From 99ea37bd1e7d727bb54c0c4a46708b3e6aa01180 Mon Sep 17 00:00:00 2001 From: Matti Vaittinen Date: Tue, 22 Jan 2019 11:46:08 +0200 Subject: regulator: bd70528: Support ROHM BD70528 regulator block BD70528MWV is an ultra-low Iq general purpose single-chip power management IC for battery-powered portable devices. Add support for controlling 3 bucks and 3 LDOs present in ROHM BD70528. Signed-off-by: Matti Vaittinen Signed-off-by: Mark Brown --- drivers/regulator/bd70528-regulator.c | 290 ++++++++++++++++++++++++++++++++++ 1 file changed, 290 insertions(+) create mode 100644 drivers/regulator/bd70528-regulator.c (limited to 'drivers/regulator/bd70528-regulator.c') diff --git a/drivers/regulator/bd70528-regulator.c b/drivers/regulator/bd70528-regulator.c new file mode 100644 index 000000000000..0cf261c469b9 --- /dev/null +++ b/drivers/regulator/bd70528-regulator.c @@ -0,0 +1,290 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2018 ROHM Semiconductors +// bd70528-regulator.c ROHM BD70528MWV regulator driver + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define BUCK_RAMPRATE_250MV 0 +#define BUCK_RAMPRATE_125MV 1 +#define BUCK_RAMP_MAX 250 + +static struct regulator_linear_range bd70528_buck1_volts[] = { + REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x1, 600000), + REGULATOR_LINEAR_RANGE(2750000, 0x2, 0xf, 50000), +}; +static struct regulator_linear_range bd70528_buck2_volts[] = { + REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x1, 300000), + REGULATOR_LINEAR_RANGE(1550000, 0x2, 0xd, 50000), + REGULATOR_LINEAR_RANGE(3000000, 0xe, 0xf, 300000), +}; +static struct regulator_linear_range bd70528_buck3_volts[] = { + REGULATOR_LINEAR_RANGE(800000, 0x00, 0xd, 50000), + REGULATOR_LINEAR_RANGE(1800000, 0xe, 0xf, 0), +}; + +/* All LDOs have same voltage ranges */ +static struct regulator_linear_range bd70528_ldo_volts[] = { + REGULATOR_LINEAR_RANGE(1650000, 0x0, 0x07, 50000), + REGULATOR_LINEAR_RANGE(2100000, 0x8, 0x0f, 100000), + REGULATOR_LINEAR_RANGE(2850000, 0x10, 0x19, 50000), + REGULATOR_LINEAR_RANGE(3300000, 0x19, 0x1f, 0), +}; + +/* Also both LEDs support same voltages */ +static const unsigned int led_volts[] = { + 20000, 30000 +}; + +static int bd70528_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) +{ + if (ramp_delay > 0 && ramp_delay <= BUCK_RAMP_MAX) { + unsigned int ramp_value = BUCK_RAMPRATE_250MV; + + if (ramp_delay <= 125) + ramp_value = BUCK_RAMPRATE_125MV; + + return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg, + BD70528_MASK_BUCK_RAMP, + ramp_value << BD70528_SIFT_BUCK_RAMP); + } + dev_err(&rdev->dev, "%s: ramp_delay: %d not supported\n", + rdev->desc->name, ramp_delay); + return -EINVAL; +} + +static int bd70528_led_set_voltage_sel(struct regulator_dev *rdev, + unsigned int sel) +{ + int ret; + + ret = regulator_is_enabled_regmap(rdev); + if (ret < 0) + return ret; + + if (ret == 0) + return regulator_set_voltage_sel_regmap(rdev, sel); + + dev_err(&rdev->dev, + "LED voltage change not allowed when led is enabled\n"); + + return -EBUSY; +} + +static struct regulator_ops bd70528_buck_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_ramp_delay = bd70528_set_ramp_delay, +}; + +static struct regulator_ops bd70528_ldo_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_ramp_delay = bd70528_set_ramp_delay, +}; + +static struct regulator_ops bd70528_led_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_table, + .set_voltage_sel = bd70528_led_set_voltage_sel, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + + +static struct regulator_desc bd70528_desc[] = { + { + .name = "buck1", + .of_match = of_match_ptr("BUCK1"), + .regulators_node = of_match_ptr("regulators"), + .id = BD70528_BUCK1, + .ops = &bd70528_buck_ops, + .type = REGULATOR_VOLTAGE, + .linear_ranges = bd70528_buck1_volts, + .n_linear_ranges = ARRAY_SIZE(bd70528_buck1_volts), + .n_voltages = BD70528_BUCK_VOLTS, + .enable_reg = BD70528_REG_BUCK1_EN, + .enable_mask = BD70528_MASK_RUN_EN, + .vsel_reg = BD70528_REG_BUCK1_VOLT, + .vsel_mask = BD70528_MASK_BUCK_VOLT, + .owner = THIS_MODULE, + }, + { + .name = "buck2", + .of_match = of_match_ptr("BUCK2"), + .regulators_node = of_match_ptr("regulators"), + .id = BD70528_BUCK2, + .ops = &bd70528_buck_ops, + .type = REGULATOR_VOLTAGE, + .linear_ranges = bd70528_buck2_volts, + .n_linear_ranges = ARRAY_SIZE(bd70528_buck2_volts), + .n_voltages = BD70528_BUCK_VOLTS, + .enable_reg = BD70528_REG_BUCK2_EN, + .enable_mask = BD70528_MASK_RUN_EN, + .vsel_reg = BD70528_REG_BUCK2_VOLT, + .vsel_mask = BD70528_MASK_BUCK_VOLT, + .owner = THIS_MODULE, + }, + { + .name = "buck3", + .of_match = of_match_ptr("BUCK3"), + .regulators_node = of_match_ptr("regulators"), + .id = BD70528_BUCK3, + .ops = &bd70528_buck_ops, + .type = REGULATOR_VOLTAGE, + .linear_ranges = bd70528_buck3_volts, + .n_linear_ranges = ARRAY_SIZE(bd70528_buck3_volts), + .n_voltages = BD70528_BUCK_VOLTS, + .enable_reg = BD70528_REG_BUCK3_EN, + .enable_mask = BD70528_MASK_RUN_EN, + .vsel_reg = BD70528_REG_BUCK3_VOLT, + .vsel_mask = BD70528_MASK_BUCK_VOLT, + .owner = THIS_MODULE, + }, + { + .name = "ldo1", + .of_match = of_match_ptr("LDO1"), + .regulators_node = of_match_ptr("regulators"), + .id = BD70528_LDO1, + .ops = &bd70528_ldo_ops, + .type = REGULATOR_VOLTAGE, + .linear_ranges = bd70528_ldo_volts, + .n_linear_ranges = ARRAY_SIZE(bd70528_ldo_volts), + .n_voltages = BD70528_LDO_VOLTS, + .enable_reg = BD70528_REG_LDO1_EN, + .enable_mask = BD70528_MASK_RUN_EN, + .vsel_reg = BD70528_REG_LDO1_VOLT, + .vsel_mask = BD70528_MASK_LDO_VOLT, + .owner = THIS_MODULE, + }, + { + .name = "ldo2", + .of_match = of_match_ptr("LDO2"), + .regulators_node = of_match_ptr("regulators"), + .id = BD70528_LDO2, + .ops = &bd70528_ldo_ops, + .type = REGULATOR_VOLTAGE, + .linear_ranges = bd70528_ldo_volts, + .n_linear_ranges = ARRAY_SIZE(bd70528_ldo_volts), + .n_voltages = BD70528_LDO_VOLTS, + .enable_reg = BD70528_REG_LDO2_EN, + .enable_mask = BD70528_MASK_RUN_EN, + .vsel_reg = BD70528_REG_LDO2_VOLT, + .vsel_mask = BD70528_MASK_LDO_VOLT, + .owner = THIS_MODULE, + }, + { + .name = "ldo3", + .of_match = of_match_ptr("LDO3"), + .regulators_node = of_match_ptr("regulators"), + .id = BD70528_LDO3, + .ops = &bd70528_ldo_ops, + .type = REGULATOR_VOLTAGE, + .linear_ranges = bd70528_ldo_volts, + .n_linear_ranges = ARRAY_SIZE(bd70528_ldo_volts), + .n_voltages = BD70528_LDO_VOLTS, + .enable_reg = BD70528_REG_LDO3_EN, + .enable_mask = BD70528_MASK_RUN_EN, + .vsel_reg = BD70528_REG_LDO3_VOLT, + .vsel_mask = BD70528_MASK_LDO_VOLT, + .owner = THIS_MODULE, + }, + { + .name = "ldo_led1", + .of_match = of_match_ptr("LDO_LED1"), + .regulators_node = of_match_ptr("regulators"), + .id = BD70528_LED1, + .ops = &bd70528_led_ops, + .type = REGULATOR_VOLTAGE, + .volt_table = &led_volts[0], + .n_voltages = ARRAY_SIZE(led_volts), + .enable_reg = BD70528_REG_LED_EN, + .enable_mask = BD70528_MASK_LED1_EN, + .vsel_reg = BD70528_REG_LED_VOLT, + .vsel_mask = BD70528_MASK_LED1_VOLT, + .owner = THIS_MODULE, + }, + { + .name = "ldo_led2", + .of_match = of_match_ptr("LDO_LED2"), + .regulators_node = of_match_ptr("regulators"), + .id = BD70528_LED2, + .ops = &bd70528_led_ops, + .type = REGULATOR_VOLTAGE, + .volt_table = &led_volts[0], + .n_voltages = ARRAY_SIZE(led_volts), + .enable_reg = BD70528_REG_LED_EN, + .enable_mask = BD70528_MASK_LED2_EN, + .vsel_reg = BD70528_REG_LED_VOLT, + .vsel_mask = BD70528_MASK_LED2_VOLT, + .owner = THIS_MODULE, + }, + +}; + +static int bd70528_probe(struct platform_device *pdev) +{ + struct bd70528 *bd70528; + int i; + struct regulator_config config = { + .dev = pdev->dev.parent, + }; + + bd70528 = dev_get_drvdata(pdev->dev.parent); + if (!bd70528) { + dev_err(&pdev->dev, "No MFD driver data\n"); + return -EINVAL; + } + + config.regmap = bd70528->chip.regmap; + + for (i = 0; i < ARRAY_SIZE(bd70528_desc); i++) { + struct regulator_dev *rdev; + + rdev = devm_regulator_register(&pdev->dev, &bd70528_desc[i], + &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, + "failed to register %s regulator\n", + bd70528_desc[i].name); + return PTR_ERR(rdev); + } + } + return 0; +} + +static struct platform_driver bd70528_regulator = { + .driver = { + .name = "bd70528-pmic" + }, + .probe = bd70528_probe, +}; + +module_platform_driver(bd70528_regulator); + +MODULE_AUTHOR("Matti Vaittinen "); +MODULE_DESCRIPTION("BD70528 voltage regulator driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3