From b98acbff9a05b371c5f0ca6e44a3af8ce9274379 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 11 Jan 2017 15:36:20 +0000 Subject: regulator: twl6030: fix range comparison, allowing vsel = 59 The range min_uV > 1350000 && min_uV <= 150000 is never reachable because of a typo in the previous range check and hence vsel = 59 is never reached. Fix the previous range check to enable the vsel = 59 setting. Fixes CoverityScan CID#728454 ("Logially dead code") Signed-off-by: Colin Ian King Signed-off-by: Mark Brown --- drivers/regulator/twl6030-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/regulator/twl6030-regulator.c b/drivers/regulator/twl6030-regulator.c index 4864b9d742c0..716191046a70 100644 --- a/drivers/regulator/twl6030-regulator.c +++ b/drivers/regulator/twl6030-regulator.c @@ -452,7 +452,7 @@ static int twl6030smps_map_voltage(struct regulator_dev *rdev, int min_uV, vsel = 62; else if ((min_uV > 1800000) && (min_uV <= 1900000)) vsel = 61; - else if ((min_uV > 1350000) && (min_uV <= 1800000)) + else if ((min_uV > 1500000) && (min_uV <= 1800000)) vsel = 60; else if ((min_uV > 1350000) && (min_uV <= 1500000)) vsel = 59; -- cgit v1.2.3 From 24d615a694d649aa2e167c3f97f62bdad07e3f84 Mon Sep 17 00:00:00 2001 From: Aleksander Morgado Date: Wed, 18 Jan 2017 21:31:31 +0100 Subject: USB: serial: qcserial: add Dell DW5570 QDL The Dell DW5570 is a re-branded Sierra Wireless MC8805 which will by default boot with vid 0x413c and pid 0x81a3. When triggered QDL download mode, the device switches to pid 0x81a6 and provides the standard TTY used for firmware upgrade. Cc: Signed-off-by: Aleksander Morgado Signed-off-by: Johan Hovold --- drivers/usb/serial/qcserial.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 1bc6089b9008..696458db7e3c 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -124,6 +124,7 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(0x1410, 0xa021)}, /* Novatel Gobi 3000 Composite */ {USB_DEVICE(0x413c, 0x8193)}, /* Dell Gobi 3000 QDL */ {USB_DEVICE(0x413c, 0x8194)}, /* Dell Gobi 3000 Composite */ + {USB_DEVICE(0x413c, 0x81a6)}, /* Dell DW5570 QDL (MC8805) */ {USB_DEVICE(0x1199, 0x68a4)}, /* Sierra Wireless QDL */ {USB_DEVICE(0x1199, 0x68a5)}, /* Sierra Wireless Modem */ {USB_DEVICE(0x1199, 0x68a8)}, /* Sierra Wireless QDL */ -- cgit v1.2.3 From 773c7220e22d193e5667c352fcbf8d47eefc817f Mon Sep 17 00:00:00 2001 From: Eric Farman Date: Fri, 13 Jan 2017 12:48:06 -0500 Subject: scsi: virtio_scsi: Reject commands when virtqueue is broken In the case of a graceful set of detaches, where the virtio-scsi-ccw disk is removed from the guest prior to the controller, the guest behaves quite normally. Specifically, the detach gets us into sd_sync_cache to issue a Synchronize Cache(10) command, which immediately fails (and is retried a couple of times) because the device has been removed. Later, the removal of the controller sees two CRWs presented, but there's no further indication of the removal from the guest viewpoint. [ 17.217458] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 17.219257] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 21.449400] crw_info : CRW reports slct=0, oflw=0, chn=1, rsc=3, anc=0, erc=4, rsid=2 [ 21.449406] crw_info : CRW reports slct=0, oflw=0, chn=0, rsc=3, anc=0, erc=4, rsid=0 However, on s390, the SCSI disks can be removed "by surprise" when an entire controller (host) is removed and all associated disks are removed via the loop in scsi_forget_host. The same call to sd_sync_cache is made, but because the controller has already been removed, the Synchronize Cache(10) command is neither issued (and then failed) nor rejected. That the I/O isn't returned means the guest cannot have other devices added nor removed, and other tasks (such as shutdown or reboot) issued by the guest will not complete either. The virtio ring has already been marked as broken (via virtio_break_device in virtio_ccw_remove), but we still attempt to queue the command only to have it remain there. The calling sequence provides a bit of distinction for us: virtscsi_queuecommand() -> virtscsi_kick_cmd() -> virtscsi_add_cmd() -> virtqueue_add_sgs() -> virtqueue_add() if success return 0 elseif vq->broken or vring_mapping_error() return -EIO else return -ENOSPC A return of ENOSPC is generally a temporary condition, so returning "host busy" from virtscsi_queuecommand makes sense here, to have it redriven in a moment or two. But the EIO return code is more of a permanent error and so it would be wise to return the I/O itself and allow the calling thread to finish gracefully. The result is these four kernel messages in the guest (the fourth one does not occur prior to this patch): [ 22.921562] crw_info : CRW reports slct=0, oflw=0, chn=1, rsc=3, anc=0, erc=4, rsid=2 [ 22.921580] crw_info : CRW reports slct=0, oflw=0, chn=0, rsc=3, anc=0, erc=4, rsid=0 [ 22.921978] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 22.921993] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK I opted to fill in the same response data that is returned from the more graceful device detach, where the disk device is removed prior to the controller device. Signed-off-by: Eric Farman Reviewed-by: Fam Zheng Signed-off-by: Martin K. Petersen --- drivers/scsi/virtio_scsi.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c index ec91bd07f00a..c680d7641311 100644 --- a/drivers/scsi/virtio_scsi.c +++ b/drivers/scsi/virtio_scsi.c @@ -534,7 +534,9 @@ static int virtscsi_queuecommand(struct virtio_scsi *vscsi, { struct Scsi_Host *shost = virtio_scsi_host(vscsi->vdev); struct virtio_scsi_cmd *cmd = scsi_cmd_priv(sc); + unsigned long flags; int req_size; + int ret; BUG_ON(scsi_sg_count(sc) > shost->sg_tablesize); @@ -562,8 +564,15 @@ static int virtscsi_queuecommand(struct virtio_scsi *vscsi, req_size = sizeof(cmd->req.cmd); } - if (virtscsi_kick_cmd(req_vq, cmd, req_size, sizeof(cmd->resp.cmd)) != 0) + ret = virtscsi_kick_cmd(req_vq, cmd, req_size, sizeof(cmd->resp.cmd)); + if (ret == -EIO) { + cmd->resp.cmd.response = VIRTIO_SCSI_S_BAD_TARGET; + spin_lock_irqsave(&req_vq->vq_lock, flags); + virtscsi_complete_cmd(vscsi, cmd); + spin_unlock_irqrestore(&req_vq->vq_lock, flags); + } else if (ret != 0) { return SCSI_MLQUEUE_HOST_BUSY; + } return 0; } -- cgit v1.2.3 From a5badd1e97e6caeca78ad74191f12fc923c403a8 Mon Sep 17 00:00:00 2001 From: Alison Schofield Date: Sat, 14 Jan 2017 19:51:52 -0800 Subject: iio: health: afe4403: retrieve a valid iio_dev in suspend/resume The suspend/resume functions were using dev_to_iio_dev() to get the iio_dev. That only works on IIO dev's. Replace it with spi functions to get the correct iio_dev. Signed-off-by: Alison Schofield Acked-by: Andrew F. Davis Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/health/afe4403.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/health/afe4403.c b/drivers/iio/health/afe4403.c index 9a081465c42f..6bb23a49e81e 100644 --- a/drivers/iio/health/afe4403.c +++ b/drivers/iio/health/afe4403.c @@ -422,7 +422,7 @@ MODULE_DEVICE_TABLE(of, afe4403_of_match); static int __maybe_unused afe4403_suspend(struct device *dev) { - struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct iio_dev *indio_dev = spi_get_drvdata(to_spi_device(dev)); struct afe4403_data *afe = iio_priv(indio_dev); int ret; @@ -443,7 +443,7 @@ static int __maybe_unused afe4403_suspend(struct device *dev) static int __maybe_unused afe4403_resume(struct device *dev) { - struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct iio_dev *indio_dev = spi_get_drvdata(to_spi_device(dev)); struct afe4403_data *afe = iio_priv(indio_dev); int ret; -- cgit v1.2.3 From 802ecfc113df1e15af1d028427cbbe785ae9cc4a Mon Sep 17 00:00:00 2001 From: Alison Schofield Date: Sat, 14 Jan 2017 19:52:50 -0800 Subject: iio: health: afe4404: retrieve a valid iio_dev in suspend/resume The suspend/resume functions were using dev_to_iio_dev() to get the iio_dev. That only works on IIO dev's. Replace it with i2c functions to get the correct iio_dev. Signed-off-by: Alison Schofield Acked-by: Andrew F. Davis Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/health/afe4404.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/health/afe4404.c b/drivers/iio/health/afe4404.c index 45266404f7e3..964f5231a831 100644 --- a/drivers/iio/health/afe4404.c +++ b/drivers/iio/health/afe4404.c @@ -428,7 +428,7 @@ MODULE_DEVICE_TABLE(of, afe4404_of_match); static int __maybe_unused afe4404_suspend(struct device *dev) { - struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); struct afe4404_data *afe = iio_priv(indio_dev); int ret; @@ -449,7 +449,7 @@ static int __maybe_unused afe4404_suspend(struct device *dev) static int __maybe_unused afe4404_resume(struct device *dev) { - struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); struct afe4404_data *afe = iio_priv(indio_dev); int ret; -- cgit v1.2.3 From 828f84ee8f84710ea1818b3565add268bcb824c8 Mon Sep 17 00:00:00 2001 From: Matt Ranostay Date: Mon, 16 Jan 2017 18:04:18 -0800 Subject: iio: health: max30100: fixed parenthesis around FIFO count check FIFO was being read every sample after the "almost full" state was reached. This was due to an incorrect placement of the parenthesis in the while condition check. Note - the fixes tag is not actually correct, but the fix in this patch would also be needed for it to function correctly so we'll go with that one. Backports should pick up both. Signed-off-by: Matt Ranostay Fixes: b74fccad7 ("iio: health: max30100: correct FIFO check condition") Cc: Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron --- drivers/iio/health/max30100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/health/max30100.c b/drivers/iio/health/max30100.c index 90ab8a2d2846..183c14329d6e 100644 --- a/drivers/iio/health/max30100.c +++ b/drivers/iio/health/max30100.c @@ -238,7 +238,7 @@ static irqreturn_t max30100_interrupt_handler(int irq, void *private) mutex_lock(&data->lock); - while (cnt || (cnt = max30100_fifo_count(data) > 0)) { + while (cnt || (cnt = max30100_fifo_count(data)) > 0) { ret = max30100_read_measurement(data); if (ret) break; -- cgit v1.2.3 From d1aaf20ee655888c227d5137b7a63551f8d15416 Mon Sep 17 00:00:00 2001 From: Alison Schofield Date: Mon, 16 Jan 2017 11:27:52 -0800 Subject: iio: adc: palmas_gpadc: retrieve a valid iio_dev in suspend/resume The suspend/resume functions were using dev_to_iio_dev() to get the iio_dev. That only works on IIO dev's. Use dev_get_drvdata() for a platform device to get the correct iio_dev. Signed-off-by: Alison Schofield Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/palmas_gpadc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/palmas_gpadc.c b/drivers/iio/adc/palmas_gpadc.c index 2bbf0c521beb..7d61b566e148 100644 --- a/drivers/iio/adc/palmas_gpadc.c +++ b/drivers/iio/adc/palmas_gpadc.c @@ -775,7 +775,7 @@ static int palmas_adc_wakeup_reset(struct palmas_gpadc *adc) static int palmas_gpadc_suspend(struct device *dev) { - struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct palmas_gpadc *adc = iio_priv(indio_dev); int wakeup = adc->wakeup1_enable || adc->wakeup2_enable; int ret; @@ -798,7 +798,7 @@ static int palmas_gpadc_suspend(struct device *dev) static int palmas_gpadc_resume(struct device *dev) { - struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct palmas_gpadc *adc = iio_priv(indio_dev); int wakeup = adc->wakeup1_enable || adc->wakeup2_enable; int ret; -- cgit v1.2.3 From 5c113b5e0082e90d2e1c7b12e96a7b8cf0623e27 Mon Sep 17 00:00:00 2001 From: John Brooks Date: Wed, 18 Jan 2017 21:50:39 +0000 Subject: iio: dht11: Use usleep_range instead of msleep for start signal The DHT22 (AM2302) datasheet specifies that the LOW start pulse should not exceed 20ms. However, observations with an oscilloscope of an RPi Model 2B (rev 1.1) communicating with a DHT22 sensor showed that the driver was consistently sending start pulses longer than 20ms: Kernel 4.7.10-v7+ (n=132): Minimum pulse length: 20.20ms Maximum: 29.84ms Mean: 24.96ms StDev: 2.82ms Sensor response rate: 100% Read success rate: 76% On kernel 4.8, the start pulse was so long that the sensor would not even respond 97% of the time: Kernel 4.8.16-v7+ (n=100): Minimum pulse length: 30.4ms Maximum: 74.4ms Mean: 39.3ms StDev: 10.2ms Sensor response rate: 3% Read success rate: 3% The driver would return ETIMEDOUT and write log messages like this: [ 51.430987] dht11 dht11@0: Only 1 signal edges detected [ 66.311019] dht11 dht11@0: Only 0 signal edges detected Replacing msleep(18) with usleep_range(18000, 20000) made the pulse length sane again and restored responsiveness: Kernel 4.8.16-v7+ with usleep_range (n=123): Minimum pulse length: 18.16ms Maximum: 20.20ms Mean: 19.85ms StDev: 0.51ms Sensor response rate: 100% Read success rate: 84% Cc: stable@vger.kernel.org Signed-off-by: John Brooks Reviewed-by: Harald Geyer Signed-off-by: Jonathan Cameron --- drivers/iio/humidity/dht11.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/humidity/dht11.c b/drivers/iio/humidity/dht11.c index 9c47bc98f3ac..2a22ad920333 100644 --- a/drivers/iio/humidity/dht11.c +++ b/drivers/iio/humidity/dht11.c @@ -71,7 +71,8 @@ * a) select an implementation using busy loop polling on those systems * b) use the checksum to do some probabilistic decoding */ -#define DHT11_START_TRANSMISSION 18 /* ms */ +#define DHT11_START_TRANSMISSION_MIN 18000 /* us */ +#define DHT11_START_TRANSMISSION_MAX 20000 /* us */ #define DHT11_MIN_TIMERES 34000 /* ns */ #define DHT11_THRESHOLD 49000 /* ns */ #define DHT11_AMBIG_LOW 23000 /* ns */ @@ -228,7 +229,8 @@ static int dht11_read_raw(struct iio_dev *iio_dev, ret = gpio_direction_output(dht11->gpio, 0); if (ret) goto err; - msleep(DHT11_START_TRANSMISSION); + usleep_range(DHT11_START_TRANSMISSION_MIN, + DHT11_START_TRANSMISSION_MAX); ret = gpio_direction_input(dht11->gpio); if (ret) goto err; -- cgit v1.2.3 From d0e287a401d9acf67b75180b26e2d62b7d482652 Mon Sep 17 00:00:00 2001 From: Rask Ingemann Lambertsen Date: Sat, 21 Jan 2017 17:11:43 +0100 Subject: regulator: axp20x: AXP806: Fix dcdcb being set instead of dcdce A typo or copy-paste bug means that the register access intended for regulator dcdce goes to dcdcb instead. This patch corrects it. Fixes: 2ca342d391e3 (regulator: axp20x: Support AXP806 variant) Signed-off-by: Rask Ingemann Lambertsen Acked-by: Chen-Yu Tsai Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/regulator/axp20x-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index e6a512ebeae2..a3ade9e4ef47 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -272,7 +272,7 @@ static const struct regulator_desc axp806_regulators[] = { 64, AXP806_DCDCD_V_CTRL, 0x3f, AXP806_PWR_OUT_CTRL1, BIT(3)), AXP_DESC(AXP806, DCDCE, "dcdce", "vine", 1100, 3400, 100, - AXP806_DCDCB_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL1, BIT(4)), + AXP806_DCDCE_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL1, BIT(4)), AXP_DESC(AXP806, ALDO1, "aldo1", "aldoin", 700, 3300, 100, AXP806_ALDO1_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL1, BIT(5)), AXP_DESC(AXP806, ALDO2, "aldo2", "aldoin", 700, 3400, 100, -- cgit v1.2.3 From 5d03a2fd2292e71936c4235885c35ccc3c94695b Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Tue, 24 Jan 2017 10:31:18 +0100 Subject: USB: serial: option: add device ID for HP lt2523 (Novatel E371) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Yet another laptop vendor rebranded Novatel E371. Cc: stable@vger.kernel.org Signed-off-by: Bjørn Mork Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 7ce31a4c7e7f..42cc72e54c05 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2007,6 +2007,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_6802, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD300, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d, 0xff, 0xff, 0xff) }, /* HP lt2523 (Novatel E371) */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- cgit v1.2.3 From 407788b51db6f6aab499d02420082f436abf3238 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 24 Jan 2017 09:18:57 -0600 Subject: usb: musb: Fix host mode error -71 regression Commit 467d5c980709 ("usb: musb: Implement session bit based runtime PM for musb-core") started implementing musb generic runtime PM support by introducing devctl register session bit based state control. This caused a regression where if a USB mass storage device is connected to a USB hub, we can get: usb 1-1: reset high-speed USB device number 2 using musb-hdrc usb 1-1: device descriptor read/64, error -71 usb 1-1.1: new high-speed USB device number 4 using musb-hdrc This is because before the USB storage device is connected, musb is in OTG_STATE_A_SUSPEND. And we currently only set need_finish_resume in musb_stage0_irq() and the related code calling finish_resume_work in musb_resume() and musb_runtime_resume() never gets called. To fix the issue, we can call schedule_delayed_work() directly in musb_stage0_irq() to have finish_resume_work run. And we should no longer never get interrupts when when suspended. We have changed musb to no longer need pm_runtime_irqsafe(). The need_finish_resume flag was added in commit 9298b4aad37e ("usb: musb: fix device hotplug behind hub") and no longer applies as far as I can tell. So let's just remove the earlier code that no longer is needed. Fixes: 467d5c980709 ("usb: musb: Implement session bit based runtime PM for musb-core") Reported-by: Bin Liu Signed-off-by: Tony Lindgren Signed-off-by: Bin Liu Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 15 ++------------- drivers/usb/musb/musb_core.h | 1 - 2 files changed, 2 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index fca288bbc800..cd40467be3c5 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -594,11 +594,11 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, | MUSB_PORT_STAT_RESUME; musb->rh_timer = jiffies + msecs_to_jiffies(USB_RESUME_TIMEOUT); - musb->need_finish_resume = 1; - musb->xceiv->otg->state = OTG_STATE_A_HOST; musb->is_active = 1; musb_host_resume_root_hub(musb); + schedule_delayed_work(&musb->finish_resume_work, + msecs_to_jiffies(USB_RESUME_TIMEOUT)); break; case OTG_STATE_B_WAIT_ACON: musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; @@ -2710,11 +2710,6 @@ static int musb_resume(struct device *dev) mask = MUSB_DEVCTL_BDEVICE | MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV; if ((devctl & mask) != (musb->context.devctl & mask)) musb->port1_status = 0; - if (musb->need_finish_resume) { - musb->need_finish_resume = 0; - schedule_delayed_work(&musb->finish_resume_work, - msecs_to_jiffies(USB_RESUME_TIMEOUT)); - } /* * The USB HUB code expects the device to be in RPM_ACTIVE once it came @@ -2766,12 +2761,6 @@ static int musb_runtime_resume(struct device *dev) musb_restore_context(musb); - if (musb->need_finish_resume) { - musb->need_finish_resume = 0; - schedule_delayed_work(&musb->finish_resume_work, - msecs_to_jiffies(USB_RESUME_TIMEOUT)); - } - spin_lock_irqsave(&musb->lock, flags); error = musb_run_resume_work(musb); if (error) diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index ade902ea1221..ce5a18c98c6d 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -410,7 +410,6 @@ struct musb { /* is_suspended means USB B_PERIPHERAL suspend */ unsigned is_suspended:1; - unsigned need_finish_resume :1; /* may_wakeup means remote wakeup is enabled */ unsigned may_wakeup:1; -- cgit v1.2.3 From 3ba7b7795b7e8889af1377904c55c7fae9e0c775 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 24 Jan 2017 09:18:58 -0600 Subject: usb: musb: Fix external abort on non-linefetch for musb_irq_work() While testing musb host mode cable plugging on a BeagleBone, I came across this error: Unhandled fault: external abort on non-linefetch (0x1008) at 0xd1dcfc60 ... [] (musb_default_readb [musb_hdrc]) from [] (musb_irq_work+0x1c/0x180 [musb_hdrc]) [] (musb_irq_work [musb_hdrc]) from [] (process_one_work+0x2b4/0x808) [] (process_one_work) from [] (worker_thread+0x3c/0x550) [] (worker_thread) from [] (kthread+0x104/0x148) [] (kthread) from [] (ret_from_fork+0x14/0x24) Signed-off-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index cd40467be3c5..772f15821242 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1925,6 +1925,14 @@ static void musb_pm_runtime_check_session(struct musb *musb) static void musb_irq_work(struct work_struct *data) { struct musb *musb = container_of(data, struct musb, irq_work.work); + int error; + + error = pm_runtime_get_sync(musb->controller); + if (error < 0) { + dev_err(musb->controller, "Could not enable: %i\n", error); + + return; + } musb_pm_runtime_check_session(musb); @@ -1932,6 +1940,9 @@ static void musb_irq_work(struct work_struct *data) musb->xceiv_old_state = musb->xceiv->otg->state; sysfs_notify(&musb->controller->kobj, NULL, "mode"); } + + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); } static void musb_recover_from_babble(struct musb *musb) -- cgit v1.2.3 From d9b2997e4a0a874e452df7cdd7de5a54502bd0aa Mon Sep 17 00:00:00 2001 From: Lukáš Lalinský Date: Fri, 20 Jan 2017 19:46:34 +0100 Subject: USB: Add quirk for WORLDE easykey.25 MIDI keyboard MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add a quirk for WORLDE easykey.25 MIDI keyboard (idVendor=0218, idProduct=0401). The device reports that it has config string descriptor at index 3, but when the system selects the configuration and tries to get the description, it returns a -EPROTO error, the communication restarts and this keeps repeating over and over again. Not requesting the string descriptor makes the device work correctly. Relevant info from Wireshark: [...] CONFIGURATION DESCRIPTOR bLength: 9 bDescriptorType: 0x02 (CONFIGURATION) wTotalLength: 101 bNumInterfaces: 2 bConfigurationValue: 1 iConfiguration: 3 Configuration bmAttributes: 0xc0 SELF-POWERED NO REMOTE-WAKEUP 1... .... = Must be 1: Must be 1 for USB 1.1 and higher .1.. .... = Self-Powered: This device is SELF-POWERED ..0. .... = Remote Wakeup: This device does NOT support remote wakeup bMaxPower: 50 (100mA) [...] 