From bd94c4077a0b2ecc35562c294f80f3659ecd8499 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 28 Oct 2015 12:46:05 +0900 Subject: serial: support 16-bit register interface for console Currently, 8-bit (MMIO) and 32-bit (MMIO32) register interfaces are supported for the 8250 console, but the 16-bit (MMIO16) is not. The 8250 UART device on my board is connected to a 16-bit bus and my main motivation is to use earlycon with it. (Refer to arch/arm/boot/dts/uniphier-support-card.dtsi) Signed-off-by: Masahiro Yamada Reviewed-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 297d4fa1cfe5..35aa87b96b71 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -150,6 +150,7 @@ struct uart_port { #define UPIO_AU (SERIAL_IO_AU) /* Au1x00 and RT288x type IO */ #define UPIO_TSI (SERIAL_IO_TSI) /* Tsi108/109 type IO */ #define UPIO_MEM32BE (SERIAL_IO_MEM32BE) /* 32b big endian */ +#define UPIO_MEM16 (SERIAL_IO_MEM16) /* 16b little endian */ unsigned int read_status_mask; /* driver specific */ unsigned int ignore_status_mask; /* driver specific */ -- cgit v1.2.3 From 998b4a4571b87eb6795863e07683fa5d4e0398ba Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sun, 8 Nov 2015 13:01:08 -0500 Subject: tty: Improve tty_debug() macro Incorporate suggestions for tty core debug macro improvements - printk(KERN_DEBUG) => pr_debug() - ##args => ##__VA_ARGS__ - remove do {} while() - output tty_name() first cc: Joe Perches Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- include/linux/tty.h | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/tty.h b/include/linux/tty.h index 5e31f1b99037..3695c884258a 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -667,10 +667,7 @@ static inline void proc_tty_register_driver(struct tty_driver *d) {} static inline void proc_tty_unregister_driver(struct tty_driver *d) {} #endif -#define tty_debug(tty, f, args...) \ - do { \ - printk(KERN_DEBUG "%s: %s: " f, __func__, \ - tty_name(tty), ##args); \ - } while (0) +#define tty_debug(tty, f, ...) \ + pr_debug("%s: %s: " f, tty_name(tty), __func__, ##__VA_ARGS__) #endif -- cgit v1.2.3 From 82b8f888e99c81c609710901d8defbc8eff13f79 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sun, 8 Nov 2015 13:01:09 -0500 Subject: tty: Make tty_paranoia_check() file scope tty_paranoia_check() is only used within drivers/tty/tty_io.c; remove extern declaration in header and limit symbol to file scope. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_io.c | 2 +- include/linux/tty.h | 2 -- 2 files changed, 1 insertion(+), 3 deletions(-) (limited to 'include/linux') diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index bcc8e1e8bb72..adc0229f6b5d 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -256,7 +256,7 @@ const char *tty_name(const struct tty_struct *tty) EXPORT_SYMBOL(tty_name); -int tty_paranoia_check(struct tty_struct *tty, struct inode *inode, +static int tty_paranoia_check(struct tty_struct *tty, struct inode *inode, const char *routine) { #ifdef TTY_PARANOIA_CHECK diff --git a/include/linux/tty.h b/include/linux/tty.h index 3695c884258a..0532465ea142 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -419,8 +419,6 @@ static inline struct tty_struct *tty_kref_get(struct tty_struct *tty) return tty; } -extern int tty_paranoia_check(struct tty_struct *tty, struct inode *inode, - const char *routine); extern const char *tty_name(const struct tty_struct *tty); extern void tty_wait_until_sent(struct tty_struct *tty, long timeout); extern int __tty_check_change(struct tty_struct *tty, int sig); -- cgit v1.2.3 From 0a083eddae33b6e20234d05a9cf54f87b0095511 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sun, 8 Nov 2015 13:01:12 -0500 Subject: tty: core: Add helper fn to deref tty driver name Similar to tty_name(), add tty_driver_name() helper to safely dereference tty->driver->name (otherwise return empty string). Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_io.c | 7 +++++++ include/linux/tty.h | 1 + 2 files changed, 8 insertions(+) (limited to 'include/linux') diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 336714cf370a..ef8ee34670c3 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -256,6 +256,13 @@ const char *tty_name(const struct tty_struct *tty) EXPORT_SYMBOL(tty_name); +const char *tty_driver_name(const struct tty_struct *tty) +{ + if (!tty || !tty->driver) + return ""; + return tty->driver->name; +} + static int tty_paranoia_check(struct tty_struct *tty, struct inode *inode, const char *routine) { diff --git a/include/linux/tty.h b/include/linux/tty.h index 0532465ea142..a9c1af990da9 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -420,6 +420,7 @@ static inline struct tty_struct *tty_kref_get(struct tty_struct *tty) } extern const char *tty_name(const struct tty_struct *tty); +extern const char *tty_driver_name(const struct tty_struct *tty); extern void tty_wait_until_sent(struct tty_struct *tty, long timeout); extern int __tty_check_change(struct tty_struct *tty, int sig); extern int tty_check_change(struct tty_struct *tty); -- cgit v1.2.3 From 339f36ba14cf9f8fcf6e6b78385bd6811ec59fbe Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sun, 8 Nov 2015 13:01:13 -0500 Subject: tty: Define tty_*() printk macros Since not all ttys are devices (eg., SysV ptys), dev_*() printk macros cannot be used. Define tty_*() printk macros that output in similar format to dev_*() macros (ie., : .....). Transform the most-trivial printk( LEVEL ...) usage to tty_*() usage. NB: The function name has been eliminated from messages with unique context, or prefixed to the format when given. