From a9149d243f259ad8f02b1e23dfe8ba06128f15e1 Mon Sep 17 00:00:00 2001 From: Dan Moulding Date: Tue, 28 Jan 2020 02:31:07 -0700 Subject: iwlwifi: mvm: Do not require PHY_SKU NVM section for 3168 devices The logic for checking required NVM sections was recently fixed in commit b3f20e098293 ("iwlwifi: mvm: fix NVM check for 3168 devices"). However, with that fixed the else is now taken for 3168 devices and within the else clause there is a mandatory check for the PHY_SKU section. This causes the parsing to fail for 3168 devices. The PHY_SKU section is really only mandatory for the IWL_NVM_EXT layout (the phy_sku parameter of iwl_parse_nvm_data is only used when the NVM type is IWL_NVM_EXT). So this changes the PHY_SKU section check so that it's only mandatory for IWL_NVM_EXT. Fixes: b3f20e098293 ("iwlwifi: mvm: fix NVM check for 3168 devices") Signed-off-by: Dan Moulding Signed-off-by: Kalle Valo --- drivers/net/wireless/intel/iwlwifi/mvm/nvm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/nvm.c b/drivers/net/wireless/intel/iwlwifi/mvm/nvm.c index 70b29bf16bb9..60296a754af2 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/nvm.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/nvm.c @@ -308,7 +308,8 @@ iwl_parse_nvm_sections(struct iwl_mvm *mvm) } /* PHY_SKU section is mandatory in B0 */ - if (!mvm->nvm_sections[NVM_SECTION_TYPE_PHY_SKU].data) { + if (mvm->trans->cfg->nvm_type == IWL_NVM_EXT && + !mvm->nvm_sections[NVM_SECTION_TYPE_PHY_SKU].data) { IWL_ERR(mvm, "Can't parse phy_sku in B0, empty sections\n"); return NULL; -- cgit v1.2.3 From d64c7a08034b32c285e576208ae44fc3ba3fa7df Mon Sep 17 00:00:00 2001 From: You-Sheng Yang Date: Wed, 26 Feb 2020 23:37:10 +0800 Subject: r8152: check disconnect status after long sleep Dell USB Type C docking WD19/WD19DC attaches additional peripherals as: /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M |__ Port 1: Dev 11, If 0, Class=Hub, Driver=hub/4p, 5000M |__ Port 3: Dev 12, If 0, Class=Hub, Driver=hub/4p, 5000M |__ Port 4: Dev 13, If 0, Class=Vendor Specific Class, Driver=r8152, 5000M where usb 2-1-3 is a hub connecting all USB Type-A/C ports on the dock. When hotplugging such dock with additional usb devices already attached on it, the probing process may reset usb 2.1 port, therefore r8152 ethernet device is also reset. However, during r8152 device init there are several for-loops that, when it's unable to retrieve hardware registers due to being disconnected from USB, may take up to 14 seconds each in practice, and that has to be completed before USB may re-enumerate devices on the bus. As a result, devices attached to the dock will only be available after nearly 1 minute after the dock was plugged in: [ 216.388290] [250] r8152 2-1.4:1.0: usb_probe_interface [ 216.388292] [250] r8152 2-1.4:1.0: usb_probe_interface - got id [ 258.830410] r8152 2-1.4:1.0 (unnamed net_device) (uninitialized): PHY not ready [ 258.830460] r8152 2-1.4:1.0 (unnamed net_device) (uninitialized): Invalid header when reading pass-thru MAC addr [ 258.830464] r8152 2-1.4:1.0 (unnamed net_device) (uninitialized): Get ether addr fail This happens in, for example, r8153_init: static int generic_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data, u16 type) { if (test_bit(RTL8152_UNPLUG, &tp->flags)) return -ENODEV; ... } static u16 ocp_read_word(struct r8152 *tp, u16 type, u16 index) { u32 data; ... generic_ocp_read(tp, index, sizeof(tmp), &tmp, type | byen); data = __le32_to_cpu(tmp); ... return (u16)data; } static void r8153_init(struct r8152 *tp) { ... if (test_bit(RTL8152_UNPLUG, &tp->flags)) return; for (i = 0; i < 500; i++) { if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) & AUTOLOAD_DONE) break; msleep(20); } ... } Since ocp_read_word() doesn't check the return status of generic_ocp_read(), and the only exit condition for the loop is to have a match in the returned value, such loops will only ends after exceeding its maximum runs when the device has been marked as disconnected, which takes 500 * 20ms = 10 seconds in theory, 14 in practice. To solve this long latency another test to RTL8152_UNPLUG flag should be added after those 20ms sleep to skip unnecessary loops, so that the device probe can complete early and proceed to parent port reset/reprobe process. This can be reproduced on all kernel versions up to latest v5.6-rc2, but after v5.5-rc7 the reproduce rate is dramatically lowered to 1/30 or less while it was around 1/2. Signed-off-by: You-Sheng Yang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 78ddbaf6401b..95b19ce96513 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -3221,6 +3221,8 @@ static u16 r8153_phy_status(struct r8152 *tp, u16 desired) } msleep(20); + if (test_bit(RTL8152_UNPLUG, &tp->flags)) + break; } return data; @@ -5402,7 +5404,10 @@ static void r8153_init(struct r8152 *tp) if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) & AUTOLOAD_DONE) break; + msleep(20); + if (test_bit(RTL8152_UNPLUG, &tp->flags)) + break; } data = r8153_phy_status(tp, 0); @@ -5539,7 +5544,10 @@ static void r8153b_init(struct r8152 *tp) if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) & AUTOLOAD_DONE) break; + msleep(20); + if (test_bit(RTL8152_UNPLUG, &tp->flags)) + break; } data = r8153_phy_status(tp, 0); -- cgit v1.2.3 From 0395823b8d9a4d87bd1bf74359123461c2ae801b Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 28 Feb 2020 19:39:41 +0000 Subject: net: dsa: mv88e6xxx: fix lockup on warm boot If the switch is not hardware reset on a warm boot, interrupts can be left enabled, and possibly pending. This will cause us to enter an infinite loop trying to service an interrupt we are unable to handle, thereby preventing the kernel from booting. Ensure that the global 2 interrupt sources are disabled before we claim the parent interrupt. Observed on the ZII development revision B and C platforms with reworked serdes support, and using reboot -f to reboot the platform. Fixes: dc30c35be720 ("net: dsa: mv88e6xxx: Implement interrupt support.") Signed-off-by: Russell King Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/global2.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/dsa/mv88e6xxx/global2.c b/drivers/net/dsa/mv88e6xxx/global2.c index 01503014b1ee..8fd483020c5b 100644 --- a/drivers/net/dsa/mv88e6xxx/global2.c +++ b/drivers/net/dsa/mv88e6xxx/global2.c @@ -1099,6 +1099,13 @@ int mv88e6xxx_g2_irq_setup(struct mv88e6xxx_chip *chip) { int err, irq, virq; + chip->g2_irq.masked = ~0; + mv88e6xxx_reg_lock(chip); + err = mv88e6xxx_g2_int_mask(chip, ~chip->g2_irq.masked); + mv88e6xxx_reg_unlock(chip); + if (err) + return err; + chip->g2_irq.domain = irq_domain_add_simple( chip->dev->of_node, 16, 0, &mv88e6xxx_g2_irq_domain_ops, chip); if (!chip->g2_irq.domain) @@ -1108,7 +1115,6 @@ int mv88e6xxx_g2_irq_setup(struct mv88e6xxx_chip *chip) irq_create_mapping(chip->g2_irq.domain, irq); chip->g2_irq.chip = mv88e6xxx_g2_irq_chip; - chip->g2_irq.masked = ~0; chip->device_irq = irq_find_mapping(chip->g1_irq.domain, MV88E6XXX_G1_STS_IRQ_DEVICE); -- cgit v1.2.3 From 52c0d4e306ca0261a896f5e2ad823112195b7f4b Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Sat, 29 Feb 2020 22:30:07 +0200 Subject: net: dsa: sja1105: Don't destroy not-yet-created xmit_worker Fixes the following NULL pointer dereference on PHY connect error path teardown: [ 2.291010] sja1105 spi0.1: Probed switch chip: SJA1105T [ 2.310044] sja1105 spi0.1: Enabled switch tagging [ 2.314970] fsl-gianfar soc:ethernet@2d90000 eth2: error -19 setting up slave phy [ 2.322463] 8<--- cut here --- [ 2.325497] Unable to handle kernel NULL pointer dereference at virtual address 00000018 [ 2.333555] pgd = (ptrval) [ 2.336241] [00000018] *pgd=00000000 [ 2.339797] Internal error: Oops: 5 [#1] SMP ARM [ 2.344384] Modules linked in: [ 2.347420] CPU: 1 PID: 64 Comm: kworker/1:1 Not tainted 5.5.0-rc5 #1 [ 2.353820] Hardware name: Freescale LS1021A [ 2.358070] Workqueue: events deferred_probe_work_func [ 2.363182] PC is at kthread_destroy_worker+0x4/0x74 [ 2.368117] LR is at sja1105_teardown+0x70/0xb4 [ 2.372617] pc : [] lr : [] psr: 60000013 [ 2.378845] sp : eeac3d30 ip : eeab1900 fp : eef45480 [ 2.384036] r10: eef4549c r9 : 00000001 r8 : 00000000 [ 2.389227] r7 : eef527c0 r6 : 00000034 r5 : ed8ddd0c r4 : ed8ddc40 [ 2.395714] r3 : 00000000 r2 : 00000000 r1 : eef4549c r0 : 00000000 [ 2.402204] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 2.409297] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.415008] Process kworker/1:1 (pid: 64, stack limit = 0x(ptrval)) [ 2.421237] Stack: (0xeeac3d30 to 0xeeac4000) [ 2.612635] [] (kthread_destroy_worker) from [] (sja1105_teardown+0x70/0xb4) [ 2.621379] [] (sja1105_teardown) from [] (dsa_switch_teardown.part.1+0x48/0x74) [ 2.630467] [] (dsa_switch_teardown.part.1) from [] (dsa_register_switch+0x8b0/0xbf4) [ 2.639984] [] (dsa_register_switch) from [] (sja1105_probe+0x2ac/0x464) [ 2.648378] [] (sja1105_probe) from [] (spi_drv_probe+0x7c/0xa0) [ 2.656081] [] (spi_drv_probe) from [] (really_probe+0x208/0x480) [ 2.663871] [] (really_probe) from [] (driver_probe_device+0x78/0x1c4) [ 2.672093] [] (driver_probe_device) from [] (bus_for_each_drv+0x80/0xc4) [ 2.680574] [] (bus_for_each_drv) from [] (__device_attach+0xd0/0x168) [ 2.688794] [] (__device_attach) from [] (bus_probe_device+0x84/0x8c) [ 2.696927] [] (bus_probe_device) from [] (deferred_probe_work_func+0x84/0xc4) [ 2.705842] [] (deferred_probe_work_func) from [] (process_one_work+0x22c/0x560) [ 2.714926] [] (process_one_work) from [] (worker_thread+0x2a8/0x5d4) [ 2.723059] [] (worker_thread) from [] (kthread+0x150/0x154) [ 2.730416] [] (kthread) from [] (ret_from_fork+0x14/0x2c) Checking for NULL pointer is correct because the per-port xmit kernel threads are created in sja1105_probe immediately after calling dsa_register_switch. Fixes: a68578c20a96 ("net: dsa: Make deferred_xmit private to sja1105") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/sja1105/sja1105_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index 03ba6d25f7fe..7edea5741a5f 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -1741,7 +1741,8 @@ static void sja1105_teardown(struct dsa_switch *ds) if (!dsa_is_user_port(ds, port)) continue; - kthread_destroy_worker(sp->xmit_worker); + if (sp->xmit_worker) + kthread_destroy_worker(sp->xmit_worker); } sja1105_tas_teardown(ds); -- cgit v1.2.3 From 249bc9744e165abe74ae326f43e9d70bad54c3b7 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Sun, 1 Mar 2020 21:36:09 +0100 Subject: net: phy: avoid clearing PHY interrupts twice in irq handler On all PHY drivers that implement did_interrupt() reading the interrupt status bits clears them. This means we may loose an interrupt that is triggered between calling did_interrupt() and phy_clear_interrupt(). As part of the fix make it a requirement that did_interrupt() clears the interrupt. The Fixes tag refers to the first commit where the patch applies cleanly. Fixes: 49644e68f472 ("net: phy: add callback for custom interrupt handler to struct phy_driver") Reported-by: Michael Walle Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 3 ++- include/linux/phy.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index d76e038cf2cb..355bfdef48d2 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -727,7 +727,8 @@ static irqreturn_t phy_interrupt(int irq, void *phy_dat) phy_trigger_machine(phydev); } - if (phy_clear_interrupt(phydev)) + /* did_interrupt() may have cleared the interrupt already */ + if (!phydev->drv->did_interrupt && phy_clear_interrupt(phydev)) goto phy_err; return IRQ_HANDLED; diff --git a/include/linux/phy.h b/include/linux/phy.h index c570e162e05e..22f5e763e894 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -557,6 +557,7 @@ struct phy_driver { /* * Checks if the PHY generated an interrupt. * For multi-PHY devices with shared PHY interrupt pin + * Set interrupt bits have to be cleared. */ int (*did_interrupt)(struct phy_device *phydev); -- cgit v1.2.3 From a9b952d267e59a3b405e644930f46d252cea7122 Mon Sep 17 00:00:00 2001 From: Vasundhara Volam Date: Sun, 1 Mar 2020 22:07:17 -0500 Subject: bnxt_en: reinitialize IRQs when MTU is modified MTU changes may affect the number of IRQs so we must call bnxt_close_nic()/bnxt_open_nic() with the irq_re_init parameter set to true. The reason is that a larger MTU may require aggregation rings not needed with smaller MTU. We may not be able to allocate the required number of aggregation rings and so we reduce the number of channels which will change the number of IRQs. Without this patch, it may crash eventually in pci_disable_msix() when the IRQs are not properly unwound. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Vasundhara Volam Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index f9a8151f092c..c5c8effc0139 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -10982,13 +10982,13 @@ static int bnxt_change_mtu(struct net_device *dev, int new_mtu) struct bnxt *bp = netdev_priv(dev); if (netif_running(dev)) - bnxt_close_nic(bp, false, false); + bnxt_close_nic(bp, true, false); dev->mtu = new_mtu; bnxt_set_ring_params(bp); if (netif_running(dev)) - return bnxt_open_nic(bp, false, false); + return bnxt_open_nic(bp, true, false); return 0; } -- cgit v1.2.3 From 22630e28f9c2b55abd217869cc0696def89f2284 Mon Sep 17 00:00:00 2001 From: Edwin Peer Date: Sun, 1 Mar 2020 22:07:18 -0500 Subject: bnxt_en: fix error handling when flashing from file After bnxt_hwrm_do_send_message() was updated to return standard error codes in a recent commit, a regression in bnxt_flash_package_from_file() was introduced. The return value does not properly reflect all possible firmware errors when calling firmware to flash the package. Fix it by consolidating all errors in one local variable rc instead of having 2 variables for different errors. Fixes: d4f1420d3656 ("bnxt_en: Convert error code in firmware message response to standard code.") Signed-off-by: Edwin Peer Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 24 +++++++++++------------ 1 file changed, 11 insertions(+), 13 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c index e8fc1671c581..1f67e6729a2c 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c @@ -2007,8 +2007,8 @@ int bnxt_flash_package_from_file(struct net_device *dev, const char *filename, struct hwrm_nvm_install_update_output *resp = bp->hwrm_cmd_resp_addr; struct hwrm_nvm_install_update_input install = {0}; const struct firmware *fw; - int rc, hwrm_err = 0; u32 item_len; + int rc = 0; u16 index; bnxt_hwrm_fw_set_time(bp); @@ -2052,15 +2052,14 @@ int bnxt_flash_package_from_file(struct net_device *dev, const char *filename, memcpy(kmem, fw->data, fw->size); modify.host_src_addr = cpu_to_le64(dma_handle); - hwrm_err = hwrm_send_message(bp, &modify, - sizeof(modify), - FLASH_PACKAGE_TIMEOUT); + rc = hwrm_send_message(bp, &modify, sizeof(modify), + FLASH_PACKAGE_TIMEOUT); dma_free_coherent(&bp->pdev->dev, fw->size, kmem, dma_handle); } } release_firmware(fw); - if (rc || hwrm_err) + if (rc) goto err_exit; if ((install_type & 0xffff) == 0) @@ -2069,20 +2068,19 @@ int bnxt_flash_package_from_file(struct net_device *dev, const char *filename, install.install_type = cpu_to_le32(install_type); mutex_lock(&bp->hwrm_cmd_lock); - hwrm_err = _hwrm_send_message(bp, &install, sizeof(install), - INSTALL_PACKAGE_TIMEOUT); - if (hwrm_err) { + rc = _hwrm_send_message(bp, &install, sizeof(install), + INSTALL_PACKAGE_TIMEOUT); + if (rc) { u8 error_code = ((struct hwrm_err_output *)resp)->cmd_err; if (resp->error_code && error_code == NVM_INSTALL_UPDATE_CMD_ERR_CODE_FRAG_ERR) { install.flags |= cpu_to_le16( NVM_INSTALL_UPDATE_REQ_FLAGS_ALLOWED_TO_DEFRAG); - hwrm_err = _hwrm_send_message(bp, &install, - sizeof(install), - INSTALL_PACKAGE_TIMEOUT); + rc = _hwrm_send_message(bp, &install, sizeof(install), + INSTALL_PACKAGE_TIMEOUT); } - if (hwrm_err) + if (rc) goto flash_pkg_exit; } @@ -2094,7 +2092,7 @@ int bnxt_flash_package_from_file(struct net_device *dev, const char *filename, flash_pkg_exit: mutex_unlock(&bp->hwrm_cmd_lock); err_exit: - if (hwrm_err == -EACCES) + if (rc == -EACCES) bnxt_print_admin_err(bp); return rc; } -- cgit v1.2.3 From b102f0c522cf668c8382c56a4f771b37d011cda2 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 20 Feb 2020 12:41:39 +0100 Subject: mt76: fix array overflow on receiving too many fragments for a packet If the hardware receives an oversized packet with too many rx fragments, skb_shinfo(skb)->frags can overflow and corrupt memory of adjacent pages. This becomes especially visible if it corrupts the freelist pointer of a slab page. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: Kalle Valo --- drivers/net/wireless/mediatek/mt76/dma.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mediatek/mt76/dma.c b/drivers/net/wireless/mediatek/mt76/dma.c index 6173c80189ba..1847f55e199b 100644 --- a/drivers/net/wireless/mediatek/mt76/dma.c +++ b/drivers/net/wireless/mediatek/mt76/dma.c @@ -447,10 +447,13 @@ mt76_add_fragment(struct mt76_dev *dev, struct mt76_queue *q, void *data, struct page *page = virt_to_head_page(data); int offset = data - page_address(page); struct sk_buff *skb = q->rx_head; + struct skb_shared_info *shinfo = skb_shinfo(skb); - offset += q->buf_offset; - skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, offset, len, - q->buf_size); + if (shinfo->nr_frags < ARRAY_SIZE(shinfo->frags)) { + offset += q->buf_offset; + skb_add_rx_frag(skb, shinfo->nr_frags, page, offset, len, + q->buf_size); + } if (more) return; -- cgit v1.2.3 From ab02ad660586b94f5d08912a3952b939cf4c4430 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Mon, 2 Mar 2020 21:05:16 -0800 Subject: can: add missing attribute validation for termination Add missing attribute validation for IFLA_CAN_TERMINATION to the netlink policy. Fixes: 12a6075cabc0 ("can: dev: add CAN interface termination API") Signed-off-by: Jakub Kicinski Acked-by: Oliver Hartkopp Signed-off-by: David S. Miller --- drivers/net/can/dev.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 6ee06a49fb4c..68834a2853c9 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -883,6 +883,7 @@ static const struct nla_policy can_policy[IFLA_CAN_MAX + 1] = { = { .len = sizeof(struct can_bittiming) }, [IFLA_CAN_DATA_BITTIMING_CONST] = { .len = sizeof(struct can_bittiming_const) }, + [IFLA_CAN_TERMINATION] = { .type = NLA_U16 }, }; static int can_validate(struct nlattr *tb[], struct nlattr *data[], -- cgit v1.2.3 From 31d9a1c524964bac77b7f9d0a1ac140dc6b57461 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Mon, 2 Mar 2020 21:05:17 -0800 Subject: macsec: add missing attribute validation for port Add missing attribute validation for IFLA_MACSEC_PORT to the netlink policy. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/macsec.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index 45bfd99f17fa..5af424eeea86 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -3342,6 +3342,7 @@ static const struct device_type macsec_type = { static const struct nla_policy macsec_rtnl_policy[IFLA_MACSEC_MAX + 1] = { [IFLA_MACSEC_SCI] = { .type = NLA_U64 }, + [IFLA_MACSEC_PORT] = { .type = NLA_U16 }, [IFLA_MACSEC_ICV_LEN] = { .type = NLA_U8 }, [IFLA_MACSEC_CIPHER_SUITE] = { .type = NLA_U64 }, [IFLA_MACSEC_WINDOW] = { .type = NLA_U32 }, -- cgit v1.2.3 From dd25cb272ccce4db67dc8509278229099e4f5e99 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Mon, 2 Mar 2020 21:05:21 -0800 Subject: team: add missing attribute validation for port ifindex Add missing attribute validation for TEAM_ATTR_OPTION_PORT_IFINDEX to the netlink policy. Fixes: 80f7c6683fe0 ("team: add support for per-port options") Signed-off-by: Jakub Kicinski Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/team/team.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index ca70a1d840eb..44dd26a62a6d 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -2240,6 +2240,7 @@ team_nl_option_policy[TEAM_ATTR_OPTION_MAX + 1] = { [TEAM_ATTR_OPTION_CHANGED] = { .type = NLA_FLAG }, [TEAM_ATTR_OPTION_TYPE] = { .type = NLA_U8 }, [TEAM_ATTR_OPTION_DATA] = { .type = NLA_BINARY }, + [TEAM_ATTR_OPTION_PORT_IFINDEX] = { .type = NLA_U32 }, }; static int team_nl_cmd_noop(struct sk_buff *skb, struct genl_info *info) -- cgit v1.2.3 From 669fcd7795900cd1880237cbbb57a7db66cb9ac8 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Mon, 2 Mar 2020 21:05:22 -0800 Subject: team: add missing attribute validation for array index Add missing attribute validation for TEAM_ATTR_OPTION_ARRAY_INDEX to the netlink policy. Fixes: b13033262d24 ("team: introduce array options") Signed-off-by: Jakub Kicinski Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/team/team.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 44dd26a62a6d..4004f98e50d9 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -2241,6 +2241,7 @@ team_nl_option_policy[TEAM_ATTR_OPTION_MAX + 1] = { [TEAM_ATTR_OPTION_TYPE] = { .type = NLA_U8 }, [TEAM_ATTR_OPTION_DATA] = { .type = NLA_BINARY }, [TEAM_ATTR_OPTION_PORT_IFINDEX] = { .type = NLA_U32 }, + [TEAM_ATTR_OPTION_ARRAY_INDEX] = { .type = NLA_U32 }, }; static int team_nl_cmd_noop(struct sk_buff *skb, struct genl_info *info) -- cgit v1.2.3 From 43de81b0601df7d7988d3f5617ee0987df65c883 Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Mon, 2 Mar 2020 20:46:57 +0100 Subject: net: phy: bcm63xx: fix OOPS due to missing driver name 719655a14971 ("net: phy: Replace phy driver features u32 with link_mode bitmap") was a bit over-eager and also removed the second phy driver's name, resulting in a nasty OOPS on registration: [ 1.319854] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 804dd50c, ra == 804dd4f0 [ 1.330859] Oops[#1]: [ 1.333138] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.4.22 #0 [ 1.339217] $ 0 : 00000000 00000001 87ca7f00 805c1874 [ 1.344590] $ 4 : 00000000 00000047 00585000 8701f800 [ 1.349965] $ 8 : 8701f800 804f4a5c 00000003 64726976 [ 1.355341] $12 : 00000001 00000000 00000000 00000114 [ 1.360718] $16 : 87ca7f80 00000000 00000000 80639fe4 [ 1.366093] $20 : 00000002 00000000 806441d0 80b90000 [ 1.371470] $24 : 00000000 00000000 [ 1.376847] $28 : 87c1e000 87c1fda0 80b90000 804dd4f0 [ 1.382224] Hi : d1c8f8da [ 1.385180] Lo : 5518a480 [ 1.388182] epc : 804dd50c kset_find_obj+0x3c/0x114 [ 1.393345] ra : 804dd4f0 kset_find_obj+0x20/0x114 [ 1.398530] Status: 10008703 KERNEL EXL IE [ 1.402833] Cause : 00800008 (ExcCode 02) [ 1.406952] BadVA : 00000000 [ 1.409913] PrId : 0002a075 (Broadcom BMIPS4350) [ 1.414745] Modules linked in: [ 1.417895] Process swapper/0 (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) [ 1.426214] Stack : 87cec000 80630000 80639370 80640658 80640000 80049af4 80639fe4 8063a0d8 [ 1.434816] 8063a0d8 802ef078 00000002 00000000 806441d0 80b90000 8063a0d8 802ef114 [ 1.443417] 87cea0de 87c1fde0 00000000 804de488 87cea000 8063a0d8 8063a0d8 80334e48 [ 1.452018] 80640000 8063984c 80639bf4 00000000 8065de48 00000001 8063a0d8 80334ed0 [ 1.460620] 806441d0 80b90000 80b90000 802ef164 8065dd70 80620000 80b90000 8065de58 [ 1.469222] ... [ 1.471734] Call Trace: [ 1.474255] [<804dd50c>] kset_find_obj+0x3c/0x114 [ 1.479141] [<802ef078>] driver_find+0x1c/0x44 [ 1.483665] [<802ef114>] driver_register+0x74/0x148 [ 1.488719] [<80334e48>] phy_driver_register+0x9c/0xd0 [ 1.493968] [<80334ed0>] phy_drivers_register+0x54/0xe8 [ 1.499345] [<8001061c>] do_one_initcall+0x7c/0x1f4 [ 1.504374] [<80644ed8>] kernel_init_freeable+0x1d4/0x2b4 [ 1.509940] [<804f4e24>] kernel_init+0x10/0xf8 [ 1.514502] [<80018e68>] ret_from_kernel_thread+0x14/0x1c [ 1.520040] Code: 1060000c 02202025 90650000 <90810000> 24630001 14250004 24840001 14a0fffb 90650000 [ 1.530061] [ 1.531698] ---[ end trace d52f1717cd29bdc8 ]--- Fix it by readding the name. Fixes: 719655a14971 ("net: phy: Replace phy driver features u32 with link_mode bitmap") Signed-off-by: Jonas Gorski Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/bcm63xx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/phy/bcm63xx.c b/drivers/net/phy/bcm63xx.c index 23f1958ba6ad..459fb2069c7e 100644 --- a/drivers/net/phy/bcm63xx.c +++ b/drivers/net/phy/bcm63xx.c @@ -73,6 +73,7 @@ static struct phy_driver bcm63xx_driver[] = { /* same phy as above, with just a different OUI */ .phy_id = 0x002bdc00, .phy_id_mask = 0xfffffc00, + .name = "Broadcom BCM63XX (2)", /* PHY_BASIC_FEATURES */ .flags = PHY_IS_INTERNAL, .config_init = bcm63xx_config_init, -- cgit v1.2.3 From 20d8bb0d172d87dcc52727cb7174ae9994de8978 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Mon, 2 Mar 2020 00:55:02 +0100 Subject: phylink: Improve error message when validate failed This should improve the error message when the PHY validate in the MAC driver failed. I ran into this problem multiple times that I put wrong interface values into the device tree and was searching why it is failing with -22 (-EINVAL). This should make it easier to spot the problem. Signed-off-by: Hauke Mehrtens Acked-by: Russell King Signed-off-by: David S. Miller --- drivers/net/phy/phylink.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 70b9a143db84..6e66b8e77ec7 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -761,8 +761,14 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy, config.interface = interface; ret = phylink_validate(pl, supported, &config); - if (ret) + if (ret) { + phylink_warn(pl, "validation of %s with support %*pb and advertisement %*pb failed: %d\n", + phy_modes(config.interface), + __ETHTOOL_LINK_MODE_MASK_NBITS, phy->supported, + __ETHTOOL_LINK_MODE_MASK_NBITS, config.advertising, + ret); return ret; + } phy->phylink = pl; phy->phy_link_change = phylink_phy_change; -- cgit v1.2.3 From 116ca924aea664141afa86a1425edc3fcda0d06f Mon Sep 17 00:00:00 2001 From: Vishal Kulkarni Date: Mon, 2 Mar 2020 10:54:13 +0530 Subject: cxgb4: fix checks for max queues to allocate Hardware can support more than 8 queues currently limited by netif_get_num_default_rss_queues(). So, rework and fix checks for max number of queues to allocate. The checks should be based on how many are actually supported by hardware, OR the number of online cpus; whichever is lower. Fixes: 5952dde72307 ("cxgb4: set maximal number of default RSS queues") Signed-off-by: Vishal Kulkarni " Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 49 ++++++++++++++----------- 1 file changed, 27 insertions(+), 22 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index 649842a8aa28..97f90edbc068 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -5381,12 +5381,11 @@ static inline bool is_x_10g_port(const struct link_config *lc) static int cfg_queues(struct adapter *adap) { u32 avail_qsets, avail_eth_qsets, avail_uld_qsets; + u32 i, n10g = 0, qidx = 0, n1g = 0; + u32 ncpus = num_online_cpus(); u32 niqflint, neq, num_ulds; struct sge *s = &adap->sge; - u32 i, n10g = 0, qidx = 0; -#ifndef CONFIG_CHELSIO_T4_DCB - int q10g = 0; -#endif + u32 q10g = 0, q1g; /* Reduce memory usage in kdump environment, disable all offload. */ if (is_kdump_kernel() || (is_uld(adap) && t4_uld_mem_alloc(adap))) { @@ -5424,44 +5423,50 @@ static int cfg_queues(struct adapter *adap) n10g += is_x_10g_port(&adap2pinfo(adap, i)->link_cfg); avail_eth_qsets = min_t(u32, avail_qsets, MAX_ETH_QSETS); + + /* We default to 1 queue per non-10G port and up to # of cores queues + * per 10G port. + */ + if (n10g) + q10g = (avail_eth_qsets - (adap->params.nports - n10g)) / n10g; + + n1g = adap->params.nports - n10g; #ifdef CONFIG_CHELSIO_T4_DCB /* For Data Center Bridging support we need to be able to support up * to 8 Traffic Priorities; each of which will be assigned to its * own TX Queue in order to prevent Head-Of-Line Blocking. */ + q1g = 8; if (adap->params.nports * 8 > avail_eth_qsets) { dev_err(adap->pdev_dev, "DCB avail_eth_qsets=%d < %d!