From 0ac18dac43103ab1df6d26ec9a781c0126f83ced Mon Sep 17 00:00:00 2001 From: Crescent Hsieh Date: Mon, 17 Jun 2024 14:30:58 +0800 Subject: tty: serial: 8250: Fix port count mismatch with the device Normally, the number of ports is indicated by the third digit of the device ID on Moxa PCI serial boards. For example, `0x1121` indicates a device with 2 ports. However, `CP116E_A_A` and `CP116E_A_B` are exceptions; they have 8 ports, but the third digit of the device ID is `6`. This patch introduces a function to retrieve the number of ports on Moxa PCI serial boards, addressing the issue described above. Fixes: 37058fd5d239 ("tty: serial: 8250: Add support for MOXA Mini PCIe boards") Cc: stable Signed-off-by: Crescent Hsieh Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240617063058.18866-1-crescentcy.hsieh@moxa.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pci.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 40af74b55933..e1d7aa2fa347 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1985,6 +1985,17 @@ enum { MOXA_SUPP_RS485 = BIT(2), }; +static unsigned short moxa_get_nports(unsigned short device) +{ + switch (device) { + case PCI_DEVICE_ID_MOXA_CP116E_A_A: + case PCI_DEVICE_ID_MOXA_CP116E_A_B: + return 8; + } + + return FIELD_GET(0x00F0, device); +} + static bool pci_moxa_is_mini_pcie(unsigned short device) { if (device == PCI_DEVICE_ID_MOXA_CP102N || @@ -2038,7 +2049,7 @@ static int pci_moxa_init(struct pci_dev *dev) { unsigned short device = dev->device; resource_size_t iobar_addr = pci_resource_start(dev, 2); - unsigned int num_ports = (device & 0x00F0) >> 4, i; + unsigned int i, num_ports = moxa_get_nports(device); u8 val, init_mode = MOXA_RS232; if (!(pci_moxa_supported_rs(dev) & MOXA_SUPP_RS232)) { -- cgit v1.2.3 From 9d141c1e615795eeb93cd35501ad144ee997a826 Mon Sep 17 00:00:00 2001 From: Udit Kumar Date: Wed, 19 Jun 2024 16:29:03 +0530 Subject: serial: 8250_omap: Implementation of Errata i2310 As per Errata i2310[0], Erroneous timeout can be triggered, if this Erroneous interrupt is not cleared then it may leads to storm of interrupts, therefore apply Errata i2310 solution. [0] https://www.ti.com/lit/pdf/sprz536 page 23 Fixes: b67e830d38fa ("serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs") Cc: stable@vger.kernel.org Signed-off-by: Udit Kumar Link: https://lore.kernel.org/r/20240619105903.165434-1-u-kumar1@ti.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_omap.c | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 170639d12b2a..ddac0a13cf84 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -115,6 +115,10 @@ /* RX FIFO occupancy indicator */ #define UART_OMAP_RX_LVL 0x19 +/* Timeout low and High */ +#define UART_OMAP_TO_L 0x26 +#define UART_OMAP_TO_H 0x27 + /* * Copy of the genpd flags for the console. * Only used if console suspend is disabled @@ -663,13 +667,24 @@ static irqreturn_t omap8250_irq(int irq, void *dev_id) /* * On K3 SoCs, it is observed that RX TIMEOUT is signalled after - * FIFO has been drained, in which case a dummy read of RX FIFO - * is required to clear RX TIMEOUT condition. + * FIFO has been drained or erroneously. + * So apply solution of Errata i2310 as mentioned in + * https://www.ti.com/lit/pdf/sprz536 */ if (priv->habit & UART_RX_TIMEOUT_QUIRK && - (iir & UART_IIR_RX_TIMEOUT) == UART_IIR_RX_TIMEOUT && - serial_port_in(port, UART_OMAP_RX_LVL) == 0) { - serial_port_in(port, UART_RX); + (iir & UART_IIR_RX_TIMEOUT) == UART_IIR_RX_TIMEOUT) { + unsigned char efr2, timeout_h, timeout_l; + + efr2 = serial_in(up, UART_OMAP_EFR2); + timeout_h = serial_in(up, UART_OMAP_TO_H); + timeout_l = serial_in(up, UART_OMAP_TO_L); + serial_out(up, UART_OMAP_TO_H, 0xFF); + serial_out(up, UART_OMAP_TO_L, 0xFF); + serial_out(up, UART_OMAP_EFR2, UART_OMAP_EFR2_TIMEOUT_BEHAVE); + serial_in(up, UART_IIR); + serial_out(up, UART_OMAP_EFR2, efr2); + serial_out(up, UART_OMAP_TO_H, timeout_h); + serial_out(up, UART_OMAP_TO_L, timeout_l); } /* Stop processing interrupts on input overrun */ -- cgit v1.2.3 From 7c92a8bd53f24d50c8cf4aba53bb75505b382fed Mon Sep 17 00:00:00 2001 From: Jean-Michel Hautbois Date: Thu, 20 Jun 2024 18:29:59 +0200 Subject: tty: mcf: MCF54418 has 10 UARTS Most of the colfires have up to 5 UARTs but MCF54418 has up-to 10 ! Change the maximum value authorized. Signed-off-by: Jean-Michel Hautbois Cc: stable Fixes: 2545cf6e94b4 ("m68knommu: allow 4 coldfire serial ports") Link: https://lore.kernel.org/r/20240620-upstream-uart-v1-1-a9d0d95fb19e@yoseli.org Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mcf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c index b0604d6da025..58858dd352c5 100644 --- a/drivers/tty/serial/mcf.c +++ b/drivers/tty/serial/mcf.c @@ -462,7 +462,7 @@ static const struct uart_ops mcf_uart_ops = { .verify_port = mcf_verify_port, }; -static struct mcf_uart mcf_ports[4]; +static struct mcf_uart mcf_ports[10]; #define MCF_MAXPORTS ARRAY_SIZE(mcf_ports) -- cgit v1.2.3 From a81dbd0463eca317eee44985a66aa6cc2ce5c101 Mon Sep 17 00:00:00 2001 From: Stefan Eichenberger Date: Fri, 21 Jun 2024 17:37:49 +0200 Subject: serial: imx: set receiver level before starting uart Set the receiver level to something > 0 before calling imx_uart_start_rx in rs485_config. This is necessary to avoid an interrupt storm that might prevent the system from booting. This was seen on an i.MX7 device when the rs485-rts-active-low property was active in the device tree. Fixes: 6d215f83e5fc ("serial: imx: warn user when using unsupported configuration") Cc: stable Signed-off-by: Stefan Eichenberger Link: https://lore.kernel.org/r/20240621153829.183780-1-eichest@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/imx.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 2eb22594960f..f4f40c9373c2 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1952,8 +1952,10 @@ static int imx_uart_rs485_config(struct uart_port *port, struct ktermios *termio /* Make sure Rx is enabled in case Tx is active with Rx disabled */ if (!(rs485conf->flags & SER_RS485_ENABLED) || - rs485conf->flags & SER_RS485_RX_DURING_TX) + rs485conf->flags & SER_RS485_RX_DURING_TX) { + imx_uart_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT); imx_uart_start_rx(port); + } return 0; } -- cgit v1.2.3 From ea55c65dedf40e9c1911dc1e63e26bc9a59692b9 Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Thu, 6 Jun 2024 12:56:33 -0700 Subject: serial: bcm63xx-uart: fix tx after conversion to uart_port_tx_limited() When bcm63xx-uart was converted to uart_port_tx_limited(), it implicitly added a call to stop_tx(). This causes garbage to be put out on the serial console. To fix this, pass UART_TX_NOSTOP in flags, and manually call stop_tx() ourselves analogue to how a similar issue was fixed in commit 7be50f2e8f20 ("serial: mxs-auart: fix tx"). Fixes: d11cc8c3c4b6 ("tty: serial: use uart_port_tx_limited()") Cc: stable@vger.kernel.org Signed-off-by: Jonas Gorski Signed-off-by: Doug Brown Link: https://lore.kernel.org/r/20240606195632.173255-4-doug@schmorgal.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/bcm63xx_uart.