From 9f365cb8bbd0162963d6852651d7c9e30adcb7b5 Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Tue, 14 May 2024 13:47:23 -0700 Subject: scsi: mpi3mr: Use proper format specifier in mpi3mr_sas_port_add() When building for a 32-bit platform such as ARM or i386, for which size_t is unsigned int, there is a warning due to using an unsigned long format specifier: drivers/scsi/mpi3mr/mpi3mr_transport.c:1370:11: error: format specifies type 'unsigned long' but the argument has type 'unsigned int' [-Werror,-Wformat] 1369 | ioc_warn(mrioc, "skipping port %u, max allowed value is %lu\n", | ~~~ | %u 1370 | i, sizeof(mr_sas_port->phy_mask) * 8); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Use the proper format specifier for size_t, %zu, to resolve the warning for all platforms. Fixes: 3668651def2c ("scsi: mpi3mr: Sanitise num_phys") Signed-off-by: Nathan Chancellor Link: https://lore.kernel.org/r/20240514-mpi3mr-fix-wformat-v1-1-f1ad49217e5e@kernel.org Signed-off-by: Martin K. Petersen --- drivers/scsi/mpi3mr/mpi3mr_transport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/mpi3mr/mpi3mr_transport.c b/drivers/scsi/mpi3mr/mpi3mr_transport.c index 7ca9a7c2709c..5d261c2f2d20 100644 --- a/drivers/scsi/mpi3mr/mpi3mr_transport.c +++ b/drivers/scsi/mpi3mr/mpi3mr_transport.c @@ -1366,7 +1366,7 @@ static struct mpi3mr_sas_port *mpi3mr_sas_port_add(struct mpi3mr_ioc *mrioc, continue; if (i > sizeof(mr_sas_port->phy_mask) * 8) { - ioc_warn(mrioc, "skipping port %u, max allowed value is %lu\n", + ioc_warn(mrioc, "skipping port %u, max allowed value is %zu\n", i, sizeof(mr_sas_port->phy_mask) * 8); goto out_fail; } -- cgit v1.2.3 From 10157b1fc1a762293381e9145041253420dfc6ad Mon Sep 17 00:00:00 2001 From: Martin Wilck Date: Tue, 14 May 2024 16:03:44 +0200 Subject: scsi: core: alua: I/O errors for ALUA state transitions When a host is configured with a few LUNs and I/O is running, injecting FC faults repeatedly leads to path recovery problems. The LUNs have 4 paths each and 3 of them come back active after say an FC fault which makes 2 of the paths go down, instead of all 4. This happens after several iterations of continuous FC faults. Reason here is that we're returning an I/O error whenever we're encountering sense code 06/04/0a (LOGICAL UNIT NOT ACCESSIBLE, ASYMMETRIC ACCESS STATE TRANSITION) instead of retrying. [mwilck: The original patch was developed by Rajashekhar M A and Hannes Reinecke. I moved the code to alua_check_sense() as suggested by Mike Christie [1]. Evan Milne had raised the question whether pg->state should be set to transitioning in the UA case [2]. I believe that doing this is correct. SCSI_ACCESS_STATE_TRANSITIONING by itself doesn't cause I/O errors. Our handler schedules an RTPG, which will only result in an I/O error condition if the transitioning timeout expires.] [1] https://lore.kernel.org/all/0bc96e82-fdda-4187-148d-5b34f81d4942@oracle.com/ [2] https://lore.kernel.org/all/CAGtn9r=kicnTDE2o7Gt5Y=yoidHYD7tG8XdMHEBJTBraVEoOCw@mail.gmail.com/ Co-developed-by: Rajashekhar M A Co-developed-by: Hannes Reinecke Signed-off-by: Hannes Reinecke Signed-off-by: Martin Wilck Link: https://lore.kernel.org/r/20240514140344.19538-1-mwilck@suse.com Reviewed-by: Damien Le Moal Reviewed-by: Christoph Hellwig Reviewed-by: Mike Christie Signed-off-by: Martin K. Petersen --- drivers/scsi/device_handler/scsi_dh_alua.c | 31 +++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index a226dc1b65d7..4eb0837298d4 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -414,28 +414,40 @@ static char print_alua_state(unsigned char state) } } -static enum scsi_disposition alua_check_sense(struct scsi_device *sdev, - struct scsi_sense_hdr *sense_hdr) +static void alua_handle_state_transition(struct scsi_device *sdev) { struct alua_dh_data *h = sdev->handler_data; struct alua_port_group *pg; + rcu_read_lock(); + pg = rcu_dereference(h->pg); + if (pg) + pg->state = SCSI_ACCESS_STATE_TRANSITIONING; + rcu_read_unlock(); + alua_check(sdev, false); +} + +static enum scsi_disposition alua_check_sense(struct scsi_device *sdev, + struct scsi_sense_hdr *sense_hdr) +{ switch (sense_hdr->sense_key) { case NOT_READY: if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0a) { /* * LUN Not Accessible - ALUA state transition */ - rcu_read_lock(); - pg = rcu_dereference(h->pg); - if (pg) - pg->state = SCSI_ACCESS_STATE_TRANSITIONING; - rcu_read_unlock(); - alua_check(sdev, false); + alua_handle_state_transition(sdev); return NEEDS_RETRY; } break; case UNIT_ATTENTION: + if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0a) { + /* + * LUN Not Accessible - ALUA state transition + */ + alua_handle_state_transition(sdev); + return NEEDS_RETRY; + } if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00) { /* * Power On, Reset, or Bus Device Reset. @@ -502,7 +514,8 @@ static int alua_tur(struct scsi_device *sdev) retval = scsi_test_unit_ready(sdev, ALUA_FAILOVER_TIMEOUT * HZ, ALUA_FAILOVER_RETRIES, &sense_hdr); - if (sense_hdr.sense_key == NOT_READY && + if ((sense_hdr.sense_key == NOT_READY || + sense_hdr.sense_key == UNIT_ATTENTION) && sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x0a) return SCSI_DH_RETRY; else if (retval) -- cgit v1.2.3 From 9fad9d560af5c654bb38e0b07ee54a4e9acdc5cd Mon Sep 17 00:00:00 2001 From: Justin Stitt Date: Wed, 8 May 2024 17:22:51 +0000 Subject: scsi: sr: Fix unintentional arithmetic wraparound Running syzkaller with the newly reintroduced signed integer overflow sanitizer produces this report: [ 65.194362] ------------[ cut here ]------------ [ 65.197752] UBSAN: signed-integer-overflow in ../drivers/scsi/sr_ioctl.c:436:9 [ 65.203607] -2147483648 * 177 cannot be represented in type 'int' [ 65.207911] CPU: 2 PID: 10416 Comm: syz-executor.1 Not tainted 6.8.0-rc2-00035-gb3ef86b5a957 #1 [ 65.213585] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 65.219923] Call Trace: [ 65.221556] [ 65.223029] dump_stack_lvl+0x93/0xd0 [ 65.225573] handle_overflow+0x171/0x1b0 [ 65.228219] sr_select_speed+0xeb/0xf0 [ 65.230786] ? __pm_runtime_resume+0xe6/0x130 [ 65.233606] sr_block_ioctl+0x15d/0x1d0 ... Historically, the signed integer overflow sanitizer did not work in the kernel due to its interaction with `-fwrapv` but this has since been changed [1] in the newest version of Clang. It was re-enabled in the kernel with Commit 557f8c582a9b ("ubsan: Reintroduce signed overflow sanitizer"). Firstly, let's change the type of "speed" to unsigned long as sr_select_speed()'s only caller passes in an unsigned long anyways. $ git grep '\.select_speed' | drivers/scsi/sr.c: .select_speed = sr_select_speed, ... | static int cdrom_ioctl_select_speed(struct cdrom_device_info *cdi, | unsigned long arg) | { | ... | return cdi->ops->select_speed(cdi, arg); | } Next, let's add an extra check to make sure we don't exceed 0xffff/177 (350) since 0xffff is the max speed. This has two benefits: 1) we deal with integer overflow before it happens and 2) we properly respect the max speed of 0xffff. There are some "magic" numbers here but I did not want to change more than what was necessary. Link: https://github.com/llvm/llvm-project/pull/82432 [1] Closes: https://github.com/KSPP/linux/issues/357 Cc: linux-hardening@vger.kernel.org Signed-off-by: Justin Stitt Link: https://lore.kernel.org/r/20240508-b4-b4-sio-sr_select_speed-v2-1-00b68f724290@google.com Reviewed-by: Kees Cook Signed-off-by: Martin K. Petersen --- Documentation/cdrom/cdrom-standard.rst | 4 ++-- drivers/scsi/sr.h | 2 +- drivers/scsi/sr_ioctl.c | 5 ++++- include/linux/cdrom.h | 2 +- 4 files changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/Documentation/cdrom/cdrom-standard.rst b/Documentation/cdrom/cdrom-standard.rst index 7964fe134277..6c1303cff159 100644 --- a/Documentation/cdrom/cdrom-standard.rst +++ b/Documentation/cdrom/cdrom-standard.rst @@ -217,7 +217,7 @@ current *struct* is:: int (*media_changed)(struct cdrom_device_info *, int); int (*tray_move)(struct cdrom_device_info *, int); int (*lock_door)(struct cdrom_device_info *, int); - int (*select_speed)(struct cdrom_device_info *, int); + int (*select_speed)(struct cdrom_device_info *, unsigned long); int (*get_last_session) (struct cdrom_device_info *, struct cdrom_multisession *); int (*get_mcn)(struct cdrom_device_info *, struct cdrom_mcn *); @@ -396,7 +396,7 @@ action need be taken, and the return value should be 0. :: - int select_speed(struct cdrom_device_info *cdi, int speed) + int select_speed(struct cdrom_device_info *cdi, unsigned long speed) Some CD-ROM drives are capable of changing their head-speed. There are several reasons for changing the speed of a CD-ROM drive. Badly diff --git a/drivers/scsi/sr.h b/drivers/scsi/sr.h index 1175f2e213b5..dc899277b3a4 100644 --- a/drivers/scsi/sr.h +++ b/drivers/scsi/sr.h @@ -65,7 +65,7 @@ int sr_disk_status(struct cdrom_device_info *); int sr_get_last_session(struct cdrom_device_info *, struct cdrom_multisession *); int sr_get_mcn(struct cdrom_device_info *, struct cdrom_mcn *); int sr_reset(struct cdrom_device_info *); -int sr_select_speed(struct cdrom_device_info *cdi, int speed); +int sr_select_speed(struct cdrom_device_info *cdi, unsigned long speed); int sr_audio_ioctl(struct cdrom_device_info *, unsigned int, void *); int sr_is_xa(Scsi_CD *); diff --git a/drivers/scsi/sr_ioctl.c b/drivers/scsi/sr_ioctl.c index 5b0b35e60e61..a0d2556a27bb 100644 --- a/drivers/scsi/sr_ioctl.c +++ b/drivers/scsi/sr_ioctl.c @@ -425,11 +425,14 @@ int sr_reset(struct cdrom_device_info *cdi) return 0; } -int sr_select_speed(struct cdrom_device_info *cdi, int speed) +int sr_select_speed(struct cdrom_device_info *cdi, unsigned long speed) { Scsi_CD *cd = cdi->handle; struct packet_command cgc; + /* avoid exceeding the max speed or overflowing integer bounds */ + speed = clamp(0, speed, 0xffff / 177); + if (speed == 0) speed = 0xffff; /* set to max */ else diff --git a/include/linux/cdrom.h b/include/linux/cdrom.h index 98c6fd0b39b6..fdfb61ccf55a 100644 --- a/include/linux/cdrom.h +++ b/include/linux/cdrom.h @@ -77,7 +77,7 @@ struct cdrom_device_ops { unsigned int clearing, int slot); int (*tray_move) (struct cdrom_device_info *, int); int (*lock_door) (struct cdrom_device_info *, int); - int (*select_speed) (struct cdrom_device_info *, int); + int (*select_speed) (struct cdrom_device_info *, unsigned long); int (*get_last_session) (struct cdrom_device_info *, struct cdrom_multisession *); int (*get_mcn) (struct cdrom_device_info *, -- cgit v1.2.3 From 51071f0831ea975fc045526dd7e17efe669dc6e1 Mon Sep 17 00:00:00 2001 From: Saurav Kashyap Date: Wed, 15 May 2024 14:40:59 +0530 Subject: scsi: qedf: Don't process stag work during unload and recovery Stag work can cause issues during unload and recovery, hence don't process it. Signed-off-by: Saurav Kashyap Signed-off-by: Nilesh Javali Link: https://lore.kernel.org/r/20240515091101.18754-2-skashyap@marvell.com Signed-off-by: Martin K. Petersen --- drivers/scsi/qedf/qedf_main.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c index fd12439cbaab..c457caae07b3 100644 --- a/drivers/scsi/qedf/qedf_main.c +++ b/drivers/scsi/qedf/qedf_main.c @@ -3997,6 +3997,22 @@ void qedf_stag_change_work(struct work_struct *work) struct qedf_ctx *qedf = container_of(work, struct qedf_ctx, stag_work.work); + if (!qedf) { + QEDF_ERR(&qedf->dbg_ctx, "qedf is NULL"); + return; + } + + if (test_bit(QEDF_IN_RECOVERY, &qedf->flags)) { + QEDF_ERR(&qedf->dbg_ctx, + "Already is in recovery, hence not calling software context reset.\n"); + return; + } + + if (test_bit(QEDF_UNLOADING, &qedf->flags)) { + QEDF_ERR(&qedf->dbg_ctx, "Driver unloading\n"); + return; + } + printk_ratelimited("[%s]:[%s:%d]:%d: Performing software context reset.", dev_name(&qedf->pdev->dev), __func__, __LINE__, qedf->dbg_ctx.host_no); -- cgit v1.2.3 From 78e88472b60936025b83eba57cffa59d3501dc07 Mon Sep 17 00:00:00 2001 From: Saurav Kashyap Date: Wed, 15 May 2024 14:41:00 +0530 Subject: scsi: qedf: Wait for stag work during unload If stag work is already scheduled and unload is called, it can lead to issues as unload cleans up the work element. Wait for stag work to get completed before cleanup during unload. Signed-off-by: Saurav Kashyap Signed-off-by: Nilesh Javali Link: https://lore.kernel.org/r/20240515091101.18754-3-skashyap@marvell.com Signed-off-by: Martin K. Petersen --- drivers/scsi/qedf/qedf.h | 1 + drivers/scsi/qedf/qedf_main.c | 30 +++++++++++++++++++++++++++--- 2 files changed, 28 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qedf/qedf.h b/drivers/scsi/qedf/qedf.h index 5058e01b65a2..98afdfe63600 100644 --- a/drivers/scsi/qedf/qedf.h +++ b/drivers/scsi/qedf/qedf.h @@ -363,6 +363,7 @@ struct qedf_ctx { #define QEDF_IN_RECOVERY 5 #define QEDF_DBG_STOP_IO 6 #define QEDF_PROBING 8 +#define QEDF_STAG_IN_PROGRESS 9 unsigned long flags; /* Miscellaneous state flags */ int fipvlan_retries; u8 num_queues; diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c index c457caae07b3..eca0190d9a82 100644 --- a/drivers/scsi/qedf/qedf_main.c +++ b/drivers/scsi/qedf/qedf_main.c @@ -318,11 +318,18 @@ static struct fc_seq *qedf_elsct_send(struct fc_lport *lport, u32 did, */ if (resp == fc_lport_flogi_resp) { qedf->flogi_cnt++; + qedf->flogi_pending++; + + if (test_bit(QEDF_UNLOADING, &qedf->flags)) { + QEDF_ERR(&qedf->dbg_ctx, "Driver unloading\n"); + qedf->flogi_pending = 0; + } + if (qedf->flogi_pending >= QEDF_FLOGI_RETRY_CNT) { schedule_delayed_work(&qedf->stag_work, 2); return NULL; } - qedf->flogi_pending++; + return fc_elsct_send(lport, did, fp, op, qedf_flogi_resp, arg, timeout); } @@ -912,13 +919,14 @@ void qedf_ctx_soft_reset(struct fc_lport *lport) struct qedf_ctx *qedf; struct qed_link_output if_link; + qedf = lport_priv(lport); + if (lport->vport) { + clear_bit(QEDF_STAG_IN_PROGRESS, &qedf->flags); printk_ratelimited("Cannot issue host reset on NPIV port.\n"); return; } - qedf = lport_priv(lport); - qedf->flogi_pending = 0; /* For host reset, essentially do a soft link up/down */ atomic_set(&qedf->link_state, QEDF_LINK_DOWN); @@ -938,6 +946,7 @@ void qedf_ctx_soft_reset(struct fc_lport *lport) if (!if_link.link_up) { QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC, "Physical link is not up.\n"); + clear_bit(QEDF_STAG_IN_PROGRESS, &qedf->flags); return; } /* Flush and wait to make sure link down is processed */ @@ -950,6 +959,7 @@ void qedf_ctx_soft_reset(struct fc_lport *lport) "Queue link up work.\n"); queue_delayed_work(qedf->link_update_wq, &qedf->link_update, 0); + clear_bit(QEDF_STAG_IN_PROGRESS, &qedf->flags); } /* Reset the host by gracefully logging out and then logging back in */ @@ -3721,6 +3731,7 @@ static void __qedf_remove(struct pci_dev *pdev, int mode) { struct qedf_ctx *qedf; int rc; + int cnt = 0; if (!pdev) { QEDF_ERR(NULL, "pdev is NULL.\n"); @@ -3738,6 +3749,17 @@ static void __qedf_remove(struct pci_dev *pdev, int mode) return; } +stag_in_prog: + if (test_bit(QEDF_STAG_IN_PROGRESS, &qedf->flags)) { + QEDF_ERR(&qedf->dbg_ctx, "Stag in progress, cnt=%d.\n", cnt); + cnt++; + + if (cnt < 5) { + msleep(500); + goto stag_in_prog; + } + } + if (mode != QEDF_MODE_RECOVERY) set_bit(QEDF_UNLOADING, &qedf->flags); @@ -4013,6 +4035,8 @@ void qedf_stag_change_work(struct work_struct *work) return; } + set_bit(QEDF_STAG_IN_PROGRESS, &qedf->flags); + printk_ratelimited("[%s]:[%s:%d]:%d: Performing software context reset.", dev_name(&qedf->pdev->dev), __func__, __LINE__, qedf->dbg_ctx.host_no); -- cgit v1.2.3 From 6c3bb589debd763dc4b94803ddf3c13b4fcca776 Mon Sep 17 00:00:00 2001 From: Saurav Kashyap Date: Wed, 15 May 2024 14:41:01 +0530 Subject: scsi: qedf: Set qed_slowpath_params to zero before use Zero qed_slowpath_params before use. Signed-off-by: Saurav Kashyap Signed-off-by: Nilesh Javali Link: https://lore.kernel.org/r/20240515091101.18754-4-skashyap@marvell.com Signed-off-by: Martin K. Petersen --- drivers/scsi/qedf/qedf_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c index eca0190d9a82..49adddf978cc 100644 --- a/drivers/scsi/qedf/qedf_main.c +++ b/drivers/scsi/qedf/qedf_main.c @@ -3473,6 +3473,7 @@ retry_probe: } /* Start the Slowpath-process */ + memset(&slowpath_params, 0, sizeof(struct qed_slowpath_params)); slowpath_params.int_mode = QED_INT_MODE_MSIX; slowpath_params.drv_major = QEDF_DRIVER_MAJOR_VER; slowpath_params.drv_minor = QEDF_DRIVER_MINOR_VER; -- cgit v1.2.3 From e4f5f8298cf6ddae43210d236ad65ac2c6379559 Mon Sep 17 00:00:00 2001 From: Deming Wang Date: Mon, 13 May 2024 07:59:56 -0400 Subject: scsi: mpt3sas: Add missing kerneldoc parameter descriptions Add missing kerneldoc parameter descriptions to _scsih_set_debug_level(). Signed-off-by: Deming Wang Link: https://lore.kernel.org/r/20240513115956.1576-1-wangdeming@inspur.com Signed-off-by: Martin K. Petersen --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 89ef43a5ef86..12d08d8ba538 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -302,8 +302,8 @@ struct _scsi_io_transfer { /** * _scsih_set_debug_level - global setting of ioc->logging_level. - * @val: ? - * @kp: ? + * @val: value of the parameter to be set + * @kp: pointer to kernel_param structure * * Note: The logging levels are defined in mpt3sas_debug.h. */ -- cgit v1.2.3 From 637c435f08ea7e77c53a2ad590b651d0de225e3b Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Thu, 16 May 2024 11:30:41 +0300 Subject: wifi: ath11k: Fix error path in ath11k_pcic_ext_irq_config If one of the dummy allocation fails in ath11k_pcic_ext_irq_config(), the previous allocated devices might leak due to returning without deallocating the devices. Instead of returning on the error path, deallocate all the previously allocated net_devices and then return. Fixes: bca592ead825 ("wifi: ath11k: allocate dummy net_device dynamically") Signed-off-by: Breno Leitao Reviewed-by: Simon Horman Signed-off-by: Kalle Valo Link: https://msgid.link/20240508185902.70975-1-leitao@debian.org --- drivers/net/wireless/ath/ath11k/pcic.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath11k/pcic.c b/drivers/net/wireless/ath/ath11k/pcic.c index 79eb3f9c902f..debe7c5919ef 100644 --- a/drivers/net/wireless/ath/ath11k/pcic.c +++ b/drivers/net/wireless/ath/ath11k/pcic.c @@ -561,6 +561,7 @@ static int ath11k_pcic_ext_irq_config(struct ath11k_base *ab) { int i, j, n, ret, num_vectors = 0; u32 user_base_data = 0, base_vector = 0; + struct ath11k_ext_irq_grp *irq_grp; unsigned long irq_flags; ret = ath11k_pcic_get_user_msi_assignment(ab, "DP", &num_vectors, @@ -574,14 +575,16 @@ static int ath11k_pcic_ext_irq_config(struct ath11k_base *ab) irq_flags |= IRQF_NOBALANCING; for (i = 0; i < ATH11K_EXT_IRQ_GRP_NUM_MAX; i++) { - struct ath11k_ext_irq_grp *irq_grp = &ab->ext_irq_grp[i]; + irq_grp = &ab->ext_irq_grp[i]; u32 num_irq = 0; irq_grp->ab = ab; irq_grp->grp_id = i; irq_grp->napi_ndev = alloc_netdev_dummy(0); - if (!irq_grp->napi_ndev) - return -ENOMEM; + if (!irq_grp->napi_ndev) { + ret = -ENOMEM; + goto fail_allocate; + } netif_napi_add(irq_grp->napi_ndev, &irq_grp->napi, ath11k_pcic_ext_grp_napi_poll); @@ -606,11 +609,8 @@ static int ath11k_pcic_ext_irq_config(struct ath11k_base *ab) int irq = ath11k_pcic_get_msi_irq(ab, vector); if (irq < 0) { - for (n = 0; n <= i; n++) { - irq_grp = &ab->ext_irq_grp[n]; - free_netdev(irq_grp->napi_ndev); - } - return irq; + ret = irq; + goto fail_irq; } ab->irq_num[irq_idx] = irq; @@ -635,6 +635,15 @@ static int ath11k_pcic_ext_irq_config(struct ath11k_base *ab) } return 0; +fail_irq: + /* i ->napi_ndev was properly allocated. Free it also */ + i += 1; +fail_allocate: + for (n = 0; n < i; n++) { + irq_grp = &ab->ext_irq_grp[n]; + free_netdev(irq_grp->napi_ndev); + } + return ret; } int ath11k_pcic_config_irq(struct ath11k_base *ab) -- cgit v1.2.3 From 21ae74e1bf18331ae5e279bd96304b3630828009 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Fri, 17 May 2024 10:00:28 +0300 Subject: wifi: ath10k: fix QCOM_RPROC_COMMON dependency If ath10k_snoc is built-in, while Qualcomm remoteprocs are built as modules, compilation fails with: /usr/bin/aarch64-linux-gnu-ld: drivers/net/wireless/ath/ath10k/snoc.o: in function `ath10k_modem_init': drivers/net/wireless/ath/ath10k/snoc.c:1534: undefined reference to `qcom_register_ssr_notifier' /usr/bin/aarch64-linux-gnu-ld: drivers/net/wireless/ath/ath10k/snoc.o: in function `ath10k_modem_deinit': drivers/net/wireless/ath/ath10k/snoc.c:1551: undefined reference to `qcom_unregister_ssr_notifier' Add corresponding dependency to ATH10K_SNOC Kconfig entry so that it's built as module if QCOM_RPROC_COMMON is built as module too. Fixes: 747ff7d3d742 ("ath10k: Don't always treat modem stop events as crashes") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Kalle Valo Link: https://msgid.link/20240511-ath10k-snoc-dep-v1-1-9666e3af5c27@linaro.org --- drivers/net/wireless/ath/ath10k/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig index e6ea884cafc1..4f385f4a8cef 100644 --- a/drivers/net/wireless/ath/ath10k/Kconfig +++ b/drivers/net/wireless/ath/ath10k/Kconfig @@ -45,6 +45,7 @@ config ATH10K_SNOC depends on ATH10K depends on ARCH_QCOM || COMPILE_TEST depends on QCOM_SMEM + depends on QCOM_RPROC_COMMON || QCOM_RPROC_COMMON=n select QCOM_SCM select QCOM_QMI_HELPERS help -- cgit v1.2.3 From 5134acb15d9ef27aa2b90aad46d4e89fcef79fdc Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Wed, 22 May 2024 10:32:43 -0700 Subject: efi/libstub: zboot.lds: Discard .discard sections When building ARCH=loongarch defconfig + CONFIG_UNWINDER_ORC=y using LLVM, there is a warning from ld.lld when linking the EFI zboot image due to the use of unreachable() in number() in vsprintf.c: ld.lld: warning: drivers/firmware/efi/libstub/lib.a(vsprintf.stub.o):(.discard.unreachable+0x0): has non-ABS relocation R_LARCH_32_PCREL against symbol '' If the compiler cannot eliminate the default case for any reason, the .discard.unreachable section will remain in the final binary but the entire point of any section prefixed with .discard is that it is only used at compile time, so it can be discarded via /DISCARD/ in a linker script. The asm-generic vmlinux.lds.h includes .discard and .discard.* in the COMMON_DISCARDS macro but that is not used for zboot.lds, as it is not a kernel image linker script. Add .discard and .discard.* to /DISCARD/ in zboot.lds, so that any sections meant to be discarded at link time are not included in the final zboot image. This issue is not specific to LoongArch, it is just the first architecture to select CONFIG_OBJTOOL, which defines annotate_unreachable() as an asm statement to add the .discard.unreachable section, and use the EFI stub. Closes: https://github.com/ClangBuiltLinux/linux/issues/2023 Signed-off-by: Nathan Chancellor Acked-by: Huacai Chen Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/libstub/zboot.lds | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/firmware/efi/libstub/zboot.lds b/drivers/firmware/efi/libstub/zboot.lds index ac8c0ef85158..af2c82f7bd90 100644 --- a/drivers/firmware/efi/libstub/zboot.lds +++ b/drivers/firmware/efi/libstub/zboot.lds @@ -41,6 +41,7 @@ SECTIONS } /DISCARD/ : { + *(.discard .discard.*) *(.modinfo .init.modinfo) } } -- cgit v1.2.3 From 7c23b186ab892088f76a3ad9dbff1685ffe2e832 Mon Sep 17 00:00:00 2001 From: "Guilherme G. Piccoli" Date: Sun, 19 May 2024 13:33:53 -0300 Subject: efi: pstore: Return proper errors on UEFI failures Right now efi-pstore either returns 0 (success) or -EIO; but we do have a function to convert UEFI errors in different standard error codes, helping to narrow down potential issues more accurately. So, let's use this helper here. Signed-off-by: Guilherme G. Piccoli Reviewed-by: Kees Cook Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/efi-pstore.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/efi/efi-pstore.c b/drivers/firmware/efi/efi-pstore.c index 5b9dc26e6bcb..552c78f5f059 100644 --- a/drivers/firmware/efi/efi-pstore.c +++ b/drivers/firmware/efi/efi-pstore.c @@ -136,7 +136,7 @@ static int efi_pstore_read_func(struct pstore_record *record, &size, record->buf); if (status != EFI_SUCCESS) { kfree(record->buf); - return -EIO; + return efi_status_to_err(status); } /* @@ -189,7 +189,7 @@ static ssize_t efi_pstore_read(struct pstore_record *record) return 0; if (status != EFI_SUCCESS) - return -EIO; + return efi_status_to_err(status); /* skip variables that don't concern us */ if (efi_guidcmp(guid, LINUX_EFI_CRASH_GUID)) @@ -227,7 +227,7 @@ static int efi_pstore_write(struct pstore_record *record) record->size, record->psi->buf, true); efivar_unlock(); - return status == EFI_SUCCESS ? 0 : -EIO; + return efi_status_to_err(status); }; static int efi_pstore_erase(struct pstore_record *record) @@ -238,7 +238,7 @@ static int efi_pstore_erase(struct pstore_record *record) PSTORE_EFI_ATTRIBUTES, 0, NULL); if (status != EFI_SUCCESS && status != EFI_NOT_FOUND) - return -EIO; + return efi_status_to_err(status); return 0; } -- cgit v1.2.3 From e6722ea6b9ed731f7392277d76ca912dfffca7ee Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sat, 6 Jan 2024 13:48:25 +0100 Subject: i2c: synquacer: Remove a clk reference from struct synquacer_i2c 'pclk' is only used locally in the probe. Remove it from the 'synquacer_i2c' structure. Also remove a useless debug message. Signed-off-by: Christophe JAILLET Acked-by: Ard Biesheuvel Signed-off-by: Andi Shyti --- drivers/i2c/busses/i2c-synquacer.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-synquacer.c b/drivers/i2c/busses/i2c-synquacer.c index 31ecb2c7e978..4eccbcd0fbfc 100644 --- a/drivers/i2c/busses/i2c-synquacer.c +++ b/drivers/i2c/busses/i2c-synquacer.c @@ -138,7 +138,6 @@ struct synquacer_i2c { int irq; struct device *dev; void __iomem *base; - struct clk *pclk; u32 pclkrate; u32 speed_khz; u32 timeout_ms; @@ -535,6 +534,7 @@ static const struct i2c_adapter synquacer_i2c_ops = { static int synquacer_i2c_probe(struct platform_device *pdev) { struct synquacer_i2c *i2c; + struct clk *pclk; u32 bus_speed; int ret; @@ -550,13 +550,12 @@ static int synquacer_i2c_probe(struct platform_device *pdev) device_property_read_u32(&pdev->dev, "socionext,pclk-rate", &i2c->pclkrate); - i2c->pclk = devm_clk_get_enabled(&pdev->dev, "pclk"); - if (IS_ERR(i2c->pclk)) - return dev_err_probe(&pdev->dev, PTR_ERR(i2c->pclk), + pclk = devm_clk_get_enabled(&pdev->dev, "pclk"); + if (IS_ERR(pclk)) + return dev_err_probe(&pdev->dev, PTR_ERR(pclk), "failed to get and enable clock\n"); - dev_dbg(&pdev->dev, "clock source %p\n", i2c->pclk); - i2c->pclkrate = clk_get_rate(i2c->pclk); + i2c->pclkrate = clk_get_rate(pclk); if (i2c->pclkrate < SYNQUACER_I2C_MIN_CLK_RATE || i2c->pclkrate > SYNQUACER_I2C_MAX_CLK_RATE) -- cgit v1.2.3 From 2360497238261f17d4a3f6cbc02d6dbd8951c23c Mon Sep 17 00:00:00 2001 From: Zhang Lixu Date: Thu, 23 May 2024 09:14:01 +0800 Subject: HID: intel-ish-hid: Fix build error for COMPILE_TEST kernel test robot reported build error due to a pointer type mismatch: .../ishtp/loader.c:172:8: error: incompatible pointer types passing '__le64 *' (aka 'unsigned long long *') to parameter of type 'dma_addr_t *' (aka 'unsigned int *') The issue arises because the driver, which is primarily intended for x86-64, is also built for i386 when COMPILE_TEST is enabled. Resolve type mismatch by using a temporary dma_addr_t variable to hold the DMA address. Populate this temporary variable in dma_alloc_coherent() function, and then convert and store the address in the fragment->fragment_tbl[i].ddr_adrs field in the correct format. Similarly, convert the ddr_adrs field back to dma_addr_t when freeing the DMA buffer with dma_free_coherent(). Fixes: 579a267e4617 ("HID: intel-ish-hid: Implement loading firmware from host feature") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202405201313.SAStVPrT-lkp@intel.com/ Signed-off-by: Zhang Lixu Signed-off-by: Jiri Kosina --- drivers/hid/intel-ish-hid/ishtp/loader.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/intel-ish-hid/ishtp/loader.c b/drivers/hid/intel-ish-hid/ishtp/loader.c index 993f8b390e57..2785b04a2f5a 100644 --- a/drivers/hid/intel-ish-hid/ishtp/loader.c +++ b/drivers/hid/intel-ish-hid/ishtp/loader.c @@ -138,12 +138,13 @@ static void release_dma_bufs(struct ishtp_device *dev, struct loader_xfer_dma_fragment *fragment, void **dma_bufs, u32 fragment_size) { + dma_addr_t dma_addr; int i; for (i = 0; i < FRAGMENT_MAX_NUM; i++) { if (dma_bufs[i]) { - dma_free_coherent(dev->devc, fragment_size, dma_bufs[i], - fragment->fragment_tbl[i].ddr_adrs); + dma_addr = le64_to_cpu(fragment->fragment_tbl[i].ddr_adrs); + dma_free_coherent(dev->devc, fragment_size, dma_bufs[i], dma_addr); dma_bufs[i] = NULL; } } @@ -164,15 +165,16 @@ static int prepare_dma_bufs(struct ishtp_device *dev, struct loader_xfer_dma_fragment *fragment, void **dma_bufs, u32 fragment_size) { + dma_addr_t dma_addr; u32 offset = 0; int i; for (i = 0; i < fragment->fragment_cnt && offset < ish_fw->size; i++) { - dma_bufs[i] = dma_alloc_coherent(dev->devc, fragment_size, - &fragment->fragment_tbl[i].ddr_adrs, GFP_KERNEL); + dma_bufs[i] = dma_alloc_coherent(dev->devc, fragment_size, &dma_addr, GFP_KERNEL); if (!dma_bufs[i]) return -ENOMEM; + fragment->fragment_tbl[i].ddr_adrs = cpu_to_le64(dma_addr); fragment->fragment_tbl[i].length = clamp(ish_fw->size - offset, 0, fragment_size); fragment->fragment_tbl[i].fw_off = offset; memcpy(dma_bufs[i], ish_fw->data + offset, fragment->fragment_tbl[i].length); -- cgit v1.2.3 From 0a3f9f7fc59feb8a91a2793b8b60977895c72365 Mon Sep 17 00:00:00 2001 From: Chen Ni Date: Wed, 15 May 2024 11:30:51 +0800 Subject: HID: nvidia-shield: Add missing check for input_ff_create_memless Add check for the return value of input_ff_create_memless() and return the error if it fails in order to catch the error. Fixes: 09308562d4af ("HID: nvidia-shield: Initial driver implementation with Thunderstrike support") Signed-off-by: Chen Ni Reviewed-by: Rahul Rameshbabu Signed-off-by: Jiri Kosina --- drivers/hid/hid-nvidia-shield.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hid/hid-nvidia-shield.c b/drivers/hid/hid-nvidia-shield.c index 58b15750dbb0..ff9078ad1961 100644 --- a/drivers/hid/hid-nvidia-shield.c +++ b/drivers/hid/hid-nvidia-shield.c @@ -283,7 +283,9 @@ static struct input_dev *shield_haptics_create( return haptics; input_set_capability(haptics, EV_FF, FF_RUMBLE); - input_ff_create_memless(haptics, NULL, play_effect); + ret = input_ff_create_memless(haptics, NULL, play_effect); + if (ret) + goto err; ret = input_register_device(haptics); if (ret) -- cgit v1.2.3 From ed281c6ab6eb8a914f06c74dfeaebde15b34a3f4 Mon Sep 17 00:00:00 2001 From: Carl Huang Date: Tue, 21 May 2024 11:08:10 +0300 Subject: wifi: ath11k: fix WCN6750 firmware crash caused by 17 num_vdevs WCN6750 firmware crashes because of num_vdevs changed from 4 to 17 in ath11k_init_wmi_config_qca6390() as the ab->hw_params.num_vdevs is 17. This is caused by commit f019f4dff2e4 ("wifi: ath11k: support 2 station interfaces") which assigns ab->hw_params.num_vdevs directly to config->num_vdevs in ath11k_init_wmi_config_qca6390(), therefore WCN6750 firmware crashes as it can't support such a big num_vdevs. Fix it by assign 3 to num_vdevs in hw_params for WCN6750 as 3 is sufficient too. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-01371-QCAMSLSWPLZ-1 Fixes: f019f4dff2e4 ("wifi: ath11k: support 2 station interfaces") Reported-by: Luca Weiss Tested-by: Luca Weiss Closes: https://lore.kernel.org/r/D15TIIDIIESY.D1EKKJLZINMA@fairphone.com/ Signed-off-by: Carl Huang Signed-off-by: Kalle Valo Link: https://msgid.link/20240520030757.2209395-1-quic_cjhuang@quicinc.com --- drivers/net/wireless/ath/ath11k/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c index 3cc817a3b4a4..b82e8fb28541 100644 --- a/drivers/net/wireless/ath/ath11k/core.c +++ b/drivers/net/wireless/ath/ath11k/core.c @@ -604,7 +604,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = { .coldboot_cal_ftm = true, .cbcal_restart_fw = false, .fw_mem_mode = 0, - .num_vdevs = 16 + 1, + .num_vdevs = 3, .num_peers = 512, .supports_suspend = false, .hal_desc_sz = sizeof(struct hal_rx_desc_qcn9074), -- cgit v1.2.3 From 6e16782d6b4a724f9c9dcd49471219643593b60c Mon Sep 17 00:00:00 2001 From: Baochen Qiang Date: Tue, 21 May 2024 11:08:11 +0300 Subject: wifi: ath11k: move power type check to ASSOC stage when connecting to 6 GHz AP With commit bc8a0fac8677 ("wifi: mac80211: don't set bss_conf in parsing") ath11k fails to connect to 6 GHz AP. This is because currently ath11k checks AP's power type in ath11k_mac_op_assign_vif_chanctx() which would be called in AUTH stage. However with above commit power type is not available until ASSOC stage. As a result power type check fails and therefore connection fails. Fix this by moving power type check to ASSOC stage, also move regulatory rules update there because it depends on power type. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Fixes: bc8a0fac8677 ("wifi: mac80211: don't set bss_conf in parsing") Signed-off-by: Baochen Qiang Acked-by: Jeff Johnson Signed-off-by: Kalle Valo Link: https://msgid.link/20240424064019.4847-1-quic_bqiang@quicinc.com --- drivers/net/wireless/ath/ath11k/mac.c | 38 +++++++++++++++++++++++------------ 1 file changed, 25 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c index 4f62e38ba48b..9b96dbb21d83 100644 --- a/drivers/net/wireless/ath/ath11k/mac.c +++ b/drivers/net/wireless/ath/ath11k/mac.c @@ -7988,8 +7988,6 @@ ath11k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw, struct ath11k_base *ab = ar->ab; struct ath11k_vif *arvif = ath11k_vif_to_arvif(vif); int ret; - struct cur_regulatory_info *reg_info; - enum ieee80211_ap_reg_power power_type; mutex_lock(&ar->conf_mutex); @@ -8000,17 +7998,6 @@ ath11k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw, if (ath11k_wmi_supports_6ghz_cc_ext(ar) && ctx->def.chan->band == NL80211_BAND_6GHZ && arvif->vdev_type == WMI_VDEV_TYPE_STA) { - reg_info = &ab->reg_info_store[ar->pdev_idx]; - power_type = vif->bss_conf.power_type; - - ath11k_dbg(ab, ATH11K_DBG_MAC, "chanctx power type %d\n", power_type); - - if (power_type == IEEE80211_REG_UNSET_AP) { - ret = -EINVAL; - goto out; - } - - ath11k_reg_handle_chan_list(ab, reg_info, power_type); arvif->chanctx = *ctx; ath11k_mac_parse_tx_pwr_env(ar, vif, ctx); } @@ -9626,6 +9613,8 @@ static int ath11k_mac_op_sta_state(struct ieee80211_hw *hw, struct ath11k *ar = hw->priv; struct ath11k_vif *arvif = ath11k_vif_to_arvif(vif); struct ath11k_sta *arsta = ath11k_sta_to_arsta(sta); + enum ieee80211_ap_reg_power power_type; + struct cur_regulatory_info *reg_info; struct ath11k_peer *peer; int ret = 0; @@ -9705,6 +9694,29 @@ static int ath11k_mac_op_sta_state(struct ieee80211_hw *hw, ath11k_warn(ar->ab, "Unable to authorize peer %pM vdev %d: %d\n", sta->addr, arvif->vdev_id, ret); } + + if (!ret && + ath11k_wmi_supports_6ghz_cc_ext(ar) && + arvif->vdev_type == WMI_VDEV_TYPE_STA && + arvif->chanctx.def.chan && + arvif->chanctx.def.chan->band == NL80211_BAND_6GHZ) { + reg_info = &ar->ab->reg_info_store[ar->pdev_idx]; + power_type = vif->bss_conf.power_type; + + if (power_type == IEEE80211_REG_UNSET_AP) { + ath11k_warn(ar->ab, "invalid power type %d\n", + power_type); + ret = -EINVAL; + } else { + ret = ath11k_reg_handle_chan_list(ar->ab, + reg_info, + power_type); + if (ret) + ath11k_warn(ar->ab, + "failed to handle chan list with power type %d\n", + power_type); + } + } } else if (old_state == IEEE80211_STA_AUTHORIZED && new_state == IEEE80211_STA_ASSOC) { spin_lock_bh(&ar->ab->base_lock); -- cgit v1.2.3 From d09c05aa35909adb7d29f92f0cd79fdcd1338ef0 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Mon, 20 May 2024 22:30:40 -0400 Subject: scsi: core: Handle devices which return an unusually large VPD page count Peter Schneider reported that a system would no longer boot after updating to 6.8.4. Peter bisected the issue and identified commit b5fc07a5fb56 ("scsi: core: Consult supported VPD page list prior to fetching page") as being the culprit. Turns out the enclosure device in Peter's system reports a byteswapped page length for VPD page 0. It reports "02 00" as page length instead of "00 02". This causes us to attempt to access 516 bytes (page length + header) of information despite only 2 pages being present. Limit the page search scope to the size of our VPD buffer to guard against devices returning a larger page count than requested. Link: https://lore.kernel.org/r/20240521023040.2703884-1-martin.petersen@oracle.com Fixes: b5fc07a5fb56 ("scsi: core: Consult supported VPD page list prior to fetching page") Cc: stable@vger.kernel.org Reported-by: Peter Schneider Closes: https://lore.kernel.org/all/eec6ebbf-061b-4a7b-96dc-ea748aa4d035@googlemail.com/ Tested-by: Peter Schneider Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 3e0c0381277a..f0464db3f9de 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -350,6 +350,13 @@ static int scsi_get_vpd_size(struct scsi_device *sdev, u8 page) if (result < SCSI_VPD_HEADER_SIZE) return 0; + if (result > sizeof(vpd)) { + dev_warn_once(&sdev->sdev_gendev, + "%s: long VPD page 0 length: %d bytes\n", + __func__, result); + result = sizeof(vpd); + } + result -= SCSI_VPD_HEADER_SIZE; if (!memchr(&vpd[SCSI_VPD_HEADER_SIZE], page, result)) return 0; -- cgit v1.2.3 From 8a01ef749b0a632f0e1f4ead0f08b3310d99fcb1 Mon Sep 17 00:00:00 2001 From: David Lechner Date: Fri, 3 May 2024 14:45:05 -0500 Subject: iio: adc: ad9467: fix scan type sign According to the IIO documentation, the sign in the scan type should be lower case. The ad9467 driver was incorrectly using upper case. Fix by changing to lower case. Fixes: 4606d0f4b05f ("iio: adc: ad9467: add support for AD9434 high-speed ADC") Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC") Signed-off-by: David Lechner Link: https://lore.kernel.org/r/20240503-ad9467-fix-scan-type-sign-v1-1-c7a1a066ebb9@baylibre.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad9467.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c index e85b763b9ffc..8f5b9c3f6e3d 100644 --- a/drivers/iio/adc/ad9467.c +++ b/drivers/iio/adc/ad9467.c @@ -243,11 +243,11 @@ static void __ad9467_get_scale(struct ad9467_state *st, int index, } static const struct iio_chan_spec ad9434_channels[] = { - AD9467_CHAN(0, 0, 12, 'S'), + AD9467_CHAN(0, 0, 12, 's'), }; static const struct iio_chan_spec ad9467_channels[] = { - AD9467_CHAN(0, 0, 16, 'S'), + AD9467_CHAN(0, 0, 16, 's'), }; static const struct ad9467_chip_info ad9467_chip_tbl = { -- cgit v1.2.3 From 0f0f6306617cb4b6231fc9d4ec68ab9a56dba7c0 Mon Sep 17 00:00:00 2001 From: Adam Rizkalla Date: Thu, 25 Apr 2024 01:22:49 -0500 Subject: iio: pressure: bmp280: Fix BMP580 temperature reading Fix overflow issue when storing BMP580 temperature reading and properly preserve sign of 24-bit data. Signed-off-by: Adam Rizkalla Tested-By: Vasileios Amoiridis Acked-by: Angel Iglesias Link: https://lore.kernel.org/r/Zin2udkXRD0+GrML@adam-asahi.lan Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/bmp280-core.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index 09f53d987c7d..221fa2c552ae 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -1394,12 +1394,12 @@ static int bmp580_read_temp(struct bmp280_data *data, int *val, int *val2) /* * Temperature is returned in Celsius degrees in fractional - * form down 2^16. We rescale by x1000 to return milli Celsius - * to respect IIO ABI. + * form down 2^16. We rescale by x1000 to return millidegrees + * Celsius to respect IIO ABI. */ - *val = raw_temp * 1000; - *val2 = 16; - return IIO_VAL_FRACTIONAL_LOG2; + raw_temp = sign_extend32(raw_temp, 23); + *val = ((s64)raw_temp * 1000) / (1 << 16); + return IIO_VAL_INT; } static int bmp580_read_press(struct bmp280_data *data, int *val, int *val2) -- cgit v1.2.3 From 279428df888319bf68f2686934897301a250bb84 Mon Sep 17 00:00:00 2001 From: Marc Ferland Date: Wed, 1 May 2024 11:05:54 -0400 Subject: iio: dac: ad5592r: fix temperature channel scaling value The scale value for the temperature channel is (assuming Vref=2.5 and the datasheet): 376.7897513 When calculating both val and val2 for the temperature scale we use (3767897513/25) and multiply it by Vref (here I assume 2500mV) to obtain: 2500 * (3767897513/25) ==> 376789751300 Finally we divide with remainder by 10^9 to get: val = 376 val2 = 789751300 However, we return IIO_VAL_INT_PLUS_MICRO (should have been NANO) as the scale type. So when converting the raw temperature value to the 'processed' temperature value we will get (assuming raw=810, offset=-753): processed = (raw + offset) * scale_val = (810 + -753) * 376 = 21432 processed += div((raw + offset) * scale_val2, 10^6) += div((810 + -753) * 789751300, 10^6) += 45015 ==> 66447 ==> 66.4 Celcius instead of the expected 21.5 Celsius. Fix this issue by changing IIO_VAL_INT_PLUS_MICRO to IIO_VAL_INT_PLUS_NANO. Fixes: 56ca9db862bf ("iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs") Signed-off-by: Marc Ferland Link: https://lore.kernel.org/r/20240501150554.1871390-1-marc.ferland@sonatest.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/dac/ad5592r-base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/dac/ad5592r-base.c b/drivers/iio/dac/ad5592r-base.c index 076bc9ecfb49..4763402dbcd6 100644 --- a/drivers/iio/dac/ad5592r-base.c +++ b/drivers/iio/dac/ad5592r-base.c @@ -415,7 +415,7 @@ static int ad5592r_read_raw(struct iio_dev *iio_dev, s64 tmp = *val * (3767897513LL / 25LL); *val = div_s64_rem(tmp, 1000000000LL, val2); - return IIO_VAL_INT_PLUS_MICRO; + return IIO_VAL_INT_PLUS_NANO; } mutex_lock(&st->lock); -- cgit v1.2.3 From bedb2ccb566de5ca0c336ca3fd3588cea6d50414 Mon Sep 17 00:00:00 2001 From: Vasileios Amoiridis Date: Wed, 8 May 2024 17:54:07 +0200 Subject: iio: imu: bmi323: Fix trigger notification in case of error In case of error in the bmi323_trigger_handler() function, the function exits without calling the iio_trigger_notify_done() which is responsible for informing the attached trigger that the process is done and in case there is a .reenable(), to call it. Fixes: 8a636db3aa57 ("iio: imu: Add driver for BMI323 IMU") Signed-off-by: Vasileios Amoiridis Link: https://lore.kernel.org/r/20240508155407.139805-1-vassilisamir@gmail.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/imu/bmi323/bmi323_core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/imu/bmi323/bmi323_core.c b/drivers/iio/imu/bmi323/bmi323_core.c index 5d42ab9b176a..67d74a1a1b26 100644 --- a/drivers/iio/imu/bmi323/bmi323_core.c +++ b/drivers/iio/imu/bmi323/bmi323_core.c @@ -1391,7 +1391,7 @@ static irqreturn_t bmi323_trigger_handler(int irq, void *p) &data->buffer.channels, ARRAY_SIZE(data->buffer.channels)); if (ret) - return IRQ_NONE; + goto out; } else { for_each_set_bit(bit, indio_dev->active_scan_mask, BMI323_CHAN_MAX) { @@ -1400,13 +1400,14 @@ static irqreturn_t bmi323_trigger_handler(int irq, void *p) &data->buffer.channels[index++], BMI323_BYTES_PER_SAMPLE); if (ret) - return IRQ_NONE; + goto out; } } iio_push_to_buffers_with_timestamp(indio_dev, &data->buffer, iio_get_time_ns(indio_dev)); +out: iio_trigger_notify_done(indio_dev->trig); return IRQ_HANDLED; -- cgit v1.2.3 From a23c14b062d8800a2192077d83273bbfe6c7552d Mon Sep 17 00:00:00 2001 From: Harshit Mogalapalli Date: Mon, 13 May 2024 13:34:27 -0700 Subject: iio: temperature: mlx90635: Fix ERR_PTR dereference in mlx90635_probe() When devm_regmap_init_i2c() fails, regmap_ee could be error pointer, instead of checking for IS_ERR(regmap_ee), regmap is checked which looks like a copy paste error. Fixes: a1d1ba5e1c28 ("iio: temperature: mlx90635 MLX90635 IR Temperature sensor") Reviewed-by: Crt Mori Signed-off-by: Harshit Mogalapalli Link: https://lore.kernel.org/r/20240513203427.3208696-1-harshit.m.mogalapalli@oracle.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/temperature/mlx90635.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/temperature/mlx90635.c b/drivers/iio/temperature/mlx90635.c index 1f5c962c1818..f7f88498ba0e 100644 --- a/drivers/iio/temperature/mlx90635.c +++ b/drivers/iio/temperature/mlx90635.c @@ -947,9 +947,9 @@ static int mlx90635_probe(struct i2c_client *client) "failed to allocate regmap\n"); regmap_ee = devm_regmap_init_i2c(client, &mlx90635_regmap_ee); - if (IS_ERR(regmap)) - return dev_err_probe(&client->dev, PTR_ERR(regmap), - "failed to allocate regmap\n"); + if (IS_ERR(regmap_ee)) + return dev_err_probe(&client->dev, PTR_ERR(regmap_ee), + "failed to allocate EEPROM regmap\n"); mlx90635 = iio_priv(indio_dev); i2c_set_clientdata(client, indio_dev); -- cgit v1.2.3 From ab6f0ab178137170a6b40f8f3d7a3806708a202c Mon Sep 17 00:00:00 2001 From: Dumitru Ceclan Date: Tue, 21 May 2024 11:45:39 +0300 Subject: iio: adc: ad7173: fix buffers enablement for ad7176-2 AD7176-2 does not feature input buffers and marks corespondent register bits as read only. Enable buffers only on supported models. Fixes: 76a1e6a42802 ("iio: adc: ad7173: add AD7173 driver") Reviewed-by: David Lechner Signed-off-by: Dumitru Ceclan Link: https://lore.kernel.org/r/20240521-ad7173-fixes-v1-1-8161cc7f3ad1@analog.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7173.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/ad7173.c b/drivers/iio/adc/ad7173.c index a7826bba0852..91acedaddb57 100644 --- a/drivers/iio/adc/ad7173.c +++ b/drivers/iio/adc/ad7173.c @@ -145,6 +145,7 @@ struct ad7173_device_info { unsigned int id; char *name; bool has_temp; + bool has_input_buf; bool has_int_ref; bool has_ref2; u8 num_gpios; @@ -212,6 +213,7 @@ static const struct ad7173_device_info ad7173_device_info[] = { .num_configs = 4, .num_gpios = 2, .has_temp = true, + .has_input_buf = true, .has_int_ref = true, .clock = 2 * HZ_PER_MHZ, .sinc5_data_rates = ad7173_sinc5_data_rates, @@ -224,6 +226,7 @@ static const struct ad7173_device_info ad7173_device_info[] = { .num_configs = 8, .num_gpios = 4, .has_temp = false, + .has_input_buf = true, .has_ref2 = true, .clock = 2 * HZ_PER_MHZ, .sinc5_data_rates = ad7173_sinc5_data_rates, @@ -237,6 +240,7 @@ static const struct ad7173_device_info ad7173_device_info[] = { .num_configs = 8, .num_gpios = 4, .has_temp = true, + .has_input_buf = true, .has_int_ref = true, .has_ref2 = true, .clock = 2 * HZ_PER_MHZ, @@ -251,6 +255,7 @@ static const struct ad7173_device_info ad7173_device_info[] = { .num_configs = 4, .num_gpios = 2, .has_temp = true, + .has_input_buf = true, .has_int_ref = true, .clock = 16 * HZ_PER_MHZ, .sinc5_data_rates = ad7175_sinc5_data_rates, @@ -263,6 +268,7 @@ static const struct ad7173_device_info ad7173_device_info[] = { .num_configs = 8, .num_gpios = 4, .has_temp = true, + .has_input_buf = true, .has_int_ref = true, .has_ref2 = true, .clock = 16 * HZ_PER_MHZ, @@ -277,6 +283,7 @@ static const struct ad7173_device_info ad7173_device_info[] = { .num_configs = 4, .num_gpios = 2, .has_temp = false, + .has_input_buf = false, .has_int_ref = true, .clock = 16 * HZ_PER_MHZ, .sinc5_data_rates = ad7175_sinc5_data_rates, @@ -289,6 +296,7 @@ static const struct ad7173_device_info ad7173_device_info[] = { .num_configs = 4, .num_gpios = 2, .has_temp = true, + .has_input_buf = true, .has_int_ref = true, .clock = 16 * HZ_PER_MHZ, .odr_start_value = AD7177_ODR_START_VALUE, @@ -932,7 +940,7 @@ static int ad7173_fw_parse_channel_config(struct iio_dev *indio_dev) AD7173_CH_ADDRESS(chan_arr[chan_index].channel, chan_arr[chan_index].channel2); chan_st_priv->cfg.bipolar = false; - chan_st_priv->cfg.input_buf = true; + chan_st_priv->cfg.input_buf = st->info->has_input_buf; chan_st_priv->cfg.ref_sel = AD7173_SETUP_REF_SEL_INT_REF; st->adc_mode |= AD7173_ADC_MODE_REF_EN; @@ -989,7 +997,7 @@ static int ad7173_fw_parse_channel_config(struct iio_dev *indio_dev) chan_st_priv->ain = AD7173_CH_ADDRESS(ain[0], ain[1]); chan_st_priv->chan_reg = chan_index; - chan_st_priv->cfg.input_buf = true; + chan_st_priv->cfg.input_buf = st->info->has_input_buf; chan_st_priv->cfg.odr = 0; chan_st_priv->cfg.bipolar = fwnode_property_read_bool(child, "bipolar"); -- cgit v1.2.3 From 3450ee7e800a8dc83290780c1b6ef66898e709d3 Mon Sep 17 00:00:00 2001 From: Dumitru Ceclan Date: Tue, 21 May 2024 11:45:40 +0300 Subject: iio: adc: ad7173: Add ad7173_device_info names Add missing names from the device info struct for 3 models to ensure consistency with the rest of the models. Fixes: 76a1e6a42802 ("iio: adc: ad7173: add AD7173 driver") Signed-off-by: Dumitru Ceclan Link: https://lore.kernel.org/r/20240521-ad7173-fixes-v1-2-8161cc7f3ad1@analog.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7173.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/iio/adc/ad7173.c b/drivers/iio/adc/ad7173.c index 91acedaddb57..4649af5f9d76 100644 --- a/drivers/iio/adc/ad7173.c +++ b/drivers/iio/adc/ad7173.c @@ -220,6 +220,7 @@ static const struct ad7173_device_info ad7173_device_info[] = { .num_sinc5_data_rates = ARRAY_SIZE(ad7173_sinc5_data_rates), }, [ID_AD7172_4] = { + .name = "ad7172-4", .id = AD7172_4_ID, .num_inputs = 9, .num_channels = 8, @@ -262,6 +263,7 @@ static const struct ad7173_device_info ad7173_device_info[] = { .num_sinc5_data_rates = ARRAY_SIZE(ad7175_sinc5_data_rates), }, [ID_AD7175_8] = { + .name = "ad7175-8", .id = AD7175_8_ID, .num_inputs = 17, .num_channels = 16, @@ -290,6 +292,7 @@ static const struct ad7173_device_info ad7173_device_info[] = { .num_sinc5_data_rates = ARRAY_SIZE(ad7175_sinc5_data_rates), }, [ID_AD7177_2] = { + .name = "ad7177-2", .id = AD7177_ID, .num_inputs = 5, .num_channels = 4, -- cgit v1.2.3 From f00dd8953094091a8e9c8cc00661d01c33b93615 Mon Sep 17 00:00:00 2001 From: Dumitru Ceclan Date: Tue, 21 May 2024 11:45:41 +0300 Subject: iio: adc: ad7173: Remove index from temp channel Temperature channel is unique per device, index is not needed. This is breaking userspace: Include fixes tag to be released within the same rc cycle. Fixes: 76a1e6a42802 ("iio: adc: ad7173: add AD7173 driver") Signed-off-by: Dumitru Ceclan Link: https://lore.kernel.org/r/20240521-ad7173-fixes-v1-3-8161cc7f3ad1@analog.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7173.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/adc/ad7173.c b/drivers/iio/adc/ad7173.c index 4649af5f9d76..048127bf979a 100644 --- a/drivers/iio/adc/ad7173.c +++ b/drivers/iio/adc/ad7173.c @@ -815,7 +815,6 @@ static const struct iio_chan_spec ad7173_channel_template = { static const struct iio_chan_spec ad7173_temp_iio_channel_template = { .type = IIO_TEMP, - .indexed = 1, .channel = AD7173_AIN_TEMP_POS, .channel2 = AD7173_AIN_TEMP_NEG, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | -- cgit v1.2.3 From 95444b9eeb8c5c0330563931d70c61ca3b101548 Mon Sep 17 00:00:00 2001 From: Jean-Baptiste Maneyrol Date: Fri, 24 May 2024 12:48:51 +0000 Subject: iio: invensense: fix odr switching to same value ODR switching happens in 2 steps, update to store the new value and then apply when the ODR change flag is received in the data. When switching to the same ODR value, the ODR change flag is never happening, and frequency switching is blocked waiting for the never coming apply. Fix the issue by preventing update to happen when switching to same ODR value. Fixes: 0ecc363ccea7 ("iio: make invensense timestamp module generic") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol Link: https://lore.kernel.org/r/20240524124851.567485-1-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron --- drivers/iio/common/inv_sensors/inv_sensors_timestamp.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/common/inv_sensors/inv_sensors_timestamp.c b/drivers/iio/common/inv_sensors/inv_sensors_timestamp.c index fa205f17bd90..f44458c380d9 100644 --- a/drivers/iio/common/inv_sensors/inv_sensors_timestamp.c +++ b/drivers/iio/common/inv_sensors/inv_sensors_timestamp.c @@ -60,11 +60,15 @@ EXPORT_SYMBOL_NS_GPL(inv_sensors_timestamp_init, IIO_INV_SENSORS_TIMESTAMP); int inv_sensors_timestamp_update_odr(struct inv_sensors_timestamp *ts, uint32_t period, bool fifo) { + uint32_t mult; + /* when FIFO is on, prevent odr change if one is already pending */ if (fifo && ts->new_mult != 0) return -EAGAIN; - ts->new_mult = period / ts->chip.clock_period; + mult = period / ts->chip.clock_period; + if (mult != ts->mult) + ts->new_mult = mult; return 0; } -- cgit v1.2.3 From 825fc49497957310e421454fe3fb8b8d8d8e2dd2 Mon Sep 17 00:00:00 2001 From: Martin Tůma Date: Tue, 21 May 2024 18:22:54 +0200 Subject: media: mgb4: Fix double debugfs remove MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes an error where debugfs_remove_recursive() is called first on a parent directory and then again on a child which causes a kernel panic. Signed-off-by: Martin Tůma Signed-off-by: Hans Verkuil Fixes: 0ab13674a9bd ("media: pci: mgb4: Added Digiteq Automotive MGB4 driver") Cc: [hverkuil: added Fixes/Cc tags] --- drivers/media/pci/mgb4/mgb4_core.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/pci/mgb4/mgb4_core.c b/drivers/media/pci/mgb4/mgb4_core.c index 60498a5abebf..ab4f07e2e560 100644 --- a/drivers/media/pci/mgb4/mgb4_core.c +++ b/drivers/media/pci/mgb4/mgb4_core.c @@ -642,9 +642,6 @@ static void mgb4_remove(struct pci_dev *pdev) struct mgb4_dev *mgbdev = pci_get_drvdata(pdev); int i; -#ifdef CONFIG_DEBUG_FS - debugfs_remove_recursive(mgbdev->debugfs); -#endif #if IS_REACHABLE(CONFIG_HWMON) hwmon_device_unregister(mgbdev->hwmon_dev); #endif @@ -659,6 +656,10 @@ static void mgb4_remove(struct pci_dev *pdev) if (mgbdev->vin[i]) mgb4_vin_free(mgbdev->vin[i]); +#ifdef CONFIG_DEBUG_FS + debugfs_remove_recursive(mgbdev->debugfs); +#endif + device_remove_groups(&mgbdev->pdev->dev, mgb4_pci_groups); free_spi(mgbdev); free_i2c(mgbdev); -- cgit v1.2.3 From 7ff6c798eca05e4a9dcb80163cb454d7787a4bc3 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 21 May 2024 15:46:32 -0700 Subject: ACPI: APEI: EINJ: Fix einj_dev release leak The platform driver conversion of EINJ mistakenly used platform_device_del() to unwind platform_device_register_full() at module exit. This leads to a small leak of one 'struct platform_device' instance per module load/unload cycle. Switch to platform_device_unregister() which performs both device_del() and final put_device(). Fixes: 5621fafaac00 ("EINJ: Migrate to a platform driver") Cc: 6.9+ # 6.9+ Signed-off-by: Dan Williams Reviewed-by: Ben Cheatham Signed-off-by: Rafael J. Wysocki --- drivers/acpi/apei/einj-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/apei/einj-core.c b/drivers/acpi/apei/einj-core.c index 9515bcfe5e97..73903a497d73 100644 --- a/drivers/acpi/apei/einj-core.c +++ b/drivers/acpi/apei/einj-core.c @@ -909,7 +909,7 @@ static void __exit einj_exit(void) if (einj_initialized) platform_driver_unregister(&einj_driver); - platform_device_del(einj_dev); + platform_device_unregister(einj_dev); } module_init(einj_init); -- cgit v1.2.3 From f6f172dc6a6d7775b2df6adfd1350700e9a847ec Mon Sep 17 00:00:00 2001 From: Armin Wolf Date: Wed, 22 May 2024 23:36:48 +0200 Subject: ACPI: EC: Abort address space access upon error When a multi-byte address space access is requested, acpi_ec_read()/ acpi_ec_write() is being called multiple times. Abort such operations if a single call to acpi_ec_read() / acpi_ec_write() fails, as the data read from / written to the EC might be incomplete. Signed-off-by: Armin Wolf Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ec.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index e7793ee9e649..a68dce2147a4 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -1333,10 +1333,13 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address, if (ec->busy_polling || bits > 8) acpi_ec_burst_enable(ec); - for (i = 0; i < bytes; ++i, ++address, ++value) + for (i = 0; i < bytes; ++i, ++address, ++value) { result = (function == ACPI_READ) ? acpi_ec_read(ec, address, value) : acpi_ec_write(ec, address, *value); + if (result < 0) + break; + } if (ec->busy_polling || bits > 8) acpi_ec_burst_disable(ec); -- cgit v1.2.3 From c4bd7f1d78340e63de4d073fd3dbe5391e2996e5 Mon Sep 17 00:00:00 2001 From: Armin Wolf Date: Wed, 22 May 2024 23:36:49 +0200 Subject: ACPI: EC: Avoid returning AE_OK on errors in address space handler If an error code other than EINVAL, ENODEV or ETIME is returned by acpi_ec_read() / acpi_ec_write(), then AE_OK is incorrectly returned by acpi_ec_space_handler(). Fix this by only returning AE_OK on success, and return AE_ERROR otherwise. Signed-off-by: Armin Wolf [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ec.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index a68dce2147a4..68dd17f96f63 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -1351,8 +1351,10 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address, return AE_NOT_FOUND; case -ETIME: return AE_TIME; - default: + case 0: return AE_OK; + default: + return AE_ERROR; } } -- cgit v1.2.3 From 9e69acc1de306b5243ca2ef8a54242e56d01b8e5 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 23 May 2024 17:57:21 +0200 Subject: thermal/debugfs: Print initial trip temperature and hysteresis in tze_seq_show() The temperature and hysteresis of a trip point may change during a mitigation episode it is involved in (it may even become invalid altogether), so in order to avoid possible confusion related to that, store the temperature and hysteresis of trip points at the time they are crossed on the way up and print those values instead of their current temperature and hysteresis. Fixes: 7ef01f228c9f ("thermal/debugfs: Add thermal debugfs information for mitigation episodes") Signed-off-by: Rafael J. Wysocki --- drivers/thermal/thermal_debugfs.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/thermal_debugfs.c b/drivers/thermal/thermal_debugfs.c index 91f9c21235a8..e0e4eb6fad39 100644 --- a/drivers/thermal/thermal_debugfs.c +++ b/drivers/thermal/thermal_debugfs.c @@ -91,6 +91,8 @@ struct cdev_record { * * @timestamp: the trip crossing timestamp * @duration: total time when the zone temperature was above the trip point + * @trip_temp: trip temperature at mitigation start + * @trip_hyst: trip hysteresis at mitigation start * @count: the number of times the zone temperature was above the trip point * @max: maximum recorded temperature above the trip point * @min: minimum recorded temperature above the trip point @@ -99,6 +101,8 @@ struct cdev_record { struct trip_stats { ktime_t timestamp; ktime_t duration; + int trip_temp; + int trip_hyst; int count; int max; int min; @@ -574,6 +578,7 @@ void thermal_debug_tz_trip_up(struct thermal_zone_device *tz, struct thermal_debugfs *thermal_dbg = tz->debugfs; int trip_id = thermal_zone_trip_id(tz, trip); ktime_t now = ktime_get(); + struct trip_stats *trip_stats; if (!thermal_dbg) return; @@ -639,7 +644,10 @@ void thermal_debug_tz_trip_up(struct thermal_zone_device *tz, tz_dbg->trips_crossed[tz_dbg->nr_trips++] = trip_id; tze = list_first_entry(&tz_dbg->tz_episodes, struct tz_episode, node); - tze->trip_stats[trip_id].timestamp = now; + trip_stats = &tze->trip_stats[trip_id]; + trip_stats->trip_temp = trip->temperature; + trip_stats->trip_hyst = trip->hysteresis; + trip_stats->timestamp = now; unlock: mutex_unlock(&thermal_dbg->lock); @@ -836,8 +844,8 @@ static int tze_seq_show(struct seq_file *s, void *v) seq_printf(s, "| %*d | %*s | %*d | %*d | %c%*lld | %*d | %*d | %*d |\n", 4 , trip_id, 8, type, - 9, trip->temperature, - 9, trip->hysteresis, + 9, trip_stats->trip_temp, + 9, trip_stats->trip_hyst, c, 10, duration_ms, 9, trip_stats->avg, 9, trip_stats->min, -- cgit v1.2.3 From 5a599e10e53d1914adf0032c730bc0f604a5d947 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 23 May 2024 17:58:42 +0200 Subject: thermal/debugfs: Allow tze_seq_show() to print statistics for invalid trips Commit a6258fde8de3 ("thermal/debugfs: Make tze_seq_show() skip invalid trips and trips with no stats") modified tze_seq_show() to skip invalid trips, but it overlooked the fact that a trip may become invalid during a mitigation eposide involving it, in which case its statistics should still be reported. For this reason, remove the invalid trip temperature check from the main loop in tze_seq_show(). The trips that have never been valid will still be skipped after this change because there are no statistics to report for them. Fixes: a6258fde8de3 ("thermal/debugfs: Make tze_seq_show() skip invalid trips and trips with no stats") Signed-off-by: Rafael J. Wysocki --- drivers/thermal/thermal_debugfs.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/thermal_debugfs.c b/drivers/thermal/thermal_debugfs.c index e0e4eb6fad39..942447229157 100644 --- a/drivers/thermal/thermal_debugfs.c +++ b/drivers/thermal/thermal_debugfs.c @@ -802,10 +802,6 @@ static int tze_seq_show(struct seq_file *s, void *v) const struct thermal_trip *trip = &td->trip; struct trip_stats *trip_stats; - /* Skip invalid trips. */ - if (trip->temperature == THERMAL_TEMP_INVALID) - continue; - /* * There is no possible mitigation happening at the * critical trip point, so the stats will be always -- cgit v1.2.3 From cb573eec609c44f44b27c2fa07afd926eddc9f89 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 23 May 2024 18:00:14 +0200 Subject: thermal: core: Introduce thermal_trip_crossed() Add a helper function called thermal_trip_crossed() to be invoked by __thermal_zone_device_update() in order to notify user space, the thermal debug code and the zone governor about trip crossing. Subsequently, this will also be used in the case when a trip point becomes invalid after being crossed on the way up. No intentional functional impact. Signed-off-by: Rafael J. Wysocki --- drivers/thermal/thermal_core.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 54cce4e523bc..c119ef920793 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -467,6 +467,21 @@ static void thermal_governor_trip_crossed(struct thermal_governor *governor, governor->trip_crossed(tz, trip, crossed_up); } +static void thermal_trip_crossed(struct thermal_zone_device *tz, + const struct thermal_trip *trip, + struct thermal_governor *governor, + bool crossed_up) +{ + if (crossed_up) { + thermal_notify_tz_trip_up(tz, trip); + thermal_debug_tz_trip_up(tz, trip); + } else { + thermal_notify_tz_trip_down(tz, trip); + thermal_debug_tz_trip_down(tz, trip); + } + thermal_governor_trip_crossed(governor, tz, trip, crossed_up); +} + static int thermal_trip_notify_cmp(void *ascending, const struct list_head *a, const struct list_head *b) { @@ -506,18 +521,12 @@ void __thermal_zone_device_update(struct thermal_zone_device *tz, handle_thermal_trip(tz, td, &way_up_list, &way_down_list); list_sort(&way_up_list, &way_up_list, thermal_trip_notify_cmp); - list_for_each_entry(td, &way_up_list, notify_list_node) { - thermal_notify_tz_trip_up(tz, &td->trip); - thermal_debug_tz_trip_up(tz, &td->trip); - thermal_governor_trip_crossed(governor, tz, &td->trip, true); - } + list_for_each_entry(td, &way_up_list, notify_list_node) + thermal_trip_crossed(tz, &td->trip, governor, true); list_sort(NULL, &way_down_list, thermal_trip_notify_cmp); - list_for_each_entry(td, &way_down_list, notify_list_node) { - thermal_notify_tz_trip_down(tz, &td->trip); - thermal_debug_tz_trip_down(tz, &td->trip); - thermal_governor_trip_crossed(governor, tz, &td->trip, false); - } + list_for_each_entry(td, &way_down_list, notify_list_node) + thermal_trip_crossed(tz, &td->trip, governor, false); if (governor->manage) governor->manage(tz); -- cgit v1.2.3 From ae2170d6ea96e652c7fb5689f1980986bf48b7b8 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 23 May 2024 18:05:03 +0200 Subject: thermal: trip: Trigger trip down notifications when trips involved in mitigation become invalid When a trip point becomes invalid after being crossed on the way up, it is involved in a mitigation episode that needs to be adjusted to compensate for the trip going away. For this reason, introduce thermal_zone_trip_down() as a wrapper around thermal_trip_crossed() and make thermal_zone_set_trip_temp() call it if the new temperature of the trip at hand is equal to THERMAL_TEMP_INVALID and it has been crossed on the way up to trigger all of the necessary adjustments in user space, the thermal debug code and the zone governor. Fixes: 8c69a777e480 ("thermal: core: Fix the handling of invalid trip points") Signed-off-by: Rafael J. Wysocki --- drivers/thermal/thermal_core.c | 6 ++++++ drivers/thermal/thermal_core.h | 2 ++ drivers/thermal/thermal_trip.c | 20 ++++++++++++-------- 3 files changed, 20 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index c119ef920793..30567b499455 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -602,6 +602,12 @@ void thermal_zone_device_update(struct thermal_zone_device *tz, } EXPORT_SYMBOL_GPL(thermal_zone_device_update); +void thermal_zone_trip_down(struct thermal_zone_device *tz, + const struct thermal_trip *trip) +{ + thermal_trip_crossed(tz, trip, thermal_get_tz_governor(tz), false); +} + int for_each_thermal_governor(int (*cb)(struct thermal_governor *, void *), void *data) { diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h index d9785e5bbb08..20e7b45673d6 100644 --- a/drivers/thermal/thermal_core.h +++ b/drivers/thermal/thermal_core.h @@ -246,6 +246,8 @@ int thermal_zone_trip_id(const struct thermal_zone_device *tz, void thermal_zone_trip_updated(struct thermal_zone_device *tz, const struct thermal_trip *trip); int __thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp); +void thermal_zone_trip_down(struct thermal_zone_device *tz, + const struct thermal_trip *trip); /* sysfs I/F */ int thermal_zone_create_device_groups(struct thermal_zone_device *tz); diff --git a/drivers/thermal/thermal_trip.c b/drivers/thermal/thermal_trip.c index d6a6acc78ddb..49e63db68517 100644 --- a/drivers/thermal/thermal_trip.c +++ b/drivers/thermal/thermal_trip.c @@ -152,17 +152,23 @@ void thermal_zone_set_trip_temp(struct thermal_zone_device *tz, if (trip->temperature == temp) return; + trip->temperature = temp; + thermal_notify_tz_trip_change(tz, trip); + if (temp == THERMAL_TEMP_INVALID) { struct thermal_trip_desc *td = trip_to_trip_desc(trip); - if (trip->type == THERMAL_TRIP_PASSIVE && - tz->temperature >= td->threshold) { + if (tz->temperature >= td->threshold) { /* - * The trip has been crossed, so the thermal zone's - * passive count needs to be adjusted. + * The trip has been crossed on the way up, so some + * adjustments are needed to compensate for the lack + * of it going forward. */ - tz->passive--; - WARN_ON_ONCE(tz->passive < 0); + if (trip->type == THERMAL_TRIP_PASSIVE) { + tz->passive--; + WARN_ON_ONCE(tz->passive < 0); + } + thermal_zone_trip_down(tz, trip); } /* * Invalidate the threshold to avoid triggering a spurious @@ -170,7 +176,5 @@ void thermal_zone_set_trip_temp(struct thermal_zone_device *tz, */ td->threshold = INT_MAX; } - trip->temperature = temp; - thermal_notify_tz_trip_change(tz, trip); } EXPORT_SYMBOL_GPL(thermal_zone_set_trip_temp); -- cgit v1.2.3 From fe61b2906bd046535f4ef7dfcd69562f531ccd38 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Mon, 20 May 2024 11:55:54 +0200 Subject: media: intel/ipu6: Fix some redundant resources freeing in ipu6_pci_remove() pcim_iomap_regions() and pcim_enable_device() are used in the probe. So the corresponding managed resources don't need to be freed explicitly in the remove function. Remove the incorrect pci_release_regions() and pci_disable_device() calls. Fixes: 25fedc021985 ("media: intel/ipu6: add Intel IPU6 PCI device driver") Signed-off-by: Christophe JAILLET Reviewed-by: Bingbu Cao Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil --- drivers/media/pci/intel/ipu6/ipu6.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/pci/intel/ipu6/ipu6.c b/drivers/media/pci/intel/ipu6/ipu6.c index d2bebd208461..f587f609259d 100644 --- a/drivers/media/pci/intel/ipu6/ipu6.c +++ b/drivers/media/pci/intel/ipu6/ipu6.c @@ -727,9 +727,6 @@ static void ipu6_pci_remove(struct pci_dev *pdev) pm_runtime_forbid(&pdev->dev); pm_runtime_get_noresume(&pdev->dev); - pci_release_regions(pdev); - pci_disable_device(pdev); - release_firmware(isp->cpd_fw); ipu6_mmu_cleanup(psys_mmu); -- cgit v1.2.3 From 266b44ec9a26dd2ad5d1dfcbb2f7f4e2c10da3fb Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sun, 26 May 2024 09:59:56 +0200 Subject: media: intel/ipu6: Move isys_remove() close to isys_probe() In preparation to fixing a leak in isys_probe(), move isys_remove(). The fix will introduce a new function that will also be called from isys_remove(). The code needs to be rearranged to avoid a forward declaration. Having the .remove function close to the .probe function is also more standard. Signed-off-by: Christophe JAILLET Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil --- drivers/media/pci/intel/ipu6/ipu6-isys.c | 70 ++++++++++++++++---------------- 1 file changed, 35 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/media/pci/intel/ipu6/ipu6-isys.c b/drivers/media/pci/intel/ipu6/ipu6-isys.c index 5992138c7290..7ce2047a09b5 100644 --- a/drivers/media/pci/intel/ipu6/ipu6-isys.c +++ b/drivers/media/pci/intel/ipu6/ipu6-isys.c @@ -925,41 +925,6 @@ static const struct dev_pm_ops isys_pm_ops = { .resume = isys_resume, }; -static void isys_remove(struct auxiliary_device *auxdev) -{ - struct ipu6_bus_device *adev = auxdev_to_adev(auxdev); - struct ipu6_isys *isys = dev_get_drvdata(&auxdev->dev); - struct ipu6_device *isp = adev->isp; - struct isys_fw_msgs *fwmsg, *safe; - unsigned int i; - - list_for_each_entry_safe(fwmsg, safe, &isys->framebuflist, head) - dma_free_attrs(&auxdev->dev, sizeof(struct isys_fw_msgs), - fwmsg, fwmsg->dma_addr, 0); - - list_for_each_entry_safe(fwmsg, safe, &isys->framebuflist_fw, head) - dma_free_attrs(&auxdev->dev, sizeof(struct isys_fw_msgs), - fwmsg, fwmsg->dma_addr, 0); - - isys_unregister_devices(isys); - isys_notifier_cleanup(isys); - - cpu_latency_qos_remove_request(&isys->pm_qos); - - if (!isp->secure_mode) { - ipu6_cpd_free_pkg_dir(adev); - ipu6_buttress_unmap_fw_image(adev, &adev->fw_sgt); - release_firmware(adev->fw); - } - - for (i = 0; i < IPU6_ISYS_MAX_STREAMS; i++) - mutex_destroy(&isys->streams[i].mutex); - - isys_iwake_watermark_cleanup(isys); - mutex_destroy(&isys->stream_mutex); - mutex_destroy(&isys->mutex); -} - static int alloc_fw_msg_bufs(struct ipu6_isys *isys, int amount) { struct device *dev = &isys->adev->auxdev.dev; @@ -1167,6 +1132,41 @@ release_firmware: return ret; } +static void isys_remove(struct auxiliary_device *auxdev) +{ + struct ipu6_bus_device *adev = auxdev_to_adev(auxdev); + struct ipu6_isys *isys = dev_get_drvdata(&auxdev->dev); + struct ipu6_device *isp = adev->isp; + struct isys_fw_msgs *fwmsg, *safe; + unsigned int i; + + list_for_each_entry_safe(fwmsg, safe, &isys->framebuflist, head) + dma_free_attrs(&auxdev->dev, sizeof(struct isys_fw_msgs), + fwmsg, fwmsg->dma_addr, 0); + + list_for_each_entry_safe(fwmsg, safe, &isys->framebuflist_fw, head) + dma_free_attrs(&auxdev->dev, sizeof(struct isys_fw_msgs), + fwmsg, fwmsg->dma_addr, 0); + + isys_unregister_devices(isys); + isys_notifier_cleanup(isys); + + cpu_latency_qos_remove_request(&isys->pm_qos); + + if (!isp->secure_mode) { + ipu6_cpd_free_pkg_dir(adev); + ipu6_buttress_unmap_fw_image(adev, &adev->fw_sgt); + release_firmware(adev->fw); + } + + for (i = 0; i < IPU6_ISYS_MAX_STREAMS; i++) + mutex_destroy(&isys->streams[i].mutex); + + isys_iwake_watermark_cleanup(isys); + mutex_destroy(&isys->stream_mutex); + mutex_destroy(&isys->mutex); +} + struct fwmsg { int type; char *msg; -- cgit v1.2.3 From ab0ed481012811fed052f609b364c118ce8a576e Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sun, 26 May 2024 09:59:57 +0200 Subject: media: intel/ipu6: Fix an error handling path in isys_probe() If an error occurs after a successful alloc_fw_msg_bufs() call, some resources should be released as already done in the remove function. Add a new free_fw_msg_bufs() function that releases what has been allocated by alloc_fw_msg_bufs(). Also use this new function in isys_remove() to avoid some code duplication. Fixes: f50c4ca0a820 ("media: intel/ipu6: add the main input system driver") Signed-off-by: Christophe JAILLET Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil --- drivers/media/pci/intel/ipu6/ipu6-isys.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/media/pci/intel/ipu6/ipu6-isys.c b/drivers/media/pci/intel/ipu6/ipu6-isys.c index 7ce2047a09b5..1998b72ac07d 100644 --- a/drivers/media/pci/intel/ipu6/ipu6-isys.c +++ b/drivers/media/pci/intel/ipu6/ipu6-isys.c @@ -925,6 +925,20 @@ static const struct dev_pm_ops isys_pm_ops = { .resume = isys_resume, }; +static void free_fw_msg_bufs(struct ipu6_isys *isys) +{ + struct device *dev = &isys->adev->auxdev.dev; + struct isys_fw_msgs *fwmsg, *safe; + + list_for_each_entry_safe(fwmsg, safe, &isys->framebuflist, head) + dma_free_attrs(dev, sizeof(struct isys_fw_msgs), fwmsg, + fwmsg->dma_addr, 0); + + list_for_each_entry_safe(fwmsg, safe, &isys->framebuflist_fw, head) + dma_free_attrs(dev, sizeof(struct isys_fw_msgs), fwmsg, + fwmsg->dma_addr, 0); +} + static int alloc_fw_msg_bufs(struct ipu6_isys *isys, int amount) { struct device *dev = &isys->adev->auxdev.dev; @@ -1105,12 +1119,14 @@ static int isys_probe(struct auxiliary_device *auxdev, ret = isys_register_devices(isys); if (ret) - goto out_remove_pkg_dir_shared_buffer; + goto free_fw_msg_bufs; ipu6_mmu_hw_cleanup(adev->mmu); return 0; +free_fw_msg_bufs: + free_fw_msg_bufs(isys); out_remove_pkg_dir_shared_buffer: if (!isp->secure_mode) ipu6_cpd_free_pkg_dir(adev); @@ -1137,16 +1153,9 @@ static void isys_remove(struct auxiliary_device *auxdev) struct ipu6_bus_device *adev = auxdev_to_adev(auxdev); struct ipu6_isys *isys = dev_get_drvdata(&auxdev->dev); struct ipu6_device *isp = adev->isp; - struct isys_fw_msgs *fwmsg, *safe; unsigned int i; - list_for_each_entry_safe(fwmsg, safe, &isys->framebuflist, head) - dma_free_attrs(&auxdev->dev, sizeof(struct isys_fw_msgs), - fwmsg, fwmsg->dma_addr, 0); - - list_for_each_entry_safe(fwmsg, safe, &isys->framebuflist_fw, head) - dma_free_attrs(&auxdev->dev, sizeof(struct isys_fw_msgs), - fwmsg, fwmsg->dma_addr, 0); + free_fw_msg_bufs(isys); isys_unregister_devices(isys); isys_notifier_cleanup(isys); -- cgit v1.2.3 From c19fa08c1414644b0d9275d336bdaff90af57d0b Mon Sep 17 00:00:00 2001 From: Bingbu Cao Date: Mon, 27 May 2024 18:48:57 +0800 Subject: media: intel/ipu6: fix the buffer flags caused by wrong parentheses The buffer flags is set by wrong due to wrong parentheses, the FL_INCOMING flag is never taken an account. Fix it by wrapping the ternary conditional operation with parentheses. Fixes: 3c1dfb5a69cf ("media: intel/ipu6: input system video nodes and buffer queues") Signed-off-by: Bingbu Cao Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil --- drivers/media/pci/intel/ipu6/ipu6-isys-queue.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/pci/intel/ipu6/ipu6-isys-queue.c b/drivers/media/pci/intel/ipu6/ipu6-isys-queue.c index 40a8ebfcfce2..4bd4e324abc9 100644 --- a/drivers/media/pci/intel/ipu6/ipu6-isys-queue.c +++ b/drivers/media/pci/intel/ipu6/ipu6-isys-queue.c @@ -301,10 +301,10 @@ static int ipu6_isys_stream_start(struct ipu6_isys_video *av, out_requeue: if (bl && bl->nbufs) ipu6_isys_buffer_list_queue(bl, - (IPU6_ISYS_BUFFER_LIST_FL_INCOMING | - error) ? + IPU6_ISYS_BUFFER_LIST_FL_INCOMING | + (error ? IPU6_ISYS_BUFFER_LIST_FL_SET_STATE : - 0, error ? VB2_BUF_STATE_ERROR : + 0), error ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_QUEUED); flush_firmware_streamon_fail(stream); -- cgit v1.2.3 From a0fc1a053b7a212244ff109e44469b8deff280c5 Mon Sep 17 00:00:00 2001 From: Jeff Johnson Date: Fri, 24 May 2024 16:58:26 -0700 Subject: of: of_test: add MODULE_DESCRIPTION() Fix the 'make W=1' warning: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/of/of_test.o Signed-off-by: Jeff Johnson Link: https://lore.kernel.org/r/20240524-md-of-of_test-v1-1-6ebd078d620f@quicinc.com Signed-off-by: Rob Herring (Arm) --- drivers/of/of_test.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/of/of_test.c b/drivers/of/of_test.c index a9301d293f01..c85a258bc6ae 100644 --- a/drivers/of/of_test.c +++ b/drivers/of/of_test.c @@ -54,4 +54,5 @@ static struct kunit_suite of_dtb_suite = { kunit_test_suites( &of_dtb_suite, ); +MODULE_DESCRIPTION("KUnit tests for OF APIs"); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From c7a5096781732e0f9784551309484f3e103f6750 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 28 May 2024 13:25:02 +0300 Subject: PNP: Make dev_is_pnp() to be a function and export it for modules Since we have a dev_is_pnp() macro that utilises the address of the pnp_bus_type variable, the users, which can be compiled as modules, will fail to build. Convert the macro to be a function and export it to the modules to prevent build breakage. Reported-by: Woody Suwalski Closes: https://lore.kernel.org/r/cc8a93b2-2504-9754-e26c-5d5c3bd1265c@gmail.com Fixes: 2a49b45cd0e7 ("PNP: Add dev_is_pnp() macro") Signed-off-by: Andy Shevchenko Reviewed-by: Christoph Hellwig Signed-off-by: Rafael J. Wysocki --- drivers/pnp/driver.c | 6 ++++++ include/linux/pnp.h | 4 ++-- 2 files changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pnp/driver.c b/drivers/pnp/driver.c index 0a5d0d8befa8..3483e52e3a81 100644 --- a/drivers/pnp/driver.c +++ b/drivers/pnp/driver.c @@ -266,6 +266,12 @@ const struct bus_type pnp_bus_type = { .dev_groups = pnp_dev_groups, }; +bool dev_is_pnp(const struct device *dev) +{ + return dev->bus == &pnp_bus_type; +} +EXPORT_SYMBOL_GPL(dev_is_pnp); + int pnp_register_driver(struct pnp_driver *drv) { drv->driver.name = drv->name; diff --git a/include/linux/pnp.h b/include/linux/pnp.h index 82561242cda4..a8def1cea32c 100644 --- a/include/linux/pnp.h +++ b/include/linux/pnp.h @@ -469,7 +469,7 @@ int compare_pnp_id(struct pnp_id *pos, const char *id); int pnp_register_driver(struct pnp_driver *drv); void pnp_unregister_driver(struct pnp_driver *drv); -#define dev_is_pnp(d) ((d)->bus == &pnp_bus_type) +bool dev_is_pnp(const struct device *dev); #else @@ -502,7 +502,7 @@ static inline int compare_pnp_id(struct pnp_id *pos, const char *id) { return -E static inline int pnp_register_driver(struct pnp_driver *drv) { return -ENODEV; } static inline void pnp_unregister_driver(struct pnp_driver *drv) { } -#define dev_is_pnp(d) false +static inline bool dev_is_pnp(const struct device *dev) { return false; } #endif /* CONFIG_PNP */ -- cgit v1.2.3 From edcde848c01eb071a91d479a6b3101d9cf48e905 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 28 May 2024 13:25:03 +0300 Subject: PNP: Hide pnp_bus_type from the non-PNP code The pnp_bus_type is defined only when CONFIG_PNP=y, while being not guarded by ifdeffery in the header. Moreover, it's not used outside of the PNP code. Move it to the internal header to make sure no-one will try to (ab)use it. Signed-off-by: Andy Shevchenko Reviewed-by: Christoph Hellwig Signed-off-by: Rafael J. Wysocki --- drivers/pnp/base.h | 1 + include/linux/pnp.h | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pnp/base.h b/drivers/pnp/base.h index e74a0f6a3157..4e80273dfb1e 100644 --- a/drivers/pnp/base.h +++ b/drivers/pnp/base.h @@ -6,6 +6,7 @@ extern struct mutex pnp_lock; extern const struct attribute_group *pnp_dev_groups[]; +extern const struct bus_type pnp_bus_type; int pnp_register_protocol(struct pnp_protocol *protocol); void pnp_unregister_protocol(struct pnp_protocol *protocol); diff --git a/include/linux/pnp.h b/include/linux/pnp.h index a8def1cea32c..7f2ff95d2deb 100644 --- a/include/linux/pnp.h +++ b/include/linux/pnp.h @@ -435,8 +435,6 @@ struct pnp_protocol { #define protocol_for_each_dev(protocol, dev) \ list_for_each_entry(dev, &(protocol)->devices, protocol_list) -extern const struct bus_type pnp_bus_type; - #if defined(CONFIG_PNP) /* device management */ -- cgit v1.2.3 From ac62f52138f752d6c74adc6321e4996d84caf5bb Mon Sep 17 00:00:00 2001 From: Thomas Weißschuh Date: Sun, 26 May 2024 23:40:01 +0200 Subject: ACPI: AC: Properly notify powermanagement core about changes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The powermanagement core does various actions when a powersupply changes. It calls into notifiers, LED triggers, other power supplies and emits an uevent. To make sure that all these actions happen properly call power_supply_changed(). Reported-by: Rajas Paranjpe Closes: https://github.com/MrChromebox/firmware/issues/420#issuecomment-2132251318 Signed-off-by: Thomas Weißschuh Reviewed-by: Sebastian Reichel Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ac.c | 4 ++-- drivers/acpi/sbs.