From f3e25e68ceb2abaeefcac8f930c940c4494705d0 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Tue, 14 Nov 2023 12:20:11 +0100 Subject: pwm: Drop unused member "pwm" from struct pwm_device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This member is only assigned to and never read. So drop it. Signed-off-by: Uwe Kleine-König Signed-off-by: Thierry Reding --- include/linux/pwm.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/pwm.h b/include/linux/pwm.h index cda3597b84f2..8cadf9ee8d26 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -79,7 +79,6 @@ struct pwm_device { const char *label; unsigned long flags; unsigned int hwpwm; - unsigned int pwm; struct pwm_chip *chip; struct pwm_args args; -- cgit v1.2.3 From 54c86dd20bba23109e32e4e2f94ff93dd9863bc3 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Tue, 14 Nov 2023 12:20:12 +0100 Subject: pwm: Replace PWM chip unique base by unique ID MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Traditionally each PWM device had a unique ID stored in the "pwm" member of struct pwm_device. However this number was hardly used and dropped in the previous commit. To identify a certain PWM you're supposed to use the chip's ID and the hwpwm of the PWM device now. With the PWM chip base gone PWM chips can get their IDs better and simpler using an idr. This is expected to change the numbering of PWM chips, but nothing should rely on the numbering anyhow. Other than that the side effects are: - The PWM chip IDs are smaller and in most cases consecutive. - The ordering in /sys/kernel/debug/pwm is ordered by ascending PWM chip ID. Signed-off-by: Uwe Kleine-König Signed-off-by: Thierry Reding --- drivers/pwm/core.c | 67 ++++++++++++++++++++--------------------------------- drivers/pwm/sysfs.c | 2 +- include/linux/pwm.h | 3 +-- 3 files changed, 27 insertions(+), 45 deletions(-) (limited to 'include') diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c index 24bb796d15f6..ebe404dfdf5b 100644 --- a/drivers/pwm/core.c +++ b/drivers/pwm/core.c @@ -8,6 +8,7 @@ #include #include +#include #include #include #include @@ -23,52 +24,25 @@ #define CREATE_TRACE_POINTS #include -#define MAX_PWMS 1024 - static DEFINE_MUTEX(pwm_lookup_lock); static LIST_HEAD(pwm_lookup_list); -/* protects access to pwm_chips and allocated_pwms */ +/* protects access to pwm_chips */ static DEFINE_MUTEX(pwm_lock); -static LIST_HEAD(pwm_chips); -static DECLARE_BITMAP(allocated_pwms, MAX_PWMS); - -/* Called with pwm_lock held */ -static int alloc_pwms(unsigned int count) -{ - unsigned int start; - - start = bitmap_find_next_zero_area(allocated_pwms, MAX_PWMS, 0, - count, 0); - - if (start + count > MAX_PWMS) - return -ENOSPC; - - bitmap_set(allocated_pwms, start, count); - - return start; -} - -/* Called with pwm_lock held */ -static void free_pwms(struct pwm_chip *chip) -{ - bitmap_clear(allocated_pwms, chip->base, chip->npwm); - - kfree(chip->pwms); - chip->pwms = NULL; -} +static DEFINE_IDR(pwm_chips); static struct pwm_chip *pwmchip_find_by_name(const char *name) { struct pwm_chip *chip; + unsigned long id, tmp; if (!name) return NULL; mutex_lock(&pwm_lock); - list_for_each_entry(chip, &pwm_chips, list) { + idr_for_each_entry_ul(&pwm_chips, chip, tmp, id) { const char *chip_name = dev_name(chip->dev); if (chip_name && strcmp(chip_name, name) == 0) { @@ -252,14 +226,14 @@ int __pwmchip_add(struct pwm_chip *chip, struct module *owner) mutex_lock(&pwm_lock); - ret = alloc_pwms(chip->npwm); + ret = idr_alloc(&pwm_chips, chip, 0, 0, GFP_KERNEL); if (ret < 0) { mutex_unlock(&pwm_lock); kfree(chip->pwms); return ret; } - chip->base = ret; + chip->id = ret; for (i = 0; i < chip->npwm; i++) { pwm = &chip->pwms[i]; @@ -268,8 +242,6 @@ int __pwmchip_add(struct pwm_chip *chip, struct module *owner) pwm->hwpwm = i; } - list_add(&chip->list, &pwm_chips); - mutex_unlock(&pwm_lock); if (IS_ENABLED(CONFIG_OF)) @@ -296,11 +268,11 @@ void pwmchip_remove(struct pwm_chip *chip) mutex_lock(&pwm_lock); - list_del_init(&chip->list); - - free_pwms(chip); + idr_remove(&pwm_chips, chip->id); mutex_unlock(&pwm_lock); + + kfree(chip->pwms); } EXPORT_SYMBOL_GPL(pwmchip_remove); @@ -596,10 +568,11 @@ EXPORT_SYMBOL_GPL(pwm_adjust_config); static struct pwm_chip *fwnode_to_pwmchip(struct fwnode_handle *fwnode) { struct pwm_chip *chip; + unsigned long id, tmp; mutex_lock(&pwm_lock); - list_for_each_entry(chip, &pwm_chips, list) + idr_for_each_entry_ul(&pwm_chips, chip, tmp, id) if (chip->dev && device_match_fwnode(chip->dev, fwnode)) { mutex_unlock(&pwm_lock); return chip; @@ -1057,17 +1030,27 @@ static void pwm_dbg_show(struct pwm_chip *chip, struct seq_file *s) static void *pwm_seq_start(struct seq_file *s, loff_t *pos) { + unsigned long id = *pos; + void *ret; + mutex_lock(&pwm_lock); s->private = ""; - return seq_list_start(&pwm_chips, *pos); + ret = idr_get_next_ul(&pwm_chips, &id); + *pos = id; + return ret; } static void *pwm_seq_next(struct seq_file *s, void *v, loff_t *pos) { + unsigned long id = *pos + 1; + void *ret; + s->private = "\n"; - return seq_list_next(v, &pwm_chips, pos); + ret = idr_get_next_ul(&pwm_chips, &id); + *pos = id; + return ret; } static void pwm_seq_stop(struct seq_file *s, void *v) @@ -1077,7 +1060,7 @@ static void pwm_seq_stop(struct seq_file *s, void *v) static int pwm_seq_show(struct seq_file *s, void *v) { - struct pwm_chip *chip = list_entry(v, struct pwm_chip, list); + struct pwm_chip *chip = v; seq_printf(s, "%s%s/%s, %d PWM device%s\n", (char *)s->private, chip->dev->bus ? chip->dev->bus->name : "no-bus", diff --git a/drivers/pwm/sysfs.c b/drivers/pwm/sysfs.c index 8d1254761e4d..4edb994fa2e1 100644 --- a/drivers/pwm/sysfs.c +++ b/drivers/pwm/sysfs.c @@ -510,7 +510,7 @@ void