From 4125758074279115346c1f17c986d24cd1ab799c Mon Sep 17 00:00:00 2001 From: Song Liu Date: Mon, 23 May 2016 17:25:06 -0700 Subject: right meaning of PARITY_ENABLE_RMW and PARITY_PREFER_RMW In current handle_stripe_dirtying, the code prefers rmw with PARITY_ENABLE_RMW; while prefers rcw with PARITY_PREFER_RMW. This patch reverses this behavior. Signed-off-by: Song Liu Signed-off-by: Shaohua Li --- drivers/md/raid5.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/md') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 8959e6dd31dd..ad9e15a3ef51 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3600,7 +3600,7 @@ static void handle_stripe_dirtying(struct r5conf *conf, pr_debug("for sector %llu, rmw=%d rcw=%d\n", (unsigned long long)sh->sector, rmw, rcw); set_bit(STRIPE_HANDLE, &sh->state); - if ((rmw < rcw || (rmw == rcw && conf->rmw_level == PARITY_ENABLE_RMW)) && rmw > 0) { + if ((rmw < rcw || (rmw == rcw && conf->rmw_level == PARITY_PREFER_RMW)) && rmw > 0) { /* prefer read-modify-write, but need to get some data */ if (conf->mddev->queue) blk_add_trace_msg(conf->mddev->queue, @@ -3627,7 +3627,7 @@ static void handle_stripe_dirtying(struct r5conf *conf, } } } - if ((rcw < rmw || (rcw == rmw && conf->rmw_level != PARITY_ENABLE_RMW)) && rcw > 0) { + if ((rcw < rmw || (rcw == rmw && conf->rmw_level != PARITY_PREFER_RMW)) && rcw > 0) { /* want reconstruct write, but need to get some data */ int qread =0; rcw = 0; -- cgit v1.2.3 From bb8bf15bd6f7c3432ce9ad631f2f59c49c1e1853 Mon Sep 17 00:00:00 2001 From: Guoqing Jiang Date: Thu, 2 Jun 2016 23:32:04 -0400 Subject: md-cluster: fix deadlock issue when add disk to an recoverying array Add a disk to an array which is performing recovery is a little complicated, we need to do both reap the sync thread and perform add disk for the case, then it caused deadlock as follows. linux44:~ # ps aux|grep md|grep D root 1822 0.0 0.0 0 0 ? D 16:50 0:00 [md127_resync] root 1848 0.0 0.0 19860 952 pts/0 D+ 16:50 0:00 mdadm --manage /dev/md127 --re-add /dev/vdb linux44:~ # cat /proc/1848/stack [] kthread_stop+0x6e/0x120 [] md_unregister_thread+0x40/0x80 [md_mod] [] md_reap_sync_thread+0x15/0x150 [md_mod] [] action_store+0x260/0x270 [md_mod] [] md_attr_store+0xb4/0x100 [md_mod] [] sysfs_write_file+0xbe/0x140 [] vfs_write+0xb8/0x1e0 [] SyS_write+0x48/0xa0 [] system_call_fastpath+0x16/0x1b [<00007f068ea1ed30>] 0x7f068ea1ed30 linux44:~ # cat /proc/1822/stack [] md_do_sync+0x846/0xf40 [md_mod] [] md_thread+0x16d/0x180 [md_mod] [] kthread+0xb4/0xc0 [] ret_from_fork+0x58/0x90 Task1848 Task1822 md_attr_store (held reconfig_mutex by call mddev_lock()) action_store md_reap_sync_thread md_unregister_thread kthread_stop md_wakeup_thread(mddev->thread); wait_event(mddev->sb_wait, !test_bit(MD_CHANGE_PENDING)) md_check_recovery is triggered by wakeup mddev->thread, but it can't clear MD_CHANGE_PENDING flag since it can't get lock which was held by md_attr_store already. To solve the deadlock problem, we move "->resync_finish()" from md_do_sync to md_reap_sync_thread (after md_update_sb), also MD_HELD_RESYNC_LOCK is introduced since it is possible that node can't get resync lock in md_do_sync. Then we do not need to wait for MD_CHANGE_PENDING is cleared or not since metadata should be updated after md_update_sb, so just call resync_finish if MD_HELD_RESYNC_LOCK is set. We also unified the code after skip label, since set PENDING for non-clustered case should be harmless. Reviewed-by: NeilBrown Signed-off-by: Guoqing Jiang Signed-off-by: Shaohua Li --- drivers/md/md.c | 23 +++++++++++------------ drivers/md/md.h | 3 +++ 2 files changed, 14 insertions(+), 12 deletions(-) (limited to 'drivers/md') diff --git a/drivers/md/md.c b/drivers/md/md.c index 866825f10b4c..25d454285ee8 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -7809,6 +7809,7 @@ void md_do_sync(struct md_thread *thread) if (ret) goto skip; + set_bit(MD_CLUSTER_RESYNC_LOCKED, &mddev->flags); if (!(test_bit(MD_RECOVERY_SYNC, &mddev->recovery) || test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) || test_bit(MD_RECOVERY_RECOVER, &mddev->recovery)) @@ -8147,18 +8148,11 @@ void md_do_sync(struct md_thread *thread) } } skip: - if (mddev_is_clustered(mddev) && - ret == 0) { - /* set CHANGE_PENDING here since maybe another - * update is needed, so other nodes are informed */ - set_mask_bits(&mddev->flags, 0, - BIT(MD_CHANGE_PENDING) | BIT(MD_CHANGE_DEVS)); - md_wakeup_thread(mddev->thread); - wait_event(mddev->sb_wait, - !test_bit(MD_CHANGE_PENDING, &mddev->flags)); - md_cluster_ops->resync_finish(mddev); - } else - set_bit(MD_CHANGE_DEVS, &mddev->flags); + /* set CHANGE_PENDING here since maybe another update is needed, + * so other nodes are informed. It should be harmless for normal + * raid */ + set_mask_bits(&mddev->flags, 0, + BIT(MD_CHANGE_PENDING) | BIT(MD_CHANGE_DEVS)); spin_lock(&mddev->lock); if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) { @@ -8502,6 +8496,11 @@ void md_reap_sync_thread(struct mddev *mddev) rdev->saved_raid_disk = -1; md_update_sb(mddev, 1); + /* MD_CHANGE_PENDING should be cleared by md_update_sb, so we can + * call resync_finish here if MD_CLUSTER_RESYNC_LOCKED is set by + * clustered raid */ + if (test_and_clear_bit(MD_CLUSTER_RESYNC_LOCKED, &mddev->flags)) + md_cluster_ops->resync_finish(mddev); clear_bit(MD_RECOVERY_RUNNING, &mddev->recovery); clear_bit(MD_RECOVERY_DONE, &mddev->recovery); clear_bit(MD_RECOVERY_SYNC, &mddev->recovery); diff --git a/drivers/md/md.h b/drivers/md/md.h index b5c4be73e6e4..03b19aad4921 100644 --- a/drivers/md/md.h +++ b/drivers/md/md.h @@ -204,6 +204,9 @@ struct mddev { #define MD_RELOAD_SB 7 /* Reload the superblock because another node * updated it. */ +#define MD_CLUSTER_RESYNC_LOCKED 8 /* cluster raid only, which means node + * already took resync lock, need to + * release the lock */ int suspended; atomic_t active_io; -- cgit v1.2.3 From db76767213be6c6db1b1344621511e27e9984fbb Mon Sep 17 00:00:00 2001 From: Guoqing Jiang Date: Thu, 2 Jun 2016 23:32:05 -0400 Subject: md: simplify the code with md_kick_rdev_from_array Signed-off-by: Guoqing Jiang Signed-off-by: Shaohua Li --- drivers/md/md.