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index 2d4a35e6dd18..09a87fa222c7 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -145,7 +145,7 @@ static void acpi_ac_notify(acpi_handle handle, u32 event, void *data) dev_name(&adev->dev), event, (u32) ac->state); acpi_notifier_call_chain(adev, event, (u32) ac->state); - kobject_uevent(&ac->charger->dev.kobj, KOBJ_CHANGE); + power_supply_changed(ac->charger); } } @@ -268,7 +268,7 @@ static int acpi_ac_resume(struct device *dev) if (acpi_ac_get_state(ac)) return 0; if (old_state != ac->state) - kobject_uevent(&ac->charger->dev.kobj, KOBJ_CHANGE); + power_supply_changed(ac->charger); return 0; } diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c index 94e3c000df2e..dc8164b182dc 100644 --- a/drivers/acpi/sbs.c +++ b/drivers/acpi/sbs.c @@ -610,7 +610,7 @@ static void acpi_sbs_callback(void *context) if (sbs->charger_exists) { acpi_ac_get_present(sbs); if (sbs->charger_present != saved_charger_state) - kobject_uevent(&sbs->charger->dev.kobj, KOBJ_CHANGE); + power_supply_changed(sbs->charger); } if (sbs->manager_present) { @@ -622,7 +622,7 @@ static void acpi_sbs_callback(void *context) acpi_battery_read(bat); if (saved_battery_state == bat->present) continue; - kobject_uevent(&bat->bat->dev.kobj, KOBJ_CHANGE); + power_supply_changed(bat->bat); } } } -- cgit v1.2.3 From 779b8a14afde110dd3502566be907289eba72447 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 28 May 2024 14:09:23 +0200 Subject: cpufreq: amd-pstate: remove global header file When extra warnings are enabled, gcc points out a global variable definition in a header: In file included from drivers/cpufreq/amd-pstate-ut.c:29: include/linux/amd-pstate.h:123:27: error: 'amd_pstate_mode_string' defined but not used [-Werror=unused-const-variable=] 123 | static const char * const amd_pstate_mode_string[] = { | ^~~~~~~~~~~~~~~~~~~~~~ This header is only included from two files in the same directory, and one of them uses only a single definition from it, so clean it up by moving most of the contents into the driver that uses them, and making shared bits a local header file. Fixes: 36c5014e5460 ("cpufreq: amd-pstate: optimize driver working mode selection in amd_pstate_param()") Signed-off-by: Arnd Bergmann Acked-by: Mario Limonciello Signed-off-by: Rafael J. Wysocki --- MAINTAINERS | 1 - drivers/cpufreq/amd-pstate-ut.c | 3 +- drivers/cpufreq/amd-pstate.c | 34 +++++++++- drivers/cpufreq/amd-pstate.h | 104 ++++++++++++++++++++++++++++++ include/linux/amd-pstate.h | 137 ---------------------------------------- 5 files changed, 139 insertions(+), 140 deletions(-) create mode 100644 drivers/cpufreq/amd-pstate.h delete mode 100644 include/linux/amd-pstate.h (limited to 'drivers') diff --git a/MAINTAINERS b/MAINTAINERS index d6c90161c7bf..fc31870379f8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1107,7 +1107,6 @@ L: linux-pm@vger.kernel.org S: Supported F: Documentation/admin-guide/pm/amd-pstate.rst F: drivers/cpufreq/amd-pstate* -F: include/linux/amd-pstate.h F: tools/power/x86/amd_pstate_tracer/amd_pstate_trace.py AMD PTDMA DRIVER diff --git a/drivers/cpufreq/amd-pstate-ut.c b/drivers/cpufreq/amd-pstate-ut.c index f04ae67dda37..fc275d41d51e 100644 --- a/drivers/cpufreq/amd-pstate-ut.c +++ b/drivers/cpufreq/amd-pstate-ut.c @@ -26,10 +26,11 @@ #include #include #include -#include #include +#include "amd-pstate.h" + /* * Abbreviations: * amd_pstate_ut: used as a shortform for AMD P-State unit test. diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c index 1b7e82a0ad2e..91993647e09e 100644 --- a/drivers/cpufreq/amd-pstate.c +++ b/drivers/cpufreq/amd-pstate.c @@ -36,7 +36,6 @@ #include #include #include -#include #include #include @@ -46,6 +45,8 @@ #include #include #include + +#include "amd-pstate.h" #include "amd-pstate-trace.h" #define AMD_PSTATE_TRANSITION_LATENCY 20000 @@ -53,6 +54,37 @@ #define CPPC_HIGHEST_PERF_PERFORMANCE 196 #define CPPC_HIGHEST_PERF_DEFAULT 166 +#define AMD_CPPC_EPP_PERFORMANCE 0x00 +#define AMD_CPPC_EPP_BALANCE_PERFORMANCE 0x80 +#define AMD_CPPC_EPP_BALANCE_POWERSAVE 0xBF +#define AMD_CPPC_EPP_POWERSAVE 0xFF + +/* + * enum amd_pstate_mode - driver working mode of amd pstate + */ +enum amd_pstate_mode { + AMD_PSTATE_UNDEFINED = 0, + AMD_PSTATE_DISABLE, + AMD_PSTATE_PASSIVE, + AMD_PSTATE_ACTIVE, + AMD_PSTATE_GUIDED, + AMD_PSTATE_MAX, +}; + +static const char * const amd_pstate_mode_string[] = { + [AMD_PSTATE_UNDEFINED] = "undefined", + [AMD_PSTATE_DISABLE] = "disable", + [AMD_PSTATE_PASSIVE] = "passive", + [AMD_PSTATE_ACTIVE] = "active", + [AMD_PSTATE_GUIDED] = "guided", + NULL, +}; + +struct quirk_entry { + u32 nominal_freq; + u32 lowest_freq; +}; + /* * TODO: We need more time to fine tune processors with shared memory solution * with community together. diff --git a/drivers/cpufreq/amd-pstate.h b/drivers/cpufreq/amd-pstate.h new file mode 100644 index 000000000000..e6a28e7f4dbf --- /dev/null +++ b/drivers/cpufreq/amd-pstate.h @@ -0,0 +1,104 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2022 Advanced Micro Devices, Inc. + * + * Author: Meng Li + */ + +#ifndef _LINUX_AMD_PSTATE_H +#define _LINUX_AMD_PSTATE_H + +#include + +/********************************************************************* + * AMD P-state INTERFACE * + *********************************************************************/ +/** + * struct amd_aperf_mperf + * @aperf: actual performance frequency clock count + * @mperf: maximum performance frequency clock count + * @tsc: time stamp counter + */ +struct amd_aperf_mperf { + u64 aperf; + u64 mperf; + u64 tsc; +}; + +/** + * struct amd_cpudata - private CPU data for AMD P-State + * @cpu: CPU number + * @req: constraint request to apply + * @cppc_req_cached: cached performance request hints + * @highest_perf: the maximum performance an individual processor may reach, + * assuming ideal conditions + * For platforms that do not support the preferred core feature, the + * highest_pef may be configured with 166 or 255, to avoid max frequency + * calculated wrongly. we take the fixed value as the highest_perf. + * @nominal_perf: the maximum sustained performance level of the processor, + * assuming ideal operating conditions + * @lowest_nonlinear_perf: the lowest performance level at which nonlinear power + * savings are achieved + * @lowest_perf: the absolute lowest performance level of the processor + * @prefcore_ranking: the preferred core ranking, the higher value indicates a higher + * priority. + * @min_limit_perf: Cached value of the performance corresponding to policy->min + * @max_limit_perf: Cached value of the performance corresponding to policy->max + * @min_limit_freq: Cached value of policy->min (in khz) + * @max_limit_freq: Cached value of policy->max (in khz) + * @max_freq: the frequency (in khz) that mapped to highest_perf + * @min_freq: the frequency (in khz) that mapped to lowest_perf + * @nominal_freq: the frequency (in khz) that mapped to nominal_perf + * @lowest_nonlinear_freq: the frequency (in khz) that mapped to lowest_nonlinear_perf + * @cur: Difference of Aperf/Mperf/tsc count between last and current sample + * @prev: Last Aperf/Mperf/tsc count value read from register + * @freq: current cpu frequency value (in khz) + * @boost_supported: check whether the Processor or SBIOS supports boost mode + * @hw_prefcore: check whether HW supports preferred core featue. + * Only when hw_prefcore and early prefcore param are true, + * AMD P-State driver supports preferred core featue. + * @epp_policy: Last saved policy used to set energy-performance preference + * @epp_cached: Cached CPPC energy-performance preference value + * @policy: Cpufreq policy value + * @cppc_cap1_cached Cached MSR_AMD_CPPC_CAP1 register value + * + * The amd_cpudata is key private data for each CPU thread in AMD P-State, and + * represents all the attributes and goals that AMD P-State requests at runtime. + */ +struct amd_cpudata { + int cpu; + + struct freq_qos_request req[2]; + u64 cppc_req_cached; + + u32 highest_perf; + u32 nominal_perf; + u32 lowest_nonlinear_perf; + u32 lowest_perf; + u32 prefcore_ranking; + u32 min_limit_perf; + u32 max_limit_perf; + u32 min_limit_freq; + u32 max_limit_freq; + + u32 max_freq; + u32 min_freq; + u32 nominal_freq; + u32 lowest_nonlinear_freq; + + struct amd_aperf_mperf cur; + struct amd_aperf_mperf prev; + + u64 freq; + bool boost_supported; + bool hw_prefcore; + + /* EPP feature related attributes*/ + s16 epp_policy; + s16 epp_cached; + u32 policy; + u64 cppc_cap1_cached; + bool suspended; +}; + +#endif /* _LINUX_AMD_PSTATE_H */ diff --git a/include/linux/amd-pstate.h b/include/linux/amd-pstate.h deleted file mode 100644 index d58fc022ec46..000000000000 --- a/include/linux/amd-pstate.h +++ /dev/null @@ -1,137 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/include/linux/amd-pstate.h - * - * Copyright (C) 2022 Advanced Micro Devices, Inc. - * - * Author: Meng Li - */ - -#ifndef _LINUX_AMD_PSTATE_H -#define _LINUX_AMD_PSTATE_H - -#include - -#define AMD_CPPC_EPP_PERFORMANCE 0x00 -#define AMD_CPPC_EPP_BALANCE_PERFORMANCE 0x80 -#define AMD_CPPC_EPP_BALANCE_POWERSAVE 0xBF -#define AMD_CPPC_EPP_POWERSAVE 0xFF - -/********************************************************************* - * AMD P-state INTERFACE * - *********************************************************************/ -/** - * struct amd_aperf_mperf - * @aperf: actual performance frequency clock count - * @mperf: maximum performance frequency clock count - * @tsc: time stamp counter - */ -struct amd_aperf_mperf { - u64 aperf; - u64 mperf; - u64 tsc; -}; - -/** - * struct amd_cpudata - private CPU data for AMD P-State - * @cpu: CPU number - * @req: constraint request to apply - * @cppc_req_cached: cached performance request hints - * @highest_perf: the maximum performance an individual processor may reach, - * assuming ideal conditions - * For platforms that do not support the preferred core feature, the - * highest_pef may be configured with 166 or 255, to avoid max frequency - * calculated wrongly. we take the fixed value as the highest_perf. - * @nominal_perf: the maximum sustained performance level of the processor, - * assuming ideal operating conditions - * @lowest_nonlinear_perf: the lowest performance level at which nonlinear power - * savings are achieved - * @lowest_perf: the absolute lowest performance level of the processor - * @prefcore_ranking: the preferred core ranking, the higher value indicates a higher - * priority. - * @min_limit_perf: Cached value of the performance corresponding to policy->min - * @max_limit_perf: Cached value of the performance corresponding to policy->max - * @min_limit_freq: Cached value of policy->min (in khz) - * @max_limit_freq: Cached value of policy->max (in khz) - * @max_freq: the frequency (in khz) that mapped to highest_perf - * @min_freq: the frequency (in khz) that mapped to lowest_perf - * @nominal_freq: the frequency (in khz) that mapped to nominal_perf - * @lowest_nonlinear_freq: the frequency (in khz) that mapped to lowest_nonlinear_perf - * @cur: Difference of Aperf/Mperf/tsc count between last and current sample - * @prev: Last Aperf/Mperf/tsc count value read from register - * @freq: current cpu frequency value (in khz) - * @boost_supported: check whether the Processor or SBIOS supports boost mode - * @hw_prefcore: check whether HW supports preferred core featue. - * Only when hw_prefcore and early prefcore param are true, - * AMD P-State driver supports preferred core featue. - * @epp_policy: Last saved policy used to set energy-performance preference - * @epp_cached: Cached CPPC energy-performance preference value - * @policy: Cpufreq policy value - * @cppc_cap1_cached Cached MSR_AMD_CPPC_CAP1 register value - * - * The amd_cpudata is key private data for each CPU thread in AMD P-State, and - * represents all the attributes and goals that AMD P-State requests at runtime. - */ -struct amd_cpudata { - int cpu; - - struct freq_qos_request req[2]; - u64 cppc_req_cached; - - u32 highest_perf; - u32 nominal_perf; - u32 lowest_nonlinear_perf; - u32 lowest_perf; - u32 prefcore_ranking; - u32 min_limit_perf; - u32 max_limit_perf; - u32 min_limit_freq; - u32 max_limit_freq; - - u32 max_freq; - u32 min_freq; - u32 nominal_freq; - u32 lowest_nonlinear_freq; - - struct amd_aperf_mperf cur; - struct amd_aperf_mperf prev; - - u64 freq; - bool boost_supported; - bool hw_prefcore; - - /* EPP feature related attributes*/ - s16 epp_policy; - s16 epp_cached; - u32 policy; - u64 cppc_cap1_cached; - bool suspended; -}; - -/* - * enum amd_pstate_mode - driver working mode of amd pstate - */ -enum amd_pstate_mode { - AMD_PSTATE_UNDEFINED = 0, - AMD_PSTATE_DISABLE, - AMD_PSTATE_PASSIVE, - AMD_PSTATE_ACTIVE, - AMD_PSTATE_GUIDED, - AMD_PSTATE_MAX, -}; - -static const char * const amd_pstate_mode_string[] = { - [AMD_PSTATE_UNDEFINED] = "undefined", - [AMD_PSTATE_DISABLE] = "disable", - [AMD_PSTATE_PASSIVE] = "passive", - [AMD_PSTATE_ACTIVE] = "active", - [AMD_PSTATE_GUIDED] = "guided", - NULL, -}; - -struct quirk_entry { - u32 nominal_freq; - u32 lowest_freq; -}; - -#endif /* _LINUX_AMD_PSTATE_H */ -- cgit v1.2.3 From e4731baaf29438508197d3a8a6d4f5a8c51663f8 Mon Sep 17 00:00:00 2001 From: Dhananjay Ugwekar Date: Mon, 27 May 2024 10:41:28 +0530 Subject: cpufreq: amd-pstate: Fix the inconsistency in max frequency units The nominal frequency in cpudata is maintained in MHz whereas all other frequencies are in KHz. This means we have to convert nominal frequency value to KHz before we do any interaction with other frequency values. In amd_pstate_set_boost(), this conversion from MHz to KHz is missed, fix that. Tested on a AMD Zen4 EPYC server Before: $ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq 2151 $ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq 400000 $ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq 2151 409422 After: $ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq 2151000 $ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq 400000 $ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq 2151000 1799527 Fixes: ec437d71db77 ("cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors") Signed-off-by: Dhananjay Ugwekar Acked-by: Mario Limonciello Acked-by: Gautham R. Shenoy Tested-by: Peter Jung Cc: 5.17+ # 5.17+ Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/amd-pstate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c index 91993647e09e..9ad62dbe8bfb 100644 --- a/drivers/cpufreq/amd-pstate.c +++ b/drivers/cpufreq/amd-pstate.c @@ -701,7 +701,7 @@ static int amd_pstate_set_boost(struct cpufreq_policy *policy, int state) if (state) policy->cpuinfo.max_freq = cpudata->max_freq; else - policy->cpuinfo.max_freq = cpudata->nominal_freq; + policy->cpuinfo.max_freq = cpudata->nominal_freq * 1000; policy->max = policy->cpuinfo.max_freq; -- cgit v1.2.3 From 49ba7b515c4c0719b866d16f068e62d16a8a3dd1 Mon Sep 17 00:00:00 2001 From: Li Zhijian Date: Tue, 7 May 2024 13:34:21 +0800 Subject: cxl/region: Fix memregion leaks in devm_cxl_add_region() Move the mode verification to __create_region() before allocating the memregion to avoid the memregion leaks. Fixes: 6e099264185d ("cxl/region: Add volatile region creation support") Signed-off-by: Li Zhijian Reviewed-by: Dan Williams Link: https://lore.kernel.org/r/20240507053421.456439-1-lizhijian@fujitsu.com Signed-off-by: Dave Jiang --- drivers/cxl/core/region.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c index 00a9f0eef8dd..3c2b6144be23 100644 --- a/drivers/cxl/core/region.c +++ b/drivers/cxl/core/region.c @@ -2352,15 +2352,6 @@ static struct cxl_region *devm_cxl_add_region(struct cxl_root_decoder *cxlrd, struct device *dev; int rc; - switch (mode) { - case CXL_DECODER_RAM: - case CXL_DECODER_PMEM: - break; - default: - dev_err(&cxlrd->cxlsd.cxld.dev, "unsupported mode %d\n", mode); - return ERR_PTR(-EINVAL); - } - cxlr = cxl_region_alloc(cxlrd, id); if (IS_ERR(cxlr)) return cxlr; @@ -2415,6 +2406,15 @@ static struct cxl_region *__create_region(struct cxl_root_decoder *cxlrd, { int rc; + switch (mode) { + case CXL_DECODER_RAM: + case CXL_DECODER_PMEM: + break; + default: + dev_err(&cxlrd->cxlsd.cxld.dev, "unsupported mode %d\n", mode); + return ERR_PTR(-EINVAL); + } + rc = memregion_alloc(GFP_KERNEL); if (rc < 0) return ERR_PTR(rc); -- cgit v1.2.3 From 92158790ce4391ce4c35d8dfbce759195e4724cb Mon Sep 17 00:00:00 2001 From: Miri Korenblit Date: Sun, 12 May 2024 15:25:00 +0300 Subject: wifi: iwlwifi: mvm: don't initialize csa_work twice The initialization of this worker moved to iwl_mvm_mac_init_mvmvif but we removed only from the pre-MLD version of the add_interface callback. Remove it also from the MLD version. Fixes: 0bcc2155983e ("wifi: iwlwifi: mvm: init vif works only once") Signed-off-by: Miri Korenblit Reviewed-by: Johannes Berg Link: https://msgid.link/20240512152312.4f15b41604f0.Iec912158e5a706175531d3736d77d25adf02fba4@changeid Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c index 0a3b7284eedd..fcfd2dd7568e 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c @@ -75,8 +75,6 @@ static int iwl_mvm_mld_mac_add_interface(struct ieee80211_hw *hw, goto out_free_bf; iwl_mvm_tcm_add_vif(mvm, vif); - INIT_DELAYED_WORK(&mvmvif->csa_work, - iwl_mvm_channel_switch_disconnect_wk); if (vif->type == NL80211_IFTYPE_MONITOR) { mvm->monitor_on = true; -- cgit v1.2.3 From 98b7017ddb914a32152ed9aec7468386fff85f8f Mon Sep 17 00:00:00 2001 From: Shaul Triebitz Date: Sun, 12 May 2024 15:25:04 +0300 Subject: wifi: iwlwifi: mvm: always set the TWT IE offset In beacon template version 14, make sure to always set the TWT IE offset before sending the beacon template command, also in the debugfs inject_beacon_ie path. If the TWT IE does not exist, the offset will be set to zero. Fixes: bf0212fd8faa ("wifi: iwlwifi: mvm: add beacon template version 14") Signed-off-by: Shaul Triebitz Signed-off-by: Miri Korenblit Link: https://msgid.link/20240512152312.eb27175c345a.If30ef24aba10fe47fd42a7a9703eb8903035e294@changeid Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c | 9 +++++++++ drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c | 2 +- drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 1 + 3 files changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c index 79f4ac8cbc72..8101ecbb478b 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c @@ -1617,6 +1617,15 @@ static int _iwl_dbgfs_inject_beacon_ie(struct iwl_mvm *mvm, char *bin, int len) &beacon_cmd.tim_size, beacon->data, beacon->len); + if (iwl_fw_lookup_cmd_ver(mvm->fw, + BEACON_TEMPLATE_CMD, 0) >= 14) { + u32 offset = iwl_mvm_find_ie_offset(beacon->data, + WLAN_EID_S1G_TWT, + beacon->len); + + beacon_cmd.btwt_offset = cpu_to_le32(offset); + } + iwl_mvm_mac_ctxt_send_beacon_cmd(mvm, beacon, &beacon_cmd, sizeof(beacon_cmd)); } diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c index 5a06f887769a..5144fa0f96b0 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c @@ -873,7 +873,7 @@ void iwl_mvm_mac_ctxt_set_tim(struct iwl_mvm *mvm, } } -static u32 iwl_mvm_find_ie_offset(u8 *beacon, u8 eid, u32 frame_size) +u32 iwl_mvm_find_ie_offset(u8 *beacon, u8 eid, u32 frame_size) { struct ieee80211_mgmt *mgmt = (void *)beacon; const u8 *ie; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h index 1f58c727fa63..0a1959bd4079 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h @@ -1758,6 +1758,7 @@ u8 iwl_mvm_next_antenna(struct iwl_mvm *mvm, u8 valid, u8 last_idx); void iwl_mvm_get_sync_time(struct iwl_mvm *mvm, int clock_type, u32 *gp2, u64 *boottime, ktime_t *realtime); u32 iwl_mvm_get_systime(struct iwl_mvm *mvm); +u32 iwl_mvm_find_ie_offset(u8 *beacon, u8 eid, u32 frame_size); /* Tx / Host Commands */ int __must_check iwl_mvm_send_cmd(struct iwl_mvm *mvm, -- cgit v1.2.3 From 788e4c75f831d06fcfbbec1d455fac429521e607 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 12 May 2024 07:31:06 +0300 Subject: wifi: iwlwifi: mvm: fix a crash on 7265 Since IWL_FW_CMD_VER_UNKNOWN = 99, then my change to consider cmd_ver >= 7 instead of cmd_ver = 7 included also firmwares that don't advertise the command version at all. This made us send a command with a bad size and because of that, the firmware hit a BAD_COMMAND immediately after handling the REDUCE_TX_POWER_CMD command. Fixes: 8f892e225f41 ("wifi: iwlwifi: mvm: support iwl_dev_tx_power_cmd_v8") Signed-off-by: Emmanuel Grumbach Reviewed-by: Johannes Berg Signed-off-by: Miri Korenblit Link: https://msgid.link/20240512072733.eb20ff5050d3.Ie4fc6f5496cd296fd6ff20d15e98676f28a3cccd@changeid Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c index e7f5978ef2d7..ca7fcae6995e 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c @@ -895,8 +895,8 @@ int iwl_mvm_sar_select_profile(struct iwl_mvm *mvm, int prof_a, int prof_b) int ret; u16 len = 0; u32 n_subbands; - u8 cmd_ver = iwl_fw_lookup_cmd_ver(mvm->fw, cmd_id, - IWL_FW_CMD_VER_UNKNOWN); + u8 cmd_ver = iwl_fw_lookup_cmd_ver(mvm->fw, cmd_id, 3); + if (cmd_ver >= 7) { len = sizeof(cmd.v7); n_subbands = IWL_NUM_SUB_BANDS_V2; -- cgit v1.2.3 From b7ffca99313d856f7d1cc89038d9061b128e8e97 Mon Sep 17 00:00:00 2001 From: Yedidya Benshimol Date: Fri, 10 May 2024 17:06:29 +0300 Subject: wifi: iwlwifi: mvm: d3: fix WoWLAN command version lookup After moving from commands to notificaitons in the d3 resume flow, removing the WOWLAN_GET_STATUSES and REPLY_OFFLOADS_QUERY_CMD causes the return of the default value when looking up their version. Returning zero here results in the driver sending the not supported NON_QOS_TX_COUNTER_CMD. Signed-off-by: Yedidya Benshimol Reviewed-by: Gregory Greenman Signed-off-by: Miri Korenblit Link: https://msgid.link/20240510170500.8cabfd580614.If3a0db9851f56041f8f5360959354abd5379224a@changeid Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c index 71e6b06481a9..e37ae34acba6 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c @@ -2341,7 +2341,8 @@ static bool iwl_mvm_setup_connection_keep(struct iwl_mvm *mvm, out: if (iwl_fw_lookup_notif_ver(mvm->fw, LONG_GROUP, - WOWLAN_GET_STATUSES, 0) < 10) { + WOWLAN_GET_STATUSES, + IWL_FW_CMD_VER_UNKNOWN) < 10) { mvmvif->seqno_valid = true; /* +0x10 because the set API expects next-to-use, not last-used */ mvmvif->seqno = status->non_qos_seq_ctr + 0x10; -- cgit v1.2.3 From 4a7aace2899711592327463c1a29ffee44fcc66e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 10 May 2024 17:06:33 +0300 Subject: wifi: iwlwifi: mvm: revert gen2 TX A-MPDU size to 64 We don't actually support >64 even for HE devices, so revert back to 64. This fixes an issue where the session is refused because the queue is configured differently from the actual session later. Fixes: 514c30696fbc ("iwlwifi: add support for IEEE802.11ax") Signed-off-by: Johannes Berg Reviewed-by: Liad Kaufman Reviewed-by: Luciano Coelho Signed-off-by: Miri Korenblit Link: https://msgid.link/20240510170500.52f7b4cf83aa.If47e43adddf7fe250ed7f5571fbb35d8221c7c47@changeid Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/rs.h | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rs.h b/drivers/net/wireless/intel/iwlwifi/mvm/rs.h index 376b23b409dc..6cd4ec4d8f34 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rs.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs.h @@ -122,13 +122,8 @@ enum { #define LINK_QUAL_AGG_FRAME_LIMIT_DEF (63) #define LINK_QUAL_AGG_FRAME_LIMIT_MAX (63) -/* - * FIXME - various places in firmware API still use u8, - * e.g. LQ command and SCD config command. - * This should be 256 instead. - */ -#define LINK_QUAL_AGG_FRAME_LIMIT_GEN2_DEF (255) -#define LINK_QUAL_AGG_FRAME_LIMIT_GEN2_MAX (255) +#define LINK_QUAL_AGG_FRAME_LIMIT_GEN2_DEF (64) +#define LINK_QUAL_AGG_FRAME_LIMIT_GEN2_MAX (64) #define LINK_QUAL_AGG_FRAME_LIMIT_MIN (0) #define LQ_SIZE 2 /* 2 mode tables: "Active" and "Search" */ -- cgit v1.2.3 From 0f2e9f6f21d1ff292363cdfb5bc4d492eeaff76e Mon Sep 17 00:00:00 2001 From: Mordechay Goodstein Date: Fri, 10 May 2024 17:06:35 +0300 Subject: wifi: iwlwifi: mvm: set properly mac header In the driver we only use skb_put* for adding data to the skb, hence data never moves and skb_reset_mac_haeder would set mac_header to the first time data was added and not to mac80211 header, fix this my using the actual len of bytes added for setting the mac header. Fixes: 3f7a9d577d47 ("wifi: iwlwifi: mvm: simplify by using SKB MAC header pointer") Signed-off-by: Mordechay Goodstein Reviewed-by: Johannes Berg Signed-off-by: Miri Korenblit Link: https://msgid.link/20240510170500.12f2de2909c3.I72a819b96f2fe55bde192a8fd31a4b96c301aa73@changeid Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c index d78af2928152..489cfb0a4ab1 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c @@ -2450,8 +2450,11 @@ void iwl_mvm_rx_monitor_no_data(struct iwl_mvm *mvm, struct napi_struct *napi, * * We mark it as mac header, for upper layers to know where * all radio tap header ends. + * + * Since data doesn't move data while putting data on skb and that is + * the only way we use, data + len is the next place that hdr would be put */ - skb_reset_mac_header(skb); + skb_set_mac_header(skb, skb->len); /* * Override the nss from the rx_vec since the rate_n_flags has -- cgit v1.2.3 From 87821b67dea87addbc4ab093ba752753b002176a Mon Sep 17 00:00:00 2001 From: Shahar S Matityahu Date: Fri, 10 May 2024 17:06:39 +0300 Subject: wifi: iwlwifi: dbg_ini: move iwl_dbg_tlv_free outside of debugfs ifdef The driver should call iwl_dbg_tlv_free even if debugfs is not defined since ini mode does not depend on debugfs ifdef. Fixes: 68f6f492c4fa ("iwlwifi: trans: support loading ini TLVs from external file") Signed-off-by: Shahar S Matityahu Reviewed-by: Luciano Coelho Signed-off-by: Miri Korenblit Link: https://msgid.link/20240510170500.c8e3723f55b0.I5e805732b0be31ee6b83c642ec652a34e974ff10@changeid Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c index 33654f228ee8..d156a9c64194 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c @@ -1815,8 +1815,8 @@ struct iwl_drv *iwl_drv_start(struct iwl_trans *trans) err_fw: #ifdef CONFIG_IWLWIFI_DEBUGFS debugfs_remove_recursive(drv->dbgfs_drv); - iwl_dbg_tlv_free(drv->trans); #endif + iwl_dbg_tlv_free(drv->trans); kfree(drv); err: return ERR_PTR(ret); -- cgit v1.2.3 From cc3ba78f202de9752aceb16342ab62bdfbffac7e Mon Sep 17 00:00:00 2001 From: Benjamin Berg Date: Mon, 13 May 2024 13:27:08 +0300 Subject: wifi: iwlwifi: mvm: remove stale STA link data during restart If pre-recovery mac80211 tried to disable a link but this disablement failed, then there might be a mismatch between mac80211 assuming the link has been disabled and the driver still having the data around. During recover itself, that is not a problem, but should the link be activated again at a later point, iwlwifi will refuse the activation as it detects the inconsistent state. Solve this corner-case by iterating the station in the restart cleanup handler. Signed-off-by: Benjamin Berg Signed-off-by: Miri Korenblit Link: https://msgid.link/20240513132416.d2fd60338055.I840d4fdce5fd49fe69896d928b071067e3730259@changeid Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 37 +++++++++++++++++++++++ drivers/net/wireless/intel/iwlwifi/mvm/mld-sta.c | 10 +++--- drivers/net/wireless/intel/iwlwifi/mvm/sta.h | 5 +++ 3 files changed, 47 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index 486a6b8f3c97..628b50ee0244 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -1128,6 +1128,39 @@ static void iwl_mvm_cleanup_iterator(void *data, u8 *mac, RCU_INIT_POINTER(mvmvif->deflink.probe_resp_data, NULL); } +static void iwl_mvm_cleanup_sta_iterator(void *data, struct ieee80211_sta *sta) +{ + struct iwl_mvm *mvm = data; + struct iwl_mvm_sta *mvm_sta; + struct ieee80211_vif *vif; + int link_id; + + mvm_sta = iwl_mvm_sta_from_mac80211(sta); + vif = mvm_sta->vif; + + if (!sta->valid_links) + return; + + for (link_id = 0; link_id < ARRAY_SIZE((sta)->link); link_id++) { + struct iwl_mvm_link_sta *mvm_link_sta; + + mvm_link_sta = + rcu_dereference_check(mvm_sta->link[link_id], + lockdep_is_held(&mvm->mutex)); + if (mvm_link_sta && !(vif->active_links & BIT(link_id))) { + /* + * We have a link STA but the link is inactive in + * mac80211. This will happen if we failed to + * deactivate the link but mac80211 roll back the + * deactivation of the link. + * Delete the stale data to avoid issues later on. + */ + iwl_mvm_mld_free_sta_link(mvm, mvm_sta, mvm_link_sta, + link_id, false); + } + } +} + static void iwl_mvm_restart_cleanup(struct iwl_mvm *mvm) { iwl_mvm_stop_device(mvm); @@ -1150,6 +1183,10 @@ static void iwl_mvm_restart_cleanup(struct iwl_mvm *mvm) */ ieee80211_iterate_interfaces(mvm->hw, 0, iwl_mvm_cleanup_iterator, mvm); + /* cleanup stations as links may be gone after restart */ + ieee80211_iterate_stations_atomic(mvm->hw, + iwl_mvm_cleanup_sta_iterator, mvm); + mvm->p2p_device_vif = NULL; iwl_mvm_reset_phy_ctxts(mvm); diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mld-sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/mld-sta.c index b7a461dba41e..ae3cde0e64f3 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mld-sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mld-sta.c @@ -515,11 +515,11 @@ static int iwl_mvm_mld_cfg_sta(struct iwl_mvm *mvm, struct ieee80211_sta *sta, return iwl_mvm_mld_send_sta_cmd(mvm, &cmd); } -static void iwl_mvm_mld_free_sta_link(struct iwl_mvm *mvm, - struct iwl_mvm_sta *mvm_sta, - struct iwl_mvm_link_sta *mvm_sta_link, - unsigned int link_id, - bool is_in_fw) +void iwl_mvm_mld_free_sta_link(struct iwl_mvm *mvm, + struct iwl_mvm_sta *mvm_sta, + struct iwl_mvm_link_sta *mvm_sta_link, + unsigned int link_id, + bool is_in_fw) { RCU_INIT_POINTER(mvm->fw_id_to_mac_id[mvm_sta_link->sta_id], is_in_fw ? ERR_PTR(-EINVAL) : NULL); diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h index 264f1f9394b6..754a05a8c189 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h @@ -662,6 +662,11 @@ int iwl_mvm_mld_update_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_sta *sta); int iwl_mvm_mld_rm_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_sta *sta); +void iwl_mvm_mld_free_sta_link(struct iwl_mvm *mvm, + struct iwl_mvm_sta *mvm_sta, + struct iwl_mvm_link_sta *mvm_sta_link, + unsigned int link_id, + bool is_in_fw); int iwl_mvm_mld_rm_sta_id(struct iwl_mvm *mvm, u8 sta_id); int iwl_mvm_mld_update_sta_links(struct iwl_mvm *mvm, struct ieee80211_vif *vif, -- cgit v1.2.3 From 08b16d1b5997dc378533318e2a9cd73c7a898284 Mon Sep 17 00:00:00 2001 From: Yedidya Benshimol Date: Mon, 13 May 2024 13:27:09 +0300 Subject: wifi: iwlwifi: mvm: Handle BIGTK cipher in kek_kck cmd The BIGTK cipher field was added to the kek_kck_material_cmd but wasn't assigned. Fix that by differentiating between the IGTK/BIGTK keys and assign the ciphers fields accordingly. Signed-off-by: Yedidya Benshimol Signed-off-by: Miri Korenblit Link: https://msgid.link/20240513132416.7fd0b22b7267.Ie9b581652b74bd7806980364d59e1b2e78e682c0@changeid Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c index e37ae34acba6..54f4acbbd05b 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c @@ -595,6 +595,12 @@ static void iwl_mvm_wowlan_gtk_type_iter(struct ieee80211_hw *hw, void *_data) { struct wowlan_key_gtk_type_iter *data = _data; + __le32 *cipher = NULL; + + if (key->keyidx == 4 || key->keyidx == 5) + cipher = &data->kek_kck_cmd->igtk_cipher; + if (key->keyidx == 6 || key->keyidx == 7) + cipher = &data->kek_kck_cmd->bigtk_cipher; switch (key->cipher) { default: @@ -606,10 +612,13 @@ static void iwl_mvm_wowlan_gtk_type_iter(struct ieee80211_hw *hw, return; case WLAN_CIPHER_SUITE_BIP_GMAC_256: case WLAN_CIPHER_SUITE_BIP_GMAC_128: - data->kek_kck_cmd->igtk_cipher = cpu_to_le32(STA_KEY_FLG_GCMP); + if (cipher) + *cipher = cpu_to_le32(STA_KEY_FLG_GCMP); return; case WLAN_CIPHER_SUITE_AES_CMAC: - data->kek_kck_cmd->igtk_cipher = cpu_to_le32(STA_KEY_FLG_CCM); + case WLAN_CIPHER_SUITE_BIP_CMAC_256: + if (cipher) + *cipher = cpu_to_le32(STA_KEY_FLG_CCM); return; case WLAN_CIPHER_SUITE_CCMP: if (!sta) -- cgit v1.2.3 From 4d08c0b3357cba0aeffaf3abc62cae0c154f2816 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 13 May 2024 13:27:10 +0300 Subject: wifi: iwlwifi: mvm: handle BA session teardown in RF-kill When entering RF-kill, mac80211 tears down BA sessions, but due to RF-kill the commands aren't sent to the device. As a result, there can be frames pending on the reorder buffer or perhaps even received while doing so, leading to warnings. Avoid the warnings by doing the BA session teardown normally even in RF-kill, which also requires queue sync. Signed-off-by: Johannes Berg Signed-off-by: Miri Korenblit Link: https://msgid.link/20240513132416.0762cd80fb3d.I43c5877f3b546159b2db4f36d6d956b333c41cf0@changeid Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 2 +- drivers/net/wireless/intel/iwlwifi/mvm/mld-sta.c | 3 ++- drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 12 ++++++++---- 3 files changed, 11 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index 628b50ee0244..de9f0b446545 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -6385,7 +6385,7 @@ void iwl_mvm_sync_rx_queues_internal(struct iwl_mvm *mvm, .len[0] = sizeof(cmd), .data[1] = data, .len[1] = size, - .flags = sync ? 0 : CMD_ASYNC, + .flags = CMD_SEND_IN_RFKILL | (sync ? 0 : CMD_ASYNC), }; int ret; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mld-sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/mld-sta.c index ae3cde0e64f3..9d139b56e152 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mld-sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mld-sta.c @@ -1014,7 +1014,8 @@ static int iwl_mvm_mld_update_sta_baids(struct iwl_mvm *mvm, cmd.modify.tid = cpu_to_le32(data->tid); - ret = iwl_mvm_send_cmd_pdu(mvm, cmd_id, 0, sizeof(cmd), &cmd); + ret = iwl_mvm_send_cmd_pdu(mvm, cmd_id, CMD_SEND_IN_RFKILL, + sizeof(cmd), &cmd); data->sta_mask = new_sta_mask; if (ret) return ret; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index 20d4968d692a..cc79fe991c26 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -2848,7 +2848,12 @@ static int iwl_mvm_fw_baid_op_cmd(struct iwl_mvm *mvm, .action = start ? cpu_to_le32(IWL_RX_BAID_ACTION_ADD) : cpu_to_le32(IWL_RX_BAID_ACTION_REMOVE), }; - u32 cmd_id = WIDE_ID(DATA_PATH_GROUP, RX_BAID_ALLOCATION_CONFIG_CMD); + struct iwl_host_cmd hcmd = { + .id = WIDE_ID(DATA_PATH_GROUP, RX_BAID_ALLOCATION_CONFIG_CMD), + .flags = CMD_SEND_IN_RFKILL, + .len[0] = sizeof(cmd), + .data[0] = &cmd, + }; int ret; BUILD_BUG_ON(sizeof(struct iwl_rx_baid_cfg_resp) != sizeof(baid)); @@ -2860,7 +2865,7 @@ static int iwl_mvm_fw_baid_op_cmd(struct iwl_mvm *mvm, cmd.alloc.ssn = cpu_to_le16(ssn); cmd.alloc.win_size = cpu_to_le16(buf_size); baid = -EIO; - } else if (iwl_fw_lookup_cmd_ver(mvm->fw, cmd_id, 1) == 1) { + } else if (iwl_fw_lookup_cmd_ver(mvm->fw, hcmd.id, 1) == 1) { cmd.remove_v1.baid = cpu_to_le32(baid); BUILD_BUG_ON(sizeof(cmd.remove_v1) > sizeof(cmd.remove)); } else { @@ -2869,8 +2874,7 @@ static int iwl_mvm_fw_baid_op_cmd(struct iwl_mvm *mvm, cmd.remove.tid = cpu_to_le32(tid); } - ret = iwl_mvm_send_cmd_pdu_status(mvm, cmd_id, sizeof(cmd), - &cmd, &baid); + ret = iwl_mvm_send_cmd_status(mvm, &hcmd, &baid); if (ret) return ret; -- cgit v1.2.3 From 989830d1cf16bd149bf0690d889a9caef95fb5b1 Mon Sep 17 00:00:00 2001 From: Ayala Beker Date: Mon, 13 May 2024 13:27:11 +0300 Subject: wifi: iwlwifi: mvm: properly set 6 GHz channel direct probe option Ensure that the 6 GHz channel is configured with a valid direct BSSID, avoiding any invalid or multicast BSSID addresses. Signed-off-by: Ayala Beker Reviewed-by: Ilan Peer Signed-off-by: Miri Korenblit Link: https://msgid.link/20240513132416.91a631a0fe60.I2ea2616af9b8a2eaf959b156c69cf65a2f1204d4@changeid Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c index a7ec172eeade..890d4d79b172 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c @@ -1730,7 +1730,10 @@ iwl_mvm_umac_scan_fill_6g_chan_list(struct iwl_mvm *mvm, break; } - if (k == idex_b && idex_b < SCAN_BSSID_MAX_SIZE) { + if (k == idex_b && idex_b < SCAN_BSSID_MAX_SIZE && + !WARN_ONCE(!is_valid_ether_addr(scan_6ghz_params[j].bssid), + "scan: invalid BSSID at index %u, index_b=%u\n", + j, idex_b)) { memcpy(&pp->bssid_array[idex_b++], scan_6ghz_params[j].bssid, ETH_ALEN); } -- cgit v1.2.3 From 60d62757df30b74bf397a2847a6db7385c6ee281 Mon Sep 17 00:00:00 2001 From: Miri Korenblit Date: Mon, 13 May 2024 13:27:12 +0300 Subject: wifi: iwlwifi: mvm: check n_ssids before accessing the ssids In some versions of cfg80211, the ssids poinet might be a valid one even though n_ssids is 0. Accessing the pointer in this case will cuase an out-of-bound access. Fix this by checking n_ssids first. Fixes: c1a7515393e4 ("iwlwifi: mvm: add adaptive dwell support") Signed-off-by: Miri Korenblit Reviewed-by: Ilan Peer Reviewed-by: Johannes Berg Link: https://msgid.link/20240513132416.6e4d1762bf0d.I5a0e6cc8f02050a766db704d15594c61fe583d45@changeid Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c index 890d4d79b172..9739c38ef824 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c @@ -1313,7 +1313,7 @@ static void iwl_mvm_scan_umac_dwell(struct iwl_mvm *mvm, if (IWL_MVM_ADWELL_MAX_BUDGET) cmd->v7.adwell_max_budget = cpu_to_le16(IWL_MVM_ADWELL_MAX_BUDGET); - else if (params->ssids && params->ssids[0].ssid_len) + else if (params->n_ssids && params->ssids[0].ssid_len) cmd->v7.adwell_max_budget = cpu_to_le16(IWL_SCAN_ADWELL_MAX_BUDGET_DIRECTED_SCAN); else @@ -1418,7 +1418,7 @@ iwl_mvm_scan_umac_dwell_v11(struct iwl_mvm *mvm, if (IWL_MVM_ADWELL_MAX_BUDGET) general_params->adwell_max_budget = cpu_to_le16(IWL_MVM_ADWELL_MAX_BUDGET); - else if (params->ssids && params->ssids[0].ssid_len) + else if (params->n_ssids && params->ssids[0].ssid_len) general_params->adwell_max_budget = cpu_to_le16(IWL_SCAN_ADWELL_MAX_BUDGET_DIRECTED_SCAN); else -- cgit v1.2.3 From e6dd2936ce7ce94a1915b799f8af8193ec628e87 Mon Sep 17 00:00:00 2001 From: Ilan Peer Date: Mon, 13 May 2024 13:27:13 +0300 Subject: wifi: iwlwifi: mvm: Fix scan abort handling with HW rfkill When HW rfkill is toggled to disable the RF, the flow to stop scan is called. When trying to send the command to abort the scan, since HW rfkill is toggled, the command is not sent due to rfkill being asserted, and -ERFKILL is returned from iwl_trans_send_cmd(), but this is silently ignored in iwl_mvm_send_cmd() and thus the scan abort flow continues to wait for scan complete notification and fails. Since it fails, the UID to type mapping is not cleared, and thus a warning is later fired when trying to stop the interface. To fix this, modify the UMAC scan abort flow to force sending the scan abort command even when in rfkill, so stop the FW from accessing the radio etc. Signed-off-by: Ilan Peer Signed-off-by: Miri Korenblit Link: https://msgid.link/20240513132416.8cbe2f8c1a97.Iffe235c12a919dafec88eef399eb1f7bae2c5bdb@changeid Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c index 9739c38ef824..b5f664ae5a17 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c @@ -3322,10 +3322,11 @@ static int iwl_mvm_umac_scan_abort(struct iwl_mvm *mvm, int type) ret = iwl_mvm_send_cmd_pdu(mvm, WIDE_ID(IWL_ALWAYS_LONG_GROUP, SCAN_ABORT_UMAC), - 0, sizeof(cmd), &cmd); + CMD_SEND_IN_RFKILL, sizeof(cmd), &cmd); if (!ret) mvm->scan_uid_status[uid] = type << IWL_MVM_SCAN_STOPPING_SHIFT; + IWL_DEBUG_SCAN(mvm, "Scan abort: ret=%d\n", ret); return ret; } -- cgit v1.2.3 From 4bb95f4535489ed830cf9b34b0a891e384d1aee4 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 13 May 2024 13:27:14 +0300 Subject: wifi: iwlwifi: mvm: don't read past the mfuart notifcation In case the firmware sends a notification that claims it has more data than it has, we will read past that was allocated for the notification. Remove the print of the buffer, we won't see it by default. If needed, we can see the content with tracing. This was reported by KFENCE. Fixes: bdccdb854f2f ("iwlwifi: mvm: support MFUART dump in case of MFUART assert") Signed-off-by: Emmanuel Grumbach Reviewed-by: Johannes Berg Signed-off-by: Miri Korenblit Link: https://msgid.link/20240513132416.ba82a01a559e.Ia91dd20f5e1ca1ad380b95e68aebf2794f553d9b@changeid Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c index ca7fcae6995e..f4937a100cbe 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c @@ -94,20 +94,10 @@ void iwl_mvm_mfu_assert_dump_notif(struct iwl_mvm *mvm, { struct iwl_rx_packet *pkt = rxb_addr(rxb); struct iwl_mfu_assert_dump_notif *mfu_dump_notif = (void *)pkt->data; - __le32 *dump_data = mfu_dump_notif->data; - int n_words = le32_to_cpu(mfu_dump_notif->data_size) / sizeof(__le32); - int i; if (mfu_dump_notif->index_num == 0) IWL_INFO(mvm, "MFUART assert id 0x%x occurred\n", le32_to_cpu(mfu_dump_notif->assert_id)); - - for (i = 0; i < n_words; i++) - IWL_DEBUG_INFO(mvm, - "MFUART assert dump, dword %u: 0x%08x\n", - le16_to_cpu(mfu_dump_notif->index_num) * - n_words + i, - le32_to_cpu(dump_data[i])); } static bool iwl_alive_fn(struct iwl_notif_wait_data *notif_wait, -- cgit v1.2.3 From 2607133196c35f31892ee199ce7ffa717bea4ad1 Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Mon, 27 May 2024 17:14:12 -0700 Subject: clk: sifive: Do not register clkdevs for PRCI clocks These clkdevs were unnecessary, because systems using this driver always look up clocks using the devicetree. And as Russell King points out[1], since the provided device name was truncated, lookups via clkdev would never match. Recently, commit 8d532528ff6a ("clkdev: report over-sized strings when creating clkdev entries") caused clkdev registration to fail due to the truncation, and this now prevents the driver from probing. Fix the driver by removing the clkdev registration. Link: https://lore.kernel.org/linux-clk/ZkfYqj+OcAxd9O2t@shell.armlinux.org.uk/ [1] Fixes: 30b8e27e3b58 ("clk: sifive: add a driver for the SiFive FU540 PRCI IP block") Fixes: 8d532528ff6a ("clkdev: report over-sized strings when creating clkdev entries") Reported-by: Guenter Roeck Closes: https://lore.kernel.org/linux-clk/7eda7621-0dde-4153-89e4-172e4c095d01@roeck-us.net/ Suggested-by: Russell King Signed-off-by: Samuel Holland Link: https://lore.kernel.org/r/20240528001432.1200403-1-samuel.holland@sifive.com Signed-off-by: Stephen Boyd --- drivers/clk/sifive/sifive-prci.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/sifive/sifive-prci.c b/drivers/clk/sifive/sifive-prci.c index 25b8e1a80ddc..b32a59fe55e7 100644 --- a/drivers/clk/sifive/sifive-prci.c +++ b/drivers/clk/sifive/sifive-prci.c @@ -4,7 +4,6 @@ * Copyright (C) 2020 Zong Li */ -#include #include #include #include @@ -537,13 +536,6 @@ static int __prci_register_clocks(struct device *dev, struct __prci_data *pd, return r; } - r = clk_hw_register_clkdev(&pic->hw, pic->name, dev_name(dev)); - if (r) { - dev_warn(dev, "Failed to register clkdev for %s: %d\n", - init.name, r); - return r; - } - pd->hw_clks.hws[i] = &pic->hw; } -- cgit v1.2.3 From 328af04b1ac279f17c09ddd5958aa6ec47131c80 Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Mon, 27 May 2024 23:43:38 +0300 Subject: media: mei: csi: Put the IPU device reference The mei csi's probe function obtains a reference to the IPU device but never puts that reference. Do that now. Fixes: 33116eb12c6b ("media: ivsc: csi: Use IPU bridge") Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil --- drivers/media/pci/intel/ivsc/mei_csi.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/pci/intel/ivsc/mei_csi.c b/drivers/media/pci/intel/ivsc/mei_csi.c index 89b582a221ab..53151d016188 100644 --- a/drivers/media/pci/intel/ivsc/mei_csi.c +++ b/drivers/media/pci/intel/ivsc/mei_csi.c @@ -677,6 +677,7 @@ static int mei_csi_probe(struct mei_cl_device *cldev, return -ENODEV; ret = ipu_bridge_init(&ipu->dev, ipu_bridge_parse_ssdb); + put_device(&ipu->dev); if (ret < 0) return ret; if (WARN_ON(!dev_fwnode(dev))) -- cgit v1.2.3 From cc864821c7e8b921ebbfb21b17c92f8b3ea3d7ff Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Mon, 27 May 2024 23:13:27 +0300 Subject: media: mei: csi: Warn less verbosely of a missing device fwnode The check for having device fwnode was meant to be a sanity check but this also happens if the ACPI DSDT has graph port nodes on sensor device(s) but not on the IVSC device. Use a more meaningful warning message to tell about this. Fixes: 33116eb12c6b ("media: ivsc: csi: Use IPU bridge") Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil --- drivers/media/pci/intel/ivsc/mei_csi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/pci/intel/ivsc/mei_csi.c b/drivers/media/pci/intel/ivsc/mei_csi.c index 53151d016188..f04a89584334 100644 --- a/drivers/media/pci/intel/ivsc/mei_csi.c +++ b/drivers/media/pci/intel/ivsc/mei_csi.c @@ -680,8 +680,10 @@ static int mei_csi_probe(struct mei_cl_device *cldev, put_device(&ipu->dev); if (ret < 0) return ret; - if (WARN_ON(!dev_fwnode(dev))) + if (!dev_fwnode(dev)) { + dev_err(dev, "mei-csi probed without device fwnode!\n"); return -ENXIO; + } csi = devm_kzalloc(dev, sizeof(struct mei_csi), GFP_KERNEL); if (!csi) -- cgit v1.2.3 From 54880795b494e6557b47fe3cf3f21f2f54c2aa68 Mon Sep 17 00:00:00 2001 From: Bingbu Cao Date: Wed, 29 May 2024 11:44:32 +0800 Subject: media: intel/ipu6: update the maximum supported csi2 port number to 6 IPU6EP on Meteor Lake SoC supports maximum 6 csi2 ports instead of 4. Fixes: 25fedc021985 ("media: intel/ipu6: add Intel IPU6 PCI device driver") Signed-off-by: Bingbu Cao Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil --- drivers/media/pci/intel/ipu6/ipu6.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/pci/intel/ipu6/ipu6.c b/drivers/media/pci/intel/ipu6/ipu6.c index f587f609259d..bbd646378ab3 100644 --- a/drivers/media/pci/intel/ipu6/ipu6.c +++ b/drivers/media/pci/intel/ipu6/ipu6.c @@ -285,7 +285,7 @@ EXPORT_SYMBOL_NS_GPL(ipu6_configure_spc, INTEL_IPU6); #define IPU6_ISYS_CSI2_NPORTS 4 #define IPU6SE_ISYS_CSI2_NPORTS 4 #define IPU6_TGL_ISYS_CSI2_NPORTS 8 -#define IPU6EP_MTL_ISYS_CSI2_NPORTS 4 +#define IPU6EP_MTL_ISYS_CSI2_NPORTS 6 static void ipu6_internal_pdata_init(struct ipu6_device *isp) { -- cgit v1.2.3 From ffb9072bce200a4d004006e8b40c366933cf517b Mon Sep 17 00:00:00 2001 From: Bingbu Cao Date: Wed, 29 May 2024 14:43:21 +0800 Subject: media: intel/ipu6: add csi2 port sanity check in notifier bound Invalid csi2 port will break the isys notifier bound ops as it is trying to access an invalid csi2 sub-device instance based on the port. It will trigger a mc warning, and it will cause the sensor driver to unbound an inexistent isys csi2 and crash. Adding a csi2 port sanity check, return error to avoid such case. Fixes: f50c4ca0a820 ("media: intel/ipu6: add the main input system driver") Signed-off-by: Bingbu Cao [Sakari Ailus: Fix spelling of "nports" field.] Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil --- drivers/media/pci/intel/ipu6/ipu6-isys.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/media/pci/intel/ipu6/ipu6-isys.c b/drivers/media/pci/intel/ipu6/ipu6-isys.c index 1998b72ac07d..8b9b77719bb1 100644 --- a/drivers/media/pci/intel/ipu6/ipu6-isys.c +++ b/drivers/media/pci/intel/ipu6/ipu6-isys.c @@ -678,6 +678,12 @@ static int isys_notifier_bound(struct v4l2_async_notifier *notifier, container_of(asc, struct sensor_async_sd, asc); int ret; + if (s_asd->csi2.port >= isys->pdata->ipdata->csi2.nports) { + dev_err(&isys->adev->auxdev.dev, "invalid csi2 port %u\n", + s_asd->csi2.port); + return -EINVAL; + } + ret = ipu_bridge_instantiate_vcm(sd->dev); if (ret) { dev_err(&isys->adev->auxdev.dev, "instantiate vcm failed\n"); -- cgit v1.2.3 From d53b681ce9ca7db5ef4ecb8d2cf465ae4a031264 Mon Sep 17 00:00:00 2001 From: Chanwoo Lee Date: Fri, 24 May 2024 10:59:04 +0900 Subject: scsi: ufs: mcq: Fix error output and clean up ufshcd_mcq_abort() An error unrelated to ufshcd_try_to_abort_task is being logged and can cause confusion. Modify ufshcd_mcq_abort() to print the result of the abort failure. For readability, return immediately instead of 'goto'. Fixes: f1304d442077 ("scsi: ufs: mcq: Added ufshcd_mcq_abort()") Signed-off-by: Chanwoo Lee Link: https://lore.kernel.org/r/20240524015904.1116005-1-cw9316.lee@samsung.com Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/ufs/core/ufs-mcq.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/ufs/core/ufs-mcq.c b/drivers/ufs/core/ufs-mcq.c index 005d63ab1f44..8944548c30fa 100644 --- a/drivers/ufs/core/ufs-mcq.c +++ b/drivers/ufs/core/ufs-mcq.c @@ -634,20 +634,20 @@ int ufshcd_mcq_abort(struct scsi_cmnd *cmd) struct ufshcd_lrb *lrbp = &hba->lrb[tag]; struct ufs_hw_queue *hwq; unsigned long flags; - int err = FAILED; + int err; if (!ufshcd_cmd_inflight(lrbp->cmd)) { dev_err(hba->dev, "%s: skip abort. cmd at tag %d already completed.\n", __func__, tag); - goto out; + return FAILED; } /* Skip task abort in case previous aborts failed and report failure */ if (lrbp->req_abort_skip) { dev_err(hba->dev, "%s: skip abort. tag %d failed earlier\n", __func__, tag); - goto out; + return FAILED; } hwq = ufshcd_mcq_req_to_hwq(hba, scsi_cmd_to_rq(cmd)); @@ -659,7 +659,7 @@ int ufshcd_mcq_abort(struct scsi_cmnd *cmd) */ dev_err(hba->dev, "%s: cmd found in sq. hwq=%d, tag=%d\n", __func__, hwq->id, tag); - goto out; + return FAILED; } /* @@ -667,18 +667,17 @@ int ufshcd_mcq_abort(struct scsi_cmnd *cmd) * in the completion queue either. Query the device to see if * the command is being processed in the device. */ - if (ufshcd_try_to_abort_task(hba, tag)) { + err = ufshcd_try_to_abort_task(hba, tag); + if (err) { dev_err(hba->dev, "%s: device abort failed %d\n", __func__, err); lrbp->req_abort_skip = true; - goto out; + return FAILED; } - err = SUCCESS; spin_lock_irqsave(&hwq->cq_lock, flags); if (ufshcd_cmd_inflight(lrbp->cmd)) ufshcd_release_scsi_cmd(hba, lrbp); spin_unlock_irqrestore(&hwq->cq_lock, flags); -out: - return err; + return SUCCESS; } -- cgit v1.2.3 From 935df1bd40d43c4ee91838c42a20e9af751885cc Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Wed, 29 May 2024 14:59:20 -0500 Subject: of/irq: Factor out parsing of interrupt-map parent phandle+args from of_irq_parse_raw() Factor out the parsing of interrupt-map interrupt parent phandle and its arg cells to a separate function, of_irq_parse_imap_parent(), so that it can be used in other parsing scenarios (e.g. fw_devlink). There was a refcount leak on non-matching entries when iterating thru "interrupt-map" which is fixed. Tested-by: Marc Zyngier Tested-by: Anup Patel Link: https://lore.kernel.org/r/20240529-dt-interrupt-map-fix-v2-1-ef86dc5bcd2a@kernel.org Signed-off-by: Rob Herring (Arm) --- drivers/of/irq.c | 125 ++++++++++++++++++++++++++++-------------------- drivers/of/of_private.h | 3 ++ 2 files changed, 77 insertions(+), 51 deletions(-) (limited to 'drivers') diff --git a/drivers/of/irq.c b/drivers/of/irq.c index 174900072c18..462375b293e4 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -25,6 +25,8 @@ #include #include +#include "of_private.h" + /** * irq_of_parse_and_map - Parse and map an interrupt into linux virq space * @dev: Device node of the device whose interrupt is to be mapped @@ -96,6 +98,57 @@ static const char * const of_irq_imap_abusers[] = { NULL, }; +const __be32 *of_irq_parse_imap_parent(const __be32 *imap, int len, struct of_phandle_args *out_irq) +{ + u32 intsize, addrsize; + struct device_node *np; + + /* Get the interrupt parent */ + if (of_irq_workarounds & OF_IMAP_NO_PHANDLE) + np = of_node_get(of_irq_dflt_pic); + else + np = of_find_node_by_phandle(be32_to_cpup(imap)); + imap++; + + /* Check if not found */ + if (!np) { + pr_debug(" -> imap parent not found !\n"); + return NULL; + } + + /* Get #interrupt-cells and #address-cells of new parent */ + if (of_property_read_u32(np, "#interrupt-cells", + &intsize)) { + pr_debug(" -> parent lacks #interrupt-cells!\n"); + of_node_put(np); + return NULL; + } + if (of_property_read_u32(np, "#address-cells", + &addrsize)) + addrsize = 0; + + pr_debug(" -> intsize=%d, addrsize=%d\n", + intsize, addrsize); + + /* Check for malformed properties */ + if (WARN_ON(addrsize + intsize > MAX_PHANDLE_ARGS) + || (len < (addrsize + intsize))) { + of_node_put(np); + return NULL; + } + + pr_debug(" -> imaplen=%d\n", len); + + imap += addrsize + intsize; + + out_irq->np = np; + for (int i = 0; i < intsize; i++) + out_irq->args[i] = be32_to_cpup(imap - intsize + i); + out_irq->args_count = intsize; + + return imap; +} + /** * of_irq_parse_raw - Low level interrupt tree parsing * @addr: address specifier (start of "reg" property of the device) in be32 format @@ -112,12 +165,12 @@ static const char * const of_irq_imap_abusers[] = { */ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq) { - struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL; + struct device_node *ipar, *tnode, *old = NULL; __be32 initial_match_array[MAX_PHANDLE_ARGS]; const __be32 *match_array = initial_match_array; - const __be32 *tmp, *imap, *imask, dummy_imask[] = { [0 ... MAX_PHANDLE_ARGS] = cpu_to_be32(~0) }; - u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0; - int imaplen, match, i, rc = -EINVAL; + const __be32 *tmp, dummy_imask[] = { [0 ... MAX_PHANDLE_ARGS] = cpu_to_be32(~0) }; + u32 intsize = 1, addrsize; + int i, rc = -EINVAL; #ifdef DEBUG of_print_phandle_args("of_irq_parse_raw: ", out_irq); @@ -176,6 +229,9 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq) /* Now start the actual "proper" walk of the interrupt tree */ while (ipar != NULL) { + int imaplen, match; + const __be32 *imap, *oldimap, *imask; + struct device_node *newpar; /* * Now check if cursor is an interrupt-controller and * if it is then we are done, unless there is an @@ -216,7 +272,7 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq) /* Parse interrupt-map */ match = 0; - while (imaplen > (addrsize + intsize + 1) && !match) { + while (imaplen > (addrsize + intsize + 1)) { /* Compare specifiers */ match = 1; for (i = 0; i < (addrsize + intsize); i++, imaplen--) @@ -224,48 +280,17 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq) pr_debug(" -> match=%d (imaplen=%d)\n", match, imaplen); - /* Get the interrupt parent */ - if (of_irq_workarounds & OF_IMAP_NO_PHANDLE) - newpar = of_node_get(of_irq_dflt_pic); - else - newpar = of_find_node_by_phandle(be32_to_cpup(imap)); - imap++; - --imaplen; - - /* Check if not found */ - if (newpar == NULL) { - pr_debug(" -> imap parent not found !\n"); - goto fail; - } - - if (!of_device_is_available(newpar)) - match = 0; - - /* Get #interrupt-cells and #address-cells of new - * parent - */ - if (of_property_read_u32(newpar, "#interrupt-cells", - &newintsize)) { - pr_debug(" -> parent lacks #interrupt-cells!\n"); - goto fail; - } - if (of_property_read_u32(newpar, "#address-cells", - &newaddrsize)) - newaddrsize = 0; - - pr_debug(" -> newintsize=%d, newaddrsize=%d\n", - newintsize, newaddrsize); - - /* Check for malformed properties */ - if (WARN_ON(newaddrsize + newintsize > MAX_PHANDLE_ARGS) - || (imaplen < (newaddrsize + newintsize))) { - rc = -EFAULT; + oldimap = imap; + imap = of_irq_parse_imap_parent(oldimap, imaplen, out_irq); + if (!imap) goto fail; - } - imap += newaddrsize + newintsize; - imaplen -= newaddrsize + newintsize; + match &= of_device_is_available(out_irq->np); + if (match) + break; + of_node_put(out_irq->np); + imaplen -= imap - oldimap; pr_debug(" -> imaplen=%d\n", imaplen); } if (!match) { @@ -287,11 +312,11 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq) * Successfully parsed an interrupt-map translation; copy new * interrupt specifier into the out_irq structure */ - match_array = imap - newaddrsize - newintsize; - for (i = 0; i < newintsize; i++) - out_irq->args[i] = be32_to_cpup(imap - newintsize + i); - out_irq->args_count = intsize = newintsize; - addrsize = newaddrsize; + match_array = oldimap + 1; + + newpar = out_irq->np; + intsize = out_irq->args_count; + addrsize = (imap - match_array) - intsize; if (ipar == newpar) { pr_debug("%pOF interrupt-map entry to self\n", ipar); @@ -300,7 +325,6 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq) skiplevel: /* Iterate again with new parent */ - out_irq->np = newpar; pr_debug(" -> new parent: %pOF\n", newpar); of_node_put(ipar); ipar = newpar; @@ -310,7 +334,6 @@ int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq) fail: of_node_put(ipar); - of_node_put(newpar); return rc; } diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h index 94fc0aa07af9..04aa2a91f851 100644 --- a/drivers/of/of_private.h +++ b/drivers/of/of_private.h @@ -159,6 +159,9 @@ extern void __of_sysfs_remove_bin_file(struct device_node *np, extern int of_bus_n_addr_cells(struct device_node *np); extern int of_bus_n_size_cells(struct device_node *np); +const __be32 *of_irq_parse_imap_parent(const __be32 *imap, int len, + struct of_phandle_args *out_irq); + struct bus_dma_region; #if defined(CONFIG_OF_ADDRESS) && defined(CONFIG_HAS_DMA) int of_dma_get_range(struct device_node *np, -- cgit v1.2.3 From e7985f43609c782132f8f5794ee6cc4cdb66ca75 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 29 May 2024 14:59:21 -0500 Subject: of: property: Fix fw_devlink handling of interrupt-map Commit d976c6f4b32c ("of: property: Add fw_devlink support for interrupt-map property") tried to do what it says on the tin, but failed on a couple of points: - it confuses bytes and cells. Not a huge deal, except when it comes to pointer arithmetic - it doesn't really handle anything but interrupt-maps that have their parent #address-cells set to 0 The combinations of the two leads to some serious fun on my M1 box, with plenty of WARN-ON() firing all over the shop, and amusing values being generated for interrupt specifiers. Having 2 versions of parsing code for "interrupt-map" was a bad idea. Now that the common parsing parts have been refactored into of_irq_parse_imap_parent(), rework the code here to use it instead and fix the pointer arithmetic. Note that the dependency will be a bit different than the original code when the interrupt-map points to another interrupt-map. In this case, the original code would resolve to the final interrupt controller. Now the dependency is the parent interrupt-map (which itself should have a dependency to the parent). It is possible that a node with an interrupt-map has no driver. Fixes: d976c6f4b32c ("of: property: Add fw_devlink support for interrupt-map property") Signed-off-by: Marc Zyngier Co-developed-by: Rob Herring (Arm) Cc: Saravana Kannan Tested-by: Marc Zyngier Tested-by: Anup Patel Link: https://lore.kernel.org/r/20240529-dt-interrupt-map-fix-v2-2-ef86dc5bcd2a@kernel.org Signed-off-by: Rob Herring (Arm) --- drivers/of/property.c | 30 ++++++++++-------------------- 1 file changed, 10 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/of/property.c b/drivers/of/property.c index 1c83e68f805b..164d77cb9445 100644 --- a/drivers/of/property.c +++ b/drivers/of/property.c @@ -1306,10 +1306,10 @@ static struct device_node *parse_interrupts(struct device_node *np, static struct device_node *parse_interrupt_map(struct device_node *np, const char *prop_name, int index) { - const __be32 *imap, *imap_end, *addr; + const __be32 *imap, *imap_end; struct of_phandle_args sup_args; u32 addrcells, intcells; - int i, imaplen; + int imaplen; if (!IS_ENABLED(CONFIG_OF_IRQ)) return NULL; @@ -1322,33 +1322,23 @@ static struct device_node *parse_interrupt_map(struct device_node *np, addrcells = of_bus_n_addr_cells(np); imap = of_get_property(np, "interrupt-map", &imaplen); - if (!imap || imaplen <= (addrcells + intcells)) + imaplen /= sizeof(*imap); + if (!imap) return NULL; - imap_end = imap + imaplen; - while (imap < imap_end) { - addr = imap; - imap += addrcells; + imap_end = imap + imaplen; - sup_args.np = np; - sup_args.args_count = intcells; - for (i = 0; i < intcells; i++) - sup_args.args[i] = be32_to_cpu(imap[i]); - imap += intcells; + for (int i = 0; imap + addrcells + intcells + 1 < imap_end; i++) { + imap += addrcells + intcells; - /* - * Upon success, the function of_irq_parse_raw() returns - * interrupt controller DT node pointer in sup_args.np. - */ - if (of_irq_parse_raw(addr, &sup_args)) + imap = of_irq_parse_imap_parent(imap, imap_end - imap, &sup_args); + if (!imap) return NULL; - if (!index) + if (i == index) return sup_args.np; of_node_put(sup_args.np); - imap += sup_args.args_count + 1; - index--; } return NULL; -- cgit v1.2.3 From 985cfe501b74f214905ab4817acee0df24627268 Mon Sep 17 00:00:00 2001 From: Aapo Vienamo Date: Fri, 24 May 2024 18:53:17 +0300 Subject: thunderbolt: debugfs: Fix margin debugfs node creation condition The margin debugfs node controls the "Enable Margin Test" field of the lane margining operations. This field selects between either low or high voltage margin values for voltage margin test or left or right timing margin values for timing margin test. According to the USB4 specification, whether or not the "Enable Margin Test" control applies, depends on the values of the "Independent High/Low Voltage Margin" or "Independent Left/Right Timing Margin" capability fields for voltage and timing margin tests respectively. The pre-existing condition enabled the debugfs node also in the case where both low/high or left/right margins are returned, which is incorrect. This change only enables the debugfs node in question, if the specific required capability values are met. Signed-off-by: Aapo Vienamo Fixes: d0f1e0c2a699 ("thunderbolt: Add support for receiver lane margining") Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg --- drivers/thunderbolt/debugfs.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/thunderbolt/debugfs.c b/drivers/thunderbolt/debugfs.c index 193e9dfc983b..70b52aac3d97 100644 --- a/drivers/thunderbolt/debugfs.c +++ b/drivers/thunderbolt/debugfs.c @@ -943,8 +943,9 @@ static void margining_port_init(struct tb_port *port) debugfs_create_file("run", 0600, dir, port, &margining_run_fops); debugfs_create_file("results", 0600, dir, port, &margining_results_fops); debugfs_create_file("test", 0600, dir, port, &margining_test_fops); - if (independent_voltage_margins(usb4) || - (supports_time(usb4) && independent_time_margins(usb4))) + if (independent_voltage_margins(usb4) == USB4_MARGIN_CAP_0_VOLTAGE_HL || + (supports_time(usb4) && + independent_time_margins(usb4) == USB4_MARGIN_CAP_1_TIME_LR)) debugfs_create_file("margin", 0600, dir, port, &margining_margin_fops); } -- cgit v1.2.3 From 539d33b5783804f22a62bd62ff463dfd1cef4265 Mon Sep 17 00:00:00 2001 From: "Dr. David Alan Gilbert" Date: Thu, 16 May 2024 14:37:24 +0100 Subject: drm/komeda: remove unused struct 'gamma_curve_segment' 'gamma_curve_segment' looks like it has never been used. Remove it. Signed-off-by: Dr. David Alan Gilbert Reviewed-by: Dmitry Baryshkov Acked-by: Liviu Dudau Link: https://patchwork.freedesktop.org/patch/msgid/20240516133724.251750-1-linux@treblig.org Signed-off-by: Liviu Dudau --- drivers/gpu/drm/arm/display/komeda/komeda_color_mgmt.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_color_mgmt.c b/drivers/gpu/drm/arm/display/komeda/komeda_color_mgmt.c index d8e449e6ebda..50cb8f7ee6b2 100644 --- a/drivers/gpu/drm/arm/display/komeda/komeda_color_mgmt.c +++ b/drivers/gpu/drm/arm/display/komeda/komeda_color_mgmt.c @@ -72,11 +72,6 @@ struct gamma_curve_sector { u32 segment_width; }; -struct gamma_curve_segment { - u32 start; - u32 end; -}; - static struct gamma_curve_sector sector_tbl[] = { { 0, 4, 4 }, { 16, 4, 4 }, -- cgit v1.2.3 From 7dc3bfcb4c9cc58970fff6aaa48172cb224d85aa Mon Sep 17 00:00:00 2001 From: Chunguang Xu Date: Fri, 31 May 2024 17:24:21 +0800 Subject: nvme-fabrics: use reserved tag for reg read/write command In some scenarios, if too many commands are issued by nvme command in the same time by user tasks, this may exhaust all tags of admin_q. If a reset (nvme reset or IO timeout) occurs before these commands finish, reconnect routine may fail to update nvme regs due to insufficient tags, which will cause kernel hang forever. In order to workaround this issue, maybe we can let reg_read32()/reg_read64()/reg_write32() use reserved tags. This maybe safe for nvmf: 1. For the disable ctrl path, we will not issue connect command 2. For the enable ctrl / fw activate path, since connect and reg_xx() are called serially. So the reserved tags may still be enough while reg_xx() use reserved tags. Signed-off-by: Chunguang Xu Reviewed-by: Sagi Grimberg Reviewed-by: Chaitanya Kulkarni Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch --- drivers/nvme/host/fabrics.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/host/fabrics.c b/drivers/nvme/host/fabrics.c index c6ad2148c2e0..ceb9c0ed3120 100644 --- a/drivers/nvme/host/fabrics.c +++ b/drivers/nvme/host/fabrics.c @@ -180,7 +180,7 @@ int nvmf_reg_read32(struct nvme_ctrl *ctrl, u32 off, u32 *val) cmd.prop_get.offset = cpu_to_le32(off); ret = __nvme_submit_sync_cmd(ctrl->fabrics_q, &cmd, &res, NULL, 0, - NVME_QID_ANY, 0); + NVME_QID_ANY, NVME_SUBMIT_RESERVED); if (ret >= 0) *val = le64_to_cpu(res.u64); @@ -226,7 +226,7 @@ int nvmf_reg_read64(struct nvme_ctrl *ctrl, u32 off, u64 *val) cmd.prop_get.offset = cpu_to_le32(off); ret = __nvme_submit_sync_cmd(ctrl->fabrics_q, &cmd, &res, NULL, 0, - NVME_QID_ANY, 0); + NVME_QID_ANY, NVME_SUBMIT_RESERVED); if (ret >= 0) *val = le64_to_cpu(res.u64); @@ -271,7 +271,7 @@ int nvmf_reg_write32(struct nvme_ctrl *ctrl, u32 off, u32 val) cmd.prop_set.value = cpu_to_le64(val); ret = __nvme_submit_sync_cmd(ctrl->fabrics_q, &cmd, NULL, NULL, 0, - NVME_QID_ANY, 0); + NVME_QID_ANY, NVME_SUBMIT_RESERVED); if (unlikely(ret)) dev_err(ctrl->device, "Property Set error: %d, offset %#x\n", -- cgit v1.2.3 From b1a1fdd7096dd2d67911b07f8118ff113d815db4 Mon Sep 17 00:00:00 2001 From: Weiwen Hu Date: Thu, 30 May 2024 14:16:46 +0800 Subject: nvme: fix nvme_pr_* status code parsing Fix the parsing if extra status bits (e.g. MORE) is present. Fixes: 7fb42780d06c ("nvme: Convert NVMe errors to PR errors") Signed-off-by: Weiwen Hu Signed-off-by: Keith Busch --- drivers/nvme/host/pr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nvme/host/pr.c b/drivers/nvme/host/pr.c index e05571b2a1b0..8fa1ffcdaed4 100644 --- a/drivers/nvme/host/pr.c +++ b/drivers/nvme/host/pr.c @@ -77,7 +77,7 @@ static int nvme_sc_to_pr_err(int nvme_sc) if (nvme_is_path_error(nvme_sc)) return PR_STS_PATH_FAILED; - switch (nvme_sc) { + switch (nvme_sc & 0x7ff) { case NVME_SC_SUCCESS: return PR_STS_SUCCESS; case NVME_SC_RESERVATION_CONFLICT: -- cgit v1.2.3 From b7c5e64fecfa88764791679cca4786ac65de739e Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Wed, 29 May 2024 22:52:30 -0600 Subject: vfio: Create vfio_fs_type with inode per device By linking all the device fds we provide to userspace to an address space through a new pseudo fs, we can use tools like unmap_mapping_range() to zap all vmas associated with a device. Suggested-by: Jason Gunthorpe Reviewed-by: Jason Gunthorpe Reviewed-by: Kevin Tian Link: https://lore.kernel.org/r/20240530045236.1005864-2-alex.williamson@redhat.com Signed-off-by: Alex Williamson --- drivers/vfio/device_cdev.c | 7 +++++++ drivers/vfio/group.c | 7 +++++++ drivers/vfio/vfio_main.c | 44 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/vfio.h | 1 + 4 files changed, 59 insertions(+) (limited to 'drivers') diff --git a/drivers/vfio/device_cdev.c b/drivers/vfio/device_cdev.c index e75da0a70d1f..bb1817bd4ff3 100644 --- a/drivers/vfio/device_cdev.c +++ b/drivers/vfio/device_cdev.c @@ -39,6 +39,13 @@ int vfio_device_fops_cdev_open(struct inode *inode, struct file *filep) filep->private_data = df; + /* + * Use the pseudo fs inode on the device to link all mmaps + * to the same address space, allowing us to unmap all vmas + * associated to this device using unmap_mapping_range(). + */ + filep->f_mapping = device->inode->i_mapping; + return 0; err_put_registration: diff --git a/drivers/vfio/group.c b/drivers/vfio/group.c index 610a429c6191..ded364588d29 100644 --- a/drivers/vfio/group.c +++ b/drivers/vfio/group.c @@ -286,6 +286,13 @@ static struct file *vfio_device_open_file(struct vfio_device *device) */ filep->f_mode |= (FMODE_PREAD | FMODE_PWRITE); + /* + * Use the pseudo fs inode on the device to link all mmaps + * to the same address space, allowing us to unmap all vmas + * associated to this device using unmap_mapping_range(). + */ + filep->f_mapping = device->inode->i_mapping; + if (device->group->type == VFIO_NO_IOMMU) dev_warn(device->dev, "vfio-noiommu device opened by user " "(%s:%d)\n", current->comm, task_pid_nr(current)); diff --git a/drivers/vfio/vfio_main.c b/drivers/vfio/vfio_main.c index e97d796a54fb..a5a62d9d963f 100644 --- a/drivers/vfio/vfio_main.c +++ b/drivers/vfio/vfio_main.c @@ -22,8 +22,10 @@ #include #include #include +#include #include #include +#include #include #include #include @@ -43,9 +45,13 @@ #define DRIVER_AUTHOR "Alex Williamson " #define DRIVER_DESC "VFIO - User Level meta-driver" +#define VFIO_MAGIC 0x5646494f /* "VFIO" */ + static struct vfio { struct class *device_class; struct ida device_ida; + struct vfsmount *vfs_mount; + int fs_count; } vfio; #ifdef CONFIG_VFIO_NOIOMMU @@ -186,6 +192,8 @@ static void vfio_device_release(struct device *dev) if (device->ops->release) device->ops->release(device); + iput(device->inode); + simple_release_fs(&vfio.vfs_mount, &vfio.fs_count); kvfree(device); } @@ -228,6 +236,34 @@ out_free: } EXPORT_SYMBOL_GPL(_vfio_alloc_device); +static int vfio_fs_init_fs_context(struct fs_context *fc) +{ + return init_pseudo(fc, VFIO_MAGIC) ? 0 : -ENOMEM; +} + +static struct file_system_type vfio_fs_type = { + .name = "vfio", + .owner = THIS_MODULE, + .init_fs_context = vfio_fs_init_fs_context, + .kill_sb = kill_anon_super, +}; + +static struct inode *vfio_fs_inode_new(void) +{ + struct inode *inode; + int ret; + + ret = simple_pin_fs(&vfio_fs_type, &vfio.vfs_mount, &vfio.fs_count); + if (ret) + return ERR_PTR(ret); + + inode = alloc_anon_inode(vfio.vfs_mount->mnt_sb); + if (IS_ERR(inode)) + simple_release_fs(&vfio.vfs_mount, &vfio.fs_count); + + return inode; +} + /* * Initialize a vfio_device so it can be registered to vfio core. */ @@ -246,6 +282,11 @@ static int vfio_init_device(struct vfio_device *device, struct device *dev, init_completion(&device->comp); device->dev = dev; device->ops = ops; + device->inode = vfio_fs_inode_new(); + if (IS_ERR(device->inode)) { + ret = PTR_ERR(device->inode); + goto out_inode; + } if (ops->init) { ret = ops->init(device); @@ -260,6 +301,9 @@ static int vfio_init_device(struct vfio_device *device, struct device *dev, return 0; out_uninit: + iput(device->inode); + simple_release_fs(&vfio.vfs_mount, &vfio.fs_count); +out_inode: vfio_release_device_set(device); ida_free(&vfio.device_ida, device->index); return ret; diff --git a/include/linux/vfio.h b/include/linux/vfio.h index 8b1a29820409..000a6cab2d31 100644 --- a/include/linux/vfio.h +++ b/include/linux/vfio.h @@ -64,6 +64,7 @@ struct vfio_device { struct completion comp; struct iommufd_access *iommufd_access; void (*put_kvm)(struct kvm *kvm); + struct inode *inode; #if IS_ENABLED(CONFIG_IOMMUFD) struct iommufd_device *iommufd_device; u8 iommufd_attached:1; -- cgit v1.2.3 From aac6db75a9fc2c7a6f73e152df8f15101dda38e6 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Wed, 29 May 2024 22:52:31 -0600 Subject: vfio/pci: Use unmap_mapping_range() With the vfio device fd tied to the address space of the pseudo fs inode, we can use the mm to track all vmas that might be mmap'ing device BARs, which removes our vma_list and all the complicated lock ordering necessary to manually zap each related vma. Note that we can no longer store the pfn in vm_pgoff if we want to use unmap_mapping_range() to zap a selective portion of the device fd corresponding to BAR mappings. This also converts our mmap fault handler to use vmf_insert_pfn() because we no longer have a vma_list to avoid the concurrency problem with io_remap_pfn_range(). The goal is to eventually use the vm_ops huge_fault handler to avoid the additional faulting overhead, but vmf_insert_pfn_{pmd,pud}() need to learn about pfnmaps first. Also, Jason notes that a race exists between unmap_mapping_range() and the fops mmap callback if we were to call io_remap_pfn_range() to populate the vma on mmap. Specifically, mmap_region() does call_mmap() before it does vma_link_file() which gives a window where the vma is populated but invisible to unmap_mapping_range(). Suggested-by: Jason Gunthorpe Reviewed-by: Jason Gunthorpe Reviewed-by: Kevin Tian Link: https://lore.kernel.org/r/20240530045236.1005864-3-alex.williamson@redhat.com Signed-off-by: Alex Williamson --- drivers/vfio/pci/vfio_pci_core.c | 264 ++++++++------------------------------- include/linux/vfio_pci_core.h | 2 - 2 files changed, 55 insertions(+), 211 deletions(-) (limited to 'drivers') diff --git a/drivers/vfio/pci/vfio_pci_core.c b/drivers/vfio/pci/vfio_pci_core.c index 80cae87fff36..db31c27bf78b 100644 --- a/drivers/vfio/pci/vfio_pci_core.c +++ b/drivers/vfio/pci/vfio_pci_core.c @@ -1610,100 +1610,20 @@ ssize_t vfio_pci_core_write(struct vfio_device *core_vdev, const char __user *bu } EXPORT_SYMBOL_GPL(vfio_pci_core_write); -/* Return 1 on zap and vma_lock acquired, 0 on contention (only with @try) */ -static int vfio_pci_zap_and_vma_lock(struct vfio_pci_core_device *vdev, bool try) +static void vfio_pci_zap_bars(struct vfio_pci_core_device *vdev) { - struct vfio_pci_mmap_vma *mmap_vma, *tmp; + struct vfio_device *core_vdev = &vdev->vdev; + loff_t start = VFIO_PCI_INDEX_TO_OFFSET(VFIO_PCI_BAR0_REGION_INDEX); + loff_t end = VFIO_PCI_INDEX_TO_OFFSET(VFIO_PCI_ROM_REGION_INDEX); + loff_t len = end - start; - /* - * Lock ordering: - * vma_lock is nested under mmap_lock for vm_ops callback paths. - * The memory_lock semaphore is used by both code paths calling - * into this function to zap vmas and the vm_ops.fault callback - * to protect the memory enable state of the device. - * - * When zapping vmas we need to maintain the mmap_lock => vma_lock - * ordering, which requires using vma_lock to walk vma_list to - * acquire an mm, then dropping vma_lock to get the mmap_lock and - * reacquiring vma_lock. This logic is derived from similar - * requirements in uverbs_user_mmap_disassociate(). - * - * mmap_lock must always be the top-level lock when it is taken. - * Therefore we can only hold the memory_lock write lock when - * vma_list is empty, as we'd need to take mmap_lock to clear - * entries. vma_list can only be guaranteed empty when holding - * vma_lock, thus memory_lock is nested under vma_lock. - * - * This enables the vm_ops.fault callback to acquire vma_lock, - * followed by memory_lock read lock, while already holding - * mmap_lock without risk of deadlock. - */ - while (1) { - struct mm_struct *mm = NULL; - - if (try) { - if (!mutex_trylock(&vdev->vma_lock)) - return 0; - } else { - mutex_lock(&vdev->vma_lock); - } - while (!list_empty(&vdev->vma_list)) { - mmap_vma = list_first_entry(&vdev->vma_list, - struct vfio_pci_mmap_vma, - vma_next); - mm = mmap_vma->vma->vm_mm; - if (mmget_not_zero(mm)) - break; - - list_del(&mmap_vma->vma_next); - kfree(mmap_vma); - mm = NULL; - } - if (!mm) - return 1; - mutex_unlock(&vdev->vma_lock); - - if (try) { - if (!mmap_read_trylock(mm)) { - mmput(mm); - return 0; - } - } else { - mmap_read_lock(mm); - } - if (try) { - if (!mutex_trylock(&vdev->vma_lock)) { - mmap_read_unlock(mm); - mmput(mm); - return 0; - } - } else { - mutex_lock(&vdev->vma_lock); - } - list_for_each_entry_safe(mmap_vma, tmp, - &vdev->vma_list, vma_next) { - struct vm_area_struct *vma = mmap_vma->vma; - - if (vma->vm_mm != mm) - continue; - - list_del(&mmap_vma->vma_next); - kfree(mmap_vma); - - zap_vma_ptes(vma, vma->vm_start, - vma->vm_end - vma->vm_start); - } - mutex_unlock(&vdev->vma_lock); - mmap_read_unlock(mm); - mmput(mm); - } + unmap_mapping_range(core_vdev->inode->i_mapping, start, len, true); } void vfio_pci_zap_and_down_write_memory_lock(struct vfio_pci_core_device *vdev) { - vfio_pci_zap_and_vma_lock(vdev, false); down_write(&vdev->memory_lock); - mutex_unlock(&vdev->vma_lock); + vfio_pci_zap_bars(vdev); } u16 vfio_pci_memory_lock_and_enable(struct vfio_pci_core_device *vdev) @@ -1725,99 +1645,41 @@ void vfio_pci_memory_unlock_and_restore(struct vfio_pci_core_device *vdev, u16 c up_write(&vdev->memory_lock); } -/* Caller holds vma_lock */ -static int __vfio_pci_add_vma(struct vfio_pci_core_device *vdev, - struct vm_area_struct *vma) -{ - struct vfio_pci_mmap_vma *mmap_vma; - - mmap_vma = kmalloc(sizeof(*mmap_vma), GFP_KERNEL_ACCOUNT); - if (!mmap_vma) - return -ENOMEM; - - mmap_vma->vma = vma; - list_add(&mmap_vma->vma_next, &vdev->vma_list); - - return 0; -} - -/* - * Zap mmaps on open so that we can fault them in on access and therefore - * our vma_list only tracks mappings accessed since last zap. - */ -static void vfio_pci_mmap_open(struct vm_area_struct *vma) -{ - zap_vma_ptes(vma, vma->vm_start, vma->vm_end - vma->vm_start); -} - -static void vfio_pci_mmap_close(struct vm_area_struct *vma) +static unsigned long vma_to_pfn(struct vm_area_struct *vma) { struct vfio_pci_core_device *vdev = vma->vm_private_data; - struct vfio_pci_mmap_vma *mmap_vma; + int index = vma->vm_pgoff >> (VFIO_PCI_OFFSET_SHIFT - PAGE_SHIFT); + u64 pgoff; - mutex_lock(&vdev->vma_lock); - list_for_each_entry(mmap_vma, &vdev->vma_list, vma_next) { - if (mmap_vma->vma == vma) { - list_del(&mmap_vma->vma_next); - kfree(mmap_vma); - break; - } - } - mutex_unlock(&vdev->vma_lock); + pgoff = vma->vm_pgoff & + ((1U << (VFIO_PCI_OFFSET_SHIFT - PAGE_SHIFT)) - 1); + + return (pci_resource_start(vdev->pdev, index) >> PAGE_SHIFT) + pgoff; } static vm_fault_t vfio_pci_mmap_fault(struct vm_fault *vmf) { struct vm_area_struct *vma = vmf->vma; struct vfio_pci_core_device *vdev = vma->vm_private_data; - struct vfio_pci_mmap_vma *mmap_vma; - vm_fault_t ret = VM_FAULT_NOPAGE; + unsigned long pfn, pgoff = vmf->pgoff - vma->vm_pgoff; + vm_fault_t ret = VM_FAULT_SIGBUS; - mutex_lock(&vdev->vma_lock); - down_read(&vdev->memory_lock); + pfn = vma_to_pfn(vma); - /* - * Memory region cannot be accessed if the low power feature is engaged - * or memory access is disabled. - */ - if (vdev->pm_runtime_engaged || !__vfio_pci_memory_enabled(vdev)) { - ret = VM_FAULT_SIGBUS; - goto up_out; - } + down_read(&vdev->memory_lock); - /* - * We populate the whole vma on fault, so we need to test whether - * the vma has already been mapped, such as for concurrent faults - * to the same vma. io_remap_pfn_range() will trigger a BUG_ON if - * we ask it to fill the same range again. - */ - list_for_each_entry(mmap_vma, &vdev->vma_list, vma_next) { - if (mmap_vma->vma == vma) - goto up_out; - } + if (vdev->pm_runtime_engaged || !__vfio_pci_memory_enabled(vdev)) + goto out_disabled; - if (io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, - vma->vm_end - vma->vm_start, - vma->vm_page_prot)) { - ret = VM_FAULT_SIGBUS; - zap_vma_ptes(vma, vma->vm_start, vma->vm_end - vma->vm_start); - goto up_out; - } + ret = vmf_insert_pfn(vma, vmf->address, pfn + pgoff); - if (__vfio_pci_add_vma(vdev, vma)) { - ret = VM_FAULT_OOM; - zap_vma_ptes(vma, vma->vm_start, vma->vm_end - vma->vm_start); - } - -up_out: +out_disabled: up_read(&vdev->memory_lock); - mutex_unlock(&vdev->vma_lock); + return ret; } static const struct vm_operations_struct vfio_pci_mmap_ops = { - .open = vfio_pci_mmap_open, - .close = vfio_pci_mmap_close, .fault = vfio_pci_mmap_fault, }; @@ -1880,11 +1742,12 @@ int vfio_pci_core_mmap(struct vfio_device *core_vdev, struct vm_area_struct *vma vma->vm_private_data = vdev; vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); - vma->vm_pgoff = (pci_resource_start(pdev, index) >> PAGE_SHIFT) + pgoff; + vma->vm_page_prot = pgprot_decrypted(vma->vm_page_prot); /* - * See remap_pfn_range(), called from vfio_pci_fault() but we can't - * change vm_flags within the fault handler. Set them now. + * Set vm_flags now, they should not be changed in the fault handler. + * We want the same flags and page protection (decrypted above) as + * io_remap_pfn_range() would set. * * VM_ALLOW_ANY_UNCACHED: The VMA flag is implemented for ARM64, * allowing KVM stage 2 device mapping attributes to use Normal-NC @@ -2202,8 +2065,6 @@ int vfio_pci_core_init_dev(struct vfio_device *core_vdev) mutex_init(&vdev->ioeventfds_lock); INIT_LIST_HEAD(&vdev->dummy_resources_list); INIT_LIST_HEAD(&vdev->ioeventfds_list); - mutex_init(&vdev->vma_lock); - INIT_LIST_HEAD(&vdev->vma_list); INIT_LIST_HEAD(&vdev->sriov_pfs_item); init_rwsem(&vdev->memory_lock); xa_init(&vdev->ctx); @@ -2219,7 +2080,6 @@ void vfio_pci_core_release_dev(struct vfio_device *core_vdev) mutex_destroy(&vdev->igate); mutex_destroy(&vdev->ioeventfds_lock); - mutex_destroy(&vdev->vma_lock); kfree(vdev->region); kfree(vdev->pm_save); } @@ -2497,26 +2357,15 @@ unwind: return ret; } -/* - * We need to get memory_lock for each device, but devices can share mmap_lock, - * therefore we need to zap and hold the vma_lock for each device, and only then - * get each memory_lock. - */ static int vfio_pci_dev_set_hot_reset(struct vfio_device_set *dev_set, struct vfio_pci_group_info *groups, struct iommufd_ctx *iommufd_ctx) { - struct vfio_pci_core_device *cur_mem; - struct vfio_pci_core_device *cur_vma; - struct vfio_pci_core_device *cur; + struct vfio_pci_core_device *vdev; struct pci_dev *pdev; - bool is_mem = true; int ret; mutex_lock(&dev_set->lock); - cur_mem = list_first_entry(&dev_set->device_list, - struct vfio_pci_core_device, - vdev.dev_set_list); pdev = vfio_pci_dev_set_resettable(dev_set); if (!pdev) { @@ -2533,7 +2382,7 @@ static int vfio_pci_dev_set_hot_reset(struct vfio_device_set *dev_set, if (ret) goto err_unlock; - list_for_each_entry(cur_vma, &dev_set->device_list, vdev.dev_set_list) { + list_for_each_entry(vdev, &dev_set->device_list, vdev.dev_set_list) { bool owned; /* @@ -2557,38 +2406,38 @@ static int vfio_pci_dev_set_hot_reset(struct vfio_device_set *dev_set, * Otherwise, reset is not allowed. */ if (iommufd_ctx) { - int devid = vfio_iommufd_get_dev_id(&cur_vma->vdev, + int devid = vfio_iommufd_get_dev_id(&vdev->vdev, iommufd_ctx); owned = (devid > 0 || devid == -ENOENT); } else { - owned = vfio_dev_in_groups(&cur_vma->vdev, groups); + owned = vfio_dev_in_groups(&vdev->vdev, groups); } if (!owned) { ret = -EINVAL; - goto err_undo; + break; } /* - * Locking multiple devices is prone to deadlock, runaway and - * unwind if we hit contention. + * Take the memory write lock for each device and zap BAR + * mappings to prevent the user accessing the device while in + * reset. Locking multiple devices is prone to deadlock, + * runaway and unwind if we hit contention. */ - if (!vfio_pci_zap_and_vma_lock(cur_vma, true)) { + if (!down_write_trylock(&vdev->memory_lock)) { ret = -EBUSY; - goto err_undo; + break; } + + vfio_pci_zap_bars(vdev); } - cur_vma = NULL; - list_for_each_entry(cur_mem, &dev_set->device_list, vdev.dev_set_list) { - if (!down_write_trylock(&cur_mem->memory_lock)) { - ret = -EBUSY; - goto err_undo; - } - mutex_unlock(&cur_mem->vma_lock); + if (!list_entry_is_head(vdev, + &dev_set->device_list, vdev.dev_set_list)) { + vdev = list_prev_entry(vdev, vdev.dev_set_list); + goto err_undo; } - cur_mem = NULL; /* * The pci_reset_bus() will reset all the devices in the bus. @@ -2599,25 +2448,22 @@ static int vfio_pci_dev_set_hot_reset(struct vfio_device_set *dev_set, * cause the PCI config space reset without restoring the original * state (saved locally in 'vdev->pm_save'). */ - list_for_each_entry(cur, &dev_set->device_list, vdev.dev_set_list) - vfio_pci_set_power_state(cur, PCI_D0); + list_for_each_entry(vdev, &dev_set->device_list, vdev.dev_set_list) + vfio_pci_set_power_state(vdev, PCI_D0); ret = pci_reset_bus(pdev); + vdev = list_last_entry(&dev_set->device_list, + struct vfio_pci_core_device, vdev.dev_set_list); + err_undo: - list_for_each_entry(cur, &dev_set->device_list, vdev.dev_set_list) { - if (cur == cur_mem) - is_mem = false; - if (cur == cur_vma) - break; - if (is_mem) - up_write(&cur->memory_lock); - else - mutex_unlock(&cur->vma_lock); - } + list_for_each_entry_from_reverse(vdev, &dev_set->device_list, + vdev.dev_set_list) + up_write(&vdev->memory_lock); + + list_for_each_entry(vdev, &dev_set->device_list, vdev.dev_set_list) + pm_runtime_put(&vdev->pdev->dev); - list_for_each_entry(cur, &dev_set->device_list, vdev.dev_set_list) - pm_runtime_put(&cur->pdev->dev); err_unlock: mutex_unlock(&dev_set->lock); return ret; diff --git a/include/linux/vfio_pci_core.h b/include/linux/vfio_pci_core.h index a2c8b8bba711..f87067438ed4 100644 --- a/include/linux/vfio_pci_core.h +++ b/include/linux/vfio_pci_core.h @@ -93,8 +93,6 @@ struct vfio_pci_core_device { struct list_head sriov_pfs_item; struct vfio_pci_core_device *sriov_pf_core_dev; struct notifier_block nb; - struct mutex vma_lock; - struct list_head vma_list; struct rw_semaphore memory_lock; }; -- cgit v1.2.3 From ebfb5e8fc8b45040b979f4bf0012a01d0abac8d4 Mon Sep 17 00:00:00 2001 From: Alexis Lothoré Date: Tue, 28 May 2024 16:20:28 +0200 Subject: Revert "wifi: wilc1000: convert list management to RCU" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit f236464f1db7bea80075e6e31ac70dc6eb80547f Commit f236464f1db7 ("wifi: wilc1000: convert list management to RCU") replaced SRCU with RCU, aiming to simplify RCU usage in the driver. No documentation or commit history hinted about why SRCU has been preferred in original design, so it has been assumed to be safe to do this conversion. Unfortunately, some static analyzers raised warnings, confirmed by runtime checker, not long after the merge. At least three different issues arose when switching to RCU: - wilc_wlan_txq_filter_dup_tcp_ack is executed in a RCU read critical section yet calls wait_for_completion_timeout - wilc_wfi_init_mon_interface calls kmalloc and register_netdevice while manipulating a vif retrieved from vif list - set_channel sends command to chip (and so, also waits for a completion) while holding a vif retrieved from vif list (so, in RCU read critical section) Some of those issues are not trivial to fix and would need bigger driver rework. Fix those issues by reverting the SRCU to RCU conversion commit Reported-by: Dan Carpenter Closes: https://lore.kernel.org/linux-wireless/3b46ec7c-baee-49fd-b760-3bc12fb12eaf@moroto.mountain/ Fixes: f236464f1db7 ("wifi: wilc1000: convert list management to RCU") Signed-off-by: Alexis Lothoré Signed-off-by: Kalle Valo Link: https://msgid.link/20240528-wilc_revert_srcu_to_rcu-v1-1-bce096e0798c@bootlin.com --- drivers/net/wireless/microchip/wilc1000/cfg80211.c | 41 ++++++++++++--------- drivers/net/wireless/microchip/wilc1000/hif.c | 15 +++++--- drivers/net/wireless/microchip/wilc1000/netdev.c | 43 +++++++++++++--------- drivers/net/wireless/microchip/wilc1000/netdev.h | 5 ++- drivers/net/wireless/microchip/wilc1000/wlan.c | 5 ++- 5 files changed, 64 insertions(+), 45 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/microchip/wilc1000/cfg80211.c b/drivers/net/wireless/microchip/wilc1000/cfg80211.c index 7d9fb9f2d527..089102ed9ae5 100644 --- a/drivers/net/wireless/microchip/wilc1000/cfg80211.c +++ b/drivers/net/wireless/microchip/wilc1000/cfg80211.c @@ -237,11 +237,12 @@ static int set_channel(struct wiphy *wiphy, struct wilc_vif *vif; u32 channelnum; int result; + int srcu_idx; - rcu_read_lock(); + srcu_idx = srcu_read_lock(&wl->srcu); vif = wilc_get_wl_to_vif(wl); if (IS_ERR(vif)) { - rcu_read_unlock(); + srcu_read_unlock(&wl->srcu, srcu_idx); return PTR_ERR(vif); } @@ -252,7 +253,7 @@ static int set_channel(struct wiphy *wiphy, if (result) netdev_err(vif->ndev, "Error in setting channel\n"); - rcu_read_unlock(); + srcu_read_unlock(&wl->srcu, srcu_idx); return result; } @@ -805,8 +806,9 @@ static int set_wiphy_params(struct wiphy *wiphy, u32 changed) struct wilc *wl = wiphy_priv(wiphy); struct wilc_vif *vif; struct wilc_priv *priv; + int srcu_idx; - rcu_read_lock(); + srcu_idx = srcu_read_lock(&wl->srcu); vif = wilc_get_wl_to_vif(wl); if (IS_ERR(vif)) goto out; @@ -861,7 +863,7 @@ static int set_wiphy_params(struct wiphy *wiphy, u32 changed) netdev_err(priv->dev, "Error in setting WIPHY PARAMS\n"); out: - rcu_read_unlock(); + srcu_read_unlock(&wl->srcu, srcu_idx); return ret; } @@ -1537,19 +1539,20 @@ static struct wireless_dev *add_virtual_intf(struct wiphy *wiphy, if (type == NL80211_IFTYPE_MONITOR) { struct net_device *ndev; + int srcu_idx; - rcu_read_lock(); + srcu_idx = srcu_read_lock(&wl->srcu); vif = wilc_get_vif_from_type(wl, WILC_AP_MODE); if (!vif) { vif = wilc_get_vif_from_type(wl, WILC_GO_MODE); if (!vif) { - rcu_read_unlock(); + srcu_read_unlock(&wl->srcu, srcu_idx); goto validate_interface; } } if (vif->monitor_flag) { - rcu_read_unlock(); + srcu_read_unlock(&wl->srcu, srcu_idx); goto validate_interface; } @@ -1557,12 +1560,12 @@ static struct wireless_dev *add_virtual_intf(struct wiphy *wiphy, if (ndev) { vif->monitor_flag = 1; } else { - rcu_read_unlock(); + srcu_read_unlock(&wl->srcu, srcu_idx); return ERR_PTR(-EINVAL); } wdev = &vif->priv.wdev; - rcu_read_unlock(); + srcu_read_unlock(&wl->srcu, srcu_idx); return wdev; } @@ -1610,7 +1613,7 @@ static int del_virtual_intf(struct wiphy *wiphy, struct wireless_dev *wdev) list_del_rcu(&vif->list); wl->vif_num--; mutex_unlock(&wl->vif_mutex); - synchronize_rcu(); + synchronize_srcu(&wl->srcu); return 0; } @@ -1635,23 +1638,25 @@ static void wilc_set_wakeup(struct wiphy *wiphy, bool enabled) { struct wilc *wl = wiphy_priv(wiphy); struct wilc_vif *vif; + int srcu_idx; - rcu_read_lock(); + srcu_idx = srcu_read_lock(&wl->srcu); vif = wilc_get_wl_to_vif(wl); if (IS_ERR(vif)) { - rcu_read_unlock(); + srcu_read_unlock(&wl->srcu, srcu_idx); return; } netdev_info(vif->ndev, "cfg set wake up = %d\n", enabled); wilc_set_wowlan_trigger(vif, enabled); - rcu_read_unlock(); + srcu_read_unlock(&wl->srcu, srcu_idx); } static int set_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev, enum nl80211_tx_power_setting type, int mbm) { int ret; + int srcu_idx; s32 tx_power = MBM_TO_DBM(mbm); struct wilc *wl = wiphy_priv(wiphy); struct wilc_vif *vif; @@ -1659,10 +1664,10 @@ static int set_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev, if (!wl->initialized) return -EIO; - rcu_read_lock(); + srcu_idx = srcu_read_lock(&wl->srcu); vif = wilc_get_wl_to_vif(wl); if (IS_ERR(vif)) { - rcu_read_unlock(); + srcu_read_unlock(&wl->srcu, srcu_idx); return -EINVAL; } @@ -1674,7 +1679,7 @@ static int set_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev, ret = wilc_set_tx_power(vif, tx_power); if (ret) netdev_err(vif->ndev, "Failed to set tx power\n"); - rcu_read_unlock(); + srcu_read_unlock(&wl->srcu, srcu_idx); return ret; } @@ -1757,6 +1762,7 @@ static void wlan_init_locks(struct wilc *wl) init_completion(&wl->cfg_event); init_completion(&wl->sync_event); init_completion(&wl->txq_thread_started); + init_srcu_struct(&wl->srcu); } void wlan_deinit_locks(struct wilc *wilc) @@ -1767,6 +1773,7 @@ void wlan_deinit_locks(struct wilc *wilc) mutex_destroy(&wilc->txq_add_to_head_cs); mutex_destroy(&wilc->vif_mutex); mutex_destroy(&wilc->deinit_lock); + cleanup_srcu_struct(&wilc->srcu); } int wilc_cfg80211_init(struct wilc **wilc, struct device *dev, int io_type, diff --git a/drivers/net/wireless/microchip/wilc1000/hif.c b/drivers/net/wireless/microchip/wilc1000/hif.c index 919de6ffb821..3925ca653e80 100644 --- a/drivers/net/wireless/microchip/wilc1000/hif.c +++ b/drivers/net/wireless/microchip/wilc1000/hif.c @@ -1570,11 +1570,12 @@ void wilc_network_info_received(struct wilc *wilc, u8 *buffer, u32 length) struct host_if_drv *hif_drv; struct host_if_msg *msg; struct wilc_vif *vif; + int srcu_idx; int result; int id; id = get_unaligned_le32(&buffer[length - 4]); - rcu_read_lock(); + srcu_idx = srcu_read_lock(&wilc->srcu); vif = wilc_get_vif_from_idx(wilc, id); if (!vif) goto out; @@ -1606,7 +1607,7 @@ void wilc_network_info_received(struct wilc *wilc, u8 *buffer, u32 length) kfree(msg); } out: - rcu_read_unlock(); + srcu_read_unlock(&wilc->srcu, srcu_idx); } void wilc_gnrl_async_info_received(struct wilc *wilc, u8 *buffer, u32 length) @@ -1614,13 +1615,14 @@ void wilc_gnrl_async_info_received(struct wilc *wilc, u8 *buffer, u32 length) struct host_if_drv *hif_drv; struct host_if_msg *msg; struct wilc_vif *vif; + int srcu_idx; int result; int id; mutex_lock(&wilc->deinit_lock); id = get_unaligned_le32(&buffer[length - 4]); - rcu_read_lock(); + srcu_idx = srcu_read_lock(&wilc->srcu); vif = wilc_get_vif_from_idx(wilc, id); if (!vif) goto out; @@ -1647,7 +1649,7 @@ void wilc_gnrl_async_info_received(struct wilc *wilc, u8 *buffer, u32 length) kfree(msg); } out: - rcu_read_unlock(); + srcu_read_unlock(&wilc->srcu, srcu_idx); mutex_unlock(&wilc->deinit_lock); } @@ -1655,11 +1657,12 @@ void wilc_scan_complete_received(struct wilc *wilc, u8 *buffer, u32 length) { struct host_if_drv *hif_drv; struct wilc_vif *vif; + int srcu_idx; int result; int id; id = get_unaligned_le32(&buffer[length - 4]); - rcu_read_lock(); + srcu_idx = srcu_read_lock(&wilc->srcu); vif = wilc_get_vif_from_idx(wilc, id); if (!vif) goto out; @@ -1684,7 +1687,7 @@ void wilc_scan_complete_received(struct wilc *wilc, u8 *buffer, u32 length) } } out: - rcu_read_unlock(); + srcu_read_unlock(&wilc->srcu, srcu_idx); } int wilc_remain_on_channel(struct wilc_vif *vif, u64 cookie, u16 chan, diff --git a/drivers/net/wireless/microchip/wilc1000/netdev.c b/drivers/net/wireless/microchip/wilc1000/netdev.c index 73f56f7b002b..710e29bea560 100644 --- a/drivers/net/wireless/microchip/wilc1000/netdev.c +++ b/drivers/net/wireless/microchip/wilc1000/netdev.c @@ -127,28 +127,30 @@ void wilc_wlan_set_bssid(struct net_device *wilc_netdev, const u8 *bssid, int wilc_wlan_get_num_conn_ifcs(struct wilc *wilc) { + int srcu_idx; u8 ret_val = 0; struct wilc_vif *vif; - rcu_read_lock(); + srcu_idx = srcu_read_lock(&wilc->srcu); wilc_for_each_vif(wilc, vif) { if (!is_zero_ether_addr(vif->bssid)) ret_val++; } - rcu_read_unlock(); + srcu_read_unlock(&wilc->srcu, srcu_idx); return ret_val; } static void wilc_wake_tx_queues(struct wilc *wl) { + int srcu_idx; struct wilc_vif *ifc; - rcu_read_lock(); + srcu_idx = srcu_read_lock(&wl->srcu); wilc_for_each_vif(wl, ifc) { if (ifc->mac_opened && netif_queue_stopped(ifc->ndev)) netif_wake_queue(ifc->ndev); } - rcu_read_unlock(); + srcu_read_unlock(&wl->srcu, srcu_idx); } static int wilc_txq_task(void *vp) @@ -653,6 +655,7 @@ static int wilc_set_mac_addr(struct net_device *dev, void *p) struct sockaddr *addr = (struct sockaddr *)p; unsigned char mac_addr[ETH_ALEN]; struct wilc_vif *tmp_vif; + int srcu_idx; if (!is_valid_ether_addr(addr->sa_data)) return -EADDRNOTAVAIL; @@ -664,19 +667,19 @@ static int wilc_set_mac_addr(struct net_device *dev, void *p) /* Verify MAC Address is not already in use: */ - rcu_read_lock(); + srcu_idx = srcu_read_lock(&wilc->srcu); wilc_for_each_vif(wilc, tmp_vif) { wilc_get_mac_address(tmp_vif, mac_addr); if (ether_addr_equal(addr->sa_data, mac_addr)) { if (vif != tmp_vif) { - rcu_read_unlock(); + srcu_read_unlock(&wilc->srcu, srcu_idx); return -EADDRNOTAVAIL; } - rcu_read_unlock(); + srcu_read_unlock(&wilc->srcu, srcu_idx); return 0; } } - rcu_read_unlock(); + srcu_read_unlock(&wilc->srcu, srcu_idx); result = wilc_set_mac_address(vif, (u8 *)addr->sa_data); if (result) @@ -764,14 +767,15 @@ netdev_tx_t wilc_mac_xmit(struct sk_buff *skb, struct net_device *ndev) wilc_tx_complete); if (queue_count > FLOW_CONTROL_UPPER_THRESHOLD) { + int srcu_idx; struct wilc_vif *vif; - rcu_read_lock(); + srcu_idx = srcu_read_lock(&wilc->srcu); wilc_for_each_vif(wilc, vif) { if (vif->mac_opened) netif_stop_queue(vif->ndev); } - rcu_read_unlock(); + srcu_read_unlock(&wilc->srcu, srcu_idx); } return NETDEV_TX_OK; @@ -815,12 +819,13 @@ void wilc_frmw_to_host(struct wilc *wilc, u8 *buff, u32 size, unsigned int frame_len = 0; struct wilc_vif *vif; struct sk_buff *skb; + int srcu_idx; int stats; if (!wilc) return; - rcu_read_lock(); + srcu_idx = srcu_read_lock(&wilc->srcu); wilc_netdev = get_if_handler(wilc, buff); if (!wilc_netdev) goto out; @@ -848,14 +853,15 @@ void wilc_frmw_to_host(struct wilc *wilc, u8 *buff, u32 size, netdev_dbg(wilc_netdev, "netif_rx ret value is: %d\n", stats); } out: - rcu_read_unlock(); + srcu_read_unlock(&wilc->srcu, srcu_idx); } void wilc_wfi_mgmt_rx(struct wilc *wilc, u8 *buff, u32 size, bool is_auth) { + int srcu_idx; struct wilc_vif *vif; - rcu_read_lock(); + srcu_idx = srcu_read_lock(&wilc->srcu); wilc_for_each_vif(wilc, vif) { struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)buff; u16 type = le16_to_cpup((__le16 *)buff); @@ -876,7 +882,7 @@ void wilc_wfi_mgmt_rx(struct wilc *wilc, u8 *buff, u32 size, bool is_auth) if (vif->monitor_flag) wilc_wfi_monitor_rx(wilc->monitor_dev, buff, size); } - rcu_read_unlock(); + srcu_read_unlock(&wilc->srcu, srcu_idx); } static const struct net_device_ops wilc_netdev_ops = { @@ -906,7 +912,7 @@ void wilc_netdev_cleanup(struct wilc *wilc) list_del_rcu(&vif->list); wilc->vif_num--; mutex_unlock(&wilc->vif_mutex); - synchronize_rcu(); + synchronize_srcu(&wilc->srcu); if (vif->ndev) unregister_netdev(vif->ndev); } @@ -925,15 +931,16 @@ static u8 wilc_get_available_idx(struct wilc *wl) { int idx = 0; struct wilc_vif *vif; + int srcu_idx; - rcu_read_lock(); + srcu_idx = srcu_read_lock(&wl->srcu); wilc_for_each_vif(wl, vif) { if (vif->idx == 0) idx = 1; else idx = 0; } - rcu_read_unlock(); + srcu_read_unlock(&wl->srcu, srcu_idx); return idx; } @@ -983,7 +990,7 @@ struct wilc_vif *wilc_netdev_ifc_init(struct wilc *wl, const char *name, list_add_tail_rcu(&vif->list, &wl->vif_list); wl->vif_num += 1; mutex_unlock(&wl->vif_mutex); - synchronize_rcu(); + synchronize_srcu(&wl->srcu); return vif; diff --git a/drivers/net/wireless/microchip/wilc1000/netdev.h b/drivers/net/wireless/microchip/wilc1000/netdev.h index eecee3973d6a..5937d6d45695 100644 --- a/drivers/net/wireless/microchip/wilc1000/netdev.h +++ b/drivers/net/wireless/microchip/wilc1000/netdev.h @@ -32,8 +32,8 @@ #define wilc_for_each_vif(w, v) \ struct wilc *_w = w; \ - list_for_each_entry_rcu(v, &_w->vif_list, list, \ - rcu_read_lock_held()) + list_for_each_entry_srcu(v, &_w->vif_list, list, \ + srcu_read_lock_held(&_w->srcu)) struct wilc_wfi_stats { unsigned long rx_packets; @@ -220,6 +220,7 @@ struct wilc { /* protect vif list */ struct mutex vif_mutex; + struct srcu_struct srcu; u8 open_ifcs; /* protect head of transmit queue */ diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.c b/drivers/net/wireless/microchip/wilc1000/wlan.c index 37c32d17856e..a9e872a7b2c3 100644 --- a/drivers/net/wireless/microchip/wilc1000/wlan.c +++ b/drivers/net/wireless/microchip/wilc1000/wlan.c @@ -712,6 +712,7 @@ int wilc_wlan_handle_txq(struct wilc *wilc, u32 *txq_count) u32 *vmm_table = wilc->vmm_table; u8 ac_pkt_num_to_chip[NQUEUES] = {0, 0, 0, 0}; const struct wilc_hif_func *func; + int srcu_idx; u8 *txb = wilc->tx_buffer; struct wilc_vif *vif; @@ -723,10 +724,10 @@ int wilc_wlan_handle_txq(struct wilc *wilc, u32 *txq_count) mutex_lock(&wilc->txq_add_to_head_cs); - rcu_read_lock(); + srcu_idx = srcu_read_lock(&wilc->srcu); wilc_for_each_vif(wilc, vif) wilc_wlan_txq_filter_dup_tcp_ack(vif->ndev); - rcu_read_unlock(); + srcu_read_unlock(&wilc->srcu, srcu_idx); for (ac = 0; ac < NQUEUES; ac++) tqe_q[ac] = wilc_wlan_txq_get_first(wilc, ac); -- cgit v1.2.3 From 3596717a6fbd54c64e97e085a9f77ed511ff59f9 Mon Sep 17 00:00:00 2001 From: Alexis Lothoré Date: Tue, 28 May 2024 16:20:29 +0200 Subject: Revert "wifi: wilc1000: set atomic flag on kmemdup in srcu critical section" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 35aee01ff43d7eb6c2caa0b94e7cc6c45baeeab7 Commit 35aee01ff43d ("wifi: wilc1000: set atomic flag on kmemdup in srcu critical section") was preparatory to the SRCU to RCU conversion done by commit f236464f1db7 ("wifi: wilc1000: convert list management to RCU"). This conversion brought issues and so has been reverted, so the atomic flag is not needed anymore. Signed-off-by: Alexis Lothoré Signed-off-by: Kalle Valo Link: https://msgid.link/20240528-wilc_revert_srcu_to_rcu-v1-2-bce096e0798c@bootlin.com --- drivers/net/wireless/microchip/wilc1000/hif.