From 719606154c7033c068a5d4c1dc5f9163b814b3c8 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 13 Sep 2023 09:04:27 +0300 Subject: phy: mapphone-mdm6600: Fix runtime disable on probe Commit d644e0d79829 ("phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe") caused a regression where we now unconditionally disable runtime PM at the end of the probe while it is only needed on errors. Cc: Ivaylo Dimitrov Cc: Merlijn Wajer Cc: Miaoqian Lin Cc: Pavel Machek Reviewed-by: Sebastian Reichel Fixes: d644e0d79829 ("phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe") Signed-off-by: Tony Lindgren Link: https://lore.kernel.org/r/20230913060433.48373-1-tony@atomide.com Signed-off-by: Vinod Koul --- drivers/phy/motorola/phy-mapphone-mdm6600.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers/phy') diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c index 1d567604b650..0147112f77b1 100644 --- a/drivers/phy/motorola/phy-mapphone-mdm6600.c +++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c @@ -627,10 +627,12 @@ idle: pm_runtime_put_autosuspend(ddata->dev); cleanup: - if (error < 0) + if (error < 0) { phy_mdm6600_device_power_off(ddata); - pm_runtime_disable(ddata->dev); - pm_runtime_dont_use_autosuspend(ddata->dev); + pm_runtime_disable(ddata->dev); + pm_runtime_dont_use_autosuspend(ddata->dev); + } + return error; } -- cgit v1.2.3 From b99e0ba9633af51638e5ee1668da2e33620c134f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 13 Sep 2023 09:04:28 +0300 Subject: phy: mapphone-mdm6600: Fix runtime PM for remove Otherwise we will get an underflow on remove. Cc: Ivaylo Dimitrov Cc: Merlijn Wajer Cc: Pavel Machek Cc: Sebastian Reichel Fixes: f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend") Signed-off-by: Tony Lindgren Reviewed-by: Sebastian Reichel Link: https://lore.kernel.org/r/20230913060433.48373-2-tony@atomide.com Signed-off-by: Vinod Koul --- drivers/phy/motorola/phy-mapphone-mdm6600.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/phy') diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c index 0147112f77b1..df48b1becebe 100644 --- a/drivers/phy/motorola/phy-mapphone-mdm6600.c +++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c @@ -641,6 +641,7 @@ static void phy_mdm6600_remove(struct platform_device *pdev) struct phy_mdm6600 *ddata = platform_get_drvdata(pdev); struct gpio_desc *reset_gpio = ddata->ctrl_gpios[PHY_MDM6600_RESET]; + pm_runtime_get_noresume(ddata->dev); pm_runtime_dont_use_autosuspend(ddata->dev); pm_runtime_put_sync(ddata->dev); pm_runtime_disable(ddata->dev); -- cgit v1.2.3 From 3b384cc74b00b5ac21d18e4c1efc3c1da5300971 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 13 Sep 2023 09:04:29 +0300 Subject: phy: mapphone-mdm6600: Fix pinctrl_pm handling for sleep pins Looks like the driver sleep pins configuration is unusable. Adding the sleep pins causes the usb phy to not respond. We need to use the default pins in probe, and only set sleep pins at phy_mdm6600_device_power_off(). As the modem can also be booted to a serial port mode for firmware flashing, let's make the pin changes limited to probe and remove. For probe, we get the default pins automatically. We only need to set the sleep pins in phy_mdm6600_device_power_off() to prevent the modem from waking up because the gpio line glitches. If it turns out that we need a separate state for phy_mdm6600_power_on() and phy_mdm6600_power_off(), we can use the pinctrl idle state. Cc: Ivaylo Dimitrov Cc: Merlijn Wajer Cc: Pavel Machek Cc: Sebastian Reichel Fixes: 2ad2af081622 ("phy: mapphone-mdm6600: Improve phy related runtime PM calls") Signed-off-by: Tony Lindgren Reviewed-by: Sebastian Reichel Link: https://lore.kernel.org/r/20230913060433.48373-3-tony@atomide.com Signed-off-by: Vinod Koul --- drivers/phy/motorola/phy-mapphone-mdm6600.c | 29 ++++++++++++----------------- 1 file changed, 12 insertions(+), 17 deletions(-) (limited to 'drivers/phy') diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c index df48b1becebe..376d023a0aa9 100644 --- a/drivers/phy/motorola/phy-mapphone-mdm6600.c +++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c @@ -122,16 +122,10 @@ static int phy_mdm6600_power_on(struct phy *x) { struct phy_mdm6600 *ddata = phy_get_drvdata(x); struct gpio_desc *enable_gpio = ddata->ctrl_gpios[PHY_MDM6600_ENABLE]; - int error; if (!ddata->enabled) return -ENODEV; - error = pinctrl_pm_select_default_state(ddata->dev); - if (error) - dev_warn(ddata->dev, "%s: error with default_state: %i\n", - __func__, error); - gpiod_set_value_cansleep(enable_gpio, 1); /* Allow aggressive PM for USB, it's only needed for n_gsm port */ @@ -160,11 +154,6 @@ static int phy_mdm6600_power_off(struct phy *x) gpiod_set_value_cansleep(enable_gpio, 0); - error = pinctrl_pm_select_sleep_state(ddata->dev); - if (error) - dev_warn(ddata->dev, "%s: error with sleep_state: %i\n", - __func__, error); - return 0; } @@ -456,6 +445,7 @@ static void phy_mdm6600_device_power_off(struct phy_mdm6600 *ddata) { struct gpio_desc *reset_gpio = ddata->ctrl_gpios[PHY_MDM6600_RESET]; + int error; ddata->enabled = false; phy_mdm6600_cmd(ddata, PHY_MDM6600_CMD_BP_SHUTDOWN_REQ); @@ -471,6 +461,17 @@ static void phy_mdm6600_device_power_off(struct phy_mdm6600 *ddata) } else { dev_err(ddata->dev, "Timed out powering down\n"); } + + /* + * Keep reset gpio high with padconf internal pull-up resistor to + * prevent modem from waking up during deeper SoC idle states. The + * gpio bank lines can have glitches if not in the always-on wkup + * domain. + */ + error = pinctrl_pm_select_sleep_state(ddata->dev); + if (error) + dev_warn(ddata->dev, "%s: error with sleep_state: %i\n", + __func__, error); } static void phy_mdm6600_deferred_power_on(struct work_struct *work) @@ -571,12 +572,6 @@ static int phy_mdm6600_probe(struct platform_device *pdev) ddata->dev = &pdev->dev; platform_set_drvdata(pdev, ddata); - /* Active state selected in phy_mdm6600_power_on() */ - error = pinctrl_pm_select_sleep_state(ddata->dev); - if (error) - dev_warn(ddata->dev, "%s: error with sleep_state: %i\n", - __func__, error); - error = phy_mdm6600_init_lines(ddata); if (error) return error; -- cgit v1.2.3 From 2d3465a75c9f83684d17da6807423824bf260524 Mon Sep 17 00:00:00 2001 From: Adrien Thierry Date: Mon, 28 Aug 2023 11:23:50 -0400 Subject: phy: qcom-qmp-usb: initialize PCS_USB registers Currently, PCS_USB registers that have their initialization data in a pcs_usb_tbl table are never initialized. Fix that. Fixes: fc64623637da ("phy: qcom-qmp-combo,usb: add support for separate PCS_USB region") Signed-off-by: Adrien Thierry Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20230828152353.16529-2-athierry@redhat.com Signed-off-by: Vinod Koul --- drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/phy') diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c index 0130bb8e809a..e49262ce6d91 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c @@ -1703,6 +1703,7 @@ static int qmp_usb_power_on(struct phy *phy) void __iomem *tx = qmp->tx; void __iomem *rx = qmp->rx; void __iomem *pcs = qmp->pcs; + void __iomem *pcs_usb = qmp->pcs_usb; void __iomem *status; unsigned int val; int ret; @@ -1726,6 +1727,9 @@ static int qmp_usb_power_on(struct phy *phy) qmp_usb_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num); + if (pcs_usb) + qmp_usb_configure(pcs_usb, cfg->pcs_usb_tbl, cfg->pcs_usb_tbl_num); + if (cfg->has_pwrdn_delay) usleep_range(10, 20); -- cgit v1.2.3 From c599dc5cca4dd6a5c664e4a8837246e68a96cb4c Mon Sep 17 00:00:00 2001 From: Adrien Thierry Date: Mon, 28 Aug 2023 11:23:51 -0400 Subject: phy: qcom-qmp-usb: split PCS_USB init table for sc8280xp and sa8775p For sc8280xp and sa8775p, PCS and PCS_USB initialization data is described in the same table, thus the pcs_usb offset is not being applied during initialization of PCS_USB registers. Fix this by adding the appropriate pcs_usb_tbl tables. Fixes: 8bd2d6e11c99 ("phy: qcom-qmp: Add SA8775P USB3 UNI phy") Fixes: c0c7769cdae2 ("phy: qcom-qmp: Add SC8280XP USB3 UNI phy") Reviewed-by: Dmitry Baryshkov Signed-off-by: Adrien Thierry Link: https://lore.kernel.org/r/20230828152353.16529-3-athierry@redhat.com Signed-off-by: Vinod Koul --- drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) (limited to 'drivers/phy') diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c index e49262ce6d91..c69577601ae0 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c @@ -1112,8 +1112,6 @@ static const struct qmp_phy_init_tbl sc8280xp_usb3_uniphy_pcs_tbl[] = { QMP_PHY_INIT_CFG(QPHY_V5_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03), QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0xaa), QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCS_TX_RX_CONFIG, 0x0c), - QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07), - QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8), QMP_PHY_INIT_CFG(QPHY_V5_PCS_CDR_RESET_TIME, 0x0a), QMP_PHY_INIT_CFG(QPHY_V5_PCS_ALIGN_DETECT_CONFIG1, 0x88), QMP_PHY_INIT_CFG(QPHY_V5_PCS_ALIGN_DETECT_CONFIG2, 0x13), @@ -1122,6 +1120,11 @@ static const struct qmp_phy_init_tbl sc8280xp_usb3_uniphy_pcs_tbl[] = { QMP_PHY_INIT_CFG(QPHY_V5_PCS_REFGEN_REQ_CONFIG1, 0x21), }; +static const struct qmp_phy_init_tbl sc8280xp_usb3_uniphy_pcs_usb_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07), + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8), +}; + static const struct qmp_phy_init_tbl sa8775p_usb3_uniphy_pcs_tbl[] = { QMP_PHY_INIT_CFG(QPHY_V5_PCS_LOCK_DETECT_CONFIG1, 0xc4), QMP_PHY_INIT_CFG(QPHY_V5_PCS_LOCK_DETECT_CONFIG2, 0x89), @@ -1131,9 +1134,6 @@ static const struct qmp_phy_init_tbl sa8775p_usb3_uniphy_pcs_tbl[] = { QMP_PHY_INIT_CFG(QPHY_V5_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03), QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0xaa), QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCS_TX_RX_CONFIG, 0x0c), - QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07), - QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8), - QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_POWER_STATE_CONFIG1, 0x6f), QMP_PHY_INIT_CFG(QPHY_V5_PCS_CDR_RESET_TIME, 0x0a), QMP_PHY_INIT_CFG(QPHY_V5_PCS_ALIGN_DETECT_CONFIG1, 0x88), QMP_PHY_INIT_CFG(QPHY_V5_PCS_ALIGN_DETECT_CONFIG2, 0x13), @@ -1142,6 +1142,12 @@ static const struct qmp_phy_init_tbl sa8775p_usb3_uniphy_pcs_tbl[] = { QMP_PHY_INIT_CFG(QPHY_V5_PCS_REFGEN_REQ_CONFIG1, 0x21), }; +static const struct qmp_phy_init_tbl sa8775p_usb3_uniphy_pcs_usb_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07), + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8), + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_POWER_STATE_CONFIG1, 0x6f), +}; + struct qmp_usb_offsets { u16 serdes; u16 pcs; @@ -1383,6 +1389,8 @@ static const struct qmp_phy_cfg sa8775p_usb3_uniphy_cfg = { .rx_tbl_num = ARRAY_SIZE(sc8280xp_usb3_uniphy_rx_tbl), .pcs_tbl = sa8775p_usb3_uniphy_pcs_tbl, .pcs_tbl_num = ARRAY_SIZE(sa8775p_usb3_uniphy_pcs_tbl), + .pcs_usb_tbl = sa8775p_usb3_uniphy_pcs_usb_tbl, + .pcs_usb_tbl_num = ARRAY_SIZE(sa8775p_usb3_uniphy_pcs_usb_tbl), .clk_list = qmp_v4_phy_clk_l, .