45 0.369104 host 2.38.0 USB 64 GET DESCRIPTOR Request STRING [...] URB setup bmRequestType: 0x80 1... .... = Direction: Device-to-host .00. .... = Type: Standard (0x00) ...0 0000 = Recipient: Device (0x00) bRequest: GET DESCRIPTOR (6) Descriptor Index: 0x03 bDescriptorType: 0x03 Language Id: English (United States) (0x0409) wLength: 255 46 0.369255 2.38.0 host USB 64 GET DESCRIPTOR Response STRING[Malformed Packet] [...] Frame 46: 64 bytes on wire (512 bits), 64 bytes captured (512 bits) on interface 0 USB URB [Source: 2.38.0] [Destination: host] URB id: 0xffff88021f62d480 URB type: URB_COMPLETE ('C') URB transfer type: URB_CONTROL (0x02) Endpoint: 0x80, Direction: IN Device: 38 URB bus id: 2 Device setup request: not relevant ('-') Data: present (0) URB sec: 1484896277 URB usec: 455031 URB status: Protocol error (-EPROTO) (-71) URB length [bytes]: 0 Data length [bytes]: 0 [Request in: 45] [Time from request: 0.000151000 seconds] Unused Setup Header Interval: 0 Start frame: 0 Copy of Transfer Flags: 0x00000200 Number of ISO descriptors: 0 [Malformed Packet: USB] [Expert Info (Error/Malformed): Malformed Packet (Exception occurred)] [Malformed Packet (Exception occurred)] [Severity level: Error] [Group: Malformed] Signed-off-by: Lukáš Lalinský Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index d2e50a27140c..24f9f98968a5 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -37,6 +37,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* CBM - Flash disk */ { USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME }, + /* WORLDE easy key (easykey.25) MIDI controller */ + { USB_DEVICE(0x0218, 0x0401), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + /* HP 5300/5370C scanner */ { USB_DEVICE(0x03f0, 0x0701), .driver_info = USB_QUIRK_STRING_FETCH_255 }, -- cgit v1.2.3 From b17c1bba9cec1727451b906d9a0c209774624873 Mon Sep 17 00:00:00 2001 From: Rui Miguel Silva Date: Mon, 23 Jan 2017 16:32:57 +0000 Subject: staging: greybus: timesync: validate platform state callback When tearingdown timesync, and not in arche platform, the state platform callback is not initialized. That will trigger the following NULL dereferencing. CallTrace: ? gb_timesync_platform_unlock_bus+0x11/0x20 [greybus] gb_timesync_teardown+0x85/0xc0 [greybus] gb_timesync_svc_remove+0xab/0x190 [greybus] gb_svc_del+0x29/0x110 [greybus] gb_hd_del+0x14/0x20 [greybus] ap_disconnect+0x24/0x60 [gb_es2] usb_unbind_interface+0x7a/0x2c0 __device_release_driver+0x96/0x150 device_release_driver+0x1e/0x30 bus_remove_device+0xe7/0x130 device_del+0x116/0x230 usb_disable_device+0x97/0x1f0 usb_disconnect+0x80/0x260 hub_event+0x5ca/0x10e0 process_one_work+0x126/0x3b0 worker_thread+0x55/0x4c0 ? process_one_work+0x3b0/0x3b0 kthread+0xc4/0xe0 ? kthread_park+0xb0/0xb0 ret_from_fork+0x22/0x30 So, fix that by adding checks before use the callback. Fixes: 970dc85bd95d ("greybus: timesync: Add timesync core driver") Cc: # 4.9.x Signed-off-by: Rui Miguel Silva Reviewed-by: Viresh Kumar Reviewed-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/staging/greybus/timesync_platform.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/staging/greybus/timesync_platform.c b/drivers/staging/greybus/timesync_platform.c index 113f3d6c4b3a..27f75b17679b 100644 --- a/drivers/staging/greybus/timesync_platform.c +++ b/drivers/staging/greybus/timesync_platform.c @@ -45,12 +45,18 @@ u32 gb_timesync_platform_get_clock_rate(void) int gb_timesync_platform_lock_bus(struct gb_timesync_svc *pdata) { + if (!arche_platform_change_state_cb) + return 0; + return arche_platform_change_state_cb(ARCHE_PLATFORM_STATE_TIME_SYNC, pdata); } void gb_timesync_platform_unlock_bus(void) { + if (!arche_platform_change_state_cb) + return; + arche_platform_change_state_cb(ARCHE_PLATFORM_STATE_ACTIVE, NULL); } -- cgit v1.2.3 From 83e526f2a2fa4b2e82b6bd3ddbb26b70acfa8947 Mon Sep 17 00:00:00 2001 From: Vincent Pelletier Date: Wed, 18 Jan 2017 00:57:44 +0000 Subject: usb: gadget: f_fs: Assorted buffer overflow checks. OS descriptor head, when flagged as provided, is accessed without checking if it fits in provided buffer. Verify length before access. Also, there are other places where buffer length it checked after accessing offsets which are potentially past the end. Check buffer length before as well to fail cleanly. Signed-off-by: Vincent Pelletier Acked-by: Felipe Balbi Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/f_fs.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 5490fc51638e..fd80c1b9c823 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -2269,6 +2269,8 @@ static int __ffs_data_do_os_desc(enum ffs_os_desc_type type, if (len < sizeof(*d) || h->interface >= ffs->interfaces_count) return -EINVAL; length = le32_to_cpu(d->dwSize); + if (len < length) + return -EINVAL; type = le32_to_cpu(d->dwPropertyDataType); if (type < USB_EXT_PROP_UNICODE || type > USB_EXT_PROP_UNICODE_MULTI) { @@ -2277,6 +2279,11 @@ static int __ffs_data_do_os_desc(enum ffs_os_desc_type type, return -EINVAL; } pnl = le16_to_cpu(d->wPropertyNameLength); + if (length < 14 + pnl) { + pr_vdebug("invalid os descriptor length: %d pnl:%d (descriptor %d)\n", + length, pnl, type); + return -EINVAL; + } pdl = le32_to_cpu(*(u32 *)((u8 *)data + 10 + pnl)); if (length != 14 + pnl + pdl) { pr_vdebug("invalid os descriptor length: %d pnl:%d pdl:%d (descriptor %d)\n", @@ -2363,6 +2370,9 @@ static int __ffs_data_got_descs(struct ffs_data *ffs, } } if (flags & (1 << i)) { + if (len < 4) { + goto error; + } os_descs_count = get_unaligned_le32(data); data += 4; len -= 4; @@ -2435,7 +2445,8 @@ static int __ffs_data_got_strings(struct ffs_data *ffs, ENTER(); - if (unlikely(get_unaligned_le32(data) != FUNCTIONFS_STRINGS_MAGIC || + if (unlikely(len < 16 || + get_unaligned_le32(data) != FUNCTIONFS_STRINGS_MAGIC || get_unaligned_le32(data + 4) != len)) goto error; str_count = get_unaligned_le32(data + 8); -- cgit v1.2.3 From 1372cef1c697d8aac0cc923f8aa2c37d790ec9ed Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Wed, 25 Jan 2017 19:30:09 +0000 Subject: regulator: fixed: Revert support for ACPI interface This reverts commit 13bed58ce874 (regulator: fixed: add support for ACPI interface). While there does appear to be a practical need to manage regulators on ACPI systems, using ad-hoc properties to describe regulators to the kernel presents a number of problems (especially should ACPI gain first class support for such things), and there are ongoing discussions as to how to manage this. Until there is a rough consensus, revert commit 13bed58ce8748d43, which hasn't been in a released kernel yet as discussed in [1] and the surrounding thread. [1] http://lkml.kernel.org/r/20170125184949.x2wkoo7kbaaajkjk@sirena.org.uk Signed-off-by: Mark Rutland Cc: Liam Girdwood Cc: Lorenzo Pieralisi Cc: Lu Baolu Cc: Mark Brown Cc: Rafael J. Wysocki Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown --- drivers/regulator/fixed.c | 46 ---------------------------------------------- 1 file changed, 46 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c index a43b0e8a438d..988a7472c2ab 100644 --- a/drivers/regulator/fixed.c +++ b/drivers/regulator/fixed.c @@ -30,9 +30,6 @@ #include #include #include -#include -#include -#include struct fixed_voltage_data { struct regulator_desc desc; @@ -97,44 +94,6 @@ of_get_fixed_voltage_config(struct device *dev, return config; } -/** - * acpi_get_fixed_voltage_config - extract fixed_voltage_config structure info - * @dev: device requesting for fixed_voltage_config - * @desc: regulator description - * - * Populates fixed_voltage_config structure by extracting data through ACPI - * interface, returns a pointer to the populated structure of NULL if memory - * alloc fails. - */ -static struct fixed_voltage_config * -acpi_get_fixed_voltage_config(struct device *dev, - const struct regulator_desc *desc) -{ - struct fixed_voltage_config *config; - const char *supply_name; - struct gpio_desc *gpiod; - int ret; - - config = devm_kzalloc(dev, sizeof(*config), GFP_KERNEL); - if (!config) - return ERR_PTR(-ENOMEM); - - ret = device_property_read_string(dev, "supply-name", &supply_name); - if (!ret) - config->supply_name = supply_name; - - gpiod = gpiod_get(dev, "gpio", GPIOD_ASIS); - if (IS_ERR(gpiod)) - return ERR_PTR(-ENODEV); - - config->gpio = desc_to_gpio(gpiod); - config->enable_high = device_property_read_bool(dev, - "enable-active-high"); - gpiod_put(gpiod); - - return config; -} - static struct regulator_ops fixed_voltage_ops = { }; @@ -155,11 +114,6 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev) &drvdata->desc); if (IS_ERR(config)) return PTR_ERR(config); - } else if (ACPI_HANDLE(&pdev->dev)) { - config = acpi_get_fixed_voltage_config(&pdev->dev, - &drvdata->desc); - if (IS_ERR(config)) - return PTR_ERR(config); } else { config = dev_get_platdata(&pdev->dev); } -- cgit v1.2.3 From 191e885a2e130e639bb0c8ee350d7047294f2ce6 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 25 Jan 2017 10:31:52 -0800 Subject: firmware: fix NULL pointer dereference in __fw_load_abort() Since commit 5d47ec02c37ea6 ("firmware: Correct handling of fw_state_wait() return value") fw_load_abort() could be called twice and lead us to a kernel crash. This happens only when the firmware fallback mechanism (regular or custom) is used. The fallback mechanism exposes a sysfs interface for userspace to upload a file and notify the kernel when the file is loaded and ready, or to cancel an upload by echo'ing -1 into on the loading file: echo -n "-1" > /sys/$DEVPATH/loading This will call fw_load_abort(). Some distributions actually have a udev rule in place to *always* immediately cancel all firmware fallback mechanism requests (Debian), they have: $ cat /lib/udev/rules.d/50-firmware.rules # stub for immediately telling the kernel that userspace firmware loading # failed; necessary to avoid long timeouts with CONFIG_FW_LOADER_USER_HELPER=y SUBSYSTEM=="firmware", ACTION=="add", ATTR{loading}="-1 Distributions with this udev rule would run into this crash only if the fallback mechanism is used. Since most distributions disable by default using the fallback mechanism (CONFIG_FW_LOADER_USER_HELPER_FALLBACK), this would typicaly mean only 2 drivers which *require* the fallback mechanism could typically incur a crash: drivers/firmware/dell_rbu.c and the drivers/leds/leds-lp55xx-common.c driver. Distributions enabling CONFIG_FW_LOADER_USER_HELPER_FALLBACK by default are obviously more exposed to this crash. The crash happens because after commit 5b029624948d ("firmware: do not use fw_lock for fw_state protection") and subsequent fix commit 5d47ec02c37ea6 ("firmware: Correct handling of fw_state_wait() return value") a race can happen between this cancelation and the firmware fw_state_wait_timeout() being woken up after a state change with which fw_load_abort() as that calls swake_up(). Upon error fw_state_wait_timeout() will also again call fw_load_abort() and trigger a null reference. At first glance we could just fix this with a !buf check on fw_load_abort() before accessing buf->fw_st, however there is a logical issue in having a state machine used for the fallback mechanism and preventing access from it once we abort as its inside the buf (buf->fw_st). The firmware_class.c code is setting the buf to NULL to annotate an abort has occurred. Replace this mechanism by simply using the state check instead. All the other code in place already uses similar checks for aborting as well so no further changes are needed. An oops can be reproduced with the new fw_fallback.sh fallback mechanism cancellation test. Either cancelling the fallback mechanism or the custom fallback mechanism triggers a crash. mcgrof@piggy ~/linux-next/tools/testing/selftests/firmware (git::20170111-fw-fixes)$ sudo ./fw_fallback.sh ./fw_fallback.sh: timeout works ./fw_fallback.sh: firmware comparison works ./fw_fallback.sh: fallback mechanism works [ this then sits here when it is trying the cancellation test ] Kernel log: test_firmware: loading 'nope-test-firmware.bin' misc test_firmware: Direct firmware load for nope-test-firmware.bin failed with error -2 misc test_firmware: Falling back to user helper BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 IP: _request_firmware+0xa27/0xad0 PGD 0 Oops: 0000 [#1] SMP Modules linked in: test_firmware(E) ... etc ... CPU: 1 PID: 1396 Comm: fw_fallback.sh Tainted: G W E 4.10.0-rc3-next-20170111+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.1-0-g8891697-prebuilt.qemu-project.org 04/01/2014 task: ffff9740b27f4340 task.stack: ffffbb15c0bc8000 RIP: 0010:_request_firmware+0xa27/0xad0 RSP: 0018:ffffbb15c0bcbd10 EFLAGS: 00010246 RAX: 00000000fffffffe RBX: ffff9740afe5aa80 RCX: 0000000000000000 RDX: ffff9740b27f4340 RSI: 0000000000000283 RDI: 0000000000000000 RBP: ffffbb15c0bcbd90 R08: ffffbb15c0bcbcd8 R09: 0000000000000000 R10: 0000000894a0d4b1 R11: 000000000000008c R12: ffffffffc0312480 R13: 0000000000000005 R14: ffff9740b1c32400 R15: 00000000000003e8 FS: 00007f8604422700(0000) GS:ffff9740bfc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000038 CR3: 000000012164c000 CR4: 00000000000006e0 Call Trace: request_firmware+0x37/0x50 trigger_request_store+0x79/0xd0 [test_firmware] dev_attr_store+0x18/0x30 sysfs_kf_write+0x37/0x40 kernfs_fop_write+0x110/0x1a0 __vfs_write+0x37/0x160 ? _cond_resched+0x1a/0x50 vfs_write+0xb5/0x1a0 SyS_write+0x55/0xc0 ? trace_do_page_fault+0x37/0xd0 entry_SYSCALL_64_fastpath+0x1e/0xad RIP: 0033:0x7f8603f49620 RSP: 002b:00007fff6287b788 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000055c307b110a0 RCX: 00007f8603f49620 RDX: 0000000000000016 RSI: 000055c3084d8a90 RDI: 0000000000000001 RBP: 0000000000000016 R08: 000000000000c0ff R09: 000055c3084d6336 R10: 000055c307b108b0 R11: 0000000000000246 R12: 000055c307b13c80 R13: 000055c3084d6320 R14: 0000000000000000 R15: 00007fff6287b950 Code: 9f 64 84 e8 9c 61 fe ff b8 f4 ff ff ff e9 6b f9 ff ff 48 c7 c7 40 6b 8d 84 89 45 a8 e8 43 84 18 00 49 8b be 00 03 00 00 8b 45 a8 <83> 7f 38 02 74 08 e8 6e ec ff ff 8b 45 a8 49 c7 86 00 03 00 00 RIP: _request_firmware+0xa27/0xad0 RSP: ffffbb15c0bcbd10 CR2: 0000000000000038 ---[ end trace 6d94ac339c133e6f ]--- Fixes: 5d47ec02c37e ("firmware: Correct handling of fw_state_wait() return value") Reported-and-Tested-by: Jakub Kicinski Reported-and-Tested-by: Patrick Bruenn Reported-by: Chris Wilson CC: [3.10+] Signed-off-by: Luis R. Rodriguez Signed-off-by: Greg Kroah-Hartman --- drivers/base/firmware_class.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c index 4497d263209f..ac350c518e0c 100644 --- a/drivers/base/firmware_class.c +++ b/drivers/base/firmware_class.c @@ -558,9 +558,6 @@ static void fw_load_abort(struct firmware_priv *fw_priv) struct firmware_buf *buf = fw_priv->buf; __fw_load_abort(buf); - - /* avoid user action after loading abort */ - fw_priv->buf = NULL; } static LIST_HEAD(pending_fw_head); @@ -713,7 +710,7 @@ static ssize_t firmware_loading_store(struct device *dev, mutex_lock(&fw_lock); fw_buf = fw_priv->buf; - if (!fw_buf) + if (fw_state_is_aborted(&fw_buf->fw_st)) goto out; switch (loading) { -- cgit v1.2.3 From 9b02c54bc951fca884ba5719f42a27e8240965bf Mon Sep 17 00:00:00 2001 From: Markus Mayer Date: Mon, 19 Dec 2016 12:10:27 -0800 Subject: cpufreq: brcmstb-avs-cpufreq: extend sysfs entry brcm_avs_pmap We extend the brcm_avs_pmap sysfs entry (which issues the GET_PMAP command to AVS) to include all fields from struct pmap. This means adding mode (AVS, DVS, DVFS) and state (the P-state) to the output. Signed-off-by: Markus Mayer Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/brcmstb-avs-cpufreq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/brcmstb-avs-cpufreq.c b/drivers/cpufreq/brcmstb-avs-cpufreq.c index 4fda623e55bb..2c6e3253ba64 100644 --- a/drivers/cpufreq/brcmstb-avs-cpufreq.c +++ b/drivers/cpufreq/brcmstb-avs-cpufreq.c @@ -954,9 +954,9 @@ static ssize_t show_brcm_avs_pmap(struct cpufreq_policy *policy, char *buf) brcm_avs_parse_p1(pmap.p1, &mdiv_p0, &pdiv, &ndiv); brcm_avs_parse_p2(pmap.p2, &mdiv_p1, &mdiv_p2, &mdiv_p3, &mdiv_p4); - return sprintf(buf, "0x%08x 0x%08x %u %u %u %u %u %u %u\n", + return sprintf(buf, "0x%08x 0x%08x %u %u %u %u %u %u %u %u %u\n", pmap.p1, pmap.p2, ndiv, pdiv, mdiv_p0, mdiv_p1, mdiv_p2, - mdiv_p3, mdiv_p4); + mdiv_p3, mdiv_p4, pmap.mode, pmap.state); } static ssize_t show_brcm_avs_voltage(struct cpufreq_policy *policy, char *buf) -- cgit v1.2.3 From 3c223c19aea85d3dda1416c187915f4a30b04b1f Mon Sep 17 00:00:00 2001 From: Markus Mayer Date: Mon, 19 Dec 2016 12:10:28 -0800 Subject: cpufreq: brcmstb-avs-cpufreq: properly retrieve P-state upon suspend The AVS GET_PMAP command does return a P-state along with the P-map information. However, that P-state is the initial P-state when the P-map was first downloaded to AVS. It is *not* the current P-state. Therefore, we explicitly retrieve the P-state using the GET_PSTATE command. Signed-off-by: Markus Mayer Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/brcmstb-avs-cpufreq.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cpufreq/brcmstb-avs-cpufreq.c b/drivers/cpufreq/brcmstb-avs-cpufreq.c index 2c6e3253ba64..c94360671f41 100644 --- a/drivers/cpufreq/brcmstb-avs-cpufreq.c +++ b/drivers/cpufreq/brcmstb-avs-cpufreq.c @@ -784,8 +784,19 @@ static int brcm_avs_target_index(struct cpufreq_policy *policy, static int brcm_avs_suspend(struct cpufreq_policy *policy) { struct private_data *priv = policy->driver_data; + int ret; + + ret = brcm_avs_get_pmap(priv, &priv->pmap); + if (ret) + return ret; - return brcm_avs_get_pmap(priv, &priv->pmap); + /* + * We can't use the P-state returned by brcm_avs_get_pmap(), since + * that's the initial P-state from when the P-map was downloaded to the + * AVS co-processor, not necessarily the P-state we are running at now. + * So, we get the current P-state explicitly. + */ + return brcm_avs_get_pstate(priv, &priv->pmap.state); } static int brcm_avs_resume(struct cpufreq_policy *policy) -- cgit v1.2.3 From 030305d69fc6963c16003f50d7e8d74b02d0a143 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jan 2017 15:00:45 -0600 Subject: PCI/ASPM: Handle PCI-to-PCIe bridges as roots of PCIe hierarchies In a struct pcie_link_state, link->root points to the pcie_link_state of the root of the PCIe hierarchy. For the topmost link, this points to itself (link->root = link). For others, we copy the pointer from the parent (link->root = link->parent->root). Previously we recognized that Root Ports originated PCIe hierarchies, but we treated PCI/PCI-X to PCIe Bridges as being in the middle of the hierarchy, and when we tried to copy the pointer from link->parent->root, there was no parent, and we dereferenced a NULL pointer: BUG: unable to handle kernel NULL pointer dereference at 0000000000000090 IP: [] pcie_aspm_init_link_state+0x170/0x820 Recognize that PCI/PCI-X to PCIe Bridges originate PCIe hierarchies just like Root Ports do, so link->root for these devices should also point to itself. Fixes: 51ebfc92b72b ("PCI: Enumerate switches below PCI-to-PCIe bridges") Link: https://bugzilla.kernel.org/show_bug.cgi?id=193411 Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1022181 Tested-by: lists@ssl-mail.com Tested-by: Jayachandran C. Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org # v4.2+ --- drivers/pci/pcie/aspm.