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_tty.c | 7 ++----- drivers/tty/tty_io.c | 27 ++++++++++----------------- drivers/tty/tty_port.c | 9 ++++----- include/linux/tty.h | 12 +++++++++++- 4 files changed, 27 insertions(+), 28 deletions(-) (limited to 'include/linux') diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index ed776149261e..c37c15d2f782 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1201,9 +1201,7 @@ static void n_tty_receive_overrun(struct tty_struct *tty) ldata->num_overrun++; if (time_after(jiffies, ldata->overrun_time + HZ) || time_after(ldata->overrun_time, jiffies)) { - printk(KERN_WARNING "%s: %d input overrun(s)\n", - tty_name(tty), - ldata->num_overrun); + tty_warn(tty, "%d input overrun(s)\n", ldata->num_overrun); ldata->overrun_time = jiffies; ldata->num_overrun = 0; } @@ -1486,8 +1484,7 @@ n_tty_receive_char_flagged(struct tty_struct *tty, unsigned char c, char flag) n_tty_receive_overrun(tty); break; default: - printk(KERN_ERR "%s: unknown flag %d\n", - tty_name(tty), flag); + tty_err(tty, "unknown flag %d\n", flag); break; } } diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index ef8ee34670c3..c9d3989b1f14 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -300,9 +300,8 @@ static int check_tty_count(struct tty_struct *tty, const char *routine) tty->link && tty->link->count) count++; if (tty->count != count) { - printk(KERN_WARNING "Warning: dev (%s) tty->count(%d) " - "!= #fd's(%d) in %s\n", - tty->name, tty->count, count, routine); + tty_warn(tty, "%s: tty->count(%d) != #fd's(%d)\n", + routine, tty->count, count); return count; } #endif @@ -427,10 +426,8 @@ int __tty_check_change(struct tty_struct *tty, int sig) } rcu_read_unlock(); - if (!tty_pgrp) { - pr_warn("%s: tty_check_change: sig=%d, tty->pgrp == NULL!\n", - tty_name(tty), sig); - } + if (!tty_pgrp) + tty_warn(tty, "sig=%d, tty->pgrp == NULL!\n", sig); return ret; } @@ -1246,8 +1243,7 @@ static ssize_t tty_write(struct file *file, const char __user *buf, return -EIO; /* Short term debug to catch buggy drivers */ if (tty->ops->write_room == NULL) - printk(KERN_ERR "tty driver %s lacks a write_room method.\n", - tty->driver->name); + tty_err(tty, "missing write_room method\n"); ld = tty_ldisc_ref_wait(tty); if (!ld->ops->write) ret = -EIO; @@ -1568,8 +1564,8 @@ err_module_put: /* call the tty release_tty routine to clean out this slot */ err_release_tty: tty_unlock(tty); - printk_ratelimited(KERN_INFO "tty_init_dev: ldisc open failed, " - "clearing slot %d\n", idx); + tty_info_ratelimited(tty, "ldisc open failed (%d), clearing slot %d\n", + retval, idx); release_tty(tty, idx); return ERR_PTR(retval); } @@ -1842,8 +1838,7 @@ int tty_release(struct inode *inode, struct file *filp) if (once) { once = 0; - printk(KERN_WARNING "%s: %s: read/write wait queue active!\n", - __func__, tty_name(tty)); + tty_warn(tty, "read/write wait queue active!\n"); } schedule_timeout_killable(timeout); if (timeout < 120 * HZ) @@ -1854,14 +1849,12 @@ int tty_release(struct inode *inode, struct file *filp) if (o_tty) { if (--o_tty->count < 0) { - printk(KERN_WARNING "%s: bad pty slave count (%d) for %s\n", - __func__, o_tty->count, tty_name(o_tty)); + tty_warn(tty, "bad slave count (%d)\n", o_tty->count); o_tty->count = 0; } } if (--tty->count < 0) { - printk(KERN_WARNING "%s: bad tty->count (%d) for %s\n", - __func__, tty->count, tty_name(tty)); + tty_warn(tty, "bad tty->count (%d)\n", tty->count); tty->count = 0; } diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c index 482f33f20043..846ed481c24f 100644 --- a/drivers/tty/tty_port.c +++ b/drivers/tty/tty_port.c @@ -462,14 +462,13 @@ int tty_port_close_start(struct tty_port *port, spin_lock_irqsave(&port->lock, flags); if (tty->count == 1 && port->count != 1) { - printk(KERN_WARNING - "tty_port_close_start: tty->count = 1 port count = %d.\n", - port->count); + tty_warn(tty, "%s: tty->count = 1 port count = %d\n", __func__, + port->count); port->count = 1; } if (--port->count < 0) { - printk(KERN_WARNING "tty_port_close_start: count = %d\n", - port->count); + tty_warn(tty, "%s: bad port count (%d)\n", __func__, + port->count); port->count = 0; } diff --git a/include/linux/tty.h b/include/linux/tty.h index a9c1af990da9..f578e8405ff0 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -666,7 +666,17 @@ static inline void proc_tty_register_driver(struct tty_driver *d) {} static inline void proc_tty_unregister_driver(struct tty_driver *d) {} #endif +#define tty_msg(fn, tty, f, ...) \ + fn("%s %s: " f, tty_driver_name(tty), tty_name(tty), ##__VA_ARGS__) + #define tty_debug(tty, f, ...) \ - pr_debug("%s: %s: " f, tty_name(tty), __func__, ##__VA_ARGS__) + tty_msg(pr_debug, tty, "%s:" f, __func__, ##__VA_ARGS__) +#define