From bac806830fde94ccf41482535fc442c02656febc Mon Sep 17 00:00:00 2001 From: Wenchao Chen Date: Fri, 25 Aug 2023 17:17:42 +0800 Subject: mmc: core: Add host specific tuning support for SD HS mode To support the need for host specific tuning for SD high-speed mode, let's add two new optional callbacks, ->prepare|execute_sd_hs_tuning() and let's call them when switching into the SD high-speed mode. Note that, during the tuning process it's also needed for host drivers to send commands to the SD card to verify that the tuning process succeeds. Therefore, let's also share the corresponding functions from the core to allow this. Signed-off-by: Wenchao Chen Link: https://lore.kernel.org/r/20230825091743.15613-2-wenchao.chen@unisoc.com [Ulf: Dropped unnecessary function declarations and updated the commit msg] Signed-off-by: Ulf Hansson --- include/linux/mmc/host.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 461d1543893b..62a6847a3b6f 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -184,6 +184,12 @@ struct mmc_host_ops { /* Execute HS400 tuning depending host driver */ int (*execute_hs400_tuning)(struct mmc_host *host, struct mmc_card *card); + /* Optional callback to prepare for SD high-speed tuning */ + int (*prepare_sd_hs_tuning)(struct mmc_host *host, struct mmc_card *card); + + /* Optional callback to execute SD high-speed tuning */ + int (*execute_sd_hs_tuning)(struct mmc_host *host, struct mmc_card *card); + /* Prepare switch to DDR during the HS400 init sequence */ int (*hs400_prepare_ddr)(struct mmc_host *host); @@ -665,6 +671,8 @@ static inline void mmc_debugfs_err_stats_inc(struct mmc_host *host, host->err_stats[stat] += 1; } +int mmc_sd_switch(struct mmc_card *card, int mode, int group, u8 value, u8 *resp); +int mmc_send_status(struct mmc_card *card, u32 *status); int mmc_send_tuning(struct mmc_host *host, u32 opcode, int *cmd_error); int mmc_send_abort_tuning(struct mmc_host *host, u32 opcode); int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd); -- cgit v1.2.3 From ce6e94722523f85e265455eb3296ebdbe996b3b5 Mon Sep 17 00:00:00 2001 From: Balamanikandan Gunasundar Date: Fri, 25 Aug 2023 15:21:55 +0530 Subject: mmc: atmel-mci: Convert to gpio descriptors Replace the legacy GPIO APIs with gpio descriptor consumer interface. To maintain backward compatibility, we rely on the "cd-inverted" property to manage the invertion flag instead of GPIO property. Signed-off-by: Balamanikandan Gunasundar Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20230825095157.76073-2-balamanikandan.gunasundar@microchip.com Signed-off-by: Ulf Hansson --- drivers/mmc/host/atmel-mci.c | 77 +++++++++++++++++++++----------------------- include/linux/atmel-mci.h | 4 +-- 2 files changed, 39 insertions(+), 42 deletions(-) (limited to 'include/linux') diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 1f89d02c4685..892d29fed9ec 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -11,14 +11,14 @@ #include #include #include -#include #include #include #include #include #include #include -#include +#include +#include #include #include #include @@ -387,8 +387,8 @@ struct atmel_mci_slot { #define ATMCI_CARD_NEED_INIT 1 #define ATMCI_SHUTDOWN 2 - int detect_pin; - int wp_pin; + struct gpio_desc *detect_pin; + struct gpio_desc *wp_pin; bool detect_is_active_high; struct timer_list detect_timer; @@ -636,7 +636,10 @@ atmci_of_init(struct platform_device *pdev) pdata->slot[slot_id].bus_width = 1; pdata->slot[slot_id].detect_pin = - of_get_named_gpio(cnp, "cd-gpios", 0); + devm_fwnode_gpiod_get(&pdev->dev, of_fwnode_handle(cnp), + "cd", GPIOD_IN, "cd-gpios"); + if (IS_ERR(pdata->slot[slot_id].detect_pin)) + pdata->slot[slot_id].detect_pin = NULL; pdata->slot[slot_id].detect_is_active_high = of_property_read_bool(cnp, "cd-inverted"); @@ -645,7 +648,10 @@ atmci_of_init(struct platform_device *pdev) of_property_read_bool(cnp, "non-removable"); pdata->slot[slot_id].wp_pin = - of_get_named_gpio(cnp, "wp-gpios", 0); + devm_fwnode_gpiod_get(&pdev->dev, of_fwnode_handle(cnp), + "wp", GPIOD_IN, "wp-gpios"); + if (IS_ERR(pdata->slot[slot_id].wp_pin)) + pdata->slot[slot_id].wp_pin = NULL; } return pdata; @@ -1508,8 +1514,8 @@ static int atmci_get_ro(struct mmc_host *mmc) int read_only = -ENOSYS; struct atmel_mci_slot *slot = mmc_priv(mmc); - if (gpio_is_valid(slot->wp_pin)) { - read_only = gpio_get_value(slot->wp_pin); + if (slot->wp_pin) { + read_only = gpiod_get_value(slot->wp_pin); dev_dbg(&mmc->class_dev, "card is %s\n", read_only ? "read-only" : "read-write"); } @@ -1522,8 +1528,8 @@ static int atmci_get_cd(struct mmc_host *mmc) int present = -ENOSYS; struct atmel_mci_slot *slot = mmc_priv(mmc); - if (gpio_is_valid(slot->detect_pin)) { - present = !