From df7baa506c2db1c2d12abd6f05c43f911da55a2e Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Fri, 13 Oct 2006 09:33:39 -0700 Subject: [SCSI] qla2xxx: Correct QUEUE_FULL handling. - Drop queue-depths across all luns for a given fcport during TASK_SET_FULL statuses. - Ramp-up I/Os after throttling. - Consolidate completion-status handling of CS_QUEUE_FULL with CS_COMPLETE as ISP24xx firmware no longer reports CS_QUEUE_FULL. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) (limited to 'drivers/scsi/qla2xxx/qla_os.c') diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 54f561d9c7a7..208607be78c7 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -77,6 +77,19 @@ MODULE_PARM_DESC(ql2xfdmienable, "Enables FDMI registratons " "Default is 0 - no FDMI. 1 - perfom FDMI."); +#define MAX_Q_DEPTH 32 +static int ql2xmaxqdepth = MAX_Q_DEPTH; +module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(ql2xmaxqdepth, + "Maximum queue depth to report for target devices."); + +int ql2xqfullrampup = 120; +module_param(ql2xqfullrampup, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(ql2xqfullrampup, + "Number of seconds to wait to begin to ramp-up the queue " + "depth for a device after a queue-full condition has been " + "detected. Default is 120 seconds."); + /* * SCSI host template entry points */ @@ -1104,9 +1117,9 @@ qla2xxx_slave_configure(struct scsi_device *sdev) struct fc_rport *rport = starget_to_rport(sdev->sdev_target); if (sdev->tagged_supported) - scsi_activate_tcq(sdev, 32); + scsi_activate_tcq(sdev, ha->max_q_depth); else - scsi_deactivate_tcq(sdev, 32); + scsi_deactivate_tcq(sdev, ha->max_q_depth); rport->dev_loss_tmo = ha->port_down_retry_count + 5; @@ -1413,6 +1426,10 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) ha->link_data_rate = PORT_SPEED_UNKNOWN; ha->optrom_size = OPTROM_SIZE_2300; + ha->max_q_depth = MAX_Q_DEPTH; + if (ql2xmaxqdepth != 0 && ql2xmaxqdepth <= 0xffffU) + ha->max_q_depth = ql2xmaxqdepth; + /* Assign ISP specific operations. */ ha->isp_ops.pci_config = qla2100_pci_config; ha->isp_ops.reset_chip = qla2x00_reset_chip; -- cgit v1.2.3