tty_info(tty, f, ...) tty_msg(pr_info, tty, f, ##__VA_ARGS__) +#define tty_notice(tty, f, ...) tty_msg(pr_notice, tty, f, ##__VA_ARGS__) +#define tty_warn(tty, f, ...) tty_msg(pr_warn, tty, f, ##__VA_ARGS__) +#define tty_err(tty, f, ...) tty_msg(pr_err, tty, f, ##__VA_ARGS__) + +#define tty_info_ratelimited(tty, f, ...) \ + tty_msg(pr_info_ratelimited, tty, f, ##__VA_ARGS__) #endif -- cgit v1.2.3 From d435cefe9cbc9308cac8d4b19069a572e2bd1558 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sun, 8 Nov 2015 13:01:19 -0500 Subject: tty: Remove __func__ from tty_debug() macro Now that tty_debug() macro uses pr_debug(), the function name can be printed when using dynamic debug; printing the function name within the format string is redundant. Remove the __func__ parameter and print specifier from the format string. Add context to messages for when the function name is not printed by dynamic debug, or when dynamic debug is not enabled. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/pty.c | 2 +- drivers/tty/tty_io.c | 14 +++++++------- drivers/tty/tty_ioctl.c | 2 +- include/linux/tty.h | 3 +-- 4 files changed, 10 insertions(+), 11 deletions(-) (limited to 'include/linux') diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index a45660f62db5..b3110040164a 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -788,7 +788,7 @@ static int ptmx_open(struct inode *inode, struct file *filp) if (retval) goto err_release; - tty_debug_hangup(tty, "(tty count=%d)\n", tty->count); + tty_debug_hangup(tty, "opening (count=%d)\n", tty->count); tty_unlock(tty); return 0; diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index d9df15f1086b..f8e1fce9bdfd 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -783,7 +783,7 @@ static void do_tty_hangup(struct work_struct *work) void tty_hangup(struct tty_struct *tty) { - tty_debug_hangup(tty, "\n"); + tty_debug_hangup(tty, "hangup\n"); schedule_work(&tty->hangup_work); } @@ -800,7 +800,7 @@ EXPORT_SYMBOL(tty_hangup); void tty_vhangup(struct tty_struct *tty) { - tty_debug_hangup(tty, "\n"); + tty_debug_hangup(tty, "vhangup\n"); __tty_hangup(tty, 0); } @@ -837,7 +837,7 @@ void tty_vhangup_self(void) static void tty_vhangup_session(struct tty_struct *tty) { - tty_debug_hangup(tty, "\n"); + tty_debug_hangup(tty, "session hangup\n"); __tty_hangup(tty, 1); } @@ -1787,7 +1787,7 @@ int tty_release(struct inode *inode, struct file *filp) return 0; } - tty_debug_hangup(tty, "(tty count=%d)...\n", tty->count); + tty_debug_hangup(tty, "releasing (count=%d)\n", tty->count); if (tty->ops->close) tty->ops->close(tty, filp); @@ -1903,7 +1903,7 @@ int tty_release(struct inode *inode, struct file *filp) /* Wait for pending work before tty destruction commmences */ tty_flush_works(tty); - tty_debug_hangup(tty, "freeing structure...\n"); + tty_debug_hangup(tty, "freeing structure\n"); /* * The release_tty function takes care of the details of clearing * the slots and preserving the termios structure. The tty_unlock_pair @@ -2093,7 +2093,7 @@ retry_open: tty->driver->subtype == PTY_TYPE_MASTER) noctty = 1; - tty_debug_hangup(tty, "(tty count=%d)\n", tty->count); + tty_debug_hangup(tty, "opening (count=%d)\n", tty->count); if (tty->ops->open) retval = tty->ops->open(tty, filp); @@ -2102,7 +2102,7 @@ retry_open: filp->f_flags = saved_flags; if (retval) { - tty_debug_hangup(tty, "error %d, releasing...\n", retval); + tty_debug_hangup(tty, "open error %d, releasing\n", retval); tty_unlock(tty); /* need to call tty_release without BTM */ tty_release(inode, filp); diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 40964eaf115f..0ea351388724 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -216,7 +216,7 @@ int tty_unthrottle_safe(struct tty_struct *tty) void tty_wait_until_sent(struct tty_struct *tty, long timeout) { - tty_debug_wait_until_sent(tty, "\n"); + tty_debug_wait_until_sent(tty, "wait until sent, timeout=%ld\n", timeout); if (!timeout) timeout = MAX_SCHEDULE_TIMEOUT; diff --git a/include/linux/tty.h b/include/linux/tty.h index f578e8405ff0..f06dd7a41a03 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -669,8 +669,7 @@ static inline void proc_tty_unregister_driver(struct tty_driver *d) {} #define tty_msg(fn, tty, f, ...) \ fn("%s %s: " f, tty_driver_name(tty), tty_name(tty), ##__VA_ARGS__) -#define tty_debug(tty, f, ...) \ - tty_msg(pr_debug, tty, "%s:" f, __func__, ##__VA_ARGS__) +#define tty_debug(tty, f, ...) tty_msg(pr_debug, tty, f, ##__VA_ARGS__) #define tty_info(tty, f, ...) tty_msg(pr_info, tty, f, ##__VA_ARGS__) #define tty_notice(tty, f, ...) tty_msg(pr_notice, tty, f, ##__VA_ARGS__) #define tty_warn(tty, f, ...) tty_msg(pr_warn, tty, f, ##__VA_ARGS__) -- cgit v1.2.3 From 4de91ebcc788f81d2a974d91208f5560ddf36378 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Sun, 8 Nov 2015 09:18:31 -0500 Subject: tty: Remove dead tty_write_flush() declaration and macro tty_write_flush() has no definition and the TTY_WRITE_FLUSH() macro is never invoked; remove. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- include/linux/tty.