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c index 34801a6f300b..b88cc28c94e3 100644 --- a/drivers/tty/serial/bcm63xx_uart.c +++ b/drivers/tty/serial/bcm63xx_uart.c @@ -308,8 +308,8 @@ static void bcm_uart_do_tx(struct uart_port *port) val = bcm_uart_readl(port, UART_MCTL_REG); val = (val & UART_MCTL_TXFIFOFILL_MASK) >> UART_MCTL_TXFIFOFILL_SHIFT; - - pending = uart_port_tx_limited(port, ch, port->fifosize - val, + pending = uart_port_tx_limited_flags(port, ch, UART_TX_NOSTOP, + port->fifosize - val, true, bcm_uart_writel(port, ch, UART_FIFO_REG), ({})); @@ -320,6 +320,9 @@ static void bcm_uart_do_tx(struct uart_port *port) val = bcm_uart_readl(port, UART_IR_REG); val &= ~UART_TX_INT_MASK; bcm_uart_writel(port, val, UART_IR_REG); + + if (uart_tx_stopped(port)) + bcm_uart_stop_tx(port); } /* -- cgit v1.2.3 From 7312b740b70e77ccdc0dce11316f05861907d3ca Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 25 Jun 2024 07:54:54 +0200 Subject: Revert "serial: core: Fix ifdef for serial base console functions" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit b20172ca6bf489534892b801a5db41bbf5ceec75. Let's roll back all of the serial core and printk console changes that went into 6.10-rc1 as there still are problems with them that need to be sorted out. Link: https://lore.kernel.org/r/ZnpRozsdw6zbjqze@tlindgre-MOBL1 Reported-by: Petr Mladek Reported-by: Tony Lindgren Cc: Jiri Slaby Cc: John Ogness Cc: Sergey Senozhatsky Cc: Andy Shevchenko Cc: Ilpo Järvinen Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_base_bus.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/serial_base_bus.c b/drivers/tty/serial/serial_base_bus.c index 73c6ee540c83..281a2d5a7332 100644 --- a/drivers/tty/serial/serial_base_bus.c +++ b/drivers/tty/serial/serial_base_bus.c @@ -219,6 +219,8 @@ static int serial_base_add_one_prefcon(const char *match, const char *dev_name, return ret; } +#endif + #ifdef __sparc__ /* Handle Sparc ttya and ttyb options as done in console_setup() */ @@ -317,8 +319,6 @@ int serial_base_add_preferred_console(struct uart_driver *drv, return serial_base_add_one_prefcon(port_match, drv->dev_name, port->line); } -#endif - #ifdef CONFIG_SERIAL_8250_CONSOLE /* -- cgit v1.2.3 From 3ddbc427df968f50e6048368fc01088d428491c7 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 25 Jun 2024 07:57:48 +0200 Subject: Revert "serial: 8250: Fix add preferred console for serial8250_isa_init_ports()" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 4547cd76f08a6f301f6ad563f5d0e4566924ec6b. Let's roll back all of the serial core and printk console changes that went into 6.10-rc1 as there still are problems with them that need to be sorted out. Link: https://lore.kernel.org/r/ZnpRozsdw6zbjqze@tlindgre-MOBL1 Reported-by: Petr Mladek Reported-by: Tony Lindgren Cc: Jiri Slaby Cc: John Ogness Cc: Sergey Senozhatsky Cc: Andy Shevchenko Cc: Ilpo Järvinen Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_base.h | 10 ++-------- drivers/tty/serial/serial_base_bus.c | 11 +++++++++-- 2 files changed, 11 insertions(+), 10 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/serial_base.h b/drivers/tty/serial/serial_base.h index 743a72ac34f3..40af7052b4b6 100644 --- a/drivers/tty/serial/serial_base.h +++ b/drivers/tty/serial/serial_base.h @@ -55,6 +55,8 @@ void serial_core_unregister_port(struct uart_driver *drv, struct uart_port *port int serial_base_add_preferred_console(struct uart_driver *drv, struct uart_port *port); +int serial_base_add_isa_preferred_console(const char *name, int idx); + #else static inline @@ -64,14 +66,6 @@ int serial_base_add_preferred_console(struct uart_driver *drv, return 0; } -#endif - -#ifdef CONFIG_SERIAL_8250_CONSOLE - -int