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/microchip/wilc1000/hif.c b/drivers/net/wireless/microchip/wilc1000/hif.c index 3925ca653e80..f1085ccb7eed 100644 --- a/drivers/net/wireless/microchip/wilc1000/hif.c +++ b/drivers/net/wireless/microchip/wilc1000/hif.c @@ -1594,7 +1594,7 @@ void wilc_network_info_received(struct wilc *wilc, u8 *buffer, u32 length) msg->body.net_info.rssi = buffer[8]; msg->body.net_info.mgmt = kmemdup(&buffer[9], msg->body.net_info.frame_len, - GFP_ATOMIC); + GFP_KERNEL); if (!msg->body.net_info.mgmt) { kfree(msg); goto out; -- cgit v1.2.3 From 596c195680dceb34e6b994ff5571331d5dba8299 Mon Sep 17 00:00:00 2001 From: Alexis Lothoré Date: Tue, 28 May 2024 16:20:30 +0200 Subject: wifi: wilc1000: document SRCU usage instead of SRCU MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit f236464f1db7 ("wifi: wilc1000: convert list management to RCU") attempted to convert SRCU to RCU usage, assuming it was not really needed. The runtime issues that arose after merging it showed that there are code paths involving sleeping functions, and removing those would need some heavier driver rework. Add some documentation about SRCU need to make sure that any future developer do not miss some use cases if tempted to convert back again to RCU. Signed-off-by: Alexis Lothoré Signed-off-by: Kalle Valo Link: https://msgid.link/20240528-wilc_revert_srcu_to_rcu-v1-3-bce096e0798c@bootlin.com --- drivers/net/wireless/microchip/wilc1000/netdev.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/microchip/wilc1000/netdev.h b/drivers/net/wireless/microchip/wilc1000/netdev.h index 5937d6d45695..fde8610a9c84 100644 --- a/drivers/net/wireless/microchip/wilc1000/netdev.h +++ b/drivers/net/wireless/microchip/wilc1000/netdev.h @@ -220,6 +220,13 @@ struct wilc { /* protect vif list */ struct mutex vif_mutex; + /* Sleepable RCU struct to manipulate vif list. Sleepable version is + * needed over the classic RCU version because the driver's current + * design involves some sleeping code while manipulating a vif + * retrieved from vif list (so in a SRCU critical section), like: + * - sending commands to the chip, using info from retrieved vif + * - registering a new monitoring net device + */ struct srcu_struct srcu; u8 open_ifcs; -- cgit v1.2.3 From 40cecacabc460f5074398753feb9ed7d43e8dfa6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 28 May 2024 14:23:08 +0200 Subject: wifi: mt76: mt7615: add missing chanctx ops Here's another one I missed during the initial conversion, fix that. Cc: stable@vger.kernel.org Reported-by: Rene Petersen Fixes: 0a44dfc07074 ("wifi: mac80211: simplify non-chanctx drivers") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218895 Signed-off-by: Johannes Berg Signed-off-by: Kalle Valo Link: https://msgid.link/20240528142308.3f7db1821e68.I531135d7ad76331a50244d6d5288e14aa9668390@changeid --- drivers/net/wireless/mediatek/mt76/mt7615/main.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c index 0971c164b57e..c27acaf0eb1c 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c @@ -1326,6 +1326,10 @@ static void mt7615_set_rekey_data(struct ieee80211_hw *hw, #endif /* CONFIG_PM */ const struct ieee80211_ops mt7615_ops = { + .add_chanctx = ieee80211_emulate_add_chanctx, + .remove_chanctx = ieee80211_emulate_remove_chanctx, + .change_chanctx = ieee80211_emulate_change_chanctx, + .switch_vif_chanctx = ieee80211_emulate_switch_vif_chanctx, .tx = mt7615_tx, .start = mt7615_start, .stop = mt7615_stop, -- cgit v1.2.3 From 819bda58e77bb67974f94dc1aa11b0556b6f6889 Mon Sep 17 00:00:00 2001 From: Bitterblue Smith Date: Wed, 29 May 2024 20:19:47 +0300 Subject: wifi: rtlwifi: Ignore IEEE80211_CONF_CHANGE_RETRY_LIMITS Since commit 0a44dfc07074 ("wifi: mac80211: simplify non-chanctx drivers") ieee80211_hw_config() is no longer called with changed = ~0. rtlwifi relied on ~0 in order to ignore the default retry limits of 4/7, preferring 48/48 in station mode and 7/7 in AP/IBSS. RTL8192DU has a lot of packet loss with the default limits from mac80211. Fix it by ignoring IEEE80211_CONF_CHANGE_RETRY_LIMITS completely, because it's the simplest solution. Link: https://lore.kernel.org/linux-wireless/cedd13d7691f4692b2a2fa5a24d44a22@realtek.com/ Cc: stable@vger.kernel.org # 6.9.x Signed-off-by: Bitterblue Smith Acked-by: Ping-Ke Shih Signed-off-by: Kalle Valo Link: https://msgid.link/1fabb8e4-adf3-47ae-8462-8aea963bc2a5@gmail.com --- drivers/net/wireless/realtek/rtlwifi/core.c | 15 --------------- 1 file changed, 15 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/realtek/rtlwifi/core.c b/drivers/net/wireless/realtek/rtlwifi/core.c index 2e60a6991ca1..42b7db12b1bd 100644 --- a/drivers/net/wireless/realtek/rtlwifi/core.c +++ b/drivers/net/wireless/realtek/rtlwifi/core.c @@ -633,21 +633,6 @@ static int rtl_op_config(struct ieee80211_hw *hw, u32 changed) } } - if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) { - rtl_dbg(rtlpriv, COMP_MAC80211, DBG_LOUD, - "IEEE80211_CONF_CHANGE_RETRY_LIMITS %x\n", - hw->conf.long_frame_max_tx_count); - /* brought up everything changes (changed == ~0) indicates first - * open, so use our default value instead of that of wiphy. - */ - if (changed != ~0) { - mac->retry_long = hw->conf.long_frame_max_tx_count; - mac->retry_short = hw->conf.long_frame_max_tx_count; - rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RETRY_LIMIT, - (u8 *)(&hw->conf.long_frame_max_tx_count)); - } - } - if (changed & IEEE80211_CONF_CHANGE_CHANNEL && !rtlpriv->proximity.proxim_on) { struct ieee80211_channel *channel = hw->conf.chandef.chan; -- cgit v1.2.3 From 30636258a7c9174be44ddb2318bae4f66d4beab0 Mon Sep 17 00:00:00 2001 From: Heng Qi Date: Thu, 30 May 2024 11:41:43 +0800 Subject: virtio_net: fix missing lock protection on control_buf access Refactored the handling of control_buf to be within the cvq_lock critical section, mitigating race conditions between reading device responses and new command submissions. Fixes: 6f45ab3e0409 ("virtio_net: Add a lock for the command VQ.") Signed-off-by: Heng Qi Reviewed-by: Hariprasad Kelam Acked-by: Jason Wang Reviewed-by: Xuan Zhuo Link: https://lore.kernel.org/r/20240530034143.19579-1-hengqi@linux.alibaba.com Signed-off-by: Jakub Kicinski --- drivers/net/virtio_net.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 4a802c0ea2cb..1ea8e6a24286 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -2686,6 +2686,7 @@ static bool virtnet_send_command_reply(struct virtnet_info *vi, u8 class, u8 cmd { struct scatterlist *sgs[5], hdr, stat; u32 out_num = 0, tmp, in_num = 0; + bool ok; int ret; /* Caller should know better */ @@ -2731,8 +2732,9 @@ static bool virtnet_send_command_reply(struct virtnet_info *vi, u8 class, u8 cmd } unlock: + ok = vi->ctrl->status == VIRTIO_NET_OK; mutex_unlock(&vi->cvq_lock); - return vi->ctrl->status == VIRTIO_NET_OK; + return ok; } static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd, -- cgit v1.2.3 From 9e0945b1901c9eed4fbee3b8a3870487b2bdc936 Mon Sep 17 00:00:00 2001 From: Heng Qi Date: Tue, 28 May 2024 21:41:15 +0800 Subject: virtio_net: fix possible dim status unrecoverable When the dim worker is scheduled, if it no longer needs to issue commands, dim may not be able to return to the working state later. For example, the following single queue scenario: 1. The dim worker of rxq0 is scheduled, and the dim status is changed to DIM_APPLY_NEW_PROFILE; 2. dim is disabled or parameters have not been modified; 3. virtnet_rx_dim_work exits directly; Then, even if net_dim is invoked again, it cannot work because the state is not restored to DIM_START_MEASURE. Fixes: 6208799553a8 ("virtio-net: support rx netdim") Signed-off-by: Heng Qi Reviewed-by: Jiri Pirko Acked-by: Michael S. Tsirkin Reviewed-by: Xuan Zhuo Link: https://lore.kernel.org/r/20240528134116.117426-2-hengqi@linux.alibaba.com Signed-off-by: Jakub Kicinski --- drivers/net/virtio_net.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 1ea8e6a24286..774a292a6090 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -4419,9 +4419,9 @@ static void virtnet_rx_dim_work(struct work_struct *work) if (err) pr_debug("%s: Failed to send dim parameters on rxq%d\n", dev->name, qnum); - dim->state = DIM_START_MEASURE; } out: + dim->state = DIM_START_MEASURE; mutex_unlock(&rq->dim_lock); } -- cgit v1.2.3 From d1f0bd01bc58f35b5353ad9dbe5f7249a8f3368e Mon Sep 17 00:00:00 2001 From: Heng Qi Date: Tue, 28 May 2024 21:41:16 +0800 Subject: virtio_net: fix a spurious deadlock issue When the following snippet is run, lockdep will report a deadlock[1]. /* Acquire all queues dim_locks */ for (i = 0; i < vi->max_queue_pairs; i++) mutex_lock(&vi->rq[i].dim_lock); There's no deadlock here because the vq locks are always taken in the same order, but lockdep can not figure it out. So refactoring the code to alleviate the problem. [1] ======================================================== WARNING: possible recursive locking detected 6.9.0-rc7+ #319 Not tainted -------------------------------------------- ethtool/962 is trying to acquire lock: but task is already holding lock: other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&vi->rq[i].dim_lock); lock(&vi->rq[i].dim_lock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by ethtool/962: #0: ffffffff82dbaab0 (cb_lock){++++}-{3:3}, at: genl_rcv+0x19/0x40 #1: ffffffff82dad0a8 (rtnl_mutex){+.+.}-{3:3}, at: ethnl_default_set_doit+0xbe/0x1e0 stack backtrace: CPU: 6 PID: 962 Comm: ethtool Not tainted 6.9.0-rc7+ #319 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack_lvl+0x79/0xb0 check_deadlock+0x130/0x220 __lock_acquire+0x861/0x990 lock_acquire.part.0+0x72/0x1d0 ? lock_acquire+0xf8/0x130 __mutex_lock+0x71/0xd50 virtnet_set_coalesce+0x151/0x190 __ethnl_set_coalesce.isra.0+0x3f8/0x4d0 ethnl_set_coalesce+0x34/0x90 ethnl_default_set_doit+0xdd/0x1e0 genl_family_rcv_msg_doit+0xdc/0x130 genl_family_rcv_msg+0x154/0x230 ? __pfx_ethnl_default_set_doit+0x10/0x10 genl_rcv_msg+0x4b/0xa0 ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x5a/0x110 genl_rcv+0x28/0x40 netlink_unicast+0x1af/0x280 netlink_sendmsg+0x20e/0x460 __sys_sendto+0x1fe/0x210 ? find_held_lock+0x2b/0x80 ? do_user_addr_fault+0x3a2/0x8a0 ? __lock_release+0x5e/0x160 ? do_user_addr_fault+0x3a2/0x8a0 ? lock_release+0x72/0x140 ? do_user_addr_fault+0x3a7/0x8a0 __x64_sys_sendto+0x29/0x30 do_syscall_64+0x78/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fixes: 4d4ac2ececd3 ("virtio_net: Add a lock for per queue RX coalesce") Signed-off-by: Heng Qi Acked-by: Michael S. Tsirkin Reviewed-by: Xuan Zhuo Acked-by: Jason Wang Link: https://lore.kernel.org/r/20240528134116.117426-3-hengqi@linux.alibaba.com Signed-off-by: Jakub Kicinski --- drivers/net/virtio_net.c | 36 ++++++++++++++++-------------------- 1 file changed, 16 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 774a292a6090..61a57d134544 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -4259,7 +4259,6 @@ static int virtnet_send_rx_notf_coal_cmds(struct virtnet_info *vi, struct virtio_net_ctrl_coal_rx *coal_rx __free(kfree) = NULL; bool rx_ctrl_dim_on = !!ec->use_adaptive_rx_coalesce; struct scatterlist sgs_rx; - int ret = 0; int i; if (rx_ctrl_dim_on && !virtio_has_feature(vi->vdev, VIRTIO_NET_F_VQ_NOTF_COAL)) @@ -4269,27 +4268,27 @@ static int virtnet_send_rx_notf_coal_cmds(struct virtnet_info *vi, ec->rx_max_coalesced_frames != vi->intr_coal_rx.max_packets)) return -EINVAL; - /* Acquire all queues dim_locks */ - for (i = 0; i < vi->max_queue_pairs; i++) - mutex_lock(&vi->rq[i].dim_lock); - if (rx_ctrl_dim_on && !vi->rx_dim_enabled) { vi->rx_dim_enabled = true; - for (i = 0; i < vi->max_queue_pairs; i++) + for (i = 0; i < vi->max_queue_pairs; i++) { + mutex_lock(&vi->rq[i].dim_lock); vi->rq[i].dim_enabled = true; - goto unlock; + mutex_unlock(&vi->rq[i].dim_lock); + } + return 0; } coal_rx = kzalloc(sizeof(*coal_rx), GFP_KERNEL); - if (!coal_rx) { - ret = -ENOMEM; - goto unlock; - } + if (!coal_rx) + return -ENOMEM; if (!rx_ctrl_dim_on && vi->rx_dim_enabled) { vi->rx_dim_enabled = false; - for (i = 0; i < vi->max_queue_pairs; i++) + for (i = 0; i < vi->max_queue_pairs; i++) { + mutex_lock(&vi->rq[i].dim_lock); vi->rq[i].dim_enabled = false; + mutex_unlock(&vi->rq[i].dim_lock); + } } /* Since the per-queue coalescing params can be set, @@ -4302,22 +4301,19 @@ static int virtnet_send_rx_notf_coal_cmds(struct virtnet_info *vi, if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_NOTF_COAL, VIRTIO_NET_CTRL_NOTF_COAL_RX_SET, - &sgs_rx)) { - ret = -EINVAL; - goto unlock; - } + &sgs_rx)) + return -EINVAL; vi->intr_coal_rx.max_usecs = ec->rx_coalesce_usecs; vi->intr_coal_rx.max_packets = ec->rx_max_coalesced_frames; for (i = 0; i < vi->max_queue_pairs; i++) { + mutex_lock(&vi->rq[i].dim_lock); vi->rq[i].intr_coal.max_usecs = ec->rx_coalesce_usecs; vi->rq[i].intr_coal.max_packets = ec->rx_max_coalesced_frames; - } -unlock: - for (i = vi->max_queue_pairs - 1; i >= 0; i--) mutex_unlock(&vi->rq[i].dim_lock); + } - return ret; + return 0; } static int virtnet_send_notf_coal_cmds(struct virtnet_info *vi, -- cgit v1.2.3 From d7bd473632d07f8a54655c270c0940cc3671c548 Mon Sep 17 00:00:00 2001 From: Jean-Baptiste Maneyrol Date: Wed, 29 May 2024 15:47:17 +0000 Subject: iio: imu: inv_icm42600: stabilized timestamp in interrupt Use IRQF_ONESHOT flag to ensure the timestamp is not updated in the hard handler during the thread handler. And compute and use the effective watermark value that correspond to this first timestamp. This way we can ensure the timestamp is always corresponding to the value used by the timestamping mechanism. Otherwise, it is possible that between FIFO count read and FIFO processing the timestamp is overwritten in the hard handler. Fixes: ec74ae9fd37c ("iio: imu: inv_icm42600: add accurate timestamping") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol Link: https://lore.kernel.org/r/20240529154717.651863-1-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron --- drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c | 19 +++++++++++++++++-- drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.h | 2 ++ drivers/iio/imu/inv_icm42600/inv_icm42600_core.c | 1 + 3 files changed, 20 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c index 63b85ec88c13..a8cf74c84c3c 100644 --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c @@ -222,10 +222,15 @@ int inv_icm42600_buffer_update_watermark(struct inv_icm42600_state *st) latency_accel = period_accel * wm_accel; /* 0 value for watermark means that the sensor is turned off */ + if (wm_gyro == 0 && wm_accel == 0) + return 0; + if (latency_gyro == 0) { watermark = wm_accel; + st->fifo.watermark.eff_accel = wm_accel; } else if (latency_accel == 0) { watermark = wm_gyro; + st->fifo.watermark.eff_gyro = wm_gyro; } else { /* compute the smallest latency that is a multiple of both */ if (latency_gyro <= latency_accel) @@ -241,6 +246,13 @@ int inv_icm42600_buffer_update_watermark(struct inv_icm42600_state *st) watermark = latency / period; if (watermark < 1) watermark = 1; + /* update effective watermark */ + st->fifo.watermark.eff_gyro = latency / period_gyro; + if (st->fifo.watermark.eff_gyro < 1) + st->fifo.watermark.eff_gyro = 1; + st->fifo.watermark.eff_accel = latency / period_accel; + if (st->fifo.watermark.eff_accel < 1) + st->fifo.watermark.eff_accel = 1; } /* compute watermark value in bytes */ @@ -514,7 +526,7 @@ int inv_icm42600_buffer_fifo_parse(struct inv_icm42600_state *st) /* handle gyroscope timestamp and FIFO data parsing */ if (st->fifo.nb.gyro > 0) { ts = &gyro_st->ts; - inv_sensors_timestamp_interrupt(ts, st->fifo.nb.gyro, + inv_sensors_timestamp_interrupt(ts, st->fifo.watermark.eff_gyro, st->timestamp.gyro); ret = inv_icm42600_gyro_parse_fifo(st->indio_gyro); if (ret) @@ -524,7 +536,7 @@ int inv_icm42600_buffer_fifo_parse(struct inv_icm42600_state *st) /* handle accelerometer timestamp and FIFO data parsing */ if (st->fifo.nb.accel > 0) { ts = &accel_st->ts; - inv_sensors_timestamp_interrupt(ts, st->fifo.nb.accel, + inv_sensors_timestamp_interrupt(ts, st->fifo.watermark.eff_accel, st->timestamp.accel); ret = inv_icm42600_accel_parse_fifo(st->indio_accel); if (ret) @@ -577,6 +589,9 @@ int inv_icm42600_buffer_init(struct inv_icm42600_state *st) unsigned int val; int ret; + st->fifo.watermark.eff_gyro = 1; + st->fifo.watermark.eff_accel = 1; + /* * Default FIFO configuration (bits 7 to 5) * - use invalid value diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.h b/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.h index 8b85ee333bf8..f6c85daf42b0 100644 --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.h +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.h @@ -32,6 +32,8 @@ struct inv_icm42600_fifo { struct { unsigned int gyro; unsigned int accel; + unsigned int eff_gyro; + unsigned int eff_accel; } watermark; size_t count; struct { diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c index 96116a68ab29..62fdae530334 100644 --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c @@ -537,6 +537,7 @@ static int inv_icm42600_irq_init(struct inv_icm42600_state *st, int irq, if (ret) return ret; + irq_type |= IRQF_ONESHOT; return devm_request_threaded_irq(dev, irq, inv_icm42600_irq_timestamp, inv_icm42600_irq_handler, irq_type, "inv_icm42600", st); -- cgit v1.2.3 From 245f3b149e6cc3ac6ee612cdb7042263bfc9e73c Mon Sep 17 00:00:00 2001 From: Jean-Baptiste Maneyrol Date: Mon, 27 May 2024 21:00:08 +0000 Subject: iio: imu: inv_icm42600: delete unneeded update watermark call Update watermark will be done inside the hwfifo_set_watermark callback just after the update_scan_mode. It is useless to do it here. Fixes: 7f85e42a6c54 ("iio: imu: inv_icm42600: add buffer support in iio devices") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol Link: https://lore.kernel.org/r/20240527210008.612932-1-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron --- drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c | 4 ---- drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c | 4 ---- 2 files changed, 8 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c index 83d8504ebfff..4b2566693614 100644 --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c @@ -130,10 +130,6 @@ static int inv_icm42600_accel_update_scan_mode(struct iio_dev *indio_dev, /* update data FIFO write */ inv_sensors_timestamp_apply_odr(ts, 0, 0, 0); ret = inv_icm42600_buffer_set_fifo_en(st, fifo_en | st->fifo.en); - if (ret) - goto out_unlock; - - ret = inv_icm42600_buffer_update_watermark(st); out_unlock: mutex_unlock(&st->lock); diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c index e6f8de80128c..938af5b640b0 100644 --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c @@ -130,10 +130,6 @@ static int inv_icm42600_gyro_update_scan_mode(struct iio_dev *indio_dev, /* update data FIFO write */ inv_sensors_timestamp_apply_odr(ts, 0, 0, 0); ret = inv_icm42600_buffer_set_fifo_en(st, fifo_en | st->fifo.en); - if (ret) - goto out_unlock; - - ret = inv_icm42600_buffer_update_watermark(st); out_unlock: mutex_unlock(&st->lock); -- cgit v1.2.3 From beb2800074c15362cf9f6c7301120910046d6556 Mon Sep 17 00:00:00 2001 From: Jiaxun Yang Date: Mon, 3 Jun 2024 15:45:53 +0800 Subject: LoongArch: Fix entry point in kernel image header Currently kernel entry in head.S is in DMW address range, firmware is instructed to jump to this address after loading the kernel image. However kernel should not make any assumption on firmware's DMW setting, thus the entry point should be a physical address falls into direct translation region. Fix by converting entry address to physical and amend entry calculation logic in libstub accordingly. BTW, use ABSOLUTE() to calculate variables to make Clang/LLVM happy. Cc: stable@vger.kernel.org Signed-off-by: Jiaxun Yang Signed-off-by: Huacai Chen --- arch/loongarch/kernel/head.S | 2 +- arch/loongarch/kernel/vmlinux.lds.S | 10 ++++++---- drivers/firmware/efi/libstub/loongarch.c | 2 +- 3 files changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/arch/loongarch/kernel/head.S b/arch/loongarch/kernel/head.S index c4f7de2e2805..4677ea8fa8e9 100644 --- a/arch/loongarch/kernel/head.S +++ b/arch/loongarch/kernel/head.S @@ -22,7 +22,7 @@ _head: .word MZ_MAGIC /* "MZ", MS-DOS header */ .org 0x8 - .dword kernel_entry /* Kernel entry point */ + .dword _kernel_entry /* Kernel entry point (physical address) */ .dword _kernel_asize /* Kernel image effective size */ .quad PHYS_LINK_KADDR /* Kernel image load offset from start of RAM */ .org 0x38 /* 0x20 ~ 0x37 reserved */ diff --git a/arch/loongarch/kernel/vmlinux.lds.S b/arch/loongarch/kernel/vmlinux.lds.S index e8e97dbf9ca4..3c7595342730 100644 --- a/arch/loongarch/kernel/vmlinux.lds.S +++ b/arch/loongarch/kernel/vmlinux.lds.S @@ -6,6 +6,7 @@ #define PAGE_SIZE _PAGE_SIZE #define RO_EXCEPTION_TABLE_ALIGN 4 +#define PHYSADDR_MASK 0xffffffffffff /* 48-bit */ /* * Put .bss..swapper_pg_dir as the first thing in .bss. This will @@ -142,10 +143,11 @@ SECTIONS #ifdef CONFIG_EFI_STUB /* header symbols */ - _kernel_asize = _end - _text; - _kernel_fsize = _edata - _text; - _kernel_vsize = _end - __initdata_begin; - _kernel_rsize = _edata - __initdata_begin; + _kernel_entry = ABSOLUTE(kernel_entry & PHYSADDR_MASK); + _kernel_asize = ABSOLUTE(_end - _text); + _kernel_fsize = ABSOLUTE(_edata - _text); + _kernel_vsize = ABSOLUTE(_end - __initdata_begin); + _kernel_rsize = ABSOLUTE(_edata - __initdata_begin); #endif .gptab.sdata : { diff --git a/drivers/firmware/efi/libstub/loongarch.c b/drivers/firmware/efi/libstub/loongarch.c index 684c9354637c..d0ef93551c44 100644 --- a/drivers/firmware/efi/libstub/loongarch.c +++ b/drivers/firmware/efi/libstub/loongarch.c @@ -41,7 +41,7 @@ static efi_status_t exit_boot_func(struct efi_boot_memmap *map, void *priv) unsigned long __weak kernel_entry_address(unsigned long kernel_addr, efi_loaded_image_t *image) { - return *(unsigned long *)(kernel_addr + 8) - VMLINUX_LOAD_ADDRESS + kernel_addr; + return *(unsigned long *)(kernel_addr + 8) - PHYSADDR(VMLINUX_LOAD_ADDRESS) + kernel_addr; } efi_status_t efi_boot_kernel(void *handle, efi_loaded_image_t *image, -- cgit v1.2.3 From 629f2b4e05225e53125aaf7ff0b87d5d53897128 Mon Sep 17 00:00:00 2001 From: Chen Ni Date: Tue, 28 May 2024 11:08:32 +0800 Subject: drm/panel: sitronix-st7789v: Add check for of_drm_get_panel_orientation Add check for the return value of of_drm_get_panel_orientation() and return the error if it fails in order to catch the error. Fixes: b27c0f6d208d ("drm/panel: sitronix-st7789v: add panel orientation support") Signed-off-by: Chen Ni Reviewed-by: Michael Riesch Acked-by: Jessica Zhang Link: https://lore.kernel.org/r/20240528030832.2529471-1-nichen@iscas.ac.cn Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20240528030832.2529471-1-nichen@iscas.ac.cn --- drivers/gpu/drm/panel/panel-sitronix-st7789v.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c index e8f385b9c618..28bfc48a9127 100644 --- a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c +++ b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c @@ -643,7 +643,9 @@ static int st7789v_probe(struct spi_device *spi) if (ret) return dev_err_probe(dev, ret, "Failed to get backlight\n"); - of_drm_get_panel_orientation(spi->dev.of_node, &ctx->orientation); + ret = of_drm_get_panel_orientation(spi->dev.of_node, &ctx->orientation); + if (ret) + return dev_err_probe(&spi->dev, ret, "Failed to get orientation\n"); drm_panel_add(&ctx->panel); -- cgit v1.2.3 From 38a38f5a36da9820680d413972cb733349400532 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 25 May 2024 21:38:53 +0200 Subject: Input: silead - Always support 10 fingers When support for Silead touchscreens was orginal added some touchscreens with older firmware versions only supported 5 fingers and this was made the default requiring the setting of a "silead,max-fingers=10" uint32 device-property for all touchscreen models which do support 10 fingers. There are very few models with the old 5 finger fw, so in practice the setting of the "silead,max-fingers=10" is boilerplate which needs to be copy and pasted to every touchscreen config. Reporting that 10 fingers are supported on devices which only support 5 fingers doesn't cause any problems for userspace in practice, since at max 4 finger gestures are supported anyways. Drop the max_fingers configuration and simply always assume 10 fingers. Signed-off-by: Hans de Goede Acked-by: Dmitry Torokhov Link: https://lore.kernel.org/r/20240525193854.39130-2-hdegoede@redhat.com --- drivers/input/touchscreen/silead.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c index bbd366dcb69a..6a42b27c4599 100644 --- a/drivers/input/touchscreen/silead.c +++ b/drivers/input/touchscreen/silead.c @@ -71,7 +71,6 @@ struct silead_ts_data { struct regulator_bulk_data regulators[2]; char fw_name[64]; struct touchscreen_properties prop; - u32 max_fingers; u32 chip_id; struct input_mt_pos pos[SILEAD_MAX_FINGERS]; int slots[SILEAD_MAX_FINGERS]; @@ -136,7 +135,7 @@ static int silead_ts_request_input_dev(struct silead_ts_data *data) touchscreen_parse_properties(data->input, true, &data->prop); silead_apply_efi_fw_min_max(data); - input_mt_init_slots(data->input, data->max_fingers, + input_mt_init_slots(data->input, SILEAD_MAX_FINGERS, INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED | INPUT_MT_TRACK); @@ -256,10 +255,10 @@ static void silead_ts_read_data(struct i2c_client *client) return; } - if (buf[0] > data->max_fingers) { + if (buf[0] > SILEAD_MAX_FINGERS) { dev_warn(dev, "More touches reported then supported %d > %d\n", - buf[0], data->max_fingers); - buf[0] = data->max_fingers; + buf[0], SILEAD_MAX_FINGERS); + buf[0] = SILEAD_MAX_FINGERS; } if (silead_ts_handle_pen_data(data, buf)) @@ -315,7 +314,6 @@ sync: static int silead_ts_init(struct i2c_client *client) { - struct silead_ts_data *data = i2c_get_clientdata(client); int error; error = i2c_smbus_write_byte_data(client, SILEAD_REG_RESET, @@ -325,7 +323,7 @@ static int silead_ts_init(struct i2c_client *client) usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX); error = i2c_smbus_write_byte_data(client, SILEAD_REG_TOUCH_NR, - data->max_fingers); + SILEAD_MAX_FINGERS); if (error) goto i2c_write_err; usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX); @@ -591,13 +589,6 @@ static void silead_ts_read_props(struct i2c_client *client) const char *str; int error; - error = device_property_read_u32(dev, "silead,max-fingers", - &data->max_fingers); - if (error) { - dev_dbg(dev, "Max fingers read error %d\n", error); - data->max_fingers = 5; /* Most devices handle up-to 5 fingers */ - } - error = device_property_read_string(dev, "firmware-name", &str); if (!error) snprintf(data->fw_name, sizeof(data->fw_name), -- cgit v1.2.3 From 84b26f509c1b9c8b3c3c63d75912701f151fd148 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 25 May 2024 21:38:54 +0200 Subject: platform/x86: touchscreen_dmi: Drop "silead,max-fingers" property The silead touchscreen driver now defaults to 10 fingers, so it is no longer necessary to have a "silead,max-fingers=10" property for each silead touchscreen model. Drop this property from all the configs. Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20240525193854.39130-3-hdegoede@redhat.com --- drivers/platform/x86/touchscreen_dmi.c | 57 ---------------------------------- 1 file changed, 57 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c index 2d9ca2292ea1..3f626584f2c3 100644 --- a/drivers/platform/x86/touchscreen_dmi.c +++ b/drivers/platform/x86/touchscreen_dmi.c @@ -34,7 +34,6 @@ static const struct property_entry archos_101_cesium_educ_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1280), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-archos-101-cesium-educ.fw"), { } @@ -49,7 +48,6 @@ static const struct property_entry bush_bush_windows_tablet_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1850), PROPERTY_ENTRY_U32("touchscreen-size-y", 1280), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-bush-bush-windows-tablet.fw"), { } @@ -79,7 +77,6 @@ static const struct property_entry chuwi_hi8_air_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1148), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3676-chuwi-hi8-air.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), { } }; @@ -95,7 +92,6 @@ static const struct property_entry chuwi_hi8_pro_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1148), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-chuwi-hi8-pro.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -123,7 +119,6 @@ static const struct property_entry chuwi_hi10_air_props[] = { PROPERTY_ENTRY_U32("touchscreen-fuzz-x", 5), PROPERTY_ENTRY_U32("touchscreen-fuzz-y", 4), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hi10-air.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -139,7 +134,6 @@ static const struct property_entry chuwi_hi10_plus_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1908), PROPERTY_ENTRY_U32("touchscreen-size-y", 1270), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hi10plus.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), PROPERTY_ENTRY_BOOL("silead,pen-supported"), PROPERTY_ENTRY_U32("silead,pen-resolution-x", 8), @@ -171,7 +165,6 @@ static const struct property_entry chuwi_hi10_pro_props[] = { PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hi10-pro.fw"), PROPERTY_ENTRY_U32_ARRAY("silead,efi-fw-min-max", chuwi_hi10_pro_efi_min_max), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), PROPERTY_ENTRY_BOOL("silead,pen-supported"), PROPERTY_ENTRY_U32("silead,pen-resolution-x", 8), @@ -201,7 +194,6 @@ static const struct property_entry chuwi_hibook_props[] = { PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hibook.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -227,7 +219,6 @@ static const struct property_entry chuwi_vi8_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1140), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3676-chuwi-vi8.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -255,7 +246,6 @@ static const struct property_entry chuwi_vi10_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1858), PROPERTY_ENTRY_U32("touchscreen-size-y", 1280), PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-chuwi-vi10.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -271,7 +261,6 @@ static const struct property_entry chuwi_surbook_mini_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 2040), PROPERTY_ENTRY_U32("touchscreen-size-y", 1524), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-surbook-mini.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), { } }; @@ -289,7 +278,6 @@ static const struct property_entry connect_tablet9_props[] = { PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-connect-tablet9.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), { } }; @@ -306,7 +294,6 @@ static const struct property_entry csl_panther_tab_hd_props[] = { PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-csl-panther-tab-hd.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), { } }; @@ -322,7 +309,6 @@ static const struct property_entry cube_iwork8_air_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 896), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3670-cube-iwork8-air.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), { } }; @@ -346,7 +332,6 @@ static const struct property_entry cube_knote_i1101_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1961), PROPERTY_ENTRY_U32("touchscreen-size-y", 1513), PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-cube-knote-i1101.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -360,7 +345,6 @@ static const struct property_entry dexp_ursus_7w_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 890), PROPERTY_ENTRY_U32("touchscreen-size-y", 630), PROPERTY_ENTRY_STRING("firmware-name", "gsl1686-dexp-ursus-7w.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -376,7 +360,6 @@ static const struct property_entry dexp_ursus_kx210i_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1720), PROPERTY_ENTRY_U32("touchscreen-size-y", 1137), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-dexp-ursus-kx210i.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -391,7 +374,6 @@ static const struct property_entry digma_citi_e200_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1500), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1686-digma_citi_e200.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -450,7 +432,6 @@ static const struct property_entry irbis_tw90_props[] = { PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-irbis_tw90.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -466,7 +447,6 @@ static const struct property_entry irbis_tw118_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1960), PROPERTY_ENTRY_U32("touchscreen-size-y", 1510), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-irbis-tw118.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), { } }; @@ -483,7 +463,6 @@ static const struct property_entry itworks_tw891_props[] = { PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3670-itworks-tw891.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), { } }; @@ -496,7 +475,6 @@ static const struct property_entry jumper_ezpad_6_pro_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1980), PROPERTY_ENTRY_U32("touchscreen-size-y", 1500), PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-jumper-ezpad-6-pro.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -511,7 +489,6 @@ static const struct property_entry jumper_ezpad_6_pro_b_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1500), PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-jumper-ezpad-6-pro-b.fw"), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -527,7 +504,6 @@ static const struct property_entry jumper_ezpad_6_m4_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1950), PROPERTY_ENTRY_U32("touchscreen-size-y", 1525), PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-jumper-ezpad-6-m4.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -544,7 +520,6 @@ static const struct property_entry jumper_ezpad_7_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1526), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-jumper-ezpad-7.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,stuck-controller-bug"), { } }; @@ -561,7 +536,6 @@ static const struct property_entry jumper_ezpad_mini3_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1138), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3676-jumper-ezpad-mini3.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), { } }; @@ -578,7 +552,6 @@ static const struct property_entry mpman_converter9_props[] = { PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-mpman-converter9.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), { } }; @@ -594,7 +567,6 @@ static const struct property_entry mpman_mpwin895cl_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1150), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-mpman-mpwin895cl.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -611,7 +583,6 @@ static const struct property_entry myria_my8307_props[] = { PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-myria-my8307.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -628,7 +599,6 @@ static const struct property_entry onda_obook_20_plus_props[] = { PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3676-onda-obook-20-plus.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -645,7 +615,6 @@ static const struct property_entry onda_v80_plus_v3_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1140), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3676-onda-v80-plus-v3.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -669,7 +638,6 @@ static const struct property_entry onda_v820w_32g_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1140), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-onda-v820w-32g.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -687,7 +655,6 @@ static const struct property_entry onda_v891_v5_props[] = { PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3676-onda-v891-v5.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -703,7 +670,6 @@ static const struct property_entry onda_v891w_v1_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1676), PROPERTY_ENTRY_U32("touchscreen-size-y", 1130), PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-onda-v891w-v1.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -720,7 +686,6 @@ static const struct property_entry onda_v891w_v3_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1135), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3676-onda-v891w-v3.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -759,7 +724,6 @@ static const struct property_entry pipo_w11_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1984), PROPERTY_ENTRY_U32("touchscreen-size-y", 1532), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-pipo-w11.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -775,7 +739,6 @@ static const struct property_entry positivo_c4128b_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1915), PROPERTY_ENTRY_U32("touchscreen-size-y", 1269), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-positivo-c4128b.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), { } }; @@ -791,7 +754,6 @@ static const struct property_entry pov_mobii_wintab_p800w_v20_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1146), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-pov-mobii-wintab-p800w-v20.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -808,7 +770,6 @@ static const struct property_entry pov_mobii_wintab_p800w_v21_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1148), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-pov-mobii-wintab-p800w.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -825,7 +786,6 @@ static const struct property_entry pov_mobii_wintab_p1006w_v10_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1520), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-pov-mobii-wintab-p1006w-v10.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -842,7 +802,6 @@ static const struct property_entry predia_basic_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1144), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-predia-basic.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -859,7 +818,6 @@ static const struct property_entry rca_cambio_w101_v2_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 874), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-rca-cambio-w101-v2.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), { } }; @@ -874,7 +832,6 @@ static const struct property_entry rwc_nanote_p8_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1140), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-rwc-nanote-p8.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), { } }; @@ -890,7 +847,6 @@ static const struct property_entry schneider_sct101ctm_props[] = { PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-schneider-sct101ctm.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -906,7 +862,6 @@ static const struct property_entry globalspace_solt_ivw116_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1723), PROPERTY_ENTRY_U32("touchscreen-size-y", 1077), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-globalspace-solt-ivw116.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -923,7 +878,6 @@ static const struct property_entry techbite_arc_11_6_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1270), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-techbite-arc-11-6.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), { } }; @@ -939,7 +893,6 @@ static const struct property_entry teclast_tbook11_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1264), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-teclast-tbook11.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -965,7 +918,6 @@ static const struct property_entry teclast_x16_plus_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1264), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-teclast-x16-plus.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -988,7 +940,6 @@ static const struct property_entry teclast_x3_plus_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1980), PROPERTY_ENTRY_U32("touchscreen-size-y", 1500), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-teclast-x3-plus.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -1004,7 +955,6 @@ static const struct property_entry teclast_x98plus2_props[] = { PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1686-teclast_x98plus2.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), { } }; @@ -1018,7 +968,6 @@ static const struct property_entry trekstor_primebook_c11_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1530), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-trekstor-primebook-c11.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -1032,7 +981,6 @@ static const struct property_entry trekstor_primebook_c13_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 2624), PROPERTY_ENTRY_U32("touchscreen-size-y", 1920), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-trekstor-primebook-c13.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -1046,7 +994,6 @@ static const struct property_entry trekstor_primetab_t13b_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 2500), PROPERTY_ENTRY_U32("touchscreen-size-y", 1900), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-trekstor-primetab-t13b.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), { } @@ -1074,7 +1021,6 @@ static const struct property_entry trekstor_surftab_twin_10_1_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-y", 1280), PROPERTY_ENTRY_U32("touchscreen-inverted-y", 1), PROPERTY_ENTRY_STRING("firmware-name", "gsl3670-surftab-twin-10-1-st10432-8.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -1090,7 +1036,6 @@ static const struct property_entry trekstor_surftab_wintron70_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 884), PROPERTY_ENTRY_U32("touchscreen-size-y", 632), PROPERTY_ENTRY_STRING("firmware-name", "gsl1686-surftab-wintron70-st70416-6.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -1107,7 +1052,6 @@ static const struct property_entry viglen_connect_10_props[] = { PROPERTY_ENTRY_U32("touchscreen-fuzz-y", 6), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-viglen-connect-10.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; @@ -1121,7 +1065,6 @@ static const struct property_entry vinga_twizzle_j116_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1920), PROPERTY_ENTRY_U32("touchscreen-size-y", 1280), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-vinga-twizzle_j116.fw"), - PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), { } }; -- cgit v1.2.3 From 55624db051c8bdd39acbb1f35774c3f7b97c07b8 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Sun, 2 Jun 2024 11:58:00 +0300 Subject: platform/x86: touchscreen_dmi: Use 2-argument strscpy() Use 2-argument strscpy(), which is not only shorter but also provides an additional check that destination buffer is an array. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240602090244.1666360-8-andy.shevchenko@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- drivers/platform/x86/touchscreen_dmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c index 3f626584f2c3..f74af0a689f2 100644 --- a/drivers/platform/x86/touchscreen_dmi.c +++ b/drivers/platform/x86/touchscreen_dmi.c @@ -1850,7 +1850,7 @@ static int __init ts_parse_props(char *str) u32 u32val; int i, ret; - strscpy(orig_str, str, sizeof(orig_str)); + strscpy(orig_str, str); /* * str is part of the static_command_line from init/main.c and poking -- cgit v1.2.3 From 078fc56f5c1787a9272373742f817b320c046d1a Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 28 May 2024 13:59:33 +0200 Subject: platform/x86: yt2-1380: add CONFIG_EXTCON dependency This driver uses the extcon subsystem and fails to build when it cannot call into that subsystem: x86_64-linux-ld: vmlinux.o: in function `yt2_1380_fc_worker': lenovo-yoga-tab2-pro-1380-fastcharger.c:(.text+0xa9d819): undefined reference to `extcon_get_state' x86_64-linux-ld: lenovo-yoga-tab2-pro-1380-fastcharger.c:(.text+0xa9d853): undefined reference to `extcon_get_state' x86_64-linux-ld: vmlinux.o: in function `yt2_1380_fc_serdev_probe': lenovo-yoga-tab2-pro-1380-fastcharger.c:(.text+0xa9da22): undefined reference to `extcon_get_extcon_dev' x86_64-linux-ld: lenovo-yoga-tab2-pro-1380-fastcharger.c:(.text+0xa9dc0c): undefined reference to `devm_extcon_register_notifier_all' Add a Kconfig dependency to make it it always builds correctly. Fixes: b2ed33e8d486 ("platform/x86: Add lenovo-yoga-tab2-pro-1380-fastcharger driver") Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20240528115940.3169455-1-arnd@kernel.org Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- drivers/platform/x86/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 1953317541ea..665fa9524986 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -136,6 +136,7 @@ config YOGABOOK config YT2_1380 tristate "Lenovo Yoga Tablet 2 1380 fast charge driver" depends on SERIAL_DEV_BUS + depends on EXTCON depends on ACPI help Say Y here to enable support for the custom fast charging protocol -- cgit v1.2.3 From 1981b296f858010eae409548fd297659b2cc570e Mon Sep 17 00:00:00 2001 From: Armin Wolf Date: Tue, 28 May 2024 22:49:02 +0200 Subject: platform/x86: dell-smbios: Fix wrong token data in sysfs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When reading token data from sysfs on my Inspiron 3505, the token locations and values are wrong. This happens because match_attribute() blindly assumes that all entries in da_tokens have an associated entry in token_attrs. This however is not true as soon as da_tokens[] contains zeroed token entries. Those entries are being skipped when initialising token_attrs, breaking the core assumption of match_attribute(). Fix this by defining an extra struct for each pair of token attributes and use container_of() to retrieve token information. Tested on a Dell Inspiron 3050. Fixes: 33b9ca1e53b4 ("platform/x86: dell-smbios: Add a sysfs interface for SMBIOS tokens") Signed-off-by: Armin Wolf Reviewed-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20240528204903.445546-1-W_Armin@gmx.de Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- drivers/platform/x86/dell/dell-smbios-base.c | 92 +++++++++++----------------- 1 file changed, 36 insertions(+), 56 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/dell/dell-smbios-base.c b/drivers/platform/x86/dell/dell-smbios-base.c index e61bfaf8b5c4..86b95206cb1b 100644 --- a/drivers/platform/x86/dell/dell-smbios-base.c +++ b/drivers/platform/x86/dell/dell-smbios-base.c @@ -11,6 +11,7 @@ */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include #include #include #include @@ -25,11 +26,16 @@ static u32 da_supported_commands; static int da_num_tokens; static struct platform_device *platform_device; static struct calling_interface_token *da_tokens; -static struct device_attribute *token_location_attrs; -static struct device_attribute *token_value_attrs; +static struct token_sysfs_data *token_entries; static struct attribute **token_attrs; static DEFINE_MUTEX(smbios_mutex); +struct token_sysfs_data { + struct device_attribute location_attr; + struct device_attribute value_attr; + struct calling_interface_token *token; +}; + struct smbios_device { struct list_head list; struct device *device; @@ -416,47 +422,26 @@ static void __init find_tokens(const struct dmi_header *dm, void *dummy) } } -static int match_attribute(struct device *dev, - struct device_attribute *attr) -{ - int i; - - for (i = 0; i < da_num_tokens * 2; i++) { - if (!token_attrs[i]) - continue; - if (strcmp(token_attrs[i]->name, attr->attr.name) == 0) - return i/2; - } - dev_dbg(dev, "couldn't match: %s\n", attr->attr.name); - return -EINVAL; -} - static ssize_t location_show(struct device *dev, struct device_attribute *attr, char *buf) { - int i; + struct token_sysfs_data *data = container_of(attr, struct token_sysfs_data, location_attr); if (!capable(CAP_SYS_ADMIN)) return -EPERM; - i = match_attribute(dev, attr); - if (i > 0) - return sysfs_emit(buf, "%08x", da_tokens[i].location); - return 0; + return sysfs_emit(buf, "%08x", data->token->location); } static ssize_t value_show(struct device *dev, struct device_attribute *attr, char *buf) { - int i; + struct token_sysfs_data *data = container_of(attr, struct token_sysfs_data, value_attr); if (!capable(CAP_SYS_ADMIN)) return -EPERM; - i = match_attribute(dev, attr); - if (i > 0) - return sysfs_emit(buf, "%08x", da_tokens[i].value); - return 0; + return sysfs_emit(buf, "%08x", data->token->value); } static struct attribute_group smbios_attribute_group = { @@ -473,22 +458,15 @@ static int build_tokens_sysfs(struct platform_device *dev) { char *location_name; char *value_name; - size_t size; int ret; int i, j; - /* (number of tokens + 1 for null terminated */ - size = sizeof(struct device_attribute) * (da_num_tokens + 1); - token_location_attrs = kzalloc(size, GFP_KERNEL); - if (!token_location_attrs) + token_entries = kcalloc(da_num_tokens, sizeof(*token_entries), GFP_KERNEL); + if (!token_entries) return -ENOMEM; - token_value_attrs = kzalloc(size, GFP_KERNEL); - if (!token_value_attrs) - goto out_allocate_value; /* need to store both location and value + terminator*/ - size = sizeof(struct attribute *) * ((2 * da_num_tokens) + 1); - token_attrs = kzalloc(size, GFP_KERNEL); + token_attrs = kcalloc((2 * da_num_tokens) + 1, sizeof(*token_attrs), GFP_KERNEL); if (!token_attrs) goto out_allocate_attrs; @@ -496,27 +474,32 @@ static int build_tokens_sysfs(struct platform_device *dev) /* skip empty */ if (da_tokens[i].tokenID == 0) continue; + + token_entries[i].token = &da_tokens[i]; + /* add location */ location_name = kasprintf(GFP_KERNEL, "%04x_location", da_tokens[i].tokenID); if (location_name == NULL) goto out_unwind_strings; - sysfs_attr_init(&token_location_attrs[i].attr); - token_location_attrs[i].attr.name = location_name; - token_location_attrs[i].attr.mode = 0444; - token_location_attrs[i].show = location_show; - token_attrs[j++] = &token_location_attrs[i].attr; + + sysfs_attr_init(&token_entries[i].location_attr.attr); + token_entries[i].location_attr.attr.name = location_name; + token_entries[i].location_attr.attr.mode = 0444; + token_entries[i].location_attr.show = location_show; + token_attrs[j++] = &token_entries[i].location_attr.attr; /* add value */ value_name = kasprintf(GFP_KERNEL, "%04x_value", da_tokens[i].tokenID); if (value_name == NULL) goto loop_fail_create_value; - sysfs_attr_init(&token_value_attrs[i].attr); - token_value_attrs[i].attr.name = value_name; - token_value_attrs[i].attr.mode = 0444; - token_value_attrs[i].show = value_show; - token_attrs[j++] = &token_value_attrs[i].attr; + + sysfs_attr_init(&token_entries[i].value_attr.attr); + token_entries[i].value_attr.attr.name = value_name; + token_entries[i].value_attr.attr.mode = 0444; + token_entries[i].value_attr.show = value_show; + token_attrs[j++] = &token_entries[i].value_attr.attr; continue; loop_fail_create_value: @@ -532,14 +515,12 @@ loop_fail_create_value: out_unwind_strings: while (i--) { - kfree(token_location_attrs[i].attr.name); - kfree(token_value_attrs[i].attr.name); + kfree(token_entries[i].location_attr.attr.name); + kfree(token_entries[i].value_attr.attr.name); } kfree(token_attrs); out_allocate_attrs: - kfree(token_value_attrs); -out_allocate_value: - kfree(token_location_attrs); + kfree(token_entries); return -ENOMEM; } @@ -551,12 +532,11 @@ static void free_group(struct platform_device *pdev) sysfs_remove_group(&pdev->dev.kobj, &smbios_attribute_group); for (i = 0; i < da_num_tokens; i++) { - kfree(token_location_attrs[i].attr.name); - kfree(token_value_attrs[i].attr.name); + kfree(token_entries[i].location_attr.attr.name); + kfree(token_entries[i].value_attr.attr.name); } kfree(token_attrs); - kfree(token_value_attrs); - kfree(token_location_attrs); + kfree(token_entries); } static int __init dell_smbios_init(void) -- cgit v1.2.3 From 306aec7eea8c83e8212f4dd6e5b358c508e3e466 Mon Sep 17 00:00:00 2001 From: Armin Wolf Date: Tue, 28 May 2024 22:49:03 +0200 Subject: platform/x86: dell-smbios: Simplify error handling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When the allocation of value_name fails, the error handling code uses two gotos for error handling, which is not necessary. Simplify the error handling in this case by only using a single goto. Tested on a Dell Inspiron 3505. Signed-off-by: Armin Wolf Reviewed-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20240528204903.445546-2-W_Armin@gmx.de Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- drivers/platform/x86/dell/dell-smbios-base.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/dell/dell-smbios-base.c b/drivers/platform/x86/dell/dell-smbios-base.c index 86b95206cb1b..b562ed99ec4e 100644 --- a/drivers/platform/x86/dell/dell-smbios-base.c +++ b/drivers/platform/x86/dell/dell-smbios-base.c @@ -492,19 +492,16 @@ static int build_tokens_sysfs(struct platform_device *dev) /* add value */ value_name = kasprintf(GFP_KERNEL, "%04x_value", da_tokens[i].tokenID); - if (value_name == NULL) - goto loop_fail_create_value; + if (!value_name) { + kfree(location_name); + goto out_unwind_strings; + } sysfs_attr_init(&token_entries[i].value_attr.attr); token_entries[i].value_attr.attr.name = value_name; token_entries[i].value_attr.attr.mode = 0444; token_entries[i].value_attr.show = value_show; token_attrs[j++] = &token_entries[i].value_attr.attr; - continue; - -loop_fail_create_value: - kfree(location_name); - goto out_unwind_strings; } smbios_attribute_group.attrs = token_attrs; -- cgit v1.2.3 From 77f1972bdcf7513293e8bbe376b9fe837310ee9c Mon Sep 17 00:00:00 2001 From: Suma Hegde Date: Mon, 3 Jun 2024 08:15:12 +0000 Subject: platform/x86/amd/hsmp: Check HSMP support on AMD family of processors HSMP interface is supported only on few x86 processors from AMD. Accessing HSMP registers on rest of the platforms might cause unexpected behaviour. So add a check. Also unavailability of this interface on rest of the processors is not an error. Hence, use pr_info() instead of the pr_err() to log the message. Signed-off-by: Suma Hegde Reviewed-by: Naveen Krishna Chatradhi Link: https://lore.kernel.org/r/20240603081512.142909-1-suma.hegde@amd.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- drivers/platform/x86/amd/hsmp.c | 50 +++++++++++++++++++++++++++++++++++------ 1 file changed, 43 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/amd/hsmp.c b/drivers/platform/x86/amd/hsmp.c index d84ea66eecc6..8fcf38eed7f0 100644 --- a/drivers/platform/x86/amd/hsmp.c +++ b/drivers/platform/x86/amd/hsmp.c @@ -907,16 +907,44 @@ static int hsmp_plat_dev_register(void) return ret; } +/* + * This check is only needed for backward compatibility of previous platforms. + * All new platforms are expected to support ACPI based probing. + */ +static bool legacy_hsmp_support(void) +{ + if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD) + return false; + + switch (boot_cpu_data.x86) { + case 0x19: + switch (boot_cpu_data.x86_model) { + case 0x00 ... 0x1F: + case 0x30 ... 0x3F: + case 0x90 ... 0x9F: + case 0xA0 ... 0xAF: + return true; + default: + return false; + } + case 0x1A: + switch (boot_cpu_data.x86_model) { + case 0x00 ... 0x1F: + return true; + default: + return false; + } + default: + return false; + } + + return false; +} + static int __init hsmp_plt_init(void) { int ret = -ENODEV; - if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD || boot_cpu_data.x86 < 0x19) { - pr_err("HSMP is not supported on Family:%x model:%x\n", - boot_cpu_data.x86, boot_cpu_data.x86_model); - return ret; - } - /* * amd_nb_num() returns number of SMN/DF interfaces present in the system * if we have N SMN/DF interfaces that ideally means N sockets @@ -930,7 +958,15 @@ static int __init hsmp_plt_init(void) return ret; if (!plat_dev.is_acpi_device) { - ret = hsmp_plat_dev_register(); + if (legacy_hsmp_support()) { + /* Not ACPI device, but supports HSMP, register a plat_dev */ + ret = hsmp_plat_dev_register(); + } else { + /* Not ACPI, Does not support HSMP */ + pr_info("HSMP is not supported on Family:%x model:%x\n", + boot_cpu_data.x86, boot_cpu_data.x86_model); + ret = -ENODEV; + } if (ret) platform_driver_unregister(&amd_hsmp_driver); } -- cgit v1.2.3 From 0110c4b110477bb1f19b0d02361846be7ab08300 Mon Sep 17 00:00:00 2001 From: Sunil V L Date: Mon, 27 May 2024 13:41:13 +0530 Subject: irqchip/riscv-intc: Prevent memory leak when riscv_intc_init_common() fails When riscv_intc_init_common() fails, the firmware node allocated is not freed. Add the missing free(). Fixes: 7023b9d83f03 ("irqchip/riscv-intc: Add ACPI support") Signed-off-by: Sunil V L Signed-off-by: Thomas Gleixner Reviewed-by: Anup Patel Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240527081113.616189-1-sunilvl@ventanamicro.com --- drivers/irqchip/irq-riscv-intc.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c index 9e71c4428814..4f3a12383a1e 100644 --- a/drivers/irqchip/irq-riscv-intc.c +++ b/drivers/irqchip/irq-riscv-intc.c @@ -253,8 +253,9 @@ IRQCHIP_DECLARE(andes, "andestech,cpu-intc", riscv_intc_init); static int __init riscv_intc_acpi_init(union acpi_subtable_headers *header, const unsigned long end) { - struct fwnode_handle *fn; struct acpi_madt_rintc *rintc; + struct fwnode_handle *fn; + int rc; rintc = (struct acpi_madt_rintc *)header; @@ -273,7 +274,11 @@ static int __init riscv_intc_acpi_init(union acpi_subtable_headers *header, return -ENOMEM; } - return riscv_intc_init_common(fn, &riscv_intc_chip); + rc = riscv_intc_init_common(fn, &riscv_intc_chip); + if (rc) + irq_domain_free_fwnode(fn); + + return rc; } IRQCHIP_ACPI_DECLARE(riscv_intc, ACPI_MADT_TYPE_RINTC, NULL, -- cgit v1.2.3 From 6149db4997f582e958da675092f21c666e3b67b7 Mon Sep 17 00:00:00 2001 From: Tristram Ha Date: Tue, 28 May 2024 19:20:23 -0700 Subject: net: phy: micrel: fix KSZ9477 PHY issues after suspend/resume When the PHY is powered up after powered down most of the registers are reset, so the PHY setup code needs to be done again. In addition the interrupt register will need to be setup again so that link status indication works again. Fixes: 26dd2974c5b5 ("net: phy: micrel: Move KSZ9477 errata fixes to PHY driver") Signed-off-by: Tristram Ha Signed-off-by: David S. Miller --- drivers/net/phy/micrel.c | 62 +++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 56 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 2b8f8b7f1517..8c20cf937530 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -1939,7 +1939,7 @@ static const struct ksz9477_errata_write ksz9477_errata_writes[] = { {0x1c, 0x20, 0xeeee}, }; -static int ksz9477_config_init(struct phy_device *phydev) +static int ksz9477_phy_errata(struct phy_device *phydev) { int err; int i; @@ -1967,16 +1967,30 @@ static int ksz9477_config_init(struct phy_device *phydev) return err; } + err = genphy_restart_aneg(phydev); + if (err) + return err; + + return err; +} + +static int ksz9477_config_init(struct phy_device *phydev) +{ + int err; + + /* Only KSZ9897 family of switches needs this fix. */ + if ((phydev->phy_id & 0xf) == 1) { + err = ksz9477_phy_errata(phydev); + if (err) + return err; + } + /* According to KSZ9477 Errata DS80000754C (Module 4) all EEE modes * in this switch shall be regarded as broken. */ if (phydev->dev_flags & MICREL_NO_EEE) phydev->eee_broken_modes = -1; - err = genphy_restart_aneg(phydev); - if (err) - return err; - return kszphy_config_init(phydev); } @@ -2085,6 +2099,42 @@ static int kszphy_resume(struct phy_device *phydev) return 0; } +static int ksz9477_resume(struct phy_device *phydev) +{ + int ret; + + /* No need to initialize registers if not powered down. */ + ret = phy_read(phydev, MII_BMCR); + if (ret < 0) + return ret; + if (!(ret & BMCR_PDOWN)) + return 0; + + genphy_resume(phydev); + + /* After switching from power-down to normal mode, an internal global + * reset is automatically generated. Wait a minimum of 1 ms before + * read/write access to the PHY registers. + */ + usleep_range(1000, 2000); + + /* Only KSZ9897 family of switches needs this fix. */ + if ((phydev->phy_id & 0xf) == 1) { + ret = ksz9477_phy_errata(phydev); + if (ret) + return ret; + } + + /* Enable PHY Interrupts */ + if (phy_interrupt_is_valid(phydev)) { + phydev->interrupts = PHY_INTERRUPT_ENABLED; + if (phydev->drv->config_intr) + phydev->drv->config_intr(phydev); + } + + return 0; +} + static int kszphy_probe(struct phy_device *phydev) { const struct kszphy_type *type = phydev->drv->driver_data; @@ -5493,7 +5543,7 @@ static struct phy_driver ksphy_driver[] = { .config_intr = kszphy_config_intr, .handle_interrupt = kszphy_handle_interrupt, .suspend = genphy_suspend, - .resume = genphy_resume, + .resume = ksz9477_resume, .get_features = ksz9477_get_features, } }; -- cgit v1.2.3 From e306a894bd511804ba9db7c00ca9cc05b55df1f2 Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Wed, 29 May 2024 14:54:56 -0700 Subject: irqchip/sifive-plic: Chain to parent IRQ after handlers are ready Now that the PLIC uses a platform driver, the driver is probed later in the boot process, where interrupts from peripherals might already be pending. As a result, plic_handle_irq() may be called as early as the call to irq_set_chained_handler() completes. But this call happens before the per-context handler is completely set up, so there is a window where plic_handle_irq() can see incomplete per-context state and crash. Avoid this by delaying the call to irq_set_chained_handler() until all handlers from all PLICs are initialized. Fixes: 8ec99b033147 ("irqchip/sifive-plic: Convert PLIC driver into a platform driver") Reported-by: Geert Uytterhoeven Signed-off-by: Samuel Holland Signed-off-by: Thomas Gleixner Tested-by: Geert Uytterhoeven Reviewed-by: Anup Patel Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240529215458.937817-1-samuel.holland@sifive.com Closes: https://lore.kernel.org/r/CAMuHMdVYFFR7K5SbHBLY-JHhb7YpgGMS_hnRWm8H0KD-wBo+4A@mail.gmail.com/ --- drivers/irqchip/irq-sifive-plic.c | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c index 8fb183ced1e7..9e22f7e378f5 100644 --- a/drivers/irqchip/irq-sifive-plic.c +++ b/drivers/irqchip/irq-sifive-plic.c @@ -85,7 +85,7 @@ struct plic_handler { struct plic_priv *priv; }; static int plic_parent_irq __ro_after_init; -static bool plic_cpuhp_setup_done __ro_after_init; +static bool plic_global_setup_done __ro_after_init; static DEFINE_PER_CPU(struct plic_handler, plic_handlers); static int plic_irq_set_type(struct irq_data *d, unsigned int type); @@ -487,10 +487,8 @@ static int plic_probe(struct platform_device *pdev) unsigned long plic_quirks = 0; struct plic_handler *handler; u32 nr_irqs, parent_hwirq; - struct irq_domain *domain; struct plic_priv *priv; irq_hw_number_t hwirq; - bool cpuhp_setup; if (is_of_node(dev->fwnode)) { const struct of_device_id *id; @@ -549,14 +547,6 @@ static int plic_probe(struct platform_device *pdev) continue; } - /* Find parent domain and register chained handler */ - domain = irq_find_matching_fwnode(riscv_get_intc_hwnode(), DOMAIN_BUS_ANY); - if (!plic_parent_irq && domain) { - plic_parent_irq = irq_create_mapping(domain, RV_IRQ_EXT); - if (plic_parent_irq) - irq_set_chained_handler(plic_parent_irq, plic_handle_irq); - } - /* * When running in M-mode we need to ignore the S-mode handler. * Here we assume it always comes later, but that might be a @@ -597,25 +587,35 @@ done: goto fail_cleanup_contexts; /* - * We can have multiple PLIC instances so setup cpuhp state + * We can have multiple PLIC instances so setup global state * and register syscore operations only once after context * handlers of all online CPUs are initialized. */ - if (!plic_cpuhp_setup_done) { - cpuhp_setup = true; + if (!plic_global_setup_done) { + struct irq_domain *domain; + bool global_setup = true; + for_each_online_cpu(cpu) { handler = per_cpu_ptr(&plic_handlers, cpu); if (!handler->present) { - cpuhp_setup = false; + global_setup = false; break; } } - if (cpuhp_setup) { + + if (global_setup) { + /* Find parent domain and register chained handler */ + domain = irq_find_matching_fwnode(riscv_get_intc_hwnode(), DOMAIN_BUS_ANY); + if (domain) + plic_parent_irq = irq_create_mapping(domain, RV_IRQ_EXT); + if (plic_parent_irq) + irq_set_chained_handler(plic_parent_irq, plic_handle_irq); + cpuhp_setup_state(CPUHP_AP_IRQ_SIFIVE_PLIC_STARTING, "irqchip/sifive/plic:starting", plic_starting_cpu, plic_dying_cpu); register_syscore_ops(&plic_irq_syscore_ops); - plic_cpuhp_setup_done = true; + plic_global_setup_done = true; } } -- cgit v1.2.3 From 8c219e52ca4d9a67cd6a7074e91bf29b55edc075 Mon Sep 17 00:00:00 2001 From: Gregor Herburger Date: Thu, 30 May 2024 12:19:59 +0200 Subject: gpio: tqmx86: fix typo in Kconfig label Fix description for GPIO_TQMX86 from QTMX86 to TQMx86. Fixes: b868db94a6a7 ("gpio: tqmx86: Add GPIO from for this IO controller") Signed-off-by: Gregor Herburger Signed-off-by: Matthias Schiffer Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/e0e38c9944ad6d281d9a662a45d289b88edc808e.1717063994.git.matthias.schiffer@ew.tq-group.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 3dbddec07028..1c28a48915bb 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -1576,7 +1576,7 @@ config GPIO_TPS68470 are "output only" GPIOs. config GPIO_TQMX86 - tristate "TQ-Systems QTMX86 GPIO" + tristate "TQ-Systems TQMx86 GPIO" depends on MFD_TQMX86 || COMPILE_TEST depends on HAS_IOPORT_MAP select GPIOLIB_IRQCHIP -- cgit v1.2.3 From 9d6a811b522ba558bcb4ec01d12e72a0af8e9f6e Mon Sep 17 00:00:00 2001 From: Matthias Schiffer Date: Thu, 30 May 2024 12:20:00 +0200 Subject: gpio: tqmx86: introduce shadow register for GPIO output value The TQMx86 GPIO controller uses the same register address for input and output data. Reading the register will always return current inputs rather than the previously set outputs (regardless of the current direction setting). Therefore, using a RMW pattern does not make sense when setting output values. Instead, the previously set output register value needs to be stored as a shadow register. As there is no reliable way to get the current output values from the hardware, also initialize all channels to 0, to ensure that stored and actual output values match. This should usually not have any effect in practise, as the TQMx86 UEFI sets all outputs to 0 during boot. Also prepare for extension of the driver to more than 8 GPIOs by using DECLARE_BITMAP. Fixes: b868db94a6a7 ("gpio: tqmx86: Add GPIO from for this IO controller") Signed-off-by: Matthias Schiffer Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/d0555933becd45fa92a85675d26e4d59343ddc01.1717063994.git.matthias.schiffer@ew.tq-group.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-tqmx86.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-tqmx86.c b/drivers/gpio/gpio-tqmx86.c index 3a28c1f273c3..b7e2dbbdc4eb 100644 --- a/drivers/gpio/gpio-tqmx86.c +++ b/drivers/gpio/gpio-tqmx86.c @@ -6,6 +6,7 @@ * Vadim V.Vlasov */ +#include #include #include #include @@ -38,6 +39,7 @@ struct tqmx86_gpio_data { void __iomem *io_base; int irq; raw_spinlock_t spinlock; + DECLARE_BITMAP(output, TQMX86_NGPIO); u8 irq_type[TQMX86_NGPI]; }; @@ -64,15 +66,10 @@ static void tqmx86_gpio_set(struct gpio_chip *chip, unsigned int offset, { struct tqmx86_gpio_data *gpio = gpiochip_get_data(chip); unsigned long flags; - u8 val; raw_spin_lock_irqsave(&gpio->spinlock, flags); - val = tqmx86_gpio_read(gpio, TQMX86_GPIOD); - if (value) - val |= BIT(offset); - else - val &= ~BIT(offset); - tqmx86_gpio_write(gpio, val, TQMX86_GPIOD); + __assign_bit(offset, gpio->output, value); + tqmx86_gpio_write(gpio, bitmap_get_value8(gpio->output, 0), TQMX86_GPIOD); raw_spin_unlock_irqrestore(&gpio->spinlock, flags); } @@ -277,6 +274,13 @@ static int tqmx86_gpio_probe(struct platform_device *pdev) tqmx86_gpio_write(gpio, (u8)~TQMX86_DIR_INPUT_MASK, TQMX86_GPIODD); + /* + * Reading the previous output state is not possible with TQMx86 hardware. + * Initialize all outputs to 0 to have a defined state that matches the + * shadow register. + */ + tqmx86_gpio_write(gpio, 0, TQMX86_GPIOD); + chip = &gpio->chip; chip->label = "gpio-tqmx86"; chip->owner = THIS_MODULE; -- cgit v1.2.3 From 08af509efdf8dad08e972b48de0e2c2a7919ea8b Mon Sep 17 00:00:00 2001 From: Matthias Schiffer Date: Thu, 30 May 2024 12:20:01 +0200 Subject: gpio: tqmx86: store IRQ trigger type and unmask status separately irq_set_type() should not implicitly unmask the IRQ. All accesses to the interrupt configuration register are moved to a new helper tqmx86_gpio_irq_config(). We also introduce the new rule that accessing irq_type must happen while locked, which will become significant for fixing EDGE_BOTH handling. Fixes: b868db94a6a7 ("gpio: tqmx86: Add GPIO from for this IO controller") Signed-off-by: Matthias Schiffer Link: https://lore.kernel.org/r/6aa4f207f77cb58ef64ffb947e91949b0f753ccd.1717063994.git.matthias.schiffer@ew.tq-group.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-tqmx86.c | 48 +++++++++++++++++++++++++++------------------- 1 file changed, 28 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-tqmx86.c b/drivers/gpio/gpio-tqmx86.c index b7e2dbbdc4eb..7e428c872a25 100644 --- a/drivers/gpio/gpio-tqmx86.c +++ b/drivers/gpio/gpio-tqmx86.c @@ -29,15 +29,19 @@ #define TQMX86_GPIIC 3 /* GPI Interrupt Configuration Register */ #define TQMX86_GPIIS 4 /* GPI Interrupt Status Register */ +#define TQMX86_GPII_NONE 0 #define TQMX86_GPII_FALLING BIT(0) #define TQMX86_GPII_RISING BIT(1) #define TQMX86_GPII_MASK (BIT(0) | BIT(1)) #define TQMX86_GPII_BITS 2 +/* Stored in irq_type with GPII bits */ +#define TQMX86_INT_UNMASKED BIT(2) struct tqmx86_gpio_data { struct gpio_chip chip; void __iomem *io_base; int irq; + /* Lock must be held for accessing output and irq_type fields */ raw_spinlock_t spinlock; DECLARE_BITMAP(output, TQMX86_NGPIO); u8 irq_type[TQMX86_NGPI]; @@ -104,21 +108,32 @@ static int tqmx86_gpio_get_direction(struct gpio_chip *chip, return GPIO_LINE_DIRECTION_OUT; } +static void tqmx86_gpio_irq_config(struct tqmx86_gpio_data *gpio, int offset) + __must_hold(&gpio->spinlock) +{ + u8 type = TQMX86_GPII_NONE, gpiic; + + if (gpio->irq_type[offset] & TQMX86_INT_UNMASKED) + type = gpio->irq_type[offset] & TQMX86_GPII_MASK; + + gpiic = tqmx86_gpio_read(gpio, TQMX86_GPIIC); + gpiic &= ~(TQMX86_GPII_MASK << (offset * TQMX86_GPII_BITS)); + gpiic |= type << (offset * TQMX86_GPII_BITS); + tqmx86_gpio_write(gpio, gpiic, TQMX86_GPIIC); +} + static void tqmx86_gpio_irq_mask(struct irq_data *data) { unsigned int offset = (data->hwirq - TQMX86_NGPO); struct tqmx86_gpio_data *gpio = gpiochip_get_data( irq_data_get_irq_chip_data(data)); unsigned long flags; - u8 gpiic, mask; - - mask = TQMX86_GPII_MASK << (offset * TQMX86_GPII_BITS); raw_spin_lock_irqsave(&gpio->spinlock, flags); - gpiic = tqmx86_gpio_read(gpio, TQMX86_GPIIC); - gpiic &= ~mask; - tqmx86_gpio_write(gpio, gpiic, TQMX86_GPIIC); + gpio->irq_type[offset] &= ~TQMX86_INT_UNMASKED; + tqmx86_gpio_irq_config(gpio, offset); raw_spin_unlock_irqrestore(&gpio->spinlock, flags); + gpiochip_disable_irq(&gpio->chip, irqd_to_hwirq(data)); } @@ -128,16 +143,12 @@ static void tqmx86_gpio_irq_unmask(struct irq_data *data) struct tqmx86_gpio_data *gpio = gpiochip_get_data( irq_data_get_irq_chip_data(data)); unsigned long flags; - u8 gpiic, mask; - - mask = TQMX86_GPII_MASK << (offset * TQMX86_GPII_BITS); gpiochip_enable_irq(&gpio->chip, irqd_to_hwirq(data)); + raw_spin_lock_irqsave(&gpio->spinlock, flags); - gpiic = tqmx86_gpio_read(gpio, TQMX86_GPIIC); - gpiic &= ~mask; - gpiic |= gpio->irq_type[offset] << (offset * TQMX86_GPII_BITS); - tqmx86_gpio_write(gpio, gpiic, TQMX86_GPIIC); + gpio->irq_type[offset] |= TQMX86_INT_UNMASKED; + tqmx86_gpio_irq_config(gpio, offset); raw_spin_unlock_irqrestore(&gpio->spinlock, flags); } @@ -148,7 +159,7 @@ static int tqmx86_gpio_irq_set_type(struct irq_data *data, unsigned int type) unsigned int offset = (data->hwirq - TQMX86_NGPO); unsigned int edge_type = type & IRQF_TRIGGER_MASK; unsigned long flags; - u8 new_type, gpiic; + u8 new_type; switch (edge_type) { case IRQ_TYPE_EDGE_RISING: @@ -164,13 +175,10 @@ static int tqmx86_gpio_irq_set_type(struct irq_data *data, unsigned int type) return -EINVAL; /* not supported */ } - gpio->irq_type[offset] = new_type; - raw_spin_lock_irqsave(&gpio->spinlock, flags); - gpiic = tqmx86_gpio_read(gpio, TQMX86_GPIIC); - gpiic &= ~((TQMX86_GPII_MASK) << (offset * TQMX86_GPII_BITS)); - gpiic |= new_type << (offset * TQMX86_GPII_BITS); - tqmx86_gpio_write(gpio, gpiic, TQMX86_GPIIC); + gpio->irq_type[offset] &= ~TQMX86_GPII_MASK; + gpio->irq_type[offset] |= new_type; + tqmx86_gpio_irq_config(gpio, offset); raw_spin_unlock_irqrestore(&gpio->spinlock, flags); return 0; -- cgit v1.2.3 From 90dd7de4ef7ba584823dfbeba834c2919a4bb55b Mon Sep 17 00:00:00 2001 From: Matthias Schiffer Date: Thu, 30 May 2024 12:20:02 +0200 Subject: gpio: tqmx86: fix broken IRQ_TYPE_EDGE_BOTH interrupt type The TQMx86 GPIO controller only supports falling and rising edge triggers, but not both. Fix this by implementing a software both-edge mode that toggles the edge type after every interrupt. Fixes: b868db94a6a7 ("gpio: tqmx86: Add GPIO from for this IO controller") Co-developed-by: Gregor Herburger Signed-off-by: Gregor Herburger Signed-off-by: Matthias Schiffer Link: https://lore.kernel.org/r/515324f0491c4d44f4ef49f170354aca002d81ef.1717063994.git.matthias.schiffer@ew.tq-group.