From 70bc126471af30bb115e635512dcf6d86fe6e29a Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Wed, 6 Mar 2013 08:20:52 -0500 Subject: tty: Add safe tty throttle/unthrottle functions The tty driver can become stuck throttled due to race conditions between throttle and unthrottle, when the decision to throttle or unthrottle is conditional. The following example helps to illustrate the race: CPU 0 | CPU 1 | if (condition A) | | | if (!condition A) | unthrottle() throttle() | | Note the converse is also possible; ie., CPU 0 | CPU 1 | | if (!condition A) | if (condition A) | throttle() | | unthrottle() | Add new throttle/unthrottle functions based on the familiar model of task state and schedule/wake. For example, while (1) { tty_set_flow_change(tty, TTY_THROTTLE_SAFE); if (!condition) break; if (!tty_throttle_safe(tty)) break; } __tty_set_flow_change(tty, 0); In this example, if an unthrottle occurs after the condition is evaluated but before tty_throttle_safe(), then tty_throttle_safe() will return non-zero, looping and forcing the re-evaluation of condition. Reported-by: Vincent Pillet Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- include/linux/tty.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'include/linux') diff --git a/include/linux/tty.h b/include/linux/tty.h index c75d886b0307..189ca80494d1 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -258,6 +258,7 @@ struct tty_struct { unsigned char warned:1; unsigned char ctrl_status; /* ctrl_lock */ unsigned int receive_room; /* Bytes free for queue */ + int flow_change; struct tty_struct *link; struct fasync_struct *fasync; @@ -318,6 +319,21 @@ struct tty_file_private { #define TTY_WRITE_FLUSH(tty) tty_write_flush((tty)) +/* Values for tty->flow_change */ +#define TTY_THROTTLE_SAFE 1 +#define TTY_UNTHROTTLE_SAFE 2 + +static inline void __tty_set_flow_change(struct tty_struct *tty, int val) +{ + tty->flow_change = val; +} + +static inline void tty_set_flow_change(struct tty_struct *tty, int val) +{ + tty->flow_change = val; + smp_mb(); +} + #ifdef CONFIG_TTY extern void console_init(void); extern void tty_kref_put(struct tty_struct *tty); @@ -400,6 +416,8 @@ extern int tty_write_room(struct tty_struct *tty); extern void tty_driver_flush_buffer(struct tty_struct *tty); extern void tty_throttle(struct tty_struct *tty); extern void tty_unthrottle(struct tty_struct *tty); +extern int tty_throttle_safe(struct tty_struct *tty); +extern int tty_unthrottle_safe(struct tty_struct *tty); extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws); extern void tty_driver_remove_tty(struct tty_driver *driver, struct tty_struct *tty); -- cgit v1.2.3 From 6be06e7273c4682a15ca1f4adf1aeae510823530 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Wed, 6 Mar 2013 08:38:21 -0500 Subject: tty: Fix checkpatch errors in tty_ldisc.h Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- include/linux/tty_ldisc.h | 132 +++++++++++++++++++++++----------------------- 1 file changed, 66 insertions(+), 66 deletions(-) (limited to 'include/linux') diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h index 455a0d7bf220..58390c73df8b 100644 --- a/include/linux/tty_ldisc.h +++ b/include/linux/tty_ldisc.h @@ -9,89 +9,89 @@ * * int (*open)(struct tty_struct *); * - * This function is called when the line discipline is associated - * with the tty. The line discipline can use this as an - * opportunity to initialize any state needed by the ldisc routines. - * + * This function is called when the line discipline is associated + * with the tty. The line discipline can use this as an + * opportunity to initialize any state needed by the ldisc routines. + * * void (*close)(struct tty_struct *); * * This function is called when the line discipline is being - * shutdown, either because the tty is being closed or because - * the tty is being changed to use a new line discipline - * + * shutdown, either because the tty is being closed or because + * the tty is being changed to use a new line discipline + * * void (*flush_buffer)(struct tty_struct *tty); * - * This function instructs the line discipline to clear its - * buffers of any input characters it may have queued to be - * delivered to the user mode process. - * + * This function instructs the line discipline to clear its + * buffers of any input characters it may have queued to be + * delivered to the user mode process. + * * ssize_t (*chars_in_buffer)(struct tty_struct *tty); * - * This function returns the number of input characters the line + * This function returns the number of input characters the line * discipline may have queued up to be delivered to the user mode * process. - * + * * ssize_t (*read)(struct tty_struct * tty, struct file * file, * unsigned char * buf, size_t nr); * - * This function is called when the user requests to read from - * the tty. The line discipline will return whatever characters - * it has buffered up for the user. If this function is not - * defined, the user will receive an EIO error. - * + * This function is called when the user requests to read from + * the tty. The line discipline will return whatever characters + * it has buffered up for the user. If this function is not + * defined, the user will receive an EIO error. + * * ssize_t (*write)(struct tty_struct * tty, struct file * file, - * const unsigned char * buf, size_t nr); - * - * This function is called when the user requests to write to the - * tty. The line discipline will deliver the characters to the - * low-level tty device for transmission, optionally performing - * some processing on the characters first. If this function is - * not defined, the user will receive an EIO error. - * + * const unsigned char * buf, size_t nr); + * + * This function is called when the user requests to write to the + * tty. The line discipline will deliver the characters to the + * low-level tty device for transmission, optionally performing + * some processing on the characters first. If this function is + * not defined, the user will receive an EIO error. + * * int (*ioctl)(struct tty_struct * tty, struct file * file, - * unsigned int cmd, unsigned long arg); + * unsigned int cmd, unsigned long arg); * * This function is called when the user requests an ioctl which - * is not handled by the tty layer or the low-level tty driver. - * It is intended for ioctls which affect line discpline - * operation. Note that the search order for ioctls is (1) tty - * layer, (2) tty low-level driver, (3) line discpline. So a - * low-level driver can "grab" an ioctl request before the line - * discpline has a chance to see it. - * + * is not handled by the tty layer or the low-level tty driver. + * It is intended for ioctls which affect line discpline + * operation. Note that the search order for ioctls is (1) tty + * layer, (2) tty low-level driver, (3) line discpline. So a + * low-level driver can "grab" an ioctl request before the line + * discpline has a chance to see it. + * * long (*compat_ioctl)(struct tty_struct * tty, struct file * file, - * unsigned int cmd, unsigned long arg); + * unsigned int cmd, unsigned long arg); * - * Process ioctl calls from 32-bit process on 64-bit system + * Process ioctl calls from 32-bit process on 64-bit system * * void (*set_termios)(struct tty_struct *tty, struct ktermios * old); * - * This function notifies the line discpline that a change has - * been made to the termios structure. - * + * This function notifies the line discpline that a change has + * been made to the termios structure. + * * int (*poll)(struct tty_struct * tty, struct file * file, - * poll_table *wait); + * poll_table *wait); * - * This function is called when a user attempts to select/poll on a - * tty device. It is solely the responsibility of the line - * discipline to handle poll requests. + * This function is called when a user attempts to select/poll on a + * tty device. It is solely the responsibility of the line + * discipline to handle poll requests. * * void (*receive_buf)(struct tty_struct *, const unsigned char *cp, - * char *fp, int count); - * - * This function is called by the low-level tty driver to send - * characters received by the hardware to the line discpline for - * processing. is a pointer to the buffer of input - * character received by the device. is a pointer to a - * pointer of flag bytes which indicate whether a character was - * received with a parity error, etc. - * + * char *fp, int count); + * + * This function is called by the low-level tty driver to send + * characters received by the hardware to the line discpline for + * processing. is a pointer to the buffer of input + * character received by the device. is a pointer to a + * pointer of flag bytes which indicate whether a character was + * received with a parity error, etc. + * * void (*write_wakeup)(struct tty_struct *); * - * This function is called by the low-level tty driver to signal - * that line discpline should try to send more characters to the - * low-level driver for transmission. If the line discpline does - * not have any more data to send, it can just return. + * This function is called by the low-level tty driver to signal + * that line discpline should try to send more characters to the + * low-level driver for transmission. If the line discpline does + * not have any more data to send, it can just return. * * int (*hangup)(struct tty_struct *) * @@ -115,7 +115,7 @@ struct tty_ldisc_ops { char *name; int num; int flags; - + /* * The following routines are called from above. */ @@ -123,19 +123,19 @@ struct tty_ldisc_ops { void (*close)(struct tty_struct *); void (*flush_buffer)(struct tty_struct *tty); ssize_t (*chars_in_buffer)(struct tty_struct *tty); - ssize_t (*read)(struct tty_struct * tty, struct file * file, - unsigned char __user * buf, size_t nr); - ssize_t (*write)(struct tty_struct * tty, struct file * file, - const unsigned char * buf, size_t nr); - int (*ioctl)(struct tty_struct * tty, struct file * file, + ssize_t (*read)(struct tty_struct *tty, struct file *file, + unsigned char __user *buf, size_t nr); + ssize_t (*write)(struct tty_struct *tty, struct file *file, + const unsigned char *buf, size_t nr); + int (*ioctl)(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); - long (*compat_ioctl)(struct tty_struct * tty, struct file * file, + long (*compat_ioctl)(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); - void (*set_termios)(struct tty_struct *tty, struct ktermios * old); + void (*set_termios)(struct tty_struct *tty, struct ktermios *old); unsigned int (*poll)(struct tty_struct *, struct file *, struct poll_table_struct *); int (*hangup)(struct tty_struct *tty); - + /* * The following routines are called from below. */ @@ -145,7 +145,7 @@ struct tty_ldisc_ops { void (*dcd_change)(struct tty_struct *, unsigned int); struct module *owner; - + int refcount; }; -- cgit v1.2.3 From 6865ff222ccab371c04afce17aec1f7d70b17dbc Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 7 Mar 2013 13:12:27 +0100 