serial_base_add_isa_preferred_console(const char *name, int idx); - -#else - static inline int serial_base_add_isa_preferred_console(const char *name, int idx) { diff --git a/drivers/tty/serial/serial_base_bus.c b/drivers/tty/serial/serial_base_bus.c index 281a2d5a7332..ae18871c0f36 100644 --- a/drivers/tty/serial/serial_base_bus.c +++ b/drivers/tty/serial/serial_base_bus.c @@ -219,8 +219,6 @@ static int serial_base_add_one_prefcon(const char *match, const char *dev_name, return ret; } -#endif - #ifdef __sparc__ /* Handle Sparc ttya and ttyb options as done in console_setup() */ @@ -331,6 +329,15 @@ int serial_base_add_isa_preferred_console(const char *name, int idx) return serial_base_add_prefcon(name, idx); } +#else + +int serial_base_add_isa_preferred_console(const char *name, int idx) +{ + return 0; +} + +#endif + #endif static int serial_base_init(void) -- cgit v1.2.3 From 740a79675833db5e14c89113d94be769ab8369c0 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 25 Jun 2024 07:57:55 +0200 Subject: Revert "serial: 8250: Add preferred console in serial8250_isa_init_ports()" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit a8b04cfe7dad84e65df5996e14b435fd356fe62c. Let's roll back all of the serial core and printk console changes that went into 6.10-rc1 as there still are problems with them that need to be sorted out. Link: https://lore.kernel.org/r/ZnpRozsdw6zbjqze@tlindgre-MOBL1 Reported-by: Petr Mladek Reported-by: Tony Lindgren Cc: Jiri Slaby Cc: John Ogness Cc: Sergey Senozhatsky Cc: Andy Shevchenko Cc: Ilpo Järvinen Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_core.c | 5 ----- drivers/tty/serial/serial_base.h | 8 -------- drivers/tty/serial/serial_base_bus.c | 21 --------------------- 3 files changed, 34 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index ff15022369e4..b0adafc44747 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -15,7 +15,6 @@ */ #include -#include #include #include #include @@ -42,8 +41,6 @@ #include -#include "../serial_base.h" /* For serial_base_add_isa_preferred_console() */ - #include "8250.h" /* @@ -563,8 +560,6 @@ static void __init serial8250_isa_init_ports(void) port->irqflags |= irqflag; if (serial8250_isa_config != NULL) serial8250_isa_config(i, &up->port, &up->capabilities); - - serial_base_add_isa_preferred_console(serial8250_reg.dev_name, i); } } diff --git a/drivers/tty/serial/serial_base.h b/drivers/tty/serial/serial_base.h index 40af7052b4b6..68a86df984da 100644 --- a/drivers/tty/serial/serial_base.h +++ b/drivers/tty/serial/serial_base.h @@ -55,8 +55,6 @@ void serial_core_unregister_port(struct uart_driver *drv, struct uart_port *port int serial_base_add_preferred_console(struct uart_driver *drv, struct uart_port *port); -int serial_base_add_isa_preferred_console(const char *name, int idx); - #else static inline @@ -66,10 +64,4 @@ int serial_base_add_preferred_console(struct uart_driver *drv, return 0; } -static inline -int serial_base_add_isa_preferred_console(const char *name, int idx) -{ - return 0; -} - #endif diff --git a/drivers/tty/serial/serial_base_bus.c b/drivers/tty/serial/serial_base_bus.c index ae18871c0f36..1375be3315e6 100644 --- a/drivers/tty/serial/serial_base_bus.c +++ b/drivers/tty/serial/serial_base_bus.c @@ -317,27 +317,6 @@ int serial_base_add_preferred_console(struct uart_driver *drv, return serial_base_add_one_prefcon(port_match, drv->dev_name, port->line); } -#ifdef CONFIG_SERIAL_8250_CONSOLE - -/* - * Early ISA ports initialize the console before there is no struct device. - * This should be only called from serial8250_isa_init_preferred_console(), - * other