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 17ac1dce3286..3dd8bcbb3011 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -532,25 +532,32 @@ static struct pcie_link_state *alloc_pcie_link_state(struct pci_dev *pdev) link = kzalloc(sizeof(*link), GFP_KERNEL); if (!link) return NULL; + INIT_LIST_HEAD(&link->sibling); INIT_LIST_HEAD(&link->children); INIT_LIST_HEAD(&link->link); link->pdev = pdev; - if (pci_pcie_type(pdev) != PCI_EXP_TYPE_ROOT_PORT) { + + /* + * Root Ports and PCI/PCI-X to PCIe Bridges are roots of PCIe + * hierarchies. + */ + if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT || + pci_pcie_type(pdev) == PCI_EXP_TYPE_PCIE_BRIDGE) { + link->root = link; + } else { struct pcie_link_state *parent; + parent = pdev->bus->parent->self->link_state; if (!parent) { kfree(link); return NULL; } + link->parent = parent; + link->root = link->parent->root; list_add(&link->link, &parent->children); } - /* Setup a pointer to the root port link */ - if (!link->parent) - link->root = link; - else - link->root = link->parent->root; list_add(&link->sibling, &link_list); pdev->link_state = link; -- cgit v1.2.3 From 4e5b54f127426c82dc2816340c26d951a5bb3429 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 18 Dec 2016 14:35:45 +0100 Subject: drm: prevent double-(un)registration for connectors If we're unlucky then the registration from a hotplugged connector might race with the final registration step on driver load. And since MST topology discover is asynchronous that's even somewhat likely. v2: Also update the kerneldoc for @registered! v3: Review from Chris: - Improve kerneldoc for late_register/early_unregister callbacks. - Use mutex_destroy. Reviewed-by: Chris Wilson Cc: Chris Wilson Reviewed-by: Sean Paul Reported-by: Chris Wilson Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20161218133545.2106-1-daniel.vetter@ffwll.ch (cherry picked from commit e73ab00e9a0f1731f34d0620a9c55f5c30c4ad4e) --- drivers/gpu/drm/drm_connector.c | 20 +++++++++++++++----- include/drm/drm_connector.h | 16 +++++++++++++++- 2 files changed, 30 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c index 5a4526289392..8be60a4576b3 100644 --- a/drivers/gpu/drm/drm_connector.c +++ b/drivers/gpu/drm/drm_connector.c @@ -225,6 +225,7 @@ int drm_connector_init(struct drm_device *dev, INIT_LIST_HEAD(&connector->probed_modes); INIT_LIST_HEAD(&connector->modes); + mutex_init(&connector->mutex); connector->edid_blob_ptr = NULL; connector->status = connector_status_unknown; @@ -359,6 +360,8 @@ void drm_connector_cleanup(struct drm_connector *connector) connector->funcs->atomic_destroy_state(connector, connector->state); + mutex_destroy(&connector->mutex); + memset(connector, 0, sizeof(*connector)); } EXPORT_SYMBOL(drm_connector_cleanup); @@ -374,14 +377,15 @@ EXPORT_SYMBOL(drm_connector_cleanup); */ int drm_connector_register(struct drm_connector *connector) { - int ret; + int ret = 0; + mutex_lock(&connector->mutex); if (connector->registered) - return 0; + goto unlock; ret = drm_sysfs_connector_add(connector); if (ret) - return ret; + goto unlock; ret = drm_debugfs_connector_add(connector); if (ret) { @@ -397,12 +401,14 @@ int drm_connector_register(struct drm_connector *connector) drm_mode_object_register(connector->dev, &connector->base); connector->registered = true; - return 0; + goto unlock; err_debugfs: drm_debugfs_connector_remove(connector); err_sysfs: drm_sysfs_connector_remove(connector); +unlock: + mutex_unlock(&connector->mutex); return ret; } EXPORT_SYMBOL(drm_connector_register); @@ -415,8 +421,11 @@ EXPORT_SYMBOL(drm_connector_register); */ void drm_connector_unregister(struct drm_connector *connector) { - if (!connector->registered) + mutex_lock(&connector->mutex); + if (!connector->registered) { + mutex_unlock(&connector->mutex); return; + } if (connector->funcs->early_unregister) connector->funcs->early_unregister(connector); @@ -425,6 +434,7 @@ void drm_connector_unregister(struct drm_connector *connector) drm_debugfs_connector_remove(connector); connector->registered = false; + mutex_unlock(&connector->mutex); } EXPORT_SYMBOL(drm_connector_unregister); diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h index a9b95246e26e..045a97cbeba2 100644 --- a/include/drm/drm_connector.h +++ b/include/drm/drm_connector.h @@ -381,6 +381,8 @@ struct drm_connector_funcs { * core drm connector interfaces. Everything added from this callback * should be unregistered in the early_unregister callback. * + * This is called while holding drm_connector->mutex. + * * Returns: * * 0 on success, or a negative error code on failure. @@ -395,6 +397,8 @@ struct drm_connector_funcs { * late_register(). It is called from drm_connector_unregister(), * early in the driver unload sequence to disable userspace access * before data structures are torndown. + * + * This is called while holding drm_connector->mutex. */ void (*early_unregister)(struct drm_connector *connector); @@ -559,7 +563,6 @@ struct drm_cmdline_mode { * @interlace_allowed: can this connector handle interlaced modes? * @doublescan_allowed: can this connector handle doublescan? * @stereo_allowed: can this connector handle stereo modes? - * @registered: is this connector exposed (registered) with userspace? * @modes: modes available on this connector (from fill_modes() + user) * @status: one of the drm_connector_status enums (connected, not, or unknown) * @probed_modes: list of modes derived directly from the display @@ -607,6 +610,13 @@ struct drm_connector { char *name; + /** + * @mutex: Lock for general connector state, but currently only protects + * @registered. Most of the connector state is still protected by the + * mutex in &drm_mode_config. + */ + struct mutex mutex; + /** * @index: Compacted connector index, which matches the position inside * the mode_config.list for drivers not supporting hot-add/removing. Can @@ -620,6 +630,10 @@ struct drm_connector { bool interlace_allowed; bool doublescan_allowed; bool stereo_allowed; + /** + * @registered: Is this connector exposed (registered) with userspace? + * Protected by @mutex. + */ bool registered; struct list_head modes; /* list of modes on this connector */ -- cgit v1.2.3 From e6e7b48b295afa5a5ab440de0a94d9ad8b3ce2d0 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 12 Jan 2017 17:15:56 +0100 Subject: drm: Don't race connector registration I was under the misconception that the sysfs dev stuff can be fully set up, and then registered all in one step with device_add. That's true for properties and property groups, but not for parents and child devices. Those must be fully registered before you can register a child. Add a bit of tracking to make sure that asynchronous mst connector hotplugging gets this right. For consistency we rely upon the implicit barriers of the connector->mutex, which is taken anyway, to ensure that at least either the connector or device registration call will work out. Mildly tested since I can't reliably reproduce this on my mst box here. Reported-by: Dave Hansen Cc: Dave Hansen Acked-by: Chris Wilson Cc: Chris Wilson Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1484237756-2720-1-git-send-email-daniel.vetter@ffwll.ch --- drivers/gpu/drm/drm_connector.c | 3 +++ drivers/gpu/drm/drm_drv.c | 4 ++++ include/drm/drmP.h | 1 + 3 files changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c index 8be60a4576b3..7a7019ac9388 100644 --- a/drivers/gpu/drm/drm_connector.c +++ b/drivers/gpu/drm/drm_connector.c @@ -379,6 +379,9 @@ int drm_connector_register(struct drm_connector *connector) { int ret = 0; + if (!connector->dev->registered) + return 0; + mutex_lock(&connector->mutex); if (connector->registered) goto unlock; diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index a525751b4559..6594b4088f11 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -745,6 +745,8 @@ int drm_dev_register(struct drm_device *dev, unsigned long flags) if (ret) goto err_minors; + dev->registered = true; + if (dev->driver->load) { ret = dev->driver->load(dev, flags); if (ret) @@ -785,6 +787,8 @@ void drm_dev_unregister(struct drm_device *dev) drm_lastclose(dev); + dev->registered = false; + if (drm_core_check_feature(dev, DRIVER_MODESET)) drm_modeset_unregister_all(dev); diff --git a/include/drm/drmP.h b/include/drm/drmP.h index 192016e2b518..9c4ee144b5f6 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -517,6 +517,7 @@ struct drm_device { struct drm_minor *control; /**< Control node */ struct drm_minor *primary; /**< Primary node */ struct drm_minor *render; /**< Render node */ + bool registered; /* currently active master for this device. Protected by master_mutex */ struct drm_master *master; -- cgit v1.2.3 From f9f96fc10c09ca16e336854c08bc1563eed97985 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 10 Jan 2017 09:44:54 -0200 Subject: [media] cec: fix wrong last_la determination Due to an incorrect condition the last_la used for the initial attempt at claiming a logical address could be wrong. The last_la wasn't converted to a mask when ANDing with type2mask, so that test was broken. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/cec/cec-adap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/cec/cec-adap.c b/drivers/media/cec/cec-adap.c index ebb5e391b800..87a6b65ed3af 100644 --- a/drivers/media/cec/cec-adap.c +++ b/drivers/media/cec/cec-adap.c @@ -1206,7 +1206,7 @@ static int cec_config_thread_func(void *arg) las->log_addr[i] = CEC_LOG_ADDR_INVALID; if (last_la == CEC_LOG_ADDR_INVALID || last_la == CEC_LOG_ADDR_UNREGISTERED || - !(last_la & type2mask[type])) + !((1 << last_la) & type2mask[type])) last_la = la_list[0]; err = cec_config_log_addr(adap, i, last_la); -- cgit v1.2.3 From 52f5631a4c056ad01682393be56d2be237e81610 Mon Sep 17 00:00:00 2001 From: Jurij Smakov Date: Mon, 30 Jan 2017 15:41:36 -0600 Subject: rtlwifi: rtl8192ce: Fix loading of incorrect firmware In commit cf4747d7535a ("rtlwifi: Fix regression caused by commit d86e64768859, an error in the edit results in the wrong firmware being loaded for some models of the RTL8188/8192CE. In this condition, the connection suffered from high ping latency, slow transfer rates, and required higher signal strengths to work at all See https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=853073, https://bugzilla.opensuse.org/show_bug.cgi?id=1017471, and https://github.com/lwfinger/rtlwifi_new/issues/203 for descriptions of the problems. This patch fixes all of those problems. Fixes: cf4747d7535a ("rtlwifi: Fix regression caused by commit d86e64768859") Signed-off-by: Jurij Smakov Signed-off-by: Larry Finger Cc: Stable # 4.9+ Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtlwifi/rtl8192ce/sw.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/sw.c index 691ddef1ae28..a33a06d58a9a 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/sw.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/sw.c @@ -92,7 +92,7 @@ int rtl92c_init_sw_vars(struct ieee80211_hw *hw) struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); - char *fw_name = "rtlwifi/rtl8192cfwU.bin"; + char *fw_name; rtl8192ce_bt_reg_init(hw); @@ -164,8 +164,13 @@ int rtl92c_init_sw_vars(struct ieee80211_hw *hw) } /* request fw */ - if (IS_81XXC_VENDOR_UMC_B_CUT(rtlhal->version)) + if (IS_VENDOR_UMC_A_CUT(rtlhal->version) && + !IS_92C_SERIAL(rtlhal->version)) + fw_name = "rtlwifi/rtl8192cfwU.bin"; + else if (IS_81XXC_VENDOR_UMC_B_CUT(rtlhal->version)) fw_name = "rtlwifi/rtl8192cfwU_B.bin"; + else + fw_name = "rtlwifi/rtl8192cfw.bin"; rtlpriv->max_fw_size = 0x4000; pr_info("Using firmware %s\n", fw_name); -- cgit v1.2.3 From 433e19cf33d34bb6751c874a9c00980552fe508c Mon Sep 17 00:00:00 2001 From: Dexuan Cui Date: Sat, 28 Jan 2017 11:46:02 -0700 Subject: Drivers: hv: vmbus: finally fix hv_need_to_signal_on_read() Commit a389fcfd2cb5 ("Drivers: hv: vmbus: Fix signaling logic in hv_need_to_signal_on_read()") added the proper mb(), but removed the test "prev_write_sz < pending_sz" when making the signal decision. As a result, the guest can signal the host unnecessarily, and then the host can throttle the guest because the host thinks the guest is buggy or malicious; finally the user running stress test can perceive intermittent freeze of the guest. This patch brings back the test, and properly handles the in-place consumption APIs used by NetVSC (see get_next_pkt_raw(), put_pkt_raw() and commit_rd_index()). Fixes: a389fcfd2cb5 ("Drivers: hv: vmbus: Fix signaling logic in hv_need_to_signal_on_read()") Signed-off-by: Dexuan Cui Reported-by: Rolf Neugebauer Tested-by: Rolf Neugebauer Cc: "K. Y. Srinivasan" Cc: Haiyang Zhang Cc: Stephen Hemminger Cc: Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/ring_buffer.c | 1 + drivers/net/hyperv/netvsc.c | 6 ++++++ include/linux/hyperv.h | 32 ++++++++++++++++++++++++++++++-- 3 files changed, 37 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hv/ring_buffer.c b/drivers/hv/ring_buffer.c index cd49cb17eb7f..308dbda700eb 100644 --- a/drivers/hv/ring_buffer.c +++ b/drivers/hv/ring_buffer.c @@ -383,6 +383,7 @@ int hv_ringbuffer_read(struct vmbus_channel *channel, return ret; } + init_cached_read_index(channel); next_read_location = hv_get_next_read_location(inring_info); next_read_location = hv_copyfrom_ringbuffer(inring_info, &desc, sizeof(desc), diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c index 5a1cc089acb7..86e5749226ef 100644 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -1295,6 +1295,9 @@ void netvsc_channel_cb(void *context) ndev = hv_get_drvdata(device); buffer = get_per_channel_state(channel); + /* commit_rd_index() -> hv_signal_on_read() needs this. */ + init_cached_read_index(channel); + do { desc = get_next_pkt_raw(channel); if (desc != NULL) { @@ -1347,6 +1350,9 @@ void netvsc_channel_cb(void *context) bufferlen = bytes_recvd; } + + init_cached_read_index(channel); + } while (1); if (bufferlen > NETVSC_PACKET_SIZE) diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 42fe43fb0c80..183efde54269 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -128,6 +128,7 @@ struct hv_ring_buffer_info { u32 ring_data_startoffset; u32 priv_write_index; u32 priv_read_index; + u32 cached_read_index; }; /* @@ -180,6 +181,19 @@ static inline u32 hv_get_bytes_to_write(struct hv_ring_buffer_info *rbi) return write; } +static inline u32 hv_get_cached_bytes_to_write( + const struct hv_ring_buffer_info *rbi) +{ + u32 read_loc, write_loc, dsize, write; + + dsize = rbi->ring_datasize; + read_loc = rbi->cached_read_index; + write_loc = rbi->ring_buffer->write_index; + + write = write_loc >= read_loc ? dsize - (write_loc - read_loc) : + read_loc - write_loc; + return write; +} /* * VMBUS version is 32 bit entity broken up into * two 16 bit quantities: major_number. minor_number. @@ -1488,7 +1502,7 @@ hv_get_ring_buffer(struct hv_ring_buffer_info *ring_info) static inline void hv_signal_on_read(struct vmbus_channel *channel) { - u32 cur_write_sz; + u32 cur_write_sz, cached_write_sz; u32 pending_sz; struct hv_ring_buffer_info *rbi = &channel->inbound; @@ -1512,12 +1526,24 @@ static inline void hv_signal_on_read(struct vmbus_channel *channel) cur_write_sz = hv_get_bytes_to_write(rbi); - if (cur_write_sz >= pending_sz) + if (cur_write_sz < pending_sz) + return; + + cached_write_sz = hv_get_cached_bytes_to_write(rbi); + if (cached_write_sz < pending_sz) vmbus_setevent(channel); return; } +static inline void +init_cached_read_index(struct vmbus_channel *channel) +{ + struct hv_ring_buffer_info *rbi = &channel->inbound; + + rbi->cached_read_index = rbi->ring_buffer->read_index; +} + /* * An API to support in-place processing of incoming VMBUS packets. */ @@ -1569,6 +1595,8 @@ static inline void put_pkt_raw(struct vmbus_channel *channel, * This call commits the read index and potentially signals the host. * Here is the pattern for using the "in-place" consumption APIs: * + * init_cached_read_index(); + * * while (get_next_pkt_raw() { * process the packet "in-place"; * put_pkt_raw(); -- cgit v1.2.3 From 96692b097ba76d0c637ae8af47b29c73da33c9d0 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 14 Dec 2016 09:52:39 +1000 Subject: drm/nouveau/fence/g84-: protect against concurrent access to semaphore buffers Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_fence.h | 1 + drivers/gpu/drm/nouveau/nv84_fence.c | 6 ++++++ 2 files changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_fence.h b/drivers/gpu/drm/nouveau/nouveau_fence.h index ccdce1b4eec4..d5e58a38f160 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fence.h +++ b/drivers/gpu/drm/nouveau/nouveau_fence.h @@ -99,6 +99,7 @@ struct nv84_fence_priv { struct nouveau_bo *bo; struct nouveau_bo *bo_gart; u32 *suspend; + struct mutex mutex; }; int nv84_fence_context_new(struct nouveau_channel *); diff --git a/drivers/gpu/drm/nouveau/nv84_fence.c b/drivers/gpu/drm/nouveau/nv84_fence.c index 52b87ae83e7b..f0b322bec7df 100644 --- a/drivers/gpu/drm/nouveau/nv84_fence.c +++ b/drivers/gpu/drm/nouveau/nv84_fence.c @@ -107,8 +107,10 @@ nv84_fence_context_del(struct nouveau_channel *chan) struct nv84_fence_chan *fctx = chan->fence; nouveau_bo_wr32(priv->bo, chan->chid * 16 / 4, fctx->base.sequence); + mutex_lock(&priv->mutex); nouveau_bo_vma_del(priv->bo, &fctx->vma_gart); nouveau_bo_vma_del(priv->bo, &fctx->vma); + mutex_unlock(&priv->mutex); nouveau_fence_context_del(&fctx->base); chan->fence = NULL; nouveau_fence_context_free(&fctx->base); @@ -134,11 +136,13 @@ nv84_fence_context_new(struct nouveau_channel *chan) fctx->base.sync32 = nv84_fence_sync32; fctx->base.sequence = nv84_fence_read(chan); + mutex_lock(&priv->mutex); ret = nouveau_bo_vma_add(priv->bo, cli->vm, &fctx->vma); if (ret == 0) { ret = nouveau_bo_vma_add(priv->bo_gart, cli->vm, &fctx->vma_gart); } + mutex_unlock(&priv->mutex); if (ret) nv84_fence_context_del(chan); @@ -212,6 +216,8 @@ nv84_fence_create(struct nouveau_drm *drm) priv->base.context_base = dma_fence_context_alloc(priv->base.contexts); priv->base.uevent = true; + mutex_init(&priv->mutex); + /* Use VRAM if there is any ; otherwise fallback to system memory */ domain = drm->device.info.ram_size != 0 ? TTM_PL_FLAG_VRAM : /* -- cgit v1.2.3 From c966b6279f610a24ac1d42dcbe30e10fa61220b2 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 25 May 2016 17:11:40 +1000 Subject: drm/nouveau: prevent userspace from deleting client object Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_usif.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_usif.c b/drivers/gpu/drm/nouveau/nouveau_usif.c index 08f9c6fa0f7f..1fba38622744 100644 --- a/drivers/gpu/drm/nouveau/nouveau_usif.c +++ b/drivers/gpu/drm/nouveau/nouveau_usif.c @@ -313,7 +313,8 @@ usif_ioctl(struct drm_file *filp, void __user *user, u32 argc) if (!(ret = nvif_unpack(-ENOSYS, &data, &size, argv->v0, 0, 0, true))) { /* block access to objects not created via this interface */ owner = argv->v0.owner; - if (argv->v0.object == 0ULL) + if (argv->v0.object == 0ULL && + argv->v0.type != NVIF_IOCTL_V0_DEL) argv->v0.owner = NVDRM_OBJECT_ANY; /* except client */ else argv->v0.owner = NVDRM_OBJECT_USIF; -- cgit v1.2.3 From 7dfee6827780d4228148263545af936d0cae8930 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 9 Jan 2017 10:22:15 +1000 Subject: drm/nouveau/disp/mcp7x: disable dptmds workaround The workaround appears to cause regressions on these boards, and from inspection of RM traces, NVIDIA don't appear to do it on them either. Signed-off-by: Ben Skeggs Tested-by: Roy Spliet --- drivers/gpu/drm/nouveau/nvkm/engine/disp/nv50.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/nv50.c b/drivers/gpu/drm/nouveau/nvkm/engine/disp/nv50.c index 567466f93cd5..0db8efbf1c2e 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/nv50.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/nv50.c @@ -433,8 +433,6 @@ nv50_disp_dptmds_war(struct nvkm_device *device) case 0x94: case 0x96: case 0x98: - case 0xaa: - case 0xac: return true; default: break; -- cgit v1.2.3 From d72498ca2cbcf15e5038b184a95f061bca21e820 Mon Sep 17 00:00:00 2001 From: Martin Peres Date: Wed, 7 Dec 2016 06:30:15 +0200 Subject: drm/nouveau/nouveau/led: prevent compiling the led-code if nouveau=y and leds=m The proper fix would have been to select LEDS_CLASS but this can lead to a circular dependency, as found out by Arnd. This patch implements Arnd's suggestion instead, at the cost of some auto-magic for a fringe feature. Reported-by: Arnd Bergmann Reported-by: Intel's 0-DAY Fixes: 8d021d71b324 ("drm/nouveau/drm/nouveau: add a LED driver for the NVIDIA logo") Signed-off-by: Martin Peres Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_led.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_led.h b/drivers/gpu/drm/nouveau/nouveau_led.h index 187ecdb82002..21a5775028cc 100644 --- a/drivers/gpu/drm/nouveau/nouveau_led.h +++ b/drivers/gpu/drm/nouveau/nouveau_led.h @@ -42,7 +42,7 @@ nouveau_led(struct drm_device *dev) } /* nouveau_led.c */ -#if IS_ENABLED(CONFIG_LEDS_CLASS) +#if IS_REACHABLE(CONFIG_LEDS_CLASS) int nouveau_led_init(struct drm_device *dev); void nouveau_led_suspend(struct drm_device *dev); void nouveau_led_resume(struct drm_device *dev); -- cgit v1.2.3 From d347583a39e2df609a9e40c835f72d3614665b53 Mon Sep 17 00:00:00 2001 From: Alastair Bridgewater Date: Wed, 11 Jan 2017 15:47:18 -0500 Subject: drm/nouveau/disp/gt215: Fix HDA ELD handling (thus, HDMI audio) on gt215 Store the ELD correctly, not just enough copies of the first byte to pad out the given ELD size. Signed-off-by: Alastair Bridgewater Fixes: 120b0c39c756 ("drm/nv50-/disp: audit and version SOR_HDA_ELD method") Cc: stable@vger.kernel.org # v3.17+ Reviewed-by: Ilia Mirkin Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvkm/engine/disp/hdagt215.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/hdagt215.c b/drivers/gpu/drm/nouveau/nvkm/engine/disp/hdagt215.c index 6f0436df0219..f8f2f16c22a2 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/hdagt215.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/hdagt215.c @@ -59,7 +59,7 @@ gt215_hda_eld(NV50_DISP_MTHD_V1) ); } for (i = 0; i < size; i++) - nvkm_wr32(device, 0x61c440 + soff, (i << 8) | args->v0.data[0]); + nvkm_wr32(device, 0x61c440 + soff, (i << 8) | args->v0.data[i]); for (; i < 0x60; i++) nvkm_wr32(device, 0x61c440 + soff, (i << 8)); nvkm_mask(device, 0x61c448 + soff, 0x80000003, 0x80000003); -- cgit v1.2.3 From 24bf7ae359b8cca165bb30742d2b1c03a1eb23af Mon Sep 17 00:00:00 2001 From: Ilia Mirkin Date: Thu, 19 Jan 2017 22:56:30 -0500 Subject: drm/nouveau/nv1a,nv1f/disp: fix memory clock rate retrieval Based on the xf86-video-nv code, NFORCE (NV1A) and NFORCE2 (NV1F) have a different way of retrieving clocks. See the nv_hw.c:nForceUpdateArbitrationSettings function in the original code for how these clocks were accessed. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54587 Cc: stable@vger.kernel.org Signed-off-by: Ilia Mirkin Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/dispnv04/hw.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/dispnv04/hw.c b/drivers/gpu/drm/nouveau/dispnv04/hw.c index 74856a8b8f35..e64f52464ecf 100644 --- a/drivers/gpu/drm/nouveau/dispnv04/hw.c +++ b/drivers/gpu/drm/nouveau/dispnv04/hw.c @@ -222,6 +222,7 @@ nouveau_hw_get_clock(struct drm_device *dev, enum nvbios_pll_type plltype) uint32_t mpllP; pci_read_config_dword(pci_get_bus_and_slot(0, 3), 0x6c, &mpllP); + mpllP = (mpllP >> 8) & 0xf; if (!mpllP) mpllP = 4; @@ -232,7 +233,7 @@ nouveau_hw_get_clock(struct drm_device *dev, enum nvbios_pll_type plltype) uint32_t clock; pci_read_config_dword(pci_get_bus_and_slot(0, 5), 0x4c, &clock); - return clock; + return clock / 1000; } ret = nouveau_hw_get_pllvals(dev, plltype, &pllvals); -- cgit v1.2.3 From 2b5078937355c0d662ecef54b7d4d04f48da4fa9 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 24 Jan 2017 09:32:26 +1000 Subject: drm/nouveau/kms/nv50: request vblank events for commits that send completion events This somehow fixes an issue where sync-to-vblank longer works correctly after resume from suspend. From a HW perspective, we don't need the IRQs turned on to be able to detect flip completion, so it's assumed that this is required for the voodoo in the core DRM vblank core. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_display.