb) { struct sk_buff *skb = urb->context; struct hci_dev *hdev = (struct hci_dev *)skb->dev; struct btusb_data *data = hci_get_drvdata(hdev); BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status, urb->actual_length); if (!test_bit(HCI_RUNNING, &hdev->flags)) goto done; if (!urb->status) hdev->stat.byte_tx += urb->transfer_buffer_length; else hdev->stat.err_tx++; done: spin_lock(&data->txlock); data->tx_in_flight--; spin_unlock(&data->txlock); kfree(urb->setup_packet); kfree_skb(skb); } static void btusb_isoc_tx_complete(struct urb *urb) { struct sk_buff *skb = urb->context; struct hci_dev *hdev = (struct hci_dev *)skb->dev; BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status, urb->actual_length); if (!test_bit(HCI_RUNNING, &hdev->flags)) goto done; if (!urb->status) hdev->stat.byte_tx += urb->transfer_buffer_length; else hdev->stat.err_tx++; done: kfree(urb->setup_packet); kfree_skb(skb); } static int btusb_open(struct hci_dev *hdev) { struct btusb_data *data = hci_get_drvdata(hdev); int err; BT_DBG("%s", hdev->name); /* Patching USB firmware files prior to starting any URBs of HCI path * It is more safe to use USB bulk channel for downloading USB patch */ if (data->setup_on_usb) { err = data->setup_on_usb(hdev); if (err <0) return err; } err = usb_autopm_get_interface(data->intf); if (err < 0) return err; data->intf->needs_remote_wakeup = 1; if (test_and_set_bit(HCI_RUNNING, &hdev->flags)) goto done; if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags)) goto done; err = btusb_submit_intr_urb(hdev, GFP_KERNEL); if (err < 0) goto failed; err = btusb_submit_bulk_urb(hdev, GFP_KERNEL); if (err < 0) { usb_kill_anchored_urbs(&data->intr_anchor); goto failed; } set_bit(BTUSB_BULK_RUNNING, &data->flags); btusb_submit_bulk_urb(hdev, GFP_KERNEL); done: usb_autopm_put_interface(data->intf); return 0; failed: clear_bit(BTUSB_INTR_RUNNING, &data->flags); clear_bit(HCI_RUNNING, &hdev->flags); usb_autopm_put_interface(data->intf); return err; } static void btusb_stop_traffic(struct btusb_data *data) { usb_kill_anchored_urbs(&data->intr_anchor); usb_kill_anchored_urbs(&data->bulk_anchor); usb_kill_anchored_urbs(&data->isoc_anchor); } static int btusb_close(struct hci_dev *hdev) { struct btusb_data *data = hci_get_drvdata(hdev); int err; BT_DBG("%s", hdev->name); if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags)) return 0; cancel_work_sync(&data->work); cancel_work_sync(&data->waker); clear_bit(BTUSB_ISOC_RUNNING, &data->flags); clear_bit(BTUSB_BULK_RUNNING, &data->flags); clear_bit(BTUSB_INTR_RUNNING, &data->flags); btusb_stop_traffic(data); btusb_free_frags(data); err = usb_autopm_get_interface(data->intf); if (err < 0) goto failed; data->intf->needs_remote_wakeup = 0; usb_autopm_put_interface(data->intf); failed: usb_scuttle_anchored_urbs(&data->deferred); return 0; } static int btusb_flush(struct hci_dev *hdev) { struct btusb_data *data = hci_get_drvdata(hdev); BT_DBG("%s", hdev->name); usb_kill_anchored_urbs(&data->tx_anchor); btusb_free_frags(data); return 0; } static struct urb *alloc_ctrl_urb(struct hci_dev *hdev, struct sk_buff *skb) { struct btusb_data *data = hci_get_drvdata(hdev); struct usb_ctrlrequest *dr; struct urb *urb; unsigned int pipe; urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) return ERR_PTR(-ENOMEM); dr = kmalloc(sizeof(*dr), GFP_KERNEL); if (!dr) { usb_free_urb(urb); return ERR_PTR(-ENOMEM); } dr->bRequestType = data->cmdreq_type; dr->bRequest = data->cmdreq; dr->wIndex = 0; dr->wValue = 0; dr->wLength = __cpu_to_le16(skb->len); pipe = usb_sndctrlpipe(data->udev, 0x00); usb_fill_control_urb(urb, data->udev, pipe, (void *)dr, skb->data, skb->len, btusb_tx_complete, skb); skb->dev = (void *)hdev; return urb; } static struct urb *alloc_bulk_urb(struct hci_dev *hdev, struct sk_buff *skb) { struct btusb_data *data = hci_get_drvdata(hdev); struct urb *urb; unsigned int pipe; if (!data->bulk_tx_ep) return ERR_PTR(-ENODEV); urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) return ERR_PTR(-ENOMEM); pipe = usb_sndbulkpipe(data->udev, data->bulk_tx_ep->bEndpointAddress); usb_fill_bulk_urb(urb, data->udev, pipe, skb->data, skb->len, btusb_tx_complete, skb); skb->dev = (void *)hdev; return urb; } static struct urb *alloc_isoc_urb(struct hci_dev *hdev, struct sk_buff *skb) { struct btusb_data *data = hci_get_drvdata(hdev); struct urb *urb; unsigned int pipe; if (!data->isoc_tx_ep) return ERR_PTR(-ENODEV); urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_KERNEL); if (!urb) return ERR_PTR(-ENOMEM); pipe = usb_sndisocpipe(data->udev, data->isoc_tx_ep->bEndpointAddress); usb_fill_int_urb(urb, data->udev, pipe, skb->data, skb->len, btusb_isoc_tx_complete, skb, data->isoc_tx_ep->bInterval); urb->transfer_flags = URB_ISO_ASAP; __fill_isoc_descriptor(urb, skb->len, le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize)); skb->dev = (void *)hdev; return urb; } static int submit_tx_urb(struct hci_dev *hdev, struct urb *urb) { struct btusb_data *data = hci_get_drvdata(hdev); int err; usb_anchor_urb(urb, &data->tx_anchor); err = usb_submit_urb(urb, GFP_KERNEL); if (err < 0) { if (err != -EPERM && err != -ENODEV) BT_ERR("%s urb %p submission failed (%d)", hdev->name, urb, -err); kfree(urb->setup_packet); usb_unanchor_urb(urb); } else { usb_mark_last_busy(data->udev); } usb_free_urb(urb); return err; } static int submit_or_queue_tx_urb(struct hci_dev *hdev, struct urb *urb) { struct btusb_data *data = hci_get_drvdata(hdev); unsigned long flags; bool suspending; spin_lock_irqsave(&data->txlock, flags); suspending = test_bit(BTUSB_SUSPENDING, &data->flags); if (!suspending) data->tx_in_flight++; spin_unlock_irqrestore(&data->txlock, flags); if (!suspending) return submit_tx_urb(hdev, urb); usb_anchor_urb(urb, &data->deferred); schedule_work(&data->waker); usb_free_urb(urb); return 0; } static int btusb_send_frame(struct hci_dev *hdev, struct sk_buff *skb) { struct urb *urb; BT_DBG("%s", hdev->name); if (!test_bit(HCI_RUNNING, &hdev->flags)) return -EBUSY; switch (bt_cb(skb)->pkt_type) { case HCI_COMMAND_PKT: urb = alloc_ctrl_urb(hdev, skb); if (IS_ERR(urb)) return PTR_ERR(urb); hdev->stat.cmd_tx++; return submit_or_queue_tx_urb(hdev, urb); case HCI_ACLDATA_PKT: urb = alloc_bulk_urb(hdev, skb); if (IS_ERR(urb)) return PTR_ERR(urb); hdev->stat.acl_tx++; return submit_or_queue_tx_urb(hdev, urb); case HCI_SCODATA_PKT: if (hci_conn_num(hdev, SCO_LINK) < 1) return -ENODEV; urb = alloc_isoc_urb(hdev, skb); if (IS_ERR(urb)) return PTR_ERR(urb); hdev->stat.sco_tx++; return submit_tx_urb(hdev, urb); } return -EILSEQ; } static void btusb_notify(struct hci_dev *hdev, unsigned int evt) { struct btusb_data *data = hci_get_drvdata(hdev); BT_DBG("%s evt %d", hdev->name, evt); if (hci_conn_num(hdev, SCO_LINK) != data->sco_num) { data->sco_num = hci_conn_num(hdev, SCO_LINK); schedule_work(&data->work); } } static inline int __set_isoc_interface(struct hci_dev *hdev, int altsetting) { struct btusb_data *data = hci_get_drvdata(hdev); struct usb_interface *intf = data->isoc; struct usb_endpoint_descriptor *ep_desc; int i, err; if (!data->isoc) return -ENODEV; err = usb_set_interface(data->udev, 1, altsetting); if (err < 0) { BT_ERR("%s setting interface failed (%d)", hdev->name, -err); return err; } data->isoc_altsetting = altsetting; data->isoc_tx_ep = NULL; data->isoc_rx_ep = NULL; for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) { ep_desc = &intf->cur_altsetting->endpoint[i].desc; if (!data->isoc_tx_ep && usb_endpoint_is_isoc_out(ep_desc)) { data->isoc_tx_ep = ep_desc; continue; } if (!data->isoc_rx_ep && usb_endpoint_is_isoc_in(ep_desc)) { data->isoc_rx_ep = ep_desc; continue; } } if (!data->isoc_tx_ep || !data->isoc_rx_ep) { BT_ERR("%s invalid SCO descriptors", hdev->name); return -ENODEV; } return 0; } static void btusb_work(struct work_struct *work) { struct btusb_data *data = container_of(work, struct btusb_data, work); struct hci_dev *hdev = data->hdev; int new_alts; int err; if (data->sco_num > 0) { if (!test_bit(BTUSB_DID_ISO_RESUME, &data->flags)) { err = usb_autopm_get_interface(data->isoc ? data->isoc : data->intf); if (err < 0) { clear_bit(BTUSB_ISOC_RUNNING, &data->flags); usb_kill_anchored_urbs(&data->isoc_anchor); return; } set_bit(BTUSB_DID_ISO_RESUME, &data->flags); } if (hdev->voice_setting & 0x0020) { static const int alts[3] = { 2, 4, 5 }; new_alts = alts[data->sco_num - 1]; } else { new_alts = data->sco_num; } if (data->isoc_altsetting != new_alts) { clear_bit(BTUSB_ISOC_RUNNING, &data->flags); usb_kill_anchored_urbs(&data->isoc_anchor); if (__set_isoc_interface(hdev, new_alts) < 0) return; } if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) { if (btusb_submit_isoc_urb(hdev, GFP_KERNEL) < 0) clear_bit(BTUSB_ISOC_RUNNING, &data->flags); else btusb_submit_isoc_urb(hdev, GFP_KERNEL); } } else { clear_bit(BTUSB_ISOC_RUNNING, &data->flags); usb_kill_anchored_urbs(&data->isoc_anchor); __set_isoc_interface(hdev, 0); if (test_and_clear_bit(BTUSB_DID_ISO_RESUME, &data->flags)) usb_autopm_put_interface(data->isoc ? data->isoc : data->intf); } } static void btusb_waker(struct work_struct *work) { struct btusb_data *data = container_of(work, struct btusb_data, waker); int err; err = usb_autopm_get_interface(data->intf); if (err < 0) return; usb_autopm_put_interface(data->intf); } static struct sk_buff *btusb_read_local_version(struct hci_dev *hdev) { struct sk_buff *skb; skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)", hdev->name, PTR_ERR(skb)); return skb; } if (skb->len != sizeof(struct hci_rp_read_local_version)) { BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch", hdev->name); kfree_skb(skb); return ERR_PTR(-EIO); } return skb; } static int btusb_setup_bcm92035(struct hci_dev *hdev) { struct sk_buff *skb; u8 val = 0x00; BT_DBG("%s", hdev->name); skb = __hci_cmd_sync(hdev, 0xfc3b, 1, &val, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) BT_ERR("BCM92035 command failed (%ld)", -PTR_ERR(skb)); else kfree_skb(skb); return 0; } static int btusb_setup_csr(struct hci_dev *hdev) { struct hci_rp_read_local_version *rp; struct sk_buff *skb; int ret; BT_DBG("%s", hdev->name); skb = btusb_read_local_version(hdev); if (IS_ERR(skb)) return -PTR_ERR(skb); rp = (struct hci_rp_read_local_version *)skb->data; if (!rp->status) { if (le16_to_cpu(rp->manufacturer) != 10) { /* Clear the reset quirk since this is not an actual * early Bluetooth 1.1 device from CSR. */ clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); /* These fake CSR controllers have all a broken * stored link key handling and so just disable it. */ set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks); } } ret = -bt_to_errno(rp->status); kfree_skb(skb); return ret; } struct intel_version { u8 status; u8 hw_platform; u8 hw_variant; u8 hw_revision; u8 fw_variant; u8 fw_revision; u8 fw_build_num; u8 fw_build_ww; u8 fw_build_yy; u8 fw_patch_num; } __packed; struct intel_boot_params { __u8 status; __u8 otp_format; __u8 otp_content; __u8 otp_patch; __le16 dev_revid; __u8 secure_boot; __u8 key_from_hdr; __u8 key_type; __u8 otp_lock; __u8 api_lock; __u8 debug_lock; bdaddr_t otp_bdaddr; __u8 min_fw_build_nn; __u8 min_fw_build_cw; __u8 min_fw_build_yy; __u8 limited_cce; __u8 unlocked_state; } __packed; static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev, struct intel_version *ver) { const struct firmware *fw; char fwname[64]; int ret; snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq", ver->hw_platform, ver->hw_variant, ver->hw_revision, ver->fw_variant, ver->fw_revision, ver->fw_build_num, ver->fw_build_ww, ver->fw_build_yy); ret = request_firmware(&fw, fwname, &hdev->dev); if (ret < 0) { if (ret == -EINVAL) { BT_ERR("%s Intel firmware file request failed (%d)", hdev->name, ret); return NULL; } BT_ERR("%s failed to open Intel firmware file: %s(%d)", hdev->name, fwname, ret); /* If the correct firmware patch file is not found, use the * default firmware patch file instead */ snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bseq", ver->hw_platform, ver->hw_variant); if (request_firmware(&fw, fwname, &hdev->dev) < 0) { BT_ERR("%s failed to open default Intel fw file: %s", hdev->name, fwname); return NULL; } } BT_INFO("%s: Intel Bluetooth firmware file: %s", hdev->name, fwname); return fw; } static int btusb_setup_intel_patching(struct hci_dev *hdev, const struct firmware *fw, const u8 **fw_ptr, int *disable_patch) { struct sk_buff *skb; struct hci_command_hdr *cmd; const u8 *cmd_param; struct hci_event_hdr *evt = NULL; const u8 *evt_param = NULL; int remain = fw->size - (*fw_ptr - fw->data); /* The first byte indicates the types of the patch command or event. * 0x01 means HCI command and 0x02 is HCI event. If the first bytes * in the current firmware buffer doesn't start with 0x01 or * the size of remain buffer is smaller than HCI command header, * the firmware file is corrupted and it should stop the patching * process. */ if (remain > HCI_COMMAND_HDR_SIZE && *fw_ptr[0] != 0x01) { BT_ERR("%s Intel fw corrupted: invalid cmd read", hdev->name); return -EINVAL; } (*fw_ptr)++; remain--; cmd = (struct hci_command_hdr *)(*fw_ptr); *fw_ptr += sizeof(*cmd); remain -= sizeof(*cmd); /* Ensure that the remain firmware data is long enough than the length * of command parameter. If not, the firmware file is corrupted. */ if (remain < cmd->plen) { BT_ERR("%s Intel fw corrupted: invalid cmd len", hdev->name); return -EFAULT; } /* If there is a command that loads a patch in the firmware * file, then enable the patch upon success, otherwise just * disable the manufacturer mode, for example patch activation * is not required when the default firmware patch file is used * because there are no patch data to load. */ if (*disable_patch && le16_to_cpu(cmd->opcode) == 0xfc8e) *disable_patch = 0; cmd_param = *fw_ptr; *fw_ptr += cmd->plen; remain -= cmd->plen; /* This reads the expected events when the above command is sent to the * device. Some vendor commands expects more than one events, for * example command status event followed by vendor specific event. * For this case, it only keeps the last expected event. so the command * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of * last expected event. */ while (remain > HCI_EVENT_HDR_SIZE && *fw_ptr[0] == 0x02) { (*fw_ptr)++; remain--; evt = (struct hci_event_hdr *)(*fw_ptr); *fw_ptr += sizeof(*evt); remain -= sizeof(*evt); if (remain < evt->plen) { BT_ERR("%s Intel fw corrupted: invalid evt