(gpio_get_value(slot->detect_pin) ^ + if (slot->detect_pin) { + present = !(gpiod_get_raw_value(slot->detect_pin) ^ slot->detect_is_active_high); dev_dbg(&mmc->class_dev, "card is %spresent\n", present ? "" : "not "); @@ -1636,8 +1642,8 @@ static void atmci_detect_change(struct timer_list *t) if (test_bit(ATMCI_SHUTDOWN, &slot->flags)) return; - enable_irq(gpio_to_irq(slot->detect_pin)); - present = !(gpio_get_value(slot->detect_pin) ^ + enable_irq(gpiod_to_irq(slot->detect_pin)); + present = !(gpiod_get_raw_value(slot->detect_pin) ^ slot->detect_is_active_high); present_old = test_bit(ATMCI_CARD_PRESENT, &slot->flags); @@ -2236,9 +2242,9 @@ static int atmci_init_slot(struct atmel_mci *host, dev_dbg(&mmc->class_dev, "slot[%u]: bus_width=%u, detect_pin=%d, " "detect_is_active_high=%s, wp_pin=%d\n", - id, slot_data->bus_width, slot_data->detect_pin, + id, slot_data->bus_width, desc_to_gpio(slot_data->detect_pin), slot_data->detect_is_active_high ? "true" : "false", - slot_data->wp_pin); + desc_to_gpio(slot_data->wp_pin)); mmc->ops = &atmci_ops; mmc->f_min = DIV_ROUND_UP(host->bus_hz, 512); @@ -2274,31 +2280,24 @@ static int atmci_init_slot(struct atmel_mci *host, /* Assume card is present initially */ set_bit(ATMCI_CARD_PRESENT, &slot->flags); - if (gpio_is_valid(slot->detect_pin)) { - if (devm_gpio_request(&host->pdev->dev, slot->detect_pin, - "mmc_detect")) { - dev_dbg(&mmc->class_dev, "no detect pin available\n"); - slot->detect_pin = -EBUSY; - } else if (gpio_get_value(slot->detect_pin) ^ - slot->detect_is_active_high) { + if (slot->detect_pin) { + if (gpiod_get_raw_value(slot->detect_pin) ^ + slot->detect_is_active_high) { clear_bit(ATMCI_CARD_PRESENT, &slot->flags); } + } else { + dev_dbg(&mmc->class_dev, "no detect pin available\n"); } - if (!gpio_is_valid(slot->detect_pin)) { + if (!slot->detect_pin) { if (slot_data->non_removable) mmc->caps |= MMC_CAP_NONREMOVABLE; else mmc->caps |= MMC_CAP_NEEDS_POLL; } - if (gpio_is_valid(slot->wp_pin)) { - if (devm_gpio_request(&host->pdev->dev, slot->wp_pin, - "mmc_wp")) { - dev_dbg(&mmc->class_dev, "no WP pin available\n"); - slot->wp_pin = -EBUSY; - } - } + if (!slot->wp_pin) + dev_dbg(&mmc->class_dev, "no WP pin available\n"); host->slot[id] = slot; mmc_regulator_get_supply(mmc); @@ -2308,18 +2307,18 @@ static int atmci_init_slot(struct atmel_mci *host, return ret; } - if (gpio_is_valid(slot->detect_pin)) { + if (slot->detect_pin) { timer_setup(&slot->detect_timer, atmci_detect_change, 0); - ret = request_irq(gpio_to_irq(slot->detect_pin), - atmci_detect_interrupt, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, - "mmc-detect", slot); + ret = request_irq(gpiod_to_irq(slot->detect_pin), + atmci_detect_interrupt, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "mmc-detect", slot); if (ret) { dev_dbg(&mmc->class_dev, "could not request IRQ %d for detect pin\n", - gpio_to_irq(slot->detect_pin)); - slot->detect_pin = -EBUSY; + gpiod_to_irq(slot->detect_pin)); + slot->detect_pin = NULL; } } @@ -2338,10 +2337,8 @@ static void atmci_cleanup_slot(struct atmel_mci_slot *slot, mmc_remove_host(slot->mmc); - if (gpio_is_valid(slot->detect_pin)) { - int pin = slot->detect_pin; - - free_irq(gpio_to_irq(pin), slot); + if (slot->detect_pin) { + free_irq(gpiod_to_irq(slot->detect_pin), slot); del_timer_sync(&slot->detect_timer); } diff --git a/include/linux/atmel-mci.h b/include/linux/atmel-mci.h index 1491af38cc6e..017e7d8f6126 100644 --- a/include/linux/atmel-mci.h +++ b/include/linux/atmel-mci.h @@ -26,8 +26,8 @@ */ struct mci_slot_pdata { unsigned int bus_width; - int detect_pin; - int wp_pin; + struct gpio_desc *detect_pin; + struct gpio_desc *wp_pin; bool detect_is_active_high; bool non_removable; }; -- cgit v1.2.3 