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c index 2c2c64507661..32097fd615fd 100644 --- a/drivers/gpu/drm/nouveau/nv50_display.c +++ b/drivers/gpu/drm/nouveau/nv50_display.c @@ -4052,6 +4052,11 @@ nv50_disp_atomic_commit_tail(struct drm_atomic_state *state) } } + for_each_crtc_in_state(state, crtc, crtc_state, i) { + if (crtc->state->event) + drm_crtc_vblank_get(crtc); + } + /* Update plane(s). */ for_each_plane_in_state(state, plane, plane_state, i) { struct nv50_wndw_atom *asyw = nv50_wndw_atom(plane->state); @@ -4101,6 +4106,7 @@ nv50_disp_atomic_commit_tail(struct drm_atomic_state *state) drm_crtc_send_vblank_event(crtc, crtc->state->event); spin_unlock_irqrestore(&crtc->dev->event_lock, flags); crtc->state->event = NULL; + drm_crtc_vblank_put(crtc); } } -- cgit v1.2.3 From 161e6d44a5e2d3f85365cb717d60e363171b39e6 Mon Sep 17 00:00:00 2001 From: Gabriel Krisman Bertazi Date: Mon, 16 Jan 2017 12:23:42 -0200 Subject: mmc: sdhci: Ignore unexpected CARD_INT interrupts One of our kernelCI boxes hanged at boot because a faulty eSDHC device was triggering spurious CARD_INT interrupts for SD cards, causing CMD52 reads, which are not allowed for SD devices. This adds a sanity check to the interruption path, preventing that illegal command from getting sent if the CARD_INT interruption should be disabled. This quirk allows that particular machine to resume boot despite the faulty hardware, instead of getting hung dealing with thousands of mishandled interrupts. Suggested-by: Adrian Hunter Signed-off-by: Gabriel Krisman Bertazi Acked-by: Adrian Hunter Signed-off-by: Ulf Hansson Cc: --- drivers/mmc/host/sdhci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 23909804ffb8..0def99590d16 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2733,7 +2733,8 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id) if (intmask & SDHCI_INT_RETUNE) mmc_retune_needed(host->mmc); - if (intmask & SDHCI_INT_CARD_INT) { + if ((intmask & SDHCI_INT_CARD_INT) && + (host->ier & SDHCI_INT_CARD_INT)) { sdhci_enable_sdio_irq_nolock(host, false); host->thread_isr |= SDHCI_INT_CARD_INT; result = IRQ_WAKE_THREAD; -- cgit v1.2.3 From 92c715fca907686f5298220ece53423e38ba3aed Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Tue, 31 Jan 2017 10:25:25 +0100 Subject: drm/atomic: Fix double free in drm_atomic_state_default_clear drm_atomic_helper_page_flip and drm_atomic_ioctl set their own events in crtc_state->event. But when it's set the event is freed in 2 places. Solve this by only freeing the event in the atomic ioctl when it allocated its own event. This has been broken twice. The first time when the code was introduced, but only in the corner case when an event is allocated, but more crtc's were included by atomic check and then failing. This can mostly happen when you do an atomic modeset in i915 and the display clock is changed, which forces all crtc's to be included to the state. This has been broken worse by adding in-fences support, which caused the double free to be done unconditionally. [IGT] kms_rotation_crc: starting subtest primary-rotation-180 ============================================================================= BUG kmalloc-128 (Tainted: G U ): Object already free ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in drm_atomic_helper_setup_commit+0x285/0x2f0 [drm_kms_helper] age=0 cpu=3 pid=1529 ___slab_alloc+0x308/0x3b0 __slab_alloc+0xd/0x20 kmem_cache_alloc_trace+0x92/0x1c0 drm_atomic_helper_setup_commit+0x285/0x2f0 [drm_kms_helper] intel_atomic_commit+0x35/0x4f0 [i915] drm_atomic_commit+0x46/0x50 [drm] drm_mode_atomic_ioctl+0x7d4/0xab0 [drm] drm_ioctl+0x2b3/0x490 [drm] do_vfs_ioctl+0x69c/0x700 SyS_ioctl+0x4e/0x80 entry_SYSCALL_64_fastpath+0x13/0x94 INFO: Freed in drm_event_cancel_free+0xa3/0xb0 [drm] age=0 cpu=3 pid=1529 __slab_free+0x48/0x2e0 kfree+0x159/0x1a0 drm_event_cancel_free+0xa3/0xb0 [drm] drm_mode_atomic_ioctl+0x86d/0xab0 [drm] drm_ioctl+0x2b3/0x490 [drm] do_vfs_ioctl+0x69c/0x700 SyS_ioctl+0x4e/0x80 entry_SYSCALL_64_fastpath+0x13/0x94 INFO: Slab 0xffffde1f0997b080 objects=17 used=2 fp=0xffff92fb65ec2578 flags=0x200000000008101 INFO: Object 0xffff92fb65ec2578 @offset=1400 fp=0xffff92fb65ec2ae8 Redzone ffff92fb65ec2570: bb bb bb bb bb bb bb bb ........ Object ffff92fb65ec2578: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec2588: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec2598: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec25a8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec25b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec25c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec25d8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec25e8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk. Redzone ffff92fb65ec25f8: bb bb bb bb bb bb bb bb ........ Padding ffff92fb65ec2738: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ CPU: 3 PID: 180 Comm: kworker/3:2 Tainted: G BU 4.10.0-rc6-patser+ #5039 Hardware name: /NUC5PPYB, BIOS PYBSWCEL.86A.0031.2015.0601.1712 06/01/2015 Workqueue: events intel_atomic_helper_free_state [i915] Call Trace: dump_stack+0x4d/0x6d print_trailer+0x20c/0x220 free_debug_processing+0x1c6/0x330 ? drm_atomic_state_default_clear+0xf7/0x1c0 [drm] __slab_free+0x48/0x2e0 ? drm_atomic_state_default_clear+0xf7/0x1c0 [drm] kfree+0x159/0x1a0 drm_atomic_state_default_clear+0xf7/0x1c0 [drm] ? drm_atomic_state_clear+0x30/0x30 [drm] intel_atomic_state_clear+0xd/0x20 [i915] drm_atomic_state_clear+0x1a/0x30 [drm] __drm_atomic_state_free+0x13/0x60 [drm] intel_atomic_helper_free_state+0x5d/0x70 [i915] process_one_work+0x260/0x4a0 worker_thread+0x2d1/0x4f0 kthread+0x127/0x130 ? process_one_work+0x4a0/0x4a0 ? kthread_stop+0x120/0x120 ret_from_fork+0x29/0x40 FIX kmalloc-128: Object at 0xffff92fb65ec2578 not freed Fixes: 3b24f7d67581 ("drm/atomic: Add struct drm_crtc_commit to track async updates") Fixes: 9626014258a5 ("drm/fence: add in-fences support") Cc: # v4.8+ Cc: Daniel Vetter Signed-off-by: Maarten Lankhorst Reviewed-by: Daniel Vetter Reviewed-by: Gustavo Padovan Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1485854725-27640-1-git-send-email-maarten.lankhorst@linux.intel.com --- drivers/gpu/drm/drm_atomic.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c index 50f5cf7b69d1..fdfb1ec17e66 100644 --- a/drivers/gpu/drm/drm_atomic.c +++ b/drivers/gpu/drm/drm_atomic.c @@ -2032,13 +2032,16 @@ static void complete_crtc_signaling(struct drm_device *dev, } for_each_crtc_in_state(state, crtc, crtc_state, i) { + struct drm_pending_vblank_event *event = crtc_state->event; /* - * TEST_ONLY and PAGE_FLIP_EVENT are mutually - * exclusive, if they weren't, this code should be - * called on success for TEST_ONLY too. + * Free the allocated event. drm_atomic_helper_setup_commit + * can allocate an event too, so only free it if it's ours + * to prevent a double free in drm_atomic_state_clear. */ - if (crtc_state->event) - drm_event_cancel_free(dev, &crtc_state->event->base); + if (event && (event->base.fence || event->base.file_priv)) { + drm_event_cancel_free(dev, &event->base); + crtc_state->event = NULL; + } } if (!fence_state) -- cgit v1.2.3 From d07830db1bdb254e4b50d366010b219286b8c937 Mon Sep 17 00:00:00 2001 From: "Marcel J.E. Mol" Date: Mon, 30 Jan 2017 19:26:40 +0100 Subject: USB: serial: pl2303: add ATEN device ID Seems that ATEN serial-to-usb devices using pl2303 exist with different device ids. This patch adds a missing device ID so it is recognised by the driver. Signed-off-by: Marcel J.E. Mol Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/pl2303.c | 1 + drivers/usb/serial/pl2303.h | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 46fca6b75846..1db4b61bdf7b 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -49,6 +49,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) }, { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) }, + { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID2) }, { USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) }, { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) }, { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID_UCSGT) }, diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index e3b7af8adfb7..09d9be88209e 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -27,6 +27,7 @@ #define ATEN_VENDOR_ID 0x0557 #define ATEN_VENDOR_ID2 0x0547 #define ATEN_PRODUCT_ID 0x2008 +#define ATEN_PRODUCT_ID2 0x2118 #define IODATA_VENDOR_ID 0x04bb #define IODATA_PRODUCT_ID 0x0a03 -- cgit v1.2.3 From 970d14e3989160ee9e97c7d75ecbc893fd29dab9 Mon Sep 17 00:00:00 2001 From: Bhumika Goyal Date: Wed, 25 Jan 2017 00:54:07 +0530 Subject: nvdimm: constify device_type structures Declare device_type structure as const as it is only stored in the type field of a device structure. This field is of type const, so add const to declaration of device_type structure. File size before: text data bss dec hex filename 19278 3199 16 22493 57dd nvdimm/namespace_devs.o File size after: text data bss dec hex filename 19929 3160 16 23105 5a41 nvdimm/namespace_devs.o Signed-off-by: Bhumika Goyal Signed-off-by: Dan Williams --- drivers/nvdimm/namespace_devs.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/nvdimm/namespace_devs.c b/drivers/nvdimm/namespace_devs.c index a518cb1b59d4..eda027db0918 100644 --- a/drivers/nvdimm/namespace_devs.c +++ b/drivers/nvdimm/namespace_devs.c @@ -52,17 +52,17 @@ static void namespace_blk_release(struct device *dev) kfree(nsblk); } -static struct device_type namespace_io_device_type = { +static const struct device_type namespace_io_device_type = { .name = "nd_namespace_io", .release = namespace_io_release, }; -static struct device_type namespace_pmem_device_type = { +static const struct device_type namespace_pmem_device_type = { .name = "nd_namespace_pmem", .release = namespace_pmem_release, }; -static struct device_type namespace_blk_device_type = { +static const struct device_type namespace_blk_device_type = { .name = "nd_namespace_blk", .release = namespace_blk_release, }; -- cgit v1.2.3 From 9d032f4201d39e5cf43a8709a047e481f5723fdc Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 25 Jan 2017 00:54:07 +0530 Subject: libnvdimm, namespace: do not delete namespace-id 0 Given that the naming of pmem devices changes from the pmemX form to the pmemX.Y form when namespace id is greater than 0, arrange for namespaces with id-0 to be exempt from deletion. Otherwise a simple reconfiguration of an existing namespace to a new mode results in a name change of the resulting block device: # ndctl list --namespace=namespace1.0 { "dev":"namespace1.0", "mode":"raw", "size":2147483648, "uuid":"3dadf3dc-89b9-4b24-b20e-abc8a4707ce3", "blockdev":"pmem1" } # ndctl create-namespace --reconfig=namespace1.0 --mode=memory --force { "dev":"namespace1.1", "mode":"memory", "size":2111832064, "uuid":"7b4a6341-7318-4219-a02c-fb57c0bbf613", "blockdev":"pmem1.1" } This change does require tooling changes to explicitly look for namespaceX.0 if the seed has already advanced to another namespace. Cc: Fixes: 98a29c39dc68 ("libnvdimm, namespace: allow creation of multiple pmem-namespaces per region") Reviewed-by: Johannes Thumshirn Signed-off-by: Dan Williams --- drivers/nvdimm/namespace_devs.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/nvdimm/namespace_devs.c b/drivers/nvdimm/namespace_devs.c index eda027db0918..ce3e8dfa10ad 100644 --- a/drivers/nvdimm/namespace_devs.c +++ b/drivers/nvdimm/namespace_devs.c @@ -962,8 +962,8 @@ static ssize_t __size_store(struct device *dev, unsigned long long val) struct nvdimm_drvdata *ndd; struct nd_label_id label_id; u32 flags = 0, remainder; + int rc, i, id = -1; u8 *uuid = NULL; - int rc, i; if (dev->driver || ndns->claim) return -EBUSY; @@ -972,11 +972,13 @@ static ssize_t __size_store(struct device *dev, unsigned long long val) struct nd_namespace_pmem *nspm = to_nd_namespace_pmem(dev); uuid = nspm->uuid; + id = nspm->id; } else if (is_namespace_blk(dev)) { struct nd_namespace_blk *nsblk = to_nd_namespace_blk(dev); uuid = nsblk->uuid; flags = NSLABEL_FLAG_LOCAL; + id = nsblk->id; } /* @@ -1039,10 +1041,11 @@ static ssize_t __size_store(struct device *dev, unsigned long long val) /* * Try to delete the namespace if we deleted all of its - * allocation, this is not the seed device for the region, and - * it is not actively claimed by a btt instance. + * allocation, this is not the seed or 0th device for the + * region, and it is not actively claimed by a btt, pfn, or dax + * instance. */ - if (val == 0 && nd_region->ns_seed != dev && !ndns->claim) + if (val == 0 && id != 0 && nd_region->ns_seed != dev && !ndns->claim) nd_device_unregister(dev, ND_ASYNC); return rc; -- cgit v1.2.3 From eeee74a4f6625b77c3e8db0693c2d4546507ba0d Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Tue, 31 Jan 2017 10:21:30 +0100 Subject: drm/atomic: Unconditionally call prepare_fb. Atomic drivers may set properties like rotation on the same fb, which may require a call to prepare_fb even when framebuffer stays identical. Instead of handling all the special cases in the core, let the driver decide when prepare_fb and cleanup_fb are noops. This is a revert of: commit fcc60b413d14dd06ddbd79ec50e83c4fb2a097ba Author: Keith Packard Date: Sat Jun 4 01:16:22 2016 -0700 drm: Don't prepare or cleanup unchanging frame buffers [v3] The original commit mentions that this prevents waiting in i915 on all previous rendering during cursor updates, but there are better ways to fix this. Signed-off-by: Maarten Lankhorst Acked-by: Laurent Pinchart Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/6d82f9b6-9d16-91d1-d176-4a37b09afc44@linux.intel.com (cherry picked from commit 0532be078a207d7dd6ad26ebd0834e258acc4ee7) Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1485854491-27389-2-git-send-email-maarten.lankhorst@linux.intel.com --- drivers/gpu/drm/drm_atomic_helper.c | 9 --------- 1 file changed, 9 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index 34f757bcabae..4594477dee00 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -1666,9 +1666,6 @@ int drm_atomic_helper_prepare_planes(struct drm_device *dev, funcs = plane->helper_private; - if (!drm_atomic_helper_framebuffer_changed(dev, state, plane_state->crtc)) - continue; - if (funcs->prepare_fb) { ret = funcs->prepare_fb(plane, plane_state); if (ret) @@ -1685,9 +1682,6 @@ fail: if (j >= i) continue; - if (!drm_atomic_helper_framebuffer_changed(dev, state, plane_state->crtc)) - continue; - funcs = plane->helper_private; if (funcs->cleanup_fb) @@ -1954,9 +1948,6 @@ void drm_atomic_helper_cleanup_planes(struct drm_device *dev, for_each_plane_in_state(old_state, plane, plane_state, i) { const struct drm_plane_helper_funcs *funcs; - if (!drm_atomic_helper_framebuffer_changed(dev, old_state, plane_state->crtc)) - continue; - funcs = plane->helper_private; if (funcs->cleanup_fb) -- cgit v1.2.3 From e8fe4f4b2b7b93048729538321c681c0cff33b39 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 31 Jan 2017 10:21:31 +0100 Subject: drm/i915: Track pinned vma in intel_plane_state With atomic plane states we are able to track an allocation right from preparation, during use and through to the final free after being swapped out for a new plane. We can couple the VMA we pin for the framebuffer (and its rotation) to this lifetime and avoid all the clumsy lookups in between. v2: Remove residual vma on plane cleanup (Chris) v3: Add a description for the vma destruction in intel_plane_destroy_state (Maarten) References: https://bugs.freedesktop.org/show_bug.cgi?id=98829 Signed-off-by: Chris Wilson Signed-off-by: Maarten Lankhorst Link: http://patchwork.freedesktop.org/patch/msgid/20170116152131.18089-1-chris@chris-wilson.co.uk Acked-by: Joonas Lahtinen (cherry picked from commit be1e341513ca23b0668b7b0f26fa6e2ffc46ba20) Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1485854491-27389-3-git-send-email-maarten.lankhorst@linux.intel.com --- drivers/gpu/drm/i915/i915_drv.h | 16 +--- drivers/gpu/drm/i915/intel_atomic_plane.c | 20 +++++ drivers/gpu/drm/i915/intel_display.c | 125 ++++++++++-------------------- drivers/gpu/drm/i915/intel_drv.h | 9 ++- drivers/gpu/drm/i915/intel_fbc.c | 52 +++++-------- drivers/gpu/drm/i915/intel_fbdev.c | 4 +- drivers/gpu/drm/i915/intel_sprite.c | 8 +- 7 files changed, 99 insertions(+), 135 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 69bc3b0c4390..8493e19b563a 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1012,6 +1012,8 @@ struct intel_fbc { struct work_struct underrun_work; struct intel_fbc_state_cache { + struct i915_vma *vma; + struct { unsigned int mode_flags; uint32_t hsw_bdw_pixel_rate; @@ -1025,15 +1027,14 @@ struct intel_fbc { } plane; struct { - u64 ilk_ggtt_offset; uint32_t pixel_format; unsigned int stride; - int fence_reg; - unsigned int tiling_mode; } fb; } state_cache; struct intel_fbc_reg_params { + struct i915_vma *vma; + struct { enum pipe pipe; enum plane plane; @@ -1041,10 +1042,8 @@ struct intel_fbc { } crtc; struct { - u64 ggtt_offset; uint32_t pixel_format; unsigned int stride; - int fence_reg; } fb; int cfb_size; @@ -3168,13 +3167,6 @@ i915_gem_object_to_ggtt(struct drm_i915_gem_object *obj, return i915_gem_obj_to_vma(obj, &to_i915(obj->base.dev)->ggtt.base, view); } -static inline unsigned long -i915_gem_object_ggtt_offset(struct drm_i915_gem_object *o, - const struct i915_ggtt_view *view) -{ - return i915_ggtt_offset(i915_gem_object_to_ggtt(o, view)); -} - /* i915_gem_fence_reg.c */ int __must_check i915_vma_get_fence(struct i915_vma *vma); int __must_check i915_vma_put_fence(struct i915_vma *vma); diff --git a/drivers/gpu/drm/i915/intel_atomic_plane.c b/drivers/gpu/drm/i915/intel_atomic_plane.c index dbe9fb41ae53..8d3e515f27ba 100644 --- a/drivers/gpu/drm/i915/intel_atomic_plane.c +++ b/drivers/gpu/drm/i915/intel_atomic_plane.c @@ -85,6 +85,8 @@ intel_plane_duplicate_state(struct drm_plane *plane) __drm_atomic_helper_plane_duplicate_state(plane, state); + intel_state->vma = NULL; + return state; } @@ -100,6 +102,24 @@ void intel_plane_destroy_state(struct drm_plane *plane, struct drm_plane_state *state) { + struct i915_vma *vma; + + vma = fetch_and_zero(&to_intel_plane_state(state)->vma); + + /* + * FIXME: Normally intel_cleanup_plane_fb handles destruction of vma. + * We currently don't clear all planes during driver unload, so we have + * to be able to unpin vma here for now. + * + * Normally this can only happen during unload when kmscon is disabled + * and userspace doesn't attempt to set a framebuffer at all. + */ + if (vma) { + mutex_lock(&plane->dev->struct_mutex); + intel_unpin_fb_vma(vma); + mutex_unlock(&plane->dev->struct_mutex); + } + drm_atomic_helper_plane_destroy_state(plane, state); } diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index f0b9aa7a0483..f1e4a21d4664 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2235,27 +2235,22 @@ intel_pin_and_fence_fb_obj(struct drm_framebuffer *fb, unsigned int rotation) i915_vma_pin_fence(vma); } + i915_vma_get(vma); err: intel_runtime_pm_put(dev_priv); return vma; } -void intel_unpin_fb_obj(struct drm_framebuffer *fb, unsigned int rotation) +void intel_unpin_fb_vma(struct i915_vma *vma) { - struct drm_i915_gem_object *obj = intel_fb_obj(fb); - struct i915_ggtt_view view; - struct i915_vma *vma; - - WARN_ON(!mutex_is_locked(&obj->base.dev->struct_mutex)); - - intel_fill_fb_ggtt_view(&view, fb, rotation); - vma = i915_gem_object_to_ggtt(obj, &view); + lockdep_assert_held(&vma->vm->dev->struct_mutex); if (WARN_ON_ONCE(!vma)) return; i915_vma_unpin_fence(vma); i915_gem_object_unpin_from_display_plane(vma); + i915_vma_put(vma); } static int intel_fb_pitch(const struct drm_framebuffer *fb, int plane, @@ -2750,7 +2745,6 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc, struct drm_device *dev = intel_crtc->base.dev; struct drm_i915_private *dev_priv = to_i915(dev); struct drm_crtc *c; - struct intel_crtc *i; struct drm_i915_gem_object *obj; struct drm_plane *primary = intel_crtc->base.primary; struct drm_plane_state *plane_state = primary->state; @@ -2775,20 +2769,20 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc, * an fb with another CRTC instead */ for_each_crtc(dev, c) { - i = to_intel_crtc(c); + struct intel_plane_state *state; if (c == &intel_crtc->base) continue; - if (!i->active) + if (!to_intel_crtc(c)->active) continue; - fb = c->primary->fb; - if (!fb) + state = to_intel_plane_state(c->primary->state); + if (!state->vma) continue; - obj = intel_fb_obj(fb); - if (i915_gem_object_ggtt_offset(obj, NULL) == plane_config->base) { + if (intel_plane_ggtt_offset(state) == plane_config->base) { + fb = c->primary->fb; drm_framebuffer_reference(fb); goto valid_fb; } @@ -2809,6 +2803,19 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc, return; valid_fb: + mutex_lock(&dev->struct_mutex); + intel_state->vma = + intel_pin_and_fence_fb_obj(fb, primary->state->rotation); + mutex_unlock(&dev->struct_mutex); + if (IS_ERR(intel_state->vma)) { + DRM_ERROR("failed to pin boot fb on pipe %d: %li\n", + intel_crtc->pipe, PTR_ERR(intel_state->vma)); + + intel_state->vma = NULL; + drm_framebuffer_unreference(fb); + return; + } + plane_state->src_x = 0; plane_state->src_y = 0; plane_state->src_w = fb->width << 16; @@ -3104,13 +3111,13 @@ static void i9xx_update_primary_plane(struct drm_plane *primary, I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]); if (INTEL_GEN(dev_priv) >= 4) { I915_WRITE(DSPSURF(plane), - intel_fb_gtt_offset(fb, rotation) + + intel_plane_ggtt_offset(plane_state) + intel_crtc->dspaddr_offset); I915_WRITE(DSPTILEOFF(plane), (y << 16) | x); I915_WRITE(DSPLINOFF(plane), linear_offset); } else { I915_WRITE(DSPADDR(plane), - intel_fb_gtt_offset(fb, rotation) + + intel_plane_ggtt_offset(plane_state) + intel_crtc->dspaddr_offset); } POSTING_READ(reg); @@ -3207,7 +3214,7 @@ static void ironlake_update_primary_plane(struct drm_plane *primary, I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]); I915_WRITE(DSPSURF(plane), - intel_fb_gtt_offset(fb, rotation) + + intel_plane_ggtt_offset(plane_state) + intel_crtc->dspaddr_offset); if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) { I915_WRITE(DSPOFFSET(plane), (y << 16) | x); @@ -3230,23 +3237,6 @@ u32 intel_fb_stride_alignment(const struct drm_i915_private *dev_priv, } } -u32 intel_fb_gtt_offset(struct drm_framebuffer *fb, - unsigned int rotation) -{ - struct drm_i915_gem_object *obj = intel_fb_obj(fb); - struct i915_ggtt_view view; - struct i915_vma *vma; - - intel_fill_fb_ggtt_view(&view, fb, rotation); - - vma = i915_gem_object_to_ggtt(obj, &view); - if (WARN(!vma, "ggtt vma for display object not found! (view=%u)\n", - view.type)) - return -1; - - return i915_ggtt_offset(vma); -} - static void skl_detach_scaler(struct intel_crtc *intel_crtc, int id) { struct drm_device *dev = intel_crtc->base.dev; @@ -3441,7 +3431,7 @@ static void skylake_update_primary_plane(struct drm_plane *plane, } I915_WRITE(PLANE_SURF(pipe, 0), - intel_fb_gtt_offset(fb, rotation) + surf_addr); + intel_plane_ggtt_offset(plane_state) + surf_addr); POSTING_READ(PLANE_SURF(pipe, 0)); } @@ -11536,7 +11526,7 @@ static void intel_unpin_work_fn(struct work_struct *__work) flush_work(&work->mmio_work); mutex_lock(&dev->struct_mutex); - intel_unpin_fb_obj(work->old_fb, primary->state->rotation); + intel_unpin_fb_vma(work->old_vma); i915_gem_object_put(work->pending_flip_obj); mutex_unlock(&dev->struct_mutex); @@ -12246,8 +12236,10 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, goto