\n", avail_eth_qsets, adap->params.nports * 8); return -ENOMEM; } - for_each_port(adap, i) { - struct port_info *pi = adap2pinfo(adap, i); + if (adap->params.nports * ncpus < avail_eth_qsets) + q10g = max(8U, ncpus); + else + q10g = max(8U, q10g); - pi->first_qset = qidx; - pi->nqsets = is_kdump_kernel() ? 1 : 8; - qidx += pi->nqsets; - } -#else /* !CONFIG_CHELSIO_T4_DCB */ - /* We default to 1 queue per non-10G port and up to # of cores queues - * per 10G port. - */ - if (n10g) - q10g = (avail_eth_qsets - (adap->params.nports - n10g)) / n10g; - if (q10g > netif_get_num_default_rss_queues()) - q10g = netif_get_num_default_rss_queues(); + while ((q10g * n10g) > (avail_eth_qsets - n1g * q1g)) + q10g--; - if (is_kdump_kernel()) +#else /* !CONFIG_CHELSIO_T4_DCB */ + q1g = 1; + q10g = min(q10g, ncpus); +#endif /* !CONFIG_CHELSIO_T4_DCB */ + if (is_kdump_kernel()) { q10g = 1; + q1g = 1; + } for_each_port(adap, i) { struct port_info *pi = adap2pinfo(adap, i); pi->first_qset = qidx; - pi->nqsets = is_x_10g_port(&pi->link_cfg) ? q10g : 1; + pi->nqsets = is_x_10g_port(&pi->link_cfg) ? q10g : q1g; qidx += pi->nqsets; } -#endif /* !CONFIG_CHELSIO_T4_DCB */ s->ethqsets = qidx; s->max_ethqsets = qidx; /* MSI-X may lower it later */ @@ -5473,7 +5478,7 @@ static int cfg_queues(struct adapter *adap) * capped by the number of available cores. */ num_ulds = adap->num_uld + adap->num_ofld_uld; - i = min_t(u32, MAX_OFLD_QSETS, num_online_cpus()); + i = min_t(u32, MAX_OFLD_QSETS, ncpus); avail_uld_qsets = roundup(i, adap->params.nports); if (avail_qsets < num_ulds * adap->params.nports) { adap->params.offload = 0; -- cgit v1.2.3 From 110a40dfb708fe940a3f3704d470e431c368d256 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 4 Mar 2020 15:51:43 -0800 Subject: slip: make slhc_compress() more robust against malicious packets Before accessing various fields in IPV4 network header and TCP header, make sure the packet : - Has IP version 4 (ip->version == 4) - Has not a silly network length (ip->ihl >= 5) - Is big enough to hold network and transport headers - Has not a silly TCP header size (th->doff >= sizeof(struct tcphdr) / 4) syzbot reported : BUG: KMSAN: uninit-value in slhc_compress+0x5b9/0x2e60 drivers/net/slip/slhc.c:270 CPU: 0 PID: 11728 Comm: syz-executor231 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 slhc_compress+0x5b9/0x2e60 drivers/net/slip/slhc.c:270 ppp_send_frame drivers/net/ppp/ppp_generic.c:1637 [inline] __ppp_xmit_process+0x1902/0x2970 drivers/net/ppp/ppp_generic.c:1495 ppp_xmit_process+0x147/0x2f0 drivers/net/ppp/ppp_generic.c:1516 ppp_write+0x6bb/0x790 drivers/net/ppp/ppp_generic.c:512 do_loop_readv_writev fs/read_write.c:717 [inline] do_iter_write+0x812/0xdc0 fs/read_write.c:1000 compat_writev+0x2df/0x5a0 fs/read_write.c:1351 do_compat_pwritev64 fs/read_write.c:1400 [inline] __do_compat_sys_pwritev fs/read_write.c:1420 [inline] __se_compat_sys_pwritev fs/read_write.c:1414 [inline] __ia32_compat_sys_pwritev+0x349/0x3f0 fs/read_write.c:1414 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline] do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7f7cd99 Code: 90 e8 0b 00 00 00 f3 90 0f ae e8 eb f9 8d 74 26 00 89 3c 24 c3 90 90 90 90 90 90 90 90 90 90 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 002b:00000000ffdb84ac EFLAGS: 00000217 ORIG_RAX: 000000000000014e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00000000200001c0 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000040047459 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82 slab_alloc_node mm/slub.c:2793 [inline] __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4401 __kmalloc_reserve net/core/skbuff.c:142 [inline] __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:210 alloc_skb include/linux/skbuff.h:1051 [inline] ppp_write+0x115/0x790 drivers/net/ppp/ppp_generic.c:500 do_loop_readv_writev fs/read_write.c:717 [inline] do_iter_write+0x812/0xdc0 fs/read_write.c:1000 compat_writev+0x2df/0x5a0 fs/read_write.c:1351 do_compat_pwritev64 fs/read_write.c:1400 [inline] __do_compat_sys_pwritev fs/read_write.c:1420 [inline] __se_compat_sys_pwritev fs/read_write.c:1414 [inline] __ia32_compat_sys_pwritev+0x349/0x3f0 fs/read_write.c:1414 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline] do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139 Fixes: b5451d783ade ("slip: Move the SLIP drivers") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller --- drivers/net/slip/slhc.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/slip/slhc.c b/drivers/net/slip/slhc.c index 58a69f830d29..f78ceba42e57 100644 --- a/drivers/net/slip/slhc.c +++ b/drivers/net/slip/slhc.c @@ -232,7 +232,7 @@ slhc_compress(struct slcompress *comp, unsigned char *icp, int isize, struct cstate *cs = lcs->next; unsigned long deltaS, deltaA; short changes = 0; - int hlen; + int nlen, hlen; unsigned char new_seq[16]; unsigned char *cp = new_seq; struct iphdr *ip; @@ -248,6 +248,8 @@ slhc_compress(struct slcompress *comp, unsigned char *icp, int isize, return isize; ip = (struct iphdr *) icp; + if (ip->version != 4 || ip->ihl < 5) + return isize; /* Bail if this packet isn't TCP, or is an IP fragment */ if (ip->protocol != IPPROTO_TCP || (ntohs(ip->frag_off) & 0x3fff)) { @@ -258,10 +260,14 @@ slhc_compress(struct slcompress *comp, unsigned char *icp, int isize, comp->sls_o_tcp++; return isize; } - /* Extract TCP header */ + nlen = ip->ihl * 4; + if (isize < nlen + sizeof(*th)) + return isize; - th = (struct tcphdr *)(((unsigned char *)ip) + ip->ihl*4); - hlen = ip->ihl*4 + th->doff*4; + th = (struct tcphdr *)(icp + nlen); + if (th->doff < sizeof(struct tcphdr) / 4) + return isize; + hlen = nlen + th->doff * 4; /* Bail if the TCP packet isn't `compressible' (i.e., ACK isn't set or * some other control bit is set). Also uncompressible if -- cgit v1.2.3 From 68e1006f618e509fc7869259fe83ceec4a95dac3 Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Thu, 5 Mar 2020 09:47:53 +0800 Subject: net: hns3: fix a not link up issue when fibre port supports autoneg When fibre port supports auto-negotiation, the IMP(Intelligent Management Process) processes the speed of auto-negotiation and the user's speed separately. For below case, the port will get a not link up problem. step 1: disables auto-negotiation and sets speed to A, then the driver's MAC speed will be updated to A. step 2: enables auto-negotiation and MAC gets negotiated speed B, then the driver's MAC speed will be updated to B through querying in periodical task. step 3: MAC gets new negotiated speed A. step 4: disables auto-negotiation and sets speed to B before periodical task query new MAC speed A, the driver will ignore the speed configuration. This patch fixes it by skipping speed and duplex checking when fibre port supports auto-negotiation. Fixes: 22f48e24a23d ("net: hns3: add autoneg and change speed support for fibre port") Signed-off-by: Jian Shen Signed-off-by: Huazhong Tan Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 492bc9446463..acf0c29fcbcd 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -2446,10 +2446,12 @@ static int hclge_cfg_mac_speed_dup_hw(struct hclge_dev *hdev, int speed, int hclge_cfg_mac_speed_dup(struct hclge_dev *hdev, int speed, u8 duplex) { + struct hclge_mac *mac = &hdev->hw.mac; int ret; duplex = hclge_check_speed_dup(duplex, speed); - if (hdev->hw.mac.speed == speed && hdev->hw.mac.duplex == duplex) + if (!mac->support_autoneg && mac->speed == speed && + mac->duplex == duplex) return 0; ret = hclge_cfg_mac_speed_dup_hw(hdev, speed, duplex); -- cgit v1.2.3 From 3b4f06c715d0d3ecd6497275e3c85fe91462d0ee Mon Sep 17 00:00:00 2001 From: Tom Zhao Date: Thu, 5 Mar 2020 11:38:45 +0000 Subject: sfc: complete the next packet when we receive a timestamp We now ignore the "completion" event when using tx queue timestamping, and only pay attention to the two (high and low) timestamp events. The NIC will send a pair of timestamp events for every packet transmitted. The current firmware may merge the completion events, and it is possible that future versions may reorder the completion and timestamp events. As such the completion event is not useful. Without this patch in place a merged completion event on a queue with timestamping will cause a "spurious TX completion" error. This affects SFN8000-series adapters. Signed-off-by: Tom Zhao Acked-by: Martin Habets Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/ef10.c | 32 +++++++++++++++-------------- drivers/net/ethernet/sfc/efx.h | 1 + drivers/net/ethernet/sfc/net_driver.h | 3 --- drivers/net/ethernet/sfc/tx.c | 38 +++++++++++++++++++++++++++++++++++ drivers/net/ethernet/sfc/tx_common.c | 29 ++++++++++++++------------ drivers/net/ethernet/sfc/tx_common.h | 6 ++++++ 6 files changed, 78 insertions(+), 31 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c index 52113b7529d6..3f16bd807c6e 100644 --- a/drivers/net/ethernet/sfc/ef10.c +++ b/drivers/net/ethernet/sfc/ef10.c @@ -2853,11 +2853,24 @@ efx_ef10_handle_tx_event(struct efx_channel *channel, efx_qword_t *event) } /* Transmit timestamps are only available for 8XXX series. They result - * in three events per packet. These occur in order, and are: - * - the normal completion event + * in up to three events per packet. These occur in order, and are: + * - the normal completion event (may be omitted) * - the low part of the timestamp * - the high part of the timestamp * + * It's possible for multiple completion events to appear before the + * corresponding timestamps. So we can for example get: + * COMP N + * COMP N+1 + * TS_LO N + * TS_HI N + * TS_LO N+1 + * TS_HI N+1 + * + * In addition it's also possible for the adjacent completions to be + * merged, so we may not see COMP N above. As such, the completion + * events are not very useful here. + * * Each part of the timestamp is itself split across two 16 bit * fields in the event. */ @@ -2865,17 +2878,7 @@ efx_ef10_handle_tx_event(struct efx_channel *channel, efx_qword_t *event) switch (tx_ev_type) { case TX_TIMESTAMP_EVENT_TX_EV_COMPLETION: - /* In case of Queue flush or FLR, we might have received - * the previous TX completion event but not the Timestamp - * events. - */ - if (tx_queue->completed_desc_ptr != tx_queue->ptr_mask) - efx_xmit_done(tx_queue, tx_queue->completed_desc_ptr); - - tx_ev_desc_ptr = EFX_QWORD_FIELD(*event, - ESF_DZ_TX_DESCR_INDX); - tx_queue->completed_desc_ptr = - tx_ev_desc_ptr & tx_queue->ptr_mask; + /* Ignore this event - see above. */ break; case TX_TIMESTAMP_EVENT_TX_EV_TSTAMP_LO: @@ -2887,8 +2890,7 @@ efx_ef10_handle_tx_event(struct efx_channel *channel, efx_qword_t *event) ts_part = efx_ef10_extract_event_ts(event); tx_queue->completed_timestamp_major = ts_part; - efx_xmit_done(tx_queue, tx_queue->completed_desc_ptr); - tx_queue->completed_desc_ptr = tx_queue->ptr_mask; + efx_xmit_done_single(tx_queue); break; default: diff --git a/drivers/net/ethernet/sfc/efx.h b/drivers/net/ethernet/sfc/efx.h index f1bdb04efbe4..95395d67ea2d 100644 --- a/drivers/net/ethernet/sfc/efx.h +++ b/drivers/net/ethernet/sfc/efx.h @@ -20,6 +20,7 @@ netdev_tx_t efx_hard_start_xmit(struct sk_buff *skb, struct net_device *net_dev); netdev_tx_t efx_enqueue_skb(struct efx_tx_queue *tx_queue, struct sk_buff *skb); void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index); +void efx_xmit_done_single(struct efx_tx_queue *tx_queue); int efx_setup_tc(struct net_device *net_dev, enum tc_setup_type type, void *type_data); extern unsigned int efx_piobuf_size; diff --git a/drivers/net/ethernet/sfc/net_driver.h b/drivers/net/ethernet/sfc/net_driver.h index 9f9886f222c8..8164f0edcbf0 100644 --- a/drivers/net/ethernet/sfc/net_driver.h +++ b/drivers/net/ethernet/sfc/net_driver.h @@ -208,8 +208,6 @@ struct efx_tx_buffer { * avoid cache-line ping-pong between the xmit path and the * completion path. * @merge_events: Number of TX merged completion events - * @completed_desc_ptr: Most recent completed pointer - only used with - * timestamping. * @completed_timestamp_major: Top part of the most recent tx timestamp. * @completed_timestamp_minor: Low part of the most recent tx timestamp. * @insert_count: Current insert pointer @@ -269,7 +267,6 @@ struct efx_tx_queue { unsigned int merge_events; unsigned int bytes_compl; unsigned int pkts_compl; - unsigned int completed_desc_ptr; u32 completed_timestamp_major; u32 completed_timestamp_minor; diff --git a/drivers/net/ethernet/sfc/tx.c b/drivers/net/ethernet/sfc/tx.c index 04d7f41d7ed9..8aafc54a4684 100644 --- a/drivers/net/ethernet/sfc/tx.c +++ b/drivers/net/ethernet/sfc/tx.c @@ -535,6 +535,44 @@ netdev_tx_t efx_hard_start_xmit(struct sk_buff *skb, return efx_enqueue_skb(tx_queue, skb); } +void efx_xmit_done_single(struct efx_tx_queue *tx_queue) +{ + unsigned int pkts_compl = 0, bytes_compl = 0; + unsigned int read_ptr; + bool finished = false; + + read_ptr = tx_queue->read_count & tx_queue->ptr_mask; + + while (!finished) { + struct efx_tx_buffer *buffer = &tx_queue->buffer[read_ptr]; + + if (!efx_tx_buffer_in_use(buffer)) { + struct efx_nic *efx = tx_queue->efx; + + netif_err(efx, hw, efx->net_dev, + "TX queue %d spurious single TX completion\n", + tx_queue->queue); + efx_schedule_reset(efx, RESET_TYPE_TX_SKIP); + return; + } + + /* Need to check the flag before dequeueing. */ + if (buffer->flags & EFX_TX_BUF_SKB) + finished = true; + efx_dequeue_buffer(tx_queue, buffer, &pkts_compl, &bytes_compl); + + ++tx_queue->read_count; + read_ptr = tx_queue->read_count & tx_queue->ptr_mask; + } + + tx_queue->pkts_compl += pkts_compl; + tx_queue->bytes_compl += bytes_compl; + + EFX_WARN_ON_PARANOID(pkts_compl != 1); + + efx_xmit_done_check_empty(tx_queue); +} + void efx_init_tx_queue_core_txq(struct efx_tx_queue *tx_queue) { struct efx_nic *efx = tx_queue->efx; diff --git a/drivers/net/ethernet/sfc/tx_common.c b/drivers/net/ethernet/sfc/tx_common.c index b1571e9789d0..70876df1da69 100644 --- a/drivers/net/ethernet/sfc/tx_common.c +++ b/drivers/net/ethernet/sfc/tx_common.c @@ -80,7 +80,6 @@ void efx_init_tx_queue(struct efx_tx_queue *tx_queue) tx_queue->xmit_more_available = false; tx_queue->timestamping = (efx_ptp_use_mac_tx_timestamps(efx) && tx_queue->channel == efx_ptp_channel(efx)); - tx_queue->completed_desc_ptr = tx_queue->ptr_mask; tx_queue->completed_timestamp_major = 0; tx_queue->completed_timestamp_minor = 0; @@ -210,10 +209,9 @@ static void efx_dequeue_buffers(struct efx_tx_queue *tx_queue, while (read_ptr != stop_index) { struct efx_tx_buffer *buffer = &tx_queue->buffer[read_ptr]; - if (!