From cdb138080b78146d1cdadba9f5dadbeb97445b91 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Wed, 28 Jul 2010 10:59:06 +0200 Subject: pcmcia: do not use win_req_t when calling pcmcia_request_window() Instead of win_req_t, drivers are now requested to fill out struct pcmcia_device *p_dev->resource[2,3,4,5] for up to four iomem ranges. After a call to pcmcia_request_window(), the windows found there are reserved and may be used until pcmcia_release_window() is called. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-mtd@lists.infradead.org CC: Jiri Kosina CC: linux-scsi@vger.kernel.org Tested-by: Wolfram Sang Signed-off-by: Dominik Brodowski --- drivers/mtd/maps/pcmciamtd.c | 53 ++++++++++++++++++++++++-------------------- 1 file changed, 29 insertions(+), 24 deletions(-) (limited to 'drivers/mtd/maps/pcmciamtd.c') diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c index e9ca5ba7d9d2..fb3c5380aa84 100644 --- a/drivers/mtd/maps/pcmciamtd.c +++ b/drivers/mtd/maps/pcmciamtd.c @@ -101,7 +101,7 @@ MODULE_PARM_DESC(mem_type, "Set Memory type (0=Flash, 1=RAM, 2=ROM, default=0)") static caddr_t remap_window(struct map_info *map, unsigned long to) { struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1; - window_handle_t win = (window_handle_t)map->map_priv_2; + struct resource *win = (struct resource *) map->map_priv_2; unsigned int offset; int ret; @@ -339,7 +339,7 @@ static void pcmciamtd_release(struct pcmcia_device *link) DEBUG(3, "link = 0x%p", link); - if (link->win) { + if (link->resource[2]->end) { if(dev->win_base) { iounmap(dev->win_base); dev->win_base = NULL; @@ -491,9 +491,8 @@ static int pcmciamtd_config(struct pcmcia_device *link) { struct pcmciamtd_dev *dev = link->priv; struct mtd_info *mtd = NULL; - win_req_t req; int ret; - int i; + int i, j = 0; static char *probes[] = { "jedec_probe", "cfi_probe" }; int new_name = 0; @@ -520,28 +519,34 @@ static int pcmciamtd_config(struct pcmcia_device *link) * smaller windows until we succeed */ - req.Attributes = WIN_MEMORY_TYPE_CM | WIN_ENABLE; - req.Attributes |= (dev->pcmcia_map.bankwidth == 1) ? WIN_DATA_WIDTH_8 : WIN_DATA_WIDTH_16; - req.Base = 0; - req.AccessSpeed = mem_speed; - link->win = (window_handle_t)link; - req.Size = (force_size) ? force_size << 20 : MAX_PCMCIA_ADDR; + link->resource[2]->flags |= WIN_MEMORY_TYPE_CM | WIN_ENABLE; + link->resource[2]->flags |= (dev->pcmcia_map.bankwidth == 1) ? + WIN_DATA_WIDTH_8 : WIN_DATA_WIDTH_16; + link->resource[2]->start = 0; + link->resource[2]->end = (force_size) ? force_size << 20 : + MAX_PCMCIA_ADDR; dev->win_size = 0; do { int ret; - DEBUG(2, "requesting window with size = %dKiB memspeed = %d", - req.Size >> 10, req.AccessSpeed); - ret = pcmcia_request_window(link, &req, &link->win); + DEBUG(2, "requesting window with size = %luKiB memspeed = %d", + (unsigned long) resource_size(link->resource[2]) >> 10, + mem_speed); + ret = pcmcia_request_window(link, link->resource[2], mem_speed); DEBUG(2, "ret = %d dev->win_size = %d", ret, dev->win_size); if(ret) { - req.Size >>= 1; + j++; + link->resource[2]->start = 0; + link->resource[2]->end = (force_size) ? + force_size << 20 : MAX_PCMCIA_ADDR; + link->resource[2]->end >>= j; } else { - DEBUG(2, "Got window of size %dKiB", req.Size >> 10); - dev->win_size = req.Size; + DEBUG(2, "Got window of size %luKiB", (unsigned long) + resource_size(link->resource[2]) >> 10); + dev->win_size = resource_size(link->resource[2]); break; } - } while(req.Size >= 0x1000); + } while (link->resource[2]->end >= 0x1000); DEBUG(2, "dev->win_size = %d", dev->win_size); @@ -553,20 +558,20 @@ static int pcmciamtd_config(struct pcmcia_device *link) DEBUG(1, "Allocated a window of %dKiB", dev->win_size >> 10); /* Get write protect status */ - DEBUG(2, "window handle = 0x%8.8lx", (unsigned long)link->win); - dev->win_base = ioremap(req.Base, req.Size); + dev->win_base = ioremap(link->resource[2]->start, + resource_size(link->resource[2])); if(!dev->win_base) { - dev_err(&dev->p_dev->dev, "ioremap(%lu, %u) failed\n", - req.Base, req.Size); + dev_err(&dev->p_dev->dev, "ioremap(%pR) failed\n", + link->resource[2]); pcmciamtd_release(link); return -ENODEV; } - DEBUG(1, "mapped window dev = %p req.base = 0x%lx base = %p size = 0x%x", - dev, req.Base, dev->win_base, req.Size); + DEBUG(1, "mapped window dev = %p @ %pR, base = %p", + dev, link->resource[2], dev->win_base); dev->offset = 0; dev->pcmcia_map.map_priv_1 = (unsigned long)dev; - dev->pcmcia_map.map_priv_2 = (unsigned long)link->win; + dev->pcmcia_map.map_priv_2 = (unsigned long)link->resource[2]; dev->vpp = (vpp) ? vpp : link->socket->socket.Vpp; link->conf.Attributes = 0; -- cgit v1.2.3 From fb49fa533f9d211994c33efb752ffa5b30033729 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Thu, 29 Jul 2010 14:06:42 +0200 Subject: pcmcia: split up modify_configuration() into two fixup functions pcmcia_modify_configuration() was only used by two drivers to fix up one issue each: setting the Vpp to a different value, and reducing the IO width to 8 bit. Introduce two explicitly named functions handling these things, and remove one further typedef. CC: netdev@vger.kernel.org CC: linux-mtd@lists.infradead.org Tested-by: Wolfram Sang Signed-off-by: Dominik Brodowski --- drivers/mtd/maps/pcmciamtd.c | 8 +-- drivers/net/pcmcia/smc91c92_cs.c | 5 +- drivers/pcmcia/pcmcia_resource.c | 128 +++++++++++++++++++-------------------- include/pcmcia/cs.h | 13 ---- include/pcmcia/ds.h | 4 +- 5 files changed, 68 insertions(+), 90 deletions(-) (limited to 'drivers/mtd/maps/pcmciamtd.c') diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c index fb3c5380aa84..31ce404baa3c 100644 --- a/drivers/mtd/maps/pcmciamtd.c +++ b/drivers/mtd/maps/pcmciamtd.c @@ -316,15 +316,9 @@ static void pcmciamtd_set_vpp(struct map_info *map, int on) { struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1; struct pcmcia_device *link = dev->p_dev; - modconf_t mod; - int ret; - - mod.Attributes = CONF_VPP1_CHANGE_VALID | CONF_VPP2_CHANGE_VALID; - mod.Vcc = 0; - mod.Vpp1 = mod.Vpp2 = on ? dev->vpp : 0; DEBUG(2, "dev = %p on = %d vpp = %d\n", dev, on, dev->vpp); - ret = pcmcia_modify_configuration(link, &mod); + pcmcia_fixup_vpp(link, on ? dev->vpp : 0); } diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index acc680739c89..395e586d7c0a 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -816,13 +816,10 @@ static int check_sig(struct pcmcia_device *link) } if (width) { - modconf_t mod = { - .Attributes = CONF_IO_CHANGE_WIDTH, - }; printk(KERN_INFO "smc91c92_cs: using 8-bit IO window.\n"); smc91c92_suspend(link); - pcmcia_modify_configuration(link, &mod); + pcmcia_fixup_iowidth(link); smc91c92_resume(link); return check_sig(link); } diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index bf16a1cf7399..14b1a951e1b6 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -226,92 +226,90 @@ int pcmcia_map_mem_page(struct pcmcia_device *p_dev, struct resource *res, EXPORT_SYMBOL(pcmcia_map_mem_page); -/** pcmcia_modify_configuration +/** + * pcmcia_fixup_iowidth() - reduce io width to 8bit * - * Modify a locked socket configuration + * pcmcia_fixup_iowidth() allows a PCMCIA device driver to reduce the + * IO width to 8bit after having called pcmcia_request_configuration() + * previously. */ -int pcmcia_modify_configuration(struct pcmcia_device *p_dev, - modconf_t *mod) +int pcmcia_fixup_iowidth(struct pcmcia_device *p_dev) { - struct pcmcia_socket *s; - config_t *c; - int ret; - - s = p_dev->socket; + struct pcmcia_socket *s = p_dev->socket; + pccard_io_map io_off = { 0, 0, 0, 0, 1 }; + pccard_io_map io_on; + int i, ret = 0; mutex_lock(&s->ops_mutex); - c = p_dev->function_config; - if (!(s->state & SOCKET_PRESENT)) { - dev_dbg(&p_dev->dev, "No card present\n"); - ret = -ENODEV; - goto unlock; - } - if (!(c->state & CONFIG_LOCKED)) { - dev_dbg(&p_dev->dev, "Configuration isnt't locked\n"); + dev_dbg(&p_dev->dev, "fixup iowidth to 8bit\n"); + + if (!(s->state & SOCKET_PRESENT) || + !(p_dev->function_config->state & CONFIG_LOCKED)) { + dev_dbg(&p_dev->dev, "No card? Config not locked?\n"); ret = -EACCES; goto unlock; } - if (mod->Attributes & (CONF_IRQ_CHANGE_VALID | CONF_VCC_CHANGE_VALID)) { - dev_dbg(&p_dev->dev, - "changing Vcc or IRQ is not allowed at this time\n"); - ret = -EINVAL; - goto unlock; - } + io_on.speed = io_speed; + for (i = 0; i < MAX_IO_WIN; i++) { + if (!s->io[i].res) + continue; + io_off.map = i; + io_on.map = i; - /* We only allow changing Vpp1 and Vpp2 to the same value */ - if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) && - (mod->Attributes & CONF_VPP2_CHANGE_VALID)) { - if (mod->Vpp1 != mod->Vpp2) { - dev_dbg(&p_dev->dev, - "Vpp1 and Vpp2 must be the same\n"); - ret = -EINVAL; - goto unlock; - } - s->socket.Vpp = mod->Vpp1; - if (s->ops->set_socket(s, &s->socket)) { - dev_printk(KERN_WARNING, &p_dev->dev, - "Unable to set VPP\n"); - ret = -EIO; - goto unlock; - } - } else if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) || - (mod->Attributes & CONF_VPP2_CHANGE_VALID)) { - dev_dbg(&p_dev->dev, - "changing Vcc is not allowed at this time\n"); - ret = -EINVAL; - goto unlock; + io_on.flags = MAP_ACTIVE | IO_DATA_PATH_WIDTH_8; + io_on.start = s->io[i].res->start; + io_on.stop = s->io[i].res->end; + + s->ops->set_io_map(s, &io_off); + mdelay(40); + s->ops->set_io_map(s, &io_on); } +unlock: + mutex_unlock(&s->ops_mutex); - if (mod->Attributes & CONF_IO_CHANGE_WIDTH) { - pccard_io_map io_off = { 0, 0, 0, 0, 1 }; - pccard_io_map io_on; - int i; + return ret; +} +EXPORT_SYMBOL(pcmcia_fixup_iowidth); - io_on.speed = io_speed; - for (i = 0; i < MAX_IO_WIN; i++) { - if (!s->io[i].res) - continue; - io_off.map = i; - io_on.map = i; - io_on.flags = MAP_ACTIVE | IO_DATA_PATH_WIDTH_8; - io_on.start = s->io[i].res->start; - io_on.stop = s->io[i].res->end; +/** + * pcmcia_fixup_vpp() - set Vpp to a new voltage level + * + * pcmcia_fixup_vpp() allows a PCMCIA device driver to set Vpp to + * a new voltage level between calls to pcmcia_request_configuration() + * and pcmcia_disable_device(). + */ +int pcmcia_fixup_vpp(struct pcmcia_device *p_dev, unsigned char new_vpp) +{ + struct pcmcia_socket *s = p_dev->socket; + int ret = 0; - s->ops->set_io_map(s, &io_off); - mdelay(40); - s->ops->set_io_map(s, &io_on); - } + mutex_lock(&s->ops_mutex); + + dev_dbg(&p_dev->dev, "fixup Vpp to %d\n", new_vpp); + + if (!(s->state & SOCKET_PRESENT) || + !(p_dev->function_config->state & CONFIG_LOCKED)) { + dev_dbg(&p_dev->dev, "No card? Config not locked?\n"); + ret = -EACCES; + goto unlock; } - ret = 0; + + s->socket.Vpp = new_vpp; + if (s->ops->set_socket(s, &s->socket)) { + dev_warn(&p_dev->dev, "Unable to set VPP\n"); + ret = -EIO; + goto unlock; + } + unlock: mutex_unlock(&s->ops_mutex); return ret; -} /* modify_configuration */ -EXPORT_SYMBOL(pcmcia_modify_configuration); +} +EXPORT_SYMBOL(pcmcia_fixup_vpp); int pcmcia_release_configuration(struct pcmcia_device *p_dev) diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h index 63cb9bbe390e..e13d0cd3f8f7 100644 --- a/include/pcmcia/cs.h +++ b/include/pcmcia/cs.h @@ -19,19 +19,6 @@ #include #endif -/* ModifyConfiguration */ -typedef struct modconf_t { - u_int Attributes; - u_int Vcc, Vpp1, Vpp2; -} modconf_t; - -/* Attributes for ModifyConfiguration */ -#define CONF_IRQ_CHANGE_VALID 0x0100 -#define CONF_VCC_CHANGE_VALID 0x0200 -#define CONF_VPP1_CHANGE_VALID 0x0400 -#define CONF_VPP2_CHANGE_VALID 0x0800 -#define CONF_IO_CHANGE_WIDTH 0x1000 - /* For RequestConfiguration */ typedef struct config_req_t { u_int Attributes; diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h index 6f7cb38d8850..8e307b93f47b 100644 --- a/include/pcmcia/ds.h +++ b/include/pcmcia/ds.h @@ -212,7 +212,9 @@ int pcmcia_release_window(struct pcmcia_device *p_dev, struct resource *res); int pcmcia_map_mem_page(struct pcmcia_device *p_dev, struct resource *res, unsigned int offset); -int pcmcia_modify_configuration(struct pcmcia_device *p_dev, modconf_t *mod); +int pcmcia_fixup_vpp(struct pcmcia_device *p_dev, unsigned char new_vpp); +int pcmcia_fixup_iowidth(struct pcmcia_device *p_dev); + void pcmcia_disable_device(struct pcmcia_device *p_dev); /* IO ports */ -- cgit v1.2.3 From e8405f0f617856de0ceb7d04e65b663051451544 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Thu, 29 Jul 2010 15:50:55 +0200 Subject: pcmcia: move Vpp setup to struct pcmcia_device Some drivers prefer to explicitly set Vpp. Instead of passing the voltage inside config_req_t, store it in struct pcmcia_device. CC: linux-ide@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-mtd@lists.infradead.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org CC: linux-usb@vger.kernel.org CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan (for drivers/bluetooth) Tested-by: Wolfram Sang Signed-off-by: Dominik Brodowski --- drivers/ata/pata_pcmcia.c | 4 ++-- drivers/bluetooth/bt3c_cs.c | 2 +- drivers/bluetooth/btuart_cs.c | 2 +- drivers/ide/ide-cs.c | 6 +++--- drivers/isdn/hisax/sedlbauer_cs.c | 8 ++++---- drivers/mtd/maps/pcmciamtd.c | 4 ++-- drivers/net/wireless/airo_cs.c | 8 ++++---- drivers/net/wireless/atmel_cs.c | 4 ++-- drivers/net/wireless/hostap/hostap_cs.c | 10 +++++----- drivers/net/wireless/orinoco/orinoco_cs.c | 4 ++-- drivers/net/wireless/orinoco/spectrum_cs.c | 4 ++-- drivers/pcmcia/pcmcia_resource.c | 3 ++- drivers/scsi/pcmcia/nsp_cs.c | 8 ++++---- drivers/serial/serial_cs.c | 2 +- drivers/usb/host/sl811_cs.c | 8 ++++---- include/pcmcia/cs.h | 1 - include/pcmcia/ds.h | 1 + 17 files changed, 40 insertions(+), 39 deletions(-) (limited to 'drivers/mtd/maps/pcmciamtd.c') diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index e944aa0c5517..12cdc9ff39ad 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -194,9 +194,9 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev, } if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + pdev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; + pdev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index 7ab8f29d5e0d..2c8d981c110d 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -686,7 +686,7 @@ static int bt3c_check_config(struct pcmcia_device *p_dev, p_dev->io_lines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK; if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; + p_dev->vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) { p_dev->resource[0]->start = cf->io.win[0].base; diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index 1c4f5e863b03..7ea6fa42fdef 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -615,7 +615,7 @@ static int btuart_check_config(struct pcmcia_device *p_dev, p_dev->io_lines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK; if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; + p_dev->vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) { p_dev->resource[0]->start = cf->io.win[0].base; diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index 2a4cb9c18f01..82690e409435 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -221,9 +221,9 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev, } if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + pdev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; + pdev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; @@ -311,7 +311,7 @@ static int ide_config(struct pcmcia_device *link) info->host = host; dev_info(&link->dev, "ide-cs: hd%c: Vpp = %d.%d\n", 'a' + host->ports[0]->index * 2, - link->conf.Vpp / 10, link->conf.Vpp % 10); + link->vpp / 10, link->vpp % 10); kfree(stk); return 0; diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index a024192b672a..ad07d61dc09b 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -191,9 +191,9 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev, } if (cfg->vpp1.present & (1<conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; + p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; else if (dflt->vpp1.present & (1<conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; + p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; p_dev->conf.Attributes |= CONF_ENABLE_IRQ; @@ -257,8 +257,8 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link) /* Finally, report what we've done */ dev_info(&link->dev, "index 0x%02x:", link->conf.ConfigIndex); - if (link->conf.Vpp) - printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); + if (link->vpp) + printk(", Vpp %d.%d", link->vpp/10, link->vpp%10); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); if (link->resource[0]) diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c index 31ce404baa3c..ab94c8aebddc 100644 --- a/drivers/mtd/maps/pcmciamtd.c +++ b/drivers/mtd/maps/pcmciamtd.c @@ -570,9 +570,9 @@ static int pcmciamtd_config(struct pcmcia_device *link) dev->vpp = (vpp) ? vpp : link->socket->socket.Vpp; link->conf.Attributes = 0; if(setvpp == 2) { - link->conf.Vpp = dev->vpp; + link->vpp = dev->vpp; } else { - link->conf.Vpp = 0; + link->vpp = 0; } link->conf.IntType = INT_MEMORY; diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index 9a121a5b787c..488e7b45d54b 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -166,9 +166,9 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev, /* Use power settings for Vcc and Vpp if present */ /* Note that the CIS values need to be rescaled */ if (cfg->vpp1.present & (1<conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; + p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; else if (dflt->vpp1.present & (1<conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; + p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; p_dev->conf.Attributes |= CONF_ENABLE_IRQ; @@ -244,8 +244,8 @@ static int airo_config(struct pcmcia_device *link) /* Finally, report what we've done */ dev_info(&link->dev, "index 0x%02x: ", link->conf.ConfigIndex); - if (link->conf.Vpp) - printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); + if (link->vpp) + printk(", Vpp %d.%d", link->vpp/10, link->vpp%10); printk(", irq %d", link->irq); if (link->resource[0]) printk(" & %pR", link->resource[0]); diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index 3b632161c106..479f5084bac1 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -183,9 +183,9 @@ static int atmel_config_check(struct pcmcia_device *p_dev, /* Use power settings for Vcc and Vpp if present */ /* Note that the CIS values need to be rescaled */ if (cfg->vpp1.present & (1<conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; + p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; else if (dflt->vpp1.present & (1<conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; + p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; p_dev->conf.Attributes |= CONF_ENABLE_IRQ; diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index ba54d1b04d22..3f35dd4438ca 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -508,9 +508,9 @@ static int prism2_config_check(struct pcmcia_device *p_dev, } if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; + p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; /* Do we need to allocate an interrupt? */ p_dev->conf.Attributes |= CONF_ENABLE_IRQ; @@ -605,9 +605,9 @@ static int prism2_config(struct pcmcia_device *link) /* Finally, report what we've done */ printk(KERN_INFO "%s: index 0x%02x: ", dev_info, link->conf.ConfigIndex); - if (link->conf.Vpp) - printk(", Vpp %d.%d", link->conf.Vpp / 10, - link->conf.Vpp % 10); + if (link->vpp) + printk(", Vpp %d.%d", link->vpp / 10, + link->vpp % 10); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); if (link->resource[0]) diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index ef46a2d88539..f7e3fa6305b4 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -181,10 +181,10 @@ static int orinoco_cs_config_check(struct pcmcia_device *p_dev, } if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = + p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = + p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; /* Do we need to allocate an interrupt? */ diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index 873877e17e1b..1bbad101b559 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -243,10 +243,10 @@ static int spectrum_cs_config_check(struct pcmcia_device *p_dev, } if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = + p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = + p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; /* Do we need to allocate an interrupt? */ diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index 14b1a951e1b6..817d00adfc89 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -303,6 +303,7 @@ int pcmcia_fixup_vpp(struct pcmcia_device *p_dev, unsigned char new_vpp) ret = -EIO; goto unlock; } + p_dev->vpp = new_vpp; unlock: mutex_unlock(&s->ops_mutex); @@ -458,7 +459,7 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev, } /* Do power control. We don't allow changes in Vcc. */ - s->socket.Vpp = req->Vpp; + s->socket.Vpp = p_dev->vpp; if (s->ops->set_socket(s, &s->socket)) { mutex_unlock(&s->ops_mutex); dev_printk(KERN_WARNING, &p_dev->dev, diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index e872e0684273..50574e869418 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -1624,10 +1624,10 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev, } if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) { - p_dev->conf.Vpp = + p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; } else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) { - p_dev->conf.Vpp = + p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; } @@ -1749,8 +1749,8 @@ static int nsp_cs_config(struct pcmcia_device *link) /* Finally, report what we've done */ printk(KERN_INFO "nsp_cs: index 0x%02x: ", link->conf.ConfigIndex); - if (link->conf.Vpp) { - printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); + if (link->vpp) { + printk(", Vpp %d.%d", link->vpp/10, link->vpp%10); } if (link->conf.Attributes & CONF_ENABLE_IRQ) { printk(", irq %d", link->irq); diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 7d475b2a79e8..9597442a0ac1 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -440,7 +440,7 @@ static int simple_config_check(struct pcmcia_device *p_dev, int *try = priv_data; if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = + p_dev->vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; p_dev->io_lines = ((*try & 0x1) == 0) ? diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index 0e13a00eb2ed..8e8475298baa 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -152,10 +152,10 @@ static int sl811_cs_config_check(struct pcmcia_device *p_dev, } if (cfg->vpp1.present & (1<conf.Vpp = + p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; else if (dflt->vpp1.present & (1<conf.Vpp = + p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; /* we need an interrupt */ @@ -201,8 +201,8 @@ static int sl811_cs_config(struct pcmcia_device *link) dev_info(&link->dev, "index 0x%02x: ", link->conf.ConfigIndex); - if (link->conf.Vpp) - printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); + if (link->vpp) + printk(", Vpp %d.%d", link->vpp/10, link->vpp%10); printk(", irq %d", link->irq); printk(", io %pR", link->resource[0]); printk("\n"); diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h index e13d0cd3f8f7..ccb8e6e0dd6b 100644 --- a/include/pcmcia/cs.h +++ b/include/pcmcia/cs.h @@ -22,7 +22,6 @@ /* For RequestConfiguration */ typedef struct config_req_t { u_int Attributes; - u_int Vpp; /* both Vpp1 and Vpp2 */ u_int IntType; u_int ConfigBase; u_char Status, Pin, Copy, ExtStatus; diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h index 8e307b93f47b..6137fbc34abd 100644 --- a/include/pcmcia/ds.h +++ b/include/pcmcia/ds.h @@ -94,6 +94,7 @@ struct pcmcia_device { /* device setup */ unsigned int irq; struct resource *resource[PCMCIA_NUM_RESOURCES]; + unsigned int vpp; unsigned int io_lines; /* number of I/O lines */ -- cgit v1.2.3 From 37979e1546a790c44adbc7f27a85569944480ebc Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Thu, 29 Jul 2010 16:33:23 +0200 Subject: pcmcia: simplify IntType IntType was only set to INT_MEMORY (driver pcmciamtd) or INT_MEMORY_AND_IO (all other drivers). As this flags seems to relate to ioport access, make it conditional to the driver having requested IO port access. There are two drivers which do not request IO ports, but did set INT_MEMORY_AND_IO: ray_cs and b43. For those, we consistently only set INT_MEMORY in future. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan (for drivers/bluetooth) Tested-by: Wolfram Sang Signed-off-by: Dominik Brodowski --- drivers/ata/pata_pcmcia.c | 1 - drivers/bluetooth/bluecard_cs.c | 1 - drivers/bluetooth/bt3c_cs.c | 1 - drivers/bluetooth/btuart_cs.c | 1 - drivers/bluetooth/dtl1_cs.c | 1 - drivers/char/pcmcia/cm4000_cs.c | 3 --- drivers/char/pcmcia/cm4040_cs.c | 3 --- drivers/char/pcmcia/ipwireless/main.c | 1 - drivers/char/pcmcia/synclink_cs.c | 2 -- drivers/ide/ide-cs.c | 1 - drivers/isdn/hardware/avm/avm_cs.c | 1 - drivers/isdn/hisax/avma1_cs.c | 1 - drivers/isdn/hisax/elsa_cs.c | 1 - drivers/isdn/hisax/sedlbauer_cs.c | 1 - drivers/isdn/hisax/teles_cs.c | 1 - drivers/mtd/maps/pcmciamtd.c | 2 -- drivers/net/pcmcia/3c574_cs.c | 1 - drivers/net/pcmcia/3c589_cs.c | 1 - drivers/net/pcmcia/axnet_cs.c | 1 - drivers/net/pcmcia/com20020_cs.c | 1 - drivers/net/pcmcia/fmvj18x_cs.c | 1 - drivers/net/pcmcia/ibmtr_cs.c | 1 - drivers/net/pcmcia/nmclan_cs.c | 1 - drivers/net/pcmcia/pcnet_cs.c | 1 - drivers/net/pcmcia/smc91c92_cs.c | 1 - drivers/net/pcmcia/xirc2ps_cs.c | 1 - drivers/net/wireless/airo_cs.c | 1 - drivers/net/wireless/atmel_cs.c | 1 - drivers/net/wireless/b43/pcmcia.c | 1 - drivers/net/wireless/hostap/hostap_cs.c | 1 - drivers/net/wireless/libertas/if_cs.c | 1 - drivers/net/wireless/orinoco/orinoco_cs.c | 1 - drivers/net/wireless/orinoco/spectrum_cs.c | 1 - drivers/net/wireless/ray_cs.c | 1 - drivers/net/wireless/wl3501_cs.c | 1 - drivers/parport/parport_cs.c | 1 - drivers/pcmcia/cs_internal.h | 1 - drivers/pcmcia/pcmcia_resource.c | 10 +--------- drivers/scsi/pcmcia/aha152x_stub.c | 1 - drivers/scsi/pcmcia/fdomain_stub.c | 1 - drivers/scsi/pcmcia/nsp_cs.c | 1 - drivers/scsi/pcmcia/qlogic_stub.c | 1 - drivers/scsi/pcmcia/sym53c500_cs.c | 1 - drivers/serial/serial_cs.c | 2 -- drivers/staging/comedi/drivers/cb_das16_cs.c | 1 - drivers/staging/comedi/drivers/das08_cs.c | 1 - drivers/staging/comedi/drivers/ni_daq_700.c | 1 - drivers/staging/comedi/drivers/ni_daq_dio24.c | 1 - drivers/staging/comedi/drivers/ni_labpc_cs.c | 1 - drivers/staging/comedi/drivers/ni_mio_cs.c | 1 - drivers/staging/comedi/drivers/quatech_daqp_cs.c | 1 - drivers/staging/wlags49_h2/wl_cs.c | 1 - drivers/telephony/ixj_pcmcia.c | 1 - drivers/usb/host/sl811_cs.c | 1 - include/pcmcia/cs.h | 7 ------- sound/pcmcia/pdaudiocf/pdaudiocf.c | 1 - sound/pcmcia/vx/vxpocket.c | 1 - 57 files changed, 1 insertion(+), 78 deletions(-) (limited to 'drivers/mtd/maps/pcmciamtd.c') diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 12cdc9ff39ad..c2679c01188b 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -250,7 +250,6 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; pdev->conf.Attributes = CONF_ENABLE_IRQ; - pdev->conf.IntType = INT_MEMORY_AND_IO; /* See if we have a manufacturer identifier. Use it to set is_kme for vendor quirks */ diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c index d52e90a5a617..4cb2dfebde80 100644 --- a/drivers/bluetooth/bluecard_cs.c +++ b/drivers/bluetooth/bluecard_cs.c @@ -866,7 +866,6 @@ static int bluecard_probe(struct pcmcia_device *link) link->priv = info; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; return bluecard_config(link); } diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index 2c8d981c110d..fb018073a5f8 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -661,7 +661,6 @@ static int bt3c_probe(struct pcmcia_device *link) link->resource[0]->end = 8; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; return bt3c_config(link); } diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index 7ea6fa42fdef..897c7c74ca14 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -590,7 +590,6 @@ static int btuart_probe(struct pcmcia_device *link) link->resource[0]->end = 8; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; return btuart_config(link); } diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c index db7c8db695fc..b4c9a2e0a96b 100644 --- a/drivers/bluetooth/dtl1_cs.c +++ b/drivers/bluetooth/dtl1_cs.c @@ -576,7 +576,6 @@ static int dtl1_probe(struct pcmcia_device *link) link->resource[0]->end = 8; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; return dtl1_config(link); } diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index ec73d9f6d9ed..d2accd64b3f5 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -1767,8 +1767,6 @@ static int cm4000_config(struct pcmcia_device * link, int devno) if (pcmcia_loop_config(link, cm4000_config_check, NULL)) goto cs_release; - link->conf.IntType = 00000002; - if (pcmcia_request_configuration(link, &link->conf)) goto cs_release; @@ -1829,7 +1827,6 @@ static int cm4000_probe(struct pcmcia_device *link) dev->p_dev = link; link->priv = dev; - link->conf.IntType = INT_MEMORY_AND_IO; dev_table[i] = link; init_waitqueue_head(&dev->devq); diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c index 815cde1d0570..a32eba0afdfc 100644 --- a/drivers/char/pcmcia/cm4040_cs.c +++ b/drivers/char/pcmcia/cm4040_cs.c @@ -547,8 +547,6 @@ static int reader_config(struct pcmcia_device *link, int devno) if (pcmcia_loop_config(link, cm4040_config_check, NULL)) goto cs_release; - link->conf.IntType = 00000002; - fail_rc = pcmcia_request_configuration(link, &link->conf); if (fail_rc != 0) { dev_printk(KERN_INFO, &link->dev, @@ -599,7 +597,6 @@ static int reader_probe(struct pcmcia_device *link) link->priv = dev; dev->p_dev = link; - link->conf.IntType = INT_MEMORY_AND_IO; dev_table[i] = link; init_waitqueue_head(&dev->devq); diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c index 8d2b86aab715..0f0be4df7b7c 100644 --- a/drivers/char/pcmcia/ipwireless/main.c +++ b/drivers/char/pcmcia/ipwireless/main.c @@ -173,7 +173,6 @@ static int config_ipwireless(struct ipw_dev *ipw) return ret; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; INIT_WORK(&ipw->work_reboot, signalled_reboot_work); diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 9ecd6bef5d3b..ba7ccf5701ed 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -551,7 +551,6 @@ static int mgslpc_probe(struct pcmcia_device *link) /* Initialize the struct pcmcia_device structure */ link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; ret = mgslpc_config(link); if (ret) @@ -595,7 +594,6 @@ static int mgslpc_config(struct pcmcia_device *link) goto failed; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 8; link->conf.Present = PRESENT_OPTION; diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index 82690e409435..cf7cb4953aa5 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -100,7 +100,6 @@ static int ide_probe(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; return ide_config(link); } /* ide_attach */ diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c index 09b1795516f4..938ca4155c3b 100644 --- a/drivers/isdn/hardware/avm/avm_cs.c +++ b/drivers/isdn/hardware/avm/avm_cs.c @@ -80,7 +80,6 @@ static int avmcs_probe(struct pcmcia_device *p_dev) /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.IntType = INT_MEMORY_AND_IO; p_dev->conf.ConfigIndex = 1; p_dev->conf.Present = PRESENT_OPTION; diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c index 94263c22b874..7d5ff20b5d5b 100644 --- a/drivers/isdn/hisax/avma1_cs.c +++ b/drivers/isdn/hisax/avma1_cs.c @@ -85,7 +85,6 @@ static int __devinit avma1cs_probe(struct pcmcia_device *p_dev) /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.IntType = INT_MEMORY_AND_IO; p_dev->conf.ConfigIndex = 1; p_dev->conf.Present = PRESENT_OPTION; diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c index b3c08aaf41c4..df360c8b31cb 100644 --- a/drivers/isdn/hisax/elsa_cs.c +++ b/drivers/isdn/hisax/elsa_cs.c @@ -130,7 +130,6 @@ static int __devinit elsa_cs_probe(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; return elsa_cs_config(link); } /* elsa_cs_attach */ diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index 40001ad9f614..169061fbca98 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -133,7 +133,6 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; return sedlbauer_config(link); } /* sedlbauer_attach */ diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c index 7296102ca255..46e72a1eed2d 100644 --- a/drivers/isdn/hisax/teles_cs.c +++ b/drivers/isdn/hisax/teles_cs.c @@ -110,7 +110,6 @@ static int __devinit teles_probe(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; return teles_cs_config(link); } /* teles_attach */ diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c index ab94c8aebddc..663b48bc657c 100644 --- a/drivers/mtd/maps/pcmciamtd.c +++ b/drivers/mtd/maps/pcmciamtd.c @@ -575,7 +575,6 @@ static int pcmciamtd_config(struct pcmcia_device *link) link->vpp = 0; } - link->conf.IntType = INT_MEMORY; link->conf.ConfigIndex = 0; DEBUG(2, "Setting Configuration"); ret = pcmcia_request_configuration(link, &link->conf); @@ -720,7 +719,6 @@ static int pcmciamtd_probe(struct pcmcia_device *link) link->priv = dev; link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY; return pcmciamtd_config(link); } diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index c683f77c6f42..41ecb2728a20 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -281,7 +281,6 @@ static int tc574_probe(struct pcmcia_device *link) link->resource[0]->end = 32; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 1; dev->netdev_ops = &el3_netdev_ops; diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index 61f9cf2100ff..68886729375d 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -217,7 +217,6 @@ static int tc589_probe(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 1; dev->netdev_ops = &el3_netdev_ops; diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 8734ed8f174d..4d4928a22b1f 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -167,7 +167,6 @@ static int axnet_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = dev; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; dev->netdev_ops = &axnet_netdev_ops; diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c index 3c400cfa82ae..a58eafed42a5 100644 --- a/drivers/net/pcmcia/com20020_cs.c +++ b/drivers/net/pcmcia/com20020_cs.c @@ -161,7 +161,6 @@ static int com20020_probe(struct pcmcia_device *p_dev) p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; p_dev->resource[0]->end = 16; p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.IntType = INT_MEMORY_AND_IO; info->dev = dev; p_dev->priv = info; diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index dfd32842412e..caf2b2ef4e35 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -253,7 +253,6 @@ static int fmvj18x_probe(struct pcmcia_device *link) /* General socket configuration */ link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; dev->netdev_ops = &fjn_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index dbdea7f5e423..1327f086d86b 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -153,7 +153,6 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[0]->end = 4; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; link->conf.Present = PRESENT_OPTION; info->dev = dev; diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index 68f2deeb3ade..90d172804bfc 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -461,7 +461,6 @@ static int nmclan_probe(struct pcmcia_device *link) link->resource[0]->end = 32; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 1; link->conf.Present = PRESENT_OPTION; diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index f3d7a149070a..69135761719a 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -261,7 +261,6 @@ static int pcnet_probe(struct pcmcia_device *link) link->priv = dev; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; dev->netdev_ops = &pcnet_netdev_ops; diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index 2031a27253d1..2c2a8788c078 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -327,7 +327,6 @@ static int smc91c92_probe(struct pcmcia_device *link) link->resource[0]->end = 16; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; /* The SMC91c92-specific entries in the device structure. */ dev->netdev_ops = &smc_netdev_ops; diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index 59398a6f1344..1776f49e0917 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -530,7 +530,6 @@ xirc2ps_probe(struct pcmcia_device *link) /* General socket configuration */ link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 1; /* Fill in card specific entries */ diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index ab60f1084716..ccb2fdde002c 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -104,7 +104,6 @@ static int airo_probe(struct pcmcia_device *p_dev) device, and can be hard-wired here. */ p_dev->conf.Attributes = 0; - p_dev->conf.IntType = INT_MEMORY_AND_IO; /* Allocate space for private device-specific data */ local = kzalloc(sizeof(local_info_t), GFP_KERNEL); diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index d6d585cb992a..8b75158caed7 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -114,7 +114,6 @@ static int atmel_probe(struct pcmcia_device *p_dev) device, and can be hard-wired here. */ p_dev->conf.Attributes = 0; - p_dev->conf.IntType = INT_MEMORY_AND_IO; /* Allocate space for private device-specific data */ local = kzalloc(sizeof(local_info_t), GFP_KERNEL); diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c index 618d9b5c1054..138b26fcc75c 100644 --- a/drivers/net/wireless/b43/pcmcia.c +++ b/drivers/net/wireless/b43/pcmcia.c @@ -73,7 +73,6 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) err = -ENODEV; dev->conf.Attributes = CONF_ENABLE_IRQ; - dev->conf.IntType = INT_MEMORY_AND_IO; dev->resource[2]->flags |= WIN_ENABLE | WIN_DATA_WIDTH_16 | WIN_USE_WAIT; diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index 3fa285b1bdd3..0fe6f82cda58 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -437,7 +437,6 @@ static int hostap_cs_probe(struct pcmcia_device *p_dev) int ret; PDEBUG(DEBUG_HW, "%s: setting Vcc=33 (constant)\n", dev_info); - p_dev->conf.IntType = INT_MEMORY_AND_IO; ret = prism2_config(p_dev); if (ret) { diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index 9c298396be50..814b7faaa365 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -836,7 +836,6 @@ static int if_cs_probe(struct pcmcia_device *p_dev) p_dev->priv = card; p_dev->conf.Attributes = 0; - p_dev->conf.IntType = INT_MEMORY_AND_IO; if (pcmcia_loop_config(p_dev, if_cs_ioprobe, NULL)) { lbs_pr_err("error in pcmcia_loop_config\n"); diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index f7e3fa6305b4..1147d6bd4733 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -123,7 +123,6 @@ orinoco_cs_probe(struct pcmcia_device *link) * number, sizes, and attributes of IO windows) are fixed by * the nature of the device, and can be hard-wired here. */ link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; return orinoco_cs_config(link); } /* orinoco_cs_attach */ diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index 1bbad101b559..20b08ab87655 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -185,7 +185,6 @@ spectrum_cs_probe(struct pcmcia_device *link) * number, sizes, and attributes of IO windows) are fixed by * the nature of the device, and can be hard-wired here. */ link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; return spectrum_cs_config(link); } /* spectrum_cs_attach */ diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index ab34cb8c56c7..30cfd8890e34 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -319,7 +319,6 @@ static int ray_probe(struct pcmcia_device *p_dev) /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.IntType = INT_MEMORY_AND_IO; p_dev->conf.ConfigIndex = 1; p_dev->priv = dev; diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index a1cc2d498a1c..92a9ad575cc7 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -1889,7 +1889,6 @@ static int wl3501_probe(struct pcmcia_device *p_dev) /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.IntType = INT_MEMORY_AND_IO; p_dev->conf.ConfigIndex = 1; dev = alloc_etherdev(sizeof(struct wl3501_card)); diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c index 23e50f4a27c5..afd946e15ee7 100644 --- a/drivers/parport/parport_cs.c +++ b/drivers/parport/parport_cs.c @@ -104,7 +104,6 @@ static int parport_probe(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; return parport_config(link); } /* parport_attach */ diff --git a/drivers/pcmcia/cs_internal.h b/drivers/pcmcia/cs_internal.h index 7ef464d40e91..a0c5adb37b5f 100644 --- a/drivers/pcmcia/cs_internal.h +++ b/drivers/pcmcia/cs_internal.h @@ -34,7 +34,6 @@ typedef struct config_t { struct kref ref; unsigned int state; unsigned int Attributes; - unsigned int IntType; unsigned int ConfigBase; unsigned char Option; unsigned int CardValues; diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index 8834bb415d38..6210e1c2b432 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -447,11 +447,6 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev, if (!(s->state & SOCKET_PRESENT)) return -ENODEV; - if (req->IntType & INT_CARDBUS) { - dev_dbg(&p_dev->dev, "IntType may not be INT_CARDBUS\n"); - return -EINVAL; - } - mutex_lock(&s->ops_mutex); c = p_dev->function_config; if (c->state & CONFIG_LOCKED) { @@ -470,12 +465,9 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev, } /* Pick memory or I/O card, DMA mode, interrupt */ - c->IntType = req->IntType; c->Attributes = req->Attributes; - if (req->IntType & INT_MEMORY_AND_IO) + if (p_dev->_io) s->socket.flags |= SS_IOCARD; - if (req->IntType & INT_ZOOMED_VIDEO) - s->socket.flags |= SS_ZVCARD | SS_IOCARD; if (req->Attributes & CONF_ENABLE_DMA) s->socket.flags |= SS_DMA_MODE; if (req->Attributes & CONF_ENABLE_SPKR) { diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c index 61f49bdcc0c2..3c0046e89f37 100644 --- a/drivers/scsi/pcmcia/aha152x_stub.c +++ b/drivers/scsi/pcmcia/aha152x_stub.c @@ -103,7 +103,6 @@ static int aha152x_probe(struct pcmcia_device *link) link->resource[0]->end = 0x20; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; link->conf.Present = PRESENT_OPTION; return aha152x_config_cs(link); diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c index 13dbe5c48492..8ff760380d88 100644 --- a/drivers/scsi/pcmcia/fdomain_stub.c +++ b/drivers/scsi/pcmcia/fdomain_stub.c @@ -86,7 +86,6 @@ static int fdomain_probe(struct pcmcia_device *link) link->resource[0]->end = 0x10; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; link->conf.Present = PRESENT_OPTION; return fdomain_config(link); diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index b90cade36746..c0cf2dfd6fbc 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -1563,7 +1563,6 @@ static int nsp_cs_probe(struct pcmcia_device *link) /* General socket configuration */ link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; ret = nsp_cs_config(link); diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c index eb775f1a523c..77f46a279d6b 100644 --- a/drivers/scsi/pcmcia/qlogic_stub.c +++ b/drivers/scsi/pcmcia/qlogic_stub.c @@ -159,7 +159,6 @@ static int qlogic_probe(struct pcmcia_device *link) link->resource[0]->end = 16; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; link->conf.Present = PRESENT_OPTION; return qlogic_config(link); diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c index 321e390c9120..9aaf974d4d1c 100644 --- a/drivers/scsi/pcmcia/sym53c500_cs.c +++ b/drivers/scsi/pcmcia/sym53c500_cs.c @@ -862,7 +862,6 @@ SYM53C500_probe(struct pcmcia_device *link) link->resource[0]->end = 16; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; return SYM53C500_config(link); } /* SYM53C500_attach */ diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 0460c0882b70..38baede2a770 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -337,8 +337,6 @@ static int serial_probe(struct pcmcia_device *link) if (do_sound) link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.IntType = INT_MEMORY_AND_IO; - return serial_config(link); } diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c index f8ede1182ccc..11271b61f653 100644 --- a/drivers/staging/comedi/drivers/cb_das16_cs.c +++ b/drivers/staging/comedi/drivers/cb_das16_cs.c @@ -694,7 +694,6 @@ static int das16cs_pcmcia_attach(struct pcmcia_device *link) /* Initialize the pcmcia_device structure */ link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; cur_dev = link; diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c index 48d9fb1227df..319aad48ec2e 100644 --- a/drivers/staging/comedi/drivers/das08_cs.c +++ b/drivers/staging/comedi/drivers/das08_cs.c @@ -170,7 +170,6 @@ static int das08_pcmcia_attach(struct pcmcia_device *link) device, and can be hard-wired here. */ link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; cur_dev = link; diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c index 8cf56cb0a3ff..d269bbdf5cfb 100644 --- a/drivers/staging/comedi/drivers/ni_daq_700.c +++ b/drivers/staging/comedi/drivers/ni_daq_700.c @@ -499,7 +499,6 @@ static int dio700_cs_attach(struct pcmcia_device *link) device, and can be hard-wired here. */ link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; pcmcia_cur_dev = link; diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c index ba693435963e..fcaa82967b92 100644 --- a/drivers/staging/comedi/drivers/ni_daq_dio24.c +++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c @@ -251,7 +251,6 @@ static int dio24_cs_attach(struct pcmcia_device *link) device, and can be hard-wired here. */ link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; pcmcia_cur_dev = link; diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c index 5d5f11f2b5c3..a936c11e7dc9 100644 --- a/drivers/staging/comedi/drivers/ni_labpc_cs.c +++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c @@ -227,7 +227,6 @@ static int labpc_cs_attach(struct pcmcia_device *link) device, and can be hard-wired here. */ link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; pcmcia_cur_dev = link; diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c index 1f2426352eb5..be7e021e576d 100644 --- a/drivers/staging/comedi/drivers/ni_mio_cs.c +++ b/drivers/staging/comedi/drivers/ni_mio_cs.c @@ -266,7 +266,6 @@ static int cs_attach(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; link->resource[0]->end = 16; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; cur_dev = link; diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c index bf489d7f4990..cd818fbd9185 100644 --- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c +++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c @@ -1039,7 +1039,6 @@ static int daqp_cs_attach(struct pcmcia_device *link) device, and can be hard-wired here. */ link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; daqp_cs_config(link); diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c index 19c335458653..b2efff692ad5 100644 --- a/drivers/staging/wlags49_h2/wl_cs.c +++ b/drivers/staging/wlags49_h2/wl_cs.c @@ -148,7 +148,6 @@ static int wl_adapter_attach(struct pcmcia_device *link) link->resource[0]->end = HCF_NUM_IO_PORTS; link->resource[0]->flags= IO_DATA_PATH_WIDTH_16; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 5; link->conf.Present = PRESENT_OPTION; diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c index a1900e502518..5ccc6d0560a9 100644 --- a/drivers/telephony/ixj_pcmcia.c +++ b/drivers/telephony/ixj_pcmcia.c @@ -34,7 +34,6 @@ static int ixj_probe(struct pcmcia_device *p_dev) /* Create new ixj device */ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - p_dev->conf.IntType = INT_MEMORY_AND_IO; p_dev->priv = kzalloc(sizeof(struct ixj_info_t), GFP_KERNEL); if (!p_dev->priv) { return -ENOMEM; diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index 8e8475298baa..78bad5188144 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -228,7 +228,6 @@ static int sl811_cs_probe(struct pcmcia_device *link) link->priv = local; link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; return sl811_cs_config(link); } diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h index 29d693f72ba9..674edbc9ebef 100644 --- a/include/pcmcia/cs.h +++ b/include/pcmcia/cs.h @@ -22,7 +22,6 @@ /* For RequestConfiguration */ typedef struct config_req_t { u_int Attributes; - u_int IntType; u_int ConfigBase; u_char ConfigIndex; u_int Present; @@ -36,12 +35,6 @@ typedef struct config_req_t { #define CONF_ENABLE_ESR 0x10 #define CONF_VALID_CLIENT 0x100 -/* IntType field */ -#define INT_MEMORY 0x01 -#define INT_MEMORY_AND_IO 0x02 -#define INT_CARDBUS 0x04 -#define INT_ZOOMED_VIDEO 0x08 - /* Configuration registers present */ #define PRESENT_OPTION 0x001 #define PRESENT_STATUS 0x002 diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c index 7ab9174a8a84..2e1282de77d4 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf.c +++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c @@ -143,7 +143,6 @@ static int snd_pdacf_probe(struct pcmcia_device *link) link->resource[0]->end = 16; link->conf.Attributes = CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 1; link->conf.Present = PRESENT_OPTION; diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c index a6edfc3be29a..a48b3ee71377 100644 --- a/sound/pcmcia/vx/vxpocket.c +++ b/sound/pcmcia/vx/vxpocket.c @@ -163,7 +163,6 @@ static int snd_vxpocket_new(struct snd_card *card, int ibl, link->resource[0]->end = 16; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 1; link->conf.Present = PRESENT_OPTION; -- cgit v1.2.3 From 7feabb6412ea23edd298c0fa90e5aa6733eb4a42 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Thu, 29 Jul 2010 18:35:47 +0200 Subject: pcmcia: move config_{base,index,regs} to struct pcmcia_device Several drivers prefer to explicitly set config_{base,index,regs}, formerly known as ConfigBase, ConfigIndex and Present. Instead of passing these values inside config_req_t, store it in struct pcmcia_device. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan (for drivers/bluetooth) Tested-by: Wolfram Sang Signed-off-by: Dominik Brodowski --- drivers/bluetooth/bluecard_cs.c | 2 +- drivers/char/pcmcia/ipwireless/main.c | 2 +- drivers/char/pcmcia/synclink_cs.c | 6 ++-- drivers/ide/ide-cs.c | 3 +- drivers/isdn/hardware/avm/avm_cs.c | 4 +-- drivers/isdn/hisax/avma1_cs.c | 4 +-- drivers/isdn/hisax/elsa_cs.c | 2 +- drivers/isdn/hisax/sedlbauer_cs.c | 2 +- drivers/isdn/hisax/teles_cs.c | 2 +- drivers/mtd/maps/pcmciamtd.c | 2 +- drivers/net/pcmcia/3c574_cs.c | 2 +- drivers/net/pcmcia/3c589_cs.c | 2 +- drivers/net/pcmcia/axnet_cs.c | 6 ++-- drivers/net/pcmcia/fmvj18x_cs.c | 22 +++++++------- drivers/net/pcmcia/ibmtr_cs.c | 4 +-- drivers/net/pcmcia/nmclan_cs.c | 4 +-- drivers/net/pcmcia/pcnet_cs.c | 6 ++-- drivers/net/pcmcia/smc91c92_cs.c | 10 +++---- drivers/net/pcmcia/xirc2ps_cs.c | 2 +- drivers/net/wireless/airo_cs.c | 2 +- drivers/net/wireless/hostap/hostap_cs.c | 2 +- drivers/net/wireless/ray_cs.c | 2 +- drivers/net/wireless/wl3501_cs.c | 2 +- drivers/parport/parport_cs.c | 2 +- drivers/pcmcia/cs_internal.h | 3 -- drivers/pcmcia/ds.c | 8 ++--- drivers/pcmcia/pcmcia_cis.c | 2 +- drivers/pcmcia/pcmcia_resource.c | 38 ++++++++++++------------ drivers/scsi/pcmcia/aha152x_stub.c | 2 +- drivers/scsi/pcmcia/fdomain_stub.c | 2 +- drivers/scsi/pcmcia/nsp_cs.c | 2 +- drivers/scsi/pcmcia/qlogic_stub.c | 2 +- drivers/serial/serial_cs.c | 6 ++-- drivers/staging/comedi/drivers/cb_das16_cs.c | 2 +- drivers/staging/comedi/drivers/das08_cs.c | 2 +- drivers/staging/comedi/drivers/ni_daq_700.c | 2 +- drivers/staging/comedi/drivers/ni_daq_dio24.c | 2 +- drivers/staging/comedi/drivers/ni_labpc_cs.c | 2 +- drivers/staging/comedi/drivers/quatech_daqp_cs.c | 2 +- drivers/staging/wlags49_h2/wl_cs.c | 4 +-- drivers/usb/host/sl811_cs.c | 2 +- include/pcmcia/cs.h | 15 ---------- include/pcmcia/ds.h | 14 +++++++++ sound/pcmcia/pdaudiocf/pdaudiocf.c | 6 ++-- sound/pcmcia/vx/vxpocket.c | 4 +-- 45 files changed, 107 insertions(+), 112 deletions(-) (limited to 'drivers/mtd/maps/pcmciamtd.c') diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c index 4cb2dfebde80..08f4818ad9f7 100644 --- a/drivers/bluetooth/bluecard_cs.c +++ b/drivers/bluetooth/bluecard_cs.c @@ -885,7 +885,7 @@ static int bluecard_config(struct pcmcia_device *link) bluecard_info_t *info = link->priv; int i, n; - link->conf.ConfigIndex = 0x20; + link->config_index = 0x20; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[0]->end = 64; diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c index 0f0be4df7b7c..05c4e6834a6b 100644 --- a/drivers/char/pcmcia/ipwireless/main.c +++ b/drivers/char/pcmcia/ipwireless/main.c @@ -92,7 +92,7 @@ static int ipwireless_probe(struct pcmcia_device *p_dev, /* 0x40 causes it to generate level mode interrupts. */ /* 0x04 enables IREQ pin. */ - p_dev->conf.ConfigIndex = cfg->index | 0x44; + p_dev->config_index = cfg->index | 0x44; p_dev->io_lines = 16; ret = pcmcia_request_io(p_dev); if (ret) diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index ba7ccf5701ed..535aa0899e9f 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -594,8 +594,8 @@ static int mgslpc_config(struct pcmcia_device *link) goto failed; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.ConfigIndex = 8; - link->conf.Present = PRESENT_OPTION; + link->config_index = 8; + link->config_regs = PRESENT_OPTION; ret = pcmcia_request_irq(link, mgslpc_isr); if (ret) @@ -608,7 +608,7 @@ static int mgslpc_config(struct pcmcia_device *link) info->irq_level = link->irq; dev_info(&link->dev, "index 0x%02x:", - link->conf.ConfigIndex); + link->config_index); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); if (link->resource[0]) diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index cf7cb4953aa5..07e37876559c 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -227,8 +227,7 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev, if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; pdev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - - pdev->conf.ConfigIndex = cfg->index; + pdev->config_index = cfg->index; pdev->resource[0]->start = io->win[0].base; if (!(io->flags & CISTPL_IO_16BIT)) { pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c index 938ca4155c3b..2d8bbbf286aa 100644 --- a/drivers/isdn/hardware/avm/avm_cs.c +++ b/drivers/isdn/hardware/avm/avm_cs.c @@ -80,8 +80,8 @@ static int avmcs_probe(struct pcmcia_device *p_dev) /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.ConfigIndex = 1; - p_dev->conf.Present = PRESENT_OPTION; + p_dev->config_index = 1; + p_dev->config_regs = PRESENT_OPTION; return avmcs_config(p_dev); } /* avmcs_attach */ diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c index 7d5ff20b5d5b..e25f6c7376ed 100644 --- a/drivers/isdn/hisax/avma1_cs.c +++ b/drivers/isdn/hisax/avma1_cs.c @@ -85,8 +85,8 @@ static int __devinit avma1cs_probe(struct pcmcia_device *p_dev) /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.ConfigIndex = 1; - p_dev->conf.Present = PRESENT_OPTION; + p_dev->config_index = 1; + p_dev->config_regs = PRESENT_OPTION; return avma1cs_config(p_dev); } /* avma1cs_attach */ diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c index df360c8b31cb..f276e8428960 100644 --- a/drivers/isdn/hisax/elsa_cs.c +++ b/drivers/isdn/hisax/elsa_cs.c @@ -211,7 +211,7 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link) /* Finally, report what we've done */ dev_info(&link->dev, "index 0x%02x: ", - link->conf.ConfigIndex); + link->config_index); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); if (link->resource[0]) diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index 169061fbca98..43d0a4e97ead 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -253,7 +253,7 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link) /* Finally, report what we've done */ dev_info(&link->dev, "index 0x%02x:", - link->conf.ConfigIndex); + link->config_index); if (link->vpp) printk(", Vpp %d.%d", link->vpp/10, link->vpp%10); if (link->conf.Attributes & CONF_ENABLE_IRQ) diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c index 46e72a1eed2d..614afc64b5b1 100644 --- a/drivers/isdn/hisax/teles_cs.c +++ b/drivers/isdn/hisax/teles_cs.c @@ -191,7 +191,7 @@ static int __devinit teles_cs_config(struct pcmcia_device *link) /* Finally, report what we've done */ dev_info(&link->dev, "index 0x%02x:", - link->conf.ConfigIndex); + link->config_index); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); if (link->resource[0]) diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c index 663b48bc657c..99c7257363d6 100644 --- a/drivers/mtd/maps/pcmciamtd.c +++ b/drivers/mtd/maps/pcmciamtd.c @@ -575,7 +575,7 @@ static int pcmciamtd_config(struct pcmcia_device *link) link->vpp = 0; } - link->conf.ConfigIndex = 0; + link->config_index = 0; DEBUG(2, "Setting Configuration"); ret = pcmcia_request_configuration(link, &link->conf); if (ret != 0) { diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index 41ecb2728a20..4b670b3da378 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -281,7 +281,7 @@ static int tc574_probe(struct pcmcia_device *link) link->resource[0]->end = 32; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.ConfigIndex = 1; + link->config_index = 1; dev->netdev_ops = &el3_netdev_ops; SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index 68886729375d..6549e2c496a0 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -217,7 +217,7 @@ static int tc589_probe(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.ConfigIndex = 1; + link->config_index = 1; dev->netdev_ops = &el3_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 4d4928a22b1f..2c273ce6a5d8 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -230,7 +230,7 @@ static int get_prom(struct pcmcia_device *link) }; /* Not much of a test, but the alternatives are messy */ - if (link->conf.ConfigBase != 0x03c0) + if (link->config_base != 0x03c0) return 0; axnet_reset_8390(dev); @@ -297,7 +297,7 @@ static int axnet_configcheck(struct pcmcia_device *p_dev, if (cfg->index == 0 || cfg->io.nwin == 0) return -ENODEV; - p_dev->conf.ConfigIndex = 0x05; + p_dev->config_index = 0x05; /* For multifunction cards, by convention, we configure the network function with window 0, and serial with window 1 */ if (io->nwin > 1) { @@ -325,7 +325,7 @@ static int axnet_config(struct pcmcia_device *link) dev_dbg(&link->dev, "axnet_config(0x%p)\n", link); /* don't trust the CIS on this; Linksys got it wrong */ - link->conf.Present = 0x63; + link->config_regs = 0x63; ret = pcmcia_loop_config(link, axnet_configcheck, NULL); if (ret != 0) goto failed; diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index caf2b2ef4e35..23f5333d8029 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -312,7 +312,7 @@ static int ungermann_try_io_port(struct pcmcia_device *link) ret = pcmcia_request_io(link); if (ret == 0) { /* calculate ConfigIndex value */ - link->conf.ConfigIndex = + link->config_index = ((link->resource[0]->start & 0x0f0) >> 3) | 0x22; return ret; } @@ -361,28 +361,28 @@ static int fmvj18x_config(struct pcmcia_device *link) link->card_id == PRODID_TDK_NP9610 || link->card_id == PRODID_TDK_MN3200) { /* MultiFunction Card */ - link->conf.ConfigBase = 0x800; - link->conf.ConfigIndex = 0x47; + link->config_base = 0x800; + link->config_index = 0x47; link->resource[1]->end = 8; } break; case MANFID_NEC: cardtype = NEC; /* MultiFunction Card */ - link->conf.ConfigBase = 0x800; - link->conf.ConfigIndex = 0x47; + link->config_base = 0x800; + link->config_index = 0x47; link->resource[1]->end = 8; break; case MANFID_KME: cardtype = KME; /* MultiFunction Card */ - link->conf.ConfigBase = 0x800; - link->conf.ConfigIndex = 0x47; + link->config_base = 0x800; + link->config_index = 0x47; link->resource[1]->end = 8; break; case MANFID_CONTEC: cardtype = CONTEC; break; case MANFID_FUJITSU: - if (link->conf.ConfigBase == 0x0fe0) + if (link->config_base == 0x0fe0) cardtype = MBH10302; else if (link->card_id == PRODID_FUJITSU_MBH10302) /* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302), @@ -402,10 +402,10 @@ static int fmvj18x_config(struct pcmcia_device *link) case MANFID_FUJITSU: if (link->card_id == PRODID_FUJITSU_MBH10304) { cardtype = XXX10304; /* MBH10304 with buggy CIS */ - link->conf.ConfigIndex = 0x20; + link->config_index = 0x20; } else { cardtype = MBH10302; /* NextCom NC5310, etc. */ - link->conf.ConfigIndex = 1; + link->config_index = 1; } break; case MANFID_UNGERMANN: @@ -413,7 +413,7 @@ static int fmvj18x_config(struct pcmcia_device *link) break; default: cardtype = MBH10302; - link->conf.ConfigIndex = 1; + link->config_index = 1; } } diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index 1327f086d86b..feedeeb17a52 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -153,7 +153,7 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[0]->end = 4; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.Present = PRESENT_OPTION; + link->config_regs = PRESENT_OPTION; info->dev = dev; @@ -212,8 +212,8 @@ static int __devinit ibmtr_config(struct pcmcia_device *link) dev_dbg(&link->dev, "ibmtr_config\n"); - link->conf.ConfigIndex = 0x61; link->io_lines = 16; + link->config_index = 0x61; /* Determine if this is PRIMARY or ALTERNATE. */ diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index 90d172804bfc..98c4a6976045 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -461,8 +461,8 @@ static int nmclan_probe(struct pcmcia_device *link) link->resource[0]->end = 32; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.ConfigIndex = 1; - link->conf.Present = PRESENT_OPTION; + link->config_index = 1; + link->config_regs = PRESENT_OPTION; lp->tx_free_frames=AM2150_MAX_TX_FRAMES; diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 69135761719a..68c46751f84f 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -420,7 +420,7 @@ static hw_info_t *get_ax88190(struct pcmcia_device *link) int i, j; /* Not much of a test, but the alternatives are messy */ - if (link->conf.ConfigBase != 0x03c0) + if (link->config_base != 0x03c0) return NULL; outb_p(0x01, ioaddr + EN0_DCFG); /* Set word-wide access. */ @@ -564,7 +564,7 @@ static hw_info_t *pcnet_try_config(struct pcmcia_device *link, if ((link->manf_id == MANFID_IBM) && (link->card_id == PRODID_IBM_HOME_AND_AWAY)) - link->conf.ConfigIndex |= 0x10; + link->config_index |= 0x10; ret = pcmcia_request_configuration(link, &link->conf); if (ret) @@ -581,7 +581,7 @@ static hw_info_t *pcnet_try_config(struct pcmcia_device *link, } else dev->if_port = 0; - if ((link->conf.ConfigBase == 0x03c0) && + if ((link->config_base == 0x03c0) && (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) { dev_info(&link->dev, "this is an AX88190 card - use axnet_cs instead.\n"); diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index 2c2a8788c078..59f5034e8d93 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -411,9 +411,9 @@ static int mhz_3288_power(struct pcmcia_device *link) mdelay(200); /* Now read and write the COR... */ - tmp = readb(smc->base + link->conf.ConfigBase + CISREG_COR); + tmp = readb(smc->base + link->config_base + CISREG_COR); udelay(5); - writeb(tmp, smc->base + link->conf.ConfigBase + CISREG_COR); + writeb(tmp, smc->base + link->config_base + CISREG_COR); return 0; } @@ -464,7 +464,7 @@ static int mhz_mfc_config(struct pcmcia_device *link) smc->base = ioremap(link->resource[2]->start, resource_size(link->resource[2])); - offset = (smc->manfid == MANFID_MOTOROLA) ? link->conf.ConfigBase : 0; + offset = (smc->manfid == MANFID_MOTOROLA) ? link->config_base : 0; i = pcmcia_map_mem_page(link, link->resource[2], offset); if ((i == 0) && (smc->manfid == MANFID_MEGAHERTZ) && @@ -643,8 +643,8 @@ static int osi_config(struct pcmcia_device *link) link->resource[1]->end = 8; /* Enable Hard Decode, LAN, Modem */ - link->conf.ConfigIndex = 0x23; link->io_lines = 16; + link->config_index = 0x23; for (i = j = 0; j < 4; j++) { link->resource[1]->start = com[j]; @@ -654,7 +654,7 @@ static int osi_config(struct pcmcia_device *link) } if (i != 0) { /* Fallback: turn off hard decode */ - link->conf.ConfigIndex = 0x03; + link->config_index = 0x03; link->resource[1]->end = 0; i = pcmcia_request_io(link); } diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index 1776f49e0917..1c8ebf2df0c0 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -530,7 +530,7 @@ xirc2ps_probe(struct pcmcia_device *link) /* General socket configuration */ link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.ConfigIndex = 1; + link->config_index = 1; /* Fill in card specific entries */ dev->netdev_ops = &netdev_ops; diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index ccb2fdde002c..40f9ed760bb3 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -240,7 +240,7 @@ static int airo_config(struct pcmcia_device *link) /* Finally, report what we've done */ dev_info(&link->dev, "index 0x%02x: ", - link->conf.ConfigIndex); + link->config_index); if (link->vpp) printk(", Vpp %d.