cleanup_pending; } - work->gtt_offset = intel_fb_gtt_offset(fb, primary->state->rotation); - work->gtt_offset += intel_crtc->dspaddr_offset; + work->old_vma = to_intel_plane_state(primary->state)->vma; + to_intel_plane_state(primary->state)->vma = vma; + + work->gtt_offset = i915_ggtt_offset(vma) + intel_crtc->dspaddr_offset; work->rotation = crtc->primary->state->rotation; /* @@ -12301,7 +12293,8 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, cleanup_request: i915_add_request_no_flush(request); cleanup_unpin: - intel_unpin_fb_obj(fb, crtc->primary->state->rotation); + to_intel_plane_state(primary->state)->vma = work->old_vma; + intel_unpin_fb_vma(vma); cleanup_pending: atomic_dec(&intel_crtc->unpin_work_count); unlock: @@ -14794,6 +14787,8 @@ intel_prepare_plane_fb(struct drm_plane *plane, DRM_DEBUG_KMS("failed to pin object\n"); return PTR_ERR(vma); } + + to_intel_plane_state(new_state)->vma = vma; } return 0; @@ -14812,19 +14807,12 @@ void intel_cleanup_plane_fb(struct drm_plane *plane, struct drm_plane_state *old_state) { - struct drm_i915_private *dev_priv = to_i915(plane->dev); - struct intel_plane_state *old_intel_state; - struct drm_i915_gem_object *old_obj = intel_fb_obj(old_state->fb); - struct drm_i915_gem_object *obj = intel_fb_obj(plane->state->fb); - - old_intel_state = to_intel_plane_state(old_state); - - if (!obj && !old_obj) - return; + struct i915_vma *vma; - if (old_obj && (plane->type != DRM_PLANE_TYPE_CURSOR || - !INTEL_INFO(dev_priv)->cursor_needs_physical)) - intel_unpin_fb_obj(old_state->fb, old_state->rotation); + /* Should only be called after a successful intel_prepare_plane_fb()! */ + vma = fetch_and_zero(&to_intel_plane_state(old_state)->vma); + if (vma) + intel_unpin_fb_vma(vma); } int @@ -15166,7 +15154,7 @@ intel_update_cursor_plane(struct drm_plane *plane, if (!obj) addr = 0; else if (!INTEL_INFO(dev_priv)->cursor_needs_physical) - addr = i915_gem_object_ggtt_offset(obj, NULL); + addr = intel_plane_ggtt_offset(state); else addr = obj->phys_handle->busaddr; @@ -17066,41 +17054,12 @@ void intel_display_resume(struct drm_device *dev) void intel_modeset_gem_init(struct drm_device *dev) { struct drm_i915_private *dev_priv = to_i915(dev); - struct drm_crtc *c; - struct drm_i915_gem_object *obj; intel_init_gt_powersave(dev_priv); intel_modeset_init_hw(dev); intel_setup_overlay(dev_priv); - - /* - * Make sure any fbs we allocated at startup are properly - * pinned & fenced. When we do the allocation it's too early - * for this. - */ - for_each_crtc(dev, c) { - struct i915_vma *vma; - - obj = intel_fb_obj(c->primary->fb); - if (obj == NULL) - continue; - - mutex_lock(&dev->struct_mutex); - vma = intel_pin_and_fence_fb_obj(c->primary->fb, - c->primary->state->rotation); - mutex_unlock(&dev->struct_mutex); - if (IS_ERR(vma)) { - DRM_ERROR("failed to pin boot fb on pipe %d\n", - to_intel_crtc(c)->pipe); - drm_framebuffer_unreference(c->primary->fb); - c->primary->fb = NULL; - c->primary->crtc = c->primary->state->crtc = NULL; - update_state_fb(c->primary); - c->state->plane_mask &= ~(1 << drm_plane_index(c->primary)); - } - } } int intel_connector_register(struct drm_connector *connector) diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index cd72ae171eeb..03a2112004f9 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -377,6 +377,7 @@ struct intel_atomic_state { struct intel_plane_state { struct drm_plane_state base; struct drm_rect clip; + struct i915_vma *vma; struct { u32 offset; @@ -1046,6 +1047,7 @@ struct intel_flip_work { struct work_struct mmio_work; struct drm_crtc *crtc; + struct i915_vma *old_vma; struct drm_framebuffer *old_fb; struct drm_i915_gem_object *pending_flip_obj; struct drm_pending_vblank_event *event; @@ -1273,7 +1275,7 @@ void intel_release_load_detect_pipe(struct drm_connector *connector, struct drm_modeset_acquire_ctx *ctx); struct i915_vma * intel_pin_and_fence_fb_obj(struct drm_framebuffer *fb, unsigned int rotation); -void intel_unpin_fb_obj(struct drm_framebuffer *fb, unsigned int rotation); +void intel_unpin_fb_vma(struct i915_vma *vma); struct drm_framebuffer * __intel_framebuffer_create(struct drm_device *dev, struct drm_mode_fb_cmd2 *mode_cmd, @@ -1362,7 +1364,10 @@ void intel_mode_from_pipe_config(struct drm_display_mode *mode, int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state); int skl_max_scale(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state); -u32 intel_fb_gtt_offset(struct drm_framebuffer *fb, unsigned int rotation); +static inline u32 intel_plane_ggtt_offset(const struct intel_plane_state *state) +{ + return i915_ggtt_offset(state->vma); +} u32 skl_plane_ctl_format(uint32_t pixel_format); u32 skl_plane_ctl_tiling(uint64_t fb_modifier); diff --git a/drivers/gpu/drm/i915/intel_fbc.c b/drivers/gpu/drm/i915/intel_fbc.c index 62f215b12eb5..f3a1d6a5cabe 100644 --- a/drivers/gpu/drm/i915/intel_fbc.c +++ b/drivers/gpu/drm/i915/intel_fbc.c @@ -173,7 +173,7 @@ static void i8xx_fbc_activate(struct drm_i915_private *dev_priv) if (IS_I945GM(dev_priv)) fbc_ctl |= FBC_CTL_C3_IDLE; /* 945 needs special SR handling */ fbc_ctl |= (cfb_pitch & 0xff) << FBC_CTL_STRIDE_SHIFT; - fbc_ctl |= params->fb.fence_reg; + fbc_ctl |= params->vma->fence->id; I915_WRITE(FBC_CONTROL, fbc_ctl); } @@ -193,8 +193,8 @@ static void g4x_fbc_activate(struct drm_i915_private *dev_priv) else dpfc_ctl |= DPFC_CTL_LIMIT_1X; - if (params->fb.fence_reg != I915_FENCE_REG_NONE) { - dpfc_ctl |= DPFC_CTL_FENCE_EN | params->fb.fence_reg; + if (params->vma->fence) { + dpfc_ctl |= DPFC_CTL_FENCE_EN | params->vma->fence->id; I915_WRITE(DPFC_FENCE_YOFF, params->crtc.fence_y_offset); } else { I915_WRITE(DPFC_FENCE_YOFF, 0); @@ -251,13 +251,14 @@ static void ilk_fbc_activate(struct drm_i915_private *dev_priv) break; } - if (params->fb.fence_reg != I915_FENCE_REG_NONE) { + if (params->vma->fence) { dpfc_ctl |= DPFC_CTL_FENCE_EN; if (IS_GEN5(dev_priv)) - dpfc_ctl |= params->fb.fence_reg; + dpfc_ctl |= params->vma->fence->id; if (IS_GEN6(dev_priv)) { I915_WRITE(SNB_DPFC_CTL_SA, - SNB_CPU_FENCE_ENABLE | params->fb.fence_reg); + SNB_CPU_FENCE_ENABLE | + params->vma->fence->id); I915_WRITE(DPFC_CPU_FENCE_OFFSET, params->crtc.fence_y_offset); } @@ -269,7 +270,8 @@ static void ilk_fbc_activate(struct drm_i915_private *dev_priv) } I915_WRITE(ILK_DPFC_FENCE_YOFF, params->crtc.fence_y_offset); - I915_WRITE(ILK_FBC_RT_BASE, params->fb.ggtt_offset | ILK_FBC_RT_VALID); + I915_WRITE(ILK_FBC_RT_BASE, + i915_ggtt_offset(params->vma) | ILK_FBC_RT_VALID); /* enable it... */ I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl | DPFC_CTL_EN); @@ -319,10 +321,11 @@ static void gen7_fbc_activate(struct drm_i915_private *dev_priv) break; } - if (params->fb.fence_reg != I915_FENCE_REG_NONE) { + if (params->vma->fence) { dpfc_ctl |= IVB_DPFC_CTL_FENCE_EN; I915_WRITE(SNB_DPFC_CTL_SA, - SNB_CPU_FENCE_ENABLE | params->fb.fence_reg); + SNB_CPU_FENCE_ENABLE | + params->vma->fence->id); I915_WRITE(DPFC_CPU_FENCE_OFFSET, params->crtc.fence_y_offset); } else { I915_WRITE(SNB_DPFC_CTL_SA,0); @@ -727,14 +730,6 @@ static bool intel_fbc_hw_tracking_covers_screen(struct intel_crtc *crtc) return effective_w <= max_w && effective_h <= max_h; } -/* XXX replace me when we have VMA tracking for intel_plane_state */ -static int get_fence_id(struct drm_framebuffer *fb) -{ - struct i915_vma *vma = i915_gem_object_to_ggtt(intel_fb_obj(fb), NULL); - - return vma && vma->fence ? vma->fence->id : I915_FENCE_REG_NONE; -} - static void intel_fbc_update_state_cache(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state, struct intel_plane_state *plane_state) @@ -743,7 +738,8 @@ static void intel_fbc_update_state_cache(struct intel_crtc *crtc, struct intel_fbc *fbc = &dev_priv->fbc; struct intel_fbc_state_cache *cache = &fbc->state_cache; struct drm_framebuffer *fb = plane_state->base.fb; - struct drm_i915_gem_object *obj; + + cache->vma = NULL; cache->crtc.mode_flags = crtc_state->base.adjusted_mode.flags; if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) @@ -758,16 +754,10 @@ static void intel_fbc_update_state_cache(struct intel_crtc *crtc, if (!cache->plane.visible) return; - obj = intel_fb_obj(fb); - - /* FIXME: We lack the proper locking here, so only run this on the - * platforms that need. */ - if (IS_GEN(dev_priv, 5, 6)) - cache->fb.ilk_ggtt_offset = i915_gem_object_ggtt_offset(obj, NULL); cache->fb.pixel_format = fb->pixel_format; cache->fb.stride = fb->pitches[0]; - cache->fb.fence_reg = get_fence_id(fb); - cache->fb.tiling_mode = i915_gem_object_get_tiling(obj); + + cache->vma = plane_state->vma; } static bool intel_fbc_can_activate(struct intel_crtc *crtc) @@ -784,7 +774,7 @@ static bool intel_fbc_can_activate(struct intel_crtc *crtc) return false; } - if (!cache->plane.visible) { + if (!cache->vma) { fbc->no_fbc_reason = "primary plane not visible"; return false; } @@ -807,8 +797,7 @@ static bool intel_fbc_can_activate(struct intel_crtc *crtc) * so have no fence associated with it) due to aperture constaints * at the time of pinning. */ - if (cache->fb.tiling_mode != I915_TILING_X || - cache->fb.fence_reg == I915_FENCE_REG_NONE) { + if (!cache->vma->fence) { fbc->no_fbc_reason = "framebuffer not tiled or fenced"; return false; } @@ -888,17 +877,16 @@ static void intel_fbc_get_reg_params(struct intel_crtc *crtc, * zero. */ memset(params, 0, sizeof(*params)); + params->vma = cache->vma; + params->crtc.pipe = crtc->pipe; params->crtc.plane = crtc->plane; params->crtc.fence_y_offset = get_crtc_fence_y_offset(crtc); params->fb.pixel_format = cache->fb.pixel_format; params->fb.stride = cache->fb.stride; - params->fb.fence_reg = cache->fb.fence_reg; params->cfb_size = intel_fbc_calculate_cfb_size(dev_priv, cache); - - params->fb.ggtt_offset = cache->fb.ilk_ggtt_offset; } static bool intel_fbc_reg_params_equal(struct intel_fbc_reg_params *params1, diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c index 8cf2d80f2254..f4a8c4fc57c4 100644 --- a/drivers/gpu/drm/i915/intel_fbdev.c +++ b/drivers/gpu/drm/i915/intel_fbdev.c @@ -284,7 +284,7 @@ static int intelfb_create(struct drm_fb_helper *helper, out_destroy_fbi: drm_fb_helper_release_fbi(helper); out_unpin: - intel_unpin_fb_obj(&ifbdev->fb->base, DRM_ROTATE_0); + intel_unpin_fb_vma(vma); out_unlock: mutex_unlock(&dev->struct_mutex); return ret; @@ -549,7 +549,7 @@ static void intel_fbdev_destroy(struct intel_fbdev *ifbdev) if (ifbdev->fb) { mutex_lock(&ifbdev->helper.dev->struct_mutex); - intel_unpin_fb_obj(&ifbdev->fb->base, DRM_ROTATE_0); + intel_unpin_fb_vma(ifbdev->vma); mutex_unlock(&ifbdev->helper.dev->struct_mutex); drm_framebuffer_remove(&ifbdev->fb->base); diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index 8f131a08d440..242a73e66d82 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -273,7 +273,7 @@ skl_update_plane(struct drm_plane *drm_plane, I915_WRITE(PLANE_CTL(pipe, plane), plane_ctl); I915_WRITE(PLANE_SURF(pipe, plane), - intel_fb_gtt_offset(fb, rotation) + surf_addr); + intel_plane_ggtt_offset(plane_state) + surf_addr); POSTING_READ(PLANE_SURF(pipe, plane)); } @@ -458,7 +458,7 @@ vlv_update_plane(struct drm_plane *dplane, I915_WRITE(SPSIZE(pipe, plane), (crtc_h << 16) | crtc_w); I915_WRITE(SPCNTR(pipe, plane), sprctl); I915_WRITE(SPSURF(pipe, plane), - intel_fb_gtt_offset(fb, rotation) + sprsurf_offset); + intel_plane_ggtt_offset(plane_state) + sprsurf_offset); POSTING_READ(SPSURF(pipe, plane)); } @@ -594,7 +594,7 @@ ivb_update_plane(struct drm_plane *plane, I915_WRITE(SPRSCALE(pipe), sprscale); I915_WRITE(SPRCTL(pipe), sprctl); I915_WRITE(SPRSURF(pipe), - intel_fb_gtt_offset(fb, rotation) + sprsurf_offset); + intel_plane_ggtt_offset(plane_state) + sprsurf_offset); POSTING_READ(SPRSURF(pipe)); } @@ -721,7 +721,7 @@ ilk_update_plane(struct drm_plane *plane, I915_WRITE(DVSSCALE(pipe), dvsscale); I915_WRITE(DVSCNTR(pipe), dvscntr); I915_WRITE(DVSSURF(pipe), - intel_fb_gtt_offset(fb, rotation) + dvssurf_offset); + intel_plane_ggtt_offset(plane_state) + dvssurf_offset); POSTING_READ(DVSSURF(pipe)); } -- cgit v1.2.3 From 2da64d20a0b20046d688e44f4033efd09157e29d Mon Sep 17 00:00:00 2001 From: Alexey Kardashevskiy Date: Wed, 1 Feb 2017 14:26:16 +1100 Subject: vfio/spapr: Fix missing mutex unlock when creating a window Commit d9c728949ddc ("vfio/spapr: Postpone default window creation") added an additional exit to the VFIO_IOMMU_SPAPR_TCE_CREATE case and made it possible to return from tce_iommu_ioctl() without unlocking container->lock; this fixes the issue. Fixes: d9c728949ddc ("vfio/spapr: Postpone default window creation") Signed-off-by: Alexey Kardashevskiy Reviewed-by: David Gibson Signed-off-by: Alex Williamson --- drivers/vfio/vfio_iommu_spapr_tce.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/vfio/vfio_iommu_spapr_tce.c b/drivers/vfio/vfio_iommu_spapr_tce.c index 128d10282d16..7690e5bf3cf1 100644 --- a/drivers/vfio/vfio_iommu_spapr_tce.c +++ b/drivers/vfio/vfio_iommu_spapr_tce.c @@ -1123,12 +1123,11 @@ static long tce_iommu_ioctl(void *iommu_data, mutex_lock(&container->lock); ret = tce_iommu_create_default_window(container); - if (ret) - return ret; - - ret = tce_iommu_create_window(container, create.page_shift, - create.window_size, create.levels, - &create.start_addr); + if (!ret) + ret = tce_iommu_create_window(container, + create.page_shift, + create.window_size, create.levels, + &create.start_addr); mutex_unlock(&container->lock); -- cgit v1.2.3 From c8f325a59cfc718d13a50fbc746ed9b415c25e92 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Wed, 1 Feb 2017 17:45:02 +0000 Subject: efi/fdt: Avoid FDT manipulation after ExitBootServices() Some AArch64 UEFI implementations disable the MMU in ExitBootServices(), after which unaligned accesses to RAM are no longer supported. Commit: abfb7b686a3e ("efi/libstub/arm*: Pass latest memory map to the kernel") fixed an issue in the memory map handling of the stub FDT code, but inadvertently created an issue with such firmware, by moving some of the FDT manipulation to after the invocation of ExitBootServices(). Given that the stub's libfdt implementation uses the ordinary, accelerated string functions, which rely on hardware handling of unaligned accesses, manipulating the FDT with the MMU off may result in alignment faults. So fix the situation by moving the update_fdt_memmap() call into the callback function invoked by efi_exit_boot_services() right before it calls the ExitBootServices() UEFI service (which is arguably a better place for it anyway) Note that disabling the MMU in ExitBootServices() is not compliant with the UEFI spec, and carries great risk due to the fact that switching from cached to uncached memory accesses halfway through compiler generated code (i.e., involving a stack) can never be done in a way that is architecturally safe. Fixes: abfb7b686a3e ("efi/libstub/arm*: Pass latest memory map to the kernel") Signed-off-by: Ard Biesheuvel Tested-by: Riku Voipio Cc: Cc: mark.rutland@arm.com Cc: linux-efi@vger.kernel.org Cc: matt@codeblueprint.co.uk Cc: leif.lindholm@linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1485971102-23330-2-git-send-email-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar --- drivers/firmware/efi/libstub/fdt.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/efi/libstub/fdt.c b/drivers/firmware/efi/libstub/fdt.c index 921dfa047202..260c4b4b492e 100644 --- a/drivers/firmware/efi/libstub/fdt.c +++ b/drivers/firmware/efi/libstub/fdt.c @@ -187,6 +187,7 @@ static efi_status_t update_fdt_memmap(void *fdt, struct efi_boot_memmap *map) struct exit_boot_struct { efi_memory_desc_t *runtime_map; int *runtime_entry_count; + void *new_fdt_addr; }; static efi_status_t exit_boot_func(efi_system_table_t *sys_table_arg, @@ -202,7 +203,7 @@ static efi_status_t exit_boot_func(efi_system_table_t *sys_table_arg, efi_get_virtmap(*map->map, *map->map_size, *map->desc_size, p->runtime_map, p->runtime_entry_count); - return EFI_SUCCESS; + return update_fdt_memmap(p->new_fdt_addr, map); } /* @@ -300,22 +301,13 @@ efi_status_t allocate_new_fdt_and_exit_boot(efi_system_table_t *sys_table, priv.runtime_map = runtime_map; priv.runtime_entry_count = &runtime_entry_count; + priv.new_fdt_addr = (void *)*new_fdt_addr; status = efi_exit_boot_services(sys_table, handle, &map, &priv, exit_boot_func); if (status == EFI_SUCCESS) { efi_set_virtual_address_map_t *svam; - status = update_fdt_memmap((void *)*new_fdt_addr, &map); - if (status != EFI_SUCCESS) { - /* - * The kernel won't get far without the memory map, but - * may still be able to print something meaningful so - * return success here. - */ - return EFI_SUCCESS; - } - /* Install the new virtual address map */ svam = sys_table->runtime->set_virtual_address_map; status = svam(runtime_entry_count * desc_size, desc_size, -- cgit v1.2.3 From 3484ecbe0e9deb94afb0b9b6172d77e98eb72b94 Mon Sep 17 00:00:00 2001 From: Giovanni Cabiddu Date: Thu, 22 Dec 2016 15:00:12 +0000 Subject: crypto: qat - fix bar discovery for c62x Some accelerators of the c62x series have only two bars. This patch skips BAR0 if the accelerator does not have it. Cc: Signed-off-by: Giovanni Cabiddu Signed-off-by: Herbert Xu --- drivers/crypto/qat/qat_c62x/adf_drv.c | 2 +- drivers/crypto/qat/qat_common/adf_accel_devices.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/crypto/qat/qat_c62x/adf_drv.c b/drivers/crypto/qat/qat_c62x/adf_drv.c index bc5cbc193aae..5b2d78a5b5aa 100644 --- a/drivers/crypto/qat/qat_c62x/adf_drv.c +++ b/drivers/crypto/qat/qat_c62x/adf_drv.c @@ -233,7 +233,7 @@ static int adf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) &hw_data->accel_capabilities_mask); /* Find and map all the device's BARS */ - i = 0; + i = (hw_data->fuses & ADF_DEVICE_FUSECTL_MASK) ? 1 : 0; bar_mask = pci_select_bars(pdev, IORESOURCE_MEM); for_each_set_bit(bar_nr, (const unsigned long *)&bar_mask, ADF_PCI_MAX_BARS * 2) { diff --git a/drivers/crypto/qat/qat_common/adf_accel_devices.h b/drivers/crypto/qat/qat_common/adf_accel_devices.h index e8822536530b..33f0a6251e38 100644 --- a/drivers/crypto/qat/qat_common/adf_accel_devices.h +++ b/drivers/crypto/qat/qat_common/adf_accel_devices.h @@ -69,6 +69,7 @@ #define ADF_ERRSOU5 (0x3A000 + 0xD8) #define ADF_DEVICE_FUSECTL_OFFSET 0x40 #define ADF_DEVICE_LEGFUSE_OFFSET 0x4C +#define ADF_DEVICE_FUSECTL_MASK 0x80000000 #define ADF_PCI_MAX_BARS 3 #define ADF_DEVICE_NAME_LENGTH 32 #define ADF_ETR_MAX_RINGS_PER_BANK 16 -- cgit v1.2.3 From 685ce0626840e2673fe64ea8807684f7324fec5f Mon Sep 17 00:00:00 2001 From: Giovanni Cabiddu Date: Thu, 22 Dec 2016 15:00:24 +0000 Subject: crypto: qat - zero esram only for DH85x devices Zero embedded ram in DH85x devices. This is not needed for newer generations as it is done by HW. Cc: Signed-off-by: Giovanni Cabiddu Signed-off-by: Herbert Xu --- drivers/crypto/qat/qat_common/qat_hal.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/crypto/qat/qat_common/qat_hal.c b/drivers/crypto/qat/qat_common/qat_hal.c index 1e480f140663..8c4fd255a601 100644 --- a/drivers/crypto/qat/qat_common/qat_hal.c +++ b/drivers/crypto/qat/qat_common/qat_hal.c @@ -456,7 +456,7 @@ static int qat_hal_init_esram(struct icp_qat_fw_loader_handle *handle) unsigned int csr_val; int times = 30; - if (handle->pci_dev->device == ADF_C3XXX_PCI_DEVICE_ID) + if (handle->pci_dev->device != ADF_DH895XCC_PCI_DEVICE_ID) return 0; csr_val = ADF_CSR_RD(csr_addr, 0); @@ -716,7 +716,7 @@ int qat_hal_init(struct adf_accel_dev *accel_dev) (void __iomem *)((uintptr_t)handle->hal_cap_ae_xfer_csr_addr_v + LOCAL_TO_XFER_REG_OFFSET); handle->pci_dev = pci_info->pci_dev; - if (handle->pci_dev->device != ADF_C3XXX_PCI_DEVICE_ID) { + if (handle->pci_dev->device == ADF_DH895XCC_PCI_DEVICE_ID) { sram_bar = &pci_info->pci_bars[hw_data->get_sram_bar_id(hw_data)]; handle->hal_sram_addr_v = sram_bar->virt_addr; -- cgit v1.2.3 From 57bcd0a6364cd4eaa362d7ff1777e88ddf501602 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 27 Jan 2017 10:31:52 -0500 Subject: drm/amdgpu/si: fix crash on headless asics MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Missing check for crtcs present. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=193341 https://bugs.freedesktop.org/show_bug.cgi?id=99387 Reviewed-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c index e2b0b1646f99..0635829b18cf 100644 --- a/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c @@ -254,6 +254,9 @@ static void gmc_v6_0_mc_program(struct amdgpu_device *adev) } WREG32(mmHDP_REG_COHERENCY_FLUSH_CNTL, 0); + if (adev->mode_info.num_crtc) + amdgpu_display_set_vga_render_state(adev, false); + gmc_v6_0_mc_stop(adev, &save); if (gmc_v6_0_wait_for_idle((void *)adev)) { @@ -283,7 +286,6 @@ static void gmc_v6_0_mc_program(struct amdgpu_device *adev) dev_warn(adev->dev, "Wait for MC idle timedout !