len", hdev->name); return -EFAULT; } evt_param = *fw_ptr; *fw_ptr += evt->plen; remain -= evt->plen; } /* Every HCI commands in the firmware file has its correspond event. * If event is not found or remain is smaller than zero, the firmware * file is corrupted. */ if (!evt || !evt_param || remain < 0) { BT_ERR("%s Intel fw corrupted: invalid evt read", hdev->name); return -EFAULT; } skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), cmd->plen, cmd_param, evt->evt, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { BT_ERR("%s sending Intel patch command (0x%4.4x) failed (%ld)", hdev->name, cmd->opcode, PTR_ERR(skb)); return PTR_ERR(skb); } /* It ensures that the returned event matches the event data read from * the firmware file. At fist, it checks the length and then * the contents of the event. */ if (skb->len != evt->plen) { BT_ERR("%s mismatch event length (opcode 0x%4.4x)", hdev->name, le16_to_cpu(cmd->opcode)); kfree_skb(skb); return -EFAULT; } if (memcmp(skb->data, evt_param, evt->plen)) { BT_ERR("%s mismatch event parameter (opcode 0x%4.4x)", hdev->name, le16_to_cpu(cmd->opcode)); kfree_skb(skb); return -EFAULT; } kfree_skb(skb); return 0; } #define BDADDR_INTEL (&(bdaddr_t) {{0x00, 0x8b, 0x9e, 0x19, 0x03, 0x00}}) static int btusb_check_bdaddr_intel(struct hci_dev *hdev) { struct sk_buff *skb; struct hci_rp_read_bd_addr *rp; skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { BT_ERR("%s reading Intel device address failed (%ld)", hdev->name, PTR_ERR(skb)); return PTR_ERR(skb); } if (skb->len != sizeof(*rp)) { BT_ERR("%s Intel device address length mismatch", hdev->name); kfree_skb(skb); return -EIO; } rp = (struct hci_rp_read_bd_addr *)skb->data; if (rp->status) { BT_ERR("%s Intel device address result failed (%02x)", hdev->name, rp->status); kfree_skb(skb); return -bt_to_errno(rp->status); } /* For some Intel based controllers, the default Bluetooth device * address 00:03:19:9E:8B:00 can be found. These controllers are * fully operational, but have the danger of duplicate addresses * and that in turn can cause problems with Bluetooth operation. */ if (!bacmp(&rp->bdaddr, BDADDR_INTEL)) { BT_ERR("%s found Intel default device address (%pMR)", hdev->name, &rp->bdaddr); set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks); } kfree_skb(skb); return 0; } static int btusb_setup_intel(struct hci_dev *hdev) { struct sk_buff *skb; const struct firmware *fw; const u8 *fw_ptr; int disable_patch; struct intel_version *ver; const u8 mfg_enable[] = { 0x01, 0x00 }; const u8 mfg_disable[] = { 0x00, 0x00 }; const u8 mfg_reset_deactivate[] = { 0x00, 0x01 }; const u8 mfg_reset_activate[] = { 0x00, 0x02 }; BT_DBG("%s", hdev->name); /* The controller has a bug with the first HCI command sent to it * returning number of completed commands as zero. This would stall the * command processing in the Bluetooth core. * * As a workaround, send HCI Reset command first which will reset the * number of completed commands and allow normal command processing * from now on. */ skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { BT_ERR("%s sending initial HCI reset command failed (%ld)", hdev->name, PTR_ERR(skb)); return PTR_ERR(skb); } kfree_skb(skb); /* Read Intel specific controller version first to allow selection of * which firmware file to load. * * The returned information are hardware variant and revision plus * firmware variant, revision and build number. */ skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { BT_ERR("%s reading Intel fw version command failed (%ld)", hdev->name, PTR_ERR(skb)); return PTR_ERR(skb); } if (skb->len != sizeof(*ver)) { BT_ERR("%s Intel version event length mismatch", hdev->name); kfree_skb(skb); return -EIO; } ver = (struct intel_version *)skb->data; if (ver->status) { BT_ERR("%s Intel fw version event failed (%02x)", hdev->name, ver->status); kfree_skb(skb); return -bt_to_errno(ver->status); } BT_INFO("%s: read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x", hdev->name, ver->hw_platform, ver->hw_variant, ver->hw_revision, ver->fw_variant, ver->fw_revision, ver->fw_build_num, ver->fw_build_ww, ver->fw_build_yy, ver->fw_patch_num); /* fw_patch_num indicates the version of patch the device currently * have. If there is no patch data in the device, it is always 0x00. * So, if it is other than 0x00, no need to patch the deivce again. */ if (ver->fw_patch_num) { BT_INFO("%s: Intel device is already patched. patch num: %02x", hdev->name, ver->fw_patch_num); kfree_skb(skb); btusb_check_bdaddr_intel(hdev); return 0; } /* Opens the firmware patch file based on the firmware version read * from the controller. If it fails to open the matching firmware * patch file, it tries to open the default firmware patch file. * If no patch file is found, allow the device to operate without * a patch. */ fw = btusb_setup_intel_get_fw(hdev, ver); if (!fw) { kfree_skb(skb); btusb_check_bdaddr_intel(hdev); return 0; } fw_ptr = fw->data; /* This Intel specific command enables the manufacturer mode of the * controller. * * Only while this mode is enabled, the driver can download the * firmware patch data and configuration parameters. */ skb = __hci_cmd_sync(hdev, 0xfc11, 2, mfg_enable, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { BT_ERR("%s entering Intel manufacturer mode failed (%ld)", hdev->name, PTR_ERR(skb)); release_firmware(fw); return PTR_ERR(skb); } if (skb->data[0]) { u8 evt_status = skb->data[0]; BT_ERR("%s enable Intel manufacturer mode event failed (%02x)", hdev->name, evt_status); kfree_skb(skb); release_firmware(fw); return -bt_to_errno(evt_status); } kfree_skb(skb); disable_patch = 1; /* The firmware data file consists of list of Intel specific HCI * commands and its expected events. The first byte indicates the * type of the message, either HCI command or HCI event. * * It reads the command and its expected event from the firmware file, * and send to the controller. Once __hci_cmd_sync_ev() returns, * the returned event is compared with the event read from the firmware * file and it will continue until all the messages are downloaded to * the controller. * * Once the firmware patching is completed successfully, * the manufacturer mode is disabled with reset and activating the * downloaded patch. * * If the firmware patching fails, the manufacturer mode is * disabled with reset and deactivating the patch. * * If the default patch file is used, no reset is done when disabling * the manufacturer. */ while (fw->size > fw_ptr - fw->data) { int ret; ret = btusb_setup_intel_patching(hdev, fw, &fw_ptr, &disable_patch); if (ret < 0) goto exit_mfg_deactivate; } release_firmware(fw); if (disable_patch) goto exit_mfg_disable; /* Patching completed successfully and disable the manufacturer mode * with reset and activate the downloaded firmware patches. */ skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_reset_activate), mfg_reset_activate, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { BT_ERR("%s exiting Intel manufacturer mode failed (%ld)", hdev->name, PTR_ERR(skb)); return PTR_ERR(skb); } kfree_skb(skb); BT_INFO("%s: Intel Bluetooth firmware patch completed and activated", hdev->name); btusb_check_bdaddr_intel(hdev); return 0; exit_mfg_disable: /* Disable