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-tqmx86.c | 46 ++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 42 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-tqmx86.c b/drivers/gpio/gpio-tqmx86.c index 7e428c872a25..f2e7e8754d95 100644 --- a/drivers/gpio/gpio-tqmx86.c +++ b/drivers/gpio/gpio-tqmx86.c @@ -32,6 +32,10 @@ #define TQMX86_GPII_NONE 0 #define TQMX86_GPII_FALLING BIT(0) #define TQMX86_GPII_RISING BIT(1) +/* Stored in irq_type as a trigger type, but not actually valid as a register + * value, so the name doesn't use "GPII" + */ +#define TQMX86_INT_BOTH (BIT(0) | BIT(1)) #define TQMX86_GPII_MASK (BIT(0) | BIT(1)) #define TQMX86_GPII_BITS 2 /* Stored in irq_type with GPII bits */ @@ -113,9 +117,15 @@ static void tqmx86_gpio_irq_config(struct tqmx86_gpio_data *gpio, int offset) { u8 type = TQMX86_GPII_NONE, gpiic; - if (gpio->irq_type[offset] & TQMX86_INT_UNMASKED) + if (gpio->irq_type[offset] & TQMX86_INT_UNMASKED) { type = gpio->irq_type[offset] & TQMX86_GPII_MASK; + if (type == TQMX86_INT_BOTH) + type = tqmx86_gpio_get(&gpio->chip, offset + TQMX86_NGPO) + ? TQMX86_GPII_FALLING + : TQMX86_GPII_RISING; + } + gpiic = tqmx86_gpio_read(gpio, TQMX86_GPIIC); gpiic &= ~(TQMX86_GPII_MASK << (offset * TQMX86_GPII_BITS)); gpiic |= type << (offset * TQMX86_GPII_BITS); @@ -169,7 +179,7 @@ static int tqmx86_gpio_irq_set_type(struct irq_data *data, unsigned int type) new_type = TQMX86_GPII_FALLING; break; case IRQ_TYPE_EDGE_BOTH: - new_type = TQMX86_GPII_FALLING | TQMX86_GPII_RISING; + new_type = TQMX86_INT_BOTH; break; default: return -EINVAL; /* not supported */ @@ -189,8 +199,8 @@ static void tqmx86_gpio_irq_handler(struct irq_desc *desc) struct gpio_chip *chip = irq_desc_get_handler_data(desc); struct tqmx86_gpio_data *gpio = gpiochip_get_data(chip); struct irq_chip *irq_chip = irq_desc_get_chip(desc); - unsigned long irq_bits; - int i = 0; + unsigned long irq_bits, flags; + int i; u8 irq_status; chained_irq_enter(irq_chip, desc); @@ -199,6 +209,34 @@ static void tqmx86_gpio_irq_handler(struct irq_desc *desc) tqmx86_gpio_write(gpio, irq_status, TQMX86_GPIIS); irq_bits = irq_status; + + raw_spin_lock_irqsave(&gpio->spinlock, flags); + for_each_set_bit(i, &irq_bits, TQMX86_NGPI) { + /* + * Edge-both triggers are implemented by flipping the edge + * trigger after each interrupt, as the controller only supports + * either rising or falling edge triggers, but not both. + * + * Internally, the TQMx86 GPIO controller has separate status + * registers for rising and falling edge interrupts. GPIIC + * configures which bits from which register are visible in the + * interrupt status register GPIIS and defines what triggers the + * parent IRQ line. Writing to GPIIS always clears both rising + * and falling interrupt flags internally, regardless of the + * currently configured trigger. + * + * In consequence, we can cleanly implement the edge-both + * trigger in software by first clearing the interrupt and then + * setting the new trigger based on the current GPIO input in + * tqmx86_gpio_irq_config() - even if an edge arrives between + * reading the input and setting the trigger, we will have a new + * interrupt pending. + */ + if ((gpio->irq_type[i] & TQMX86_GPII_MASK) == TQMX86_INT_BOTH) + tqmx86_gpio_irq_config(gpio, i); + } + raw_spin_unlock_irqrestore(&gpio->spinlock, flags); + for_each_set_bit(i, &irq_bits, TQMX86_NGPI) generic_handle_domain_irq(gpio->chip.irq.domain, i + TQMX86_NGPO); -- cgit v1.2.3 From 1e24c31351787e24b7eebe84866bd55fd62a0aef Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Fri, 31 May 2024 16:00:04 -0700 Subject: cpufreq: intel_pstate: Fix unchecked HWP MSR access Fix unchecked MSR access error for processors with no HWP support. On such processors, maximum frequency can be changed by the system firmware using ACPI event ACPI_PROCESSOR_NOTIFY_HIGEST_PERF_CHANGED. This results in accessing HWP MSR 0x771. Call Trace: generic_exec_single+0x58/0x120 smp_call_function_single+0xbf/0x110 rdmsrl_on_cpu+0x46/0x60 intel_pstate_get_hwp_cap+0x1b/0x70 intel_pstate_update_limits+0x2a/0x60 acpi_processor_notify+0xb7/0x140 acpi_ev_notify_dispatch+0x3b/0x60 HWP MSR 0x771 can be only read on a CPU which supports HWP and enabled. Hence intel_pstate_get_hwp_cap() can only be called when hwp_active is true. Reported-by: Sebastian Andrzej Siewior Closes: https://lore.kernel.org/linux-pm/20240529155740.Hq2Hw7be@linutronix.de/ Fixes: e8217b4bece3 ("cpufreq: intel_pstate: Update the maximum CPU frequency consistently") Tested-by: Sebastian Andrzej Siewior Signed-off-by: Srinivas Pandruvada Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 4b986c044741..65d3f79104bd 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -1153,7 +1153,8 @@ static void intel_pstate_update_policies(void) static void __intel_pstate_update_max_freq(struct cpudata *cpudata, struct cpufreq_policy *policy) { - intel_pstate_get_hwp_cap(cpudata); + if (hwp_active) + intel_pstate_get_hwp_cap(cpudata); policy->cpuinfo.max_freq = READ_ONCE(global.no_turbo) ? cpudata->pstate.max_freq : cpudata->pstate.turbo_freq; -- cgit v1.2.3 From b97e8a2f7130a4b30d1502003095833d16c028b3 Mon Sep 17 00:00:00 2001 From: Hagar Hemdan Date: Fri, 31 May 2024 16:21:44 +0000 Subject: irqchip/gic-v3-its: Fix potential race condition in its_vlpi_prop_update() its_vlpi_prop_update() calls lpi_write_config() which obtains the mapping information for a VLPI without lock held. So it could race with its_vlpi_unmap(). Since all calls from its_irq_set_vcpu_affinity() require the same lock to be held, hoist the locking there instead of sprinkling the locking all over the place. This bug was discovered using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc. [ tglx: Use guard() instead of goto ] Fixes: 015ec0386ab6 ("irqchip/gic-v3-its: Add VLPI configuration handling") Suggested-by: Marc Zyngier Signed-off-by: Hagar Hemdan Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Reviewed-by: Marc Zyngier Link: https://lore.kernel.org/r/20240531162144.28650-1-hagarhem@amazon.com --- drivers/irqchip/irq-gic-v3-its.c | 44 +++++++++++----------------------------- 1 file changed, 12 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 40ebf1726393..3c755d5dad6e 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -1846,28 +1846,22 @@ static int its_vlpi_map(struct irq_data *d, struct its_cmd_info *info) { struct its_device *its_dev = irq_data_get_irq_chip_data(d); u32 event = its_get_event_id(d); - int ret = 0; if (!info->map) return -EINVAL; - raw_spin_lock(&its_dev->event_map.vlpi_lock); - if (!its_dev->event_map.vm) { struct its_vlpi_map *maps; maps = kcalloc(its_dev->event_map.nr_lpis, sizeof(*maps), GFP_ATOMIC); - if (!maps) { - ret = -ENOMEM; - goto out; - } + if (!maps) + return -ENOMEM; its_dev->event_map.vm = info->map->vm; its_dev->event_map.vlpi_maps = maps; } else if (its_dev->event_map.vm != info->map->vm) { - ret = -EINVAL; - goto out; + return -EINVAL; } /* Get our private copy of the mapping information */ @@ -1899,46 +1893,32 @@ static int its_vlpi_map(struct irq_data *d, struct its_cmd_info *info) its_dev->event_map.nr_vlpis++; } -out: - raw_spin_unlock(&its_dev->event_map.vlpi_lock); - return ret; + return 0; } static int its_vlpi_get(struct irq_data *d, struct its_cmd_info *info) { struct its_device *its_dev = irq_data_get_irq_chip_data(d); struct its_vlpi_map *map; - int ret = 0; - - raw_spin_lock(&its_dev->event_map.vlpi_lock); map = get_vlpi_map(d); - if (!its_dev->event_map.vm || !map) { - ret = -EINVAL; - goto out; - } + if (!its_dev->event_map.vm || !map) + return -EINVAL; /* Copy our mapping information to the incoming request */ *info->map = *map; -out: - raw_spin_unlock(&its_dev->event_map.vlpi_lock); - return ret; + return 0; } static int its_vlpi_unmap(struct irq_data *d) { struct its_device *its_dev = irq_data_get_irq_chip_data(d); u32 event = its_get_event_id(d); - int ret = 0; - - raw_spin_lock(&its_dev->event_map.vlpi_lock); - if (!its_dev->event_map.vm || !irqd_is_forwarded_to_vcpu(d)) { - ret = -EINVAL; - goto out; - } + if (!its_dev->event_map.vm || !irqd_is_forwarded_to_vcpu(d)) + return -EINVAL; /* Drop the virtual mapping */ its_send_discard(its_dev, event); @@ -1962,9 +1942,7 @@ static int its_vlpi_unmap(struct irq_data *d) kfree(its_dev->event_map.vlpi_maps); } -out: - raw_spin_unlock(&its_dev->event_map.vlpi_lock); - return ret; + return 0; } static int its_vlpi_prop_update(struct irq_data *d, struct its_cmd_info *info) @@ -1992,6 +1970,8 @@ static int its_irq_set_vcpu_affinity(struct irq_data *d, void *vcpu_info) if (!is_v4(its_dev->its)) return -EINVAL; + guard(raw_spinlock_irq)(&its_dev->event_map.vlpi_lock); + /* Unmap request? */ if (!info) return its_vlpi_unmap(d); -- cgit v1.2.3 From 18befe4a28403f599115c5ae753cc7f5157af8b7 Mon Sep 17 00:00:00 2001 From: Dumitru Ceclan Date: Thu, 30 May 2024 15:07:52 +0300 Subject: iio: adc: ad7173: Clear append status bit The previous value of the append status bit was not cleared before setting the new value. This caused the bit to remain set after enabling buffered mode for multiple channels and not permit further buffered reads from a single channel after the fact. Fixes: 76a1e6a42802 ("iio: adc: ad7173: add AD7173 driver") Signed-off-by: Dumitru Ceclan Link: https://lore.kernel.org/r/20240530-ad7173-fixes-v3-4-b85f33079e18@analog.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7173.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/iio/adc/ad7173.c b/drivers/iio/adc/ad7173.c index 048127bf979a..e2f17292409c 100644 --- a/drivers/iio/adc/ad7173.c +++ b/drivers/iio/adc/ad7173.c @@ -543,6 +543,7 @@ static int ad7173_append_status(struct ad_sigma_delta *sd, bool append) unsigned int interface_mode = st->interface_mode; int ret; + interface_mode &= ~AD7173_INTERFACE_DATA_STAT; interface_mode |= AD7173_INTERFACE_DATA_STAT_EN(append); ret = ad_sd_write_reg(&st->sd, AD7173_REG_INTERFACE_MODE, 2, interface_mode); if (ret) -- cgit v1.2.3 From 182bc496dc63ca03986e3c393166477f4a4c2742 Mon Sep 17 00:00:00 2001 From: Dumitru Ceclan Date: Thu, 30 May 2024 15:07:53 +0300 Subject: iio: adc: ad7173: Fix sampling frequency setting This patch fixes two issues regarding the sampling frequency setting: -The attribute was set as per device, not per channel. As such, when setting the sampling frequency, the configuration was always done for the slot 0, and the correct configuration was applied on the next channel configuration call by the LRU mechanism. -The LRU implementation does not take into account external settings of the slot registers. When setting the sampling frequency directly to a slot register in write_raw(), there is no guarantee that other channels were not also using that slot and now incorrectly retain their config as live. Set the sampling frequency attribute as separate in the channel templates. Do not set the sampling directly to the slot register in write_raw(), just mark the config as not live and let the LRU mechanism handle it. As the reg variable is no longer used, remove it. Fixes: 76a1e6a42802 ("iio: adc: ad7173: add AD7173 driver") Signed-off-by: Dumitru Ceclan Link: https://lore.kernel.org/r/20240530-ad7173-fixes-v3-5-b85f33079e18@analog.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7173.c | 20 +++++--------------- 1 file changed, 5 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/ad7173.c b/drivers/iio/adc/ad7173.c index e2f17292409c..b26d4575e256 100644 --- a/drivers/iio/adc/ad7173.c +++ b/drivers/iio/adc/ad7173.c @@ -717,7 +717,7 @@ static int ad7173_write_raw(struct iio_dev *indio_dev, { struct ad7173_state *st = iio_priv(indio_dev); struct ad7173_channel_config *cfg; - unsigned int freq, i, reg; + unsigned int freq, i; int ret; ret = iio_device_claim_direct_mode(indio_dev); @@ -733,16 +733,7 @@ static int ad7173_write_raw(struct iio_dev *indio_dev, cfg = &st->channels[chan->address].cfg; cfg->odr = i; - - if (!cfg->live) - break; - - ret = ad_sd_read_reg(&st->sd, AD7173_REG_FILTER(cfg->cfg_slot), 2, ®); - if (ret) - break; - reg &= ~AD7173_FILTER_ODR0_MASK; - reg |= FIELD_PREP(AD7173_FILTER_ODR0_MASK, i); - ret = ad_sd_write_reg(&st->sd, AD7173_REG_FILTER(cfg->cfg_slot), 2, reg); + cfg->live = false; break; default: @@ -804,8 +795,7 @@ static const struct iio_chan_spec ad7173_channel_template = { .type = IIO_VOLTAGE, .indexed = 1, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | - BIT(IIO_CHAN_INFO_SCALE), - .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), + BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ), .scan_type = { .sign = 'u', .realbits = 24, @@ -819,8 +809,8 @@ static const struct iio_chan_spec ad7173_temp_iio_channel_template = { .channel = AD7173_AIN_TEMP_POS, .channel2 = AD7173_AIN_TEMP_NEG, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | - BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET), - .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), + BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SAMP_FREQ), .scan_type = { .sign = 'u', .realbits = 24, -- cgit v1.2.3 From 8844ed0a6e063acf7173b231021b2d301e31ded9 Mon Sep 17 00:00:00 2001 From: Jean-Baptiste Maneyrol Date: Mon, 27 May 2024 15:01:17 +0000 Subject: iio: imu: inv_mpu6050: stabilized timestamping in interrupt Use IRQ ONESHOT flag to ensure the timestamp is not updated in the hard handler during the thread handler. And use a fixed value of 1 sample that correspond to this first timestamp. This way we can ensure the timestamp is always corresponding to the value used by the timestamping mechanism. Otherwise, it is possible that between FIFO count read and FIFO processing the timestamp is overwritten in the hard handler. Fixes: 111e1abd0045 ("iio: imu: inv_mpu6050: use the common inv_sensors timestamp module") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol Link: https://lore.kernel.org/r/20240527150117.608792-1-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron --- drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 4 ++-- drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 1 + 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c index 0dc0f22a5582..3d3b27f28c9d 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c @@ -100,8 +100,8 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) goto end_session; /* Each FIFO data contains all sensors, so same number for FIFO and sensor data */ fifo_period = NSEC_PER_SEC / INV_MPU6050_DIVIDER_TO_FIFO_RATE(st->chip_config.divider); - inv_sensors_timestamp_interrupt(&st->timestamp, nb, pf->timestamp); - inv_sensors_timestamp_apply_odr(&st->timestamp, fifo_period, nb, 0); + inv_sensors_timestamp_interrupt(&st->timestamp, 1, pf->timestamp); + inv_sensors_timestamp_apply_odr(&st->timestamp, fifo_period, 1, 0); /* clear internal data buffer for avoiding kernel data leak */ memset(data, 0, sizeof(data)); diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c index 1b603567ccc8..84273660ca2e 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c @@ -300,6 +300,7 @@ int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev, int irq_type) if (!st->trig) return -ENOMEM; + irq_type |= IRQF_ONESHOT; ret = devm_request_threaded_irq(&indio_dev->dev, st->irq, &inv_mpu6050_interrupt_timestamp, &inv_mpu6050_interrupt_handle, -- cgit v1.2.3 From 78f0dfa64cbd05f381849377a32e0a2f1afe9215 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 30 May 2024 09:44:16 +0200 Subject: iio: inkern: fix channel read regression A recent "cleanup" broke IIO channel read outs and thereby thermal mitigation on the Lenovo ThinkPad X13s by returning zero instead of the expected IIO value type in iio_read_channel_processed_scale(): thermal thermal_zone12: failed to read out thermal zone (-22) Fixes: 3092bde731ca ("iio: inkern: move to the cleanup.h magic") Cc: Nuno Sa Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20240530074416.13697-1-johan+linaro@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/inkern.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c index 52d773261828..485e6fc44a04 100644 --- a/drivers/iio/inkern.c +++ b/drivers/iio/inkern.c @@ -721,7 +721,7 @@ int iio_read_channel_processed_scale(struct iio_channel *chan, int *val, return ret; *val *= scale; - return 0; + return ret; } else { ret = iio_channel_read(chan, val, NULL, IIO_CHAN_INFO_RAW); if (ret < 0) -- cgit v1.2.3 From ffbe335b8d471f79b259e950cb20999700670456 Mon Sep 17 00:00:00 2001 From: Matthias Stocker Date: Fri, 31 May 2024 12:37:11 +0200 Subject: vmxnet3: disable rx data ring on dma allocation failure When vmxnet3_rq_create() fails to allocate memory for rq->data_ring.base, the subsequent call to vmxnet3_rq_destroy_all_rxdataring does not reset rq->data_ring.desc_size for the data ring that failed, which presumably causes the hypervisor to reference it on packet reception. To fix this bug, rq->data_ring.desc_size needs to be set to 0 to tell the hypervisor to disable this feature. [ 95.436876] kernel BUG at net/core/skbuff.c:207! [ 95.439074] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 95.440411] CPU: 7 PID: 0 Comm: swapper/7 Not tainted 6.9.3-dirty #1 [ 95.441558] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 12/12/2018 [ 95.443481] RIP: 0010:skb_panic+0x4d/0x4f [ 95.444404] Code: 4f 70 50 8b 87 c0 00 00 00 50 8b 87 bc 00 00 00 50 ff b7 d0 00 00 00 4c 8b 8f c8 00 00 00 48 c7 c7 68 e8 be 9f e8 63 58 f9 ff <0f> 0b 48 8b 14 24 48 c7 c1 d0 73 65 9f e8 a1 ff ff ff 48 8b 14 24 [ 95.447684] RSP: 0018:ffffa13340274dd0 EFLAGS: 00010246 [ 95.448762] RAX: 0000000000000089 RBX: ffff8fbbc72b02d0 RCX: 000000000000083f [ 95.450148] RDX: 0000000000000000 RSI: 00000000000000f6 RDI: 000000000000083f [ 95.451520] RBP: 000000000000002d R08: 0000000000000000 R09: ffffa13340274c60 [ 95.452886] R10: ffffffffa04ed468 R11: 0000000000000002 R12: 0000000000000000 [ 95.454293] R13: ffff8fbbdab3c2d0 R14: ffff8fbbdbd829e0 R15: ffff8fbbdbd809e0 [ 95.455682] FS: 0000000000000000(0000) GS:ffff8fbeefd80000(0000) knlGS:0000000000000000 [ 95.457178] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 95.458340] CR2: 00007fd0d1f650c8 CR3: 0000000115f28000 CR4: 00000000000406f0 [ 95.459791] Call Trace: [ 95.460515] [ 95.461180] ? __die_body.cold+0x19/0x27 [ 95.462150] ? die+0x2e/0x50 [ 95.462976] ? do_trap+0xca/0x110 [ 95.463973] ? do_error_trap+0x6a/0x90 [ 95.464966] ? skb_panic+0x4d/0x4f [ 95.465901] ? exc_invalid_op+0x50/0x70 [ 95.466849] ? skb_panic+0x4d/0x4f [ 95.467718] ? asm_exc_invalid_op+0x1a/0x20 [ 95.468758] ? skb_panic+0x4d/0x4f [ 95.469655] skb_put.cold+0x10/0x10 [ 95.470573] vmxnet3_rq_rx_complete+0x862/0x11e0 [vmxnet3] [ 95.471853] vmxnet3_poll_rx_only+0x36/0xb0 [vmxnet3] [ 95.473185] __napi_poll+0x2b/0x160 [ 95.474145] net_rx_action+0x2c6/0x3b0 [ 95.475115] handle_softirqs+0xe7/0x2a0 [ 95.476122] __irq_exit_rcu+0x97/0xb0 [ 95.477109] common_interrupt+0x85/0xa0 [ 95.478102] [ 95.478846] [ 95.479603] asm_common_interrupt+0x26/0x40 [ 95.480657] RIP: 0010:pv_native_safe_halt+0xf/0x20 [ 95.481801] Code: 22 d7 e9 54 87 01 00 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa eb 07 0f 00 2d 93 ba 3b 00 fb f4 2c 87 01 00 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 [ 95.485563] RSP: 0018:ffffa133400ffe58 EFLAGS: 00000246 [ 95.486882] RAX: 0000000000004000 RBX: ffff8fbbc1d14064 RCX: 0000000000000000 [ 95.488477] RDX: ffff8fbeefd80000 RSI: ffff8fbbc1d14000 RDI: 0000000000000001 [ 95.490067] RBP: ffff8fbbc1d14064 R08: ffffffffa0652260 R09: 00000000000010d3 [ 95.491683] R10: 0000000000000018 R11: ffff8fbeefdb4764 R12: ffffffffa0652260 [ 95.493389] R13: ffffffffa06522e0 R14: 0000000000000001 R15: 0000000000000000 [ 95.495035] acpi_safe_halt+0x14/0x20 [ 95.496127] acpi_idle_do_entry+0x2f/0x50 [ 95.497221] acpi_idle_enter+0x7f/0xd0 [ 95.498272] cpuidle_enter_state+0x81/0x420 [ 95.499375] cpuidle_enter+0x2d/0x40 [ 95.500400] do_idle+0x1e5/0x240 [ 95.501385] cpu_startup_entry+0x29/0x30 [ 95.502422] start_secondary+0x11c/0x140 [ 95.503454] common_startup_64+0x13e/0x141 [ 95.504466] [ 95.505197] Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 rfkill ip_set nf_tables vsock_loopback vmw_vsock_virtio_transport_common qrtr vmw_vsock_vmci_transport vsock sunrpc binfmt_misc pktcdvd vmw_balloon pcspkr vmw_vmci i2c_piix4 joydev loop dm_multipath nfnetlink zram crct10dif_pclmul crc32_pclmul vmwgfx crc32c_intel polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 sha256_ssse3 vmxnet3 sha1_ssse3 drm_ttm_helper vmw_pvscsi ttm ata_generic pata_acpi serio_raw scsi_dh_rdac scsi_dh_emc scsi_dh_alua ip6_tables ip_tables fuse [ 95.516536] ---[ end trace 0000000000000000 ]--- Fixes: 6f4833383e85 ("net: vmxnet3: Fix NULL pointer dereference in vmxnet3_rq_rx_complete()") Signed-off-by: Matthias Stocker Reviewed-by: Subbaraya Sundeep Reviewed-by: Ronak Doshi Link: https://lore.kernel.org/r/20240531103711.101961-1-mstocker@barracuda.com Signed-off-by: Jakub Kicinski --- drivers/net/vmxnet3/vmxnet3_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 89ca6e75fcc6..63822d454c00 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -2034,8 +2034,8 @@ vmxnet3_rq_destroy_all_rxdataring(struct vmxnet3_adapter *adapter) rq->data_ring.base, rq->data_ring.basePA); rq->data_ring.base = NULL; - rq->data_ring.desc_size = 0; } + rq->data_ring.desc_size = 0; } } -- cgit v1.2.3 From 4aa2dcfbad538adf7becd0034a3754e1bd01b2b5 Mon Sep 17 00:00:00 2001 From: Nikita Zhandarovich Date: Fri, 17 May 2024 07:19:14 -0700 Subject: HID: core: remove unnecessary WARN_ON() in implement() Syzkaller hit a warning [1] in a call to implement() when trying to write a value into a field of smaller size in an output report. Since implement() already has a warn message printed out with the help of hid_warn() and value in question gets trimmed with: ... value &= m; ... WARN_ON may be considered superfluous. Remove it to suppress future syzkaller triggers. [1] WARNING: CPU: 0 PID: 5084 at drivers/hid/hid-core.c:1451 implement drivers/hid/hid-core.c:1451 [inline] WARNING: CPU: 0 PID: 5084 at drivers/hid/hid-core.c:1451 hid_output_report+0x548/0x760 drivers/hid/hid-core.c:1863 Modules linked in: CPU: 0 PID: 5084 Comm: syz-executor424 Not tainted 6.9.0-rc7-syzkaller-00183-gcf87f46fd34d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 RIP: 0010:implement drivers/hid/hid-core.c:1451 [inline] RIP: 0010:hid_output_report+0x548/0x760 drivers/hid/hid-core.c:1863 ... Call Trace: __usbhid_submit_report drivers/hid/usbhid/hid-core.c:591 [inline] usbhid_submit_report+0x43d/0x9e0 drivers/hid/usbhid/hid-core.c:636 hiddev_ioctl+0x138b/0x1f00 drivers/hid/usbhid/hiddev.c:726 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:890 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Fixes: 95d1c8951e5b ("HID: simplify implement() a bit") Reported-by: Suggested-by: Alan Stern Signed-off-by: Nikita Zhandarovich Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index b1fa0378e8f4..74efda212c55 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1448,7 +1448,6 @@ static void implement(const struct hid_device *hid, u8 *report, hid_warn(hid, "%s() called with too large value %d (n: %d)! (%s)\n", __func__, value, n, current->comm); - WARN_ON(1); value &= m; } } -- cgit v1.2.3 From 3ec8ebd8a5b782d56347ae884de880af26f93996 Mon Sep 17 00:00:00 2001 From: Ilpo Järvinen Date: Mon, 27 May 2024 16:22:34 +0300 Subject: EDAC/amd64: Convert PCIBIOS_* return codes to errnos MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit gpu_get_node_map() uses pci_read_config_dword() that returns PCIBIOS_* codes. The return code is then returned all the way into the module init function amd64_edac_init() that returns it as is. The module init functions, however, should return normal errnos. Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal errno before returning it from gpu_get_node_map(). For consistency, convert also the other similar cases which return PCIBIOS_* codes even if they do not have any bugs at the moment. Fixes: 4251566ebc1c ("EDAC/amd64: Cache and use GPU node map") Signed-off-by: Ilpo Järvinen Signed-off-by: Borislav Petkov (AMD) Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240527132236.13875-1-ilpo.jarvinen@linux.intel.com --- drivers/edac/amd64_edac.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 1f3520d76861..a17f3c0cdfa6 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -81,7 +81,7 @@ int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset, amd64_warn("%s: error reading F%dx%03x.\n", func, PCI_FUNC(pdev->devfn), offset); - return err; + return pcibios_err_to_errno(err); } int __amd64_write_pci_cfg_dword(struct pci_dev *pdev, int offset, @@ -94,7 +94,7 @@ int __amd64_write_pci_cfg_dword(struct pci_dev *pdev, int offset, amd64_warn("%s: error writing to F%dx%03x.\n", func, PCI_FUNC(pdev->devfn), offset); - return err; + return pcibios_err_to_errno(err); } /* @@ -1025,8 +1025,10 @@ static int gpu_get_node_map(struct amd64_pvt *pvt) } ret = pci_read_config_dword(pdev, REG_LOCAL_NODE_TYPE_MAP, &tmp); - if (ret) + if (ret) { + ret = pcibios_err_to_errno(ret); goto out; + } gpu_node_map.node_count = FIELD_GET(LNTM_NODE_COUNT, tmp); gpu_node_map.base_node_id = FIELD_GET(LNTM_BASE_NODE_ID, tmp); -- cgit v1.2.3 From f8367a74aebf88dc8b58a0db6a6c90b4cb8fc9d3 Mon Sep 17 00:00:00 2001 From: Ilpo Järvinen Date: Mon, 27 May 2024 16:22:35 +0300 Subject: EDAC/igen6: Convert PCIBIOS_* return codes to errnos MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit errcmd_enable_error_reporting() uses pci_{read,write}_config_word() that return PCIBIOS_* codes. The return code is then returned all the way into the probe function igen6_probe() that returns it as is. The probe functions, however, should return normal errnos. Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal errno before returning it from errcmd_enable_error_reporting(). Fixes: 10590a9d4f23 ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC") Signed-off-by: Ilpo Järvinen Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Qiuxu Zhuo Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240527132236.13875-2-ilpo.jarvinen@linux.intel.com --- drivers/edac/igen6_edac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/edac/igen6_edac.c b/drivers/edac/igen6_edac.c index cdd8480e7368..dbe9fe5f2ca6 100644 --- a/drivers/edac/igen6_edac.c +++ b/drivers/edac/igen6_edac.c @@ -800,7 +800,7 @@ static int errcmd_enable_error_reporting(bool enable) rc = pci_read_config_word(imc->pdev, ERRCMD_OFFSET, &errcmd); if (rc) - return rc; + return pcibios_err_to_errno(rc); if (enable) errcmd |= ERRCMD_CE | ERRSTS_UE; @@ -809,7 +809,7 @@ static int errcmd_enable_error_reporting(bool enable) rc = pci_write_config_word(imc->pdev, ERRCMD_OFFSET, errcmd); if (rc) - return rc; + return pcibios_err_to_errno(rc); return 0; } -- cgit v1.2.3 From c3552ab19aeb8101b751e7c7ad45deab9e1134e1 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Fri, 24 May 2024 17:15:42 +0200 Subject: staging: vchiq_debugfs: Fix NPD in vchiq_dump_state The commit 42a2f6664e18 ("staging: vc04_services: Move global g_state to vchiq_state") falsely assumed that the debugfs entry vchiq/state was created with vchiq_instance as data. This causes now a NULL pointer derefence while trying to dump the vchiq state. So fix this by passing vchiq_state as data, because this is the relevant part here. Fixes: 42a2f6664e18 ("staging: vc04_services: Move global g_state to vchiq_state") Signed-off-by: Stefan Wahren Reviewed-by: Umang Jain Link: https://lore.kernel.org/r/20240524151542.19415-1-wahrenst@gmx.net Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c | 2 +- drivers/staging/vc04_services/interface/vchiq_arm/vchiq_debugfs.c | 8 ++++---- drivers/staging/vc04_services/interface/vchiq_arm/vchiq_debugfs.h | 2 +- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c index 297af1d80b12..69daeba974f2 100644 --- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c @@ -1759,7 +1759,7 @@ static int vchiq_probe(struct platform_device *pdev) if (err) goto failed_platform_init; - vchiq_debugfs_init(); + vchiq_debugfs_init(&mgmt->state); dev_dbg(&pdev->dev, "arm: platform initialised - version %d (min %d)\n", VCHIQ_VERSION, VCHIQ_VERSION_MIN); diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_debugfs.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_debugfs.c index 54e7bf029d9a..1f74d0bb33ba 100644 --- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_debugfs.c +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_debugfs.c @@ -42,9 +42,9 @@ static int debugfs_trace_show(struct seq_file *f, void *offset) static int vchiq_dump_show(struct seq_file *f, void *offset) { - struct vchiq_instance *instance = f->private; + struct vchiq_state *state = f->private; - vchiq_dump_state(f, instance->state); + vchiq_dump_state(f, state); return 0; } @@ -121,12 +121,12 @@ void vchiq_debugfs_remove_instance(struct vchiq_instance *instance) debugfs_remove_recursive(node->dentry); } -void vchiq_debugfs_init(void) +void vchiq_debugfs_init(struct vchiq_state *state) { vchiq_dbg_dir = debugfs_create_dir("vchiq", NULL); vchiq_dbg_clients = debugfs_create_dir("clients", vchiq_dbg_dir); - debugfs_create_file("state", S_IFREG | 0444, vchiq_dbg_dir, NULL, + debugfs_create_file("state", S_IFREG | 0444, vchiq_dbg_dir, state, &vchiq_dump_fops); } diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_debugfs.h b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_debugfs.h index e9bf055a4ca9..fabffd81b1ec 100644 --- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_debugfs.h +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_debugfs.h @@ -10,7 +10,7 @@ struct vchiq_debugfs_node { struct dentry *dentry; }; -void vchiq_debugfs_init(void); +void vchiq_debugfs_init(struct vchiq_state *state); void vchiq_debugfs_deinit(void); -- cgit v1.2.3 From a295ec52c8624883885396fde7b4df1a179627c3 Mon Sep 17 00:00:00 2001 From: "Kun(llfl)" Date: Thu, 9 May 2024 08:42:20 +0800 Subject: iommu/amd: Fix sysfs leak in iommu init During the iommu initialization, iommu_init_pci() adds sysfs nodes. However, these nodes aren't remove in free_iommu_resources() subsequently. Fixes: 39ab9555c241 ("iommu: Add sysfs bindings for struct iommu_device") Signed-off-by: Kun(llfl) Reviewed-by: Suravee Suthikulpanit Link: https://lore.kernel.org/r/c8e0d11c6ab1ee48299c288009cf9c5dae07b42d.1715215003.git.llfl@linux.alibaba.com Signed-off-by: Joerg Roedel --- drivers/iommu/amd/init.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c index a18e74878f68..27e293727095 100644 --- a/drivers/iommu/amd/init.c +++ b/drivers/iommu/amd/init.c @@ -1626,8 +1626,17 @@ static void __init free_pci_segments(void) } } +static void __init free_sysfs(struct amd_iommu *iommu) +{ + if (iommu->iommu.dev) { + iommu_device_unregister(&iommu->iommu); + iommu_device_sysfs_remove(&iommu->iommu); + } +} + static void __init free_iommu_one(struct amd_iommu *iommu) { + free_sysfs(iommu); free_cwwb_sem(iommu); free_command_buffer(iommu); free_event_buffer(iommu); -- cgit v1.2.3 From cc8d89d0637990c66440a226f443d95340979a04 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Mon, 20 May 2024 20:14:44 +0100 Subject: iommu/dma: Fix domain init Despite carefully rewording the kerneldoc to describe the new direct interaction with dma_range_map, it seems I managed to confuse myself in removing the redundant force_aperture check and ended up making the code not do that at all. This led to dma_range_maps inadvertently being able to set iovad->start_pfn = 0, and all the nonsensical chaos which ensues from there. Restore the correct behaviour of constraining base_pfn to the domain aperture regardless of dma_range_map, and not trying to apply dma_range_map constraints to the basic IOVA domain since they will be properly handled with reserved regions later. Reported-by: Jon Hunter Reported-by: Jerry Snitselaar Fixes: ad4750b07d34 ("iommu/dma: Make limit checks self-contained") Signed-off-by: Robin Murphy Tested-by: Jerry Snitselaar Reviewed-by: Jerry Snitselaar Link: https://lore.kernel.org/r/721fa6baebb0924aa40db0b8fb86bcb4538434af.1716232484.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel --- drivers/iommu/dma-iommu.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c index f731e4b2a417..43520e7275cc 100644 --- a/drivers/iommu/dma-iommu.c +++ b/drivers/iommu/dma-iommu.c @@ -686,15 +686,15 @@ static int iommu_dma_init_domain(struct iommu_domain *domain, struct device *dev /* Check the domain allows at least some access to the device... */ if (map) { - dma_addr_t base = dma_range_map_min(map); - if (base > domain->geometry.aperture_end || + if (dma_range_map_min(map) > domain->geometry.aperture_end || dma_range_map_max(map) < domain->geometry.aperture_start) { pr_warn("specified DMA range outside IOMMU capability\n"); return -EFAULT; } - /* ...then finally give it a kicking to make sure it fits */ - base_pfn = max(base, domain->geometry.aperture_start) >> order; } + /* ...then finally give it a kicking to make sure it fits */ + base_pfn = max_t(unsigned long, base_pfn, + domain->geometry.aperture_start >> order); /* start_pfn is always nonzero for an already-initialised domain */ mutex_lock(&cookie->mutex); -- cgit v1.2.3 From 998a0a362b0b4cf501161c3319e6994d37c45a8c Mon Sep 17 00:00:00 2001 From: Vasant Hegde Date: Wed, 29 May 2024 11:39:00 +0000 Subject: iommu/amd: Fix workqueue name Workqueue name length is crossing WQ_NAME_LEN limit. Fix it by changing name format. New format : "iopf_queue/amdvi-" kernel warning: [ 11.146912] workqueue: name exceeds WQ_NAME_LEN. Truncating to: iopf_queue/amdiommu-0xc002-iopf Reported-by: Borislav Petkov Fixes: 61928bab9d26 ("iommu/amd: Define per-IOMMU iopf_queue") Signed-off-by: Vasant Hegde Acked-by: Borislav Petkov (AMD) Link: https://lore.kernel.org/r/20240529113900.5798-1-vasant.hegde@amd.com Signed-off-by: Joerg Roedel --- drivers/iommu/amd/ppr.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iommu/amd/ppr.c b/drivers/iommu/amd/ppr.c index 091423bb8aac..31d98a2a11a6 100644 --- a/drivers/iommu/amd/ppr.c +++ b/drivers/iommu/amd/ppr.c @@ -222,8 +222,7 @@ int amd_iommu_iopf_init(struct amd_iommu *iommu) if (iommu->iopf_queue) return ret; - snprintf(iommu->iopfq_name, sizeof(iommu->iopfq_name), - "amdiommu-%#x-iopfq", + snprintf(iommu->iopfq_name, sizeof(iommu->iopfq_name), "amdvi-%#x", PCI_SEG_DEVID_TO_SBDF(iommu->pci_seg->id, iommu->devid)); iommu->iopf_queue = iopf_queue_alloc(iommu->iopfq_name); -- cgit v1.2.3 From 48dc345a23b984c457d1c5878168d026c500618f Mon Sep 17 00:00:00 2001 From: Vasant Hegde Date: Thu, 30 May 2024 07:11:18 +0000 Subject: iommu/amd: Check EFR[EPHSup] bit before enabling PPR Check for EFR[EPHSup] bit before enabling PPR. This bit must be set to enable PPR. Reported-by: Borislav Petkov Fixes: c4cb23111103 ("iommu/amd: Add support for enable/disable IOPF") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218900 Tested-by: Borislav Petkov Tested-by: Jean-Christophe Guillain Signed-off-by: Vasant Hegde Reviewed-by: Suravee Suthikulpanit Link: https://lore.kernel.org/r/20240530071118.10297-1-vasant.hegde@amd.com Signed-off-by: Joerg Roedel --- drivers/iommu/amd/amd_iommu.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iommu/amd/amd_iommu.h b/drivers/iommu/amd/amd_iommu.h index 2fde1302a584..2d5945c982bd 100644 --- a/drivers/iommu/amd/amd_iommu.h +++ b/drivers/iommu/amd/amd_iommu.h @@ -129,7 +129,8 @@ static inline int check_feature_gpt_level(void) static inline bool amd_iommu_gt_ppr_supported(void) { return (check_feature(FEATURE_GT) && - check_feature(FEATURE_PPR)); + check_feature(FEATURE_PPR) && + check_feature(FEATURE_EPHSUP)); } static inline u64 iommu_virt_to_phys(void *vaddr) -- cgit v1.2.3 From 526606b0a1998b0791b42c199d53550c3ba724b5 Mon Sep 17 00:00:00 2001 From: Vasant Hegde Date: Thu, 30 May 2024 08:48:01 +0000 Subject: iommu/amd: Fix Invalid wait context issue With commit c4cb23111103 ("iommu/amd: Add support for enable/disable IOPF") we are hitting below issue. This happens because in IOPF enablement path it holds spin lock with irq disable and then tries to take mutex lock. dmesg: ----- [ 0.938739] ============================= [ 0.938740] [ BUG: Invalid wait context ] [ 0.938742] 6.10.0-rc1+ #1 Not tainted [ 0.938745] ----------------------------- [ 0.938746] swapper/0/1 is trying to lock: [ 0.938748] ffffffff8c9f01d8 (&port_lock_key){....}-{3:3}, at: serial8250_console_write+0x78/0x4a0 [ 0.938767] other info that might help us debug this: [ 0.938768] context-{5:5} [ 0.938769] 7 locks held by swapper/0/1: [ 0.938772] #0: ffff888101a91310 (&group->mutex){+.+.}-{4:4}, at: bus_iommu_probe+0x70/0x160 [ 0.938790] #1: ffff888101d1f1b8 (&domain->lock){....}-{3:3}, at: amd_iommu_attach_device+0xa5/0x700 [ 0.938799] #2: ffff888101cc3d18 (&dev_data->lock){....}-{3:3}, at: amd_iommu_attach_device+0xc5/0x700 [ 0.938806] #3: ffff888100052830 (&iommu->lock){....}-{2:2}, at: amd_iommu_iopf_add_device+0x3f/0xa0 [ 0.938813] #4: ffffffff8945a340 (console_lock){+.+.}-{0:0}, at: _printk+0x48/0x50 [ 0.938822] #5: ffffffff8945a390 (console_srcu){....}-{0:0}, at: console_flush_all+0x58/0x4e0 [ 0.938867] #6: ffffffff82459f80 (console_owner){....}-{0:0}, at: console_flush_all+0x1f0/0x4e0 [ 0.938872] stack backtrace: [ 0.938874] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.10.0-rc1+ #1 [ 0.938877] Hardware name: HP HP EliteBook 745 G3/807E, BIOS N73 Ver. 01.39 04/16/2019 Fix above issue by re-arranging code in attach device path: - move device PASID/IOPF enablement outside lock in AMD IOMMU driver. This is safe as core layer holds group->mutex lock before calling iommu_ops->attach_dev. Reported-by: Borislav Petkov Reported-by: Mikhail Gavrilov Reported-by: Chris Bainbridge Fixes: c4cb23111103 ("iommu/amd: Add support for enable/disable IOPF") Tested-by: Borislav Petkov Tested-by: Chris Bainbridge Tested-by: Mikhail Gavrilov Signed-off-by: Vasant Hegde Link: https://lore.kernel.org/r/20240530084801.10758-1-vasant.hegde@amd.com Signed-off-by: Joerg Roedel --- drivers/iommu/amd/iommu.c | 48 +++++++++++++++++++++++------------------------ drivers/iommu/amd/ppr.c | 22 ++++------------------ 2 files changed, 28 insertions(+), 42 deletions(-) (limited to 'drivers') diff --git a/drivers/iommu/amd/iommu.c b/drivers/iommu/amd/iommu.c index 52d83730a22a..c2703599bb16 100644 --- a/drivers/iommu/amd/iommu.c +++ b/drivers/iommu/amd/iommu.c @@ -2032,7 +2032,6 @@ static int do_attach(struct iommu_dev_data *dev_data, struct protection_domain *domain) { struct amd_iommu *iommu = get_amd_iommu_from_dev_data(dev_data); - struct pci_dev *pdev; int ret = 0; /* Update data structures */ @@ -2047,30 +2046,13 @@ static int do_attach(struct iommu_dev_data *dev_data, domain->dev_iommu[iommu->index] += 1; domain->dev_cnt += 1; - pdev = dev_is_pci(dev_data->dev) ? to_pci_dev(dev_data->dev) : NULL; + /* Setup GCR3 table */ if (pdom_is_sva_capable(domain)) { ret = init_gcr3_table(dev_data, domain); if (ret) return ret; - - if (pdev) { - pdev_enable_caps(pdev); - - /* - * Device can continue to function even if IOPF - * enablement failed. Hence in error path just - * disable device PRI support. - */ - if (amd_iommu_iopf_add_device(iommu, dev_data)) - pdev_disable_cap_pri(pdev); - } - } else if (pdev) { - pdev_enable_cap_ats(pdev); } - /* Update device table */ - amd_iommu_dev_update_dte(dev_data, true); - return ret; } @@ -2163,6 +2145,11 @@ static void detach_device(struct device *dev) do_detach(dev_data); +out: + spin_unlock(&dev_data->lock); + + spin_unlock_irqrestore(&domain->lock, flags); + /* Remove IOPF handler */ if (ppr) amd_iommu_iopf_remove_device(iommu, dev_data); @@ -2170,10 +2157,6 @@ static void detach_device(struct device *dev) if (dev_is_pci(dev)) pdev_disable_caps(to_pci_dev(dev)); -out: - spin_unlock(&dev_data->lock); - - spin_unlock_irqrestore(&domain->lock, flags); } static struct iommu_device *amd_iommu_probe_device(struct device *dev) @@ -2485,6 +2468,7 @@ static int amd_iommu_attach_device(struct iommu_domain *dom, struct iommu_dev_data *dev_data = dev_iommu_priv_get(dev); struct protection_domain *domain = to_pdomain(dom); struct amd_iommu *iommu = get_amd_iommu_from_dev(dev); + struct pci_dev *pdev; int ret; /* @@ -2517,7 +2501,23 @@ static int amd_iommu_attach_device(struct iommu_domain *dom, } #endif - iommu_completion_wait(iommu); + pdev = dev_is_pci(dev_data->dev) ? to_pci_dev(dev_data->dev) : NULL; + if (pdev && pdom_is_sva_capable(domain)) { + pdev_enable_caps(pdev); + + /* + * Device can continue to function even if IOPF + * enablement failed. Hence in error path just + * disable device PRI support. + */ + if (amd_iommu_iopf_add_device(iommu, dev_data)) + pdev_disable_cap_pri(pdev); + } else if (pdev) { + pdev_enable_cap_ats(pdev); + } + + /* Update device table */ + amd_iommu_dev_update_dte(dev_data, true); return ret; } diff --git a/drivers/iommu/amd/ppr.c b/drivers/iommu/amd/ppr.c index 31d98a2a11a6..7c67d69f0b8c 100644 --- a/drivers/iommu/amd/ppr.c +++ b/drivers/iommu/amd/ppr.c @@ -248,40 +248,26 @@ void amd_iommu_page_response(struct device *dev, struct iopf_fault *evt, int amd_iommu_iopf_add_device(struct amd_iommu *iommu, struct iommu_dev_data *dev_data) { - unsigned long flags; int ret = 0; if (!dev_data->pri_enabled) return ret; - raw_spin_lock_irqsave(&iommu->lock, flags); - - if (!iommu->iopf_queue) { - ret = -EINVAL; - goto out_unlock; - } + if (!iommu->iopf_queue) + return -EINVAL; ret = iopf_queue_add_device(iommu->iopf_queue, dev_data->dev); if (ret) - goto out_unlock; + return ret; dev_data->ppr = true; - -out_unlock: - raw_spin_unlock_irqrestore(&iommu->lock, flags); - return ret; + return 0; } /* Its assumed that caller has verified that device was added to iopf queue */ void amd_iommu_iopf_remove_device(struct amd_iommu *iommu, struct iommu_dev_data *dev_data) { - unsigned long flags; - - raw_spin_lock_irqsave(&iommu->lock, flags); - iopf_queue_remove_device(iommu->iopf_queue, dev_data->dev); dev_data->ppr = false; - - raw_spin_unlock_irqrestore(&iommu->lock, flags); } -- cgit v1.2.3 From b19ab7ee2c4c1ec5f27c18413c3ab63907f7d55c Mon Sep 17 00:00:00 2001 From: Ilpo Järvinen Date: Tue, 14 May 2024 17:04:29 +0300 Subject: tty: n_tty: Fix buffer offsets when lookahead is used MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When lookahead has "consumed" some characters (la_count > 0), n_tty_receive_buf_standard() and n_tty_receive_buf_closing() for characters beyond the la_count are given wrong cp/fp offsets which leads to duplicating and losing some characters. If la_count > 0, correct buffer pointers and make count consistent too (the latter is not strictly necessary to fix the issue but seems more logical to adjust all variables immediately to keep state consistent). Reported-by: Vadym Krevs Fixes: 6bb6fa6908eb ("tty: Implement lookahead to process XON/XOFF timely") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218834 Tested-by: Vadym Krevs Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20240514140429.12087-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_tty.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index f252d0b5a434..5e9ca4376d68 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1619,15 +1619,25 @@ static void __receive_buf(struct tty_struct *tty, const u8 *cp, const u8 *fp, else if (ldata->raw || (L_EXTPROC(tty) && !preops)) n_tty_receive_buf_raw(tty, cp, fp, count); else if (tty->closing && !L_EXTPROC(tty)) { - if (la_count > 0) + if (la_count > 0) { n_tty_receive_buf_closing(tty, cp, fp, la_count, true); - if (count > la_count) - n_tty_receive_buf_closing(tty, cp, fp, count - la_count, false); + cp += la_count; + if (fp) + fp += la_count; + count -= la_count; + } + if (count > 0) + n_tty_receive_buf_closing(tty, cp, fp, count, false); } else { - if (la_count > 0) + if (la_count > 0) { n_tty_receive_buf_standard(tty, cp, fp, la_count, true); - if (count > la_count) - n_tty_receive_buf_standard(tty, cp, fp, count - la_count, false); + cp += la_count; + if (fp) + fp += la_count; + count -= la_count; + } + if (count > 0) + n_tty_receive_buf_standard(tty, cp, fp, count, false); flush_echoes(tty); if (tty->ops->flush_chars) -- cgit v1.2.3 From 87d80bfbd577912462061b1a45c0ed9c7fcb872f Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 14 May 2024 22:05:53 +0300 Subject: serial: 8250_dw: Don't use struct dw8250_data outside of 8250_dw The container of the struct dw8250_port_data is private to the actual driver. In particular, 8250_lpss and 8250_dw use different data types that are assigned to the UART port private_data. Hence, it must not be used outside the specific driver. Currently the only cpr_val is required by the common code, make it be available via struct dw8250_port_data. This fixes the UART breakage on Intel Galileo boards. Fixes: 593dea000bc1 ("serial: 8250: dw: Allow to use a fallback CPR value if not synthesized") Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240514190730.2787071-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_dw.c | 9 +++++++-- drivers/tty/serial/8250/8250_dwlib.c | 3 +-- drivers/tty/serial/8250/8250_dwlib.h | 3 ++- 3 files changed, 10 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index ba9f4dc4e71d..667e16897bde 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -55,6 +55,7 @@ #define DW_UART_QUIRK_SKIP_SET_RATE BIT(2) #define DW_UART_QUIRK_IS_DMA_FC BIT(3) #define DW_UART_QUIRK_APMC0D08 BIT(4) +#define DW_UART_QUIRK_CPR_VALUE BIT(5) static inline struct dw8250_data *clk_to_dw8250_data(struct notifier_block *nb) { @@ -432,6 +433,10 @@ static void dw8250_prepare_rx_dma(struct uart_8250_port *p) static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data) { unsigned int quirks = data->pdata ? data->pdata->quirks : 0; + u32 cpr_value = data->pdata ? data->pdata->cpr_value : 0; + + if (quirks & DW_UART_QUIRK_CPR_VALUE) + data->data.cpr_value = cpr_value; #ifdef CONFIG_64BIT if (quirks & DW_UART_QUIRK_OCTEON) { @@ -714,8 +719,8 @@ static const struct dw8250_platform_data dw8250_armada_38x_data = { static const struct dw8250_platform_data dw8250_renesas_rzn1_data = { .usr_reg = DW_UART_USR, - .cpr_val = 0x00012f32, - .quirks = DW_UART_QUIRK_IS_DMA_FC, + .cpr_value = 0x00012f32, + .quirks = DW_UART_QUIRK_CPR_VALUE | DW_UART_QUIRK_IS_DMA_FC, }; static const struct dw8250_platform_data dw8250_starfive_jh7100_data = { diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c index 3e33ddf7bc80..5a2520943dfd 100644 --- a/drivers/tty/serial/8250/8250_dwlib.c +++ b/drivers/tty/serial/8250/8250_dwlib.c @@ -242,7 +242,6 @@ static const struct serial_rs485 dw8250_rs485_supported = { void dw8250_setup_port(struct uart_port *p) { struct dw8250_port_data *pd = p->private_data; - struct dw8250_data *data = to_dw8250_data(pd); struct uart_8250_port *up = up_to_u8250p(p); u32 reg, old_dlf; @@ -278,7 +277,7 @@ void dw8250_setup_port(struct uart_port *p) reg = dw8250_readl_ext(p, DW_UART_CPR); if (!reg) { - reg = data->pdata->cpr_val; + reg = pd->cpr_value; dev_dbg(p->dev, "CPR is not available, using 0x%08x instead\n", reg); } if (!reg) diff --git a/drivers/tty/serial/8250/8250_dwlib.h b/drivers/tty/serial/8250/8250_dwlib.h index f13e91f2cace..794a9014cdac 100644 --- a/drivers/tty/serial/8250/8250_dwlib.h +++ b/drivers/tty/serial/8250/8250_dwlib.h @@ -19,6 +19,7 @@ struct dw8250_port_data { struct uart_8250_dma dma; /* Hardware configuration */ + u32 cpr_value; u8 dlf_size; /* RS485 variables */ @@ -27,7 +28,7 @@ struct dw8250_port_data { struct dw8250_platform_data { u8 usr_reg; - u32 cpr_val; + u32 cpr_value; unsigned int quirks; }; -- cgit v1.2.3 From 2c94512055f362dd789e0f87b8566feeddec83c9 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 14 May 2024 22:05:54 +0300 Subject: serial: 8250_dw: Revert "Move definitions to the shared header" This reverts commit d9666dfb314e1ffd6eb9c3c4243fe3e094c047a7. The container of the struct dw8250_port_data is private to the actual driver. In particular, 8250_lpss and 8250_dw use different data types that are assigned to the UART port private_data. Hence, it must not be used outside the specific driver. Fix the mistake made in the past by moving the respective definitions to the specific driver. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240514190730.2787071-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_dw.c | 27 +++++++++++++++++++++++++++ drivers/tty/serial/8250/8250_dwlib.h | 32 -------------------------------- 2 files changed, 27 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 667e16897bde..fb809e32c6ae 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -57,6 +57,33 @@ #define DW_UART_QUIRK_APMC0D08 BIT(4) #define DW_UART_QUIRK_CPR_VALUE BIT(5) +struct dw8250_platform_data { + u8 usr_reg; + u32 cpr_value; + unsigned int quirks; +}; + +struct dw8250_data { + struct dw8250_port_data data; + const struct dw8250_platform_data *pdata; + + int msr_mask_on; + int msr_mask_off; + struct clk *clk; + struct clk *pclk; + struct notifier_block clk_notifier; + struct work_struct clk_work; + struct reset_control *rst; + + unsigned int skip_autocfg:1; + unsigned int uart_16550_compatible:1; +}; + +static inline struct dw8250_data *to_dw8250_data(struct dw8250_port_data *data) +{ + return container_of(data, struct dw8250_data, data); +} + static inline struct dw8250_data *clk_to_dw8250_data(struct notifier_block *nb) { return container_of(nb, struct dw8250_data, clk_notifier); diff --git a/drivers/tty/serial/8250/8250_dwlib.h b/drivers/tty/serial/8250/8250_dwlib.h index 794a9014cdac..7dd2a8e7b780 100644 --- a/drivers/tty/serial/8250/8250_dwlib.h +++ b/drivers/tty/serial/8250/8250_dwlib.h @@ -2,15 +2,10 @@ /* Synopsys DesignWare 8250 library header file. */ #include -#include #include -#include #include "8250.h" -struct clk; -struct reset_control; - struct dw8250_port_data { /* Port properties */ int line; @@ -26,36 +21,9 @@ struct dw8250_port_data { bool hw_rs485_support; }; -struct dw8250_platform_data { - u8 usr_reg; - u32 cpr_value; - unsigned int quirks; -}; - -struct dw8250_data { - struct dw8250_port_data data; - const struct dw8250_platform_data *pdata; - - int msr_mask_on; - int msr_mask_off; - struct clk *clk; - struct clk *pclk; - struct notifier_block clk_notifier; - struct work_struct clk_work; - struct reset_control *rst; - - unsigned int skip_autocfg:1; - unsigned int uart_16550_compatible:1; -}; - void dw8250_do_set_termios(struct uart_port *p, struct ktermios *termios, const struct ktermios *old); void dw8250_setup_port(struct uart_port *p); -static inline struct dw8250_data *to_dw8250_data(struct dw8250_port_data *data) -{ - return container_of(data, struct dw8250_data, data); -} - static inline u32 dw8250_readl_ext(struct uart_port *p, int offset) { if (p->iotype == UPIO_MEM32BE) -- cgit v1.2.3 From 5208e7ced520a813b4f4774451fbac4e517e78b2 Mon Sep 17 00:00:00 2001 From: Doug Brown Date: Sun, 19 May 2024 12:19:30 -0700 Subject: serial: 8250_pxa: Configure tx_loadsz to match FIFO IRQ level The FIFO is 64 bytes, but the FCR is configured to fire the TX interrupt when the FIFO is half empty (bit 3 = 0). Thus, we should only write 32 bytes when a TX interrupt occurs. This fixes a problem observed on the PXA168 that dropped a bunch of TX bytes during large transmissions. Fixes: ab28f51c77cd ("serial: rewrite pxa2xx-uart to use 8250_core") Signed-off-by: Doug Brown Link: https://lore.kernel.org/r/20240519191929.122202-1-doug@schmorgal.com Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pxa.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/tty/serial/8250/8250_pxa.c b/drivers/tty/serial/8250/8250_pxa.c index f1a51b00b1b9..ba96fa913e7f 100644 --- a/drivers/tty/serial/8250/8250_pxa.c +++ b/drivers/tty/serial/8250/8250_pxa.c @@ -125,6 +125,7 @@ static int serial_pxa_probe(struct platform_device *pdev) uart.port.iotype = UPIO_MEM32; uart.port.regshift = 2; uart.port.fifosize = 64; + uart.tx_loadsz = 32; uart.dl_write = serial_pxa_dl_write; ret = serial8250_register_8250_port(&uart); -- cgit v1.2.3 From ca84cd379b45e9b1775b9e026f069a3a886b409d Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Fri, 31 May 2024 08:09:18 -0700 Subject: serial: port: Don't block system suspend even if bytes are left to xmit Recently, suspend testing on sc7180-trogdor based devices has started to sometimes fail with messages like this: port a88000.serial:0.0: PM: calling pm_runtime_force_suspend+0x0/0xf8 @ 28934, parent: a88000.serial:0 port a88000.serial:0.0: PM: dpm_run_callback(): pm_runtime_force_suspend+0x0/0xf8 returns -16 port a88000.serial:0.0: PM: pm_runtime_force_suspend+0x0/0xf8 returned -16 after 33 usecs port a88000.serial:0.0: PM: failed to suspend: error -16 I could reproduce these problems by logging in via an agetty on the debug serial port (which was _not_ used for kernel console) and running: cat /var/log/messages ...and then (via an SSH session) forcing a few suspend/resume cycles. Tracing through the code and doing some printf()-based debugging shows that the -16 (-EBUSY) comes from the recently added serial_port_runtime_suspend(). The idea of the serial_port_runtime_suspend() function is to prevent the port from being _runtime_ suspended if it still has bytes left to transmit. Having bytes left to transmit isn't a reason to block _system_ suspend, though. If a serdev device in the kernel needs to block system suspend it should block its own suspend and it can use serdev_device_wait_until_sent() to ensure bytes are sent. The DEFINE_RUNTIME_DEV_PM_OPS() used by the serial_port code means that the system suspend function will be pm_runtime_force_suspend(). In pm_runtime_force_suspend() we can see that before calling the runtime suspend function we'll call pm_runtime_disable(). This should be a reliable way to detect that we're called from system suspend and that we shouldn't look for busyness. Fixes: 43066e32227e ("serial: port: Don't suspend if the port is still busy") Cc: stable@vger.kernel.org Reviewed-by: Tony Lindgren Signed-off-by: Douglas Anderson Link: https://lore.kernel.org/r/20240531080914.v3.1.I2395e66cf70c6e67d774c56943825c289b9c13e4@changeid Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_port.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/tty/serial/serial_port.c b/drivers/tty/serial/serial_port.c index 91a338d3cb34..d35f1d24156c 100644 --- a/drivers/tty/serial/serial_port.c +++ b/drivers/tty/serial/serial_port.c @@ -64,6 +64,13 @@ static int serial_port_runtime_suspend(struct device *dev) if (port->flags & UPF_DEAD) return 0; + /* + * Nothing to do on pm_runtime_force_suspend(), see + * DEFINE_RUNTIME_DEV_PM_OPS. + */ + if (!pm_runtime_enabled(dev)) + return 0; + uart_port_lock_irqsave(port, &flags); if (!port_dev->tx_enabled) { uart_port_unlock_irqrestore(port, flags); -- cgit v1.2.3 From 4e534ff4b69c6960a165cab2c851b48f0a0da945 Mon Sep 17 00:00:00 2001 From: Hugo Villeneuve Date: Mon, 3 Jun 2024 11:26:00 -0400 Subject: serial: sc16is7xx: rename Kconfig CONFIG_SERIAL_SC16IS7XX_CORE Commit d49216438139 ("serial: sc16is7xx: split into core and I2C/SPI parts (core)") renamed SERIAL_SC16IS7XX_CORE by SERIAL_SC16IS7XX. This means that some configs should have been updated when I submitted the original patch, but unfortunately they were not. Geert mentioned for example: arch/mips/configs/cu1??0-neo_defconfig Rename SERIAL_SC16IS7XX to SERIAL_SC16IS7XX_CORE so that existing configs will still work correctly. Suggested-by: Geert Uytterhoeven Fixes: d49216438139 ("serial: sc16is7xx: split into core and I2C/SPI parts (core)") Signed-off-by: Hugo Villeneuve Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20240603152601.3689319-2-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 2 +- drivers/tty/serial/Makefile | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 4fdd7857ef4d..2a0da35c0ef8 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1023,7 +1023,7 @@ config SERIAL_SCCNXP_CONSOLE help Support for console on SCCNXP serial ports. -config SERIAL_SC16IS7XX_CORE +config SERIAL_SC16IS7XX tristate "NXP SC16IS7xx UART support" select SERIAL_CORE select SERIAL_SC16IS7XX_SPI if SPI_MASTER diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index faa45f2b8bb0..6ff74f0a9530 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -75,7 +75,7 @@ obj-$(CONFIG_SERIAL_SA1100) += sa1100.o obj-$(CONFIG_SERIAL_SAMSUNG) += samsung_tty.o obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o obj-$(CONFIG_SERIAL_SCCNXP) += sccnxp.o -obj-$(CONFIG_SERIAL_SC16IS7XX_CORE) += sc16is7xx.o +obj-$(CONFIG_SERIAL_SC16IS7XX) += sc16is7xx.o obj-$(CONFIG_SERIAL_SC16IS7XX_SPI) += sc16is7xx_spi.o obj-$(CONFIG_SERIAL_SC16IS7XX_I2C) += sc16is7xx_i2c.o obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o -- cgit v1.2.3 From 7a2e8e30ad89f498b206977396d028e10174390a Mon Sep 17 00:00:00 2001 From: Hugo Villeneuve Date: Mon, 3 Jun 2024 11:26:01 -0400 Subject: serial: sc16is7xx: re-add Kconfig SPI or I2C dependency Commit d49216438139 ("serial: sc16is7xx: split into core and I2C/SPI parts (core)") removed Kconfig SPI_MASTER or I2C dependency for SERIAL_SC16IS7XX (core). This removal was done because I inadvertently misinterpreted some review comments. Because of that, the driver question now pops up if both I2C and SPI_MASTER are disabled. Re-add Kconfig SPI_MASTER or I2C dependency to fix the problem. Suggested-by: Geert Uytterhoeven Fixes: d49216438139 ("serial: sc16is7xx: split into core and I2C/SPI parts (core)") Signed-off-by: Hugo Villeneuve Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20240603152601.3689319-3-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 2a0da35c0ef8..28e4beeabf8f 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1025,6 +1025,7 @@ config SERIAL_SCCNXP_CONSOLE config SERIAL_SC16IS7XX tristate "NXP SC16IS7xx UART support" + depends on SPI_MASTER || I2C select SERIAL_CORE select SERIAL_SC16IS7XX_SPI if SPI_MASTER select SERIAL_SC16IS7XX_I2C if I2C -- cgit v1.2.3 From ae01e52da244af5d650378ada1bfd2d946dc1b45 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Wed, 29 May 2024 00:05:53 +0900 Subject: serial: drop debugging WARN_ON_ONCE() from uart_write() syzbot is reporting lockdep warning upon int disc = 7; ioctl(open("/dev/ttyS3", O_RDONLY), TIOCSETD, &disc); sequence. Do like what commit 5f1149d2f4bf ("serial: drop debugging WARN_ON_ONCE() from uart_put_char()") does. Reported-by: syzbot+f78380e4eae53c64125c@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=f78380e4eae53c64125c Signed-off-by: Tetsuo Handa Acked-by: Jiri Slaby Link: https://lore.kernel.org/r/d775ae2d-a2ac-439e-8e2b-134749f60f30@I-love.SAKURA.ne.jp Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 2c1a0254d3f4..0c4d60976663 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -622,7 +622,7 @@ static ssize_t uart_write(struct tty_struct *tty, const u8 *buf, size_t count) return -EL3HLT; port = uart_port_lock(state, flags); - if (WARN_ON_ONCE(!state->port.xmit_buf)) { + if (!state->port.xmit_buf) { uart_port_unlock(port, flags); return 0; } -- cgit v1.2.3 From 718d4a63c0a62d16af1d0425d515d7e76f35681e Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Fri, 17 May 2024 10:36:48 +0800 Subject: Revert "usb: chipidea: move ci_ulpi_init after the phy initialization" This reverts commit 22ffd399e6e7aa18ae0314278ed0b7f05f8ab679. People report this commit causes the driver defer probed, and never back to work[1][2]. [1] https://lore.kernel.org/lkml/20240407011913.GA168730@nchen-desktop/T/#mc2b93bc11a8b01ec7cd0d0bf6b0b03951d9ef751 [2] https://lore.kernel.org/lkml/20240407011913.GA168730@nchen-desktop/T/#me87d9a2a76c07619d83b3879ea14780da89fbbbf Cc: Michael Grzeschik Cc: Marek Szyprowski Cc: Wouter Franken Signed-off-by: Peter Chen Link: https://lore.kernel.org/r/20240517023648.3459188-1-peter.chen@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/core.c | 8 ++++---- drivers/usb/chipidea/ulpi.c | 5 +++++ 2 files changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index bada13f704b6..835bf2428dc6 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -1084,6 +1084,10 @@ static int ci_hdrc_probe(struct platform_device *pdev) return -ENODEV; } + ret = ci_ulpi_init(ci); + if (ret) + return ret; + if (ci->platdata->phy) { ci->phy = ci->platdata->phy; } else if (ci->platdata->usb_phy) { @@ -1138,10 +1142,6 @@ static int ci_hdrc_probe(struct platform_device *pdev) goto ulpi_exit; } - ret = ci_ulpi_init(ci); - if (ret) - return ret; - ci->hw_bank.phys = res->start; ci->irq = platform_get_irq(pdev, 0); diff --git a/drivers/usb/chipidea/ulpi.c b/drivers/usb/chipidea/ulpi.c index 89fb51e2c3de..dfec07e8ae1d 100644 --- a/drivers/usb/chipidea/ulpi.c +++ b/drivers/usb/chipidea/ulpi.c @@ -68,6 +68,11 @@ int ci_ulpi_init(struct ci_hdrc *ci) if (ci->platdata->phy_mode != USBPHY_INTERFACE_MODE_ULPI) return 0; + /* + * Set PORTSC correctly so we can read/write ULPI registers for + * identification purposes + */ + hw_phymode_configure(ci); ci->ulpi_ops.read = ci_ulpi_read; ci->ulpi_ops.write = ci_ulpi_write; -- cgit v1.2.3 From fc3568f142cc5fe071d83be02d1851717d1fbf66 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 3 Jun 2024 12:00:07 +0200 Subject: usb: typec: ucsi: glink: increase max ports for x1e80100 The new X Elite (x1e80100) platform has three ports so increase the maximum so that all ports can be registered. Signed-off-by: Johan Hovold Reviewed-by: Dmitry Baryshkov Reviewed-by: Heikki Krogerus Reviewed-by: Abel Vesa Link: https://lore.kernel.org/r/20240603100007.10236-1-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/ucsi/ucsi_glink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/typec/ucsi/ucsi_glink.c b/drivers/usb/typec/ucsi/ucsi_glink.c index f7546bb488c3..985a880e86da 100644 --- a/drivers/usb/typec/ucsi/ucsi_glink.c +++ b/drivers/usb/typec/ucsi/ucsi_glink.c @@ -14,7 +14,7 @@ #include #include "ucsi.h" -#define PMIC_GLINK_MAX_PORTS 2 +#define PMIC_GLINK_MAX_PORTS 3 #define UCSI_BUF_SIZE 48 -- cgit v1.2.3 From 8475ffcfb381a77075562207ce08552414a80326 Mon Sep 17 00:00:00 2001 From: John Ernberg Date: Fri, 17 May 2024 11:43:52 +0000 Subject: USB: xen-hcd: Traverse host/ when CONFIG_USB_XEN_HCD is selected If no other USB HCDs are selected when compiling a small pure virutal machine, the Xen HCD driver cannot be built. Fix it by traversing down host/ if CONFIG_USB_XEN_HCD is selected. Fixes: 494ed3997d75 ("usb: Introduce Xen pvUSB frontend (xen hcd)") Cc: stable@vger.kernel.org # v5.17+ Signed-off-by: John Ernberg Link: https://lore.kernel.org/r/20240517114345.1190755-1-john.ernberg@actia.se Signed-off-by: Greg Kroah-Hartman --- drivers/usb/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 3a9a0dd4be70..949eca0adebe 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_USB_R8A66597_HCD) += host/ obj-$(CONFIG_USB_FSL_USB2) += host/ obj-$(CONFIG_USB_FOTG210_HCD) += host/ obj-$(CONFIG_USB_MAX3421_HCD) += host/ +obj-$(CONFIG_USB_XEN_HCD) += host/ obj-$(CONFIG_USB_C67X00_HCD) += c67x00/ -- cgit v1.2.3 From e7e921918d905544500ca7a95889f898121ba886 Mon Sep 17 00:00:00 2001 From: Amit Sunil Dhamne Date: Tue, 14 May 2024 15:01:31 -0700 Subject: usb: typec: tcpm: fix use-after-free case in tcpm_register_source_caps There could be a potential use-after-free case in tcpm_register_source_caps(). This could happen when: * new (say invalid) source caps are advertised * the existing source caps are unregistered * tcpm_register_source_caps() returns with an error as usb_power_delivery_register_capabilities() fails This causes port->partner_source_caps to hold on to the now freed source caps. Reset port->partner_source_caps value to NULL after unregistering existing source caps. Fixes: 230ecdf71a64 ("usb: typec: tcpm: unregister existing source caps before re-registration") Cc: stable@vger.kernel.org Signed-off-by: Amit Sunil Dhamne Reviewed-by: Ondrej Jirman Reviewed-by: Heikki Krogerus Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20240514220134.2143181-1-amitsd@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/tcpm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 8a1af08f71b6..be4127ef84e9 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -3014,8 +3014,10 @@ static int tcpm_register_source_caps(struct tcpm_port *port) memcpy(caps.pdo, port->source_caps, sizeof(u32) * port->nr_source_caps); caps.role = TYPEC_SOURCE; - if (cap) + if (cap) { usb_power_delivery_unregister_capabilities(cap); + port->partner_source_caps = NULL; + } cap = usb_power_delivery_register_capabilities(port->partner_pd, &caps); if (IS_ERR(cap)) -- cgit v1.2.3 From fc8fb9eea94d8f476e15f3a4a7addeb16b3b99d6 Mon Sep 17 00:00:00 2001 From: Kyle Tso Date: Mon, 20 May 2024 23:48:58 +0800 Subject: usb: typec: tcpm: Ignore received Hard Reset in TOGGLING state Similar to what fixed in Commit a6fe37f428c1 ("usb: typec: tcpm: Skip hard reset when in error recovery"), the handling of the received Hard Reset has to be skipped during TOGGLING state. [ 4086.021288] VBUS off [ 4086.021295] pending state change SNK_READY -> SNK_UNATTACHED @ 650 ms [rev2 NONE_AMS] [ 4086.022113] VBUS VSAFE0V [ 4086.022117] state change SNK_READY -> SNK_UNATTACHED [rev2 NONE_AMS] [ 4086.022447] VBUS off [ 4086.022450] state change SNK_UNATTACHED -> SNK_UNATTACHED [rev2 NONE_AMS] [ 4086.023060] VBUS VSAFE0V [ 4086.023064] state change SNK_UNATTACHED -> SNK_UNATTACHED [rev2 NONE_AMS] [ 4086.023070] disable BIST MODE TESTDATA [ 4086.023766] disable vbus discharge ret:0 [ 4086.023911] Setting usb_comm capable false [ 4086.028874] Setting voltage/current limit 0 mV 0 mA [ 4086.028888] polarity 0 [ 4086.030305] Requesting mux state 0, usb-role 0, orientation 0 [ 4086.033539] Start toggling [ 4086.038496] state change SNK_UNATTACHED -> TOGGLING [rev2 NONE_AMS] // This Hard Reset is unexpected [ 4086.038499] Received hard reset [ 4086.038501] state change TOGGLING -> HARD_RESET_START [rev2 HARD_RESET] Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable@vger.kernel.org Signed-off-by: Kyle Tso Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20240520154858.1072347-1-kyletso@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/tcpm.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index be4127ef84e9..5d4da962acc8 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -6174,6 +6174,7 @@ static void _tcpm_pd_hard_reset(struct tcpm_port *port) port->tcpc->set_bist_data(port->tcpc, false); switch (port->state) { + case TOGGLING: case ERROR_RECOVERY: case PORT_RESET: case PORT_RESET_WAIT_OFF: -- cgit v1.2.3 From f85d39dd7ed89ffdd622bc1de247ffba8d961504 Mon Sep 17 00:00:00 2001 From: Andrey Konovalov Date: Mon, 27 May 2024 19:35:38 +0200 Subject: kcov, usb: disable interrupts in kcov_remote_start_usb_softirq After commit 8fea0c8fda30 ("usb: core: hcd: Convert from tasklet to BH workqueue"), usb_giveback_urb_bh() runs in the BH workqueue with interrupts enabled. Thus, the remote coverage collection section in usb_giveback_urb_bh()-> __usb_hcd_giveback_urb() might be interrupted, and the interrupt handler might invoke __usb_hcd_giveback_urb() again. This breaks KCOV, as it does not support nested remote coverage collection sections within the same context (neither in task nor in softirq). Update kcov_remote_start/stop_usb_softirq() to disable interrupts for the duration of the coverage collection section to avoid nested sections in the softirq context (in addition to such in the task context, which are already handled). Reported-by: Tetsuo Handa Closes: https://lore.kernel.org/linux-usb/0f4d1964-7397-485b-bc48-11c01e2fcbca@I-love.SAKURA.ne.jp/ Closes: https://syzkaller.appspot.com/bug?extid=0438378d6f157baae1a2 Suggested-by: Alan Stern Fixes: 8fea0c8fda30 ("usb: core: hcd: Convert from tasklet to BH workqueue") Cc: stable@vger.kernel.org Acked-by: Dmitry Vyukov Signed-off-by: Andrey Konovalov Link: https://lore.kernel.org/r/20240527173538.4989-1-andrey.konovalov@linux.dev Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 12 +++++++----- include/linux/kcov.h | 47 ++++++++++++++++++++++++++++++++++++++--------- 2 files changed, 45 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index e3366f4d82b9..1ff7d901fede 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1623,6 +1623,7 @@ static void __usb_hcd_giveback_urb(struct urb *urb) struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus); struct usb_anchor *anchor = urb->anchor; int status = urb->unlinked; + unsigned long flags; urb->hcpriv = NULL; if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) && @@ -1640,13 +1641,14 @@ static void __usb_hcd_giveback_urb(struct urb *urb) /* pass ownership to the completion handler */ urb->status = status; /* - * This function can be called in task context inside another remote - * coverage collection section, but kcov doesn't support that kind of - * recursion yet. Only collect coverage in softirq context for now. + * Only collect coverage in the softirq context and disable interrupts + * to avoid scenarios with nested remote coverage collection sections + * that KCOV does not support. + * See the comment next to kcov_remote_start_usb_softirq() for details. */ - kcov_remote_start_usb_softirq((u64)urb->dev->bus->busnum); + flags = kcov_remote_start_usb_softirq((u64)urb->dev->bus->busnum); urb->complete(urb); - kcov_remote_stop_softirq(); + kcov_remote_stop_softirq(flags); usb_anchor_resume_wakeups(anchor); atomic_dec(&urb->use_count); diff --git a/include/linux/kcov.h b/include/linux/kcov.h index b851ba415e03..1068a7318d89 100644 --- a/include/linux/kcov.h +++ b/include/linux/kcov.h @@ -55,21 +55,47 @@ static inline void kcov_remote_start_usb(u64 id) /* * The softirq flavor of kcov_remote_*() functions is introduced as a temporary - * work around for kcov's lack of nested remote coverage sections support in - * task context. Adding support for nested sections is tracked in: - * https://bugzilla.kernel.org/show_bug.cgi?id=210337 + * workaround for KCOV's lack of nested remote coverage sections support. + * + * Adding support is tracked in https://bugzilla.kernel.org/show_bug.cgi?id=210337. + * + * kcov_remote_start_usb_softirq(): + * + * 1. Only collects coverage when called in the softirq context. This allows + * avoiding nested remote coverage collection sections in the task context. + * For example, USB/IP calls usb_hcd_giveback_urb() in the task context + * within an existing remote coverage collection section. Thus, KCOV should + * not attempt to start collecting coverage within the coverage collection + * section in __usb_hcd_giveback_urb() in this case. + * + * 2. Disables interrupts for the duration of the coverage collection section. + * This allows avoiding nested remote coverage collection sections in the + * softirq context (a softirq might occur during the execution of a work in + * the BH workqueue, which runs with in_serving_softirq() > 0). + * For example, usb_giveback_urb_bh() runs in the BH workqueue with + * interrupts enabled, so __usb_hcd_giveback_urb() might be interrupted in + * the middle of its remote coverage collection section, and the interrupt + * handler might invoke __usb_hcd_giveback_urb() again. */ -static inline void kcov_remote_start_usb_softirq(u64 id) +static inline unsigned long kcov_remote_start_usb_softirq(u64 id) { - if (in_serving_softirq()) + unsigned long flags = 0; + + if (in_serving_softirq()) { + local_irq_save(flags); kcov_remote_start_usb(id); + } + + return flags; } -static inline void kcov_remote_stop_softirq(void) +static inline void kcov_remote_stop_softirq(unsigned long flags) { - if (in_serving_softirq()) + if (in_serving_softirq()) { kcov_remote_stop(); + local_irq_restore(flags); + } } #ifdef CONFIG_64BIT @@ -103,8 +129,11 @@ static inline u64 kcov_common_handle(void) } static inline void kcov_remote_start_common(u64 id) {} static inline void kcov_remote_start_usb(u64 id) {} -static inline void kcov_remote_start_usb_softirq(u64 id) {} -static inline void kcov_remote_stop_softirq(void) {} +static inline unsigned long kcov_remote_start_usb_softirq(u64 id) +{ + return 0; +} +static inline void kcov_remote_stop_softirq(unsigned long flags) {} #endif /* CONFIG_KCOV */ #endif /* _LINUX_KCOV_H */ -- cgit v1.2.3 From 8bdf8a42bca4f47646fd105a387ab6926948c7f1 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Fri, 31 May 2024 13:46:52 +0300 Subject: usb: typec: ucsi: Ack also failed Get Error commands It is possible that also the GET_ERROR command fails. If that happens, the command completion still needs to be acknowledged. Otherwise the interface will be stuck until it's reset. Reported-by: Ammy Yi Fixes: bdc62f2bae8f ("usb: typec: ucsi: Simplified registration and I/O API") Cc: stable@vger.kernel.org Signed-off-by: Heikki Krogerus Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20240531104653.1303519-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/ucsi/ucsi.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c index cb52e7b0a2c5..2cc7aedd490f 100644 --- a/drivers/usb/typec/ucsi/ucsi.c +++ b/drivers/usb/typec/ucsi/ucsi.c @@ -153,8 +153,13 @@ static int ucsi_exec_command(struct ucsi *ucsi, u64 cmd) } if (cci & UCSI_CCI_ERROR) { - if (cmd == UCSI_GET_ERROR_STATUS) + if (cmd == UCSI_GET_ERROR_STATUS) { + ret = ucsi_acknowledge(ucsi, false); + if (ret) + return ret; + return -EIO; + } return ucsi_read_error(ucsi); } -- cgit v1.2.3 From 16637fea001ab3c8df528a8995b3211906165a30 Mon Sep 17 00:00:00 2001 From: Shichao Lai Date: Sun, 26 May 2024 09:27:45 +0800 Subject: usb-storage: alauda: Check whether the media is initialized The member "uzonesize" of struct alauda_info will remain 0 if alauda_init_media() fails, potentially causing divide errors in alauda_read_data() and alauda_write_lba(). - Add a member "media_initialized" to struct alauda_info. - Change a condition in alauda_check_media() to ensure the first initialization. - Add an error check for the return value of alauda_init_media(). Fixes: e80b0fade09e ("[PATCH] USB Storage: add alauda support") Reported-by: xingwei lee Reported-by: yue sun Reviewed-by: Alan Stern Signed-off-by: Shichao Lai Link: https://lore.kernel.org/r/20240526012745.2852061-1-shichaorai@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/alauda.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c index 115f05a6201a..40d34cc28344 100644 --- a/drivers/usb/storage/alauda.c +++ b/drivers/usb/storage/alauda.c @@ -105,6 +105,8 @@ struct alauda_info { unsigned char sense_key; unsigned long sense_asc; /* additional sense code */ unsigned long sense_ascq; /* additional sense code qualifier */ + + bool media_initialized; }; #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) ) @@ -476,11 +478,12 @@ static int alauda_check_media(struct us_data *us) } /* Check for media change */ - if (status[0] & 0x08) { + if (status[0] & 0x08 || !info->media_initialized) { usb_stor_dbg(us, "Media change detected\n"); alauda_free_maps(&MEDIA_INFO(us)); - alauda_init_media(us); - + rc = alauda_init_media(us); + if (rc == USB_STOR_TRANSPORT_GOOD) + info->media_initialized = true; info->sense_key = UNIT_ATTENTION; info->sense_asc = 0x28; info->sense_ascq = 0x00; -- cgit v1.2.3 From 971187350602d03c4a27c0783ff412502b95720a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 4 Jul 2023 14:17:19 +0100 Subject: driver core: remove devm_device_add_groups() There is no more in-kernel users of this function, and no driver should ever be using it, so remove it from the kernel. Acked-by: Dmitry Torokhov Acked-by: "Rafael J. Wysocki" Link: https://lore.kernel.org/r/20230704131715.44454-8-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 45 --------------------------------------------- include/linux/device.h | 2 -- 2 files changed, 47 deletions(-) (limited to 'drivers') diff --git a/drivers/base/core.c b/drivers/base/core.c index 131d96c6090b..2e776fcc31b6 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -2845,15 +2845,6 @@ static void devm_attr_group_remove(struct device *dev, void *res) sysfs_remove_group(&dev->kobj, group); } -static void devm_attr_groups_remove(struct device *dev, void *res) -{ - union device_attr_group_devres *devres = res; - const struct attribute_group **groups = devres->groups; - - dev_dbg(dev, "%s: removing groups %p\n", __func__, groups); - sysfs_remove_groups(&dev->kobj, groups); -} - /** * devm_device_add_group - given a device, create a managed attribute group * @dev: The device to create the group for @@ -2886,42 +2877,6 @@ int devm_device_add_group(struct device *dev, const struct attribute_group *grp) } EXPORT_SYMBOL_GPL(devm_device_add_group); -/** - * devm_device_add_groups - create a bunch of managed attribute groups - * @dev: The device to create the group for - * @groups: The attribute groups to create, NULL terminated - * - * This function creates a bunch of managed attribute groups. If an error - * occurs when creating a group, all previously created groups will be - * removed, unwinding everything back to the original state when this - * function was called. It will explicitly warn and error if any of the - * attribute files being created already exist. - * - * Returns 0 on success or error code from sysfs_create_group on failure. - */ -int devm_device_add_groups(struct device *dev, - const struct attribute_group **groups) -{ - union device_attr_group_devres *devres; - int error; - - devres = devres_alloc(devm_attr_groups_remove, - sizeof(*devres), GFP_KERNEL); - if (!devres) - return -ENOMEM; - - error = sysfs_create_groups(&dev->kobj, groups); - if (error) { - devres_free(devres); - return error; - } - - devres->groups = groups; - devres_add(dev, devres); - return 0; -} -EXPORT_SYMBOL_GPL(devm_device_add_groups); - static int device_add_attrs(struct device *dev) { const struct class *class = dev->class; diff --git a/include/linux/device.h b/include/linux/device.h index fc3bd7116ab9..ace039151cb8 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -1220,8 +1220,6 @@ static inline void device_remove_group(struct device *dev, return device_remove_groups(dev, groups); } -int __must_check devm_device_add_groups(struct device *dev, - const struct attribute_group **groups); int __must_check devm_device_add_group(struct device *dev, const struct attribute_group *grp); -- cgit v1.2.3 From ce3af2ee95170b7d9e15fff6e500d67deab1e7b3 Mon Sep 17 00:00:00 2001 From: José Expósito Date: Fri, 24 May 2024 15:05:39 +0200 Subject: HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix a memory leak on logi_dj_recv_send_report() error path. Fixes: 6f20d3261265 ("HID: logitech-dj: Fix error handling in logi_dj_recv_switch_to_dj_mode()") Signed-off-by: José Expósito Signed-off-by: Jiri Kosina --- drivers/hid/hid-logitech-dj.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c index 3c3c497b6b91..37958edec55f 100644 --- a/drivers/hid/hid-logitech-dj.c +++ b/drivers/hid/hid-logitech-dj.c @@ -1284,8 +1284,10 @@ static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev, */ msleep(50); - if (retval) + if (retval) { + kfree(dj_report); return retval; + } } /* -- cgit v1.2.3 From 655a8a7684b897721f87c59798fd04d8b79f1b69 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sun, 26 May 2024 17:05:59 +0200 Subject: HID: nintendo: Fix an error handling path in nintendo_hid_probe() joycon_leds_create() has a ida_alloc() call. So if an error occurs after it, a corresponding ida_free() call is needed, as already done in the .remove function. This is not 100% perfect, because if ida_alloc() fails, then 'ctlr->player_id' will forced to be U32_MAX, and an error will be logged when ida_free() is called. Considering that this can't happen in real life, no special handling is done to handle it. Fixes: 5307de63d71d ("HID: nintendo: use ida for LED player id") Signed-off-by: Christophe JAILLET Reviewed-by: Silvan Jegen Signed-off-by: Jiri Kosina --- drivers/hid/hid-nintendo.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c index b4a97803eca3..3062daf68d31 100644 --- a/drivers/hid/hid-nintendo.c +++ b/drivers/hid/hid-nintendo.c @@ -2725,13 +2725,13 @@ static int nintendo_hid_probe(struct hid_device *hdev, ret = joycon_power_supply_create(ctlr); if (ret) { hid_err(hdev, "Failed to create power_supply; ret=%d\n", ret); - goto err_close; + goto err_ida; } ret = joycon_input_create(ctlr); if (ret) { hid_err(hdev, "Failed to create input device; ret=%d\n", ret); - goto err_close; + goto err_ida; } ctlr->ctlr_state = JOYCON_CTLR_STATE_READ; @@ -2739,6 +2739,8 @@ static int nintendo_hid_probe(struct hid_device *hdev, hid_dbg(hdev, "probe - success\n"); return 0; +err_ida: + ida_free(&nintendo_player_id_allocator, ctlr->player_id); err_close: hid_hw_close(hdev); err_stop: -- cgit v1.2.3 From 9e438fe31e96b75c2ec599f6a9239950e6712358 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 3 Jun 2024 09:41:03 +0200 Subject: HID: intel-ish-hid: fix endian-conversion The newly added file causes a ton of sparse warnings about the incorrect use of __le32 and similar types: drivers/hid/intel-ish-hid/ishtp/loader.h:41:23: error: invalid bitfield specifier for type restricted __le32. drivers/hid/intel-ish-hid/ishtp/loader.h:42:27: error: invalid bitfield specifier for type restricted __le32. drivers/hid/intel-ish-hid/ishtp/loader.h:43:24: error: invalid bitfield specifier for type restricted __le32. drivers/hid/intel-ish-hid/ishtp/loader.h:44:24: error: invalid bitfield specifier for type restricted __le32. drivers/hid/intel-ish-hid/ishtp/loader.h:45:22: error: invalid bitfield specifier for type restricted __le32. drivers/hid/intel-ish-hid/ishtp/loader.c:172:33: warning: restricted __le32 degrades to integer drivers/hid/intel-ish-hid/ishtp/loader.c:178:50: warning: incorrect type in assignment (different base types) drivers/hid/intel-ish-hid/ishtp/loader.c:178:50: expected restricted __le32 [usertype] length drivers/hid/intel-ish-hid/ishtp/loader.c:178:50: got unsigned long drivers/hid/intel-ish-hid/ishtp/loader.c:179:50: warning: incorrect type in assignment (different base types) drivers/hid/intel-ish-hid/ishtp/loader.c:179:50: expected restricted __le32 [usertype] fw_off drivers/hid/intel-ish-hid/ishtp/loader.c:179:50: got unsigned int [usertype] offset drivers/hid/intel-ish-hid/ishtp/loader.c:180:17: warning: cast from restricted __le32 drivers/hid/intel-ish-hid/ishtp/loader.c:183:24: warning: invalid assignment: += drivers/hid/intel-ish-hid/ishtp/loader.c:183:24: left side has type unsigned int drivers/hid/intel-ish-hid/ishtp/loader.c:183:24: right side has type restricted __le32 Add the necessary conversions and use temporary variables where appropriate to avoid converting back. Fixes: 579a267e4617 ("HID: intel-ish-hid: Implement loading firmware from host feature") Signed-off-by: Arnd Bergmann Reviewed-by: Zhang Lixu Tested-by: Zhang Lixu Signed-off-by: Jiri Kosina --- drivers/hid/intel-ish-hid/ishtp/loader.c | 69 ++++++++++++++++++-------------- drivers/hid/intel-ish-hid/ishtp/loader.h | 33 ++++++++------- 2 files changed, 57 insertions(+), 45 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/intel-ish-hid/ishtp/loader.c b/drivers/hid/intel-ish-hid/ishtp/loader.c index 2785b04a2f5a..fcca070bdecb 100644 --- a/drivers/hid/intel-ish-hid/ishtp/loader.c +++ b/drivers/hid/intel-ish-hid/ishtp/loader.c @@ -84,8 +84,8 @@ static int loader_write_message(struct ishtp_device *dev, void *buf, int len) static int loader_xfer_cmd(struct ishtp_device *dev, void *req, int req_len, void *resp, int resp_len) { - struct loader_msg_header *req_hdr = req; - struct loader_msg_header *resp_hdr = resp; + union loader_msg_header req_hdr; + union loader_msg_header resp_hdr; struct device *devc = dev->devc; int rv; @@ -93,34 +93,37 @@ static int loader_xfer_cmd(struct ishtp_device *dev, void *req, int req_len, dev->fw_loader_rx_size = resp_len; rv = loader_write_message(dev, req, req_len); + req_hdr.val32 = le32_to_cpup(req); + if (rv < 0) { - dev_err(devc, "write cmd %u failed:%d\n", req_hdr->command, rv); + dev_err(devc, "write cmd %u failed:%d\n", req_hdr.command, rv); return rv; } /* Wait the ACK */ wait_event_interruptible_timeout(dev->wait_loader_recvd_msg, dev->fw_loader_received, ISHTP_LOADER_TIMEOUT); + resp_hdr.val32 = le32_to_cpup(resp); dev->fw_loader_rx_size = 0; dev->fw_loader_rx_buf = NULL; if (!dev->fw_loader_received) { - dev_err(devc, "wait response of cmd %u timeout\n", req_hdr->command); + dev_err(devc, "wait response of cmd %u timeout\n", req_hdr.command); return -ETIMEDOUT; } - if (!resp_hdr->is_response) { - dev_err(devc, "not a response for %u\n", req_hdr->command); + if (!resp_hdr.is_response) { + dev_err(devc, "not a response for %u\n", req_hdr.command); return -EBADMSG; } - if (req_hdr->command != resp_hdr->command) { - dev_err(devc, "unexpected cmd response %u:%u\n", req_hdr->command, - resp_hdr->command); + if (req_hdr.command != resp_hdr.command) { + dev_err(devc, "unexpected cmd response %u:%u\n", req_hdr.command, + resp_hdr.command); return -EBADMSG; } - if (resp_hdr->status) { - dev_err(devc, "cmd %u failed %u\n", req_hdr->command, resp_hdr->status); + if (resp_hdr.status) { + dev_err(devc, "cmd %u failed %u\n", req_hdr.command, resp_hdr.status); return -EIO; } @@ -157,30 +160,33 @@ static void release_dma_bufs(struct ishtp_device *dev, * @fragment: The ISHTP firmware fragment descriptor * @dma_bufs: The array of DMA fragment buffers * @fragment_size: The size of a single DMA fragment + * @fragment_count: Number of fragments * * Return: 0 on success, negative error code on failure */ static int prepare_dma_bufs(struct ishtp_device *dev, const struct firmware *ish_fw, struct loader_xfer_dma_fragment *fragment, - void **dma_bufs, u32 fragment_size) + void **dma_bufs, u32 fragment_size, u32 fragment_count) { dma_addr_t dma_addr; u32 offset = 0; + u32 length; int i; - for (i = 0; i < fragment->fragment_cnt && offset < ish_fw->size; i++) { + for (i = 0; i < fragment_count && offset < ish_fw->size; i++) { dma_bufs[i] = dma_alloc_coherent(dev->devc, fragment_size, &dma_addr, GFP_KERNEL); if (!dma_bufs[i]) return -ENOMEM; fragment->fragment_tbl[i].ddr_adrs = cpu_to_le64(dma_addr); - fragment->fragment_tbl[i].length = clamp(ish_fw->size - offset, 0, fragment_size); - fragment->fragment_tbl[i].fw_off = offset; - memcpy(dma_bufs[i], ish_fw->data + offset, fragment->fragment_tbl[i].length); + length = clamp(ish_fw->size - offset, 0, fragment_size); + fragment->fragment_tbl[i].length = cpu_to_le32(length); + fragment->fragment_tbl[i].fw_off = cpu_to_le32(offset); + memcpy(dma_bufs[i], ish_fw->data + offset, length); clflush_cache_range(dma_bufs[i], fragment_size); - offset += fragment->fragment_tbl[i].length; + offset += length; } return 0; @@ -208,17 +214,17 @@ void ishtp_loader_work(struct work_struct *work) { DEFINE_RAW_FLEX(struct loader_xfer_dma_fragment, fragment, fragment_tbl, FRAGMENT_MAX_NUM); struct ishtp_device *dev = container_of(work, struct ishtp_device, work_fw_loader); - struct loader_xfer_query query = { - .header.command = LOADER_CMD_XFER_QUERY, - }; - struct loader_start start = { - .header.command = LOADER_CMD_START, - }; + union loader_msg_header query_hdr = { .command = LOADER_CMD_XFER_QUERY, }; + union loader_msg_header start_hdr = { .command = LOADER_CMD_START, }; + union loader_msg_header fragment_hdr = { .command = LOADER_CMD_XFER_FRAGMENT, }; + struct loader_xfer_query query = { .header = cpu_to_le32(query_hdr.val32), }; + struct loader_start start = { .header = cpu_to_le32(start_hdr.val32), }; union loader_recv_message recv_msg; char *filename = dev->driver_data->fw_filename; const struct firmware *ish_fw; void *dma_bufs[FRAGMENT_MAX_NUM] = {}; u32 fragment_size; + u32 fragment_count; int retry = ISHTP_LOADER_RETRY_TIMES; int rv; @@ -228,23 +234,24 @@ void ishtp_loader_work(struct work_struct *work) return; } - fragment->fragment.header.command = LOADER_CMD_XFER_FRAGMENT; - fragment->fragment.xfer_mode = LOADER_XFER_MODE_DMA; - fragment->fragment.is_last = 1; - fragment->fragment.size = ish_fw->size; + fragment->fragment.header = cpu_to_le32(fragment_hdr.val32); + fragment->fragment.xfer_mode = cpu_to_le32(LOADER_XFER_MODE_DMA); + fragment->fragment.is_last = cpu_to_le32(1); + fragment->fragment.size = cpu_to_le32(ish_fw->size); /* Calculate the size of a single DMA fragment */ fragment_size = PFN_ALIGN(DIV_ROUND_UP(ish_fw->size, FRAGMENT_MAX_NUM)); /* Calculate the count of DMA fragments */ - fragment->fragment_cnt = DIV_ROUND_UP(ish_fw->size, fragment_size); + fragment_count = DIV_ROUND_UP(ish_fw->size, fragment_size); + fragment->fragment_cnt = cpu_to_le32(fragment_count); - rv = prepare_dma_bufs(dev, ish_fw, fragment, dma_bufs, fragment_size); + rv = prepare_dma_bufs(dev, ish_fw, fragment, dma_bufs, fragment_size, fragment_count); if (rv) { dev_err(dev->devc, "prepare DMA buffer failed.