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l), .reset_list = qcm2290_usb3phy_reset_l, @@ -1405,6 +1413,8 @@ static const struct qmp_phy_cfg sc8280xp_usb3_uniphy_cfg = { .rx_tbl_num = ARRAY_SIZE(sc8280xp_usb3_uniphy_rx_tbl), .pcs_tbl = sc8280xp_usb3_uniphy_pcs_tbl, .pcs_tbl_num = ARRAY_SIZE(sc8280xp_usb3_uniphy_pcs_tbl), + .pcs_usb_tbl = sc8280xp_usb3_uniphy_pcs_usb_tbl, + .pcs_usb_tbl_num = ARRAY_SIZE(sc8280xp_usb3_uniphy_pcs_usb_tbl), .clk_list = qmp_v4_phy_clk_l, .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l), .reset_list = qcm2290_usb3phy_reset_l, -- cgit v1.2.3 From 5f7cd740a6b657fba775bde744496e5ed21851ca Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Thu, 24 Aug 2023 17:13:45 +0800 Subject: phy: qcom: phy-qcom-m31: fix wrong pointer pass to PTR_ERR() It should be 'qphy->vreg' passed to PTR_ERR() when devm_regulator_get() fails. Fixes: 08e49af50701 ("phy: qcom: Introduce M31 USB PHY driver") Signed-off-by: Yang Yingliang Reviewed-by: Varadarajan Narayanan Link: https://lore.kernel.org/r/20230824091345.1072650-1-yangyingliang@huawei.com Signed-off-by: Vinod Koul --- drivers/phy/qualcomm/phy-qcom-m31.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/phy') diff --git a/drivers/phy/qualcomm/phy-qcom-m31.c b/drivers/phy/qualcomm/phy-qcom-m31.c index ed08072ca032..99d570f4142a 100644 --- a/drivers/phy/qualcomm/phy-qcom-m31.c +++ b/drivers/phy/qualcomm/phy-qcom-m31.c @@ -256,7 +256,7 @@ static int m31usb_phy_probe(struct platform_device *pdev) qphy->vreg = devm_regulator_get(dev, "vdda-phy"); if (IS_ERR(qphy->vreg)) - return dev_err_probe(dev, PTR_ERR(qphy->phy), + return dev_err_probe(dev, PTR_ERR(qphy->vreg), "failed to get vreg\n"); phy_set_drvdata(qphy->phy, qphy); -- cgit v1.2.3 From 426e05ce126e8febc21fae643139a1072d2670ad Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Thu, 24 Aug 2023 17:23:56 +0800 Subject: phy: qcom: phy-qcom-m31: change m31_ipq5332_regs to static m31_ipq5332_regs is only used in phy-qcom-m31.c now, change it to static. Signed-off-by: Yang Yingliang Reviewed-by: Varadarajan Narayanan Link: https://lore.kernel.org/r/20230824092356.1154839-1-yangyingliang@huawei.com Signed-off-by: Vinod Koul --- drivers/phy/qualcomm/phy-qcom-m31.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/phy') diff --git a/drivers/phy/qualcomm/phy-qcom-m31.c b/drivers/phy/qualcomm/phy-qcom-m31.c index 99d570f4142a..014278e5428c 100644 --- a/drivers/phy/qualcomm/phy-qcom-m31.c +++ b/drivers/phy/qualcomm/phy-qcom-m31.c @@ -82,7 +82,7 @@ struct m31_priv_data { unsigned int nregs; }; -struct m31_phy_regs m31_ipq5332_regs[] = { +static struct m31_phy_regs m31_ipq5332_regs[] = { { USB_PHY_CFG0, UTMI_PHY_OVERRIDE_EN, -- cgit v1.2.3 From 6ee8a9a772b5abd9a9791123ca7aee2dbf126d5f Mon Sep 17 00:00:00 2001 From: Jinjie Ruan Date: Fri, 1 Sep 2023 15:52:31 +0800 Subject: phy: realtek: usb: Drop unnecessary error check for debugfs_create_dir() Both debugfs_create_dir() and debugfs_create_file() return ERR_PTR and never return NULL. As Greg suggested, this patch removes the error checking for debugfs_create_dir in phy-rtk-usb2.c and phy-rtk-usb3.c. This is