the manufacturer mode without reset */ skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_disable), mfg_disable, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { BT_ERR("%s exiting Intel manufacturer mode failed (%ld)", hdev->name, PTR_ERR(skb)); return PTR_ERR(skb); } kfree_skb(skb); BT_INFO("%s: Intel Bluetooth firmware patch completed", hdev->name); btusb_check_bdaddr_intel(hdev); return 0; exit_mfg_deactivate: release_firmware(fw); /* Patching failed. Disable the manufacturer mode with reset and * deactivate the downloaded firmware patches. */ skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_reset_deactivate), mfg_reset_deactivate, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { BT_ERR("%s exiting Intel manufacturer mode failed (%ld)", hdev->name, PTR_ERR(skb)); return PTR_ERR(skb); } kfree_skb(skb); BT_INFO("%s: Intel Bluetooth firmware patch completed and deactivated", hdev->name); btusb_check_bdaddr_intel(hdev); return 0; } static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode) { struct sk_buff *skb; struct hci_event_hdr *hdr; struct hci_ev_cmd_complete *evt; skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_ATOMIC); if (!skb) return -ENOMEM; hdr = (struct hci_event_hdr *)skb_put(skb, sizeof(*hdr)); hdr->evt = HCI_EV_CMD_COMPLETE; hdr->plen = sizeof(*evt) + 1; evt = (struct hci_ev_cmd_complete *)skb_put(skb, sizeof(*evt)); evt->ncmd = 0x01; evt->opcode = cpu_to_le16(opcode); *skb_put(skb, 1) = 0x00; bt_cb(skb)->pkt_type = HCI_EVENT_PKT; return hci_recv_frame(hdev, skb); } static int btusb_recv_bulk_intel(struct btusb_data *data, void *buffer, int count) { /* When the device is in bootloader mode, then it can send * events via the bulk endpoint. These events are treated the * same way as the ones received from the interrupt endpoint. */ if (test_bit(BTUSB_BOOTLOADER, &data->flags)) return btusb_recv_intr(data, buffer, count); return btusb_recv_bulk(data, buffer, count); } static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb) { struct btusb_data *data = hci_get_drvdata(hdev); if (test_bit(BTUSB_BOOTLOADER, &data->flags)) { struct hci_event_hdr *hdr = (void *)skb->data; /* When the firmware loading completes the device sends * out a vendor specific event indicating the result of * the firmware loading. */ if (skb->len == 7 && hdr->evt == 0xff && hdr->plen == 0x05 && skb->data[2] == 0x06) { if (skb->data[3] != 0x00) test_bit(BTUSB_FIRMWARE_FAILED, &data->flags); if (test_and_clear_bit(BTUSB_DOWNLOADING, &data->flags) && test_bit(BTUSB_FIRMWARE_LOADED, &data->flags)) { smp_mb__after_atomic(); wake_up_bit(&data->flags, BTUSB_DOWNLOADING); } } /* When switching to the operational firmware the device * sends a vendor specific event indicating that the bootup * completed. */ if (skb->len == 9 && hdr->evt == 0xff && hdr->plen == 0x07 && skb->data[2] == 0x02) { if (test_and_clear_bit(BTUSB_BOOTING, &data->flags)) { smp_mb__after_atomic(); wake_up_bit(&data->flags, BTUSB_BOOTING); } } } return hci_recv_frame(hdev, skb); } static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb) { struct btusb_data *data = hci_get_drvdata(hdev); struct urb *urb; BT_DBG("%s", hdev->name); if (!test_bit(HCI_RUNNING, &hdev->flags)) return -EBUSY; switch (bt_cb(skb)->pkt_type) { case HCI_COMMAND_PKT: if (test_bit(BTUSB_BOOTLOADER, &data->flags)) { struct hci_command_hdr *cmd = (void *)skb->data; __u16 opcode = le16_to_cpu(cmd->opcode); /* When in bootloader mode and the command 0xfc09 * is received, it needs to be send down the * bulk endpoint. So allocate a bulk URB instead. */ if (opcode == 0xfc09) urb = alloc_bulk_urb(hdev, skb); else urb = alloc_ctrl_urb(hdev, skb); /* When the 0xfc01 command is issued to boot into * the operational firmware, it will actually not * send a command complete event. To keep the flow * control working inject that event here. */ if (opcode == 0xfc01) inject_cmd_complete(hdev, opcode); } else { urb = alloc_ctrl_urb(hdev, skb); } if (IS_ERR(urb)) return PTR_ERR(urb); hdev->stat.cmd_tx++; return submit_or_queue_tx_urb(hdev, urb); case HCI_ACLDATA_PKT: urb = alloc_bulk_urb(hdev, skb); if (IS_ERR(urb)) return PTR_ERR(urb); hdev->stat.acl_tx++; return submit_or_queue_tx_urb(hdev, urb); case HCI_SCODATA_PKT: if (hci_conn_num(hdev, SCO_LINK) < 1) return -ENODEV; urb = alloc_isoc_urb(hdev, skb); if (IS_ERR(urb)) return PTR_ERR(urb); hdev->stat.sco_tx++; return submit_tx_urb(hdev, urb); } return -EILSEQ; } static int btusb_intel_secure_send(struct hci_dev *hdev, u8 fragment_type, u32 plen, const void *param) { while (plen > 0) { struct sk_buff *skb; u8 cmd_param[253], fragment_len = (plen > 252) ? 252 : plen; cmd_param[0] = fragment_type; memcpy(cmd_param + 1, param, fragment_len); skb = __hci_cmd_sync(hdev, 0xfc09, fragment_len + 1, cmd_param, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) return PTR_ERR(skb); kfree_skb(skb); plen -= fragment_len; param += fragment_len; } return 0; } static void btusb_intel_version_info(struct hci_dev *hdev, struct intel_version *ver) { const char *variant; switch (ver->fw_variant) { case 0x06: variant = "Bootloader"; break; case 0x23: variant = "Firmware"; break; default: return; } BT_INFO("%s: %s revision %u.%u build %u week %u %u", hdev->name, variant, ver->fw_revision >> 4, ver->fw_revision & 0x0f, ver->fw_build_num, ver->fw_build_ww, 2000 + ver->fw_build_yy); } static int btusb_setup_intel_new(struct hci_dev *hdev) { static const u8 reset_param[] = { 0x00, 0x01, 0x00, 0x01, 0x00, 0x08, 0x04, 0x00 }; struct btusb_data *data = hci_get_drvdata(hdev); struct sk_buff *skb; struct intel_version *ver; struct intel_boot_params *params; const struct firmware *fw; const u8 *fw_ptr; char fwname[64]; ktime_t calltime, delta, rettime; unsigned long long duration; int err; BT_DBG("%s", hdev->name); calltime = ktime_get(); /* Read the Intel version information to determine if the device * is in bootloader mode or if it already has operational firmware * loaded. */ skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { BT_ERR("%s: Reading Intel version information failed (%ld)", hdev->name, PTR_ERR(skb)); return PTR_ERR(skb); } if (skb->len != sizeof(*ver)) { BT_ERR("%s: Intel version event size mismatch", hdev->name); kfree_skb(skb); return -EILSEQ; } ver = (struct intel_version *)skb->data; if (ver->status) { BT_ERR("%s: Intel version command failure (%02x)", hdev->name, ver->status); err = -bt_to_errno(ver->status); kfree_skb(skb); return err; } /* The hardware platform number has a fixed value of 0x37 and * for now only accept this single value. */ if (ver->hw_platform != 0x37) { BT_ERR("%s: Unsupported Intel hardware platform (%u)", hdev->name, ver->hw_platform); kfree_skb(skb); return -EINVAL; } /* At the moment only the hardware variant iBT 3.0 (LnP/SfP) is * supported by this firmware loading method. This check has been * put in place to ensure correct forward compatibility options * when newer hardware variants come along. */ if (ver->hw_variant != 0x0b) { BT_ERR("%s: Unsupported Intel hardware variant (%u)", hdev->name, ver->hw_variant); kfree_skb(skb); return -EINVAL; } btusb_intel_version_info(hdev, ver); /* The firmware variant determines if the device is in bootloader * mode or is running operational