\n"); goto out; } do { - query.image_size = ish_fw->size; + query.image_size = cpu_to_le32(ish_fw->size); rv = loader_xfer_cmd(dev, &query, sizeof(query), recv_msg.raw_data, sizeof(struct loader_xfer_query_ack)); if (rv) @@ -257,7 +264,7 @@ void ishtp_loader_work(struct work_struct *work) recv_msg.query_ack.version_build); rv = loader_xfer_cmd(dev, fragment, - struct_size(fragment, fragment_tbl, fragment->fragment_cnt), + struct_size(fragment, fragment_tbl, fragment_count), recv_msg.raw_data, sizeof(struct loader_xfer_fragment_ack)); if (rv) continue; /* try again if failed */ diff --git a/drivers/hid/intel-ish-hid/ishtp/loader.h b/drivers/hid/intel-ish-hid/ishtp/loader.h index 7aa45ebc3f7b..308b96085a4d 100644 --- a/drivers/hid/intel-ish-hid/ishtp/loader.h +++ b/drivers/hid/intel-ish-hid/ishtp/loader.h @@ -30,19 +30,23 @@ struct work_struct; #define LOADER_XFER_MODE_DMA BIT(0) /** - * struct loader_msg_header - ISHTP firmware loader message header + * union loader_msg_header - ISHTP firmware loader message header * @command: Command type * @is_response: Indicates if the message is a response * @has_next: Indicates if there is a next message * @reserved: Reserved for future use * @status: Status of the message - */ -struct loader_msg_header { - __le32 command:7; - __le32 is_response:1; - __le32 has_next:1; - __le32 reserved:15; - __le32 status:8; + * @val32: entire header as a 32-bit value + */ +union loader_msg_header { + struct { + __u32 command:7; + __u32 is_response:1; + __u32 has_next:1; + __u32 reserved:15; + __u32 status:8; + }; + __u32 val32; }; /** @@ -51,7 +55,7 @@ struct loader_msg_header { * @image_size: Size of the image */ struct loader_xfer_query { - struct loader_msg_header header; + __le32 header; __le32 image_size; }; @@ -103,7 +107,7 @@ struct loader_capability { * @capability: Loader capability */ struct loader_xfer_query_ack { - struct loader_msg_header header; + __le32 header; __le16 version_major; __le16 version_minor; __le16 version_hotfix; @@ -122,7 +126,7 @@ struct loader_xfer_query_ack { * @is_last: Is last */ struct loader_xfer_fragment { - struct loader_msg_header header; + __le32 header; __le32 xfer_mode; __le32 offset; __le32 size; @@ -134,7 +138,7 @@ struct loader_xfer_fragment { * @header: Header of the message */ struct loader_xfer_fragment_ack { - struct loader_msg_header header; + __le32 header; }; /** @@ -170,7 +174,7 @@ struct loader_xfer_dma_fragment { * @header: Header of the message */ struct loader_start { - struct loader_msg_header header; + __le32 header; }; /** @@ -178,10 +182,11 @@ struct loader_start { * @header: Header of the message */ struct loader_start_ack { - struct loader_msg_header header; + __le32 header; }; union loader_recv_message { + __le32 header; struct loader_xfer_query_ack query_ack; struct loader_xfer_fragment_ack fragment_ack; struct loader_start_ack start_ack; -- cgit v1.2.3 From 9c8f05cf1d7abd1bfb53cebe691bf3acb7baee99 Mon Sep 17 00:00:00 2001 From: Jeff Johnson Date: Mon, 3 Jun 2024 23:00:59 -0700 Subject: HID: logitech-hidpp: add missing MODULE_DESCRIPTION() macro make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-logitech-hidpp.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson Signed-off-by: Jiri Kosina --- drivers/hid/hid-logitech-hidpp.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c index b81d5bcc76a7..400d70e6dbe2 100644 --- a/drivers/hid/hid-logitech-hidpp.c +++ b/drivers/hid/hid-logitech-hidpp.c @@ -27,6 +27,7 @@ #include "usbhid/usbhid.h" #include "hid-ids.h" +MODULE_DESCRIPTION("Support for Logitech devices relying on the HID++ specification"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Benjamin Tissoires "); MODULE_AUTHOR("Nestor Lopez Casado "); -- cgit v1.2.3 From 0698ff57bf327d9a5735a898f78161b8dada160b Mon Sep 17 00:00:00 2001 From: Michal Wajdeczko Date: Mon, 27 May 2024 13:54:08 +0200 Subject: drm/xe/pf: Update the LMTT when freeing VF GT config MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The LMTT must be updated whenever we change the VF LMEM configuration. We missed that step when freeing the whole VF GT config, which could result in stale PTE in LMTT or LMTT PT object leaks. Fix that. Fixes: ac6598aed1b3 ("drm/xe/pf: Add support to configure SR-IOV VFs") Signed-off-by: Michal Wajdeczko Reviewed-by: Piotr Piórkowski Link: https://patchwork.freedesktop.org/patch/msgid/20240527115408.1064-1-michal.wajdeczko@intel.com (cherry picked from commit c063cce7df3a765539e2a2d75ab943f334446cce) Signed-off-by: Thomas Hellström --- drivers/gpu/drm/xe/xe_gt_sriov_pf_config.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/xe/xe_gt_sriov_pf_config.c b/drivers/gpu/drm/xe/xe_gt_sriov_pf_config.c index 79116ad58620..476d613333a9 100644 --- a/drivers/gpu/drm/xe/xe_gt_sriov_pf_config.c +++ b/drivers/gpu/drm/xe/xe_gt_sriov_pf_config.c @@ -1749,6 +1749,7 @@ static void pf_release_vf_config(struct xe_gt *gt, unsigned int vfid) if (!xe_gt_is_media_type(gt)) { pf_release_vf_config_ggtt(gt, config); pf_release_vf_config_lmem(gt, config); + pf_update_vf_lmtt(gt_to_xe(gt), vfid); } pf_release_config_ctxs(gt, config); pf_release_config_dbs(gt, config); -- cgit v1.2.3 From 1db5322b7e6b58e1b304ce69a50e9dca798ca95b Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Thu, 30 May 2024 12:14:15 +0300 Subject: mei: demote client disconnect warning on suspend to debug Change level for the "not connected" client message in the write callback from error to debug. The MEI driver currently disconnects all clients upon system suspend. This behavior is by design and user-space applications with open connections before the suspend are expected to handle errors upon resume, by reopening their handles, reconnecting, and retrying their operations. However, the current driver implementation logs an error message every time a write operation is attempted on a disconnected client. Since this is a normal and expected flow after system resume logging this as an error can be misleading. Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Link: https://lore.kernel.org/r/20240530091415.725247-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c index 79e6f3c1341f..40c3fe26f76d 100644 --- a/drivers/misc/mei/main.c +++ b/drivers/misc/mei/main.c @@ -329,7 +329,7 @@ static ssize_t mei_write(struct file *file, const char __user *ubuf, } if (!mei_cl_is_connected(cl)) { - cl_err(dev, cl, "is not connected"); + cl_dbg(dev, cl, "is not connected"); rets = -ENODEV; goto out; } -- cgit v1.2.3 From 283cb234ef95d94c61f59e1cd070cd9499b51292 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Tue, 4 Jun 2024 12:07:28 +0300 Subject: mei: me: release irq in mei_me_pci_resume error path The mei_me_pci_resume doesn't release irq on the error path, in case mei_start() fails. Cc: Fixes: 33ec08263147 ("mei: revamp mei reset state machine") Signed-off-by: Tomas Winkler Link: https://lore.kernel.org/r/20240604090728.1027307-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/pci-me.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index 7f59dd38c32f..6589635f8ba3 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -385,8 +385,10 @@ static int mei_me_pci_resume(struct device *device) } err = mei_restart(dev); - if (err) + if (err) { + free_irq(pdev->irq, dev); return err; + } /* Start timer if stopped in suspend */ schedule_delayed_work(&dev->timer_work, HZ); -- cgit v1.2.3 From 9b5e045029d8bded4c6979874ed3abc347c1415c Mon Sep 17 00:00:00 2001 From: Wentong Wu Date: Mon, 27 May 2024 20:38:35 +0800 Subject: mei: vsc: Don't stop/restart mei device during system suspend/resume The dynamically created mei client device (mei csi) is used as one V4L2 sub device of the whole video pipeline, and the V4L2 connection graph is built by software node. The mei_stop() and mei_restart() will delete the old mei csi client device and create a new mei client device, which will cause the software node information saved in old mei csi device lost and the whole video pipeline will be broken. Removing mei_stop()/mei_restart() during system suspend/resume can fix the issue above and won't impact hardware actual power saving logic. Fixes: f6085a96c973 ("mei: vsc: Unregister interrupt handler for system suspend") Cc: stable@vger.kernel.org # for 6.8+ Reported-by: Hao Yao Signed-off-by: Wentong Wu Reviewed-by: Sakari Ailus Tested-by: Jason Chen Tested-by: Sakari Ailus Acked-by: Tomas Winkler Link: https://lore.kernel.org/r/20240527123835.522384-1-wentong.wu@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/platform-vsc.c | 39 +++++++++++++++------------------------ 1 file changed, 15 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/mei/platform-vsc.c b/drivers/misc/mei/platform-vsc.c index b543e6b9f3cf..1ec65d87488a 100644 --- a/drivers/misc/mei/platform-vsc.c +++ b/drivers/misc/mei/platform-vsc.c @@ -399,41 +399,32 @@ static void mei_vsc_remove(struct platform_device *pdev) static int mei_vsc_suspend(struct device *dev) { - struct mei_device *mei_dev = dev_get_drvdata(dev); - struct mei_vsc_hw *hw = mei_dev_to_vsc_hw(mei_dev); + struct mei_device *mei_dev; + int ret = 0; - mei_stop(mei_dev); + mei_dev = dev_get_drvdata(dev); + if (!mei_dev) + return -ENODEV; - mei_disable_interrupts(mei_dev); + mutex_lock(&mei_dev->device_lock); - vsc_tp_free_irq(hw->tp); + if (!mei_write_is_idle(mei_dev)) + ret = -EAGAIN; - return 0; + mutex_unlock(&mei_dev->device_lock); + + return ret; } static int mei_vsc_resume(struct device *dev) { - struct mei_device *mei_dev = dev_get_drvdata(dev); - struct mei_vsc_hw *hw = mei_dev_to_vsc_hw(mei_dev); - int ret; - - ret = vsc_tp_request_irq(hw->tp); - if (ret) - return ret; - - ret = mei_restart(mei_dev); - if (ret) - goto err_free; + struct mei_device *mei_dev; - /* start timer if stopped in suspend */ - schedule_delayed_work(&mei_dev->timer_work, HZ); + mei_dev = dev_get_drvdata(dev); + if (!mei_dev) + return -ENODEV; return 0; - -err_free: - vsc_tp_free_irq(hw->tp); - - return ret; } static DEFINE_SIMPLE_DEV_PM_OPS(mei_vsc_pm_ops, mei_vsc_suspend, mei_vsc_resume); -- cgit v1.2.3 From af076156ec6d70332f1555754e99d4a3771ec297 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 3 Jun 2024 22:50:50 +0200 Subject: mei: vsc: Fix wrong invocation of ACPI SID method When using an initializer for a union only one of the union members must be initialized. The initializer for the acpi_object union variable passed as argument to the SID ACPI method was initializing both the type and the integer members of the union. Unfortunately rather then complaining about this gcc simply ignores the first initializer and only used the second integer.value = 1 initializer. Leaving type set to 0 which leads to the argument being skipped by acpi acpi_ns_evaluate() resulting in: ACPI Warning: \_SB.PC00.SPI1.SPFD.CVFD.SID: Insufficient arguments - Caller passed 0, method requires 1 (20240322/nsarguments-232) Fix this by initializing only the integer struct part of the union and initializing both members of the integer struct. Signed-off-by: Hans de Goede Reviewed-by: Sakari Ailus Fixes: 566f5ca97680 ("mei: Add transport driver for IVSC device") Reviewed-by: Wentong Wu Link: https://lore.kernel.org/r/20240603205050.505389-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/vsc-fw-loader.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/mei/vsc-fw-loader.c b/drivers/misc/mei/vsc-fw-loader.c index ffa4ccd96a10..596a9d695dfc 100644 --- a/drivers/misc/mei/vsc-fw-loader.c +++ b/drivers/misc/mei/vsc-fw-loader.c @@ -252,7 +252,7 @@ static int vsc_get_sensor_name(struct vsc_fw_loader *fw_loader, { struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER }; union acpi_object obj = { - .type = ACPI_TYPE_INTEGER, + .integer.type = ACPI_TYPE_INTEGER, .integer.value = 1, }; struct acpi_object_list arg_list = { -- cgit v1.2.3 From 73fedc31fed38cb6039fd8a7efea1774143b68b0 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Mon, 13 May 2024 09:52:06 +0200 Subject: parport: amiga: Mark driver struct with __refdata to prevent section mismatch MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As described in the added code comment, a reference to .exit.text is ok for drivers registered via module_platform_driver_probe(). Make this explicit to prevent the following section mismatch warning WARNING: modpost: drivers/parport/parport_amiga: section mismatch in reference: amiga_parallel_driver+0x8 (section: .data) -> amiga_parallel_remove (section: .exit.text) that triggers on an allmodconfig W=1 build. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20240513075206.2337310-2-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman --- drivers/parport/parport_amiga.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/parport/parport_amiga.c b/drivers/parport/parport_amiga.c index e6dc857aac3f..e06c7b2aac5c 100644 --- a/drivers/parport/parport_amiga.c +++ b/drivers/parport/parport_amiga.c @@ -229,7 +229,13 @@ static void __exit amiga_parallel_remove(struct platform_device *pdev) parport_put_port(port); } -static struct platform_driver amiga_parallel_driver = { +/* + * amiga_parallel_remove() lives in .exit.text. For drivers registered via + * module_platform_driver_probe() this is ok because they cannot get unbound at + * runtime. So mark the driver struct with __refdata to prevent modpost + * triggering a section mismatch warning. + */ +static struct platform_driver amiga_parallel_driver __refdata = { .remove_new = __exit_p(amiga_parallel_remove), .driver = { .name = "amiga-parallel", -- cgit v1.2.3 From 086c6cbcc563c81d55257f9b27e14faf1d0963d3 Mon Sep 17 00:00:00 2001 From: Yongzhi Liu Date: Thu, 23 May 2024 20:14:33 +0800 Subject: misc: microchip: pci1xxxx: fix double free in the error handling of gp_aux_bus_probe() When auxiliary_device_add() returns error and then calls auxiliary_device_uninit(), callback function gp_auxiliary_device_release() calls ida_free() and kfree(aux_device_wrapper) to free memory. We should't call them again in the error handling path. Fix this by skipping the redundant cleanup functions. Fixes: 393fc2f5948f ("misc: microchip: pci1xxxx: load auxiliary bus driver for the PIO function in the multi-function endpoint of pci1xxxx device.") Signed-off-by: Yongzhi Liu Link: https://lore.kernel.org/r/20240523121434.21855-3-hyperlyzcs@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c b/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c index 32af2b14ff34..de75d89ef53e 100644 --- a/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c +++ b/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c @@ -111,6 +111,7 @@ static int gp_aux_bus_probe(struct pci_dev *pdev, const struct pci_device_id *id err_aux_dev_add_1: auxiliary_device_uninit(&aux_bus->aux_device_wrapper[1]->aux_dev); + goto err_aux_dev_add_0; err_aux_dev_init_1: ida_free(&gp_client_ida, aux_bus->aux_device_wrapper[1]->aux_dev.id); @@ -120,6 +121,7 @@ err_ida_alloc_1: err_aux_dev_add_0: auxiliary_device_uninit(&aux_bus->aux_device_wrapper[0]->aux_dev); + goto err_ret; err_aux_dev_init_0: ida_free(&gp_client_ida, aux_bus->aux_device_wrapper[0]->aux_dev.id); @@ -127,6 +129,7 @@ err_aux_dev_init_0: err_ida_alloc_0: kfree(aux_bus->aux_device_wrapper[0]); +err_ret: return retval; } -- cgit v1.2.3 From 77427e3d5c353e3dd98c7c0af322f8d9e3131ace Mon Sep 17 00:00:00 2001 From: Yongzhi Liu Date: Thu, 23 May 2024 20:14:34 +0800 Subject: misc: microchip: pci1xxxx: Fix a memory leak in the error handling of gp_aux_bus_probe() There is a memory leak (forget to free allocated buffers) in a memory allocation failure path. Fix it to jump to the correct error handling code. Fixes: 393fc2f5948f ("misc: microchip: pci1xxxx: load auxiliary bus driver for the PIO function in the multi-function endpoint of pci1xxxx device.") Signed-off-by: Yongzhi Liu Reviewed-by: Kumaravel Thiagarajan Link: https://lore.kernel.org/r/20240523121434.21855-4-hyperlyzcs@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c b/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c index de75d89ef53e..34c9be437432 100644 --- a/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c +++ b/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c @@ -69,8 +69,10 @@ static int gp_aux_bus_probe(struct pci_dev *pdev, const struct pci_device_id *id aux_bus->aux_device_wrapper[1] = kzalloc(sizeof(*aux_bus->aux_device_wrapper[1]), GFP_KERNEL); - if (!aux_bus->aux_device_wrapper[1]) - return -ENOMEM; + if (!aux_bus->aux_device_wrapper[1]) { + retval = -ENOMEM; + goto err_aux_dev_add_0; + } retval = ida_alloc(&gp_client_ida, GFP_KERNEL); if (retval < 0) -- cgit v1.2.3 From 616501eccb58615f8f352a29239ea6c6fc5e6546 Mon Sep 17 00:00:00 2001 From: "Russell King (Oracle)" Date: Mon, 27 May 2024 09:00:06 +0100 Subject: clkdev: don't fail clkdev_alloc() if over-sized Don't fail clkdev_alloc() if the strings are over-sized. In this case, the entry will not match during lookup, so its useless. However, since code fails if we return NULL leading to boot failure, return a dummy entry with the connection and device IDs set to "bad". Leave the warning so these problems can be found, and the useless wasteful clkdev registrations removed. Reported-by: Ron Economos Reported-by: Guenter Roeck Fixes: 8d532528ff6a ("clkdev: report over-sized strings when creating clkdev entries") Closes: https://lore.kernel.org/linux-clk/7eda7621-0dde-4153-89e4-172e4c095d01@roeck-us.net. Link: https://lore.kernel.org/r/28114882-f8d7-21bf-4536-a186e8d7a22a@w6rz.net Tested-by: Ron Economos Signed-off-by: Russell King (Oracle) --- drivers/clk/clkdev.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/clkdev.c b/drivers/clk/clkdev.c index 56a12f1da472..476fb9b7adb5 100644 --- a/drivers/clk/clkdev.c +++ b/drivers/clk/clkdev.c @@ -204,8 +204,15 @@ fail: pr_err("%pV:%s: %s ID is greater than %zu\n", &vaf, con_id, failure, max_size); va_end(ap_copy); - kfree(cla); - return NULL; + + /* + * Don't fail in this case, but as the entry won't ever match just + * fill it with something that also won't match. + */ + strscpy(cla->con_id, "bad", sizeof(cla->con_id)); + strscpy(cla->dev_id, "bad", sizeof(cla->dev_id)); + + return &cla->cl; } static struct clk_lookup * -- cgit v1.2.3 From c0a40097f0bc81deafc15f9195d1fb54595cd6d0 Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Mon, 13 May 2024 07:06:34 +0200 Subject: drivers: core: synchronize really_probe() and dev_uevent() Synchronize the dev->driver usage in really_probe() and dev_uevent(). These can run in different threads, what can result in the following race condition for dev->driver uninitialization: Thread #1: ========== really_probe() { ... probe_failed: ... device_unbind_cleanup(dev) { ... dev->driver = NULL; // <= Failed probe sets dev->driver to NULL ... } ... } Thread #2: ========== dev_uevent() { ... if (dev->driver) // If dev->driver is NULLed from really_probe() from here on, // after above check, the system crashes add_uevent_var(env, "DRIVER=%s", dev->driver->name); ... } really_probe() holds the lock, already. So nothing needs to be done there. dev_uevent() is called with lock held, often, too. But not always. What implies that we can't add any locking in dev_uevent() itself. So fix this race by adding the lock to the non-protected path. This is the path where above race is observed: dev_uevent+0x235/0x380 uevent_show+0x10c/0x1f0 <= Add lock here dev_attr_show+0x3a/0xa0 sysfs_kf_seq_show+0x17c/0x250 kernfs_seq_show+0x7c/0x90 seq_read_iter+0x2d7/0x940 kernfs_fop_read_iter+0xc6/0x310 vfs_read+0x5bc/0x6b0 ksys_read+0xeb/0x1b0 __x64_sys_read+0x42/0x50 x64_sys_call+0x27ad/0x2d30 do_syscall_64+0xcd/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Similar cases are reported by syzkaller in https://syzkaller.appspot.com/bug?extid=ffa8143439596313a85a But these are regarding the *initialization* of dev->driver dev->driver = drv; As this switches dev->driver to non-NULL these reports can be considered to be false-positives (which should be "fixed" by this commit, as well, though). The same issue was reported and tried to be fixed back in 2015 in https://lore.kernel.org/lkml/1421259054-2574-1-git-send-email-a.sangwan@samsung.com/ already. Fixes: 239378f16aa1 ("Driver core: add uevent vars for devices of a class") Cc: stable Cc: syzbot+ffa8143439596313a85a@syzkaller.appspotmail.com Cc: Ashish Sangwan Cc: Namjae Jeon Signed-off-by: Dirk Behme Link: https://lore.kernel.org/r/20240513050634.3964461-1-dirk.behme@de.bosch.com Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/base/core.c b/drivers/base/core.c index 2e776fcc31b6..2b4c0624b704 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -2739,8 +2739,11 @@ static ssize_t uevent_show(struct device *dev, struct device_attribute *attr, if (!env) return -ENOMEM; + /* Synchronize with really_probe() */ + device_lock(dev); /* let the kset specific function add its keys */ retval = kset->uevent_ops->uevent(&dev->kobj, env); + device_unlock(dev); if (retval) goto out; -- cgit v1.2.3 From c9d52fb313d3719d69a040f4ca78a3e2e95fba21 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 30 May 2024 18:04:24 -0700 Subject: PCI: Revert the cfg_access_lock lockdep mechanism While the experiment did reveal that there are additional places that are missing the lock during secondary bus reset, one of the places that needs to take cfg_access_lock (pci_bus_lock()) is not prepared for lockdep annotation. Specifically, pci_bus_lock() takes pci_dev_lock() recursively and is currently dependent on the fact that the device_lock() is marked lockdep_set_novalidate_class(&dev->mutex). Otherwise, without that annotation, pci_bus_lock() would need to use something like a new pci_dev_lock_nested() helper, a scheme to track a PCI device's depth in the topology, and a hope that the depth of a PCI tree never exceeds the max value for a lockdep subclass. The alternative to ripping out the lockdep coverage would be to deploy a dynamic lock key for every PCI device. Unfortunately, there is evidence that increasing the number of keys that lockdep needs to track to be per-PCI-device is prohibitively expensive for something like the cfg_access_lock. The main motivation for adding the annotation in the first place was to catch unlocked secondary bus resets, not necessarily catch lock ordering problems between cfg_access_lock and other locks. Solve that narrower problem with follow-on patches, and just due to targeted revert for now. Link: https://lore.kernel.org/r/171711746402.1628941.14575335981264103013.stgit@dwillia2-xfh.jf.intel.com Fixes: 7e89efc6e9e4 ("PCI: Lock upstream bridge for pci_reset_function()") Reported-by: Imre Deak Closes: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_134186v1/shard-dg2-1/igt@device_reset@unbind-reset-rebind.html Signed-off-by: Dan Williams Signed-off-by: Bjorn Helgaas Tested-by: Hans de Goede Tested-by: Kalle Valo Reviewed-by: Dave Jiang Cc: Jani Saarinen --- drivers/pci/access.c | 4 ---- drivers/pci/pci.c | 1 - drivers/pci/probe.c | 3 --- include/linux/lockdep.h | 5 ----- include/linux/pci.h | 2 -- 5 files changed, 15 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/access.c b/drivers/pci/access.c index 30f031de9cfe..b123da16b63b 100644 --- a/drivers/pci/access.c +++ b/drivers/pci/access.c @@ -289,8 +289,6 @@ void pci_cfg_access_lock(struct pci_dev *dev) { might_sleep(); - lock_map_acquire(&dev->cfg_access_lock); - raw_spin_lock_irq(&pci_lock); if (dev->block_cfg_access) pci_wait_cfg(dev); @@ -345,8 +343,6 @@ void pci_cfg_access_unlock(struct pci_dev *dev) raw_spin_unlock_irqrestore(&pci_lock, flags); wake_up_all(&pci_cfg_wait); - - lock_map_release(&dev->cfg_access_lock); } EXPORT_SYMBOL_GPL(pci_cfg_access_unlock); diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 59e0949fb079..35fb1f17a589 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -4883,7 +4883,6 @@ void __weak pcibios_reset_secondary_bus(struct pci_dev *dev) */ int pci_bridge_secondary_bus_reset(struct pci_dev *dev) { - lock_map_assert_held(&dev->cfg_access_lock); pcibios_reset_secondary_bus(dev); return pci_bridge_wait_for_secondary_bus(dev, "bus reset"); diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 8e696e547565..5fbabb4e3425 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -2546,9 +2546,6 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus) dev->dev.dma_mask = &dev->dma_mask; dev->dev.dma_parms = &dev->dma_parms; dev->dev.coherent_dma_mask = 0xffffffffull; - lockdep_register_key(&dev->cfg_access_key); - lockdep_init_map(&dev->cfg_access_lock, dev_name(&dev->dev), - &dev->cfg_access_key, 0); dma_set_max_seg_size(&dev->dev, 65536); dma_set_seg_boundary(&dev->dev, 0xffffffff); diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h index 5e51b0de4c4b..08b0d1d9d78b 100644 --- a/include/linux/lockdep.h +++ b/include/linux/lockdep.h @@ -297,9 +297,6 @@ extern void lock_unpin_lock(struct lockdep_map *lock, struct pin_cookie); .wait_type_inner = _wait_type, \ .lock_type = LD_LOCK_WAIT_OVERRIDE, } -#define lock_map_assert_held(l) \ - lockdep_assert(lock_is_held(l) != LOCK_STATE_NOT_HELD) - #else /* !CONFIG_LOCKDEP */ static inline void lockdep_init_task(struct task_struct *task) @@ -391,8 +388,6 @@ extern int lockdep_is_held(const void *); #define DEFINE_WAIT_OVERRIDE_MAP(_name, _wait_type) \ struct lockdep_map __maybe_unused _name = {} -#define lock_map_assert_held(l) do { (void)(l); } while (0) - #endif /* !LOCKDEP */ #ifdef CONFIG_PROVE_LOCKING diff --git a/include/linux/pci.h b/include/linux/pci.h index fb004fd4e889..cafc5ab1cbcb 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -413,8 +413,6 @@ struct pci_dev { struct resource driver_exclusive_resource; /* driver exclusive resource ranges */ bool match_driver; /* Skip attaching driver */ - struct lock_class_key cfg_access_key; - struct lockdep_map cfg_access_lock; unsigned int transparent:1; /* Subtractive decode bridge */ unsigned int io_window:1; /* Bridge has I/O window */ -- cgit v1.2.3 From 0ea00e249ca992adee54dc71a526ee70ef109e40 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 29 May 2024 15:23:25 +0300 Subject: tpm_tis: Do *not* flush uninitialized work tpm_tis_core_init() may fail before tpm_tis_probe_irq_single() is called, in which case tpm_tis_remove() unconditionally calling flush_work() is triggering a warning for .func still being NULL. Cc: stable@vger.kernel.org # v6.5+ Fixes: 481c2d14627d ("tpm,tpm_tis: Disable interrupts after 1000 unhandled IRQs") Signed-off-by: Jan Beulich Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen --- drivers/char/tpm/tpm_tis_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c index 176cd8dbf1db..fdef214b9f6b 100644 --- a/drivers/char/tpm/tpm_tis_core.c +++ b/drivers/char/tpm/tpm_tis_core.c @@ -1020,7 +1020,8 @@ void tpm_tis_remove(struct tpm_chip *chip) interrupt = 0; tpm_tis_write32(priv, reg, ~TPM_GLOBAL_INT_ENABLE & interrupt); - flush_work(&priv->free_irq_work); + if (priv->free_irq_work.func) + flush_work(&priv->free_irq_work); tpm_tis_clkrun_enable(chip, false); -- cgit v1.2.3 From f071d02ecad4cfbf3ab41807c90bd1fef1cbfd3f Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Wed, 5 Jun 2024 01:28:42 +0300 Subject: tpm: Switch to new Intel CPU model defines New CPU #defines encode vendor and family as well as model. Link: https://lore.kernel.org/all/20240520224620.9480-4-tony.luck@intel.com/ Signed-off-by: Tony Luck Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen --- drivers/char/tpm/tpm.h | 2 +- drivers/char/tpm/tpm_tis_core.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h index 6b8b9956ba69..7bb87fa5f7a1 100644 --- a/drivers/char/tpm/tpm.h +++ b/drivers/char/tpm/tpm.h @@ -28,7 +28,7 @@ #include #ifdef CONFIG_X86 -#include +#include #endif #define TPM_MINOR 224 /* officially assigned */ diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h index 13e99cf65efe..690ad8e9b731 100644 --- a/drivers/char/tpm/tpm_tis_core.h +++ b/drivers/char/tpm/tpm_tis_core.h @@ -210,7 +210,7 @@ static inline int tpm_tis_verify_crc(struct tpm_tis_data *data, size_t len, static inline bool is_bsw(void) { #ifdef CONFIG_X86 - return ((boot_cpu_data.x86_model == INTEL_FAM6_ATOM_AIRMONT) ? 1 : 0); + return (boot_cpu_data.x86_vfm == INTEL_ATOM_AIRMONT) ? 1 : 0; #else return false; #endif -- cgit v1.2.3 From 99280413a5b785f22d91e8a8a66dc38f4a214495 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Tue, 4 Jun 2024 17:45:20 +0200 Subject: efi: Add missing __nocfi annotations to runtime wrappers The EFI runtime wrappers are a sandbox for calling into EFI runtime services, which are invoked using indirect calls. When running with kCFI enabled, the compiler will require the target of any indirect call to be type annotated. Given that the EFI runtime services prototypes and calling convention are governed by the EFI spec, not the Linux kernel, adding such type annotations for firmware routines is infeasible, and so the compiler must be informed that prototype validation should be omitted. Add the __nocfi annotation at the appropriate places in the EFI runtime wrapper code to achieve this. Note that this currently only affects 32-bit ARM, given that other architectures that support both kCFI and EFI use an asm wrapper to call EFI runtime services, and this hides the indirect call from the compiler. Fixes: 1a4fec49efe5 ("ARM: 9392/2: Support CLANG CFI") Reviewed-by: Linus Walleij Tested-by: Nathan Chancellor Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/runtime-wrappers.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/efi/runtime-wrappers.c b/drivers/firmware/efi/runtime-wrappers.c index 5d56bc40a79d..708b777857d3 100644 --- a/drivers/firmware/efi/runtime-wrappers.c +++ b/drivers/firmware/efi/runtime-wrappers.c @@ -213,7 +213,7 @@ extern struct semaphore __efi_uv_runtime_lock __alias(efi_runtime_lock); * Calls the appropriate efi_runtime_service() with the appropriate * arguments. */ -static void efi_call_rts(struct work_struct *work) +static void __nocfi efi_call_rts(struct work_struct *work) { const union efi_rts_args *args = efi_rts_work.args; efi_status_t status = EFI_NOT_FOUND; @@ -435,7 +435,7 @@ static efi_status_t virt_efi_set_variable(efi_char16_t *name, return status; } -static efi_status_t +static efi_status_t __nocfi virt_efi_set_variable_nb(efi_char16_t *name, efi_guid_t *vendor, u32 attr, unsigned long data_size, void *data) { @@ -469,7 +469,7 @@ static efi_status_t virt_efi_query_variable_info(u32 attr, return status; } -static efi_status_t +static efi_status_t __nocfi virt_efi_query_variable_info_nb(u32 attr, u64 *storage_space, u64 *remaining_space, u64 *max_variable_size) { @@ -499,10 +499,9 @@ static efi_status_t virt_efi_get_next_high_mono_count(u32 *count) return status; } -static void virt_efi_reset_system(int reset_type, - efi_status_t status, - unsigned long data_size, - efi_char16_t *data) +static void __nocfi +virt_efi_reset_system(int reset_type, efi_status_t status, + unsigned long data_size, efi_char16_t *data) { if (down_trylock(&efi_runtime_lock)) { pr_warn("failed to invoke the reset_system() runtime service:\n" -- cgit v1.2.3 From 8b0f7410942cdc420c4557eda02bfcdf60ccec17 Mon Sep 17 00:00:00 2001 From: Subbaraya Sundeep Date: Wed, 29 May 2024 20:59:44 +0530 Subject: octeontx2-af: Always allocate PF entries from low prioriy zone PF mcam entries has to be at low priority always so that VF can install longest prefix match rules at higher priority. This was taken care currently but when priority allocation wrt reference entry is requested then entries are allocated from mid-zone instead of low priority zone. Fix this and always allocate entries from low priority zone for PFs. Fixes: 7df5b4b260dd ("octeontx2-af: Allocate low priority entries for PF") Signed-off-by: Subbaraya Sundeep Reviewed-by: Jacob Keller Signed-off-by: David S. Miller --- .../net/ethernet/marvell/octeontx2/af/rvu_npc.c | 33 ++++++++++++++-------- 1 file changed, 22 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c index e8b73b9d75e3..97722ce8c4cb 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c @@ -2519,7 +2519,17 @@ static int npc_mcam_alloc_entries(struct npc_mcam *mcam, u16 pcifunc, * - when available free entries are less. * Lower priority ones out of avaialble free entries are always * chosen when 'high vs low' question arises. + * + * For a VF base MCAM match rule is set by its PF. And all the + * further MCAM rules installed by VF on its own are + * concatenated with the base rule set by its PF. Hence PF entries + * should be at lower priority compared to VF entries. Otherwise + * base rule is hit always and rules installed by VF will be of + * no use. Hence if the request is from PF then allocate low + * priority entries. */ + if (!(pcifunc & RVU_PFVF_FUNC_MASK)) + goto lprio_alloc; /* Get the search range for priority allocation request */ if (req->priority) { @@ -2528,17 +2538,6 @@ static int npc_mcam_alloc_entries(struct npc_mcam *mcam, u16 pcifunc, goto alloc; } - /* For a VF base MCAM match rule is set by its PF. And all the - * further MCAM rules installed by VF on its own are - * concatenated with the base rule set by its PF. Hence PF entries - * should be at lower priority compared to VF entries. Otherwise - * base rule is hit always and rules installed by VF will be of - * no use. Hence if the request is from PF and NOT a priority - * allocation request then allocate low priority entries. - */ - if (!(pcifunc & RVU_PFVF_FUNC_MASK)) - goto lprio_alloc; - /* Find out the search range for non-priority allocation request * * Get MCAM free entry count in middle zone. @@ -2568,6 +2567,18 @@ lprio_alloc: reverse = true; start = 0; end = mcam->bmap_entries; + /* Ensure PF requests are always at bottom and if PF requests + * for higher/lower priority entry wrt reference entry then + * honour that criteria and start search for entries from bottom + * and not in mid zone. + */ + if (!(pcifunc & RVU_PFVF_FUNC_MASK) && + req->priority == NPC_MCAM_HIGHER_PRIO) + end = req->ref_entry; + + if (!(pcifunc & RVU_PFVF_FUNC_MASK) && + req->priority == NPC_MCAM_LOWER_PRIO) + start = req->ref_entry; } alloc: -- cgit v1.2.3 From 0a8d3f2e3e8d8aea8af017e14227b91d5989b696 Mon Sep 17 00:00:00 2001 From: Tristram Ha Date: Thu, 30 May 2024 18:38:01 -0700 Subject: net: phy: Micrel KSZ8061: fix errata solution not taking effect problem KSZ8061 needs to write to a MMD register at driver initialization to fix an errata. This worked in 5.0 kernel but not in newer kernels. The issue is the main phylib code no longer resets PHY at the very beginning. Calling phy resuming code later will reset the chip if it is already powered down at the beginning. This wipes out the MMD register write. Solution is to implement a phy resume function for KSZ8061 to take care of this problem. Fixes: 232ba3a51cc2 ("net: phy: Micrel KSZ8061: link failure after cable connect") Signed-off-by: Tristram Ha Signed-off-by: David S. Miller --- drivers/net/phy/micrel.c | 42 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 41 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 8c20cf937530..5aada7cf3da7 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -866,6 +866,17 @@ static int ksz8061_config_init(struct phy_device *phydev) { int ret; + /* Chip can be powered down by the bootstrap code. */ + ret = phy_read(phydev, MII_BMCR); + if (ret < 0) + return ret; + if (ret & BMCR_PDOWN) { + ret = phy_write(phydev, MII_BMCR, ret & ~BMCR_PDOWN); + if (ret < 0) + return ret; + usleep_range(1000, 2000); + } + ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_DEVID1, 0xB61A); if (ret) return ret; @@ -2135,6 +2146,35 @@ static int ksz9477_resume(struct phy_device *phydev) return 0; } +static int ksz8061_resume(struct phy_device *phydev) +{ + int ret; + + /* This function can be called twice when the Ethernet device is on. */ + ret = phy_read(phydev, MII_BMCR); + if (ret < 0) + return ret; + if (!(ret & BMCR_PDOWN)) + return 0; + + genphy_resume(phydev); + usleep_range(1000, 2000); + + /* Re-program the value after chip is reset. */ + ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_DEVID1, 0xB61A); + if (ret) + return ret; + + /* Enable PHY Interrupts */ + if (phy_interrupt_is_valid(phydev)) { + phydev->interrupts = PHY_INTERRUPT_ENABLED; + if (phydev->drv->config_intr) + phydev->drv->config_intr(phydev); + } + + return 0; +} + static int kszphy_probe(struct phy_device *phydev) { const struct kszphy_type *type = phydev->drv->driver_data; @@ -5389,7 +5429,7 @@ static struct phy_driver ksphy_driver[] = { .config_intr = kszphy_config_intr, .handle_interrupt = kszphy_handle_interrupt, .suspend = kszphy_suspend, - .resume = kszphy_resume, + .resume = ksz8061_resume, }, { .phy_id = PHY_ID_KSZ9021, .phy_id_mask = 0x000ffffe, -- cgit v1.2.3 From 491aee894a08bc9b8bb52e7363b9d4bc6403f363 Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Mon, 3 Jun 2024 04:57:55 +0000 Subject: ionic: fix kernel panic in XDP_TX action In the XDP_TX path, ionic driver sends a packet to the TX path with rx page and corresponding dma address. After tx is done, ionic_tx_clean() frees that page. But RX ring buffer isn't reset to NULL. So, it uses a freed page, which causes kernel panic. BUG: unable to handle page fault for address: ffff8881576c110c PGD 773801067 P4D 773801067 PUD 87f086067 PMD 87efca067 PTE 800ffffea893e060 Oops: Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI CPU: 1 PID: 25 Comm: ksoftirqd/1 Not tainted 6.9.0+ #11 Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f Code: 00 53 41 55 41 56 41 57 b8 01 00 00 00 48 8b 5f 08 4c 8b 77 00 4c 89 f7 48 83 c7 0e 48 39 d8 RSP: 0018:ffff888104e6fa28 EFLAGS: 00010283 RAX: 0000000000000002 RBX: ffff8881576c1140 RCX: 0000000000000002 RDX: ffffffffc0051f64 RSI: ffffc90002d33048 RDI: ffff8881576c110e RBP: ffff888104e6fa88 R08: 0000000000000000 R09: ffffed1027a04a23 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881b03a21a8 R13: ffff8881589f800f R14: ffff8881576c1100 R15: 00000001576c1100 FS: 0000000000000000(0000) GS:ffff88881ae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8881576c110c CR3: 0000000767a90000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: ? __die+0x20/0x70 ? page_fault_oops+0x254/0x790 ? __pfx_page_fault_oops+0x10/0x10 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? search_bpf_extables+0x165/0x260 ? fixup_exception+0x4a/0x970 ? exc_page_fault+0xcb/0xe0 ? asm_exc_page_fault+0x22/0x30 ? 0xffffffffc0051f64 ? bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f ? do_raw_spin_unlock+0x54/0x220 ionic_rx_service+0x11ab/0x3010 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? ionic_tx_clean+0x29b/0xc60 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_tx_clean+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? ionic_tx_cq_service+0x25d/0xa00 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ionic_cq_service+0x69/0x150 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ionic_txrx_napi+0x11a/0x540 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] __napi_poll.constprop.0+0xa0/0x440 net_rx_action+0x7e7/0xc30 ? __pfx_net_rx_action+0x10/0x10 Fixes: 8eeed8373e1c ("ionic: Add XDP_TX support") Signed-off-by: Taehee Yoo Reviewed-by: Shannon Nelson Reviewed-by: Brett Creeley Signed-off-by: David S. Miller --- drivers/net/ethernet/pensando/ionic/ionic_txrx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/pensando/ionic/ionic_txrx.c b/drivers/net/ethernet/pensando/ionic/ionic_txrx.c index 5dba6d2d633c..2427610f4306 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_txrx.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_txrx.c @@ -586,6 +586,7 @@ static bool ionic_run_xdp(struct ionic_rx_stats *stats, netdev_dbg(netdev, "tx ionic_xdp_post_frame err %d\n", err); goto out_xdp_abort; } + buf_info->page = NULL; stats->xdp_tx++; /* the Tx completion will free the buffers */ -- cgit v1.2.3 From 1cd4bc987abb2823836cbb8f887026011ccddc8a Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Mon, 3 Jun 2024 10:59:26 +0200 Subject: vxlan: Fix regression when dropping packets due to invalid src addresses Commit f58f45c1e5b9 ("vxlan: drop packets from invalid src-address") has recently been added to vxlan mainly in the context of source address snooping/learning so that when it is enabled, an entry in the FDB is not being created for an invalid address for the corresponding tunnel endpoint. Before commit f58f45c1e5b9 vxlan was similarly behaving as geneve in that it passed through whichever macs were set in the L2 header. It turns out that this change in behavior breaks setups, for example, Cilium with netkit in L3 mode for Pods as well as tunnel mode has been passing before the change in f58f45c1e5b9 for both vxlan and geneve. After mentioned change it is only passing for geneve as in case of vxlan packets are dropped due to vxlan_set_mac() returning false as source and destination macs are zero which for E/W traffic via tunnel is totally fine. Fix it by only opting into the is_valid_ether_addr() check in vxlan_set_mac() when in fact source address snooping/learning is actually enabled in vxlan. This is done by moving the check into vxlan_snoop(). With this change, the Cilium connectivity test suite passes again for both tunnel flavors. Fixes: f58f45c1e5b9 ("vxlan: drop packets from invalid src-address") Signed-off-by: Daniel Borkmann Cc: David Bauer Cc: Ido Schimmel Cc: Nikolay Aleksandrov Cc: Martin KaFai Lau Reviewed-by: Ido Schimmel Reviewed-by: Nikolay Aleksandrov Reviewed-by: David Bauer Signed-off-by: David S. Miller --- drivers/net/vxlan/vxlan_core.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vxlan/vxlan_core.c b/drivers/net/vxlan/vxlan_core.c index f78dd0438843..567cb3faab70 100644 --- a/drivers/net/vxlan/vxlan_core.c +++ b/drivers/net/vxlan/vxlan_core.c @@ -1446,6 +1446,10 @@ static bool vxlan_snoop(struct net_device *dev, struct vxlan_fdb *f; u32 ifindex = 0; + /* Ignore packets from invalid src-address */ + if (!is_valid_ether_addr(src_mac)) + return true; + #if IS_ENABLED(CONFIG_IPV6) if (src_ip->sa.sa_family == AF_INET6 && (ipv6_addr_type(&src_ip->sin6.sin6_addr) & IPV6_ADDR_LINKLOCAL)) @@ -1616,10 +1620,6 @@ static bool vxlan_set_mac(struct vxlan_dev *vxlan, if (ether_addr_equal(eth_hdr(skb)->h_source, vxlan->dev->dev_addr)) return false; - /* Ignore packets from invalid src-address */ - if (!is_valid_ether_addr(eth_hdr(skb)->h_source)) - return false; - /* Get address from the outer IP header */ if (vxlan_get_sk_family(vs) == AF_INET) { saddr.sin.sin_addr.s_addr = ip_hdr(skb)->saddr; -- cgit v1.2.3 From c57e558194430d10d5e5f4acd8a8655b68dade13 Mon Sep 17 00:00:00 2001 From: Frank Wunderlich Date: Mon, 3 Jun 2024 21:25:05 +0200 Subject: net: ethernet: mtk_eth_soc: handle dma buffer size soc specific The mainline MTK ethernet driver suffers long time from rarly but annoying tx queue timeouts. We think that this is caused by fixed dma sizes hardcoded for all SoCs. We suspect this problem arises from a low level of free TX DMADs, the TX Ring alomost full. The transmit timeout is caused by the Tx queue not waking up. The Tx queue stops when the free counter is less than ring->thres, and it will wake up once the free counter is greater than ring->thres. If the CPU is too late to wake up the Tx queues, it may cause a transmit timeout. Therefore, we increased the TX and RX DMADs to improve this error situation. Use the dma-size implementation from SDK in a per SoC manner. In difference to SDK we have no RSS feature yet, so all RX/TX sizes should be raised from 512 to 2048 byte except fqdma on mt7988 to avoid the tx timeout issue. Fixes: 656e705243fd ("net-next: mediatek: add support for MT7623 ethernet") Suggested-by: Daniel Golle Signed-off-by: Frank Wunderlich Reviewed-by: Jacob Keller Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 104 +++++++++++++++++++--------- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 9 ++- 2 files changed, 77 insertions(+), 36 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index cae46290a7ae..c84ce54a84a0 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1131,9 +1131,9 @@ static int mtk_init_fq_dma(struct mtk_eth *eth) { const struct mtk_soc_data *soc = eth->soc; dma_addr_t phy_ring_tail; - int cnt = MTK_QDMA_RING_SIZE; + int cnt = soc->tx.fq_dma_size; dma_addr_t dma_addr; - int i; + int i, j, len; if (MTK_HAS_CAPS(eth->soc->caps, MTK_SRAM)) eth->scratch_ring = eth->sram_base; @@ -1142,40 +1142,46 @@ static int mtk_init_fq_dma(struct mtk_eth *eth) cnt * soc->tx.desc_size, ð->phy_scratch_ring, GFP_KERNEL); + if (unlikely(!eth->scratch_ring)) return -ENOMEM; - eth->scratch_head = kcalloc(cnt, MTK_QDMA_PAGE_SIZE, GFP_KERNEL); - if (unlikely(!eth->scratch_head)) - return -ENOMEM; + phy_ring_tail = eth->phy_scratch_ring + soc->tx.desc_size * (cnt - 1); - dma_addr = dma_map_single(eth->dma_dev, - eth->scratch_head, cnt * MTK_QDMA_PAGE_SIZE, - DMA_FROM_DEVICE); - if (unlikely(dma_mapping_error(eth->dma_dev, dma_addr))) - return -ENOMEM; + for (j = 0; j < DIV_ROUND_UP(soc->tx.fq_dma_size, MTK_FQ_DMA_LENGTH); j++) { + len = min_t(int, cnt - j * MTK_FQ_DMA_LENGTH, MTK_FQ_DMA_LENGTH); + eth->scratch_head[j] = kcalloc(len, MTK_QDMA_PAGE_SIZE, GFP_KERNEL); - phy_ring_tail = eth->phy_scratch_ring + soc->tx.desc_size * (cnt - 1); + if (unlikely(!eth->scratch_head[j])) + return -ENOMEM; - for (i = 0; i < cnt; i++) { - dma_addr_t addr = dma_addr + i * MTK_QDMA_PAGE_SIZE; - struct mtk_tx_dma_v2 *txd; + dma_addr = dma_map_single(eth->dma_dev, + eth->scratch_head[j], len * MTK_QDMA_PAGE_SIZE, + DMA_FROM_DEVICE); - txd = eth->scratch_ring + i * soc->tx.desc_size; - txd->txd1 = addr; - if (i < cnt - 1) - txd->txd2 = eth->phy_scratch_ring + - (i + 1) * soc->tx.desc_size; + if (unlikely(dma_mapping_error(eth->dma_dev, dma_addr))) + return -ENOMEM; - txd->txd3 = TX_DMA_PLEN0(MTK_QDMA_PAGE_SIZE); - if (MTK_HAS_CAPS(soc->caps, MTK_36BIT_DMA)) - txd->txd3 |= TX_DMA_PREP_ADDR64(addr); - txd->txd4 = 0; - if (mtk_is_netsys_v2_or_greater(eth)) { - txd->txd5 = 0; - txd->txd6 = 0; - txd->txd7 = 0; - txd->txd8 = 0; + for (i = 0; i < cnt; i++) { + struct mtk_tx_dma_v2 *txd; + + txd = eth->scratch_ring + (j * MTK_FQ_DMA_LENGTH + i) * soc->tx.desc_size; + txd->txd1 = dma_addr + i * MTK_QDMA_PAGE_SIZE; + if (j * MTK_FQ_DMA_LENGTH + i < cnt) + txd->txd2 = eth->phy_scratch_ring + + (j * MTK_FQ_DMA_LENGTH + i + 1) * soc->tx.desc_size; + + txd->txd3 = TX_DMA_PLEN0(MTK_QDMA_PAGE_SIZE); + if (MTK_HAS_CAPS(soc->caps, MTK_36BIT_DMA)) + txd->txd3 |= TX_DMA_PREP_ADDR64(dma_addr + i * MTK_QDMA_PAGE_SIZE); + + txd->txd4 = 0; + if (mtk_is_netsys_v2_or_greater(eth)) { + txd->txd5 = 0; + txd->txd6 = 0; + txd->txd7 = 0; + txd->txd8 = 0; + } } } @@ -2457,7 +2463,7 @@ static int mtk_tx_alloc(struct mtk_eth *eth) if (MTK_HAS_CAPS(soc->caps, MTK_QDMA)) ring_size = MTK_QDMA_RING_SIZE; else - ring_size = MTK_DMA_SIZE; + ring_size = soc->tx.dma_size; ring->buf = kcalloc(ring_size, sizeof(*ring->buf), GFP_KERNEL); @@ -2465,8 +2471,8 @@ static int mtk_tx_alloc(struct mtk_eth *eth) goto no_tx_mem; if (MTK_HAS_CAPS(soc->caps, MTK_SRAM)) { - ring->dma = eth->sram_base + ring_size * sz; - ring->phys = eth->phy_scratch_ring + ring_size * (dma_addr_t)sz; + ring->dma = eth->sram_base + soc->tx.fq_dma_size * sz; + ring->phys = eth->phy_scratch_ring + soc->tx.fq_dma_size * (dma_addr_t)sz; } else { ring->dma = dma_alloc_coherent(eth->dma_dev, ring_size * sz, &ring->phys, GFP_KERNEL); @@ -2588,6 +2594,7 @@ static void mtk_tx_clean(struct mtk_eth *eth) static int mtk_rx_alloc(struct mtk_eth *eth, int ring_no, int rx_flag) { const struct mtk_reg_map *reg_map = eth->soc->reg_map; + const struct mtk_soc_data *soc = eth->soc; struct mtk_rx_ring *ring; int rx_data_len, rx_dma_size, tx_ring_size; int i; @@ -2595,7 +2602,7 @@ static int mtk_rx_alloc(struct mtk_eth *eth, int ring_no, int rx_flag) if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA)) tx_ring_size = MTK_QDMA_RING_SIZE; else - tx_ring_size = MTK_DMA_SIZE; + tx_ring_size = soc->tx.dma_size; if (rx_flag == MTK_RX_FLAGS_QDMA) { if (ring_no) @@ -2610,7 +2617,7 @@ static int mtk_rx_alloc(struct mtk_eth *eth, int ring_no, int rx_flag) rx_dma_size = MTK_HW_LRO_DMA_SIZE; } else { rx_data_len = ETH_DATA_LEN; - rx_dma_size = MTK_DMA_SIZE; + rx_dma_size = soc->rx.dma_size; } ring->frag_size = mtk_max_frag_size(rx_data_len); @@ -3139,7 +3146,10 @@ static void mtk_dma_free(struct mtk_eth *eth) mtk_rx_clean(eth, ð->rx_ring[i], false); } - kfree(eth->scratch_head); + for (i = 0; i < DIV_ROUND_UP(soc->tx.fq_dma_size, MTK_FQ_DMA_LENGTH); i++) { + kfree(eth->scratch_head[i]); + eth->scratch_head[i] = NULL; + } } static bool mtk_hw_reset_check(struct mtk_eth *eth) @@ -5052,11 +5062,14 @@ static const struct mtk_soc_data mt2701_data = { .desc_size = sizeof(struct mtk_tx_dma), .dma_max_len = MTK_TX_DMA_BUF_LEN, .dma_len_offset = 16, + .dma_size = MTK_DMA_SIZE(2K), + .fq_dma_size = MTK_DMA_SIZE(2K), }, .rx = { .desc_size = sizeof(struct mtk_rx_dma), .irq_done_mask = MTK_RX_DONE_INT, .dma_l4_valid = RX_DMA_L4_VALID, + .dma_size = MTK_DMA_SIZE(2K), .dma_max_len = MTK_TX_DMA_BUF_LEN, .dma_len_offset = 16, }, @@ -5076,11 +5089,14 @@ static const struct mtk_soc_data mt7621_data = { .desc_size = sizeof(struct mtk_tx_dma), .dma_max_len = MTK_TX_DMA_BUF_LEN, .dma_len_offset = 16, + .dma_size = MTK_DMA_SIZE(2K), + .fq_dma_size = MTK_DMA_SIZE(2K), }, .rx = { .desc_size = sizeof(struct mtk_rx_dma), .irq_done_mask = MTK_RX_DONE_INT, .dma_l4_valid = RX_DMA_L4_VALID, + .dma_size = MTK_DMA_SIZE(2K), .dma_max_len = MTK_TX_DMA_BUF_LEN, .dma_len_offset = 16, }, @@ -5102,11 +5118,14 @@ static const struct mtk_soc_data mt7622_data = { .desc_size = sizeof(struct mtk_tx_dma), .dma_max_len = MTK_TX_DMA_BUF_LEN, .dma_len_offset = 16, + .dma_size = MTK_DMA_SIZE(2K), + .fq_dma_size = MTK_DMA_SIZE(2K), }, .rx = { .desc_size = sizeof(struct mtk_rx_dma), .irq_done_mask = MTK_RX_DONE_INT, .dma_l4_valid = RX_DMA_L4_VALID, + .dma_size = MTK_DMA_SIZE(2K), .dma_max_len = MTK_TX_DMA_BUF_LEN, .dma_len_offset = 16, }, @@ -5127,11 +5146,14 @@ static const struct mtk_soc_data mt7623_data = { .desc_size = sizeof(struct mtk_tx_dma), .dma_max_len = MTK_TX_DMA_BUF_LEN, .dma_len_offset = 16, + .dma_size = MTK_DMA_SIZE(2K), + .fq_dma_size = MTK_DMA_SIZE(2K), }, .rx = { .desc_size = sizeof(struct mtk_rx_dma), .irq_done_mask = MTK_RX_DONE_INT, .dma_l4_valid = RX_DMA_L4_VALID, + .dma_size = MTK_DMA_SIZE(2K), .dma_max_len = MTK_TX_DMA_BUF_LEN, .dma_len_offset = 16, }, @@ -5150,11 +5172,14 @@ static const struct mtk_soc_data mt7629_data = { .desc_size = sizeof(struct mtk_tx_dma), .dma_max_len = MTK_TX_DMA_BUF_LEN, .dma_len_offset = 16, + .dma_size = MTK_DMA_SIZE(2K), + .fq_dma_size = MTK_DMA_SIZE(2K), }, .rx = { .desc_size = sizeof(struct mtk_rx_dma), .irq_done_mask = MTK_RX_DONE_INT, .dma_l4_valid = RX_DMA_L4_VALID, + .dma_size = MTK_DMA_SIZE(2K), .dma_max_len = MTK_TX_DMA_BUF_LEN, .dma_len_offset = 16, }, @@ -5176,6 +5201,8 @@ static const struct mtk_soc_data mt7981_data = { .desc_size = sizeof(struct mtk_tx_dma_v2), .dma_max_len = MTK_TX_DMA_BUF_LEN_V2, .dma_len_offset = 8, + .dma_size = MTK_DMA_SIZE(2K), + .fq_dma_size = MTK_DMA_SIZE(2K), }, .rx = { .desc_size = sizeof(struct mtk_rx_dma), @@ -5183,6 +5210,7 @@ static const struct mtk_soc_data mt7981_data = { .dma_l4_valid = RX_DMA_L4_VALID_V2, .dma_max_len = MTK_TX_DMA_BUF_LEN, .dma_len_offset = 16, + .dma_size = MTK_DMA_SIZE(2K), }, }; @@ -5202,6 +5230,8 @@ static const struct mtk_soc_data mt7986_data = { .desc_size = sizeof(struct mtk_tx_dma_v2), .dma_max_len = MTK_TX_DMA_BUF_LEN_V2, .dma_len_offset = 8, + .dma_size = MTK_DMA_SIZE(2K), + .fq_dma_size = MTK_DMA_SIZE(2K), }, .rx = { .desc_size = sizeof(struct mtk_rx_dma), @@ -5209,6 +5239,7 @@ static const struct mtk_soc_data mt7986_data = { .dma_l4_valid = RX_DMA_L4_VALID_V2, .dma_max_len = MTK_TX_DMA_BUF_LEN, .dma_len_offset = 16, + .dma_size = MTK_DMA_SIZE(2K), }, }; @@ -5228,6 +5259,8 @@ static const struct mtk_soc_data mt7988_data = { .desc_size = sizeof(struct mtk_tx_dma_v2), .dma_max_len = MTK_TX_DMA_BUF_LEN_V2, .dma_len_offset = 8, + .dma_size = MTK_DMA_SIZE(2K), + .fq_dma_size = MTK_DMA_SIZE(4K), }, .rx = { .desc_size = sizeof(struct mtk_rx_dma_v2), @@ -5235,6 +5268,7 @@ static const struct mtk_soc_data mt7988_data = { .dma_l4_valid = RX_DMA_L4_VALID_V2, .dma_max_len = MTK_TX_DMA_BUF_LEN_V2, .dma_len_offset = 8, + .dma_size = MTK_DMA_SIZE(2K), }, }; @@ -5249,6 +5283,7 @@ static const struct mtk_soc_data rt5350_data = { .desc_size = sizeof(struct mtk_tx_dma), .dma_max_len = MTK_TX_DMA_BUF_LEN, .dma_len_offset = 16, + .dma_size = MTK_DMA_SIZE(2K), }, .rx = { .desc_size = sizeof(struct mtk_rx_dma), @@ -5256,6 +5291,7 @@ static const struct mtk_soc_data rt5350_data = { .dma_l4_valid = RX_DMA_L4_VALID_PDMA, .dma_max_len = MTK_TX_DMA_BUF_LEN, .dma_len_offset = 16, + .dma_size = MTK_DMA_SIZE(2K), }, }; diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h index 4eab30b44070..f5174f6cb1bb 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h @@ -32,7 +32,9 @@ #define MTK_TX_DMA_BUF_LEN 0x3fff #define MTK_TX_DMA_BUF_LEN_V2 0xffff #define MTK_QDMA_RING_SIZE 2048 -#define MTK_DMA_SIZE 512 +#define MTK_DMA_SIZE(x) (SZ_##x) +#define MTK_FQ_DMA_HEAD 32 +#define MTK_FQ_DMA_LENGTH 2048 #define MTK_RX_ETH_HLEN (ETH_HLEN + ETH_FCS_LEN) #define MTK_RX_HLEN (NET_SKB_PAD + MTK_RX_ETH_HLEN + NET_IP_ALIGN) #define MTK_DMA_DUMMY_DESC 0xffffffff @@ -1176,6 +1178,8 @@ struct mtk_soc_data { u32 desc_size; u32 dma_max_len; u32 dma_len_offset; + u32 dma_size; + u32 fq_dma_size; } tx; struct { u32 desc_size; @@ -1183,6 +1187,7 @@ struct mtk_soc_data { u32 dma_l4_valid; u32 dma_max_len; u32 dma_len_offset; + u32 dma_size; } rx; }; @@ -1264,7 +1269,7 @@ struct mtk_eth { struct napi_struct rx_napi; void *scratch_ring; dma_addr_t phy_scratch_ring; - void *scratch_head; + void *scratch_head[MTK_FQ_DMA_HEAD]; struct clk *clks[MTK_CLK_MAX]; struct mii_bus *mii_bus; -- cgit v1.2.3 From 33afbfcc105a572159750f2ebee834a8a70fdd96 Mon Sep 17 00:00:00 2001 From: Moshe Shemesh Date: Tue, 4 Jun 2024 00:04:42 +0300 Subject: net/mlx5: Stop waiting for PCI if pci channel is offline In case pci channel becomes offline the driver should not wait for PCI reads during health dump and recovery flow. The driver has timeout for each of these loops trying to read PCI, so it would fail anyway. However, in case of recovery waiting till timeout may cause the pci error_detected() callback fail to meet pci_dpc_recovered() wait timeout. Fixes: b3bd076f7501 ("net/mlx5: Report devlink health on FW fatal issues") Signed-off-by: Moshe Shemesh Reviewed-by: Shay Drori Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/fw.c | 4 ++++ drivers/net/ethernet/mellanox/mlx5/core/health.c | 8 ++++++++ drivers/net/ethernet/mellanox/mlx5/core/lib/pci_vsc.c | 4 ++++ 3 files changed, 16 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fw.c b/drivers/net/ethernet/mellanox/mlx5/core/fw.c index 2d95a9b7b44e..b61b7d966114 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fw.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fw.c @@ -373,6 +373,10 @@ int mlx5_cmd_fast_teardown_hca(struct mlx5_core_dev *dev) do { if (mlx5_get_nic_state(dev) == MLX5_INITIAL_SEG_NIC_INTERFACE_DISABLED) break; + if (pci_channel_offline(dev->pdev)) { + mlx5_core_err(dev, "PCI channel offline, stop waiting for NIC IFC\n"); + return -EACCES; + } cond_resched(); } while (!time_after(jiffies, end)); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/health.c b/drivers/net/ethernet/mellanox/mlx5/core/health.c index ad38e31822df..a6329ca2d9bf 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/health.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/health.c @@ -248,6 +248,10 @@ recover_from_sw_reset: do { if (mlx5_get_nic_state(dev) == MLX5_INITIAL_SEG_NIC_INTERFACE_DISABLED) break; + if (pci_channel_offline(dev->pdev)) { + mlx5_core_err(dev, "PCI channel offline, stop waiting for NIC IFC\n"); + goto unlock; + } msleep(20); } while (!time_after(jiffies, end)); @@ -317,6 +321,10 @@ int mlx5_health_wait_pci_up(struct mlx5_core_dev *dev) mlx5_core_warn(dev, "device is being removed, stop waiting for PCI\n"); return -ENODEV; } + if (pci_channel_offline(dev->pdev)) { + mlx5_core_err(dev, "PCI channel offline, stop waiting for PCI\n"); + return -EACCES; + } msleep(100); } return 0; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/pci_vsc.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/pci_vsc.c index 6b774e0c2766..d0b595ba6110 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lib/pci_vsc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/pci_vsc.c @@ -74,6 +74,10 @@ int mlx5_vsc_gw_lock(struct mlx5_core_dev *dev) ret = -EBUSY; goto pci_unlock; } + if (pci_channel_offline(dev->pdev)) { + ret = -EACCES; + goto pci_unlock; + } /* Check if semaphore is already locked */ ret = vsc_read(dev, VSC_SEMAPHORE_OFFSET, &lock_val); -- cgit v1.2.3 From c8b3f38d2dae0397944814d691a419c451f9906f Mon Sep 17 00:00:00 2001 From: Shay Drory Date: Tue, 4 Jun 2024 00:04:43 +0300 Subject: net/mlx5: Always stop health timer during driver removal Currently, if teardown_hca fails to execute during driver removal, mlx5 does not stop the health timer. Afterwards, mlx5 continue with driver teardown. This may lead to a UAF bug, which results in page fault Oops[1], since the health timer invokes after resources were freed. Hence, stop the health monitor even if teardown_hca fails. [1] mlx5_core 0000:18:00.0: E-Switch: Unload vfs: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: cleanup mlx5_core 0000:18:00.0: wait_func:1155:(pid 1967079): TEARDOWN_HCA(0x103) timeout. Will cause a leak of a command resource mlx5_core 0000:18:00.0: mlx5_function_close:1288:(pid 1967079): tear_down_hca failed, skip cleanup BUG: unable to handle page fault for address: ffffa26487064230 PGD 100c00067 P4D 100c00067 PUD 100e5a067 PMD 105ed7067 PTE 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Tainted: G OE ------- --- 6.7.0-68.fc38.x86_64 #1 Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0013.121520200651 12/15/2020 RIP: 0010:ioread32be+0x34/0x60 RSP: 0018:ffffa26480003e58 EFLAGS: 00010292 RAX: ffffa26487064200 RBX: ffff9042d08161a0 RCX: ffff904c108222c0 RDX: 000000010bbf1b80 RSI: ffffffffc055ddb0 RDI: ffffa26487064230 RBP: ffff9042d08161a0 R08: 0000000000000022 R09: ffff904c108222e8 R10: 0000000000000004 R11: 0000000000000441 R12: ffffffffc055ddb0 R13: ffffa26487064200 R14: ffffa26480003f00 R15: ffff904c108222c0 FS: 0000000000000000(0000) GS:ffff904c10800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa26487064230 CR3: 00000002c4420006 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x175/0x180 ? asm_exc_page_fault+0x26/0x30 ? __pfx_poll_health+0x10/0x10 [mlx5_core] ? __pfx_poll_health+0x10/0x10 [mlx5_core] ? ioread32be+0x34/0x60 mlx5_health_check_fatal_sensors+0x20/0x100 [mlx5_core] ? __pfx_poll_health+0x10/0x10 [mlx5_core] poll_health+0x42/0x230 [mlx5_core] ? __next_timer_interrupt+0xbc/0x110 ? __pfx_poll_health+0x10/0x10 [mlx5_core] call_timer_fn+0x21/0x130 ? __pfx_poll_health+0x10/0x10 [mlx5_core] __run_timers+0x222/0x2c0 run_timer_softirq+0x1d/0x40 __do_softirq+0xc9/0x2c8 __irq_exit_rcu+0xa6/0xc0 sysvec_apic_timer_interrupt+0x72/0x90 asm_sysvec_apic_timer_interrupt+0x1a/0x20 RIP: 0010:cpuidle_enter_state+0xcc/0x440 ? cpuidle_enter_state+0xbd/0x440 cpuidle_enter+0x2d/0x40 do_idle+0x20d/0x270 cpu_startup_entry+0x2a/0x30 rest_init+0xd0/0xd0 arch_call_rest_init+0xe/0x30 start_kernel+0x709/0xa90 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0x96/0xa0 secondary_startup_64_no_verify+0x18f/0x19b ---[ end trace 0000000000000000 ]--- Fixes: 9b98d395b85d ("net/mlx5: Start health poll at earlier stage of driver load") Signed-off-by: Shay Drory Reviewed-by: Moshe Shemesh Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/main.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index 6574c145dc1e..459a836a5d9c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -1298,6 +1298,9 @@ static int mlx5_function_teardown(struct mlx5_core_dev *dev, bool boot) if (!err) mlx5_function_disable(dev, boot); + else + mlx5_stop_health_poll(dev, boot); + return err; } -- cgit v1.2.3 From 267cace556e8a53d703119f7435ab556209e5b6a Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Sun, 26 May 2024 07:59:08 -0500 Subject: drm/amd: Fix shutdown (again) on some SMU v13.0.4/11 platforms commit cd94d1b182d2 ("dm/amd/pm: Fix problems with reboot/shutdown for some SMU 13.0.4/13.0.11 users") attempted to fix shutdown issues that were reported since commit 31729e8c21ec ("drm/amd/pm: fixes a random hang in S4 for SMU v13.0.4/11") but caused issues for some people. Adjust the workaround flow to properly only apply in the S4 case: -> For shutdown go through SMU_MSG_PrepareMp1ForUnload -> For S4 go through SMU_MSG_GfxDeviceDriverReset and SMU_MSG_PrepareMp1ForUnload Reported-and-tested-by: lectrode Closes: https://github.com/void-linux/void-packages/issues/50417 Cc: stable@vger.kernel.org Fixes: cd94d1b182d2 ("dm/amd/pm: Fix problems with reboot/shutdown for some SMU 13.0.4/13.0.11 users") Reviewed-by: Tim Huang Signed-off-by: Mario Limonciello Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c index bc241b593db1..b6257f34a7c6 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c @@ -226,15 +226,17 @@ static int smu_v13_0_4_system_features_control(struct smu_context *smu, bool en) struct amdgpu_device *adev = smu->adev; int ret = 0; - if (!en && adev->in_s4) { - /* Adds a GFX reset as workaround just before sending the - * MP1_UNLOAD message to prevent GC/RLC/PMFW from entering - * an invalid state. - */ - ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_GfxDeviceDriverReset, - SMU_RESET_MODE_2, NULL); - if (ret) - return ret; + if (!en && !adev->in_s0ix) { + if (adev->in_s4) { + /* Adds a GFX reset as workaround just before sending the + * MP1_UNLOAD message to prevent GC/RLC/PMFW from entering + * an invalid state. + */ + ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_GfxDeviceDriverReset, + SMU_RESET_MODE_2, NULL); + if (ret) + return ret; + } ret = smu_cmn_send_smc_msg(smu, SMU_MSG_PrepareMp1ForUnload, NULL); } -- cgit v1.2.3 From c6c4dd54012551cce5cde408b35468f2c62b0cce Mon Sep 17 00:00:00 2001 From: Tasos Sahanidis Date: Fri, 31 May 2024 19:23:30 +0300 Subject: drm/amdgpu/pptable: Fix UBSAN array-index-out-of-bounds Flexible arrays used [1] instead of []. Replace the former with the latter to resolve multiple UBSAN warnings observed on boot with a BONAIRE card. In addition, use the __counted_by attribute where possible to hint the length of the arrays to the compiler and any sanitizers. Signed-off-by: Tasos Sahanidis Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/include/pptable.h | 91 +++++++++++++++++++---------------- 1 file changed, 49 insertions(+), 42 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/include/pptable.h b/drivers/gpu/drm/amd/include/pptable.h index 2e8e6c9875f6..f83ace2d7ec3 100644 --- a/drivers/gpu/drm/amd/include/pptable.h +++ b/drivers/gpu/drm/amd/include/pptable.h @@ -477,31 +477,30 @@ typedef struct _ATOM_PPLIB_STATE_V2 } ATOM_PPLIB_STATE_V2; typedef struct _StateArray{ - //how many states we have - UCHAR ucNumEntries; - - ATOM_PPLIB_STATE_V2 states[1]; + //how many states we have + UCHAR ucNumEntries; + + ATOM_PPLIB_STATE_V2 states[] /* __counted_by(ucNumEntries) */; }StateArray; typedef struct _ClockInfoArray{ - //how many clock levels we have - UCHAR ucNumEntries; - - //sizeof(ATOM_PPLIB_CLOCK_INFO) - UCHAR ucEntrySize; - - UCHAR clockInfo[]; + //how many clock levels we have + UCHAR ucNumEntries; + + //sizeof(ATOM_PPLIB_CLOCK_INFO) + UCHAR ucEntrySize; + + UCHAR clockInfo[]; }ClockInfoArray; typedef struct _NonClockInfoArray{ + //how many non-clock levels we have. normally should be same as number of states + UCHAR ucNumEntries; + //sizeof(ATOM_PPLIB_NONCLOCK_INFO) + UCHAR ucEntrySize; - //how many non-clock levels we have. normally should be same as number of states - UCHAR ucNumEntries; - //sizeof(ATOM_PPLIB_NONCLOCK_INFO) - UCHAR ucEntrySize; - - ATOM_PPLIB_NONCLOCK_INFO nonClockInfo[]; + ATOM_PPLIB_NONCLOCK_INFO nonClockInfo[] __counted_by(ucNumEntries); }NonClockInfoArray; typedef struct _ATOM_PPLIB_Clock_Voltage_Dependency_Record @@ -513,8 +512,10 @@ typedef struct _ATOM_PPLIB_Clock_Voltage_Dependency_Record typedef struct _ATOM_PPLIB_Clock_Voltage_Dependency_Table { - UCHAR ucNumEntries; // Number of entries. - ATOM_PPLIB_Clock_Voltage_Dependency_Record entries[1]; // Dynamically allocate entries. + // Number of entries. + UCHAR ucNumEntries; + // Dynamically allocate entries. + ATOM_PPLIB_Clock_Voltage_Dependency_Record entries[] __counted_by(ucNumEntries); }ATOM_PPLIB_Clock_Voltage_Dependency_Table; typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Record @@ -529,8 +530,10 @@ typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Record typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Table { - UCHAR ucNumEntries; // Number of entries. - ATOM_PPLIB_Clock_Voltage_Limit_Record entries[1]; // Dynamically allocate entries. + // Number of entries. + UCHAR ucNumEntries; + // Dynamically allocate entries. + ATOM_PPLIB_Clock_Voltage_Limit_Record entries[] __counted_by(ucNumEntries); }ATOM_PPLIB_Clock_Voltage_Limit_Table; union _ATOM_PPLIB_CAC_Leakage_Record @@ -553,8 +556,10 @@ typedef union _ATOM_PPLIB_CAC_Leakage_Record ATOM_PPLIB_CAC_Leakage_Record; typedef struct _ATOM_PPLIB_CAC_Leakage_Table { - UCHAR ucNumEntries; // Number of entries. - ATOM_PPLIB_CAC_Leakage_Record entries[1]; // Dynamically allocate entries. + // Number of entries. + UCHAR ucNumEntries; + // Dynamically allocate entries. + ATOM_PPLIB_CAC_Leakage_Record entries[] __counted_by(ucNumEntries); }ATOM_PPLIB_CAC_Leakage_Table; typedef struct _ATOM_PPLIB_PhaseSheddingLimits_Record @@ -568,8 +573,10 @@ typedef struct _ATOM_PPLIB_PhaseSheddingLimits_Record typedef struct _ATOM_PPLIB_PhaseSheddingLimits_Table { - UCHAR ucNumEntries; // Number of entries. - ATOM_PPLIB_PhaseSheddingLimits_Record entries[1]; // Dynamically allocate entries. + // Number of entries. + UCHAR ucNumEntries; + // Dynamically allocate entries. + ATOM_PPLIB_PhaseSheddingLimits_Record entries[] __counted_by(ucNumEntries); }ATOM_PPLIB_PhaseSheddingLimits_Table; typedef struct _VCEClockInfo{ @@ -580,8 +587,8 @@ typedef struct _VCEClockInfo{ }VCEClockInfo; typedef struct _VCEClockInfoArray{ - UCHAR ucNumEntries; - VCEClockInfo entries[1]; + UCHAR ucNumEntries; + VCEClockInfo entries[] __counted_by(ucNumEntries); }VCEClockInfoArray; typedef struct _ATOM_PPLIB_VCE_Clock_Voltage_Limit_Record @@ -592,8 +599,8 @@ typedef struct _ATOM_PPLIB_VCE_Clock_Voltage_Limit_Record typedef struct _ATOM_PPLIB_VCE_Clock_Voltage_Limit_Table { - UCHAR numEntries; - ATOM_PPLIB_VCE_Clock_Voltage_Limit_Record entries[1]; + UCHAR numEntries; + ATOM_PPLIB_VCE_Clock_Voltage_Limit_Record entries[] __counted_by(numEntries); }ATOM_PPLIB_VCE_Clock_Voltage_Limit_Table; typedef struct _ATOM_PPLIB_VCE_State_Record @@ -604,8 +611,8 @@ typedef struct _ATOM_PPLIB_VCE_State_Record typedef struct _ATOM_PPLIB_VCE_State_Table { - UCHAR numEntries; - ATOM_PPLIB_VCE_State_Record entries[1]; + UCHAR numEntries; + ATOM_PPLIB_VCE_State_Record entries[] __counted_by(numEntries); }ATOM_PPLIB_VCE_State_Table; @@ -626,8 +633,8 @@ typedef struct _UVDClockInfo{ }UVDClockInfo; typedef struct _UVDClockInfoArray{ - UCHAR ucNumEntries; - UVDClockInfo entries[1]; + UCHAR ucNumEntries; + UVDClockInfo entries[] __counted_by(ucNumEntries); }UVDClockInfoArray; typedef struct _ATOM_PPLIB_UVD_Clock_Voltage_Limit_Record @@ -638,8 +645,8 @@ typedef struct _ATOM_PPLIB_UVD_Clock_Voltage_Limit_Record typedef struct _ATOM_PPLIB_UVD_Clock_Voltage_Limit_Table { - UCHAR numEntries; - ATOM_PPLIB_UVD_Clock_Voltage_Limit_Record entries[1]; + UCHAR numEntries; + ATOM_PPLIB_UVD_Clock_Voltage_Limit_Record entries[] __counted_by(numEntries); }ATOM_PPLIB_UVD_Clock_Voltage_Limit_Table; typedef struct _ATOM_PPLIB_UVD_Table @@ -657,8 +664,8 @@ typedef struct _ATOM_PPLIB_SAMClk_Voltage_Limit_Record }ATOM_PPLIB_SAMClk_Voltage_Limit_Record; typedef struct _ATOM_PPLIB_SAMClk_Voltage_Limit_Table{ - UCHAR numEntries; - ATOM_PPLIB_SAMClk_Voltage_Limit_Record entries[]; + UCHAR numEntries; + ATOM_PPLIB_SAMClk_Voltage_Limit_Record entries[] __counted_by(numEntries); }ATOM_PPLIB_SAMClk_Voltage_Limit_Table; typedef struct _ATOM_PPLIB_SAMU_Table @@ -675,8 +682,8 @@ typedef struct _ATOM_PPLIB_ACPClk_Voltage_Limit_Record }ATOM_PPLIB_ACPClk_Voltage_Limit_Record; typedef struct _ATOM_PPLIB_ACPClk_Voltage_Limit_Table{ - UCHAR numEntries; - ATOM_PPLIB_ACPClk_Voltage_Limit_Record entries[1]; + UCHAR numEntries; + ATOM_PPLIB_ACPClk_Voltage_Limit_Record entries[] __counted_by(numEntries); }ATOM_PPLIB_ACPClk_Voltage_Limit_Table; typedef struct _ATOM_PPLIB_ACP_Table @@ -743,9 +750,9 @@ typedef struct ATOM_PPLIB_VQ_Budgeting_Record{ } ATOM_PPLIB_VQ_Budgeting_Record; typedef struct ATOM_PPLIB_VQ_Budgeting_Table { - UCHAR revid; - UCHAR numEntries; - ATOM_PPLIB_VQ_Budgeting_Record entries[1]; + UCHAR revid; + UCHAR numEntries; + ATOM_PPLIB_VQ_Budgeting_Record entries[] __counted_by(numEntries); } ATOM_PPLIB_VQ_Budgeting_Table; #pragma pack() -- cgit v1.2.3 From c462ecd659b5fce731f1d592285832fd6ad54053 Mon Sep 17 00:00:00 2001 From: Andreas Hindborg Date: Mon, 3 Jun 2024 21:26:45 +0200 Subject: null_blk: fix validation of block size Block size should be between 512 and PAGE_SIZE and be a power of 2. The current check does not validate this, so update the check. Without this patch, null_blk would Oops due to a null pointer deref when loaded with bs=1536 [1]. Link: https://lore.kernel.org/all/87wmn8mocd.fsf@metaspace.dk/ Signed-off-by: Andreas Hindborg Reviewed-by: Ming Lei Link: https://lore.kernel.org/r/20240603192645.977968-1-nmi@metaspace.dk [axboe: remove unnecessary braces and != 0 check] Signed-off-by: Jens Axboe --- drivers/block/null_blk/main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/block/null_blk/main.c b/drivers/block/null_blk/main.c index 631dca2e4e84..75f189e42f88 100644 --- a/drivers/block/null_blk/main.c +++ b/drivers/block/null_blk/main.c @@ -1824,8 +1824,8 @@ static int null_validate_conf(struct nullb_device *dev) dev->queue_mode = NULL_Q_MQ; } - dev->blocksize = round_down(dev->blocksize, 512); - dev->blocksize = clamp_t(unsigned int, dev->blocksize, 512, 4096); + if (blk_validate_block_size(dev->blocksize)) + return -EINVAL; if (dev->use_per_node_hctx) { if (dev->submit_queues != nr_online_nodes) -- cgit v1.2.3 From 229bedbf62b13af5aba6525ad10b62ad38d9ccb5 Mon Sep 17 00:00:00 2001 From: Aleksandr Mishin Date: Tue, 4 Jun 2024 13:05:52 +0300 Subject: net/mlx5: Fix tainted pointer delete is case of flow rules creation fail In case of flow rule creation fail in mlx5_lag_create_port_sel_table(), instead of previously created rules, the tainted pointer is deleted deveral times. Fix this bug by using correct flow rules pointers. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 352899f384d4 ("net/mlx5: Lag, use buckets in hash mode") Signed-off-by: Aleksandr Mishin Reviewed-by: Jacob Keller Reviewed-by: Tariq Toukan Link: https://lore.kernel.org/r/20240604100552.25201-1-amishin@t-argos.ru Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/lag/port_sel.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag/port_sel.c b/drivers/net/ethernet/mellanox/mlx5/core/lag/port_sel.c index c16b462ddedf..ab2717012b79 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lag/port_sel.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/lag/port_sel.c @@ -88,9 +88,13 @@ static int mlx5_lag_create_port_sel_table(struct mlx5_lag *ldev, &dest, 1); if (IS_ERR(lag_definer->rules[idx])) { err = PTR_ERR(lag_definer->rules[idx]); - while (i--) - while (j--) + do { + while (j--) { + idx = i * ldev->buckets + j; mlx5_del_flow_rules(lag_definer->rules[idx]); + } + j = ldev->buckets; + } while (i--); goto destroy_fg; } } -- cgit v1.2.3 From 323a359f9b077f382f4483023d096a4d316fd135 Mon Sep 17 00:00:00 2001 From: Karol Kolacinski Date: Tue, 4 Jun 2024 14:05:27 +0200 Subject: ptp: Fix error message on failed pin verification On failed verification of PTP clock pin, error message prints channel number instead of pin index after "pin", which is incorrect. Fix error message by adding channel number to the message and printing pin number instead of channel number. Fixes: 6092315dfdec ("ptp: introduce programmable pins.") Signed-off-by: Karol Kolacinski Acked-by: Richard Cochran Link: https://lore.kernel.org/r/20240604120555.16643-1-karol.kolacinski@intel.com Signed-off-by: Jakub Kicinski --- drivers/ptp/ptp_chardev.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ptp/ptp_chardev.c b/drivers/ptp/ptp_chardev.c index 7513018c9f9a..2067b0120d08 100644 --- a/drivers/ptp/ptp_chardev.c +++ b/drivers/ptp/ptp_chardev.c @@ -85,7 +85,8 @@ int ptp_set_pinfunc(struct ptp_clock *ptp, unsigned int pin, } if (info->verify(info, pin, func, chan)) { - pr_err("driver cannot use function %u on pin %u\n", func, chan); + pr_err("driver cannot use function %u and channel %u on pin %u\n", + func, chan, pin); return -EOPNOTSUPP; } -- cgit v1.2.3 From 7926d51f73e0434a6250c2fd1a0555f98d9a62da Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Tue, 4 Jun 2024 22:25:21 -0400 Subject: scsi: sd: Use READ(16) when reading block zero on large capacity disks Commit 321da3dc1f3c ("scsi: sd: usb_storage: uas: Access media prior to querying device properties") triggered a read to LBA 0 before attempting to inquire about device characteristics. This was done because some protocol bridge devices will return generic values until an attached storage device's media has been accessed. Pierre Tomon reported that this change caused problems on a large capacity external drive connected via a bridge device. The bridge in question does not appear to implement the READ(10) command. Issue a READ(16) instead of READ(10) when a device has been identified as preferring 16-byte commands (use_16_for_rw heuristic). Link: https://bugzilla.kernel.org/show_bug.cgi?id=218890 Link: https://lore.kernel.org/r/70dd7ae0-b6b1-48e1-bb59-53b7c7f18274@rowland.harvard.edu Link: https://lore.kernel.org/r/20240605022521.3960956-1-martin.petersen@oracle.com Fixes: 321da3dc1f3c ("scsi: sd: usb_storage: uas: Access media prior to querying device properties") Cc: stable@vger.kernel.org Reported-by: Pierre Tomon Suggested-by: Alan Stern Tested-by: Pierre Tomon Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/sd.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 332eb9dac22d..fbc11046bbf6 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -3565,16 +3565,23 @@ static bool sd_validate_opt_xfer_size(struct scsi_disk *sdkp, static void sd_read_block_zero(struct scsi_disk *sdkp) { - unsigned int buf_len = sdkp->device->sector_size; - char *buffer, cmd[10] = { }; + struct scsi_device *sdev = sdkp->device; + unsigned int buf_len = sdev->sector_size; + u8 *buffer, cmd[16] = { }; buffer = kmalloc(buf_len, GFP_KERNEL); if (!buffer) return; - cmd[0] = READ_10; - put_unaligned_be32(0, &cmd[2]); /* Logical block address 0 */ - put_unaligned_be16(1, &cmd[7]); /* Transfer 1 logical block */ + if (sdev->use_16_for_rw) { + cmd[0] = READ_16; + put_unaligned_be64(0, &cmd[2]); /* Logical block address 0 */ + put_unaligned_be32(1, &cmd[10]);/* Transfer 1 logical block */ + } else { + cmd[0] = READ_10; + put_unaligned_be32(0, &cmd[2]); /* Logical block address 0 */ + put_unaligned_be16(1, &cmd[7]); /* Transfer 1 logical block */ + } scsi_execute_cmd(sdkp->device, cmd, REQ_OP_DRV_IN, buffer, buf_len, SD_TIMEOUT, sdkp->max_retries, NULL); -- cgit v1.2.3 From 4254dfeda82f20844299dca6c38cbffcfd499f41 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Wed, 5 Jun 2024 01:55:29 -0700 Subject: scsi: mpt3sas: Avoid test/set_bit() operating in non-allocated memory There is a potential out-of-bounds access when using test_bit() on a single word. The test_bit() and set_bit() functions operate on long values, and when testing or setting a single word, they can exceed the word boundary. KASAN detects this issue and produces a dump: BUG: KASAN: slab-out-of-bounds in _scsih_add_device.constprop.0 (./arch/x86/include/asm/bitops.h:60 ./include/asm-generic/bitops/instrumented-atomic.h:29 drivers/scsi/mpt3sas/mpt3sas_scsih.c:7331) mpt3sas Write of size 8 at addr ffff8881d26e3c60 by task kworker/u1536:2/2965 For full log, please look at [1]. Make the allocation at least the size of sizeof(unsigned long) so that set_bit() and test_bit() have sufficient room for read/write operations without overwriting unallocated memory. [1] Link: https://lore.kernel.org/all/ZkNcALr3W3KGYYJG@gmail.com/ Fixes: c696f7b83ede ("scsi: mpt3sas: Implement device_remove_in_progress check in IOCTL path") Cc: stable@vger.kernel.org Suggested-by: Keith Busch Signed-off-by: Breno Leitao Link: https://lore.kernel.org/r/20240605085530.499432-1-leitao@debian.org Reviewed-by: Keith Busch Signed-off-by: Martin K. Petersen --- drivers/scsi/mpt3sas/mpt3sas_base.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 258647fc6bdd..1092497563b2 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -8512,6 +8512,12 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) ioc->pd_handles_sz = (ioc->facts.MaxDevHandle / 8); if (ioc->facts.MaxDevHandle % 8) ioc->pd_handles_sz++; + /* + * pd_handles_sz should have, at least, the minimal room for + * set_bit()/test_bit(), otherwise out-of-memory touch may occur. + */ + ioc->pd_handles_sz = ALIGN(ioc->pd_handles_sz, sizeof(unsigned long)); + ioc->pd_handles = kzalloc(ioc->pd_handles_sz, GFP_KERNEL); if (!ioc->pd_handles) { @@ -8529,6 +8535,13 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) ioc->pend_os_device_add_sz = (ioc->facts.MaxDevHandle / 8); if (ioc->facts.MaxDevHandle % 8) ioc->pend_os_device_add_sz++; + + /* + * pend_os_device_add_sz should have, at least, the minimal room for + * set_bit()/test_bit(), otherwise out-of-memory may occur. + */ + ioc->pend_os_device_add_sz = ALIGN(ioc->pend_os_device_add_sz, + sizeof(unsigned long)); ioc->pend_os_device_add = kzalloc(ioc->pend_os_device_add_sz, GFP_KERNEL); if (!ioc->pend_os_device_add) { @@ -8820,6 +8833,12 @@ _base_check_ioc_facts_changes(struct MPT3SAS_ADAPTER *ioc) if (ioc->facts.MaxDevHandle % 8) pd_handles_sz++; + /* + * pd_handles should have, at least, the minimal room for + * set_bit()/test_bit(), otherwise out-of-memory touch may + * occur. + */ + pd_handles_sz = ALIGN(pd_handles_sz, sizeof(unsigned long)); pd_handles = krealloc(ioc->pd_handles, pd_handles_sz, GFP_KERNEL); if (!pd_handles) { -- cgit v1.2.3 From 426826933109093503e7ef15d49348fc5ab505fe Mon Sep 17 00:00:00 2001 From: Ian Forbes Date: Tue, 21 May 2024 13:47:17 -0500 Subject: drm/vmwgfx: Filter modes which exceed graphics memory SVGA requires individual surfaces to fit within graphics memory (max_mob_pages) which means that modes with a final buffer size that would exceed graphics memory must be pruned otherwise creation will fail. Additionally llvmpipe requires its buffer height and width to be a multiple of its tile size which is 64. As a result we have to anticipate that llvmpipe will round up the mode size passed to it by the compositor when it creates buffers and filter modes where this rounding exceeds graphics memory. This fixes an issue where VMs with low graphics memory (< 64MiB) configured with high resolution mode boot to a black screen because surface creation fails. Fixes: d947d1b71deb ("drm/vmwgfx: Add and connect connector helper function") Signed-off-by: Ian Forbes Signed-off-by: Zack Rusin Link: https://patchwork.freedesktop.org/patch/msgid/20240521184720.767-2-ian.forbes@broadcom.com --- drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c | 45 ++++++++++++++++++++++++++++++++++-- 1 file changed, 43 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c index 2041c4d48daa..52e8ec3b2357 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c @@ -43,7 +43,14 @@ #define vmw_connector_to_stdu(x) \ container_of(x, struct vmw_screen_target_display_unit, base.connector) - +/* + * Some renderers such as llvmpipe will align the width and height of their + * buffers to match their tile size. We need to keep this in mind when exposing + * modes to userspace so that this possible over-allocation will not exceed + * graphics memory. 64x64 pixels seems to be a reasonable upper bound for the + * tile size of current renderers. + */ +#define GPU_TILE_SIZE 64 enum stdu_content_type { SAME_AS_DISPLAY = 0, @@ -829,7 +836,41 @@ static void vmw_stdu_connector_destroy(struct drm_connector *connector) vmw_stdu_destroy(vmw_connector_to_stdu(connector)); } +static enum drm_mode_status +vmw_stdu_connector_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + enum drm_mode_status ret; + struct drm_device *dev = connector->dev; + struct vmw_private *dev_priv = vmw_priv(dev); + u64 assumed_cpp = dev_priv->assume_16bpp ? 2 : 4; + /* Align width and height to account for GPU tile over-alignment */ + u64 required_mem = ALIGN(mode->hdisplay, GPU_TILE_SIZE) * + ALIGN(mode->vdisplay, GPU_TILE_SIZE) * + assumed_cpp; + required_mem = ALIGN(required_mem, PAGE_SIZE); + + ret = drm_mode_validate_size(mode, dev_priv->stdu_max_width, + dev_priv->stdu_max_height); + if (ret != MODE_OK) + return ret; + ret = drm_mode_validate_size(mode, dev_priv->texture_max_width, + dev_priv->texture_max_height); + if (ret != MODE_OK) + return ret; + + if (required_mem > dev_priv->max_primary_mem) + return MODE_MEM; + + if (required_mem > dev_priv->max_mob_pages * PAGE_SIZE) + return MODE_MEM; + + if (required_mem > dev_priv->max_mob_size) + return MODE_MEM; + + return MODE_OK; +} static const struct drm_connector_funcs vmw_stdu_connector_funcs = { .dpms = vmw_du_connector_dpms, @@ -845,7 +886,7 @@ static const struct drm_connector_funcs vmw_stdu_connector_funcs = { static const struct drm_connector_helper_funcs vmw_stdu_connector_helper_funcs = { .get_modes = vmw_connector_get_modes, - .mode_valid = vmw_connector_mode_valid + .mode_valid = vmw_stdu_connector_mode_valid }; -- cgit v1.2.3 From fb5e19d2dd03eb995ccd468d599b2337f7f66555 Mon Sep 17 00:00:00 2001 From: Ian Forbes Date: Tue, 21 May 2024 13:47:18 -0500 Subject: drm/vmwgfx: 3D disabled should not effect STDU memory limits This limit became a hard cap starting with the change referenced below. Surface creation on the device will fail if the requested size is larger than this limit so altering the value arbitrarily will expose modes that are too large for the device's hard limits. Fixes: 7ebb47c9f9ab ("drm/vmwgfx: Read new register for GB memory when available") Signed-off-by: Ian Forbes Signed-off-by: Zack Rusin Link: https://patchwork.freedesktop.org/patch/msgid/20240521184720.767-3-ian.forbes@broadcom.com --- drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index 8f1730aeacc9..18a1f05c6fa8 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -960,13 +960,6 @@ static int vmw_driver_load(struct vmw_private *dev_priv, u32 pci_id) vmw_read(dev_priv, SVGA_REG_SUGGESTED_GBOBJECT_MEM_SIZE_KB); - /* - * Workaround for low memory 2D VMs to compensate for the - * allocation taken by fbdev - */ - if (!