callers are likely wrong and should rely on earlycon instead. - */ -int serial_base_add_isa_preferred_console(const char *name, int idx) -{ - return serial_base_add_prefcon(name, idx); -} - -#else - -int serial_base_add_isa_preferred_console(const char *name, int idx) -{ - return 0; -} - -#endif - #endif static int serial_base_init(void) -- cgit v1.2.3 From e406c56dd9e35cc0b456b592d6814b5d2d8791de Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 25 Jun 2024 07:57:58 +0200 Subject: Revert "serial: core: Handle serial console options" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit a0f32e2dd99867b164bfebcf36729c2a0d41b30b. Let's roll back all of the serial core and printk console changes that went into 6.10-rc1 as there still are problems with them that need to be sorted out. Link: https://lore.kernel.org/r/ZnpRozsdw6zbjqze@tlindgre-MOBL1 Reported-by: Petr Mladek Reported-by: Tony Lindgren Cc: Jiri Slaby Cc: John Ogness Cc: Sergey Senozhatsky Cc: Andy Shevchenko Cc: Ilpo Järvinen Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_base_bus.c | 49 ------------------------------------ 1 file changed, 49 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/serial_base_bus.c b/drivers/tty/serial/serial_base_bus.c index 1375be3315e6..4ef26a1b09b1 100644 --- a/drivers/tty/serial/serial_base_bus.c +++ b/drivers/tty/serial/serial_base_bus.c @@ -219,58 +219,9 @@ static int serial_base_add_one_prefcon(const char *match, const char *dev_name, return ret; } -#ifdef __sparc__ - -/* Handle Sparc ttya and ttyb options as done in console_setup() */ -static int serial_base_add_sparc_console(const char *dev_name, int idx) -{ - const char *name; - - switch (idx) { - case 0: - name = "ttya"; - break; - case 1: - name = "ttyb"; - break; - default: - return 0; - } - - return serial_base_add_one_prefcon(name, dev_name, idx); -} - -#else - -static inline int serial_base_add_sparc_console(const char *dev_name, int idx) -{ - return 0; -} - -#endif - static int serial_base_add_prefcon(const char *name, int idx) { const char *char_match __free(kfree) = NULL; - const char *nmbr_match __free(kfree) = NULL; - int ret; - - /* Handle ttyS specific options */ - if (strstarts(name, "ttyS")) { - /* No name, just a number */ - nmbr_match = kasprintf(GFP_KERNEL, "%i", idx); - if (!nmbr_match) - return -ENODEV; - - ret = serial_base_add_one_prefcon(nmbr_match, name, idx); - if (ret) - return ret; - - /* Sparc ttya and ttyb */ - ret = serial_base_add_sparc_console(name, idx); - if (ret) - return ret; - } /* Handle the traditional character device name style console=ttyS0 */ char_match = kasprintf(GFP_KERNEL, "%s%i", name, idx); -- cgit v1.2.3 From a5e4bb69ecddb4ad7895e21091f3657ad832e270 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 25 Jun 2024 07:58:00 +0200 Subject: Revert "serial: core: Add support for DEVNAME:0.0 style naming for kernel console" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 787a1cabac01c99846070fcf702e53befaf89f79. Let's roll back all of the serial core and printk console changes that went into 6.10-rc1 as there still are problems with them that need to be sorted out. Link: https://lore.kernel.org/r/ZnpRozsdw6zbjqze@tlindgre-MOBL1 Reported-by: Petr Mladek Reported-by: Tony Lindgren Cc: Jiri Slaby Cc: John Ogness Cc: Sergey Senozhatsky Cc: Andy Shevchenko Cc: Ilpo Järvinen Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_base.h | 16 --------- drivers/tty/serial/serial_base_bus.c | 66 ------------------------------------ drivers/tty/serial/serial_core.c | 4 --- 3 files changed, 86 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/serial_base.h