%d", link->vpp/10, link->vpp%10); printk(", irq %d", link->irq); diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index 0fe6f82cda58..5704d3f9e1b7 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -601,7 +601,7 @@ static int prism2_config(struct pcmcia_device *link) /* Finally, report what we've done */ printk(KERN_INFO "%s: index 0x%02x: ", - dev_info, link->conf.ConfigIndex); + dev_info, link->config_index); if (link->vpp) printk(", Vpp %d.%d", link->vpp / 10, link->vpp % 10); diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index 30cfd8890e34..7fb66cc1e9fd 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -319,7 +319,7 @@ static int ray_probe(struct pcmcia_device *p_dev) /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.ConfigIndex = 1; + p_dev->config_index = 1; p_dev->priv = dev; diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index 92a9ad575cc7..3947cf8e63c5 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -1889,7 +1889,7 @@ static int wl3501_probe(struct pcmcia_device *p_dev) /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.ConfigIndex = 1; + p_dev->config_index = 1; dev = alloc_etherdev(sizeof(struct wl3501_card)); if (!dev) diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c index afd946e15ee7..8faf634987e3 100644 --- a/drivers/parport/parport_cs.c +++ b/drivers/parport/parport_cs.c @@ -144,7 +144,7 @@ static int parport_config_check(struct pcmcia_device *p_dev, cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; if (epp_mode) - p_dev->conf.ConfigIndex |= FORCE_EPP_MODE; + p_dev->config_index |= FORCE_EPP_MODE; p_dev->resource[0]->start = io->win[0].base; p_dev->resource[0]->end = io->win[0].len; if (io->nwin == 2) { diff --git a/drivers/pcmcia/cs_internal.h b/drivers/pcmcia/cs_internal.h index a0c5adb37b5f..42eef437afd4 100644 --- a/drivers/pcmcia/cs_internal.h +++ b/drivers/pcmcia/cs_internal.h @@ -34,9 +34,6 @@ typedef struct config_t { struct kref ref; unsigned int state; unsigned int Attributes; - unsigned int ConfigBase; - unsigned char Option; - unsigned int CardValues; struct resource io[MAX_IO_WIN]; /* io ports */ struct resource mem[MAX_WIN]; /* mem areas */ diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 55570d9e1e4c..00db60053f93 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -276,13 +276,13 @@ static int pcmcia_device_probe(struct device *dev) ret = pccard_read_tuple(p_dev->socket, p_dev->func, CISTPL_CONFIG, &cis_config); if (!ret) { - p_dev->conf.ConfigBase = cis_config.base; - p_dev->conf.Present = cis_config.rmask[0]; + p_dev->config_base = cis_config.base; + p_dev->config_regs = cis_config.rmask[0]; } else { dev_printk(KERN_INFO, dev, "pcmcia: could not parse base and rmask0 of CIS\n"); - p_dev->conf.ConfigBase = 0; - p_dev->conf.Present = 0; + p_dev->config_base = 0; + p_dev->config_regs = 0; } ret = p_drv->probe(p_dev); diff --git a/drivers/pcmcia/pcmcia_cis.c b/drivers/pcmcia/pcmcia_cis.c index 0ac54da15885..ac47cc4e20e8 100644 --- a/drivers/pcmcia/pcmcia_cis.c +++ b/drivers/pcmcia/pcmcia_cis.c @@ -151,7 +151,7 @@ static int pcmcia_do_loop_config(tuple_t *tuple, cisparse_t *parse, void *priv) struct pcmcia_cfg_mem *cfg_mem = priv; /* default values */ - cfg_mem->p_dev->conf.ConfigIndex = cfg->index; + cfg_mem->p_dev->config_index = cfg->index; if (cfg->flags & CISTPL_CFTABLE_DEFAULT) cfg_mem->dflt = *cfg; diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index 6210e1c2b432..a1fb0dc1a71f 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -168,7 +168,7 @@ static int pcmcia_access_config(struct pcmcia_device *p_dev, return -EACCES; } - addr = (c->ConfigBase + where) >> 1; + addr = (p_dev->config_base + where) >> 1; ret = accessf(s, 1, addr, 1, val); @@ -443,6 +443,7 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev, pccard_io_map iomap; unsigned char status = 0; unsigned char ext_status = 0; + unsigned char option = 0; if (!(s->state & SOCKET_PRESENT)) return -ENODEV; @@ -473,7 +474,7 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev, if (req->Attributes & CONF_ENABLE_SPKR) { s->socket.flags |= SS_SPKR_ENA; status = CCSR_AUDIO_ENA; - if (!(req->Present & PRESENT_STATUS)) + if (!(p_dev->config_regs & PRESENT_STATUS)) dev_warn(&p_dev->dev, "speaker requested, but " "PRESENT_STATUS not set!\n"); } @@ -482,54 +483,53 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev, else s->socket.io_irq = 0; if (req->Attributes & CONF_ENABLE_ESR) { - req->Present |= PRESENT_EXT_STATUS; + p_dev->config_regs |= PRESENT_EXT_STATUS; ext_status = ESR_REQ_ATTN_ENA; } s->ops->set_socket(s, &s->socket); s->lock_count++; /* Set up CIS configuration registers */ - base = c->ConfigBase = req->ConfigBase; - c->CardValues = req->Present; - if (req->Present & PRESENT_COPY) { + base = p_dev->config_base; + if (p_dev->config_regs & PRESENT_COPY) { u16 tmp = 0; dev_dbg(&p_dev->dev, "clearing CISREG_SCR\n"); pcmcia_write_cis_mem(s, 1, (base + CISREG_SCR)>>1, 1, &tmp); } - if (req->Present & PRESENT_PIN_REPLACE) { + if (p_dev->config_regs & PRESENT_PIN_REPLACE) { u16 tmp = 0; dev_dbg(&p_dev->dev, "clearing CISREG_PRR\n"); pcmcia_write_cis_mem(s, 1, (base + CISREG_PRR)>>1, 1, &tmp); } - if (req->Present & PRESENT_OPTION) { + if (p_dev->config_regs & PRESENT_OPTION) { if (s->functions == 1) { - c->Option = req->ConfigIndex & COR_CONFIG_MASK; + option = p_dev->config_index & COR_CONFIG_MASK; } else { - c->Option = req->ConfigIndex & COR_MFC_CONFIG_MASK; - c->Option |= COR_FUNC_ENA|COR_IREQ_ENA; - if (req->Present & PRESENT_IOBASE_0) - c->Option |= COR_ADDR_DECODE; + option = p_dev->config_index & COR_MFC_CONFIG_MASK; + option |= COR_FUNC_ENA|COR_IREQ_ENA; + if (p_dev->config_regs & PRESENT_IOBASE_0) + option |= COR_ADDR_DECODE; } if ((req->Attributes & CONF_ENABLE_IRQ) && !(req->Attributes & CONF_ENABLE_PULSE_IRQ)) - c->Option |= COR_LEVEL_REQ; - pcmcia_write_cis_mem(s, 1, (base + CISREG_COR)>>1, 1, &c->Option); + option |= COR_LEVEL_REQ; + pcmcia_write_cis_mem(s, 1, (base + CISREG_COR)>>1, 1, &option); mdelay(40); } - if (req->Present & PRESENT_STATUS) + if (p_dev->config_regs & PRESENT_STATUS) pcmcia_write_cis_mem(s, 1, (base + CISREG_CCSR)>>1, 1, &status); - if (req->Present & PRESENT_EXT_STATUS) + if (p_dev->config_regs & PRESENT_EXT_STATUS) pcmcia_write_cis_mem(s, 1, (base + CISREG_ESR)>>1, 1, &ext_status); - if (req->Present & PRESENT_IOBASE_0) { + if (p_dev->config_regs & PRESENT_IOBASE_0) { u8 b = c->io[0].start & 0xff; pcmcia_write_cis_mem(s, 1, (base + CISREG_IOBASE_0)>>1, 1, &b); b = (c->io[0].start >> 8) & 0xff; pcmcia_write_cis_mem(s, 1, (base + CISREG_IOBASE_1)>>1, 1, &b); } - if (req->Present & PRESENT_IOSIZE) { + if (p_dev->config_regs & PRESENT_IOSIZE) { u8 b = resource_size(&c->io[0]) + resource_size(&c->io[1]) - 1; pcmcia_write_cis_mem(s, 1, (base + CISREG_IOSIZE)>>1, 1, &b); } diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c index 3c0046e89f37..c3682492af16 100644 --- a/drivers/scsi/pcmcia/aha152x_stub.c +++ b/drivers/scsi/pcmcia/aha152x_stub.c @@ -103,7 +103,7 @@ static int aha152x_probe(struct pcmcia_device *link) link->resource[0]->end = 0x20; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.Present = PRESENT_OPTION; + link->config_regs = PRESENT_OPTION; return aha152x_config_cs(link); } /* aha152x_attach */ diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c index 8ff760380d88..bb909e1b7c68 100644 --- a/drivers/scsi/pcmcia/fdomain_stub.c +++ b/drivers/scsi/pcmcia/fdomain_stub.c @@ -86,7 +86,7 @@ static int fdomain_probe(struct pcmcia_device *link) link->resource[0]->end = 0x10; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.Present = PRESENT_OPTION; + link->config_regs = PRESENT_OPTION; return fdomain_config(link); } /* fdomain_attach */ diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index c0cf2dfd6fbc..a5648e9c4f6e 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -1745,7 +1745,7 @@ static int nsp_cs_config(struct pcmcia_device *link) /* Finally, report what we've done */ printk(KERN_INFO "nsp_cs: index 0x%02x: ", - link->conf.ConfigIndex); + link->config_index); if (link->vpp) { printk(", Vpp %d.%d", link->vpp/10, link->vpp%10); } diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c index 77f46a279d6b..5e2cbe091408 100644 --- a/drivers/scsi/pcmcia/qlogic_stub.c +++ b/drivers/scsi/pcmcia/qlogic_stub.c @@ -159,7 +159,7 @@ static int qlogic_probe(struct pcmcia_device *link) link->resource[0]->end = 16; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.Present = PRESENT_OPTION; + link->config_regs = PRESENT_OPTION; return qlogic_config(link); } /* qlogic_attach */ diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 38baede2a770..ee19f2d25c20 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -495,7 +495,7 @@ static int simple_config(struct pcmcia_device *link) found_port: if (info->multi && (info->manfid == MANFID_3COM)) - link->conf.ConfigIndex &= ~(0x08); + link->config_index &= ~(0x08); /* * Apply any configuration quirks. @@ -591,8 +591,8 @@ static int multi_config(struct pcmcia_device *link) info->prodid == PRODID_POSSIO_GCC)) { int err; - if (link->conf.ConfigIndex == 1 || - link->conf.ConfigIndex == 3) { + if (link->config_index == 1 || + link->config_index == 3) { err = setup_serial(link, info, base2, link->irq); base2 = link->resource[0]->start;; diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c index 11271b61f653..034cbfcba196 100644 --- a/drivers/staging/comedi/drivers/cb_das16_cs.c +++ b/drivers/staging/comedi/drivers/cb_das16_cs.c @@ -772,7 +772,7 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link) goto failed; /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); + dev_info(&link->dev, "index 0x%02x", link->config_index); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %u", link->irq); if (link->resource[0]) diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c index 319aad48ec2e..e37ea79e6aea 100644 --- a/drivers/staging/comedi/drivers/das08_cs.c +++ b/drivers/staging/comedi/drivers/das08_cs.c @@ -268,7 +268,7 @@ static void das08_pcmcia_config(struct pcmcia_device *link) goto failed; /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); + dev_info(&link->dev, "index 0x%02x", link->config_index); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %u", link->irq); if (link->resource[0]) diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c index d269bbdf5cfb..8107e4009248 100644 --- a/drivers/staging/comedi/drivers/ni_daq_700.c +++ b/drivers/staging/comedi/drivers/ni_daq_700.c @@ -607,7 +607,7 @@ static void dio700_config(struct pcmcia_device *link) goto failed; /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); + dev_info(&link->dev, "index 0x%02x", link->config_index); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); if (link->resource[0]) diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c index fcaa82967b92..4f9daa3558aa 100644 --- a/drivers/staging/comedi/drivers/ni_daq_dio24.c +++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c @@ -358,7 +358,7 @@ static void dio24_config(struct pcmcia_device *link) goto failed; /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); + dev_info(&link->dev, "index 0x%02x", link->config_index); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); if (link->resource[0]) diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c index a936c11e7dc9..2e27a3048cb8 100644 --- a/drivers/staging/comedi/drivers/ni_labpc_cs.c +++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c @@ -336,7 +336,7 @@ static void labpc_config(struct pcmcia_device *link) goto failed; /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); + dev_info(&link->dev, "index 0x%02x", link->config_index); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %d", link->irq); if (link->resource[0]) diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c index cd818fbd9185..a2a32de044c8 100644 --- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c +++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c @@ -1137,7 +1137,7 @@ static void daqp_cs_config(struct pcmcia_device *link) goto failed; /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); + dev_info(&link->dev, "index 0x%02x", link->config_index); if (link->conf.Attributes & CONF_ENABLE_IRQ) printk(", irq %u", link->irq); if (link->resource[0]) diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c index b2efff692ad5..778800f1e464 100644 --- a/drivers/staging/wlags49_h2/wl_cs.c +++ b/drivers/staging/wlags49_h2/wl_cs.c @@ -148,8 +148,8 @@ static int wl_adapter_attach(struct pcmcia_device *link) link->resource[0]->end = HCF_NUM_IO_PORTS; link->resource[0]->flags= IO_DATA_PATH_WIDTH_16; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.ConfigIndex = 5; - link->conf.Present = PRESENT_OPTION; + link->config_index = 5; + link->config_regs = PRESENT_OPTION; link->priv = dev; lp = wl_priv(dev); diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index 78bad5188144..590405361bed 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -200,7 +200,7 @@ static int sl811_cs_config(struct pcmcia_device *link) goto failed; dev_info(&link->dev, "index 0x%02x: ", - link->conf.ConfigIndex); + link->config_index); if (link->vpp) printk(", Vpp %d.%d", link->vpp/10, link->vpp%10); printk(", irq %d", link->irq); diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h index 674edbc9ebef..47b6092c4ed6 100644 --- a/include/pcmcia/cs.h +++ b/include/pcmcia/cs.h @@ -22,9 +22,6 @@ /* For RequestConfiguration */ typedef struct config_req_t { u_int Attributes; - u_int ConfigBase; - u_char ConfigIndex; - u_int Present; } config_req_t; /* Attributes for RequestConfiguration */ @@ -35,16 +32,4 @@ typedef struct config_req_t { #define CONF_ENABLE_ESR 0x10 #define CONF_VALID_CLIENT 0x100 -/* Configuration registers present */ -#define PRESENT_OPTION 0x001 -#define PRESENT_STATUS 0x002 -#define PRESENT_PIN_REPLACE 0x004 -#define PRESENT_COPY 0x008 -#define PRESENT_EXT_STATUS 0x010 -#define PRESENT_IOBASE_0 0x020 -#define PRESENT_IOBASE_1 0x040 -#define PRESENT_IOBASE_2 0x080 -#define PRESENT_IOBASE_3 0x100 -#define PRESENT_IOSIZE 0x200 - #endif /* _LINUX_CS_H */ diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h index 6137fbc34abd..bc28f96d0b5a 100644 --- a/include/pcmcia/ds.h +++ b/include/pcmcia/ds.h @@ -97,6 +97,9 @@ struct pcmcia_device { unsigned int vpp; unsigned int io_lines; /* number of I/O lines */ + unsigned int config_base; + unsigned int config_index; + unsigned int config_regs; /* PRESENT_ flags below */ /* Is the device suspended? */ u16 suspended:1; @@ -250,6 +253,17 @@ static inline int pcmcia_io_cfg_data_width(unsigned int flags) 0x0c -> 2 0x10 -> 3 */ +/* config_reg{ister}s present for this PCMCIA device */ +#define PRESENT_OPTION 0x001 +#define PRESENT_STATUS 0x002 +#define PRESENT_PIN_REPLACE 0x004 +#define PRESENT_COPY 0x008 +#define PRESENT_EXT_STATUS 0x010 +#define PRESENT_IOBASE_0 0x020 +#define PRESENT_IOBASE_1 0x040 +#define PRESENT_IOBASE_2 0x080 +#define PRESENT_IOBASE_3 0x100 +#define PRESENT_IOSIZE 0x200 #endif /* __KERNEL__ */ diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c index 2e1282de77d4..4df07fce637f 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf.c +++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c @@ -143,8 +143,8 @@ static int snd_pdacf_probe(struct pcmcia_device *link) link->resource[0]->end = 16; link->conf.Attributes = CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; - link->conf.ConfigIndex = 1; - link->conf.Present = PRESENT_OPTION; + link->config_index = 1; + link->config_regs = PRESENT_OPTION; return pdacf_config(link); } @@ -216,7 +216,7 @@ static int pdacf_config(struct pcmcia_device *link) int ret; snd_printdd(KERN_DEBUG "pdacf_config called\n"); - link->conf.ConfigIndex = 0x5; + link->config_index = 0x5; ret = pcmcia_request_io(link); if (ret) diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c index a48b3ee71377..16186adc1bdc 100644 --- a/sound/pcmcia/vx/vxpocket.c +++ b/sound/pcmcia/vx/vxpocket.c @@ -163,8 +163,8 @@ static int snd_vxpocket_new(struct snd_card *card, int ibl, link->resource[0]->end = 16; link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.ConfigIndex = 1; - link->conf.Present = PRESENT_OPTION; + link->config_index = 1; + link->config_regs = PRESENT_OPTION; *chip_ret = vxp; return 0; -- cgit v1.2.3 From 1ac71e5a35eebee60cdcf15b3980bd94498f037b Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Thu, 29 Jul 2010 19:27:09 +0200 Subject: pcmcia: convert pcmcia_request_configuration to pcmcia_enable_device pcmcia_enable_device() now replaces pcmcia_request_configuration(). Instead of config_req_t, all necessary flags are either passed as a parameter to pcmcia_enable_device(), or (in rare circumstances) set in struct pcmcia_device -> flags. With the last remaining user of include/pcmcia/cs.h gone, remove all references. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan (for drivers/bluetooth) Tested-by: Wolfram Sang Signed-off-by: Dominik Brodowski --- Documentation/pcmcia/driver-changes.txt | 6 ++++ drivers/ata/pata_pcmcia.c | 5 ++-- drivers/bluetooth/bluecard_cs.c | 5 ++-- drivers/bluetooth/bt3c_cs.c | 5 ++-- drivers/bluetooth/btuart_cs.c | 5 ++-- drivers/bluetooth/dtl1_cs.c | 5 ++-- drivers/char/pcmcia/cm4000_cs.c | 3 +- drivers/char/pcmcia/cm4040_cs.c | 5 ++-- drivers/char/pcmcia/ipwireless/main.c | 6 ++-- drivers/char/pcmcia/ipwireless/main.h | 1 - drivers/char/pcmcia/ipwireless/tty.h | 1 - drivers/char/pcmcia/synclink_cs.c | 10 ++----- drivers/ide/ide-cs.c | 6 ++-- drivers/isdn/hardware/avm/avm_cs.c | 5 ++-- drivers/isdn/hisax/avma1_cs.c | 5 ++-- drivers/isdn/hisax/elsa_cs.c | 8 ++---- drivers/isdn/hisax/sedlbauer_cs.c | 12 +++----- drivers/isdn/hisax/teles_cs.c | 8 ++---- drivers/mmc/host/sdricoh_cs.c | 1 - drivers/mtd/maps/pcmciamtd.c | 6 +--- drivers/net/pcmcia/3c574_cs.c | 5 ++-- drivers/net/pcmcia/3c589_cs.c | 5 ++-- drivers/net/pcmcia/axnet_cs.c | 10 +++---- drivers/net/pcmcia/com20020_cs.c | 5 ++-- drivers/net/pcmcia/fmvj18x_cs.c | 5 ++-- drivers/net/pcmcia/ibmtr_cs.c | 5 ++-- drivers/net/pcmcia/nmclan_cs.c | 5 ++-- drivers/net/pcmcia/pcnet_cs.c | 7 ++--- drivers/net/pcmcia/smc91c92_cs.c | 9 +++--- drivers/net/pcmcia/xirc2ps_cs.c | 12 ++++---- drivers/net/wireless/airo_cs.c | 16 ++--------- drivers/net/wireless/atmel_cs.c | 16 ++--------- drivers/net/wireless/b43/pcmcia.c | 5 ++-- drivers/net/wireless/hostap/hostap_cs.c | 10 +++---- drivers/net/wireless/libertas/if_cs.c | 10 ++----- drivers/net/wireless/orinoco/orinoco_cs.c | 12 ++------ drivers/net/wireless/orinoco/spectrum_cs.c | 12 ++------ drivers/net/wireless/ray_cs.c | 5 ++-- drivers/net/wireless/wl3501_cs.c | 5 ++-- drivers/parport/parport_cs.c | 5 ++-- drivers/pcmcia/au1000_generic.h | 1 - drivers/pcmcia/au1000_pb1x00.c | 1 - drivers/pcmcia/cistpl.c | 1 - drivers/pcmcia/cs.c | 1 - drivers/pcmcia/cs_internal.h | 5 ---- drivers/pcmcia/ds.c | 3 +- drivers/pcmcia/i82092.c | 1 - drivers/pcmcia/i82365.c | 1 - drivers/pcmcia/m32r_cfc.c | 1 - drivers/pcmcia/m32r_pcc.c | 1 - drivers/pcmcia/m8xx_pcmcia.c | 1 - drivers/pcmcia/pcmcia_cis.c | 1 - drivers/pcmcia/pcmcia_resource.c | 33 +++++++++++----------- drivers/pcmcia/pd6729.c | 1 - drivers/pcmcia/rsrc_iodyn.c | 1 - drivers/pcmcia/rsrc_mgr.c | 1 - drivers/pcmcia/rsrc_nonstatic.c | 1 - drivers/pcmcia/sa1100_generic.c | 1 - drivers/pcmcia/soc_common.h | 1 - drivers/pcmcia/socket_sysfs.c | 1 - drivers/pcmcia/tcic.c | 1 - drivers/pcmcia/xxs1500_ss.c | 1 - drivers/pcmcia/yenta_socket.c | 1 - drivers/scsi/pcmcia/aha152x_stub.c | 5 ++-- drivers/scsi/pcmcia/fdomain_stub.c | 5 ++-- drivers/scsi/pcmcia/nsp_cs.c | 13 ++++----- drivers/scsi/pcmcia/qlogic_stub.c | 7 ++--- drivers/scsi/pcmcia/sym53c500_cs.c | 5 ++-- drivers/serial/serial_cs.c | 11 ++++---- drivers/ssb/main.c | 1 - drivers/ssb/pcmcia.c | 1 - drivers/ssb/scan.c | 1 - drivers/staging/comedi/drivers/cb_das16_cs.c | 11 ++------ drivers/staging/comedi/drivers/das08_cs.c | 17 ++---------- drivers/staging/comedi/drivers/ni_daq_700.c | 19 +++---------- drivers/staging/comedi/drivers/ni_daq_dio24.c | 19 +++---------- drivers/staging/comedi/drivers/ni_labpc_cs.c | 20 ++++---------- drivers/staging/comedi/drivers/ni_mio_cs.c | 5 ++-- drivers/staging/comedi/drivers/quatech_daqp_cs.c | 17 ++---------- drivers/staging/wlags49_h2/wl_cs.c | 7 ++--- drivers/staging/wlags49_h2/wl_internal.h | 1 - drivers/telephony/ixj_pcmcia.c | 3 +- drivers/usb/host/sl811_cs.c | 7 ++--- include/pcmcia/cs.h | 35 ------------------------ include/pcmcia/ds.h | 17 ++++++++---- include/pcmcia/ss.h | 1 - sound/pcmcia/pdaudiocf/pdaudiocf.c | 5 ++-- sound/pcmcia/pdaudiocf/pdaudiocf.h | 1 - sound/pcmcia/vx/vxpocket.c | 6 ++-- sound/pcmcia/vx/vxpocket.h | 1 - 90 files changed, 179 insertions(+), 395 deletions(-) delete mode 100644 include/pcmcia/cs.h (limited to 'drivers/mtd/maps/pcmciamtd.c') diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt index 86e0f491f85e..62a029f24f46 100644 --- a/Documentation/pcmcia/driver-changes.txt +++ b/Documentation/pcmcia/driver-changes.txt @@ -1,4 +1,10 @@ This file details changes in 2.6 which affect PCMCIA card driver authors: +* pcmcia_request_configuration -> pcmcia_enable_device (as of 2.6.36) + pcmcia_request_configuration() got renamed to pcmcia_enable_device(), + as it mirrors pcmcia_disable_device(). Configuration settings are now + stored in struct pcmcia_device, e.g. in the fields config_flags, + config_index, config_base, vpp. + * pcmcia_request_window changes (as of 2.6.36) Instead of win_req_t, drivers are now requested to fill out struct pcmcia_device *p_dev->resource[2,3,4,5] for up to four ioport diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index c2679c01188b..76da55d27e08 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -34,7 +34,6 @@ #include #include -#include #include #include #include @@ -249,7 +248,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) /* Set up attributes in order to probe card and get resources */ pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - pdev->conf.Attributes = CONF_ENABLE_IRQ; + pdev->config_flags |= CONF_ENABLE_IRQ; /* See if we have a manufacturer identifier. Use it to set is_kme for vendor quirks */ @@ -275,7 +274,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) if (!pdev->irq) goto failed; - ret = pcmcia_request_configuration(pdev, &pdev->conf); + ret = pcmcia_enable_device(pdev); if (ret) goto failed; diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c index 08f4818ad9f7..c9dd5b789d25 100644 --- a/drivers/bluetooth/bluecard_cs.c +++ b/drivers/bluetooth/bluecard_cs.c @@ -39,7 +39,6 @@ #include #include -#include #include #include #include @@ -865,7 +864,7 @@ static int bluecard_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; return bluecard_config(link); } @@ -905,7 +904,7 @@ static int bluecard_config(struct pcmcia_device *link) if (i != 0) goto failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) goto failed; diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index fb018073a5f8..3db95887cfd7 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -45,7 +45,6 @@ #include #include -#include #include #include #include @@ -660,7 +659,7 @@ static int bt3c_probe(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[0]->end = 8; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; return bt3c_config(link); } @@ -741,7 +740,7 @@ found_port: if (i != 0) goto failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) goto failed; diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index 897c7c74ca14..c5c43594ae0e 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -41,7 +41,6 @@ #include #include -#include #include #include #include @@ -589,7 +588,7 @@ static int btuart_probe(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[0]->end = 8; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; return btuart_config(link); } @@ -670,7 +669,7 @@ found_port: if (i != 0) goto failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) goto failed; diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c index b4c9a2e0a96b..38206df7206b 100644 --- a/drivers/bluetooth/dtl1_cs.c +++ b/drivers/bluetooth/dtl1_cs.c @@ -41,7 +41,6 @@ #include #include -#include #include #include #include @@ -575,7 +574,7 @@ static int dtl1_probe(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[0]->end = 8; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; return dtl1_config(link); } @@ -619,7 +618,7 @@ static int dtl1_config(struct pcmcia_device *link) if (i != 0) goto failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) goto failed; diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index d2accd64b3f5..75caa8c1b484 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -34,7 +34,6 @@ #include #include -#include #include #include #include @@ -1767,7 +1766,7 @@ static int cm4000_config(struct pcmcia_device * link, int devno) if (pcmcia_loop_config(link, cm4000_config_check, NULL)) goto cs_release; - if (pcmcia_request_configuration(link, &link->conf)) + if (pcmcia_enable_device(link)) goto cs_release; dev = link->priv; diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c index a32eba0afdfc..0c87b80bf641 100644 --- a/drivers/char/pcmcia/cm4040_cs.c +++ b/drivers/char/pcmcia/cm4040_cs.c @@ -29,7 +29,6 @@ #include #include -#include #include #include #include @@ -547,10 +546,10 @@ static int reader_config(struct pcmcia_device *link, int devno) if (pcmcia_loop_config(link, cm4040_config_check, NULL)) goto cs_release; - fail_rc = pcmcia_request_configuration(link, &link->conf); + fail_rc = pcmcia_enable_device(link); if (fail_rc != 0) { dev_printk(KERN_INFO, &link->dev, - "pcmcia_request_configuration failed 0x%x\n", + "pcmcia_enable_device failed 0x%x\n", fail_rc); goto cs_release; } diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c index 05c4e6834a6b..cd21b2bcdcd7 100644 --- a/drivers/char/pcmcia/ipwireless/main.c +++ b/drivers/char/pcmcia/ipwireless/main.c @@ -32,7 +32,6 @@ #include #include #include -#include static struct pcmcia_device_id ipw_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x02f2, 0x0100), @@ -172,7 +171,7 @@ static int config_ipwireless(struct ipw_dev *ipw) if (ret != 0) return ret; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; INIT_WORK(&ipw->work_reboot, signalled_reboot_work); @@ -210,8 +209,7 @@ static int config_ipwireless(struct ipw_dev *ipw) * Do the RequestConfiguration last, because it enables interrupts. * Then we don't get any interrupts before we're ready for them. */ - ret = pcmcia_request_configuration(link, &link->conf); - + ret = pcmcia_enable_device(link); if (ret != 0) goto exit; diff --git a/drivers/char/pcmcia/ipwireless/main.h b/drivers/char/pcmcia/ipwireless/main.h index 90402195855e..f2cbb116bccb 100644 --- a/drivers/char/pcmcia/ipwireless/main.h +++ b/drivers/char/pcmcia/ipwireless/main.h @@ -21,7 +21,6 @@ #include #include -#include #include #include diff --git a/drivers/char/pcmcia/ipwireless/tty.h b/drivers/char/pcmcia/ipwireless/tty.h index 3e163d4cab15..747b2d637860 100644 --- a/drivers/char/pcmcia/ipwireless/tty.h +++ b/drivers/char/pcmcia/ipwireless/tty.h @@ -21,7 +21,6 @@ #include #include -#include #include #include diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 535aa0899e9f..99feaedc53a1 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -70,7 +70,6 @@ #include #include -#include #include #include #include @@ -550,8 +549,6 @@ static int mgslpc_probe(struct pcmcia_device *link) /* Initialize the struct pcmcia_device structure */ - link->conf.Attributes = 0; - ret = mgslpc_config(link); if (ret) return ret; @@ -593,14 +590,14 @@ static int mgslpc_config(struct pcmcia_device *link) if (ret != 0) goto failed; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; link->config_index = 8; link->config_regs = PRESENT_OPTION; ret = pcmcia_request_irq(link, mgslpc_isr); if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -609,8 +606,7 @@ static int mgslpc_config(struct pcmcia_device *link) dev_info(&link->dev, "index 0x%02x:", link->config_index); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); + printk(", irq %d", link->irq); if (link->resource[0]) printk(", io %pR", link->resource[0]); printk("\n"); diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index 07e37876559c..87ad04925a9f 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -43,7 +43,6 @@ #include #include -#include #include #include #include @@ -99,7 +98,7 @@ static int ide_probe(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; return ide_config(link); } /* ide_attach */ @@ -284,7 +283,8 @@ static int ide_config(struct pcmcia_device *link) if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c index 2d8bbbf286aa..6ea5cd28d349 100644 --- a/drivers/isdn/hardware/avm/avm_cs.c +++ b/drivers/isdn/hardware/avm/avm_cs.c @@ -20,7 +20,6 @@ #include #include -#include #include #include #include @@ -79,7 +78,7 @@ static int avmcs_probe(struct pcmcia_device *p_dev) p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; /* General socket configuration */ - p_dev->conf.Attributes = CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; p_dev->config_index = 1; p_dev->config_regs = PRESENT_OPTION; @@ -149,7 +148,7 @@ static int avmcs_config(struct pcmcia_device *link) /* * configure the PCMCIA socket */ - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) { pcmcia_disable_device(link); break; diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c index e25f6c7376ed..5dd47ad6ecc9 100644 --- a/drivers/isdn/hisax/avma1_cs.c +++ b/drivers/isdn/hisax/avma1_cs.c @@ -20,7 +20,6 @@ #include #include -#include #include #include #include "hisax_cfg.h" @@ -84,7 +83,7 @@ static int __devinit avma1cs_probe(struct pcmcia_device *p_dev) p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_16; /* General socket configuration */ - p_dev->conf.Attributes = CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; p_dev->config_index = 1; p_dev->config_regs = PRESENT_OPTION; @@ -160,7 +159,7 @@ static int __devinit avma1cs_config(struct pcmcia_device *link) /* * configure the PCMCIA socket */ - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) { pcmcia_disable_device(link); break; diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c index f276e8428960..368c8a213f0b 100644 --- a/drivers/isdn/hisax/elsa_cs.c +++ b/drivers/isdn/hisax/elsa_cs.c @@ -46,7 +46,6 @@ #include #include -#include #include #include #include @@ -129,8 +128,6 @@ static int __devinit elsa_cs_probe(struct pcmcia_device *link) link->resource[0]->end = 8; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; - return elsa_cs_config(link); } /* elsa_cs_attach */ @@ -205,15 +202,14 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link) if (!link->irq) goto failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) goto failed; /* Finally, report what we've done */ dev_info(&link->dev, "index 0x%02x: ", link->config_index); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); + printk(", irq %d", link->irq); if (link->resource[0]) printk(" & %pR", link->resource[0]); if (link->resource[1]) diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index 43d0a4e97ead..791e23a75f78 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -46,7 +46,6 @@ #include #include -#include #include #include #include @@ -132,8 +131,6 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link) link->resource[0]->end = 8; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - link->conf.Attributes = 0; - return sedlbauer_config(link); } /* sedlbauer_attach */ @@ -175,7 +172,7 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev, /* Does this card need audio output? */ if (cfg->flags & CISTPL_CFTABLE_AUDIO) - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->config_flags |= CONF_ENABLE_SPKR; /* Use power settings for Vcc and Vpp if present */ /* Note that the CIS values need to be rescaled */ @@ -192,7 +189,7 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev, else if (dflt->vpp1.present & (1<vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->resource[0]->end = p_dev->resource[1]->end = 0; @@ -247,7 +244,7 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link) the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -256,8 +253,7 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link) link->config_index); if (link->vpp) printk(", Vpp %d.