From 36c6468724aa98d33fea9a1d7e07ddda6302f5d4 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 28 Mar 2025 09:24:01 +0100 Subject: mtd: nand: Drop explicit test for built-in CONFIG_SPI_QPIC_SNAND If CONFIG_SPI_QPIC_SNAND=m, but CONFIG_MTD_NAND_QCOM=n: ERROR: modpost: "qcom_nandc_unalloc" [drivers/spi/spi-qpic-snand.ko] undefined! ... Fix this by dropping the explicit test for a built-in CONFIG_SPI_QPIC_SNAND completely. Kbuild handles multiple and mixed obj-y/obj-m rules for the same object file fine. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202503280759.XhwLcV7m-lkp@intel.com/ Fixes: 7304d1909080ef0c ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface") Signed-off-by: Geert Uytterhoeven Signed-off-by: Miquel Raynal --- drivers/mtd/nand/Makefile | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index db516a45f0c5..44913ff1bf12 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -3,11 +3,8 @@ nandcore-objs := core.o bbt.o obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o obj-$(CONFIG_MTD_NAND_ECC_MEDIATEK) += ecc-mtk.o -ifeq ($(CONFIG_SPI_QPIC_SNAND),y) obj-$(CONFIG_SPI_QPIC_SNAND) += qpic_common.o -else obj-$(CONFIG_MTD_NAND_QCOM) += qpic_common.o -endif obj-y += onenand/ obj-y += raw/ obj-y += spi/ -- cgit v1.2.3 From d027951dc85cb2e15924c980dc22a6754d100c7c Mon Sep 17 00:00:00 2001 From: Wentao Liang Date: Wed, 2 Apr 2025 11:16:43 +0800 Subject: mtd: inftlcore: Add error check for inftl_read_oob() In INFTL_findwriteunit(), the return value of inftl_read_oob() need to be checked. A proper implementation can be found in INFTL_deleteblock(). The status will be set as SECTOR_IGNORE to break from the while-loop correctly if the inftl_read_oob() fails. Fixes: 8593fbc68b0d ("[MTD] Rework the out of band handling completely") Cc: stable@vger.kernel.org # v2.6+ Signed-off-by: Wentao Liang Signed-off-by: Miquel Raynal --- drivers/mtd/inftlcore.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c index 9739387cff8c..58c6e1743f5c 100644 --- a/drivers/mtd/inftlcore.c +++ b/drivers/mtd/inftlcore.c @@ -482,10 +482,11 @@ static inline u16 INFTL_findwriteunit(struct INFTLrecord *inftl, unsigned block) silly = MAX_LOOPS; while (thisEUN <= inftl->lastEUN) { - inftl_read_oob(mtd, (thisEUN * inftl->EraseSize) + - blockofs, 8, &retlen, (char *)&bci); - - status = bci.Status | bci.Status1; + if (inftl_read_oob(mtd, (thisEUN * inftl->EraseSize) + + blockofs, 8, &retlen, (char *)&bci) < 0) + status = SECTOR_IGNORE; + else + status = bci.Status | bci.Status1; pr_debug("INFTL: status of block %d in EUN %d is %x\n", block , writeEUN, status); -- cgit v1.2.3 From b79fe1829975556854665258cf4d2476784a89db Mon Sep 17 00:00:00 2001 From: Wentao Liang Date: Wed, 2 Apr 2025 15:56:23 +0800 Subject: mtd: rawnand: Add status chack in r852_ready() In r852_ready(), the dev get from r852_get_dev() need to be checked. An unstable device should not be ready. A proper implementation can be found in r852_read_byte(). Add a status check and return 0 when it is unstable. Fixes: 50a487e7719c ("mtd: rawnand: Pass a nand_chip object to chip->dev_ready()") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Wentao Liang Signed-off-by: Miquel Raynal --- drivers/mtd/nand/raw/r852.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/mtd/nand/raw/r852.c b/drivers/mtd/nand/raw/r852.c index b07c2f8b4035..918974d088cf 100644 --- a/drivers/mtd/nand/raw/r852.c +++ b/drivers/mtd/nand/raw/r852.c @@ -387,6 +387,9 @@ static int r852_wait(struct nand_chip *chip) static int r852_ready(struct nand_chip *chip) { struct r852_device *dev = r852_get_dev(nand_to_mtd(chip)); + if (dev->card_unstable) + return 0; + return !(r852_read_reg(dev, R852_CARD_STA) & R852_CARD_STA_BUSY); } -- cgit v1.2.3