\n"); } gmc_v6_0_mc_resume(adev, &save); - amdgpu_display_set_vga_render_state(adev, false); } static int gmc_v6_0_mc_init(struct amdgpu_device *adev) -- cgit v1.2.3 From 51964e9e12d0a054002a1a0d1dec4f661c7aaf28 Mon Sep 17 00:00:00 2001 From: Michel Dänzer Date: Mon, 30 Jan 2017 12:06:35 +0900 Subject: drm/radeon: Fix vram_size/visible values in DRM_RADEON_GEM_INFO ioctl MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit vram_size is supposed to be the total amount of VRAM that can be used by userspace, which corresponds to the TTM VRAM manager size (which is normally the full amount of VRAM, but can be just the visible VRAM when DMA can't be used for BO migration for some reason). The above was incorrectly used for vram_visible before, resulting in generally too large values being reported. Reviewed-by: Christian König Reviewed-by: Nicolai Hähnle Reviewed-by: Alex Deucher Signed-off-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_drv.c | 3 ++- drivers/gpu/drm/radeon/radeon_gem.c | 4 ++-- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index e0c143b865f3..30bd4a6a9d46 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -97,9 +97,10 @@ * 2.46.0 - Add PFP_SYNC_ME support on evergreen * 2.47.0 - Add UVD_NO_OP register support * 2.48.0 - TA_CS_BC_BASE_ADDR allowed on SI + * 2.49.0 - DRM_RADEON_GEM_INFO ioctl returns correct vram_size/visible values */ #define KMS_DRIVER_MAJOR 2 -#define KMS_DRIVER_MINOR 48 +#define KMS_DRIVER_MINOR 49 #define KMS_DRIVER_PATCHLEVEL 0 int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags); int radeon_driver_unload_kms(struct drm_device *dev); diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c index 0bcffd8a7bd3..96683f5b2b1b 100644 --- a/drivers/gpu/drm/radeon/radeon_gem.c +++ b/drivers/gpu/drm/radeon/radeon_gem.c @@ -220,8 +220,8 @@ int radeon_gem_info_ioctl(struct drm_device *dev, void *data, man = &rdev->mman.bdev.man[TTM_PL_VRAM]; - args->vram_size = rdev->mc.real_vram_size; - args->vram_visible = (u64)man->size << PAGE_SHIFT; + args->vram_size = (u64)man->size << PAGE_SHIFT; + args->vram_visible = rdev->mc.visible_vram_size; args->vram_visible -= rdev->vram_pin_size; args->gart_size = rdev->mc.gtt_size; args->gart_size -= rdev->gart_pin_size; -- cgit v1.2.3 From f32b20e89e82c9ff1825fc5c5d69753ff5558ccd Mon Sep 17 00:00:00 2001 From: Martin KaFai Lau Date: Tue, 31 Jan 2017 22:35:32 -0800 Subject: mlx4: Fix memory leak after mlx4_en_update_priv() In mlx4_en_update_priv(), dst->tx_ring[t] and dst->tx_cq[t] are over-written by src->tx_ring[t] and src->tx_cq[t] without first calling kfree. One of the reproducible code paths is by doing 'ethtool -L'. The fix is to do the kfree in mlx4_en_free_resources(). Here is the kmemleak report: unreferenced object 0xffff880841211800 (size 2048): comm "ethtool", pid 3096, jiffies 4294716940 (age 528.353s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] kmemleak_alloc+0x28/0x50 [] kmem_cache_alloc_trace+0x103/0x260 [] mlx4_en_try_alloc_resources+0x118/0x1a0 [] mlx4_en_set_ringparam+0x169/0x210 [] dev_ethtool+0xae5/0x2190 [] dev_ioctl+0x168/0x6f0 [] sock_do_ioctl+0x42/0x50 [] sock_ioctl+0x21b/0x2d0 [] do_vfs_ioctl+0x93/0x6a0 [] SyS_ioctl+0x79/0x90 [] entry_SYSCALL_64_fastpath+0x18/0xad [] 0xffffffffffffffff unreferenced object 0xffff880841213000 (size 2048): comm "ethtool", pid 3096, jiffies 4294716940 (age 528.353s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] kmemleak_alloc+0x28/0x50 [] kmem_cache_alloc_trace+0x103/0x260 [] mlx4_en_try_alloc_resources+0x13b/0x1a0 [] mlx4_en_set_ringparam+0x169/0x210 [] dev_ethtool+0xae5/0x2190 [] dev_ioctl+0x168/0x6f0 [] sock_do_ioctl+0x42/0x50 [] sock_ioctl+0x21b/0x2d0 [] do_vfs_ioctl+0x93/0x6a0 [] SyS_ioctl+0x79/0x90 [] entry_SYSCALL_64_fastpath+0x18/0xad [] 0xffffffffffffffff (gdb) list *mlx4_en_try_alloc_resources+0x118 0xffffffff8170e0a8 is in mlx4_en_try_alloc_resources (drivers/net/ethernet/mellanox/mlx4/en_netdev.c:2145). 2140 if (!dst->tx_ring_num[t]) 2141 continue; 2142 2143 dst->tx_ring[t] = kzalloc(sizeof(struct mlx4_en_tx_ring *) * 2144 MAX_TX_RINGS, GFP_KERNEL); 2145 if (!dst->tx_ring[t]) 2146 goto err_free_tx; 2147 2148 dst->tx_cq[t] = kzalloc(sizeof(struct mlx4_en_cq *) * 2149 MAX_TX_RINGS, GFP_KERNEL); (gdb) list *mlx4_en_try_alloc_resources+0x13b 0xffffffff8170e0cb is in mlx4_en_try_alloc_resources (drivers/net/ethernet/mellanox/mlx4/en_netdev.c:2150). 2145 if (!dst->tx_ring[t]) 2146 goto err_free_tx; 2147 2148 dst->tx_cq[t] = kzalloc(sizeof(struct mlx4_en_cq *) * 2149 MAX_TX_RINGS, GFP_KERNEL); 2150 if (!dst->tx_cq[t]) { 2151 kfree(dst->tx_ring[t]); 2152 goto err_free_tx; 2153 } 2154 } Fixes: ec25bc04ed8e ("net/mlx4_en: Add resilience in low memory systems") Cc: Eugenia Emantayev Cc: Saeed Mahameed Cc: Tariq Toukan Signed-off-by: Martin KaFai Lau Reviewed-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 761f8b12399c..3abcead208d2 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -2042,6 +2042,8 @@ static void mlx4_en_free_resources(struct mlx4_en_priv *priv) if (priv->tx_cq[t] && priv->tx_cq[t][i]) mlx4_en_destroy_cq(priv, &priv->tx_cq[t][i]); } + kfree(priv->tx_ring[t]); + kfree(priv->tx_cq[t]); } for (i = 0; i < priv->rx_ring_num; i++) { @@ -2214,7 +2216,6 @@ void mlx4_en_destroy_netdev(struct net_device *dev) { struct mlx4_en_priv *priv = netdev_priv(dev); struct mlx4_en_dev *mdev = priv->mdev; - int t; en_dbg(DRV, priv, "Destroying netdev on port:%d\n", priv->port); @@ -2248,11 +2249,6 @@ void mlx4_en_destroy_netdev(struct net_device *dev) mlx4_en_free_resources(priv); mutex_unlock(&mdev->state_lock); - for (t = 0; t < MLX4_EN_NUM_TX_TYPES; t++) { - kfree(priv->tx_ring[t]); - kfree(priv->tx_cq[t]); - } - free_netdev(dev); } -- cgit v1.2.3 From 770f82253dbd7e6892a88018f2f6cd395f48d214 Mon Sep 17 00:00:00 2001 From: Martin KaFai Lau Date: Tue, 31 Jan 2017 22:35:33 -0800 Subject: mlx4: xdp_prog becomes inactive after ethtool '-L' or '-G' After calling mlx4_en_try_alloc_resources (e.g. by changing the number of rx-queues with ethtool -L), the existing xdp_prog becomes inactive. The bug is that the xdp_prog ptr has not been carried over from the old rx-queues to the new rx-queues Fixes: 47a38e155037 ("net/mlx4_en: add support for fast rx drop bpf program") Cc: Brenden Blanco Cc: Saeed Mahameed Cc: Tariq Toukan Signed-off-by: Martin KaFai Lau Reviewed-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 4 ++-- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 27 +++++++++++++++++++++---- drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 3 ++- 3 files changed, 27 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c index d5a9372ed84d..9aa422691954 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c @@ -1099,7 +1099,7 @@ static int mlx4_en_set_ringparam(struct net_device *dev, memcpy(&new_prof, priv->prof, sizeof(struct mlx4_en_port_profile)); new_prof.tx_ring_size = tx_size; new_prof.rx_ring_size = rx_size; - err = mlx4_en_try_alloc_resources(priv, tmp, &new_prof); + err = mlx4_en_try_alloc_resources(priv, tmp, &new_prof, true); if (err) goto out; @@ -1774,7 +1774,7 @@ static int mlx4_en_set_channels(struct net_device *dev, new_prof.tx_ring_num[TX_XDP] = xdp_count; new_prof.rx_ring_num = channel->rx_count; - err = mlx4_en_try_alloc_resources(priv, tmp, &new_prof); + err = mlx4_en_try_alloc_resources(priv, tmp, &new_prof, true); if (err) goto out; diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 3abcead208d2..3b4961a8e8e4 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -2186,9 +2186,11 @@ static void mlx4_en_update_priv(struct mlx4_en_priv *dst, int mlx4_en_try_alloc_resources(struct mlx4_en_priv *priv, struct mlx4_en_priv *tmp, - struct mlx4_en_port_profile *prof) + struct mlx4_en_port_profile *prof, + bool carry_xdp_prog) { - int t; + struct bpf_prog *xdp_prog; + int i, t; mlx4_en_copy_priv(tmp, priv, prof); @@ -2202,6 +2204,23 @@ int mlx4_en_try_alloc_resources(struct mlx4_en_priv *priv, } return -ENOMEM; } + + /* All rx_rings has the same xdp_prog. Pick the first one. */ + xdp_prog = rcu_dereference_protected( + priv->rx_ring[0]->xdp_prog, + lockdep_is_held(&priv->mdev->state_lock)); + + if (xdp_prog && carry_xdp_prog) { + xdp_prog = bpf_prog_add(xdp_prog, tmp->rx_ring_num); + if (IS_ERR(xdp_prog)) { + mlx4_en_free_resources(tmp); + return PTR_ERR(xdp_prog); + } + for (i = 0; i < tmp->rx_ring_num; i++) + rcu_assign_pointer(tmp->rx_ring[i]->xdp_prog, + xdp_prog); + } + return 0; } @@ -2751,7 +2770,7 @@ static int mlx4_xdp_set(struct net_device *dev, struct bpf_prog *prog) en_warn(priv, "Reducing the number of TX rings, to not exceed the max total rings number.\n"); } - err = mlx4_en_try_alloc_resources(priv, tmp, &new_prof); + err = mlx4_en_try_alloc_resources(priv, tmp, &new_prof, false); if (err) { if (prog) bpf_prog_sub(prog, priv->rx_ring_num - 1); @@ -3495,7 +3514,7 @@ int mlx4_en_reset_config(struct net_device *dev, memcpy(&new_prof, priv->prof, sizeof(struct mlx4_en_port_profile)); memcpy(&new_prof.hwtstamp_config, &ts_config, sizeof(ts_config)); - err = mlx4_en_try_alloc_resources(priv, tmp, &new_prof); + err = mlx4_en_try_alloc_resources(priv, tmp, &new_prof, true); if (err) goto out; diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index ba1c6cd0cc79..cec59bc264c9 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -679,7 +679,8 @@ void mlx4_en_set_stats_bitmap(struct mlx4_dev *dev, int mlx4_en_try_alloc_resources(struct mlx4_en_priv *priv, struct mlx4_en_priv *tmp, - struct mlx4_en_port_profile *prof); + struct mlx4_en_port_profile *prof, + bool carry_xdp_prog); void mlx4_en_safe_replace_resources(struct mlx4_en_priv *priv, struct mlx4_en_priv *tmp); -- cgit v1.2.3 From cafe8df8b9bc9aa3dffa827c1a6757c6cd36f657 Mon Sep 17 00:00:00 2001 From: Mao Wenan Date: Tue, 31 Jan 2017 18:46:43 -0800 Subject: net: phy: Fix lack of reference count on PHY driver There is currently no reference count being held on the PHY driver, which makes it possible to remove the PHY driver module while the PHY state machine is running and polling the PHY. This could cause crashes similar to this one to show up: [ 43.361162] BUG: unable to handle kernel NULL pointer dereference at 0000000000000140 [ 43.361162] IP: phy_state_machine+0x32/0x490 [ 43.361162] PGD 59dc067 [ 43.361162] PUD 0 [ 43.361162] [ 43.361162] Oops: 0000 [#1] SMP [ 43.361162] Modules linked in: dsa_loop [last unloaded: broadcom] [ 43.361162] CPU: 0 PID: 1299 Comm: kworker/0:3 Not tainted 4.10.0-rc5+ #415 [ 43.361162] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [ 43.361162] Workqueue: events_power_efficient phy_state_machine [ 43.361162] task: ffff880006782b80 task.stack: ffffc90000184000 [ 43.361162] RIP: 0010:phy_state_machine+0x32/0x490 [ 43.361162] RSP: 0018:ffffc90000187e18 EFLAGS: 00000246 [ 43.361162] RAX: 0000000000000000 RBX: ffff8800059e53c0 RCX: ffff880006a15c60 [ 43.361162] RDX: ffff880006782b80 RSI: 0000000000000000 RDI: ffff8800059e5428 [ 43.361162] RBP: ffffc90000187e48 R08: ffff880006a15c40 R09: 0000000000000000 [ 43.361162] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800059e5428 [ 43.361162] R13: ffff8800059e5000 R14: 0000000000000000 R15: ffff880006a15c40 [ 43.361162] FS: 0000000000000000(0000) GS:ffff880006a00000(0000) knlGS:0000000000000000 [ 43.361162] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 43.361162] CR2: 0000000000000140 CR3: 0000000005979000 CR4: 00000000000006f0 [ 43.361162] Call Trace: [ 43.361162] process_one_work+0x1b4/0x3e0 [ 43.361162] worker_thread+0x43/0x4d0 [ 43.361162] ? __schedule+0x17f/0x4e0 [ 43.361162] kthread+0xf7/0x130 [ 43.361162] ? process_one_work+0x3e0/0x3e0 [ 43.361162] ? kthread_create_on_node+0x40/0x40 [ 43.361162] ret_from_fork+0x29/0x40 [ 43.361162] Code: 56 41 55 41 54 4c 8d 67 68 53 4c 8d af 40 fc ff ff 48 89 fb 4c 89 e7 48 83 ec 08 e8 c9 9d 27 00 48 8b 83 60 ff ff ff 44 8b 73 98 <48> 8b 90 40 01 00 00 44 89 f0 48 85 d2 74 08 4c 89 ef ff d2 8b Keep references on the PHY driver module right before we are going to utilize it in phy_attach_direct(), and conversely when we don't use it anymore in phy_detach(). Signed-off-by: Mao Wenan [florian: rebase, rework commit message] Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 92b08383cafa..0d8f4d3847f6 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -920,6 +920,11 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, return -EIO; } + if (!try_module_get(d->driver->owner)) { + dev_err(&dev->dev, "failed to get the device driver module\n"); + return -EIO; + } + get_device(d); /* Assume that if there is no driver, that it doesn't @@ -977,6 +982,7 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, error: phy_detach(phydev); put_device(d); + module_put(d->driver->owner); if (ndev_owner != bus->owner) module_put(bus->owner); return err; @@ -1059,6 +1065,7 @@ void phy_detach(struct phy_device *phydev) bus = phydev->mdio.bus; put_device(&phydev->mdio.dev); + module_put(phydev->mdio.dev.driver->owner); if (ndev_owner != bus->owner) module_put(bus->owner); } -- cgit v1.2.3 From 94e1dab1c94715e18bb0bada503de3f3d7593076 Mon Sep 17 00:00:00 2001 From: Harsh Jain Date: Tue, 24 Jan 2017 10:34:32 +0530 Subject: crypto: chcr - Fix panic on dma_unmap_sg Save DMA mapped sg list addresses to request context buffer. Signed-off-by: Atul Gupta Signed-off-by: Herbert Xu --- drivers/crypto/chelsio/chcr_algo.c | 49 +++++++++++++++++++----------------- drivers/crypto/chelsio/chcr_crypto.h | 3 +++ 2 files changed, 29 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/crypto/chelsio/chcr_algo.c b/drivers/crypto/chelsio/chcr_algo.c index 2ed1e24b44a8..d29c2b45d3ab 100644 --- a/drivers/crypto/chelsio/chcr_algo.c +++ b/drivers/crypto/chelsio/chcr_algo.c @@ -158,7 +158,7 @@ int chcr_handle_resp(struct crypto_async_request *req, unsigned char *input, case CRYPTO_ALG_TYPE_AEAD: ctx_req.req.aead_req = (struct aead_request *)req; ctx_req.ctx.reqctx = aead_request_ctx(ctx_req.req.aead_req); - dma_unmap_sg(&u_ctx->lldi.pdev->dev, ctx_req.req.aead_req->dst, + dma_unmap_sg(&u_ctx->lldi.pdev->dev, ctx_req.ctx.reqctx->dst, ctx_req.ctx.reqctx->dst_nents, DMA_FROM_DEVICE); if (ctx_req.ctx.reqctx->skb) { kfree_skb(ctx_req.ctx.reqctx->skb); @@ -1362,8 +1362,7 @@ static struct sk_buff *create_authenc_wr(struct aead_request *req, struct chcr_wr *chcr_req; struct cpl_rx_phys_dsgl *phys_cpl; struct phys_sge_parm sg_param; - struct scatterlist *src, *dst; - struct scatterlist src_sg[2], dst_sg[2]; + struct scatterlist *src; unsigned int frags = 0, transhdr_len; unsigned int ivsize = crypto_aead_ivsize(tfm), dst_size = 0; unsigned int kctx_len = 0; @@ -1383,19 +1382,21 @@ static struct sk_buff *create_authenc_wr(struct aead_request *req, if (sg_nents_for_len(req->src, req->assoclen + req->cryptlen) < 0) goto err; - src = scatterwalk_ffwd(src_sg, req->src, req->assoclen); - dst = src; + src = scatterwalk_ffwd(reqctx->srcffwd, req->src, req->assoclen); + reqctx->dst = src; + if (req->src != req->dst) { err = chcr_copy_assoc(req, aeadctx); if (err) return ERR_PTR(err); - dst = scatterwalk_ffwd(dst_sg, req->dst, req->assoclen); + reqctx->dst = scatterwalk_ffwd(reqctx->dstffwd, req->dst, + req->assoclen); } if (get_aead_subtype(tfm) == CRYPTO_ALG_SUB_TYPE_AEAD_NULL) { null = 1; assoclen = 0; } - reqctx->dst_nents = sg_nents_for_len(dst, req->cryptlen + + reqctx->dst_nents = sg_nents_for_len(reqctx->dst, req->cryptlen + (op_type ? -authsize : authsize)); if (reqctx->dst_nents <= 0) { pr_err("AUTHENC:Invalid Destination sg entries\n"); @@ -1460,7 +1461,7 @@ static struct sk_buff *create_authenc_wr(struct aead_request *req, sg_param.obsize = req->cryptlen + (op_type ? -authsize : authsize); sg_param.qid = qid; sg_param.align = 0; - if (map_writesg_phys_cpl(&u_ctx->lldi.pdev->dev, phys_cpl, dst, + if (map_writesg_phys_cpl(&u_ctx->lldi.pdev->dev, phys_cpl, reqctx->dst, &sg_param)) goto dstmap_fail; @@ -1711,8 +1712,7 @@ static struct sk_buff *create_aead_ccm_wr(struct aead_request *req, struct chcr_wr *chcr_req; struct cpl_rx_phys_dsgl *phys_cpl; struct phys_sge_parm sg_param; - struct scatterlist *src, *dst; - struct scatterlist src_sg[2], dst_sg[2]; + struct scatterlist *src; unsigned int frags = 0, transhdr_len, ivsize = AES_BLOCK_SIZE; unsigned int dst_size = 0, kctx_len; unsigned int sub_type; @@ -1728,17 +1728,19 @@ static struct sk_buff *create_aead_ccm_wr(struct aead_request *req, if (sg_nents_for_len(req->src, req->assoclen + req->cryptlen) < 0) goto err; sub_type = get_aead_subtype(tfm); - src = scatterwalk_ffwd(src_sg, req->src, req->assoclen); - dst = src; + src = scatterwalk_ffwd(reqctx->srcffwd, req->src, req->assoclen); + reqctx->dst = src; + if (req->src != req->dst) { err = chcr_copy_assoc(req, aeadctx); if (err) { pr_err("AAD copy to destination buffer fails\n"); return ERR_PTR(err); } - dst = scatterwalk_ffwd(dst_sg, req->dst, req->assoclen); + reqctx->dst = scatterwalk_ffwd(reqctx->dstffwd, req->dst, + req->assoclen); } - reqctx->dst_nents = sg_nents_for_len(dst, req->cryptlen + + reqctx->dst_nents = sg_nents_for_len(reqctx->dst, req->cryptlen + (op_type ? -authsize : authsize)); if (reqctx->dst_nents <= 0) { pr_err("CCM:Invalid Destination sg entries\n"); @@ -1777,7 +1779,7 @@ static struct sk_buff *create_aead_ccm_wr(struct aead_request *req, sg_param.obsize = req->cryptlen + (op_type ? -authsize : authsize); sg_param.qid = qid; sg_param.align = 0; - if (map_writesg_phys_cpl(&u_ctx->lldi.pdev->dev, phys_cpl, dst, + if (map_writesg_phys_cpl(&u_ctx->lldi.pdev->dev, phys_cpl, reqctx->dst, &sg_param)) goto dstmap_fail; @@ -1809,8 +1811,7 @@ static struct sk_buff *create_gcm_wr(struct aead_request *req, struct chcr_wr *chcr_req; struct cpl_rx_phys_dsgl *phys_cpl; struct phys_sge_parm sg_param; - struct scatterlist *src, *dst; - struct scatterlist src_sg[2], dst_sg[2]; + struct scatterlist *src; unsigned int frags = 0, transhdr_len; unsigned int ivsize = AES_BLOCK_SIZE; unsigned int dst_size = 0, kctx_len; @@ -1832,13 +1833,14 @@ static struct sk_buff *create_gcm_wr(struct aead_request *req, if (sg_nents_for_len(req->src, req->assoclen + req->cryptlen) < 0) goto err; - src = scatterwalk_ffwd(src_sg, req->src, req->assoclen); - dst = src; + src = scatterwalk_ffwd(reqctx->srcffwd, req->src, req->assoclen); + reqctx->dst = src; if (req->src != req->dst) { err = chcr_copy_assoc(req, aeadctx); if (err) return ERR_PTR(err); - dst = scatterwalk_ffwd(dst_sg, req->dst, req->assoclen); + reqctx->dst = scatterwalk_ffwd(reqctx->dstffwd, req->dst, + req->assoclen); } if (!req->cryptlen) @@ -1848,7 +1850,7 @@ static struct sk_buff *create_gcm_wr(struct aead_request *req, crypt_len = AES_BLOCK_SIZE; else crypt_len = req->cryptlen; - reqctx->dst_nents = sg_nents_for_len(dst, req->cryptlen + + reqctx->dst_nents = sg_nents_for_len(reqctx->dst, req->cryptlen + (op_type ? -authsize : authsize)); if (reqctx->dst_nents <= 0) { pr_err("GCM:Invalid Destination sg entries\n"); @@ -1923,7 +1925,7 @@ static struct sk_buff *create_gcm_wr(struct aead_request *req, sg_param.obsize = req->cryptlen + (op_type ? -authsize : authsize); sg_param.qid = qid; sg_param.align = 0; - if (map_writesg_phys_cpl(&u_ctx->lldi.pdev->dev, phys_cpl, dst, + if (map_writesg_phys_cpl(&u_ctx->lldi.pdev->dev, phys_cpl, reqctx->dst, &sg_param)) goto dstmap_fail; @@ -1937,7 +1939,8 @@ static struct sk_buff *create_gcm_wr(struct aead_request *req, write_sg_to_skb(skb, &frags, src, req->cryptlen); } else { aes_gcm_empty_pld_pad(req->dst, authsize - 1); - write_sg_to_skb(skb, &frags, dst, crypt_len); + write_sg_to_skb(skb, &frags, reqctx->dst, crypt_len); + } create_wreq(ctx, chcr_req, req, skb, kctx_len, size, 1, diff --git a/drivers/crypto/chelsio/chcr_crypto.h b/drivers/crypto/chelsio/chcr_crypto.h index d5af7d64a763..7ec0a8f12475 100644 --- a/drivers/crypto/chelsio/chcr_crypto.h +++ b/drivers/crypto/chelsio/chcr_crypto.h @@ -158,6 +158,9 @@ struct ablk_ctx { }; struct chcr_aead_reqctx { struct sk_buff *skb; + struct scatterlist *dst; + struct scatterlist srcffwd[2]; + struct scatterlist dstffwd[2]; short int dst_nents; u16 verify; u8 iv[CHCR_MAX_CRYPTO_IV_LEN]; -- cgit v1.2.3 From f5f7bebc91ab378dea5aad5277c4d283e46472d9 Mon Sep 17 00:00:00 2001 From: Harsh Jain Date: Tue, 24 Jan 2017 10:34:33 +0530 Subject: crypto: chcr - Check device is allocated before use Ensure dev is allocated for crypto uld context before using the device for crypto operations. Cc: Signed-off-by: Atul Gupta Signed-off-by: Herbert Xu --- drivers/crypto/chelsio/chcr_core.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/crypto/chelsio/chcr_core.c b/drivers/crypto/chelsio/chcr_core.c index 918da8e6e2d8..1c65f07e1cc9 100644 --- a/drivers/crypto/chelsio/chcr_core.c +++ b/drivers/crypto/chelsio/chcr_core.c @@ -52,6 +52,7 @@ static struct cxgb4_uld_info chcr_uld_info = { int assign_chcr_device(struct chcr_dev **dev) { struct uld_ctx *u_ctx; + int ret = -ENXIO; /* * Which device to use if multiple devices are available TODO @@ -59,15 +60,14 @@ int assign_chcr_device(struct chcr_dev **dev) * must go to the same device to maintain the ordering. */ mutex_lock(&dev_mutex); /* TODO ? */ - u_ctx = list_first_entry(&uld_ctx_list, struct uld_ctx, entry); - if (!u_ctx) { - mutex_unlock(&dev_mutex); - return -ENXIO; + list_for_each_entry(u_ctx, &uld_ctx_list, entry) + if (u_ctx && u_ctx->dev) { + *dev = u_ctx->dev; + ret = 0; + break; } - - *dev = u_ctx->dev; mutex_unlock(&dev_mutex); - return 0; + return ret; } static int chcr_dev_add(struct uld_ctx *u_ctx) @@ -202,10 +202,8 @@ static int chcr_uld_state_change(void *handle, enum cxgb4_state state) static int __init chcr_crypto_init(void) { - if (cxgb4_register_uld(CXGB4_ULD_CRYPTO, &chcr_uld_info)) { + if (cxgb4_register_uld(CXGB4_ULD_CRYPTO, &chcr_uld_info)) pr_err("ULD register fail: No chcr crypto support in cxgb4"); - return -1; - } return 0; } -- cgit v1.2.3 From 500c0106e638e08c2c661c305ed57d6b67e10908 Mon Sep 17 00:00:00 2001 From: Gary R Hook Date: Fri, 27 Jan 2017 15:28:45 -0600 Subject: crypto: ccp - Fix DMA operations when IOMMU is enabled An I/O page fault occurs when the IOMMU is enabled on a system that supports the v5 CCP. DMA operations use a Request ID value that does not match what is expected by the IOMMU, resulting in the I/O page fault. Setting the Request ID value to 0 corrects this issue. Cc: Signed-off-by: Gary R Hook Signed-off-by: Herbert Xu --- drivers/crypto/ccp/ccp-dev-v5.