%d", link->vpp/10, link->vpp%10); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); + printk(", irq %d", link->irq); if (link->resource[0]) printk(" & %pR", link->resource[0]); if (link->resource[1]) diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c index 614afc64b5b1..2ae71e3297ba 100644 --- a/drivers/isdn/hisax/teles_cs.c +++ b/drivers/isdn/hisax/teles_cs.c @@ -27,7 +27,6 @@ #include #include -#include #include #include #include @@ -109,7 +108,7 @@ static int __devinit teles_probe(struct pcmcia_device *link) link->resource[0]->end = 96; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; return teles_cs_config(link); } /* teles_attach */ @@ -185,15 +184,14 @@ static int __devinit teles_cs_config(struct pcmcia_device *link) if (!link->irq) goto cs_failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) goto cs_failed; /* Finally, report what we've done */ dev_info(&link->dev, "index 0x%02x:", link->config_index); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); + printk(", irq %d", link->irq); if (link->resource[0]) printk(" & %pR", link->resource[0]); if (link->resource[1]) diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c index 7aa65bb2af4a..7a7273b09d9a 100644 --- a/drivers/mmc/host/sdricoh_cs.c +++ b/drivers/mmc/host/sdricoh_cs.c @@ -30,7 +30,6 @@ #include #include -#include #include #include #include diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c index 99c7257363d6..388db9ecf222 100644 --- a/drivers/mtd/maps/pcmciamtd.c +++ b/drivers/mtd/maps/pcmciamtd.c @@ -16,7 +16,6 @@ #include #include -#include #include #include @@ -568,7 +567,6 @@ static int pcmciamtd_config(struct pcmcia_device *link) dev->pcmcia_map.map_priv_2 = (unsigned long)link->resource[2]; dev->vpp = (vpp) ? vpp : link->socket->socket.Vpp; - link->conf.Attributes = 0; if(setvpp == 2) { link->vpp = dev->vpp; } else { @@ -577,7 +575,7 @@ static int pcmciamtd_config(struct pcmcia_device *link) link->config_index = 0; DEBUG(2, "Setting Configuration"); - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret != 0) { if (dev->win_base) { iounmap(dev->win_base); @@ -718,8 +716,6 @@ static int pcmciamtd_probe(struct pcmcia_device *link) dev->p_dev = link; link->priv = dev; - link->conf.Attributes = 0; - return pcmciamtd_config(link); } diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index 4b670b3da378..8abce76367f8 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -87,7 +87,6 @@ earlier 3Com products. #include #include -#include #include #include #include @@ -280,7 +279,7 @@ static int tc574_probe(struct pcmcia_device *link) spin_lock_init(&lp->window_lock); link->resource[0]->end = 32; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; link->config_index = 1; dev->netdev_ops = &el3_netdev_ops; @@ -351,7 +350,7 @@ static int tc574_config(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index 6549e2c496a0..34195c407fb2 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -41,7 +41,6 @@ #include #include -#include #include #include #include @@ -216,7 +215,7 @@ static int tc589_probe(struct pcmcia_device *link) link->resource[0]->end = 16; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; link->config_index = 1; dev->netdev_ops = &el3_netdev_ops; @@ -293,7 +292,7 @@ static int tc589_config(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 2c273ce6a5d8..f361d2865e34 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -39,7 +39,6 @@ #include #include "../8390.h" -#include #include #include #include @@ -166,7 +165,7 @@ static int axnet_probe(struct pcmcia_device *link) info = PRIV(dev); info->p_dev = link; link->priv = dev; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; dev->netdev_ops = &axnet_netdev_ops; @@ -332,11 +331,12 @@ static int axnet_config(struct pcmcia_device *link) if (!link->irq) goto failed; - + + link->config_flags |= CONF_ENABLE_IRQ; if (resource_size(link->resource[1]) == 8) - link->conf.Attributes |= CONF_ENABLE_SPKR; + link->config_flags |= CONF_ENABLE_SPKR; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c index a58eafed42a5..039731bddc27 100644 --- a/drivers/net/pcmcia/com20020_cs.c +++ b/drivers/net/pcmcia/com20020_cs.c @@ -43,7 +43,6 @@ #include #include -#include #include #include @@ -160,7 +159,7 @@ static int com20020_probe(struct pcmcia_device *p_dev) p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; p_dev->resource[0]->end = 16; - p_dev->conf.Attributes = CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; info->dev = dev; p_dev->priv = info; @@ -281,7 +280,7 @@ static int com20020_config(struct pcmcia_device *link) dev->irq = link->irq; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index 23f5333d8029..f6865adb126d 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -49,7 +49,6 @@ #include #include -#include #include #include #include @@ -252,7 +251,7 @@ static int fmvj18x_probe(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; /* General socket configuration */ - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; dev->netdev_ops = &fjn_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; @@ -431,7 +430,7 @@ static int fmvj18x_config(struct pcmcia_device *link) ret = pcmcia_request_irq(link, fjn_interrupt); if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index feedeeb17a52..b298a3d98dc8 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -57,7 +57,6 @@ #include #include -#include #include #include @@ -152,7 +151,7 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[0]->end = 4; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; link->config_regs = PRESENT_OPTION; info->dev = dev; @@ -269,7 +268,7 @@ static int __devinit ibmtr_config(struct pcmcia_device *link) resource_size(link->resource[3])); ti->sram_phys = link->resource[3]->start; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index 98c4a6976045..51bf76de6499 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -146,7 +146,6 @@ Include Files #include #include -#include #include #include #include @@ -460,7 +459,7 @@ static int nmclan_probe(struct pcmcia_device *link) spin_lock_init(&lp->bank_lock); link->resource[0]->end = 32; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; link->config_index = 1; link->config_regs = PRESENT_OPTION; @@ -649,7 +648,7 @@ static int nmclan_config(struct pcmcia_device *link) ret = pcmcia_request_exclusive_irq(link, mace_interrupt); if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 68c46751f84f..4a3b6a43550f 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -42,7 +42,6 @@ #include #include "../8390.h" -#include #include #include #include @@ -260,7 +259,7 @@ static int pcnet_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = dev; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; dev->netdev_ops = &pcnet_netdev_ops; @@ -560,13 +559,13 @@ static hw_info_t *pcnet_try_config(struct pcmcia_device *link, return NULL; if (resource_size(link->resource[1]) == 8) - link->conf.Attributes |= CONF_ENABLE_SPKR; + link->config_flags |= CONF_ENABLE_SPKR; if ((link->manf_id == MANFID_IBM) && (link->card_id == PRODID_IBM_HOME_AND_AWAY)) link->config_index |= 0x10; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) return NULL; diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index 59f5034e8d93..8c16ba672012 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -44,7 +44,6 @@ #include #include -#include #include #include #include @@ -326,7 +325,7 @@ static int smc91c92_probe(struct pcmcia_device *link) spin_lock_init(&smc->lock); link->resource[0]->end = 16; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; /* The SMC91c92-specific entries in the device structure. */ dev->netdev_ops = &smc_netdev_ops; @@ -444,7 +443,7 @@ static int mhz_mfc_config(struct pcmcia_device *link) unsigned int offset; int i; - link->conf.Attributes |= CONF_ENABLE_SPKR; + link->config_flags |= CONF_ENABLE_SPKR; link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[1]->end = 8; @@ -637,7 +636,7 @@ static int osi_config(struct pcmcia_device *link) static const unsigned int com[4] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 }; int i, j; - link->conf.Attributes |= CONF_ENABLE_SPKR; + link->config_flags |= CONF_ENABLE_SPKR; link->resource[0]->end = 64; link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[1]->end = 8; @@ -862,7 +861,7 @@ static int smc91c92_config(struct pcmcia_device *link) i = pcmcia_request_irq(link, smc_interrupt); if (i) goto config_failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i) goto config_failed; diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index 1c8ebf2df0c0..7a4a99b73d17 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -82,7 +82,6 @@ #include #include -#include #include #include #include @@ -529,7 +528,7 @@ xirc2ps_probe(struct pcmcia_device *link) link->priv = dev; /* General socket configuration */ - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; link->config_index = 1; /* Fill in card specific entries */ @@ -811,9 +810,6 @@ xirc2ps_config(struct pcmcia_device * link) if (local->modem) { int pass; - if (do_sound) - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->resource[1]->end = 8; link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; if (local->dingo) { @@ -863,7 +859,11 @@ xirc2ps_config(struct pcmcia_device * link) * This actually configures the PCMCIA socket -- setting up * the I/O windows and the interrupt mapping. */ - if ((err=pcmcia_request_configuration(link, &link->conf))) + link->config_flags |= CONF_ENABLE_IRQ; + if (do_sound) + link->config_flags |= CONF_ENABLE_SPKR; + + if ((err = pcmcia_enable_device(link))) goto config_error; if (local->dingo) { diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index 40f9ed760bb3..5939d0c7a5c8 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -32,7 +32,6 @@ #include #include -#include #include #include #include @@ -96,15 +95,6 @@ static int airo_probe(struct pcmcia_device *p_dev) dev_dbg(&p_dev->dev, "airo_attach()\n"); - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - p_dev->conf.Attributes = 0; - /* Allocate space for private device-specific data */ local = kzalloc(sizeof(local_info_t), GFP_KERNEL); if (!local) { @@ -158,7 +148,7 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev, /* Does this card need audio output? */ if (cfg->flags & CISTPL_CFTABLE_AUDIO) - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->config_flags |= CONF_ENABLE_SPKR; /* Use power settings for Vcc and Vpp if present */ /* Note that the CIS values need to be rescaled */ @@ -167,7 +157,7 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev, else if (dflt->vpp1.present & (1<vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->resource[0]->end = p_dev->resource[1]->end = 0; @@ -229,7 +219,7 @@ static int airo_config(struct pcmcia_device *link) the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; ((local_info_t *)link->priv)->eth_dev = diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index 8b75158caed7..080266eba985 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -42,7 +42,6 @@ #include #include -#include #include #include #include @@ -106,15 +105,6 @@ static int atmel_probe(struct pcmcia_device *p_dev) dev_dbg(&p_dev->dev, "atmel_attach()\n"); - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - p_dev->conf.Attributes = 0; - /* Allocate space for private device-specific data */ local = kzalloc(sizeof(local_info_t), GFP_KERNEL); if (!local) { @@ -175,7 +165,7 @@ static int atmel_config_check(struct pcmcia_device *p_dev, /* Does this card need audio output? */ if (cfg->flags & CISTPL_CFTABLE_AUDIO) - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->config_flags |= CONF_ENABLE_SPKR; /* Use power settings for Vcc and Vpp if present */ /* Note that the CIS values need to be rescaled */ @@ -184,7 +174,7 @@ static int atmel_config_check(struct pcmcia_device *p_dev, else if (dflt->vpp1.present & (1<vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->resource[0]->end = p_dev->resource[1]->end = 0; @@ -242,7 +232,7 @@ static int atmel_config(struct pcmcia_device *link) the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c index 138b26fcc75c..61abab1f1c7c 100644 --- a/drivers/net/wireless/b43/pcmcia.c +++ b/drivers/net/wireless/b43/pcmcia.c @@ -26,7 +26,6 @@ #include #include -#include #include #include #include @@ -72,7 +71,7 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) err = -ENODEV; - dev->conf.Attributes = CONF_ENABLE_IRQ; + dev->config_flags |= CONF_ENABLE_IRQ; dev->resource[2]->flags |= WIN_ENABLE | WIN_DATA_WIDTH_16 | WIN_USE_WAIT; @@ -89,7 +88,7 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) if (!dev->irq) goto err_disable; - res = pcmcia_request_configuration(dev, &dev->conf); + res = pcmcia_enable_device(dev); if (res != 0) goto err_disable; diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index 5704d3f9e1b7..5b0b5828b3cf 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -12,7 +12,6 @@ #include #include -#include #include #include #include @@ -484,7 +483,7 @@ static int prism2_config_check(struct pcmcia_device *p_dev, /* Does this card need audio output? */ if (cfg->flags & CISTPL_CFTABLE_AUDIO) - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->config_flags |= CONF_ENABLE_SPKR; /* Use power settings for Vcc and Vpp if present */ /* Note that the CIS values need to be rescaled */ @@ -510,7 +509,7 @@ static int prism2_config_check(struct pcmcia_device *p_dev, p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d " @@ -590,7 +589,7 @@ static int prism2_config(struct pcmcia_device *link) * the I/O windows and the interrupt mapping, and putting the * card and host interface into "Memory and IO" mode. */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed_unlock; @@ -605,8 +604,7 @@ static int prism2_config(struct pcmcia_device *link) if (link->vpp) printk(", Vpp %d.%d", link->vpp / 10, link->vpp % 10); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); + printk(", irq %d", link->irq); if (link->resource[0]) printk(" & %pR", link->resource[0]); if (link->resource[1]) diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index 814b7faaa365..6020c19b1bdb 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -28,7 +28,6 @@ #include #include -#include #include #include @@ -806,7 +805,7 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev, p_dev->resource[0]->end = cfg->io.win[0].len; /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ if (cfg->io.nwin != 1) { @@ -835,14 +834,11 @@ static int if_cs_probe(struct pcmcia_device *p_dev) card->p_dev = p_dev; p_dev->priv = card; - p_dev->conf.Attributes = 0; - if (pcmcia_loop_config(p_dev, if_cs_ioprobe, NULL)) { lbs_pr_err("error in pcmcia_loop_config\n"); goto out1; } - /* * Allocate an interrupt line. Note that this does not assign * a handler to the interrupt, unless the 'Handler' member of @@ -865,9 +861,9 @@ static int if_cs_probe(struct pcmcia_device *p_dev) * the I/O windows and the interrupt mapping, and putting the * card and host interface into "Memory and IO" mode. */ - ret = pcmcia_request_configuration(p_dev, &p_dev->conf); + ret = pcmcia_enable_device(p_dev); if (ret) { - lbs_pr_err("error in pcmcia_request_configuration\n"); + lbs_pr_err("error in pcmcia_enable_device\n"); goto out2; } diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index 1147d6bd4733..00316a1a1092 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include @@ -117,13 +116,6 @@ orinoco_cs_probe(struct pcmcia_device *link) card->p_dev = link; link->priv = priv; - /* General socket configuration defaults can go here. In this - * client, we assume very little, and rely on the CIS for - * almost everything. In most clients, many details (i.e., - * number, sizes, and attributes of IO windows) are fixed by - * the nature of the device, and can be hard-wired here. */ - link->conf.Attributes = 0; - return orinoco_cs_config(link); } /* orinoco_cs_attach */ @@ -187,7 +179,7 @@ static int orinoco_cs_config_check(struct pcmcia_device *p_dev, dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->resource[0]->end = p_dev->resource[1]->end = 0; @@ -266,7 +258,7 @@ orinoco_cs_config(struct pcmcia_device *link) * the I/O windows and the interrupt mapping, and putting the * card and host interface into "Memory and IO" mode. */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index 20b08ab87655..ca2c6c0c5576 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #include #include @@ -179,13 +178,6 @@ spectrum_cs_probe(struct pcmcia_device *link) card->p_dev = link; link->priv = priv; - /* General socket configuration defaults can go here. In this - * client, we assume very little, and rely on the CIS for - * almost everything. In most clients, many details (i.e., - * number, sizes, and attributes of IO windows) are fixed by - * the nature of the device, and can be hard-wired here. */ - link->conf.Attributes = 0; - return spectrum_cs_config(link); } /* spectrum_cs_attach */ @@ -249,7 +241,7 @@ static int spectrum_cs_config_check(struct pcmcia_device *p_dev, dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->resource[0]->end = p_dev->resource[1]->end = 0; @@ -329,7 +321,7 @@ spectrum_cs_config(struct pcmcia_device *link) * the I/O windows and the interrupt mapping, and putting the * card and host interface into "Memory and IO" mode. */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index 7fb66cc1e9fd..1457f34efa9a 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -46,7 +46,6 @@ #include #include -#include #include #include #include @@ -318,7 +317,7 @@ static int ray_probe(struct pcmcia_device *p_dev) p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; /* General socket configuration */ - p_dev->conf.Attributes = CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; p_dev->config_index = 1; p_dev->priv = dev; @@ -413,7 +412,7 @@ static int ray_config(struct pcmcia_device *link) /* This actually configures the PCMCIA socket -- setting up the I/O windows and the interrupt mapping. */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index 3947cf8e63c5..101b6ffd560e 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -48,7 +48,6 @@ #include -#include #include #include #include @@ -1888,7 +1887,7 @@ static int wl3501_probe(struct pcmcia_device *p_dev) p_dev->resource[0]->flags = IO_DATA_PATH_WIDTH_8; /* General socket configuration */ - p_dev->conf.Attributes = CONF_ENABLE_IRQ; + p_dev->config_flags = CONF_ENABLE_IRQ; p_dev->config_index = 1; dev = alloc_etherdev(sizeof(struct wl3501_card)); @@ -1954,7 +1953,7 @@ static int wl3501_config(struct pcmcia_device *link) /* This actually configures the PCMCIA socket -- setting up the I/O * windows and the interrupt mapping. */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c index 8faf634987e3..63b3d3c18c34 100644 --- a/drivers/parport/parport_cs.c +++ b/drivers/parport/parport_cs.c @@ -48,7 +48,6 @@ #include #include -#include #include #include #include @@ -103,7 +102,7 @@ static int parport_probe(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; return parport_config(link); } /* parport_attach */ @@ -172,7 +171,7 @@ static int parport_config(struct pcmcia_device *link) if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/pcmcia/au1000_generic.h b/drivers/pcmcia/au1000_generic.h index 67530cefcf3c..5c36bda2963b 100644 --- a/drivers/pcmcia/au1000_generic.h +++ b/drivers/pcmcia/au1000_generic.h @@ -23,7 +23,6 @@ /* include the world */ -#include #include #include #include "cs_internal.h" diff --git a/drivers/pcmcia/au1000_pb1x00.c b/drivers/pcmcia/au1000_pb1x00.c index 807f2d75dad3..b2396647a165 100644 --- a/drivers/pcmcia/au1000_pb1x00.c +++ b/drivers/pcmcia/au1000_pb1x00.c @@ -31,7 +31,6 @@ #include #include -#include #include #include diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c index 91414a0ddc44..884a984216fe 100644 --- a/drivers/pcmcia/cistpl.c +++ b/drivers/pcmcia/cistpl.c @@ -28,7 +28,6 @@ #include #include -#include #include #include #include "cs_internal.h" diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index 2ec8ac97445c..d8189d4061fc 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -33,7 +33,6 @@ #include #include -#include #include #include #include diff --git a/drivers/pcmcia/cs_internal.h b/drivers/pcmcia/cs_internal.h index 42eef437afd4..7f1953f78b12 100644 --- a/drivers/pcmcia/cs_internal.h +++ b/drivers/pcmcia/cs_internal.h @@ -33,14 +33,9 @@ typedef struct config_t { struct kref ref; unsigned int state; - unsigned int Attributes; struct resource io[MAX_IO_WIN]; /* io ports */ struct resource mem[MAX_WIN]; /* mem areas */ - - struct { - u_int Attributes; - } irq; } config_t; diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 00db60053f93..dd43bd33a9e3 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -26,7 +26,6 @@ #include #include -#include #include #include #include @@ -1178,7 +1177,7 @@ static int pcmcia_dev_resume(struct device *dev) if (p_dev->device_no == p_dev->func) { dev_dbg(dev, "requesting configuration\n"); - ret = pcmcia_request_configuration(p_dev, &p_dev->conf); + ret = pcmcia_enable_device(p_dev); if (ret) goto out; } diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c index 05d0879ce935..fc7906eaf228 100644 --- a/drivers/pcmcia/i82092.c +++ b/drivers/pcmcia/i82092.c @@ -16,7 +16,6 @@ #include #include -#include #include #include diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c index 61746bd598b3..72a033a2acdb 100644 --- a/drivers/pcmcia/i82365.c +++ b/drivers/pcmcia/i82365.c @@ -51,7 +51,6 @@ #include #include -#include #include diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c index 24de49925863..2adb0106a039 100644 --- a/drivers/pcmcia/m32r_cfc.c +++ b/drivers/pcmcia/m32r_cfc.c @@ -27,7 +27,6 @@ #include #include -#include #undef MAX_IO_WIN /* FIXME */ #define MAX_IO_WIN 1 diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c index 8e4723844ad3..1511ff71c87b 100644 --- a/drivers/pcmcia/m32r_pcc.c +++ b/drivers/pcmcia/m32r_pcc.c @@ -28,7 +28,6 @@ #include #include -#include /* XXX: should be moved into asm/irq.h */ #define PCC0_IRQ 24 diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c index f0ecad99ce81..99d4f23cb435 100644 --- a/drivers/pcmcia/m8xx_pcmcia.c +++ b/drivers/pcmcia/m8xx_pcmcia.c @@ -59,7 +59,6 @@ #include #include -#include #include #define pcmcia_info(args...) printk(KERN_INFO "m8xx_pcmcia: "args) diff --git a/drivers/pcmcia/pcmcia_cis.c b/drivers/pcmcia/pcmcia_cis.c index ac47cc4e20e8..ce8b94a3b675 100644 --- a/drivers/pcmcia/pcmcia_cis.c +++ b/drivers/pcmcia/pcmcia_cis.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include "cs_internal.h" diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index a1fb0dc1a71f..28de5e6e164c 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -26,7 +26,6 @@ #include #include -#include #include #include #include @@ -230,7 +229,7 @@ EXPORT_SYMBOL(pcmcia_map_mem_page); * pcmcia_fixup_iowidth() - reduce io width to 8bit * * pcmcia_fixup_iowidth() allows a PCMCIA device driver to reduce the - * IO width to 8bit after having called pcmcia_request_configuration() + * IO width to 8bit after having called pcmcia_enable_device() * previously. */ int pcmcia_fixup_iowidth(struct pcmcia_device *p_dev) @@ -278,7 +277,7 @@ EXPORT_SYMBOL(pcmcia_fixup_iowidth); * pcmcia_fixup_vpp() - set Vpp to a new voltage level * * pcmcia_fixup_vpp() allows a PCMCIA device driver to set Vpp to - * a new voltage level between calls to pcmcia_request_configuration() + * a new voltage level between calls to pcmcia_enable_device() * and pcmcia_disable_device(). */ int pcmcia_fixup_vpp(struct pcmcia_device *p_dev, unsigned char new_vpp) @@ -432,18 +431,21 @@ int pcmcia_release_window(struct pcmcia_device *p_dev, struct resource *res) } /* pcmcia_release_window */ EXPORT_SYMBOL(pcmcia_release_window); - -int pcmcia_request_configuration(struct pcmcia_device *p_dev, - config_req_t *req) +/** + * pcmcia_enable_device() - set up and activate a PCMCIA device + * + */ +int pcmcia_enable_device(struct pcmcia_device *p_dev) { int i; - u_int base; + unsigned int base; struct pcmcia_socket *s = p_dev->socket; config_t *c; pccard_io_map iomap; unsigned char status = 0; unsigned char ext_status = 0; unsigned char option = 0; + unsigned int flags = p_dev->config_flags; if (!(s->state & SOCKET_PRESENT)) return -ENODEV; @@ -466,23 +468,20 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev, } /* Pick memory or I/O card, DMA mode, interrupt */ - c->Attributes = req->Attributes; if (p_dev->_io) s->socket.flags |= SS_IOCARD; - if (req->Attributes & CONF_ENABLE_DMA) - s->socket.flags |= SS_DMA_MODE; - if (req->Attributes & CONF_ENABLE_SPKR) { + if (flags & CONF_ENABLE_SPKR) { s->socket.flags |= SS_SPKR_ENA; status = CCSR_AUDIO_ENA; if (!(p_dev->config_regs & PRESENT_STATUS)) dev_warn(&p_dev->dev, "speaker requested, but " "PRESENT_STATUS not set!\n"); } - if (req->Attributes & CONF_ENABLE_IRQ) + if (flags & CONF_ENABLE_IRQ) s->socket.io_irq = s->pcmcia_irq; else s->socket.io_irq = 0; - if (req->Attributes & CONF_ENABLE_ESR) { + if (flags & CONF_ENABLE_ESR) { p_dev->config_regs |= PRESENT_EXT_STATUS; ext_status = ESR_REQ_ATTN_ENA; } @@ -510,8 +509,8 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev, if (p_dev->config_regs & PRESENT_IOBASE_0) option |= COR_ADDR_DECODE; } - if ((req->Attributes & CONF_ENABLE_IRQ) && - !(req->Attributes & CONF_ENABLE_PULSE_IRQ)) + if ((flags & CONF_ENABLE_IRQ) && + !(flags & CONF_ENABLE_PULSE_IRQ)) option |= COR_LEVEL_REQ; pcmcia_write_cis_mem(s, 1, (base + CISREG_COR)>>1, 1, &option); mdelay(40); @@ -560,8 +559,8 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev, p_dev->_locked = 1; mutex_unlock(&s->ops_mutex); return 0; -} /* pcmcia_request_configuration */ -EXPORT_SYMBOL(pcmcia_request_configuration); +} /* pcmcia_enable_device */ +EXPORT_SYMBOL(pcmcia_enable_device); /** diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c index deef6656ab7b..8cbfa067171f 100644 --- a/drivers/pcmcia/pd6729.c +++ b/drivers/pcmcia/pd6729.c @@ -18,7 +18,6 @@ #include #include -#include #include diff --git a/drivers/pcmcia/rsrc_iodyn.c b/drivers/pcmcia/rsrc_iodyn.c index 8510c35d2952..523eb691c30b 100644 --- a/drivers/pcmcia/rsrc_iodyn.c +++ b/drivers/pcmcia/rsrc_iodyn.c @@ -17,7 +17,6 @@ #include #include -#include #include #include "cs_internal.h" diff --git a/drivers/pcmcia/rsrc_mgr.c b/drivers/pcmcia/rsrc_mgr.c index 4e80421fd908..aa628ed0e9f4 100644 --- a/drivers/pcmcia/rsrc_mgr.c +++ b/drivers/pcmcia/rsrc_mgr.c @@ -17,7 +17,6 @@ #include #include -#include #include #include "cs_internal.h" diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index 96f348b35fde..b187555d4388 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -29,7 +29,6 @@ #include #include -#include #include #include "cs_internal.h" diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c index e09851480295..945857f8c284 100644 --- a/drivers/pcmcia/sa1100_generic.c +++ b/drivers/pcmcia/sa1100_generic.c @@ -35,7 +35,6 @@ #include #include -#include #include #include diff --git a/drivers/pcmcia/soc_common.h b/drivers/pcmcia/soc_common.h index 3fba3a679128..bbcd5385a221 100644 --- a/drivers/pcmcia/soc_common.h +++ b/drivers/pcmcia/soc_common.h @@ -11,7 +11,6 @@ /* include the world */ #include -#include #include #include diff --git a/drivers/pcmcia/socket_sysfs.c b/drivers/pcmcia/socket_sysfs.c index cb0d3ace18bd..71aeed93037c 100644 --- a/drivers/pcmcia/socket_sysfs.c +++ b/drivers/pcmcia/socket_sysfs.c @@ -27,7 +27,6 @@ #include #include -#include #include #include #include diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c index be0d841c7ebd..310160bffe38 100644 --- a/drivers/pcmcia/tcic.c +++ b/drivers/pcmcia/tcic.c @@ -49,7 +49,6 @@ #include #include -#include #include #include "tcic.h" diff --git a/drivers/pcmcia/xxs1500_ss.c b/drivers/pcmcia/xxs1500_ss.c index fa88c360c37a..3b67a1b6a197 100644 --- a/drivers/pcmcia/xxs1500_ss.c +++ b/drivers/pcmcia/xxs1500_ss.c @@ -17,7 +17,6 @@ #include #include -#include #include #include diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c index 414d9a6f9a32..408dbaa080a1 100644 --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -20,7 +20,6 @@ #include #include -#include #include "yenta_socket.h" #include "i82365.h" diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c index c3682492af16..e1f748517135 100644 --- a/drivers/scsi/pcmcia/aha152x_stub.c +++ b/drivers/scsi/pcmcia/aha152x_stub.c @@ -49,7 +49,6 @@ #include #include "aha152x.h" -#include #include #include @@ -102,7 +101,7 @@ static int aha152x_probe(struct pcmcia_device *link) link->resource[0]->end = 0x20; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; link->config_regs = PRESENT_OPTION; return aha152x_config_cs(link); @@ -159,7 +158,7 @@ static int aha152x_config_cs(struct pcmcia_device *link) if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c index bb909e1b7c68..ae263b17bfa5 100644 --- a/drivers/scsi/pcmcia/fdomain_stub.c +++ b/drivers/scsi/pcmcia/fdomain_stub.c @@ -46,7 +46,6 @@ #include #include "fdomain.h" -#include #include #include @@ -85,7 +84,7 @@ static int fdomain_probe(struct pcmcia_device *link) link->priv = info; link->resource[0]->end = 0x10; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; link->config_regs = PRESENT_OPTION; return fdomain_config(link); @@ -131,7 +130,7 @@ static int fdomain_config(struct pcmcia_device *link) if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index a5648e9c4f6e..d0546c03f57c 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -47,7 +47,6 @@ #include #include -#include #include #include #include @@ -1562,7 +1561,7 @@ static int nsp_cs_probe(struct pcmcia_device *link) link->resource[0]->flags = IO_DATA_PATH_WIDTH_AUTO; /* General socket configuration */ - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; ret = nsp_cs_config(link); @@ -1608,7 +1607,7 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev, /* Does this card need audio output? */ if (cfg->flags & CISTPL_CFTABLE_AUDIO) - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->config_flags |= CONF_ENABLE_SPKR; /* Use power settings for Vcc and Vpp if present */ /* Note that the CIS values need to be rescaled */ @@ -1629,7 +1628,7 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev, } /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->resource[0]->end = p_dev->resource[1]->end = 0; @@ -1700,7 +1699,7 @@ static int nsp_cs_config(struct pcmcia_device *link) if (pcmcia_request_irq(link, nspintr)) goto cs_failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto cs_failed; @@ -1749,9 +1748,7 @@ static int nsp_cs_config(struct pcmcia_device *link) if (link->vpp) { printk(", Vpp %d.