pwmchip_sysfs_export(struct pwm_chip *chip) * the kernel it's just not exported. */ parent = device_create(&pwm_class, chip->dev, MKDEV(0, 0), chip, - "pwmchip%d", chip->base); + "pwmchip%d", chip->id); if (IS_ERR(parent)) { dev_warn(chip->dev, "device_create failed for pwm_chip sysfs export\n"); diff --git a/include/linux/pwm.h b/include/linux/pwm.h index 8cadf9ee8d26..c27a4bb76012 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -292,7 +292,7 @@ struct pwm_chip { struct device *dev; const struct pwm_ops *ops; struct module *owner; - int base; + unsigned int id; unsigned int npwm; struct pwm_device * (*of_xlate)(struct pwm_chip *chip, @@ -300,7 +300,6 @@ struct pwm_chip { unsigned int of_pwm_n_cells; /* only used internally by the PWM framework */ - struct list_head list; struct pwm_device *pwms; }; -- cgit v1.2.3 From 2d91123ae5614b8737abd3a519b81265309a1ac3 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 29 Nov 2023 11:18:32 +0100 Subject: pwm: Update kernel doc for struct pwm_chip MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit c572f3b9c8b7 ("pwm: Replace PWM chip unique base by unique ID") changed the members of struct pwm_chip, but failed to update the documentation accordingly. Catch up and document the new member and drop description for the two removed ones. Reported-by: Stephen Rothwell Signed-off-by: Uwe Kleine-König Signed-off-by: Thierry Reding --- include/linux/pwm.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/pwm.h b/include/linux/pwm.h index c27a4bb76012..f87655c06c82 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -281,11 +281,10 @@ struct pwm_ops { * @dev: device providing the PWMs * @ops: callbacks for this PWM controller * @owner: module providing this chip - * @base: number of first PWM controlled by this chip + * @id: unique number of this PWM chip * @npwm: number of PWMs controlled by this chip * @of_xlate: request a PWM device given a device tree PWM specifier * @of_pwm_n_cells: number of cells expected in the device tree PWM specifier - * @list: list node for internal use * @pwms: array of PWM devices allocated by the framework */ struct pwm_chip { -- cgit v1.2.3 From c748a6d77c06a78651030e17da6beb278a1c9470 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Tue, 19 Dec 2023 16:30:24 +0000 Subject: pwm: Rename pwm_apply_state() to pwm_apply_might_sleep() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In order to introduce a pwm api which can be used from atomic context, we will need two functions for applying pwm changes: int pwm_apply_might_sleep(struct pwm *, struct pwm_state *); int pwm_apply_atomic(struct pwm *, struct pwm_state *); This commit just deals with renaming pwm_apply_state(), a following commit will introduce the pwm_apply_atomic() function. Acked-by: Uwe Kleine-König Acked-by: Guenter Roeck Acked-by: Mark Brown Acked-by: Dmitry Torokhov # for input Acked-by: Hans de Goede Acked-by: Jani Nikula Acked-by: Lee Jones Signed-off-by: Sean Young Signed-off-by: Thierry Reding --- Documentation/driver-api/pwm.rst | 8 ++++---- MAINTAINERS | 2 +- drivers/gpu/drm/i915/display/intel_backlight.c | 6 +++--- drivers/gpu/drm/solomon/ssd130x.c | 2 +- drivers/hwmon/pwm-fan.c | 8 ++++---- drivers/input/misc/da7280.c | 4 ++-- drivers/input/misc/pwm-beeper.c | 4 ++-- drivers/input/misc/pwm-vibra.c | 8 ++++---- drivers/leds/leds-pwm.c | 2 +- drivers/leds/rgb/leds-pwm-multicolor.c | 4 ++-- drivers/media/rc/pwm-ir-tx.c | 4 ++-- drivers/platform/x86/lenovo-yogabook.c | 2 +- drivers/pwm/core.c | 18 ++++++++--------- drivers/pwm/pwm-twl-led.c | 2 +- drivers/pwm/pwm-vt8500.c | 2 +- drivers/pwm/sysfs.c | 10 ++++----- drivers/regulator/pwm-regulator.c | 4 ++-- drivers/video/backlight/lm3630a_bl.c | 2 +- drivers/video/backlight/lp855x_bl.c | 2 +- drivers/video/backlight/pwm_bl.c | 12 +++++------ drivers/video/fbdev/ssd1307fb.c | 2 +- include/linux/pwm.h | 28 +++++++++++++------------- 22 files changed, 68 insertions(+), 68 deletions(-) (limited to 'include') diff --git a/Documentation/driver-api/pwm.rst b/Documentation/driver-api/pwm.rst index bb264490a87a..f1d8197c8c43 100644 --- a/Documentation/driver-api/pwm.rst +++ b/Documentation/driver-api/pwm.rst @@ -41,7 +41,7 @@ the getter, devm_pwm_get() and devm_fwnode_pwm_get(), also exist. After being requested, a PWM has to be configured using:: - int pwm_apply_state(struct pwm_device *pwm, struct pwm_state *state); + int pwm_apply_might_sleep(struct pwm_device *pwm, struct pwm_state *state); This API controls both the PWM period/duty_cycle config and the enable/disable state. @@ -57,13 +57,13 @@ If supported by the driver, the signal can be optimized, for example to improve EMI by phase shifting the individual channels of a chip. The pwm_config(), pwm_enable() and pwm_disable() functions are just wrappers -around pwm_apply_state() and should not be used if the user wants to change +around pwm_apply_might_sleep() and should not be used if the user wants to change several parameter at once. For example, if you see pwm_config() and pwm_{enable,disable}() calls in the same function, this probably means you -should switch to pwm_apply_state(). +should switch to pwm_apply_might_sleep(). The PWM user API also allows one to query the PWM state that was passed to the -last invocation of pwm_apply_state() using pwm_get_state(). Note this is +last invocation of pwm_apply_might_sleep() using pwm_get_state(). Note this is different to what the driver has actually implemented if the request cannot be satisfied exactly with the hardware in use. There is currently no way for consumers to get the actually implemented settings. diff --git a/MAINTAINERS b/MAINTAINERS index 97f51d5ec1cf..c58480595220 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17576,7 +17576,7 @@ F: drivers/video/backlight/pwm_bl.c F: include/dt-bindings/pwm/ F: include/linux/pwm.h F: include/linux/pwm_backlight.h -K: pwm_(config|apply_state|ops) +K: pwm_(config|apply_might_sleep|ops) PXA GPIO DRIVER M: Robert Jarzmik diff --git a/drivers/gpu/drm/i915/display/intel_backlight.c b/drivers/gpu/drm/i915/display/intel_backlight.c index 2e8f17c04522..ff9b9918b0a1 100644 --- a/drivers/gpu/drm/i915/display/intel_backlight.c +++ b/drivers/gpu/drm/i915/display/intel_backlight.c @@ -274,7 +274,7 @@ static void ext_pwm_set_backlight(const struct drm_connector_state *conn_state, struct intel_panel *panel = &to_intel_connector(conn_state->connector)->panel; pwm_set_relative_duty_cycle(&panel->backlight.pwm_state, level, 100); - pwm_apply_state(panel->backlight.pwm, &panel->backlight.pwm_state); + pwm_apply_might_sleep(panel->backlight.pwm, &panel->backlight.pwm_state); } static void @@ -427,7 +427,7 @@ static void ext_pwm_disable_backlight(const struct drm_connector_state *old_conn intel_backlight_set_pwm_level(old_conn_state, level); panel->backlight.pwm_state.enabled = false; - pwm_apply_state(panel->backlight.pwm, &panel->backlight.pwm_state); + pwm_apply_might_sleep(panel->backlight.pwm, &panel->backlight.pwm_state); } void intel_backlight_disable(const struct drm_connector_state *old_conn_state) @@ -749,7 +749,7 @@ static void ext_pwm_enable_backlight(const struct intel_crtc_state *crtc_state, pwm_set_relative_duty_cycle(&panel->backlight.pwm_state, level, 100); panel->backlight.pwm_state.enabled = true; - pwm_apply_state(panel->backlight.pwm, &panel->backlight.pwm_state); + pwm_apply_might_sleep(panel->backlight.pwm, &panel->backlight.pwm_state); } static void __intel_backlight_enable(const struct intel_crtc_state *crtc_state, diff --git a/drivers/gpu/drm/solomon/ssd130x.c b/drivers/gpu/drm/solomon/ssd130x.c index e0174f82e353..cce043a4a1dc 100644 --- a/drivers/gpu/drm/solomon/ssd130x.c +++ b/drivers/gpu/drm/solomon/ssd130x.c @@ -319,7 +319,7 @@ static int ssd130x_pwm_enable(struct ssd130x_device *ssd130x) pwm_init_state(ssd130x->pwm, &pwmstate); pwm_set_relative_duty_cycle(&pwmstate, 50, 100); - pwm_apply_state(ssd130x->pwm, &pwmstate); + pwm_apply_might_sleep(ssd130x->pwm, &pwmstate); /* Enable the PWM */ pwm_enable(ssd130x->pwm); diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c index 6e4516c2ab89..b67bc9e833c0 100644 --- a/drivers/hwmon/pwm-fan.c +++ b/drivers/hwmon/pwm-fan.c @@ -151,7 +151,7 @@ static int pwm_fan_power_on(struct pwm_fan_ctx *ctx) } state->enabled = true; - ret = pwm_apply_state(ctx->pwm, state); + ret = pwm_apply_might_sleep(ctx->pwm, state); if (ret) { dev_err(ctx->dev, "failed to enable PWM\n"); goto disable_regulator; @@ -181,7 +181,7 @@ static int pwm_fan_power_off(struct pwm_fan_ctx *ctx) state->enabled = false; state->duty_cycle = 0; - ret = pwm_apply_state(ctx->pwm, state); + ret = pwm_apply_might_sleep(ctx->pwm, state); if (ret) { dev_err(ctx->dev, "failed to disable PWM\n"); return ret; @@ -207,7 +207,7 @@ static int __set_pwm(struct pwm_fan_ctx *ctx, unsigned long pwm) period = state->period; state->duty_cycle = DIV_ROUND_UP(pwm * (period - 1), MAX_PWM); - ret = pwm_apply_state(ctx->pwm, state); + ret = pwm_apply_might_sleep(ctx->pwm, state); if (ret) return ret; ret = pwm_fan_power_on(ctx); @@ -278,7 +278,7 @@ static int pwm_fan_update_enable(struct pwm_fan_ctx *ctx, long val) state, &enable_regulator); - pwm_apply_state(ctx->pwm, state); + pwm_apply_might_sleep(ctx->pwm, state); pwm_fan_switch_power(ctx, enable_regulator); pwm_fan_update_state(ctx, 0); } diff --git a/drivers/input/misc/da7280.c b/drivers/input/misc/da7280.c index ce82548916bb..c1fa75c0f970 100644 --- a/drivers/input/misc/da7280.c +++ b/drivers/input/misc/da7280.c @@ -352,7 +352,7 @@ static int da7280_haptic_set_pwm(struct da7280_haptic *haptics, bool enabled) state.duty_cycle = period_mag_multi; } - error = pwm_apply_state(haptics->pwm_dev, &state); + error = pwm_apply_might_sleep(haptics->pwm_dev, &state); if (error) dev_err(haptics->dev, "Failed to apply pwm state: %d\n", error); @@ -1175,7 +1175,7 @@ static int da7280_probe(struct i2c_client *client) /* Sync up PWM state and ensure it is off. */ pwm_init_state(haptics->pwm_dev, &state); state.enabled = false; - error = pwm_apply_state(haptics->pwm_dev, &state); + error = pwm_apply_might_sleep(haptics->pwm_dev, &state); if (error) { dev_err(dev, "Failed to apply PWM state: %d\n", error); return error; diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c index 1e731d8397c6..5b9aedf4362f 100644 --- a/drivers/input/misc/pwm-beeper.c +++ b/drivers/input/misc/pwm-beeper.c @@ -39,7 +39,7 @@ static int pwm_beeper_on(struct pwm_beeper *beeper, unsigned long period) state.period = period; pwm_set_relative_duty_cycle(&state, 50, 100); - error = pwm_apply_state(beeper->pwm, &state); + error = pwm_apply_might_sleep(beeper->pwm, &state); if (error) return error; @@ -138,7 +138,7 @@ static int pwm_beeper_probe(struct platform_device *pdev) /* Sync up PWM state and ensure it is off. */ pwm_init_state(beeper->pwm, &state); state.enabled = false; - error = pwm_apply_state(beeper->pwm, &state); + error = pwm_apply_might_sleep(beeper->pwm, &state); if (error) { dev_err(dev, "failed to apply initial PWM state: %d\n", error); diff --git a/drivers/input/misc/pwm-vibra.c b/drivers/input/misc/pwm-vibra.c index acac79c488aa..3e5ed685ed8f 100644 --- a/drivers/input/misc/pwm-vibra.c +++ b/drivers/input/misc/pwm-vibra.c @@ -56,7 +56,7 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator) pwm_set_relative_duty_cycle(&state, vibrator->level, 0xffff); state.enabled = true; - err = pwm_apply_state(vibrator->pwm, &state); + err = pwm_apply_might_sleep(vibrator->pwm, &state); if (err) { dev_err(pdev, "failed to apply pwm state: %d\n", err); return err; @@ -67,7 +67,7 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator) state.duty_cycle = vibrator->direction_duty_cycle; state.enabled = true; - err = pwm_apply_state(vibrator->pwm_dir, &state); + err = pwm_apply_might_sleep(vibrator->pwm_dir, &state); if (err) { dev_err(pdev, "failed to apply dir-pwm state: %d\n", err); pwm_disable(vibrator->pwm); @@ -160,7 +160,7 @@ static int pwm_vibrator_probe(struct platform_device *pdev) /* Sync up PWM state and ensure it is off. */ pwm_init_state(vibrator->pwm, &state); state.enabled = false; - err = pwm_apply_state(vibrator->pwm, &state); + err = pwm_apply_might_sleep(vibrator->pwm, &state); if (err) { dev_err(&pdev->dev, "failed to apply initial PWM state: %d\n", err); @@ -174,7 +174,7 @@ static int pwm_vibrator_probe(struct platform_device *pdev) /* Sync up PWM state and ensure it is off. */ pwm_init_state(vibrator->pwm_dir, &state); state.enabled = false; - err = pwm_apply_state(vibrator->pwm_dir, &state); + err = pwm_apply_might_sleep(vibrator->pwm_dir, &state); if (err) { dev_err(&pdev->dev, "failed to apply initial PWM state: %d\n", err); diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c index 2b3bf1353b70..4e3936a39d0e 100644 --- a/drivers/leds/leds-pwm.c +++ b/drivers/leds/leds-pwm.c @@ -54,7 +54,7 @@ static int led_pwm_set(struct led_classdev *led_cdev, led_dat->pwmstate.duty_cycle = duty; led_dat->pwmstate.enabled = true; - return pwm_apply_state(led_dat->pwm, &led_dat->pwmstate); + return pwm_apply_might_sleep(led_dat->pwm, &led_dat->pwmstate); } __attribute__((nonnull)) diff --git a/drivers/leds/rgb/leds-pwm-multicolor.c b/drivers/leds/rgb/leds-pwm-multicolor.c index 46cd062b8b24..e1a81e0109e8 100644 --- a/drivers/leds/rgb/leds-pwm-multicolor.c +++ b/drivers/leds/rgb/leds-pwm-multicolor.c @@ -51,8 +51,8 @@ static int led_pwm_mc_set(struct led_classdev *cdev, priv->leds[i].state.duty_cycle = duty; priv->leds[i].state.enabled = duty > 0; - ret = pwm_apply_state(priv->leds[i].pwm, - &priv->leds[i].state); + ret = pwm_apply_might_sleep(priv->leds[i].pwm, + &priv->leds[i].state); if (ret) break; } diff --git a/drivers/media/rc/pwm-ir-tx.c b/drivers/media/rc/pwm-ir-tx.c index c5f37c03af9c..cf51e2760975 100644 --- a/drivers/media/rc/pwm-ir-tx.c +++ b/drivers/media/rc/pwm-ir-tx.c @@ -68,7 +68,7 @@ static int pwm_ir_tx(struct rc_dev *dev, unsigned int *txbuf, for (i = 0; i < count; i++) { state.enabled = !(i % 2); - pwm_apply_state(pwm, &state); + pwm_apply_might_sleep(pwm, &state); edge = ktime_add_us(edge, txbuf[i]); delta = ktime_us_delta(edge, ktime_get()); @@ -77,7 +77,7 @@ static int pwm_ir_tx(struct rc_dev *dev, unsigned int *txbuf, } state.enabled = false; - pwm_apply_state(pwm, &state); + pwm_apply_might_sleep(pwm, &state); return count; } diff --git a/drivers/platform/x86/lenovo-yogabook.c b/drivers/platform/x86/lenovo-yogabook.c index b8d0239192cb..fd62bf746ebd 100644 --- a/drivers/platform/x86/lenovo-yogabook.c +++ b/drivers/platform/x86/lenovo-yogabook.c @@ -435,7 +435,7 @@ static int yogabook_pdev_set_kbd_backlight(struct yogabook_data *data, u8 level) .enabled = level, }; - pwm_apply_state(data->kbd_bl_pwm, &state); + pwm_apply_might_sleep(data->kbd_bl_pwm, &state); gpiod_set_value(data->kbd_bl_led_enable, level ? 1 : 0); return 0; } diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c index b0e50ca9398a..c6228843a1a7 100644 --- a/drivers/pwm/core.c +++ b/drivers/pwm/core.c @@ -326,8 +326,8 @@ struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip, } EXPORT_SYMBOL_GPL(pwm_request_from_chip); -static void pwm_apply_state_debug(struct pwm_device *pwm, - const struct pwm_state *state) +static void pwm_apply_debug(struct pwm_device *pwm, + const struct pwm_state *state) { struct pwm_state *last = &pwm->last; struct pwm_chip *chip = pwm->chip; @@ -433,11 +433,11 @@ static void pwm_apply_state_debug(struct pwm_device *pwm, } /** - * pwm_apply_state() - atomically apply a new state to a PWM device + * pwm_apply_might_sleep() - atomically apply a new state to a PWM device * @pwm: PWM device * @state: new state to apply */ -int pwm_apply_state(struct pwm_device *pwm, const struct pwm_state *state) +int pwm_apply_might_sleep(struct pwm_device *pwm, const struct pwm_state *state) { struct pwm_chip *chip; int err; @@ -445,7 +445,7 @@ int pwm_apply_state(struct pwm_device *pwm, const struct pwm_state *state) /* * Some lowlevel driver's implementations of .apply() make use of * mutexes, also with some drivers only returning when the new - * configuration is active calling pwm_apply_state() from atomic context + * configuration is active calling pwm_apply_might_sleep() from atomic context * is a bad idea. So make it explicit that calling this function might * sleep. */ @@ -475,11 +475,11 @@ int pwm_apply_state(struct pwm_device *pwm, const struct pwm_state *state) * only do this after pwm->state was applied as some * implementations of .get_state depend on this */ - pwm_apply_state_debug(pwm, state); + pwm_apply_debug(pwm, state); return 0; } -EXPORT_SYMBOL_GPL(pwm_apply_state); +EXPORT_SYMBOL_GPL(pwm_apply_might_sleep); /** * pwm_capture() - capture and report a PWM signal @@ -537,7 +537,7 @@ int pwm_adjust_config(struct pwm_device *pwm) state.period = pargs.period; state.polarity = pargs.polarity; - return pwm_apply_state(pwm, &state); + return pwm_apply_might_sleep(pwm, &state); } /* @@ -560,7 +560,7 @@ int pwm_adjust_config(struct pwm_device *pwm) state.duty_cycle = state.period - state.duty_cycle; } - return pwm_apply_state(pwm, &state); + return pwm_apply_might_sleep(pwm, &state); } EXPORT_SYMBOL_GPL(pwm_adjust_config); diff --git