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/md') diff --git a/drivers/md/md.c b/drivers/md/md.c index 25d454285ee8..459f1899f383 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -2478,8 +2478,7 @@ static int add_bound_rdev(struct md_rdev *rdev) if (add_journal) mddev_resume(mddev); if (err) { - unbind_rdev_from_array(rdev); - export_rdev(rdev); + md_kick_rdev_from_array(rdev); return err; } } -- cgit v1.2.3 From 5b1f5bc3323ece3726206a46ce64a92ace2c8df8 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Wed, 8 Jun 2016 09:20:16 -0700 Subject: md: use a mutex to protect a global list We saw a list corruption in the list all_detected_devices: WARNING: CPU: 16 PID: 226 at lib/list_debug.c:29 __list_add+0x3c/0xa9() list_add corruption. next->prev should be prev (ffff880859d58320), but was ffff880859ce74c0. (next=ffffffff81abfdb0). Modules linked in: ahci libahci libata sd_mod scsi_mod CPU: 16 PID: 226 Comm: kworker/u241:4 Not tainted 4.1.20 #1 Hardware name: Dell Inc. PowerEdge C6220/04GD66, BIOS 2.2.3 11/07/2013 Workqueue: events_unbound async_run_entry_fn 0000000000000000 ffff880859a5baf8 ffffffff81502872 ffff880859a5bb48 0000000000000009 ffff880859a5bb38 ffffffff810692a5 ffff880859ee8828 ffffffff812ad02c ffff880859d58320 ffffffff81abfdb0 ffff880859eb90c0 Call Trace: [] dump_stack+0x4d/0x63 [] warn_slowpath_common+0xa1/0xbb [] ? __list_add+0x3c/0xa9 [] warn_slowpath_fmt+0x46/0x48 [] __list_add+0x3c/0xa9 [] md_autodetect_dev+0x41/0x62 [] rescan_partitions+0x25f/0x29d [] ? mutex_lock+0x13/0x31 [] __blkdev_get+0x1aa/0x3cd [] blkdev_get+0x5f/0x294 [] ? put_device+0x17/0x19 [] ? disk_put_part+0x12/0x14 [] add_disk+0x29d/0x407 [] ? __pm_runtime_use_autosuspend+0x5c/0x64 [] sd_probe_async+0x115/0x1af [sd_mod] [] async_run_entry_fn+0x72/0x12c [] process_one_work+0x198/0x2ce [] worker_thread+0x1dd/0x2bb [] ? cancel_delayed_work_sync+0x15/0x15 [] ? cancel_delayed_work_sync+0x15/0x15 [] kthread+0xae/0xb6 [] ? param_array_set+0x40/0xfa [] ? __kthread_parkme+0x61/0x61 [] ret_from_fork+0x42/0x70 [] ? __kthread_parkme+0x61/0x61 I suspect it is because there is no lock protecting this global list, autostart_arrays() is called in ioctl() path where there is no lock. Cc: Shaohua Li Signed-off-by: Cong Wang Signed-off-by: Shaohua Li --- drivers/md/md.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/md') diff --git a/drivers/md/md.c b/drivers/md/md.c index 459f1899f383..43728a42fccf 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -8797,6 +8797,7 @@ EXPORT_SYMBOL(md_reload_sb); * at boot time. */ +static DEFINE_MUTEX(detected_devices_mutex); static LIST_HEAD(all_detected_devices); struct detected_devices_node { struct list_head list; @@ -8810,7 +8811,9 @@ void md_autodetect_dev(dev_t dev) node_detected_dev = kzalloc(sizeof(*node_detected_dev), GFP_KERNEL); if (node_detected_dev) { node_detected_dev->dev = dev; + mutex_lock(&detected_devices_mutex); list_add_tail(&node_detected_dev->list, &all_detected_devices); + mutex_unlock(&detected_devices_mutex); } else { printk(KERN_CRIT "md: md_autodetect_dev: kzalloc failed" ", skipping dev(%d,%d)\n", MAJOR(dev), MINOR(dev)); @@ -8829,6 +8832,7 @@ static void autostart_arrays(int part) printk(KERN_INFO "md: Autodetecting RAID arrays.\n"); + mutex_lock(&detected_devices_mutex); while (!list_empty(&all_detected_devices) && i_scanned < INT_MAX) { i_scanned++; node_detected_dev = list_entry(all_detected_devices.next, @@ -8847,6 +8851,7 @@ static void autostart_arrays(int part) list_add(&rdev->same_set, &pending_raid_disks); i_passed++; } + mutex_unlock(&detected_devices_mutex); printk(KERN_INFO "md: Scanned %d and added %d devices.\n", i_scanned, i_passed); -- cgit v1.2.3 From 4ba1e78891e9858a5c773e6ffe4414611019bf42 Mon Sep 17 00:00:00 2001 From: Xiao Ni Date: Sun, 12 Jun 2016 17:18:00 +0800 Subject: MD:Update superblock when err == 0 in size_store This is a simple check before updating the superblock. It should update the superblock when update_size return 0. Signed-off-by: Xiao Ni Signed-off-by: Shaohua Li --- drivers/md/md.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/md') diff --git a/drivers/md/md.c b/drivers/md/md.c index 43728a42fccf..d0c1e79da49e 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -4186,7 +4186,8 @@ size_store(struct mddev *mddev, const char *buf, size_t len) return err; if (mddev->pers) { err = update_size(mddev, sectors); - md_update_sb(mddev, 1); + if (err == 0) + md_update_sb(mddev, 1); } else { if (mddev->dev_sectors == 0 || mddev->dev_sectors > sectors) -- cgit v1.2.3 From 7ac504472263180745ac94242f1d253eb7284e48 Mon Sep 17 00:00:00 2001 From: Tomasz Majchrzak Date: Mon, 13 Jun 2016 15:51:19 +0200 Subject: raid1/raid10: slow down resync if there is non-resync activity pending A performance drop of mkfs has been observed on RAID10 during resync since commit 09314799e4f0 ("md: remove 'go_faster' option from ->sync_request()"). Resync sends so many IOs it slows down non-resync IOs significantly (few times). Add a short delay to a resync. The previous long sleep (1s) has proven unnecessary, even very short delay brings performance right. The change also applied to raid1. The problem has not been observed on raid1, however it shares barriers code with raid10 so it might be an issue for some setup too. Suggested-by: NeilBrown Link: http://lkml.kernel.org/r/20160609134555.GA9104@proton.igk.intel.com Signed-off-by: Tomasz Majchrzak Signed-off-by: Shaohua Li --- drivers/md/raid1.c | 7 +++++++ drivers/md/raid10.c | 7 +++++++ 2 files changed, 14 insertions(+) (limited to 'drivers/md') diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index c7c8cde0ab21..358a08e656f6 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -2535,6 +2535,13 @@ static sector_t raid1_sync_request(struct mddev *mddev, sector_t sector_nr, return sync_blocks; } + /* + * If there is non-resync activity waiting for a turn, then let it + * though before starting on this new sync request. + */ + if (conf->nr_waiting) + schedule_timeout_uninterruptible(1); + /* we are incrementing sector_nr below. To be safe, we check against * sector_nr + two times RESYNC_SECTORS */ diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index c7de2a53e625..3578d3aa9ee3 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -2912,6 +2912,13 @@ static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr, max_sector > (sector_nr | chunk_mask)) max_sector = (sector_nr | chunk_mask) + 1; + /* + * If there is non-resync activity waiting for a turn, then let it + * though before starting on this new sync request. + */ + if (conf->nr_waiting) + schedule_timeout_uninterruptible(1); + /* Again, very different code for resync and recovery. * Both must result in an r10bio with a list of bios that * have bi_end_io, bi_sector, bi_bdev set, -- cgit v1.2.3 From 8430e7e0af9a15063b90343e3beebc164c8e90f3 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 2 Jun 2016 16:19:52 +1000 Subject: md: disconnect device from personality before trying to remove it. When the HOT_REMOVE_DISK ioctl is used to remove a device, we call remove_and_add_spares() which will remove it from the personality if possible. This improves the chances that the removal will succeed. When writing "remove" to dev-XX/state, we don't. So that can fail more easily. So add the remove_and_add_spares() into "remove" handling. Signed-off-by: NeilBrown Signed-off-by: Shaohua Li --- drivers/md/md.