because the DebugFS kernel API is developed in a way that the caller can safely ignore the errors that occur during the creation of DebugFS nodes. The debugfs APIs have a IS_ERR() judge in start_creating() which can handle it gracefully. So these checks are unnecessary. Fixes: 134e6d25f6bd ("phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY") Fixes: adda6e82a7de ("phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY") Signed-off-by: Jinjie Ruan Suggested-by: Greg Kroah-Hartman Reviewed-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/20230901075231.1368947-1-ruanjinjie@huawei.com Signed-off-by: Vinod Koul --- drivers/phy/realtek/phy-rtk-usb2.c | 10 ++-------- drivers/phy/realtek/phy-rtk-usb3.c | 10 ++-------- 2 files changed, 4 insertions(+), 16 deletions(-) (limited to 'drivers/phy') diff --git a/drivers/phy/realtek/phy-rtk-usb2.c b/drivers/phy/realtek/phy-rtk-usb2.c index 5e7ee060b404..aedc78bd37f7 100644 --- a/drivers/phy/realtek/phy-rtk-usb2.c +++ b/drivers/phy/realtek/phy-rtk-usb2.c @@ -853,17 +853,11 @@ static inline void create_debug_files(struct rtk_phy *rtk_phy) rtk_phy->debug_dir = debugfs_create_dir(dev_name(rtk_phy->dev), phy_debug_root); - if (!rtk_phy->debug_dir) - return; - if (!debugfs_create_file("parameter", 0444, rtk_phy->debug_dir, rtk_phy, - &rtk_usb2_parameter_fops)) - goto file_error; + debugfs_create_file("parameter", 0444, rtk_phy->debug_dir, rtk_phy, + &rtk_usb2_parameter_fops); return; - -file_error: - debugfs_remove_recursive(rtk_phy->debug_dir); } static inline void remove_debug_files(struct rtk_phy *rtk_phy) diff --git a/drivers/phy/realtek/phy-rtk-usb3.c b/drivers/phy/realtek/phy-rtk-usb3.c index 7881f908aade..dfb3122f3f11 100644 --- a/drivers/phy/realtek/phy-rtk-usb3.c +++ b/drivers/phy/realtek/phy-rtk-usb3.c @@ -416,17 +416,11 @@ static inline void create_debug_files(struct rtk_phy *rtk_phy) return; rtk_phy->debug_dir = debugfs_create_dir(dev_name(rtk_phy->dev), phy_debug_root); - if (!rtk_phy->debug_dir) - return; - if (!debugfs_create_file("parameter", 0444, rtk_phy->debug_dir, rtk_phy, - &rtk_usb3_parameter_fops)) - goto file_error; + debugfs_create_file("parameter", 0444, rtk_phy->debug_dir, rtk_phy, + &rtk_usb3_parameter_fops); return; - -file_error: - debugfs_remove_recursive(rtk_phy->debug_dir); } static inline void remove_debug_files(struct rtk_phy *rtk_phy) -- cgit v1.2.3 From ecec1de5c58f8f3ab6959fcf8d68752eeb65311d Mon Sep 17 00:00:00 2001 From: Varadarajan Narayanan Date: Thu, 7 Sep 2023 12:20:52 +0530 Subject: phy: qcom: m31: Remove unwanted qphy->vreg is NULL check Fix the following Smatch complaint: drivers/phy/qualcomm/phy-qcom-m31.c:175 m31usb_phy_init() warn: variable dereferenced before check 'qphy->vreg' (see line 167) drivers/phy/qualcomm/phy-qcom-m31.c 166 167 ret = regulator_enable(qphy->vreg); ^^^^^^^^^^ Unchecked dereference 168 if (ret) { 169 dev_err(&phy->dev, "failed to enable regulator, %d\n", ret); 170 return ret; 171 } 172 173 ret = clk_prepare_enable(qphy->clk); 174 if (ret) { 175 if (qphy->vreg) ^^^^^^^^^^ Checked too late 176 regulator_disable(qphy->vreg); 177 dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret); Since the phy will not get registered if qphy->vreg is NULL, this check is not needed. Reported-by: Dan Carpenter Closes: https://lore.kernel.org/linux-phy/cbd26132-c624-44b7-a073-73222b287338@moroto.mountain/T/#u Fixes: 08e49af50701 ("phy: qcom: Introduce M31 USB PHY driver") Signed-off-by: Varadarajan Narayanan Link: https://lore.kernel.org/r/1694069452-3794-1-git-send-email-quic_varada@quicinc.com Signed-off-by: Vinod Koul --- drivers/phy/qualcomm/phy-qcom-m31.