a/drivers/pwm/pwm-twl-led.c b/drivers/pwm/pwm-twl-led.c index 8a870d0db3c6..c670ccb81653 100644 --- a/drivers/pwm/pwm-twl-led.c +++ b/drivers/pwm/pwm-twl-led.c @@ -172,7 +172,7 @@ static int twl4030_pwmled_apply(struct pwm_chip *chip, struct pwm_device *pwm, * We cannot skip calling ->config even if state->period == * pwm->state.period && state->duty_cycle == pwm->state.duty_cycle * because we might have exited early in the last call to - * pwm_apply_state because of !state->enabled and so the two values in + * pwm_apply_might_sleep because of !state->enabled and so the two values in * pwm->state might not be configured in hardware. */ ret = twl4030_pwmled_config(chip, pwm, diff --git a/drivers/pwm/pwm-vt8500.c b/drivers/pwm/pwm-vt8500.c index bdea60389487..7bfeacee05d0 100644 --- a/drivers/pwm/pwm-vt8500.c +++ b/drivers/pwm/pwm-vt8500.c @@ -206,7 +206,7 @@ static int vt8500_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, * We cannot skip calling ->config even if state->period == * pwm->state.period && state->duty_cycle == pwm->state.duty_cycle * because we might have exited early in the last call to - * pwm_apply_state because of !state->enabled and so the two values in + * pwm_apply_might_sleep because of !state->enabled and so the two values in * pwm->state might not be configured in hardware. */ err = vt8500_pwm_config(chip, pwm, state->duty_cycle, state->period); diff --git a/drivers/pwm/sysfs.c b/drivers/pwm/sysfs.c index 4edb994fa2e1..1698609d91c8 100644 --- a/drivers/pwm/sysfs.c +++ b/drivers/pwm/sysfs.c @@ -62,7 +62,7 @@ static ssize_t period_store(struct device *child, mutex_lock(&export->lock); pwm_get_state(pwm, &state); state.period = val; - ret = pwm_apply_state(pwm, &state); + ret = pwm_apply_might_sleep(pwm, &state); mutex_unlock(&export->lock); return ret ? : size; @@ -97,7 +97,7 @@ static ssize_t duty_cycle_store(struct device *child, mutex_lock(&export->lock); pwm_get_state(pwm, &state); state.duty_cycle = val; - ret = pwm_apply_state(pwm, &state); + ret = pwm_apply_might_sleep(pwm, &state); mutex_unlock(&export->lock); return ret ? : size; @@ -144,7 +144,7 @@ static ssize_t enable_store(struct device *child, goto unlock; } - ret = pwm_apply_state(pwm, &state); + ret = pwm_apply_might_sleep(pwm, &state); unlock: mutex_unlock(&export->lock); @@ -194,7 +194,7 @@ static ssize_t polarity_store(struct device *child, mutex_lock(&export->lock); pwm_get_state(pwm, &state); state.polarity = polarity; - ret = pwm_apply_state(pwm, &state); + ret = pwm_apply_might_sleep(pwm, &state); mutex_unlock(&export->lock); return ret ? : size; @@ -401,7 +401,7 @@ static int pwm_class_apply_state(struct pwm_export *export, struct pwm_device *pwm, struct pwm_state *state) { - int ret = pwm_apply_state(pwm, state); + int ret = pwm_apply_might_sleep(pwm, state); /* release lock taken in pwm_class_get_state */ mutex_unlock(&export->lock); diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c index 2aff6db748e2..698c420e0869 100644 --- a/drivers/regulator/pwm-regulator.c +++ b/drivers/regulator/pwm-regulator.c @@ -90,7 +90,7 @@ static int pwm_regulator_set_voltage_sel(struct regulator_dev *rdev, pwm_set_relative_duty_cycle(&pstate, drvdata->duty_cycle_table[selector].dutycycle, 100); - ret = pwm_apply_state(drvdata->pwm, &pstate); + ret = pwm_apply_might_sleep(drvdata->pwm, &pstate); if (ret) { dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret); return ret; @@ -216,7 +216,7 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev, pwm_set_relative_duty_cycle(&pstate, dutycycle, duty_unit); - ret = pwm_apply_state(drvdata->pwm, &pstate); + ret = pwm_apply_might_sleep(drvdata->pwm, &pstate); if (ret) { dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret); return ret; diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c index 8fcb62be597b..a3412c936ca2 100644 --- a/drivers/video/backlight/lm3630a_bl.c +++ b/drivers/video/backlight/lm3630a_bl.c @@ -180,7 +180,7 @@ static int lm3630a_pwm_ctrl(struct lm3630a_chip *pchip, int br, int br_max) pchip->pwmd_state.enabled = pchip->pwmd_state.duty_cycle ? true : false; - return pwm_apply_state(pchip->pwmd, &pchip->pwmd_state); + return pwm_apply_might_sleep(pchip->pwmd, &pchip->pwmd_state); } /* update and get brightness */ diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c index da1f124db69c..7075bfab59c4 100644 --- a/drivers/video/backlight/lp855x_bl.c +++ b/drivers/video/backlight/lp855x_bl.c @@ -234,7 +234,7 @@ static int lp855x_pwm_ctrl(struct lp855x *lp, int br, int max_br) state.duty_cycle = div_u64(br * state.period, max_br); state.enabled = state.duty_cycle; - return pwm_apply_state(lp->pwm, &state); + return pwm_apply_might_sleep(lp->pwm, &state); } static int lp855x_bl_update_status(struct backlight_device *bl) diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index 289bd9ce4d36..35c716e9043c 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -103,7 +103,7 @@ static int pwm_backlight_update_status(struct backlight_device *bl) pwm_get_state(pb->pwm, &state); state.duty_cycle = compute_duty_cycle(pb, brightness, &state); state.enabled = true; - pwm_apply_state(pb->pwm, &state); + pwm_apply_might_sleep(pb->pwm, &state); pwm_backlight_power_on(pb); } else { @@ -120,7 +120,7 @@ static int pwm_backlight_update_status(struct backlight_device *bl) * inactive output. */ state.enabled = !pb->power_supply && !pb->enable_gpio; - pwm_apply_state(pb->pwm, &state); + pwm_apply_might_sleep(pb->pwm, &state); } if (pb->notify_after) @@ -528,7 +528,7 @@ static int pwm_backlight_probe(struct platform_device *pdev) if (!state.period && (data->pwm_period_ns > 0)) state.period = data->pwm_period_ns; - ret = pwm_apply_state(pb->pwm, &state); + ret = pwm_apply_might_sleep(pb->pwm, &state); if (ret) { dev_err(&pdev->dev, "failed to apply initial PWM state: %d\n", ret); @@ -633,7 +633,7 @@ static void pwm_backlight_remove(struct platform_device *pdev) pwm_get_state(pb->pwm, &state); state.duty_cycle = 0; state.enabled = false; - pwm_apply_state(pb->pwm, &state); + pwm_apply_might_sleep(pb->pwm, &state); if (pb->exit) pb->exit(&pdev->dev); @@ -649,7 +649,7 @@ static void pwm_backlight_shutdown(struct platform_device *pdev) pwm_get_state(pb->pwm, &state); state.duty_cycle = 0; state.enabled = false; - pwm_apply_state(pb->pwm, &state); + pwm_apply_might_sleep(pb->pwm, &state); } #ifdef CONFIG_PM_SLEEP @@ -673,7 +673,7 @@ static int pwm_backlight_suspend(struct device *dev) pwm_get_state(pb->pwm, &state); state.duty_cycle = 0; state.enabled = false; - pwm_apply_state(pb->pwm, &state); + pwm_apply_might_sleep(pb->pwm, &state); if (pb->notify_after) pb->notify_after(pb->dev, 0); diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c index 5ae48e36fccb..1a4f90ea7d5a 100644 --- a/drivers/video/fbdev/ssd1307fb.c +++ b/drivers/video/fbdev/ssd1307fb.c @@ -347,7 +347,7 @@ static int ssd1307fb_init(struct ssd1307fb_par *par) pwm_init_state(par->pwm, &pwmstate); pwm_set_relative_duty_cycle(&pwmstate, 50, 100); - pwm_apply_state(par->pwm, &pwmstate); + pwm_apply_might_sleep(par->pwm, &pwmstate); /* Enable the PWM */ pwm_enable(par->pwm); diff --git a/include/linux/pwm.h b/include/linux/pwm.h index f87655c06c82..b64b8a82415c 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -92,8 +92,8 @@ struct pwm_device { * @state: state to fill with the current PWM state * * The returned PWM state represents the state that was applied by a previous call to - * pwm_apply_state(). Drivers may have to slightly tweak that state before programming it to - * hardware. If pwm_apply_state() was never called, this returns either the current hardware + * pwm_apply_might_sleep(). Drivers may have to slightly tweak that state before programming it to + * hardware. If pwm_apply_might_sleep() was never called, this returns either the current hardware * state (if supported) or the default settings. */ static inline void pwm_get_state(const struct pwm_device *pwm, @@ -157,20 +157,20 @@ static inline void pwm_get_args(const struct pwm_device *pwm, } /** - * pwm_init_state() - prepare a new state to be applied with pwm_apply_state() + * pwm_init_state() - prepare a new state to be applied with pwm_apply_might_sleep() * @pwm: PWM device * @state: state to fill with the prepared PWM state * * This functions prepares a state that can later be tweaked and applied - * to the PWM device with pwm_apply_state(). This is a convenient function + * to the PWM device with pwm_apply_might_sleep(). This is a convenient function * that first retrieves the current PWM state and the replaces the period * and polarity fields with the reference values defined in pwm->args. * Once the function returns, you can adjust the ->enabled and ->duty_cycle - * fields according to your needs before calling pwm_apply_state(). + * fields according to your needs before calling pwm_apply_might_sleep(). * * ->duty_cycle is initially set to zero to avoid cases where the current * ->duty_cycle value exceed the pwm_args->period one, which would trigger - * an error if the user calls pwm_apply_state() without adjusting ->duty_cycle + * an error if the user calls pwm_apply_might_sleep() without adjusting ->duty_cycle * first. */ static inline void pwm_init_state(const struct pwm_device *pwm, @@ -226,7 +226,7 @@ pwm_get_relative_duty_cycle(const struct pwm_state *state, unsigned int scale) * * pwm_init_state(pwm, &state); * pwm_set_relative_duty_cycle(&state, 50, 100); - * pwm_apply_state(pwm, &state); + * pwm_apply_might_sleep(pwm, &state); * * This functions returns -EINVAL if @duty_cycle and/or @scale are * inconsistent (@scale == 0 or @duty_cycle > @scale). @@ -304,7 +304,7 @@ struct pwm_chip { #if IS_ENABLED(CONFIG_PWM) /* PWM user APIs */ -int pwm_apply_state(struct pwm_device *pwm, const struct pwm_state *state); +int pwm_apply_might_sleep(struct pwm_device *pwm, const struct pwm_state *state); int pwm_adjust_config(struct pwm_device *pwm); /** @@ -332,7 +332,7 @@ static inline int pwm_config(struct pwm_device *pwm, int duty_ns, state.duty_cycle = duty_ns; state.period = period_ns; - return pwm_apply_state(pwm, &state); + return pwm_apply_might_sleep(pwm, &state); } /** @@ -353,7 +353,7 @@ static inline int pwm_enable(struct pwm_device *pwm) return 0; state.enabled = true; - return pwm_apply_state(pwm, &state); + return pwm_apply_might_sleep(pwm, &state); } /** @@ -372,7 +372,7 @@ static inline void pwm_disable(struct pwm_device *pwm) return; state.enabled = false; - pwm_apply_state(pwm, &state); + pwm_apply_might_sleep(pwm, &state); } /* PWM provider APIs */ @@ -403,8 +403,8 @@ struct pwm_device *devm_fwnode_pwm_get(struct device *dev, struct fwnode_handle *fwnode, const char *con_id); #else -static inline int pwm_apply_state(struct pwm_device *pwm, - const struct pwm_state *state) +static inline int pwm_apply_might_sleep(struct pwm_device *pwm, + const struct pwm_state *state) { might_sleep(); return -ENOTSUPP; @@ -521,7 +521,7 @@ static inline void pwm_apply_args(struct pwm_device *pwm) state.period = pwm->args.period; state.usage_power = false; - pwm_apply_state(pwm, &state); + pwm_apply_might_sleep(pwm, &state); } struct pwm_lookup { -- cgit v1.2.3 From dc518b378dced419baa95d76a85f4c8c405722bc Mon Sep 17 00:00:00 2001 From: Sean Young Date: Tue, 19 Dec 2023 16:30:25 +0000 Subject: pwm: Replace ENOTSUPP with EOPNOTSUPP MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to Documentation/dev-tools/checkpatch.rst ENOTSUPP is not recommended and EOPNOTSUPP should be used instead. Signed-off-by: Sean Young Acked-by: Uwe Kleine-König Signed-off-by: Thierry Reding --- include/linux/pwm.