(dev_priv->capabilities & SVGA_CAP_3D)) - mem_size *= 3; - dev_priv->max_mob_pages = mem_size * 1024 / PAGE_SIZE; dev_priv->max_primary_mem = vmw_read(dev_priv, SVGA_REG_MAX_PRIMARY_MEM); -- cgit v1.2.3 From dde1de06bd7248fd83c4ce5cf0dbe9e4e95bbb91 Mon Sep 17 00:00:00 2001 From: Ian Forbes Date: Tue, 21 May 2024 13:47:19 -0500 Subject: drm/vmwgfx: Remove STDU logic from generic mode_valid function STDU has its own mode_valid function now so this logic can be removed from the generic version. Fixes: 935f795045a6 ("drm/vmwgfx: Refactor drm connector probing for display modes") Signed-off-by: Ian Forbes Signed-off-by: Zack Rusin Link: https://patchwork.freedesktop.org/patch/msgid/20240521184720.767-4-ian.forbes@broadcom.com --- drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 3 --- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 26 +++++++++----------------- 2 files changed, 9 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index 4ecaea0026fc..a1ce41e1c468 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -1043,9 +1043,6 @@ void vmw_kms_cursor_snoop(struct vmw_surface *srf, int vmw_kms_write_svga(struct vmw_private *vmw_priv, unsigned width, unsigned height, unsigned pitch, unsigned bpp, unsigned depth); -bool vmw_kms_validate_mode_vram(struct vmw_private *dev_priv, - uint32_t pitch, - uint32_t height); int vmw_kms_present(struct vmw_private *dev_priv, struct drm_file *file_priv, struct vmw_framebuffer *vfb, diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 13b2820cae51..9532258a0848 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -2171,13 +2171,12 @@ int vmw_kms_write_svga(struct vmw_private *vmw_priv, return 0; } +static bool vmw_kms_validate_mode_vram(struct vmw_private *dev_priv, - uint32_t pitch, - uint32_t height) + u64 pitch, + u64 height) { - return ((u64) pitch * (u64) height) < (u64) - ((dev_priv->active_display_unit == vmw_du_screen_target) ? - dev_priv->max_primary_mem : dev_priv->vram_size); + return (pitch * height) < (u64)dev_priv->vram_size; } /** @@ -2873,25 +2872,18 @@ out_unref: enum drm_mode_status vmw_connector_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { + enum drm_mode_status ret; struct drm_device *dev = connector->dev; struct vmw_private *dev_priv = vmw_priv(dev); - u32 max_width = dev_priv->texture_max_width; - u32 max_height = dev_priv->texture_max_height; u32 assumed_cpp = 4; if (dev_priv->assume_16bpp) assumed_cpp = 2; - if (dev_priv->active_display_unit == vmw_du_screen_target) { - max_width = min(dev_priv->stdu_max_width, max_width); - max_height = min(dev_priv->stdu_max_height, max_height); - } - - if (max_width < mode->hdisplay) - return MODE_BAD_HVALUE; - - if (max_height < mode->vdisplay) - return MODE_BAD_VVALUE; + ret = drm_mode_validate_size(mode, dev_priv->texture_max_width, + dev_priv->texture_max_height); + if (ret != MODE_OK) + return ret; if (!vmw_kms_validate_mode_vram(dev_priv, mode->hdisplay * assumed_cpp, -- cgit v1.2.3 From a54a200f3dc710db0572aba45c5c06b12b74489a Mon Sep 17 00:00:00 2001 From: Ian Forbes Date: Tue, 21 May 2024 13:47:20 -0500 Subject: drm/vmwgfx: Standardize use of kibibytes when logging Use the same standard abbreviation KiB instead of incorrect variants. Signed-off-by: Ian Forbes Signed-off-by: Zack Rusin Link: https://patchwork.freedesktop.org/patch/msgid/20240521184720.767-5-ian.forbes@broadcom.com --- drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 12 ++++++------ drivers/gpu/drm/vmwgfx/vmwgfx_gmrid_manager.c | 4 ++-- 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index 18a1f05c6fa8..823d8d2da17c 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -746,7 +746,7 @@ static int vmw_setup_pci_resources(struct vmw_private *dev, dev->vram_size = pci_resource_len(pdev, 2); drm_info(&dev->drm, - "Register MMIO at 0x%pa size is %llu kiB\n", + "Register MMIO at 0x%pa size is %llu KiB\n", &rmmio_start, (uint64_t)rmmio_size / 1024); dev->rmmio = devm_ioremap(dev->drm.dev, rmmio_start, @@ -765,7 +765,7 @@ static int vmw_setup_pci_resources(struct vmw_private *dev, fifo_size = pci_resource_len(pdev, 2); drm_info(&dev->drm, - "FIFO at %pa size is %llu kiB\n", + "FIFO at %pa size is %llu KiB\n", &fifo_start, (uint64_t)fifo_size / 1024); dev->fifo_mem = devm_memremap(dev->drm.dev, fifo_start, @@ -790,7 +790,7 @@ static int vmw_setup_pci_resources(struct vmw_private *dev, * SVGA_REG_VRAM_SIZE. */ drm_info(&dev->drm, - "VRAM at %pa size is %llu kiB\n", + "VRAM at %pa size is %llu KiB\n", &dev->vram_start, (uint64_t)dev->vram_size / 1024); return 0; @@ -984,13 +984,13 @@ static int vmw_driver_load(struct vmw_private *dev_priv, u32 pci_id) dev_priv->max_primary_mem = dev_priv->vram_size; } drm_info(&dev_priv->drm, - "Legacy memory limits: VRAM = %llu kB, FIFO = %llu kB, surface = %u kB\n", + "Legacy memory limits: VRAM = %llu KiB, FIFO = %llu KiB, surface = %u KiB\n", (u64)dev_priv->vram_size / 1024, (u64)dev_priv->fifo_mem_size / 1024, dev_priv->memory_size / 1024); drm_info(&dev_priv->drm, - "MOB limits: max mob size = %u kB, max mob pages = %u\n", + "MOB limits: max mob size = %u KiB, max mob pages = %u\n", dev_priv->max_mob_size / 1024, dev_priv->max_mob_pages); ret = vmw_dma_masks(dev_priv); @@ -1008,7 +1008,7 @@ static int vmw_driver_load(struct vmw_private *dev_priv, u32 pci_id) (unsigned)dev_priv->max_gmr_pages); } drm_info(&dev_priv->drm, - "Maximum display memory size is %llu kiB\n", + "Maximum display memory size is %llu KiB\n", (uint64_t)dev_priv->max_primary_mem / 1024); /* Need mmio memory to check for fifo pitchlock cap. */ diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_gmrid_manager.c b/drivers/gpu/drm/vmwgfx/vmwgfx_gmrid_manager.c index a0b47c9b33f5..5bd967fbcf55 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_gmrid_manager.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_gmrid_manager.c @@ -94,14 +94,14 @@ static int vmw_gmrid_man_get_node(struct ttm_resource_manager *man, } else new_max_pages = gman->max_gmr_pages * 2; if (new_max_pages > gman->max_gmr_pages && new_max_pages >= gman->used_gmr_pages) { - DRM_WARN("vmwgfx: increasing guest mob limits to %u kB.\n", + DRM_WARN("vmwgfx: increasing guest mob limits to %u KiB.\n", ((new_max_pages) << (PAGE_SHIFT - 10))); gman->max_gmr_pages = new_max_pages; } else { char buf[256]; snprintf(buf, sizeof(buf), - "vmwgfx, error: guest graphics is out of memory (mob limit at: %ukB).\n", + "vmwgfx, error: guest graphics is out of memory (mob limit at: %u KiB).\n", ((gman->max_gmr_pages) << (PAGE_SHIFT - 10))); vmw_host_printf(buf); DRM_WARN("%s", buf); -- cgit v1.2.3 From 7ef91dcba172441582962602ff6899bfec6078b7 Mon Sep 17 00:00:00 2001 From: Ian Forbes Date: Fri, 31 May 2024 15:33:58 -0500 Subject: drm/vmwgfx: Don't destroy Screen Target when CRTC is enabled but inactive drm_crtc_helper_funcs::atomic_disable can be called even when the CRTC is still enabled. This can occur when the mode changes or the CRTC is set as inactive. In the case where the CRTC is being set as inactive we only want to blank the screen. The Screen Target should remain intact as long as the mode has not changed and CRTC is enabled. This fixes a bug with GDM where locking the screen results in a permanent black screen because the Screen Target is no longer defined. Fixes: 7b0062036c3b ("drm/vmwgfx: Implement virtual crc generation") Signed-off-by: Ian Forbes Reviewed-by: Martin Krastev Signed-off-by: Zack Rusin Link: https://patchwork.freedesktop.org/patch/msgid/20240531203358.26677-1-ian.forbes@broadcom.com --- drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c index 52e8ec3b2357..afc0bc4ef4e1 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c @@ -421,6 +421,7 @@ static void vmw_stdu_crtc_atomic_disable(struct drm_crtc *crtc, { struct vmw_private *dev_priv; struct vmw_screen_target_display_unit *stdu; + struct drm_crtc_state *new_crtc_state; int ret; if (!crtc) { @@ -430,6 +431,7 @@ static void vmw_stdu_crtc_atomic_disable(struct drm_crtc *crtc, stdu = vmw_crtc_to_stdu(crtc); dev_priv = vmw_priv(crtc->dev); + new_crtc_state = drm_atomic_get_new_crtc_state(state, crtc); if (dev_priv->vkms_enabled) drm_crtc_vblank_off(crtc); @@ -441,6 +443,14 @@ static void vmw_stdu_crtc_atomic_disable(struct drm_crtc *crtc, (void) vmw_stdu_update_st(dev_priv, stdu); + /* Don't destroy the Screen Target if we are only setting the + * display as inactive + */ + if (new_crtc_state->enable && + !new_crtc_state->active && + !new_crtc_state->mode_changed) + return; + ret = vmw_stdu_destroy_st(dev_priv, stdu); if (ret) DRM_ERROR("Failed to destroy Screen Target\n"); -- cgit v1.2.3 From b91e05f1fcf755c9d2c4ca10907383e39def05bd Mon Sep 17 00:00:00 2001 From: "Dr. David Alan Gilbert" Date: Sat, 18 May 2024 00:28:58 +0100 Subject: drm/vmwgfx: remove unused struct 'vmw_stdu_dma' 'vmw_stdu_dma' is unused since commit 39985eea5a6d ("drm/vmwgfx: Abstract placement selection") Remove it. Signed-off-by: Dr. David Alan Gilbert Signed-off-by: Zack Rusin Link: https://patchwork.freedesktop.org/patch/msgid/20240517232858.230860-1-linux@treblig.org --- drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c index afc0bc4ef4e1..a04e0736318d 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c @@ -92,11 +92,6 @@ struct vmw_stdu_update { SVGA3dCmdUpdateGBScreenTarget body; }; -struct vmw_stdu_dma { - SVGA3dCmdHeader header; - SVGA3dCmdSurfaceDMA body; -}; - struct vmw_stdu_surface_copy { SVGA3dCmdHeader header; SVGA3dCmdSurfaceCopy body; -- cgit v1.2.3 From 03e4a092be8ce3de7c1baa7ae14e68b64e3ea644 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Mon, 3 Jun 2024 14:42:30 -0700 Subject: ice: fix iteration of TLVs in Preserved Fields Area The ice_get_pfa_module_tlv() function iterates over the Type-Length-Value structures in the Preserved Fields Area (PFA) of the NVM. This is used by the driver to access data such as the Part Board Assembly identifier. The function uses simple logic to iterate over the PFA. First, the pointer to the PFA in the NVM is read. Then the total length of the PFA is read from the first word. A pointer to the first TLV is initialized, and a simple loop iterates over each TLV. The pointer is moved forward through the NVM until it exceeds the PFA area. The logic seems sound, but it is missing a key detail. The Preserved Fields Area length includes one additional final word. This is documented in the device data sheet as a dummy word which contains 0xFFFF. All NVMs have this extra word. If the driver tries to scan for a TLV that is not in the PFA, it will read past the size of the PFA. It reads and interprets the last dummy word of the PFA as a TLV with type 0xFFFF. It then reads the word following the PFA as a length. The PFA resides within the Shadow RAM portion of the NVM, which is relatively small. All of its offsets are within a 16-bit size. The PFA pointer and TLV pointer are stored by the driver as 16-bit values. In almost all cases, the word following the PFA will be such that interpreting it as a length will result in 16-bit arithmetic overflow. Once overflowed, the new next_tlv value is now below the maximum offset of the PFA. Thus, the driver will continue to iterate the data as TLVs. In the worst case, the driver hits on a sequence of reads which loop back to reading the same offsets in an endless loop. To fix this, we need to correct the loop iteration check to account for this extra word at the end of the PFA. This alone is sufficient to resolve the known cases of this issue in the field. However, it is plausible that an NVM could be misconfigured or have corrupt data which results in the same kind of overflow. Protect against this by using check_add_overflow when calculating both the maximum offset of the TLVs, and when calculating the next_tlv offset at the end of each loop iteration. This ensures that the driver will not get stuck in an infinite loop when scanning the PFA. Fixes: e961b679fb0b ("ice: add board identifier info to devlink .info_get") Co-developed-by: Paul Greenwalt Signed-off-by: Paul Greenwalt Reviewed-by: Przemek Kitszel Tested-by: Pucha Himasekhar Reddy Signed-off-by: Jacob Keller Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-1-e3563aa89b0c@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/ice/ice_nvm.c | 28 +++++++++++++++++++++------- 1 file changed, 21 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_nvm.c b/drivers/net/ethernet/intel/ice/ice_nvm.c index 84eab92dc03c..ea7cbdf8492d 100644 --- a/drivers/net/ethernet/intel/ice/ice_nvm.c +++ b/drivers/net/ethernet/intel/ice/ice_nvm.c @@ -440,8 +440,7 @@ int ice_get_pfa_module_tlv(struct ice_hw *hw, u16 *module_tlv, u16 *module_tlv_len, u16 module_type) { - u16 pfa_len, pfa_ptr; - u16 next_tlv; + u16 pfa_len, pfa_ptr, next_tlv, max_tlv; int status; status = ice_read_sr_word(hw, ICE_SR_PFA_PTR, &pfa_ptr); @@ -454,11 +453,23 @@ ice_get_pfa_module_tlv(struct ice_hw *hw, u16 *module_tlv, u16 *module_tlv_len, ice_debug(hw, ICE_DBG_INIT, "Failed to read PFA length.\n"); return status; } + + /* The Preserved Fields Area contains a sequence of Type-Length-Value + * structures which define its contents. The PFA length includes all + * of the TLVs, plus the initial length word itself, *and* one final + * word at the end after all of the TLVs. + */ + if (check_add_overflow(pfa_ptr, pfa_len - 1, &max_tlv)) { + dev_warn(ice_hw_to_dev(hw), "PFA starts at offset %u. PFA length of %u caused 16-bit arithmetic overflow.\n", + pfa_ptr, pfa_len); + return -EINVAL; + } + /* Starting with first TLV after PFA length, iterate through the list * of TLVs to find the requested one. */ next_tlv = pfa_ptr + 1; - while (next_tlv < pfa_ptr + pfa_len) { + while (next_tlv < max_tlv) { u16 tlv_sub_module_type; u16 tlv_len; @@ -482,10 +493,13 @@ ice_get_pfa_module_tlv(struct ice_hw *hw, u16 *module_tlv, u16 *module_tlv_len, } return -EINVAL; } - /* Check next TLV, i.e. current TLV pointer + length + 2 words - * (for current TLV's type and length) - */ - next_tlv = next_tlv + tlv_len + 2; + + if (check_add_overflow(next_tlv, 2, &next_tlv) || + check_add_overflow(next_tlv, tlv_len, &next_tlv)) { + dev_warn(ice_hw_to_dev(hw), "TLV of type %u and length 0x%04x caused 16-bit arithmetic overflow. The PFA starts at 0x%04x and has length of 0x%04x\n", + tlv_sub_module_type, tlv_len, pfa_ptr, pfa_len); + return -EINVAL; + } } /* Module does not exist */ return -ENOENT; -- cgit v1.2.3 From cfa747a66e5da34793ac08c26b814e7709613fab Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Mon, 3 Jun 2024 14:42:31 -0700 Subject: ice: fix reads from NVM Shadow RAM on E830 and E825-C devices The ice driver reads data from the Shadow RAM portion of the NVM during initialization, including data used to identify the NVM image and device, such as the ETRACK ID used to populate devlink dev info fw.bundle. Currently it is using a fixed offset defined by ICE_CSS_HEADER_LENGTH to compute the appropriate offset. This worked fine for E810 and E822 devices which both have CSS header length of 330 words. Other devices, including both E825-C and E830 devices have different sizes for their CSS header. The use of a hard coded value results in the driver reading from the wrong block in the NVM when attempting to access the Shadow RAM copy. This results in the driver reporting the fw.bundle as 0x0 in both the devlink dev info and ethtool -i output. The first E830 support was introduced by commit ba20ecb1d1bb ("ice: Hook up 4 E830 devices by adding their IDs") and the first E825-C support was introducted by commit f64e18944233 ("ice: introduce new E825C devices family") The NVM actually contains the CSS header length embedded in it. Remove the hard coded value and replace it with logic to read the length from the NVM directly. This is more resilient against all existing and future hardware, vs looking up the expected values from a table. It ensures the driver will read from the appropriate place when determining the ETRACK ID value used for populating the fw.bundle_id and for reporting in ethtool -i. The CSS header length for both the active and inactive flash bank is stored in the ice_bank_info structure to avoid unnecessary duplicate work when accessing multiple words of the Shadow RAM. Both banks are read in the unlikely event that the header length is different for the NVM in the inactive bank, rather than being different only by the overall device family. Fixes: ba20ecb1d1bb ("ice: Hook up 4 E830 devices by adding their IDs") Co-developed-by: Paul Greenwalt Signed-off-by: Paul Greenwalt Reviewed-by: Przemek Kitszel Tested-by: Pucha Himasekhar Reddy Signed-off-by: Jacob Keller Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-2-e3563aa89b0c@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/ice/ice_nvm.c | 88 ++++++++++++++++++++++++++++++- drivers/net/ethernet/intel/ice/ice_type.h | 14 +++-- 2 files changed, 93 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_nvm.c b/drivers/net/ethernet/intel/ice/ice_nvm.c index ea7cbdf8492d..59e8879ac059 100644 --- a/drivers/net/ethernet/intel/ice/ice_nvm.c +++ b/drivers/net/ethernet/intel/ice/ice_nvm.c @@ -374,11 +374,25 @@ ice_read_nvm_module(struct ice_hw *hw, enum ice_bank_select bank, u32 offset, u1 * * Read the specified word from the copy of the Shadow RAM found in the * specified NVM module. + * + * Note that the Shadow RAM copy is always located after the CSS header, and + * is aligned to 64-byte (32-word) offsets. */ static int ice_read_nvm_sr_copy(struct ice_hw *hw, enum ice_bank_select bank, u32 offset, u16 *data) { - return ice_read_nvm_module(hw, bank, ICE_NVM_SR_COPY_WORD_OFFSET + offset, data); + u32 sr_copy; + + switch (bank) { + case ICE_ACTIVE_FLASH_BANK: + sr_copy = roundup(hw->flash.banks.active_css_hdr_len, 32); + break; + case ICE_INACTIVE_FLASH_BANK: + sr_copy = roundup(hw->flash.banks.inactive_css_hdr_len, 32); + break; + } + + return ice_read_nvm_module(hw, bank, sr_copy + offset, data); } /** @@ -1023,6 +1037,72 @@ static int ice_determine_active_flash_banks(struct ice_hw *hw) return 0; } +/** + * ice_get_nvm_css_hdr_len - Read the CSS header length from the NVM CSS header + * @hw: pointer to the HW struct + * @bank: whether to read from the active or inactive flash bank + * @hdr_len: storage for header length in words + * + * Read the CSS header length from the NVM CSS header and add the Authentication + * header size, and then convert to words. + * + * Return: zero on success, or a negative error code on failure. + */ +static int +ice_get_nvm_css_hdr_len(struct ice_hw *hw, enum ice_bank_select bank, + u32 *hdr_len) +{ + u16 hdr_len_l, hdr_len_h; + u32 hdr_len_dword; + int status; + + status = ice_read_nvm_module(hw, bank, ICE_NVM_CSS_HDR_LEN_L, + &hdr_len_l); + if (status) + return status; + + status = ice_read_nvm_module(hw, bank, ICE_NVM_CSS_HDR_LEN_H, + &hdr_len_h); + if (status) + return status; + + /* CSS header length is in DWORD, so convert to words and add + * authentication header size + */ + hdr_len_dword = hdr_len_h << 16 | hdr_len_l; + *hdr_len = (hdr_len_dword * 2) + ICE_NVM_AUTH_HEADER_LEN; + + return 0; +} + +/** + * ice_determine_css_hdr_len - Discover CSS header length for the device + * @hw: pointer to the HW struct + * + * Determine the size of the CSS header at the start of the NVM module. This + * is useful for locating the Shadow RAM copy in the NVM, as the Shadow RAM is + * always located just after the CSS header. + * + * Return: zero on success, or a negative error code on failure. + */ +static int ice_determine_css_hdr_len(struct ice_hw *hw) +{ + struct ice_bank_info *banks = &hw->flash.banks; + int status; + + status = ice_get_nvm_css_hdr_len(hw, ICE_ACTIVE_FLASH_BANK, + &banks->active_css_hdr_len); + if (status) + return status; + + status = ice_get_nvm_css_hdr_len(hw, ICE_INACTIVE_FLASH_BANK, + &banks->inactive_css_hdr_len); + if (status) + return status; + + return 0; +} + /** * ice_init_nvm - initializes NVM setting * @hw: pointer to the HW struct @@ -1069,6 +1149,12 @@ int ice_init_nvm(struct ice_hw *hw) return status; } + status = ice_determine_css_hdr_len(hw); + if (status) { + ice_debug(hw, ICE_DBG_NVM, "Failed to determine Shadow RAM copy offsets.\n"); + return status; + } + status = ice_get_nvm_ver_info(hw, ICE_ACTIVE_FLASH_BANK, &flash->nvm); if (status) { ice_debug(hw, ICE_DBG_INIT, "Failed to read NVM info.\n"); diff --git a/drivers/net/ethernet/intel/ice/ice_type.h b/drivers/net/ethernet/intel/ice/ice_type.h index f0796a93f428..eef397e5baa0 100644 --- a/drivers/net/ethernet/intel/ice/ice_type.h +++ b/drivers/net/ethernet/intel/ice/ice_type.h @@ -482,6 +482,8 @@ struct ice_bank_info { u32 orom_size; /* Size of OROM bank */ u32 netlist_ptr; /* Pointer to 1st Netlist bank */ u32 netlist_size; /* Size of Netlist bank */ + u32 active_css_hdr_len; /* Active CSS header length */ + u32 inactive_css_hdr_len; /* Inactive CSS header length */ enum ice_flash_bank nvm_bank; /* Active NVM bank */ enum ice_flash_bank orom_bank; /* Active OROM bank */ enum ice_flash_bank netlist_bank; /* Active Netlist bank */ @@ -1087,17 +1089,13 @@ struct ice_aq_get_set_rss_lut_params { #define ICE_SR_SECTOR_SIZE_IN_WORDS 0x800 /* CSS Header words */ +#define ICE_NVM_CSS_HDR_LEN_L 0x02 +#define ICE_NVM_CSS_HDR_LEN_H 0x03 #define ICE_NVM_CSS_SREV_L 0x14 #define ICE_NVM_CSS_SREV_H 0x15 -/* Length of CSS header section in words */ -#define ICE_CSS_HEADER_LENGTH 330 - -/* Offset of Shadow RAM copy in the NVM bank area. */ -#define ICE_NVM_SR_COPY_WORD_OFFSET roundup(ICE_CSS_HEADER_LENGTH, 32) - -/* Size in bytes of Option ROM trailer */ -#define ICE_NVM_OROM_TRAILER_LENGTH (2 * ICE_CSS_HEADER_LENGTH) +/* Length of Authentication header section in words */ +#define ICE_NVM_AUTH_HEADER_LEN 0x08 /* The Link Topology Netlist section is stored as a series of words. It is * stored in the NVM as a TLV, with the first two words containing the type -- cgit v1.2.3 From adbf5a42341f6ea038d3626cd4437d9f0ad0b2dd Mon Sep 17 00:00:00 2001 From: Larysa Zaremba Date: Mon, 3 Jun 2024 14:42:32 -0700 Subject: ice: remove af_xdp_zc_qps bitmap Referenced commit has introduced a bitmap to distinguish between ZC and copy-mode AF_XDP queues, because xsk_get_pool_from_qid() does not do this for us. The bitmap would be especially useful when restoring previous state after rebuild, if only it was not reallocated in the process. This leads to e.g. xdpsock dying after changing number of queues. Instead of preserving the bitmap during the rebuild, remove it completely and distinguish between ZC and copy-mode queues based on the presence of a device associated with the pool. Fixes: e102db780e1c ("ice: track AF_XDP ZC enabled queues in bitmap") Reviewed-by: Przemek Kitszel Signed-off-by: Larysa Zaremba Reviewed-by: Simon Horman Tested-by: Chandan Kumar Rout Signed-off-by: Jacob Keller Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-3-e3563aa89b0c@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/ice/ice.h | 32 +++++++++++++++++++++----------- drivers/net/ethernet/intel/ice/ice_lib.c | 8 -------- drivers/net/ethernet/intel/ice/ice_xsk.c | 13 ++++++------- 3 files changed, 27 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h index 6ad8002b22e1..5e51cb84b600 100644 --- a/drivers/net/ethernet/intel/ice/ice.h +++ b/drivers/net/ethernet/intel/ice/ice.h @@ -409,7 +409,6 @@ struct ice_vsi { struct ice_tc_cfg tc_cfg; struct bpf_prog *xdp_prog; struct ice_tx_ring **xdp_rings; /* XDP ring array */ - unsigned long *af_xdp_zc_qps; /* tracks AF_XDP ZC enabled qps */ u16 num_xdp_txq; /* Used XDP queues */ u8 xdp_mapping_mode; /* ICE_MAP_MODE_[CONTIG|SCATTER] */ @@ -746,6 +745,25 @@ static inline void ice_set_ring_xdp(struct ice_tx_ring *ring) ring->flags |= ICE_TX_FLAGS_RING_XDP; } +/** + * ice_get_xp_from_qid - get ZC XSK buffer pool bound to a queue ID + * @vsi: pointer to VSI + * @qid: index of a queue to look at XSK buff pool presence + * + * Return: A pointer to xsk_buff_pool structure if there is a buffer pool + * attached and configured as zero-copy, NULL otherwise. + */ +static inline struct xsk_buff_pool *ice_get_xp_from_qid(struct ice_vsi *vsi, + u16 qid) +{ + struct xsk_buff_pool *pool = xsk_get_pool_from_qid(vsi->netdev, qid); + + if (!ice_is_xdp_ena_vsi(vsi)) + return NULL; + + return (pool && pool->dev) ? pool : NULL; +} + /** * ice_xsk_pool - get XSK buffer pool bound to a ring * @ring: Rx ring to use @@ -758,10 +776,7 @@ static inline struct xsk_buff_pool *ice_xsk_pool(struct ice_rx_ring *ring) struct ice_vsi *vsi = ring->vsi; u16 qid = ring->q_index; - if (!ice_is_xdp_ena_vsi(vsi) || !test_bit(qid, vsi->af_xdp_zc_qps)) - return NULL; - - return xsk_get_pool_from_qid(vsi->netdev, qid); + return ice_get_xp_from_qid(vsi, qid); } /** @@ -786,12 +801,7 @@ static inline void ice_tx_xsk_pool(struct ice_vsi *vsi, u16 qid) if (!ring) return; - if (!ice_is_xdp_ena_vsi(vsi) || !test_bit(qid, vsi->af_xdp_zc_qps)) { - ring->xsk_pool = NULL; - return; - } - - ring->xsk_pool = xsk_get_pool_from_qid(vsi->netdev, qid); + ring->xsk_pool = ice_get_xp_from_qid(vsi, qid); } /** diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c index 5371e91f6bbb..c0a7ff6c7e87 100644 --- a/drivers/net/ethernet/intel/ice/ice_lib.c +++ b/drivers/net/ethernet/intel/ice/ice_lib.c @@ -114,14 +114,8 @@ static int ice_vsi_alloc_arrays(struct ice_vsi *vsi) if (!vsi->q_vectors) goto err_vectors; - vsi->af_xdp_zc_qps = bitmap_zalloc(max_t(int, vsi->alloc_txq, vsi->alloc_rxq), GFP_KERNEL); - if (!vsi->af_xdp_zc_qps) - goto err_zc_qps; - return 0; -err_zc_qps: - devm_kfree(dev, vsi->q_vectors); err_vectors: devm_kfree(dev, vsi->rxq_map); err_rxq_map: @@ -309,8 +303,6 @@ static void ice_vsi_free_arrays(struct ice_vsi *vsi) dev = ice_pf_to_dev(pf); - bitmap_free(vsi->af_xdp_zc_qps); - vsi->af_xdp_zc_qps = NULL; /* free the ring and vector containers */ devm_kfree(dev, vsi->q_vectors); vsi->q_vectors = NULL; diff --git a/drivers/net/ethernet/intel/ice/ice_xsk.c b/drivers/net/ethernet/intel/ice/ice_xsk.c index 7541f223bf4f..a65955eb23c0 100644 --- a/drivers/net/ethernet/intel/ice/ice_xsk.c +++ b/drivers/net/ethernet/intel/ice/ice_xsk.c @@ -269,7 +269,6 @@ static int ice_xsk_pool_disable(struct ice_vsi *vsi, u16 qid) if (!pool) return -EINVAL; - clear_bit(qid, vsi->af_xdp_zc_qps); xsk_pool_dma_unmap(pool, ICE_RX_DMA_ATTR); return 0; @@ -300,8 +299,6 @@ ice_xsk_pool_enable(struct ice_vsi *vsi, struct xsk_buff_pool *pool, u16 qid) if (err) return err; - set_bit(qid, vsi->af_xdp_zc_qps); - return 0; } @@ -349,11 +346,13 @@ ice_realloc_rx_xdp_bufs(struct ice_rx_ring *rx_ring, bool pool_present) int ice_realloc_zc_buf(struct ice_vsi *vsi, bool zc) { struct ice_rx_ring *rx_ring; - unsigned long q; + uint i; + + ice_for_each_rxq(vsi, i) { + rx_ring = vsi->rx_rings[i]; + if (!rx_ring->xsk_pool) + continue; - for_each_set_bit(q, vsi->af_xdp_zc_qps, - max_t(int, vsi->alloc_txq, vsi->alloc_rxq)) { - rx_ring = vsi->rx_rings[q]; if (ice_realloc_rx_xdp_bufs(rx_ring, zc)) return -ENOMEM; } -- cgit v1.2.3 From 744d197162c2070a6045a71e2666ed93a57cc65d Mon Sep 17 00:00:00 2001 From: Larysa Zaremba Date: Mon, 3 Jun 2024 14:42:33 -0700 Subject: ice: add flag to distinguish reset from .ndo_bpf in XDP rings config Commit 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") has placed ice_vsi_free_q_vectors() after ice_destroy_xdp_rings() in the rebuild process. The behaviour of the XDP rings config functions is context-dependent, so the change of order has led to ice_destroy_xdp_rings() doing additional work and removing XDP prog, when it was supposed to be preserved. Also, dependency on the PF state reset flags creates an additional, fortunately less common problem: * PFR is requested e.g. by tx_timeout handler * .ndo_bpf() is asked to delete the program, calls ice_destroy_xdp_rings(), but reset flag is set, so rings are destroyed without deleting the program * ice_vsi_rebuild tries to delete non-existent XDP rings, because the program is still on the VSI * system crashes With a similar race, when requested to attach a program, ice_prepare_xdp_rings() can actually skip setting the program in the VSI and nevertheless report success. Instead of reverting to the old order of function calls, add an enum argument to both ice_prepare_xdp_rings() and ice_destroy_xdp_rings() in order to distinguish between calls from rebuild and .ndo_bpf(). Fixes: efc2214b6047 ("ice: Add support for XDP") Reviewed-by: Igor Bagnucki Signed-off-by: Larysa Zaremba Reviewed-by: Simon Horman Tested-by: Chandan Kumar Rout Signed-off-by: Jacob Keller Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-4-e3563aa89b0c@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/ice/ice.h | 11 +++++++++-- drivers/net/ethernet/intel/ice/ice_lib.c | 5 +++-- drivers/net/ethernet/intel/ice/ice_main.c | 22 ++++++++++++---------- 3 files changed, 24 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h index 5e51cb84b600..a5de6ef9c07e 100644 --- a/drivers/net/ethernet/intel/ice/ice.h +++ b/drivers/net/ethernet/intel/ice/ice.h @@ -930,9 +930,16 @@ int ice_down(struct ice_vsi *vsi); int ice_down_up(struct ice_vsi *vsi); int ice_vsi_cfg_lan(struct ice_vsi *vsi); struct ice_vsi *ice_lb_vsi_setup(struct ice_pf *pf, struct ice_port_info *pi); + +enum ice_xdp_cfg { + ICE_XDP_CFG_FULL, /* Fully apply new config in .ndo_bpf() */ + ICE_XDP_CFG_PART, /* Save/use part of config in VSI rebuild */ +}; + int ice_vsi_determine_xdp_res(struct ice_vsi *vsi); -int ice_prepare_xdp_rings(struct ice_vsi *vsi, struct bpf_prog *prog); -int ice_destroy_xdp_rings(struct ice_vsi *vsi); +int ice_prepare_xdp_rings(struct ice_vsi *vsi, struct bpf_prog *prog, + enum ice_xdp_cfg cfg_type); +int ice_destroy_xdp_rings(struct ice_vsi *vsi, enum ice_xdp_cfg cfg_type); int ice_xdp_xmit(struct net_device *dev, int n, struct xdp_frame **frames, u32 flags); diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c index c0a7ff6c7e87..dd8b374823ee 100644 --- a/drivers/net/ethernet/intel/ice/ice_lib.c +++ b/drivers/net/ethernet/intel/ice/ice_lib.c @@ -2285,7 +2285,8 @@ static int ice_vsi_cfg_def(struct ice_vsi *vsi) ret = ice_vsi_determine_xdp_res(vsi); if (ret) goto unroll_vector_base; - ret = ice_prepare_xdp_rings(vsi, vsi->xdp_prog); + ret = ice_prepare_xdp_rings(vsi, vsi->xdp_prog, + ICE_XDP_CFG_PART); if (ret) goto unroll_vector_base; } @@ -2429,7 +2430,7 @@ void ice_vsi_decfg(struct ice_vsi *vsi) /* return value check can be skipped here, it always returns * 0 if reset is in progress */ - ice_destroy_xdp_rings(vsi); + ice_destroy_xdp_rings(vsi, ICE_XDP_CFG_PART); ice_vsi_clear_rings(vsi); ice_vsi_free_q_vectors(vsi); diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index f60c022f7960..2a270aacd24a 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -2711,10 +2711,12 @@ static void ice_vsi_assign_bpf_prog(struct ice_vsi *vsi, struct bpf_prog *prog) * ice_prepare_xdp_rings - Allocate, configure and setup Tx rings for XDP * @vsi: VSI to bring up Tx rings used by XDP * @prog: bpf program that will be assigned to VSI + * @cfg_type: create from scratch or restore the existing configuration * * Return 0 on success and negative value on error */ -int ice_prepare_xdp_rings(struct ice_vsi *vsi, struct bpf_prog *prog) +int ice_prepare_xdp_rings(struct ice_vsi *vsi, struct bpf_prog *prog, + enum ice_xdp_cfg cfg_type) { u16 max_txqs[ICE_MAX_TRAFFIC_CLASS] = { 0 }; int xdp_rings_rem = vsi->num_xdp_txq; @@ -2790,7 +2792,7 @@ int ice_prepare_xdp_rings(struct ice_vsi *vsi, struct bpf_prog *prog) * taken into account at the end of ice_vsi_rebuild, where * ice_cfg_vsi_lan is being called */ - if (ice_is_reset_in_progress(pf->state)) + if (cfg_type == ICE_XDP_CFG_PART) return 0; /* tell the Tx scheduler that right now we have @@ -2842,22 +2844,21 @@ err_map_xdp: /** * ice_destroy_xdp_rings - undo the configuration made by ice_prepare_xdp_rings * @vsi: VSI to remove XDP rings + * @cfg_type: disable XDP permanently or allow it to be restored later * * Detach XDP rings from irq vectors, clean up the PF bitmap and free * resources */ -int ice_destroy_xdp_rings(struct ice_vsi *vsi) +int ice_destroy_xdp_rings(struct ice_vsi *vsi, enum ice_xdp_cfg cfg_type) { u16 max_txqs[ICE_MAX_TRAFFIC_CLASS] = { 0 }; struct ice_pf *pf = vsi->back; int i, v_idx; /* q_vectors are freed in reset path so there's no point in detaching - * rings; in case of rebuild being triggered not from reset bits - * in pf->state won't be set, so additionally check first q_vector - * against NULL + * rings */ - if (ice_is_reset_in_progress(pf->state) || !vsi->q_vectors[0]) + if (cfg_type == ICE_XDP_CFG_PART) goto free_qmap; ice_for_each_q_vector(vsi, v_idx) { @@ -2898,7 +2899,7 @@ free_qmap: if (static_key_enabled(&ice_xdp_locking_key)) static_branch_dec(&ice_xdp_locking_key); - if (ice_is_reset_in_progress(pf->state) || !vsi->q_vectors[0]) + if (cfg_type == ICE_XDP_CFG_PART) return 0; ice_vsi_assign_bpf_prog(vsi, NULL); @@ -3009,7 +3010,8 @@ ice_xdp_setup_prog(struct ice_vsi *vsi, struct bpf_prog *prog, if (xdp_ring_err) { NL_SET_ERR_MSG_MOD(extack, "Not enough Tx resources for XDP"); } else { - xdp_ring_err = ice_prepare_xdp_rings(vsi, prog); + xdp_ring_err = ice_prepare_xdp_rings(vsi, prog, + ICE_XDP_CFG_FULL); if (xdp_ring_err) NL_SET_ERR_MSG_MOD(extack, "Setting up XDP Tx resources failed"); } @@ -3020,7 +3022,7 @@ ice_xdp_setup_prog(struct ice_vsi *vsi, struct bpf_prog *prog, NL_SET_ERR_MSG_MOD(extack, "Setting up XDP Rx resources failed"); } else if (ice_is_xdp_ena_vsi(vsi) && !prog) { xdp_features_clear_redirect_target(vsi->netdev); - xdp_ring_err = ice_destroy_xdp_rings(vsi); + xdp_ring_err = ice_destroy_xdp_rings(vsi, ICE_XDP_CFG_FULL); if (xdp_ring_err) NL_SET_ERR_MSG_MOD(extack, "Freeing XDP Tx resources failed"); /* reallocate Rx queues that were used for zero-copy */ -- cgit v1.2.3 From f3df4044254c98128890b512bf19cc05588f1fe5 Mon Sep 17 00:00:00 2001 From: Larysa Zaremba Date: Mon, 3 Jun 2024 14:42:34 -0700 Subject: ice: map XDP queues to vectors in ice_vsi_map_rings_to_vectors() ice_pf_dcb_recfg() re-maps queues to vectors with ice_vsi_map_rings_to_vectors(), which does not restore the previous state for XDP queues. This leads to no AF_XDP traffic after rebuild. Map XDP queues to vectors in ice_vsi_map_rings_to_vectors(). Also, move the code around, so XDP queues are mapped independently only through .ndo_bpf(). Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Reviewed-by: Przemek Kitszel Signed-off-by: Larysa Zaremba Reviewed-by: Simon Horman Tested-by: Chandan Kumar Rout Signed-off-by: Jacob Keller Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-5-e3563aa89b0c@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/ice/ice.h | 1 + drivers/net/ethernet/intel/ice/ice_base.c | 3 + drivers/net/ethernet/intel/ice/ice_lib.c | 14 ++--- drivers/net/ethernet/intel/ice/ice_main.c | 96 ++++++++++++++++++------------- 4 files changed, 68 insertions(+), 46 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h index a5de6ef9c07e..99a75a59078e 100644 --- a/drivers/net/ethernet/intel/ice/ice.h +++ b/drivers/net/ethernet/intel/ice/ice.h @@ -940,6 +940,7 @@ int ice_vsi_determine_xdp_res(struct ice_vsi *vsi); int ice_prepare_xdp_rings(struct ice_vsi *vsi, struct bpf_prog *prog, enum ice_xdp_cfg cfg_type); int ice_destroy_xdp_rings(struct ice_vsi *vsi, enum ice_xdp_cfg cfg_type); +void ice_map_xdp_rings(struct ice_vsi *vsi); int ice_xdp_xmit(struct net_device *dev, int n, struct xdp_frame **frames, u32 flags); diff --git a/drivers/net/ethernet/intel/ice/ice_base.c b/drivers/net/ethernet/intel/ice/ice_base.c index 687f6cb2b917..5d396c1a7731 100644 --- a/drivers/net/ethernet/intel/ice/ice_base.c +++ b/drivers/net/ethernet/intel/ice/ice_base.c @@ -842,6 +842,9 @@ void ice_vsi_map_rings_to_vectors(struct ice_vsi *vsi) } rx_rings_rem -= rx_rings_per_v; } + + if (ice_is_xdp_ena_vsi(vsi)) + ice_map_xdp_rings(vsi); } /** diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c index dd8b374823ee..7629b0190578 100644 --- a/drivers/net/ethernet/intel/ice/ice_lib.c +++ b/drivers/net/ethernet/intel/ice/ice_lib.c @@ -2274,13 +2274,6 @@ static int ice_vsi_cfg_def(struct ice_vsi *vsi) if (ret) goto unroll_vector_base; - ice_vsi_map_rings_to_vectors(vsi); - - /* Associate q_vector rings to napi */ - ice_vsi_set_napi_queues(vsi); - - vsi->stat_offsets_loaded = false; - if (ice_is_xdp_ena_vsi(vsi)) { ret = ice_vsi_determine_xdp_res(vsi); if (ret) @@ -2291,6 +2284,13 @@ static int ice_vsi_cfg_def(struct ice_vsi *vsi) goto unroll_vector_base; } + ice_vsi_map_rings_to_vectors(vsi); + + /* Associate q_vector rings to napi */ + ice_vsi_set_napi_queues(vsi); + + vsi->stat_offsets_loaded = false; + /* ICE_VSI_CTRL does not need RSS so skip RSS processing */ if (vsi->type != ICE_VSI_CTRL) /* Do not exit if configuring RSS had an issue, at diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index 2a270aacd24a..1b61ca3a6eb6 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -2707,6 +2707,60 @@ static void ice_vsi_assign_bpf_prog(struct ice_vsi *vsi, struct bpf_prog *prog) bpf_prog_put(old_prog); } +static struct ice_tx_ring *ice_xdp_ring_from_qid(struct ice_vsi *vsi, int qid) +{ + struct ice_q_vector *q_vector; + struct ice_tx_ring *ring; + + if (static_key_enabled(&ice_xdp_locking_key)) + return vsi->xdp_rings[qid % vsi->num_xdp_txq]; + + q_vector = vsi->rx_rings[qid]->q_vector; + ice_for_each_tx_ring(ring, q_vector->tx) + if (ice_ring_is_xdp(ring)) + return ring; + + return NULL; +} + +/** + * ice_map_xdp_rings - Map XDP rings to interrupt vectors + * @vsi: the VSI with XDP rings being configured + * + * Map XDP rings to interrupt vectors and perform the configuration steps + * dependent on the mapping. + */ +void ice_map_xdp_rings(struct ice_vsi *vsi) +{ + int xdp_rings_rem = vsi->num_xdp_txq; + int v_idx, q_idx; + + /* follow the logic from ice_vsi_map_rings_to_vectors */ + ice_for_each_q_vector(vsi, v_idx) { + struct ice_q_vector *q_vector = vsi->q_vectors[v_idx]; + int xdp_rings_per_v, q_id, q_base; + + xdp_rings_per_v = DIV_ROUND_UP(xdp_rings_rem, + vsi->num_q_vectors - v_idx); + q_base = vsi->num_xdp_txq - xdp_rings_rem; + + for (q_id = q_base; q_id < (q_base + xdp_rings_per_v); q_id++) { + struct ice_tx_ring *xdp_ring = vsi->xdp_rings[q_id]; + + xdp_ring->q_vector = q_vector; + xdp_ring->next = q_vector->tx.tx_ring; + q_vector->tx.tx_ring = xdp_ring; + } + xdp_rings_rem -= xdp_rings_per_v; + } + + ice_for_each_rxq(vsi, q_idx) { + vsi->rx_rings[q_idx]->xdp_ring = ice_xdp_ring_from_qid(vsi, + q_idx); + ice_tx_xsk_pool(vsi, q_idx); + } +} + /** * ice_prepare_xdp_rings - Allocate, configure and setup Tx rings for XDP * @vsi: VSI to bring up Tx rings used by XDP @@ -2719,7 +2773,6 @@ int ice_prepare_xdp_rings(struct ice_vsi *vsi, struct bpf_prog *prog, enum ice_xdp_cfg cfg_type) { u16 max_txqs[ICE_MAX_TRAFFIC_CLASS] = { 0 }; - int xdp_rings_rem = vsi->num_xdp_txq; struct ice_pf *pf = vsi->back; struct ice_qs_cfg xdp_qs_cfg = { .qs_mutex = &pf->avail_q_mutex, @@ -2732,8 +2785,7 @@ int ice_prepare_xdp_rings(struct ice_vsi *vsi, struct bpf_prog *prog, .mapping_mode = ICE_VSI_MAP_CONTIG }; struct device *dev; - int i, v_idx; - int status; + int status, i; dev = ice_pf_to_dev(pf); vsi->xdp_rings = devm_kcalloc(dev, vsi->num_xdp_txq, @@ -2752,42 +2804,6 @@ int ice_prepare_xdp_rings(struct ice_vsi *vsi, struct bpf_prog *prog, if (ice_xdp_alloc_setup_rings(vsi)) goto clear_xdp_rings; - /* follow the logic from ice_vsi_map_rings_to_vectors */ - ice_for_each_q_vector(vsi, v_idx) { - struct ice_q_vector *q_vector = vsi->q_vectors[v_idx]; - int xdp_rings_per_v, q_id, q_base; - - xdp_rings_per_v = DIV_ROUND_UP(xdp_rings_rem, - vsi->num_q_vectors - v_idx); - q_base = vsi->num_xdp_txq - xdp_rings_rem; - - for (q_id = q_base; q_id < (q_base + xdp_rings_per_v); q_id++) { - struct ice_tx_ring *xdp_ring = vsi->xdp_rings[q_id]; - - xdp_ring->q_vector = q_vector; - xdp_ring->next = q_vector->tx.tx_ring; - q_vector->tx.tx_ring = xdp_ring; - } - xdp_rings_rem -= xdp_rings_per_v; - } - - ice_for_each_rxq(vsi, i) { - if (static_key_enabled(&ice_xdp_locking_key)) { - vsi->rx_rings[i]->xdp_ring = vsi->xdp_rings[i % vsi->num_xdp_txq]; - } else { - struct ice_q_vector *q_vector = vsi->rx_rings[i]->q_vector; - struct ice_tx_ring *ring; - - ice_for_each_tx_ring(ring, q_vector->tx) { - if (ice_ring_is_xdp(ring)) { - vsi->rx_rings[i]->xdp_ring = ring; - break; - } - } - } - ice_tx_xsk_pool(vsi, i); - } - /* omit the scheduler update if in reset path; XDP queues will be * taken into account at the end of ice_vsi_rebuild, where * ice_cfg_vsi_lan is being called @@ -2795,6 +2811,8 @@ int ice_prepare_xdp_rings(struct ice_vsi *vsi, struct bpf_prog *prog, if (cfg_type == ICE_XDP_CFG_PART) return 0; + ice_map_xdp_rings(vsi); + /* tell the Tx scheduler that right now we have * additional queues */ -- cgit v1.2.3 From 7d67d11fbe194f71298263f48e33ae2afa38197e Mon Sep 17 00:00:00 2001 From: Sasha Neftin Date: Mon, 3 Jun 2024 14:42:35 -0700 Subject: igc: Fix Energy Efficient Ethernet support declaration The commit 01cf893bf0f4 ("net: intel: i40e/igc: Remove setting Autoneg in EEE capabilities") removed SUPPORTED_Autoneg field but left inappropriate ethtool_keee structure initialization. When "ethtool --show " (get_eee) invoke, the 'ethtool_keee' structure was accidentally overridden. Remove the 'ethtool_keee' overriding and add EEE declaration as per IEEE specification that allows reporting Energy Efficient Ethernet capabilities. Examples: Before fix: ethtool --show-eee enp174s0 EEE settings for enp174s0: EEE status: not supported After fix: EEE settings for enp174s0: EEE status: disabled Tx LPI: disabled Supported EEE link modes: 100baseT/Full 1000baseT/Full 2500baseT/Full Fixes: 01cf893bf0f4 ("net: intel: i40e/igc: Remove setting Autoneg in EEE capabilities") Suggested-by: Dima Ruinskiy Signed-off-by: Sasha Neftin Tested-by: Naama Meir Signed-off-by: Jacob Keller Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-6-e3563aa89b0c@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/igc/igc_ethtool.c | 9 +++++++-- drivers/net/ethernet/intel/igc/igc_main.c | 4 ++++ 2 files changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igc/igc_ethtool.c b/drivers/net/ethernet/intel/igc/igc_ethtool.c index f2c4f1966bb0..0cd2bd695db1 100644 --- a/drivers/net/ethernet/intel/igc/igc_ethtool.c +++ b/drivers/net/ethernet/intel/igc/igc_ethtool.c @@ -1629,12 +1629,17 @@ static int igc_ethtool_get_eee(struct net_device *netdev, struct igc_hw *hw = &adapter->hw; u32 eeer; + linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, + edata->supported); + linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, + edata->supported); + linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, + edata->supported); + if (hw->dev_spec._base.eee_enable) mii_eee_cap1_mod_linkmode_t(edata->advertised, adapter->eee_advert); - *edata = adapter->eee; - eeer = rd32(IGC_EEER); /* EEE status on negotiated link */ diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c index 12f004f46082..305e05294a26 100644 --- a/drivers/net/ethernet/intel/igc/igc_main.c +++ b/drivers/net/ethernet/intel/igc/igc_main.c @@ -12,6 +12,7 @@ #include #include #include +#include #include @@ -4975,6 +4976,9 @@ void igc_up(struct igc_adapter *adapter) /* start the watchdog. */ hw->mac.get_link_status = true; schedule_work(&adapter->watchdog_task); + + adapter->eee_advert = MDIO_EEE_100TX | MDIO_EEE_1000T | + MDIO_EEE_2_5GT; } /** -- cgit v1.2.3 From 5703fc058efdafcdd6b70776ee562478f0753acb Mon Sep 17 00:00:00 2001 From: Ian Forbes Date: Thu, 28 Mar 2024 14:07:16 -0500 Subject: drm/vmwgfx: Don't memcmp equivalent pointers These pointers are frequently the same and memcmp does not compare the pointers before comparing their contents so this was wasting cycles comparing 16 KiB of memory which will always be equal. Fixes: bb6780aa5a1d ("drm/vmwgfx: Diff cursors when using cmds") Signed-off-by: Ian Forbes Signed-off-by: Zack Rusin Link: https://patchwork.freedesktop.org/patch/msgid/20240328190716.27367-1-ian.forbes@broadcom.com --- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 9532258a0848..00c4ff684130 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -224,7 +224,7 @@ static bool vmw_du_cursor_plane_has_changed(struct vmw_plane_state *old_vps, new_image = vmw_du_cursor_plane_acquire_image(new_vps); changed = false; - if (old_image && new_image) + if (old_image && new_image && old_image != new_image) changed = memcmp(old_image, new_image, size) != 0; return changed; -- cgit v1.2.3 From b0c9a26435413b81799047a7be53255640432547 Mon Sep 17 00:00:00 2001 From: Aleksandr Mishin Date: Tue, 4 Jun 2024 11:25:00 +0300 Subject: net: wwan: iosm: Fix tainted pointer delete is case of region creation fail In case of region creation fail in ipc_devlink_create_region(), previously created regions delete process starts from tainted pointer which actually holds error code value. Fix this bug by decreasing region index before delete. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 4dcd183fbd67 ("net: wwan: iosm: devlink registration") Signed-off-by: Aleksandr Mishin Acked-by: Sergey Ryazanov Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20240604082500.20769-1-amishin@t-argos.ru Signed-off-by: Paolo Abeni --- drivers/net/wwan/iosm/iosm_ipc_devlink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wwan/iosm/iosm_ipc_devlink.c b/drivers/net/wwan/iosm/iosm_ipc_devlink.c index bef6819986e9..33d6342124bc 100644 --- a/drivers/net/wwan/iosm/iosm_ipc_devlink.c +++ b/drivers/net/wwan/iosm/iosm_ipc_devlink.c @@ -211,7 +211,7 @@ static int ipc_devlink_create_region(struct iosm_devlink *devlink) rc = PTR_ERR(devlink->cd_regions[i]); dev_err(devlink->dev, "Devlink region fail,err %d", rc); /* Delete previously created regions */ - for ( ; i >= 0; i--) + for (i--; i >= 0; i--) devlink_region_destroy(devlink->cd_regions[i]); goto region_create_fail; } -- cgit v1.2.3 From 09fe2bfa6b83f865126ce3964744863f69a4a030 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 6 Jun 2024 21:14:45 +1000 Subject: ata: pata_macio: Fix max_segment_size with PAGE_SIZE == 64K The pata_macio driver advertises a max_segment_size of 0xff00, because the hardware doesn't cope with requests >= 64K. However the SCSI core requires max_segment_size to be at least PAGE_SIZE, which is a problem for pata_macio when the kernel is built with 64K pages. In older kernels the SCSI core would just increase the segment size to be equal to PAGE_SIZE, however since the commit tagged below it causes a warning and the device fails to probe: WARNING: CPU: 0 PID: 26 at block/blk-settings.c:202 .blk_validate_limits+0x2f8/0x35c CPU: 0 PID: 26 Comm: kworker/u4:1 Not tainted 6.10.0-rc1 #1 Hardware name: PowerMac7,2 PPC970 0x390202 PowerMac ... NIP .blk_validate_limits+0x2f8/0x35c LR .blk_alloc_queue+0xc0/0x2f8 Call Trace: .blk_alloc_queue+0xc0/0x2f8 .blk_mq_alloc_queue+0x60/0xf8 .scsi_alloc_sdev+0x208/0x3c0 .scsi_probe_and_add_lun+0x314/0x52c .__scsi_add_device+0x170/0x1a4 .ata_scsi_scan_host+0x2bc/0x3e4 .async_port_probe+0x6c/0xa0 .async_run_entry_fn+0x60/0x1bc .process_one_work+0x228/0x510 .worker_thread+0x360/0x530 .kthread+0x134/0x13c .start_kernel_thread+0x10/0x14 ... scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured Although the hardware can't cope with a 64K segment, the driver already deals with that internally by splitting large requests in pata_macio_qc_prep(). That is how the driver has managed to function until now on 64K kernels. So fix the driver to advertise a max_segment_size of 64K, which avoids the warning and keeps the SCSI core happy. Fixes: afd53a3d8528 ("scsi: core: Initialize scsi midlayer limits before allocating the queue") Reported-by: Guenter Roeck Closes: https://lore.kernel.org/all/ce2bf6af-4382-4fe1-b392-cc6829f5ceb2@roeck-us.net/ Reported-by: Doru Iorgulescu Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218858 Signed-off-by: Michael Ellerman Reviewed-by: Christoph Hellwig Reviewed-by: Damien Le Moal Reviewed-by: John Garry Signed-off-by: Niklas Cassel --- drivers/ata/pata_macio.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_macio.c b/drivers/ata/pata_macio.c index 817838e2f70e..3cb455a32d92 100644 --- a/drivers/ata/pata_macio.c +++ b/drivers/ata/pata_macio.c @@ -915,10 +915,13 @@ static const struct scsi_host_template pata_macio_sht = { .sg_tablesize = MAX_DCMDS, /* We may not need that strict one */ .dma_boundary = ATA_DMA_BOUNDARY, - /* Not sure what the real max is but we know it's less than 64K, let's - * use 64K minus 256 + /* + * The SCSI core requires the segment size to cover at least a page, so + * for 64K page size kernels this must be at least 64K. However the + * hardware can't handle 64K, so pata_macio_qc_prep() will split large + * requests. */ - .max_segment_size = MAX_DBDMA_SEG, + .max_segment_size = SZ_64K, .device_configure = pata_macio_device_configure, .sdev_groups = ata_common_sdev_groups, .can_queue = ATA_DEF_QUEUE, -- cgit v1.2.3 From e96b2933152fd87b6a41765b2f58b158fde855b6 Mon Sep 17 00:00:00 2001 From: "Csókás, Bence" Date: Wed, 5 Jun 2024 10:42:51 +0200 Subject: net: sfp: Always call `sfp_sm_mod_remove()` on remove MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the module is in SFP_MOD_ERROR, `sfp_sm_mod_remove()` will not be run. As a consequence, `sfp_hwmon_remove()` is not getting run either, leaving a stale `hwmon` device behind. `sfp_sm_mod_remove()` itself checks `sfp->sm_mod_state` anyways, so this check was not really needed in the first place. Fixes: d2e816c0293f ("net: sfp: handle module remove outside state machine") Signed-off-by: "Csókás, Bence" Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20240605084251.63502-1-csokas.bence@prolan.hu Signed-off-by: Jakub Kicinski --- drivers/net/phy/sfp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index 3f9cbd797fd6..a5684ef5884b 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -2429,8 +2429,7 @@ static void sfp_sm_module(struct sfp *sfp, unsigned int event) /* Handle remove event globally, it resets this state machine */ if (event == SFP_E_REMOVE) { - if (sfp->sm_mod_state > SFP_MOD_PROBE) - sfp_sm_mod_remove(sfp); + sfp_sm_mod_remove(sfp); sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0); return; } -- cgit v1.2.3 From 64054eb716db52e4246527dc9414377c5bc5b01d Mon Sep 17 00:00:00 2001 From: Jeff Johnson Date: Thu, 6 Jun 2024 20:23:50 -0700 Subject: gpio: add missing MODULE_DESCRIPTION() macros On x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpio/gpio-gw-pld.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpio/gpio-mc33880.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpio/gpio-pcf857x.o Add the missing invocations of the MODULE_DESCRIPTION() macro, including the one missing in gpio-pl061.c, which is not built for x86. Signed-off-by: Jeff Johnson Link: https://lore.kernel.org/r/20240606-md-drivers-gpio-v1-1-cb42d240ca5c@quicinc.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-gw-pld.c | 1 + drivers/gpio/gpio-mc33880.c | 1 + drivers/gpio/gpio-pcf857x.c | 1 + drivers/gpio/gpio-pl061.c | 1 + 4 files changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpio/gpio-gw-pld.c b/drivers/gpio/gpio-gw-pld.c index 899335da93c7..7e29a2d8de1a 100644 --- a/drivers/gpio/gpio-gw-pld.c +++ b/drivers/gpio/gpio-gw-pld.c @@ -130,5 +130,6 @@ static struct i2c_driver gw_pld_driver = { }; module_i2c_driver(gw_pld_driver); +MODULE_DESCRIPTION("Gateworks I2C PLD GPIO expander"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Linus Walleij "); diff --git a/drivers/gpio/gpio-mc33880.c b/drivers/gpio/gpio-mc33880.c index cd9b16dbe1a9..94f6fefc011b 100644 --- a/drivers/gpio/gpio-mc33880.c +++ b/drivers/gpio/gpio-mc33880.c @@ -168,5 +168,6 @@ static void __exit mc33880_exit(void) module_exit(mc33880_exit); MODULE_AUTHOR("Mocean Laboratories "); +MODULE_DESCRIPTION("MC33880 high-side/low-side switch GPIO driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c index 53b69abe6787..7c57eaeb0afe 100644 --- a/drivers/gpio/gpio-pcf857x.c +++ b/drivers/gpio/gpio-pcf857x.c @@ -438,5 +438,6 @@ static void __exit pcf857x_exit(void) } module_exit(pcf857x_exit); +MODULE_DESCRIPTION("Driver for pcf857x, pca857x, and pca967x I2C GPIO expanders"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("David Brownell"); diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c index 9fc1f3dd4190..a211a02d4b4a 100644 --- a/drivers/gpio/gpio-pl061.c +++ b/drivers/gpio/gpio-pl061.c @@ -438,4 +438,5 @@ static struct amba_driver pl061_gpio_driver = { }; module_amba_driver(pl061_gpio_driver); +MODULE_DESCRIPTION("Driver for the ARM PrimeCell(tm) General Purpose Input/Output (PL061)"); MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From 89e1ee118d6f0ee6bd6e80d8fe08839875daa241 Mon Sep 17 00:00:00 2001 From: Andrew Ballance Date: Sun, 2 Jun 2024 03:50:23 -0500 Subject: hid: asus: asus_report_fixup: fix potential read out of bounds syzbot reported a potential read out of bounds in asus_report_fixup. this patch adds checks so that a read out of bounds will not occur Signed-off-by: Andrew Ballance Reported-by: Closes: https://syzkaller.appspot.com/bug?extid=07762f019fd03d01f04c Fixes: 59d2f5b7392e ("HID: asus: fix more n-key report descriptors if n-key quirked") Link: https://lore.kernel.org/r/20240602085023.1720492-1-andrewjballance@gmail.com Signed-off-by: Benjamin Tissoires --- drivers/hid/hid-asus.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c index 02de2bf4f790..37e6d25593c2 100644 --- a/drivers/hid/hid-asus.c +++ b/drivers/hid/hid-asus.c @@ -1204,8 +1204,8 @@ static __u8 *asus_report_fixup(struct hid_device *hdev, __u8 *rdesc, } /* match many more n-key devices */ - if (drvdata->quirks & QUIRK_ROG_NKEY_KEYBOARD) { - for (int i = 0; i < *rsize + 1; i++) { + if (drvdata->quirks & QUIRK_ROG_NKEY_KEYBOARD && *rsize > 15) { + for (int i = 0; i < *rsize - 15; i++) { /* offset to the count from 0x5a report part always 14 */ if (rdesc[i] == 0x85 && rdesc[i + 1] == 0x5a && rdesc[i + 14] == 0x95 && rdesc[i + 15] == 0x05) { -- cgit v1.2.3 From 0c7dd00de018ff70b3452c424901816e26366a8a Mon Sep 17 00:00:00 2001 From: Aseda Aboagye Date: Tue, 4 Jun 2024 23:10:47 +0000 Subject: input: Add event code for accessibility key HUTRR116 added support for a new usage titled "System Accessibility Binding" which toggles a system-wide bound accessibility UI or command. This commit simply adds a new event code for the usage. Signed-off-by: Aseda Aboagye Acked-by: Dmitry Torokhov Link: https://lore.kernel.org/r/Zl-e97O9nvudco5z@google.com Signed-off-by: Benjamin Tissoires --- drivers/hid/hid-debug.c | 1 + drivers/hid/hid-input.c | 1 + include/uapi/linux/input-event-codes.h | 1 + 3 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c index 87a961cae775..322ed63a98ab 100644 --- a/drivers/hid/hid-debug.c +++ b/drivers/hid/hid-debug.c @@ -3366,6 +3366,7 @@ static const char *keys[KEY_MAX + 1] = { [KEY_CAMERA_ACCESS_ENABLE] = "CameraAccessEnable", [KEY_CAMERA_ACCESS_DISABLE] = "CameraAccessDisable", [KEY_CAMERA_ACCESS_TOGGLE] = "CameraAccessToggle", + [KEY_ACCESSIBILITY] = "Accessibility", [KEY_DICTATE] = "Dictate", [KEY_MICMUTE] = "MicrophoneMute", [KEY_BRIGHTNESS_MIN] = "BrightnessMin", diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index e03d300d2bac..d5a6e89c3086 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -836,6 +836,7 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel if ((usage->hid & 0xf0) == 0xa0) { /* SystemControl */ switch (usage->hid & 0xf) { case 0x9: map_key_clear(KEY_MICMUTE); break; + case 0xa: map_key_clear(KEY_ACCESSIBILITY); break; default: goto ignore; } break; diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h index 03edf2ccdf6c..39f11ec676fa 100644 --- a/include/uapi/linux/input-event-codes.h +++ b/include/uapi/linux/input-event-codes.h @@ -618,6 +618,7 @@ #define KEY_CAMERA_ACCESS_ENABLE 0x24b /* Enables programmatic access to camera devices. (HUTRR72) */ #define KEY_CAMERA_ACCESS_DISABLE 0x24c /* Disables programmatic access to camera devices. (HUTRR72) */ #define KEY_CAMERA_ACCESS_TOGGLE 0x24d /* Toggles the current state of the camera access control. (HUTRR72) */ +#define KEY_ACCESSIBILITY 0x24e /* Toggles the system bound accessibility UI/command (HUTRR116) */ #define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */ #define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */ -- cgit v1.2.3 From 22d6d060ac77955291deb43efc2f3f4f9632c6cb Mon Sep 17 00:00:00 2001 From: Aseda Aboagye Date: Tue, 4 Jun 2024 23:16:32 +0000 Subject: input: Add support for "Do Not Disturb" HUTRR94 added support for a new usage titled "System Do Not Disturb" which toggles a system-wide Do Not Disturb setting. This commit simply adds a new event code for the usage. Signed-off-by: Aseda Aboagye Acked-by: Dmitry Torokhov Link: https://lore.kernel.org/r/Zl-gUHE70s7wCAoB@google.com Signed-off-by: Benjamin Tissoires --- drivers/hid/hid-debug.c | 1 + drivers/hid/hid-input.c | 8 ++++++++ include/uapi/linux/input-event-codes.h | 1 + 3 files changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c index 322ed63a98ab..d5abfe652fb5 100644 --- a/drivers/hid/hid-debug.c +++ b/drivers/hid/hid-debug.c @@ -3367,6 +3367,7 @@ static const char *keys[KEY_MAX + 1] = { [KEY_CAMERA_ACCESS_DISABLE] = "CameraAccessDisable", [KEY_CAMERA_ACCESS_TOGGLE] = "CameraAccessToggle", [KEY_ACCESSIBILITY] = "Accessibility", + [KEY_DO_NOT_DISTURB] = "DoNotDisturb", [KEY_DICTATE] = "Dictate", [KEY_MICMUTE] = "MicrophoneMute", [KEY_BRIGHTNESS_MIN] = "BrightnessMin", diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index d5a6e89c3086..8bb16e9b94aa 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -833,6 +833,14 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel break; } + if ((usage->hid & 0xf0) == 0x90) { /* SystemControl*/ + switch (usage->hid & 0xf) { + case 0xb: map_key_clear(KEY_DO_NOT_DISTURB); break; + default: goto ignore; + } + break; + } + if ((usage->hid & 0xf0) == 0xa0) { /* SystemControl */ switch (usage->hid & 0xf) { case 0x9: map_key_clear(KEY_MICMUTE); break; diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h index 39f11ec676fa..a4206723f503 100644 --- a/include/uapi/linux/input-event-codes.h +++ b/include/uapi/linux/input-event-codes.h @@ -619,6 +619,7 @@ #define KEY_CAMERA_ACCESS_DISABLE 0x24c /* Disables programmatic access to camera devices. (HUTRR72) */ #define KEY_CAMERA_ACCESS_TOGGLE 0x24d /* Toggles the current state of the camera access control. (HUTRR72) */ #define KEY_ACCESSIBILITY 0x24e /* Toggles the system bound accessibility UI/command (HUTRR116) */ +#define KEY_DO_NOT_DISTURB 0x24f /* Toggles the system-wide "Do Not Disturb" control (HUTRR94)*/ #define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */ #define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */ -- cgit v1.2.3 From 0eafc58f2194dbd01d4be40f99a697681171995b Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 7 May 2024 16:48:18 +0200 Subject: HID: i2c-hid: elan: fix reset suspend current leakage The Elan eKTH5015M touch controller found on the Lenovo ThinkPad X13s shares the VCC33 supply with other peripherals that may remain powered during suspend (e.g. when enabled as wakeup sources). The reset line is also wired so that it can be left deasserted when the supply is off. This is important as it avoids holding the controller in reset for extended periods of time when it remains powered, which can lead to increased power consumption, and also avoids leaking current through the X13s reset circuitry during suspend (and after driver unbind). Use the new 'no-reset-on-power-off' devicetree property to determine when reset needs to be asserted on power down. Notably this also avoids wasting power on machine variants without a touchscreen for which the driver would otherwise exit probe with reset asserted. Fixes: bd3cba00dcc6 ("HID: i2c-hid: elan: Add support for Elan eKTH6915 i2c-hid touchscreens") Cc: # 6.0 Cc: Douglas Anderson Tested-by: Steev Klimaszewski Signed-off-by: Johan Hovold Reviewed-by: Douglas Anderson Link: https://lore.kernel.org/r/20240507144821.12275-5-johan+linaro@kernel.org Signed-off-by: Benjamin Tissoires --- drivers/hid/i2c-hid/i2c-hid-of-elan.c | 59 ++++++++++++++++++++++++++++------- 1 file changed, 47 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/i2c-hid/i2c-hid-of-elan.c b/drivers/hid/i2c-hid/i2c-hid-of-elan.c index 5b91fb106cfc..091e37933225 100644 --- a/drivers/hid/i2c-hid/i2c-hid-of-elan.c +++ b/drivers/hid/i2c-hid/i2c-hid-of-elan.c @@ -31,6 +31,7 @@ struct i2c_hid_of_elan { struct regulator *vcc33; struct regulator *vccio; struct gpio_desc *reset_gpio; + bool no_reset_on_power_off; const struct elan_i2c_hid_chip_data *chip_data; }; @@ -40,17 +41,17 @@ static int elan_i2c_hid_power_up(struct i2chid_ops *ops) container_of(ops, struct i2c_hid_of_elan, ops); int ret; + gpiod_set_value_cansleep(ihid_elan->reset_gpio, 1); + if (ihid_elan->vcc33) { ret = regulator_enable(ihid_elan->vcc33); if (ret) - return ret; + goto err_deassert_reset; } ret = regulator_enable(ihid_elan->vccio); - if (ret) { - regulator_disable(ihid_elan->vcc33); - return ret; - } + if (ret) + goto err_disable_vcc33; if (ihid_elan->chip_data->post_power_delay_ms) msleep(ihid_elan->chip_data->post_power_delay_ms); @@ -60,6 +61,15 @@ static int elan_i2c_hid_power_up(struct i2chid_ops *ops) msleep(ihid_elan->chip_data->post_gpio_reset_on_delay_ms); return 0; + +err_disable_vcc33: + if (ihid_elan->vcc33) + regulator_disable(ihid_elan->vcc33); +err_deassert_reset: + if (ihid_elan->no_reset_on_power_off) + gpiod_set_value_cansleep(ihid_elan->reset_gpio, 0); + + return ret; } static void elan_i2c_hid_power_down(struct i2chid_ops *ops) @@ -67,7 +77,14 @@ static void elan_i2c_hid_power_down(struct i2chid_ops *ops) struct i2c_hid_of_elan *ihid_elan = container_of(ops, struct i2c_hid_of_elan, ops); - gpiod_set_value_cansleep(ihid_elan->reset_gpio, 1); + /* + * Do not assert reset when the hardware allows for it to remain + * deasserted regardless of the state of the (shared) power supply to + * avoid wasting power when the supply is left on. + */ + if (!ihid_elan->no_reset_on_power_off) + gpiod_set_value_cansleep(ihid_elan->reset_gpio, 1); + if (ihid_elan->chip_data->post_gpio_reset_off_delay_ms) msleep(ihid_elan->chip_data->post_gpio_reset_off_delay_ms); @@ -79,6 +96,7 @@ static void elan_i2c_hid_power_down(struct i2chid_ops *ops) static int i2c_hid_of_elan_probe(struct i2c_client *client) { struct i2c_hid_of_elan *ihid_elan; + int ret; ihid_elan = devm_kzalloc(&client->dev, sizeof(*ihid_elan), GFP_KERNEL); if (!ihid_elan) @@ -93,21 +111,38 @@ static int i2c_hid_of_elan_probe(struct i2c_client *client) if (IS_ERR(ihid_elan->reset_gpio)) return PTR_ERR(ihid_elan->reset_gpio); + ihid_elan->no_reset_on_power_off = of_property_read_bool(client->dev.of_node, + "no-reset-on-power-off"); + ihid_elan->vccio = devm_regulator_get(&client->dev, "vccio"); - if (IS_ERR(ihid_elan->vccio)) - return PTR_ERR(ihid_elan->vccio); + if (IS_ERR(ihid_elan->vccio)) { + ret = PTR_ERR(ihid_elan->vccio); + goto err_deassert_reset; + } ihid_elan->chip_data = device_get_match_data(&client->dev); if (ihid_elan->chip_data->main_supply_name) { ihid_elan->vcc33 = devm_regulator_get(&client->dev, ihid_elan->chip_data->main_supply_name); - if (IS_ERR(ihid_elan->vcc33)) - return PTR_ERR(ihid_elan->vcc33); + if (IS_ERR(ihid_elan->vcc33)) { + ret = PTR_ERR(ihid_elan->vcc33); + goto err_deassert_reset; + } } - return i2c_hid_core_probe(client, &ihid_elan->ops, - ihid_elan->chip_data->hid_descriptor_address, 0); + ret = i2c_hid_core_probe(client, &ihid_elan->ops, + ihid_elan->chip_data->hid_descriptor_address, 0); + if (ret) + goto err_deassert_reset; + + return 0; + +err_deassert_reset: + if (ihid_elan->no_reset_on_power_off) + gpiod_set_value_cansleep(ihid_elan->reset_gpio, 0); + + return ret; } static const struct elan_i2c_hid_chip_data elan_ekth6915_chip_data = { -- cgit v1.2.3 From 12cda920212a49fa22d9e8b9492ac4ea013310a4 Mon Sep 17 00:00:00 2001 From: Yonglong Liu Date: Wed, 5 Jun 2024 15:20:57 +0800 Subject: net: hns3: fix kernel crash problem in concurrent scenario When link status change, the nic driver need to notify the roce driver to handle this event, but at this time, the roce driver may uninit, then cause kernel crash. To fix the problem, when link status change, need to check whether the roce registered, and when uninit, need to wait link update finish. Fixes: 45e92b7e4e27 ("net: hns3: add calling roce callback function when link status change") Signed-off-by: Yonglong Liu Signed-off-by: Jijie Shao Reviewed-by: Simon Horman Signed-off-by: David S. Miller --- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 43cc6ee4d87d..82574ce0194f 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -3086,9 +3086,7 @@ static void hclge_push_link_status(struct hclge_dev *hdev) static void hclge_update_link_status(struct hclge_dev *hdev) { - struct hnae3_handle *rhandle = &hdev->vport[0].roce; struct hnae3_handle *handle = &hdev->vport[0].nic; - struct hnae3_client *rclient = hdev->roce_client; struct hnae3_client *client = hdev->nic_client; int state; int ret; @@ -3112,8 +3110,15 @@ static void hclge_update_link_status(struct hclge_dev *hdev) client->ops->link_status_change(handle, state); hclge_config_mac_tnl_int(hdev, state); - if (rclient && rclient->ops->link_status_change) - rclient->ops->link_status_change(rhandle, state); + + if (test_bit(HCLGE_STATE_ROCE_REGISTERED, &hdev->state)) { + struct hnae3_handle *rhandle = &hdev->vport[0].roce; + struct hnae3_client *rclient = hdev->roce_client; + + if (rclient && rclient->ops->link_status_change) + rclient->ops->link_status_change(rhandle, + state); + } hclge_push_link_status(hdev); } @@ -11319,6 +11324,12 @@ clear_roce: return ret; } +static bool hclge_uninit_need_wait(struct hclge_dev *hdev) +{ + return test_bit(HCLGE_STATE_RST_HANDLING, &hdev->state) || + test_bit(HCLGE_STATE_LINK_UPDATING, &hdev->state); +} + static void hclge_uninit_client_instance(struct hnae3_client *client, struct hnae3_ae_dev *ae_dev) { @@ -11327,7 +11338,7 @@ static void hclge_uninit_client_instance(struct hnae3_client *client, if (hdev->roce_client) { clear_bit(HCLGE_STATE_ROCE_REGISTERED, &hdev->state); - while (test_bit(HCLGE_STATE_RST_HANDLING, &hdev->state)) + while (hclge_uninit_need_wait(hdev)) msleep(HCLGE_WAIT_RESET_DONE); hdev->roce_client->ops->uninit_instance(&vport->roce, 0); -- cgit v1.2.3 From 968fde83841a8c23558dfbd0a0c69d636db52b55 Mon Sep 17 00:00:00 2001 From: Jie Wang Date: Wed, 5 Jun 2024 15:20:58 +0800 Subject: net: hns3: add cond_resched() to hns3 ring buffer init process Currently hns3 ring buffer init process would hold cpu too long with big Tx/Rx ring depth. This could cause soft lockup. So this patch adds cond_resched() to the process. Then cpu can break to run other tasks instead of busy looping. Fixes: a723fb8efe29 ("net: hns3: refine for set ring parameters") Signed-off-by: Jie Wang Signed-off-by: Jijie Shao Reviewed-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 4 ++++ drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 2 ++ 2 files changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index ff71fb1eced9..a5fc0209d628 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -3535,6 +3535,9 @@ static int hns3_alloc_ring_buffers(struct hns3_enet_ring *ring) ret = hns3_alloc_and_attach_buffer(ring, i); if (ret) goto out_buffer_fail; + + if (!(i % HNS3_RESCHED_BD_NUM)) + cond_resched(); } return 0; @@ -5107,6 +5110,7 @@ int hns3_init_all_ring(struct hns3_nic_priv *priv) } u64_stats_init(&priv->ring[i].syncp); + cond_resched(); } return 0; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h index acd756b0c7c9..d36c4ed16d8d 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h @@ -214,6 +214,8 @@ enum hns3_nic_state { #define HNS3_CQ_MODE_EQE 1U #define HNS3_CQ_MODE_CQE 0U +#define HNS3_RESCHED_BD_NUM 1024 + enum hns3_pkt_l2t_type { HNS3_L2_TYPE_UNICAST, HNS3_L2_TYPE_MULTICAST, -- cgit v1.2.3 From 1af89dedc8a58006d8e385b1e0d2cd24df8a3b69 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 6 Jun 2024 20:27:19 +0200 Subject: thermal: core: Do not fail cdev registration because of invalid initial state It is reported that commit 31a0fa0019b0 ("thermal/debugfs: Pass cooling device state to thermal_debug_cdev_add()") causes the ACPI fan driver to fail probing on some systems which turns out to be due to the _FST control method returning an invalid value until _FSL is first evaluated for the given fan. If this happens, the .get_cur_state() cooling device callback returns an error and __thermal_cooling_device_register() fails as uses that callback after commit 31a0fa0019b0. Arguably, _FST should not return an invalid value even if it is evaluated before _FSL, so this may be regarded as a platform firmware issue, but at the same time it is not a good enough reason for failing the cooling device registration where the initial cooling device state is only needed to initialize a thermal debug facility. Accordingly, modify __thermal_cooling_device_register() to avoid calling thermal_debug_cdev_add() instead of returning an error if the initial .get_cur_state() callback invocation fails. Fixes: 31a0fa0019b0 ("thermal/debugfs: Pass cooling device state to thermal_debug_cdev_add()") Closes: https://lore.kernel.org/linux-acpi/20240530153727.843378-1-laura.nao@collabora.com Reported-by: Laura Nao Signed-off-by: Rafael J. Wysocki Acked-by: Daniel Lezcano Tested-by: Laura Nao --- drivers/thermal/thermal_core.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 30567b499455..d70e76dd3c94 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -999,9 +999,17 @@ __thermal_cooling_device_register(struct device_node *np, if (ret) goto out_cdev_type; + /* + * The cooling device's current state is only needed for debug + * initialization below, so a failure to get it does not cause + * the entire cooling device initialization to fail. However, + * the debug will not work for the device if its initial state + * cannot be determined and drivers are responsible for ensuring + * that this will not happen. + */ ret = cdev->ops->get_cur_state(cdev, ¤t_state); if (ret) - goto out_cdev_type; + current_state = ULONG_MAX; thermal_cooling_device_setup_sysfs(cdev); @@ -1016,7 +1024,8 @@ __thermal_cooling_device_register(struct device_node *np, return ERR_PTR(ret); } - thermal_debug_cdev_add(cdev, current_state); + if (current_state <= cdev->max_state) + thermal_debug_cdev_add(cdev, current_state); /* Add 'this' new cdev to the global cdev list */ mutex_lock(&thermal_list_lock); -- cgit v1.2.3 From 7f18bd49cb6b6a3ab6d860fefccdc94f2a247db0 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 6 Jun 2024 20:27:30 +0200 Subject: thermal: ACPI: Invalidate trip points with temperature of 0 or below It is reported that commit 950210887670 ("thermal: core: Drop trips_disabled bitmask") causes the maximum frequency of CPUs to drop further down with every system sleep-wake cycle on Intel Core i7-4710HQ. This turns out to be due to a trip point whose temperature is equal to 0 degrees Celsius which is acted on every time the system wakes from sleep. Before commit 950210887670 this trip point would be disabled wia the trips_disabled bitmask, but now it is treated as a valid one. Since ACPI thermal control is generally about protection against overheating, trip points with temperature of 0 centigrade or below are not particularly useful there, so initialize them all as invalid which fixes the problem at hand. Fixes: 950210887670 ("thermal: core: Drop trips_disabled bitmask") Closes: https://lore.kernel.org/linux-pm/3f71747b-f852-4ee0-b384-cf46b2aefa3f@gmx.com Reported-by: Tibor Billes Tested-by: Tibor Billes Cc: 6.7+ # 6.7+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/thermal.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index d67881b50bca..a0cfc857fb55 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -168,11 +168,17 @@ static int acpi_thermal_get_polling_frequency(struct acpi_thermal *tz) static int acpi_thermal_temp(struct acpi_thermal *tz, int temp_deci_k) { + int temp; + if (temp_deci_k == THERMAL_TEMP_INVALID) return THERMAL_TEMP_INVALID; - return deci_kelvin_to_millicelsius_with_offset(temp_deci_k, + temp = deci_kelvin_to_millicelsius_with_offset(temp_deci_k, tz->kelvin_offset); + if (temp <= 0) + return THERMAL_TEMP_INVALID; + + return temp; } static bool acpi_thermal_trip_valid(struct acpi_thermal_trip *acpi_trip) -- cgit v1.2.3 From c44711b78608c98a3e6b49ce91678cd0917d5349 Mon Sep 17 00:00:00 2001 From: Aleksandr Mishin Date: Wed, 5 Jun 2024 13:11:35 +0300 Subject: liquidio: Adjust a NULL pointer handling path in lio_vf_rep_copy_packet In lio_vf_rep_copy_packet() pg_info->page is compared to a NULL value, but then it is unconditionally passed to skb_add_rx_frag() which looks strange and could lead to null pointer dereference. lio_vf_rep_copy_packet() call trace looks like: octeon_droq_process_packets octeon_droq_fast_process_packets octeon_droq_dispatch_pkt octeon_create_recv_info ...search in the dispatch_list... ->disp_fn(rdisp->rinfo, ...) lio_vf_rep_pkt_recv(struct octeon_recv_info *recv_info, ...) In this path there is no code which sets pg_info->page to NULL. So this check looks unneeded and doesn't solve potential problem. But I guess the author had reason to add a check and I have no such card and can't do real test. In addition, the code in the function liquidio_push_packet() in liquidio/lio_core.c does exactly the same. Based on this, I consider the most acceptable compromise solution to adjust this issue by moving skb_add_rx_frag() into conditional scope. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 1f233f327913 ("liquidio: switchdev support for LiquidIO NIC") Signed-off-by: Aleksandr Mishin Reviewed-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c b/drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c index 96c6ea12279f..989b4ddae342 100644 --- a/drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c +++ b/drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c @@ -272,13 +272,12 @@ lio_vf_rep_copy_packet(struct octeon_device *oct, pg_info->page_offset; memcpy(skb->data, va, MIN_SKB_SIZE); skb_put(skb, MIN_SKB_SIZE); + skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, + pg_info->page, + pg_info->page_offset + MIN_SKB_SIZE, + len - MIN_SKB_SIZE, + LIO_RXBUFFER_SZ); } - - skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, - pg_info->page, - pg_info->page_offset + MIN_SKB_SIZE, - len - MIN_SKB_SIZE, - LIO_RXBUFFER_SZ); } else { struct octeon_skb_page_info *pg_info = ((struct octeon_skb_page_info *)(skb->cb)); -- cgit v1.2.3 From 0c76053e3fec801e86aca73f80072b3da4e72849 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Thu, 16 May 2024 11:33:43 +0300 Subject: drm: have config DRM_WERROR depend on !WERROR If WERROR is already enabled, there's no point in enabling DRM_WERROR or asking users about it. Reported-by: Linus Torvalds Closes: https://lore.kernel.org/r/CAHk-=whxT8D_0j=bjtrvj-O=VEOjn6GW8GK4j2V+BiDUntZKAQ@mail.gmail.com Fixes: f89632a9e5fa ("drm: Add CONFIG_DRM_WERROR") Reviewed-by: Javier Martinez Canillas Link: https://patchwork.freedesktop.org/patch/msgid/20240516083343.1375687-1-jani.nikula@intel.com Signed-off-by: Jani Nikula --- drivers/gpu/drm/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 026444eeb5c6..d0aa277fc3bf 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -450,6 +450,7 @@ config DRM_PRIVACY_SCREEN config DRM_WERROR bool "Compile the drm subsystem with warnings as errors" depends on DRM && EXPERT + depends on !WERROR default n help A kernel build should not cause any compiler warnings, and this -- cgit v1.2.3 From a3a5a37efba11b7cf1a86abe7bccfbcdb521764e Mon Sep 17 00:00:00 2001 From: Louis Dalibard Date: Fri, 7 Jun 2024 16:53:43 +0200 Subject: HID: Ignore battery for ELAN touchscreens 2F2C and 4116 At least ASUS Zenbook 14 (2023) and ASUS Zenbook 14 Pro (2023) are affected. The touchscreen reports a battery status of 0% and jumps to 1% when a stylus is used. The device ID was added and the battery ignore quirk was enabled for it. [jkosina@suse.com: reformatted changelog a bit] Signed-off-by: Louis Dalibard Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 2 ++ drivers/hid/hid-input.c | 4 ++++ 2 files changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 61d2a21affa2..72d56ee7ce1b 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -423,6 +423,8 @@ #define I2C_DEVICE_ID_HP_SPECTRE_X360_13_AW0020NG 0x29DF #define I2C_DEVICE_ID_ASUS_TP420IA_TOUCHSCREEN 0x2BC8 #define I2C_DEVICE_ID_ASUS_GV301RA_TOUCHSCREEN 0x2C82 +#define I2C_DEVICE_ID_ASUS_UX3402_TOUCHSCREEN 0x2F2C +#define I2C_DEVICE_ID_ASUS_UX6404_TOUCHSCREEN 0x4116 #define USB_DEVICE_ID_ASUS_UX550VE_TOUCHSCREEN 0x2544 #define USB_DEVICE_ID_ASUS_UX550_TOUCHSCREEN 0x2706 #define I2C_DEVICE_ID_SURFACE_GO_TOUCHSCREEN 0x261A diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index 8bb16e9b94aa..c9094a4f281e 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -377,6 +377,10 @@ static const struct hid_device_id hid_battery_quirks[] = { HID_BATTERY_QUIRK_IGNORE }, { HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_ASUS_GV301RA_TOUCHSCREEN), HID_BATTERY_QUIRK_IGNORE }, + { HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_ASUS_UX3402_TOUCHSCREEN), + HID_BATTERY_QUIRK_IGNORE }, + { HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_ASUS_UX6404_TOUCHSCREEN), + HID_BATTERY_QUIRK_IGNORE }, { HID_USB_DEVICE(USB_VENDOR_ID_ELAN, USB_DEVICE_ID_ASUS_UX550_TOUCHSCREEN), HID_BATTERY_QUIRK_IGNORE }, { HID_USB_DEVICE(USB_VENDOR_ID_ELAN, USB_DEVICE_ID_ASUS_UX550VE_TOUCHSCREEN), -- cgit v1.2.3 From e79a10652bbd320649da705ca1ea0c04351af403 Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Thu, 9 May 2024 13:45:02 -0500 Subject: ACPI: x86: Force StorageD3Enable on more products A Rembrandt-based HP thin client is reported to have problems where the NVME disk isn't present after resume from s2idle. This is because the NVME disk wasn't put into D3 at suspend, and that happened because the StorageD3Enable _DSD was missing in the BIOS. As AMD's architecture requires that the NVME is in D3 for s2idle, adjust the criteria for force_storage_d3 to match *all* Zen SoCs when the FADT advertises low power idle support. This will ensure that any future products with this BIOS deficiency don't need to be added to the allow list of overrides. Cc: All applicable Signed-off-by: Mario Limonciello Acked-by: Hans de Goede Signed-off-by: Rafael J. Wysocki --- drivers/acpi/x86/utils.c | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c index 7dca73417e2b..2fe0934dcd64 100644 --- a/drivers/acpi/x86/utils.c +++ b/drivers/acpi/x86/utils.c @@ -206,16 +206,16 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s } /* - * AMD systems from Renoir and Lucienne *require* that the NVME controller + * AMD systems from Renoir onwards *require* that the NVME controller * is put into D3 over a Modern Standby / suspend-to-idle cycle. * * This is "typically" accomplished using the `StorageD3Enable` * property in the _DSD that is checked via the `acpi_storage_d3` function - * but this property was introduced after many of these systems launched - * and most OEM systems don't have it in their BIOS. + * but some OEM systems still don't have it in their BIOS. * * The Microsoft documentation for StorageD3Enable mentioned that Windows has - * a hardcoded allowlist for D3 support, which was used for these platforms. + * a hardcoded allowlist for D3 support as well as a registry key to override + * the BIOS, which has been used for these cases. * * This allows quirking on Linux in a similar fashion. * @@ -228,19 +228,15 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s * https://bugzilla.kernel.org/show_bug.cgi?id=216773 * https://bugzilla.kernel.org/show_bug.cgi?id=217003 * 2) On at least one HP system StorageD3Enable is missing on the second NVME - disk in the system. + * disk in the system. + * 3) On at least one HP Rembrandt system StorageD3Enable is missing on the only + * NVME device. */ -static const struct x86_cpu_id storage_d3_cpu_ids[] = { - X86_MATCH_VENDOR_FAM_MODEL(AMD, 23, 24, NULL), /* Picasso */ - X86_MATCH_VENDOR_FAM_MODEL(AMD, 23, 96, NULL), /* Renoir */ - X86_MATCH_VENDOR_FAM_MODEL(AMD, 23, 104, NULL), /* Lucienne */ - X86_MATCH_VENDOR_FAM_MODEL(AMD, 25, 80, NULL), /* Cezanne */ - {} -}; - bool force_storage_d3(void) { - return x86_match_cpu(storage_d3_cpu_ids); + if (!cpu_feature_enabled(X86_FEATURE_ZEN)) + return false; + return acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0; } /* -- cgit v1.2.3 From 0579f27249047006a818e463ee66a6c314d04cea Mon Sep 17 00:00:00 2001 From: Sagar Cheluvegowda Date: Wed, 5 Jun 2024 11:57:18 -0700 Subject: net: stmmac: dwmac-qcom-ethqos: Configure host DMA width Commit 070246e4674b ("net: stmmac: Fix for mismatched host/device DMA address width") added support in the stmmac driver for platform drivers to indicate the host DMA width, but left it up to authors of the specific platforms to indicate if their width differed from the addr64 register read from the MAC itself. Qualcomm's EMAC4 integration supports only up to 36 bit width (as opposed to the addr64 register indicating 40 bit width). Let's indicate that in the platform driver to avoid a scenario where the driver will allocate descriptors of size that is supported by the CPU which in our case is 36 bit, but as the addr64 register is still capable of 40 bits the device will use two descriptors as one address. Fixes: 8c4d92e82d50 ("net: stmmac: dwmac-qcom-ethqos: add support for emac4 on sa8775p platforms") Signed-off-by: Sagar Cheluvegowda Reviewed-by: Simon Horman Reviewed-by: Andrew Halaney Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c index e254b21fdb59..65d7370b47d5 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c @@ -93,6 +93,7 @@ struct ethqos_emac_driver_data { bool has_emac_ge_3; const char *link_clk_name; bool has_integrated_pcs; + u32 dma_addr_width; struct dwmac4_addrs dwmac4_addrs; }; @@ -276,6 +277,7 @@ static const struct ethqos_emac_driver_data emac_v4_0_0_data = { .has_emac_ge_3 = true, .link_clk_name = "phyaux", .has_integrated_pcs = true, + .dma_addr_width = 36, .dwmac4_addrs = { .dma_chan = 0x00008100, .dma_chan_offset = 0x1000, @@ -845,6 +847,8 @@ static int qcom_ethqos_probe(struct platform_device *pdev) plat_dat->flags |= STMMAC_FLAG_RX_CLK_RUNS_IN_LPI; if (data->has_integrated_pcs) plat_dat->flags |= STMMAC_FLAG_HAS_INTEGRATED_PCS; + if (data->dma_addr_width) + plat_dat->host_dma_width = data->dma_addr_width; if (ethqos->serdes_phy) { plat_dat->serdes_powerup = qcom_ethqos_serdes_powerup; -- cgit v1.2.3 From 799d4b392417ed6889030a5b2335ccb6dcf030ab Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 25 Apr 2024 11:48:51 +0200 Subject: drm/exynos: hdmi: report safe 640x480 mode as a fallback when no EDID found When reading EDID fails and driver reports no modes available, the DRM core adds an artificial 1024x786 mode to the connector. Unfortunately some variants of the Exynos HDMI (like the one in Exynos4 SoCs) are not able to drive such mode, so report a safe 640x480 mode instead of nothing in case of the EDID reading failure. This fixes the following issue observed on Trats2 board since commit 13d5b040363c ("drm/exynos: do not return negative values from .get_modes()"): [drm] Exynos DRM: using 11c00000.fimd device for DMA mapping operations exynos-drm exynos-drm: bound 11c00000.fimd (ops fimd_component_ops) exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) exynos-dsi 11c80000.dsi: [drm:samsung_dsim_host_attach] Attached s6e8aa0 device (lanes:4 bpp:24 mode-flags:0x10b) exynos-drm exynos-drm: bound 11c80000.dsi (ops exynos_dsi_component_ops) exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 exynos-hdmi 12d00000.hdmi: [drm:hdmiphy_enable.part.0] *ERROR* PLL could not reach steady state panel-samsung-s6e8aa0 11c80000.dsi.0: ID: 0xa2, 0x20, 0x8c exynos-mixer 12c10000.mixer: timeout waiting for VSYNC ------------[ cut here ]------------ WARNING: CPU: 1 PID: 11 at drivers/gpu/drm/drm_atomic_helper.c:1682 drm_atomic_helper_wait_for_vblanks.part.0+0x2b0/0x2b8 [CRTC:70:crtc-1] vblank wait timed out Modules linked in: CPU: 1 PID: 11 Comm: kworker/u16:0 Not tainted 6.9.0-rc5-next-20240424 #14913 Hardware name: Samsung Exynos (Flattened Device Tree) Workqueue: events_unbound deferred_probe_work_func Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x68/0x88 dump_stack_lvl from __warn+0x7c/0x1c4 __warn from warn_slowpath_fmt+0x11c/0x1a8 warn_slowpath_fmt from drm_atomic_helper_wait_for_vblanks.part.0+0x2b0/0x2b8 drm_atomic_helper_wait_for_vblanks.part.0 from drm_atomic_helper_commit_tail_rpm+0x7c/0x8c drm_atomic_helper_commit_tail_rpm from commit_tail+0x9c/0x184 commit_tail from drm_atomic_helper_commit+0x168/0x190 drm_atomic_helper_commit from drm_atomic_commit+0xb4/0xe0 drm_atomic_commit from drm_client_modeset_commit_atomic+0x23c/0x27c drm_client_modeset_commit_atomic from drm_client_modeset_commit_locked+0x60/0x1cc drm_client_modeset_commit_locked from drm_client_modeset_commit+0x24/0x40 drm_client_modeset_commit from __drm_fb_helper_restore_fbdev_mode_unlocked+0x9c/0xc4 __drm_fb_helper_restore_fbdev_mode_unlocked from drm_fb_helper_set_par+0x2c/0x3c drm_fb_helper_set_par from fbcon_init+0x3d8/0x550 fbcon_init from visual_init+0xc0/0x108 visual_init from do_bind_con_driver+0x1b8/0x3a4 do_bind_con_driver from do_take_over_console+0x140/0x1ec do_take_over_console from do_fbcon_takeover+0x70/0xd0 do_fbcon_takeover from fbcon_fb_registered+0x19c/0x1ac fbcon_fb_registered from register_framebuffer+0x190/0x21c register_framebuffer from __drm_fb_helper_initial_config_and_unlock+0x350/0x574 __drm_fb_helper_initial_config_and_unlock from exynos_drm_fbdev_client_hotplug+0x6c/0xb0 exynos_drm_fbdev_client_hotplug from drm_client_register+0x58/0x94 drm_client_register from exynos_drm_bind+0x160/0x190 exynos_drm_bind from try_to_bring_up_aggregate_device+0x200/0x2d8 try_to_bring_up_aggregate_device from __component_add+0xb0/0x170 __component_add from mixer_probe+0x74/0xcc mixer_probe from platform_probe+0x5c/0xb8 platform_probe from really_probe+0xe0/0x3d8 really_probe from __driver_probe_device+0x9c/0x1e4 __driver_probe_device from driver_probe_device+0x30/0xc0 driver_probe_device from __device_attach_driver+0xa8/0x120 __device_attach_driver from bus_for_each_drv+0x80/0xcc bus_for_each_drv from __device_attach+0xac/0x1fc __device_attach from bus_probe_device+0x8c/0x90 bus_probe_device from deferred_probe_work_func+0x98/0xe0 deferred_probe_work_func from process_one_work+0x240/0x6d0 process_one_work from worker_thread+0x1a0/0x3f4 worker_thread from kthread+0x104/0x138 kthread from ret_from_fork+0x14/0x28 Exception stack(0xf0895fb0 to 0xf0895ff8) ... irq event stamp: 82357 hardirqs last enabled at (82363): [] vprintk_emit+0x308/0x33c hardirqs last disabled at (82368): [] vprintk_emit+0x2bc/0x33c softirqs last enabled at (81614): [] __do_softirq+0x320/0x500 softirqs last disabled at (81609): [] __irq_exit_rcu+0x130/0x184 ---[ end trace 0000000000000000 ]--- exynos-drm exynos-drm: [drm] *ERROR* flip_done timed out exynos-drm exynos-drm: [drm] *ERROR* [CRTC:70:crtc-1] commit wait timed out exynos-drm exynos-drm: [drm] *ERROR* flip_done timed out exynos-drm exynos-drm: [drm] *ERROR* [CONNECTOR:74:HDMI-A-1] commit wait timed out exynos-drm exynos-drm: [drm] *ERROR* flip_done timed out exynos-drm exynos-drm: [drm] *ERROR* [PLANE:56:plane-5] commit wait timed out exynos-mixer 12c10000.mixer: timeout waiting for VSYNC Cc: stable@vger.kernel.org Fixes: 13d5b040363c ("drm/exynos: do not return negative values from .get_modes()") Signed-off-by: Marek Szyprowski Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_hdmi.