Subject: TTY: do not warn about setting speed via SPD_* The warning is there since 2.1.69 and we have not seen anybody reporting it in the past decade. Remove the warning now. tty_get_baud_rate can now be inline. This gives us one less EXPORT_SYMBOL. Signed-off-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_ioctl.c | 28 ---------------------------- include/linux/tty.h | 18 ++++++++++++++++-- 2 files changed, 16 insertions(+), 30 deletions(-) (limited to 'include/linux') diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 132d452578bb..28715e48b2f7 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -478,34 +478,6 @@ void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud, speed_t obaud) } EXPORT_SYMBOL_GPL(tty_encode_baud_rate); -/** - * tty_get_baud_rate - get tty bit rates - * @tty: tty to query - * - * Returns the baud rate as an integer for this terminal. The - * termios lock must be held by the caller and the terminal bit - * flags may be updated. - * - * Locking: none - */ - -speed_t tty_get_baud_rate(struct tty_struct *tty) -{ - speed_t baud = tty_termios_baud_rate(&tty->termios); - - if (baud == 38400 && tty->alt_speed) { - if (!tty->warned) { - printk(KERN_WARNING "Use of setserial/setrocket to " - "set SPD_* flags is deprecated\n"); - tty->warned = 1; - } - baud = tty->alt_speed; - } - - return baud; -} -EXPORT_SYMBOL(tty_get_baud_rate); - /** * tty_termios_copy_hw - copy hardware settings * @new: New termios diff --git a/include/linux/tty.h b/include/linux/tty.h index 189ca80494d1..63b62865c8e9 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -255,7 +255,6 @@ struct tty_struct { int count; struct winsize winsize; /* termios mutex */ unsigned char stopped:1, hw_stopped:1, flow_stopped:1, packet:1; - unsigned char warned:1; unsigned char ctrl_status; /* ctrl_lock */ unsigned int receive_room; /* Bytes free for queue */ int flow_change; @@ -437,13 +436,28 @@ extern void tty_flush_to_ldisc(struct tty_struct *tty); extern void tty_buffer_free_all(struct tty_port *port); extern void tty_buffer_flush(struct tty_struct *tty); extern void tty_buffer_init(struct tty_port *port); -extern speed_t tty_get_baud_rate(struct tty_struct *tty); extern speed_t tty_termios_baud_rate(struct ktermios *termios); extern speed_t tty_termios_input_baud_rate(struct ktermios *termios); extern void tty_termios_encode_baud_rate(struct ktermios *termios, speed_t ibaud, speed_t obaud); extern void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud, speed_t obaud); + +/** + * tty_get_baud_rate - get tty bit rates + * @tty: tty to query + * + * Returns the baud rate as an integer for this terminal. The + * termios lock must be held by the caller and the terminal bit + * flags may be updated. + * + * Locking: none + */ +static inline speed_t tty_get_baud_rate(struct tty_struct *tty) +{ + return tty_termios_baud_rate(&tty->termios); +} + extern void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old); extern int tty_termios_hw_change(struct ktermios *a, struct ktermios *b); extern int tty_set_termios(struct tty_struct *tty, struct ktermios *kt); -- cgit v1.2.3 From 6aad04f21374633bd8cecf25024553d1e11a9522 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 7 Mar 2013 13:12:29 +0100 Subject: TTY: add tty_port_tty_wakeup helper It allows for cleaning up on a considerable amount of places. They did port_get, wakeup, kref_put. Now the only thing needed is to call tty_port_tty_wakeup which does exactly that. One exception is ifx6x60 where tty_wakeup was open-coded. We now call tty_wakeup properly there. Signed-off-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- arch/um/drivers/line.c | 8 +------- drivers/isdn/capi/capi.c | 7 +------ drivers/isdn/gigaset/interface.c | 6 +----- drivers/net/usb/hso.c | 13 ++----------- drivers/s390/char/sclp_tty.c | 9 ++------- drivers/s390/char/sclp_vt220.c | 8 +------- drivers/staging/fwserial/fwserial.c | 10 ++-------- drivers/staging/serqt_usb2/serqt_usb2.c | 7 +------ drivers/tty/ehv_bytechan.c | 6 +----- drivers/tty/hvc/hvsi.c | 7 +------ drivers/tty/nozomi.c | 6 +----- drivers/tty/serial/ifx6x60.c | 33 ++------------------------------- drivers/tty/tty_port.c | 16 ++++++++++++++++ drivers/usb/class/cdc-acm.c | 7 +------ drivers/usb/serial/digi_acceleport.c | 17 +++-------------- drivers/usb/serial/io_edgeport.c | 28 +++++----------------------- drivers/usb/serial/keyspan_pda.c | 6 ++---- drivers/usb/serial/mos7720.c | 8 ++------ drivers/usb/serial/mos7840.c | 7 ++----- drivers/usb/serial/ti_usb_3410_5052.c | 7 ++----- drivers/usb/serial/usb-serial.c | 10 +--------- include/linux/tty.h | 1 + 22 files changed, 51 insertions(+), 176 deletions(-) (limited to 'include/linux') diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c index f1b38571f94e..cc206eda245c 100644 --- a/arch/um/drivers/line.c +++ b/arch/um/drivers/line.c @@ -248,7 +248,6 @@ static irqreturn_t line_write_interrupt(int irq, void *data) { struct chan *chan = data; struct line *line = chan->line; - struct tty_struct *tty; int err; /* @@ -267,12 +266,7 @@ static irqreturn_t line_write_interrupt(int irq, void *data) } spin_unlock(&line->lock); - tty = tty_port_tty_get(&line->port); - if (tty == NULL) - return IRQ_NONE; - - tty_wakeup(tty); - tty_kref_put(tty); + tty_port_tty_wakeup(&line->port); return IRQ_HANDLED; } diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c index 89562a845f6a..ac6f72b455d1 100644 --- a/drivers/isdn/capi/capi.c +++ b/drivers/isdn/capi/capi.c @@ -569,7 +569,6 @@ static void capi_recv_message(struct capi20_appl *ap, struct sk_buff *skb) { struct capidev *cdev = ap->private; #ifdef CONFIG_ISDN_CAPI_MIDDLEWARE - struct tty_struct *tty; struct capiminor *mp; u16 datahandle; struct capincci *np; @@ -627,11 +626,7 @@ static void capi_recv_message(struct capi20_appl *ap, struct sk_buff *skb) CAPIMSG_U16(skb->data, CAPIMSG_BASELEN + 4 + 2)); kfree_skb(skb); capiminor_del_ack(mp, datahandle); - tty = tty_port_tty_get(&mp->port); - if (tty) { - tty_wakeup(tty); - tty_kref_put(tty); - } + tty_port_tty_wakeup(&mp->port); handle_minor_send(mp); } else { diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c index e2b539675b66..600c79b030cd 100644 --- a/drivers/isdn/gigaset/interface.c +++ b/drivers/isdn/gigaset/interface.c @@ -487,12 +487,8 @@ static const struct tty_operations if_ops = { static void if_wake(unsigned long data) { struct cardstate *cs = (struct cardstate *)data; - struct tty_struct *tty = tty_port_tty_get(&cs->port); - if (tty) { - tty_wakeup(tty); - tty_kref_put(tty); - } + tty_port_tty_wakeup(&cs->port); } /*** interface to common ***/ diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index e2dd3249b6bd..a7714b4f29ad 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -1925,7 +1925,6 @@ static void hso_std_serial_write_bulk_callback(struct urb *urb) { struct hso_serial *serial = urb->context; int status = urb->status; - struct tty_struct *tty; /* sanity check */ if (!serial) { @@ -1941,11 +1940,7 @@ static void hso_std_serial_write_bulk_callback(struct urb *urb) return; } hso_put_activity(serial->parent); - tty = tty_port_tty_get(&serial->port); - if (tty) { - tty_wakeup(tty); - tty_kref_put(tty); - } + tty_port_tty_wakeup(&serial->port); hso_kick_transmit(serial); D1(" "); @@ -2008,12 +2003,8 @@ static void ctrl_callback(struct urb *urb) put_rxbuf_data_and_resubmit_ctrl_urb(serial); spin_unlock(&serial->serial_lock); } else { - struct tty_struct *tty = tty_port_tty_get(&serial->port); hso_put_activity(serial->parent); - if (tty) { - tty_wakeup(tty); - tty_kref_put(tty); - } + tty_port_tty_wakeup(&serial->port); /* response to a write command */ hso_kick_transmit(serial); } diff --git a/drivers/s390/char/sclp_tty.c b/drivers/s390/char/sclp_tty.c index 14b4cb8abcc8..7ed7a5987816 100644 --- a/drivers/s390/char/sclp_tty.c +++ b/drivers/s390/char/sclp_tty.c @@ -107,7 +107,6 @@ sclp_tty_write_room (struct tty_struct *tty) static void sclp_ttybuf_callback(struct sclp_buffer *buffer, int rc) { - struct tty_struct *tty; unsigned long flags; void *page; @@ -125,12 +124,8 @@ sclp_ttybuf_callback(struct sclp_buffer *buffer, int rc) struct sclp_buffer, list); spin_unlock_irqrestore(&sclp_tty_lock, flags); } while (buffer && sclp_emit_buffer(buffer, sclp_ttybuf_callback)); - /* check if the tty needs a wake up call */ - tty = tty_port_tty_get(&sclp_port); - if (tty != NULL) { - tty_wakeup(tty); - tty_kref_put(tty); - } + + tty_port_tty_wakeup(&sclp_port); } static inline void diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c index 6c92f62623be..5aaaa2ec8df4 100644 --- a/drivers/s390/char/sclp_vt220.c +++ b/drivers/s390/char/sclp_vt220.c @@ -114,7 +114,6 @@ static struct sclp_register sclp_vt220_register = { static void sclp_vt220_process_queue(struct sclp_vt220_request *request) { - struct tty_struct *tty; unsigned long flags; void *page; @@ -139,12 +138,7 @@ sclp_vt220_process_queue(struct sclp_vt220_request *request) } while (__sclp_vt220_emit(request)); if (request == NULL && sclp_vt220_flush_later) sclp_vt220_emit_current(); - /* Check if the tty needs a wake up call */ - tty = tty_port_tty_get(&sclp_vt220_port); - if (tty) { - tty_wakeup(tty); - tty_kref_put(tty); - } + tty_port_tty_wakeup(&sclp_vt220_port); } #define SCLP_BUFFER_MAX_RETRY 1 diff --git a/drivers/staging/fwserial/fwserial.c b/drivers/staging/fwserial/fwserial.c index 5a6fb44f38a8..5c64e3a35b28 100644 --- a/drivers/staging/fwserial/fwserial.c +++ b/drivers/staging/fwserial/fwserial.c @@ -744,7 +744,6 @@ static void fwtty_tx_complete(struct fw_card *card, int rcode, struct fwtty_transaction *txn) { struct fwtty_port *port = txn->port; - struct tty_struct *tty; int len; fwtty_dbg(port, "rcode: %d", rcode); @@ -769,13 +768,8 @@ static void fwtty_tx_complete(struct fw_card *card, int rcode, port->stats.dropped += txn->dma_pended.len; } - if (len < WAKEUP_CHARS) { - tty = tty_port_tty_get(&port->port); - if (tty) { - tty_wakeup(tty); - tty_kref_put(tty); - } - } + if (len < WAKEUP_CHARS) + tty_port_tty_wakeup(&port->port); } static int fwtty_tx(struct fwtty_port *port, bool drain) diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c index b1bb1a6abe81..8a6e5ea476e1 100644 --- a/drivers/staging/serqt_usb2/serqt_usb2.c +++ b/drivers/staging/serqt_usb2/serqt_usb2.c @@ -264,7 +264,6 @@ static void ProcessRxChar(struct usb_serial_port *port, unsigned char data) static void qt_write_bulk_callback(struct urb *urb) { - struct tty_struct *tty; int status; struct quatech_port *quatech_port; @@ -278,11 +277,7 @@ static void qt_write_bulk_callback(struct urb *urb) quatech_port = urb->context; - tty = tty_port_tty_get(&quatech_port->port->port); - - if (tty) - tty_wakeup(tty); - tty_kref_put(tty); + tty_port_tty_wakeup(&quatech_port->port->port); } static void qt_interrupt_callback(struct urb *urb) diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c index ed92622b8949..6d0c27cd03da 100644 --- a/drivers/tty/ehv_bytechan.c +++ b/drivers/tty/ehv_bytechan.c @@ -472,13 +472,9 @@ static void