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/pwm.h b/include/linux/pwm.h index b64b8a82415c..c9cb87b59ac8 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -407,12 +407,12 @@ static inline int pwm_apply_might_sleep(struct pwm_device *pwm, const struct pwm_state *state) { might_sleep(); - return -ENOTSUPP; + return -EOPNOTSUPP; } static inline int pwm_adjust_config(struct pwm_device *pwm) { - return -ENOTSUPP; + return -EOPNOTSUPP; } static inline int pwm_config(struct pwm_device *pwm, int duty_ns, -- cgit v1.2.3 From 7170d3beafc2373dd76b6b5d6e617d89e4e42b8b Mon Sep 17 00:00:00 2001 From: Sean Young Date: Tue, 19 Dec 2023 16:30:27 +0000 Subject: pwm: Make it possible to apply PWM changes in atomic context MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some PWM devices require sleeping, for example if the pwm device is connected over I2C. However, many PWM devices could be used from atomic context, e.g. memory mapped PWM. This is useful for, for example, the pwm-ir-tx driver which requires precise timing. Sleeping causes havoc with the generated IR signal. Since not all PWM devices can support atomic context, we also add a pwm_might_sleep() function to check if is not supported. Signed-off-by: Sean Young Reviewed-by: Uwe Kleine-König Signed-off-by: Thierry Reding --- Documentation/driver-api/pwm.rst | 9 ++++++ MAINTAINERS | 2 +- drivers/pwm/core.c | 62 +++++++++++++++++++++++++++++++++------- include/linux/pwm.h | 25 ++++++++++++++++ 4 files changed, 86 insertions(+), 12 deletions(-) (limited to 'include') diff --git a/Documentation/driver-api/pwm.rst b/Documentation/driver-api/pwm.rst index f1d8197c8c43..3c28ccc4b611 100644 --- a/Documentation/driver-api/pwm.rst +++ b/Documentation/driver-api/pwm.rst @@ -46,6 +46,15 @@ After being requested, a PWM has to be configured using:: This API controls both the PWM period/duty_cycle config and the enable/disable state. +PWM devices can be used from atomic context, if the PWM does not sleep. You +can check if this the case with:: + + bool pwm_might_sleep(struct pwm_device *pwm); + +If false, the PWM can also be configured from atomic context with:: + + int pwm_apply_atomic(struct pwm_device *pwm, struct pwm_state *state); + As a consumer, don't rely on the output's state for a disabled PWM. If it's easily possible, drivers are supposed to emit the inactive state, but some drivers cannot. If you rely on getting the inactive state, use .duty_cycle=0, diff --git a/MAINTAINERS b/MAINTAINERS index c58480595220..5342cf32d73f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17576,7 +17576,7 @@ F: drivers/video/backlight/pwm_bl.c F: include/dt-bindings/pwm/ F: include/linux/pwm.h F: include/linux/pwm_backlight.h -K: pwm_(config|apply_might_sleep|ops) +K: pwm_(config|apply_might_sleep|apply_atomic|ops) PXA GPIO DRIVER M: Robert Jarzmik diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c index c6228843a1a7..f1ded8ce5ea4 100644 --- a/drivers/pwm/core.c +++ b/drivers/pwm/core.c @@ -433,24 +433,15 @@ static void pwm_apply_debug(struct pwm_device *pwm, } /** - * pwm_apply_might_sleep() - atomically apply a new state to a PWM device + * __pwm_apply() - atomically apply a new state to a PWM device * @pwm: PWM device * @state: new state to apply */ -int pwm_apply_might_sleep(struct pwm_device *pwm, const struct pwm_state *state) +static int __pwm_apply(struct pwm_device *pwm, const struct pwm_state *state) { struct pwm_chip *chip; int err; - /* - * Some lowlevel driver's implementations of .apply() make use of - * mutexes, also with some drivers only returning when the new - * configuration is active calling pwm_apply_might_sleep() from atomic context - * is a bad idea. So make it explicit that calling this function might - * sleep. - */ - might_sleep(); - if (!pwm || !state || !state->period || state->duty_cycle > state->period) return -EINVAL; @@ -479,8 +470,57 @@ int pwm_apply_might_sleep(struct pwm_device *pwm, const struct pwm_state *state) return 0; } + +/** + * pwm_apply_might_sleep() - atomically apply a new state to a PWM device + * Cannot be used in atomic context. + * @pwm: PWM device + * @state: new state to apply + */ +int pwm_apply_might_sleep(struct pwm_device *pwm, const struct pwm_state *state) +{ + int err; + + /* + * Some lowlevel driver's implementations of .apply() make use of + * mutexes, also with some drivers only returning when the new + * configuration is active calling pwm_apply_might_sleep() from atomic context + * is a bad idea. So make it explicit that calling this function might + * sleep. + */ + might_sleep(); + + if (IS_ENABLED(CONFIG_PWM_DEBUG) && pwm->chip->atomic) { + /* + * Catch any drivers that have been marked as atomic but + * that will sleep anyway. + */ + non_block_start(); + err = __pwm_apply(pwm, state); + non_block_end(); + } else { + err = __pwm_apply(pwm, state); + } + + return err; +} EXPORT_SYMBOL_GPL(pwm_apply_might_sleep); +/** + * pwm_apply_atomic() - apply a new state to a PWM device from atomic context + * Not all PWM devices support this function, check with pwm_might_sleep(). + * @pwm: PWM device + * @state: new state to apply + */ +int pwm_apply_atomic(struct pwm_device *pwm, const struct pwm_state *state) +{ + WARN_ONCE(!pwm->chip->atomic, + "sleeping PWM driver used in atomic context\n"); + + return __pwm_apply(pwm, state); +} +EXPORT_SYMBOL_GPL(pwm_apply_atomic); + /** * pwm_capture() - capture and report a PWM signal * @pwm: PWM device diff --git a/include/linux/pwm.h b/include/linux/pwm.h index c9cb87b59ac8..495af3627939 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -285,6 +285,7 @@ struct pwm_ops { * @npwm: number of PWMs controlled by this chip * @of_xlate: request a PWM device given a device tree PWM specifier * @of_pwm_n_cells: number of cells expected in the device tree PWM specifier + * @atomic: can the driver's ->apply() be called in atomic context * @pwms: array of PWM devices allocated by the framework */ struct pwm_chip { @@ -297,6 +298,7 @@ struct pwm_chip { struct pwm_device * (*of_xlate)(struct pwm_chip *chip, const struct of_phandle_args *args); unsigned int of_pwm_n_cells; + bool atomic; /* only used internally by the PWM framework */ struct pwm_device *pwms; @@ -305,6 +307,7 @@ struct pwm_chip { #if IS_ENABLED(CONFIG_PWM) /* PWM user APIs */ int pwm_apply_might_sleep(struct pwm_device *pwm, const struct pwm_state *state); +int pwm_apply_atomic(struct pwm_device *pwm, const struct pwm_state *state); int pwm_adjust_config(struct pwm_device *pwm); /** @@ -375,6 +378,17 @@ static inline void pwm_disable(struct pwm_device *pwm) pwm_apply_might_sleep(pwm, &state); } +/** + * pwm_might_sleep() - is pwm_apply_atomic() supported? + * @pwm: PWM device + * + * Returns: false if pwm_apply_atomic() can be called from atomic context. + */ +static inline bool pwm_might_sleep(struct pwm_device *pwm) +{ + return !pwm->chip->atomic; +} + /* PWM provider APIs */ int pwm_capture(struct pwm_device *pwm, struct pwm_capture *result, unsigned long timeout); @@ -403,6 +417,11 @@ struct pwm_device *devm_fwnode_pwm_get(struct device *dev, struct fwnode_handle *fwnode, const char *con_id); #else +static inline bool pwm_might_sleep(struct pwm_device *pwm) +{ + return true; +} + static inline int pwm_apply_might_sleep(struct pwm_device *pwm, const struct pwm_state *state) { @@ -410,6 +429,12 @@ static inline int pwm_apply_might_sleep(struct pwm_device *pwm, return -EOPNOTSUPP; } +static inline int pwm_apply_atomic(struct pwm_device *pwm, + const struct pwm_state *state) +{ + return -EOPNOTSUPP; +} + static inline int pwm_adjust_config(struct pwm_device *pwm) { return -EOPNOTSUPP; -- cgit v1.2.3 From 80e4a9987999e682366d60f43a7b2adefc48e222 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Sun, 10 Dec 2023 00:00:47 +0100 Subject: pwm: Drop two unused API functions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit These functions are unused. Also I think there is no valid use case where these are correct to be called. So drop them. Signed-off-by: Uwe Kleine-König Signed-off-by: Thierry Reding --- include/linux/pwm.h | 12 ------------ 1 file changed, 12 deletions(-) (limited to 'include') diff --git a/include/linux/pwm.h b/include/linux/pwm.h index 495af3627939..5dd665d8c909 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -111,12 +111,6 @@ static inline bool pwm_is_enabled(const struct pwm_device *pwm) return state.enabled; } -static inline void pwm_set_period(struct pwm_device *pwm, u64 period) -{ - if (pwm) - pwm->state.period = period; -} - static inline u64 pwm_get_period(const struct pwm_device *pwm) { struct pwm_state state; @@ -126,12 +120,6 @@ static inline u64 pwm_get_period(const struct pwm_device *pwm) return state.period; } -static inline void pwm_set_duty_cycle(struct pwm_device *pwm, unsigned int duty) -{ - if (pwm) - pwm->state.duty_cycle = duty; -} - static inline u64 pwm_get_duty_cycle(const struct pwm_device *pwm) { struct pwm_state state; -- cgit v1.2.3 From c2e64baac4f36f7e0365218c7523bb9ba4639250 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 21 Dec 2023 11:08:02 +0100 Subject: pwm: Add pwm_apply_state() compatibility stub MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In order to make the transition to the new pwm_apply_might_sleep() a bit smoother, add a compatibility stub. This will prevent new calls to the old function introduced via other subsystems from breaking builds. Once the next merge window has closed we can take another stab at removing the stub. Reviewed-by: Uwe Kleine-König Signed-off-by: Thierry Reding --- include/linux/pwm.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include') diff --git a/include/linux/pwm.h b/include/linux/pwm.h index 5dd665d8c909..2a5e1154652e 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -537,6 +537,13 @@ static inline void pwm_apply_args(struct pwm_device *pwm) pwm_apply_might_sleep(pwm, &state); } +/* only for backwards-compatibility, new code should not use this */ +static inline int pwm_apply_state(struct pwm_device *pwm, + const struct pwm_state *state) +{ + return pwm_apply_might_sleep(pwm, state); +} + struct pwm_lookup { struct list_head list; const char *provider; -- cgit v1.2.3 From d73f444d06fb8a42a5c0623453f3ea1fe9880229 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 22 Dec 2023 21:06:20 -0800 Subject: pwm: linux/pwm.h: fix Excess kernel-doc description warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Remove the @pwm: line to prevent the kernel-doc warning: include/linux/pwm.h:87: warning: Excess struct member 'pwm' description in 'pwm_device' Signed-off-by: Randy Dunlap Cc: Thierry Reding Cc: Uwe Kleine-König Cc: Fixes: f3e25e68ceb2 ("pwm: Drop unused member "pwm" from struct pwm_device") Reviewed-by: Uwe Kleine-König Signed-off-by: Thierry Reding --- include/linux/pwm.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/pwm.h b/include/linux/pwm.h index 2a5e1154652e..fcc2c4496f73 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -69,7 +69,6 @@ struct pwm_state { * @label: name of the PWM device * @flags: flags associated with the PWM device * @hwpwm: per-chip relative index of the PWM device - * @pwm: global index of the PWM device * @chip: PWM chip providing this PWM device * @args: PWM arguments * @state: last applied state -- cgit v1.2.3