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/md') diff --git a/drivers/md/md.c b/drivers/md/md.c index d0c1e79da49e..0793754eeffd 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -2595,6 +2595,8 @@ state_store(struct md_rdev *rdev, const char *buf, size_t len) else err = -EBUSY; } else if (cmd_match(buf, "remove")) { + clear_bit(Blocked, &rdev->flags); + remove_and_add_spares(rdev->mddev, rdev); if (rdev->raid_disk >= 0) err = -EBUSY; else { -- cgit v1.2.3 From 414e6b9a7032a6c2f5ddf018fdb199190b075170 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 2 Jun 2016 16:19:52 +1000 Subject: md/raid1, raid10: don't recheck "Faulty" flag in read-balance. Re-checking the faulty flag here brings no value. The comment about "risk" refers to the risk that the device could be in the process of being removed by ->hot_remove_disk(). However providing that the ->nr_pending count is incremented inside an rcu_read_locked() region, there is no risk of that happening. This is because the rdev pointer (in the personalities array) is set to NULL before synchronize_rcu(), and ->nr_pending is tested afterwards. If the rcu_read_locked region happens before the synchronize_rcu(), the test will see that nr_pending has been incremented. If it happens afterwards, the rdev pointer will be NULL so there is nothing to increment. Signed-off-by: NeilBrown Signed-off-by: Shaohua Li --- drivers/md/raid1.c | 7 ------- drivers/md/raid10.c | 8 -------- 2 files changed, 15 deletions(-) (limited to 'drivers/md') diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 358a08e656f6..f6c3bd4913eb 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -689,13 +689,6 @@ static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sect if (!rdev) goto retry; atomic_inc(&rdev->nr_pending); - if (test_bit(Faulty, &rdev->flags)) { - /* cannot risk returning a device that failed - * before we inc'ed nr_pending - */ - rdev_dec_pending(rdev, conf->mddev); - goto retry; - } sectors = best_good_sectors; if (conf->mirrors[best_disk].next_seq_sect != this_sector) diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 3578d3aa9ee3..ae4dce1cbc42 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -707,7 +707,6 @@ static struct md_rdev *read_balance(struct r10conf *conf, raid10_find_phys(conf, r10_bio); rcu_read_lock(); -retry: sectors = r10_bio->sectors; best_slot = -1; best_rdev = NULL; @@ -804,13 +803,6 @@ retry: if (slot >= 0) { atomic_inc(&rdev->nr_pending); - if (test_bit(Faulty, &rdev->flags)) { - /* Cannot risk returning a device that failed - * before we inc'ed nr_pending - */ - rdev_dec_pending(rdev, conf->mddev); - goto retry; - } r10_bio->read_slot = slot; } else rdev = NULL; -- cgit v1.2.3 From 83f1261f5e5516d7cf58a04b97e4e63e747a9157 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 2 Jun 2016 16:19:52 +1000 Subject: md/raid10: fix refounct imbalance when resyncing an array with a replacement device. If you have a raid10 with a replacement device that is resyncing - e.g. after a crash before the replacement was complete - the write to the replacement will increment nr_pending on the wrong device, which will lead to strangeness. Signed-off-by: NeilBrown Signed-off-by: Shaohua Li --- drivers/md/raid10.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/md') diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index ae4dce1cbc42..6044864feb7b 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -3229,7 +3229,7 @@ static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr, bio->bi_error = -EIO; sector = r10_bio->devs[i].addr; - atomic_inc(&conf->mirrors[d].rdev->nr_pending); + atomic_inc(&conf->mirrors[d].replacement->nr_pending); bio->bi_next = biolist; biolist = bio; bio->bi_private = r10_bio; -- cgit v1.2.3 From d44b0a928fa9925fb453d7acc42a48c79de2c6f7 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 2 Jun 2016 16:19:52 +1000 Subject: md/raid10: add rcu protection in raid10_status. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held raid10_status holds none of these. So add rcu_read_lock() protection. Signed-off-by: NeilBrown Signed-off-by: Shaohua Li --- drivers/md/raid10.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers/md') diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 6044864feb7b..334a701902de 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1495,10 +1495,12 @@ static void raid10_status(struct seq_file *seq, struct mddev *mddev) } seq_printf(seq, " [%d/%d] [", conf->geo.raid_disks, conf->geo.raid_disks - mddev->degraded); - for (i = 0; i < conf->geo.raid_disks; i++) - seq_printf(seq, "%s", - conf->mirrors[i].rdev && - test_bit(In_sync, &conf->mirrors[i].rdev->flags) ? "U" : "_"); + rcu_read_lock(); + for (i = 0; i < conf->geo.raid_disks; i++) { + struct md_rdev *rdev = rcu_dereference(conf->mirrors[i].rdev); + seq_printf(seq, "%s", rdev && test_bit(In_sync, &rdev->flags) ? "U" : "_"); + } + rcu_read_unlock(); seq_printf(seq, "]"); } -- cgit v1.2.3 From f90145f317efad72e6552cecb09ab7a4e5d1e404 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 2 Jun 2016 16:19:52 +1000 Subject: md/raid10: add rcu protection to rdev access in raid10_sync_request. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by: NeilBrown Signed-off-by: Shaohua Li --- drivers/md/raid10.c | 122 +++++++++++++++++++++++++++++++--------------------- 1 file changed, 74 insertions(+), 48 deletions(-) (limited to 'drivers/md') diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 334a701902de..cb997c63bfe0 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -2871,11 +2871,14 @@ static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr, /* Completed a full sync so the replacements * are now fully recovered. */ - for (i = 0; i < conf->geo.raid_disks; i++) - if (conf->mirrors[i].replacement) - conf->mirrors[i].replacement - ->recovery_offset - = MaxSector; + rcu_read_lock(); + for (i = 0; i < conf->geo.raid_disks; i++) { + struct md_rdev *rdev = + rcu_dereference(conf->mirrors[i].replacement); + if (rdev) + rdev->recovery_offset = MaxSector; + } + rcu_read_unlock(); } conf->fullsync = 0; } @@ -2941,14 +2944,19 @@ static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr, int must_sync; int any_working; struct raid10_info *mirror = &conf->mirrors[i]; + struct md_rdev *mrdev, *mreplace; - if ((mirror->rdev == NULL || - test_bit(In_sync, &mirror->rdev->flags)) - && - (mirror->replacement == NULL || - test_bit(Faulty, - &mirror->replacement->flags))) + rcu_read_lock(); + mrdev = rcu_dereference(mirror->rdev); + mreplace = rcu_dereference(mirror->replacement); + + if ((mrdev == NULL || + test_bit(In_sync, &mrdev->flags)) && + (mreplace == NULL || + test_bit(Faulty, &mreplace->flags))) { + rcu_read_unlock(); continue; + } still_degraded = 0; /* want to reconstruct this device */ @@ -2958,6 +2966,7 @@ static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr, /* last stripe is not complete - don't * try to recover this sector. */ + rcu_read_unlock(); continue; } /* Unless we are doing a full sync, or a replacement @@ -2969,14 +2978,19 @@ static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr, if (sync_blocks < max_sync) max_sync = sync_blocks; if (!must_sync && - mirror->replacement == NULL && + mreplace == NULL && !conf->fullsync) { /* yep, skip the sync_blocks here, but don't assume * that there will never be