%d", link->vpp/10, link->vpp%10); } - if (link->conf.Attributes & CONF_ENABLE_IRQ) { - printk(", irq %d", link->irq); - } + printk(", irq %d", link->irq); if (link->resource[0]) printk(", io %pR", link->resource[0]); if (link->resource[1]) diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c index 5e2cbe091408..7d3f49c431fd 100644 --- a/drivers/scsi/pcmcia/qlogic_stub.c +++ b/drivers/scsi/pcmcia/qlogic_stub.c @@ -48,7 +48,6 @@ #include #include "../qlogicfas408.h" -#include #include #include #include @@ -158,7 +157,7 @@ static int qlogic_probe(struct pcmcia_device *link) link->priv = info; link->resource[0]->end = 16; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; link->config_regs = PRESENT_OPTION; return qlogic_config(link); @@ -208,7 +207,7 @@ static int qlogic_config(struct pcmcia_device * link) if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -263,7 +262,7 @@ static int qlogic_resume(struct pcmcia_device *link) { scsi_info_t *info = link->priv; - pcmcia_request_configuration(link, &link->conf); + pcmcia_enable_device(link); if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) { diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c index 9aaf974d4d1c..600630eb7034 100644 --- a/drivers/scsi/pcmcia/sym53c500_cs.c +++ b/drivers/scsi/pcmcia/sym53c500_cs.c @@ -71,7 +71,6 @@ #include #include -#include #include #include #include @@ -721,7 +720,7 @@ SYM53C500_config(struct pcmcia_device *link) if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -861,7 +860,7 @@ SYM53C500_probe(struct pcmcia_device *link) link->priv = info; link->resource[0]->end = 16; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; return SYM53C500_config(link); } /* SYM53C500_attach */ diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index ee19f2d25c20..47b1869026e7 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -45,7 +45,6 @@ #include #include -#include #include #include #include @@ -184,7 +183,7 @@ static void quirk_config_socket(struct pcmcia_device *link) struct serial_info *info = link->priv; if (info->multi) - link->conf.Attributes |= CONF_ENABLE_ESR; + link->config_flags |= CONF_ENABLE_ESR; } static const struct serial_quirk quirks[] = { @@ -333,9 +332,9 @@ static int serial_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; if (do_sound) - link->conf.Attributes |= CONF_ENABLE_SPKR; + link->config_flags |= CONF_ENABLE_SPKR; return serial_config(link); } @@ -503,7 +502,7 @@ found_port: if (info->quirk && info->quirk->config) info->quirk->config(link); - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) return -1; return setup_serial(link, info, link->resource[0]->start, link->irq); @@ -579,7 +578,7 @@ static int multi_config(struct pcmcia_device *link) if (info->quirk && info->quirk->config) info->quirk->config(link); - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) return -ENODEV; diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index 7892ac163522..c68b3dc19e11 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -20,7 +20,6 @@ #include #include -#include #include #include diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c index 526682d68de8..c7345dbf43fa 100644 --- a/drivers/ssb/pcmcia.c +++ b/drivers/ssb/pcmcia.c @@ -13,7 +13,6 @@ #include #include -#include #include #include #include diff --git a/drivers/ssb/scan.c b/drivers/ssb/scan.c index 9738cad4ba13..ee079ab9fb28 100644 --- a/drivers/ssb/scan.c +++ b/drivers/ssb/scan.c @@ -17,7 +17,6 @@ #include #include -#include #include #include diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c index 034cbfcba196..ee91c89511ed 100644 --- a/drivers/staging/comedi/drivers/cb_das16_cs.c +++ b/drivers/staging/comedi/drivers/cb_das16_cs.c @@ -37,7 +37,6 @@ Status: experimental #include #include -#include #include #include @@ -692,9 +691,6 @@ static int das16cs_pcmcia_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* Initialize the pcmcia_device structure */ - link->conf.Attributes = 0; - cur_dev = link; das16cs_pcmcia_config(link); @@ -723,7 +719,7 @@ static int das16cs_pcmcia_config_loop(struct pcmcia_device *p_dev, return -EINVAL; /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->resource[0]->end = p_dev->resource[1]->end = 0; @@ -767,14 +763,13 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link) the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; /* Finally, report what we've done */ dev_info(&link->dev, "index 0x%02x", link->config_index); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %u", link->irq); + printk(", irq %u", link->irq); if (link->resource[0]) printk(", io %pR", link->resource[0]); if (link->resource[1]) diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c index e37ea79e6aea..f8f3de57b413 100644 --- a/drivers/staging/comedi/drivers/das08_cs.c +++ b/drivers/staging/comedi/drivers/das08_cs.c @@ -48,7 +48,6 @@ Command support does not exist, but could be added for this board. #include "das08.h" /* pcmcia includes */ -#include #include #include @@ -162,15 +161,6 @@ static int das08_pcmcia_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->conf.Attributes = 0; - cur_dev = link; das08_pcmcia_config(link); @@ -211,7 +201,7 @@ static int das08_pcmcia_config_loop(struct pcmcia_device *p_dev, return -ENODEV; /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->resource[0]->end = p_dev->resource[1]->end = 0; @@ -263,14 +253,13 @@ static void das08_pcmcia_config(struct pcmcia_device *link) the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; /* Finally, report what we've done */ dev_info(&link->dev, "index 0x%02x", link->config_index); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %u", link->irq); + printk(", irq %u", link->irq); if (link->resource[0]) printk(", io %pR", link->resource[0]); if (link->resource[1]) diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c index 8107e4009248..803683b83543 100644 --- a/drivers/staging/comedi/drivers/ni_daq_700.c +++ b/drivers/staging/comedi/drivers/ni_daq_700.c @@ -47,7 +47,6 @@ IRQ is assigned but not used. #include -#include #include #include #include @@ -491,15 +490,6 @@ static int dio700_cs_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->conf.Attributes = 0; - pcmcia_cur_dev = link; dio700_config(link); @@ -550,10 +540,10 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev, /* Does this card need audio output? */ if (cfg->flags & CISTPL_CFTABLE_AUDIO) - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->config_flags |= CONF_ENABLE_SPKR; /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->resource[0]->end = p_dev->resource[1]->end = 0; @@ -602,14 +592,13 @@ static void dio700_config(struct pcmcia_device *link) the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret != 0) goto failed; /* Finally, report what we've done */ dev_info(&link->dev, "index 0x%02x", link->config_index); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); + printk(", irq %d", link->irq); if (link->resource[0]) printk(", io %pR", link->resource[0]); if (link->resource[1]) diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c index 4f9daa3558aa..6512f7a283ce 100644 --- a/drivers/staging/comedi/drivers/ni_daq_dio24.c +++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c @@ -48,7 +48,6 @@ the PCMCIA interface. #include "8255.h" -#include #include #include #include @@ -243,15 +242,6 @@ static int dio24_cs_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->conf.Attributes = 0; - pcmcia_cur_dev = link; dio24_config(link); @@ -302,10 +292,10 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev, /* Does this card need audio output? */ if (cfg->flags & CISTPL_CFTABLE_AUDIO) - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->config_flags |= CONF_ENABLE_SPKR; /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->resource[0]->end = p_dev->resource[1]->end = 0; @@ -353,14 +343,13 @@ static void dio24_config(struct pcmcia_device *link) the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; /* Finally, report what we've done */ dev_info(&link->dev, "index 0x%02x", link->config_index); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); + printk(", irq %d", link->irq); if (link->resource[0]) printk(" & %pR", link->resource[0]); if (link->resource[1]) diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c index 2e27a3048cb8..255cf40c5fd1 100644 --- a/drivers/staging/comedi/drivers/ni_labpc_cs.c +++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c @@ -71,7 +71,6 @@ NI manuals: #include "comedi_fc.h" #include "ni_labpc.h" -#include #include #include #include @@ -219,15 +218,6 @@ static int labpc_cs_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->conf.Attributes = 0; - pcmcia_cur_dev = link; labpc_config(link); @@ -281,10 +271,10 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev, /* Does this card need audio output? */ if (cfg->flags & CISTPL_CFTABLE_AUDIO) - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->config_flags |= CONF_ENABLE_SPKR; /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; /* IO window settings */ p_dev->resource[0]->end = p_dev->resource[1]->end = 0; @@ -331,14 +321,14 @@ static void labpc_config(struct pcmcia_device *link) the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - ret = pcmcia_request_configuration(link, &link->conf); + p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; + ret = pcmcia_enable_device(link); if (ret) goto failed; /* Finally, report what we've done */ dev_info(&link->dev, "index 0x%02x", link->config_index); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); + printk(", irq %d", link->irq); if (link->resource[0]) printk(" & %pR", link->resource[0]); if (link->resource[1]) diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c index be7e021e576d..b88f52dd08d0 100644 --- a/drivers/staging/comedi/drivers/ni_mio_cs.c +++ b/drivers/staging/comedi/drivers/ni_mio_cs.c @@ -48,7 +48,6 @@ See the notes in the ni_atmio.o driver. #include "ni_stc.h" #include "8255.h" -#include #include #include @@ -265,7 +264,7 @@ static int cs_attach(struct pcmcia_device *link) { link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; link->resource[0]->end = 16; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; cur_dev = link; @@ -336,7 +335,7 @@ static void mio_cs_config(struct pcmcia_device *link) if (!link->irq) dev_info(&link->dev, "no IRQ available\n"); - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); } static int mio_cs_attach(struct comedi_device *dev, struct comedi_devconfig *it) diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c index a2a32de044c8..b8940d7f4155 100644 --- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c +++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c @@ -50,7 +50,6 @@ Devices: [Quatech] DAQP-208 (daqp), DAQP-308 #include "../comedidev.h" #include -#include #include #include #include @@ -1031,15 +1030,6 @@ static int daqp_cs_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->conf.Attributes = 0; - daqp_cs_config(link); return 0; @@ -1088,7 +1078,7 @@ static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev, return -ENODEV; /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->resource[0]->end = p_dev->resource[1]->end = 0; @@ -1132,14 +1122,13 @@ static void daqp_cs_config(struct pcmcia_device *link) the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; /* Finally, report what we've done */ dev_info(&link->dev, "index 0x%02x", link->config_index); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %u", link->irq); + printk(", irq %u", link->irq); if (link->resource[0]) printk(" & %pR", link->resource[0]); if (link->resource[1]) diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c index 778800f1e464..62a70afa3e29 100644 --- a/drivers/staging/wlags49_h2/wl_cs.c +++ b/drivers/staging/wlags49_h2/wl_cs.c @@ -83,7 +83,6 @@ #include #include -#include #include #include #include @@ -147,7 +146,7 @@ static int wl_adapter_attach(struct pcmcia_device *link) link->resource[0]->end = HCF_NUM_IO_PORTS; link->resource[0]->flags= IO_DATA_PATH_WIDTH_16; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; link->config_index = 5; link->config_regs = PRESENT_OPTION; @@ -301,7 +300,7 @@ void wl_adapter_insert(struct pcmcia_device *link) dev = link->priv; /* Do we need to allocate an interrupt? */ - link->conf.Attributes |= CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; link->io_lines = 6; ret = pcmcia_request_io(link); @@ -312,7 +311,7 @@ void wl_adapter_insert(struct pcmcia_device *link) if (ret != 0) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret != 0) goto failed; diff --git a/drivers/staging/wlags49_h2/wl_internal.h b/drivers/staging/wlags49_h2/wl_internal.h index 02f0a20e178a..cd129b3ee6c0 100644 --- a/drivers/staging/wlags49_h2/wl_internal.h +++ b/drivers/staging/wlags49_h2/wl_internal.h @@ -69,7 +69,6 @@ ******************************************************************************/ #include #ifdef BUS_PCMCIA -#include #include #include #include diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c index 5ccc6d0560a9..e23270d1b4d1 100644 --- a/drivers/telephony/ixj_pcmcia.c +++ b/drivers/telephony/ixj_pcmcia.c @@ -8,7 +8,6 @@ #include /* error codes */ #include -#include #include #include @@ -143,7 +142,7 @@ static int ixj_config(struct pcmcia_device * link) if (pcmcia_loop_config(link, ixj_config_check, &dflt)) goto failed; - if (pcmcia_request_configuration(link, &link->conf)) + if (pcmcia_enable_device(link)) goto failed; /* diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index 590405361bed..744c2cd809f1 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -20,7 +20,6 @@ #include #include -#include #include #include #include @@ -159,7 +158,7 @@ static int sl811_cs_config_check(struct pcmcia_device *p_dev, dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; /* we need an interrupt */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->config_flags |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->resource[0]->end = p_dev->resource[1]->end = 0; @@ -195,7 +194,7 @@ static int sl811_cs_config(struct pcmcia_device *link) if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -227,8 +226,6 @@ static int sl811_cs_probe(struct pcmcia_device *link) local->p_dev = link; link->priv = local; - link->conf.Attributes = 0; - return sl811_cs_config(link); } diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h deleted file mode 100644 index 47b6092c4ed6..000000000000 --- a/include/pcmcia/cs.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * cs.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * The initial developer of the original code is David A. Hinds - * . Portions created by David A. Hinds - * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. - * - * (C) 1999 David A. Hinds - */ - -#ifndef _LINUX_CS_H -#define _LINUX_CS_H - -#ifdef __KERNEL__ -#include -#endif - -/* For RequestConfiguration */ -typedef struct config_req_t { - u_int Attributes; -} config_req_t; - -/* Attributes for RequestConfiguration */ -#define CONF_ENABLE_IRQ 0x01 -#define CONF_ENABLE_DMA 0x02 -#define CONF_ENABLE_SPKR 0x04 -#define CONF_ENABLE_PULSE_IRQ 0x08 -#define CONF_ENABLE_ESR 0x10 -#define CONF_VALID_CLIENT 0x100 - -#endif /* _LINUX_CS_H */ diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h index bc28f96d0b5a..50b03fd67fd6 100644 --- a/include/pcmcia/ds.h +++ b/include/pcmcia/ds.h @@ -24,9 +24,11 @@ #ifdef __KERNEL__ #include +#include #include #include + /* * PCMCIA device drivers (16-bit cards only; 32-bit cards require CardBus * a.k.a. PCI drivers @@ -88,18 +90,16 @@ struct pcmcia_device { struct list_head socket_device_list; - /* deprecated, will be cleaned up soon */ - config_req_t conf; - /* device setup */ unsigned int irq; struct resource *resource[PCMCIA_NUM_RESOURCES]; unsigned int vpp; - unsigned int io_lines; /* number of I/O lines */ + unsigned int config_flags; /* CONF_ENABLE_ flags below */ unsigned int config_base; unsigned int config_index; unsigned int config_regs; /* PRESENT_ flags below */ + unsigned int io_lines; /* number of I/O lines */ /* Is the device suspended? */ u16 suspended:1; @@ -207,8 +207,7 @@ pcmcia_request_exclusive_irq(struct pcmcia_device *p_dev, int __must_check pcmcia_request_irq(struct pcmcia_device *p_dev, irq_handler_t handler); -int pcmcia_request_configuration(struct pcmcia_device *p_dev, - config_req_t *req); +int pcmcia_enable_device(struct pcmcia_device *p_dev); int pcmcia_request_window(struct pcmcia_device *p_dev, struct resource *res, unsigned int speed); @@ -265,6 +264,12 @@ static inline int pcmcia_io_cfg_data_width(unsigned int flags) #define PRESENT_IOBASE_3 0x100 #define PRESENT_IOSIZE 0x200 +/* flags to be passed to pcmcia_enable_device() */ +#define CONF_ENABLE_IRQ 0x01 +#define CONF_ENABLE_SPKR 0x02 +#define CONF_ENABLE_PULSE_IRQ 0x04 +#define CONF_ENABLE_ESR 0x08 + #endif /* __KERNEL__ */ #endif /* _LINUX_DS_H */ diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h index 626b63c33d9e..731cde010f42 100644 --- a/include/pcmcia/ss.h +++ b/include/pcmcia/ss.h @@ -19,7 +19,6 @@ #include /* task_struct, completion */ #include -#include #ifdef CONFIG_CARDBUS #include #endif diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c index 4df07fce637f..2476d5f0a14f 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf.c +++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c @@ -142,7 +142,7 @@ static int snd_pdacf_probe(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->resource[0]->end = 16; - link->conf.Attributes = CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; + link->config_flags = CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; link->config_index = 1; link->config_regs = PRESENT_OPTION; @@ -217,6 +217,7 @@ static int pdacf_config(struct pcmcia_device *link) snd_printdd(KERN_DEBUG "pdacf_config called\n"); link->config_index = 0x5; + link->config_flags |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; ret = pcmcia_request_io(link); if (ret) @@ -226,7 +227,7 @@ static int pdacf_config(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.h b/sound/pcmcia/pdaudiocf/pdaudiocf.h index 5cc3e4573074..bd26e092aead 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf.h +++ b/sound/pcmcia/pdaudiocf/pdaudiocf.h @@ -24,7 +24,6 @@ #include #include #include -#include #include #include diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c index 16186adc1bdc..017a8d6c510d 100644 --- a/sound/pcmcia/vx/vxpocket.c +++ b/sound/pcmcia/vx/vxpocket.c @@ -2,7 +2,7 @@ * Driver for Digigram VXpocket V2/440 soundcards * * Copyright (c) 2002 by Takashi Iwai - * + * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -162,7 +162,7 @@ static int snd_vxpocket_new(struct snd_card *card, int ibl, link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->resource[0]->end = 16; - link->conf.Attributes = CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; link->config_index = 1; link->config_regs = PRESENT_OPTION; @@ -233,7 +233,7 @@ static int vxpocket_config(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/sound/pcmcia/vx/vxpocket.h b/sound/pcmcia/vx/vxpocket.h index d9110669d042..13d658c1a216 100644 --- a/sound/pcmcia/vx/vxpocket.h +++ b/sound/pcmcia/vx/vxpocket.h @@ -23,7 +23,6 @@ #include -#include #include #include -- cgit v1.2.3 From 2e9b981a7c63ee8278df6823f8389d69dad1a499 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sun, 8 Aug 2010 11:36:26 +0200 Subject: pcmcia: move driver name to struct pcmcia_driver Tested-by: Wolfram Sang Signed-off-by: Dominik Brodowski --- drivers/ata/pata_pcmcia.c | 4 +--- drivers/bluetooth/bluecard_cs.c | 4 +--- drivers/bluetooth/bt3c_cs.c | 4 +--- drivers/bluetooth/btuart_cs.c | 4 +--- drivers/bluetooth/dtl1_cs.c | 4 +--- drivers/char/pcmcia/cm4000_cs.c | 4 +--- drivers/char/pcmcia/cm4040_cs.c | 4 +--- drivers/char/pcmcia/ipwireless/main.c | 2 +- drivers/char/pcmcia/synclink_cs.c | 4 +--- drivers/ide/ide-cs.c | 4 +--- drivers/isdn/hardware/avm/avm_cs.c | 4 +--- drivers/isdn/hisax/avma1_cs.c | 4 +--- drivers/isdn/hisax/elsa_cs.c | 4 +--- drivers/isdn/hisax/sedlbauer_cs.c | 4 +--- drivers/isdn/hisax/teles_cs.c | 4 +--- drivers/mmc/host/sdricoh_cs.c | 4 +--- drivers/mtd/maps/pcmciamtd.c | 4 +--- drivers/net/pcmcia/3c574_cs.c | 4 +--- drivers/net/pcmcia/3c589_cs.c | 4 +--- drivers/net/pcmcia/axnet_cs.c | 4 +--- drivers/net/pcmcia/com20020_cs.c | 4 +--- drivers/net/pcmcia/fmvj18x_cs.c | 4 +--- drivers/net/pcmcia/ibmtr_cs.c | 4 +--- drivers/net/pcmcia/nmclan_cs.c | 4 +--- drivers/net/pcmcia/pcnet_cs.c | 4 +--- drivers/net/pcmcia/smc91c92_cs.c | 4 +--- drivers/net/pcmcia/xirc2ps_cs.c | 4 +--- drivers/net/wireless/airo_cs.c | 4 +--- drivers/net/wireless/atmel_cs.c | 4 +--- drivers/net/wireless/b43/pcmcia.c | 4 +--- drivers/net/wireless/hostap/hostap_cs.c | 4 +--- drivers/net/wireless/libertas/if_cs.c | 4 +--- drivers/net/wireless/orinoco/orinoco_cs.c | 4 +--- drivers/net/wireless/orinoco/spectrum_cs.c | 4 +--- drivers/net/wireless/ray_cs.c | 4 +--- drivers/net/wireless/wl3501_cs.c | 4 +--- drivers/parport/parport_cs.c | 4 +--- drivers/pcmcia/ds.c | 21 +++++++++++---------- drivers/scsi/pcmcia/aha152x_stub.c | 4 +--- drivers/scsi/pcmcia/fdomain_stub.c | 4 +--- drivers/scsi/pcmcia/nsp_cs.c | 4 +--- drivers/scsi/pcmcia/qlogic_stub.c | 2 -- drivers/scsi/pcmcia/sym53c500_cs.c | 4 +--- drivers/serial/serial_cs.c | 4 +--- drivers/staging/comedi/drivers/cb_das16_cs.c | 4 +--- drivers/staging/comedi/drivers/das08_cs.c | 4 +--- drivers/staging/comedi/drivers/ni_daq_700.c | 4 +--- drivers/staging/comedi/drivers/ni_daq_dio24.c | 4 +--- drivers/staging/comedi/drivers/ni_labpc_cs.c | 4 +--- drivers/staging/comedi/drivers/ni_mio_cs.c | 4 +--- drivers/staging/comedi/drivers/quatech_daqp_cs.c | 4 +--- drivers/staging/wlags49_h2/wl_cs.c | 4 +--- drivers/telephony/ixj_pcmcia.c | 4 +--- drivers/usb/host/sl811_cs.c | 4 +--- include/pcmcia/ds.h | 2 ++ sound/pcmcia/pdaudiocf/pdaudiocf.c | 4 +--- sound/pcmcia/vx/vxpocket.c | 4 +--- 57 files changed, 67 insertions(+), 172 deletions(-) (limited to 'drivers/mtd/maps/pcmciamtd.c') diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 88cb03c36963..806292160b3f 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -382,9 +382,7 @@ MODULE_DEVICE_TABLE(pcmcia, pcmcia_devices); static struct pcmcia_driver pcmcia_driver = { .owner = THIS_MODULE, - .drv = { - .name = DRV_NAME, - }, + .name = DRV_NAME, .id_table = pcmcia_devices, .probe = pcmcia_init_one, .remove = pcmcia_remove_one, diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c index c9dd5b789d25..4104b7feae67 100644 --- a/drivers/bluetooth/bluecard_cs.c +++ b/drivers/bluetooth/bluecard_cs.c @@ -940,9 +940,7 @@ MODULE_DEVICE_TABLE(pcmcia, bluecard_ids); static struct pcmcia_driver bluecard_driver = { .owner = THIS_MODULE, - .drv = { - .name = "bluecard_cs", - }, + .name = "bluecard_cs", .probe = bluecard_probe, .remove = bluecard_detach, .id_table = bluecard_ids, diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index 8b8be35fe312..0c8a65587491 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -769,9 +769,7 @@ MODULE_DEVICE_TABLE(pcmcia, bt3c_ids); static struct pcmcia_driver bt3c_driver = { .owner = THIS_MODULE, - .drv = { - .name = "bt3c_cs", - }, + .name = "bt3c_cs", .probe = bt3c_probe, .remove = bt3c_detach, .id_table = bt3c_ids, diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index 9f9bb69dc0a2..f8a0708e2311 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -697,9 +697,7 @@ MODULE_DEVICE_TABLE(pcmcia, btuart_ids); static struct pcmcia_driver btuart_driver = { .owner = THIS_MODULE, - .drv = { - .name = "btuart_cs", - }, + .name = "btuart_cs", .probe = btuart_probe, .remove = btuart_detach, .id_table = btuart_ids, diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c index 12cd177132fc..26ee0cf88d20 100644 --- a/drivers/bluetooth/dtl1_cs.c +++ b/drivers/bluetooth/dtl1_cs.c @@ -647,9 +647,7 @@ MODULE_DEVICE_TABLE(pcmcia, dtl1_ids); static struct pcmcia_driver dtl1_driver = { .owner = THIS_MODULE, - .drv = { - .name = "dtl1_cs", - }, + .name = "dtl1_cs", .probe = dtl1_probe, .remove = dtl1_detach, .id_table = dtl1_ids, diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index 79de9ccb8caf..e932526d4561 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -1877,9 +1877,7 @@ MODULE_DEVICE_TABLE(pcmcia, cm4000_ids); static struct pcmcia_driver cm4000_driver = { .owner = THIS_MODULE, - .drv = { - .name = "cm4000_cs", - }, + .name = "cm4000_cs", .probe = cm4000_probe, .remove = cm4000_detach, .suspend = cm4000_suspend, diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c index bf012d228a9e..d7e2bec02485 100644 --- a/drivers/char/pcmcia/cm4040_cs.c +++ b/drivers/char/pcmcia/cm4040_cs.c @@ -643,9 +643,7 @@ MODULE_DEVICE_TABLE(pcmcia, cm4040_ids); static struct pcmcia_driver reader_driver = { .owner = THIS_MODULE, - .drv = { - .name = "cm4040_cs", - }, + .name = "cm4040_cs", .probe = reader_probe, .remove = reader_detach, .id_table = cm4040_ids, diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c index 594c23be69f5..a1b808346691 100644 --- a/drivers/char/pcmcia/ipwireless/main.c +++ b/drivers/char/pcmcia/ipwireless/main.c @@ -295,7 +295,7 @@ static struct pcmcia_driver me = { .owner = THIS_MODULE, .probe = ipwireless_attach, .remove = ipwireless_detach, - .drv = { .name = IPWIRELESS_PCCARD_NAME }, + .name = IPWIRELESS_PCCARD_NAME, .id_table = ipw_ids }; diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 7c71913714ca..493dba51115b 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -2773,9 +2773,7 @@ MODULE_DEVICE_TABLE(pcmcia, mgslpc_ids); static struct pcmcia_driver mgslpc_driver = { .owner = THIS_MODULE, - .drv = { - .name = "synclink_cs", - }, + .name = "synclink_cs", .probe = mgslpc_probe, .remove = mgslpc_detach, .id_table = mgslpc_ids, diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index c389d9a28881..54702cc8e0d4 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -389,9 +389,7 @@ MODULE_DEVICE_TABLE(pcmcia, ide_ids); static struct pcmcia_driver ide_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "ide-cs", - }, + .name = "ide-cs", .probe = ide_probe, .remove = ide_detach, .id_table = ide_ids, diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c index 403a995bec95..b172361bbef8 100644 --- a/drivers/isdn/hardware/avm/avm_cs.c +++ b/drivers/isdn/hardware/avm/avm_cs.c @@ -210,9 +210,7 @@ MODULE_DEVICE_TABLE(pcmcia, avmcs_ids); static struct pcmcia_driver avmcs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "avm_cs", - }, + .name = "avm_cs", .probe = avmcs_probe, .remove = avmcs_detach, .id_table = avmcs_ids, diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c index 47590e0a63dc..314bc86bf92b 100644 --- a/drivers/isdn/hisax/avma1_cs.c +++ b/drivers/isdn/hisax/avma1_cs.c @@ -210,9 +210,7 @@ MODULE_DEVICE_TABLE(pcmcia, avma1cs_ids); static struct pcmcia_driver avma1cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "avma1_cs", - }, + .name = "avma1_cs", .probe = avma1cs_probe, .remove = __devexit_p(avma1cs_detach), .id_table = avma1cs_ids, diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c index b37b9f0f7fdc..2d439a79fd88 100644 --- a/drivers/isdn/hisax/elsa_cs.c +++ b/drivers/isdn/hisax/elsa_cs.c @@ -266,9 +266,7 @@ MODULE_DEVICE_TABLE(pcmcia, elsa_ids); static struct pcmcia_driver elsa_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "elsa_cs", - }, + .name = "elsa_cs", .probe = elsa_cs_probe, .remove = __devexit_p(elsa_cs_detach), .id_table = elsa_ids, diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index ff17dba175c4..9e5c4fd08671 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -284,9 +284,7 @@ MODULE_DEVICE_TABLE(pcmcia, sedlbauer_ids); static struct pcmcia_driver sedlbauer_driver = { .owner = THIS_MODULE, - .drv = { - .name = "sedlbauer_cs", - }, + .name = "sedlbauer_cs", .probe = sedlbauer_probe, .remove = __devexit_p(sedlbauer_detach), .id_table = sedlbauer_ids, diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c index 13ba9abfc9b5..82f09b864846 100644 --- a/drivers/isdn/hisax/teles_cs.c +++ b/drivers/isdn/hisax/teles_cs.c @@ -255,9 +255,7 @@ MODULE_DEVICE_TABLE(pcmcia, teles_ids); static struct pcmcia_driver teles_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "teles_cs", - }, + .name = "teles_cs", .probe = teles_probe, .remove = __devexit_p(teles_detach), .id_table = teles_ids, diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c index 7a7273b09d9a..f472c2714eb8 100644 --- a/drivers/mmc/host/sdricoh_cs.c +++ b/drivers/mmc/host/sdricoh_cs.c @@ -535,9 +535,7 @@ static int sdricoh_pcmcia_resume(struct pcmcia_device *link) #endif static struct pcmcia_driver sdricoh_driver = { - .drv = { - .name = DRIVER_NAME, - }, + .name = DRIVER_NAME, .probe = sdricoh_pcmcia_probe, .remove = sdricoh_pcmcia_detach, .id_table = pcmcia_ids, diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c index 388db9ecf222..214c695a2398 100644 --- a/drivers/mtd/maps/pcmciamtd.c +++ b/drivers/mtd/maps/pcmciamtd.c @@ -750,9 +750,7 @@ static struct pcmcia_device_id pcmciamtd_ids[] = { MODULE_DEVICE_TABLE(pcmcia, pcmciamtd_ids); static struct pcmcia_driver pcmciamtd_driver = { - .drv = { - .name = "pcmciamtd" - }, + .name = "pcmciamtd", .probe = pcmciamtd_probe, .remove = pcmciamtd_detach, .owner = THIS_MODULE, diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index 8abce76367f8..ba52b0b6d93b 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -1196,9 +1196,7 @@ MODULE_DEVICE_TABLE(pcmcia, tc574_ids); static struct pcmcia_driver tc574_driver = { .owner = THIS_MODULE, - .drv = { - .name = "3c574_cs", - }, + .name = "3c574_cs", .probe = tc574_probe, .remove = tc574_detach, .id_table = tc574_ids, diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index 34195c407fb2..551759c25a74 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -953,9 +953,7 @@ MODULE_DEVICE_TABLE(pcmcia, tc589_ids); static struct pcmcia_driver tc589_driver = { .owner = THIS_MODULE, - .drv = { - .name = "3c589_cs", - }, + .name = "3c589_cs", .probe = tc589_probe, .remove = tc589_detach, .id_table = tc589_ids, diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 9d9d997f2e59..fb5a39ba4801 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -761,9 +761,7 @@ MODULE_DEVICE_TABLE(pcmcia, axnet_ids); static struct pcmcia_driver axnet_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "axnet_cs", - }, + .name = "axnet_cs", .probe = axnet_probe, .remove = axnet_detach, .id_table = axnet_ids, diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c index 039731bddc27..a5d918ea5b13 100644 --- a/drivers/net/pcmcia/com20020_cs.c +++ b/drivers/net/pcmcia/com20020_cs.c @@ -364,9 +364,7 @@ MODULE_DEVICE_TABLE(pcmcia, com20020_ids); static struct pcmcia_driver com20020_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "com20020_cs", - }, + .name = "com20020_cs", .probe = com20020_probe, .remove = com20020_detach, .id_table = com20020_ids, diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index 792ab38d979c..1c327598bbe8 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -697,9 +697,7 @@ MODULE_DEVICE_TABLE(pcmcia, fmvj18x_ids); static struct pcmcia_driver fmvj18x_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "fmvj18x_cs", - }, + .name = "fmvj18x_cs", .probe = fmvj18x_probe, .remove = fmvj18x_detach, .id_table = fmvj18x_ids, diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index b298a3d98dc8..d3c9f016f791 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -394,9 +394,7 @@ MODULE_DEVICE_TABLE(pcmcia, ibmtr_ids); static struct pcmcia_driver ibmtr_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "ibmtr_cs", - }, + .name = "ibmtr_cs", .probe = ibmtr_attach, .remove = ibmtr_detach, .id_table = ibmtr_ids, diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index 51bf76de6499..8e5730c42ce6 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -1533,9 +1533,7 @@ MODULE_DEVICE_TABLE(pcmcia, nmclan_ids); static struct pcmcia_driver nmclan_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "nmclan_cs", - }, + .name = "nmclan_cs", .probe = nmclan_probe, .remove = nmclan_detach, .id_table = nmclan_ids, diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index ffe2587b9145..22987e6a685e 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1748,9 +1748,7 @@ MODULE_FIRMWARE("cis/PE-200.cis"); MODULE_FIRMWARE("cis/tamarack.cis"); static struct pcmcia_driver pcnet_driver = { - .drv = { - .name = "pcnet_cs", - }, + .name = "pcnet_cs", .probe = pcnet_probe, .remove = pcnet_detach, .owner = THIS_MODULE, diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index a8cef28507de..e4c4fb626572 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -2090,9 +2090,7 @@ MODULE_DEVICE_TABLE(pcmcia, smc91c92_ids); static struct pcmcia_driver smc91c92_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "smc91c92_cs", - }, + .name = "smc91c92_cs", .probe = smc91c92_probe, .remove = smc91c92_detach, .id_table = smc91c92_ids, diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index cecc07454e9e..18cdc84a84bf 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -1832,9 +1832,7 @@ MODULE_DEVICE_TABLE(pcmcia, xirc2ps_ids); static struct pcmcia_driver xirc2ps_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "xirc2ps_cs", - }, + .name = "xirc2ps_cs", .probe = xirc2ps_probe, .remove = xirc2ps_detach, .id_table = xirc2ps_ids, diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index 4067bf1cdeb4..0fc8f639c1d4 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -246,9 +246,7 @@ MODULE_DEVICE_TABLE(pcmcia, airo_ids); static struct pcmcia_driver airo_driver = { .owner = THIS_MODULE, - .drv = { - .name = "airo_cs", - }, + .name = "airo_cs", .probe = airo_probe, .remove = airo_detach, .id_table = airo_ids, diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index 202938022112..13c0c3b02690 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -309,9 +309,7 @@ MODULE_DEVICE_TABLE(pcmcia, atmel_ids); static struct pcmcia_driver atmel_driver = { .owner = THIS_MODULE, - .drv = { - .name = "atmel_cs", - }, + .name = "atmel_cs", .probe = atmel_probe, .remove = atmel_detach, .id_table = atmel_ids, diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c index 61abab1f1c7c..7dcba5fafdc7 100644 --- a/drivers/net/wireless/b43/pcmcia.c +++ b/drivers/net/wireless/b43/pcmcia.c @@ -121,9 +121,7 @@ static void __devexit b43_pcmcia_remove(struct pcmcia_device *dev) static struct pcmcia_driver b43_pcmcia_driver = { .owner = THIS_MODULE, - .drv = { - .name = "b43-pcmcia", - }, + .name = "b43-pcmcia", .id_table = b43_pcmcia_tbl, .probe = b43_pcmcia_probe, .remove = __devexit_p(b43_pcmcia_remove), diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index d6ff0c7b7d94..ba645701179a 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -707,9 +707,7 @@ MODULE_DEVICE_TABLE(pcmcia, hostap_cs_ids); static struct pcmcia_driver hostap_driver = { - .drv = { - .name = "hostap_cs", - }, + .name = "hostap_cs", .probe = hostap_cs_probe, .remove = prism2_detach, .owner = THIS_MODULE, diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index 2c6f28ac5197..c2bd2f0304bb 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -988,9 +988,7 @@ MODULE_DEVICE_TABLE(pcmcia, if_cs_ids); static struct pcmcia_driver lbs_driver = { .owner = THIS_MODULE, - .drv = { - .name = DRV_NAME, - }, + .name = DRV_NAME, .probe = if_cs_probe, .remove = if_cs_detach, .id_table = if_cs_ids, diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index 263dfe9e0e30..28212661f34a 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -378,9 +378,7 @@ MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids); static struct pcmcia_driver orinoco_driver = { .owner = THIS_MODULE, - .drv = { - .name = DRIVER_NAME, - }, + .name = DRIVER_NAME, .probe = orinoco_cs_probe, .remove = orinoco_cs_detach, .id_table = orinoco_cs_ids, diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index 78446507873f..5906e9af9064 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -361,9 +361,7 @@ MODULE_DEVICE_TABLE(pcmcia, spectrum_cs_ids); static struct pcmcia_driver orinoco_driver = { .owner = THIS_MODULE, - .drv = { - .name = DRIVER_NAME, - }, + .name = DRIVER_NAME, .probe = spectrum_cs_probe, .remove = spectrum_cs_detach, .suspend = spectrum_cs_suspend, diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index 1457f34efa9a..b5a2c9e31de2 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -2843,9 +2843,7 @@ MODULE_DEVICE_TABLE(pcmcia, ray_ids); static struct pcmcia_driver ray_driver = { .owner = THIS_MODULE, - .drv = { - .name = "ray_cs", - }, + .name = "ray_cs", .probe = ray_probe, .remove = ray_detach, .id_table = ray_ids, diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index 101b6ffd560e..d3ed38f558fa 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -2054,9 +2054,7 @@ MODULE_DEVICE_TABLE(pcmcia, wl3501_ids); static struct pcmcia_driver wl3501_driver = { .owner = THIS_MODULE, - .drv = { - .name = "wl3501_cs", - }, + .name = "wl3501_cs", .probe = wl3501_probe, .remove = wl3501_detach, .id_table = wl3501_ids, diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c index 3730184a04a3..6f4c9560b2b9 100644 --- a/drivers/parport/parport_cs.c +++ b/drivers/parport/parport_cs.c @@ -221,9 +221,7 @@ MODULE_DEVICE_TABLE(pcmcia, parport_ids); static struct pcmcia_driver parport_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "parport_cs", - }, + .name = "parport_cs", .probe = parport_probe, .remove = parport_detach, .id_table = parport_ids, diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 912c74082891..100c4412457d 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -51,7 +51,7 @@ static void pcmcia_check_driver(struct pcmcia_driver *p_drv) if (!p_drv->probe || !p_drv->remove) printk(KERN_DEBUG "pcmcia: %s lacks a requisite callback " - "function\n", p_drv->drv.name); + "function\n", p_drv->name); while (did && did->match_flags) { for (i = 0; i < 4; i++) { @@ -64,7 +64,7 @@ static void pcmcia_check_driver(struct pcmcia_driver *p_drv) printk(KERN_DEBUG "pcmcia: %s: invalid hash for " "product string \"%s\": is 0x%x, should " - "be 0x%x\n", p_drv->drv.name, did->prod_id[i], + "be 0x%x\n", p_drv->name, did->prod_id[i], did->prod_id_hash[i], hash); printk(KERN_DEBUG "pcmcia: see " "Documentation/pcmcia/devicetable.txt for " @@ -179,10 +179,11 @@ int pcmcia_register_driver(struct pcmcia_driver *driver) /* initialize common fields */ driver->drv.bus = &pcmcia_bus_type; driver->drv.owner = driver->owner; + driver->drv.name = driver->name; mutex_init(&driver->dynids.lock); INIT_LIST_HEAD(&driver->dynids.list); - pr_debug("registering driver %s\n", driver->drv.name); + pr_debug("registering driver %s\n", driver->name); error = driver_register(&driver->drv); if (error < 0) @@ -202,7 +203,7 @@ EXPORT_SYMBOL(pcmcia_register_driver); */ void pcmcia_unregister_driver(struct pcmcia_driver *driver) { - pr_debug("unregistering driver %s\n", driver->drv.name); + pr_debug("unregistering driver %s\n", driver->name); driver_unregister(&driver->drv); pcmcia_free_dynids(driver); } @@ -263,7 +264,7 @@ static int pcmcia_device_probe(struct device *dev) p_drv = to_pcmcia_drv(dev->driver); s = p_dev->socket; - dev_dbg(dev, "trying to bind to %s\n", p_drv->drv.name); + dev_dbg(dev, "trying to bind to %s\n", p_drv->name); if ((!p_drv->probe) || (!p_dev->function_config) || (!try_module_get(p_drv->owner))) { @@ -289,10 +290,10 @@ static int pcmcia_device_probe(struct device *dev) ret = p_drv->probe(p_dev); if (ret) { dev_dbg(dev, "binding to %s failed with %d\n", - p_drv->drv.name, ret); + p_drv->name, ret); goto put_module; } - dev_dbg(dev, "%s bound: Vpp %d.%d, idx %x, IRQ %d", p_drv->drv.name, + dev_dbg(dev, "%s bound: Vpp %d.%d, idx %x, IRQ %d", p_drv->name, p_dev->vpp/10, p_dev->vpp%10, p_dev->config_index, p_dev->irq); dev_dbg(dev, "resources: ioport %pR %pR iomem %pR %pR %pR", p_dev->resource[0], p_dev->resource[1], p_dev->resource[2], @@ -380,13 +381,13 @@ static int pcmcia_device_remove(struct device *dev) if (p_dev->_irq || p_dev->_io || p_dev->_locked) dev_printk(KERN_INFO, dev, "pcmcia: driver %s did not release config properly\n", - p_drv->drv.name); + p_drv->name); for (i = 0; i < MAX_WIN; i++) if (p_dev->_win & CLIENT_WIN_REQ(i)) dev_printk(KERN_INFO, dev, "pcmcia: driver %s did not release window properly\n", - p_drv->drv.name); + p_drv->name); /* references from pcmcia_probe_device */ pcmcia_put_dev(p_dev); @@ -1142,7 +1143,7 @@ static int pcmcia_dev_suspend(struct device *dev, pm_message_t state) dev_printk(KERN_ERR, dev, "pcmcia: device %s (driver %s) did " "not want to go to sleep (%d)\n", - p_dev->devname, p_drv->drv.name, ret); + p_dev->devname, p_drv->name, ret); mutex_lock(&p_dev->socket->ops_mutex); p_dev->suspended = 0; mutex_unlock(&p_dev->socket->ops_mutex); diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c index bd9ce09b7ff8..49cbea33c141 100644 --- a/drivers/scsi/pcmcia/aha152x_stub.c +++ b/drivers/scsi/pcmcia/aha152x_stub.c @@ -216,9 +216,7 @@ MODULE_DEVICE_TABLE(pcmcia, aha152x_ids); static struct pcmcia_driver aha152x_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "aha152x_cs", - }, + .name = "aha152x_cs", .probe = aha152x_probe, .remove = aha152x_detach, .id_table = aha152x_ids, diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c index f2dc627e9da2..cd69c2670f81 100644 --- a/drivers/scsi/pcmcia/fdomain_stub.c +++ b/drivers/scsi/pcmcia/fdomain_stub.c @@ -188,9 +188,7 @@ MODULE_DEVICE_TABLE(pcmcia, fdomain_ids); static struct pcmcia_driver fdomain_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "fdomain_cs", - }, + .name = "fdomain_cs", .probe = fdomain_probe, .remove = fdomain_detach, .id_table = fdomain_ids, diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index 2b4a1a82d529..0f604d613656 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -1790,9 +1790,7 @@ MODULE_DEVICE_TABLE(pcmcia, nsp_cs_ids); static struct pcmcia_driver nsp_driver = { .owner = THIS_MODULE, - .drv = { - .name = "nsp_cs", - }, + .name = "nsp_cs", .probe = nsp_cs_probe, .remove = nsp_cs_detach, .id_table = nsp_cs_ids, diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c index e8a06e3a384c..9c96ca889ec9 100644 --- a/drivers/scsi/pcmcia/qlogic_stub.c +++ b/drivers/scsi/pcmcia/qlogic_stub.c @@ -294,9 +294,7 @@ MODULE_DEVICE_TABLE(pcmcia, qlogic_ids); static struct pcmcia_driver qlogic_cs_driver = { .owner = THIS_MODULE, - .drv = { .name = "qlogic_cs", - }, .probe = qlogic_probe, .remove = qlogic_detach, .id_table = qlogic_ids, diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c index 6ceb57c355fa..0ae27cb5cd6f 100644 --- a/drivers/scsi/pcmcia/sym53c500_cs.c +++ b/drivers/scsi/pcmcia/sym53c500_cs.c @@ -873,9 +873,7 @@ MODULE_DEVICE_TABLE(pcmcia, sym53c500_ids); static struct pcmcia_driver sym53c500_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "sym53c500_cs", - }, + .name = "sym53c500_cs", .probe = SYM53C500_probe, .remove = SYM53C500_detach, .id_table = sym53c500_ids, diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 422520342936..5047224d2625 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -882,9 +882,7 @@ MODULE_FIRMWARE("cis/RS-COM-2P.cis"); static struct pcmcia_driver serial_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "serial_cs", - }, + .name = "serial_cs", .probe = serial_probe, .remove = serial_detach, .id_table = serial_ids, diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c index 0c4b27c13eb7..a885cd7cfd7f 100644 --- a/drivers/staging/comedi/drivers/cb_das16_cs.c +++ b/drivers/staging/comedi/drivers/cb_das16_cs.c @@ -795,9 +795,7 @@ struct pcmcia_driver das16cs_driver = { .resume = das16cs_pcmcia_resume, .id_table = das16cs_id_table, .owner = THIS_MODULE, - .drv = { - .name = "cb_das16_cs", - }, + .name = "cb_das16_cs", }; static int __init init_das16cs_pcmcia_cs(void) diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c index 6d893253de45..def167eac1d8 100644 --- a/drivers/staging/comedi/drivers/das08_cs.c +++ b/drivers/staging/comedi/drivers/das08_cs.c @@ -305,9 +305,7 @@ struct pcmcia_driver das08_cs_driver = { .resume = das08_pcmcia_resume, .id_table = das08_cs_id_table, .owner = THIS_MODULE, - .drv = { - .name = "pcm-das08", - }, + .name = "pcm-das08", }; static int __init init_das08_pcmcia_cs(void) diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c index 52441255e2bd..9cc8401765bd 100644 --- a/drivers/staging/comedi/drivers/ni_daq_700.c +++ b/drivers/staging/comedi/drivers/ni_daq_700.c @@ -634,9 +634,7 @@ struct pcmcia_driver dio700_cs_driver = { .resume = dio700_cs_resume, .id_table = dio700_cs_ids, .owner = THIS_MODULE, - .drv = { - .name = "ni_daq_700", - }, + .name = "ni_daq_700", }; static int __init init_dio700_cs(void) diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c index 54dda4a45039..b3f7c66e25c2 100644 --- a/drivers/staging/comedi/drivers/ni_daq_dio24.c +++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c @@ -384,9 +384,7 @@ struct pcmcia_driver dio24_cs_driver = { .resume = dio24_cs_resume, .id_table = dio24_cs_ids, .owner = THIS_MODULE, - .drv = { - .name = "ni_daq_dio24", - }, + .name = "ni_daq_dio24", }; static int __init init_dio24_cs(void) diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c index 22119f2a292e..6b7c5d043b0a 100644 --- a/drivers/staging/comedi/drivers/ni_labpc_cs.c +++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c @@ -360,9 +360,7 @@ struct pcmcia_driver labpc_cs_driver = { .resume = labpc_cs_resume, .id_table = labpc_cs_ids, .owner = THIS_MODULE, - .drv = { - .name = "daqcard-1200", - }, + .name = "daqcard-1200", }; static int __init init_labpc_cs(void) diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c index f1e31d3e12bc..49563273f605 100644 --- a/drivers/staging/comedi/drivers/ni_mio_cs.c +++ b/drivers/staging/comedi/drivers/ni_mio_cs.c @@ -437,9 +437,7 @@ struct pcmcia_driver ni_mio_cs_driver = { .resume = &mio_cs_resume, .id_table = ni_mio_cs_ids, .owner = THIS_MODULE, - .drv = { - .name = "ni_mio_cs", - }, + .name = "ni_mio_cs", }; int init_module(void) diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c index de37ff70a9e7..32fecf57868d 100644 --- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c +++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c @@ -1168,9 +1168,7 @@ static struct pcmcia_driver daqp_cs_driver = { .resume = daqp_cs_resume, .id_table = daqp_cs_id_table, .owner = THIS_MODULE, - .drv = { - .name = "quatech_daqp_cs", - }, + .name = "quatech_daqp_cs", }; int __init init_module(void) diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c index 62a70afa3e29..aa3cc516fe18 100644 --- a/drivers/staging/wlags49_h2/wl_cs.c +++ b/drivers/staging/wlags49_h2/wl_cs.c @@ -455,9 +455,7 @@ MODULE_DEVICE_TABLE(pcmcia, wl_adapter_ids); static struct pcmcia_driver wlags49_driver = { .owner = THIS_MODULE, - .drv = { - .name = DRIVER_NAME, - }, + .name = DRIVER_NAME, .probe = wl_adapter_attach, .remove = wl_adapter_detach, .id_table = wl_adapter_ids, diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c index 76edd39525de..d005b9eeebbc 100644 --- a/drivers/telephony/ixj_pcmcia.c +++ b/drivers/telephony/ixj_pcmcia.c @@ -165,9 +165,7 @@ MODULE_DEVICE_TABLE(pcmcia, ixj_ids); static struct pcmcia_driver ixj_driver = { .owner = THIS_MODULE, - .drv = { - .name = "ixj_cs", - }, + .name = "ixj_cs", .probe = ixj_probe, .remove = ixj_detach, .id_table = ixj_ids, diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index 9ce95cdfc9ef..3775c035a6c5 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -195,9 +195,7 @@ MODULE_DEVICE_TABLE(pcmcia, sl811_ids); static struct pcmcia_driver sl811_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "sl811_cs", - }, + .name = "sl811_cs", .probe = sl811_cs_probe, .remove = sl811_cs_detach, .id_table = sl811_ids, diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h index 0b8c8d45df47..d830c87ff0a7 100644 --- a/include/pcmcia/ds.h +++ b/include/pcmcia/ds.h @@ -47,6 +47,8 @@ struct pcmcia_dynids { }; struct pcmcia_driver { + const char *name; + int (*probe) (struct pcmcia_device *dev); void (*remove) (struct pcmcia_device *dev); diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c index 2476d5f0a14f..8cc4733698a0 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf.c +++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c @@ -287,9 +287,7 @@ MODULE_DEVICE_TABLE(pcmcia, snd_pdacf_ids); static struct pcmcia_driver pdacf_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "snd-pdaudiocf", - }, + .name = "snd-pdaudiocf", .probe = snd_pdacf_probe, .remove = snd_pdacf_detach, .id_table = snd_pdacf_ids, diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c index 017a8d6c510d..80000d631f88 100644 --- a/sound/pcmcia/vx/vxpocket.c +++ b/sound/pcmcia/vx/vxpocket.c @@ -358,9 +358,7 @@ MODULE_DEVICE_TABLE(pcmcia, vxp_ids); static struct pcmcia_driver vxp_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "snd-vxpocket", - }, + .name = "snd-vxpocket", .probe = vxpocket_probe, .remove = vxpocket_detach, .id_table = vxp_ids, -- cgit v1.2.3 From 06b3a1d12f41b592972643f8b84015d6c03dc576 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sun, 8 Aug 2010 12:27:40 +0200 Subject: pcmcia: avoid messages on module (un)loading printk() statements on module load or unload are frowned upon. Also, add a few __init or __exit declarations. Tested-by: Wolfram Sang Signed-off-by: Dominik Brodowski --- drivers/char/pcmcia/cm4000_cs.c | 5 ----- drivers/char/pcmcia/cm4040_cs.c | 5 ----- drivers/char/pcmcia/ipwireless/main.c | 6 ------ drivers/char/pcmcia/synclink_cs.c | 4 ---- drivers/isdn/hisax/avma1_cs.c | 2 +- drivers/mtd/maps/pcmciamtd.c | 2 -- drivers/net/wireless/airo_cs.c | 4 ++-- drivers/net/wireless/atmel_cs.c | 4 ++-- drivers/net/wireless/orinoco/orinoco_cs.c | 8 -------- drivers/net/wireless/orinoco/spectrum_cs.c | 8 -------- drivers/scsi/pcmcia/aha152x_stub.c | 3 --- drivers/scsi/pcmcia/nsp_cs.c | 3 --- 12 files changed, 5 insertions(+), 49 deletions(-) (limited to 'drivers/mtd/maps/pcmciamtd.c') diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index e932526d4561..c7b482d15e2a 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -54,8 +54,6 @@ __func__ , ## args); \ } while (0) -static char *version = "cm4000_cs.c v2.4.0gm6 - All bugs added by Harald Welte"; - #define T_1SEC (HZ) #define T_10MSEC msecs_to_jiffies(10) #define T_20MSEC msecs_to_jiffies(20) @@ -1889,8 +1887,6 @@ static int __init cmm_init(void) { int rc; - printk(KERN_INFO "%s\n", version); - cmm_class = class_create(THIS_MODULE, "cardman_4000"); if (IS_ERR(cmm_class)) return PTR_ERR(cmm_class); @@ -1915,7 +1911,6 @@ static int __init cmm_init(void) static void __exit cmm_exit(void) { - printk(KERN_INFO MODULE_NAME ": unloading\n"); pcmcia_unregister_driver(&cm4000_driver); unregister_chrdev(major, DEVICE_NAME); class_destroy(cmm_class); diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c index d7e2bec02485..bf2f046fc2c1 100644 --- a/drivers/char/pcmcia/cm4040_cs.c +++ b/drivers/char/pcmcia/cm4040_cs.c @@ -48,9 +48,6 @@ __func__ , ## args); \ } while (0) -static char *version = -"OMNIKEY CardMan 4040 v1.1.0gm5 - All bugs added by Harald Welte"; - #define CCID_DRIVER_BULK_DEFAULT_TIMEOUT (150*HZ) #define CCID_DRIVER_ASYNC_POWERUP_TIMEOUT (35*HZ) #define CCID_DRIVER_MINIMUM_TIMEOUT (3*HZ) @@ -653,7 +650,6 @@ static int __init cm4040_init(void) { int rc; - printk(KERN_INFO "%s\n", version); cmx_class = class_create(THIS_MODULE, "cardman_4040"); if (IS_ERR(cmx_class)) return PTR_ERR(cmx_class); @@ -678,7 +674,6 @@ static int __init cm4040_init(void) static void __exit cm4040_exit(void) { - printk(KERN_INFO MODULE_NAME ": unloading\n"); pcmcia_unregister_driver(&reader_driver); unregister_chrdev(major, DEVICE_NAME); class_destroy(cmx_class); diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c index a1b808346691..94b8eb4d691d 100644 --- a/drivers/char/pcmcia/ipwireless/main.c +++ b/drivers/char/pcmcia/ipwireless/main.c @@ -307,9 +307,6 @@ static int __init init_ipwireless(void) { int ret; - printk(KERN_INFO IPWIRELESS_PCCARD_NAME " " - IPWIRELESS_PCMCIA_VERSION " by " IPWIRELESS_PCMCIA_AUTHOR "\n"); - ret = ipwireless_tty_init(); if (ret != 0) return ret; @@ -326,9 +323,6 @@ static int __init init_ipwireless(void) */ static void __exit exit_ipwireless(void) { - printk(KERN_INFO IPWIRELESS_PCCARD_NAME " " - IPWIRELESS_PCMCIA_VERSION " removed\n"); - pcmcia_unregister_driver(&me); ipwireless_tty_release(); } diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 493dba51115b..d97a53cccdc5 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -2809,8 +2809,6 @@ static void synclink_cs_cleanup(void) { int rc; - printk("Unloading %s: version %s\n", driver_name, driver_version); - while(mgslpc_device_list) mgslpc_remove_device(mgslpc_device_list); @@ -2833,8 +2831,6 @@ static int __init synclink_cs_init(void) BREAKPOINT(); } - printk("%s %s\n", driver_name, driver_version); - if ((rc = pcmcia_register_driver(&mgslpc_driver)) < 0) return rc; diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c index 314bc86bf92b..62616c871c78 100644 --- a/drivers/isdn/hisax/avma1_cs.c +++ b/drivers/isdn/hisax/avma1_cs.c @@ -220,7 +220,7 @@ static struct pcmcia_driver avma1cs_driver = { static int __init init_avma1_cs(void) { - return(pcmcia_register_driver(&avma1cs_driver)); + return pcmcia_register_driver(&avma1cs_driver); } static void __exit exit_avma1_cs(void) diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c index 214c695a2398..5df89e742a33 100644 --- a/drivers/mtd/maps/pcmciamtd.c +++ b/drivers/mtd/maps/pcmciamtd.c @@ -762,8 +762,6 @@ static struct pcmcia_driver pcmciamtd_driver = { static int __init init_pcmciamtd(void) { - info(DRIVER_DESC); - if(bankwidth && bankwidth != 1 && bankwidth != 2) { info("bad bankwidth (%d), using default", bankwidth); bankwidth = 2; diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index 0fc8f639c1d4..b084278f36b7 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -254,12 +254,12 @@ static struct pcmcia_driver airo_driver = { .resume = airo_resume, }; -static int airo_cs_init(void) +static int __init airo_cs_init(void) { return pcmcia_register_driver(&airo_driver); } -static void airo_cs_cleanup(void) +static void __exit airo_cs_cleanup(void) { pcmcia_unregister_driver(&airo_driver); } diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index 13c0c3b02690..fabe91a8db2b 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -317,12 +317,12 @@ static struct pcmcia_driver atmel_driver = { .resume = atmel_resume, }; -static int atmel_cs_init(void) +static int __init atmel_cs_init(void) { return pcmcia_register_driver(&atmel_driver); } -static void atmel_cs_cleanup(void) +static void __exit atmel_cs_cleanup(void) { pcmcia_unregister_driver(&atmel_driver); } diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index 28212661f34a..2b1f554af0b2 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -281,12 +281,6 @@ static int orinoco_cs_resume(struct pcmcia_device *link) /* Module initialization */ /********************************************************************/ -/* Can't be declared "const" or the whole __initdata section will - * become const */ -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (David Gibson , " - "Pavel Roskin , et al)"; - static struct pcmcia_device_id orinoco_cs_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */ PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */ @@ -389,8 +383,6 @@ static struct pcmcia_driver orinoco_driver = { static int __init init_orinoco_cs(void) { - printk(KERN_DEBUG "%s\n", version); - return pcmcia_register_driver(&orinoco_driver); } diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index 5906e9af9064..1314cf204f12 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -345,12 +345,6 @@ spectrum_cs_resume(struct pcmcia_device *link) /* Module initialization */ /********************************************************************/ -/* Can't be declared "const" or the whole __initdata section will - * become const */ -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (Pavel Roskin ," - " David Gibson , et al)"; - static struct pcmcia_device_id spectrum_cs_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x026c, 0x0001), /* Symbol Spectrum24 LA4137 */ PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0001), /* Socket Communications CF */ @@ -372,8 +366,6 @@ static struct pcmcia_driver orinoco_driver = { static int __init init_spectrum_cs(void) { - printk(KERN_DEBUG "%s\n", version); - return pcmcia_register_driver(&orinoco_driver); } diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c index 49cbea33c141..e77dd02eccdd 100644 --- a/drivers/scsi/pcmcia/aha152x_stub.c +++ b/drivers/scsi/pcmcia/aha152x_stub.c @@ -85,8 +85,6 @@ static void aha152x_release_cs(struct pcmcia_device *link); static void aha152x_detach(struct pcmcia_device *p_dev); static int aha152x_config_cs(struct pcmcia_device *link); -static struct pcmcia_device *dev_list; - static int aha152x_probe(struct pcmcia_device *link) { scsi_info_t *info; @@ -231,7 +229,6 @@ static int __init init_aha152x_cs(void) static void __exit exit_aha152x_cs(void) { pcmcia_unregister_driver(&aha152x_cs_driver); - BUG_ON(dev_list != NULL); } module_init(init_aha152x_cs); diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index 0f604d613656..07b73ca2a7e0 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -1800,14 +1800,11 @@ static struct pcmcia_driver nsp_driver = { static int __init nsp_cs_init(void) { - nsp_msg(KERN_INFO, "loading..."); - return pcmcia_register_driver(&nsp_driver); } static void __exit nsp_cs_exit(void) { - nsp_msg(KERN_INFO, "unloading..."); pcmcia_unregister_driver(&nsp_driver); } -- cgit v1.2.3 From 2262054e74b4b26ed56a8535c1259f6c6c2862a4 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sun, 15 Aug 2010 08:38:38 +0200 Subject: pcmcia: remove obsolete and wrong comments What's worse than no comment? A wrong comment. Several PCMCIA device drivers contained the same comments, which were based on how the PCMCIA subsystem worked in the old days of 2.4., and which were originally part of a "dummy_cs" driver. These comments no longer matched at all what is happening now, and therefore should be removed. Tested-by: Wolfram Sang Signed-off-by: Dominik Brodowski --- drivers/ide/ide-cs.c | 45 ------------- drivers/isdn/hardware/avm/avm_cs.c | 51 -------------- drivers/isdn/hisax/avma1_cs.c | 57 ---------------- drivers/isdn/hisax/elsa_cs.c | 55 ---------------- drivers/isdn/hisax/sedlbauer_cs.c | 84 ------------------------ drivers/isdn/hisax/teles_cs.c | 62 ----------------- drivers/mtd/maps/pcmciamtd.c | 21 ------ drivers/net/pcmcia/3c574_cs.c | 23 +------ drivers/net/pcmcia/3c589_cs.c | 35 +--------- drivers/net/pcmcia/axnet_cs.c | 33 ---------- drivers/net/pcmcia/com20020_cs.c | 33 ---------- drivers/net/pcmcia/ibmtr_cs.c | 33 ---------- drivers/net/pcmcia/nmclan_cs.c | 28 -------- drivers/net/pcmcia/pcnet_cs.c | 42 ------------ drivers/net/pcmcia/smc91c92_cs.c | 33 ---------- drivers/net/pcmcia/xirc2ps_cs.c | 53 --------------- drivers/net/wireless/airo_cs.c | 71 -------------------- drivers/net/wireless/atmel_cs.c | 69 ------------------- drivers/net/wireless/hostap/hostap_cs.c | 8 --- drivers/net/wireless/libertas/if_cs.c | 30 --------- drivers/net/wireless/orinoco/orinoco_cs.c | 44 ------------- drivers/net/wireless/orinoco/spectrum_cs.c | 44 ------------- drivers/net/wireless/ray_cs.c | 35 +--------- drivers/net/wireless/wl3501_cs.c | 35 ---------- drivers/parport/parport_cs.c | 33 ---------- drivers/scsi/pcmcia/nsp_cs.c | 26 -------- drivers/serial/serial_cs.c | 32 --------- drivers/staging/comedi/drivers/cb_das16_cs.c | 5 -- drivers/staging/comedi/drivers/das08_cs.c | 68 ------------------- drivers/staging/comedi/drivers/ni_daq_700.c | 61 ----------------- drivers/staging/comedi/drivers/ni_daq_dio24.c | 61 ----------------- drivers/staging/comedi/drivers/ni_labpc_cs.c | 75 --------------------- drivers/staging/comedi/drivers/quatech_daqp_cs.c | 64 ------------------ drivers/staging/wlags49_h2/wl_cs.c | 61 ----------------- drivers/staging/wlags49_h2/wl_main.c | 19 ------ 35 files changed, 3 insertions(+), 1526 deletions(-) (limited to 'drivers/mtd/maps/pcmciamtd.c') diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index 54702cc8e0d4..404843e8611b 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -71,17 +71,6 @@ static int ide_config(struct pcmcia_device *); static void ide_detach(struct pcmcia_device *p_dev); - - - -/*====================================================================== - - ide_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int ide_probe(struct pcmcia_device *link) { ide_info_t *info; @@ -102,15 +91,6 @@ static int ide_probe(struct pcmcia_device *link) return ide_config(link); } /* ide_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void ide_detach(struct pcmcia_device *link) { ide_info_t *info = link->priv; @@ -184,14 +164,6 @@ out_release: return NULL; } -/*====================================================================== - - ide_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ide device available to the system. - -======================================================================*/ - static int pcmcia_check_one_config(struct pcmcia_device *pdev, void *priv_data) { int *is_kme = priv_data; @@ -275,14 +247,6 @@ failed: return -ENODEV; } /* ide_config */ -/*====================================================================== - - After a card is removed, ide_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void ide_release(struct pcmcia_device *link) { ide_info_t *info = link->priv; @@ -308,15 +272,6 @@ static void ide_release(struct pcmcia_device *link) } /* ide_release */ -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. A CARD_REMOVAL event - also sets some flags to discourage the ide drivers from - talking to the ports. - -======================================================================*/ - static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_FUNC_ID(4), PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000), /* Corsair */ diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c index b172361bbef8..91f06a3ef002 100644 --- a/drivers/isdn/hardware/avm/avm_cs.c +++ b/drivers/isdn/hardware/avm/avm_cs.c @@ -38,38 +38,10 @@ MODULE_LICENSE("GPL"); /*====================================================================*/ -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card insertion - and ejection events. They are invoked from the skeleton event - handler. -*/ - static int avmcs_config(struct pcmcia_device *link); static void avmcs_release(struct pcmcia_device *link); - -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void avmcs_detach(struct pcmcia_device *p_dev); -/*====================================================================== - - avmcs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int avmcs_probe(struct pcmcia_device *p_dev) { /* General socket configuration */ @@ -80,28 +52,12 @@ static int avmcs_probe(struct pcmcia_device *p_dev) return avmcs_config(p_dev); } /* avmcs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ static void avmcs_detach(struct pcmcia_device *link) { avmcs_release(link); } /* avmcs_detach */ -/*====================================================================== - - avmcs_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - static int avmcs_configcheck(struct pcmcia_device *p_dev, void *priv_data) { p_dev->resource[0]->end = 16; @@ -185,13 +141,6 @@ static int avmcs_config(struct pcmcia_device *link) } /* avmcs_config */ -/*====================================================================== - - After a card is removed, avmcs_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ static void avmcs_release(struct pcmcia_device *link) { diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c index 62616c871c78..ac4dd7857cbd 100644 --- a/drivers/isdn/hisax/avma1_cs.c +++ b/drivers/isdn/hisax/avma1_cs.c @@ -39,39 +39,10 @@ module_param(isdnprot, int, 0); /*====================================================================*/ -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card insertion - and ejection events. They are invoked from the skeleton event - handler. -*/ - static int avma1cs_config(struct pcmcia_device *link) __devinit ; static void avma1cs_release(struct pcmcia_device *link); - -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void avma1cs_detach(struct pcmcia_device *p_dev) __devexit ; - -/*====================================================================== - - avma1cs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int __devinit avma1cs_probe(struct pcmcia_device *p_dev) { dev_dbg(&p_dev->dev, "avma1cs_attach()\n"); @@ -84,15 +55,6 @@ static int __devinit avma1cs_probe(struct pcmcia_device *p_dev) return avma1cs_config(p_dev); } /* avma1cs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void __devexit avma1cs_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "avma1cs_detach(0x%p)\n", link); @@ -100,14 +62,6 @@ static void __devexit avma1cs_detach(struct pcmcia_device *link) kfree(link->priv); } /* avma1cs_detach */ -/*====================================================================== - - avma1cs_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - static int avma1cs_configcheck(struct pcmcia_device *p_dev, void *priv_data) { p_dev->resource[0]->end = 16; @@ -180,14 +134,6 @@ static int __devinit avma1cs_config(struct pcmcia_device *link) return 0; } /* avma1cs_config */ -/*====================================================================== - - After a card is removed, avma1cs_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void avma1cs_release(struct pcmcia_device *link) { unsigned long minor = (unsigned long) link->priv; @@ -200,7 +146,6 @@ static void avma1cs_release(struct pcmcia_device *link) pcmcia_disable_device(link); } /* avma1cs_release */ - static struct pcmcia_device_id avma1cs_ids[] = { PCMCIA_DEVICE_PROD_ID12("AVM", "ISDN A", 0x95d42008, 0xadc9d4bb), PCMCIA_DEVICE_PROD_ID12("ISDN", "CARD", 0x8d9761c8, 0x01c5aa7b), @@ -216,8 +161,6 @@ static struct pcmcia_driver avma1cs_driver = { .id_table = avma1cs_ids, }; -/*====================================================================*/ - static int __init init_avma1_cs(void) { return pcmcia_register_driver(&avma1cs_driver); diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c index 2d439a79fd88..496d477af0f8 100644 --- a/drivers/isdn/hisax/elsa_cs.c +++ b/drivers/isdn/hisax/elsa_cs.c @@ -63,26 +63,8 @@ MODULE_LICENSE("Dual MPL/GPL"); static int protocol = 2; /* EURO-ISDN Default */ module_param(protocol, int, 0); -/*====================================================================*/ - -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card insertion - and ejection events. They are invoked from the elsa_cs event - handler. -*/ - static int elsa_cs_config(struct pcmcia_device *link) __devinit ; static void elsa_cs_release(struct pcmcia_device *link); - -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void elsa_cs_detach(struct pcmcia_device *p_dev) __devexit; typedef struct local_info_t { @@ -91,18 +73,6 @@ typedef struct local_info_t { int cardnr; } local_info_t; -/*====================================================================== - - elsa_cs_attach() creates an "instance" of the driver, allocatingx - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int __devinit elsa_cs_probe(struct pcmcia_device *link) { local_info_t *local; @@ -121,15 +91,6 @@ static int __devinit elsa_cs_probe(struct pcmcia_device *link) return elsa_cs_config(link); } /* elsa_cs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void __devexit elsa_cs_detach(struct pcmcia_device *link) { local_info_t *info = link->priv; @@ -142,14 +103,6 @@ static void __devexit elsa_cs_detach(struct pcmcia_device *link) kfree(info); } /* elsa_cs_detach */ -/*====================================================================== - - elsa_cs_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - static int elsa_cs_configcheck(struct pcmcia_device *p_dev, void *priv_data) { int j; @@ -215,14 +168,6 @@ failed: return -ENODEV; } /* elsa_cs_config */ -/*====================================================================== - - After a card is removed, elsa_cs_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void elsa_cs_release(struct pcmcia_device *link) { local_info_t *local = link->priv; diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index 9e5c4fd08671..360204bc2777 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -63,26 +63,9 @@ MODULE_LICENSE("Dual MPL/GPL"); static int protocol = 2; /* EURO-ISDN Default */ module_param(protocol, int, 0); -/*====================================================================*/ - -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card - insertion and ejection events. They are invoked from the sedlbauer - event handler. -*/ - static int sedlbauer_config(struct pcmcia_device *link) __devinit ; static void sedlbauer_release(struct pcmcia_device *link); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void sedlbauer_detach(struct pcmcia_device *p_dev) __devexit; typedef struct local_info_t { @@ -91,18 +74,6 @@ typedef struct local_info_t { int cardnr; } local_info_t; -/*====================================================================== - - sedlbauer_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int __devinit sedlbauer_probe(struct pcmcia_device *link) { local_info_t *local; @@ -117,30 +88,9 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link) local->p_dev = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - - /* from old sedl_cs - */ - /* The io structure describes IO port mapping */ - return sedlbauer_config(link); } /* sedlbauer_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void __devexit sedlbauer_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "sedlbauer_detach(0x%p)\n", link); @@ -152,13 +102,6 @@ static void __devexit sedlbauer_detach(struct pcmcia_device *link) kfree(link->priv); } /* sedlbauer_detach */ -/*====================================================================== - - sedlbauer_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ static int sedlbauer_config_check(struct pcmcia_device *p_dev, void *priv_data) { if (p_dev->config_index == 0) @@ -168,8 +111,6 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev, void *priv_data) return pcmcia_request_io(p_dev); } - - static int __devinit sedlbauer_config(struct pcmcia_device *link) { int ret; @@ -180,27 +121,10 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link) link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_CHECK_VCC | CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; - /* - In this loop, we scan the CIS for configuration table entries, - each of which describes a valid card configuration, including - voltage, IO window, memory window, and interrupt settings. - - We make no assumptions about the card to be configured: we use - just the information available in the CIS. In an ideal world, - this would work for any PCMCIA card, but it requires a complete - and accurate CIS. In practice, a driver usually "knows" most of - these things without consulting the CIS, and most client drivers - will only use the CIS to fill in implementation-defined details. - */ ret = pcmcia_loop_config(link, sedlbauer_config_check, NULL); if (ret) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -228,14 +152,6 @@ failed: } /* sedlbauer_config */ -/*====================================================================== - - After a card is removed, sedlbauer_release() will unregister the - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void sedlbauer_release(struct pcmcia_device *link) { local_info_t *local = link->priv; diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c index 82f09b864846..282a4467ef19 100644 --- a/drivers/isdn/hisax/teles_cs.c +++ b/drivers/isdn/hisax/teles_cs.c @@ -44,26 +44,8 @@ MODULE_LICENSE("GPL"); static int protocol = 2; /* EURO-ISDN Default */ module_param(protocol, int, 0); -/*====================================================================*/ - -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card insertion - and ejection events. They are invoked from the teles_cs event - handler. -*/ - static int teles_cs_config(struct pcmcia_device *link) __devinit ; static void teles_cs_release(struct pcmcia_device *link); - -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void teles_detach(struct pcmcia_device *p_dev) __devexit ; typedef struct local_info_t { @@ -72,18 +54,6 @@ typedef struct local_info_t { int cardnr; } local_info_t; -/*====================================================================== - - teles_attach() creates an "instance" of the driver, allocatingx - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int __devinit teles_probe(struct pcmcia_device *link) { local_info_t *local; @@ -98,27 +68,11 @@ static int __devinit teles_probe(struct pcmcia_device *link) local->p_dev = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; return teles_cs_config(link); } /* teles_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void __devexit teles_detach(struct pcmcia_device *link) { local_info_t *info = link->priv; @@ -131,14 +85,6 @@ static void __devexit teles_detach(struct pcmcia_device *link) kfree(info); } /* teles_detach */ -/*====================================================================== - - teles_cs_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - static int teles_cs_configcheck(struct pcmcia_device *p_dev, void *priv_data) { int j; @@ -204,14 +150,6 @@ cs_failed: return -ENODEV; } /* teles_cs_config */ -/*====================================================================== - - After a card is removed, teles_cs_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void teles_cs_release(struct pcmcia_device *link) { local_info_t *local = link->priv; diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c index 5df89e742a33..57a1acfe22c4 100644 --- a/drivers/mtd/maps/pcmciamtd.c +++ b/drivers/mtd/maps/pcmciamtd.c @@ -321,11 +321,6 @@ static void pcmciamtd_set_vpp(struct map_info *map, int on) } -/* After a card is removed, pcmciamtd_release() will unregister the - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ - static void pcmciamtd_release(struct pcmcia_device *link) { struct pcmciamtd_dev *dev = link->priv; @@ -475,11 +470,6 @@ static void card_settings(struct pcmciamtd_dev *dev, struct pcmcia_device *p_dev } -/* pcmciamtd_config() is scheduled to run after a CARD_INSERTION event - * is received, to configure the PCMCIA socket, and to make the - * MTD device available to the system. - */ - static int pcmciamtd_config(struct pcmcia_device *link) { struct pcmciamtd_dev *dev = link->priv; @@ -676,12 +666,6 @@ static int pcmciamtd_resume(struct pcmcia_device *dev) } -/* This deletes a driver "instance". The device is de-registered - * with Card Services. If it has been released, all local data - * structures are freed. Otherwise, the structures will be freed - * when the device is released. - */ - static void pcmciamtd_detach(struct pcmcia_device *link) { struct pcmciamtd_dev *dev = link->priv; @@ -699,11 +683,6 @@ static void pcmciamtd_detach(struct pcmcia_device *link) } -/* pcmciamtd_attach() creates an "instance" of the driver, allocating - * local data structures for one device. The device is registered - * with Card Services. - */ - static int pcmciamtd_probe(struct pcmcia_device *link) { struct pcmciamtd_dev *dev; diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index ba52b0b6d93b..ff824e11f0b6 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -287,16 +287,7 @@ static int tc574_probe(struct pcmcia_device *link) dev->watchdog_timeo = TX_TIMEOUT; return tc574_config(link); -} /* tc574_attach */ - -/* - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -*/ +} static void tc574_detach(struct pcmcia_device *link) { @@ -311,12 +302,6 @@ static void tc574_detach(struct pcmcia_device *link) free_netdev(dev); } /* tc574_detach */ -/* - tc574_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. -*/ - static const char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"}; static int tc574_config(struct pcmcia_device *link) @@ -463,12 +448,6 @@ failed: } /* tc574_config */ -/* - After a card is removed, tc574_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. -*/ - static void tc574_release(struct pcmcia_device *link) { pcmcia_disable_device(link); diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index 551759c25a74..a07e22295330 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -175,14 +175,6 @@ static const struct ethtool_ops netdev_ethtool_ops; static void tc589_detach(struct pcmcia_device *p_dev); -/*====================================================================== - - tc589_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static const struct net_device_ops el3_netdev_ops = { .ndo_open = el3_open, .ndo_stop = el3_close, @@ -224,16 +216,7 @@ static int tc589_probe(struct pcmcia_device *link) SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); return tc589_config(link); -} /* tc589_attach */ - -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ +} static void tc589_detach(struct pcmcia_device *link) { @@ -248,14 +231,6 @@ static void tc589_detach(struct pcmcia_device *link) free_netdev(dev); } /* tc589_detach */ -/*====================================================================== - - tc589_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - static int tc589_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -350,14 +325,6 @@ failed: return -ENODEV; } /* tc589_config */ -/*====================================================================== - - After a card is removed, tc589_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void tc589_release(struct pcmcia_device *link) { pcmcia_disable_device(link); diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index fb5a39ba4801..9e8b28b271ae 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -139,14 +139,6 @@ static const struct net_device_ops axnet_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/*====================================================================== - - axnet_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int axnet_probe(struct pcmcia_device *link) { axnet_dev_t *info; @@ -175,15 +167,6 @@ static int axnet_probe(struct pcmcia_device *link) return axnet_config(link); } /* axnet_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void axnet_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -246,14 +229,6 @@ static int get_prom(struct pcmcia_device *link) return 1; } /* get_prom */ -/*====================================================================== - - axnet_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - static int try_io_port(struct pcmcia_device *link) { int j, ret; @@ -392,14 +367,6 @@ failed: return -ENODEV; } /* axnet_config */ -/*====================================================================== - - After a card is removed, axnet_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void axnet_release(struct pcmcia_device *link) { pcmcia_disable_device(link); diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c index a5d918ea5b13..b706a7249477 100644 --- a/drivers/net/pcmcia/com20020_cs.c +++ b/drivers/net/pcmcia/com20020_cs.c @@ -122,14 +122,6 @@ typedef struct com20020_dev_t { struct net_device *dev; } com20020_dev_t; -/*====================================================================== - - com20020_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int com20020_probe(struct pcmcia_device *p_dev) { com20020_dev_t *info; @@ -172,15 +164,6 @@ fail_alloc_info: return -ENOMEM; } /* com20020_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void com20020_detach(struct pcmcia_device *link) { struct com20020_dev_t *info = link->priv; @@ -219,14 +202,6 @@ static void com20020_detach(struct pcmcia_device *link) } /* com20020_detach */ -/*====================================================================== - - com20020_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - static int com20020_config(struct pcmcia_device *link) { struct arcnet_local *lp; @@ -314,14 +289,6 @@ failed: return -ENODEV; } /* com20020_config */ -/*====================================================================== - - After a card is removed, com20020_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void com20020_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "com20020_release\n"); diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index d3c9f016f791..bf7dff96d881 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -121,14 +121,6 @@ static irqreturn_t ibmtr_interrupt(int irq, void *dev_id) { return tok_interrupt(irq, dev); }; -/*====================================================================== - - ibmtr_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int __devinit ibmtr_attach(struct pcmcia_device *link) { ibmtr_dev_t *info; @@ -161,15 +153,6 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link) return ibmtr_config(link); } /* ibmtr_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void ibmtr_detach(struct pcmcia_device *link) { struct ibmtr_dev_t *info = link->priv; @@ -194,14 +177,6 @@ static void ibmtr_detach(struct pcmcia_device *link) kfree(info); } /* ibmtr_detach */ -/*====================================================================== - - ibmtr_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - token-ring device available to the system. - -======================================================================*/ - static int __devinit ibmtr_config(struct pcmcia_device *link) { ibmtr_dev_t *info = link->priv; @@ -297,14 +272,6 @@ failed: return -ENODEV; } /* ibmtr_config */ -/*====================================================================== - - After a card is removed, ibmtr_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void ibmtr_release(struct pcmcia_device *link) { ibmtr_dev_t *info = link->priv; diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index 8e5730c42ce6..1eca4f5a6e78 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -434,13 +434,6 @@ static const struct net_device_ops mace_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/* ---------------------------------------------------------------------------- -nmclan_attach - Creates an "instance" of the driver, allocating local data - structures for one device. The device is registered with Card - Services. ----------------------------------------------------------------------------- */ - static int nmclan_probe(struct pcmcia_device *link) { mace_private *lp; @@ -472,14 +465,6 @@ static int nmclan_probe(struct pcmcia_device *link) return nmclan_config(link); } /* nmclan_attach */ -/* ---------------------------------------------------------------------------- -nmclan_detach - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. ----------------------------------------------------------------------------- */ - static void nmclan_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -623,13 +608,6 @@ static int mace_init(mace_private *lp, unsigned int ioaddr, char *enet_addr) return 0; } /* mace_init */ -/* ---------------------------------------------------------------------------- -nmclan_config - This routine is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. ----------------------------------------------------------------------------- */ - static int nmclan_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -710,12 +688,6 @@ failed: return -ENODEV; } /* nmclan_config */ -/* ---------------------------------------------------------------------------- -nmclan_release - After a card is removed, nmclan_release() will unregister the - net device, and release the PCMCIA configuration. If the device - is still open, this will be postponed until it is closed. ----------------------------------------------------------------------------- */ static void nmclan_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "nmclan_release\n"); diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 22987e6a685e..5d7d1d3088ae 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -237,14 +237,6 @@ static const struct net_device_ops pcnet_netdev_ops = { #endif }; -/*====================================================================== - - pcnet_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int pcnet_probe(struct pcmcia_device *link) { pcnet_dev_t *info; @@ -266,15 +258,6 @@ static int pcnet_probe(struct pcmcia_device *link) return pcnet_config(link); } /* pcnet_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void pcnet_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -461,14 +444,6 @@ static hw_info_t *get_hwired(struct pcmcia_device *link) return &default_info; } /* get_hwired */ -/*====================================================================== - - pcnet_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - static int try_io_port(struct pcmcia_device *link) { int j, ret; @@ -665,14 +640,6 @@ failed: return -ENODEV; } /* pcnet_config */ -/*====================================================================== - - After a card is removed, pcnet_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void pcnet_release(struct pcmcia_device *link) { pcnet_dev_t *info = PRIV(link->priv); @@ -685,15 +652,6 @@ static void pcnet_release(struct pcmcia_device *link) pcmcia_disable_device(link); } -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. A CARD_REMOVAL event - also sets some flags to discourage the net drivers from trying - to talk to the card any more. - -======================================================================*/ - static int pcnet_suspend(struct pcmcia_device *link) { struct net_device *dev = link->priv; diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index e4c4fb626572..0af2fc8ec164 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -299,14 +299,6 @@ static const struct net_device_ops smc_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/*====================================================================== - - smc91c92_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int smc91c92_probe(struct pcmcia_device *link) { struct smc_private *smc; @@ -338,15 +330,6 @@ static int smc91c92_probe(struct pcmcia_device *link) return smc91c92_config(link); } /* smc91c92_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void smc91c92_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -819,14 +802,6 @@ static int check_sig(struct pcmcia_device *link) return -ENODEV; } -/*====================================================================== - - smc91c92_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - static int smc91c92_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -977,14 +952,6 @@ config_failed: return -ENODEV; } /* smc91c92_config */ -/*====================================================================== - - After a card is removed, smc91c92_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void smc91c92_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "smc91c92_release\n"); diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index 18cdc84a84bf..1fece617c069 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -266,33 +266,11 @@ static unsigned mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg); static void mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg, unsigned data, int len); -/* - * The event() function is this driver's Card Services event handler. - * It will be called by Card Services when an appropriate card status - * event is received. The config() and release() entry points are - * used to configure or release a socket, in response to card insertion - * and ejection events. They are invoked from the event handler. - */ - static int has_ce2_string(struct pcmcia_device * link); static int xirc2ps_config(struct pcmcia_device * link); static void xirc2ps_release(struct pcmcia_device * link); - -/**************** - * The attach() and detach() entry points are used to create and destroy - * "instances" of the driver, where each instance represents everything - * needed to manage one actual PCMCIA card. - */ - static void xirc2ps_detach(struct pcmcia_device *p_dev); -/**************** - * You'll also need to prototype all the functions that will actually - * be used to talk to your device. See 'pcmem_cs' for a good example - * of a fully self-sufficient driver; the other drivers rely more or - * less on other parts of the kernel. - */ - static irqreturn_t xirc2ps_interrupt(int irq, void *dev_id); typedef struct local_info_t { @@ -500,16 +478,6 @@ static const struct net_device_ops netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/**************** - * xirc2ps_attach() creates an "instance" of the driver, allocating - * local data structures for one device. The device is registered - * with Card Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a - * card insertion event. - */ - static int xirc2ps_probe(struct pcmcia_device *link) { @@ -539,13 +507,6 @@ xirc2ps_probe(struct pcmcia_device *link) return xirc2ps_config(link); } /* xirc2ps_attach */ -/**************** - * This deletes a driver "instance". The device is de-registered - * with Card Services. If it has been released, all local data - * structures are freed. Otherwise, the structures will be freed - * when the device is released. - */ - static void xirc2ps_detach(struct pcmcia_device *link) { @@ -733,11 +694,6 @@ static int pcmcia_get_mac_ce(struct pcmcia_device *p_dev, }; -/**************** - * xirc2ps_config() is scheduled to run after a CARD_INSERTION event - * is received, to configure the PCMCIA socket, and to make the - * ethernet device available to the system. - */ static int xirc2ps_config(struct pcmcia_device * link) { @@ -861,10 +817,6 @@ xirc2ps_config(struct pcmcia_device * link) if ((err=pcmcia_request_irq(link, xirc2ps_interrupt))) goto config_error; - /**************** - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping. - */ link->config_flags |= CONF_ENABLE_IRQ; if (do_sound) link->config_flags |= CONF_ENABLE_SPKR; @@ -980,11 +932,6 @@ xirc2ps_config(struct pcmcia_device * link) return -ENODEV; } /* xirc2ps_config */ -/**************** - * After a card is removed, xirc2ps_release() will unregister the net - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void xirc2ps_release(struct pcmcia_device *link) { diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index b084278f36b7..df2484d45474 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -53,42 +53,15 @@ MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340 PCMCIA cards"); /*====================================================================*/ -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card - insertion and ejection events. They are invoked from the airo_cs - event handler. -*/ - static int airo_config(struct pcmcia_device *link); static void airo_release(struct pcmcia_device *link); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void airo_detach(struct pcmcia_device *p_dev); typedef struct local_info_t { struct net_device *eth_dev; } local_info_t; -/*====================================================================== - - airo_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - - ======================================================================*/ - static int airo_probe(struct pcmcia_device *p_dev) { local_info_t *local; @@ -106,15 +79,6 @@ static int airo_probe(struct pcmcia_device *p_dev) return airo_config(p_dev); } /* airo_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - - ======================================================================*/ - static void airo_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "airo_detach\n"); @@ -129,14 +93,6 @@ static void airo_detach(struct pcmcia_device *link) kfree(link->priv); } /* airo_detach */ -/*====================================================================== - - airo_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - - ======================================================================*/ - static int airo_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { if (p_dev->config_index == 0) @@ -158,20 +114,6 @@ static int airo_config(struct pcmcia_device *link) link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; - /* - * In this loop, we scan the CIS for configuration table - * entries, each of which describes a valid card - * configuration, including voltage, IO window, memory window, - * and interrupt settings. - * - * We make no assumptions about the card to be configured: we - * use just the information available in the CIS. In an ideal - * world, this would work for any PCMCIA card, but it requires - * a complete and accurate CIS. In practice, a driver usually - * "knows" most of these things without consulting the CIS, - * and most client drivers will only use the CIS to fill in - * implementation-defined details. - */ ret = pcmcia_loop_config(link, airo_cs_config_check, NULL); if (ret) goto failed; @@ -179,11 +121,6 @@ static int airo_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -200,14 +137,6 @@ static int airo_config(struct pcmcia_device *link) return -ENODEV; } /* airo_config */ -/*====================================================================== - - After a card is removed, airo_release() will unregister the - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - - ======================================================================*/ - static void airo_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "airo_release\n"); diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index fabe91a8db2b..c96e19da2949 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -63,42 +63,15 @@ MODULE_SUPPORTED_DEVICE("Atmel at76c50x PCMCIA cards"); /*====================================================================*/ -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card - insertion and ejection events. They are invoked from the atmel_cs - event handler. -*/ - static int atmel_config(struct pcmcia_device *link); static void atmel_release(struct pcmcia_device *link); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void atmel_detach(struct pcmcia_device *p_dev); typedef struct local_info_t { struct net_device *eth_dev; } local_info_t; -/*====================================================================== - - atmel_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - - ======================================================================*/ - static int atmel_probe(struct pcmcia_device *p_dev) { local_info_t *local; @@ -116,15 +89,6 @@ static int atmel_probe(struct pcmcia_device *p_dev) return atmel_config(p_dev); } /* atmel_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - - ======================================================================*/ - static void atmel_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "atmel_detach\n"); @@ -134,14 +98,6 @@ static void atmel_detach(struct pcmcia_device *link) kfree(link->priv); } -/*====================================================================== - - atmel_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - - ======================================================================*/ - /* Call-back function to interrogate PCMCIA-specific information about the current existance of the card */ static int card_present(void *arg) @@ -176,18 +132,6 @@ static int atmel_config(struct pcmcia_device *link) link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; - /* - In this loop, we scan the CIS for configuration table entries, - each of which describes a valid card configuration, including - voltage, IO window, memory window, and interrupt settings. - - We make no assumptions about the card to be configured: we use - just the information available in the CIS. In an ideal world, - this would work for any PCMCIA card, but it requires a complete - and accurate CIS. In practice, a driver usually "knows" most of - these things without consulting the CIS, and most client drivers - will only use the CIS to fill in implementation-defined details. - */ if (pcmcia_loop_config(link, atmel_config_check, NULL)) goto failed; @@ -196,11 +140,6 @@ static int atmel_config(struct pcmcia_device *link) goto failed; } - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -223,14 +162,6 @@ static int atmel_config(struct pcmcia_device *link) return -ENODEV; } -/*====================================================================== - - After a card is removed, atmel_release() will unregister the - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - - ======================================================================*/ - static void atmel_release(struct pcmcia_device *link) { struct net_device *dev = ((local_info_t*)link->priv)->eth_dev; diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index ba645701179a..bd8a4134edeb 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -466,9 +466,6 @@ static void prism2_detach(struct pcmcia_device *link) } -/* run after a CARD_INSERTION event is received to configure the PCMCIA - * socket and make the device available to the system */ - static int prism2_config_check(struct pcmcia_device *p_dev, void *priv_data) { if (p_dev->config_index == 0) @@ -530,11 +527,6 @@ static int prism2_config(struct pcmcia_device *link) if (ret) goto failed_unlock; - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ ret = pcmcia_enable_device(link); if (ret) goto failed_unlock; diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index c2bd2f0304bb..ff1280f41336 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -760,15 +760,6 @@ static int if_cs_host_to_card(struct lbs_private *priv, } -/********************************************************************/ -/* Card Services */ -/********************************************************************/ - -/* - * After a card is removed, if_cs_release() will unregister the - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void if_cs_release(struct pcmcia_device *p_dev) { struct if_cs_card *card = p_dev->priv; @@ -784,16 +775,6 @@ static void if_cs_release(struct pcmcia_device *p_dev) } -/* - * This creates an "instance" of the driver, allocating local data - * structures for one device. The device is registered with Card - * Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a card - * insertion event. - */ - static int if_cs_ioprobe(struct pcmcia_device *p_dev, void *priv_data) { p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; @@ -849,11 +830,6 @@ static int if_cs_probe(struct pcmcia_device *p_dev) goto out1; } - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ ret = pcmcia_enable_device(p_dev); if (ret) { lbs_pr_err("error in pcmcia_enable_device\n"); @@ -950,12 +926,6 @@ out: } -/* - * This deletes a driver "instance". The device is de-registered with - * Card Services. If it has been released, all local data structures - * are freed. Otherwise, the structures will be freed when the device - * is released. - */ static void if_cs_detach(struct pcmcia_device *p_dev) { struct if_cs_card *card = p_dev->priv; diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index 2b1f554af0b2..71b3d68b9403 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -92,14 +92,6 @@ orinoco_cs_hard_reset(struct orinoco_private *priv) /* PCMCIA stuff */ /********************************************************************/ -/* - * This creates an "instance" of the driver, allocating local data - * structures for one device. The device is registered with Card - * Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a card - * insertion event. */ static int orinoco_cs_probe(struct pcmcia_device *link) { @@ -119,12 +111,6 @@ orinoco_cs_probe(struct pcmcia_device *link) return orinoco_cs_config(link); } /* orinoco_cs_attach */ -/* - * This deletes a driver "instance". The device is de-registered with - * Card Services. If it has been released, all local data structures - * are freed. Otherwise, the structures will be freed when the device - * is released. - */ static void orinoco_cs_detach(struct pcmcia_device *link) { struct orinoco_private *priv = link->priv; @@ -136,12 +122,6 @@ static void orinoco_cs_detach(struct pcmcia_device *link) free_orinocodev(priv); } /* orinoco_cs_detach */ -/* - * orinoco_cs_config() is scheduled to run after a CARD_INSERTION - * event is received, to configure the PCMCIA socket, and to make the - * device available to the system. - */ - static int orinoco_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { if (p_dev->config_index == 0) @@ -158,20 +138,6 @@ orinoco_cs_config(struct pcmcia_device *link) int ret; void __iomem *mem; - /* - * In this loop, we scan the CIS for configuration table - * entries, each of which describes a valid card - * configuration, including voltage, IO window, memory window, - * and interrupt settings. - * - * We make no assumptions about the card to be configured: we - * use just the information available in the CIS. In an ideal - * world, this would work for any PCMCIA card, but it requires - * a complete and accurate CIS. In practice, a driver usually - * "knows" most of these things without consulting the CIS, - * and most client drivers will only use the CIS to fill in - * implementation-defined details. - */ link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC | CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; if (ignore_cis_vcc) @@ -199,11 +165,6 @@ orinoco_cs_config(struct pcmcia_device *link) hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -228,11 +189,6 @@ orinoco_cs_config(struct pcmcia_device *link) return -ENODEV; } /* orinoco_cs_config */ -/* - * After a card is removed, orinoco_cs_release() will unregister the - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void orinoco_cs_release(struct pcmcia_device *link) { diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index 1314cf204f12..fb859a5ad2eb 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -153,14 +153,6 @@ spectrum_cs_stop_firmware(struct orinoco_private *priv, int idle) /* PCMCIA stuff */ /********************************************************************/ -/* - * This creates an "instance" of the driver, allocating local data - * structures for one device. The device is registered with Card - * Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a card - * insertion event. */ static int spectrum_cs_probe(struct pcmcia_device *link) { @@ -181,12 +173,6 @@ spectrum_cs_probe(struct pcmcia_device *link) return spectrum_cs_config(link); } /* spectrum_cs_attach */ -/* - * This deletes a driver "instance". The device is de-registered with - * Card Services. If it has been released, all local data structures - * are freed. Otherwise, the structures will be freed when the device - * is released. - */ static void spectrum_cs_detach(struct pcmcia_device *link) { struct orinoco_private *priv = link->priv; @@ -198,12 +184,6 @@ static void spectrum_cs_detach(struct pcmcia_device *link) free_orinocodev(priv); } /* spectrum_cs_detach */ -/* - * spectrum_cs_config() is scheduled to run after a CARD_INSERTION - * event is received, to configure the PCMCIA socket, and to make the - * device available to the system. - */ - static int spectrum_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { @@ -221,20 +201,6 @@ spectrum_cs_config(struct pcmcia_device *link) int ret; void __iomem *mem; - /* - * In this loop, we scan the CIS for configuration table - * entries, each of which describes a valid card - * configuration, including voltage, IO window, memory window, - * and interrupt settings. - * - * We make no assumptions about the card to be configured: we - * use just the information available in the CIS. In an ideal - * world, this would work for any PCMCIA card, but it requires - * a complete and accurate CIS. In practice, a driver usually - * "knows" most of these things without consulting the CIS, - * and most client drivers will only use the CIS to fill in - * implementation-defined details. - */ link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC | CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; if (ignore_cis_vcc) @@ -263,11 +229,6 @@ spectrum_cs_config(struct pcmcia_device *link) hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); hw->eeprom_pda = true; - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -296,11 +257,6 @@ spectrum_cs_config(struct pcmcia_device *link) return -ENODEV; } /* spectrum_cs_config */ -/* - * After a card is removed, spectrum_cs_release() will unregister the - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void spectrum_cs_release(struct pcmcia_device *link) { diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index b5a2c9e31de2..af5b17ce5a15 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -168,13 +168,6 @@ static int bc; */ static char *phy_addr = NULL; - -/* A struct pcmcia_device structure has fields for most things that are needed - to keep track of a socket, but there will usually be some device - specific information that also needs to be kept track of. The - 'priv' pointer in a struct pcmcia_device structure can be used to point to - a device-specific private data structure, like this. -*/ static unsigned int ray_mem_speed = 500; /* WARNING: THIS DRIVER IS NOT CAPABLE OF HANDLING MULTIPLE DEVICES! */ @@ -289,14 +282,6 @@ static const struct net_device_ops ray_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/*============================================================================= - ray_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. -=============================================================================*/ static int ray_probe(struct pcmcia_device *p_dev) { ray_dev_t *local; @@ -351,12 +336,6 @@ fail_alloc_dev: return -ENOMEM; } /* ray_attach */ -/*============================================================================= - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. -=============================================================================*/ static void ray_detach(struct pcmcia_device *link) { struct net_device *dev; @@ -379,11 +358,6 @@ static void ray_detach(struct pcmcia_device *link) dev_dbg(&link->dev, "ray_cs ray_detach ending\n"); } /* ray_detach */ -/*============================================================================= - ray_config() is run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. -=============================================================================*/ #define MAX_TUPLE_SIZE 128 static int ray_config(struct pcmcia_device *link) { @@ -409,9 +383,6 @@ static int ray_config(struct pcmcia_device *link) goto failed; dev->irq = link->irq; - /* This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping. - */ ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -771,11 +742,7 @@ static void join_net(u_long data) local->card_status = CARD_DOING_ACQ; } -/*============================================================================ - After a card is removed, ray_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. -=============================================================================*/ + static void ray_release(struct pcmcia_device *link) { struct net_device *dev = link->priv; diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index d3ed38f558fa..ca3f8961fa27 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -77,13 +77,6 @@ #define WL3501_RESUME 0 #define WL3501_SUSPEND 1 -/* - * The event() function is this driver's Card Services event handler. It will - * be called by Card Services when an appropriate card status event is - * received. The config() and release() entry points are used to configure or - * release a socket, in response to card insertion and ejection events. They - * are invoked from the wl24 event handler. - */ static int wl3501_config(struct pcmcia_device *link); static void wl3501_release(struct pcmcia_device *link); @@ -1868,15 +1861,6 @@ static const struct net_device_ops wl3501_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/** - * wl3501_attach - creates an "instance" of the driver - * - * Creates an "instance" of the driver, allocating local data structures for - * one device. The device is registered with Card Services. - * - * The dev_link structure is initialized, but we don't actually configure the - * card at this point -- we wait until we receive a card insertion event. - */ static int wl3501_probe(struct pcmcia_device *p_dev) { struct net_device *dev; @@ -1912,14 +1896,6 @@ out_link: return -ENOMEM; } -/** - * wl3501_config - configure the PCMCIA socket and make eth device available - * @link - FILL_IN - * - * wl3501_config() is scheduled to run after a CARD_INSERTION event is - * received, to configure the PCMCIA socket, and to make the ethernet device - * available to the system. - */ static int wl3501_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -1950,9 +1926,6 @@ static int wl3501_config(struct pcmcia_device *link) if (ret) goto failed; - /* This actually configures the PCMCIA socket -- setting up the I/O - * windows and the interrupt mapping. */ - ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -2008,14 +1981,6 @@ failed: return -ENODEV; } -/** - * wl3501_release - unregister the net, release PCMCIA configuration - * @arg - link - * - * After a card is removed, wl3501_release() will unregister the net device, - * and release the PCMCIA configuration. If the device is still open, this - * will be postponed until it is closed. - */ static void wl3501_release(struct pcmcia_device *link) { pcmcia_disable_device(link); diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c index 6f4c9560b2b9..787ebdeae310 100644 --- a/drivers/parport/parport_cs.c +++ b/drivers/parport/parport_cs.c @@ -80,14 +80,6 @@ static void parport_detach(struct pcmcia_device *p_dev); static int parport_config(struct pcmcia_device *link); static void parport_cs_release(struct pcmcia_device *); -/*====================================================================== - - parport_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int parport_probe(struct pcmcia_device *link) { parport_info_t *info; @@ -105,15 +97,6 @@ static int parport_probe(struct pcmcia_device *link) return parport_config(link); } /* parport_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void parport_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "parport_detach\n"); @@ -123,14 +106,6 @@ static void parport_detach(struct pcmcia_device *link) kfree(link->priv); } /* parport_detach */ -/*====================================================================== - - parport_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - parport device available to the system. - -======================================================================*/ - static int parport_config_check(struct pcmcia_device *p_dev, void *priv_data) { p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; @@ -187,14 +162,6 @@ failed: return -ENODEV; } /* parport_config */ -/*====================================================================== - - After a card is removed, parport_cs_release() will unregister the - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void parport_cs_release(struct pcmcia_device *link) { parport_info_t *info = link->priv; diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index 07b73ca2a7e0..9326c2c14880 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -1530,15 +1530,6 @@ static int nsp_eh_host_reset(struct scsi_cmnd *SCpnt) PCMCIA functions **********************************************************************/ -/*====================================================================== - nsp_cs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. -======================================================================*/ static int nsp_cs_probe(struct pcmcia_device *link) { scsi_info_t *info; @@ -1563,12 +1554,6 @@ static int nsp_cs_probe(struct pcmcia_device *link) } /* nsp_cs_attach */ -/*====================================================================== - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. -======================================================================*/ static void nsp_cs_detach(struct pcmcia_device *link) { nsp_dbg(NSP_DEBUG_INIT, "in, link=0x%p", link); @@ -1581,12 +1566,6 @@ static void nsp_cs_detach(struct pcmcia_device *link) } /* nsp_cs_detach */ -/*====================================================================== - nsp_cs_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. -======================================================================*/ - static int nsp_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { nsp_hw_data *data = priv_data; @@ -1697,11 +1676,6 @@ static int nsp_cs_config(struct pcmcia_device *link) } /* nsp_cs_config */ -/*====================================================================== - After a card is removed, nsp_cs_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. -======================================================================*/ static void nsp_cs_release(struct pcmcia_device *link) { scsi_info_t *info = link->priv; diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 5047224d2625..649ce543327b 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -262,13 +262,6 @@ static const struct serial_quirk quirks[] = { static int serial_config(struct pcmcia_device * link); -/*====================================================================== - - After a card is removed, serial_remove() will unregister - the serial device(s), and release the PCMCIA configuration. - -======================================================================*/ - static void serial_remove(struct pcmcia_device *link) { struct serial_info *info = link->priv; @@ -311,14 +304,6 @@ static int serial_resume(struct pcmcia_device *link) return 0; } -/*====================================================================== - - serial_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int serial_probe(struct pcmcia_device *link) { struct serial_info *info; @@ -339,15 +324,6 @@ static int serial_probe(struct pcmcia_device *link) return serial_config(link); } -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void serial_detach(struct pcmcia_device *link) { struct serial_info *info = link->priv; @@ -631,14 +607,6 @@ static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data) } -/*====================================================================== - - serial_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - serial device available to the system. - -======================================================================*/ - static int serial_config(struct pcmcia_device * link) { struct serial_info *info = link->priv; diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c index a885cd7cfd7f..0345b4caba73 100644 --- a/drivers/staging/comedi/drivers/cb_das16_cs.c +++ b/drivers/staging/comedi/drivers/cb_das16_cs.c @@ -736,11 +736,6 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c index def167eac1d8..0b32a2df7768 100644 --- a/drivers/staging/comedi/drivers/das08_cs.c +++ b/drivers/staging/comedi/drivers/das08_cs.c @@ -114,40 +114,15 @@ static void das08_pcmcia_release(struct pcmcia_device *link); static int das08_pcmcia_suspend(struct pcmcia_device *p_dev); static int das08_pcmcia_resume(struct pcmcia_device *p_dev); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static int das08_pcmcia_attach(struct pcmcia_device *); static void das08_pcmcia_detach(struct pcmcia_device *); -/* - You'll also need to prototype all the functions that will actually - be used to talk to your device. See 'memory_cs' for a good example - of a fully self-sufficient driver; the other drivers rely more or - less on other parts of the kernel. -*/ - struct local_info_t { struct pcmcia_device *link; int stop; struct bus_operations *bus; }; -/*====================================================================== - - das08_pcmcia_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int das08_pcmcia_attach(struct pcmcia_device *link) { struct local_info_t *local; @@ -168,15 +143,6 @@ static int das08_pcmcia_attach(struct pcmcia_device *link) return 0; } /* das08_pcmcia_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void das08_pcmcia_detach(struct pcmcia_device *link) { @@ -200,15 +166,6 @@ static int das08_pcmcia_config_loop(struct pcmcia_device *p_dev, return pcmcia_request_io(p_dev); } - -/*====================================================================== - - das08_pcmcia_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - static void das08_pcmcia_config(struct pcmcia_device *link) { int ret; @@ -226,11 +183,6 @@ static void das08_pcmcia_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -242,32 +194,12 @@ failed: } /* das08_pcmcia_config */ -/*====================================================================== - - After a card is removed, das08_pcmcia_release() will unregister the - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void das08_pcmcia_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "das08_pcmcia_release\n"); pcmcia_disable_device(link); } /* das08_pcmcia_release */ -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. - - When a CARD_REMOVAL event is received, we immediately set a - private flag to block future accesses to this device. All the - functions that actually access the device should check this flag - to make sure the card is still present. - -======================================================================*/ - static int das08_pcmcia_suspend(struct pcmcia_device *link) { struct local_info_t *local = link->priv; diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c index 9cc8401765bd..fc772a8a55c6 100644 --- a/drivers/staging/comedi/drivers/ni_daq_700.c +++ b/drivers/staging/comedi/drivers/ni_daq_700.c @@ -434,47 +434,20 @@ static int dio700_detach(struct comedi_device *dev) return 0; }; -/* PCMCIA crap -- watch your words, please! */ - static void dio700_config(struct pcmcia_device *link); static void dio700_release(struct pcmcia_device *link); static int dio700_cs_suspend(struct pcmcia_device *p_dev); static int dio700_cs_resume(struct pcmcia_device *p_dev); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static int dio700_cs_attach(struct pcmcia_device *); static void dio700_cs_detach(struct pcmcia_device *); -/* - You'll also need to prototype all the functions that will actually - be used to talk to your device. See 'memory_cs' for a good example - of a fully self-sufficient driver; the other drivers rely more or - less on other parts of the kernel. -*/ - struct local_info_t { struct pcmcia_device *link; int stop; struct bus_operations *bus; }; -/*====================================================================== - - dio700_cs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int dio700_cs_attach(struct pcmcia_device *link) { struct local_info_t *local; @@ -497,15 +470,6 @@ static int dio700_cs_attach(struct pcmcia_device *link) return 0; } /* dio700_cs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void dio700_cs_detach(struct pcmcia_device *link) { @@ -521,14 +485,6 @@ static void dio700_cs_detach(struct pcmcia_device *link) } /* dio700_cs_detach */ -/*====================================================================== - - dio700_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev, void *priv_data) { @@ -559,11 +515,6 @@ static void dio700_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ ret = pcmcia_enable_device(link); if (ret != 0) goto failed; @@ -583,18 +534,6 @@ static void dio700_release(struct pcmcia_device *link) pcmcia_disable_device(link); } /* dio700_release */ -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. - - When a CARD_REMOVAL event is received, we immediately set a - private flag to block future accesses to this device. All the - functions that actually access the device should check this flag - to make sure the card is still present. - -======================================================================*/ - static int dio700_cs_suspend(struct pcmcia_device *link) { struct local_info_t *local = link->priv; diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c index b3f7c66e25c2..c9c28584db67 100644 --- a/drivers/staging/comedi/drivers/ni_daq_dio24.c +++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c @@ -186,47 +186,20 @@ static int dio24_detach(struct comedi_device *dev) return 0; }; -/* PCMCIA crap -- watch your words! */ - static void dio24_config(struct pcmcia_device *link); static void dio24_release(struct pcmcia_device *link); static int dio24_cs_suspend(struct pcmcia_device *p_dev); static int dio24_cs_resume(struct pcmcia_device *p_dev); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static int dio24_cs_attach(struct pcmcia_device *); static void dio24_cs_detach(struct pcmcia_device *); -/* - You'll also need to prototype all the functions that will actually - be used to talk to your device. See 'memory_cs' for a good example - of a fully self-sufficient driver; the other drivers rely more or - less on other parts of the kernel. -*/ - struct local_info_t { struct pcmcia_device *link; int stop; struct bus_operations *bus; }; -/*====================================================================== - - dio24_cs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int dio24_cs_attach(struct pcmcia_device *link) { struct local_info_t *local; @@ -249,15 +222,6 @@ static int dio24_cs_attach(struct pcmcia_device *link) return 0; } /* dio24_cs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void dio24_cs_detach(struct pcmcia_device *link) { @@ -273,14 +237,6 @@ static void dio24_cs_detach(struct pcmcia_device *link) } /* dio24_cs_detach */ -/*====================================================================== - - dio24_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev, void *priv_data) { @@ -310,11 +266,6 @@ static void dio24_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -334,18 +285,6 @@ static void dio24_release(struct pcmcia_device *link) pcmcia_disable_device(link); } /* dio24_release */ -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. - - When a CARD_REMOVAL event is received, we immediately set a - private flag to block future accesses to this device. All the - functions that actually access the device should check this flag - to make sure the card is still present. - -======================================================================*/ - static int dio24_cs_suspend(struct pcmcia_device *link) { struct local_info_t *local = link->priv; diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c index 6b7c5d043b0a..6facbc8bf776 100644 --- a/drivers/staging/comedi/drivers/ni_labpc_cs.c +++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c @@ -152,59 +152,20 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it) return labpc_common_attach(dev, iobase, irq, 0); } -/*====================================================================*/ - -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card - insertion and ejection events. They are invoked from the dummy - event handler. - - Kernel version 2.6.16 upwards uses suspend() and resume() functions - instead of an event() function. -*/ - static void labpc_config(struct pcmcia_device *link); static void labpc_release(struct pcmcia_device *link); static int labpc_cs_suspend(struct pcmcia_device *p_dev); static int labpc_cs_resume(struct pcmcia_device *p_dev); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static int labpc_cs_attach(struct pcmcia_device *); static void labpc_cs_detach(struct pcmcia_device *); -/* - You'll also need to prototype all the functions that will actually - be used to talk to your device. See 'memory_cs' for a good example - of a fully self-sufficient driver; the other drivers rely more or - less on other parts of the kernel. -*/ - struct local_info_t { struct pcmcia_device *link; int stop; struct bus_operations *bus; }; -/*====================================================================== - - labpc_cs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int labpc_cs_attach(struct pcmcia_device *link) { struct local_info_t *local; @@ -225,15 +186,6 @@ static int labpc_cs_attach(struct pcmcia_device *link) return 0; } /* labpc_cs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void labpc_cs_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "labpc_cs_detach\n"); @@ -252,14 +204,6 @@ static void labpc_cs_detach(struct pcmcia_device *link) } /* labpc_cs_detach */ -/*====================================================================== - - labpc_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev, void *priv_data) { @@ -288,11 +232,6 @@ static void labpc_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -311,18 +250,6 @@ static void labpc_release(struct pcmcia_device *link) pcmcia_disable_device(link); } /* labpc_release */ -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. - - When a CARD_REMOVAL event is received, we immediately set a - private flag to block future accesses to this device. All the - functions that actually access the device should check this flag - to make sure the card is still present. - -======================================================================*/ - static int labpc_cs_suspend(struct pcmcia_device *link) { struct local_info_t *local = link->priv; @@ -340,8 +267,6 @@ static int labpc_cs_resume(struct pcmcia_device *link) return 0; } /* labpc_cs_resume */ -/*====================================================================*/ - static struct pcmcia_device_id labpc_cs_ids[] = { /* N.B. These IDs should match those in labpc_cs_boards (ni_labpc.c) */ PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0103), /* daqcard-1200 */ diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c index 32fecf57868d..ebba9bb47777 100644 --- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c +++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c @@ -968,43 +968,14 @@ static int daqp_detach(struct comedi_device *dev) ======================================================================*/ -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card - insertion and ejection events. - - Kernel version 2.6.16 upwards uses suspend() and resume() functions - instead of an event() function. -*/ - static void daqp_cs_config(struct pcmcia_device *link); static void daqp_cs_release(struct pcmcia_device *link); static int daqp_cs_suspend(struct pcmcia_device *p_dev); static int daqp_cs_resume(struct pcmcia_device *p_dev); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static int daqp_cs_attach(struct pcmcia_device *); static void daqp_cs_detach(struct pcmcia_device *); -/*====================================================================== - - daqp_cs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int daqp_cs_attach(struct pcmcia_device *link) { struct local_info_t *local; @@ -1035,15 +1006,6 @@ static int daqp_cs_attach(struct pcmcia_device *link) return 0; } /* daqp_cs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void daqp_cs_detach(struct pcmcia_device *link) { struct local_info_t *dev = link->priv; @@ -1059,15 +1021,6 @@ static void daqp_cs_detach(struct pcmcia_device *link) } /* daqp_cs_detach */ -/*====================================================================== - - daqp_cs_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - - static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev, void *priv_data) { if (p_dev->config_index == 0) @@ -1094,11 +1047,6 @@ static void daqp_cs_config(struct pcmcia_device *link) if (ret) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -1117,18 +1065,6 @@ static void daqp_cs_release(struct pcmcia_device *link) pcmcia_disable_device(link); } /* daqp_cs_release */ -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. - - When a CARD_REMOVAL event is received, we immediately set a - private flag to block future accesses to this device. All the - functions that actually access the device should check this flag - to make sure the card is still present. - -======================================================================*/ - static int daqp_cs_suspend(struct pcmcia_device *link) { struct local_info_t *local = link->priv; diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c index aa3cc516fe18..6555891e149c 100644 --- a/drivers/staging/wlags49_h2/wl_cs.c +++ b/drivers/staging/wlags49_h2/wl_cs.c @@ -163,27 +163,6 @@ static int wl_adapter_attach(struct pcmcia_device *link) -/******************************************************************************* - * wl_adapter_detach() - ******************************************************************************* - * - * DESCRIPTION: - * - * This deletes a driver "instance". The device is de-registered with Card - * Services. If it has been released, then the net device is unregistered, and - * all local data structures are freed. Otherwise, the structures will be - * freed when the device is released. - * - * PARAMETERS: - * - * link - pointer to the dev_link_t structure representing the device to - * detach - * - * RETURNS: - * - * N/A - * - ******************************************************************************/ static void wl_adapter_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -207,26 +186,6 @@ static void wl_adapter_detach(struct pcmcia_device *link) /*============================================================================*/ -/******************************************************************************* - * wl_adapter_release() - ******************************************************************************* - * - * DESCRIPTION: - * - * After a card is removed, this routine will release the PCMCIA - * configuration. If the device is still open, this will be postponed until it - * is closed. - * - * PARAMETERS: - * - * arg - a u_long representing a pointer to a dev_link_t structure for the - * device to be released. - * - * RETURNS: - * - * N/A - * - ******************************************************************************/ void wl_adapter_release(struct pcmcia_device *link) { DBG_FUNC("wl_adapter_release"); @@ -266,26 +225,6 @@ static int wl_adapter_resume(struct pcmcia_device *link) return 0; } /* wl_adapter_resume */ -/******************************************************************************* - * wl_adapter_insert() - ******************************************************************************* - * - * DESCRIPTION: - * - * wl_adapter_insert() is scheduled to run after a CARD_INSERTION event is - * received, to configure the PCMCIA socket, and to make the ethernet device - * available to the system. - * - * PARAMETERS: - * - * link - pointer to the dev_link_t structure representing the device to - * insert - * - * RETURNS: - * - * N/A - * - ******************************************************************************/ void wl_adapter_insert(struct pcmcia_device *link) { struct net_device *dev; diff --git a/drivers/staging/wlags49_h2/wl_main.c b/drivers/staging/wlags49_h2/wl_main.c index 88d0d472142f..8e3536acbf46 100644 --- a/drivers/staging/wlags49_h2/wl_main.c +++ b/drivers/staging/wlags49_h2/wl_main.c @@ -414,25 +414,6 @@ extern memimage fw_image; // firmware image to be downloaded #endif /* HCF_STA */ -/******************************************************************************* - * wl_insert() - ******************************************************************************* - * - * DESCRIPTION: - * - * wl_insert() is scheduled to run after a CARD_INSERTION event is - * received, to configure the PCMCIA socket, and to make the ethernet device - * available to the system. - * - * PARAMETERS: - * - * dev - a pointer to the net_device struct of the wireless device - * - * RETURNS: - * - * TRUE or FALSE - * - ******************************************************************************/ int wl_insert( struct net_device *dev ) { int result = 0; -- cgit v1.2.3