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index e968824a4c72..1e26cd4f8347 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -887,11 +887,11 @@ static int hdmi_get_modes(struct drm_connector *connector) int ret; if (!hdata->ddc_adpt) - return 0; + goto no_edid; edid = drm_get_edid(connector, hdata->ddc_adpt); if (!edid) - return 0; + goto no_edid; hdata->dvi_mode = !connector->display_info.is_hdmi; DRM_DEV_DEBUG_KMS(hdata->dev, "%s : width[%d] x height[%d]\n", @@ -906,6 +906,9 @@ static int hdmi_get_modes(struct drm_connector *connector) kfree(edid); return ret; + +no_edid: + return drm_add_modes_noedid(connector, 640, 480); } static int hdmi_find_phy_conf(struct hdmi_context *hdata, u32 pixel_clock) -- cgit v1.2.3 From 1f3512cdf8299f9edaea9046d53ea324a7730bab Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 4 Jun 2024 15:11:29 +0200 Subject: drm/exynos: dp: drop driver owner initialization Core in platform_driver_register() already sets the .owner, so driver does not need to. Whatever is set here will be anyway overwritten by main driver calling platform_driver_register(). Signed-off-by: Krzysztof Kozlowski Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_dp.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_dp.c b/drivers/gpu/drm/exynos/exynos_dp.c index f48c4343f469..3e6d4c6aa877 100644 --- a/drivers/gpu/drm/exynos/exynos_dp.c +++ b/drivers/gpu/drm/exynos/exynos_dp.c @@ -285,7 +285,6 @@ struct platform_driver dp_driver = { .remove_new = exynos_dp_remove, .driver = { .name = "exynos-dp", - .owner = THIS_MODULE, .pm = pm_ptr(&exynos_dp_pm_ops), .of_match_table = exynos_dp_match, }, -- cgit v1.2.3 From fe8a08973a0dea9757394c5adbdc3c0a03b0b432 Mon Sep 17 00:00:00 2001 From: Yazen Ghannam Date: Fri, 7 Jun 2024 16:32:59 -0500 Subject: RAS/AMD/ATL: Fix MI300 bank hash Apply the SID bits to the correct offset in the Bank value. Do this in the temporary value so they don't need to be masked off later. Fixes: 87a612375307 ("RAS/AMD/ATL: Add MI300 DRAM to normalized address translation support") Signed-off-by: Yazen Ghannam Signed-off-by: Borislav Petkov (AMD) Cc: Link: https://lore.kernel.org/r/20240607-mi300-dram-xl-fix-v1-1-2f11547a178c@amd.com --- drivers/ras/amd/atl/umc.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/ras/amd/atl/umc.c b/drivers/ras/amd/atl/umc.c index 59b6169093f7..5cb92330dc67 100644 --- a/drivers/ras/amd/atl/umc.c +++ b/drivers/ras/amd/atl/umc.c @@ -189,16 +189,11 @@ static unsigned long convert_dram_to_norm_addr_mi300(unsigned long addr) /* Calculate hash for PC bit. */ if (addr_hash.pc.xor_enable) { - /* Bits SID[1:0] act as Bank[6:5] for PC hash, so apply them here. */ - bank |= sid << 5; - temp = bitwise_xor_bits(col & addr_hash.pc.col_xor); temp ^= bitwise_xor_bits(row & addr_hash.pc.row_xor); - temp ^= bitwise_xor_bits(bank & addr_hash.bank_xor); + /* Bits SID[1:0] act as Bank[5:4] for PC hash, so apply them here. */ + temp ^= bitwise_xor_bits((bank | sid << NUM_BANK_BITS) & addr_hash.bank_xor); pc ^= temp; - - /* Drop SID bits for the sake of debug printing later. */ - bank &= 0x1F; } /* Reconstruct the normalized address starting with NA[4:0] = 0 */ -- cgit v1.2.3 From 38e3825631b1f314b21e3ade00b5a4d737eb054e Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Thu, 30 May 2024 13:01:51 +0300 Subject: drm/exynos/vidi: fix memory leak in .get_modes() The duplicated EDID is never freed. Fix it. Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_vidi.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_vidi.c b/drivers/gpu/drm/exynos/exynos_drm_vidi.c index fab135308b70..11a720fef32b 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_vidi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_vidi.c @@ -309,6 +309,7 @@ static int vidi_get_modes(struct drm_connector *connector) struct vidi_context *ctx = ctx_from_connector(connector); struct edid *edid; int edid_len; + int count; /* * the edid data comes from user side and it would be set @@ -328,7 +329,11 @@ static int vidi_get_modes(struct drm_connector *connector) drm_connector_update_edid_property(connector, edid); - return drm_add_edid_modes(connector, edid); + count = drm_add_edid_modes(connector, edid); + + kfree(edid); + + return count; } static const struct drm_connector_helper_funcs vidi_connector_helper_funcs = { -- cgit v1.2.3 From f74fb5df429ebc6a614dc5aa9e44d7194d402e5a Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Sun, 10 Mar 2024 23:04:00 +0100 Subject: drm: panel-orientation-quirks: Add quirk for Aya Neo KUN Similar to the other Aya Neo devices this one features again a portrait screen, here with a native resolution of 1600x2560. Signed-off-by: Tobias Jakobi Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Link: https://patchwork.freedesktop.org/patch/msgid/20240310220401.895591-1-tjakobi@math.uni-bielefeld.de --- drivers/gpu/drm/drm_panel_orientation_quirks.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c index aa93129c3397..2166208a961d 100644 --- a/drivers/gpu/drm/drm_panel_orientation_quirks.c +++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c @@ -202,6 +202,12 @@ static const struct dmi_system_id orientation_data[] = { DMI_MATCH(DMI_BOARD_NAME, "NEXT"), }, .driver_data = (void *)&lcd800x1280_rightside_up, + }, { /* AYA NEO KUN */ + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AYANEO"), + DMI_MATCH(DMI_BOARD_NAME, "KUN"), + }, + .driver_data = (void *)&lcd1600x2560_rightside_up, }, { /* Chuwi HiBook (CWI514) */ .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Hampoo"), -- cgit v1.2.3 From 5add2f7288468f35a374620dabf126c13baaea9c Mon Sep 17 00:00:00 2001 From: David Wei Date: Thu, 6 Jun 2024 07:59:08 -0700 Subject: netdevsim: fix backwards compatibility in nsim_get_iflink() The default ndo_get_iflink() implementation returns the current ifindex of the netdev. But the overridden nsim_get_iflink() returns 0 if the current nsim is not linked, breaking backwards compatibility for userspace that depend on this behaviour. Fix the problem by returning the current ifindex if not linked to a peer. Fixes: 8debcf5832c3 ("netdevsim: add ndo_get_iflink() implementation") Reported-by: Yu Watanabe Suggested-by: Yu Watanabe Signed-off-by: David Wei Signed-off-by: David S. Miller --- drivers/net/netdevsim/netdev.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/netdevsim/netdev.c b/drivers/net/netdevsim/netdev.c index c22897bf5509..017a6102be0a 100644 --- a/drivers/net/netdevsim/netdev.c +++ b/drivers/net/netdevsim/netdev.c @@ -324,7 +324,8 @@ static int nsim_get_iflink(const struct net_device *dev) rcu_read_lock(); peer = rcu_dereference(nsim->peer); - iflink = peer ? READ_ONCE(peer->netdev->ifindex) : 0; + iflink = peer ? READ_ONCE(peer->netdev->ifindex) : + READ_ONCE(dev->ifindex); rcu_read_unlock(); return iflink; -- cgit v1.2.3 From b880018edd3a577e50366338194dee9b899947e0 Mon Sep 17 00:00:00 2001 From: Amjad Ouled-Ameur Date: Mon, 10 Jun 2024 11:20:56 +0100 Subject: drm/komeda: check for error-valued pointer komeda_pipeline_get_state() may return an error-valued pointer, thus check the pointer for negative or null value before dereferencing. Fixes: 502932a03fce ("drm/komeda: Add the initial scaler support for CORE") Signed-off-by: Amjad Ouled-Ameur Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20240610102056.40406-1-amjad.ouled-ameur@arm.com --- drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c index f3e744172673..f4e76b46ca32 100644 --- a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c +++ b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c @@ -259,7 +259,7 @@ komeda_component_get_avail_scaler(struct komeda_component *c, u32 avail_scalers; pipe_st = komeda_pipeline_get_state(c->pipeline, state); - if (!pipe_st) + if (IS_ERR_OR_NULL(pipe_st)) return NULL; avail_scalers = (pipe_st->active_comps & KOMEDA_PIPELINE_SCALERS) ^ -- cgit v1.2.3 From ce62600c4dbee8d43b02277669dd91785a9b81d9 Mon Sep 17 00:00:00 2001 From: Adam Miotk Date: Mon, 10 Jun 2024 11:27:39 +0100 Subject: drm/bridge/panel: Fix runtime warning on panel bridge release Device managed panel bridge wrappers are created by calling to drm_panel_bridge_add_typed() and registering a release handler for clean-up when the device gets unbound. Since the memory for this bridge is also managed and linked to the panel device, the release function should not try to free that memory. Moreover, the call to devm_kfree() inside drm_panel_bridge_remove() will fail in this case and emit a warning because the panel bridge resource is no longer on the device resources list (it has been removed from there before the call to release handlers). Fixes: 67022227ffb1 ("drm/bridge: Add a devm_ allocator for panel bridge.") Signed-off-by: Adam Miotk Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20240610102739.139852-1-adam.miotk@arm.com --- drivers/gpu/drm/bridge/panel.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/bridge/panel.c b/drivers/gpu/drm/bridge/panel.c index 32506524d9a2..fe5fb08c9fc4 100644 --- a/drivers/gpu/drm/bridge/panel.c +++ b/drivers/gpu/drm/bridge/panel.c @@ -360,9 +360,12 @@ EXPORT_SYMBOL(drm_panel_bridge_set_orientation); static void devm_drm_panel_bridge_release(struct device *dev, void *res) { - struct drm_bridge **bridge = res; + struct drm_bridge *bridge = *(struct drm_bridge **)res; - drm_panel_bridge_remove(*bridge); + if (!bridge) + return; + + drm_bridge_remove(bridge); } /** -- cgit v1.2.3 From d029edefed39647c797c2710aedd9d31f84c069e Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 6 Jun 2024 19:13:03 +0300 Subject: net dsa: qca8k: fix usages of device_get_named_child_node() The documentation for device_get_named_child_node() mentions this important point: " The caller is responsible for calling fwnode_handle_put() on the returned fwnode pointer. " Add fwnode_handle_put() to avoid leaked references. Fixes: 1e264f9d2918 ("net: dsa: qca8k: add LEDs basic support") Reviewed-by: Simon Horman Signed-off-by: Andy Shevchenko Signed-off-by: David S. Miller --- drivers/net/dsa/qca/qca8k-leds.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dsa/qca/qca8k-leds.c b/drivers/net/dsa/qca/qca8k-leds.c index 811ebeeff4ed..43ac68052baf 100644 --- a/drivers/net/dsa/qca/qca8k-leds.c +++ b/drivers/net/dsa/qca/qca8k-leds.c @@ -431,8 +431,11 @@ qca8k_parse_port_leds(struct qca8k_priv *priv, struct fwnode_handle *port, int p init_data.devicename = kasprintf(GFP_KERNEL, "%s:0%d", priv->internal_mdio_bus->id, port_num); - if (!init_data.devicename) + if (!init_data.devicename) { + fwnode_handle_put(led); + fwnode_handle_put(leds); return -ENOMEM; + } ret = devm_led_classdev_register_ext(priv->dev, &port_led->cdev, &init_data); if (ret) @@ -441,6 +444,7 @@ qca8k_parse_port_leds(struct qca8k_priv *priv, struct fwnode_handle *port, int p kfree(init_data.devicename); } + fwnode_handle_put(leds); return 0; } @@ -471,9 +475,13 @@ qca8k_setup_led_ctrl(struct qca8k_priv *priv) * the correct port for LED setup. */ ret = qca8k_parse_port_leds(priv, port, qca8k_port_to_phy(port_num)); - if (ret) + if (ret) { + fwnode_handle_put(port); + fwnode_handle_put(ports); return ret; + } } + fwnode_handle_put(ports); return 0; } -- cgit v1.2.3 From c6ae073f5903f6c6439d0ac855836a4da5c0a701 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Thu, 6 Jun 2024 23:32:48 +0300 Subject: geneve: Fix incorrect inner network header offset when innerprotoinherit is set When innerprotoinherit is set, the tunneled packets do not have an inner Ethernet header. Change 'maclen' to not always assume the header length is ETH_HLEN, as there might not be a MAC header. This resolves issues with drivers (e.g. mlx5, in mlx5e_tx_tunnel_accel()) who rely on the skb inner network header offset to be correct, and use it for TX offloads. Fixes: d8a6213d70ac ("geneve: fix header validation in geneve[6]_xmit_skb") Signed-off-by: Gal Pressman Signed-off-by: Tariq Toukan Reviewed-by: Wojciech Drewek Signed-off-by: David S. Miller --- drivers/net/geneve.c | 10 ++++++---- include/net/ip_tunnels.h | 5 +++-- 2 files changed, 9 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index 51495cb4b9be..838e85ddec67 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -815,6 +815,7 @@ static int geneve_xmit_skb(struct sk_buff *skb, struct net_device *dev, struct geneve_dev *geneve, const struct ip_tunnel_info *info) { + bool inner_proto_inherit = geneve->cfg.inner_proto_inherit; bool xnet = !net_eq(geneve->net, dev_net(geneve->dev)); struct geneve_sock *gs4 = rcu_dereference(geneve->sock4); const struct ip_tunnel_key *key = &info->key; @@ -826,7 +827,7 @@ static int geneve_xmit_skb(struct sk_buff *skb, struct net_device *dev, __be16 sport; int err; - if (!skb_vlan_inet_prepare(skb)) + if (!skb_vlan_inet_prepare(skb, inner_proto_inherit)) return -EINVAL; if (!gs4) @@ -908,7 +909,7 @@ static int geneve_xmit_skb(struct sk_buff *skb, struct net_device *dev, } err = geneve_build_skb(&rt->dst, skb, info, xnet, sizeof(struct iphdr), - geneve->cfg.inner_proto_inherit); + inner_proto_inherit); if (unlikely(err)) return err; @@ -925,6 +926,7 @@ static int geneve6_xmit_skb(struct sk_buff *skb, struct net_device *dev, struct geneve_dev *geneve, const struct ip_tunnel_info *info) { + bool inner_proto_inherit = geneve->cfg.inner_proto_inherit; bool xnet = !net_eq(geneve->net, dev_net(geneve->dev)); struct geneve_sock *gs6 = rcu_dereference(geneve->sock6); const struct ip_tunnel_key *key = &info->key; @@ -935,7 +937,7 @@ static int geneve6_xmit_skb(struct sk_buff *skb, struct net_device *dev, __be16 sport; int err; - if (!skb_vlan_inet_prepare(skb)) + if (!skb_vlan_inet_prepare(skb, inner_proto_inherit)) return -EINVAL; if (!gs6) @@ -997,7 +999,7 @@ static int geneve6_xmit_skb(struct sk_buff *skb, struct net_device *dev, ttl = ttl ? : ip6_dst_hoplimit(dst); } err = geneve_build_skb(dst, skb, info, xnet, sizeof(struct ipv6hdr), - geneve->cfg.inner_proto_inherit); + inner_proto_inherit); if (unlikely(err)) return err; diff --git a/include/net/ip_tunnels.h b/include/net/ip_tunnels.h index 9a6a08ec7713..1db2417b8ff5 100644 --- a/include/net/ip_tunnels.h +++ b/include/net/ip_tunnels.h @@ -461,9 +461,10 @@ static inline bool pskb_inet_may_pull(struct sk_buff *skb) /* Variant of pskb_inet_may_pull(). */ -static inline bool skb_vlan_inet_prepare(struct sk_buff *skb) +static inline bool skb_vlan_inet_prepare(struct sk_buff *skb, + bool inner_proto_inherit) { - int nhlen = 0, maclen = ETH_HLEN; + int nhlen = 0, maclen = inner_proto_inherit ? 0 : ETH_HLEN; __be16 type = skb->protocol; /* Essentially this is skb_protocol(skb, true) -- cgit v1.2.3 From 791b4089e326271424b78f2fae778b20e53d071b Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Thu, 6 Jun 2024 23:32:49 +0300 Subject: net/mlx5e: Fix features validation check for tunneled UDP (non-VXLAN) packets Move the vxlan_features_check() call to after we verified the packet is a tunneled VXLAN packet. Without this, tunneled UDP non-VXLAN packets (for ex. GENENVE) might wrongly not get offloaded. In some cases, it worked by chance as GENEVE header is the same size as VXLAN, but it is obviously incorrect. Fixes: e3cfc7e6b7bd ("net/mlx5e: TX, Add geneve tunnel stateless offload support") Signed-off-by: Gal Pressman Reviewed-by: Dragos Tatulea Signed-off-by: Tariq Toukan Reviewed-by: Wojciech Drewek Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index c53c99dde558..a605eae56685 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -4875,7 +4875,7 @@ static netdev_features_t mlx5e_tunnel_features_check(struct mlx5e_priv *priv, /* Verify if UDP port is being offloaded by HW */ if (mlx5_vxlan_lookup_port(priv->mdev->vxlan, port)) - return features; + return vxlan_features_check(skb, features); #if IS_ENABLED(CONFIG_GENEVE) /* Support Geneve offload for default UDP port */ @@ -4901,7 +4901,6 @@ netdev_features_t mlx5e_features_check(struct sk_buff *skb, struct mlx5e_priv *priv = netdev_priv(netdev); features = vlan_features_check(skb, features); - features = vxlan_features_check(skb, features); /* Validate if the tunneled packet is being offloaded by HW */ if (skb->encapsulation && -- cgit v1.2.3 From 31849bf07e0fb3e7d050c086b77ebdb6cec89167 Mon Sep 17 00:00:00 2001 From: Arunpravin Paneer Selvam Date: Mon, 10 Jun 2024 23:34:01 +0530 Subject: drm/amdgpu: Fix the BO release clear memory warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This happens when the amdgpu_bo_release_notify running before amdgpu_ttm_set_buffer_funcs_status set the buffer funcs to enabled. check the buffer funcs enablement before calling the fill buffer memory. v2:(Christian) - Apply it only for GEM buffers and since GEM buffers are only allocated/freed while the driver is loaded we never run into the issue to clear with buffer funcs disabled. v3:(Mario) - drop the stable tag as this will presumably go into a -fixes PR for 6.10 Log snip: *ERROR* Trying to clear memory with ring turned off. RIP: 0010:amdgpu_bo_release_notify+0x201/0x220 [amdgpu] Fixes: a68c7eaa7a8f ("drm/amdgpu: Enable clear page functionality") Signed-off-by: Arunpravin Paneer Selvam Reviewed-by: Christian König Tested-by: Mikhail Gavrilov Tested-by: Richard Gong Suggested-by: Christian König Link: https://patchwork.freedesktop.org/patch/msgid/20240610180401.9540-1-Arunpravin.PaneerSelvam@amd.com --- drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c | 1 + drivers/gpu/drm/amd/amdgpu/amdgpu_object.c | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c index 67c234bcf89f..3adaa4670103 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c @@ -108,6 +108,7 @@ int amdgpu_gem_object_create(struct amdgpu_device *adev, unsigned long size, memset(&bp, 0, sizeof(bp)); *obj = NULL; + flags |= AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE; bp.size = size; bp.byte_align = alignment; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c index 8d8c39be6129..c556c8b653fa 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c @@ -604,8 +604,6 @@ int amdgpu_bo_create(struct amdgpu_device *adev, if (!amdgpu_bo_support_uswc(bo->flags)) bo->flags &= ~AMDGPU_GEM_CREATE_CPU_GTT_USWC; - bo->flags |= AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE; - bo->tbo.bdev = &adev->mman.bdev; if (bp->domain & (AMDGPU_GEM_DOMAIN_GWS | AMDGPU_GEM_DOMAIN_OA | AMDGPU_GEM_DOMAIN_GDS)) -- cgit v1.2.3 From b96a225377b6602299a03d2ce3c289b68cd41bb7 Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Fri, 7 Jun 2024 15:09:32 -0700 Subject: drm/nouveau: don't attempt to schedule hpd_work on headless cards If the card doesn't have display hardware, hpd_work and hpd_lock are left uninitialized which causes BUG when attempting to schedule hpd_work on runtime PM resume. Fix it by adding headless flag to DRM and skip any hpd if it's set. Fixes: ae1aadb1eb8d ("nouveau: don't fail driver load if no display hw present.") Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/337 Signed-off-by: Vasily Khoruzhick Reviewed-by: Ben Skeggs Signed-off-by: Danilo Krummrich Link: https://patchwork.freedesktop.org/patch/msgid/20240607221032.25918-1-anarsoul@gmail.com --- drivers/gpu/drm/nouveau/dispnv04/disp.c | 2 +- drivers/gpu/drm/nouveau/dispnv50/disp.c | 2 +- drivers/gpu/drm/nouveau/nouveau_display.c | 6 +++++- drivers/gpu/drm/nouveau/nouveau_drv.h | 1 + 4 files changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/dispnv04/disp.c b/drivers/gpu/drm/nouveau/dispnv04/disp.c index 13705c5f1497..4b7497a8755c 100644 --- a/drivers/gpu/drm/nouveau/dispnv04/disp.c +++ b/drivers/gpu/drm/nouveau/dispnv04/disp.c @@ -68,7 +68,7 @@ nv04_display_fini(struct drm_device *dev, bool runtime, bool suspend) if (nv_two_heads(dev)) NVWriteCRTC(dev, 1, NV_PCRTC_INTR_EN_0, 0); - if (!runtime) + if (!runtime && !drm->headless) cancel_work_sync(&drm->hpd_work); if (!suspend) diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c b/drivers/gpu/drm/nouveau/dispnv50/disp.c index 88728a0b2c25..674dc567e179 100644 --- a/drivers/gpu/drm/nouveau/dispnv50/disp.c +++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c @@ -2680,7 +2680,7 @@ nv50_display_fini(struct drm_device *dev, bool runtime, bool suspend) nv50_mstm_fini(nouveau_encoder(encoder)); } - if (!runtime) + if (!runtime && !drm->headless) cancel_work_sync(&drm->hpd_work); } diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index aed5d5b51b43..d4725a968827 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -450,6 +450,9 @@ nouveau_display_hpd_resume(struct drm_device *dev) { struct nouveau_drm *drm = nouveau_drm(dev); + if (drm->headless) + return; + spin_lock_irq(&drm->hpd_lock); drm->hpd_pending = ~0; spin_unlock_irq(&drm->hpd_lock); @@ -635,7 +638,7 @@ nouveau_display_fini(struct drm_device *dev, bool suspend, bool runtime) } drm_connector_list_iter_end(&conn_iter); - if (!runtime) + if (!runtime && !drm->headless) cancel_work_sync(&drm->hpd_work); drm_kms_helper_poll_disable(dev); @@ -729,6 +732,7 @@ nouveau_display_create(struct drm_device *dev) /* no display hw */ if (ret == -ENODEV) { ret = 0; + drm->headless = true; goto disp_create_err; } diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index e239c6bf4afa..25fca98a20bc 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -276,6 +276,7 @@ struct nouveau_drm { /* modesetting */ struct nvbios vbios; struct nouveau_display *display; + bool headless; struct work_struct hpd_work; spinlock_t hpd_lock; u32 hpd_pending; -- cgit v1.2.3 From b6846826982b9f2f2ad0e79540521b517469ee92 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 11 Jun 2024 16:51:23 +0200 Subject: thermal: gov_step_wise: Restore passive polling management Consider a thermal zone with one passive trip point, a cooling device with 3 states (0, 1, 2) bound to it, passive polling enabled (nonzero passive_delay_jiffies) and no regular polling (polling_delay_jiffies equal to 0) that is managed by the Step-Wise governor. Suppose that the initial state of the cooling device is 0 and the zone temperature is below the trip point to start with. When the trip point is crossed, tz->passive is incremented by the thermal core and the governor's .manage() callback is invoked. It sets 'throttle' to 'true' for the trip in question and get_target_state() returns 1 for the instance corresponding to the cooling device (say that 'upper' and 'lower' are set to 2 and 0 for it, respectively), so its state changes to 1. Passive polling is still active for the zone, so next time the temperature is updated, the governor's .manage() callback will be invoked again. If the temperature is still rising, it will change the state of the cooling device to 2. Now suppose that next time the zone temperature is updated, it falls below the trip point, so tz->passive is decremented for the zone (say it becomes 0 then) and the governor's .manage() callbacks runs. It finds that the temperature trend for the zone is 'falling' and 'throttle' will be set to 'false' for the trip in question, so the cooling device's state will be changed to 1. However, because tz->polling is 0 for the zone, the governor's .manage() callback may not be invoked again for a long time and the cooling device's state will not be reset back to 0. This can happen because commit 042a3d80f118 ("thermal: core: Move passive polling management to the core") removed passive polling management from the Step-Wise governor. Before that change, thermal_zone_trip_update() would bump up tz->passive when changing the target state for a thermal instance from "no target" to a specific value and it would drop tz->passive when changing it back to "no target" which would cause passive polling to be active for the zone until the governor has reset the states of all cooling devices. In particular, in the example above tz->passive would be incremented when changing the state of the cooling device from 0 to 1 and then it would be still nonzero when the state of the cooling device was changed from 2 to 1. To prevent this problem from occurring, restore the passive polling management in the Step-Wise governor by partially reverting the commit in question and update the comment in the restored code to explain its role more clearly. Fixes: 042a3d80f118 ("thermal: core: Move passive polling management to the core") Closes: https://lore.kernel.org/linux-pm/ZmVfcEOxmjUHZTSX@hovoldconsulting.com Reported-by: Johan Hovold Tested-by: Johan Hovold Signed-off-by: Rafael J. Wysocki --- drivers/thermal/gov_step_wise.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'drivers') diff --git a/drivers/thermal/gov_step_wise.c b/drivers/thermal/gov_step_wise.c index e0fdc497bfcc..65974fe8be0d 100644 --- a/drivers/thermal/gov_step_wise.c +++ b/drivers/thermal/gov_step_wise.c @@ -93,6 +93,23 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, if (instance->initialized && old_target == instance->target) continue; + if (trip->type == THERMAL_TRIP_PASSIVE) { + /* + * If the target state for this thermal instance + * changes from THERMAL_NO_TARGET to something else, + * ensure that the zone temperature will be updated + * (assuming enabled passive cooling) until it becomes + * THERMAL_NO_TARGET again, or the cooling device may + * not be reset to its initial state. + */ + if (old_target == THERMAL_NO_TARGET && + instance->target != THERMAL_NO_TARGET) + tz->passive++; + else if (old_target != THERMAL_NO_TARGET && + instance->target == THERMAL_NO_TARGET) + tz->passive--; + } + instance->initialized = true; mutex_lock(&instance->cdev->lock); -- cgit v1.2.3 From 017ed5e70c88bf2f1e0952bab6f53a53a028e561 Mon Sep 17 00:00:00 2001 From: "Dr. David Alan Gilbert" Date: Sat, 18 May 2024 00:26:17 +0100 Subject: drm/nouveau: remove unused struct 'init_exec' 'init_exec' is unused since commit cb75d97e9c77 ("drm/nouveau: implement devinit subdev, and new init table parser") Remove it. Signed-off-by: Dr. David Alan Gilbert Acked-by: Danilo Krummrich Signed-off-by: Danilo Krummrich Link: https://patchwork.freedesktop.org/patch/msgid/20240517232617.230767-1-linux@treblig.org --- drivers/gpu/drm/nouveau/nouveau_bios.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index 79cfab53f80e..8c3c1f1e01c5 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -43,11 +43,6 @@ #define BIOSLOG(sip, fmt, arg...) NV_DEBUG(sip->dev, fmt, ##arg) #define LOG_OLD_VALUE(x) -struct init_exec { - bool execute; - bool repeat; -}; - static bool nv_cksum(const uint8_t *data, unsigned int length) { /* -- cgit v1.2.3 From 52912ca87e2b810e5acdcdc452593d30c9187d8f Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Fri, 7 Jun 2024 10:25:07 +0900 Subject: scsi: core: Disable CDL by default For SCSI devices supporting the Command Duration Limits feature set, the user can enable/disable this feature use through the sysfs device attribute "cdl_enable". This attribute modification triggers a call to scsi_cdl_enable() to enable and disable the feature for ATA devices and set the scsi device cdl_enable field to the user provided bool value. For SCSI devices supporting CDL, the feature set is always enabled and scsi_cdl_enable() is reduced to setting the cdl_enable field. However, for ATA devices, a drive may spin-up with the CDL feature enabled by default. But the SCSI device cdl_enable field is always initialized to false (CDL disabled), regardless of the actual device CDL feature state. For ATA devices managed by libata (or libsas), libata-core always disables the CDL feature set when the device is attached, thus syncing the state of the CDL feature on the device and of the SCSI device cdl_enable field. However, for ATA devices connected to a SAS HBA, the CDL feature is not disabled on scan for ATA devices that have this feature enabled by default, leading to an inconsistent state of the feature on the device with the SCSI device cdl_enable field. Avoid this inconsistency by adding a call to scsi_cdl_enable() in scsi_cdl_check() to make sure that the device-side state of the CDL feature set always matches the scsi device cdl_enable field state. This implies that CDL will always be disabled for ATA devices connected to SAS HBAs, which is consistent with libata/libsas initialization of the device. Reported-by: Scott McCoy Fixes: 1b22cfb14142 ("scsi: core: Allow enabling and disabling command duration limits") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Link: https://lore.kernel.org/r/20240607012507.111488-1-dlemoal@kernel.org Reviewed-by: Niklas Cassel Reviewed-by: Igor Pylypiv Reviewed-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index f0464db3f9de..ee69bd35889d 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -673,6 +673,13 @@ void scsi_cdl_check(struct scsi_device *sdev) sdev->use_10_for_rw = 0; sdev->cdl_supported = 1; + + /* + * If the device supports CDL, make sure that the current drive + * feature status is consistent with the user controlled + * cdl_enable state. + */ + scsi_cdl_enable(sdev, sdev->cdl_enable); } else { sdev->cdl_supported = 0; } -- cgit v1.2.3 From 77691af484e28af7a692e511b9ed5ca63012ec6e Mon Sep 17 00:00:00 2001 From: Ziqi Chen Date: Fri, 7 Jun 2024 18:06:23 +0800 Subject: scsi: ufs: core: Quiesce request queues before checking pending cmds In ufshcd_clock_scaling_prepare(), after SCSI layer is blocked, ufshcd_pending_cmds() is called to check whether there are pending transactions or not. And only if there are no pending transactions can we proceed to kickstart the clock scaling sequence. ufshcd_pending_cmds() traverses over all SCSI devices and calls sbitmap_weight() on their budget_map. sbitmap_weight() can be broken down to three steps: 1. Calculate the nr outstanding bits set in the 'word' bitmap. 2. Calculate the nr outstanding bits set in the 'cleared' bitmap. 3. Subtract the result from step 1 by the result from step 2. This can lead to a race condition as outlined below: Assume there is one pending transaction in the request queue of one SCSI device, say sda, and the budget token of this request is 0, the 'word' is 0x1 and the 'cleared' is 0x0. 1. When step 1 executes, it gets the result as 1. 2. Before step 2 executes, block layer tries to dispatch a new request to sda. Since the SCSI layer is blocked, the request cannot pass through SCSI but the block layer would do budget_get() and budget_put() to sda's budget map regardless, so the 'word' has become 0x3 and 'cleared' has become 0x2 (assume the new request got budget token 1). 3. When step 2 executes, it gets the result as 1. 4. When step 3 executes, it gets the result as 0, meaning there is no pending transactions, which is wrong. Thread A Thread B ufshcd_pending_cmds() __blk_mq_sched_dispatch_requests() | | sbitmap_weight(word) | | scsi_mq_get_budget() | | | scsi_mq_put_budget() | | sbitmap_weight(cleared) ... When this race condition happens, the clock scaling sequence is started with transactions still in flight, leading to subsequent hibernate enter failure, broken link, task abort and back to back error recovery. Fix this race condition by quiescing the request queues before calling ufshcd_pending_cmds() so that block layer won't touch the budget map when ufshcd_pending_cmds() is working on it. In addition, remove the SCSI layer blocking/unblocking to reduce redundancies and latencies. Fixes: 8d077ede48c1 ("scsi: ufs: Optimize the command queueing code") Co-developed-by: Can Guo Signed-off-by: Can Guo Signed-off-by: Ziqi Chen Link: https://lore.kernel.org/r/1717754818-39863-1-git-send-email-quic_ziqichen@quicinc.com Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/ufs/core/ufshcd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index 0cf07194bbe8..e5e9da61f15d 100644 --- a/drivers/ufs/core/ufshcd.c +++ b/drivers/ufs/core/ufshcd.c @@ -1366,7 +1366,7 @@ static int ufshcd_clock_scaling_prepare(struct ufs_hba *hba, u64 timeout_us) * make sure that there are no outstanding requests when * clock scaling is in progress */ - ufshcd_scsi_block_requests(hba); + blk_mq_quiesce_tagset(&hba->host->tag_set); mutex_lock(&hba->wb_mutex); down_write(&hba->clk_scaling_lock); @@ -1375,7 +1375,7 @@ static int ufshcd_clock_scaling_prepare(struct ufs_hba *hba, u64 timeout_us) ret = -EBUSY; up_write(&hba->clk_scaling_lock); mutex_unlock(&hba->wb_mutex); - ufshcd_scsi_unblock_requests(hba); + blk_mq_unquiesce_tagset(&hba->host->tag_set); goto out; } @@ -1396,7 +1396,7 @@ static void ufshcd_clock_scaling_unprepare(struct ufs_hba *hba, int err, bool sc mutex_unlock(&hba->wb_mutex); - ufshcd_scsi_unblock_requests(hba); + blk_mq_unquiesce_tagset(&hba->host->tag_set); ufshcd_release(hba); } -- cgit v1.2.3 From 90e6f08915ec6efe46570420412a65050ec826b2 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Tue, 11 Jun 2024 17:34:35 +0900 Subject: scsi: mpi3mr: Fix ATA NCQ priority support The function mpi3mr_qcmd() of the mpi3mr driver is able to indicate to the HBA if a read or write command directed at an ATA device should be translated to an NCQ read/write command with the high prioiryt bit set when the request uses the RT priority class and the user has enabled NCQ priority through sysfs. However, unlike the mpt3sas driver, the mpi3mr driver does not define the sas_ncq_prio_supported and sas_ncq_prio_enable sysfs attributes, so the ncq_prio_enable field of struct mpi3mr_sdev_priv_data is never actually set and NCQ Priority cannot ever be used. Fix this by defining these missing atributes to allow a user to check if an ATA device supports NCQ priority and to enable/disable the use of NCQ priority. To do this, lift the function scsih_ncq_prio_supp() out of the mpt3sas driver and make it the generic SCSI SAS transport function sas_ata_ncq_prio_supported(). Nothing in that function is hardware specific, so this function can be used in both the mpt3sas driver and the mpi3mr driver. Reported-by: Scott McCoy Fixes: 023ab2a9b4ed ("scsi: mpi3mr: Add support for queue command processing") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Link: https://lore.kernel.org/r/20240611083435.92961-1-dlemoal@kernel.org Reviewed-by: Niklas Cassel Signed-off-by: Martin K. Petersen --- drivers/scsi/mpi3mr/mpi3mr_app.c | 62 ++++++++++++++++++++++++++++++++++++ drivers/scsi/mpt3sas/mpt3sas_base.h | 3 -- drivers/scsi/mpt3sas/mpt3sas_ctl.c | 4 +-- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 23 ------------- drivers/scsi/scsi_transport_sas.c | 23 +++++++++++++ include/scsi/scsi_transport_sas.h | 2 ++ 6 files changed, 89 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/mpi3mr/mpi3mr_app.c b/drivers/scsi/mpi3mr/mpi3mr_app.c index 1638109a68a0..cd261b48eb46 100644 --- a/drivers/scsi/mpi3mr/mpi3mr_app.c +++ b/drivers/scsi/mpi3mr/mpi3mr_app.c @@ -2163,10 +2163,72 @@ persistent_id_show(struct device *dev, struct device_attribute *attr, } static DEVICE_ATTR_RO(persistent_id); +/** + * sas_ncq_prio_supported_show - Indicate if device supports NCQ priority + * @dev: pointer to embedded device + * @attr: sas_ncq_prio_supported attribute descriptor + * @buf: the buffer returned + * + * A sysfs 'read-only' sdev attribute, only works with SATA devices + */ +static ssize_t +sas_ncq_prio_supported_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct scsi_device *sdev = to_scsi_device(dev); + + return sysfs_emit(buf, "%d\n", sas_ata_ncq_prio_supported(sdev)); +} +static DEVICE_ATTR_RO(sas_ncq_prio_supported); + +/** + * sas_ncq_prio_enable_show - send prioritized io commands to device + * @dev: pointer to embedded device + * @attr: sas_ncq_prio_enable attribute descriptor + * @buf: the buffer returned + * + * A sysfs 'read/write' sdev attribute, only works with SATA devices + */ +static ssize_t +sas_ncq_prio_enable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct mpi3mr_sdev_priv_data *sdev_priv_data = sdev->hostdata; + + if (!sdev_priv_data) + return 0; + + return sysfs_emit(buf, "%d\n", sdev_priv_data->ncq_prio_enable); +} + +static ssize_t +sas_ncq_prio_enable_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct mpi3mr_sdev_priv_data *sdev_priv_data = sdev->hostdata; + bool ncq_prio_enable = 0; + + if (kstrtobool(buf, &ncq_prio_enable)) + return -EINVAL; + + if (!sas_ata_ncq_prio_supported(sdev)) + return -EINVAL; + + sdev_priv_data->ncq_prio_enable = ncq_prio_enable; + + return strlen(buf); +} +static DEVICE_ATTR_RW(sas_ncq_prio_enable); + static struct attribute *mpi3mr_dev_attrs[] = { &dev_attr_sas_address.attr, &dev_attr_device_handle.attr, &dev_attr_persistent_id.attr, + &dev_attr_sas_ncq_prio_supported.attr, + &dev_attr_sas_ncq_prio_enable.attr, NULL, }; diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index bf100a4ebfc3..fe1e96fda284 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -2048,9 +2048,6 @@ void mpt3sas_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, struct _raid_device *raid_device, Mpi25SCSIIORequest_t *mpi_request); -/* NCQ Prio Handling Check */ -bool scsih_ncq_prio_supp(struct scsi_device *sdev); - void mpt3sas_setup_debugfs(struct MPT3SAS_ADAPTER *ioc); void mpt3sas_destroy_debugfs(struct MPT3SAS_ADAPTER *ioc); void mpt3sas_init_debugfs(void); diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c index 1c9fd26195b8..87784c96249a 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c @@ -4088,7 +4088,7 @@ sas_ncq_prio_supported_show(struct device *dev, { struct scsi_device *sdev = to_scsi_device(dev); - return sysfs_emit(buf, "%d\n", scsih_ncq_prio_supp(sdev)); + return sysfs_emit(buf, "%d\n", sas_ata_ncq_prio_supported(sdev)); } static DEVICE_ATTR_RO(sas_ncq_prio_supported); @@ -4123,7 +4123,7 @@ sas_ncq_prio_enable_store(struct device *dev, if (kstrtobool(buf, &ncq_prio_enable)) return -EINVAL; - if (!scsih_ncq_prio_supp(sdev)) + if (!sas_ata_ncq_prio_supported(sdev)) return -EINVAL; sas_device_priv_data->ncq_prio_enable = ncq_prio_enable; diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 12d08d8ba538..870ec2cb4af4 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -12571,29 +12571,6 @@ scsih_pci_mmio_enabled(struct pci_dev *pdev) return PCI_ERS_RESULT_RECOVERED; } -/** - * scsih_ncq_prio_supp - Check for NCQ command priority support - * @sdev: scsi device struct - * - * This is called when a user indicates they would like to enable - * ncq command priorities. This works only on SATA devices. - */ -bool scsih_ncq_prio_supp(struct scsi_device *sdev) -{ - struct scsi_vpd *vpd; - bool ncq_prio_supp = false; - - rcu_read_lock(); - vpd = rcu_dereference(sdev->vpd_pg89); - if (!vpd || vpd->len < 214) - goto out; - - ncq_prio_supp = (vpd->data[213] >> 4) & 1; -out: - rcu_read_unlock(); - - return ncq_prio_supp; -} /* * The pci device ids are defined in mpi/mpi2_cnfg.h. */ diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index 424a89513814..4e33f1661e4c 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -416,6 +416,29 @@ unsigned int sas_is_tlr_enabled(struct scsi_device *sdev) } EXPORT_SYMBOL_GPL(sas_is_tlr_enabled); +/** + * sas_ata_ncq_prio_supported - Check for ATA NCQ command priority support + * @sdev: SCSI device + * + * Check if an ATA device supports NCQ priority using VPD page 89h (ATA + * Information). Since this VPD page is implemented only for ATA devices, + * this function always returns false for SCSI devices. + */ +bool sas_ata_ncq_prio_supported(struct scsi_device *sdev) +{ + struct scsi_vpd *vpd; + bool ncq_prio_supported = false; + + rcu_read_lock(); + vpd = rcu_dereference(sdev->vpd_pg89); + if (vpd && vpd->len >= 214) + ncq_prio_supported = (vpd->data[213] >> 4) & 1; + rcu_read_unlock(); + + return ncq_prio_supported; +} +EXPORT_SYMBOL_GPL(sas_ata_ncq_prio_supported); + /* * SAS Phy attributes */ diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h index 0e75b9277c8c..e3b6ce3cbf88 100644 --- a/include/scsi/scsi_transport_sas.h +++ b/include/scsi/scsi_transport_sas.h @@ -200,6 +200,8 @@ unsigned int sas_is_tlr_enabled(struct scsi_device *); void sas_disable_tlr(struct scsi_device *); void sas_enable_tlr(struct scsi_device *); +bool sas_ata_ncq_prio_supported(struct scsi_device *sdev); + extern struct sas_rphy *sas_end_device_alloc(struct sas_port *); extern struct sas_rphy *sas_expander_alloc(struct sas_port *, enum sas_device_type); void sas_rphy_free(struct sas_rphy *); -- cgit v1.2.3 From 1b9f756344416e02b41439bf2324b26aa25e141c Mon Sep 17 00:00:00 2001 From: Joshua Washington Date: Mon, 10 Jun 2024 15:57:18 -0700 Subject: gve: ignore nonrelevant GSO type bits when processing TSO headers TSO currently fails when the skb's gso_type field has more than one bit set. TSO packets can be passed from userspace using PF_PACKET, TUNTAP and a few others, using virtio_net_hdr (e.g., PACKET_VNET_HDR). This includes virtualization, such as QEMU, a real use-case. The gso_type and gso_size fields as passed from userspace in virtio_net_hdr are not trusted blindly by the kernel. It adds gso_type |= SKB_GSO_DODGY to force the packet to enter the software GSO stack for verification. This issue might similarly come up when the CWR bit is set in the TCP header for congestion control, causing the SKB_GSO_TCP_ECN gso_type bit to be set. Fixes: a57e5de476be ("gve: DQO: Add TX path") Signed-off-by: Joshua Washington Reviewed-by: Praveen Kaligineedi Reviewed-by: Harshitha Ramamurthy Reviewed-by: Willem de Bruijn Suggested-by: Eric Dumazet Acked-by: Andrei Vagin v2 - Remove unnecessary comments, remove line break between fixes tag and signoffs. v3 - Add back unrelated empty line removal. Link: https://lore.kernel.org/r/20240610225729.2985343-1-joshwash@google.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/google/gve/gve_tx_dqo.c | 20 +++++--------------- 1 file changed, 5 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/google/gve/gve_tx_dqo.c b/drivers/net/ethernet/google/gve/gve_tx_dqo.c index fe1b26a4d736..0b3cca3fc792 100644 --- a/drivers/net/ethernet/google/gve/gve_tx_dqo.c +++ b/drivers/net/ethernet/google/gve/gve_tx_dqo.c @@ -555,28 +555,18 @@ static int gve_prep_tso(struct sk_buff *skb) if (unlikely(skb_shinfo(skb)->gso_size < GVE_TX_MIN_TSO_MSS_DQO)) return -1; + if (!(skb_shinfo(skb)->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6))) + return -EINVAL; + /* Needed because we will modify header. */ err = skb_cow_head(skb, 0); if (err < 0) return err; tcp = tcp_hdr(skb); - - /* Remove payload length from checksum. */ paylen = skb->len - skb_transport_offset(skb); - - switch (skb_shinfo(skb)->gso_type) { - case SKB_GSO_TCPV4: - case SKB_GSO_TCPV6: - csum_replace_by_diff(&tcp->check, - (__force __wsum)htonl(paylen)); - - /* Compute length of segmentation header. */ - header_len = skb_tcp_all_headers(skb); - break; - default: - return -EINVAL; - } + csum_replace_by_diff(&tcp->check, (__force __wsum)htonl(paylen)); + header_len = skb_tcp_all_headers(skb); if (unlikely(header_len > GVE_TX_MAX_HDR_SIZE_DQO)) return -EINVAL; -- cgit v1.2.3 From be27b896529787e23a35ae4befb6337ce73fcca0 Mon Sep 17 00:00:00 2001 From: Xiaolei Wang Date: Sat, 8 Jun 2024 22:35:24 +0800 Subject: net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters The current cbs parameter depends on speed after uplinking, which is not needed and will report a configuration error if the port is not initially connected. The UAPI exposed by tc-cbs requires userspace to recalculate the send slope anyway, because the formula depends on port_transmit_rate (see man tc-cbs), which is not an invariant from tc's perspective. Therefore, we use offload->sendslope and offload->idleslope to derive the original port_transmit_rate from the CBS formula. Fixes: 1f705bc61aee ("net: stmmac: Add support for CBS QDISC") Signed-off-by: Xiaolei Wang Reviewed-by: Wojciech Drewek Reviewed-by: Vladimir Oltean Link: https://lore.kernel.org/r/20240608143524.2065736-1-xiaolei.wang@windriver.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 25 +++++++++++-------------- 1 file changed, 11 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c index 222540b55480..1562fbdd0a04 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c @@ -343,10 +343,11 @@ static int tc_setup_cbs(struct stmmac_priv *priv, struct tc_cbs_qopt_offload *qopt) { u32 tx_queues_count = priv->plat->tx_queues_to_use; + s64 port_transmit_rate_kbps; u32 queue = qopt->queue; - u32 ptr, speed_div; u32 mode_to_use; u64 value; + u32 ptr; int ret; /* Queue 0 is not AVB capable */ @@ -355,30 +356,26 @@ static int tc_setup_cbs(struct stmmac_priv *priv, if (!priv->dma_cap.av) return -EOPNOTSUPP; + port_transmit_rate_kbps = qopt->idleslope - qopt->sendslope; + /* Port Transmit Rate and Speed Divider */ - switch (priv->speed) { + switch (div_s64(port_transmit_rate_kbps, 1000)) { case SPEED_10000: - ptr = 32; - speed_div = 10000000; - break; case SPEED_5000: ptr = 32; - speed_div = 5000000; break; case SPEED_2500: - ptr = 8; - speed_div = 2500000; - break; case SPEED_1000: ptr = 8; - speed_div = 1000000; break; case SPEED_100: ptr = 4; - speed_div = 100000; break; default: - return -EOPNOTSUPP; + netdev_err(priv->dev, + "Invalid portTransmitRate %lld (idleSlope - sendSlope)\n", + port_transmit_rate_kbps); + return -EINVAL; } mode_to_use = priv->plat->tx_queues_cfg[queue].mode_to_use; @@ -398,10 +395,10 @@ static int tc_setup_cbs(struct stmmac_priv *priv, } /* Final adjustments for HW */ - value = div_s64(qopt->idleslope * 1024ll * ptr, speed_div); + value = div_s64(qopt->idleslope * 1024ll * ptr, port_transmit_rate_kbps); priv->plat->tx_queues_cfg[queue].idle_slope = value & GENMASK(31, 0); - value = div_s64(-qopt->sendslope * 1024ll * ptr, speed_div); + value = div_s64(-qopt->sendslope * 1024ll * ptr, port_transmit_rate_kbps); priv->plat->tx_queues_cfg[queue].send_slope = value & GENMASK(31, 0); value = qopt->hicredit * 1024ll * 8; -- cgit v1.2.3 From f0260589b439e2637ad54a2b25f00a516ef28a57 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Tue, 11 Jun 2024 15:06:07 +0300 Subject: xhci: Set correct transferred length for cancelled bulk transfers The transferred length is set incorrectly for cancelled bulk transfer TDs in case the bulk transfer ring stops on the last transfer block with a 'Stop - Length Invalid' completion code. length essentially ends up being set to the requested length: urb->actual_length = urb->transfer_buffer_length Length for 'Stop - Length Invalid' cases should be the sum of all TRB transfer block lengths up to the one the ring stopped on, _excluding_ the one stopped on. Fix this by always summing up TRB lengths for 'Stop - Length Invalid' bulk cases. This issue was discovered by Alan Stern while debugging https://bugzilla.kernel.org/show_bug.cgi?id=218890, but does not solve that bug. Issue is older than 4.10 kernel but fix won't apply to those due to major reworks in that area. Tested-by: Pierre Tomon Cc: stable@vger.kernel.org # v4.10+ Cc: Alan Stern Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20240611120610.3264502-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 9e90d2952760..1db61bb2b9b5 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2524,9 +2524,8 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep, goto finish_td; case COMP_STOPPED_LENGTH_INVALID: /* stopped on ep trb with invalid length, exclude it */ - ep_trb_len = 0; - remaining = 0; - break; + td->urb->actual_length = sum_trb_lengths(xhci, ep_ring, ep_trb); + goto finish_td; case COMP_USB_TRANSACTION_ERROR: if (xhci->quirks & XHCI_NO_SOFT_RETRY || (ep->err_count++ > MAX_SOFT_RETRY) || -- cgit v1.2.3 From 17bd54555c2aaecfdb38e2734149f684a73fa584 Mon Sep 17 00:00:00 2001 From: Kuangyi Chiang Date: Tue, 11 Jun 2024 15:06:08 +0300 Subject: xhci: Apply reset resume quirk to Etron EJ188 xHCI host As described in commit c877b3b2ad5c ("xhci: Add reset on resume quirk for asrock p67 host"), EJ188 have the same issue as EJ168, where completely dies on resume. So apply XHCI_RESET_ON_RESUME quirk to EJ188 as well. Cc: stable@vger.kernel.org Signed-off-by: Kuangyi Chiang Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20240611120610.3264502-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index c040d816e626..dd8256e4e02a 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -36,6 +36,7 @@ #define PCI_VENDOR_ID_ETRON 0x1b6f #define PCI_DEVICE_ID_EJ168 0x7023 +#define PCI_DEVICE_ID_EJ188 0x7052 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI 0x8c31 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31 @@ -395,6 +396,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_RESET_ON_RESUME; xhci->quirks |= XHCI_BROKEN_STREAMS; } + if (pdev->vendor == PCI_VENDOR_ID_ETRON && + pdev->device == PCI_DEVICE_ID_EJ188) + xhci->quirks |= XHCI_RESET_ON_RESUME; + if (pdev->vendor == PCI_VENDOR_ID_RENESAS && pdev->device == 0x0014) { xhci->quirks |= XHCI_ZERO_64B_REGS; -- cgit v1.2.3 From 91f7a1524a92c70ffe264db8bdfa075f15bbbeb9 Mon Sep 17 00:00:00 2001 From: Kuangyi Chiang Date: Tue, 11 Jun 2024 15:06:09 +0300 Subject: xhci: Apply broken streams quirk to Etron EJ188 xHCI host As described in commit 8f873c1ff4ca ("xhci: Blacklist using streams on the Etron EJ168 controller"), EJ188 have the same issue as EJ168, where Streams do not work reliable on EJ188. So apply XHCI_BROKEN_STREAMS quirk to EJ188 as well. Cc: stable@vger.kernel.org Signed-off-by: Kuangyi Chiang Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20240611120610.3264502-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index dd8256e4e02a..05881153883e 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -397,8 +397,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_BROKEN_STREAMS; } if (pdev->vendor == PCI_VENDOR_ID_ETRON && - pdev->device == PCI_DEVICE_ID_EJ188) + pdev->device == PCI_DEVICE_ID_EJ188) { xhci->quirks |= XHCI_RESET_ON_RESUME; + xhci->quirks |= XHCI_BROKEN_STREAMS; + } if (pdev->vendor == PCI_VENDOR_ID_RENESAS && pdev->device == 0x0014) { -- cgit v1.2.3 From 5ceac4402f5d975e5a01c806438eb4e554771577 Mon Sep 17 00:00:00 2001 From: Hector Martin Date: Tue, 11 Jun 2024 15:06:10 +0300 Subject: xhci: Handle TD clearing for multiple streams case When multiple streams are in use, multiple TDs might be in flight when an endpoint is stopped. We need to issue a Set TR Dequeue Pointer for each, to ensure everything is reset properly and the caches cleared. Change the logic so that any N>1 TDs found active for different streams are deferred until after the first one is processed, calling xhci_invalidate_cancelled_tds() again from xhci_handle_cmd_set_deq() to queue another command until we are done with all of them. Also change the error/"should never happen" paths to ensure we at least clear any affected TDs, even if we can't issue a command to clear the hardware cache, and complain loudly with an xhci_warn() if this ever happens. This problem case dates back to commit e9df17eb1408 ("USB: xhci: Correct assumptions about number of rings per endpoint.") early on in the XHCI driver's life, when stream support was first added. It was then identified but not fixed nor made into a warning in commit 674f8438c121 ("xhci: split handling halted endpoints into two steps"), which added a FIXME comment for the problem case (without materially changing the behavior as far as I can tell, though the new logic made the problem more obvious). Then later, in commit 94f339147fc3 ("xhci: Fix failure to give back some cached cancelled URBs."), it was acknowledged again. [Mathias: commit 94f339147fc3 ("xhci: Fix failure to give back some cached cancelled URBs.") was a targeted regression fix to the previously mentioned patch. Users reported issues with usb stuck after unmounting/disconnecting UAS devices. This rolled back the TD clearing of multiple streams to its original state.] Apparently the commit author was aware of the problem (yet still chose to submit it): It was still mentioned as a FIXME, an xhci_dbg() was added to log the problem condition, and the remaining issue was mentioned in the commit description. The choice of making the log type xhci_dbg() for what is, at this point, a completely unhandled and known broken condition is puzzling and unfortunate, as it guarantees that no actual users would see the log in production, thereby making it nigh undebuggable (indeed, even if you turn on DEBUG, the message doesn't really hint at there being a problem at all). It took me *months* of random xHC crashes to finally find a reliable repro and be able to do a deep dive debug session, which could all have been avoided had this unhandled, broken condition been actually reported with a warning, as it should have been as a bug intentionally left in unfixed (never mind that it shouldn't have been left in at all). > Another fix to solve clearing the caches of all stream rings with > cancelled TDs is needed, but not as urgent. 3 years after that statement and 14 years after the original bug was introduced, I think it's finally time to fix it. And maybe next time let's not leave bugs unfixed (that are actually worse than the original bug), and let's actually get people to review kernel commits please. Fixes xHC crashes and IOMMU faults with UAS devices when handling errors/faults. Easiest repro is to use `hdparm` to mark an early sector (e.g. 1024) on a disk as bad, then `cat /dev/sdX > /dev/null` in a loop. At least in the case of JMicron controllers, the read errors end up having to cancel two TDs (for two queued requests to different streams) and the one that didn't get cleared properly ends up faulting the xHC entirely when it tries to access DMA pages that have since been unmapped, referred to by the stale TDs. This normally happens quickly (after two or three loops). After this fix, I left the `cat` in a loop running overnight and experienced no xHC failures, with all read errors recovered properly. Repro'd and tested on an Apple M1 Mac Mini (dwc3 host). On systems without an IOMMU, this bug would instead silently corrupt freed memory, making this a security bug (even on systems with IOMMUs this could silently corrupt memory belonging to other USB devices on the same controller, so it's still a security bug). Given that the kernel autoprobes partition tables, I'm pretty sure a malicious USB device pretending to be a UAS device and reporting an error with the right timing could deliberately trigger a UAF and write to freed memory, with no user action. [Mathias: Commit message and code comment edit, original at:] https://lore.kernel.org/linux-usb/20240524-xhci-streams-v1-1-6b1f13819bea@marcan.st/ Fixes: e9df17eb1408 ("USB: xhci: Correct assumptions about number of rings per endpoint.") Fixes: 94f339147fc3 ("xhci: Fix failure to give back some cached cancelled URBs.") Fixes: 674f8438c121 ("xhci: split handling halted endpoints into two steps") Cc: stable@vger.kernel.org Cc: security@kernel.org Reviewed-by: Neal Gompa Signed-off-by: Hector Martin Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20240611120610.3264502-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 54 +++++++++++++++++++++++++++++++++++--------- drivers/usb/host/xhci.h | 1 + 2 files changed, 44 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 1db61bb2b9b5..fd0cde3d1569 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1031,13 +1031,27 @@ static int xhci_invalidate_cancelled_tds(struct xhci_virt_ep *ep) break; case TD_DIRTY: /* TD is cached, clear it */ case TD_HALTED: + case TD_CLEARING_CACHE_DEFERRED: + if (cached_td) { + if (cached_td->urb->stream_id != td->urb->stream_id) { + /* Multiple streams case, defer move dq */ + xhci_dbg(xhci, + "Move dq deferred: stream %u URB %p\n", + td->urb->stream_id, td->urb); + td->cancel_status = TD_CLEARING_CACHE_DEFERRED; + break; + } + + /* Should never happen, but clear the TD if it does */ + xhci_warn(xhci, + "Found multiple active URBs %p and %p in stream %u?\n", + td->urb, cached_td->urb, + td->urb->stream_id); + td_to_noop(xhci, ring, cached_td, false); + cached_td->cancel_status = TD_CLEARED; + } + td->cancel_status = TD_CLEARING_CACHE; - if (cached_td) - /* FIXME stream case, several stopped rings */ - xhci_dbg(xhci, - "Move dq past stream %u URB %p instead of stream %u URB %p\n", - td->urb->stream_id, td->urb, - cached_td->urb->stream_id, cached_td->urb); cached_td = td; break; } @@ -1057,10 +1071,16 @@ static int xhci_invalidate_cancelled_tds(struct xhci_virt_ep *ep) if (err) { /* Failed to move past cached td, just set cached TDs to no-op */ list_for_each_entry_safe(td, tmp_td, &ep->cancelled_td_list, cancelled_td_list) { - if (td->cancel_status != TD_CLEARING_CACHE) + /* + * Deferred TDs need to have the deq pointer set after the above command + * completes, so if that failed we just give up on all of them (and + * complain loudly since this could cause issues due to caching). + */ + if (td->cancel_status != TD_CLEARING_CACHE && + td->cancel_status != TD_CLEARING_CACHE_DEFERRED) continue; - xhci_dbg(xhci, "Failed to clear cancelled cached URB %p, mark clear anyway\n", - td->urb); + xhci_warn(xhci, "Failed to clear cancelled cached URB %p, mark clear anyway\n", + td->urb); td_to_noop(xhci, ring, td, false); td->cancel_status = TD_CLEARED; } @@ -1346,6 +1366,7 @@ static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id, struct xhci_ep_ctx *ep_ctx; struct xhci_slot_ctx *slot_ctx; struct xhci_td *td, *tmp_td; + bool deferred = false; ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3])); stream_id = TRB_TO_STREAM_ID(le32_to_cpu(trb->generic.field[2])); @@ -1432,6 +1453,8 @@ static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id, xhci_dbg(ep->xhci, "%s: Giveback cancelled URB %p TD\n", __func__, td->urb); xhci_td_cleanup(ep->xhci, td, ep_ring, td->status); + } else if (td->cancel_status == TD_CLEARING_CACHE_DEFERRED) { + deferred = true; } else { xhci_dbg(ep->xhci, "%s: Keep cancelled URB %p TD as cancel_status is %d\n", __func__, td->urb, td->cancel_status); @@ -1441,8 +1464,17 @@ cleanup: ep->ep_state &= ~SET_DEQ_PENDING; ep->queued_deq_seg = NULL; ep->queued_deq_ptr = NULL; - /* Restart any rings with pending URBs */ - ring_doorbell_for_active_rings(xhci, slot_id, ep_index); + + if (deferred) { + /* We have more streams to clear */ + xhci_dbg(ep->xhci, "%s: Pending TDs to clear, continuing with invalidation\n", + __func__); + xhci_invalidate_cancelled_tds(ep); + } else { + /* Restart any rings with pending URBs */ + xhci_dbg(ep->xhci, "%s: All TDs cleared, ring doorbell\n", __func__); + ring_doorbell_for_active_rings(xhci, slot_id, ep_index); + } } static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id, diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 30415158ed3c..78d014c4d884 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1276,6 +1276,7 @@ enum xhci_cancelled_td_status { TD_DIRTY = 0, TD_HALTED, TD_CLEARING_CACHE, + TD_CLEARING_CACHE_DEFERRED, TD_CLEARED, }; -- cgit v1.2.3 From 0320ca14c6fb68ad19aa72e55a1a21c061b2946b Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Wed, 12 Jun 2024 09:23:13 +0200 Subject: drm: renesas: shmobile: Call drm_atomic_helper_shutdown() at shutdown time Based on grepping through the source code, this driver appears to be missing a call to drm_atomic_helper_shutdown() at system shutdown time. This is important because drm_atomic_helper_shutdown() will cause panels to get disabled cleanly which may be important for their power sequencing. Future changes will remove any custom powering off in individual panel drivers so the DRM drivers need to start getting this right. The fact that we should call drm_atomic_helper_shutdown() in the case of OS shutdown comes straight out of the kernel doc "driver instance overview" in drm_drv.c. [geert: shmob_drm_remove() already calls drm_atomic_helper_shutdown] Suggested-by: Maxime Ripard Signed-off-by: Douglas Anderson Link: https://lore.kernel.org/r/20230901164111.RFT.15.Iaf638a1d4c8b3c307a6192efabb4cbb06b195f15@changeid [geert: s/drm_helper_force_disable_all/drm_atomic_helper_shutdown/] Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Reviewed-by: Sui Jingfeng Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/17c6a5a668e5975f871b77fb1fca6711a0799d9e.1718176895.git.geert+renesas@glider.be --- drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c b/drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c index e83c3e52251d..0250d5f00bf1 100644 --- a/drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c +++ b/drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c @@ -171,6 +171,13 @@ static void shmob_drm_remove(struct platform_device *pdev) drm_kms_helper_poll_fini(ddev); } +static void shmob_drm_shutdown(struct platform_device *pdev) +{ + struct shmob_drm_device *sdev = platform_get_drvdata(pdev); + + drm_atomic_helper_shutdown(&sdev->ddev); +} + static int shmob_drm_probe(struct platform_device *pdev) { struct shmob_drm_platform_data *pdata = pdev->dev.platform_data; @@ -273,6 +280,7 @@ static const struct of_device_id shmob_drm_of_table[] __maybe_unused = { static struct platform_driver shmob_drm_platform_driver = { .probe = shmob_drm_probe, .remove_new = shmob_drm_remove, + .shutdown = shmob_drm_shutdown, .driver = { .name = "shmob-drm", .of_match_table = of_match_ptr(shmob_drm_of_table), -- cgit v1.2.3 From c38896ca6318c2df20bbe6c8e3f633e071fda910 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Tue, 11 Jun 2024 10:27:44 -0700 Subject: drm/mediatek: Call drm_atomic_helper_shutdown() at shutdown time Based on grepping through the source code this driver appears to be missing a call to drm_atomic_helper_shutdown() at system shutdown time. Among other things, this means that if a panel is in use that it won't be cleanly powered off at system shutdown time. The fact that we should call drm_atomic_helper_shutdown() in the case of OS shutdown/restart comes straight out of the kernel doc "driver instance overview" in drm_drv.c. This driver users the component model and shutdown happens in the base driver. The "drvdata" for this driver will always be valid if shutdown() is called and as of commit 2a073968289d ("drm/atomic-helper: drm_atomic_helper_shutdown(NULL) should be a noop") we don't need to confirm that "drm" is non-NULL. Suggested-by: Maxime Ripard Reviewed-by: Maxime Ripard Reviewed-by: Fei Shao Tested-by: Fei Shao Signed-off-by: Douglas Anderson Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20240611102744.v2.1.I2b014f90afc4729b6ecc7b5ddd1f6dedcea4625b@changeid --- drivers/gpu/drm/mediatek/mtk_drm_drv.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c index b5f605751b0a..de811e2265da 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c @@ -952,6 +952,13 @@ static void mtk_drm_remove(struct platform_device *pdev) of_node_put(private->comp_node[i]); } +static void mtk_drm_shutdown(struct platform_device *pdev) +{ + struct mtk_drm_private *private = platform_get_drvdata(pdev); + + drm_atomic_helper_shutdown(private->drm); +} + static int mtk_drm_sys_prepare(struct device *dev) { struct mtk_drm_private *private = dev_get_drvdata(dev); @@ -983,6 +990,7 @@ static const struct dev_pm_ops mtk_drm_pm_ops = { static struct platform_driver mtk_drm_platform_driver = { .probe = mtk_drm_probe, .remove_new = mtk_drm_remove, + .shutdown = mtk_drm_shutdown, .driver = { .name = "mediatek-drm", .pm = &mtk_drm_pm_ops, -- cgit v1.2.3 From 350cbb5d2f676bff22c49e5e81764c3b8da342a9 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 11 Jun 2024 16:53:06 +0200 Subject: cpufreq: intel_pstate: Check turbo_is_disabled() in store_no_turbo() After recent changes in intel_pstate, global.turbo_disabled is only set at the initialization time and never changed. However, it turns out that on some systems the "turbo disabled" bit in MSR_IA32_MISC_ENABLE, the initial state of which is reflected by global.turbo_disabled, can be flipped later and there should be a way to take that into account (other than checking that MSR every time the driver runs which is costly and useless overhead on the vast majority of systems). For this purpose, notice that before the changes in question, store_no_turbo() contained a turbo_is_disabled() check that was used for updating global.turbo_disabled if the "turbo disabled" bit in MSR_IA32_MISC_ENABLE had been flipped and that functionality can be restored. Then, users will be able to reset global.turbo_disabled by writing 0 to no_turbo which used to work before on systems with flipping "turbo disabled" bit. This guarantees the driver state to remain in sync, but READ_ONCE() annotations need to be added in two places where global.turbo_disabled is accessed locklessly, so modify the driver to make that happen. Fixes: 0940f1a8011f ("cpufreq: intel_pstate: Do not update global.turbo_disabled after initialization") Closes: https://lore.kernel.org/linux-pm/bf3ebf1571a4788e97daf861eb493c12d42639a3.camel@xry111.site Suggested-by: Srinivas Pandruvada Reported-by: Xi Ruoyao Tested-by: Xi Ruoyao Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 65d3f79104bd..15de5e3d96fd 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -1302,12 +1302,17 @@ static ssize_t store_no_turbo(struct kobject *a, struct kobj_attribute *b, no_turbo = !!clamp_t(int, input, 0, 1); - if (no_turbo == global.no_turbo) - goto unlock_driver; - - if (global.turbo_disabled) { - pr_notice_once("Turbo disabled by BIOS or unavailable on processor\n"); + WRITE_ONCE(global.turbo_disabled, turbo_is_disabled()); + if (global.turbo_disabled && !no_turbo) { + pr_notice("Turbo disabled by BIOS or unavailable on processor\n"); count = -EPERM; + if (global.no_turbo) + goto unlock_driver; + else + no_turbo = 1; + } + + if (no_turbo == global.no_turbo) { goto unlock_driver; } @@ -1762,7 +1767,7 @@ static u64 atom_get_val(struct cpudata *cpudata, int pstate) u32 vid; val = (u64)pstate << 8; - if (READ_ONCE(global.no_turbo) && !global.turbo_disabled) + if (READ_ONCE(global.no_turbo) && !READ_ONCE(global.turbo_disabled)) val |= (u64)1 << 32; vid_fp = cpudata->vid.min + mul_fp( @@ -1927,7 +1932,7 @@ static u64 core_get_val(struct cpudata *cpudata, int pstate) u64 val; val = (u64)pstate << 8; - if (READ_ONCE(global.no_turbo) && !global.turbo_disabled) + if (READ_ONCE(global.no_turbo) && !READ_ONCE(global.turbo_disabled)) val |= (u64)1 << 32; return val; -- cgit v1.2.3 From d6d5645e5fc1233a7ba950de4a72981c394a2557 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 31 May 2024 11:19:14 +0200 Subject: i2c: at91: Fix the functionality flags of the slave-only interface When an I2C adapter acts only as a slave, it should not claim to support I2C master capabilities. Fixes: 9d3ca54b550c ("i2c: at91: added slave mode support") Signed-off-by: Jean Delvare Cc: Juergen Fitschen Cc: Ludovic Desroches Cc: Codrin Ciubotariu Cc: Andi Shyti Cc: Nicolas Ferre Cc: Alexandre Belloni Cc: Claudiu Beznea Signed-off-by: Andi Shyti --- drivers/i2c/busses/i2c-at91-slave.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-at91-slave.c b/drivers/i2c/busses/i2c-at91-slave.c index d6eeea5166c0..131a67d9d4a6 100644 --- a/drivers/i2c/busses/i2c-at91-slave.c +++ b/drivers/i2c/busses/i2c-at91-slave.c @@ -106,8 +106,7 @@ static int at91_unreg_slave(struct i2c_client *slave) static u32 at91_twi_func(struct i2c_adapter *adapter) { - return I2C_FUNC_SLAVE | I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL - | I2C_FUNC_SMBUS_READ_BLOCK_DATA; + return I2C_FUNC_SLAVE; } static const struct i2c_algorithm at91_twi_algorithm_slave = { -- cgit v1.2.3 From cbf3fb5b29e99e3689d63a88c3cddbffa1b8de99 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 31 May 2024 11:17:48 +0200 Subject: i2c: designware: Fix the functionality flags of the slave-only interface When an I2C adapter acts only as a slave, it should not claim to support I2C master capabilities. Fixes: 5b6d721b266a ("i2c: designware: enable SLAVE in platform module") Signed-off-by: Jean Delvare Cc: Luis Oliveira Cc: Jarkko Nikula Cc: Andy Shevchenko Cc: Mika Westerberg Cc: Jan Dabros Cc: Andi Shyti Reviewed-by: Andy Shevchenko Acked-by: Jarkko Nikula Tested-by: Jarkko Nikula Signed-off-by: Andi Shyti --- drivers/i2c/busses/i2c-designware-slave.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c index 2e079cf20bb5..78e2c47e3d7d 100644 --- a/drivers/i2c/busses/i2c-designware-slave.c +++ b/drivers/i2c/busses/i2c-designware-slave.c @@ -220,7 +220,7 @@ static const struct i2c_algorithm i2c_dw_algo = { void i2c_dw_configure_slave(struct dw_i2c_dev *dev) { - dev->functionality = I2C_FUNC_SLAVE | DW_IC_DEFAULT_FUNCTIONALITY; + dev->functionality = I2C_FUNC_SLAVE; dev->slave_cfg = DW_IC_CON_RX_FIFO_FULL_HLD_CTRL | DW_IC_CON_RESTART_EN | DW_IC_CON_STOP_DET_IFADDRESSED; -- cgit v1.2.3 From cea2a26553ace13ee36b56dc09ad548b5e6907df Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 11 Jun 2024 17:58:57 +0300 Subject: mailmap: Add my outdated addresses to the map file There is a couple of outdated addresses that are still visible in the Git history, add them to .mailmap. While at it, replace one in the comment. Signed-off-by: Andy Shevchenko Signed-off-by: Linus Torvalds --- .mailmap | 2 ++ drivers/media/pci/saa7134/saa7134-cards.c | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/.mailmap b/.mailmap index efd9fa867a8e..b6e9fe0916ce 100644 --- a/.mailmap +++ b/.mailmap @@ -72,6 +72,8 @@ Andrey Ryabinin Andrzej Hajda André Almeida Andy Adamson +Andy Shevchenko +Andy Shevchenko Anilkumar Kolli Anirudh Ghayal Antoine Tenart diff --git a/drivers/media/pci/saa7134/saa7134-cards.c b/drivers/media/pci/saa7134/saa7134-cards.c index 1280696f65f2..e80fb4ebfda6 100644 --- a/drivers/media/pci/saa7134/saa7134-cards.c +++ b/drivers/media/pci/saa7134/saa7134-cards.c @@ -5152,7 +5152,7 @@ struct saa7134_board saa7134_boards[] = { }, }, [SAA7134_BOARD_AVERMEDIA_STUDIO_507UA] = { - /* Andy Shevchenko */ + /* Andy Shevchenko */ .name = "Avermedia AVerTV Studio 507UA", .audio_clock = 0x00187de7, .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* Should be MK5 */ -- cgit v1.2.3 From e038ee6189842e9662d2fc59d09dbcf48350cf99 Mon Sep 17 00:00:00 2001 From: Anuj Gupta Date: Mon, 10 Jun 2024 16:41:44 +0530 Subject: block: unmap and free user mapped integrity via submitter The user mapped intergity is copied back and unpinned by bio_integrity_free which is a low-level routine. Do it via the submitter rather than doing it in the low-level block layer code, to split the submitter side from the consumer side of the bio. Signed-off-by: Anuj Gupta Signed-off-by: Kanchan Joshi Reviewed-by: Christoph Hellwig Reviewed-by: Martin K. Petersen Reviewed-by: Ming Lei Link: https://lore.kernel.org/r/20240610111144.14647-1-anuj20.g@samsung.com Signed-off-by: Jens Axboe --- block/bio-integrity.c | 26 ++++++++++++++++++++++++-- drivers/nvme/host/ioctl.c | 15 +++++++++++---- include/linux/bio.h | 4 ++++ 3 files changed, 39 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/block/bio-integrity.c b/block/bio-integrity.c index 2e3e8e04961e..8b528e12136f 100644 --- a/block/bio-integrity.c +++ b/block/bio-integrity.c @@ -144,16 +144,38 @@ void bio_integrity_free(struct bio *bio) struct bio_integrity_payload *bip = bio_integrity(bio); struct bio_set *bs = bio->bi_pool; + if (bip->bip_flags & BIP_INTEGRITY_USER) + return; if (bip->bip_flags & BIP_BLOCK_INTEGRITY) kfree(bvec_virt(bip->bip_vec)); - else if (bip->bip_flags & BIP_INTEGRITY_USER) - bio_integrity_unmap_user(bip); __bio_integrity_free(bs, bip); bio->bi_integrity = NULL; bio->bi_opf &= ~REQ_INTEGRITY; } +/** + * bio_integrity_unmap_free_user - Unmap and free bio user integrity payload + * @bio: bio containing bip to be unmapped and freed + * + * Description: Used to unmap and free the user mapped integrity portion of a + * bio. Submitter attaching the user integrity buffer is responsible for + * unmapping and freeing it during completion. + */ +void bio_integrity_unmap_free_user(struct bio *bio) +{ + struct bio_integrity_payload *bip = bio_integrity(bio); + struct bio_set *bs = bio->bi_pool; + + if (WARN_ON_ONCE(!(bip->bip_flags & BIP_INTEGRITY_USER))) + return; + bio_integrity_unmap_user(bip); + __bio_integrity_free(bs, bip); + bio->bi_integrity = NULL; + bio->bi_opf &= ~REQ_INTEGRITY; +} +EXPORT_SYMBOL(bio_integrity_unmap_free_user); + /** * bio_integrity_add_page - Attach integrity metadata * @bio: bio to update diff --git a/drivers/nvme/host/ioctl.c b/drivers/nvme/host/ioctl.c index 9d9d2a127c4e..8b69427a4476 100644 --- a/drivers/nvme/host/ioctl.c +++ b/drivers/nvme/host/ioctl.c @@ -111,6 +111,13 @@ static struct request *nvme_alloc_user_request(struct request_queue *q, return req; } +static void nvme_unmap_bio(struct bio *bio) +{ + if (bio_integrity(bio)) + bio_integrity_unmap_free_user(bio); + blk_rq_unmap_user(bio); +} + static int nvme_map_user_request(struct request *req, u64 ubuffer, unsigned bufflen, void __user *meta_buffer, unsigned meta_len, u32 meta_seed, struct io_uring_cmd *ioucmd, unsigned int flags) @@ -157,7 +164,7 @@ static int nvme_map_user_request(struct request *req, u64 ubuffer, out_unmap: if (bio) - blk_rq_unmap_user(bio); + nvme_unmap_bio(bio); out: blk_mq_free_request(req); return ret; @@ -195,7 +202,7 @@ static int nvme_submit_user_cmd(struct request_queue *q, if (result) *result = le64_to_cpu(nvme_req(req)->result.u64); if (bio) - blk_rq_unmap_user(bio); + nvme_unmap_bio(bio); blk_mq_free_request(req); if (effects) @@ -406,7 +413,7 @@ static void nvme_uring_task_cb(struct io_uring_cmd *ioucmd, struct nvme_uring_cmd_pdu *pdu = nvme_uring_cmd_pdu(ioucmd); if (pdu->bio) - blk_rq_unmap_user(pdu->bio); + nvme_unmap_bio(pdu->bio); io_uring_cmd_done(ioucmd, pdu->status, pdu->result, issue_flags); } @@ -432,7 +439,7 @@ static enum rq_end_io_ret nvme_uring_cmd_end_io(struct request *req, */ if (blk_rq_is_poll(req)) { if (pdu->bio) - blk_rq_unmap_user(pdu->bio); + nvme_unmap_bio(pdu->bio); io_uring_cmd_iopoll_done(ioucmd, pdu->result, pdu->status); } else { io_uring_cmd_do_in_task_lazy(ioucmd, nvme_uring_task_cb); diff --git a/include/linux/bio.h b/include/linux/bio.h index d5379548d684..818e93612947 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -731,6 +731,7 @@ static inline bool bioset_initialized(struct bio_set *bs) bip_for_each_vec(_bvl, _bio->bi_integrity, _iter) int bio_integrity_map_user(struct bio *bio, void __user *ubuf, ssize_t len, u32 seed); +void bio_integrity_unmap_free_user(struct bio *bio); extern struct bio_integrity_payload *bio_integrity_alloc(struct bio *, gfp_t, unsigned int); extern int bio_integrity_add_page(struct bio *, struct page *, unsigned int, unsigned int); extern bool bio_integrity_prep(struct bio *); @@ -807,6 +808,9 @@ static inline int bio_integrity_map_user(struct bio *bio, void __user *ubuf, { return -EINVAL; } +static inline void bio_integrity_unmap_free_user(struct bio *bio) +{ +} #endif /* CONFIG_BLK_DEV_INTEGRITY */ -- cgit v1.2.3 From e5d574ab37f5f2e7937405613d9b1a724811e5ad Mon Sep 17 00:00:00 2001 From: Chunguang Xu Date: Tue, 11 Jun 2024 18:02:08 +0800 Subject: nvme: avoid double free special payload If a discard request needs to be retried, and that retry may fail before a new special payload is added, a double free will result. Clear the RQF_SPECIAL_LOAD when the request is cleaned. Signed-off-by: Chunguang Xu Reviewed-by: Sagi Grimberg Reviewed-by: Max Gurtovoy Signed-off-by: Keith Busch --- drivers/nvme/host/core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index f5d150c62955..c40930d10bd3 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -998,6 +998,7 @@ void nvme_cleanup_cmd(struct request *req) clear_bit_unlock(0, &ctrl->discard_page_busy); else kfree(bvec_virt(&req->special_vec)); + req->rq_flags &= ~RQF_SPECIAL_PAYLOAD; } } EXPORT_SYMBOL_GPL(nvme_cleanup_cmd); -- cgit v1.2.3 From d76584e53f4244dbc154bec447c3852600acc914 Mon Sep 17 00:00:00 2001 From: Daniel Wagner Date: Wed, 12 Jun 2024 16:02:40 +0200 Subject: nvmet-passthru: propagate status from id override functions The id override functions return a status which is not propagated to the caller. Fixes: c1fef73f793b ("nvmet: add passthru code to process commands") Signed-off-by: Daniel Wagner Reviewed-by: Chaitanya Kulkarni Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch --- drivers/nvme/target/passthru.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/target/passthru.c b/drivers/nvme/target/passthru.c index bb4a69d538fd..f003782d4ecf 100644 --- a/drivers/nvme/target/passthru.c +++ b/drivers/nvme/target/passthru.c @@ -226,13 +226,13 @@ static void nvmet_passthru_execute_cmd_work(struct work_struct *w) req->cmd->common.opcode == nvme_admin_identify) { switch (req->cmd->identify.cns) { case NVME_ID_CNS_CTRL: - nvmet_passthru_override_id_ctrl(req); + status = nvmet_passthru_override_id_ctrl(req); break; case NVME_ID_CNS_NS: - nvmet_passthru_override_id_ns(req); + status = nvmet_passthru_override_id_ns(req); break; case NVME_ID_CNS_NS_DESC_LIST: - nvmet_passthru_override_id_descs(req); + status = nvmet_passthru_override_id_descs(req); break; } } else if (status < 0) -- cgit v1.2.3 From cd0c1b8e045a8d2785342b385cb2684d9b48e426 Mon Sep 17 00:00:00 2001 From: Daniel Wagner Date: Wed, 12 Jun 2024 16:11:59 +0200 Subject: nvmet: always initialize cqe.result The spec doesn't mandate that the first two double words (aka results) for the command queue entry need to be set to 0 when they are not used (not specified). Though, the target implemention returns 0 for TCP and FC but not for RDMA. Let's make RDMA behave the same and thus explicitly initializing the result field. This prevents leaking any data from the stack. Signed-off-by: Daniel Wagner Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch --- drivers/nvme/target/core.c | 1 + drivers/nvme/target/fabrics-cmd-auth.c | 3 --- drivers/nvme/target/fabrics-cmd.c | 6 ------ 3 files changed, 1 insertion(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c index 06f0c587f343..4ff460ba2826 100644 --- a/drivers/nvme/target/core.c +++ b/drivers/nvme/target/core.c @@ -957,6 +957,7 @@ bool nvmet_req_init(struct nvmet_req *req, struct nvmet_cq *cq, req->metadata_sg_cnt = 0; req->transfer_len = 0; req->metadata_len = 0; + req->cqe->result.u64 = 0; req->cqe->status = 0; req->cqe->sq_head = 0; req->ns = NULL; diff --git a/drivers/nvme/target/fabrics-cmd-auth.c b/drivers/nvme/target/fabrics-cmd-auth.c index d61b8c6ff3b2..cb34d644ed08 100644 --- a/drivers/nvme/target/fabrics-cmd-auth.c +++ b/drivers/nvme/target/fabrics-cmd-auth.c @@ -333,7 +333,6 @@ done: pr_debug("%s: ctrl %d qid %d nvme status %x error loc %d\n", __func__, ctrl->cntlid, req->sq->qid, status, req->error_loc); - req->cqe->result.u64 = 0; if (req->sq->dhchap_step != NVME_AUTH_DHCHAP_MESSAGE_SUCCESS2 && req->sq->dhchap_step != NVME_AUTH_DHCHAP_MESSAGE_FAILURE2) { unsigned long auth_expire_secs = ctrl->kato ? ctrl->kato : 120; @@ -516,8 +515,6 @@ void nvmet_execute_auth_receive(struct nvmet_req *req) status = nvmet_copy_to_sgl(req, 0, d, al); kfree(d); done: - req->cqe->result.u64 = 0; - if (req->sq->dhchap_step == NVME_AUTH_DHCHAP_MESSAGE_SUCCESS2) nvmet_auth_sq_free(req->sq); else if (req->sq->dhchap_step == NVME_AUTH_DHCHAP_MESSAGE_FAILURE1) { diff --git a/drivers/nvme/target/fabrics-cmd.c b/drivers/nvme/target/fabrics-cmd.c index 042b379cbb36..69d77d34bec1 100644 --- a/drivers/nvme/target/fabrics-cmd.c +++ b/drivers/nvme/target/fabrics-cmd.c @@ -226,9 +226,6 @@ static void nvmet_execute_admin_connect(struct nvmet_req *req) if (status) goto out; - /* zero out initial completion result, assign values as needed */ - req->cqe->result.u32 = 0; - if (c->recfmt != 0) { pr_warn("invalid connect version (%d).\n", le16_to_cpu(c->recfmt)); @@ -305,9 +302,6 @@ static void nvmet_execute_io_connect(struct nvmet_req *req) if (status) goto out; - /* zero out initial completion result, assign values as needed */ - req->cqe->result.u32 = 0; - if (c->recfmt != 0) { pr_warn("invalid connect version (%d).\n", le16_to_cpu(c->recfmt)); -- cgit v1.2.3 From 957df9af723ccc570da835978cf7fe7863632842 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 4 Jun 2024 16:15:31 -0600 Subject: nbd: Remove __force casts Make it again possible for sparse to verify that blk_status_t and Unix error codes are used in the proper context by making nbd_send_cmd() return a blk_status_t instead of an integer. No functionality has been changed. Signed-off-by: Christoph Hellwig [ bvanassche: added description and made two small formatting changes ] Signed-off-by: Bart Van Assche Reviewed-by: Chaitanya Kulkarni Link: https://lore.kernel.org/r/20240604221531.327131-1-bvanassche@acm.org Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 51 ++++++++++++++++++++++----------------------------- 1 file changed, 22 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 22a79a62cc4e..b87aa80a46dd 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -589,10 +589,11 @@ static inline int was_interrupted(int result) } /* - * Returns BLK_STS_RESOURCE if the caller should retry after a delay. Returns - * -EAGAIN if the caller should requeue @cmd. Returns -EIO if sending failed. + * Returns BLK_STS_RESOURCE if the caller should retry after a delay. + * Returns BLK_STS_IOERR if sending failed. */ -static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index) +static blk_status_t nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, + int index) { struct request *req = blk_mq_rq_from_pdu(cmd); struct nbd_config *config = nbd->config; @@ -614,13 +615,13 @@ static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index) type = req_to_nbd_cmd_type(req); if (type == U32_MAX) - return -EIO; + return BLK_STS_IOERR; if (rq_data_dir(req) == WRITE && (config->flags & NBD_FLAG_READ_ONLY)) { dev_err_ratelimited(disk_to_dev(nbd->disk), "Write on read-only\n"); - return -EIO; + return BLK_STS_IOERR; } if (req->cmd_flags & REQ_FUA) @@ -674,11 +675,11 @@ static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index) nsock->sent = sent; } set_bit(NBD_CMD_REQUEUED, &cmd->flags); - return (__force int)BLK_STS_RESOURCE; + return BLK_STS_RESOURCE; } dev_err_ratelimited(disk_to_dev(nbd->disk), "Send control failed (result %d)\n", result); - return -EAGAIN; + goto requeue; } send_pages: if (type != NBD_CMD_WRITE) @@ -715,12 +716,12 @@ send_pages: nsock->pending = req; nsock->sent = sent; set_bit(NBD_CMD_REQUEUED, &cmd->flags); - return (__force int)BLK_STS_RESOURCE; + return BLK_STS_RESOURCE; } dev_err(disk_to_dev(nbd->disk), "Send data failed (result %d)\n", result); - return -EAGAIN; + goto requeue; } /* * The completion might already have come in, @@ -737,7 +738,16 @@ out: trace_nbd_payload_sent(req, handle); nsock->pending = NULL; nsock->sent = 0; - return 0; + __set_bit(NBD_CMD_INFLIGHT, &cmd->flags); + return BLK_STS_OK; + +requeue: + /* retry on a different socket */ + dev_err_ratelimited(disk_to_dev(nbd->disk), + "Request send failed, requeueing\n"); + nbd_mark_nsock_dead(nbd, nsock, 1); + nbd_requeue_cmd(cmd); + return BLK_STS_OK; } static int nbd_read_reply(struct nbd_device *nbd, struct socket *sock, @@ -1018,7 +1028,7 @@ static blk_status_t nbd_handle_cmd(struct nbd_cmd *cmd, int index) struct nbd_device *nbd = cmd->nbd; struct nbd_config *config; struct nbd_sock *nsock; - int ret; + blk_status_t ret; lockdep_assert_held(&cmd->lock); @@ -1072,28 +1082,11 @@ again: ret = BLK_STS_OK; goto out; } - /* - * Some failures are related to the link going down, so anything that - * returns EAGAIN can be retried on a different socket. - */ ret = nbd_send_cmd(nbd, cmd, index); - /* - * Access to this flag is protected by cmd->lock, thus it's safe to set - * the flag after nbd_send_cmd() succeed to send request to server. - */ - if (!ret) - __set_bit(NBD_CMD_INFLIGHT, &cmd->flags); - else if (ret == -EAGAIN) { - dev_err_ratelimited(disk_to_dev(nbd->disk), - "Request send failed, requeueing\n"); - nbd_mark_nsock_dead(nbd, nsock, 1); - nbd_requeue_cmd(cmd); - ret = BLK_STS_OK; - } out: mutex_unlock(&nsock->tx_lock); nbd_config_put(nbd); - return ret < 0 ? BLK_STS_IOERR : (__force blk_status_t)ret; + return ret; } static blk_status_t nbd_queue_rq(struct blk_mq_hw_ctx *hctx, -- cgit v1.2.3 From d71a989cf5d961989c273093cdff2550acdde314 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Thu, 6 Jun 2024 21:52:07 -0600 Subject: vfio/pci: Insert full vma on mmap'd MMIO fault In order to improve performance of typical scenarios we can try to insert the entire vma on fault. This accelerates typical cases, such as when the MMIO region is DMA mapped by QEMU. The vfio_iommu_type1 driver will fault in the entire DMA mapped range through fixup_user_fault(). In synthetic testing, this improves the time required to walk a PCI BAR mapping from userspace by roughly 1/3rd. This is likely an interim solution until vmf_insert_pfn_{pmd,pud}() gain support for pfnmaps. Suggested-by: Yan Zhao Link: https://lore.kernel.org/all/Zl6XdUkt%2FzMMGOLF@yzhao56-desk.sh.intel.com/ Reviewed-by: Yan Zhao Link: https://lore.kernel.org/r/20240607035213.2054226-1-alex.williamson@redhat.com Signed-off-by: Alex Williamson --- drivers/vfio/pci/vfio_pci_core.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/vfio/pci/vfio_pci_core.c b/drivers/vfio/pci/vfio_pci_core.c index db31c27bf78b..987c7921affa 100644 --- a/drivers/vfio/pci/vfio_pci_core.c +++ b/drivers/vfio/pci/vfio_pci_core.c @@ -1662,6 +1662,7 @@ static vm_fault_t vfio_pci_mmap_fault(struct vm_fault *vmf) struct vm_area_struct *vma = vmf->vma; struct vfio_pci_core_device *vdev = vma->vm_private_data; unsigned long pfn, pgoff = vmf->pgoff - vma->vm_pgoff; + unsigned long addr = vma->vm_start; vm_fault_t ret = VM_FAULT_SIGBUS; pfn = vma_to_pfn(vma); @@ -1669,11 +1670,25 @@ static vm_fault_t vfio_pci_mmap_fault(struct vm_fault *vmf) down_read(&vdev->memory_lock); if (vdev->pm_runtime_engaged || !