anything to do here */ chunks_skipped = -1; + rcu_read_unlock(); continue; } + atomic_inc(&mrdev->nr_pending); + if (mreplace) + atomic_inc(&mreplace->nr_pending); + rcu_read_unlock(); r10_bio = mempool_alloc(conf->r10buf_pool, GFP_NOIO); r10_bio->state = 0; @@ -2995,12 +3009,15 @@ static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr, /* Need to check if the array will still be * degraded */ - for (j = 0; j < conf->geo.raid_disks; j++) - if (conf->mirrors[j].rdev == NULL || - test_bit(Faulty, &conf->mirrors[j].rdev->flags)) { + rcu_read_lock(); + for (j = 0; j < conf->geo.raid_disks; j++) { + struct md_rdev *rdev = rcu_dereference( + conf->mirrors[j].rdev); + if (rdev == NULL || test_bit(Faulty, &rdev->flags)) { still_degraded = 1; break; } + } must_sync = bitmap_start_sync(mddev->bitmap, sect, &sync_blocks, still_degraded); @@ -3010,15 +3027,15 @@ static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr, int k; int d = r10_bio->devs[j].devnum; sector_t from_addr, to_addr; - struct md_rdev *rdev; + struct md_rdev *rdev = + rcu_dereference(conf->mirrors[d].rdev); sector_t sector, first_bad; int bad_sectors; - if (!conf->mirrors[d].rdev || - !test_bit(In_sync, &conf->mirrors[d].rdev->flags)) + if (!rdev || + !test_bit(In_sync, &rdev->flags)) continue; /* This is where we read from */ any_working = 1; - rdev = conf->mirrors[d].rdev; sector = r10_bio->devs[j].addr; if (is_badblock(rdev, sector, max_sync, @@ -3057,8 +3074,7 @@ static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr, r10_bio->devs[1].devnum = i; r10_bio->devs[1].addr = to_addr; - rdev = mirror->rdev; - if (!test_bit(In_sync, &rdev->flags)) { + if (!test_bit(In_sync, &mrdev->flags)) { bio = r10_bio->devs[1].bio; bio_reset(bio); bio->bi_next = biolist; @@ -3067,8 +3083,8 @@ static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr, bio->bi_end_io = end_sync_write; bio->bi_rw = WRITE; bio->bi_iter.bi_sector = to_addr - + rdev->data_offset; - bio->bi_bdev = rdev->bdev; + + mrdev->data_offset; + bio->bi_bdev = mrdev->bdev; atomic_inc(&r10_bio->remaining); } else r10_bio->devs[1].bio->bi_end_io = NULL; @@ -3077,8 +3093,7 @@ static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr, bio = r10_bio->devs[1].repl_bio; if (bio) bio->bi_end_io = NULL; - rdev = mirror->replacement; - /* Note: if rdev != NULL, then bio + /* Note: if mreplace != NULL, then bio * cannot be NULL as r10buf_pool_alloc will * have allocated it. * So the second test here is pointless. @@ -3086,8 +3101,8 @@ static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr, * this comment keeps human reviewers * happy. */ - if (rdev == NULL || bio == NULL || - test_bit(Faulty, &rdev->flags)) + if (mreplace == NULL || bio == NULL || + test_bit(Faulty, &mreplace->flags)) break; bio_reset(bio); bio->bi_next = biolist; @@ -3096,11 +3111,12 @@ static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr, bio->bi_end_io = end_sync_write; bio->bi_rw = WRITE; bio->bi_iter.bi_sector = to_addr + - rdev->data_offset; - bio->bi_bdev = rdev->bdev; + mreplace->data_offset; + bio->bi_bdev = mreplace->bdev; atomic_inc(&r10_bio->remaining); break; } + rcu_read_unlock(); if (j == conf->copies) { /* Cannot recover, so abort the recovery or * record a bad block */ @@ -3113,15 +3129,15 @@ static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr, if (r10_bio->devs[k].devnum == i) break; if (!test_bit(In_sync, - &mirror->rdev->flags) + &mrdev->flags) && !rdev_set_badblocks( - mirror->rdev, + mrdev, r10_bio->devs[k].addr, max_sync, 0)) any_working = 0; - if (mirror->replacement && + if (mreplace && !rdev_set_badblocks( - mirror->replacement, + mreplace, r10_bio->devs[k].addr, max_sync, 0)) any_working = 0; @@ -3139,8 +3155,14 @@ static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr, if (rb2) atomic_dec(&rb2->remaining); r10_bio = rb2; + rdev_dec_pending(mrdev, mddev); + if (mreplace) + rdev_dec_pending(mreplace, mddev); break; } + rdev_dec_pending(mrdev, mddev); + if (mreplace) + rdev_dec_pending(mreplace, mddev); } if (biolist == NULL) { while (r10_bio) { @@ -3185,6 +3207,7 @@ static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr, int d = r10_bio->devs[i].devnum; sector_t first_bad, sector; int bad_sectors; + struct md_rdev *rdev; if (r10_bio->devs[i].repl_bio) r10_bio->devs[i].repl_bio->bi_end_io = NULL; @@ -3192,12 +3215,14 @@ static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr, bio = r10_bio->devs[i].bio; bio_reset(bio); bio->bi_error = -EIO; - if (conf->mirrors[d].rdev == NULL || - test_bit(Faulty, &conf->mirrors[d].rdev->flags)) + rcu_read_lock(); + rdev = rcu_dereference(conf->mirrors[d].rdev); + if (rdev == NULL || test_bit(Faulty, &rdev->flags)) { + rcu_read_unlock(); continue; + } sector = r10_bio->devs[i].addr; - if (is_badblock(conf->mirrors[d].rdev, - sector, max_sync, + if (is_badblock(rdev, sector, max_sync, &first_bad, &bad_sectors)) { if (first_bad > sector) max_sync = first_bad - sector; @@ -3205,25 +3230,28 @@ static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr, bad_sectors -= (sector - first_bad); if (max_sync > bad_sectors) max_sync = bad_sectors; + rcu_read_unlock(); continue; } } - atomic_inc(&conf->mirrors[d].rdev->nr_pending); + atomic_inc(&rdev->nr_pending); atomic_inc(&r10_bio->remaining); bio->bi_next = biolist; biolist = bio; bio->bi_private = r10_bio; bio->bi_end_io = end_sync_read; bio->bi_rw = READ; - bio->bi_iter.bi_sector = sector + - conf->mirrors[d].rdev->data_offset; - bio->bi_bdev = conf->mirrors[d].rdev->bdev; + bio->bi_iter.bi_sector = sector + rdev->data_offset; + bio->bi_bdev = rdev->bdev; count++; - if (conf->mirrors[d].replacement == NULL || - test_bit(Faulty, - &conf->mirrors[d].replacement->flags)) + rdev = rcu_dereference(conf->mirrors[d].replacement); + if (rdev == NULL || test_bit(Faulty, &rdev->flags)) { + rcu_read_unlock(); continue; + } + atomic_inc(&rdev->nr_pending); + rcu_read_unlock(); /* Need to set up for writing to the replacement */ bio = r10_bio->devs[i].repl_bio; @@ -3231,15 +3259,13 @@ static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr, bio->bi_error = -EIO; sector = r10_bio->devs[i].addr; - atomic_inc(&conf->mirrors[d].replacement->nr_pending); bio->bi_next = biolist; biolist = bio; bio->bi_private = r10_bio; bio->bi_end_io = end_sync_write; bio->bi_rw = WRITE; - bio->bi_iter.bi_sector = sector + - conf->mirrors[d].replacement->data_offset; - bio->bi_bdev = conf->mirrors[d].replacement->bdev; + bio->bi_iter.bi_sector = sector + rdev->data_offset; + bio->bi_bdev = rdev->bdev; count++; } -- cgit v1.2.3 From d094d6860b6678057f70dee27121ea4860c55e06 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 2 Jun 2016 16:19:52 +1000 Subject: md/raid10: add rcu protection to rdev access during reshape. mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Reshape isn't always suitably careful as in the past rdev couldn't be removed during reshape. It can now, so add protection. Signed-off-by: NeilBrown Signed-off-by: Shaohua