(buffer->flags & EFX_TX_BUF_OPTION) && - unlikely(buffer->len == 0)) { + if (!efx_tx_buffer_in_use(buffer)) { netif_err(efx, tx_err, efx->net_dev, - "TX queue %d spurious TX completion id %x\n", + "TX queue %d spurious TX completion id %d\n", tx_queue->queue, read_ptr); efx_schedule_reset(efx, RESET_TYPE_TX_SKIP); return; @@ -226,6 +224,19 @@ static void efx_dequeue_buffers(struct efx_tx_queue *tx_queue, } } +void efx_xmit_done_check_empty(struct efx_tx_queue *tx_queue) +{ + if ((int)(tx_queue->read_count - tx_queue->old_write_count) >= 0) { + tx_queue->old_write_count = READ_ONCE(tx_queue->write_count); + if (tx_queue->read_count == tx_queue->old_write_count) { + /* Ensure that read_count is flushed. */ + smp_mb(); + tx_queue->empty_read_count = + tx_queue->read_count | EFX_EMPTY_COUNT_VALID; + } + } +} + void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index) { unsigned int fill_level, pkts_compl = 0, bytes_compl = 0; @@ -256,15 +267,7 @@ void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index) netif_tx_wake_queue(tx_queue->core_txq); } - /* Check whether the hardware queue is now empty */ - if ((int)(tx_queue->read_count - tx_queue->old_write_count) >= 0) { - tx_queue->old_write_count = READ_ONCE(tx_queue->write_count); - if (tx_queue->read_count == tx_queue->old_write_count) { - smp_mb(); - tx_queue->empty_read_count = - tx_queue->read_count | EFX_EMPTY_COUNT_VALID; - } - } + efx_xmit_done_check_empty(tx_queue); } /* Remove buffers put into a tx_queue for the current packet. diff --git a/drivers/net/ethernet/sfc/tx_common.h b/drivers/net/ethernet/sfc/tx_common.h index f92f1fe3a87f..99cf7ce2f36c 100644 --- a/drivers/net/ethernet/sfc/tx_common.h +++ b/drivers/net/ethernet/sfc/tx_common.h @@ -21,6 +21,12 @@ void efx_dequeue_buffer(struct efx_tx_queue *tx_queue, unsigned int *pkts_compl, unsigned int *bytes_compl); +static inline bool efx_tx_buffer_in_use(struct efx_tx_buffer *buffer) +{ + return buffer->len || (buffer->flags & EFX_TX_BUF_OPTION); +} + +void efx_xmit_done_check_empty(struct efx_tx_queue *tx_queue); void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index); void efx_enqueue_unwind(struct efx_tx_queue *tx_queue, -- cgit v1.2.3 From e25d5dbcffae62c9a7fa03517dfa4b8e67670e3d Mon Sep 17 00:00:00 2001 From: Jiang Lidong Date: Wed, 4 Mar 2020 09:49:29 +0800 Subject: veth: ignore peer tx_dropped when counting local rx_dropped When local NET_RX backlog is full due to traffic overrun, peer veth tx_dropped counter increases. At that time, list local veth stats, rx_dropped has double value of peer tx_dropped, even bigger than transmit packets by peer. In NET_RX softirq process, if any packet drop case happens, it increases dev's rx_dropped counter and returns NET_RX_DROP. At veth tx side, it records any error returned from peer netif_rx into local dev tx_dropped counter. In veth get stats process, it puts local dev rx_dropped and peer dev tx_dropped into together as local rx_drpped value. So that it shows double value of real dropped packets number in this case. This patch ignores peer tx_dropped when counting local rx_dropped, since peer tx_dropped is duplicated to local rx_dropped at most cases. Signed-off-by: Jiang Lidong Signed-off-by: David S. Miller --- drivers/net/veth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/veth.c b/drivers/net/veth.c index 8cdc4415fa70..d4cbb9e8c63f 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -328,7 +328,7 @@ static void veth_get_stats64(struct net_device *dev, rcu_read_lock(); peer = rcu_dereference(priv->peer); if (peer) { - tot->rx_dropped += veth_stats_tx(peer, &packets, &bytes); + veth_stats_tx(peer, &packets, &bytes); tot->rx_bytes += bytes; tot->rx_packets += packets; -- cgit v1.2.3 From b281f7b93b258ce1419043bbd898a29254d5c9c7 Mon Sep 17 00:00:00 2001 From: Madalin Bucur Date: Wed, 4 Mar 2020 18:04:27 +0200 Subject: fsl/fman: detect FMan erratum A050385 Detect the presence of the A050385 erratum. Signed-off-by: Madalin Bucur Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fman/Kconfig | 28 ++++++++++++++++++++++++++++ drivers/net/ethernet/freescale/fman/fman.c | 18 ++++++++++++++++++ drivers/net/ethernet/freescale/fman/fman.h | 5 +++++ 3 files changed, 51 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/freescale/fman/Kconfig b/drivers/net/ethernet/freescale/fman/Kconfig index 0139cb9042ec..34150182cc35 100644 --- a/drivers/net/ethernet/freescale/fman/Kconfig +++ b/drivers/net/ethernet/freescale/fman/Kconfig @@ -8,3 +8,31 @@ config FSL_FMAN help Freescale Data-Path Acceleration Architecture Frame Manager (FMan) support + +config DPAA_ERRATUM_A050385 + bool + depends on ARM64 && FSL_DPAA + default y + help + DPAA FMan erratum A050385 software workaround implementation: + align buffers, data start, SG fragment length to avoid FMan DMA + splits. + FMAN DMA read or writes under heavy traffic load may cause FMAN + internal resource leak thus stopping further packet processing. + The FMAN internal queue can overflow when FMAN splits single + read or write transactions into multiple smaller transactions + such that more than 17 AXI transactions are in flight from FMAN + to interconnect. When the FMAN internal queue overflows, it can + stall further packet processing. The issue can occur with any + one of the following three conditions: + 1. FMAN AXI transaction crosses 4K address boundary (Errata + A010022) + 2. FMAN DMA address for an AXI transaction is not 16 byte + aligned, i.e. the last 4 bits of an address are non-zero + 3. Scatter Gather (SG) frames have more than one SG buffer in + the SG list and any one of the buffers, except the last + buffer in the SG list has data size that is not a multiple + of 16 bytes, i.e., other than 16, 32, 48, 64, etc. + With any one of the above three conditions present, there is + likelihood of stalled FMAN packet processing, especially under + stress with multiple ports injecting line-rate traffic. diff --git a/drivers/net/ethernet/freescale/fman/fman.c b/drivers/net/ethernet/freescale/fman/fman.c index 934111def0be..f151d6e111dd 100644 --- a/drivers/net/ethernet/freescale/fman/fman.c +++ b/drivers/net/ethernet/freescale/fman/fman.c @@ -1,5 +1,6 @@ /* * Copyright 2008-2015 Freescale Semiconductor Inc. + * Copyright 2020 NXP * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -566,6 +567,10 @@ struct fman_cfg { u32 qmi_def_tnums_thresh; }; +#ifdef CONFIG_DPAA_ERRATUM_A050385 +static bool fman_has_err_a050385; +#endif + static irqreturn_t fman_exceptions(struct fman *fman, enum fman_exceptions exception) { @@ -2518,6 +2523,14 @@ struct fman *fman_bind(struct device *fm_dev) } EXPORT_SYMBOL(fman_bind); +#ifdef CONFIG_DPAA_ERRATUM_A050385 +bool fman_has_errata_a050385(void) +{ + return fman_has_err_a050385; +} +EXPORT_SYMBOL(fman_has_errata_a050385); +#endif + static irqreturn_t fman_err_irq(int irq, void *handle) { struct fman *fman = (struct fman *)handle; @@ -2845,6 +2858,11 @@ static struct fman *read_dts_node(struct platform_device *of_dev) goto fman_free; } +#ifdef CONFIG_DPAA_ERRATUM_A050385 + fman_has_err_a050385 = + of_property_read_bool(fm_node, "fsl,erratum-a050385"); +#endif + return fman; fman_node_put: diff --git a/drivers/net/ethernet/freescale/fman/fman.h b/drivers/net/ethernet/freescale/fman/fman.h index 935c317fa696..f2ede1360f03 100644 --- a/drivers/net/ethernet/freescale/fman/fman.h +++ b/drivers/net/ethernet/freescale/fman/fman.h @@ -1,5 +1,6 @@ /* * Copyright 2008-2015 Freescale Semiconductor Inc. + * Copyright 2020 NXP * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -398,6 +399,10 @@ u16 fman_get_max_frm(void); int fman_get_rx_extra_headroom(void); +#ifdef CONFIG_DPAA_ERRATUM_A050385 +bool fman_has_errata_a050385(void); +#endif + struct fman *fman_bind(struct device *dev); #endif /* __FM_H */ -- cgit v1.2.3 From 3c68b8fffb48c0018c24e73c48f2bac768c6203e Mon Sep 17 00:00:00 2001 From: Madalin Bucur Date: Wed, 4 Mar 2020 18:04:28 +0200 Subject: dpaa_eth: FMan erratum A050385 workaround Align buffers, data start, SG fragment length to avoid DMA splits. These changes prevent the A050385 erratum to manifest itself: FMAN DMA read or writes under heavy traffic load may cause FMAN internal resource leak; thus stopping further packet processing. The FMAN internal queue can overflow when FMAN splits single read or write transactions into multiple smaller transactions such that more than 17 AXI transactions are in flight from FMAN to interconnect. When the FMAN internal queue overflows, it can stall further packet processing. The issue can occur with any one of the following three conditions: 1. FMAN AXI transaction crosses 4K address boundary (Errata A010022) 2. FMAN DMA address for an AXI transaction is not 16 byte aligned, i.e. the last 4 bits of an address are non-zero 3. Scatter Gather (SG) frames have more than one SG buffer in the SG list and any one of the buffers, except the last buffer in the SG list has data size that is not a multiple of 16 bytes, i.e., other than 16, 32, 48, 64, etc. With any one of the above three conditions present, there is likelihood of stalled FMAN packet processing, especially under stress with multiple ports injecting line-rate traffic. To avoid situations that stall FMAN packet processing, all of the above three conditions must be avoided; therefore, configure the system with the following rules: 1. Frame buffers must not span a 4KB address boundary, unless the frame start address is 256 byte aligned 2. All FMAN DMA start addresses (for example, BMAN buffer address, FD[address] + FD[offset]) are 16B aligned 3. SG table and buffer addresses are 16B aligned and the size of SG buffers are multiple of 16 bytes, except for the last SG buffer that can be of any size. Additional workaround notes: - Address alignment of 64 bytes is recommended for maximally efficient system bus transactions (although 16 byte alignment is sufficient to avoid the stall condition) - To support frame sizes that are larger than 4K bytes, there are two options: 1. Large single buffer frames that span a 4KB page boundary can be converted into SG frames to avoid transaction splits at the 4KB boundary, 2. Align the large single buffer to 256B address boundaries, ensure that the frame address plus offset is 256B aligned. - If software generated SG frames have buffers that are unaligned and with random non-multiple of 16 byte lengths, before transmitting such frames via FMAN, frames will need to be copied into a new single buffer or multiple buffer SG frame that is compliant with the three rules listed above. Signed-off-by: Madalin Bucur Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 110 ++++++++++++++++++++++++- 1 file changed, 107 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c index fd93d542f497..e3ac9ec54c7c 100644 --- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c @@ -1,4 +1,5 @@ /* Copyright 2008 - 2016 Freescale Semiconductor Inc. + * Copyright 2020 NXP * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -123,7 +124,22 @@ MODULE_PARM_DESC(tx_timeout, "The Tx timeout in ms"); #define FSL_QMAN_MAX_OAL 127 /* Default alignment for start of data in an Rx FD */ +#ifdef CONFIG_DPAA_ERRATUM_A050385 +/* aligning data start to 64 avoids DMA transaction splits, unless the buffer + * is crossing a 4k page boundary + */ +#define DPAA_FD_DATA_ALIGNMENT (fman_has_errata_a050385() ? 