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/tty.h b/include/linux/tty.h index f06dd7a41a03..2fd8708ea888 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -345,8 +345,6 @@ struct tty_file_private { #define TTY_HUPPED 18 /* Post driver->hangup() */ #define TTY_LDISC_HALTED 22 /* Line discipline is halted */ -#define TTY_WRITE_FLUSH(tty) tty_write_flush((tty)) - /* Values for tty->flow_change */ #define TTY_THROTTLE_SAFE 1 #define TTY_UNTHROTTLE_SAFE 2 @@ -395,8 +393,6 @@ static inline int __init tty_init(void) { return 0; } #endif -extern void tty_write_flush(struct tty_struct *); - extern struct ktermios tty_std_termios; extern int vcs_init(void); -- cgit v1.2.3 From d1b5c87fa8058a3f477ae05555916dd1cea934ad Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 16 Nov 2015 16:48:12 +0100 Subject: serial: remove NWP serial support The NWP serial driver is no longer needed, as the two users of this hardware have migrated to a much faster generation hardware, see https://en.wikipedia.org/wiki/QPACE2 for the replacement. Signed-off-by: Arnd Bergmann Cc: Benjamin Krill Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 19 +- drivers/tty/serial/Makefile | 1 - drivers/tty/serial/nwpserial.c | 477 --------------------------------------- drivers/tty/serial/of_serial.c | 14 -- include/linux/nwpserial.h | 18 -- include/uapi/linux/serial_core.h | 2 +- 6 files changed, 2 insertions(+), 529 deletions(-) delete mode 100644 drivers/tty/serial/nwpserial.c delete mode 100644 include/linux/nwpserial.h (limited to 'include/linux') diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index f0bbedf61cae..643fc50bb741 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1099,7 +1099,7 @@ config SERIAL_NETX_CONSOLE config SERIAL_OF_PLATFORM tristate "Serial port on Open Firmware platform bus" depends on OF - depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL + depends on SERIAL_8250 help If you have a PowerPC based system that has serial ports on a platform specific bus, you should enable this option. @@ -1133,23 +1133,6 @@ config SERIAL_OMAP_CONSOLE your boot loader about how to pass options to the kernel at boot time.) -config SERIAL_OF_PLATFORM_NWPSERIAL - tristate "NWP serial port driver" - depends on PPC_DCR - select SERIAL_OF_PLATFORM - select SERIAL_CORE_CONSOLE - select SERIAL_CORE - help - This driver supports the cell network processor nwp serial - device. - -config SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE - bool "Console on NWP serial port" - depends on SERIAL_OF_PLATFORM_NWPSERIAL=y - select SERIAL_CORE_CONSOLE - help - Support for Console on the NWP serial ports. - config SERIAL_LANTIQ bool "Lantiq serial driver" depends on LANTIQ diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 5ab41119b3dc..ee8893317433 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -64,7 +64,6 @@ obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o obj-$(CONFIG_SERIAL_MSM) += msm_serial.o obj-$(CONFIG_SERIAL_NETX) += netx-serial.o obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o -obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o obj-$(CONFIG_SERIAL_KGDB_NMI) += kgdb_nmi.o obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o diff --git a/drivers/tty/serial/nwpserial.c b/drivers/tty/serial/nwpserial.c deleted file mode 100644 index 5da7622e88c3..000000000000 --- a/drivers/tty/serial/nwpserial.c +++ /dev/null @@ -1,477 +0,0 @@ -/* - * Serial Port driver for a NWP uart device - * - * Copyright (C) 2008 IBM Corp., Benjamin Krill - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define NWPSERIAL_NR 2 - -#define NWPSERIAL_STATUS_RXVALID 0x1 -#define NWPSERIAL_STATUS_TXFULL 0x2 - -struct nwpserial_port { - struct uart_port port; - dcr_host_t dcr_host; - unsigned int ier; - unsigned int mcr; -}; - -static DEFINE_MUTEX(nwpserial_mutex); -static struct nwpserial_port nwpserial_ports[NWPSERIAL_NR]; - -static void wait_for_bits(struct nwpserial_port *up, int bits) -{ - unsigned int status, tmout = 10000; - - /* Wait up to 10ms for the character(s) to be sent. */ - do { - status = dcr_read(up->dcr_host, UART_LSR); - - if (--tmout == 0) - break; - udelay(1); - } while ((status & bits) != bits); -} - -#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE -static void nwpserial_console_putchar(struct uart_port *port, int c) -{ - struct nwpserial_port *up; - up = container_of(port, struct nwpserial_port, port); - /* check if tx buffer is full */ - wait_for_bits(up, UART_LSR_THRE); - dcr_write(up->dcr_host, UART_TX, c); - up->port.icount.tx++; -} - -static void -nwpserial_console_write(struct console *co, const char *s, unsigned int count) -{ - struct nwpserial_port *up = &nwpserial_ports[co->index]; - unsigned long flags; - int locked = 1; - - if (oops_in_progress) - locked = spin_trylock_irqsave(&up->port.lock, flags); - else - spin_lock_irqsave(&up->port.lock, flags); - - /* save and disable interrupt */ - up->ier = dcr_read(up->dcr_host, UART_IER); - dcr_write(up->dcr_host, UART_IER, up->ier & ~UART_IER_RDI); - - uart_console_write(&up->port, s, count, nwpserial_console_putchar); - - /* wait for transmitter to become empty */ - while ((dcr_read(up->dcr_host, UART_LSR) & UART_LSR_THRE) == 