From 522498f8cb8c547f415a9a39fb54fd1f7e1a1eda Mon Sep 17 00:00:00 2001 From: Matti Vaittinen Date: Wed, 11 Dec 2019 11:46:11 +0200 Subject: regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators ROHM BD71828 is a power management IC containing 7 bucks and 7 LDOs. Bucks 1,2,6 and 7 can be assigned to a regulator group controlled by run-levels. Eg. Voltages and enable/disable statuses for specific run-levels (run0 to run3) can be set via register interface and run level changes can then be done either via I2C or GPIO. This initial commit does not support assigning bucks to be controlled via run-levels but only allows them to be individually controlled. LDO5 voltage can also be controlled by GPIO2 pin and register interfaces but this driver only supports the control via register. Signed-off-by: Matti Vaittinen Link: https://lore.kernel.org/r/5b1c4a22c7945e97ff2a7924abfeb3239043f8eb.1576054779.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown --- drivers/regulator/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/regulator/Makefile') diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 2210ba56f9bd..9eccf93bc3ab 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o obj-$(CONFIG_REGULATOR_BD70528) += bd70528-regulator.o +obj-$(CONFIG_REGULATOR_BD71828) += bd71828-regulator.o obj-$(CONFIG_REGULATOR_BD718XX) += bd718x7-regulator.o obj-$(CONFIG_REGULATOR_BD9571MWV) += bd9571mwv-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o -- cgit v1.2.3