b/drivers/tty/serial/serial_base.h index 68a86df984da..b6c38d2edfd4 100644 --- a/drivers/tty/serial/serial_base.h +++ b/drivers/tty/serial/serial_base.h @@ -49,19 +49,3 @@ void serial_ctrl_unregister_port(struct uart_driver *drv, struct uart_port *port int serial_core_register_port(struct uart_driver *drv, struct uart_port *port); void serial_core_unregister_port(struct uart_driver *drv, struct uart_port *port); - -#ifdef CONFIG_SERIAL_CORE_CONSOLE - -int serial_base_add_preferred_console(struct uart_driver *drv, - struct uart_port *port); - -#else - -static inline -int serial_base_add_preferred_console(struct uart_driver *drv, - struct uart_port *port) -{ - return 0; -} - -#endif diff --git a/drivers/tty/serial/serial_base_bus.c b/drivers/tty/serial/serial_base_bus.c index 4ef26a1b09b1..4df2a4b10445 100644 --- a/drivers/tty/serial/serial_base_bus.c +++ b/drivers/tty/serial/serial_base_bus.c @@ -8,7 +8,6 @@ * The serial core bus manages the serial core controller instances. */ -#include #include #include #include @@ -205,71 +204,6 @@ void serial_base_port_device_remove(struct serial_port_device *port_dev) put_device(&port_dev->dev); } -#ifdef CONFIG_SERIAL_CORE_CONSOLE - -static int serial_base_add_one_prefcon(const char *match, const char *dev_name, - int port_id) -{ - int ret; - - ret = add_preferred_console_match(match, dev_name, port_id); - if (ret == -ENOENT) - return 0; - - return ret; -} - -static int serial_base_add_prefcon(const char *name, int idx) -{ - const char *char_match __free(kfree) = NULL; - - /* Handle the traditional character device name style console=ttyS0 */ - char_match = kasprintf(GFP_KERNEL, "%s%i", name, idx); - if (!char_match) - return -ENOMEM; - - return serial_base_add_one_prefcon(char_match, name, idx); -} - -/** - * serial_base_add_preferred_console - Adds a preferred console - * @drv: Serial port device driver - * @port: Serial port instance - * - * Tries to add a preferred console for a serial port if specified in the - * kernel command line. Supports both the traditional character device such - * as console=ttyS0, and a hardware addressing based console=DEVNAME:0.0 - * style name. - * - * Translates the kernel command line option using a hardware based addressing - * console=DEVNAME:0.0 to the serial port character device such as ttyS0. - * Cannot be called early for ISA ports, depends on struct device. - * - * Note that duplicates are ignored by add_preferred_console(). - * - * Return: 0 on success, negative error code on failure. - */ -int serial_base_add_preferred_console(struct uart_driver *drv, - struct uart_port *port) -{ - const char *port_match __free(kfree) = NULL; - int ret; - - ret = serial_base_add_prefcon(drv->dev_name, port->line); - if (ret) - return ret; - - port_match = kasprintf(GFP_KERNEL, "%s:%i.%i", dev_name(port->dev), - port->ctrl_id, port->port_id); - if (!port_match) - return -ENOMEM; - - /* Translate a hardware addressing style console=DEVNAME:0.0 */ - return serial_base_add_one_prefcon(port_match, drv->dev_name, port->line); -} - -#endif - static int serial_base_init(void) { int ret; diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 0c4d60976663..2a8006e3d687 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -3422,10 +3422,6 @@ int serial_core_register_port(struct uart_driver *drv, struct uart_port *port) if (ret) goto err_unregister_ctrl_dev; - ret = serial_base_add_preferred_console(drv, port); - if (ret) - goto err_unregister_port_dev; - ret = serial_core_add_one_port(drv, port); if (ret) goto err_unregister_port_dev; -- cgit v1.2.3