0) - cpu_relax(); - - /* restore interrupt state */ - dcr_write(up->dcr_host, UART_IER, up->ier); - - if (locked) - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static struct uart_driver nwpserial_reg; -static struct console nwpserial_console = { - .name = "ttySQ", - .write = nwpserial_console_write, - .device = uart_console_device, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &nwpserial_reg, -}; -#define NWPSERIAL_CONSOLE (&nwpserial_console) -#else -#define NWPSERIAL_CONSOLE NULL -#endif /* CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE */ - -/**************************************************************************/ - -static int nwpserial_request_port(struct uart_port *port) -{ - return 0; -} - -static void nwpserial_release_port(struct uart_port *port) -{ - /* N/A */ -} - -static void nwpserial_config_port(struct uart_port *port, int flags) -{ - port->type = PORT_NWPSERIAL; -} - -static irqreturn_t nwpserial_interrupt(int irq, void *dev_id) -{ - struct nwpserial_port *up = dev_id; - struct tty_port *port = &up->port.state->port; - irqreturn_t ret; - unsigned int iir; - unsigned char ch; - - spin_lock(&up->port.lock); - - /* check if the uart was the interrupt source. */ - iir = dcr_read(up->dcr_host, UART_IIR); - if (!iir) { - ret = IRQ_NONE; - goto out; - } - - do { - up->port.icount.rx++; - ch = dcr_read(up->dcr_host, UART_RX); - if (up->port.ignore_status_mask != NWPSERIAL_STATUS_RXVALID) - tty_insert_flip_char(port, ch, TTY_NORMAL); - } while (dcr_read(up->dcr_host, UART_LSR) & UART_LSR_DR); - - spin_unlock(&up->port.lock); - tty_flip_buffer_push(port); - spin_lock(&up->port.lock); - - ret = IRQ_HANDLED; - - /* clear interrupt */ - dcr_write(up->dcr_host, UART_IIR, 1); -out: - spin_unlock(&up->port.lock); - return ret; -} - -static int nwpserial_startup(struct uart_port *port) -{ - struct nwpserial_port *up; - int err; - - up = container_of(port, struct nwpserial_port, port); - - /* disable flow control by default */ - up->mcr = dcr_read(up->dcr_host, UART_MCR) & ~UART_MCR_AFE; - dcr_write(up->dcr_host, UART_MCR, up->mcr); - - /* register interrupt handler */ - err = request_irq(up->port.irq, nwpserial_interrupt, - IRQF_SHARED, "nwpserial", up); - if (err) - return err; - - /* enable interrupts */ - up->ier = UART_IER_RDI; - dcr_write(up->dcr_host, UART_IER, up->ier); - - /* enable receiving */ - up->port.ignore_status_mask &= ~NWPSERIAL_STATUS_RXVALID; - - return 0; -} - -static void nwpserial_shutdown(struct uart_port *port) -{ - struct nwpserial_port *up; - up = container_of(port, struct nwpserial_port, port); - - /* disable receiving */ - up->port.ignore_status_mask |= NWPSERIAL_STATUS_RXVALID; - - /* disable interrupts from this port */ - up->ier = 0; - dcr_write(up->dcr_host, UART_IER, up->ier); - - /* free irq */ - free_irq(up->port.irq, up); -} - -static int nwpserial_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - return -EINVAL; -} - -static const char *nwpserial_type(struct uart_port *port) -{ - return port->type == PORT_NWPSERIAL ? "nwpserial" : NULL; -} - -static void nwpserial_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) -{ - struct nwpserial_port *up; - up = container_of(port, struct nwpserial_port, port); - - up->port.read_status_mask = NWPSERIAL_STATUS_RXVALID - | NWPSERIAL_STATUS_TXFULL; - - up->port.ignore_status_mask = 0; - /* ignore all characters if CREAD is not set */ - if ((termios->c_cflag & CREAD) == 0) - up->port.ignore_status_mask |= NWPSERIAL_STATUS_RXVALID; - - /* Copy back the old hardware settings */ - if (old) - tty_termios_copy_hw(termios, old); -} - -static void nwpserial_break_ctl(struct uart_port *port, int ctl) -{ - /* N/A */ -} - -static void nwpserial_stop_rx(struct uart_port *port) -{ - struct nwpserial_port *up; - up = container_of(port, struct nwpserial_port, port); - /* don't forward any more data (like !CREAD) */ - up->port.ignore_status_mask = NWPSERIAL_STATUS_RXVALID; -} - -static void nwpserial_putchar(struct nwpserial_port *up, unsigned char c) -{ - /* check if tx buffer is full */ - wait_for_bits(up, UART_LSR_THRE); - dcr_write(up->dcr_host, UART_TX, c); - up->port.icount.tx++; -} - -static void nwpserial_start_tx(struct uart_port *port) -{ - struct nwpserial_port *up; - struct circ_buf *xmit; - up = container_of(port, struct nwpserial_port, port); - xmit = &up->port.state->xmit; - - if (port->x_char) { - nwpserial_putchar(up, up->port.x_char); - port->x_char = 0; - } - - while (!