From d2c6d518c21d73d96616e08a19eccd4642f4bafa Mon Sep 17 00:00:00 2001 From: Balamanikandan Gunasundar Date: Fri, 25 Aug 2023 15:21:56 +0530 Subject: mmc: atmel-mci: move atmel MCI header file Move the contents of linux/atmel-mci.h into drivers/mmc/host/atmel-mci.c as it is only used in one file Signed-off-by: Balamanikandan Gunasundar Reviewed-by: Ludovic Desroches Link: https://lore.kernel.org/r/20230825095157.76073-3-balamanikandan.gunasundar@microchip.com Signed-off-by: Ulf Hansson --- drivers/mmc/host/atmel-mci.c | 39 ++++++++++++++++++++++++++++++++++++- include/linux/atmel-mci.h | 46 -------------------------------------------- 2 files changed, 38 insertions(+), 47 deletions(-) delete mode 100644 include/linux/atmel-mci.h (limited to 'include/linux') diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 892d29fed9ec..6f815818dd22 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -29,7 +29,6 @@ #include #include -#include #include #include #include @@ -39,6 +38,8 @@ #include #include +#define ATMCI_MAX_NR_SLOTS 2 + /* * Superset of MCI IP registers integrated in Atmel AT91 Processor * Registers and bitfields marked with [2] are only available in MCI2 @@ -200,6 +201,42 @@ enum atmci_pdc_buf { PDC_SECOND_BUF, }; +/** + * struct mci_slot_pdata - board-specific per-slot configuration + * @bus_width: Number of data lines wired up the slot + * @detect_pin: GPIO pin wired to the card detect switch + * @wp_pin: GPIO pin wired to the write protect sensor + * @detect_is_active_high: The state of the detect pin when it is active + * @non_removable: The slot is not removable, only detect once + * + * If a given slot is not present on the board, @bus_width should be + * set to 0. The other fields are ignored in this case. + * + * Any pins that aren't available should be set to a negative value. + * + * Note that support for multiple slots is experimental -- some cards + * might get upset if we don't get the clock management exactly right. + * But in most cases, it should work just fine. + */ +struct mci_slot_pdata { + unsigned int bus_width; + struct gpio_desc *detect_pin; + struct gpio_desc *wp_pin; + bool detect_is_active_high; + bool non_removable; +}; + +/** + * struct mci_platform_data - board-specific MMC/SDcard configuration + * @dma_slave: DMA slave interface to use in data transfers. + * @slot: Per-slot configuration data. + */ +struct mci_platform_data { + void *dma_slave; + dma_filter_fn dma_filter; + struct mci_slot_pdata slot[ATMCI_MAX_NR_SLOTS]; +}; + struct atmel_mci_caps { bool has_dma_conf_reg; bool has_pdc; diff --git a/include/linux/atmel-mci.h b/include/linux/atmel-mci.h deleted file mode 100644 index 017e7d8f6126..000000000000 --- a/include/linux/atmel-mci.h +++ /dev/null @@ -1,46 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __LINUX_ATMEL_MCI_H -#define __LINUX_ATMEL_MCI_H - -#include -#include - -#define ATMCI_MAX_NR_SLOTS 2 - -/** - * struct mci_slot_pdata - board-specific per-slot configuration - * @bus_width: Number of data lines wired up the slot - * @detect_pin: GPIO pin wired to the card detect switch - * @wp_pin: GPIO pin wired to the write protect sensor - * @detect_is_active_high: The state of the detect pin when it is active - * @non_removable: The slot is not removable, only detect once - * - * If a given slot is not present on the board, @bus_width should be - * set to 0. The other fields are ignored in this case. - * - * Any pins that aren't available should be set to a negative value. - * - * Note that support for multiple slots is experimental -- some cards - * might get upset if we don't get the clock management exactly right. - * But in most cases, it should work just fine. - */ -struct mci_slot_pdata { - unsigned int bus_width; - struct gpio_desc *detect_pin; - struct gpio_desc *wp_pin; - bool detect_is_active_high; - bool non_removable; -}; - -/** - * struct mci_platform_data - board-specific MMC/SDcard configuration - * @dma_slave: DMA slave interface to use in data transfers. - * @slot: Per-slot configuration data. - */ -struct mci_platform_data { - void *dma_slave; - dma_filter_fn dma_filter; - struct mci_slot_pdata slot[ATMCI_MAX_NR_SLOTS]; -}; - -#endif /* __LINUX_ATMEL_MCI_H */ -- cgit v1.2.3