__vfio_pci_memory_enabled(vdev)) - goto out_disabled; + goto out_unlock; ret = vmf_insert_pfn(vma, vmf->address, pfn + pgoff); + if (ret & VM_FAULT_ERROR) + goto out_unlock; -out_disabled: + /* + * Pre-fault the remainder of the vma, abort further insertions and + * supress error if fault is encountered during pre-fault. + */ + for (; addr < vma->vm_end; addr += PAGE_SIZE, pfn++) { + if (addr == vmf->address) + continue; + + if (vmf_insert_pfn(vma, addr, pfn) & VM_FAULT_ERROR) + break; + } + +out_unlock: up_read(&vdev->memory_lock); return ret; -- cgit v1.2.3 From 12243a8115f8583a6bcada7717c01fb164e23c89 Mon Sep 17 00:00:00 2001 From: Dimitri Sivanich Date: Thu, 30 May 2024 13:36:03 -0500 Subject: iommu/amd: Fix panic accessing amd_iommu_enable_faulting This fixes a bug introduced by commit d74169ceb0d2 ("iommu/vt-d: Allocate DMAR fault interrupts locally"). The panic happens when amd_iommu_enable_faulting is called from CPUHP_AP_ONLINE_DYN context. Fixes: d74169ceb0d2 ("iommu/vt-d: Allocate DMAR fault interrupts locally") Signed-off-by: Dimitri Sivanich Tested-by: Yi Zhang Reviewed-by: Jerry Snitselaar Reviewed-by: Vasant Hegde Link: https://lore.kernel.org/r/ZljHE/R4KLzGU6vx@hpe.com Signed-off-by: Joerg Roedel --- drivers/iommu/amd/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c index 27e293727095..161248067776 100644 --- a/drivers/iommu/amd/init.c +++ b/drivers/iommu/amd/init.c @@ -3362,7 +3362,7 @@ int amd_iommu_reenable(int mode) return 0; } -int __init amd_iommu_enable_faulting(unsigned int cpu) +int amd_iommu_enable_faulting(unsigned int cpu) { /* We enable MSI later when PCI is initialized */ return 0; -- cgit v1.2.3 From 0e6b6dedf16800df0ff73ffe2bb5066514db29c2 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 12 Jun 2024 16:15:55 +0200 Subject: ACPI: EC: Evaluate orphan _REG under EC device After starting to install the EC address space handler at the ACPI namespace root, if there is an "orphan" _REG method in the EC device's scope, it will not be evaluated any more. This breaks EC operation regions on some systems, like Asus gu605. To address this, use a wrapper around an existing ACPICA function to look for an "orphan" _REG method in the EC device scope and evaluate it if present. Fixes: 60fa6ae6e6d0 ("ACPI: EC: Install address space handler at the namespace root") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218945 Reported-by: VitaliiT Tested-by: VitaliiT Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/acevents.h | 4 ++++ drivers/acpi/acpica/evregion.c | 6 +---- drivers/acpi/acpica/evxfregn.c | 54 ++++++++++++++++++++++++++++++++++++++++++ drivers/acpi/ec.c | 3 +++ include/acpi/acpixf.h | 4 ++++ 5 files changed, 66 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h index ddd072cbc738..2133085deda7 100644 --- a/drivers/acpi/acpica/acevents.h +++ b/drivers/acpi/acpica/acevents.h @@ -191,6 +191,10 @@ void acpi_ev_execute_reg_methods(struct acpi_namespace_node *node, acpi_adr_space_type space_id, u32 function); +void +acpi_ev_execute_orphan_reg_method(struct acpi_namespace_node *node, + acpi_adr_space_type space_id); + acpi_status acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function); diff --git a/drivers/acpi/acpica/evregion.c b/drivers/acpi/acpica/evregion.c index 18fdf2bc2d49..dc6004daf624 100644 --- a/drivers/acpi/acpica/evregion.c +++ b/drivers/acpi/acpica/evregion.c @@ -20,10 +20,6 @@ extern u8 acpi_gbl_default_address_spaces[]; /* Local prototypes */ -static void -acpi_ev_execute_orphan_reg_method(struct acpi_namespace_node *device_node, - acpi_adr_space_type space_id); - static acpi_status acpi_ev_reg_run(acpi_handle obj_handle, u32 level, void *context, void **return_value); @@ -818,7 +814,7 @@ acpi_ev_reg_run(acpi_handle obj_handle, * ******************************************************************************/ -static void +void acpi_ev_execute_orphan_reg_method(struct acpi_namespace_node *device_node, acpi_adr_space_type space_id) { diff --git a/drivers/acpi/acpica/evxfregn.c b/drivers/acpi/acpica/evxfregn.c index 3197e6303c5b..624361a5f34d 100644 --- a/drivers/acpi/acpica/evxfregn.c +++ b/drivers/acpi/acpica/evxfregn.c @@ -306,3 +306,57 @@ acpi_execute_reg_methods(acpi_handle device, acpi_adr_space_type space_id) } ACPI_EXPORT_SYMBOL(acpi_execute_reg_methods) + +/******************************************************************************* + * + * FUNCTION: acpi_execute_orphan_reg_method + * + * PARAMETERS: device - Handle for the device + * space_id - The address space ID + * + * RETURN: Status + * + * DESCRIPTION: Execute an "orphan" _REG method that appears under an ACPI + * device. This is a _REG method that has no corresponding region + * within the device's scope. + * + ******************************************************************************/ +acpi_status +acpi_execute_orphan_reg_method(acpi_handle device, acpi_adr_space_type space_id) +{ + struct acpi_namespace_node *node; + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_execute_orphan_reg_method); + + /* Parameter validation */ + + if (!device) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Convert and validate the device handle */ + + node = acpi_ns_validate_handle(device); + if (node) { + + /* + * If an "orphan" _REG method is present in the device's scope + * for the given address space ID, run it. + */ + + acpi_ev_execute_orphan_reg_method(node, space_id); + } else { + status = AE_BAD_PARAMETER; + } + + (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_execute_orphan_reg_method) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 68dd17f96f63..299ec653388c 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -1507,6 +1507,9 @@ static int ec_install_handlers(struct acpi_ec *ec, struct acpi_device *device, if (call_reg && !test_bit(EC_FLAGS_EC_REG_CALLED, &ec->flags)) { acpi_execute_reg_methods(scope_handle, ACPI_ADR_SPACE_EC); + if (scope_handle != ec->handle) + acpi_execute_orphan_reg_method(ec->handle, ACPI_ADR_SPACE_EC); + set_bit(EC_FLAGS_EC_REG_CALLED, &ec->flags); } diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 94d0fc3bd412..80dc36f9d527 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -662,6 +662,10 @@ ACPI_EXTERNAL_RETURN_STATUS(acpi_status acpi_execute_reg_methods(acpi_handle device, acpi_adr_space_type space_id)) +ACPI_EXTERNAL_RETURN_STATUS(acpi_status + acpi_execute_orphan_reg_method(acpi_handle device, + acpi_adr_space_type + space_id)) ACPI_EXTERNAL_RETURN_STATUS(acpi_status acpi_remove_address_space_handler(acpi_handle device, -- cgit v1.2.3 From 7c877115da4196fa108dcfefd49f5a9b67b8d8ca Mon Sep 17 00:00:00 2001 From: Riana Tauro Date: Thu, 6 Jun 2024 15:38:41 +0530 Subject: drm/xe/xe_gt_idle: use GT forcewake domain assertion MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The rc6 registers used in disable_c6 function belong to the GT forcewake domain. Hence change the forcewake assertion to check GT forcewake domain. v2: add fixes tag (Himal) Fixes: 975e4a3795d4 ("drm/xe: Manually setup C6 when skip_guc_pc is set") Signed-off-by: Riana Tauro Reviewed-by: Rodrigo Vivi Reviewed-by: Himal Prasad Ghimiray Link: https://patchwork.freedesktop.org/patch/msgid/20240606100842.956072-2-riana.tauro@intel.com Signed-off-by: Rodrigo Vivi (cherry picked from commit 21b708554648177a0078962c31629bce31ef5d83) Signed-off-by: Thomas Hellström --- drivers/gpu/drm/xe/xe_gt_idle.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/xe/xe_gt_idle.c b/drivers/gpu/drm/xe/xe_gt_idle.c index 8fc0f3f6ecc5..c699f47f4700 100644 --- a/drivers/gpu/drm/xe/xe_gt_idle.c +++ b/drivers/gpu/drm/xe/xe_gt_idle.c @@ -199,7 +199,7 @@ void xe_gt_idle_enable_c6(struct xe_gt *gt) void xe_gt_idle_disable_c6(struct xe_gt *gt) { xe_device_assert_mem_access(gt_to_xe(gt)); - xe_force_wake_assert_held(gt_to_fw(gt), XE_FORCEWAKE_ALL); + xe_force_wake_assert_held(gt_to_fw(gt), XE_FW_GT); xe_mmio_write32(gt, PG_ENABLE, 0); xe_mmio_write32(gt, RC_CONTROL, 0); -- cgit v1.2.3 From cd554e1e118a6aa1c919309cd28398b003f69c1f Mon Sep 17 00:00:00 2001 From: Michal Wajdeczko Date: Fri, 7 Jun 2024 17:31:55 +0200 Subject: drm/xe/pf: Assert LMEM provisioning is done only on DGFX MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Local Memory (aka VRAM) is only available on DGFX platforms. We shouldn't attempt to provision VFs with LMEM or attempt to update the LMTT on non-DGFX platforms. Add missing asserts that would enforce that and fix release code that could crash on iGFX due to uninitialized LMTT. Fixes: 0698ff57bf32 ("drm/xe/pf: Update the LMTT when freeing VF GT config") Signed-off-by: Michal Wajdeczko Cc: Piotr Piórkowski Reviewed-by: Rodrigo Vivi Link: https://patchwork.freedesktop.org/patch/msgid/20240607153155.1592-1-michal.wajdeczko@intel.com (cherry picked from commit b321cb83a375bcc18cd0a4b62bdeaf6905cca769) Signed-off-by: Thomas Hellström --- drivers/gpu/drm/xe/xe_gt_sriov_pf_config.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/xe/xe_gt_sriov_pf_config.c b/drivers/gpu/drm/xe/xe_gt_sriov_pf_config.c index 476d613333a9..6c2cfc54442c 100644 --- a/drivers/gpu/drm/xe/xe_gt_sriov_pf_config.c +++ b/drivers/gpu/drm/xe/xe_gt_sriov_pf_config.c @@ -1274,6 +1274,9 @@ static void pf_reset_vf_lmtt(struct xe_device *xe, unsigned int vfid) struct xe_tile *tile; unsigned int tid; + xe_assert(xe, IS_DGFX(xe)); + xe_assert(xe, IS_SRIOV_PF(xe)); + for_each_tile(tile, xe, tid) { lmtt = &tile->sriov.pf.lmtt; xe_lmtt_drop_pages(lmtt, vfid); @@ -1292,6 +1295,9 @@ static int pf_update_vf_lmtt(struct xe_device *xe, unsigned int vfid) unsigned int tid; int err; + xe_assert(xe, IS_DGFX(xe)); + xe_assert(xe, IS_SRIOV_PF(xe)); + total = 0; for_each_tile(tile, xe, tid) total += pf_get_vf_config_lmem(tile->primary_gt, vfid); @@ -1337,6 +1343,7 @@ fail: static void pf_release_vf_config_lmem(struct xe_gt *gt, struct xe_gt_sriov_config *config) { + xe_gt_assert(gt, IS_DGFX(gt_to_xe(gt))); xe_gt_assert(gt, !xe_gt_is_media_type(gt)); lockdep_assert_held(xe_gt_sriov_pf_master_mutex(gt)); @@ -1355,6 +1362,7 @@ static int pf_provision_vf_lmem(struct xe_gt *gt, unsigned int vfid, u64 size) int err; xe_gt_assert(gt, vfid); + xe_gt_assert(gt, IS_DGFX(xe)); xe_gt_assert(gt, !xe_gt_is_media_type(gt)); size = round_up(size, pf_get_lmem_alignment(gt)); @@ -1745,11 +1753,14 @@ static void pf_reset_config_sched(struct xe_gt *gt, struct xe_gt_sriov_config *c static void pf_release_vf_config(struct xe_gt *gt, unsigned int vfid) { struct xe_gt_sriov_config *config = pf_pick_vf_config(gt, vfid); + struct xe_device *xe = gt_to_xe(gt); if (!xe_gt_is_media_type(gt)) { pf_release_vf_config_ggtt(gt, config); - pf_release_vf_config_lmem(gt, config); - pf_update_vf_lmtt(gt_to_xe(gt), vfid); + if (IS_DGFX(xe)) { + pf_release_vf_config_lmem(gt, config); + pf_update_vf_lmtt(xe, vfid); + } } pf_release_config_ctxs(gt, config); pf_release_config_dbs(gt, config); -- cgit v1.2.3 From b5e3a9b83f352a737b77a01734a6661d1130ed49 Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Wed, 5 Jun 2024 09:29:48 +0200 Subject: drm/xe: flush engine buffers before signalling user fence on all engines MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Tests show that user fence signalling requires kind of write barrier, otherwise not all writes performed by the workload will be available to userspace. It is already done for render and compute, we need it also for the rest: video, gsc, copy. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by: Andrzej Hajda Reviewed-by: Thomas Hellström Signed-off-by: Matthew Brost Link: https://patchwork.freedesktop.org/patch/msgid/20240605-fix_user_fence_posted-v3-2-06e7932f784a@intel.com (cherry picked from commit 3ad7d18c5dad75ed38098c7cc3bc9594b4701399) Signed-off-by: Thomas Hellström --- drivers/gpu/drm/xe/xe_ring_ops.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/xe/xe_ring_ops.c b/drivers/gpu/drm/xe/xe_ring_ops.c index d42b3f33bd7a..aca7a9af6e84 100644 --- a/drivers/gpu/drm/xe/xe_ring_ops.c +++ b/drivers/gpu/drm/xe/xe_ring_ops.c @@ -80,6 +80,16 @@ static int emit_store_imm_ggtt(u32 addr, u32 value, u32 *dw, int i) return i; } +static int emit_flush_dw(u32 *dw, int i) +{ + dw[i++] = MI_FLUSH_DW | MI_FLUSH_IMM_DW; + dw[i++] = 0; + dw[i++] = 0; + dw[i++] = 0; + + return i; +} + static int emit_flush_imm_ggtt(u32 addr, u32 value, bool invalidate_tlb, u32 *dw, int i) { @@ -234,10 +244,12 @@ static void __emit_job_gen12_simple(struct xe_sched_job *job, struct xe_lrc *lrc i = emit_bb_start(batch_addr, ppgtt_flag, dw, i); - if (job->user_fence.used) + if (job->user_fence.used) { + i = emit_flush_dw(dw, i); i = emit_store_imm_ppgtt_posted(job->user_fence.addr, job->user_fence.value, dw, i); + } i = emit_flush_imm_ggtt(xe_lrc_seqno_ggtt_addr(lrc), seqno, false, dw, i); @@ -293,10 +305,12 @@ static void __emit_job_gen12_video(struct xe_sched_job *job, struct xe_lrc *lrc, i = emit_bb_start(batch_addr, ppgtt_flag, dw, i); - if (job->user_fence.used) + if (job->user_fence.used) { + i = emit_flush_dw(dw, i); i = emit_store_imm_ppgtt_posted(job->user_fence.addr, job->user_fence.value, dw, i); + } i = emit_flush_imm_ggtt(xe_lrc_seqno_ggtt_addr(lrc), seqno, false, dw, i); -- cgit v1.2.3 From 2470b141bfae2b9695b5b6823e3b978b22d33dde Mon Sep 17 00:00:00 2001 From: Riana Tauro Date: Thu, 6 Jun 2024 15:38:42 +0530 Subject: drm/xe: move disable_c6 call MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit disable c6 called in guc_pc_fini_hw is unreachable. GuC PC init returns earlier if skip_guc_pc is true and never registers the finish call thus making disable_c6 unreachable. move this call to gt idle. v2: rebase v3: add fixes tag (Himal) Fixes: 975e4a3795d4 ("drm/xe: Manually setup C6 when skip_guc_pc is set") Signed-off-by: Riana Tauro Reviewed-by: Rodrigo Vivi Link: https://patchwork.freedesktop.org/patch/msgid/20240606100842.956072-3-riana.tauro@intel.com Signed-off-by: Rodrigo Vivi (cherry picked from commit 6800e63cf97bae62bca56d8e691544540d945f53) Signed-off-by: Thomas Hellström --- drivers/gpu/drm/xe/xe_gt_idle.c | 7 +++++++ drivers/gpu/drm/xe/xe_guc_pc.c | 6 ------ 2 files changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/xe/xe_gt_idle.c b/drivers/gpu/drm/xe/xe_gt_idle.c index c699f47f4700..944770fb2daf 100644 --- a/drivers/gpu/drm/xe/xe_gt_idle.c +++ b/drivers/gpu/drm/xe/xe_gt_idle.c @@ -147,6 +147,13 @@ static const struct attribute *gt_idle_attrs[] = { static void gt_idle_sysfs_fini(struct drm_device *drm, void *arg) { struct kobject *kobj = arg; + struct xe_gt *gt = kobj_to_gt(kobj->parent); + + if (gt_to_xe(gt)->info.skip_guc_pc) { + XE_WARN_ON(xe_force_wake_get(gt_to_fw(gt), XE_FW_GT)); + xe_gt_idle_disable_c6(gt); + xe_force_wake_put(gt_to_fw(gt), XE_FW_GT); + } sysfs_remove_files(kobj, gt_idle_attrs); kobject_put(kobj); diff --git a/drivers/gpu/drm/xe/xe_guc_pc.c b/drivers/gpu/drm/xe/xe_guc_pc.c index 509649d0e65e..23382ced4ea7 100644 --- a/drivers/gpu/drm/xe/xe_guc_pc.c +++ b/drivers/gpu/drm/xe/xe_guc_pc.c @@ -895,12 +895,6 @@ int xe_guc_pc_stop(struct xe_guc_pc *pc) static void xe_guc_pc_fini(struct drm_device *drm, void *arg) { struct xe_guc_pc *pc = arg; - struct xe_device *xe = pc_to_xe(pc); - - if (xe->info.skip_guc_pc) { - xe_gt_idle_disable_c6(pc_to_gt(pc)); - return; - } XE_WARN_ON(xe_force_wake_get(gt_to_fw(pc_to_gt(pc)), XE_FORCEWAKE_ALL)); XE_WARN_ON(xe_guc_pc_gucrc_disable(pc)); -- cgit v1.2.3 From 8eef5c3cea65f248c99cd9dcb3f84c6509b78162 Mon Sep 17 00:00:00 2001 From: Sasha Neftin Date: Tue, 11 Jun 2024 09:24:55 -0700 Subject: Revert "igc: fix a log entry using uninitialized netdev" This reverts commit 86167183a17e03ec77198897975e9fdfbd53cb0b. igc_ptp_init() needs to be called before igc_reset(), otherwise kernel crash could be observed. Following the corresponding discussion [1] and [2] revert this commit. Link: https://lore.kernel.org/all/8fb634f8-7330-4cf4-a8ce-485af9c0a61a@intel.com/ [1] Link: https://lore.kernel.org/all/87o78rmkhu.fsf@intel.com/ [2] Fixes: 86167183a17e ("igc: fix a log entry using uninitialized netdev") Signed-off-by: Sasha Neftin Tested-by: Naama Meir Signed-off-by: Tony Nguyen Link: https://lore.kernel.org/r/20240611162456.961631-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/igc/igc_main.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c index 305e05294a26..87b655b839c1 100644 --- a/drivers/net/ethernet/intel/igc/igc_main.c +++ b/drivers/net/ethernet/intel/igc/igc_main.c @@ -7032,6 +7032,8 @@ static int igc_probe(struct pci_dev *pdev, device_set_wakeup_enable(&adapter->pdev->dev, adapter->flags & IGC_FLAG_WOL_SUPPORTED); + igc_ptp_init(adapter); + igc_tsn_clear_schedule(adapter); /* reset the hardware with the new settings */ @@ -7053,9 +7055,6 @@ static int igc_probe(struct pci_dev *pdev, /* Check if Media Autosense is enabled */ adapter->ei = *ei; - /* do hw tstamp init after resetting */ - igc_ptp_init(adapter); - /* print pcie link status and MAC address */ pcie_print_link_status(pdev); netdev_info(netdev, "MAC: %pM\n", netdev->dev_addr); -- cgit v1.2.3 From 79f18a41dd056115d685f3b0a419c7cd40055e13 Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Wed, 12 Jun 2024 06:04:46 +0000 Subject: ionic: fix use after netif_napi_del() When queues are started, netif_napi_add() and napi_enable() are called. If there are 4 queues and only 3 queues are used for the current configuration, only 3 queues' napi should be registered and enabled. The ionic_qcq_enable() checks whether the .poll pointer is not NULL for enabling only the using queue' napi. Unused queues' napi will not be registered by netif_napi_add(), so the .poll pointer indicates NULL. But it couldn't distinguish whether the napi was unregistered or not because netif_napi_del() doesn't reset the .poll pointer to NULL. So, ionic_qcq_enable() calls napi_enable() for the queue, which was unregistered by netif_napi_del(). Reproducer: ethtool -L rx 1 tx 1 combined 0 ethtool -L rx 0 tx 0 combined 1 ethtool -L rx 0 tx 0 combined 4 Splat looks like: kernel BUG at net/core/dev.c:6666! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 1057 Comm: kworker/3:3 Not tainted 6.10.0-rc2+ #16 Workqueue: events ionic_lif_deferred_work [ionic] RIP: 0010:napi_enable+0x3b/0x40 Code: 48 89 c2 48 83 e2 f6 80 b9 61 09 00 00 00 74 0d 48 83 bf 60 01 00 00 00 74 03 80 ce 01 f0 4f RSP: 0018:ffffb6ed83227d48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff97560cda0828 RCX: 0000000000000029 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff97560cda0a28 RBP: ffffb6ed83227d50 R08: 0000000000000400 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: ffff97560ce3c1a0 R14: 0000000000000000 R15: ffff975613ba0a20 FS: 0000000000000000(0000) GS:ffff975d5f780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f734ee200 CR3: 0000000103e50000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: ? die+0x33/0x90 ? do_trap+0xd9/0x100 ? napi_enable+0x3b/0x40 ? do_error_trap+0x83/0xb0 ? napi_enable+0x3b/0x40 ? napi_enable+0x3b/0x40 ? exc_invalid_op+0x4e/0x70 ? napi_enable+0x3b/0x40 ? asm_exc_invalid_op+0x16/0x20 ? napi_enable+0x3b/0x40 ionic_qcq_enable+0xb7/0x180 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_start_queues+0xc4/0x290 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_link_status_check+0x11c/0x170 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_lif_deferred_work+0x129/0x280 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] process_one_work+0x145/0x360 worker_thread+0x2bb/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Taehee Yoo Reviewed-by: Brett Creeley Reviewed-by: Shannon Nelson Link: https://lore.kernel.org/r/20240612060446.1754392-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/pensando/ionic/ionic_lif.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/pensando/ionic/ionic_lif.c b/drivers/net/ethernet/pensando/ionic/ionic_lif.c index 24870da3f484..1934e9d6d9e4 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_lif.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_lif.c @@ -304,10 +304,8 @@ static int ionic_qcq_enable(struct ionic_qcq *qcq) if (ret) return ret; - if (qcq->napi.poll) - napi_enable(&qcq->napi); - if (qcq->flags & IONIC_QCQ_F_INTR) { + napi_enable(&qcq->napi); irq_set_affinity_hint(qcq->intr.vector, &qcq->intr.affinity_mask); ionic_intr_mask(idev->intr_ctrl, qcq->intr.index, -- cgit v1.2.3 From 6f4d93b78ade0a4c2cafd587f7b429ce95abb02e Mon Sep 17 00:00:00 2001 From: Ziwei Xiao Date: Wed, 12 Jun 2024 00:16:54 +0000 Subject: gve: Clear napi->skb before dev_kfree_skb_any() gve_rx_free_skb incorrectly leaves napi->skb referencing an skb after it is freed with dev_kfree_skb_any(). This can result in a subsequent call to napi_get_frags returning a dangling pointer. Fix this by clearing napi->skb before the skb is freed. Fixes: 9b8dd5e5ea48 ("gve: DQO: Add RX path") Cc: stable@vger.kernel.org Reported-by: Shailend Chand Signed-off-by: Ziwei Xiao Reviewed-by: Harshitha Ramamurthy Reviewed-by: Shailend Chand Reviewed-by: Praveen Kaligineedi Link: https://lore.kernel.org/r/20240612001654.923887-1-ziweixiao@google.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/google/gve/gve_rx_dqo.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/google/gve/gve_rx_dqo.c b/drivers/net/ethernet/google/gve/gve_rx_dqo.c index c1c912de59c7..1154c1d8f66f 100644 --- a/drivers/net/ethernet/google/gve/gve_rx_dqo.c +++ b/drivers/net/ethernet/google/gve/gve_rx_dqo.c @@ -647,11 +647,13 @@ static void gve_rx_skb_hash(struct sk_buff *skb, skb_set_hash(skb, le32_to_cpu(compl_desc->hash), hash_type); } -static void gve_rx_free_skb(struct gve_rx_ring *rx) +static void gve_rx_free_skb(struct napi_struct *napi, struct gve_rx_ring *rx) { if (!rx->ctx.skb_head) return; + if (rx->ctx.skb_head == napi->skb) + napi->skb = NULL; dev_kfree_skb_any(rx->ctx.skb_head); rx->ctx.skb_head = NULL; rx->ctx.skb_tail = NULL; @@ -950,7 +952,7 @@ int gve_rx_poll_dqo(struct gve_notify_block *block, int budget) err = gve_rx_dqo(napi, rx, compl_desc, complq->head, rx->q_num); if (err < 0) { - gve_rx_free_skb(rx); + gve_rx_free_skb(napi, rx); u64_stats_update_begin(&rx->statss); if (err == -ENOMEM) rx->rx_skb_alloc_fail++; @@ -993,7 +995,7 @@ int gve_rx_poll_dqo(struct gve_notify_block *block, int budget) /* gve_rx_complete_skb() will consume skb if successful */ if (gve_rx_complete_skb(rx, napi, compl_desc, feat) != 0) { - gve_rx_free_skb(rx); + gve_rx_free_skb(napi, rx); u64_stats_update_begin(&rx->statss); rx->rx_desc_err_dropped_pkt++; u64_stats_update_end(&rx->statss); -- cgit v1.2.3 From 7d9df38c9c037ab84502ce7eeae9f1e1e7e72603 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Wed, 12 Jun 2024 16:17:36 -0700 Subject: bnxt_en: Cap the size of HWRM_PORT_PHY_QCFG forwarded response Firmware interface 1.10.2.118 has increased the size of HWRM_PORT_PHY_QCFG response beyond the maximum size that can be forwarded. When the VF's link state is not the default auto state, the PF will need to forward the response back to the VF to indicate the forced state. This regression may cause the VF to fail to initialize. Fix it by capping the HWRM_PORT_PHY_QCFG response to the maximum 96 bytes. The SPEEDS2_SUPPORTED flag needs to be cleared because the new speeds2 fields are beyond the legacy structure. Also modify bnxt_hwrm_fwd_resp() to print a warning if the message size exceeds 96 bytes to make this failure more obvious. Fixes: 84a911db8305 ("bnxt_en: Update firmware interface to 1.10.2.118") Reviewed-by: Somnath Kotur Reviewed-by: Pavan Chebbi Signed-off-by: Michael Chan Link: https://lore.kernel.org/r/20240612231736.57823-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/bnxt/bnxt.h | 51 +++++++++++++++++++++++++ drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c | 12 +++++- 2 files changed, 61 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h index 656ab81c0272..bbc7edccd5a4 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h @@ -1434,6 +1434,57 @@ struct bnxt_l2_filter { atomic_t refcnt; }; +/* Compat version of hwrm_port_phy_qcfg_output capped at 96 bytes. The + * first 95 bytes are identical to hwrm_port_phy_qcfg_output in bnxt_hsi.h. + * The last valid byte in the compat version is different. + */ +struct hwrm_port_phy_qcfg_output_compat { + __le16 error_code; + __le16 req_type; + __le16 seq_id; + __le16 resp_len; + u8 link; + u8 active_fec_signal_mode; + __le16 link_speed; + u8 duplex_cfg; + u8 pause; + __le16 support_speeds; + __le16 force_link_speed; + u8 auto_mode; + u8 auto_pause; + __le16 auto_link_speed; + __le16 auto_link_speed_mask; + u8 wirespeed; + u8 lpbk; + u8 force_pause; + u8 module_status; + __le32 preemphasis; + u8 phy_maj; + u8 phy_min; + u8 phy_bld; + u8 phy_type; + u8 media_type; + u8 xcvr_pkg_type; + u8 eee_config_phy_addr; + u8 parallel_detect; + __le16 link_partner_adv_speeds; + u8 link_partner_adv_auto_mode; + u8 link_partner_adv_pause; + __le16 adv_eee_link_speed_mask; + __le16 link_partner_adv_eee_link_speed_mask; + __le32 xcvr_identifier_type_tx_lpi_timer; + __le16 fec_cfg; + u8 duplex_state; + u8 option_flags; + char phy_vendor_name[16]; + char phy_vendor_partnumber[16]; + __le16 support_pam4_speeds; + __le16 force_pam4_link_speed; + __le16 auto_pam4_link_speed_mask; + u8 link_partner_pam4_adv_speeds; + u8 valid; +}; + struct bnxt_link_info { u8 phy_type; u8 media_type; diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c index 175192ebaa77..22898d3d088b 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c @@ -950,8 +950,11 @@ static int bnxt_hwrm_fwd_resp(struct bnxt *bp, struct bnxt_vf_info *vf, struct hwrm_fwd_resp_input *req; int rc; - if (BNXT_FWD_RESP_SIZE_ERR(msg_size)) + if (BNXT_FWD_RESP_SIZE_ERR(msg_size)) { + netdev_warn_once(bp->dev, "HWRM fwd response too big (%d bytes)\n", + msg_size); return -EINVAL; + } rc = hwrm_req_init(bp, req, HWRM_FWD_RESP); if (!rc) { @@ -1085,7 +1088,7 @@ static int bnxt_vf_set_link(struct bnxt *bp, struct bnxt_vf_info *vf) rc = bnxt_hwrm_exec_fwd_resp( bp, vf, sizeof(struct hwrm_port_phy_qcfg_input)); } else { - struct hwrm_port_phy_qcfg_output phy_qcfg_resp = {0}; + struct hwrm_port_phy_qcfg_output_compat phy_qcfg_resp = {}; struct hwrm_port_phy_qcfg_input *phy_qcfg_req; phy_qcfg_req = @@ -1096,6 +1099,11 @@ static int bnxt_vf_set_link(struct bnxt *bp, struct bnxt_vf_info *vf) mutex_unlock(&bp->link_lock); phy_qcfg_resp.resp_len = cpu_to_le16(sizeof(phy_qcfg_resp)); phy_qcfg_resp.seq_id = phy_qcfg_req->seq_id; + /* New SPEEDS2 fields are beyond the legacy structure, so + * clear the SPEEDS2_SUPPORTED flag. + */ + phy_qcfg_resp.option_flags &= + ~PORT_PHY_QCAPS_RESP_FLAGS2_SPEEDS2_SUPPORTED; phy_qcfg_resp.valid = 1; if (vf->flags & BNXT_VF_LINK_UP) { -- cgit v1.2.3 From a9b9741854a9fe9df948af49ca5514e0ed0429df Mon Sep 17 00:00:00 2001 From: Aleksandr Mishin Date: Tue, 11 Jun 2024 11:25:46 +0300 Subject: bnxt_en: Adjust logging of firmware messages in case of released token in __hwrm_send() In case of token is released due to token->state == BNXT_HWRM_DEFERRED, released token (set to NULL) is used in log messages. This issue is expected to be prevented by HWRM_ERR_CODE_PF_UNAVAILABLE error code. But this error code is returned by recent firmware. So some firmware may not return it. This may lead to NULL pointer dereference. Adjust this issue by adding token pointer check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 8fa4219dba8e ("bnxt_en: add dynamic debug support for HWRM messages") Suggested-by: Michael Chan Signed-off-by: Aleksandr Mishin Reviewed-by: Wojciech Drewek Reviewed-by: Michael Chan Link: https://lore.kernel.org/r/20240611082547.12178-1-amishin@t-argos.ru Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c index 1df3d56cc4b5..d2fd2d04ed47 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c @@ -680,7 +680,7 @@ static int __hwrm_send(struct bnxt *bp, struct bnxt_hwrm_ctx *ctx) req_type); else if (rc && rc != HWRM_ERR_CODE_PF_UNAVAILABLE) hwrm_err(bp, ctx, "hwrm req_type 0x%x seq id 0x%x error 0x%x\n", - req_type, token->seq_id, rc); + req_type, le16_to_cpu(ctx->req->seq_id), rc); rc = __hwrm_to_stderr(rc); exit: if (token) -- cgit v1.2.3 From ff0ffe5b7c3c12c6e0cca16652905963ae817b44 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Thu, 13 Jun 2024 09:36:50 -0700 Subject: nvme: fix namespace removal list This function wants to move a subset of a list from one element to the tail into another list. It also needs to use the srcu synchronize instead of the regular rcu version. Do this one element at a time because that's the only to do it. Fixes: be647e2c76b27f4 ("nvme: use srcu for iterating namespace list") Reported-by: Venkat Rao Bagalkote Tested-by: Venkat Rao Bagalkote Signed-off-by: Keith Busch --- drivers/nvme/host/core.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index c40930d10bd3..782090ce0bc1 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -3960,12 +3960,13 @@ static void nvme_remove_invalid_namespaces(struct nvme_ctrl *ctrl, mutex_lock(&ctrl->namespaces_lock); list_for_each_entry_safe(ns, next, &ctrl->namespaces, list) { - if (ns->head->ns_id > nsid) - list_splice_init_rcu(&ns->list, &rm_list, - synchronize_rcu); + if (ns->head->ns_id > nsid) { + list_del_rcu(&ns->list); + synchronize_srcu(&ctrl->srcu); + list_add_tail_rcu(&ns->list, &rm_list); + } } mutex_unlock(&ctrl->namespaces_lock); - synchronize_srcu(&ctrl->srcu); list_for_each_entry_safe(ns, next, &rm_list, list) nvme_ns_remove(ns); -- cgit v1.2.3 From 22f00812862564b314784167a89f27b444f82a46 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 13 Jun 2024 21:30:43 -0400 Subject: USB: class: cdc-wdm: Fix CPU lockup caused by excessive log messages The syzbot fuzzer found that the interrupt-URB completion callback in the cdc-wdm driver was taking too long, and the driver's immediate resubmission of interrupt URBs with -EPROTO status combined with the dummy-hcd emulation to cause a CPU lockup: cdc_wdm 1-1:1.0: nonzero urb status received: -71 cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625] CPU#0 Utilization every 4s during lockup: #1: 98% system, 0% softirq, 3% hardirq, 0% idle #2: 98% system, 0% softirq, 3% hardirq, 0% idle #3: 98% system, 0% softirq, 3% hardirq, 0% idle #4: 98% system, 0% softirq, 3% hardirq, 0% idle #5: 98% system, 1% softirq, 3% hardirq, 0% idle Modules linked in: irq event stamp: 73096 hardirqs last enabled at (73095): [] console_emit_next_record kernel/printk/printk.c:2935 [inline] hardirqs last enabled at (73095): [] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994 hardirqs last disabled at (73096): [] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (73096): [] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (73048): [] softirq_handle_end kernel/softirq.c:400 [inline] softirqs last enabled at (73048): [] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582 softirqs last disabled at (73043): [] __do_softirq+0x14/0x20 kernel/softirq.c:588 CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Testing showed that the problem did not occur if the two error messages -- the first two lines above -- were removed; apparently adding material to the kernel log takes a surprisingly large amount of time. In any case, the best approach for preventing these lockups and to avoid spamming the log with thousands of error messages per second is to ratelimit the two dev_err() calls. Therefore we replace them with dev_err_ratelimited(). Signed-off-by: Alan Stern Suggested-by: Greg KH Reported-and-tested-by: syzbot+5f996b83575ef4058638@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/00000000000073d54b061a6a1c65@google.com/ Reported-and-tested-by: syzbot+1b2abad17596ad03dcff@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/000000000000f45085061aa9b37e@google.com/ Fixes: 9908a32e94de ("USB: remove err() macro from usb class drivers") Link: https://lore.kernel.org/linux-usb/40dfa45b-5f21-4eef-a8c1-51a2f320e267@rowland.harvard.edu/ Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/29855215-52f5-4385-b058-91f42c2bee18@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-wdm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index c553decb5461..6830be4419e2 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -266,14 +266,14 @@ static void wdm_int_callback(struct urb *urb) dev_err(&desc->intf->dev, "Stall on int endpoint\n"); goto sw; /* halt is cleared in work */ default: - dev_err(&desc->intf->dev, + dev_err_ratelimited(&desc->intf->dev, "nonzero urb status received: %d\n", status); break; } } if (urb->actual_length < sizeof(struct usb_cdc_notification)) { - dev_err(&desc->intf->dev, "wdm_int_callback - %d bytes\n", + dev_err_ratelimited(&desc->intf->dev, "wdm_int_callback - %d bytes\n", urb->actual_length); goto exit; } -- cgit v1.2.3 From 41f590e31c6c8b8a0a490b7c1ad2e57c20ec3d9b Mon Sep 17 00:00:00 2001 From: pengfuyuan Date: Thu, 6 Jun 2024 20:08:42 +0800 Subject: arm/komeda: Remove all CONFIG_DEBUG_FS conditional compilations Since the debugfs functions have no-op stubs for CONFIG_DEBUG_FS=n, the compiler will optimize the rest away since they are no longer referenced. The benefit of removing the conditional compilation is that the build is actually tested for both CONFIG_DEBUG_FS configuration values. Assuming most developers have it enabled, CONFIG_DEBUG_FS=n is not tested much and may fail the build due to the conditional compilation. Reported-by: k2ci Signed-off-by: pengfuyuan Acked-by: Liviu Dudau Link: https://patchwork.freedesktop.org/patch/msgid/20240606120842.1377267-1-pengfuyuan@kylinos.cn Signed-off-by: Liviu Dudau Signed-off-by: Maxime Ripard --- drivers/gpu/drm/arm/display/komeda/komeda_dev.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_dev.c b/drivers/gpu/drm/arm/display/komeda/komeda_dev.c index 14ee79becacb..5ba62e637a61 100644 --- a/drivers/gpu/drm/arm/display/komeda/komeda_dev.c +++ b/drivers/gpu/drm/arm/display/komeda/komeda_dev.c @@ -12,10 +12,8 @@ #include #include #include -#ifdef CONFIG_DEBUG_FS #include #include -#endif #include @@ -43,7 +41,6 @@ static int komeda_register_show(struct seq_file *sf, void *x) DEFINE_SHOW_ATTRIBUTE(komeda_register); -#ifdef CONFIG_DEBUG_FS static void komeda_debugfs_init(struct komeda_dev *mdev) { if (!debugfs_initialized()) @@ -55,7 +52,6 @@ static void komeda_debugfs_init(struct komeda_dev *mdev) debugfs_create_x16("err_verbosity", 0664, mdev->debugfs_root, &mdev->err_verbosity); } -#endif static ssize_t core_id_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -265,9 +261,7 @@ struct komeda_dev *komeda_dev_create(struct device *dev) mdev->err_verbosity = KOMEDA_DEV_PRINT_ERR_EVENTS; -#ifdef CONFIG_DEBUG_FS komeda_debugfs_init(mdev); -#endif return mdev; @@ -286,9 +280,7 @@ void komeda_dev_destroy(struct komeda_dev *mdev) sysfs_remove_group(&dev->kobj, &komeda_sysfs_attr_group); -#ifdef CONFIG_DEBUG_FS debugfs_remove_recursive(mdev->debugfs_root); -#endif if (mdev->aclk) clk_prepare_enable(mdev->aclk); -- cgit v1.2.3 From a6a75edc8669a4f030546c7390808ef0cc034742 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Thu, 13 Jun 2024 19:33:53 +0200 Subject: ata: libata-scsi: Set the RMB bit only for removable media devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The SCSI Removable Media Bit (RMB) should only be set for removable media, where the device stays and the media changes, e.g. CD-ROM or floppy. The ATA removable media device bit is obsoleted since ATA-8 ACS (2006), but before that it was used to indicate that the device can have its media removed (while the device stays). Commit 8a3e33cf92c7 ("ata: ahci: find eSATA ports and flag them as removable") introduced a change to set the RMB bit if the port has either the eSATA bit or the hot-plug capable bit set. The reasoning was that the author wanted his eSATA ports to get treated like a USB stick. This is however wrong. See "20-082r23SPC-6: Removable Medium Bit Expectations" which has since been integrated to SPC, which states that: """ Reports have been received that some USB Memory Stick device servers set the removable medium (RMB) bit to one. The rub comes when the medium is actually removed, because... The device server is removed concurrently with the medium removal. If there is no device server, then there is no device server that is waiting to have removable medium inserted. Sufficient numbers of SCSI analysts see such a device: - not as a device that supports removable medium; but - as a removable, hot pluggable device. """ The definition of the RMB bit in the SPC specification has since been clarified to match this. Thus, a USB stick should not have the RMB bit set (and neither shall an eSATA nor a hot-plug capable port). Commit dc8b4afc4a04 ("ata: ahci: don't mark HotPlugCapable Ports as external/removable") then changed so that the RMB bit is only set for the eSATA bit (and not for the hot-plug capable bit), because of a lot of bug reports of SATA devices were being automounted by udisks. However, treating eSATA and hot-plug capable ports differently is not correct. From the AHCI 1.3.1 spec: Hot Plug Capable Port (HPCP): When set to '1', indicates that this port's signal and power connectors are externally accessible via a joint signal and power connector for blindmate device hot plug. So a hot-plug capable port is an external port, just like commit 45b96d65ec68 ("ata: ahci: a hotplug capable port is an external port") claims. In order to not violate the SPC specification, modify the SCSI INQUIRY data to only set the RMB bit if the ATA device can have its media removed. This fixes a reported problem where GNOME/udisks was automounting devices connected to hot-plug capable ports. Fixes: 45b96d65ec68 ("ata: ahci: a hotplug capable port is an external port") Cc: stable@vger.kernel.org Reviewed-by: Mario Limonciello Reviewed-by: Thomas Weißschuh Tested-by: Thomas Weißschuh Reported-by: Thomas Weißschuh Closes: https://lore.kernel.org/linux-ide/c0de8262-dc4b-4c22-9fac-33432e5bddd3@t-8ch.de/ Signed-off-by: Damien Le Moal [cassel: wrote commit message] Signed-off-by: Niklas Cassel --- drivers/ata/libata-scsi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index cdf29b178ddc..bb4d30d377ae 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1831,11 +1831,11 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf) 2 }; - /* set scsi removable (RMB) bit per ata bit, or if the - * AHCI port says it's external (Hotplug-capable, eSATA). + /* + * Set the SCSI Removable Media Bit (RMB) if the ATA removable media + * device bit (obsolete since ATA-8 ACS) is set. */ - if (ata_id_removable(args->id) || - (args->dev->link->ap->pflags & ATA_PFLAG_EXTERNAL)) + if (ata_id_removable(args->id)) hdr[1] |= (1 << 7); if (args->dev->class == ATA_DEV_ZAC) { -- cgit v1.2.3 From 5f75e081ab5cbfbe7aca2112a802e69576ee9778 Mon Sep 17 00:00:00 2001 From: Cyril Hrubis Date: Thu, 13 Jun 2024 18:38:17 +0200 Subject: loop: Disable fallocate() zero and discard if not supported If fallcate is implemented but zero and discard operations are not supported by the filesystem the backing file is on we continue to fill dmesg with errors from the blk_mq_end_request() since each time we call fallocate() on the loop device the EOPNOTSUPP error from lo_fallocate() ends up propagated into the block layer. In the end syscall succeeds since the blkdev_issue_zeroout() falls back to writing zeroes which makes the errors even more misleading and confusing. How to reproduce: 1. make sure /tmp is mounted as tmpfs 2. dd if=/dev/zero of=/tmp/disk.img bs=1M count=100 3. losetup /dev/loop0 /tmp/disk.img 4. mkfs.ext2 /dev/loop0 5. dmesg |tail [710690.898214] operation not supported error, dev loop0, sector 204672 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0 [710690.898279] operation not supported error, dev loop0, sector 522 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0 [710690.898603] operation not supported error, dev loop0, sector 16906 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0 [710690.898917] operation not supported error, dev loop0, sector 32774 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0 [710690.899218] operation not supported error, dev loop0, sector 49674 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0 [710690.899484] operation not supported error, dev loop0, sector 65542 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0 [710690.899743] operation not supported error, dev loop0, sector 82442 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0 [710690.900015] operation not supported error, dev loop0, sector 98310 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0 [710690.900276] operation not supported error, dev loop0, sector 115210 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0 [710690.900546] operation not supported error, dev loop0, sector 131078 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0 This patch changes the lo_fallocate() to clear the flags for zero and discard operations if we get EOPNOTSUPP from the backing file fallocate callback, that way we at least stop spewing errors after the first unsuccessful try. CC: Jan Kara Signed-off-by: Cyril Hrubis Reviewed-by: Christoph Hellwig Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20240613163817.22640-1-chrubis@suse.cz Signed-off-by: Jens Axboe --- drivers/block/loop.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'drivers') diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 93780f41646b..1153721bc7c2 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -302,6 +302,21 @@ static int lo_read_simple(struct loop_device *lo, struct request *rq, return 0; } +static void loop_clear_limits(struct loop_device *lo, int mode) +{ + struct queue_limits lim = queue_limits_start_update(lo->lo_queue); + + if (mode & FALLOC_FL_ZERO_RANGE) + lim.max_write_zeroes_sectors = 0; + + if (mode & FALLOC_FL_PUNCH_HOLE) { + lim.max_hw_discard_sectors = 0; + lim.discard_granularity = 0; + } + + queue_limits_commit_update(lo->lo_queue, &lim); +} + static int lo_fallocate(struct loop_device *lo, struct request *rq, loff_t pos, int mode) { @@ -320,6 +335,14 @@ static int lo_fallocate(struct loop_device *lo, struct request *rq, loff_t pos, ret = file->f_op->fallocate(file, mode, pos, blk_rq_bytes(rq)); if (unlikely(ret && ret != -EINVAL && ret != -EOPNOTSUPP)) return -EIO; + + /* + * We initially configure the limits in a hope that fallocate is + * supported and clear them here if that turns out not to be true. + */ + if (unlikely(ret == -EOPNOTSUPP)) + loop_clear_limits(lo, mode); + return ret; } -- cgit v1.2.3 From e789523fe248a80839f8dfe736ca96e5c442a9e8 Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Thu, 13 Jun 2024 18:03:43 +0900 Subject: firewire: fix website URL in Kconfig The wiki in kernel.org is no longer updated. This commit replaces the website URL with the latest one. Link: https://lore.kernel.org/r/20240613090343.416198-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto --- drivers/firewire/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig index 869598b20e3a..5268b3f0a25a 100644 --- a/drivers/firewire/Kconfig +++ b/drivers/firewire/Kconfig @@ -11,7 +11,7 @@ config FIREWIRE This is the new-generation IEEE 1394 (FireWire) driver stack a.k.a. Juju, a new implementation designed for robustness and simplicity. - See http://ieee1394.wiki.kernel.org/index.php/Juju_Migration + See http://ieee1394.docs.kernel.org/en/latest/migration.html for information about migration from the older Linux 1394 stack to the new driver stack. -- cgit v1.2.3 From e7da16abf030b39c3598574d5457f324a6f0e4a7 Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Thu, 13 Jun 2024 22:14:33 +0900 Subject: firewire: core: record card index in tracepoinrts events derived from async_outbound_complete_template The asynchronous transaction is initiated on one of 1394 OHCI controller, however the existing tracepoints events has the lack of data about it. This commit adds card_index member into event structure to store the index of host controller in use, and prints it. Link: https://lore.kernel.org/r/20240613131440.431766-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto --- drivers/firewire/core-transaction.c | 6 +++--- include/trace/events/firewire.h | 17 ++++++++++------- 2 files changed, 13 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/firewire/core-transaction.c b/drivers/firewire/core-transaction.c index 571fdff65c2b..de75e758fd07 100644 --- a/drivers/firewire/core-transaction.c +++ b/drivers/firewire/core-transaction.c @@ -174,8 +174,8 @@ static void transmit_complete_callback(struct fw_packet *packet, struct fw_transaction *t = container_of(packet, struct fw_transaction, packet); - trace_async_request_outbound_complete((uintptr_t)t, packet->generation, packet->speed, - status, packet->timestamp); + trace_async_request_outbound_complete((uintptr_t)t, card->index, packet->generation, + packet->speed, status, packet->timestamp); switch (status) { case ACK_COMPLETE: @@ -674,7 +674,7 @@ static void free_response_callback(struct fw_packet *packet, { struct fw_request *request = container_of(packet, struct fw_request, response); - trace_async_response_outbound_complete((uintptr_t)request, packet->generation, + trace_async_response_outbound_complete((uintptr_t)request, card->index, packet->generation, packet->speed, status, packet->timestamp); // Decrease the reference count since not at in-flight. diff --git a/include/trace/events/firewire.h b/include/trace/events/firewire.h index d695a560673f..ca6ea9bd1eba 100644 --- a/include/trace/events/firewire.h +++ b/include/trace/events/firewire.h @@ -71,10 +71,11 @@ DECLARE_EVENT_CLASS(async_outbound_initiate_template, // The value of status is one of ack codes and rcodes specific to Linux FireWire subsystem. DECLARE_EVENT_CLASS(async_outbound_complete_template, - TP_PROTO(u64 transaction, unsigned int generation, unsigned int scode, unsigned int status, unsigned int timestamp), - TP_ARGS(transaction, generation, scode, status, timestamp), + TP_PROTO(u64 transaction, unsigned int card_index, unsigned int generation, unsigned int scode, unsigned int status, unsigned int timestamp), + TP_ARGS(transaction, card_index, generation, scode, status, timestamp), TP_STRUCT__entry( __field(u64, transaction) + __field(u8, card_index) __field(u8, generation) __field(u8, scode) __field(u8, status) @@ -82,14 +83,16 @@ DECLARE_EVENT_CLASS(async_outbound_complete_template, ), TP_fast_assign( __entry->transaction = transaction; + __entry->card_index = card_index; __entry->generation = generation; __entry->scode = scode; __entry->status = status; __entry->timestamp = timestamp; ), TP_printk( - "transaction=0x%llx generation=%u scode=%u status=%u timestamp=0x%04x", + "transaction=0x%llx card_index=%u generation=%u scode=%u status=%u timestamp=0x%04x", __entry->transaction, + __entry->card_index, __entry->generation, __entry->scode, __entry->status, @@ -144,8 +147,8 @@ DEFINE_EVENT(async_outbound_initiate_template, async_request_outbound_initiate, ); DEFINE_EVENT(async_outbound_complete_template, async_request_outbound_complete, - TP_PROTO(u64 transaction, unsigned int generation, unsigned int scode, unsigned int status, unsigned int timestamp), - TP_ARGS(transaction, generation, scode, status, timestamp) + TP_PROTO(u64 transaction, unsigned int card_index, unsigned int generation, unsigned int scode, unsigned int status, unsigned int timestamp), + TP_ARGS(transaction, card_index, generation, scode, status, timestamp) ); DEFINE_EVENT(async_inbound_template, async_response_inbound, @@ -194,8 +197,8 @@ DEFINE_EVENT_PRINT(async_outbound_initiate_template, async_response_outbound_ini ); DEFINE_EVENT(async_outbound_complete_template, async_response_outbound_complete, - TP_PROTO(u64 transaction, unsigned int generation, unsigned int scode, unsigned int status, unsigned int timestamp), - TP_ARGS(transaction, generation, scode, status, timestamp) + TP_PROTO(u64 transaction, unsigned int card_index, unsigned int generation, unsigned int scode, unsigned int status, unsigned int timestamp), + TP_ARGS(transaction, card_index, generation, scode, status, timestamp) ); #undef ASYNC_HEADER_GET_DESTINATION -- cgit v1.2.3 From 64e02b64fb1d832a9a5254055a829db64750421a Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Thu, 13 Jun 2024 22:14:34 +0900 Subject: firewire: core: record card index in tracepoinrts events derived from async_outbound_initiate_template The asynchronous transaction is initiated on one of 1394 OHCI controller, however the existing tracepoints events has the lack of data about it. This commit adds card_index member into event structure to store the index of host controller in use, and prints it. Link: https://lore.kernel.org/r/20240613131440.431766-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto --- drivers/firewire/core-transaction.c | 10 ++++++---- include/trace/events/firewire.h | 20 ++++++++++++-------- 2 files changed, 18 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/firewire/core-transaction.c b/drivers/firewire/core-transaction.c index de75e758fd07..3f9361d15607 100644 --- a/drivers/firewire/core-transaction.c +++ b/drivers/firewire/core-transaction.c @@ -398,7 +398,8 @@ void __fw_send_request(struct fw_card *card, struct fw_transaction *t, int tcode spin_unlock_irqrestore(&card->lock, flags); - trace_async_request_outbound_initiate((uintptr_t)t, generation, speed, t->packet.header, payload, + trace_async_request_outbound_initiate((uintptr_t)t, card->index, generation, speed, + t->packet.header, payload, tcode_is_read_request(tcode) ? 0 : length / 4); card->driver->send_request(card, &t->packet); @@ -879,9 +880,10 @@ void fw_send_response(struct fw_card *card, // Increase the reference count so that the object is kept during in-flight. fw_request_get(request); - trace_async_response_outbound_initiate((uintptr_t)request, request->response.generation, - request->response.speed, request->response.header, - data, data ? data_length / 4 : 0); + trace_async_response_outbound_initiate((uintptr_t)request, card->index, + request->response.generation, request->response.speed, + request->response.header, data, + data ? data_length / 4 : 0); card->driver->send_response(card, &request->response); } diff --git a/include/trace/events/firewire.h b/include/trace/events/firewire.h index ca6ea9bd1eba..a3d9916cbad1 100644 --- a/include/trace/events/firewire.h +++ b/include/trace/events/firewire.h @@ -36,10 +36,11 @@ #define QUADLET_SIZE 4 DECLARE_EVENT_CLASS(async_outbound_initiate_template, - TP_PROTO(u64 transaction, unsigned int generation, unsigned int scode, const u32 *header, const u32 *data, unsigned int data_count), - TP_ARGS(transaction, generation, scode, header, data, data_count), + TP_PROTO(u64 transaction, unsigned int card_index, unsigned int generation, unsigned int scode, const u32 *header, const u32 *data, unsigned int data_count), + TP_ARGS(transaction, card_index, generation, scode, header, data, data_count), TP_STRUCT__entry( __field(u64, transaction) + __field(u8, card_index) __field(u8, generation) __field(u8, scode) __array(u32, header, ASYNC_HEADER_QUADLET_COUNT) @@ -47,6 +48,7 @@ DECLARE_EVENT_CLASS(async_outbound_initiate_template, ), TP_fast_assign( __entry->transaction = transaction; + __entry->card_index = card_index; __entry->generation = generation; __entry->scode = scode; memcpy(__entry->header, header, QUADLET_SIZE * ASYNC_HEADER_QUADLET_COUNT); @@ -54,8 +56,9 @@ DECLARE_EVENT_CLASS(async_outbound_initiate_template, ), // This format is for the request subaction. TP_printk( - "transaction=0x%llx generation=%u scode=%u dst_id=0x%04x tlabel=%u tcode=%u src_id=0x%04x offset=0x%012llx header=%s data=%s", + "transaction=0x%llx card_index=%u generation=%u scode=%u dst_id=0x%04x tlabel=%u tcode=%u src_id=0x%04x offset=0x%012llx header=%s data=%s", __entry->transaction, + __entry->card_index, __entry->generation, __entry->scode, ASYNC_HEADER_GET_DESTINATION(__entry->header), @@ -142,8 +145,8 @@ DECLARE_EVENT_CLASS(async_inbound_template, ); DEFINE_EVENT(async_outbound_initiate_template, async_request_outbound_initiate, - TP_PROTO(u64 transaction, unsigned int generation, unsigned int scode, const u32 *header, const u32 *data, unsigned int data_count), - TP_ARGS(transaction, generation, scode, header, data, data_count) + TP_PROTO(u64 transaction, unsigned int card_index, unsigned int generation, unsigned int scode, const u32 *header, const u32 *data, unsigned int data_count), + TP_ARGS(transaction, card_index, generation, scode, header, data, data_count) ); DEFINE_EVENT(async_outbound_complete_template, async_request_outbound_complete, @@ -178,11 +181,12 @@ DEFINE_EVENT_PRINT(async_inbound_template, async_request_inbound, ); DEFINE_EVENT_PRINT(async_outbound_initiate_template, async_response_outbound_initiate, - TP_PROTO(u64 transaction, unsigned int generation, unsigned int scode, const u32 *header, const u32 *data, unsigned int data_count), - TP_ARGS(transaction, generation, scode, header, data, data_count), + TP_PROTO(u64 transaction, unsigned int card_index, unsigned int generation, unsigned int scode, const u32 *header, const u32 *data, unsigned int data_count), + TP_ARGS(transaction, card_index, generation, scode, header, data, data_count), TP_printk( - "transaction=0x%llx generation=%u scode=%u dst_id=0x%04x tlabel=%u tcode=%u src_id=0x%04x rcode=%u header=%s data=%s", + "transaction=0x%llx card_index=%u generation=%u scode=%u dst_id=0x%04x tlabel=%u tcode=%u src_id=0x%04x rcode=%u header=%s data=%s", __entry->transaction, + __entry->card_index, __entry->generation, __entry->scode, ASYNC_HEADER_GET_DESTINATION(__entry->header), -- cgit v1.2.3 From 65ec7ebefe7de01281cce1f552ebd4dd00386665 Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Thu, 13 Jun 2024 22:14:35 +0900 Subject: firewire: core: record card index in tracepoinrts events derived from async_inbound_template The asynchronous transaction is initiated on one of 1394 OHCI controller, however the existing tracepoints events has the lack of data about it. This commit adds card_index member into event structure to store the index of host controller in use, and prints it. Link: https://lore.kernel.org/r/20240613131440.431766-4-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto --- drivers/firewire/core-transaction.c | 8 ++++---- include/trace/events/firewire.h | 20 ++++++++++++-------- 2 files changed, 16 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/firewire/core-transaction.c b/drivers/firewire/core-transaction.c index 3f9361d15607..3503c238f8ae 100644 --- a/drivers/firewire/core-transaction.c +++ b/drivers/firewire/core-transaction.c @@ -1009,8 +1009,8 @@ void fw_core_handle_request(struct fw_card *card, struct fw_packet *p) return; } - trace_async_request_inbound((uintptr_t)request, p->generation, p->speed, p->ack, - p->timestamp, p->header, request->data, + trace_async_request_inbound((uintptr_t)request, card->index, p->generation, p->speed, + p->ack, p->timestamp, p->header, request->data, tcode_is_read_request(tcode) ? 0 : request->length / 4); offset = async_header_get_offset(p->header); @@ -1080,8 +1080,8 @@ void fw_core_handle_response(struct fw_card *card, struct fw_packet *p) } spin_unlock_irqrestore(&card->lock, flags); - trace_async_response_inbound((uintptr_t)t, p->generation, p->speed, p->ack, p->timestamp, - p->header, data, data_length / 4); + trace_async_response_inbound((uintptr_t)t, card->index, p->generation, p->speed, p->ack, + p->timestamp, p->header, data, data_length / 4); if (!t) { timed_out: diff --git a/include/trace/events/firewire.h b/include/trace/events/firewire.h index a3d9916cbad1..b72f613cfa02 100644 --- a/include/trace/events/firewire.h +++ b/include/trace/events/firewire.h @@ -105,10 +105,11 @@ DECLARE_EVENT_CLASS(async_outbound_complete_template, // The value of status is one of ack codes and rcodes specific to Linux FireWire subsystem. DECLARE_EVENT_CLASS(async_inbound_template, - TP_PROTO(u64 transaction, unsigned int generation, unsigned int scode, unsigned int status, unsigned int timestamp, const u32 *header, const u32 *data, unsigned int data_count), - TP_ARGS(transaction, generation, scode, status, timestamp, header, data, data_count), + TP_PROTO(u64 transaction, unsigned int card_index, unsigned int generation, unsigned int scode, unsigned int status, unsigned int timestamp, const u32 *header, const u32 *data, unsigned int data_count), + TP_ARGS(transaction, card_index, generation, scode, status, timestamp, header, data, data_count), TP_STRUCT__entry( __field(u64, transaction) + __field(u8, card_index) __field(u8, generation) __field(u8, scode) __field(u8, status) @@ -118,6 +119,7 @@ DECLARE_EVENT_CLASS(async_inbound_template, ), TP_fast_assign( __entry->transaction = transaction; + __entry->card_index = card_index; __entry->generation = generation; __entry->scode = scode; __entry->status = status; @@ -127,8 +129,9 @@ DECLARE_EVENT_CLASS(async_inbound_template, ), // This format is for the response subaction. TP_printk( - "transaction=0x%llx generation=%u scode=%u status=%u timestamp=0x%04x dst_id=0x%04x tlabel=%u tcode=%u src_id=0x%04x rcode=%u header=%s data=%s", + "transaction=0x%llx card_index=%u generation=%u scode=%u status=%u timestamp=0x%04x dst_id=0x%04x tlabel=%u tcode=%u src_id=0x%04x rcode=%u header=%s data=%s", __entry->transaction, + __entry->card_index, __entry->generation, __entry->scode, __entry->status, @@ -155,16 +158,17 @@ DEFINE_EVENT(async_outbound_complete_template, async_request_outbound_complete, ); DEFINE_EVENT(async_inbound_template, async_response_inbound, - TP_PROTO(u64 transaction, unsigned int generation, unsigned int scode, unsigned int status, unsigned int timestamp, const u32 *header, const u32 *data, unsigned int data_count), - TP_ARGS(transaction, generation, scode, status, timestamp, header, data, data_count) + TP_PROTO(u64 transaction, unsigned int card_index, unsigned int generation, unsigned int scode, unsigned int status, unsigned int timestamp, const u32 *header, const u32 *data, unsigned int data_count), + TP_ARGS(transaction, card_index, generation, scode, status, timestamp, header, data, data_count) ); DEFINE_EVENT_PRINT(async_inbound_template, async_request_inbound, - TP_PROTO(u64 transaction, unsigned int generation, unsigned int scode, unsigned int status, unsigned int timestamp, const u32 *header, const u32 *data, unsigned int data_count), - TP_ARGS(transaction, generation, scode, status, timestamp, header, data, data_count), + TP_PROTO(u64 transaction, unsigned int card_index, unsigned int generation, unsigned int scode, unsigned int status, unsigned int timestamp, const u32 *header, const u32 *data, unsigned int data_count), + TP_ARGS(transaction, card_index, generation, scode, status, timestamp, header, data, data_count), TP_printk( - "transaction=0x%llx generation=%u scode=%u status=%u timestamp=0x%04x dst_id=0x%04x tlabel=%u tcode=%u src_id=0x%04x offset=0x%012llx header=%s data=%s", + "transaction=0x%llx card_index=%u generation=%u scode=%u status=%u timestamp=0x%04x dst_id=0x%04x tlabel=%u tcode=%u src_id=0x%04x offset=0x%012llx header=%s data=%s", __entry->transaction, + __entry->card_index, __entry->generation, __entry->scode, __entry->status, -- cgit v1.2.3 From 3cb44a72a39835b368ab78d739819330089aa2bf Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Thu, 13 Jun 2024 22:14:36 +0900 Subject: firewire: core: record card index in async_phy_outbound_initiate tracepoints event The asynchronous transaction is initiated on one of 1394 OHCI controller, however the existing tracepoints events has the lack of data about it. This commit adds card_index member into event structure to store the index of host controller in use, and prints it. Link: https://lore.kernel.org/r/20240613131440.431766-5-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto --- drivers/firewire/core-cdev.c | 4 ++-- drivers/firewire/core-transaction.c | 2 +- include/trace/events/firewire.h | 9 ++++++--- 3 files changed, 9 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c index 55993c9e0b90..ff8739f96af5 100644 --- a/drivers/firewire/core-cdev.c +++ b/drivers/firewire/core-cdev.c @@ -1659,8 +1659,8 @@ static int ioctl_send_phy_packet(struct client *client, union ioctl_arg *arg) memcpy(pp->data, a->data, sizeof(a->data)); } - trace_async_phy_outbound_initiate((uintptr_t)&e->p, e->p.generation, e->p.header[1], - e->p.header[2]); + trace_async_phy_outbound_initiate((uintptr_t)&e->p, card->index, e->p.generation, + e->p.header[1], e->p.header[2]); card->driver->send_request(card, &e->p); diff --git a/drivers/firewire/core-transaction.c b/drivers/firewire/core-transaction.c index 3503c238f8ae..e522dc3d9897 100644 --- a/drivers/firewire/core-transaction.c +++ b/drivers/firewire/core-transaction.c @@ -504,7 +504,7 @@ void fw_send_phy_config(struct fw_card *card, phy_config_packet.generation = generation; reinit_completion(&phy_config_done); - trace_async_phy_outbound_initiate((uintptr_t)&phy_config_packet, + trace_async_phy_outbound_initiate((uintptr_t)&phy_config_packet, card->index, phy_config_packet.generation, phy_config_packet.header[1], phy_config_packet.header[2]); diff --git a/include/trace/events/firewire.h b/include/trace/events/firewire.h index b72f613cfa02..a59dc26b2a53 100644 --- a/include/trace/events/firewire.h +++ b/include/trace/events/firewire.h @@ -217,23 +217,26 @@ DEFINE_EVENT(async_outbound_complete_template, async_response_outbound_complete, #undef ASYNC_HEADER_GET_RCODE TRACE_EVENT(async_phy_outbound_initiate, - TP_PROTO(u64 packet, unsigned int generation, u32 first_quadlet, u32 second_quadlet), - TP_ARGS(packet, generation, first_quadlet, second_quadlet), + TP_PROTO(u64 packet, unsigned int card_index, unsigned int generation, u32 first_quadlet, u32 second_quadlet), + TP_ARGS(packet, card_index, generation, first_quadlet, second_quadlet), TP_STRUCT__entry( __field(u64, packet) + __field(u8, card_index) __field(u8, generation) __field(u32, first_quadlet) __field(u32, second_quadlet) ), TP_fast_assign( __entry->packet = packet; + __entry->card_index = card_index; __entry->generation = generation; __entry->first_quadlet = first_quadlet; __entry->second_quadlet = second_quadlet ), TP_printk( - "packet=0x%llx generation=%u first_quadlet=0x%08x second_quadlet=0x%08x", + "packet=0x%llx card_index=%u generation=%u first_quadlet=0x%08x second_quadlet=0x%08x", __entry->packet, + __entry->card_index, __entry->generation, __entry->first_quadlet, __entry->second_quadlet -- cgit v1.2.3 From 810f2aa83563020d834425018303f2aaecef1e6e Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Thu, 13 Jun 2024 22:14:37 +0900 Subject: firewire: core: record card index in async_phy_outbound_complete tracepoints event The asynchronous transmission of phy packet is initiated on one of 1394 OHCI controller, however the existing tracepoints events has the lack of data about it. This commit adds card_index member into event structure to store the index of host controller in use, and prints it. Link: https://lore.kernel.org/r/20240613131440.431766-6-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto --- drivers/firewire/core-cdev.c | 2 +- drivers/firewire/core-transaction.c | 2 +- include/trace/events/firewire.h | 9 ++++++--- 3 files changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c index ff8739f96af5..9a7dc90330a3 100644 --- a/drivers/firewire/core-cdev.c +++ b/drivers/firewire/core-cdev.c @@ -1559,7 +1559,7 @@ static void outbound_phy_packet_callback(struct fw_packet *packet, struct client *e_client = e->client; u32 rcode; - trace_async_phy_outbound_complete((uintptr_t)packet, status, packet->generation, + trace_async_phy_outbound_complete((uintptr_t)packet, card->index, status, packet->generation, packet->timestamp); switch (status) { diff --git a/drivers/firewire/core-transaction.c b/drivers/firewire/core-transaction.c index e522dc3d9897..bd5a467cfd60 100644 --- a/drivers/firewire/core-transaction.c +++ b/drivers/firewire/core-transaction.c @@ -464,7 +464,7 @@ static DECLARE_COMPLETION(phy_config_done); static void transmit_phy_packet_callback(struct fw_packet *packet, struct fw_card *card, int status) { - trace_async_phy_outbound_complete((uintptr_t)packet, packet->generation, status, + trace_async_phy_outbound_complete((uintptr_t)packet, card->index, packet->generation, status, packet->timestamp); complete(&phy_config_done); } diff --git a/include/trace/events/firewire.h b/include/trace/events/firewire.h index a59dc26b2a53..61c7a2461fbc 100644 --- a/include/trace/events/firewire.h +++ b/include/trace/events/firewire.h @@ -244,23 +244,26 @@ TRACE_EVENT(async_phy_outbound_initiate, ); TRACE_EVENT(async_phy_outbound_complete, - TP_PROTO(u64 packet, unsigned int generation, unsigned int status, unsigned int timestamp), - TP_ARGS(packet, generation, status, timestamp), + TP_PROTO(u64 packet, unsigned int card_index, unsigned int generation, unsigned int status, unsigned int timestamp), + TP_ARGS(packet, card_index, generation, status, timestamp), TP_STRUCT__entry( __field(u64, packet) + __field(u8, card_index) __field(u8, generation) __field(u8, status) __field(u16, timestamp) ), TP_fast_assign( __entry->packet = packet; + __entry->card_index = card_index; __entry->generation = generation; __entry->status = status; __entry->timestamp = timestamp; ), TP_printk( - "packet=0x%llx generation=%u status=%u timestamp=0x%04x", + "packet=0x%llx card_index=%u generation=%u status=%u timestamp=0x%04x", __entry->packet, + __entry->card_index, __entry->generation, __entry->status, __entry->timestamp -- cgit v1.2.3 From abbb4bd96d7f871b10bd7058f7284ffaf4e8257f Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Thu, 13 Jun 2024 22:14:38 +0900 Subject: firewire: core: record card index in async_phy_inbound tracepoints event The asynchronous transmission of phy packet is initiated on one of 1394 OHCI controller, however the existing tracepoints events has the lack of data about it. This commit adds card_index member into event structure to store the index of host controller in use, and prints it. Link: https://lore.kernel.org/r/20240613131440.431766-7-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto --- drivers/firewire/core-transaction.c | 2 +- include/trace/events/firewire.h | 8 +++++--- 2 files changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/firewire/core-transaction.c b/drivers/firewire/core-transaction.c index bd5a467cfd60..76ab6a209768 100644 --- a/drivers/firewire/core-transaction.c +++ b/drivers/firewire/core-transaction.c @@ -997,7 +997,7 @@ void fw_core_handle_request(struct fw_card *card, struct fw_packet *p) tcode = async_header_get_tcode(p->header); if (tcode_is_link_internal(tcode)) { - trace_async_phy_inbound((uintptr_t)p, p->generation, p->ack, p->timestamp, + trace_async_phy_inbound((uintptr_t)p, card->index, p->generation, p->ack, p->timestamp, p->header[1], p->header[2]); fw_cdev_handle_phy_packet(card, p); return; diff --git a/include/trace/events/firewire.h b/include/trace/events/firewire.h index 61c7a2461fbc..e5524fc71880 100644 --- a/include/trace/events/firewire.h +++ b/include/trace/events/firewire.h @@ -271,10 +271,11 @@ TRACE_EVENT(async_phy_outbound_complete, ); TRACE_EVENT(async_phy_inbound, - TP_PROTO(u64 packet, unsigned int generation, unsigned int status, unsigned int timestamp, u32 first_quadlet, u32 second_quadlet), - TP_ARGS(packet, generation, status, timestamp, first_quadlet, second_quadlet), + TP_PROTO(u64 packet, unsigned int card_index, unsigned int generation, unsigned int status, unsigned int timestamp, u32 first_quadlet, u32 second_quadlet), + TP_ARGS(packet, card_index, generation, status, timestamp, first_quadlet, second_quadlet), TP_STRUCT__entry( __field(u64, packet) + __field(u8, card_index) __field(u8, generation) __field(u8, status) __field(u16, timestamp) @@ -290,8 +291,9 @@ TRACE_EVENT(async_phy_inbound, __entry->second_quadlet = second_quadlet ), TP_printk( - "packet=0x%llx generation=%u status=%u timestamp=0x%04x first_quadlet=0x%08x second_quadlet=0x%08x", + "packet=0x%llx card_index=%u generation=%u status=%u timestamp=0x%04x first_quadlet=0x%08x second_quadlet=0x%08x", __entry->packet, + __entry->card_index, __entry->generation, __entry->status, __entry->timestamp, -- cgit v1.2.3 From 7507dbc46b780e9fa2ec3d4db7cd9ce07e722927 Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Thu, 13 Jun 2024 22:14:39 +0900 Subject: firewire: core: record card index in tracepoinrts events derived from bus_reset_arrange_template The asynchronous transmission of phy packet is initiated on one of 1394 OHCI controller, however the existing tracepoints events has the lack of data about it. This commit adds card_index member into event structure to store the index of host controller in use, and prints it. Link: https://lore.kernel.org/r/20240613131440.431766-8-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto --- drivers/firewire/core-card.c | 6 +++--- include/trace/events/firewire.h | 21 ++++++++++++--------- 2 files changed, 15 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c index 127d87e3a153..f8b99dd6cd82 100644 --- a/drivers/firewire/core-card.c +++ b/drivers/firewire/core-card.c @@ -222,14 +222,14 @@ static int reset_bus(struct fw_card *card, bool short_reset) int reg = short_reset ? 5 : 1; int bit = short_reset ? PHY_BUS_SHORT_RESET : PHY_BUS_RESET; - trace_bus_reset_initiate(card->generation, short_reset); + trace_bus_reset_initiate(card->index, card->generation, short_reset); return card->driver->update_phy_reg(card, reg, 0, bit); } void fw_schedule_bus_reset(struct fw_card *card, bool delayed, bool short_reset) { - trace_bus_reset_schedule(card->generation, short_reset); + trace_bus_reset_schedule(card->index, card->generation, short_reset); /* We don't try hard to sort out requests of long vs. short resets. */ card->br_short = short_reset; @@ -249,7 +249,7 @@ static void br_work(struct work_struct *work) /* Delay for 2s after last reset per IEEE 1394 clause 8.2.1. */ if (card->reset_jiffies != 0 && time_before64(get_jiffies_64(), card->reset_jiffies + 2 * HZ)) { - trace_bus_reset_postpone(card->generation, card->br_short); + trace_bus_reset_postpone(card->index, card->generation, card->br_short); if (!queue_delayed_work(fw_workqueue, &card->br_work, 2 * HZ)) fw_card_put(card); diff --git a/include/trace/events/firewire.h b/include/trace/events/firewire.h index e5524fc71880..e6485051f546 100644 --- a/include/trace/events/firewire.h +++ b/include/trace/events/firewire.h @@ -303,36 +303,39 @@ TRACE_EVENT(async_phy_inbound, ); DECLARE_EVENT_CLASS(bus_reset_arrange_template, - TP_PROTO(unsigned int generation, bool short_reset), - TP_ARGS(generation, short_reset), + TP_PROTO(unsigned int card_index, unsigned int generation, bool short_reset), + TP_ARGS(card_index, generation, short_reset), TP_STRUCT__entry( + __field(u8, card_index) __field(u8, generation) __field(bool, short_reset) ), TP_fast_assign( + __entry->card_index = card_index; __entry->generation = generation; __entry->short_reset = short_reset; ), TP_printk( - "generation=%u short_reset=%s", + "card_index=%u generation=%u short_reset=%s", + __entry->card_index, __entry->generation, __entry->short_reset ? "true" : "false" ) ); DEFINE_EVENT(bus_reset_arrange_template, bus_reset_initiate, - TP_PROTO(unsigned int generation, bool short_reset), - TP_ARGS(generation, short_reset) + TP_PROTO(unsigned int card_index, unsigned int generation, bool short_reset), + TP_ARGS(card_index, generation, short_reset) ); DEFINE_EVENT(bus_reset_arrange_template, bus_reset_schedule, - TP_PROTO(unsigned int generation, bool short_reset), - TP_ARGS(generation, short_reset) + TP_PROTO(unsigned int card_index, unsigned int generation, bool short_reset), + TP_ARGS(card_index, generation, short_reset) ); DEFINE_EVENT(bus_reset_arrange_template, bus_reset_postpone, - TP_PROTO(unsigned int generation, bool short_reset), - TP_ARGS(generation, short_reset) + TP_PROTO(unsigned int card_index, unsigned int generation, bool short_reset), + TP_ARGS(card_index, generation, short_reset) ); TRACE_EVENT(bus_reset_handle, -- cgit v1.2.3 From 893098b2af3ea12bab2f505aa825662b379df67d Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Thu, 13 Jun 2024 22:14:40 +0900 Subject: firewire: core: record card index in bus_reset_handle tracepoints event The bus reset event occurs in the bus managed by one of 1394 OHCI controller in Linux system, however the existing tracepoints events has the lack of data about it to distinguish the issued hardware from the others. This commit adds card_index member into event structure to store the index of host controller in use, and prints it. Link: https://lore.kernel.org/r/20240613131440.431766-9-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto --- drivers/firewire/core-topology.c | 2 +- include/trace/events/firewire.h | 9 ++++++--- 2 files changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/firewire/core-topology.c b/drivers/firewire/core-topology.c index 837cc44d8d9f..8107eebd4296 100644 --- a/drivers/firewire/core-topology.c +++ b/drivers/firewire/core-topology.c @@ -508,7 +508,7 @@ void fw_core_handle_bus_reset(struct fw_card *card, int node_id, int generation, struct fw_node *local_node; unsigned long flags; - trace_bus_reset_handle(generation, node_id, bm_abdicate, self_ids, self_id_count); + trace_bus_reset_handle(card->index, generation, node_id, bm_abdicate, self_ids, self_id_count); spin_lock_irqsave(&card->lock, flags); diff --git a/include/trace/events/firewire.h b/include/trace/events/firewire.h index e6485051f546..5ccc0d91b220 100644 --- a/include/trace/events/firewire.h +++ b/include/trace/events/firewire.h @@ -339,22 +339,25 @@ DEFINE_EVENT(bus_reset_arrange_template, bus_reset_postpone, ); TRACE_EVENT(bus_reset_handle, - TP_PROTO(unsigned int generation, unsigned int node_id, bool bm_abdicate, u32 *self_ids, unsigned int self_id_count), - TP_ARGS(generation, node_id, bm_abdicate, self_ids, self_id_count), + TP_PROTO(unsigned int card_index, unsigned int generation, unsigned int node_id, bool bm_abdicate, u32 *self_ids, unsigned int self_id_count), + TP_ARGS(card_index, generation, node_id, bm_abdicate, self_ids, self_id_count), TP_STRUCT__entry( + __field(u8, card_index) __field(u8, generation) __field(u8, node_id) __field(bool, bm_abdicate) __dynamic_array(u32, self_ids, self_id_count) ), TP_fast_assign( + __entry->card_index = card_index; __entry->generation = generation; __entry->node_id = node_id; __entry->bm_abdicate = bm_abdicate; memcpy(__get_dynamic_array(self_ids), self_ids, __get_dynamic_array_len(self_ids)); ), TP_printk( - "generation=%u node_id=0x%04x bm_abdicate=%s self_ids=%s", + "card_index=%u generation=%u node_id=0x%04x bm_abdicate=%s self_ids=%s", + __entry->card_index, __entry->generation, __entry->node_id, __entry->bm_abdicate ? "true" : "false", -- cgit v1.2.3 From ba437905b4fbf0ee1686c175069239a1cc292558 Mon Sep 17 00:00:00 2001 From: Yazen Ghannam Date: Fri, 7 Jun 2024 16:33:00 -0500 Subject: RAS/AMD/ATL: Use system settings for MI300 DRAM to normalized address translation The currently used normalized address format is not applicable to all MI300 systems. This leads to incorrect results during address translation. Drop the fixed layout and construct the normalized address from system settings. Fixes: 87a612375307 ("RAS/AMD/ATL: Add MI300 DRAM to normalized address translation support") Signed-off-by: Yazen Ghannam Signed-off-by: Borislav Petkov (AMD) Cc: Link: https://lore.kernel.org/r/20240607-mi300-dram-xl-fix-v1-2-2f11547a178c@amd.com --- drivers/ras/amd/atl/internal.h | 2 +- drivers/ras/amd/atl/system.c | 2 +- drivers/ras/amd/atl/umc.c | 151 ++++++++++++++++++++++++++++++----------- 3 files changed, 114 insertions(+), 41 deletions(-) (limited to 'drivers') diff --git a/drivers/ras/amd/atl/internal.h b/drivers/ras/amd/atl/internal.h index 5de69e0bb0f9..196c1c8b578c 100644 --- a/drivers/ras/amd/atl/internal.h +++ b/drivers/ras/amd/atl/internal.h @@ -224,7 +224,7 @@ int df_indirect_read_broadcast(u16 node, u8 func, u16 reg, u32 *lo); int get_df_system_info(void); int determine_node_id(struct addr_ctx *ctx, u8 socket_num, u8 die_num); -int get_addr_hash_mi300(void); +int get_umc_info_mi300(void); int get_address_map(struct addr_ctx *ctx); diff --git a/drivers/ras/amd/atl/system.c b/drivers/ras/amd/atl/system.c index 701349e84942..6979fa3d4fe2 100644 --- a/drivers/ras/amd/atl/system.c +++ b/drivers/ras/amd/atl/system.c @@ -127,7 +127,7 @@ static int df4_determine_df_rev(u32 reg) if (reg == DF_FUNC0_ID_MI300) { df_cfg.flags.heterogeneous = 1; - if (get_addr_hash_mi300()) + if (get_umc_info_mi300()) return -EINVAL; } diff --git a/drivers/ras/amd/atl/umc.c b/drivers/ras/amd/atl/umc.c index 5cb92330dc67..a1b4accf7b96 100644 --- a/drivers/ras/amd/atl/umc.c +++ b/drivers/ras/amd/atl/umc.c @@ -68,6 +68,8 @@ struct xor_bits { }; #define NUM_BANK_BITS 4 +#define NUM_COL_BITS 5 +#define NUM_SID_BITS 2 static struct { /* UMC::CH::AddrHashBank */ @@ -80,7 +82,22 @@ static struct { u8 bank_xor; } addr_hash; +static struct { + u8 bank[NUM_BANK_BITS]; + u8 col[NUM_COL_BITS]; + u8 sid[NUM_SID_BITS]; + u8 num_row_lo; + u8 num_row_hi; + u8 row_lo; + u8 row_hi; + u8 pc; +} bit_shifts; + #define MI300_UMC_CH_BASE 0x90000 +#define MI300_ADDR_CFG (MI300_UMC_CH_BASE + 0x30) +#define MI300_ADDR_SEL (MI300_UMC_CH_BASE + 0x40) +#define MI300_COL_SEL_LO (MI300_UMC_CH_BASE + 0x50) +#define MI300_ADDR_SEL_2 (MI300_UMC_CH_BASE + 0xA4) #define MI300_ADDR_HASH_BANK0 (MI300_UMC_CH_BASE + 0xC8) #define MI300_ADDR_HASH_PC (MI300_UMC_CH_BASE + 0xE0) #define MI300_ADDR_HASH_PC2 (MI300_UMC_CH_BASE + 0xE4) @@ -90,17 +107,42 @@ static struct { #define ADDR_HASH_ROW_XOR GENMASK(31, 14) #define ADDR_HASH_BANK_XOR GENMASK(5, 0) +#define ADDR_CFG_NUM_ROW_LO GENMASK(11, 8) +#define ADDR_CFG_NUM_ROW_HI GENMASK(15, 12) + +#define ADDR_SEL_BANK0 GENMASK(3, 0) +#define ADDR_SEL_BANK1 GENMASK(7, 4) +#define ADDR_SEL_BANK2 GENMASK(11, 8) +#define ADDR_SEL_BANK3 GENMASK(15, 12) +#define ADDR_SEL_BANK4 GENMASK(20, 16) +#define ADDR_SEL_ROW_LO GENMASK(27, 24) +#define ADDR_SEL_ROW_HI GENMASK(31, 28) + +#define COL_SEL_LO_COL0 GENMASK(3, 0) +#define COL_SEL_LO_COL1 GENMASK(7, 4) +#define COL_SEL_LO_COL2 GENMASK(11, 8) +#define COL_SEL_LO_COL3 GENMASK(15, 12) +#define COL_SEL_LO_COL4 GENMASK(19, 16) + +#define ADDR_SEL_2_BANK5 GENMASK(4, 0) +#define ADDR_SEL_2_CHAN GENMASK(15, 12) + /* * Read UMC::CH::AddrHash{Bank,PC,PC2} registers to get XOR bits used - * for hashing. Do this during module init, since the values will not - * change during run time. + * for hashing. + * + * Also, read UMC::CH::Addr{Cfg,Sel,Sel2} and UMC::CH:ColSelLo registers to + * get the values needed to reconstruct the normalized address. Apply additional + * offsets to the raw register values, as needed. + * + * Do this during module init, since the values will not change during run time. * * These registers are instantiated for each UMC across each AMD Node. * However, they should be identically programmed due to the fixed hardware * design of MI300 systems. So read the values from Node 0 UMC 0 and keep a * single global structure for simplicity. */ -int get_addr_hash_mi300(void) +int get_umc_info_mi300(void) { u32 temp; int ret; @@ -130,6 +172,44 @@ int get_addr_hash_mi300(void) addr_hash.bank_xor = FIELD_GET(ADDR_HASH_BANK_XOR, temp); + ret = amd_smn_read(0, MI300_ADDR_CFG, &temp); + if (ret) + return ret; + + bit_shifts.num_row_hi = FIELD_GET(ADDR_CFG_NUM_ROW_HI, temp); + bit_shifts.num_row_lo = 10 + FIELD_GET(ADDR_CFG_NUM_ROW_LO, temp); + + ret = amd_smn_read(0, MI300_ADDR_SEL, &temp); + if (ret) + return ret; + + bit_shifts.bank[0] = 5 + FIELD_GET(ADDR_SEL_BANK0, temp); + bit_shifts.bank[1] = 5 + FIELD_GET(ADDR_SEL_BANK1, temp); + bit_shifts.bank[2] = 5 + FIELD_GET(ADDR_SEL_BANK2, temp); + bit_shifts.bank[3] = 5 + FIELD_GET(ADDR_SEL_BANK3, temp); + /* Use BankBit4 for the SID0 position. */ + bit_shifts.sid[0] = 5 + FIELD_GET(ADDR_SEL_BANK4, temp); + bit_shifts.row_lo = 12 + FIELD_GET(ADDR_SEL_ROW_LO, temp); + bit_shifts.row_hi = 24 + FIELD_GET(ADDR_SEL_ROW_HI, temp); + + ret = amd_smn_read(0, MI300_COL_SEL_LO, &temp); + if (ret) + return ret; + + bit_shifts.col[0] = 2 + FIELD_GET(COL_SEL_LO_COL0, temp); + bit_shifts.col[1] = 2 + FIELD_GET(COL_SEL_LO_COL1, temp); + bit_shifts.col[2] = 2 + FIELD_GET(COL_SEL_LO_COL2, temp); + bit_shifts.col[3] = 2 + FIELD_GET(COL_SEL_LO_COL3, temp); + bit_shifts.col[4] = 2 + FIELD_GET(COL_SEL_LO_COL4, temp); + + ret = amd_smn_read(0, MI300_ADDR_SEL_2, &temp); + if (ret) + return ret; + + /* Use BankBit5 for the SID1 position. */ + bit_shifts.sid[1] = 5 + FIELD_GET(ADDR_SEL_2_BANK5, temp); + bit_shifts.pc = 5 + FIELD_GET(ADDR_SEL_2_CHAN, temp); + return 0; } @@ -146,9 +226,6 @@ int get_addr_hash_mi300(void) * The MCA address format is as follows: * MCA_ADDR[27:0] = {S[1:0], P[0], R[14:0], B[3:0], C[4:0], Z[0]} * - * The normalized address format is fixed in hardware and is as follows: - * NA[30:0] = {S[1:0], R[13:0], C4, B[1:0], B[3:2], C[3:2], P, C[1:0], Z[4:0]} - * * Additionally, the PC and Bank bits may be hashed. This must be accounted for before * reconstructing the normalized address. */ @@ -158,18 +235,10 @@ int get_addr_hash_mi300(void) #define MI300_UMC_MCA_PC BIT(25) #define MI300_UMC_MCA_SID GENMASK(27, 26) -#define MI300_NA_COL_1_0 GENMASK(6, 5) -#define MI300_NA_PC BIT(7) -#define MI300_NA_COL_3_2 GENMASK(9, 8) -#define MI300_NA_BANK_3_2 GENMASK(11, 10) -#define MI300_NA_BANK_1_0 GENMASK(13, 12) -#define MI300_NA_COL_4 BIT(14) -#define MI300_NA_ROW GENMASK(28, 15) -#define MI300_NA_SID GENMASK(30, 29) - static unsigned long convert_dram_to_norm_addr_mi300(unsigned long addr) { - u16 i, col, row, bank, pc, sid, temp; + u16 i, col, row, bank, pc, sid; + u32 temp; col = FIELD_GET(MI300_UMC_MCA_COL, addr); bank = FIELD_GET(MI300_UMC_MCA_BANK, addr); @@ -199,34 +268,38 @@ static unsigned long convert_dram_to_norm_addr_mi300(unsigned long addr) /* Reconstruct the normalized address starting with NA[4:0] = 0 */ addr = 0; - /* NA[6:5] = Column[1:0] */ - temp = col & 0x3; - addr |= FIELD_PREP(MI300_NA_COL_1_0, temp); - - /* NA[7] = PC */ - addr |= FIELD_PREP(MI300_NA_PC, pc); - - /* NA[9:8] = Column[3:2] */ - temp = (col >> 2) & 0x3; - addr |= FIELD_PREP(MI300_NA_COL_3_2, temp); + /* Column bits */ + for (i = 0; i < NUM_COL_BITS; i++) { + temp = (col >> i) & 0x1; + addr |= temp << bit_shifts.col[i]; + } - /* NA[11:10] = Bank[3:2] */ - temp = (bank >> 2) & 0x3; - addr |= FIELD_PREP(MI300_NA_BANK_3_2, temp); + /* Bank bits */ + for (i = 0; i < NUM_BANK_BITS; i++) { + temp = (bank >> i) & 0x1; + addr |= temp << bit_shifts.bank[i]; + } - /* NA[13:12] = Bank[1:0] */ - temp = bank & 0x3; - addr |= FIELD_PREP(MI300_NA_BANK_1_0, temp); + /* Row lo bits */ + for (i = 0; i < bit_shifts.num_row_lo; i++) { + temp = (row >> i) & 0x1; + addr |= temp << (i + bit_shifts.row_lo); + } - /* NA[14] = Column[4] */ - temp = (col >> 4) & 0x1; - addr |= FIELD_PREP(MI300_NA_COL_4, temp); + /* Row hi bits */ + for (i = 0; i < bit_shifts.num_row_hi; i++) { + temp = (row >> (i + bit_shifts.num_row_lo)) & 0x1; + addr |= temp << (i + bit_shifts.row_hi); + } - /* NA[28:15] = Row[13:0] */ - addr |= FIELD_PREP(MI300_NA_ROW, row); + /* PC bit */ + addr |= pc << bit_shifts.pc; - /* NA[30:29] = SID[1:0] */ - addr |= FIELD_PREP(MI300_NA_SID, sid); + /* SID bits */ + for (i = 0; i < NUM_SID_BITS; i++) { + temp = (sid >> i) & 0x1; + addr |= temp << bit_shifts.sid[i]; + } pr_debug("Addr=0x%016lx", addr); pr_debug("Bank=%u Row=%u Column=%u PC=%u SID=%u", bank, row, col, pc, sid); -- cgit v1.2.3 From fcf2a9970ef587d8f358560c381ee6115a9108aa Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 7 Jun 2024 12:18:47 +0200 Subject: leds: class: Revert: "If no default trigger is given, make hw_control trigger the default trigger" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 66601a29bb23 ("leds: class: If no default trigger is given, make hw_control trigger the default trigger") causes ledtrig-netdev to get set as default trigger on various network LEDs. This causes users to hit a pre-existing AB-BA deadlock issue in ledtrig-netdev between the LED-trigger locks and the rtnl mutex, resulting in hung tasks in kernels >= 6.9. Solving the deadlock is non trivial, so for now revert the change to set the hw_control trigger as default trigger, so that ledtrig-netdev no longer gets activated automatically for various network LEDs. The netdev trigger is not needed because the network LEDs are usually under hw-control and the netdev trigger tries to leave things that way so setting it as the active trigger for the LED class device is a no-op. Fixes: 66601a29bb23 ("leds: class: If no default trigger is given, make hw_control trigger the default trigger") Reported-by: Genes Lists Closes: https://lore.kernel.org/all/9d189ec329cfe68ed68699f314e191a10d4b5eda.camel@sapience.com/ Reported-by: Johannes Wüller Closes: https://lore.kernel.org/lkml/e441605c-eaf2-4c2d-872b-d8e541f4cf60@gmail.com/ Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede Reviewed-by: Andrew Lunn Acked-by: Lee Jones Signed-off-by: Linus Torvalds --- drivers/leds/led-class.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c index 24fcff682b24..ba1be15cfd8e 100644 --- a/drivers/leds/led-class.c +++ b/drivers/leds/led-class.c @@ -552,12 +552,6 @@ int led_classdev_register_ext(struct device *parent, led_init_core(led_cdev); #ifdef CONFIG_LEDS_TRIGGERS - /* - * If no default trigger was given and hw_control_trigger is set, - * make it the default trigger. - */ - if (!led_cdev->default_trigger && led_cdev->hw_control_trigger) - led_cdev->default_trigger = led_cdev->hw_control_trigger; led_trigger_set_default(led_cdev); #endif -- cgit v1.2.3