From 7bbdc3d51cf793dd81c38f794f4cb73df58d1527 Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Mon, 4 Feb 2008 22:27:54 -0800 Subject: serial: MPSC: set baudrate when BRG divider is set. The clock to generate the desired baudrate with the MPSC is first divided by the Baud Rate Generator (BRG) and then by the MPSC itself. So, when the BRG divider is changed, the MPSC divider must also be changed to generate the correct baudrate. During MPSC initialization, the BRG divider is changed but the MPSC divider isn't changed until much later. This results in some printk's coming out garbled. To fix that, set the MPSC divider at the same time that the BRG divider is changed. Signed-off-by: Mark A. Greer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/mpsc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/serial/mpsc.c') diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c index 4d643c926657..cb3a91967742 100644 --- a/drivers/serial/mpsc.c +++ b/drivers/serial/mpsc.c @@ -612,6 +612,7 @@ static void mpsc_hw_init(struct mpsc_port_info *pi) /* No preamble, 16x divider, low-latency, */ writel(0x04400400, pi->mpsc_base + MPSC_MMCRH); + mpsc_set_baudrate(pi, pi->default_baud); if (pi->mirror_regs) { pi->MPSC_CHR_1_m = 0; -- cgit v1.2.3