ehv_bc_tx_dequeue(struct ehv_bc_data *bc) static irqreturn_t ehv_bc_tty_tx_isr(int irq, void *data) { struct ehv_bc_data *bc = data; - struct tty_struct *ttys = tty_port_tty_get(&bc->port); ehv_bc_tx_dequeue(bc); - if (ttys) { - tty_wakeup(ttys); - tty_kref_put(ttys); - } + tty_port_tty_wakeup(&bc->port); return IRQ_HANDLED; } diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c index ef95a154854a..41901997c0d6 100644 --- a/drivers/tty/hvc/hvsi.c +++ b/drivers/tty/hvc/hvsi.c @@ -861,7 +861,6 @@ static void hvsi_write_worker(struct work_struct *work) { struct hvsi_struct *hp = container_of(work, struct hvsi_struct, writer.work); - struct tty_struct *tty; unsigned long flags; #ifdef DEBUG static long start_j = 0; @@ -895,11 +894,7 @@ static void hvsi_write_worker(struct work_struct *work) start_j = 0; #endif /* DEBUG */ wake_up_all(&hp->emptyq); - tty = tty_port_tty_get(&hp->port); - if (tty) { - tty_wakeup(tty); - tty_kref_put(tty); - } + tty_port_tty_wakeup(&hp->port); } out: diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c index 2dff19796157..2e5bbdc09e1c 100644 --- a/drivers/tty/nozomi.c +++ b/drivers/tty/nozomi.c @@ -791,7 +791,6 @@ static int send_data(enum port_type index, struct nozomi *dc) const u8 toggle = port->toggle_ul; void __iomem *addr = port->ul_addr[toggle]; const u32 ul_size = port->ul_size[toggle]; - struct tty_struct *tty = tty_port_tty_get(&port->port); /* Get data from tty and place in buf for now */ size = kfifo_out(&port->fifo_ul, dc->send_buf, @@ -799,7 +798,6 @@ static int send_data(enum port_type index, struct nozomi *dc) if (size == 0) { DBG4("No more data to send, disable link:"); - tty_kref_put(tty); return 0; } @@ -809,10 +807,8 @@ static int send_data(enum port_type index, struct nozomi *dc) write_mem32(addr, (u32 *) &size, 4); write_mem32(addr + 4, (u32 *) dc->send_buf, size); - if (tty) - tty_wakeup(tty); + tty_port_tty_wakeup(&port->port); - tty_kref_put(tty); return 1; } diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 68d7ce997ede..d723d4193b90 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -442,25 +442,6 @@ static void ifx_spi_setup_spi_header(unsigned char *txbuffer, int tx_count, txbuffer[1] |= (more << IFX_SPI_MORE_BIT) & IFX_SPI_MORE_MASK; } -/** - * ifx_spi_wakeup_serial - SPI space made - * @port_data: our SPI device - * - * We have emptied the FIFO enough that we want to get more data - * queued into it. Poke the line discipline via tty_wakeup so that - * it will feed us more bits - */ -static void ifx_spi_wakeup_serial(struct ifx_spi_device *ifx_dev) -{ - struct tty_struct *tty; - - tty = tty_port_tty_get(&ifx_dev->tty_port); - if (!tty) - return; - tty_wakeup(tty); - tty_kref_put(tty); -} - /** * ifx_spi_prepare_tx_buffer - prepare transmit frame * @ifx_dev: our SPI device @@ -506,7 +487,7 @@ static int ifx_spi_prepare_tx_buffer(struct ifx_spi_device *ifx_dev) tx_count += temp_count; if (temp_count == queue_length) /* poke port to get more data */ - ifx_spi_wakeup_serial(ifx_dev); + tty_port_tty_wakeup(&ifx_dev->tty_port); else /* more data in port, use next SPI message */ ifx_dev->spi_more = 1; } @@ -683,8 +664,6 @@ static void ifx_spi_insert_flip_string(struct ifx_spi_device *ifx_dev, static void ifx_spi_complete(void *ctx) { struct ifx_spi_device *ifx_dev = ctx; - struct tty_struct *tty; - struct tty_ldisc *ldisc = NULL; int length; int actual_length; unsigned char more; @@ -762,15 +741,7 @@ complete_exit: */ ifx_spi_power_state_clear(ifx_dev, IFX_SPI_POWER_DATA_PENDING); - tty = tty_port_tty_get(&ifx_dev->tty_port); - if (tty) { - ldisc = tty_ldisc_ref(tty); - if (ldisc) { - ldisc->ops->write_wakeup(tty); - tty_ldisc_deref(ldisc); - } - tty_kref_put(tty); - } + tty_port_tty_wakeup(&ifx_dev->tty_port); } } } diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c index b7ff59d3db88..8bb757c62ee2 100644 --- a/drivers/tty/tty_port.c +++ b/drivers/tty/tty_port.c @@ -232,6 +232,22 @@ void tty_port_hangup(struct tty_port *port) } EXPORT_SYMBOL(tty_port_hangup); +/** + * tty_port_tty_wakeup - helper to wake up a tty + * + * @port: tty port + */ +void tty_port_tty_wakeup(struct tty_port *port) +{ + struct tty_struct *tty = tty_port_tty_get(port); + + if (tty) { + tty_wakeup(tty); + tty_kref_put(tty); + } +} +EXPORT_SYMBOL_GPL(tty_port_tty_wakeup); + /** * tty_port_carrier_raised - carrier raised check * @port: tty port diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 8ac25adf31b4..755766e4b756 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -475,15 +475,10 @@ static void acm_write_bulk(struct urb *urb) static void acm_softint(struct work_struct *work) { struct acm *acm = container_of(work, struct acm, work); - struct tty_struct *tty; dev_vdbg(&acm->data->dev, "%s\n", __func__); - tty = tty_port_tty_get(&acm->port); - if (!tty) - return; - tty_wakeup(tty); - tty_kref_put(tty); + tty_port_tty_wakeup(&acm->port); } /* diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index ebe45fa0ed50..31191581060c 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -210,7 +210,6 @@ struct digi_port { /* Local Function Declarations */ -static void digi_wakeup_write(struct usb_serial_port *port); static void digi_wakeup_write_lock(struct work_struct *work); static int digi_write_oob_command(struct usb_serial_port *port, unsigned char *buf, int count, int interruptible); @@ -374,20 +373,10 @@ static void digi_wakeup_write_lock(struct work_struct *work) unsigned long flags; spin_lock_irqsave(&priv->dp_port_lock, flags); - digi_wakeup_write(port); + tty_port_tty_wakeup(&port->port); spin_unlock_irqrestore(&priv->dp_port_lock, flags); } -static void digi_wakeup_write(struct usb_serial_port *port) -{ - struct tty_struct *tty = tty_port_tty_get(&port->port); - if (tty) { - tty_wakeup(tty); - tty_kref_put(tty); - } -} - - /* * Digi Write OOB Command * @@ -1044,7 +1033,7 @@ static void digi_write_bulk_callback(struct urb *urb) } } /* wake up processes sleeping on writes immediately */ - digi_wakeup_write(port); + tty_port_tty_wakeup(&port->port); /* also queue up a wakeup at scheduler time, in case we */ /* lost the race in write_chan(). */ schedule_work(&priv->dp_wakeup_work); @@ -1522,7 +1511,7 @@ static int digi_read_oob_callback(struct urb *urb) /* port must be open to use tty struct */ if (rts) { tty->hw_stopped = 0; - digi_wakeup_write(port); + tty_port_tty_wakeup(&port->port); } } else { priv->dp_modem_signals &= ~TIOCM_CTS; diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index b00e5cbf741f..44e5208f7c61 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -565,7 +565,6 @@ static void edge_interrupt_callback(struct urb *urb) struct device *dev; struct edgeport_port *edge_port; struct usb_serial_port *port; - struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; int length = urb->actual_length; int bytes_avail; @@ -644,12 +643,7 @@ static void edge_interrupt_callback(struct urb *urb) /* tell the tty driver that something has changed */ - tty = tty_port_tty_get( - &edge_port->port->port); - if (tty) { - tty_wakeup(tty); - tty_kref_put(tty); - } + tty_port_tty_wakeup(&edge_port->port->port); /* Since we have more credit, check if more data can be sent */ send_more_port_data(edge_serial, @@ -738,7 +732,6 @@ static void edge_bulk_in_callback(struct urb *urb) static void edge_bulk_out_data_callback(struct urb *urb) { struct edgeport_port *edge_port = urb->context; - struct tty_struct *tty; int status = urb->status; if (status) { @@ -747,14 +740,8 @@ static void edge_bulk_out_data_callback(struct urb *urb) __func__, status); } - tty = tty_port_tty_get(&edge_port->port->port); - - if (tty && edge_port->open) { - /* let the tty driver wakeup if it has a special - write_wakeup function */ - tty_wakeup(tty); - } - tty_kref_put(tty); + if (edge_port->open) + tty_port_tty_wakeup(&edge_port->port->port); /* Release the Write URB */ edge_port->write_in_progress = false; @@ -773,7 +760,6 @@ static void edge_bulk_out_data_callback(struct urb *urb) static void edge_bulk_out_cmd_callback(struct urb *urb) { struct edgeport_port *edge_port = urb->context; - struct tty_struct *tty; int status = urb->status; atomic_dec(&CmdUrbs); @@ -794,13 +780,9 @@ static void edge_bulk_out_cmd_callback(struct urb *urb) return; } - /* Get pointer to tty */ - tty = tty_port_tty_get(&edge_port->port->port); - /* tell the tty driver that something has changed */ - if (tty && edge_port->open) - tty_wakeup(tty); - tty_kref_put(tty); + if (edge_port->open) + tty_port_tty_wakeup(&edge_port->port->port); /* we have completed the command */ edge_port->commandPending = false; diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 3b17d5d13dc8..2230223978ca 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -104,10 +104,8 @@ static void keyspan_pda_wakeup_write(struct work_struct *work) struct keyspan_pda_private *priv = container_of(work, struct keyspan_pda_private, wakeup_work); struct usb_serial_port *port = priv->port; - struct tty_struct *tty = tty_port_tty_get(&port->port); - if (tty) - tty_wakeup(tty); - tty_kref_put(tty); + + tty_port_tty_wakeup(&port->port); } static void keyspan_pda_request_unthrottle(struct work_struct *work) diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index e0ebec3b5d6a..e956eae198fd 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -932,7 +932,6 @@ static void mos7720_bulk_in_callback(struct urb *urb) static void mos7720_bulk_out_data_callback(struct urb *urb) { struct moschip_port *mos7720_port; - struct tty_struct *tty; int status = urb->status; if (status) { @@ -946,11 +945,8 @@ static void mos7720_bulk_out_data_callback(struct urb *urb) return ; } - tty = tty_port_tty_get(&mos7720_port->port->port); - - if (tty && mos7720_port->open) - tty_wakeup(tty); - tty_kref_put(tty); + if (mos7720_port->open) + tty_port_tty_wakeup(&mos7720_port->port->port); } /* diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 809fb329eca5..08284d28e84b 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -814,7 +814,6 @@ static void mos7840_bulk_out_data_callback(struct urb *urb) { struct moschip_port *mos7840_port; struct usb_serial_port *port; - struct tty_struct *tty; int status = urb->status; int i; @@ -837,10 +836,8 @@ static void mos7840_bulk_out_data_callback(struct urb *urb) if (mos7840_port_paranoia_check(port, __func__)) return; - tty = tty_port_tty_get(&port->port); - if (tty && mos7840_port->open) - tty_wakeup(tty); - tty_kref_put(tty); + if (mos7840_port->open) + tty_port_tty_wakeup(&port->port); } diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 39cb9b807c3c..437f2d579cde 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -1227,7 +1227,6 @@ static void ti_send(struct ti_port *tport) { int count, result; struct usb_serial_port *port = tport->tp_port; - struct tty_struct *tty = tty_port_tty_get(&port->port); /* FIXME */ unsigned long flags; spin_lock_irqsave(&tport->tp_lock, flags); @@ -1268,14 +1267,12 @@ static void ti_send(struct ti_port *tport) } /* more room in the buffer for new writes, wakeup */ - if (tty) - tty_wakeup(tty); - tty_kref_put(tty); + tty_port_tty_wakeup(&port->port); + wake_up_interruptible(&tport->tp_write_wait); return; unlock: spin_unlock_irqrestore(&tport->tp_lock, flags); - tty_kref_put(tty); return; } diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index a19ed74d770d..2df84845bafb 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -541,16 +541,8 @@ static void usb_serial_port_work(struct work_struct *work) { struct usb_serial_port *port = container_of(work, struct usb_serial_port, work); - struct tty_struct *tty; - tty = tty_port_tty_get(&port->port); - if (!tty) - return; - - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); - - tty_wakeup(tty); - tty_kref_put(tty); + tty_port_tty_wakeup(&port->port); } static void kill_traffic(struct usb_serial_port *port) diff --git a/include/linux/tty.h b/include/linux/tty.h index 63b62865c8e9..b6e890a87eb1 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -534,6 +534,7 @@ extern int tty_port_carrier_raised(struct tty_port *port); extern void tty_port_raise_dtr_rts(struct tty_port *port); extern void tty_port_lower_dtr_rts(struct tty_port *port); extern void tty_port_hangup(struct tty_port *port); +extern void tty_port_tty_wakeup(struct tty_port *port); extern int tty_port_block_til_ready(struct tty_port *port, struct tty_struct *tty, struct file *filp); extern int tty_port_close_start(struct tty_port *port, -- cgit v1.2.3 From aa27a094e2c2e0cc59914e56113b860f524f4479 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 7 Mar 2013 13:12:30 +0100 Subject: TTY: add tty_port_tty_hangup helper It allows for cleaning up on a considerable amount of places. They did port_get, hangup, kref_put. Now the only thing needed is to call tty_port_tty_hangup which does exactly that. And they can also decide whether to consider CLOCAL or completely ignore that. Signed-off-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- arch/um/drivers/chan_kern.c | 6 +----- drivers/mmc/card/sdio_uart.c | 13 ++--------- drivers/net/usb/hso.c | 7 +----- drivers/tty/cyclades.c | 10 ++------- drivers/tty/moxa.c | 19 ++++++---------- drivers/tty/n_gsm.c | 6 +----- drivers/tty/nozomi.c | 9 +++----- drivers/tty/rocket.c | 7 +----- drivers/tty/serial/ifx6x60.c | 21 ++---------------- drivers/tty/tty_port.c | 17 +++++++++++++++ drivers/usb/class/cdc-acm.c | 24 ++++++--------------- drivers/usb/serial/keyspan.c | 43 +++++++++---------------------------- drivers/usb/serial/option.c | 9 ++------ drivers/usb/serial/sierra.c | 8 ++----- include/linux/tty.h | 1 + net/irda/ircomm/ircomm_tty_attach.c | 6 +----- 16 files changed, 58 insertions(+), 148 deletions(-) (limited to 'include/linux') diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c index 15c553c239a1..bf42825ba54f 100644 --- a/arch/um/drivers/chan_kern.c +++ b/arch/um/drivers/chan_kern.c @@ -568,11 +568,7 @@ void chan_interrupt(struct line *line, int irq) reactivate_fd(chan->fd, irq); if (err == -EIO) { if (chan->primary) { - struct tty_struct *tty = tty_port_tty_get(&line->port); - if (tty != NULL) { - tty_hangup(tty); - tty_kref_put(tty); - } + tty_port_tty_hangup(&line->port, false); if (line->chan_out != chan) close_one_chan(line->chan_out, 1); } diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index c931dfe6a59c..f093cea0d060 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -134,7 +134,6 @@ static void sdio_uart_port_put(struct sdio_uart_port *port) static void sdio_uart_port_remove(struct sdio_uart_port *port) { struct sdio_func *func; - struct tty_struct *tty; BUG_ON(sdio_uart_table[port->index] != port); @@ -155,12 +154,8 @@ static void sdio_uart_port_remove(struct sdio_uart_port *port) sdio_claim_host(func); port->func = NULL; mutex_unlock(&port->func_lock); - tty = tty_port_tty_get(&port->port); /* tty_hangup is async so is this safe as is ?? */ - if (tty) { - tty_hangup(tty); - tty_kref_put(tty); - } + tty_port_tty_hangup(&port->port, false); mutex_unlock(&port->port.mutex); sdio_release_irq(func); sdio_disable_func(func); @@ -492,11 +487,7 @@ static void sdio_uart_check_modem_status(struct sdio_uart_port *port) wake_up_interruptible(&port->port.open_wait); else { /* DCD drop - hang up if tty attached */ - tty = tty_port_tty_get(&port->port); - if (tty) { - tty_hangup(tty); - tty_kref_put(tty); - } + tty_port_tty_hangup(&port->port, false); } } if (status & UART_MSR_DCTS) { diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index a7714b4f29ad..cba1d46e672e 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -3124,18 +3124,13 @@ static void hso_serial_ref_free(struct kref *ref) static void hso_free_interface(struct usb_interface *interface) { struct hso_serial *hso_dev; - struct tty_struct *tty; int i; for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) { if (serial_table[i] && (serial_table[i]->interface == interface)) { hso_dev = dev2ser(serial_table[i]); - tty = tty_port_tty_get(&hso_dev->port); - if (tty) { - tty_hangup(tty); - tty_kref_put(tty); - } + tty_port_tty_hangup(&hso_dev->port, false); mutex_lock(&hso_dev->parent->mutex); hso_dev->parent->usb_gone = 1; mutex_unlock(&hso_dev->parent->mutex); diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c index 345bd0e0884e..33f83fee9fae 100644 --- a/drivers/tty/cyclades.c +++ b/drivers/tty/cyclades.c @@ -1124,14 +1124,8 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo) readl(&info->u.cyz.ch_ctrl->rs_status); if (dcd & C_RS_DCD) wake_up_interruptible(&info->port.open_wait); - else { - struct tty_struct *tty; - tty = tty_port_tty_get(&info->port); - if (tty) { - tty_hangup(tty); - tty_kref_put(tty); - } - } + else + tty_port_tty_hangup(&info->port, false); } break; case C_CM_MCTS: diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c index adeac255e526..1deaca4674e4 100644 --- a/drivers/tty/moxa.c +++ b/drivers/tty/moxa.c @@ -913,16 +913,12 @@ static void moxa_board_deinit(struct moxa_board_conf *brd) /* pci hot-un-plug support */ for (a = 0; a < brd->numPorts; a++) - if (brd->ports[a].port.flags & ASYNC_INITIALIZED) { - struct tty_struct *tty = tty_port_tty_get( - &brd->ports[a].port); - if (tty) { - tty_hangup(tty); - tty_kref_put(tty); - } - } + if (brd->ports[a].port.flags & ASYNC_INITIALIZED) + tty_port_tty_hangup(&brd->ports[a].port, false); + for (a = 0; a < MAX_PORTS_PER_BOARD; a++) tty_port_destroy(&brd->ports[a].port); + while (1) { opened = 0; for (a = 0; a < brd->numPorts; a++) @@ -1365,7 +1361,6 @@ static void moxa_hangup(struct tty_struct *tty) static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd) { - struct tty_struct *tty; unsigned long flags; dcd = !!dcd; @@ -1373,10 +1368,8 @@ static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd) if (dcd != p->DCDState) { p->DCDState = dcd; spin_unlock_irqrestore(&p->port.lock, flags); - tty = tty_port_tty_get(&p->port); - if (tty && !C_CLOCAL(tty) && !dcd) - tty_hangup(tty); - tty_kref_put(tty); + if (!dcd) + tty_port_tty_hangup(&p->port, true); } else spin_unlock_irqrestore(&p->port.lock, flags); diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 4a43ef5d7962..74d9a0258d7c 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -1418,11 +1418,7 @@ static void gsm_dlci_close(struct gsm_dlci *dlci) pr_debug("DLCI %d goes closed.\n", dlci->addr); dlci->state = DLCI_CLOSED; if (dlci->addr != 0) { - struct tty_struct *tty = tty_port_tty_get(&dlci->port); - if (tty) { - tty_hangup(tty); - tty_kref_put(tty); - } + tty_port_tty_hangup(&dlci->port, false); kfifo_reset(dlci->fifo); } else dlci->gsm->dead = 1; diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c index 2e5bbdc09e1c..d6080c3831ef 100644 --- a/drivers/tty/nozomi.c +++ b/drivers/tty/nozomi.c @@ -1501,12 +1501,9 @@ static void tty_exit(struct nozomi *dc) DBG1(" "); - for (i = 0; i < MAX_PORT; ++i) { - struct tty_struct *tty = tty_port_tty_get(&dc->port[i].port); - if (tty && list_empty(&tty->hangup_work.entry)) - tty_hangup(tty); - tty_kref_put(tty); - } + for (i = 0; i < MAX_PORT; ++i) + tty_port_tty_hangup(&dc->port[i].port, false); + /* Racy below - surely should wait for scheduled work to be done or complete off a hangup method ? */ while (dc->open_ttys) diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c index 1d270034bfc3..bbffd7a431e9 100644 --- a/drivers/tty/rocket.c +++ b/drivers/tty/rocket.c @@ -521,15 +521,10 @@ static void rp_handle_port(struct r_port *info) (ChanStatus & CD_ACT) ? "on" : "off"); #endif if (!(ChanStatus & CD_ACT) && info->cd_status) { - struct tty_struct *tty; #ifdef ROCKET_DEBUG_HANGUP printk(KERN_INFO "CD drop, calling hangup.\n"); #endif - tty = tty_port_tty_get(&info->port); - if (tty) { - tty_hangup(tty); - tty_kref_put(tty); - } + tty_port_tty_hangup(&info->port, false); } info->cd_status = (ChanStatus & CD_ACT) ? 1 : 0; wake_up_interruptible(&info->port.open_wait); diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index d723d4193b90..2c77fed31a72 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -269,23 +269,6 @@ static void mrdy_assert(struct ifx_spi_device *ifx_dev) mrdy_set_high(ifx_dev); } -/** - * ifx_spi_hangup - hang up an IFX device - * @ifx_dev: our SPI device - * - * Hang up the tty attached to the IFX device if one is currently - * open. If not take no action - */ -static void ifx_spi_ttyhangup(struct ifx_spi_device *ifx_dev) -{ - struct tty_port *pport = &ifx_dev->tty_port; - struct tty_struct *tty = tty_port_tty_get(pport); - if (tty) { - tty_hangup(tty); - tty_kref_put(tty); - } -} - /** * ifx_spi_timeout - SPI timeout * @arg: our SPI device @@ -298,7 +281,7 @@ static void ifx_spi_timeout(unsigned long arg) struct ifx_spi_device *ifx_dev = (struct ifx_spi_device *)arg; dev_warn(&ifx_dev->spi_dev->dev, "*** SPI Timeout ***"); - ifx_spi_ttyhangup(ifx_dev); + tty_port_tty_hangup(&ifx_dev->tty_port, false); mrdy_set_low(ifx_dev); clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); } @@ -933,7 +916,7 @@ static irqreturn_t ifx_spi_reset_interrupt(int irq, void *dev) set_bit(MR_INPROGRESS, &ifx_dev->mdm_reset_state); if (!solreset) { /* unsolicited reset */ - ifx_spi_ttyhangup(ifx_dev); + tty_port_tty_hangup(&ifx_dev->tty_port, false); } } else { /* exited reset */ diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c index 8bb757c62ee2..7f38eeaafac3 100644 --- a/drivers/tty/tty_port.c +++ b/drivers/tty/tty_port.c @@ -232,6 +232,23 @@ void tty_port_hangup(struct tty_port *port) } EXPORT_SYMBOL(tty_port_hangup); +/** + * tty_port_tty_hangup - helper to hang up a tty + * + * @port: tty port + * @check_clocal: hang only ttys with CLOCAL unset? + */ +void tty_port_tty_hangup(struct tty_port *port, bool check_clocal) +{ + struct tty_struct *tty = tty_port_tty_get(port); + + if (tty && (!check_clocal || !C_CLOCAL(tty))) { + tty_hangup(tty); + tty_kref_put(tty); + } +} +EXPORT_SYMBOL_GPL(tty_port_tty_hangup); + /** * tty_port_tty_wakeup - helper to wake up a tty * diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 755766e4b756..27a18743275e 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -292,7 +292,6 @@ static