64 : 16) +/* aligning to 256 avoids DMA transaction splits caused by 4k page boundary + * crossings; also, all SG fragments except the last must have a size multiple + * of 256 to avoid DMA transaction splits + */ +#define DPAA_A050385_ALIGN 256 +#define DPAA_FD_RX_DATA_ALIGNMENT (fman_has_errata_a050385() ? \ + DPAA_A050385_ALIGN : 16) +#else #define DPAA_FD_DATA_ALIGNMENT 16 +#define DPAA_FD_RX_DATA_ALIGNMENT DPAA_FD_DATA_ALIGNMENT +#endif /* The DPAA requires 256 bytes reserved and mapped for the SGT */ #define DPAA_SGT_SIZE 256 @@ -158,8 +174,13 @@ MODULE_PARM_DESC(tx_timeout, "The Tx timeout in ms"); #define DPAA_PARSE_RESULTS_SIZE sizeof(struct fman_prs_result) #define DPAA_TIME_STAMP_SIZE 8 #define DPAA_HASH_RESULTS_SIZE 8 +#ifdef CONFIG_DPAA_ERRATUM_A050385 +#define DPAA_RX_PRIV_DATA_SIZE (DPAA_A050385_ALIGN - (DPAA_PARSE_RESULTS_SIZE\ + + DPAA_TIME_STAMP_SIZE + DPAA_HASH_RESULTS_SIZE)) +#else #define DPAA_RX_PRIV_DATA_SIZE (u16)(DPAA_TX_PRIV_DATA_SIZE + \ dpaa_rx_extra_headroom) +#endif #define DPAA_ETH_PCD_RXQ_NUM 128 @@ -180,7 +201,12 @@ static struct dpaa_bp *dpaa_bp_array[BM_MAX_NUM_OF_POOLS]; #define DPAA_BP_RAW_SIZE 4096 +#ifdef CONFIG_DPAA_ERRATUM_A050385 +#define dpaa_bp_size(raw_size) (SKB_WITH_OVERHEAD(raw_size) & \ + ~(DPAA_A050385_ALIGN - 1)) +#else #define dpaa_bp_size(raw_size) SKB_WITH_OVERHEAD(raw_size) +#endif static int dpaa_max_frm; @@ -1192,7 +1218,7 @@ static int dpaa_eth_init_rx_port(struct fman_port *port, struct dpaa_bp *bp, buf_prefix_content.pass_prs_result = true; buf_prefix_content.pass_hash_result = true; buf_prefix_content.pass_time_stamp = true; - buf_prefix_content.data_align = DPAA_FD_DATA_ALIGNMENT; + buf_prefix_content.data_align = DPAA_FD_RX_DATA_ALIGNMENT; rx_p = ¶ms.specific_params.rx_params; rx_p->err_fqid = errq->fqid; @@ -1662,6 +1688,8 @@ static u8 rx_csum_offload(const struct dpaa_priv *priv, const struct qm_fd *fd) return CHECKSUM_NONE; } +#define PTR_IS_ALIGNED(x, a) (IS_ALIGNED((unsigned long)(x), (a))) + /* Build a linear skb around the received buffer. * We are guaranteed there is enough room at the end of the data buffer to * accommodate the shared info area of the skb. @@ -1733,8 +1761,7 @@ static struct sk_buff *sg_fd_to_skb(const struct dpaa_priv *priv, sg_addr = qm_sg_addr(&sgt[i]); sg_vaddr = phys_to_virt(sg_addr); - WARN_ON(!IS_ALIGNED((unsigned long)sg_vaddr, - SMP_CACHE_BYTES)); + WARN_ON(!PTR_IS_ALIGNED(sg_vaddr, SMP_CACHE_BYTES)); dma_unmap_page(priv->rx_dma_dev, sg_addr, DPAA_BP_RAW_SIZE, DMA_FROM_DEVICE); @@ -2022,6 +2049,75 @@ static inline int dpaa_xmit(struct dpaa_priv *priv, return 0; } +#ifdef CONFIG_DPAA_ERRATUM_A050385 +int dpaa_a050385_wa(struct net_device *net_dev, struct sk_buff **s) +{ + struct dpaa_priv *priv = netdev_priv(net_dev); + struct sk_buff *new_skb, *skb = *s; + unsigned char *start, i; + + /* check linear buffer alignment */ + if (!PTR_IS_ALIGNED(skb->data, DPAA_A050385_ALIGN)) + goto workaround; + + /* linear buffers just need to have an aligned start */ + if (!skb_is_nonlinear(skb)) + return 0; + + /* linear data size for nonlinear skbs needs to be aligned */ + if (!IS_ALIGNED(skb_headlen(skb), DPAA_A050385_ALIGN)) + goto workaround; + + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + + /* all fragments need to have aligned start addresses */ + if (!IS_ALIGNED(skb_frag_off(frag), DPAA_A050385_ALIGN)) + goto workaround; + + /* all but last fragment need to have aligned sizes */ + if (!IS_ALIGNED(skb_frag_size(frag), DPAA_A050385_ALIGN) && + (i < skb_shinfo(skb)->nr_frags - 1)) + goto workaround; + } + + return 0; + +workaround: + /* copy all the skb content into a new linear buffer */ + new_skb = netdev_alloc_skb(net_dev, skb->len + DPAA_A050385_ALIGN - 1 + + priv->tx_headroom); + if (!new_skb) + return -ENOMEM; + + /* NET_SKB_PAD bytes already reserved, adding up to tx_headroom */ + skb_reserve(new_skb, priv->tx_headroom - NET_SKB_PAD); + + /* Workaround for DPAA_A050385 requires data start to be aligned */ + start = PTR_ALIGN(new_skb->data, DPAA_A050385_ALIGN); + if (start - new_skb->data != 0) + skb_reserve(new_skb, start - new_skb->data); + + skb_put(new_skb, skb->len); + skb_copy_bits(skb, 0, new_skb->data, skb->len); + skb_copy_header(new_skb, skb); + new_skb->dev = skb->dev; + + /* We move the headroom when we align it so we have to reset the + * network and transport header offsets relative to the new data + * pointer. The checksum offload relies on these offsets. + */ + skb_set_network_header(new_skb, skb_network_offset(skb)); + skb_set_transport_header(new_skb, skb_transport_offset(skb)); + + /* TODO: does timestamping need the result in the old skb? */ + dev_kfree_skb(skb); + *s = new_skb; + + return 0; +} +#endif + static netdev_tx_t dpaa_start_xmit(struct sk_buff *skb, struct net_device *net_dev) { @@ -2068,6 +2164,14 @@ dpaa_start_xmit(struct sk_buff *skb, struct net_device *net_dev) nonlinear = skb_is_nonlinear(skb); } +#ifdef CONFIG_DPAA_ERRATUM_A050385 + if (unlikely(fman_has_errata_a050385())) { + if (dpaa_a050385_wa(net_dev, &skb)) + goto enomem; + nonlinear = skb_is_nonlinear(skb); + } +#endif + if (nonlinear) { /* Just create a S/G fd based on the skb */ err = skb_to_sg_fd(priv, skb, &fd); -- cgit v1.2.3 From b7469e83d2add567e4e0b063963db185f3167cea Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 4 Mar 2020 09:32:16 -0800 Subject: bonding/alb: make sure arp header is pulled before accessing it Similar to commit 38f88c454042 ("bonding/alb: properly access headers in bond_alb_xmit()"), we need to make sure arp header was pulled in skb->head before blindly accessing it in rlb_arp_xmit(). Remove arp_pkt() private helper, since it is more readable/obvious to have the following construct back to back : if (!pskb_network_may_pull(skb, sizeof(*arp))) return NULL; arp = (struct arp_pkt *)skb_network_header(skb); syzbot reported : BUG: KMSAN: uninit-value in bond_slave_has_mac_rx include/net/bonding.h:704 [inline] BUG: KMSAN: uninit-value in rlb_arp_xmit drivers/net/bonding/bond_alb.c:662 [inline] BUG: KMSAN: uninit-value in bond_alb_xmit+0x575/0x25e0 drivers/net/bonding/bond_alb.c:1477 CPU: 0 PID: 12743 Comm: syz-executor.4 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 bond_slave_has_mac_rx include/net/bonding.h:704 [inline] rlb_arp_xmit drivers/net/bonding/bond_alb.c:662 [inline] bond_alb_xmit+0x575/0x25e0 drivers/net/bonding/bond_alb.c:1477 __bond_start_xmit drivers/net/bonding/bond_main.c:4257 [inline] bond_start_xmit+0x85d/0x2f70 drivers/net/bonding/bond_main.c:4282 __netdev_start_xmit include/linux/netdevice.h:4524 [inline] netdev_start_xmit include/linux/netdevice.h:4538 [inline] xmit_one net/core/dev.c:3470 [inline] dev_hard_start_xmit+0x531/0xab0 net/core/dev.c:3486 __dev_queue_xmit+0x37de/0x4220 net/core/dev.c:4063 dev_queue_xmit+0x4b/0x60 net/core/dev.c:4096 packet_snd net/packet/af_packet.c:2967 [inline] packet_sendmsg+0x8347/0x93b0 net/packet/af_packet.c:2992 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg net/socket.c:672 [inline] __sys_sendto+0xc1b/0xc50 net/socket.c:1998 __do_sys_sendto net/socket.c:2010 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:2006 __x64_sys_sendto+0x6e/0x90 net/socket.c:2006 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45c479 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fc77ffbbc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007fc77ffbc6d4 RCX: 000000000045c479 RDX: 000000000000000e RSI: 00000000200004c0 RDI: 0000000000000003 RBP: 000000000076bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000a04 R14: 00000000004cc7b0 R15: 000000000076bf2c Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82 slab_alloc_node mm/slub.c:2793 [inline] __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4401 __kmalloc_reserve net/core/skbuff.c:142 [inline] __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:210 alloc_skb include/linux/skbuff.h:1051 [inline] alloc_skb_with_frags+0x18c/0xa70 net/core/skbuff.c:5766 sock_alloc_send_pskb+0xada/0xc60 net/core/sock.c:2242 packet_alloc_skb net/packet/af_packet.c:2815 [inline] packet_snd net/packet/af_packet.c:2910 [inline] packet_sendmsg+0x66a0/0x93b0 net/packet/af_packet.c:2992 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg net/socket.c:672 [inline] __sys_sendto+0xc1b/0xc50 net/socket.c:1998 __do_sys_sendto net/socket.c:2010 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:2006 __x64_sys_sendto+0x6e/0x90 net/socket.c:2006 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet Reported-by: syzbot Cc: Jay Vosburgh Cc: Veaceslav Falico Cc: Andy Gospodarek Signed-off-by: David S. Miller --- drivers/net/bonding/bond_alb.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index 1cc2cd894f87..c81698550e5a 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -50,11 +50,6 @@ struct arp_pkt { }; #pragma pack() -static inline struct arp_pkt *arp_pkt(const struct sk_buff *skb) -{ - return (struct arp_pkt *)skb_network_header(skb); -} - /* Forward declaration */ static void alb_send_learning_packets(struct slave *slave, u8 mac_addr[], bool strict_match); @@ -553,10 +548,11 @@ static void rlb_req_update_subnet_clients(struct bonding *bond, __be32 src_ip) spin_unlock(&bond->mode_lock); } -static struct slave *rlb_choose_channel(struct sk_buff *skb, struct bonding *bond) +static struct slave *rlb_choose_channel(struct sk_buff *skb, + struct bonding *bond, + const struct arp_pkt *arp) { struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond)); - struct arp_pkt *arp = arp_pkt(skb); struct slave *assigned_slave, *curr_active_slave; struct rlb_client_info *client_info; u32 hash_index = 0; @@ -653,8 +649,12 @@ static struct slave *rlb_choose_channel(struct sk_buff *skb, struct bonding *bon */ static struct slave *rlb_arp_xmit(struct sk_buff *skb, struct bonding *bond) { - struct arp_pkt *arp = arp_pkt(skb); struct slave *tx_slave = NULL; + struct arp_pkt *arp; + + if (!pskb_network_may_pull(skb, sizeof(*arp))) + return NULL; + arp = (struct arp_pkt *)skb_network_header(skb); /* Don't modify or load balance ARPs that do not originate locally * (e.g.,arrive via a bridge). @@ -664,7 +664,7 @@ static struct slave *rlb_arp_xmit(struct sk_buff *skb, struct bonding *bond) if (arp->op_code == htons(ARPOP_REPLY)) { /* the arp must be sent on the selected rx channel */ - tx_slave = rlb_choose_channel(skb, bond); + tx_slave = rlb_choose_channel(skb, bond, arp); if (tx_slave) bond_hw_addr_copy(arp->mac_src, tx_slave->dev->dev_addr, tx_slave->dev->addr_len); @@ -676,7 +676,7 @@ static struct slave *rlb_arp_xmit(struct sk_buff *skb, struct bonding *bond) * When the arp reply is received the entry will be updated * with the correct unicast address of the client. */ - tx_slave = rlb_choose_channel(skb, bond); + tx_slave = rlb_choose_channel(skb, bond, arp); /* The ARP reply packets must be delayed so that * they can cancel out the influence of the ARP request. -- cgit v1.2.3 From e396ce5f4229388db5143fec0ec36af504bff12e Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Wed, 4 Mar 2020 09:42:10 -0800 Subject: ionic: fix vf op lock usage These are a couple of read locks that should be write locks. Fixes: fbb39807e9ae ("ionic: support sr-iov operations") Signed-off-by: Shannon Nelson Reviewed-by: Parav Pandit Signed-off-by: David S. Miller --- drivers/net/ethernet/pensando/ionic/ionic_lif.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/pensando/ionic/ionic_lif.c b/drivers/net/ethernet/pensando/ionic/ionic_lif.c index 191271f6260d..c2f5b691e0fa 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_lif.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_lif.c @@ -1688,7 +1688,7 @@ static int ionic_set_vf_mac(struct net_device *netdev, int vf, u8 *mac) if (!(is_zero_ether_addr(mac) || is_valid_ether_addr(mac))) return -EINVAL; - down_read(&ionic->vf_op_lock); + down_write(&ionic->vf_op_lock); if (vf >= pci_num_vf(ionic->pdev) || !ionic->vfs) { ret = -EINVAL; @@ -1698,7 +1698,7 @@ static int ionic_set_vf_mac(struct net_device *netdev, int vf, u8 *mac) ether_addr_copy(ionic->vfs[vf].macaddr, mac); } - up_read(&ionic->vf_op_lock); + up_write(&ionic->vf_op_lock); return ret; } @@ -1719,7 +1719,7 @@ static int ionic_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, if (proto != htons(ETH_P_8021Q)) return -EPROTONOSUPPORT; - down_read(&ionic->vf_op_lock); + down_write(&ionic->vf_op_lock); if (vf >= pci_num_vf(ionic->pdev) || !ionic->vfs) { ret = -EINVAL; @@ -1730,7 +1730,7 @@ static int ionic_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, ionic->vfs[vf].vlanid = vlan; } - up_read(&ionic->vf_op_lock); + up_write(&ionic->vf_op_lock); return ret; } -- cgit v1.2.3 From 63aae7b17344d4b08a7d05cb07044de4c0f9dcc6 Mon Sep 17 00:00:00 2001 From: Jiri Wiesner Date: Sat, 7 Mar 2020 13:31:57 +0100 Subject: ipvlan: do not add hardware address of master to its unicast filter list There is a problem when ipvlan slaves are created on a master device that is a vmxnet3 device (ipvlan in VMware guests). The vmxnet3 driver does not support unicast address filtering. When an ipvlan device is brought up in ipvlan_open(), the ipvlan driver calls dev_uc_add() to add the hardware address of the vmxnet3 master device to the unicast address list of the master device, phy_dev->uc. This inevitably leads to the vmxnet3 master device being forced into promiscuous mode by __dev_set_rx_mode(). Promiscuous mode is switched on the master despite the fact that there is still only one hardware address that the master device should use for filtering in order for the ipvlan device to be able to receive packets. The comment above struct net_device describes the uc_promisc member as a "counter, that indicates, that promiscuous mode has been enabled due to the need to listen to additional unicast addresses in a device that does not implement ndo_set_rx_mode()". Moreover, the design of ipvlan guarantees that only the hardware address of a master device, phy_dev->dev_addr, will be used to transmit and receive all packets from its ipvlan slaves. Thus, the unicast address list of the master device should not be modified by ipvlan_open() and ipvlan_stop() in order to make ipvlan a workable option on masters that do not support unicast address filtering. Fixes: 2ad7bf3638411 ("ipvlan: Initial check-in of the IPVLAN driver") Reported-by: Per Sundstrom Signed-off-by: Jiri Wiesner Reviewed-by: Eric Dumazet Acked-by: Mahesh Bandewar Signed-off-by: David S. Miller --- drivers/net/ipvlan/ipvlan_main.