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/phy') diff --git a/drivers/phy/qualcomm/phy-qcom-m31.c b/drivers/phy/qualcomm/phy-qcom-m31.c index 014278e5428c..5cb7e79b99b3 100644 --- a/drivers/phy/qualcomm/phy-qcom-m31.c +++ b/drivers/phy/qualcomm/phy-qcom-m31.c @@ -172,8 +172,7 @@ static int m31usb_phy_init(struct phy *phy) ret = clk_prepare_enable(qphy->clk); if (ret) { - if (qphy->vreg) - regulator_disable(qphy->vreg); + regulator_disable(qphy->vreg); dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret); return ret; } -- cgit v1.2.3 From 112c23705c6dc59a05290c8e3e597e1b4e9c23fc Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Mon, 11 Sep 2023 22:07:14 +0200 Subject: phy: qcom-qmp-combo: Square out 8550 POWER_STATE_CONFIG1 There are two instances of the POWER_STATE_CONFIG1 register: one in the PCS space and another one in PCS_USB. The downstream init sequence pokes the latter one while we've been poking the former one (and misnamed it as the latter one, impostor!). Fix that up to avoid UB. Fixes: 49742e9edab3 ("phy: qcom-qmp-combo: Add support for SM8550") Reviewed-by: Abel Vesa Reviewed-by: Dmitry Baryshkov Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20230829-topic-8550_usbphy-v3-1-34ec434194c5@linaro.org Signed-off-by: Vinod Koul --- drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 2 +- drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/phy') diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c index cbb28afce135..8fd240dd5127 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c @@ -859,10 +859,10 @@ static const struct qmp_phy_init_tbl sm8550_usb3_pcs_tbl[] = { QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_PCS_TX_RX_CONFIG, 0x0c), QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_EQ_CONFIG1, 0x4b), QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_EQ_CONFIG5, 0x10), - QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1, 0x68), }; static const struct qmp_phy_init_tbl sm8550_usb3_pcs_usb_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1, 0x68), QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8), QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07), QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40), diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h index 9510e63ba9d8..c38530d6776b 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h @@ -12,7 +12,7 @@ #define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG3 0xcc #define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG6 0xd8 #define QPHY_USB_V6_PCS_REFGEN_REQ_CONFIG1 0xdc -#define QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1 0x90 +#define QPHY_USB_V6_PCS_POWER_STATE_CONFIG1 0x90 #define QPHY_USB_V6_PCS_RX_SIGDET_LVL 0x188 #define QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_L 0x190 #define QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_H 0x194 @@ -23,6 +23,7 @@ #define QPHY_USB_V6_PCS_EQ_CONFIG1 0x1dc #define QPHY_USB_V6_PCS_EQ_CONFIG5 0x1ec +#define QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1 0x00 #define QPHY_USB_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL 0x18 #define QPHY_USB_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2 0x3c #define QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L 0x40 -- cgit v1.2.3 From 76d20290d0c66a84a7a40c6231e73d1ab25994e5 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Mon, 11 Sep 2023 22:07:15 +0200 Subject: phy: qcom-qmp-combo: initialize PCS_USB registers Currently, PCS_USB