Li --- drivers/md/raid10.c | 30 ++++++++++++++++++++++-------- 1 file changed, 22 insertions(+), 8 deletions(-) (limited to 'drivers/md') diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index cb997c63bfe0..e644f6f5c4a7 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -4361,15 +4361,16 @@ read_more: blist = read_bio; read_bio->bi_next = NULL; + rcu_read_lock(); for (s = 0; s < conf->copies*2; s++) { struct bio *b; int d = r10_bio->devs[s/2].devnum; struct md_rdev *rdev2; if (s&1) { - rdev2 = conf->mirrors[d].replacement; + rdev2 = rcu_dereference(conf->mirrors[d].replacement); b = r10_bio->devs[s/2].repl_bio; } else { - rdev2 = conf->mirrors[d].rdev; + rdev2 = rcu_dereference(conf->mirrors[d].rdev); b = r10_bio->devs[s/2].bio; } if (!rdev2 || test_bit(Faulty, &rdev2->flags)) @@ -4414,6 +4415,7 @@ read_more: nr_sectors += len >> 9; } bio_full: + rcu_read_unlock(); r10_bio->sectors = nr_sectors; /* Now submit the read */ @@ -4465,16 +4467,20 @@ static void reshape_request_write(struct mddev *mddev, struct r10bio *r10_bio) struct bio *b; int d = r10_bio->devs[s/2].devnum; struct md_rdev *rdev; + rcu_read_lock(); if (s&1) { - rdev = conf->mirrors[d].replacement; + rdev = rcu_dereference(conf->mirrors[d].replacement); b = r10_bio->devs[s/2].repl_bio; } else { - rdev = conf->mirrors[d].rdev; + rdev = rcu_dereference(conf->mirrors[d].rdev); b = r10_bio->devs[s/2].bio; } - if (!rdev || test_bit(Faulty, &rdev->flags)) + if (!rdev || test_bit(Faulty, &rdev->flags)) { + rcu_read_unlock(); continue; + } atomic_inc(&rdev->nr_pending); + rcu_read_unlock(); md_sync_acct(b->bi_bdev, r10_bio->sectors); atomic_inc(&r10_bio->remaining); b->bi_next = NULL; @@ -4535,9 +4541,10 @@ static int handle_reshape_read_error(struct mddev *mddev, if (s > (PAGE_SIZE >> 9)) s = PAGE_SIZE >> 9; + rcu_read_lock(); while (!success) { int d = r10b->devs[slot].devnum; - struct md_rdev *rdev = conf->mirrors[d].rdev; + struct md_rdev *rdev = rcu_dereference(conf->mirrors[d].rdev); sector_t addr; if (rdev == NULL || test_bit(Faulty, &rdev->flags) || @@ -4545,11 +4552,15 @@ static int handle_reshape_read_error(struct mddev *mddev, goto failed; addr = r10b->devs[slot].addr + idx * PAGE_SIZE; + atomic_inc(&rdev->nr_pending); + rcu_read_unlock(); success = sync_page_io(rdev, addr, s << 9, bvec[idx].bv_page, READ, false); + rdev_dec_pending(rdev, mddev); + rcu_read_lock(); if (success) break; failed: @@ -4559,6 +4570,7 @@ static int handle_reshape_read_error(struct mddev *mddev, if (slot == first_slot) break; } + rcu_read_unlock(); if (!success) { /* couldn't read this block, must give up */ set_bit(MD_RECOVERY_INTR, @@ -4628,16 +4640,18 @@ static void raid10_finish_reshape(struct mddev *mddev) } } else { int d; + rcu_read_lock(); for (d = conf->geo.raid_disks ; d < conf->geo.raid_disks - mddev->delta_disks; d++) { - struct md_rdev *rdev = conf->mirrors[d].rdev; + struct md_rdev *rdev = rcu_dereference(conf->mirrors[d].rdev); if (rdev) clear_bit(In_sync, &rdev->flags); - rdev = conf->mirrors[d].replacement; + rdev = rcu_dereference(conf->mirrors[d].replacement); if (rdev) clear_bit(In_sync, &rdev->flags); } + rcu_read_unlock(); } mddev->layout = mddev->new_layout; mddev->chunk_sectors = 1 << conf->geo.chunk_shift; -- cgit v1.2.3 From d683c8e0f728f4b4e85f21d5fa7e452f3d3f5fb1 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 2 Jun 2016 16:19:52 +1000 Subject: md/raid10: minor code improvement in fix_read_error() rdev already holds conf->mirrors[d].rdev, so no need to load it again. Signed-off-by: NeilBrown Signed-off-by: Shaohua Li --- drivers/md/raid10.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/md') diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index e644f6f5c4a7..7a8bfe2196c9 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -2262,7 +2262,7 @@ static void fix_read_error(struct r10conf *conf, struct mddev *mddev, struct r10 printk(KERN_NOTICE "md/raid10:%s: %s: Failing raid device\n", mdname(mddev), b); - md_error(mddev, conf->mirrors[d].rdev); + md_error(mddev, rdev); r10_bio->devs[r10_bio->read_slot].bio = IO_BLOCKED; return; } -- cgit v1.2.3 From 4056ca51a2ed2eb22fd2fa9b0400b1dcaf78a6b5 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 2 Jun 2016 16:19:52 +1000 Subject: md/raid10: simplify print_conf a little. 'tmp' is only ever used to extract 'tmp->rdev', so just use 'rdev' directly. Signed-off-by: NeilBrown Signed-off-by: Shaohua Li --- drivers/md/raid10.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers/md') diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 7a8bfe2196c9..526c1d82246e 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1598,7 +1598,7 @@ static void raid10_error(struct mddev *mddev, struct md_rdev *rdev) static void print_conf(struct r10conf *conf) { int i; - struct raid10_info *tmp; + struct md_rdev *rdev; printk(KERN_DEBUG "RAID10 conf printout:\n"); if (!conf) { @@ -1608,14 +1608,16 @@ static void print_conf(struct r10conf *conf) printk(KERN_DEBUG " --- wd:%d rd:%d\n", conf->geo.raid_disks - conf->mddev->degraded, conf->geo.raid_disks); + /* This is only called with ->reconfix_mutex held, so + * rcu protection of rdev is not needed */ for (i = 0; i < conf->geo.raid_disks; i++) { char b[BDEVNAME_SIZE]; - tmp = conf->mirrors + i; - if (tmp->rdev) + rdev = conf->mirrors[i].rdev; + if (rdev) printk(KERN_DEBUG " disk %d, wo:%d, o:%d, dev:%s\n", - i, !test_bit(In_sync, &tmp->rdev->flags), - !test_bit(Faulty, &tmp->rdev->flags), - bdevname(tmp->rdev->bdev,b)); + i, !test_bit(In_sync, &rdev->flags), + !test_bit(Faulty, &rdev->flags), + bdevname(rdev->bdev,b)); } } -- cgit v1.2.3 From e5872d58f5ad179fc03267f12257bee4159aace6 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 2 Jun 2016 16:19:52 +1000 Subject: md/raid1: small cleanup in raid1_end_read/write_request Both functions use conf->mirrors[mirror].rdev several times, so improve readability by storing this in a local variable. Signed-off-by: NeilBrown Signed-off-by: Shaohua Li --- drivers/md/raid1.c | 35 +++++++++++++++-------------------- 1 file changed, 15 insertions(+), 20 deletions(-) (limited to 'drivers/md') diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index f6c3bd4913eb..588608dcb780 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -319,14 +319,13 @@ static void raid1_end_read_request(struct bio *bio) { int uptodate = !bio->bi_error; struct r1bio *r1_bio = bio->bi_private; - int mirror; struct r1conf *conf = r1_bio->mddev->private; + struct md_rdev *rdev = conf->mirrors[r1_bio->read_disk].rdev; - mirror = r1_bio->read_disk; /* * this branch is our 'one mirror IO has finished' event handler: */ - update_head_pos(mirror, r1_bio); + update_head_pos(r1_bio->read_disk, r1_bio); if (uptodate) set_bit(R1BIO_Uptodate, &r1_bio->state); @@ -339,14 +338,14 @@ static void raid1_end_read_request(struct bio *bio) spin_lock_irqsave(&conf->device_lock, flags); if (r1_bio->mddev->degraded == conf->raid_disks || (r1_bio->mddev->degraded == conf->raid_disks-1 && - test_bit(In_sync, &conf->mirrors[mirror].rdev->flags))) + test_bit(In_sync, &rdev->flags))) uptodate = 1; spin_unlock_irqrestore(&conf->device_lock, flags); } if (uptodate) { raid_end_bio_io(r1_bio); - rdev_dec_pending(conf->mirrors[mirror].rdev, conf->mddev); + rdev_dec_pending(rdev, conf->mddev); } else { /* * oops, read error: @@ -356,7 +355,7 @@ static void raid1_end_read_request(struct bio *bio) KERN_ERR "md/raid1:%s: %s: " "rescheduling sector %llu\n", mdname(conf->mddev), - bdevname(conf->mirrors[mirror].rdev->bdev, + bdevname(rdev->bdev, b), (unsigned long long)r1_bio->sector); set_bit(R1BIO_ReadError, &r1_bio->state); @@ -403,20 +402,18 @@ static void r1_bio_write_done(struct r1bio *r1_bio) static void raid1_end_write_request(struct bio *bio) { struct r1bio *r1_bio = bio->bi_private; - int mirror, behind = test_bit(R1BIO_BehindIO, &r1_bio->state); + int behind = test_bit(R1BIO_BehindIO, &r1_bio->state); struct r1conf *conf = r1_bio->mddev->private; struct bio *to_put = NULL; - - mirror = find_bio_disk(r1_bio, bio); + int mirror = find_bio_disk(r1_bio, bio); + struct md_rdev *rdev = conf->mirrors[mirror].rdev; /* * 'one mirror IO has finished' event handler: */ if (bio->bi_error) { - set_bit(WriteErrorSeen, - &conf->mirrors[mirror].rdev->flags); - if (!test_and_set_bit(WantReplacement, - &conf->mirrors[mirror].rdev->flags)) + set_bit(WriteErrorSeen, &rdev->flags); + if (!test_and_set_bit(WantReplacement, &rdev->flags)) set_bit(MD_RECOVERY_NEEDED, & conf->mddev->recovery); @@ -445,13 +442,12 @@ static void raid1_end_write_request(struct bio *bio) * before rdev->recovery_offset, but for simplicity we don't * check this here. */ - if (test_bit(In_sync, &conf->mirrors[mirror].rdev->flags) && - !test_bit(Faulty, &conf->mirrors[mirror].rdev->flags)) + if (test_bit(In_sync, &rdev->flags) && + !test_bit(Faulty, &rdev->flags)) set_bit(R1BIO_Uptodate, &r1_bio->state); /* Maybe we can clear some bad blocks. */ - if (is_badblock(conf->mirrors[mirror].rdev, - r1_bio->sector, r1_bio->sectors, + if (is_badblock(rdev, r1_bio->sector, r1_bio->sectors, &first_bad, &bad_sectors)) { r1_bio->bios[mirror] = IO_MADE_GOOD; set_bit(R1BIO_MadeGood, &r1_bio->state); @@ -459,7 +455,7 @@ static void raid1_end_write_request(struct bio *bio) } if (behind) { - if (test_bit(WriteMostly, &conf->mirrors[mirror].rdev->flags)) + if (test_bit(WriteMostly, &rdev->flags)) atomic_dec(&r1_bio->behind_remaining); /* @@ -483,8 +479,7 @@ static void raid1_end_write_request(struct bio *bio) } } if (r1_bio->bios[mirror] == NULL) - rdev_dec_pending(conf->mirrors[mirror].rdev, - conf->mddev); + rdev_dec_pending(rdev, conf->mddev); /* * Let's see if all mirrored write operations have finished -- cgit v1.2.3 From 854abd75841413f7966bc4fed83b36e78a1c285c Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 2 Jun 2016 16:19:52 +1000 Subject: md/raid1: small code cleanup in end_sync_write 'mirror' is only used to find 'rdev', several times. So just find 'rdev' once, and use it instead. Signed-off-by: NeilBrown Signed-off-by: Shaohua Li --- drivers/md/raid1.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) (limited to 'drivers/md') diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 588608dcb780..60c293df03f1 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1709,11 +1709,9 @@ static void end_sync_write(struct bio *bio) struct r1bio *r1_bio = bio->bi_private; struct mddev *mddev = r1_bio->mddev; struct r1conf *conf = mddev->private; - int mirror=0; sector_t first_bad; int bad_sectors; - - mirror = find_bio_disk(r1_bio, bio); + struct md_rdev *rdev = conf->mirrors[find_bio_disk(r1_bio, bio)].rdev; if (!uptodate) { sector_t sync_blocks = 0; @@ -1726,16 +1724,12 @@ static void end_sync_write(struct bio *bio) s += sync_blocks; sectors_to_go -= sync_blocks; } while (sectors_to_go > 0); - set_bit(WriteErrorSeen, - &conf->mirrors[mirror].rdev->flags); - if (!test_and_set_bit(WantReplacement, - &conf->mirrors[mirror].rdev->flags)) + set_bit(WriteErrorSeen, &rdev->flags); + if (!test_and_set_bit(WantReplacement, &rdev->flags)) set_bit(MD_RECOVERY_NEEDED, & mddev->recovery); set_bit(R1BIO_WriteError, &r1_bio->state); - } else if (is_badblock(conf->mirrors[mirror].rdev, - r1_bio->sector, - r1_bio->sectors, + } else if (is_badblock(rdev, r1_bio->sector, r1_bio->sectors, &first_bad, &bad_sectors) && !is_badblock(conf->mirrors[r1_bio->read_disk].rdev, r1_bio->sector, -- cgit v1.2.3 From 707a6a420ccf31634f2b15d8f06f09536e2de079 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 2 Jun 2016 16:19:52 +1000 Subject: md/raid1: add rcu protection to rdev in fix_read_error Since remove_and_add_spares() was added to hot_remove_disk() it has been possible for an rdev to be hot-removed while fix_read_error() was running, so we need to be more careful, and take a reference to the rdev while performing IO. Signed-off-by: NeilBrown Signed-off-by: Shaohua Li --- drivers/md/raid1.c | 52 ++++++++++++++++++++++++++++++++-------------------- 1 file changed, 32 insertions(+), 20 deletions(-) (limited to 'drivers/md') diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 60c293df03f1..34f20c03d1f6 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -2056,29 +2056,30 @@ static void fix_read_error(struct r1conf *conf, int read_disk, s = PAGE_SIZE >> 9; do { - /* Note: no rcu protection needed here - * as this is synchronous in the raid1d thread - * which is the thread that might remove - * a device. If raid1d ever becomes multi-threaded.... - */ sector_t first_bad; int bad_sectors; - rdev = conf->mirrors[d].rdev; + rcu_read_lock(); + rdev = rcu_dereference(conf->mirrors[d].rdev); if (rdev && (test_bit(In_sync, &rdev->flags) || (!test_bit(Faulty, &rdev->flags) && rdev->recovery_offset >= sect + s)) && is_badblock(rdev, sect, s, - &first_bad, &bad_sectors) == 0 && - sync_page_io(rdev, sect, s<<9, - conf->tmppage, READ, false)) - success = 1; - else { - d++; - if (d == conf->raid_disks * 2) - d = 0; - } + &first_bad, &bad_sectors) == 0) { + atomic_inc(&rdev->nr_pending); + rcu_read_unlock(); + if (sync_page_io(rdev, sect, s<<9, + conf->tmppage, READ, false)) + success = 1; + rdev_dec_pending(rdev, mddev); + if (success) + break; + } else + rcu_read_unlock(); + d++; + if (d == conf->raid_disks * 2) + d = 0; } while (!success && d != read_disk); if (!success) { @@ -2094,11 +2095,17 @@ static void fix_read_error(struct r1conf *conf, int read_disk, if (d==0) d = conf->raid_disks * 2; d--; - rdev = conf->mirrors[d].rdev; + rcu_read_lock(); + rdev = rcu_dereference(conf->mirrors[d].rdev); if (rdev && - !test_bit(Faulty, &rdev->flags)) + !test_bit(Faulty, &rdev->flags)) { + atomic_inc(&rdev->nr_pending); + rcu_read_unlock(); r1_sync_page_io(rdev, sect, s, conf->tmppage, WRITE); + rdev_dec_pending(rdev, mddev); + } else + rcu_read_unlock(); } d = start; while (d != read_disk) { @@ -2106,9 +2113,12 @@ static void fix_read_error(struct r1conf *conf, int read_disk, if (d==0) d = conf->raid_disks * 2; d--; - rdev = conf->mirrors[d].rdev; + rcu_read_lock(); + rdev = rcu_dereference(conf->mirrors[d].rdev); if (rdev && !test_bit(Faulty, &rdev->flags)) { + atomic_inc(&rdev->nr_pending); + rcu_read_unlock(); if (r1_sync_page_io(rdev, sect, s, conf->tmppage, READ)) { atomic_add(s, &rdev->corrected_errors); @@ -2117,10 +2127,12 @@ static void fix_read_error(struct r1conf *conf, int read_disk, "(%d sectors at %llu on %s)\n", mdname(mddev), s, (unsigned long long)(sect + - rdev->data_offset), + rdev->data_offset), bdevname(rdev->bdev, b)); } - } + rdev_dec_pending(rdev, mddev); + } else + rcu_read_unlock(); } sectors -= s; sect += s; -- cgit v1.2.3 From e50d3992328320acf2454c1e7301a094cd90aebc Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 2 Jun 2016 16:19:52 +1000 Subject: md/raid5: add rcu protection to rdev accesses in handle_failed_sync. The rdev could be freed while handle_failed_sync is running, so rcu protection is needed. Signed-off-by: NeilBrown Signed-off-by: Shaohua Li --- drivers/md/raid5.