firmware. The value 0x06 identifies * the bootloader and the value 0x23 identifies the operational * firmware. * * When the operational firmware is already present, then only * the check for valid Bluetooth device address is needed. This * determines if the device will be added as configured or * unconfigured controller. * * It is not possible to use the Secure Boot Parameters in this * case since that command is only available in bootloader mode. */ if (ver->fw_variant == 0x23) { kfree_skb(skb); clear_bit(BTUSB_BOOTLOADER, &data->flags); btusb_check_bdaddr_intel(hdev); return 0; } /* If the device is not in bootloader mode, then the only possible * choice is to return an error and abort the device initialization. */ if (ver->fw_variant != 0x06) { BT_ERR("%s: Unsupported Intel firmware variant (%u)", hdev->name, ver->fw_variant); kfree_skb(skb); return -ENODEV; } kfree_skb(skb); /* Read the secure boot parameters to identify the operating * details of the bootloader. */ skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { BT_ERR("%s: Reading Intel boot parameters failed (%ld)", hdev->name, PTR_ERR(skb)); return PTR_ERR(skb); } if (skb->len != sizeof(*params)) { BT_ERR("%s: Intel boot parameters size mismatch", hdev->name); kfree_skb(skb); return -EILSEQ; } params = (struct intel_boot_params *)skb->data; if (params->status) { BT_ERR("%s: Intel boot parameters command failure (%02x)", hdev->name, params->status); err = -bt_to_errno(params->status); kfree_skb(skb); return err; } BT_INFO("%s: Device revision is %u", hdev->name, le16_to_cpu(params->dev_revid)); BT_INFO("%s: Secure boot is %s", hdev->name, params->secure_boot ? "enabled" : "disabled"); BT_INFO("%s: Minimum firmware build %u week %u %u", hdev->name, params->min_fw_build_nn, params->min_fw_build_cw, 2000 + params->min_fw_build_yy); /* It is required that every single firmware fragment is acknowledged * with a command complete event. If the boot parameters indicate * that this bootloader does not send them, then abort the setup. */ if (params->limited_cce != 0x00) { BT_ERR("%s: Unsupported Intel firmware loading method (%u)", hdev->name, params->limited_cce); kfree_skb(skb); return -EINVAL; } /* If the OTP has no valid Bluetooth device address, then there will * also be no valid address for the operational firmware. */ if (!bacmp(¶ms->otp_bdaddr, BDADDR_ANY)) { BT_INFO("%s: No device address configured", hdev->name); set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks); } /* With this Intel bootloader only the hardware variant and device * revision information are used to select the right firmware. * * Currently this bootloader support is limited to hardware variant * iBT 3.0 (LnP/SfP) which is identified by the value 11 (0x0b). */ snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.sfi", le16_to_cpu(params->dev_revid)); err = request_firmware(&fw, fwname, &hdev->dev); if (err < 0) { BT_ERR("%s: Failed to load Intel firmware file (%d)", hdev->name, err); kfree_skb(skb); return err; } BT_INFO("%s: Found device firmware: %s", hdev->name, fwname); kfree_skb(skb); if (fw->size < 644) { BT_ERR("%s: Invalid size of firmware file (%zu)", hdev->name, fw->size); err = -EBADF; goto done; } set_bit(BTUSB_DOWNLOADING, &data->flags); /* Start the firmware download transaction with the Init fragment * represented by the 128 bytes of CSS header. */ err = btusb_intel_secure_send(hdev, 0x00, 128, fw->data); if (err < 0) { BT_ERR("%s: Failed to send firmware header (%d)", hdev->name, err); goto done; } /* Send the 256 bytes of public key information from the firmware * as the PKey fragment. */ err = btusb_intel_secure_send(hdev, 0x03, 256, fw->data + 128); if (err < 0) { BT_ERR("%s: Failed to send firmware public key (%d)", hdev->name, err); goto done; } /* Send the 256 bytes of signature information from the firmware * as the Sign fragment. */ err = btusb_intel_secure_send(hdev, 0x02, 256, fw->data + 388); if (err < 0) { BT_ERR("%s: Failed to send firmware signature (%d)", hdev->name, err); goto done; } fw_ptr = fw->data + 644; while (fw_ptr - fw->data < fw->size) { struct hci_command_hdr *cmd = (void *)fw_ptr; u8 cmd_len; cmd_len = sizeof(*cmd) + cmd->plen; /* Send each command from the firmware data buffer as * a single Data fragment. */ err = btusb_intel_secure_send(hdev, 0x01, cmd_len, fw_ptr); if (err < 0) { BT_ERR("%s: Failed to send firmware data (%d)", hdev->name, err); goto done; } fw_ptr += cmd_len; } set_bit(BTUSB_FIRMWARE_LOADED, &data->flags); BT_INFO("%s: Waiting for firmware download to complete", hdev->name); /* Before switching the device into operational mode and with that * booting the loaded firmware, wait for the bootloader notification * that all fragments have been successfully received. * * When the event processing receives the notification, then the * BTUSB_DOWNLOADING flag will be cleared. * * The firmware loading should not take longer than 5 seconds * and thus just timeout if that happens and fail the setup * of this device. */ err = wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING, TASK_INTERRUPTIBLE, msecs_to_jiffies(5000)); if (err == 1) { BT_ERR("%s: Firmware loading interrupted", hdev->name); err = -EINTR; goto done; } if (err) { BT_ERR("%s: Firmware loading timeout", hdev->name); err = -ETIMEDOUT; goto done; } if (test_bit(BTUSB_FIRMWARE_FAILED, &data->flags)) { BT_ERR("%s: Firmware loading failed", hdev->name); err = -ENOEXEC; goto done; } rettime = ktime_get(); delta = ktime_sub(rettime, calltime); duration = (unsigned long long) ktime_to_ns(delta) >> 10; BT_INFO("%s: Firmware loaded in %llu usecs", hdev->name, duration); done: release_firmware(fw); if (err < 0) return err; calltime = ktime_get(); set_bit(BTUSB_BOOTING, &data->flags); skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(reset_param), reset_param, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) return PTR_ERR(skb); kfree_skb(skb); /* The bootloader will not indicate when the device is ready. This * is done by the operational firmware sending bootup notification. * * Booting into operational firmware should not take longer than * 1 second. However if that happens, then just fail the setup * since something went wrong. */ BT_INFO("%s: Waiting for device to boot", hdev->name); err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING, TASK_INTERRUPTIBLE, msecs_to_jiffies(1000)); if (err == 1) { BT_ERR("%s: Device boot interrupted", hdev->name); return -EINTR; } if (err) { BT_ERR("%s: Device boot timeout", hdev->name); return -ETIMEDOUT; } rettime = ktime_get(); delta = ktime_sub(rettime, calltime); duration = (unsigned long long) ktime_to_ns(delta) >> 10; BT_INFO("%s: Device booted in %llu usecs", hdev->name, duration); clear_bit(BTUSB_BOOTLOADER, &data->flags); return 0; } static void btusb_hw_error_intel(struct hci_dev *hdev, u8 code) { struct sk_buff *skb; u8 type = 0x00; BT_ERR("%s: Hardware error 0x%2.2x", hdev->name, code); skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { BT_ERR("%s: Reset after hardware error failed (%ld)", hdev->name, PTR_ERR(skb)); return; } kfree_skb(skb); skb = __hci_cmd_sync(hdev, 0xfc22, 1, &type, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { BT_ERR("%s: Retrieving