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/crypto/ccp/ccp-dev-v5.c b/drivers/crypto/ccp/ccp-dev-v5.c index e2ce8190ecc9..612898b4aaad 100644 --- a/drivers/crypto/ccp/ccp-dev-v5.c +++ b/drivers/crypto/ccp/ccp-dev-v5.c @@ -959,7 +959,7 @@ static irqreturn_t ccp5_irq_handler(int irq, void *data) static void ccp5_config(struct ccp_device *ccp) { /* Public side */ - iowrite32(0x00001249, ccp->io_regs + CMD5_REQID_CONFIG_OFFSET); + iowrite32(0x0, ccp->io_regs + CMD5_REQID_CONFIG_OFFSET); } static void ccp5other_config(struct ccp_device *ccp) -- cgit v1.2.3 From e5da5c5667381d2772374ee6a2967b3576c9483d Mon Sep 17 00:00:00 2001 From: Gary R Hook Date: Fri, 27 Jan 2017 17:09:04 -0600 Subject: crypto: ccp - Fix double add when creating new DMA command Eliminate a double-add by creating a new list to manage command descriptors when created; move the descriptor to the pending list when the command is submitted. Cc: Signed-off-by: Gary R Hook Signed-off-by: Herbert Xu --- drivers/crypto/ccp/ccp-dev.h | 1 + drivers/crypto/ccp/ccp-dmaengine.c | 6 +++++- 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/crypto/ccp/ccp-dev.h b/drivers/crypto/ccp/ccp-dev.h index 830f35e6005f..649e5610a5ce 100644 --- a/drivers/crypto/ccp/ccp-dev.h +++ b/drivers/crypto/ccp/ccp-dev.h @@ -238,6 +238,7 @@ struct ccp_dma_chan { struct ccp_device *ccp; spinlock_t lock; + struct list_head created; struct list_head pending; struct list_head active; struct list_head complete; diff --git a/drivers/crypto/ccp/ccp-dmaengine.c b/drivers/crypto/ccp/ccp-dmaengine.c index 6553912804f7..e5d9278f4019 100644 --- a/drivers/crypto/ccp/ccp-dmaengine.c +++ b/drivers/crypto/ccp/ccp-dmaengine.c @@ -63,6 +63,7 @@ static void ccp_free_chan_resources(struct dma_chan *dma_chan) ccp_free_desc_resources(chan->ccp, &chan->complete); ccp_free_desc_resources(chan->ccp, &chan->active); ccp_free_desc_resources(chan->ccp, &chan->pending); + ccp_free_desc_resources(chan->ccp, &chan->created); spin_unlock_irqrestore(&chan->lock, flags); } @@ -273,6 +274,7 @@ static dma_cookie_t ccp_tx_submit(struct dma_async_tx_descriptor *tx_desc) spin_lock_irqsave(&chan->lock, flags); cookie = dma_cookie_assign(tx_desc); + list_del(&desc->entry); list_add_tail(&desc->entry, &chan->pending); spin_unlock_irqrestore(&chan->lock, flags); @@ -426,7 +428,7 @@ static struct ccp_dma_desc *ccp_create_desc(struct dma_chan *dma_chan, spin_lock_irqsave(&chan->lock, sflags); - list_add_tail(&desc->entry, &chan->pending); + list_add_tail(&desc->entry, &chan->created); spin_unlock_irqrestore(&chan->lock, sflags); @@ -610,6 +612,7 @@ static int ccp_terminate_all(struct dma_chan *dma_chan) /*TODO: Purge the complete list? */ ccp_free_desc_resources(chan->ccp, &chan->active); ccp_free_desc_resources(chan->ccp, &chan->pending); + ccp_free_desc_resources(chan->ccp, &chan->created); spin_unlock_irqrestore(&chan->lock, flags); @@ -679,6 +682,7 @@ int ccp_dmaengine_register(struct ccp_device *ccp) chan->ccp = ccp; spin_lock_init(&chan->lock); + INIT_LIST_HEAD(&chan->created); INIT_LIST_HEAD(&chan->pending); INIT_LIST_HEAD(&chan->active); INIT_LIST_HEAD(&chan->complete); -- cgit v1.2.3 From 7c2cf1c4615cc2f576d0604406cdf0065f00b83b Mon Sep 17 00:00:00 2001 From: Harsh Jain Date: Fri, 27 Jan 2017 16:09:06 +0530 Subject: crypto: chcr - Fix key length for RFC4106 Check keylen before copying salt to avoid wrap around of Integer. Signed-off-by: Harsh Jain Signed-off-by: Herbert Xu --- drivers/crypto/chelsio/chcr_algo.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/crypto/chelsio/chcr_algo.c b/drivers/crypto/chelsio/chcr_algo.c index d29c2b45d3ab..b4b78b37f8a6 100644 --- a/drivers/crypto/chelsio/chcr_algo.c +++ b/drivers/crypto/chelsio/chcr_algo.c @@ -2192,8 +2192,8 @@ static int chcr_gcm_setkey(struct crypto_aead *aead, const u8 *key, unsigned int ck_size; int ret = 0, key_ctx_size = 0; - if (get_aead_subtype(aead) == - CRYPTO_ALG_SUB_TYPE_AEAD_RFC4106) { + if (get_aead_subtype(aead) == CRYPTO_ALG_SUB_TYPE_AEAD_RFC4106 && + keylen > 3) { keylen -= 4; /* nonce/salt is present in the last 4 bytes */ memcpy(aeadctx->salt, key + keylen, 4); } -- cgit v1.2.3 From d19a55ccad15a486ffe03030570744e5d5bd9f8e Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Fri, 6 Jan 2017 15:33:14 -0500 Subject: dm mpath: cleanup -Wbool-operation warning in choose_pgpath() Reported-by: David Binderman Signed-off-by: Mike Snitzer --- drivers/md/dm-mpath.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 6400cffb986d..3570bcb7a4a4 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -427,7 +427,7 @@ static struct pgpath *choose_pgpath(struct multipath *m, size_t nr_bytes) unsigned long flags; struct priority_group *pg; struct pgpath *pgpath; - bool bypassed = true; + unsigned bypassed = 1; if (!atomic_read(&m->nr_valid_paths)) { clear_bit(MPATHF_QUEUE_IO, &m->flags); @@ -466,7 +466,7 @@ check_current_pg: */ do { list_for_each_entry(pg, &m->priority_groups, list) { - if (pg->bypassed == bypassed) + if (pg->bypassed == !!bypassed) continue; pgpath = choose_path_in_pg(m, pg, nr_bytes); if (!IS_ERR_OR_NULL(pgpath)) { -- cgit v1.2.3 From 4087a1fffe38106e10646606a27f10d40451862d Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Wed, 25 Jan 2017 16:24:52 +0100 Subject: dm rq: cope with DM device destruction while in dm_old_request_fn() Fixes a crash in dm_table_find_target() due to a NULL struct dm_table being passed from dm_old_request_fn() that races with DM device destruction. Reported-by: artem@flashgrid.io Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org --- drivers/md/dm-rq.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/md/dm-rq.c b/drivers/md/dm-rq.c index 9d7275fb541a..6e702fc69a83 100644 --- a/drivers/md/dm-rq.c +++ b/drivers/md/dm-rq.c @@ -779,6 +779,10 @@ static void dm_old_request_fn(struct request_queue *q) int srcu_idx; struct dm_table *map = dm_get_live_table(md, &srcu_idx); + if (unlikely(!map)) { + dm_put_live_table(md, srcu_idx); + return; + } ti = dm_table_find_target(map, pos); dm_put_live_table(md, srcu_idx); } -- cgit v1.2.3 From f5b0cba8f23915e92932f11eb063e37d70556a89 Mon Sep 17 00:00:00 2001 From: Ondrej Kozina Date: Tue, 31 Jan 2017 15:47:11 +0100 Subject: dm crypt: replace RCU read-side section with rwsem The lockdep splat below hints at a bug in RCU usage in dm-crypt that was introduced with commit c538f6ec9f56 ("dm crypt: add ability to use keys from the kernel key retention service"). The kernel keyring function user_key_payload() is in fact a wrapper for rcu_dereference_protected() which must not be called with only rcu_read_lock() section mark. Unfortunately the kernel keyring subsystem doesn't currently provide an interface that allows the use of an RCU read-side section. So for now we must drop RCU in favour of rwsem until a proper function is made available in the kernel keyring subsystem. =============================== [ INFO: suspicious RCU usage. ] 4.10.0-rc5 #2 Not tainted ------------------------------- ./include/keys/user-type.h:53 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by cryptsetup/6464: #0: (&md->type_lock){+.+.+.}, at: [] dm_lock_md_type+0x12/0x20 [dm_mod] #1: (rcu_read_lock){......}, at: [] crypt_set_key+0x1d8/0x4b0 [dm_crypt] stack backtrace: CPU: 1 PID: 6464 Comm: cryptsetup Not tainted 4.10.0-rc5 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.1-1.fc24 04/01/2014 Call Trace: dump_stack+0x67/0x92 lockdep_rcu_suspicious+0xc5/0x100 crypt_set_key+0x351/0x4b0 [dm_crypt] ? crypt_set_key+0x1d8/0x4b0 [dm_crypt] crypt_ctr+0x341/0xa53 [dm_crypt] dm_table_add_target+0x147/0x330 [dm_mod] table_load+0x111/0x350 [dm_mod] ? retrieve_status+0x1c0/0x1c0 [dm_mod] ctl_ioctl+0x1f5/0x510 [dm_mod] dm_ctl_ioctl+0xe/0x20 [dm_mod] do_vfs_ioctl+0x8e/0x690 ? ____fput+0x9/0x10 ? task_work_run+0x7e/0xa0 ? trace_hardirqs_on_caller+0x122/0x1b0 SyS_ioctl+0x3c/0x70 entry_SYSCALL_64_fastpath+0x18/0xad RIP: 0033:0x7f392c9a4ec7 RSP: 002b:00007ffef6383378 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffef63830a0 RCX: 00007f392c9a4ec7 RDX: 000000000124fcc0 RSI: 00000000c138fd09 RDI: 0000000000000005 RBP: 00007ffef6383090 R08: 00000000ffffffff R09: 00000000012482b0 R10: 2a28205d34383336 R11: 0000000000000246 R12: 00007f392d803a08 R13: 00007ffef63831e0 R14: 0000000000000000 R15: 00007f392d803a0b Fixes: c538f6ec9f56 ("dm crypt: add ability to use keys from the kernel key retention service") Reported-by: Milan Broz Signed-off-by: Ondrej Kozina Reviewed-by: Mikulas Patocka Signed-off-by: Mike Snitzer --- drivers/md/dm-crypt.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 7c6c57216bf2..8a9f742d8ed7 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -1534,18 +1534,18 @@ static int crypt_set_keyring_key(struct crypt_config *cc, const char *key_string return PTR_ERR(key); } - rcu_read_lock(); + down_read(&key->sem); ukp = user_key_payload(key); if (!ukp) { - rcu_read_unlock(); + up_read(&key->sem); key_put(key); kzfree(new_key_string); return -EKEYREVOKED; } if (cc->key_size != ukp->datalen) { - rcu_read_unlock(); + up_read(&key->sem); key_put(key); kzfree(new_key_string); return -EINVAL; @@ -1553,7 +1553,7 @@ static int crypt_set_keyring_key(struct crypt_config *cc, const char *key_string memcpy(cc->key, ukp->data, cc->key_size); - rcu_read_unlock(); + up_read(&key->sem); key_put(key); /* clear the flag since following operations may invalidate previously valid key */ -- cgit v1.2.3 From e471486c13b82b1338d49c798f78bb62b1ed0a9e Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 2 Feb 2017 10:31:00 -0800 Subject: acpi, nfit: fix acpi_nfit_flush_probe() crash We queue an on-stack work item to 'nfit_wq' and wait for it to complete as part of a 'flush_probe' request. However, if the user cancels the wait we need to make sure the item is flushed from the queue otherwise we are leaving an out-of-scope stack address on the work list. BUG: unable to handle kernel paging request at ffffbcb3c72f7cd0 IP: [] __list_add+0x1b/0xb0 [..] RIP: 0010:[] [] __list_add+0x1b/0xb0 RSP: 0018:ffffbcb3c7ba7c00 EFLAGS: 00010046 [..] Call Trace: [] insert_work+0x3a/0xc0 [] ? seq_open+0x5a/0xa0 [] __queue_work+0x16a/0x460 [] queue_work_on+0x38/0x40 [] acpi_nfit_flush_probe+0x95/0xc0 [nfit] [] ? nfit_visible+0x40/0x40 [nfit] [] wait_probe_show+0x25/0x60 [] dev_attr_show+0x20/0x50 Fixes: 7ae0fa439faf ("nfit, libnvdimm: async region scrub workqueue") Cc: Reviewed-by: Vishal Verma Signed-off-by: Dan Williams --- drivers/acpi/nfit/core.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c index 2f82b8eba360..7361d00818e2 100644 --- a/drivers/acpi/nfit/core.c +++ b/drivers/acpi/nfit/core.c @@ -2704,6 +2704,7 @@ static int acpi_nfit_flush_probe(struct nvdimm_bus_descriptor *nd_desc) struct acpi_nfit_desc *acpi_desc = to_acpi_nfit_desc(nd_desc); struct device *dev = acpi_desc->dev; struct acpi_nfit_flush_work flush; + int rc; /* bounce the device lock to flush acpi_nfit_add / acpi_nfit_notify */ device_lock(dev); @@ -2716,7 +2717,10 @@ static int acpi_nfit_flush_probe(struct nvdimm_bus_descriptor *nd_desc) INIT_WORK_ONSTACK(&flush.work, flush_probe); COMPLETION_INITIALIZER_ONSTACK(flush.cmp); queue_work(nfit_wq, &flush.work); - return wait_for_completion_interruptible(&flush.cmp); + + rc = wait_for_completion_interruptible(&flush.cmp); + cancel_work_sync(&flush.work); + return rc; } static int acpi_nfit_clear_to_send(struct nvdimm_bus_descriptor *nd_desc, -- cgit v1.2.3 From 0d5415b489f68b58e1983a53793d25d53098ed4b Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Fri, 3 Feb 2017 05:43:52 +0200 Subject: Revert "vring: Force use of DMA API for ARM-based systems with legacy devices" This reverts commit c7070619f3408d9a0dffbed9149e6f00479cf43b. This has been shown to regress on some ARM systems: by forcing on DMA API usage for ARM systems, we have inadvertently kicked open a hornets' nest in terms of cache-coherency. Namely that unless the virtio device is explicitly described as capable of coherent DMA by firmware, the DMA APIs on ARM and other DT-based platforms will assume it is non-coherent. This turns out to cause a big problem for the likes of QEMU and kvmtool, which generate virtio-mmio devices in their guest DTs but neglect to add the often-overlooked "dma-coherent" property; as a result, we end up with the guest making non-cacheable accesses to the vring, the host doing so cacheably, both talking past each other and things going horribly wrong. We are working on a safer work-around. Fixes: c7070619f340 ("vring: Force use of DMA API for ARM-based systems with legacy devices") Reported-by: Robin Murphy Cc: Signed-off-by: Will Deacon Signed-off-by: Michael S. Tsirkin Acked-by: Marc Zyngier --- drivers/virtio/virtio_ring.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers') diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c index 7e38ed79c3fc..409aeaa49246 100644 --- a/drivers/virtio/virtio_ring.c +++ b/drivers/virtio/virtio_ring.c @@ -159,13 +159,6 @@ static bool vring_use_dma_api(struct virtio_device *vdev) if (xen_domain()) return true; - /* - * On ARM-based machines, the DMA ops will do the right thing, - * so always use them with legacy devices. - */ - if (IS_ENABLED(CONFIG_ARM) || IS_ENABLED(CONFIG_ARM64)) - return !virtio_has_feature(vdev, VIRTIO_F_VERSION_1); - return false; } -- cgit v1.2.3 From cda8bba0f99d25d2061c531113c14fa41effc3ae Mon Sep 17 00:00:00 2001 From: Halil Pasic Date: Mon, 30 Jan 2017 11:09:36 +0100 Subject: vhost: fix initialization for vq->is_le Currently, under certain circumstances vhost_init_is_le does just a part of the initialization job, and depends on vhost_reset_is_le being called too. For this reason vhost_vq_init_access used to call vhost_reset_is_le when vq->private_data is NULL. This is not only counter intuitive, but also real a problem because it breaks vhost_net. The bug was introduced to vhost_net with commit 2751c9882b94 ("vhost: cross-endian support for legacy devices"). The symptom is corruption of the vq's used.idx field (virtio) after VHOST_NET_SET_BACKEND was issued as a part of the vhost shutdown on a vq with pending descriptors. Let us make sure the outcome of vhost_init_is_le never depend on the state it is actually supposed to initialize, and fix virtio_net by removing the reset from vhost_vq_init_access. With the above, there is no reason for vhost_reset_is_le to do just half of the job. Let us make vhost_reset_is_le reinitialize is_le. Signed-off-by: Halil Pasic Reported-by: Michael A. Tebolt Reported-by: Dr. David Alan Gilbert Fixes: commit 2751c9882b94 ("vhost: cross-endian support for legacy devices") Cc: Signed-off-by: Michael S. Tsirkin Reviewed-by: Greg Kurz Tested-by: Michael A. Tebolt --- drivers/vhost/vhost.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index d6432603880c..8f99fe08de02 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -130,14 +130,14 @@ static long vhost_get_vring_endian(struct vhost_virtqueue *vq, u32 idx, static void vhost_init_is_le(struct vhost_virtqueue *vq) { - if (vhost_has_feature(vq, VIRTIO_F_VERSION_1)) - vq->is_le = true; + vq->is_le = vhost_has_feature(vq, VIRTIO_F_VERSION_1) + || virtio_legacy_is_little_endian(); } #endif /* CONFIG_VHOST_CROSS_ENDIAN_LEGACY */ static void vhost_reset_is_le(struct vhost_virtqueue *vq) { - vq->is_le = virtio_legacy_is_little_endian(); + vhost_init_is_le(vq); } struct vhost_flush_struct { @@ -1714,10 +1714,8 @@ int vhost_vq_init_access(struct vhost_virtqueue *vq) int r; bool is_le = vq->is_le; - if (!vq->private_data) { - vhost_reset_is_le(vq); + if (!vq->private_data) return 0; - } vhost_init_is_le(vq); -- cgit v1.2.3 From a96dfddbcc04336bbed50dc2b24823e45e09e80c Mon Sep 17 00:00:00 2001 From: Toshi Kani Date: Fri, 3 Feb 2017 13:13:23 -0800 Subject: base/memory, hotplug: fix a kernel oops in show_valid_zones() Reading a sysfs "memoryN/valid_zones" file leads to the following oops when the first page of a range is not backed by struct page. show_valid_zones() assumes that 'start_pfn' is always valid for page_zone(). BUG: unable to handle kernel paging request at ffffea017a000000 IP: show_valid_zones+0x6f/0x160 This issue may happen on x86-64 systems with 64GiB or more memory since their memory block size is bumped up to 2GiB. [1] An example of such systems is desribed below. 0x3240000000 is only aligned by 1GiB and this memory block starts from 0x3200000000, which is not backed by struct page. BIOS-e820: [mem 0x0000003240000000-0x000000603fffffff] usable Since test_pages_in_a_zone() already checks holes, fix this issue by extending this function to return 'valid_start' and 'valid_end' for a given range. show_valid_zones() then proceeds with the valid range. [1] 'Commit bdee237c0343 ("x86: mm: Use 2GB memory block size on large-memory x86-64 systems")' Link: http://lkml.kernel.org/r/20170127222149.30893-3-toshi.kani@hpe.com Signed-off-by: Toshi Kani Cc: Greg Kroah-Hartman Cc: Zhang Zhen Cc: Reza Arbab Cc: David Rientjes Cc: Dan Williams Cc: [4.4+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/base/memory.c | 12 ++++++------ include/linux/memory_hotplug.h | 3 ++- mm/memory_hotplug.c | 20 +++++++++++++++----- 3 files changed, 23 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/base/memory.c b/drivers/base/memory.c index dacb6a8418aa..fa26ffd25fa6 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -389,33 +389,33 @@ static ssize_t show_valid_zones(struct device *dev, { struct memory_block *mem = to_memory_block(dev); unsigned long start_pfn, end_pfn; + unsigned long valid_start, valid_end, valid_pages; unsigned long nr_pages = PAGES_PER_SECTION * sections_per_block; - struct page *first_page; struct zone *zone; int zone_shift = 0; start_pfn = section_nr_to_pfn(mem->start_section_nr); end_pfn = start_pfn + nr_pages; - first_page = pfn_to_page(start_pfn); /* The block contains more than one zone can not be offlined. */ - if (!test_pages_in_a_zone(start_pfn, end_pfn)) + if (!test_pages_in_a_zone(start_pfn, end_pfn, &valid_start, &valid_end)) return sprintf(buf, "none\n"); - zone = page_zone(first_page); + zone = page_zone(pfn_to_page(valid_start)); + valid_pages = valid_end - valid_start; /* MMOP_ONLINE_KEEP */ sprintf(buf, "%s", zone->name); /* MMOP_ONLINE_KERNEL */ - zone_can_shift(start_pfn, nr_pages, ZONE_NORMAL, &zone_shift); + zone_can_shift(valid_start, valid_pages, ZONE_NORMAL, &zone_shift); if (zone_shift) { strcat(buf, " "); strcat(buf, (zone + zone_shift)->name); } /* MMOP_ONLINE_MOVABLE */ - zone_can_shift(start_pfn, nr_pages, ZONE_MOVABLE, &zone_shift); + zone_can_shift(valid_start, valid_pages, ZONE_MOVABLE, &zone_shift); if (zone_shift) { strcat(buf, " "); strcat(buf, (zone + zone_shift)->name); diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h index c1784c0b4f35..134a2f69c21a 100644 --- a/include/linux/memory_hotplug.h +++ b/include/linux/memory_hotplug.h @@ -85,7 +85,8 @@ extern int zone_grow_waitqueues(struct zone *zone, unsigned long nr_pages); extern int add_one_highpage(struct page *page, int pfn, int bad_ppro); /* VM interface that may be used by firmware interface */ extern int online_pages(unsigned long, unsigned long, int); -extern int test_pages_in_a_zone(unsigned long, unsigned long); +extern int test_pages_in_a_zone(unsigned long start_pfn, unsigned long end_pfn, + unsigned long *valid_start, unsigned long *valid_end); extern void __offline_isolated_pages(unsigned long, unsigned long); typedef void (*online_page_callback_t)(struct page *page); diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index 1218f73890b6..b8c11e063ff0 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -1484,10 +1484,13 @@ bool is_mem_section_removable(unsigned long start_pfn, unsigned long nr_pages) /* * Confirm all pages in a range [start, end) belong to the same zone. + * When true, return its valid [start, end). */ -int test_pages_in_a_zone(unsigned long start_pfn, unsigned long end_pfn) +int test_pages_in_a_zone(unsigned long start_pfn, unsigned long end_pfn, + unsigned long *valid_start, unsigned long *valid_end) { unsigned long pfn, sec_end_pfn; + unsigned long start, end; struct zone *zone = NULL; struct page *page; int i; @@ -1509,14 +1512,20 @@ int test_pages_in_a_zone(unsigned long start_pfn, unsigned long end_pfn) page = pfn_to_page(pfn + i); if (zone && page_zone(page) != zone) return 0; + if (!zone) + start = pfn + i; zone = page_zone(page); + end = pfn + MAX_ORDER_NR_PAGES; } } - if (zone) + if (zone) { + *valid_start = start; + *valid_end = end; return 1; - else + } else { return 0; + } } /* @@ -1843,6 +1852,7 @@ static int __ref __offline_pages(unsigned long start_pfn, long offlined_pages; int ret, drain, retry_max, node; unsigned long flags; + unsigned long valid_start, valid_end; struct zone *zone; struct memory_notify arg; @@ -1853,10 +1863,10 @@ static int __ref __offline_pages(unsigned long start_pfn, return -EINVAL; /* This makes hotplug much easier...and readable. we assume this for now. .*/ - if (!test_pages_in_a_zone(start_pfn, end_pfn)) + if (!test_pages_in_a_zone(start_pfn, end_pfn, &valid_start, &valid_end)) return -EINVAL; - zone = page_zone(pfn_to_page(start_pfn)); + zone = page_zone(pfn_to_page(valid_start)); node = zone_to_nid(zone); nr_pages = end_pfn - start_pfn; -- cgit v1.2.3 From 6e978b22efa1db9f6e71b24440b5f1d93e968ee3 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Fri, 3 Feb 2017 14:18:39 -0800 Subject: cpufreq: intel_pstate: Disable energy efficiency optimization Some Kabylake desktop processors may not reach max turbo when running in HWP mode, even if running under sustained 100% utilization. This occurs when the HWP.EPP (Energy Performance Preference) is set to "balance_power" (0x80) -- the default on most systems. It occurs because the platform BIOS may erroneously enable an energy-efficiency setting -- MSR_IA32_POWER_CTL BIT-EE, which is not recommended to be enabled on this SKU. On the failing systems, this BIOS issue was not discovered when the desktop motherboard was tested with Windows, because the BIOS also neglects to provide the ACPI/CPPC table, that Windows requires to enable HWP, and so Windows runs in legacy P-state mode, where this setting has no effect. Linux' intel_pstate driver does not require ACPI/CPPC to enable HWP, and so it runs in HWP mode, exposing this incorrect BIOS configuration. There are several ways to address this problem. First, Linux can also run in legacy P-state mode on this system. As intel_pstate is how Linux enables HWP, booting with "intel_pstate=disable" will run in acpi-cpufreq/ondemand legacy p-state mode. Or second, the "performance" governor can be used with intel_pstate, which will modify HWP.EPP to 0. Or third, starting in 4.10, the /sys/devices/system/cpu/cpufreq/policy*/energy_performance_preference attribute in can be updated from "balance_power" to "performance". Or fourth, apply this patch, which fixes the erroneous setting of MSR_IA32_POWER_CTL BIT_EE on this model, allowing the default configuration to function as designed. Signed-off-by: Srinivas Pandruvada Reviewed-by: Len Brown Cc: 4.6+ # 4.6+ Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'drivers') diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index f91c25718d16..86e36544925f 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -1235,6 +1235,25 @@ static void intel_pstate_hwp_enable(struct cpudata *cpudata) cpudata->epp_default = intel_pstate_get_epp(cpudata, 0); } +#define MSR_IA32_POWER_CTL_BIT_EE 19 + +/* Disable energy efficiency optimization */ +static void intel_pstate_disable_ee(int cpu) +{ + u64 power_ctl; + int ret; + + ret = rdmsrl_on_cpu(cpu, MSR_IA32_POWER_CTL, &power_ctl); + if (ret) + return; + + if (!