(uart_circ_empty(xmit) || uart_tx_stopped(&up->port))) { - nwpserial_putchar(up, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1); - } -} - -static unsigned int nwpserial_get_mctrl(struct uart_port *port) -{ - return 0; -} - -static void nwpserial_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - /* N/A */ -} - -static void nwpserial_stop_tx(struct uart_port *port) -{ - /* N/A */ -} - -static unsigned int nwpserial_tx_empty(struct uart_port *port) -{ - struct nwpserial_port *up; - unsigned long flags; - int ret; - up = container_of(port, struct nwpserial_port, port); - - spin_lock_irqsave(&up->port.lock, flags); - ret = dcr_read(up->dcr_host, UART_LSR); - spin_unlock_irqrestore(&up->port.lock, flags); - - return ret & UART_LSR_TEMT ? TIOCSER_TEMT : 0; -} - -static struct uart_ops nwpserial_pops = { - .tx_empty = nwpserial_tx_empty, - .set_mctrl = nwpserial_set_mctrl, - .get_mctrl = nwpserial_get_mctrl, - .stop_tx = nwpserial_stop_tx, - .start_tx = nwpserial_start_tx, - .stop_rx = nwpserial_stop_rx, - .break_ctl = nwpserial_break_ctl, - .startup = nwpserial_startup, - .shutdown = nwpserial_shutdown, - .set_termios = nwpserial_set_termios, - .type = nwpserial_type, - .release_port = nwpserial_release_port, - .request_port = nwpserial_request_port, - .config_port = nwpserial_config_port, - .verify_port = nwpserial_verify_port, -}; - -static struct uart_driver nwpserial_reg = { - .owner = THIS_MODULE, - .driver_name = "nwpserial", - .dev_name = "ttySQ", - .major = TTY_MAJOR, - .minor = 68, - .nr = NWPSERIAL_NR, - .cons = NWPSERIAL_CONSOLE, -}; - -int nwpserial_register_port(struct uart_port *port) -{ - struct nwpserial_port *up = NULL; - int ret = -1; - int i; - static int first = 1; - int dcr_len; - int dcr_base; - struct device_node *dn; - - mutex_lock(&nwpserial_mutex); - - dn = port->dev->of_node; - if (dn == NULL) - goto out; - - /* get dcr base. */ - dcr_base = dcr_resource_start(dn, 0); - - /* find matching entry */ - for (i = 0; i < NWPSERIAL_NR; i++) - if (nwpserial_ports[i].port.iobase == dcr_base) { - up = &nwpserial_ports[i]; - break; - } - - /* we didn't find a mtching entry, search for a free port */ - if (up == NULL) - for (i = 0; i < NWPSERIAL_NR; i++) - if (nwpserial_ports[i].port.type == PORT_UNKNOWN && - nwpserial_ports[i].port.iobase == 0) { - up = &nwpserial_ports[i]; - break; - } - - if (up == NULL) { - ret = -EBUSY; - goto out; - } - - if (first) - uart_register_driver(&nwpserial_reg); - first = 0; - - up->port.membase = port->membase; - up->port.irq = port->irq; - up->port.uartclk = port->uartclk; - up->port.fifosize = port->fifosize; - up->port.regshift = port->regshift; - up->port.iotype = port->iotype; - up->port.flags = port->flags; - up->port.mapbase = port->mapbase; - up->port.private_data = port->private_data; - - if (port->dev) - up->port.dev = port->dev; - - if (up->port.iobase != dcr_base) { - up->port.ops = &nwpserial_pops; - up->port.fifosize = 16; - - spin_lock_init(&up->port.lock); - - up->port.iobase = dcr_base; - dcr_len = dcr_resource_len(dn, 0); - - up->dcr_host = dcr_map(dn, dcr_base, dcr_len); - if (!DCR_MAP_OK(up->dcr_host)) { - printk(KERN_ERR "Cannot map DCR resources for NWPSERIAL"); - goto out; - } - } - - ret = uart_add_one_port(&nwpserial_reg, &up->port); - if (ret == 0) - ret = up->port.line; - -out: - mutex_unlock(&nwpserial_mutex); - - return ret; -} -EXPORT_SYMBOL(nwpserial_register_port); - -void nwpserial_unregister_port(int line) -{ - struct nwpserial_port *up = &nwpserial_ports[line]; - mutex_lock(&nwpserial_mutex); - uart_remove_one_port(&nwpserial_reg, &up->port); - - up->port.type = PORT_UNKNOWN; - - mutex_unlock(&nwpserial_mutex); -} -EXPORT_SYMBOL(nwpserial_unregister_port); - -#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE -static int __init nwpserial_console_init(void) -{ - struct nwpserial_port *up = NULL; - struct device_node *dn; - const char *name; - int dcr_base; - int dcr_len; - int i; - - /* search for a free port */ - for (i = 0; i < NWPSERIAL_NR; i++) - if (nwpserial_ports[i].port.type == PORT_UNKNOWN) { - up = &nwpserial_ports[i]; - break; - } - - if (up == NULL) - return -1; - - name = of_get_property(of_chosen, "linux,stdout-path", NULL); - if (name == NULL) - return -1; - - dn = of_find_node_by_path(name); - if (!dn) - return -1; - - spin_lock_init(&up->port.lock); - up->port.ops = &nwpserial_pops; - up->port.type = PORT_NWPSERIAL; - up->port.fifosize = 16; - - dcr_base = dcr_resource_start(dn, 0); - dcr_len = dcr_resource_len(dn, 0); - up->port.iobase = dcr_base; - - up->dcr_host = dcr_map(dn, dcr_base, dcr_len); - if (!DCR_MAP_OK(up->dcr_host)) { - printk("Cannot map DCR resources for SERIAL"); - return -1; - } - register_console(&nwpserial_console); - return 0; -} -console_initcall(nwpserial_console_init); -#endif /* CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE */ diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c index 6d002eeb2516..920468bf4e83 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/of_serial.c @@ -215,11 +215,6 @@ static int of_platform_serial_probe(struct platform_device *ofdev) ret = serial8250_register_8250_port(&port8250); break; } -#endif -#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL - case PORT_NWPSERIAL: - ret = nwpserial_register_port(&port); - break; #endif default: /* need to add code for these */ @@ -252,11 +247,6 @@ static int of_platform_serial_remove(struct platform_device *ofdev) case PORT_8250 ... PORT_MAX_8250: serial8250_unregister_port(info->line); break; -#endif -#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL - case PORT_NWPSERIAL: - nwpserial_unregister_port(info->line); - break; #endif default: /* need to add code for these */ @@ -356,10 +346,6 @@ static const struct of_device_id of_platform_serial_table[] = { .data = (void *)PORT_XSCALE, }, { .compatible = "mrvl,pxa-uart", .data = (void *)PORT_XSCALE, }, -#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL - { .compatible = "ibm,qpace-nwp-serial", - .data = (void *)PORT_NWPSERIAL, }, -#endif { /* end of list */ }, }; MODULE_DEVICE_TABLE(of, of_platform_serial_table); diff --git a/include/linux/nwpserial.h b/include/linux/nwpserial.h deleted file mode 100644 index 9acb21572eaf..000000000000 --- a/include/linux/nwpserial.