From 3a5c09c8d1ed9a7323f0e5c435021531f0865c16 Mon Sep 17 00:00:00 2001 From: Pratyush Yadav Date: Wed, 23 Dec 2020 00:14:19 +0530 Subject: spi: cadence-quadspi: Set master max_speed_hz As of commit 9326e4f1e5dd ("spi: Limit the spi device max speed to controller's max speed"), the SPI device max speed is set to the controller's max speed if it is larger. The Cadence QSPI controller does not set the controller's max speed so it is left at its initial value of 0. This means the SPI device max speed is always set to 0. The SPI device max speed is used to calculate the baud rate divider when performing an operation. If this speed is 0, the default divider of 32 is used. No matter what speed is specified by the device tree property 'spi-max-frequency', the device will always operate at ref_clk / 32. Fix this by setting master->max_speed_hz to the ref clock speed so the correct divider can be calculated. Signed-off-by: Pratyush Yadav Link: https://lore.kernel.org/r/20201222184425.7028-2-p.yadav@ti.com Signed-off-by: Mark Brown --- drivers/spi/spi-cadence-quadspi.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/spi/spi-cadence-quadspi.c') diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c index ba7d40c2922f..ea3890c7d9ff 100644 --- a/drivers/spi/spi-cadence-quadspi.c +++ b/drivers/spi/spi-cadence-quadspi.c @@ -1279,6 +1279,7 @@ static int cqspi_probe(struct platform_device *pdev) reset_control_deassert(rstc_ocp); cqspi->master_ref_clk_hz = clk_get_rate(cqspi->clk); + master->max_speed_hz = cqspi->master_ref_clk_hz; ddata = of_device_get_match_data(dev); if (ddata) { if (ddata->quirks & CQSPI_NEEDS_WR_DELAY) -- cgit v1.2.3