registers that have their initialization data in a pcs_usb_tbl table are never initialized. Fix that. Fixes: fc64623637da ("phy: qcom-qmp-combo,usb: add support for separate PCS_USB region") Reported-by: Adrien Thierry Reviewed-by: Dmitry Baryshkov Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20230829-topic-8550_usbphy-v3-2-34ec434194c5@linaro.org Signed-off-by: Vinod Koul --- drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/phy') diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c index 8fd240dd5127..5e6fc8103e9d 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c @@ -2555,6 +2555,7 @@ static int qmp_combo_usb_power_on(struct phy *phy) void __iomem *tx2 = qmp->tx2; void __iomem *rx2 = qmp->rx2; void __iomem *pcs = qmp->pcs; + void __iomem *pcs_usb = qmp->pcs_usb; void __iomem *status; unsigned int val; int ret; @@ -2576,6 +2577,9 @@ static int qmp_combo_usb_power_on(struct phy *phy) qmp_combo_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num); + if (pcs_usb) + qmp_combo_configure(pcs_usb, cfg->pcs_usb_tbl, cfg->pcs_usb_tbl_num); + if (cfg->has_pwrdn_delay) usleep_range(10, 20); -- cgit v1.2.3 From 11395c32f9e9e26f2f6281bd916a1161ba42ee6c Mon Sep 17 00:00:00 2001 From: Bo Liu Date: Tue, 12 Sep 2023 07:46:46 -0400 Subject: phy: qualcomm: Fix typos in comments Fix typo in the description of the 'succesfully'. Signed-off-by: Bo Liu Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20230912114646.8452-1-liubo03@inspur.com Signed-off-by: Vinod Koul --- drivers/phy/qualcomm/phy-qcom-apq8064-sata.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/phy') diff --git a/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c index 8814f4322adf..3642a5d4f2f3 100644 --- a/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c +++ b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c @@ -152,7 +152,7 @@ static int qcom_apq8064_sata_phy_init(struct phy *generic_phy) return ret; } - /* SATA phy calibrated succesfully, power up to functional mode */ + /* SATA phy calibrated successfully, power up to functional mode */ writel_relaxed(0x3E, base + SATA_PHY_POW_DWN_CTRL1); writel_relaxed(0x01, base + SATA_PHY_RX_IMCAL0); writel_relaxed(0x01, base + SATA_PHY_TX_IMCAL0); -- cgit v1.2.3 From 089667aaaa6aa33715d22b21a72216b43af3e896 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 15 Aug 2023 17:28:13 +0200 Subject: phy: realtek: Realtek PHYs should depend on ARCH_REALTEK The Realtek SoC USB2 and USB3 PHY Transceivers are only present on Realtek Digital Home Center (DHC) RTD series SoCs. Hence add a dependency on ARCH_REALTEK, to prevent asking the user about these drivers when configuring a kernel without Realtek SoC support. Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/2892527cac9af6fa8f5e7b8daeffd7d4351fde68.1692113167.git.geert+renesas@glider.be Signed-off-by: Vinod Koul --- drivers/phy/realtek/Kconfig | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/phy') diff --git a/drivers/phy/realtek/Kconfig b/drivers/phy/realtek/Kconfig index 650e20ed69af..75ac7e7c31ae 100644 --- a/drivers/phy/realtek/Kconfig +++ b/drivers/phy/realtek/Kconfig @@ -2,6 +2,9 @@ # # Phy drivers for Realtek platforms # + +if ARCH_REALTEK || COMPILE_TEST + config PHY_RTK_RTD_USB2PHY tristate "Realtek RTD USB2 PHY Transceiver Driver" depends on USB_SUPPORT @@ -25,3 +28,5 @@ config PHY_RTK_RTD_USB3PHY The DHC (digital home center) RTD series SoCs used the Synopsys DWC3 USB IP. This driver will do the PHY initialization of the parameters. + +endif # ARCH_REALTEK || COMPILE_TEST -- cgit v1.2.3