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ipvlan/ipvlan_main.c b/drivers/net/ipvlan/ipvlan_main.c index a70662261a5a..f195f278a83a 100644 --- a/drivers/net/ipvlan/ipvlan_main.c +++ b/drivers/net/ipvlan/ipvlan_main.c @@ -164,7 +164,6 @@ static void ipvlan_uninit(struct net_device *dev) static int ipvlan_open(struct net_device *dev) { struct ipvl_dev *ipvlan = netdev_priv(dev); - struct net_device *phy_dev = ipvlan->phy_dev; struct ipvl_addr *addr; if (ipvlan->port->mode == IPVLAN_MODE_L3 || @@ -178,7 +177,7 @@ static int ipvlan_open(struct net_device *dev) ipvlan_ht_addr_add(ipvlan, addr); rcu_read_unlock(); - return dev_uc_add(phy_dev, phy_dev->dev_addr); + return 0; } static int ipvlan_stop(struct net_device *dev) @@ -190,8 +189,6 @@ static int ipvlan_stop(struct net_device *dev) dev_uc_unsync(phy_dev, dev); dev_mc_unsync(phy_dev, dev); - dev_uc_del(phy_dev, phy_dev->dev_addr); - rcu_read_lock(); list_for_each_entry_rcu(addr, &ipvlan->addrs, anode) ipvlan_ht_addr_del(addr); -- cgit v1.2.3 From b723bd933980f4956dabc8a8d84b3e83be8d094c Mon Sep 17 00:00:00 2001 From: Remi Pommarel Date: Sun, 8 Mar 2020 10:25:56 +0100 Subject: net: stmmac: dwmac1000: Disable ACS if enhanced descs are not used ACS (auto PAD/FCS stripping) removes FCS off 802.3 packets (LLC) so that there is no need to manually strip it for such packets. The enhanced DMA descriptors allow to flag LLC packets so that the receiving callback can use that to strip FCS manually or not. On the other hand, normal descriptors do not support that. Thus in order to not truncate LLC packet ACS should be disabled when using normal DMA descriptors. Fixes: 47dd7a540b8a0 ("net: add support for STMicroelectronics Ethernet controllers.") Signed-off-by: Remi Pommarel Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c index d0356fbd1e43..542784300620 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c @@ -24,6 +24,7 @@ static void dwmac1000_core_init(struct mac_device_info *hw, struct net_device *dev) { + struct stmmac_priv *priv = netdev_priv(dev); void __iomem *ioaddr = hw->pcsr; u32 value = readl(ioaddr + GMAC_CONTROL); int mtu = dev->mtu; @@ -35,7 +36,7 @@ static void dwmac1000_core_init(struct mac_device_info *hw, * Broadcom tags can look like invalid LLC/SNAP packets and cause the * hardware to truncate packets on reception. */ - if (netdev_uses_dsa(dev)) + if (netdev_uses_dsa(dev) || !priv->plat->enh_desc) value &= ~GMAC_CONTROL_ACS; if (mtu > 1500) -- cgit v1.2.3 From 4b1bd9db078f7d5332c8601a2f5bd43cf0458fd4 Mon Sep 17 00:00:00 2001 From: Edward Cree Date: Mon, 9 Mar 2020 18:16:24 +0000 Subject: sfc: detach from cb_page in efx_copy_channel() It's a resource, not a parameter, so we can't copy it into the new channel's TX queues, otherwise aliasing will lead to resource- management bugs if the channel is subsequently torn down without being initialised. Before the Fixes:-tagged commit there was a similar bug with tsoh_page, but I'm not sure it's worth doing another fix for such old kernels. Fixes: e9117e5099ea ("sfc: Firmware-Assisted TSO version 2") Suggested-by: Derek Shute Signed-off-by: Edward Cree Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/efx_channels.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/sfc/efx_channels.c b/drivers/net/ethernet/sfc/efx_channels.c index aeb5e8aa2f2a..73d4e39b5b16 100644 --- a/drivers/net/ethernet/sfc/efx_channels.c +++ b/drivers/net/ethernet/sfc/efx_channels.c @@ -583,6 +583,7 @@ struct efx_channel *efx_copy_channel(const struct efx_channel *old_channel) if (tx_queue->channel) tx_queue->channel = channel; tx_queue->buffer = NULL; + tx_queue->cb_page = NULL; memset(&tx_queue->txd, 0, sizeof(tx_queue->txd)); } -- cgit v1.2.3 From ad8192767c9f9cf97da57b9ffcea70fb100febef Mon Sep 17 00:00:00 2001 From: Mahesh Bandewar Date: Mon, 9 Mar 2020 15:56:56 -0700 Subject: ipvlan: don't deref eth hdr before checking it's set MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit IPvlan in L3 mode discards outbound multicast packets but performs the check before ensuring the ether-header is set or not. This is an error that Eric found through code browsing. Fixes: 2ad7bf363841 (“ipvlan: Initial check-in of the IPVLAN driver.”) Signed-off-by: Mahesh Bandewar Reported-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ipvlan/ipvlan_core.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ipvlan/ipvlan_core.c b/drivers/net/ipvlan/ipvlan_core.c index 30cd0c4f0be0..53dac397db37 100644 --- a/drivers/net/ipvlan/ipvlan_core.c +++ b/drivers/net/ipvlan/ipvlan_core.c @@ -498,19 +498,21 @@ static int ipvlan_process_outbound(struct sk_buff *skb) struct ethhdr *ethh = eth_hdr(skb); int ret = NET_XMIT_DROP; - /* In this mode we dont care about multicast and broadcast traffic */ - if (is_multicast_ether_addr(ethh->h_dest)) { - pr_debug_ratelimited("Dropped {multi|broad}cast of type=[%x]\n", - ntohs(skb->protocol)); - kfree_skb(skb); - goto out; - } - /* The ipvlan is a pseudo-L2 device, so the packets that we receive * will have L2; which need to discarded and processed further * in the net-ns of the main-device. */ if (skb_mac_header_was_set(skb)) { + /* In this mode we dont care about + * multicast and broadcast traffic */ + if (is_multicast_ether_addr(ethh->h_dest)) { + pr_debug_ratelimited( + "Dropped {multi|broad}cast of type=[%x]\n", + ntohs(skb->protocol)); + kfree_skb(skb); + goto out; + } + skb_pull(skb, sizeof(*ethh)); skb->mac_header = (typeof(skb->mac_header))~0U; skb_reset_network_header(skb); -- cgit v1.2.3 From e18b353f102e371580f3f01dd47567a25acc3c1d Mon Sep 17 00:00:00 2001 From: Mahesh Bandewar Date: Mon, 9 Mar 2020 15:57:02 -0700 Subject: ipvlan: add cond_resched_rcu() while processing muticast backlog MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If there are substantial number of slaves created as simulated by Syzbot, the backlog processing could take much longer and result into the issue found in the Syzbot report. INFO: rcu_sched detected stalls on CPUs/tasks: (detected by 1, t=10502 jiffies, g=5049, c=5048, q=752) All QSes seen, last rcu_sched kthread activity 10502 (4294965563-4294955061), jiffies_till_next_fqs=1, root ->qsmask 0x0 syz-executor.1 R running task on cpu 1 10984 11210 3866 0x30020008 179034491270 Call Trace: [] _sched_show_task kernel/sched/core.c:8063 [inline] [] _sched_show_task.cold+0x2fd/0x392 kernel/sched/core.c:8030 [] sched_show_task+0xb/0x10 kernel/sched/core.c:8073 [] print_other_cpu_stall kernel/rcu/tree.c:1577 [inline] [] check_cpu_stall kernel/rcu/tree.c:1695 [inline] [] __rcu_pending kernel/rcu/tree.c:3478 [inline] [] rcu_pending kernel/rcu/tree.c:3540 [inline] [] rcu_check_callbacks.cold+0xbb4/0xc29 kernel/rcu/tree.c:2876 [] update_process_times+0x32/0x80 kernel/time/timer.c:1635 [] tick_sched_handle+0xa0/0x180 kernel/time/tick-sched.c:161 [] tick_sched_timer+0x44/0x130 kernel/time/tick-sched.c:1193 [] __run_hrtimer kernel/time/hrtimer.c:1393 [inline] [] __hrtimer_run_queues+0x307/0xd90 kernel/time/hrtimer.c:1455 [] hrtimer_interrupt+0x2ea/0x730 kernel/time/hrtimer.c:1513 [] local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1031 [inline] [] smp_apic_timer_interrupt+0x144/0x5e0 arch/x86/kernel/apic/apic.c:1056 [] apic_timer_interrupt+0x8e/0xa0 arch/x86/entry/entry_64.S:778 RIP: 0010:do_raw_read_lock+0x22/0x80 kernel/locking/spinlock_debug.c:153 RSP: 0018:ffff8801dad07ab8 EFLAGS: 00000a02 ORIG_RAX: ffffffffffffff12 RAX: 0000000000000000 RBX: ffff8801c4135680 RCX: 0000000000000000 RDX: 1ffff10038826afe RSI: ffff88019d816bb8 RDI: ffff8801c41357f0 RBP: ffff8801dad07ac0 R08: 0000000000004b15 R09: 0000000000310273 R10: ffff88019d816bb8 R11: 0000000000000001 R12: ffff8801c41357e8 R13: 0000000000000000 R14: ffff8801cfb19850 R15: ffff8801cfb198b0 [] __raw_read_lock_bh include/linux/rwlock_api_smp.h:177 [inline] [] _raw_read_lock_bh+0x3e/0x50 kernel/locking/spinlock.c:240 [] ipv6_chk_mcast_addr+0x11a/0x6f0 net/ipv6/mcast.c:1006 [] ip6_mc_input+0x319/0x8e0 net/ipv6/ip6_input.c:482 [] dst_input include/net/dst.h:449 [inline] [] ip6_rcv_finish+0x408/0x610 net/ipv6/ip6_input.c:78 [] NF_HOOK include/linux/netfilter.h:292 [inline] [] NF_HOOK include/linux/netfilter.h:286 [inline] [] ipv6_rcv+0x10e/0x420 net/ipv6/ip6_input.c:278 [] __netif_receive_skb_one_core+0x12a/0x1f0 net/core/dev.c:5303 [] __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:5417 [] process_backlog+0x216/0x6c0 net/core/dev.c:6243 [] napi_poll net/core/dev.c:6680 [inline] [] net_rx_action+0x47b/0xfb0 net/core/dev.c:6748 [] __do_softirq+0x2c8/0x99a kernel/softirq.c:317 [] invoke_softirq kernel/softirq.c:399 [inline] [] irq_exit+0x16a/0x1a0 kernel/softirq.c:439 [] exiting_irq arch/x86/include/asm/apic.h:561 [inline] [] smp_apic_timer_interrupt+0x165/0x5e0 arch/x86/kernel/apic/apic.c:1058 [] apic_timer_interrupt+0x8e/0xa0 arch/x86/entry/entry_64.S:778 RIP: 0010:__sanitizer_cov_trace_pc+0x26/0x50 kernel/kcov.c:102 RSP: 0018:ffff880196033bd8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff12 RAX: ffff88019d8161c0 RBX: 00000000ffffffff RCX: ffffc90003501000 RDX: 0000000000000002 RSI: ffffffff816236d1 RDI: 0000000000000005 RBP: ffff880196033bd8 R08: ffff88019d8161c0 R09: 0000000000000000 R10: 1ffff10032c067f0 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000080 R14: 0000000000000000 R15: 0000000000000000 [] do_futex+0x151/0x1d50 kernel/futex.c:3548 [] C_SYSC_futex kernel/futex_compat.c:201 [inline] [] compat_SyS_futex+0x270/0x3b0 kernel/futex_compat.c:175 [] do_syscall_32_irqs_on arch/x86/entry/common.c:353 [inline] [] do_fast_syscall_32+0x357/0xe1c arch/x86/entry/common.c:415 [] entry_SYSENTER_compat+0x8b/0x9d arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7f23c69 RSP: 002b:00000000f5d1f12c EFLAGS: 00000282 ORIG_RAX: 00000000000000f0 RAX: ffffffffffffffda RBX: 000000000816af88 RCX: 0000000000000080 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000816af8c RBP: 00000000f5d1f228 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 rcu_sched kthread starved for 10502 jiffies! g5049 c5048 f0x2 RCU_GP_WAIT_FQS(3) ->state=0x0 ->cpu=1 rcu_sched R running task on cpu 1 13048 8 2 0x90000000 179099587640 Call Trace: [] context_switch+0x60f/0xa60 kernel/sched/core.c:3209 [] __schedule+0x5aa/0x1da0 kernel/sched/core.c:3934 [] schedule+0x8f/0x1b0 kernel/sched/core.c:4011 [] schedule_timeout+0x50d/0xee0 kernel/time/timer.c:1803 [] rcu_gp_kthread+0xda1/0x3b50 kernel/rcu/tree.c:2327 [] kthread+0x348/0x420 kernel/kthread.c:246 [] ret_from_fork+0x56/0x70 arch/x86/entry/entry_64.S:393 Fixes: ba35f8588f47 (“ipvlan: Defer multicast / broadcast processing to a work-queue”) Signed-off-by: Mahesh Bandewar Reported-by: syzbot Signed-off-by: David S. Miller --- drivers/net/ipvlan/ipvlan_core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ipvlan/ipvlan_core.c b/drivers/net/ipvlan/ipvlan_core.c index 53dac397db37..5759e91dec71 100644 --- a/drivers/net/ipvlan/ipvlan_core.c +++ b/drivers/net/ipvlan/ipvlan_core.c @@ -277,6 +277,7 @@ void ipvlan_process_multicast(struct work_struct *work) } ipvlan_count_rx(ipvlan, len, ret == NET_RX_SUCCESS, true); local_bh_enable(); + cond_resched_rcu(); } rcu_read_unlock(); -- cgit v1.2.3 From ce9a4186f9ac475c415ffd20348176a4ea366670 Mon Sep 17 00:00:00 2001 From: Mahesh Bandewar Date: Mon, 9 Mar 2020 15:57:07 -0700 Subject: macvlan: add cond_resched() during multicast processing The Rx bound multicast packets are deferred to a workqueue and macvlan can also suffer from the same attack that was discovered by Syzbot for IPvlan. This solution is not as effective as in IPvlan. IPvlan defers all (Tx and Rx) multicast packet processing to a workqueue while macvlan does this way only for the Rx. This fix should address the Rx codition to certain extent. Tx is still suseptible. Tx multicast processing happens when .ndo_start_xmit is called, hence we cannot add cond_resched(). However, it's not that severe since the user which is generating / flooding will be affected the most. Fixes: 412ca1550cbe ("macvlan: Move broadcasts into a work queue") Signed-off-by: Mahesh Bandewar Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 81aa7adf4801..e7289d67268f 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -334,6 +334,8 @@ static void macvlan_process_broadcast(struct work_struct *w) if (src) dev_put(src->dev); consume_skb(skb); + + cond_resched(); } } -- cgit v1.2.3 From afe207d80a61e4d6e7cfa0611a4af46d0ba95628 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 9 Mar 2020 18:22:58 -0700 Subject: ipvlan: do not use cond_resched_rcu() in ipvlan_process_multicast() Commit e18b353f102e ("ipvlan: add cond_resched_rcu() while processing muticast backlog") added a cond_resched_rcu() in a loop using rcu protection to iterate over slaves. This is breaking rcu rules, so lets instead use cond_resched() at a point we can reschedule Fixes: e18b353f102e ("ipvlan: add cond_resched_rcu() while processing muticast backlog") Signed-off-by: Eric Dumazet Cc: Mahesh Bandewar Signed-off-by: David S. Miller --- drivers/net/ipvlan/ipvlan_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ipvlan/ipvlan_core.c b/drivers/net/ipvlan/ipvlan_core.c index 5759e91dec71..8801d093135c 100644 --- a/drivers/net/ipvlan/ipvlan_core.c +++ b/drivers/net/ipvlan/ipvlan_core.c @@ -277,7 +277,6 @@ void ipvlan_process_multicast(struct work_struct *work) } ipvlan_count_rx(ipvlan, len, ret == NET_RX_SUCCESS, true); local_bh_enable(); - cond_resched_rcu(); } rcu_read_unlock(); @@ -294,6 +293,7 @@ void ipvlan_process_multicast(struct work_struct *work) } if (dev) dev_put(dev); + cond_resched(); } } -- cgit v1.2.3 From a8015ded89ad740d21355470d41879c5bd82aab7 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 10 Mar 2020 03:28:18 +0200 Subject: net: mscc: ocelot: properly account for VLAN header length when setting MRU What the driver writes into MAC_MAXLEN_CFG does not actually represent VLAN_ETH_FRAME_LEN but instead ETH_FRAME_LEN + ETH_FCS_LEN. Yes they are numerically equal, but the difference is important, as the switch treats VLAN-tagged traffic specially and knows to increase the maximum accepted frame size automatically. So it is always wrong to account for VLAN in the MAC_MAXLEN_CFG register. Unconditionally increase the maximum allowed frame size for double-tagged traffic. Accounting for the additional length does not mean that the other VLAN membership checks aren't performed, so there's no harm done. Also, stop abusing the MTU name for configuring the MRU. There is no support for configuring the MRU on an interface at the moment. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Fixes: fa914e9c4d94 ("net: mscc: ocelot: create a helper for changing the port MTU") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/ethernet/mscc/ocelot.c | 28 +++++++++++++++++----------- include/soc/mscc/ocelot_dev.h | 2 +- 2 files changed, 18 insertions(+), 12 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c index 86d543ab1ab9..d3b7373c5961 100644 --- a/drivers/net/ethernet/mscc/ocelot.c +++ b/drivers/net/ethernet/mscc/ocelot.c @@ -2176,24 +2176,29 @@ static int ocelot_init_timestamp(struct ocelot *ocelot) return 0; } -static void ocelot_port_set_mtu(struct ocelot *ocelot, int port, size_t mtu) +/* Configure the maximum SDU (L2 payload) on RX to the value specified in @sdu. + * The length of VLAN tags is accounted for automatically via DEV_MAC_TAGS_CFG. + */ +static void ocelot_port_set_maxlen(struct ocelot *ocelot, int port, size_t sdu) { struct ocelot_port *ocelot_port = ocelot->ports[port]; + int maxlen = sdu + ETH_HLEN + ETH_FCS_LEN; int atop_wm; - ocelot_port_writel(ocelot_port, mtu, DEV_MAC_MAXLEN_CFG); + ocelot_port_writel(ocelot_port, maxlen, DEV_MAC_MAXLEN_CFG); /* Set Pause WM hysteresis - * 152 = 6 * mtu / OCELOT_BUFFER_CELL_SZ - * 101 = 4 * mtu / OCELOT_BUFFER_CELL_SZ + * 152 = 6 * maxlen / OCELOT_BUFFER_CELL_SZ + * 101 = 4 * maxlen / OCELOT_BUFFER_CELL_SZ */ ocelot_write_rix(ocelot, SYS_PAUSE_CFG_PAUSE_ENA | SYS_PAUSE_CFG_PAUSE_STOP(101) | SYS_PAUSE_CFG_PAUSE_START(152), SYS_PAUSE_CFG, port); /* Tail dropping watermark */ - atop_wm = (ocelot->shared_queue_sz - 9 * mtu) / OCELOT_BUFFER_CELL_SZ; - ocelot_write_rix(ocelot, ocelot_wm_enc(9 * mtu), + atop_wm = (ocelot->shared_queue_sz - 9 * maxlen) / + OCELOT_BUFFER_CELL_SZ; + ocelot_write_rix(ocelot, ocelot_wm_enc(9 * maxlen), SYS_ATOP, port); ocelot_write(ocelot, ocelot_wm_enc(atop_wm), SYS_ATOP_TOT_CFG); } @@ -2222,9 +2227,10 @@ void ocelot_init_port(struct ocelot *ocelot, int port) DEV_MAC_HDX_CFG); /* Set Max Length and maximum tags allowed */ - ocelot_port_set_mtu(ocelot, port, VLAN_ETH_FRAME_LEN); + ocelot_port_set_maxlen(ocelot, port, ETH_DATA_LEN); ocelot_port_writel(ocelot_port, DEV_MAC_TAGS_CFG_TAG_ID(ETH_P_8021AD) | DEV_MAC_TAGS_CFG_VLAN_AWR_ENA | + DEV_MAC_TAGS_CFG_VLAN_DBL_AWR_ENA | DEV_MAC_TAGS_CFG_VLAN_LEN_AWR_ENA, DEV_MAC_TAGS_CFG); @@ -2310,18 +2316,18 @@ void ocelot_set_cpu_port(struct ocelot *ocelot, int cpu, * Only one port can be an NPI at the same time. */ if (cpu < ocelot->num_phys_ports) { - int mtu = VLAN_ETH_FRAME_LEN + OCELOT_TAG_LEN; + int sdu = ETH_DATA_LEN + OCELOT_TAG_LEN; ocelot_write(ocelot, QSYS_EXT_CPU_CFG_EXT_CPUQ_MSK_M | QSYS_EXT_CPU_CFG_EXT_CPU_PORT(cpu), QSYS_EXT_CPU_CFG); if (injection == OCELOT_TAG_PREFIX_SHORT) - mtu += OCELOT_SHORT_PREFIX_LEN; + sdu += OCELOT_SHORT_PREFIX_LEN; else if (injection == OCELOT_TAG_PREFIX_LONG) - mtu += OCELOT_LONG_PREFIX_LEN; + sdu += OCELOT_LONG_PREFIX_LEN; - ocelot_port_set_mtu(ocelot, cpu, mtu); + ocelot_port_set_maxlen(ocelot, cpu, sdu); } /* CPU port Injection/Extraction configuration */ diff --git a/include/soc/mscc/ocelot_dev.h b/include/soc/mscc/ocelot_dev.h index 0a50d53bbd3f..7c08437061fc 100644 --- a/include/soc/mscc/ocelot_dev.h +++ b/include/soc/mscc/ocelot_dev.h @@ -74,7 +74,7 @@ #define DEV_MAC_TAGS_CFG_TAG_ID_M GENMASK(31, 16) #define DEV_MAC_TAGS_CFG_TAG_ID_X(x) (((x) & GENMASK(31, 16)) >> 16) #define DEV_MAC_TAGS_CFG_VLAN_LEN_AWR_ENA BIT(2) -#define DEV_MAC_TAGS_CFG_PB_ENA BIT(1) +#define DEV_MAC_TAGS_CFG_VLAN_DBL_AWR_ENA BIT(1) #define DEV_MAC_TAGS_CFG_VLAN_AWR_ENA BIT(0) #define DEV_MAC_ADV_CHK_CFG 0x2c -- cgit v1.2.3 From 7d7195a026bac47ac9943f11f84b7546276209dd Mon Sep 17 00:00:00 2001 From: Juliet Kim Date: Tue, 10 Mar 2020 09:23:58 -0500 Subject: ibmvnic: Do not process device remove during device reset The ibmvnic driver does not check the device state when the device is removed. If the device is removed while a device reset is being processed, the remove may free structures needed by the reset, causing an oops. Fix this by checking the device state before processing device remove. Signed-off-by: Juliet Kim Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 24 ++++++++++++++++++++++-- drivers/net/ethernet/ibm/ibmvnic.h | 6 +++++- 2 files changed, 27 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index c75239d8820f..4bd33245bad6 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -2142,6 +2142,8 @@ static void __ibmvnic_reset(struct work_struct *work) { struct ibmvnic_rwi *rwi; struct ibmvnic_adapter *adapter; + bool saved_state = false; + unsigned long flags; u32 reset_state; int rc = 0; @@ -2153,17 +2155,25 @@ static void __ibmvnic_reset(struct work_struct *work) return; } - reset_state = adapter->state; - rwi = get_next_rwi(adapter); while (rwi) { + spin_lock_irqsave(&adapter->state_lock, flags); + if (adapter->state == VNIC_REMOVING || adapter->state == VNIC_REMOVED) { + spin_unlock_irqrestore(&adapter->state_lock, flags); kfree(rwi); rc = EBUSY; break; } + if (!saved_state) { + reset_state = adapter->state; + adapter->state = VNIC_RESETTING; + saved_state = true; + } + spin_unlock_irqrestore(&adapter->state_lock, flags); + if (rwi->reset_reason == VNIC_RESET_CHANGE_PARAM) { /* CHANGE_PARAM requestor holds rtnl_lock */ rc = do_change_param_reset(adapter, rwi, reset_state); @@ -5091,6 +5101,7 @@ static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id) __ibmvnic_delayed_reset); INIT_LIST_HEAD(&adapter->rwi_list); spin_lock_init(&adapter->rwi_lock); + spin_lock_init(&adapter->state_lock); mutex_init(&adapter->fw_lock); init_completion(&adapter->init_done); init_completion(&adapter->fw_done); @@ -5163,8 +5174,17 @@ static int ibmvnic_remove(struct vio_dev *dev) { struct net_device *netdev = dev_get_drvdata(&dev->dev); struct ibmvnic_adapter *adapter = netdev_priv(netdev); + unsigned long flags; + + spin_lock_irqsave(&adapter->state_lock, flags); + if (adapter->state == VNIC_RESETTING) { + spin_unlock_irqrestore(&adapter->state_lock, flags); + return -EBUSY; + } adapter->state = VNIC_REMOVING; + spin_unlock_irqrestore(&adapter->state_lock, flags); + rtnl_lock(); unregister_netdevice(netdev); diff --git a/drivers/net/ethernet/ibm/ibmvnic.h b/drivers/net/ethernet/ibm/ibmvnic.h index 60eccaf91b12..f8416e1d4cf0 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.h +++ b/drivers/net/ethernet/ibm/ibmvnic.h @@ -941,7 +941,8 @@ enum vnic_state {VNIC_PROBING = 1, VNIC_CLOSING, VNIC_CLOSED, VNIC_REMOVING, - VNIC_REMOVED}; + VNIC_REMOVED, + VNIC_RESETTING}; enum ibmvnic_reset_reason {VNIC_RESET_FAILOVER = 1, VNIC_RESET_MOBILITY, @@ -1090,4 +1091,7 @@ struct ibmvnic_adapter { struct ibmvnic_tunables desired; struct ibmvnic_tunables fallback; + + /* Used for serializatin of state field */ + spinlock_t state_lock; }; -- cgit v1.2.3 From 6fc498bc82929ee23aa2f35a828c6178dfd3f823 Mon Sep 17 00:00:00 2001 From: Dmitry Bogdanov Date: Tue, 10 Mar 2020 18:22:24 +0300 Subject: net: macsec: update SCI upon MAC address change. SCI should be updated, because it contains MAC in its first 6 octets. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Dmitry Bogdanov Signed-off-by: Mark Starovoytov Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/macsec.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index 5af424eeea86..66c6392251bc 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -424,6 +424,11 @@ static struct macsec_eth_header *macsec_ethhdr(struct sk_buff *skb) return (struct macsec_eth_header *)skb_mac_header(skb); } +static sci_t dev_to_sci(struct net_device *dev, __be16 port) +{ + return make_sci(dev->dev_addr, port); +} + static void __macsec_pn_wrapped(struct macsec_secy *secy, struct macsec_tx_sa *tx_sa) { @@ -3268,6 +3273,7 @@ static int macsec_set_mac_address(struct net_device *dev, void *p) out: ether_addr_copy(dev->dev_addr, addr->sa_data); + macsec->secy.sci = dev_to_sci(dev, MACSEC_PORT_ES); return 0; } @@ -3593,11 +3599,6 @@ static bool sci_exists(struct net_device *dev, sci_t sci) return false; } -static sci_t dev_to_sci(struct net_device *dev, __be16 port) -{ - return make_sci(dev->dev_addr, port); -} - static int macsec_add_dev(struct net_device *dev, sci_t sci, u8 icv_len) { struct macsec_dev *macsec = macsec_priv(dev); -- cgit v1.2.3 From 09f4136c5d6b4c5144a965bd086009863d58ff08 Mon Sep 17 00:00:00 2001 From: Dmitry Bogdanov Date: Tue, 10 Mar 2020 18:22:25 +0300 Subject: net: macsec: invoke mdo_upd_secy callback when mac address changed Notify the offload engine about MAC address change to reconfigure it accordingly. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Dmitry Bogdanov Signed-off-by: Mark Starovoytov Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/macsec.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index 66c6392251bc..6ec6fc191a6e 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -3274,6 +3274,19 @@ static int macsec_set_mac_address(struct net_device *dev, void *p) out: ether_addr_copy(dev->dev_addr, addr->sa_data); macsec->secy.sci = dev_to_sci(dev, MACSEC_PORT_ES); + + /* If h/w offloading is available, propagate to the device */ + if (macsec_is_offloaded(macsec)) { + const struct macsec_ops *ops; + struct macsec_context ctx; + + ops = macsec_get_ops(macsec, &ctx); + if (ops) { + ctx.secy = &macsec->secy; + macsec_offload(ops->mdo_upd_secy, &ctx); + } + } + return 0; } -- cgit v1.2.3 From 7395f62d95aafacdb9bd4996ec2f95b4a655d7e6 Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Tue, 10 Mar 2020 15:06:54 -0700 Subject: dpaa_eth: Remove unnecessary boolean expression in dpaa_get_headroom Clang warns: drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:2860:9: warning: converting the result of '?:' with integer constants to a boolean always evaluates to 'true' [-Wtautological-constant-compare] return DPAA_FD_DATA_ALIGNMENT ? ALIGN(headroom, ^ drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:131:34: note: expanded from macro 'DPAA_FD_DATA_ALIGNMENT' \#define DPAA_FD_DATA_ALIGNMENT (fman_has_errata_a050385() ? 64 : 16) ^ 1 warning generated. This was exposed by commit 3c68b8fffb48 ("dpaa_eth: FMan erratum A050385 workaround") even though it appears to have been an issue since the introductory commit 9ad1a3749333 ("dpaa_eth: add support for DPAA Ethernet") since DPAA_FD_DATA_ALIGNMENT has never been able to be zero. Just replace the whole boolean expression with the true branch, as it is always been true. Link: https://github.com/ClangBuiltLinux/linux/issues/928 Signed-off-by: Nathan Chancellor Reviewed-by: Madalin Bucur Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c index e3ac9ec54c7c..ca74a684a904 100644 --- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c @@ -2845,9 +2845,7 @@ static inline u16 dpaa_get_headroom(struct dpaa_buffer_layout *bl) headroom = (u16)(bl->priv_data_size + DPAA_PARSE_RESULTS_SIZE + DPAA_TIME_STAMP_SIZE + DPAA_HASH_RESULTS_SIZE); - return DPAA_FD_DATA_ALIGNMENT ? ALIGN(headroom, - DPAA_FD_DATA_ALIGNMENT) : - headroom; + return ALIGN(headroom, DPAA_FD_DATA_ALIGNMENT); } static int dpaa_eth_probe(struct platform_device *pdev) -- cgit v1.2.3 From ab14961d10d02d20767612c78ce148f6eb85bd58 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Tue, 10 Mar 2020 20:36:16 -0700 Subject: net: fec: validate the new settings in fec_enet_set_coalesce() fec_enet_set_coalesce() validates the previously set params and if they are within range proceeds to apply the new ones. The new ones, however, are not validated. This seems backwards, probably a copy-paste error? Compile tested only. Fixes: d851b47b22fc ("net: fec: add interrupt coalescence feature support") Signed-off-by: Jakub Kicinski Acked-by: Fugang Duan Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 4432a59904c7..23c5fef2f1ad 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -2529,15 +2529,15 @@ fec_enet_set_coalesce(struct net_device *ndev, struct ethtool_coalesce *ec) return -EINVAL; } - cycle = fec_enet_us_to_itr_clock(ndev, fep->rx_time_itr); + cycle = fec_enet_us_to_itr_clock(ndev, ec->rx_coalesce_usecs); if (cycle > 0xFFFF) { dev_err(dev, "Rx coalesced usec exceed hardware limitation\n"); return -EINVAL; } - cycle = fec_enet_us_to_itr_clock(ndev, fep->tx_time_itr); + cycle = fec_enet_us_to_itr_clock(ndev, ec->tx_coalesce_usecs); if (cycle > 0xFFFF) { - dev_err(dev, "Rx coalesced usec exceed hardware limitation\n"); + dev_err(dev, "Tx coalesced usec exceed hardware limitation\n"); return -EINVAL; } -- cgit v1.2.3 From f3cc008bf6d59b8d93b4190e01d3e557b0040e15 Mon Sep 17 00:00:00 2001 From: Dominik Czarnota Date: Mon, 9 Mar 2020 16:22:50 +0100 Subject: sxgbe: Fix off by one in samsung driver strncpy size arg This patch fixes an off-by-one error in strncpy size argument in drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c. The issue is that in: strncmp(opt, "eee_timer:", 6) the passed string literal: "eee_timer:" has 10 bytes (without the NULL byte) and the passed size argument is 6. As a result, the logic will also accept other, malformed strings, e.g. "eee_tiXXX:". This bug doesn't seem to have any security impact since its present in module's cmdline parsing code. Signed-off-by: Dominik Czarnota Signed-off-by: David S. Miller --- drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c index c705743d69f7..2cc8184b7e6b 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c @@ -2277,7 +2277,7 @@ static int __init sxgbe_cmdline_opt(char *str) if (!str || !