From 0d60fd50328a96a901b09ed653704ce7f41d15ce Mon Sep 17 00:00:00 2001
From: Gerhard Engleder <gerhard@engleder-embedded.com>
Date: Wed, 12 Mar 2025 21:30:07 +0100
Subject: net: phy: Support speed selection for PHY loopback
phy_loopback() leaves it to the PHY driver to select the speed of the
loopback mode. Thus, the speed of the loopback mode depends on the PHY
driver in use.
Add support for speed selection to phy_loopback() to enable loopback
with defined speeds. Ensure that link up is signaled if speed changes
as speed is not allowed to change during link up. Link down and up is
necessary for a new speed.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://patch.msgid.link/20250312203010.47429-3-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
---
drivers/net/phy/phy_device.c | 35 -----------------------------------
1 file changed, 35 deletions(-)
(limited to 'drivers/net/phy/phy_device.c')
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 09864c9635ac..675fbd225378 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1818,41 +1818,6 @@ int phy_resume(struct phy_device *phydev)
}
EXPORT_SYMBOL(phy_resume);
-int phy_loopback(struct phy_device *phydev, bool enable)
-{
- int ret = 0;
-
- if (!phydev->drv)
- return -EIO;
-
- mutex_lock(&phydev->lock);
-
- if (enable && phydev->loopback_enabled) {
- ret = -EBUSY;
- goto out;
- }
-
- if (!enable && !phydev->loopback_enabled) {
- ret = -EINVAL;
- goto out;
- }
-
- if (phydev->drv->set_loopback)
- ret = phydev->drv->set_loopback(phydev, enable, 0);
- else
- ret = genphy_loopback(phydev, enable, 0);
-
- if (ret)
- goto out;
-
- phydev->loopback_enabled = enable;
-
-out:
- mutex_unlock(&phydev->lock);
- return ret;
-}
-EXPORT_SYMBOL(phy_loopback);
-
/**
* phy_reset_after_clk_enable - perform a PHY reset if needed
* @phydev: target phy_device struct
--
cgit v1.2.3