(power_ctl & BIT(MSR_IA32_POWER_CTL_BIT_EE))) { + pr_info("Disabling energy efficiency optimization\n"); + power_ctl |= BIT(MSR_IA32_POWER_CTL_BIT_EE); + wrmsrl_on_cpu(cpu, MSR_IA32_POWER_CTL, power_ctl); + } +} + static int atom_get_min_pstate(void) { u64 value; @@ -1845,6 +1864,11 @@ static const struct x86_cpu_id intel_pstate_cpu_oob_ids[] __initconst = { {} }; +static const struct x86_cpu_id intel_pstate_cpu_ee_disable_ids[] = { + ICPU(INTEL_FAM6_KABYLAKE_DESKTOP, core_params), + {} +}; + static int intel_pstate_init_cpu(unsigned int cpunum) { struct cpudata *cpu; @@ -1875,6 +1899,12 @@ static int intel_pstate_init_cpu(unsigned int cpunum) cpu->cpu = cpunum; if (hwp_active) { + const struct x86_cpu_id *id; + + id = x86_match_cpu(intel_pstate_cpu_ee_disable_ids); + if (id) + intel_pstate_disable_ee(cpunum); + intel_pstate_hwp_enable(cpu); pid_params.sample_rate_ms = 50; pid_params.sample_rate_ns = 50 * NSEC_PER_MSEC; -- cgit v1.2.3 From a9306a63631493afc75893a4ac405d4e1cbae6aa Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 4 Feb 2017 00:44:36 +0100 Subject: PM / runtime: Avoid false-positive warnings from might_sleep_if() The might_sleep_if() assertions in __pm_runtime_idle(), __pm_runtime_suspend() and __pm_runtime_resume() may generate false-positive warnings in some situations. For example, that happens if a nested pm_runtime_get_sync()/pm_runtime_put() pair is executed with disabled interrupts within an outer pm_runtime_get_sync()/pm_runtime_put() section for the same device. [Generally, pm_runtime_get_sync() may sleep, so it should not be called with disabled interrupts, but in this particular case the previous pm_runtime_get_sync() guarantees that the device will not be suspended, so the inner pm_runtime_get_sync() will return immediately after incrementing the device's usage counter.] That started to happen in the i915 driver in 4.10-rc, leading to the following splat: BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1032 in_atomic(): 1, irqs_disabled(): 0, pid: 1500, name: Xorg 1 lock held by Xorg/1500: #0: (&dev->struct_mutex){+.+.+.}, at: [] i915_mutex_lock_interruptible+0x43/0x140 [i915] CPU: 0 PID: 1500 Comm: Xorg Not tainted Call Trace: dump_stack+0x85/0xc2 ___might_sleep+0x196/0x260 __might_sleep+0x53/0xb0 __pm_runtime_resume+0x7a/0x90 intel_runtime_pm_get+0x25/0x90 [i915] aliasing_gtt_bind_vma+0xaa/0xf0 [i915] i915_vma_bind+0xaf/0x1e0 [i915] i915_gem_execbuffer_relocate_entry+0x513/0x6f0 [i915] i915_gem_execbuffer_relocate_vma.isra.34+0x188/0x250 [i915] ? trace_hardirqs_on+0xd/0x10 ? i915_gem_execbuffer_reserve_vma.isra.31+0x152/0x1f0 [i915] ? i915_gem_execbuffer_reserve.isra.32+0x372/0x3a0 [i915] i915_gem_do_execbuffer.isra.38+0xa70/0x1a40 [i915] ? __might_fault+0x4e/0xb0 i915_gem_execbuffer2+0xc5/0x260 [i915] ? __might_fault+0x4e/0xb0 drm_ioctl+0x206/0x450 [drm] ? i915_gem_execbuffer+0x340/0x340 [i915] ? __fget+0x5/0x200 do_vfs_ioctl+0x91/0x6f0 ? __fget+0x111/0x200 ? __fget+0x5/0x200 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x23/0xc6 even though the code triggering it is correct. Unfortunately, the might_sleep_if() assertions in question are too coarse-grained to cover such cases correctly, so make them a bit less sensitive in order to avoid the false-positives. Reported-and-tested-by: Sedat Dilek Signed-off-by: Rafael J. Wysocki --- drivers/base/power/runtime.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 872eac4cb1df..a14fac6a01d3 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -966,13 +966,13 @@ int __pm_runtime_idle(struct device *dev, int rpmflags) unsigned long flags; int retval; - might_sleep_if(!(rpmflags & RPM_ASYNC) && !dev->power.irq_safe); - if (rpmflags & RPM_GET_PUT) { if (!atomic_dec_and_test(&dev->power.usage_count)) return 0; } + might_sleep_if(!(rpmflags & RPM_ASYNC) && !dev->power.irq_safe); + spin_lock_irqsave(&dev->power.lock, flags); retval = rpm_idle(dev, rpmflags); spin_unlock_irqrestore(&dev->power.lock, flags); @@ -998,13 +998,13 @@ int __pm_runtime_suspend(struct device *dev, int rpmflags) unsigned long flags; int retval; - might_sleep_if(!(rpmflags & RPM_ASYNC) && !dev->power.irq_safe); - if (rpmflags & RPM_GET_PUT) { if (!atomic_dec_and_test(&dev->power.usage_count)) return 0; } + might_sleep_if(!(rpmflags & RPM_ASYNC) && !dev->power.irq_safe); + spin_lock_irqsave(&dev->power.lock, flags); retval = rpm_suspend(dev, rpmflags); spin_unlock_irqrestore(&dev->power.lock, flags); @@ -1029,7 +1029,8 @@ int __pm_runtime_resume(struct device *dev, int rpmflags) unsigned long flags; int retval; - might_sleep_if(!(rpmflags & RPM_ASYNC) && !dev->power.irq_safe); + might_sleep_if(!(rpmflags & RPM_ASYNC) && !dev->power.irq_safe && + dev->power.runtime_status != RPM_ACTIVE); if (rpmflags & RPM_GET_PUT) atomic_inc(&dev->power.usage_count); -- cgit v1.2.3 From bfb34527a32a1a576d9bfb7026d3ab0369a6cd60 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sat, 4 Feb 2017 14:47:31 -0800 Subject: libnvdimm, pfn: fix memmap reservation size versus 4K alignment When vmemmap_populate() allocates space for the memmap it does so in 2MB sized chunks. The libnvdimm-pfn driver incorrectly accounts for this when the alignment of the device is set to 4K. When this happens we trigger memory allocation failures in altmap_alloc_block_buf() and trigger warnings of the form: WARNING: CPU: 0 PID: 3376 at arch/x86/mm/init_64.c:656 arch_add_memory+0xe4/0xf0 [..] Call Trace: dump_stack+0x86/0xc3 __warn+0xcb/0xf0 warn_slowpath_null+0x1d/0x20 arch_add_memory+0xe4/0xf0 devm_memremap_pages+0x29b/0x4e0 Fixes: 315c562536c4 ("libnvdimm, pfn: add 'align' attribute, default to HPAGE_SIZE") Cc: Signed-off-by: Dan Williams --- drivers/nvdimm/pfn_devs.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/nvdimm/pfn_devs.c b/drivers/nvdimm/pfn_devs.c index a2ac9e641aa9..6c033c9a2f06 100644 --- a/drivers/nvdimm/pfn_devs.c +++ b/drivers/nvdimm/pfn_devs.c @@ -627,15 +627,12 @@ static int nd_pfn_init(struct nd_pfn *nd_pfn) size = resource_size(&nsio->res); npfns = (size - start_pad - end_trunc - SZ_8K) / SZ_4K; if (nd_pfn->mode == PFN_MODE_PMEM) { - unsigned long memmap_size; - /* * vmemmap_populate_hugepages() allocates the memmap array in * HPAGE_SIZE chunks. */ - memmap_size = ALIGN(64 * npfns, HPAGE_SIZE); - offset = ALIGN(start + SZ_8K + memmap_size + dax_label_reserve, - nd_pfn->align) - start; + offset = ALIGN(start + SZ_8K + 64 * npfns + dax_label_reserve, + max(nd_pfn->align, HPAGE_SIZE)) - start; } else if (nd_pfn->mode == PFN_MODE_RAM) offset = ALIGN(start + SZ_8K + dax_label_reserve, nd_pfn->align) - start; -- cgit v1.2.3 From b3f2d07f4649adcf6905953a10d217b5683e4077 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 3 Feb 2017 17:35:46 +0100 Subject: hns: avoid stack overflow with CONFIG_KASAN The use of ACCESS_ONCE() looks like a micro-optimization to force gcc to use an indexed load for the register address, but it has an absolutely detrimental effect on builds with gcc-5 and CONFIG_KASAN=y, leading to a very likely kernel stack overflow aside from very complex object code: hisilicon/hns/hns_dsaf_gmac.c: In function 'hns_gmac_update_stats': hisilicon/hns/hns_dsaf_gmac.c:419:1: error: the frame size of 2912 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] hisilicon/hns/hns_dsaf_ppe.c: In function 'hns_ppe_reset_common': hisilicon/hns/hns_dsaf_ppe.c:390:1: error: the frame size of 1184 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] hisilicon/hns/hns_dsaf_ppe.c: In function 'hns_ppe_get_regs': hisilicon/hns/hns_dsaf_ppe.c:621:1: error: the frame size of 3632 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] hisilicon/hns/hns_dsaf_rcb.c: In function 'hns_rcb_get_common_regs': hisilicon/hns/hns_dsaf_rcb.c:970:1: error: the frame size of 2784 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] hisilicon/hns/hns_dsaf_gmac.c: In function 'hns_gmac_get_regs': hisilicon/hns/hns_dsaf_gmac.c:641:1: error: the frame size of 5728 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] hisilicon/hns/hns_dsaf_rcb.c: In function 'hns_rcb_get_ring_regs': hisilicon/hns/hns_dsaf_rcb.c:1021:1: error: the frame size of 2208 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_comm_init': hisilicon/hns/hns_dsaf_main.c:1209:1: error: the frame size of 1904 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] hisilicon/hns/hns_dsaf_xgmac.c: In function 'hns_xgmac_get_regs': hisilicon/hns/hns_dsaf_xgmac.c:748:1: error: the frame size of 4704 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_update_stats': hisilicon/hns/hns_dsaf_main.c:2420:1: error: the frame size of 1088 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_get_regs': hisilicon/hns/hns_dsaf_main.c:2753:1: error: the frame size of 10768 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] This does not seem to happen any more with gcc-7, but removing the ACCESS_ONCE seems safe anyway and it avoids a serious issue for some people. I have verified that with gcc-5.3.1, the object code we get is better in the new version both with and without CONFIG_KASAN, as we no longer allocate a 1344 byte stack frame for hns_dsaf_get_regs() but otherwise have practically identical object code. With gcc-7.0.0, removing ACCESS_ONCE has no effect, the object code is already good either way. This patch is probably not urgent to get into 4.11 as only KASAN=y builds with certain compilers are affected, but I still think it makes sense to backport into older kernels. Cc: stable@vger.kernel.org Fixes: 511e6bc ("net: add Hisilicon Network Subsystem DSAF support") Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h index 87226685f742..8fa18fc17cd2 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h @@ -1014,9 +1014,7 @@ static inline void dsaf_write_reg(void __iomem *base, u32 reg, u32 value) { - u8 __iomem *reg_addr = ACCESS_ONCE(base); - - writel(value, reg_addr + reg); + writel(value, base + reg); } #define dsaf_write_dev(a, reg, value) \ @@ -1024,9 +1022,7 @@ static inline void dsaf_write_reg(void __iomem *base, u32 reg, u32 value) static inline u32 dsaf_read_reg(u8 __iomem *base, u32 reg) { - u8 __iomem *reg_addr = ACCESS_ONCE(base); - - return readl(reg_addr + reg); + return readl(base + reg); } static inline void dsaf_write_syscon(struct regmap *base, u32 reg, u32 value) -- cgit v1.2.3 From e1edab87faf6ca30cd137e0795bc73aa9a9a22ec Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Fri, 3 Feb 2017 18:20:48 -0500 Subject: tun: read vnet_hdr_sz once When IFF_VNET_HDR is enabled, a virtio_net header must precede data. Data length is verified to be greater than or equal to expected header length tun->vnet_hdr_sz before copying. Read this value once and cache locally, as it can be updated between the test and use (TOCTOU). Signed-off-by: Willem de Bruijn Reported-by: Dmitry Vyukov CC: Eric Dumazet Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/tun.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 2cd10b26b650..bfabe180053e 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1170,9 +1170,11 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile, } if (tun->flags & IFF_VNET_HDR) { - if (len < tun->vnet_hdr_sz) + int vnet_hdr_sz = READ_ONCE(tun->vnet_hdr_sz); + + if (len < vnet_hdr_sz) return -EINVAL; - len -= tun->vnet_hdr_sz; + len -= vnet_hdr_sz; if (!copy_from_iter_full(&gso, sizeof(gso), from)) return -EFAULT; @@ -1183,7 +1185,7 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile, if (tun16_to_cpu(tun, gso.hdr_len) > len) return -EINVAL; - iov_iter_advance(from, tun->vnet_hdr_sz - sizeof(gso)); + iov_iter_advance(from, vnet_hdr_sz - sizeof(gso)); } if ((tun->flags & TUN_TYPE_MASK) == IFF_TAP) { @@ -1335,7 +1337,7 @@ static ssize_t tun_put_user(struct tun_struct *tun, vlan_hlen = VLAN_HLEN; if (tun->flags & IFF_VNET_HDR) - vnet_hdr_sz = tun->vnet_hdr_sz; + vnet_hdr_sz = READ_ONCE(tun->vnet_hdr_sz); total = skb->len + vlan_hlen + vnet_hdr_sz; -- cgit v1.2.3 From 837585a5375c38d40361cfe64e6fd11e1addb936 Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Fri, 3 Feb 2017 18:20:49 -0500 Subject: macvtap: read vnet_hdr_size once When IFF_VNET_HDR is enabled, a virtio_net header must precede data. Data length is verified to be greater than or equal to expected header length tun->vnet_hdr_sz before copying. Macvtap functions read the value once, but unless READ_ONCE is used, the compiler may ignore this and read multiple times. Enforce a single read and locally cached value to avoid updates between test and use. Signed-off-by: Willem de Bruijn Suggested-by: Eric Dumazet Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/macvtap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c index 402618565838..c27011bbe30c 100644 --- a/drivers/net/macvtap.c +++ b/drivers/net/macvtap.c @@ -681,7 +681,7 @@ static ssize_t macvtap_get_user(struct macvtap_queue *q, struct msghdr *m, size_t linear; if (q->flags & IFF_VNET_HDR) { - vnet_hdr_len = q->vnet_hdr_sz; + vnet_hdr_len = READ_ONCE(q->vnet_hdr_sz); err = -EINVAL; if (len < vnet_hdr_len) @@ -820,7 +820,7 @@ static ssize_t macvtap_put_user(struct macvtap_queue *q, if (q->flags & IFF_VNET_HDR) { struct virtio_net_hdr vnet_hdr; - vnet_hdr_len = q->vnet_hdr_sz; + vnet_hdr_len = READ_ONCE(q->vnet_hdr_sz); if (iov_iter_count(iter) < vnet_hdr_len) return -EINVAL; -- cgit v1.2.3 From 5593523f968bc86d42a035c6df47d5e0979b5ace Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 4 Feb 2017 16:56:03 +0000 Subject: pegasus: Use heap buffers for all register access MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Allocating USB buffers on the stack is not portable, and no longer works on x86_64 (with VMAP_STACK enabled as per default). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") References: https://bugs.debian.org/852556 Reported-by: Lisandro Damián Nicanor Pérez Meyer Tested-by: Lisandro Damián Nicanor Pérez Meyer Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/usb/pegasus.c | 29 +++++++++++++++++++++++++---- 1 file changed, 25 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index 24e803fe9a53..36674484c6fb 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -126,40 +126,61 @@ static void async_ctrl_callback(struct urb *urb) static int get_registers(pegasus_t *pegasus, __u16 indx, __u16 size, void *data) { + u8 *buf; int ret; + buf = kmalloc(size, GFP_NOIO); + if (!buf) + return -ENOMEM; + ret = usb_control_msg(pegasus->usb, usb_rcvctrlpipe(pegasus->usb, 0), PEGASUS_REQ_GET_REGS, PEGASUS_REQT_READ, 0, - indx, data, size, 1000); + indx, buf, size, 1000); if (ret < 0) netif_dbg(pegasus, drv, pegasus->net, "%s returned %d\n", __func__, ret); + else if (ret <= size) + memcpy(data, buf, ret); + kfree(buf); return ret; } -static int set_registers(pegasus_t *pegasus, __u16 indx, __u16 size, void *data) +static int set_registers(pegasus_t *pegasus, __u16 indx, __u16 size, + const void *data) { + u8 *buf; int ret; + buf = kmemdup(data, size, GFP_NOIO); + if (!buf) + return -ENOMEM; + ret = usb_control_msg(pegasus->usb, usb_sndctrlpipe(pegasus->usb, 0), PEGASUS_REQ_SET_REGS, PEGASUS_REQT_WRITE, 0, - indx, data, size, 100); + indx, buf, size, 100); if (ret < 0) netif_dbg(pegasus, drv, pegasus->net, "%s returned %d\n", __func__, ret); + kfree(buf); return ret; } static int set_register(pegasus_t *pegasus, __u16 indx, __u8 data) { + u8 *buf; int ret; + buf = kmemdup(&data, 1, GFP_NOIO); + if (!buf) + return -ENOMEM; + ret = usb_control_msg(pegasus->usb, usb_sndctrlpipe(pegasus->usb, 0), PEGASUS_REQ_SET_REG, PEGASUS_REQT_WRITE, data, - indx, &data, 1, 1000); + indx, buf, 1, 1000); if (ret < 0) netif_dbg(pegasus, drv, pegasus->net, "%s returned %d\n", __func__, ret); + kfree(buf); return ret; } -- cgit v1.2.3 From 7926aff5c57b577ab0f43364ff0c59d968f6a414 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 4 Feb 2017 16:56:32 +0000 Subject: rtl8150: Use heap buffers for all register access Allocating USB buffers on the stack is not portable, and no longer works on x86_64 (with VMAP_STACK enabled as per default). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/usb/rtl8150.c | 34 +++++++++++++++++++++++++++------- 1 file changed, 27 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c index 95b7bd0d7abc..c81c79110cef 100644 --- a/drivers/net/usb/rtl8150.c +++ b/drivers/net/usb/rtl8150.c @@ -155,16 +155,36 @@ static const char driver_name [] = "rtl8150"; */ static int get_registers(rtl8150_t * dev, u16 indx, u16 size, void *data) { - return usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), - RTL8150_REQ_GET_REGS, RTL8150_REQT_READ, - indx, 0, data, size, 500); + void *buf; + int ret; + + buf = kmalloc(size, GFP_NOIO); + if (!buf) + return -ENOMEM; + + ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), + RTL8150_REQ_GET_REGS, RTL8150_REQT_READ, + indx, 0, buf, size, 500); + if (ret > 0 && ret <= size) + memcpy(data, buf, ret); + kfree(buf); + return ret; } -static int set_registers(rtl8150_t * dev, u16 indx, u16 size, void *data) +static int set_registers(rtl8150_t * dev, u16 indx, u16 size, const void *data) { - return usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), - RTL8150_REQ_SET_REGS, RTL8150_REQT_WRITE, - indx, 0, data, size, 500); + void *buf; + int ret; + + buf = kmemdup(data, size, GFP_NOIO); + if (!buf) + return -ENOMEM; + + ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), + RTL8150_REQ_SET_REGS, RTL8150_REQT_WRITE, + indx, 0, buf, size, 500); + kfree(buf); + return ret; } static void async_set_reg_cb(struct urb *urb) -- cgit v1.2.3 From d41149145f98fe26dcd0bfd1d6cc095e6e041418 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 4 Feb 2017 16:56:56 +0000 Subject: catc: Combine failure cleanup code in catc_probe() Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/usb/catc.c | 33 +++++++++++++++++---------------- 1 file changed, 17 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c index 3daa41bdd4ea..985909eab72c 100644 --- a/drivers/net/usb/catc.c +++ b/drivers/net/usb/catc.c @@ -776,7 +776,7 @@ static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id struct net_device *netdev; struct catc *catc; u8 broadcast[ETH_ALEN]; - int i, pktsz; + int i, pktsz, ret; if (usb_set_interface(usbdev, intf->altsetting->desc.bInterfaceNumber, 1)) { @@ -811,12 +811,8 @@ static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id if ((!catc->ctrl_urb) || (!catc->tx_urb) || (!catc->rx_urb) || (!catc->irq_urb)) { dev_err(&intf->dev, "No free urbs available.\n"); - usb_free_urb(catc->ctrl_urb); - usb_free_urb(catc->tx_urb); - usb_free_urb(catc->rx_urb); - usb_free_urb(catc->irq_urb); - free_netdev(netdev); - return -ENOMEM; + ret = -ENOMEM; + goto fail_free; } /* The F5U011 has the same vendor/product as the netmate but a device version of 0x130 */ @@ -913,16 +909,21 @@ static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id usb_set_intfdata(intf, catc); SET_NETDEV_DEV(netdev, &intf->dev); - if (register_netdev(netdev) != 0) { - usb_set_intfdata(intf, NULL); - usb_free_urb(catc->ctrl_urb); - usb_free_urb(catc->tx_urb); - usb_free_urb(catc->rx_urb); - usb_free_urb(catc->irq_urb); - free_netdev(netdev); - return -EIO; - } + ret = register_netdev(netdev); + if (ret) + goto fail_clear_intfdata; + return 0; + +fail_clear_intfdata: + usb_set_intfdata(intf, NULL); +fail_free: + usb_free_urb(catc->ctrl_urb); + usb_free_urb(catc->tx_urb); + usb_free_urb(catc->rx_urb); + usb_free_urb(catc->irq_urb); + free_netdev(netdev); + return ret; } static void catc_disconnect(struct usb_interface *intf) -- cgit v1.2.3 From 2d6a0e9de03ee658a9adc3bfb2f0ca55dff1e478 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 4 Feb 2017 16:57:04 +0000 Subject: catc: Use heap buffer for memory size test Allocating USB buffers on the stack is not portable, and no longer works on x86_64 (with VMAP_STACK enabled as per default). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/usb/catc.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c index 985909eab72c..0acc9b640419 100644 --- a/drivers/net/usb/catc.c +++ b/drivers/net/usb/catc.c @@ -776,7 +776,7 @@ static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id struct net_device *netdev; struct catc *catc; u8 broadcast[ETH_ALEN]; - int i, pktsz, ret; + int pktsz, ret; if (usb_set_interface(usbdev, intf->altsetting->desc.bInterfaceNumber, 1)) { @@ -840,15 +840,24 @@ static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id catc->irq_buf, 2, catc_irq_done, catc, 1); if (!catc->is_f5u011) { + u32 *buf; + int i; + dev_dbg(dev, "Checking memory size\n"); - i = 0x12345678; - catc_write_mem(catc, 0x7a80, &i, 4); - i = 0x87654321; - catc_write_mem(catc, 0xfa80, &i, 4); - catc_read_mem(catc, 0x7a80, &i, 4); + buf = kmalloc(4, GFP_KERNEL); + if (!buf) { + ret = -ENOMEM; + goto fail_free; + } + + *buf = 0x12345678; + catc_write_mem(catc, 0x7a80, buf, 4); + *buf = 0x87654321; + catc_write_mem(catc, 0xfa80, buf, 4); + catc_read_mem(catc, 0x7a80, buf, 4); - switch (i) { + switch (*buf) { case 0x12345678: catc_set_reg(catc, TxBufCount, 8); catc_set_reg(catc, RxBufCount, 32); @@ -863,6 +872,8 @@ static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id dev_dbg(dev, "32k Memory\n"); break; } + + kfree(buf); dev_dbg(dev, "Getting MAC from SEEROM.\n"); -- cgit v1.2.3 From bd4ce941c8d5b862b2f83364be5dbe8fc8ab48f8 Mon Sep 17 00:00:00 2001 From: Benjamin Poirier Date: Mon, 6 Feb 2017 10:14:31 -0800 Subject: mlx4: Invoke softirqs after napi_reschedule mlx4 may schedule napi from a workqueue. Afterwards, softirqs are not run in a deterministic time frame and the following message may be logged: NOHZ: local_softirq_pending 08 The problem is the same as what was described in commit ec13ee80145c ("virtio_net: invoke softirqs after __napi_schedule") and this patch applies the same fix to mlx4. Fixes: 07841f9d94c1 ("net/mlx4_en: Schedule napi when RX buffers allocation fails") Cc: Eric Dumazet Signed-off-by: Benjamin Poirier Acked-by: Eric Dumazet Reviewed-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_rx.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index eac527e25ec9..cc003fdf0ed9 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -514,8 +514,11 @@ void mlx4_en_recover_from_oom(struct mlx4_en_priv *priv) return; for (ring = 0; ring < priv->rx_ring_num; ring++) { - if (mlx4_en_is_ring_empty(priv->rx_ring[ring])) + if (mlx4_en_is_ring_empty(priv->rx_ring[ring])) { + local_bh_disable(); napi_reschedule(&priv->rx_cq[ring]->napi); + local_bh_enable(); + } } } -- cgit v1.2.3