*str) return -EINVAL; while ((opt = strsep(&str, ",")) != NULL) { - if (!strncmp(opt, "eee_timer:", 6)) { + if (!strncmp(opt, "eee_timer:", 10)) { if (kstrtoint(opt + 10, 0, &eee_timer)) goto err; } -- cgit v1.2.3 From 012fc74517b25177dfede2ed45cd108258564e4a Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 11 Mar 2020 21:02:31 +0100 Subject: net: dsa: mv88e6xxx: Add missing mask of ATU occupancy register Only the bottom 12 bits contain the ATU bin occupancy statistics. The upper bits need masking off. Fixes: e0c69ca7dfbb ("net: dsa: mv88e6xxx: Add ATU occupancy via devlink resources") Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 8c9289549688..2f993e673ec7 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -2769,6 +2769,8 @@ static u64 mv88e6xxx_devlink_atu_bin_get(struct mv88e6xxx_chip *chip, goto unlock; } + occupancy &= MV88E6XXX_G2_ATU_STATS_MASK; + unlock: mv88e6xxx_reg_unlock(chip); -- cgit v1.2.3 From e1f550dc44a4d535da4e25ada1b0eaf8f3417929 Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Thu, 12 Mar 2020 09:05:46 +1300 Subject: net: mvmdio: avoid error message for optional IRQ Per the dt-binding the interrupt is optional so use platform_get_irq_optional() instead of platform_get_irq(). Since commit 7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()") platform_get_irq() produces an error message orion-mdio f1072004.mdio: IRQ index 0 not found which is perfectly normal if one hasn't specified the optional property in the device tree. Signed-off-by: Chris Packham Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvmdio.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c index 0b9e851f3da4..d2e2dc538428 100644 --- a/drivers/net/ethernet/marvell/mvmdio.c +++ b/drivers/net/ethernet/marvell/mvmdio.c @@ -347,7 +347,7 @@ static int orion_mdio_probe(struct platform_device *pdev) } - dev->err_interrupt = platform_get_irq(pdev, 0); + dev->err_interrupt = platform_get_irq_optional(pdev, 0); if (dev->err_interrupt > 0 && resource_size(r) < MVMDIO_ERR_INT_MASK + 4) { dev_err(&pdev->dev, @@ -364,8 +364,8 @@ static int orion_mdio_probe(struct platform_device *pdev) writel(MVMDIO_ERR_INT_SMI_DONE, dev->regs + MVMDIO_ERR_INT_MASK); - } else if (dev->err_interrupt == -EPROBE_DEFER) { - ret = -EPROBE_DEFER; + } else if (dev->err_interrupt < 0) { + ret = dev->err_interrupt; goto out_mdio; } -- cgit v1.2.3 From 5eb01ddfcfb25e6ebc404a41deae946bde776731 Mon Sep 17 00:00:00 2001 From: Yonglong Liu Date: Thu, 12 Mar 2020 15:11:03 +0800 Subject: net: hns3: fix "tc qdisc del" failed issue The HNS3 driver supports to configure TC numbers and TC to priority map via "tc" tool. But when delete the rule, will fail, because the HNS3 driver needs at least one TC, but the "tc" tool sets TC number to zero when delete. This patch makes sure that the TC number is at least one. Fixes: 30d240dfa2e8 ("net: hns3: Add mqprio hardware offload support in hns3 driver") Signed-off-by: Yonglong Liu Signed-off-by: Huazhong Tan Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index acb796cc10d0..a7f40aa1a0ea 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -1711,7 +1711,7 @@ static int hns3_setup_tc(struct net_device *netdev, void *type_data) netif_dbg(h, drv, netdev, "setup tc: num_tc=%u\n", tc); return (kinfo->dcb_ops && kinfo->dcb_ops->setup_tc) ? - kinfo->dcb_ops->setup_tc(h, tc, prio_tc) : -EOPNOTSUPP; + kinfo->dcb_ops->setup_tc(h, tc ? tc : 1, prio_tc) : -EOPNOTSUPP; } static int hns3_nic_setup_tc(struct net_device *dev, enum tc_setup_type type, -- cgit v1.2.3 From 23b4201dead410c4a5108a8e723240419ab75257 Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Thu, 12 Mar 2020 15:11:04 +0800 Subject: net: hns3: fix VF VLAN table entries inconsistent issue Currently, if VF is loaded on the host side, the host doesn't clear the VF's VLAN table entries when VF removing. In this case, when doing reset and disabling sriov at the same time the VLAN device over VF will be removed, but the VLAN table entries in hardware are remained. This patch fixes it by asking PF to clear the VLAN table entries for VF when VF is removing. It also clears the VLAN table full bit after VF VLAN table entries being cleared. Fixes: c6075b193462 ("net: hns3: Record VF vlan tables") Signed-off-by: Jian Shen Signed-off-by: Huazhong Tan Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h | 1 + drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1 + drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 1 + drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 3 +++ 4 files changed, 6 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h b/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h index 1b0313900f98..d87158acdf6f 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h +++ b/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h @@ -46,6 +46,7 @@ enum HCLGE_MBX_OPCODE { HCLGE_MBX_PUSH_VLAN_INFO, /* (PF -> VF) push port base vlan */ HCLGE_MBX_GET_MEDIA_TYPE, /* (VF -> PF) get media type */ HCLGE_MBX_PUSH_PROMISC_INFO, /* (PF -> VF) push vf promisc info */ + HCLGE_MBX_VF_UNINIT, /* (VF -> PF) vf is unintializing */ HCLGE_MBX_GET_VF_FLR_STATUS = 200, /* (M7 -> PF) get vf flr status */ HCLGE_MBX_PUSH_LINK_STATUS, /* (M7 -> PF) get port link status */ diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index acf0c29fcbcd..6deeb964ea6b 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -8272,6 +8272,7 @@ void hclge_rm_vport_all_vlan_table(struct hclge_vport *vport, bool is_del_list) kfree(vlan); } } + clear_bit(vport->vport_id, hdev->vf_vlan_full); } void hclge_uninit_vport_vlan_table(struct hclge_dev *hdev) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c index a3c0822191a9..3d850f6b1e37 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c @@ -799,6 +799,7 @@ void hclge_mbx_handler(struct hclge_dev *hdev) hclge_get_link_mode(vport, req); break; case HCLGE_MBX_GET_VF_FLR_STATUS: + case HCLGE_MBX_VF_UNINIT: hclge_rm_vport_all_mac_table(vport, true, HCLGE_MAC_ADDR_UC); hclge_rm_vport_all_mac_table(vport, true, diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c index d6597206e692..0510d85a7f6a 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c @@ -2803,6 +2803,9 @@ static void hclgevf_uninit_hdev(struct hclgevf_dev *hdev) { hclgevf_state_uninit(hdev); + hclgevf_send_mbx_msg(hdev, HCLGE_MBX_VF_UNINIT, 0, NULL, 0, + false, NULL, 0); + if (test_bit(HCLGEVF_STATE_IRQ_INITED, &hdev->state)) { hclgevf_misc_irq_uninit(hdev); hclgevf_uninit_msi(hdev); -- cgit v1.2.3 From 903b85d3adce99a5301d5959c4d3c9d14a7974d4 Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Thu, 12 Mar 2020 15:11:05 +0800 Subject: net: hns3: fix RMW issue for VLAN filter switch According to the user manual, the ingress and egress VLAN filter are configured at the same time. Currently, hclge_init_vlan_config() and hclge_set_vlan_spoofchk() will both change the VLAN filter switch. So it's necessary to read the old configuration before modifying it. Fixes: 22044f95faa0 ("net: hns3: add support for spoof check setting") Signed-off-by: Jian Shen Signed-off-by: Huazhong Tan Signed-off-by: David S. Miller --- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 6deeb964ea6b..06d0ed0fe4c9 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -7745,16 +7745,27 @@ static int hclge_set_vlan_filter_ctrl(struct hclge_dev *hdev, u8 vlan_type, struct hclge_desc desc; int ret; - hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_VLAN_FILTER_CTRL, false); - + /* read current vlan filter parameter */ + hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_VLAN_FILTER_CTRL, true); req = (struct hclge_vlan_filter_ctrl_cmd *)desc.data; req->vlan_type = vlan_type; - req->vlan_fe = filter_en ? fe_type : 0; req->vf_id = vf_id; + ret = hclge_cmd_send(&hdev->hw, &desc, 1); + if (ret) { + dev_err(&hdev->pdev->dev, + "failed to get vlan filter config, ret = %d.\n", ret); + return ret; + } + + /* modify and write new config parameter */ + hclge_cmd_reuse_desc(&desc, false); + req->vlan_fe = filter_en ? + (req->vlan_fe | fe_type) : (req->vlan_fe & ~fe_type); + ret = hclge_cmd_send(&hdev->hw, &desc, 1); if (ret) - dev_err(&hdev->pdev->dev, "set vlan filter fail, ret =%d.\n", + dev_err(&hdev->pdev->dev, "failed to set vlan filter, ret = %d.\n", ret); return ret; -- cgit v1.2.3 From 59359fc8a2f7af062777692e6a7aae73483729ec Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Thu, 12 Mar 2020 15:11:06 +0800 Subject: net: hns3: clear port base VLAN when unload PF Currently, PF missed to clear the port base VLAN for VF when unload. In this case, the VLAN id will remain in the VLAN table. This patch fixes it. Fixes: 92f11ea177cd ("net: hns3: fix set port based VLAN issue for VF") Signed-off-by: Jian Shen Signed-off-by: Huazhong Tan Signed-off-by: David S. Miller --- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 06d0ed0fe4c9..d3b0cd74ecd2 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -8500,6 +8500,28 @@ static int hclge_set_vf_vlan_filter(struct hnae3_handle *handle, int vfid, } } +static void hclge_clear_vf_vlan(struct hclge_dev *hdev) +{ + struct hclge_vlan_info *vlan_info; + struct hclge_vport *vport; + int ret; + int vf; + + /* clear port base vlan for all vf */ + for (vf = HCLGE_VF_VPORT_START_NUM; vf < hdev->num_alloc_vport; vf++) { + vport = &hdev->vport[vf]; + vlan_info = &vport->port_base_vlan_cfg.vlan_info; + + ret = hclge_set_vlan_filter_hw(hdev, htons(ETH_P_8021Q), + vport->vport_id, + vlan_info->vlan_tag, true); + if (ret) + dev_err(&hdev->pdev->dev, + "failed to clear vf vlan for vf%d, ret = %d\n", + vf - HCLGE_VF_VPORT_START_NUM, ret); + } +} + int hclge_set_vlan_filter(struct hnae3_handle *handle, __be16 proto, u16 vlan_id, bool is_kill) { @@ -9909,6 +9931,7 @@ static void hclge_uninit_ae_dev(struct hnae3_ae_dev *ae_dev) struct hclge_mac *mac = &hdev->hw.mac; hclge_reset_vf_rate(hdev); + hclge_clear_vf_vlan(hdev); hclge_misc_affinity_teardown(hdev); hclge_state_uninit(hdev); -- cgit v1.2.3 From 611d779af7cad2b87487ff58e4931a90c20b113c Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Thu, 12 Mar 2020 22:25:20 +0100 Subject: net: phy: fix MDIO bus PM PHY resuming So far we have the unfortunate situation that mdio_bus_phy_may_suspend() is called in suspend AND resume path, assuming that function result is the same. After the original change this is no longer the case, resulting in broken resume as reported by Geert. To fix this call mdio_bus_phy_may_suspend() in the suspend path only, and let the phy_device store the info whether it was suspended by MDIO bus PM. Fixes: 503ba7c69610 ("net: phy: Avoid multiple suspends") Reported-by: Geert Uytterhoeven Tested-by: Geert Uytterhoeven Signed-off-by: Heiner Kallweit Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 6 +++++- include/linux/phy.h | 2 ++ 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index c8b0c34030d3..28e3c5c0e3c3 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -286,6 +286,8 @@ static int mdio_bus_phy_suspend(struct device *dev) if (!mdio_bus_phy_may_suspend(phydev)) return 0; + phydev->suspended_by_mdio_bus = 1; + return phy_suspend(phydev); } @@ -294,9 +296,11 @@ static int mdio_bus_phy_resume(struct device *dev) struct phy_device *phydev = to_phy_device(dev); int ret; - if (!mdio_bus_phy_may_suspend(phydev)) + if (!phydev->suspended_by_mdio_bus) goto no_resume; + phydev->suspended_by_mdio_bus = 0; + ret = phy_resume(phydev); if (ret < 0) return ret; diff --git a/include/linux/phy.h b/include/linux/phy.h index 22f5e763e894..452e8ba8665f 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -357,6 +357,7 @@ struct macsec_ops; * is_gigabit_capable: Set to true if PHY supports 1000Mbps * has_fixups: Set to true if this phy has fixups/quirks. * suspended: Set to true if this phy has been suspended successfully. + * suspended_by_mdio_bus: Set to true if this phy was suspended by MDIO bus. * sysfs_links: Internal boolean tracking sysfs symbolic links setup/removal. * loopback_enabled: Set true if this phy has been loopbacked successfully. * state: state of the PHY for management purposes @@ -396,6 +397,7 @@ struct phy_device { unsigned is_gigabit_capable:1; unsigned has_fixups:1; unsigned suspended:1; + unsigned suspended_by_mdio_bus:1; unsigned sysfs_links:1; unsigned loopback_enabled:1; -- cgit v1.2.3 From c0368595c1639947839c0db8294ee96aca0b3b86 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 12 Mar 2020 15:04:30 +0000 Subject: net: systemport: fix index check to avoid an array out of bounds access Currently the bounds check on index is off by one and can lead to an out of bounds access on array priv->filters_loc when index is RXCHK_BRCM_TAG_MAX. Fixes: bb9051a2b230 ("net: systemport: Add support for WAKE_FILTER") Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bcmsysport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c index e0611cba87f9..15b31cddc054 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.c +++ b/drivers/net/ethernet/broadcom/bcmsysport.c @@ -2135,7 +2135,7 @@ static int bcm_sysport_rule_set(struct bcm_sysport_priv *priv, return -ENOSPC; index = find_first_zero_bit(priv->filters, RXCHK_BRCM_TAG_MAX); - if (index > RXCHK_BRCM_TAG_MAX) + if (index >= RXCHK_BRCM_TAG_MAX) return -ENOSPC; /* Location is the classification ID, and index is the position -- cgit v1.2.3