Intel exception info failed (%ld)", hdev->name, PTR_ERR(skb)); return; } if (skb->len != 13) { BT_ERR("%s: Exception info size mismatch", hdev->name); kfree_skb(skb); return; } if (skb->data[0] != 0x00) { BT_ERR("%s: Exception info command failure (%02x)", hdev->name, skb->data[0]); kfree_skb(skb); return; } BT_ERR("%s: Exception info %s", hdev->name, (char *)(skb->data + 1)); kfree_skb(skb); } static int btusb_set_bdaddr_intel(struct hci_dev *hdev, const bdaddr_t *bdaddr) { struct sk_buff *skb; long ret; skb = __hci_cmd_sync(hdev, 0xfc31, 6, bdaddr, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { ret = PTR_ERR(skb); BT_ERR("%s: changing Intel device address failed (%ld)", hdev->name, ret); return ret; } kfree_skb(skb); return 0; } static int btusb_shutdown_intel(struct hci_dev *hdev) { struct sk_buff *skb; long ret; /* Some platforms have an issue with BT LED when the interface is * down or BT radio is turned off, which takes 5 seconds to BT LED * goes off. This command turns off the BT LED immediately. */ skb = __hci_cmd_sync(hdev, 0xfc3f, 0, NULL, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { ret = PTR_ERR(skb); BT_ERR("%s: turning off Intel device LED failed (%ld)", hdev->name, ret); return ret; } kfree_skb(skb); return 0; } static int btusb_set_bdaddr_marvell(struct hci_dev *hdev, const bdaddr_t *bdaddr) { struct sk_buff *skb; u8 buf[8]; long ret; buf[0] = 0xfe; buf[1] = sizeof(bdaddr_t); memcpy(buf + 2, bdaddr, sizeof(bdaddr_t)); skb = __hci_cmd_sync(hdev, 0xfc22, sizeof(buf), buf, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { ret = PTR_ERR(skb); BT_ERR("%s: changing Marvell device address failed (%ld)", hdev->name, ret); return ret; } kfree_skb(skb); return 0; } static const struct { u16 subver; const char *name; } bcm_subver_table[] = { { 0x210b, "BCM43142A0" }, /* 001.001.011 */ { 0x2112, "BCM4314A0" }, /* 001.001.018 */ { 0x2118, "BCM20702A0" }, /* 001.001.024 */ { 0x2126, "BCM4335A0" }, /* 001.001.038 */ { 0x220e, "BCM20702A1" }, /* 001.002.014 */ { 0x230f, "BCM4354A2" }, /* 001.003.015 */ { 0x4106, "BCM4335B0" }, /* 002.001.006 */ { 0x410e, "BCM20702B0" }, /* 002.001.014 */ { 0x6109, "BCM4335C0" }, /* 003.001.009 */ { 0x610c, "BCM4354" }, /* 003.001.012 */ { } }; #define BDADDR_BCM20702A0 (&(bdaddr_t) {{0x00, 0xa0, 0x02, 0x70, 0x20, 0x00}}) static int btusb_setup_bcm_patchram(struct hci_dev *hdev) { struct btusb_data *data = hci_get_drvdata(hdev); struct usb_device *udev = data->udev; char fw_name[64]; const struct firmware *fw; const u8 *fw_ptr; size_t fw_size; const struct hci_command_hdr *cmd; const u8 *cmd_param; u16 opcode, subver, rev; const char *hw_name = NULL; struct sk_buff *skb; struct hci_rp_read_local_version *ver; struct hci_rp_read_bd_addr *bda; long ret; int i; /* Reset */ skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { ret = PTR_ERR(skb); BT_ERR("%s: HCI_OP_RESET failed (%ld)", hdev->name, ret); return ret; } kfree_skb(skb); /* Read Local Version Info */ skb = btusb_read_local_version(hdev); if (IS_ERR(skb)) return PTR_ERR(skb); ver = (struct hci_rp_read_local_version *)skb->data; rev = le16_to_cpu(ver->hci_rev); subver = le16_to_cpu(ver->lmp_subver); kfree_skb(skb); for (i = 0; bcm_subver_table[i].name; i++) { if (subver == bcm_subver_table[i].subver) { hw_name = bcm_subver_table[i].name; break; } } BT_INFO("%s: %s (%3.3u.%3.3u.%3.3u) build %4.4u", hdev->name, hw_name ? : "BCM", (subver & 0x7000) >> 13, (subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff); snprintf(fw_name, sizeof(fw_name), "brcm/%s-%4.4x-%4.4x.hcd", hw_name ? : "BCM", le16_to_cpu(udev->descriptor.idVendor), le16_to_cpu(udev->descriptor.idProduct)); ret = request_firmware(&fw, fw_name, &hdev->dev); if (ret < 0) { BT_INFO("%s: BCM: patch %s not found", hdev->name, fw_name); return 0; } /* Start Download */ skb = __hci_cmd_sync(hdev, 0xfc2e, 0, NULL, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { ret = PTR_ERR(skb); BT_ERR("%s: BCM: Download Minidrv command failed (%ld)", hdev->name, ret); goto reset_fw; } kfree_skb(skb); /* 50 msec delay after Download Minidrv completes */ msleep(50); fw_ptr = fw->data; fw_size = fw->size; while (fw_size >= sizeof(*cmd)) { cmd = (struct hci_command_hdr *)fw_ptr; fw_ptr += sizeof(*cmd); fw_size -= sizeof(*cmd); if (fw_size < cmd->plen) { BT_ERR("%s: BCM: patch %s is corrupted", hdev->name, fw_name); ret = -EINVAL; goto reset_fw; } cmd_param = fw_ptr; fw_ptr += cmd->plen; fw_size -= cmd->plen; opcode = le16_to_cpu(cmd->opcode); skb = __hci_cmd_sync(hdev, opcode, cmd->plen, cmd_param, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { ret = PTR_ERR(skb); BT_ERR("%s: BCM: patch command %04x failed (%ld)", hdev->name, opcode, ret); goto reset_fw; } kfree_skb(skb); } /* 250 msec delay after Launch Ram completes */ msleep(250); reset_fw: /* Reset */ skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { ret = PTR_ERR(skb); BT_ERR("%s: HCI_OP_RESET failed (%ld)", hdev->name, ret); goto done; } kfree_skb(skb); /* Read Local Version Info */ skb = btusb_read_local_version(hdev); if (IS_ERR(skb)) { ret = PTR_ERR(skb); goto done; } ver = (struct hci_rp_read_local_version *)skb->data; rev = le16_to_cpu(ver->hci_rev); subver = le16_to_cpu(ver->lmp_subver); kfree_skb(skb); BT_INFO("%s: %s (%3.3u.%3.3u.%3.3u) build %4.4u", hdev->name, hw_name ? : "BCM", (subver & 0x7000) >> 13, (subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff); /* Read BD Address */ skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { ret = PTR_ERR(skb); BT_ERR("%s: HCI_OP_READ_BD_ADDR failed (%ld)", hdev->name, ret); goto done; } if (skb->len != sizeof(*bda)) { BT_ERR("%s: HCI_OP_READ_BD_ADDR event length mismatch", hdev->name); kfree_skb(skb); ret = -EIO; goto done; } bda = (struct hci_rp_read_bd_addr *)skb->data; if (bda->status) { BT_ERR("%s: HCI_OP_READ_BD_ADDR error status (%02x)", hdev->name, bda->status); kfree_skb(skb); ret = -bt_to_errno(bda->status); goto done; } /* The address 00:20:70:02:A0:00 indicates a BCM20702A0 controller * with no configured address. */ if (!bacmp(&bda->bdaddr, BDADDR_BCM20702A0)) { BT_INFO("%s: BCM: using default device address (%pMR)", hdev->name, &bda->bdaddr); set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks); } kfree_skb(skb); done: release_firmware(fw); return ret; } static int btusb_set_bdaddr_bcm(struct hci_dev *hdev, const bdaddr_t *bdaddr) { struct sk_buff *skb; long ret; skb = __hci_cmd_sync(hdev, 0xfc01, 6, bdaddr, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { ret = PTR_ERR(skb); BT_ERR("%s: BCM: Change address command failed (%ld)", hdev->name, ret); return ret; } kfree_skb(skb); return 0; } static int btusb_set_bdaddr_ath3012(struct hci_dev *hdev, const bdaddr_t *bdaddr) { struct sk_buff *skb; u8 buf[10]; long ret; buf[0] = 0x01; buf[1] = 0x01; buf[2] = 0x00; buf[3] = sizeof(bdaddr_t); memcpy(buf + 4, bdaddr, sizeof(bdaddr_t)); skb = __hci_cmd_sync(hdev, 0xfc0b, sizeof(buf), buf, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { ret = PTR_ERR(skb); BT_ERR("%s: Change address command failed (%ld)", hdev->name, ret); return ret; } kfree_skb(skb); return 0; } #define QCA_DFU_PACKET_LEN 4096 #define QCA_GET_TARGET_VERSION 0x09 #define QCA_CHECK_STATUS 0x05 #define QCA_DFU_DOWNLOAD 0x01 #define QCA_SYSCFG_UPDATED 0x40 #define QCA_PATCH_UPDATED 0x80 #define QCA_DFU_TIMEOUT 3000 struct qca_version { __le32 rom_version; __le32 patch_version; __le32 ram_version; __le32 ref_clock; __u8 reserved[4]; } __packed; struct qca_rampatch_version { __le16 rom_version; __le16 patch_version; } __packed; struct qca_device_info { u32 rom_version; u8 rampatch_hdr; /* length of header in rampatch */ u8 nvm_hdr; /* length of header in NVM */ u8 ver_offset; /* offset of version structure in rampatch */ }; static const struct qca_device_info qca_devices_table[] = { { 0x00000100, 20, 4, 10 }, /* Rome 1.0 */ { 0x00000101, 20, 4, 10 }, /* Rome 1.1 */ { 0x00000201, 28, 4, 18 }, /* Rome 2.1 */ { 0x00000300, 28, 4, 18 }, /* Rome 3.0 */ { 0x00000302, 28, 4, 18 }, /* Rome 3.2 */ }; static int btusb_qca_send_vendor_req(struct hci_dev *hdev, u8 request, void *data, u16 size) { struct btusb_data *btdata = hci_get_drvdata(hdev); struct usb_device *udev = btdata->udev; int pipe, err; u8 *buf; buf = kmalloc(size, GFP_KERNEL); if (!buf) return -ENOMEM; /* Found some of USB hosts have IOT issues with ours so that we should * not wait until HCI layer is ready. */ pipe = usb_rcvctrlpipe(udev, 0); err = usb_control_msg(udev, pipe, request, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, buf, size, USB_CTRL_SET_TIMEOUT); if (err < 0) { BT_ERR("%s: Failed to access otp area (%d)", hdev->name, err); goto done; } memcpy(data, buf, size); done: kfree(buf); return err; } static int btusb_setup_qca_download_fw(struct hci_dev *hdev, const struct firmware *firmware, size_t hdr_size) { struct btusb_data *btdata = hci_get_drvdata(hdev); struct usb_device *udev = btdata->udev; size_t count, size, sent = 0; int pipe, len, err; u8 *buf; buf = kmalloc(QCA_DFU_PACKET_LEN, GFP_KERNEL); if (!buf) return -ENOMEM; count = firmware->size; size = min_t(size_t, count, hdr_size); memcpy(buf, firmware->data, size); /* USB patches should go down to controller through USB path * because binary format fits to go down through USB channel. * USB control path is for patching headers and USB bulk is for * patch body. */ pipe = usb_sndctrlpipe(udev, 0); err = usb_control_msg(udev, pipe, QCA_DFU_DOWNLOAD, USB_TYPE_VENDOR, 0, 0, buf, size, USB_CTRL_SET_TIMEOUT); if (err < 0) { BT_ERR("%s: Failed to send headers (%d)", hdev->name, err); goto done; } sent += size; count -= size; while (count) { size = min_t(size_t, count, QCA_DFU_PACKET_LEN); memcpy(buf, firmware->data + sent, size); pipe = usb_sndbulkpipe(udev, 0x02); err = usb_bulk_msg(udev, pipe, buf, size, &len, QCA_DFU_TIMEOUT); if (err < 0) { BT_ERR("%s: Failed to send body at %zd of %zd (%d)", hdev->name, sent, firmware->size, err); break; } if (size != len) { BT_ERR("%s: Failed to get bulk buffer", hdev->name); err = -EILSEQ; break; } sent += size; count -= size; } done: kfree(buf); return err; } static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev, struct qca_version *ver, const struct qca_device_info *info) { struct qca_rampatch_version *rver; const struct firmware *fw; u32 ver_rom, ver_patch; u16 rver_rom, rver_patch; char fwname[64]; int err; ver_rom = le32_to_cpu(ver->rom_version); ver_patch = le32_to_cpu(ver->patch_version); snprintf(fwname, sizeof(fwname), "qca/rampatch_usb_%08x.bin", ver_rom); err = request_firmware(&fw, fwname, &hdev->dev); if (err) { BT_ERR("%s: failed to request rampatch file: %s (%d)", hdev->name, fwname, err); return err; } BT_INFO("%s: using rampatch file: %s", hdev->name, fwname); rver = (struct qca_rampatch_version *)(fw->data + info->ver_offset); rver_rom = le16_to_cpu(rver->rom_version); rver_patch = le16_to_cpu(rver->patch_version); BT_INFO("%s: QCA: patch rome 0x%x build 0x%x, firmware rome 0x%x " "build 0x%x", hdev->name, rver_rom, rver_patch, ver_rom, ver_patch); if (rver_rom != ver_rom || rver_patch <= ver_patch) { BT_ERR("%s: rampatch file version did not match with firmware", hdev->name); err = -EINVAL; goto done; } err = btusb_setup_qca_download_fw(hdev, fw, info->rampatch_hdr); done: release_firmware(fw); return err; } static int btusb_setup_qca_load_nvm(struct hci_dev *hdev, struct qca_version *ver, const struct qca_device_info *info) { const struct firmware *fw; char fwname[64]; int err; snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin", le32_to_cpu(ver->rom_version)); err = request_firmware(&fw, fwname, &hdev->dev); if (err) { BT_ERR("%s: failed to request NVM file: %s (%d)", hdev->name, fwname, err); return err; } BT_INFO("%s: using NVM file: %s", hdev->name, fwname); err = btusb_setup_qca_download_fw(hdev, fw, info->nvm_hdr); release_firmware(fw); return err; } static int btusb_setup_qca(struct hci_dev *hdev) { const struct qca_device_info *info = NULL; struct qca_version ver; u32 ver_rom; u8 status; int i, err; err = btusb_qca_send_vendor_req(hdev, QCA_GET_TARGET_VERSION, &ver, sizeof(ver)); if (err < 0) return err; ver_rom = le32_to_cpu(ver.rom_version); for (i = 0; i < ARRAY_SIZE(qca_devices_table); i++) { if (ver_rom == qca_devices_table[i].rom_version) info = &qca_devices_table[i]; } if (!info) { BT_ERR("%s: don't support firmware rome 0x%x", hdev->name, ver_rom); return -ENODEV; } err = btusb_qca_send_vendor_req(hdev, QCA_CHECK_STATUS, &status, sizeof(status)); if (err < 0) return err; if (!(status & QCA_PATCH_UPDATED)) { err = btusb_setup_qca_load_rampatch(hdev, &ver, info); if (err < 0) return err; } if (!(status & QCA_SYSCFG_UPDATED)) { err = btusb_setup_qca_load_nvm(hdev, &ver, info); if (err < 0) return err; } return 0; } static int btusb_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_endpoint_descriptor *ep_desc; struct btusb_data *data; struct hci_dev *hdev; int i, err; BT_DBG("intf %p id %p", intf, id); /* interface numbers are hardcoded in the spec */ if (intf->cur_altsetting->desc.bInterfaceNumber != 0) return -ENODEV; if (!id->driver_info) { const struct usb_device_id *match; match = usb_match_id(intf, blacklist_table); if (match) id = match; } if (id->driver_info == BTUSB_IGNORE) return -ENODEV; if (id->driver_info & BTUSB_ATH3012) { struct usb_device *udev = interface_to_usbdev(intf); /* Old firmware would otherwise let ath3k driver load * patch and sysconfig files */ if (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x0001) return -ENODEV; } data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) { ep_desc = &intf->cur_altsetting->endpoint[i].desc; if (!data->intr_ep && usb_endpoint_is_int_in(ep_desc)) { data->intr_ep = ep_desc; continue; } if (!data->bulk_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) { data->bulk_tx_ep = ep_desc; continue; } if (!data->bulk_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) { data->bulk_rx_ep = ep_desc; continue; } } if (!data->intr_ep || !data->bulk_tx_ep || !data->bulk_rx_ep) return -ENODEV; if (id->driver_info & BTUSB_AMP) { data->cmdreq_type = USB_TYPE_CLASS | 0x01; data->cmdreq = 0x2b; } else { data->cmdreq_type = USB_TYPE_CLASS; data->cmdreq = 0x00; } data->udev = interface_to_usbdev(intf); data->intf = intf; INIT_WORK(&data->work, btusb_work); INIT_WORK(&data->waker, btusb_waker); init_usb_anchor(&data->deferred); init_usb_anchor(&data->tx_anchor); spin_lock_init(&data->txlock); init_usb_anchor(&data->intr_anchor); init_usb_anchor(&data->bulk_anchor); init_usb_anchor(&data->isoc_anchor); spin_lock_init(&data->rxlock); if (id->driver_info & BTUSB_INTEL_NEW) { data->recv_event = btusb_recv_event_intel; data->recv_bulk = btusb_recv_bulk_intel; set_bit(BTUSB_BOOTLOADER, &data->flags); } else { data->recv_event = hci_recv_frame; data->recv_bulk = btusb_recv_bulk; } hdev = hci_alloc_dev(); if (!hdev) return -ENOMEM; hdev->bus = HCI_USB; hci_set_drvdata(hdev, data); if (id->driver_info & BTUSB_AMP) hdev->dev_type = HCI_AMP; else hdev->dev_type = HCI_BREDR; data->hdev = hdev; SET_HCIDEV_DEV(hdev, &intf->dev); hdev->open = btusb_open; hdev->close = btusb_close; hdev->flush = btusb_flush; hdev->send = btusb_send_frame; hdev->notify = btusb_notify; if (id->driver_info & BTUSB_BCM92035) hdev->setup = btusb_setup_bcm92035; if (id->driver_info & BTUSB_BCM_PATCHRAM) { hdev->setup = btusb_setup_bcm_patchram; hdev->set_bdaddr = btusb_set_bdaddr_bcm; set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); } if (id->driver_info & BTUSB_INTEL) { hdev->setup = btusb_setup_intel; hdev->shutdown = btusb_shutdown_intel; hdev->set_bdaddr = btusb_set_bdaddr_intel; set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); } if (id->driver_info & BTUSB_INTEL_NEW) { hdev->send = btusb_send_frame_intel; hdev->setup = btusb_setup_intel_new; hdev->hw_error = btusb_hw_error_intel; hdev->set_bdaddr = btusb_set_bdaddr_intel; set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); } if (id->driver_info & BTUSB_MARVELL) hdev->set_bdaddr = btusb_set_bdaddr_marvell; if (id->driver_info & BTUSB_SWAVE) { set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks); set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks); } if (id->driver_info & BTUSB_INTEL_BOOT) set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks); if (id->driver_info & BTUSB_ATH3012) { hdev->set_bdaddr = btusb_set_bdaddr_ath3012; set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); } if (id->driver_info & BTUSB_QCA_ROME) { data->setup_on_usb = btusb_setup_qca; hdev->set_bdaddr = btusb_set_bdaddr_ath3012; } if (id->driver_info & BTUSB_AMP) { /* AMP controllers do not support SCO packets */ data->isoc = NULL; } else { /* Interface numbers are hardcoded in the specification */ data->isoc = usb_ifnum_to_if(data->udev, 1); } if (!reset) set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); if (force_scofix || id->driver_info & BTUSB_WRONG_SCO_MTU) { if (!disable_scofix) set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks); } if (id->driver_info & BTUSB_BROKEN_ISOC) data->isoc = NULL; if (id->driver_info & BTUSB_DIGIANSWER) { data->cmdreq_type = USB_TYPE_VENDOR; set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); } if (id->driver_info & BTUSB_CSR) { struct usb_device *udev = data->udev; u16 bcdDevice = le16_to_cpu(udev->descriptor.bcdDevice); /* Old firmware would otherwise execute USB reset */ if (bcdDevice < 0x117) set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); /* Fake CSR devices with broken commands */ if (bcdDevice <= 0x100) hdev->setup = btusb_setup_csr; set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); } if (id->driver_info & BTUSB_SNIFFER) { struct usb_device *udev = data->udev; /* New sniffer firmware has crippled HCI interface */ if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997) set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks); } if (id->driver_info & BTUSB_INTEL_BOOT) { /* A bug in the bootloader causes that interrupt interface is * only enabled after receiving SetInterface(0, AltSetting=0). */ err = usb_set_interface(data->udev, 0, 0); if (err < 0) { BT_ERR("failed to set interface 0, alt 0 %d", err); hci_free_dev(hdev); return err; } } if (data->isoc) { err = usb_driver_claim_interface(&btusb_driver, data->isoc, data); if (err < 0) { hci_free_dev(hdev); return err; } } err = hci_register_dev(hdev); if (err < 0) { hci_free_dev(hdev); return err; } usb_set_intfdata(intf, data); return 0; } static void btusb_disconnect(struct usb_interface *intf) { struct btusb_data *data = usb_get_intfdata(intf); struct hci_dev *hdev; BT_DBG("intf %p", intf); if (!data) return; hdev = data->hdev; usb_set_intfdata(data->intf, NULL); if (data->isoc) usb_set_intfdata(data->isoc, NULL); hci_unregister_dev(hdev); if (intf == data->isoc) usb_driver_release_interface(&btusb_driver, data->intf); else if (data->isoc) usb_driver_release_interface(&btusb_driver, data->isoc); hci_free_dev(hdev); } #ifdef CONFIG_PM static int btusb_suspend(struct usb_interface *intf, pm_message_t message) { struct btusb_data *data = usb_get_intfdata(intf); BT_DBG("intf %p", intf); if (data->suspend_count++) return 0; spin_lock_irq(&data->txlock); if (!(PMSG_IS_AUTO(message) && data->tx_in_flight)) { set_bit(BTUSB_SUSPENDING, &data->flags); spin_unlock_irq(&data->txlock); } else { spin_unlock_irq(&data->txlock); data->suspend_count--; return -EBUSY; } cancel_work_sync(&data->work); btusb_stop_traffic(data); usb_kill_anchored_urbs(&data->tx_anchor); return 0; } static void play_deferred(struct btusb_data *data) { struct urb *urb; int err; while ((urb = usb_get_from_anchor(&data->deferred))) { err = usb_submit_urb(urb, GFP_ATOMIC); if (err < 0) break; data->tx_in_flight++; } usb_scuttle_anchored_urbs(&data->deferred); } static int btusb_resume(struct usb_interface *intf) { struct btusb_data *data = usb_get_intfdata(intf); struct hci_dev *hdev = data->hdev; int err = 0; BT_DBG("intf %p", intf); if (--data->suspend_count) return 0; if (!test_bit(HCI_RUNNING, &hdev->flags)) goto done; if (test_bit(BTUSB_INTR_RUNNING, &data->flags)) { err = btusb_submit_intr_urb(hdev, GFP_NOIO); if (err < 0) { clear_bit(BTUSB_INTR_RUNNING, &data->flags); goto failed; } } if (test_bit(BTUSB_BULK_RUNNING, &data->flags)) { err = btusb_submit_bulk_urb(hdev, GFP_NOIO); if (err < 0) { clear_bit(BTUSB_BULK_RUNNING, &data->flags); goto failed; } btusb_submit_bulk_urb(hdev, GFP_NOIO); } if (test_bit(BTUSB_ISOC_RUNNING, &data->flags)) { if (btusb_submit_isoc_urb(hdev, GFP_NOIO) < 0) clear_bit(BTUSB_ISOC_RUNNING, &data->flags); else btusb_submit_isoc_urb(hdev, GFP_NOIO); } spin_lock_irq(&data->txlock); play_deferred(data); clear_bit(BTUSB_SUSPENDING, &data->flags); spin_unlock_irq(&data->txlock); schedule_work(&data->work); return 0; failed: usb_scuttle_anchored_urbs(&data->deferred); done: spin_lock_irq(&data->txlock); clear_bit(BTUSB_SUSPENDING, &data->flags); spin_unlock_irq(&data->txlock); return err; } #endif static struct usb_driver btusb_driver = { .name = "btusb", .probe = btusb_probe, .disconnect = btusb_disconnect, #ifdef CONFIG_PM .suspend = btusb_suspend, .resume = btusb_resume, #endif .id_table = btusb_table, .supports_autosuspend = 1, .disable_hub_initiated_lpm = 1, }; module_usb_driver(btusb_driver); module_param(disable_scofix, bool, 0644); MODULE_PARM_DESC(disable_scofix, "Disable fixup of wrong SCO buffer size"); module_param(force_scofix, bool, 0644); MODULE_PARM_DESC(force_scofix, "Force fixup of wrong SCO buffers size"); module_param(reset, bool, 0644); MODULE_PARM_DESC(reset, "Send HCI reset command on initialization"); MODULE_AUTHOR("Marcel Holtmann "); MODULE_DESCRIPTION("Generic Bluetooth USB driver ver " VERSION); MODULE_VERSION(VERSION); MODULE_LICENSE("GPL");