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Serial Port driver for a NWP uart device - * - * Copyright (C) 2008 IBM Corp., Benjamin Krill - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ -#ifndef _NWPSERIAL_H -#define _NWPSERIAL_H - -int nwpserial_register_port(struct uart_port *port); -void nwpserial_unregister_port(int line); - -#endif /* _NWPSERIAL_H */ diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 93ba148f923e..3e5d757407fb 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -176,7 +176,7 @@ #define PORT_S3C6400 84 -/* NWPSERIAL */ +/* NWPSERIAL, now removed */ #define PORT_NWPSERIAL 85 /* MAX3100 */ -- cgit v1.2.3 From 7ec758718920e5e5876d0d02ece6855128c8eb1e Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 16 Nov 2015 17:40:57 +0000 Subject: tty: amba-pl011: add support for ZTE UART (EXPERIMENTAL) Add (incomplete) support for the ZTE UART to the AMBA PL011 driver. This is similar to the ARM and ST variants, except it has a different register address layout, and requires 32-bit accesses to the registers. Use the newly introduced register tables and access size support to cope with these differences. Signed-off-by: Russell King Reviewed-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/amba-pl011.c | 23 +++++++++++++++++++++++ include/linux/amba/serial.h | 18 ++++++++++++++++++ 2 files changed, 41 insertions(+) (limited to 'include/linux') diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index c8165b61dbf8..295f0be128f9 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -171,6 +171,29 @@ static struct vendor_data vendor_st = { .get_fifosize = get_fifosize_st, }; +static const u16 pl011_zte_offsets[REG_ARRAY_SIZE] = { + [REG_DR] = ZX_UART011_DR, + [REG_FR] = ZX_UART011_FR, + [REG_LCRH_RX] = ZX_UART011_LCRH, + [REG_LCRH_TX] = ZX_UART011_LCRH, + [REG_IBRD] = ZX_UART011_IBRD, + [REG_FBRD] = ZX_UART011_FBRD, + [REG_CR] = ZX_UART011_CR, + [REG_IFLS] = ZX_UART011_IFLS, + [REG_IMSC] = ZX_UART011_IMSC, + [REG_RIS] = ZX_UART011_RIS, + [REG_MIS] = ZX_UART011_MIS, + [REG_ICR] = ZX_UART011_ICR, + [REG_DMACR] = ZX_UART011_DMACR, +}; + +static struct vendor_data vendor_zte = { + .reg_offset = pl011_zte_offsets, + .access_32b = true, + .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, + .get_fifosize = get_fifosize_arm, +}; + /* Deals with DMA transactions */ struct pl011_sgbuf { diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h index 0ddb5c02ad8b..d76a19ba2cff 100644 --- a/include/linux/amba/serial.h +++ b/include/linux/amba/serial.h @@ -65,6 +65,24 @@ #define ST_UART011_ABCR 0x100 /* Autobaud control register. */ #define ST_UART011_ABIMSC 0x15C /* Autobaud interrupt mask/clear register. */ +/* + * ZTE UART register offsets. This UART has a radically different address + * allocation from the ARM and ST variants, so we list all registers here. + * We assume unlisted registers do not exist. + */ +#define ZX_UART011_DR 0x04 +#define ZX_UART011_FR 0x14 +#define ZX_UART011_IBRD 0x24 +#define ZX_UART011_FBRD 0x28 +#define ZX_UART011_LCRH 0x30 +#define ZX_UART011_CR 0x34 +#define ZX_UART011_IFLS 0x38 +#define ZX_UART011_IMSC 0x40 +#define ZX_UART011_RIS 0x44 +#define ZX_UART011_MIS 0x48 +#define ZX_UART011_ICR 0x4c +#define ZX_UART011_DMACR 0x50 + #define UART011_DR_OE (1 << 11) #define UART011_DR_BE (1 << 10) #define UART011_DR_PE (1 << 9) -- cgit v1.2.3 From 858965d909db32fb567a06916bbebdb8951cd39e Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Fri, 27 Nov 2015 21:29:24 -0500 Subject: serial: Fix UPIO_MEM comment The original semantics of UPIO_MEM did not include the notion of bitness and endianness; different drivers used UPIO_MEM to refer to their original mmio bitness/endianness. For example, for the 8250 driver this is 8-bit LE but for the amba-pl011 driver this is 16-bit LE. Since UPIO_* values are userspace ABI via TIOCGSERIAL/TIOCSSERIAL ioctls, the original meaning of UPIIO_MEM must remain as it was: the original mmio stride/width/endianness of the driver. Signed-off-by: Peter Hurley Acked-by: Timur Tabi Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 35aa87b96b71..e03d6ba5e5b4 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -145,7 +145,7 @@ struct uart_port { #define UPIO_PORT (SERIAL_IO_PORT) /* 8b I/O port access */ #define UPIO_HUB6 (SERIAL_IO_HUB6) /* Hub6 ISA card */ -#define UPIO_MEM (SERIAL_IO_MEM) /* 8b MMIO access */ +#define UPIO_MEM (SERIAL_IO_MEM) /* driver-specific */ #define UPIO_MEM32 (SERIAL_IO_MEM32) /* 32b little endian */ #define UPIO_AU (SERIAL_IO_AU) /* Au1x00 and RT288x type IO */ #define UPIO_TSI (SERIAL_IO_TSI) /* Tsi108/109 type IO */ -- cgit v1.2.3 From b8bbd6b2923279f1c9c74d59638b38a1eace78e8 