void acm_ctrl_irq(struct urb *urb) { struct acm *acm = urb->context; struct usb_cdc_notification *dr = urb->transfer_buffer; - struct tty_struct *tty; unsigned char *data; int newctrl; int retval; @@ -327,17 +326,12 @@ static void acm_ctrl_irq(struct urb *urb) break; case USB_CDC_NOTIFY_SERIAL_STATE: - tty = tty_port_tty_get(&acm->port); newctrl = get_unaligned_le16(data); - if (tty) { - if (!acm->clocal && - (acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) { - dev_dbg(&acm->control->dev, - "%s - calling hangup\n", __func__); - tty_hangup(tty); - } - tty_kref_put(tty); + if (!acm->clocal && (acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) { + dev_dbg(&acm->control->dev, "%s - calling hangup\n", + __func__); + tty_port_tty_hangup(&acm->port, false); } acm->ctrlin = newctrl; @@ -1498,15 +1492,9 @@ err_out: static int acm_reset_resume(struct usb_interface *intf) { struct acm *acm = usb_get_intfdata(intf); - struct tty_struct *tty; - if (test_bit(ASYNCB_INITIALIZED, &acm->port.flags)) { - tty = tty_port_tty_get(&acm->port); - if (tty) { - tty_hangup(tty); - tty_kref_put(tty); - } - } + if (test_bit(ASYNCB_INITIALIZED, &acm->port.flags)) + tty_port_tty_hangup(&acm->port, false); return acm_resume(intf); } diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 1fd1935c8316..b011478d2e5f 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -378,7 +378,6 @@ static void usa26_instat_callback(struct urb *urb) struct usb_serial *serial; struct usb_serial_port *port; struct keyspan_port_private *p_priv; - struct tty_struct *tty; int old_dcd_state, err; int status = urb->status; @@ -421,12 +420,8 @@ static void usa26_instat_callback(struct urb *urb) p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0); p_priv->ri_state = ((msg->ri) ? 1 : 0); - if (old_dcd_state != p_priv->dcd_state) { - tty = tty_port_tty_get(&port->port); - if (tty && !C_CLOCAL(tty)) - tty_hangup(tty); - tty_kref_put(tty); - } + if (old_dcd_state != p_priv->dcd_state) + tty_port_tty_hangup(&port->port, true); /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); @@ -510,7 +505,6 @@ static void usa28_instat_callback(struct urb *urb) struct usb_serial *serial; struct usb_serial_port *port; struct keyspan_port_private *p_priv; - struct tty_struct *tty; int old_dcd_state; int status = urb->status; @@ -551,12 +545,8 @@ static void usa28_instat_callback(struct urb *urb) p_priv->dcd_state = ((msg->dcd) ? 1 : 0); p_priv->ri_state = ((msg->ri) ? 1 : 0); - if (old_dcd_state != p_priv->dcd_state && old_dcd_state) { - tty = tty_port_tty_get(&port->port); - if (tty && !C_CLOCAL(tty)) - tty_hangup(tty); - tty_kref_put(tty); - } + if (old_dcd_state != p_priv->dcd_state && old_dcd_state) + tty_port_tty_hangup(&port->port, true); /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); @@ -642,12 +632,8 @@ static void usa49_instat_callback(struct urb *urb) p_priv->dcd_state = ((msg->dcd) ? 1 : 0); p_priv->ri_state = ((msg->ri) ? 1 : 0); - if (old_dcd_state != p_priv->dcd_state && old_dcd_state) { - struct tty_struct *tty = tty_port_tty_get(&port->port); - if (tty && !C_CLOCAL(tty)) - tty_hangup(tty); - tty_kref_put(tty); - } + if (old_dcd_state != p_priv->dcd_state && old_dcd_state) + tty_port_tty_hangup(&port->port, true); /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); @@ -851,7 +837,6 @@ static void usa90_instat_callback(struct urb *urb) struct usb_serial *serial; struct usb_serial_port *port; struct keyspan_port_private *p_priv; - struct tty_struct *tty; int old_dcd_state, err; int status = urb->status; @@ -880,12 +865,8 @@ static void usa90_instat_callback(struct urb *urb) p_priv->dcd_state = ((msg->dcd) ? 1 : 0); p_priv->ri_state = ((msg->ri) ? 1 : 0); - if (old_dcd_state != p_priv->dcd_state && old_dcd_state) { - tty = tty_port_tty_get(&port->port); - if (tty && !C_CLOCAL(tty)) - tty_hangup(tty); - tty_kref_put(tty); - } + if (old_dcd_state != p_priv->dcd_state && old_dcd_state) + tty_port_tty_hangup(&port->port, true); /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); @@ -953,12 +934,8 @@ static void usa67_instat_callback(struct urb *urb) p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0); p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0); - if (old_dcd_state != p_priv->dcd_state && old_dcd_state) { - struct tty_struct *tty = tty_port_tty_get(&port->port); - if (tty && !C_CLOCAL(tty)) - tty_hangup(tty); - tty_kref_put(tty); - } + if (old_dcd_state != p_priv->dcd_state && old_dcd_state) + tty_port_tty_hangup(&port->port, true); /* Resubmit urb so we continue receiving */ err = usb_submit_urb(urb, GFP_ATOMIC); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index f7d339d8187b..602d1f389a3b 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1532,13 +1532,8 @@ static void option_instat_callback(struct urb *urb) portdata->dsr_state = ((signals & 0x02) ? 1 : 0); portdata->ri_state = ((signals & 0x08) ? 1 : 0); - if (old_dcd_state && !portdata->dcd_state) { - struct tty_struct *tty = - tty_port_tty_get(&port->port); - if (tty && !C_CLOCAL(tty)) - tty_hangup(tty); - tty_kref_put(tty); - } + if (old_dcd_state && !portdata->dcd_state) + tty_port_tty_hangup(&port->port, true); } else { dev_dbg(dev, "%s: type %x req %x\n", __func__, req_pkt->bRequestType, req_pkt->bRequest); diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index c13f6e747748..d66148a17fe3 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -628,7 +628,6 @@ static void sierra_instat_callback(struct urb *urb) unsigned char signals = *((unsigned char *) urb->transfer_buffer + sizeof(struct usb_ctrlrequest)); - struct tty_struct *tty; dev_dbg(&port->dev, "%s: signal x%x\n", __func__, signals); @@ -639,11 +638,8 @@ static void sierra_instat_callback(struct urb *urb) portdata->dsr_state = ((signals & 0x02) ? 1 : 0); portdata->ri_state = ((signals & 0x08) ? 1 : 0); - tty = tty_port_tty_get(&port->port); - if (tty && !C_CLOCAL(tty) && - old_dcd_state && !portdata->dcd_state) - tty_hangup(tty); - tty_kref_put(tty); + if (old_dcd_state && !portdata->dcd_state) + tty_port_tty_hangup(&port->port, true); } else { dev_dbg(&port->dev, "%s: type %x req %x\n", __func__, req_pkt->bRequestType, diff --git a/include/linux/tty.h b/include/linux/tty.h index b6e890a87eb1..d3548f871968 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -534,6 +534,7 @@ extern int tty_port_carrier_raised(struct tty_port *port); extern void tty_port_raise_dtr_rts(struct tty_port *port); extern void tty_port_lower_dtr_rts(struct tty_port *port); extern void tty_port_hangup(struct tty_port *port); +extern void tty_port_tty_hangup(struct tty_port *port, bool check_clocal); extern void tty_port_tty_wakeup(struct tty_port *port); extern int tty_port_block_til_ready(struct tty_port *port, struct tty_struct *tty, struct file *filp); diff --git a/net/irda/ircomm/ircomm_tty_attach.c b/net/irda/ircomm/ircomm_tty_attach.c index edab393e0c82..a2a508f5f268 100644 --- a/net/irda/ircomm/ircomm_tty_attach.c +++ b/net/irda/ircomm/ircomm_tty_attach.c @@ -997,12 +997,8 @@ static int ircomm_tty_state_ready(struct ircomm_tty_cb *self, self->settings.dce = IRCOMM_DELTA_CD; ircomm_tty_check_modem_status(self); } else { - struct tty_struct *tty = tty_port_tty_get(&self->port); IRDA_DEBUG(0, "%s(), hanging up!\n", __func__ ); - if (tty) { - tty_hangup(tty); - tty_kref_put(tty); - } + tty_port_tty_hangup(&self->port, false); } break; default: -- cgit v1.2.3 From 21622939fc452c7fb739464b8e49368c3ceaa0ee Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Mon, 11 Mar 2013 16:44:21 -0400 Subject: tty: Add diagnostic for halted line discipline Flip buffer work must not be scheduled by the line discipline after the line discipline has been halted; issue warning. Note: drivers can still schedule flip buffer work. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_tty.c | 8 ++++++++ drivers/tty/tty_ldisc.c | 7 ++++++- include/linux/tty.h | 1 + 3 files changed, 15 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 68865d9af8a0..16793eccc6ae 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -153,6 +153,12 @@ static void n_tty_set_room(struct tty_struct *tty) if (left && !old_left) { WARN_RATELIMIT(tty->port->itty == NULL, "scheduling with invalid itty\n"); + /* see if ldisc has been killed - if so, this means that + * even though the ldisc has been halted and ->buf.work + * cancelled, ->buf.work is about to be rescheduled + */ + WARN_RATELIMIT(test_bit(TTY_LDISC_HALTED, &tty->flags), + "scheduling buffer work for halted ldisc\n"); schedule_work(&tty->port->buf.work); } } @@ -1624,6 +1630,8 @@ static int n_tty_open(struct tty_struct *tty) goto err_free_bufs; tty->disc_data = ldata; + /* indicate buffer work may resume */ + clear_bit(TTY_LDISC_HALTED, &tty->flags); reset_buffer_flags(tty); tty_unthrottle(tty); ldata->column = 0; diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index d794087c327e..c641321b9404 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -375,6 +375,7 @@ static inline void tty_ldisc_put(struct tty_ldisc *ld) void tty_ldisc_enable(struct tty_struct *tty) { + clear_bit(TTY_LDISC_HALTED, &tty->flags); set_bit(TTY_LDISC, &tty->flags); clear_bit(TTY_LDISC_CHANGING, &tty->flags); wake_up(&tty_ldisc_wait); @@ -513,8 +514,11 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) static int tty_ldisc_halt(struct tty_struct *tty) { + int scheduled; clear_bit(TTY_LDISC, &tty->flags); - return cancel_work_sync(&tty->port->buf.work); + scheduled = cancel_work_sync(&tty->port->buf.work); + set_bit(TTY_LDISC_HALTED, &tty->flags); + return scheduled; } /** @@ -820,6 +824,7 @@ void tty_ldisc_hangup(struct tty_struct *tty) clear_bit(TTY_LDISC, &tty->flags); tty_unlock(tty); cancel_work_sync(&tty->port->buf.work); + set_bit(TTY_LDISC_HALTED, &tty->flags); mutex_unlock(&tty->ldisc_mutex); retry: tty_lock(tty); diff --git a/include/linux/tty.h b/include/linux/tty.h index d3548f871968..66ae020e8a98 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -315,6 +315,7 @@ struct tty_file_private { #define TTY_NO_WRITE_SPLIT 17 /* Preserve write boundaries to driver */ #define TTY_HUPPED 18 /* Post driver->hangup() */ #define TTY_HUPPING 21 /* ->hangup() in progress */ +#define TTY_LDISC_HALTED 22 /* Line discipline is halted */ #define TTY_WRITE_FLUSH(tty) tty_write_flush((tty)) -- cgit v1.2.3 From d912156605b0eb3b3070dc7eabc43db6379aa43b Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Mon, 11 Mar 2013 16:44:33 -0400 Subject: tty: Don't reenable already enabled ldisc tty_ldisc_hangup() guarantees the ldisc is enabled (or that there is no ldisc). Since __tty_hangup() was the only user, re-define tty_ldisc_enable() in file-scope. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_io.c | 1 - drivers/tty/tty_ldisc.c | 2 +- include/linux/tty.h | 2 -- 3 files changed, 1 insertion(+), 4 deletions(-) (limited to 'include/linux') diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index d3ddb31e363e..e6ee0f459a20 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -693,7 +693,6 @@ static void __tty_hangup(struct tty_struct *tty, int exit_session) */ set_bit(TTY_HUPPED, &tty->flags); clear_bit(TTY_HUPPING, &tty->flags); - tty_ldisc_enable(tty); tty_unlock(tty); diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 37671fcc7e4c..9c727da59fac 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -373,7 +373,7 @@ static inline void tty_ldisc_put(struct tty_ldisc *ld) * Clearing directly is allowed. */ -void tty_ldisc_enable(struct tty_struct *tty) +static void tty_ldisc_enable(struct tty_struct *tty) { clear_bit(TTY_LDISC_HALTED, &tty->flags); set_bit(TTY_LDISC, &tty->flags); diff --git a/include/linux/tty.h b/include/linux/tty.h index 66ae020e8a98..367a9dfc4ea2 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -561,8 +561,6 @@ extern void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty); extern void tty_ldisc_init(struct tty_struct *tty); extern void tty_ldisc_deinit(struct tty_struct *tty); extern void tty_ldisc_begin(void); -/* This last one is just for the tty layer internals and shouldn't be used elsewhere */ -extern void tty_ldisc_enable(struct tty_struct *tty); /* n_tty.c */ -- cgit v1.2.3 From cb06ff102e2d79a82cf780aa5e6947b2e0529ac0 Mon Sep 17 00:00:00 2001 From: Chanho Min Date: Wed, 27 Mar 2013 18:38:11 +0900 Subject: ARM: PL011: Add support for Rx DMA buffer polling. In DMA support, The received data is not pushed to tty until the DMA buffer is filled. But some megabyte rate chips such as BT expect fast response and data should be pushed immediately. In order to fix this issue, We suggest the use of the timer for polling DMA buffer. In our test, no data loss occurred at high-baudrate as compared with interrupt- driven (We tested with 3Mbps). We changes: - We add timer for polling. If we set poll_timer to 10, every 10ms, timer handler checks the residue in the dma buffer and transfer data to the tty. Also, last_residue is updated for the next polling. - poll_timeout is used to prevent the timer's system cost. If poll_timeout is set to 3000 and no data is received in 3 seconds, we inactivate poll timer and driver falls back to interrupt-driven. When data is received again in FIFO and UART irq is occurred, we switch back to DMA mode and start polling. - We use consistent DMA mappings to avoid from the frequent cache operation of the timer function for default. - pl011_dma_rx_chars is modified. the pending size is recalculated because data can be taken by polling. - the polling time is adjusted if dma rx poll is enabled but no rate is specified. Ideal polling interval to push 1 character at every interval is the reciprocal of 'baud rate / 10 line bits per character / 1000 ms per sec'. But It is very aggressive to system. Experimentally, '10000000 / baud' is suitable to receive dozens of characters. the poll rate can be specified statically by dma_rx_poll_rate of the platform data as well. Changes compared to v1: - Use of consistent DMA mappings. - Added dma_rx_poll_rate in platform data to specify the polling interval. - Added dma_rx_poll_timeout in platform data to specify the polling timeout. Changes compared to v2: - Use of consistent DMA mappings for default. - Added dma_rx_poll_enable in platform data to adjust the polling time according to the baud rate. - remove unnecessary lock from the polling function. Signed-off-by: Chanho Min Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/amba-pl011.c | 157 +++++++++++++++++++++++++++++++++++----- include/linux/amba/serial.h | 3 + 2 files changed, 141 insertions(+), 19 deletions(-) (limited to 'include/linux') diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 3ea5408fcbeb..b031abf43a7a 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -29,6 +29,7 @@ * and hooked into this driver. */ + #if defined(CONFIG_SERIAL_AMBA_PL011_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ #endif @@ -117,6 +118,12 @@ struct pl011_dmarx_data { struct pl011_sgbuf sgbuf_b; dma_cookie_t cookie; bool running; + struct timer_list timer; + unsigned int last_residue; + unsigned long last_jiffies; + bool auto_poll_rate; + unsigned int poll_rate; + unsigned int poll_timeout; }; struct pl011_dmatx_data { @@ -223,16 +230,18 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap) static int pl011_sgbuf_init(struct dma_chan *chan, struct pl011_sgbuf *sg, enum dma_data_direction dir) { - sg->buf = kmalloc(PL011_DMA_BUFFER_SIZE, GFP_KERNEL); + dma_addr_t dma_addr; + + sg->buf = dma_alloc_coherent(chan->device->dev, + PL011_DMA_BUFFER_SIZE, &dma_addr, GFP_KERNEL); if (!sg->buf) return -ENOMEM; - sg_init_one(&sg->sg, sg->buf, PL011_DMA_BUFFER_SIZE); + sg_init_table(&sg->sg, 1); + sg_set_page(&sg->sg, phys_to_page(dma_addr), + PL011_DMA_BUFFER_SIZE, offset_in_page(dma_addr)); + sg_dma_address(&sg->sg) = dma_addr; - if (dma_map_sg(chan->device->dev, &sg->sg, 1, dir) != 1) { - kfree(sg->buf); - return -EINVAL; - } return 0; } @@ -240,8 +249,9 @@ static void pl011_sgbuf_free(struct dma_chan *chan, struct pl011_sgbuf *sg, enum dma_data_direction dir) { if (sg->buf) { - dma_unmap_sg(chan->device->dev, &sg->sg, 1, dir); - kfree(sg->buf); + dma_free_coherent(chan->device->dev, + PL011_DMA_BUFFER_SIZE, sg->buf, + sg_dma_address(&sg->sg)); } } @@ -300,6 +310,29 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap) dmaengine_slave_config(chan, &rx_conf); uap->dmarx.chan = chan; + if (plat->dma_rx_poll_enable) { + /* Set poll rate if specified. */ + if (plat->dma_rx_poll_rate) { + uap->dmarx.auto_poll_rate = false; + uap->dmarx.poll_rate = plat->dma_rx_poll_rate; + } else { + /* + * 100 ms defaults to poll rate if not + * specified. This will be adjusted with + * the baud rate at set_termios. + */ + uap->dmarx.auto_poll_rate = true; + uap->dmarx.poll_rate = 100; + } + /* 3 secs defaults poll_timeout if not specified. */ + if (plat->dma_rx_poll_timeout) + uap->dmarx.poll_timeout = + plat->dma_rx_poll_timeout; + else + uap->dmarx.poll_timeout = 3000; + } else + uap->dmarx.auto_poll_rate = false; + dev_info(uap->port.dev, "DMA channel RX %s\n", dma_chan_name(uap->dmarx.chan)); } @@ -701,24 +734,30 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap, struct tty_port *port = &uap->port.state->port; struct pl011_sgbuf *sgbuf = use_buf_b ? &uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a; - struct device *dev = uap->dmarx.chan->device->dev; int dma_count = 0; u32 fifotaken = 0; /* only used for vdbg() */ - /* Pick everything from the DMA first */ + struct pl011_dmarx_data *dmarx = &uap->dmarx; + int dmataken = 0; + + if (uap->dmarx.poll_rate) { + /* The data can be taken by polling */ + dmataken = sgbuf->sg.length - dmarx->last_residue; + /* Recalculate the pending size */ + if (pending >= dmataken) + pending -= dmataken; + } + + /* Pick the remain data from the DMA */ if (pending) { - /* Sync in buffer */ - dma_sync_sg_for_cpu(dev, &sgbuf->sg, 1, DMA_FROM_DEVICE); /* * First take all chars in the DMA pipe, then look in the FIFO. * Note that tty_insert_flip_buf() tries to take as many chars * as it can. */ - dma_count = tty_insert_flip_string(port, sgbuf->buf, pending); - - /* Return buffer to device */ - dma_sync_sg_for_device(dev, &sgbuf->sg, 1, DMA_FROM_DEVICE); + dma_count = tty_insert_flip_string(port, sgbuf->buf + dmataken, + pending); uap->port.icount.rx += dma_count; if (dma_count < pending) @@ -726,6 +765,10 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap, "couldn't insert all characters (TTY is full?)\n"); } + /* Reset the last_residue for Rx DMA poll */ + if (uap->dmarx.poll_rate) + dmarx->last_residue = sgbuf->sg.length; + /* * Only continue with trying to read the FIFO if all DMA chars have * been taken first. @@ -865,6 +908,57 @@ static inline void pl011_dma_rx_stop(struct uart_amba_port *uap) writew(uap->dmacr, uap->port.membase + UART011_DMACR); } +/* + * Timer handler for Rx DMA polling. + * Every polling, It checks the residue in the dma buffer and transfer + * data to the tty. Also, last_residue is updated for the next polling. + */ +static void pl011_dma_rx_poll(unsigned long args) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)args; + struct tty_port *port = &uap->port.state->port; + struct pl011_dmarx_data *dmarx = &uap->dmarx; + struct dma_chan *rxchan = uap->dmarx.chan; + unsigned long flags = 0; + unsigned int dmataken = 0; + unsigned int size = 0; + struct pl011_sgbuf *sgbuf; + int dma_count; + struct dma_tx_state state; + + sgbuf = dmarx->use_buf_b ? &uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a; + rxchan->device->device_tx_status(rxchan, dmarx->cookie, &state); + if (likely(state.residue < dmarx->last_residue)) { + dmataken = sgbuf->sg.length - dmarx->last_residue; + size = dmarx->last_residue - state.residue; + dma_count = tty_insert_flip_string(port, sgbuf->buf + dmataken, + size); + if (dma_count == size) + dmarx->last_residue = state.residue; + dmarx->last_jiffies = jiffies; + } + tty_flip_buffer_push(port); + + /* + * If no data is received in poll_timeout, the driver will fall back + * to interrupt mode. We will retrigger DMA at the first interrupt. + */ + if (jiffies_to_msecs(jiffies - dmarx->last_jiffies) + > uap->dmarx.poll_timeout) { + + spin_lock_irqsave(&uap->port.lock, flags); + pl011_dma_rx_stop(uap); + spin_unlock_irqrestore(&uap->port.lock, flags); + + uap->dmarx.running = false; + dmaengine_terminate_all(rxchan); + del_timer(&uap->dmarx.timer); + } else { + mod_timer(&uap->dmarx.timer, + jiffies + msecs_to_jiffies(uap->dmarx.poll_rate)); + } +} + static void pl011_dma_startup(struct uart_amba_port *uap) { int ret; @@ -927,6 +1021,16 @@ skip_rx: if (pl011_dma_rx_trigger_dma(uap)) dev_dbg(uap->port.dev, "could not trigger initial " "RX DMA job, fall back to interrupt mode\n"); + if (uap->dmarx.poll_rate) { + init_timer(&(uap->dmarx.timer)); + uap->dmarx.timer.function = pl011_dma_rx_poll; + uap->dmarx.timer.data = (unsigned long)uap; + mod_timer(&uap->dmarx.timer, + jiffies + + msecs_to_jiffies(uap->dmarx.poll_rate)); + uap->dmarx.last_residue = PL011_DMA_BUFFER_SIZE; + uap->dmarx.last_jiffies = jiffies; + } } } @@ -962,6 +1066,8 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap) /* Clean up the RX DMA */ pl011_sgbuf_free(uap->dmarx.chan, &uap->dmarx.sgbuf_a, DMA_FROM_DEVICE); pl011_sgbuf_free(uap->dmarx.chan, &uap->dmarx.sgbuf_b, DMA_FROM_DEVICE); + if (uap->dmarx.poll_rate) + del_timer_sync(&uap->dmarx.timer); uap->using_rx_dma = false; } } @@ -976,7 +1082,6 @@ static inline bool pl011_dma_rx_running(struct uart_amba_port *uap) return uap->using_rx_dma && uap->dmarx.running; } - #else /* Blank functions if the DMA engine is not available */ static inline void pl011_dma_probe(struct uart_amba_port *uap) @@ -1088,8 +1193,18 @@ static void pl011_rx_chars(struct uart_amba_port *uap) dev_dbg(uap->port.dev, "could not trigger RX DMA job " "fall back to interrupt mode again\n"); uap->im |= UART011_RXIM; - } else + } else { uap->im &= ~UART011_RXIM; + /* Start Rx DMA poll */ + if (uap->dmarx.poll_rate) { + uap->dmarx.last_jiffies = jiffies; + uap->dmarx.last_residue = PL011_DMA_BUFFER_SIZE; + mod_timer(&uap->dmarx.timer, + jiffies + + msecs_to_jiffies(uap->dmarx.poll_rate)); + } + } + writew(uap->im, uap->port.membase + UART011_IMSC); } spin_lock(&uap->port.lock); @@ -1164,7 +1279,6 @@ static irqreturn_t pl011_int(int irq, void *dev_id) unsigned int dummy_read; spin_lock_irqsave(&uap->port.lock, flags); - status = readw(uap->port.membase + UART011_MIS); if (status) { do { @@ -1551,6 +1665,11 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, */ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / clkdiv); + /* + * Adjust RX DMA polling rate with baud rate if not specified. + */ + if (uap->dmarx.auto_poll_rate) + uap->dmarx.poll_rate = DIV_ROUND_UP(10000000, baud); if (baud > port->uartclk/16) quot = DIV_ROUND_CLOSEST(port->uartclk * 8, baud); diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h index f612c783170f..62d9303c2837 100644 --- a/include/linux/amba/serial.h +++ b/include/linux/amba/serial.h @@ -203,6 +203,9 @@ struct amba_pl011_data { bool (*dma_filter)(struct dma_chan *chan, void *filter_param); void *dma_rx_param; void *dma_tx_param; + bool dma_rx_poll_enable; + unsigned int dma_rx_poll_rate; + unsigned int dma_rx_poll_timeout; void (*init) (void); void (*exit) (void); }; -- cgit v1.2.3 From 9ee51f01eee84a108510ac2794b9a9dff8be6d3f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 11 Apr 2013 02:04:48 +0200 Subject: tty: serial/samsung: make register definitions global The registers for the Samsung S3C serial port are currently defined in the platform specific arch/arm/plat-samsung/include/plat/regs-serial.h file, which is not visible to multiplatform capable drivers. Unfortunately, it is not possible to move the file into a more local place as we should normally try to, because the same registers may be used in one of four places: * In the driver itself * In platform-independent ARM code for early debug output * In platform_data definitions * In the Samsung platform power management code I have also found no way to logically split out a platform_data file, other than possibly move everything into include/linux/platform_data, which also felt wrong. The only part of this file that makes sense to keep specific to the s3c24xx platform are the virtual and physical addresses defined here, which are needed in no other location. Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- arch/arm/mach-s3c24xx/clock-s3c2440.c | 5 + arch/arm/mach-s3c24xx/common.c | 5 + arch/arm/plat-samsung/include/plat/regs-serial.h | 282 +---------------------- drivers/tty/serial/samsung.c | 6 +- include/linux/serial_s3c.h | 260 +++++++++++++++++++++ 5 files changed, 274 insertions(+), 284 deletions(-) create mode 100644 include/linux/serial_s3c.h (limited to 'include/linux') diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c index 04b87ec92537..1069b5680826 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2440.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c @@ -123,6 +123,11 @@ static struct clk s3c2440_clk_ac97 = { .ctrlbit = S3C2440_CLKCON_AC97, }; +#define S3C24XX_VA_UART0 (S3C_VA_UART) +#define S3C24XX_VA_UART1 (S3C_VA_UART + 0x4000 ) +#define S3C24XX_VA_UART2 (S3C_VA_UART + 0x8000 ) +#define S3C24XX_VA_UART3 (S3C_VA_UART + 0xC000 ) + static unsigned long s3c2440_fclk_n_getrate(struct clk *clk) { unsigned long ucon0, ucon1, ucon2, divisor; diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 6bcf87f65f9e..92e609440c57 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -239,6 +239,11 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) /* Serial port registrations */ +#define S3C2410_PA_UART0 (S3C24XX_PA_UART) +#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 ) +#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 ) +#define S3C2443_PA_UART3 (S3C24XX_PA_UART + 0xC000 ) + static struct resource s3c2410_uart0_resource[] = { [0] = DEFINE_RES_MEM(S3C2410_PA_UART0, SZ_16K), [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX0, \ diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h index 29c26a818842..f05f2afa440d 100644 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h @@ -1,281 +1 @@ -/* arch/arm/plat-samsung/include/plat/regs-serial.h - * - * From linux/include/asm-arm/hardware/serial_s3c2410.h - * - * Internal header file for Samsung S3C2410 serial ports (UART0-2) - * - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * - * Additional defines, Copyright 2003 Simtec Electronics (linux@simtec.co.uk) - * - * Adapted from: - * - * Internal header file for MX1ADS serial ports (UART1 & 2) - * - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#ifndef __ASM_ARM_REGS_SERIAL_H -#define __ASM_ARM_REGS_SERIAL_H - -#define S3C24XX_VA_UART0 (S3C_VA_UART) -#define S3C24XX_VA_UART1 (S3C_VA_UART + 0x4000 ) -#define S3C24XX_VA_UART2 (S3C_VA_UART + 0x8000 ) -#define S3C24XX_VA_UART3 (S3C_VA_UART + 0xC000 ) - -#define S3C2410_PA_UART0 (S3C24XX_PA_UART) -#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 ) -#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 ) -#define S3C2443_PA_UART3 (S3C24XX_PA_UART + 0xC000 ) - -#define S3C2410_URXH (0x24) -#define S3C2410_UTXH (0x20) -#define S3C2410_ULCON (0x00) -#define S3C2410_UCON (0x04) -#define S3C2410_UFCON (0x08) -#define S3C2410_UMCON (0x0C) -#define S3C2410_UBRDIV (0x28) -#define S3C2410_UTRSTAT (0x10) -#define S3C2410_UERSTAT (0x14) -#define S3C2410_UFSTAT (0x18) -#define S3C2410_UMSTAT (0x1C) - -#define S3C2410_LCON_CFGMASK ((0xF<<3)|(0x3)) - -#define S3C2410_LCON_CS5 (0x0) -#define S3C2410_LCON_CS6 (0x1) -#define S3C2410_LCON_CS7 (0x2) -#define S3C2410_LCON_CS8 (0x3) -#define S3C2410_LCON_CSMASK (0x3) - -#define S3C2410_LCON_PNONE (0x0) -#define S3C2410_LCON_PEVEN (0x5 << 3) -#define S3C2410_LCON_PODD (0x4 << 3) -#define S3C2410_LCON_PMASK (0x7 << 3) - -#define S3C2410_LCON_STOPB (1<<2) -#define S3C2410_LCON_IRM (1<<6) - -#define S3C2440_UCON_CLKMASK (3<<10) -#define S3C2440_UCON_CLKSHIFT (10) -#define S3C2440_UCON_PCLK (0<<10) -#define S3C2440_UCON_UCLK (1<<10) -#define S3C2440_UCON_PCLK2 (2<<10) -#define S3C2440_UCON_FCLK (3<<10) -#define S3C2443_UCON_EPLL (3<<10) - -#define S3C6400_UCON_CLKMASK (3<<10) -#define S3C6400_UCON_CLKSHIFT (10) -#define S3C6400_UCON_PCLK (0<<10) -#define S3C6400_UCON_PCLK2 (2<<10) -#define S3C6400_UCON_UCLK0 (1<<10) -#define S3C6400_UCON_UCLK1 (3<<10) - -#define S3C2440_UCON2_FCLK_EN (1<<15) -#define S3C2440_UCON0_DIVMASK (15 << 12) -#define S3C2440_UCON1_DIVMASK (15 << 12) -#define S3C2440_UCON2_DIVMASK (7 << 12) -#define S3C2440_UCON_DIVSHIFT (12) - -#define S3C2412_UCON_CLKMASK (3<<10) -#define S3C2412_UCON_CLKSHIFT (10) -#define S3C2412_UCON_UCLK (1<<10) -#define S3C2412_UCON_USYSCLK (3<<10) -#define S3C2412_UCON_PCLK (0<<10) -#define S3C2412_UCON_PCLK2 (2<<10) - -#define S3C2410_UCON_CLKMASK (1 << 10) -#define S3C2410_UCON_CLKSHIFT (10) -#define S3C2410_UCON_UCLK (1<<10) -#define S3C2410_UCON_SBREAK (1<<4) - -#define S3C2410_UCON_TXILEVEL (1<<9) -#define S3C2410_UCON_RXILEVEL (1<<8) -#define S3C2410_UCON_TXIRQMODE (1<<2) -#define S3C2410_UCON_RXIRQMODE (1<<0) -#define S3C2410_UCON_RXFIFO_TOI (1<<7) -#define S3C2443_UCON_RXERR_IRQEN (1<<6) -#define S3C2443_UCON_LOOPBACK (1<<5) - -#define S3C2410_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI) - -#define S3C2410_UFCON_FIFOMODE (1<<0) -#define S3C2410_UFCON_TXTRIG0 (0<<6) -#define S3C2410_UFCON_RXTRIG8 (1<<4) -#define S3C2410_UFCON_RXTRIG12 (2<<4) - -/* S3C2440 FIFO trigger levels */ -#define S3C2440_UFCON_RXTRIG1 (0<<4) -#define S3C2440_UFCON_RXTRIG8 (1<<4) -#define S3C2440_UFCON_RXTRIG16 (2<<4) -#define S3C2440_UFCON_RXTRIG32 (3<<4) - -#define S3C2440_UFCON_TXTRIG0 (0<<6) -#define S3C2440_UFCON_TXTRIG16 (1<<6) -#define S3C2440_UFCON_TXTRIG32 (2<<6) -#define S3C2440_UFCON_TXTRIG48 (3<<6) - -#define S3C2410_UFCON_RESETBOTH (3<<1) -#define S3C2410_UFCON_RESETTX (1<<2) -#define S3C2410_UFCON_RESETRX (1<<1) - -#define S3C2410_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S3C2410_UFCON_TXTRIG0 | \ - S3C2410_UFCON_RXTRIG8 ) - -#define S3C2410_UMCOM_AFC (1<<4) -#define S3C2410_UMCOM_RTS_LOW (1<<0) - -#define S3C2412_UMCON_AFC_63 (0<<5) /* same as s3c2443 */ -#define S3C2412_UMCON_AFC_56 (1<<5) -#define S3C2412_UMCON_AFC_48 (2<<5) -#define S3C2412_UMCON_AFC_40 (3<<5) -#define S3C2412_UMCON_AFC_32 (4<<5) -#define S3C2412_UMCON_AFC_24 (5<<5) -#define S3C2412_UMCON_AFC_16 (6<<5) -#define S3C2412_UMCON_AFC_8 (7<<5) - -#define S3C2410_UFSTAT_TXFULL (1<<9) -#define S3C2410_UFSTAT_RXFULL (1<<8) -#define S3C2410_UFSTAT_TXMASK (15<<4) -#define S3C2410_UFSTAT_TXSHIFT (4) -#define S3C2410_UFSTAT_RXMASK (15<<0) -#define S3C2410_UFSTAT_RXSHIFT (0) - -/* UFSTAT S3C2443 same as S3C2440 */ -#define S3C2440_UFSTAT_TXFULL (1<<14) -#define S3C2440_UFSTAT_RXFULL (1<<6) -#define S3C2440_UFSTAT_TXSHIFT (8) -#define S3C2440_UFSTAT_RXSHIFT (0) -#define S3C2440_UFSTAT_TXMASK (63<<8) -#define S3C2440_UFSTAT_RXMASK (63) - -#define S3C2410_UTRSTAT_TXE (1<<2) -#define S3C2410_UTRSTAT_TXFE (1<<1) -#define S3C2410_UTRSTAT_RXDR (1<<0) - -#define S3C2410_UERSTAT_OVERRUN (1<<0) -#define S3C2410_UERSTAT_FRAME (1<<2) -#define S3C2410_UERSTAT_BREAK (1<<3) -#define S3C2443_UERSTAT_PARITY (1<<1) - -#define S3C2410_UERSTAT_ANY (S3C2410_UERSTAT_OVERRUN | \ - S3C2410_UERSTAT_FRAME | \ - S3C2410_UERSTAT_BREAK) - -#define S3C2410_UMSTAT_CTS (1<<0) -#define S3C2410_UMSTAT_DeltaCTS (1<<2) - -#define S3C2443_DIVSLOT (0x2C) - -/* S3C64XX interrupt registers. */ -#define S3C64XX_UINTP 0x30 -#define S3C64XX_UINTSP 0x34 -#define S3C64XX_UINTM 0x38 - -#define S3C64XX_UINTM_RXD (0) -#define S3C64XX_UINTM_TXD (2) -#define S3C64XX_UINTM_RXD_MSK (1 << S3C64XX_UINTM_RXD) -#define S3C64XX_UINTM_TXD_MSK (1 << S3C64XX_UINTM_TXD) - -/* Following are specific to S5PV210 */ -#define S5PV210_UCON_CLKMASK (1<<10) -#define S5PV210_UCON_CLKSHIFT (10) -#define S5PV210_UCON_PCLK (0<<10) -#define S5PV210_UCON_UCLK (1<<10) - -#define S5PV210_UFCON_TXTRIG0 (0<<8) -#define S5PV210_UFCON_TXTRIG4 (1<<8) -#define S5PV210_UFCON_TXTRIG8 (2<<8) -#define S5PV210_UFCON_TXTRIG16 (3<<8) -#define S5PV210_UFCON_TXTRIG32 (4<<8) -#define S5PV210_UFCON_TXTRIG64 (5<<8) -#define S5PV210_UFCON_TXTRIG128 (6<<8) -#define S5PV210_UFCON_TXTRIG256 (7<<8) - -#define S5PV210_UFCON_RXTRIG1 (0<<4) -#define S5PV210_UFCON_RXTRIG4 (1<<4) -#define S5PV210_UFCON_RXTRIG8 (2<<4) -#define S5PV210_UFCON_RXTRIG16 (3<<4) -#define S5PV210_UFCON_RXTRIG32 (4<<4) -#define S5PV210_UFCON_RXTRIG64 (5<<4) -#define S5PV210_UFCON_RXTRIG128 (6<<4) -#define S5PV210_UFCON_RXTRIG256 (7<<4) - -#define S5PV210_UFSTAT_TXFULL (1<<24) -#define S5PV210_UFSTAT_RXFULL (1<<8) -#define S5PV210_UFSTAT_TXMASK (255<<16) -#define S5PV210_UFSTAT_TXSHIFT (16) -#define S5PV210_UFSTAT_RXMASK (255<<0) -#define S5PV210_UFSTAT_RXSHIFT (0) - -#define S3C2410_UCON_CLKSEL0 (1 << 0) -#define S3C2410_UCON_CLKSEL1 (1 << 1) -#define S3C2410_UCON_CLKSEL2 (1 << 2) -#define S3C2410_UCON_CLKSEL3 (1 << 3) - -/* Default values for s5pv210 UCON and UFCON uart registers */ -#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -#ifndef __ASSEMBLY__ - -/* configuration structure for per-machine configurations for the - * serial port - * - * the pointer is setup by the machine specific initialisation from the - * arch/arm/mach-s3c2410/ directory. -*/ - -struct s3c2410_uartcfg { - unsigned char hwport; /* hardware port number */ - unsigned char unused; - unsigned short flags; - upf_t uart_flags; /* default uart flags */ - unsigned int clk_sel; - - unsigned int has_fracval; - - unsigned long ucon; /* value of ucon for port */ - unsigned long ulcon; /* value of ulcon for port */ - unsigned long ufcon; /* value of ufcon for port */ -}; - -/* s3c24xx_uart_devs - * - * this is exported from the core as we cannot use driver_register(), - * or platform_add_device() before the console_initcall() -*/ - -extern struct platform_device *s3c24xx_uart_devs[4]; - -#endif /* __ASSEMBLY__ */ - -#endif /* __ASM_ARM_REGS_SERIAL_H */ - +#include diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index e91378b40d58..6a3695681fa5 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -39,6 +39,7 @@ #include #include #include +#include #include #include #include @@ -46,10 +47,9 @@ #include -#include - -#include +#ifdef CONFIG_SAMSUNG_CLOCK #include +#endif #include "samsung.h" diff --git a/include/linux/serial_s3c.h b/include/linux/serial_s3c.h new file mode 100644 index 000000000000..907d9d1d56cf --- /dev/null +++ b/include/linux/serial_s3c.h @@ -0,0 +1,260 @@ +/* + * Internal header file for Samsung S3C2410 serial ports (UART0-2) + * + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * + * Additional defines, Copyright 2003 Simtec Electronics (linux@simtec.co.uk) + * + * Adapted from: + * + * Internal header file for MX1ADS serial ports (UART1 & 2) + * + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#ifndef __ASM_ARM_REGS_SERIAL_H +#define __ASM_ARM_REGS_SERIAL_H + +#define S3C2410_URXH (0x24) +#define S3C2410_UTXH (0x20) +#define S3C2410_ULCON (0x00) +#define S3C2410_UCON (0x04) +#define S3C2410_UFCON (0x08) +#define S3C2410_UMCON (0x0C) +#define S3C2410_UBRDIV (0x28) +#define S3C2410_UTRSTAT (0x10) +#define S3C2410_UERSTAT (0x14) +#define S3C2410_UFSTAT (0x18) +#define S3C2410_UMSTAT (0x1C) + +#define S3C2410_LCON_CFGMASK ((0xF<<3)|(0x3)) + +#define S3C2410_LCON_CS5 (0x0) +#define S3C2410_LCON_CS6 (0x1) +#define S3C2410_LCON_CS7 (0x2) +#define S3C2410_LCON_CS8 (0x3) +#define S3C2410_LCON_CSMASK (0x3) + +#define S3C2410_LCON_PNONE (0x0) +#define S3C2410_LCON_PEVEN (0x5 << 3) +#define S3C2410_LCON_PODD (0x4 << 3) +#define S3C2410_LCON_PMASK (0x7 << 3) + +#define S3C2410_LCON_STOPB (1<<2) +#define S3C2410_LCON_IRM (1<<6) + +#define S3C2440_UCON_CLKMASK (3<<10) +#define S3C2440_UCON_CLKSHIFT (10) +#define S3C2440_UCON_PCLK (0<<10) +#define S3C2440_UCON_UCLK (1<<10) +#define S3C2440_UCON_PCLK2 (2<<10) +#define S3C2440_UCON_FCLK (3<<10) +#define S3C2443_UCON_EPLL (3<<10) + +#define S3C6400_UCON_CLKMASK (3<<10) +#define S3C6400_UCON_CLKSHIFT (10) +#define S3C6400_UCON_PCLK (0<<10) +#define S3C6400_UCON_PCLK2 (2<<10) +#define S3C6400_UCON_UCLK0 (1<<10) +#define S3C6400_UCON_UCLK1 (3<<10) + +#define S3C2440_UCON2_FCLK_EN (1<<15) +#define S3C2440_UCON0_DIVMASK (15 << 12) +#define S3C2440_UCON1_DIVMASK (15 << 12) +#define S3C2440_UCON2_DIVMASK (7 << 12) +#define S3C2440_UCON_DIVSHIFT (12) + +#define S3C2412_UCON_CLKMASK (3<<10) +#define S3C2412_UCON_CLKSHIFT (10) +#define S3C2412_UCON_UCLK (1<<10) +#define S3C2412_UCON_USYSCLK (3<<10) +#define S3C2412_UCON_PCLK (0<<10) +#define S3C2412_UCON_PCLK2 (2<<10) + +#define S3C2410_UCON_CLKMASK (1 << 10) +#define S3C2410_UCON_CLKSHIFT (10) +#define S3C2410_UCON_UCLK (1<<10) +#define S3C2410_UCON_SBREAK (1<<4) + +#define S3C2410_UCON_TXILEVEL (1<<9) +#define S3C2410_UCON_RXILEVEL (1<<8) +#define S3C2410_UCON_TXIRQMODE (1<<2) +#define S3C2410_UCON_RXIRQMODE (1<<0) +#define S3C2410_UCON_RXFIFO_TOI (1<<7) +#define S3C2443_UCON_RXERR_IRQEN (1<<6) +#define S3C2443_UCON_LOOPBACK (1<<5) + +#define S3C2410_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI) + +#define S3C2410_UFCON_FIFOMODE (1<<0) +#define S3C2410_UFCON_TXTRIG0 (0<<6) +#define S3C2410_UFCON_RXTRIG8 (1<<4) +#define S3C2410_UFCON_RXTRIG12 (2<<4) + +/* S3C2440 FIFO trigger levels */ +#define S3C2440_UFCON_RXTRIG1 (0<<4) +#define S3C2440_UFCON_RXTRIG8 (1<<4) +#define S3C2440_UFCON_RXTRIG16 (2<<4) +#define S3C2440_UFCON_RXTRIG32 (3<<4) + +#define S3C2440_UFCON_TXTRIG0 (0<<6) +#define S3C2440_UFCON_TXTRIG16 (1<<6) +#define S3C2440_UFCON_TXTRIG32 (2<<6) +#define S3C2440_UFCON_TXTRIG48 (3<<6) + +#define S3C2410_UFCON_RESETBOTH (3<<1) +#define S3C2410_UFCON_RESETTX (1<<2) +#define S3C2410_UFCON_RESETRX (1<<1) + +#define S3C2410_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S3C2410_UFCON_TXTRIG0 | \ + S3C2410_UFCON_RXTRIG8 ) + +#define S3C2410_UMCOM_AFC (1<<4) +#define S3C2410_UMCOM_RTS_LOW (1<<0) + +#define S3C2412_UMCON_AFC_63 (0<<5) /* same as s3c2443 */ +#define S3C2412_UMCON_AFC_56 (1<<5) +#define S3C2412_UMCON_AFC_48 (2<<5) +#define S3C2412_UMCON_AFC_40 (3<<5) +#define S3C2412_UMCON_AFC_32 (4<<5) +#define S3C2412_UMCON_AFC_24 (5<<5) +#define S3C2412_UMCON_AFC_16 (6<<5) +#define S3C2412_UMCON_AFC_8 (7<<5) + +#define S3C2410_UFSTAT_TXFULL (1<<9) +#define S3C2410_UFSTAT_RXFULL (1<<8) +#define S3C2410_UFSTAT_TXMASK (15<<4) +#define S3C2410_UFSTAT_TXSHIFT (4) +#define S3C2410_UFSTAT_RXMASK (15<<0) +#define S3C2410_UFSTAT_RXSHIFT (0) + +/* UFSTAT S3C2443 same as S3C2440 */ +#define S3C2440_UFSTAT_TXFULL (1<<14) +#define S3C2440_UFSTAT_RXFULL (1<<6) +#define S3C2440_UFSTAT_TXSHIFT (8) +#define S3C2440_UFSTAT_RXSHIFT (0) +#define S3C2440_UFSTAT_TXMASK (63<<8) +#define S3C2440_UFSTAT_RXMASK (63) + +#define S3C2410_UTRSTAT_TXE (1<<2) +#define S3C2410_UTRSTAT_TXFE (1<<1) +#define S3C2410_UTRSTAT_RXDR (1<<0) + +#define S3C2410_UERSTAT_OVERRUN (1<<0) +#define S3C2410_UERSTAT_FRAME (1<<2) +#define S3C2410_UERSTAT_BREAK (1<<3) +#define S3C2443_UERSTAT_PARITY (1<<1) + +#define S3C2410_UERSTAT_ANY (S3C2410_UERSTAT_OVERRUN | \ + S3C2410_UERSTAT_FRAME | \ + S3C2410_UERSTAT_BREAK) + +#define S3C2410_UMSTAT_CTS (1<<0) +#define S3C2410_UMSTAT_DeltaCTS (1<<2) + +#define S3C2443_DIVSLOT (0x2C) + +/* S3C64XX interrupt registers. */ +#define S3C64XX_UINTP 0x30 +#define S3C64XX_UINTSP 0x34 +#define S3C64XX_UINTM 0x38 + +#define S3C64XX_UINTM_RXD (0) +#define S3C64XX_UINTM_TXD (2) +#define S3C64XX_UINTM_RXD_MSK (1 << S3C64XX_UINTM_RXD) +#define S3C64XX_UINTM_TXD_MSK (1 << S3C64XX_UINTM_TXD) + +/* Following are specific to S5PV210 */ +#define S5PV210_UCON_CLKMASK (1<<10) +#define S5PV210_UCON_CLKSHIFT (10) +#define S5PV210_UCON_PCLK (0<<10) +#define S5PV210_UCON_UCLK (1<<10) + +#define S5PV210_UFCON_TXTRIG0 (0<<8) +#define S5PV210_UFCON_TXTRIG4 (1<<8) +#define S5PV210_UFCON_TXTRIG8 (2<<8) +#define S5PV210_UFCON_TXTRIG16 (3<<8) +#define S5PV210_UFCON_TXTRIG32 (4<<8) +#define S5PV210_UFCON_TXTRIG64 (5<<8) +#define S5PV210_UFCON_TXTRIG128 (6<<8) +#define S5PV210_UFCON_TXTRIG256 (7<<8) + +#define S5PV210_UFCON_RXTRIG1 (0<<4) +#define S5PV210_UFCON_RXTRIG4 (1<<4) +#define S5PV210_UFCON_RXTRIG8 (2<<4) +#define S5PV210_UFCON_RXTRIG16 (3<<4) +#define S5PV210_UFCON_RXTRIG32 (4<<4) +#define S5PV210_UFCON_RXTRIG64 (5<<4) +#define S5PV210_UFCON_RXTRIG128 (6<<4) +#define S5PV210_UFCON_RXTRIG256 (7<<4) + +#define S5PV210_UFSTAT_TXFULL (1<<24) +#define S5PV210_UFSTAT_RXFULL (1<<8) +#define S5PV210_UFSTAT_TXMASK (255<<16) +#define S5PV210_UFSTAT_TXSHIFT (16) +#define S5PV210_UFSTAT_RXMASK (255<<0) +#define S5PV210_UFSTAT_RXSHIFT (0) + +#define S3C2410_UCON_CLKSEL0 (1 << 0) +#define S3C2410_UCON_CLKSEL1 (1 << 1) +#define S3C2410_UCON_CLKSEL2 (1 << 2) +#define S3C2410_UCON_CLKSEL3 (1 << 3) + +/* Default values for s5pv210 UCON and UFCON uart registers */ +#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +#ifndef __ASSEMBLY__ + +/* configuration structure for per-machine configurations for the + * serial port + * + * the pointer is setup by the machine specific initialisation from the + * arch/arm/mach-s3c2410/ directory. +*/ + +struct s3c2410_uartcfg { + unsigned char hwport; /* hardware port number */ + unsigned char unused; + unsigned short flags; + upf_t uart_flags; /* default uart flags */ + unsigned int clk_sel; + + unsigned int has_fracval; + + unsigned long ucon; /* value of ucon for port */ + unsigned long ulcon; /* value of ulcon for port */ + unsigned long ufcon; /* value of ufcon for port */ +}; + +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_ARM_REGS_SERIAL_H */ + -- cgit v1.2.3 From 31815c08fc90f44d6165034fd473f23df5d31449 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 13 Apr 2013 08:46:58 +0400 Subject: serial: sccnxp: Replace pdata.init/exit with regulator API Typical usage of pdata.init/exit is enable/disable power and/or toggle reset for the target chip. This patch replaces these callbacks with regulator API. Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sccnxp.c | 21 +++++++++++++++------ include/linux/platform_data/serial-sccnxp.h | 4 ---- 2 files changed, 15 insertions(+), 10 deletions(-) (limited to 'include/linux') diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c index b1d04aabd50c..c77304155410 100644 --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -27,6 +27,7 @@ #include #include #include +#include #define SCCNXP_NAME "uart-sccnxp" #define SCCNXP_MAJOR 204 @@ -131,6 +132,8 @@ struct sccnxp_port { struct timer_list timer; struct sccnxp_pdata pdata; + + struct regulator *regulator; }; static inline u8 sccnxp_raw_read(void __iomem *base, u8 reg, u8 shift) @@ -916,6 +919,16 @@ static int sccnxp_probe(struct platform_device *pdev) goto err_out; } + s->regulator = devm_regulator_get(&pdev->dev, "VCC"); + if (!IS_ERR(s->regulator)) { + ret = regulator_enable(s->regulator); + if (ret) { + dev_err(&pdev->dev, + "Failed to enable regulator: %i\n", ret); + return ret; + } + } + membase = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(membase)) { ret = PTR_ERR(membase); @@ -965,10 +978,6 @@ static int sccnxp_probe(struct platform_device *pdev) s->imr = 0; sccnxp_write(&s->port[0], SCCNXP_IMR_REG, 0); - /* Board specific configure */ - if (s->pdata.init) - s->pdata.init(); - if (!s->poll) { ret = devm_request_threaded_irq(&pdev->dev, s->irq, NULL, sccnxp_ist, @@ -1009,8 +1018,8 @@ static int sccnxp_remove(struct platform_device *pdev) uart_unregister_driver(&s->uart); platform_set_drvdata(pdev, NULL); - if (s->pdata.exit) - s->pdata.exit(); + if (!IS_ERR(s->regulator)) + return regulator_disable(s->regulator); return 0; } diff --git a/include/linux/platform_data/serial-sccnxp.h b/include/linux/platform_data/serial-sccnxp.h index 215574d1e81d..bdc510d03245 100644 --- a/include/linux/platform_data/serial-sccnxp.h +++ b/include/linux/platform_data/serial-sccnxp.h @@ -86,10 +86,6 @@ struct sccnxp_pdata { const u32 mctrl_cfg[SCCNXP_MAX_UARTS]; /* Timer value for polling mode (usecs) */ const unsigned int poll_time_us; - /* Called during startup */ - void (*init)(void); - /* Called before finish */ - void (*exit)(void); }; #endif -- cgit v1.2.3