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 12 Nov 2015 13:36:06 +0100 Subject: serial: sh-sci: Add BRG register definitions Add register definitions for the Baud Rate Generator for External Clock (BRG), as found in some SCIF and in HSCIF, including a new regtype for the "SH-4(A)"-derived SCIF variant with BRG. Signed-off-by: Geert Uytterhoeven Acked-by: Greg Kroah-Hartman --- drivers/tty/serial/sh-sci.c | 46 +++++++++++++++++++++++++++++++++++++++++++++ drivers/tty/serial/sh-sci.h | 10 ++++++++++ include/linux/serial_sci.h | 1 + 3 files changed, 57 insertions(+) (limited to 'include/linux') diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 5b120757c02a..fb5eac2e3182 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -161,6 +161,8 @@ static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [HSSRR] = sci_reg_invalid, [SCPCR] = sci_reg_invalid, [SCPDR] = sci_reg_invalid, + [SCDL] = sci_reg_invalid, + [SCCKS] = sci_reg_invalid, }, /* @@ -183,6 +185,8 @@ static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [HSSRR] = sci_reg_invalid, [SCPCR] = sci_reg_invalid, [SCPDR] = sci_reg_invalid, + [SCDL] = sci_reg_invalid, + [SCCKS] = sci_reg_invalid, }, /* @@ -204,6 +208,8 @@ static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [HSSRR] = sci_reg_invalid, [SCPCR] = { 0x30, 16 }, [SCPDR] = { 0x34, 16 }, + [SCDL] = sci_reg_invalid, + [SCCKS] = sci_reg_invalid, }, /* @@ -225,6 +231,8 @@ static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [HSSRR] = sci_reg_invalid, [SCPCR] = { 0x30, 16 }, [SCPDR] = { 0x34, 16 }, + [SCDL] = sci_reg_invalid, + [SCCKS] = sci_reg_invalid, }, /* @@ -247,6 +255,8 @@ static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [HSSRR] = sci_reg_invalid, [SCPCR] = sci_reg_invalid, [SCPDR] = sci_reg_invalid, + [SCDL] = sci_reg_invalid, + [SCCKS] = sci_reg_invalid, }, /* @@ -268,6 +278,8 @@ static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [HSSRR] = sci_reg_invalid, [SCPCR] = sci_reg_invalid, [SCPDR] = sci_reg_invalid, + [SCDL] = sci_reg_invalid, + [SCCKS] = sci_reg_invalid, }, /* @@ -289,6 +301,32 @@ static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [HSSRR] = sci_reg_invalid, [SCPCR] = sci_reg_invalid, [SCPDR] = sci_reg_invalid, + [SCDL] = sci_reg_invalid, + [SCCKS] = sci_reg_invalid, + }, + + /* + * Common SCIF definitions for ports with a Baud Rate Generator for + * External Clock (BRG). + */ + [SCIx_SH4_SCIF_BRG_REGTYPE] = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x0c, 8 }, + [SCxSR] = { 0x10, 16 }, + [SCxRDR] = { 0x14, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = { 0x20, 16 }, + [SCLSR] = { 0x24, 16 }, + [HSSRR] = sci_reg_invalid, + [SCPCR] = sci_reg_invalid, + [SCPDR] = sci_reg_invalid, + [SCDL] = { 0x30, 16 }, + [SCCKS] = { 0x34, 16 }, }, /* @@ -310,6 +348,8 @@ static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [HSSRR] = { 0x40, 16 }, [SCPCR] = sci_reg_invalid, [SCPDR] = sci_reg_invalid, + [SCDL] = { 0x30, 16 }, + [SCCKS] = { 0x34, 16 }, }, /* @@ -332,6 +372,8 @@ static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [HSSRR] = sci_reg_invalid, [SCPCR] = sci_reg_invalid, [SCPDR] = sci_reg_invalid, + [SCDL] = sci_reg_invalid, + [SCCKS] = sci_reg_invalid, }, /* @@ -354,6 +396,8 @@ static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [HSSRR] = sci_reg_invalid, [SCPCR] = sci_reg_invalid, [SCPDR] = sci_reg_invalid, + [SCDL] = sci_reg_invalid, + [SCCKS] = sci_reg_invalid, }, /* @@ -376,6 +420,8 @@ static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [HSSRR] = sci_reg_invalid, [SCPCR] = sci_reg_invalid, [SCPDR] = sci_reg_invalid, + [SCDL] = sci_reg_invalid, + [SCCKS] = sci_reg_invalid, }, }; diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h index bf69bbdcc1f9..fb1760250421 100644 --- a/drivers/tty/serial/sh-sci.h +++ b/drivers/tty/serial/sh-sci.h @@ -27,6 +27,8 @@ enum { HSSRR, /* Sampling Rate Register */ SCPCR, /* Serial Port Control Register */ SCPDR, /* Serial Port Data Register */ + SCDL, /* BRG Frequency Division Register */ + SCCKS, /* BRG Clock Select Register */ SCIx_NR_REGS, }; @@ -109,6 +111,14 @@ enum { #define SCPDR_RTSD BIT(4) /* Serial Port RTS Output Pin Data */ #define SCPDR_CTSD BIT(3) /* Serial Port CTS Input Pin Data */ +/* + * BRG Clock Select Register (Some SCIF and HSCIF) + * The Baud Rate Generator for external clock can provide a clock source for + * the sampling clock. It outputs either its frequency divided clock, or the + * (undivided) (H)SCK external clock. + */ +#define SCCKS_CKS BIT(15) /* Select (H)SCK (1) or divided SC_CLK (0) */ +#define SCCKS_XIN BIT(14) /* SC_CLK uses bus clock (1) or SCIF_CLK (0) */ #define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) #define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF) diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index 7c536ac5be05..9f2bfd055742 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -32,6 +32,7 @@ enum { SCIx_SH2_SCIF_FIFODATA_REGTYPE, SCIx_SH3_SCIF_REGTYPE, SCIx_SH4_SCIF_REGTYPE, + SCIx_SH4_SCIF_BRG_REGTYPE, SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, SCIx_SH4_SCIF_FIFODATA_REGTYPE, SCIx_SH7705_SCIF_REGTYPE, -- cgit v1.2.3