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/md') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index ad9e15a3ef51..e56c7e0627fa 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3210,15 +3210,16 @@ handle_failed_sync(struct r5conf *conf, struct stripe_head *sh, /* During recovery devices cannot be removed, so * locking and refcounting of rdevs is not needed */ + rcu_read_lock(); for (i = 0; i < conf->raid_disks; i++) { - struct md_rdev *rdev = conf->disks[i].rdev; + struct md_rdev *rdev = rcu_dereference(conf->disks[i].rdev); if (rdev && !test_bit(Faulty, &rdev->flags) && !test_bit(In_sync, &rdev->flags) && !rdev_set_badblocks(rdev, sh->sector, STRIPE_SECTORS, 0)) abort = 1; - rdev = conf->disks[i].replacement; + rdev = rcu_dereference(conf->disks[i].replacement); if (rdev && !test_bit(Faulty, &rdev->flags) && !test_bit(In_sync, &rdev->flags) @@ -3226,6 +3227,7 @@ handle_failed_sync(struct r5conf *conf, struct stripe_head *sh, STRIPE_SECTORS, 0)) abort = 1; } + rcu_read_unlock(); if (abort) conf->recovery_disabled = conf->mddev->recovery_disabled; -- cgit v1.2.3 From 3f232d6a95fc0fe539e0855ee7f3854b03c8104e Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 2 Jun 2016 16:19:52 +1000 Subject: md/raid5: add rcu protection to rdev accesses in want_replace Being in the middle of resync is no longer protection against failed rdevs disappearing. So add rcu protection. Signed-off-by: NeilBrown Signed-off-by: Shaohua Li --- drivers/md/raid5.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/md') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index e56c7e0627fa..198b2a9eef98 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3239,15 +3239,16 @@ static int want_replace(struct stripe_head *sh, int disk_idx) { struct md_rdev *rdev; int rv = 0; - /* Doing recovery so rcu locking not required */ - rdev = sh->raid_conf->disks[disk_idx].replacement; + + rcu_read_lock(); + rdev = rcu_dereference(sh->raid_conf->disks[disk_idx].replacement); if (rdev && !test_bit(Faulty, &rdev->flags) && !test_bit(In_sync, &rdev->flags) && (rdev->recovery_offset <= sh->sector || rdev->mddev->recovery_cp <= sh->sector)) rv = 1; - + rcu_read_unlock(); return rv; } -- cgit v1.2.3 From 5fd133511d5f2a9167573d100e14fddd9c621581 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 2 Jun 2016 16:19:52 +1000 Subject: md/raid5: add rcu protection to rdev accesses in raid5_status. Signed-off-by: NeilBrown Signed-off-by: Shaohua Li --- drivers/md/raid5.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers/md') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 198b2a9eef98..c07b22e8d946 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -7069,10 +7069,12 @@ static void raid5_status(struct seq_file *seq, struct mddev *mddev) seq_printf(seq, " level %d, %dk chunk, algorithm %d", mddev->level, conf->chunk_sectors / 2, mddev->layout); seq_printf (seq, " [%d/%d] [", conf->raid_disks, conf->raid_disks - mddev->degraded); - for (i = 0; i < conf->raid_disks; i++) - seq_printf (seq, "%s", - conf->disks[i].rdev && - test_bit(In_sync, &conf->disks[i].rdev->flags) ? "U" : "_"); + rcu_read_lock(); + for (i = 0; i < conf->raid_disks; i++) { + struct md_rdev *rdev = rcu_dereference(conf->disks[i].rdev); + seq_printf (seq, "%s", rdev && test_bit(In_sync, &rdev->flags) ? "U" : "_"); + } + rcu_read_unlock(); seq_printf (seq, "]"); } -- cgit v1.2.3 From 40cf2123c57928c3ec0626c49bef97ebdbce008e Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 2 Jun 2016 16:19:52 +1000 Subject: md/multipath: add rcu protection to rdev access in multipath_status. Signed-off-by: NeilBrown Signed-off-by: Shaohua Li --- drivers/md/multipath.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers/md') diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c index dd483bb2e111..69244de2036b 100644 --- a/drivers/md/multipath.c +++ b/drivers/md/multipath.c @@ -141,17 +141,19 @@ static void multipath_make_request(struct mddev *mddev, struct bio * bio) return; } -static void multipath_status (struct seq_file *seq, struct mddev *mddev) +static void multipath_status(struct seq_file *seq, struct mddev *mddev) { struct mpconf *conf = mddev->private; int i; seq_printf (seq, " [%d/%d] [", conf->raid_disks, conf->raid_disks - mddev->degraded); - for (i = 0; i < conf->raid_disks; i++) - seq_printf (seq, "%s", - conf->multipaths[i].rdev && - test_bit(In_sync, &conf->multipaths[i].rdev->flags) ? "U" : "_"); + rcu_read_lock(); + for (i = 0; i < conf->raid_disks; i++) { + struct md_rdev *rdev = rcu_dereference(conf->multipaths[i].rdev); + seq_printf (seq, "%s", rdev && test_bit(In_sync, &rdev->flags) ? "U" : "_"); + } + rcu_read_unlock(); seq_printf (seq, "]"); } -- cgit v1.2.3 From f5b67ae86ee317db20c0e10d54f16a0bbbd3207d Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 2 Jun 2016 16:19:53 +1000 Subject: md: be extra careful not to take a reference to a Faulty device. It is important that we never increment rdev->nr_pending on a Faulty device as ->hot_remove_disk() assumes that once the Faulty flag is visible no code will take a new reference. Some places take a new reference after only check In_sync. This should be safe as the two are changed together. However to make the code more obviously safe, add checks for 'Faulty' as well. Note: the actual rule is: Never increment nr_pending if Faulty is set and Blocked is clear, never clear Faulty, and never set Blocked without holding a reference through nr_pending. fix build error (Shaohua) Signed-off-by: NeilBrown Signed-off-by: Shaohua Li --- drivers/md/multipath.c | 3 ++- drivers/md/raid10.c | 6 ++++++ drivers/md/raid5.c | 3 ++- 3 files changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers/md') diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c index 69244de2036b..7eb9972a37e6 100644 --- a/drivers/md/multipath.c +++ b/drivers/md/multipath.c @@ -43,7 +43,8 @@ static int multipath_map (struct mpconf *conf) rcu_read_lock(); for (i = 0; i < disks; i++) { struct md_rdev *rdev = rcu_dereference(conf->multipaths[i].rdev); - if (rdev && test_bit(In_sync, &rdev->flags)) { + if (rdev && test_bit(In_sync, &rdev->flags) && + !test_bit(Faulty, &rdev->flags)) { atomic_inc(&rdev->nr_pending); rcu_read_unlock(); return i; diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 526c1d82246e..34facda18e72 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -2287,6 +2287,7 @@ static void fix_read_error(struct r10conf *conf, struct mddev *mddev, struct r10 rdev = rcu_dereference(conf->mirrors[d].rdev); if (rdev && test_bit(In_sync, &rdev->flags) && + !test_bit(Faulty, &rdev->flags) && is_badblock(rdev, r10_bio->devs[sl].addr + sect, s, &first_bad, &bad_sectors) == 0) { atomic_inc(&rdev->nr_pending); @@ -2339,6 +2340,7 @@ static void fix_read_error(struct r10conf *conf, struct mddev *mddev, struct r10 d = r10_bio->devs[sl].devnum; rdev = rcu_dereference(conf->mirrors[d].rdev); if (!rdev || + test_bit(Faulty, &rdev->flags) || !test_bit(In_sync, &rdev->flags)) continue; @@ -2378,6 +2380,7 @@ static void fix_read_error(struct r10conf *conf, struct mddev *mddev, struct r10 d = r10_bio->devs[sl].devnum; rdev = rcu_dereference(conf->mirrors[d].rdev); if (!rdev || + test_bit(Faulty, &rdev->flags) || !test_bit(In_sync, &rdev->flags)) continue; @@ -2953,6 +2956,7 @@ static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr, mreplace = rcu_dereference(mirror->replacement); if ((mrdev == NULL || + test_bit(Faulty, &mrdev->flags) || test_bit(In_sync, &mrdev->flags)) && (mreplace == NULL || test_bit(Faulty, &mreplace->flags))) { @@ -2971,6 +2975,8 @@ static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr, rcu_read_unlock(); continue; } + if (mreplace && test_bit(Faulty, &mreplace->flags)) + mreplace = NULL; /* Unless we are doing a full sync, or a replacement * we only need to recover the block if it is set in * the bitmap diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index c07b22e8d946..f6a191aaaa91 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3080,7 +3080,8 @@ handle_failed_stripe(struct r5conf *conf, struct stripe_head *sh, struct md_rdev *rdev; rcu_read_lock(); rdev = rcu_dereference(conf->disks[i].rdev); - if (rdev && test_bit(In_sync, &rdev->flags)) + if (rdev && test_bit(In_sync, &rdev->flags) && + !test_bit(Faulty, &rdev->flags)) atomic_inc(&rdev->nr_pending); else rdev = NULL; -- cgit v1.2.3 From d787be4092e27728cb4c012bee9762098ef3c662 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 2 Jun 2016 16:19:53 +1000 Subject: md: reduce the number of synchronize_rcu() calls when multiple devices fail. Every time a device is removed with ->hot_remove_disk() a synchronize_rcu() call is made which can delay several milliseconds in some case. If lots of devices fail at once - as could happen with a large RAID10 where one set of devices are removed all at once - these delays can add up to be very inconcenient. As failure is not reversible we can check for that first, setting a separate flag if it is found, and then all synchronize_rcu() once for all the flagged devices. Then ->hot_remove_disk() function can skip the synchronize_rcu() step if the flag is set. fix build error(Shaohua) Signed-off-by: NeilBrown Signed-off-by: Shaohua Li --- drivers/md/md.c | 29 ++++++++++++++++++++++++++--- drivers/md/md.h | 5 +++++ drivers/md/multipath.c | 14 ++++++++------ drivers/md/raid1.c | 17 ++++++++++------- drivers/md/raid10.c | 19 +++++++++++-------- drivers/md/raid5.c | 15 +++++++++------ 6 files changed, 69 insertions(+), 30 deletions(-) (limited to 'drivers/md') diff --git a/drivers/md/md.c b/drivers/md/md.c index 0793754eeffd..2ed547f5c3b6 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -8180,15 +8180,34 @@ static int remove_and_add_spares(struct mddev *mddev, struct md_rdev *rdev; int spares = 0; int removed = 0; + bool remove_some = false; - rdev_for_each(rdev, mddev) + rdev_for_each(rdev, mddev) { + if ((this == NULL || rdev == this) && + rdev->raid_disk >= 0 && + !test_bit(Blocked, &rdev->flags) && + test_bit(Faulty, &rdev->flags) && + atomic_read(&rdev->nr_pending)==0) { + /* Faulty non-Blocked devices with nr_pending == 0 + * never get nr_pending incremented, + * never get Faulty cleared, and never get Blocked set. + * So we can synchronize_rcu now rather than once per device + */ + remove_some = true; + set_bit(RemoveSynchronized, &rdev->flags); + } + } + + if (remove_some) + synchronize_rcu(); + rdev_for_each(rdev, mddev) { if ((this == NULL || rdev == this) && rdev->raid_disk >= 0 && !test_bit(Blocked, &rdev->flags) && - (test_bit(Faulty, &rdev->flags) || + ((test_bit(RemoveSynchronized, &rdev->flags) || (!test_bit(In_sync, &rdev->flags) && !test_bit(Journal, &rdev->flags))) && - atomic_read(&rdev->nr_pending)==0) { + atomic_read(&rdev->nr_pending)==0)) { if (mddev->pers->hot_remove_disk( mddev, rdev) == 0) { sysfs_unlink_rdev(mddev, rdev); @@ -8196,6 +8215,10 @@ static int remove_and_add_spares(struct mddev *mddev, removed++; } } + if (remove_some && test_bit(RemoveSynchronized, &rdev->flags)) + clear_bit(RemoveSynchronized, &rdev->flags); + } + if (removed && mddev->kobj.sd) sysfs_notify(&mddev->kobj, NULL, "degraded"); diff --git a/drivers/md/md.h b/drivers/md/md.h index 03b19aad4921..dc65ca65b26e 100644 --- a/drivers/md/md.h +++ b/drivers/md/md.h @@ -163,6 +163,11 @@ enum flag_bits { * than other devices in the array */ ClusterRemove, + RemoveSynchronized, /* synchronize_rcu() was called after + * this device was known to be faulty, + * so it is safe to remove without + * another synchronize_rcu() call. + */ }; static inline int is_badblock(struct md_rdev *rdev, sector_t s, int sectors, diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c index 7eb9972a37e6..c145a5a114eb 100644 --- a/drivers/md/multipath.c +++ b/drivers/md/multipath.c @@ -298,12 +298,14 @@ static int multipath_remove_disk(struct mddev *mddev, struct md_rdev *rdev) goto abort; } p->rdev = NULL; - synchronize_rcu(); - if (atomic_read(&rdev->nr_pending)) { - /* lost the race, try later */ - err = -EBUSY; - p->rdev = rdev; - goto abort; + if (!test_bit(RemoveSynchronized, &rdev->flags)) { + synchronize_rcu(); + if (atomic_read(&rdev->nr_pending)) { + /* lost the race, try later */ + err = -EBUSY; + p->rdev = rdev; + goto abort; + } } err = md_integrity_register(mddev); } diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 34f20c03d1f6..5027ef4752ac 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1656,13 +1656,16 @@ static int raid1_remove_disk(struct mddev *mddev, struct md_rdev *rdev) goto abort; } p->rdev = NULL; - synchronize_rcu(); - if (atomic_read(&rdev->nr_pending)) { - /* lost the race, try later */ - err = -EBUSY; - p->rdev = rdev; - goto abort; - } else if (conf->mirrors[conf->raid_disks + number].rdev) { + if (!test_bit(RemoveSynchronized, &rdev->flags)) { + synchronize_rcu(); + if (atomic_read(&rdev->nr_pending)) { + /* lost the race, try later */ + err = -EBUSY; + p->rdev = rdev; + goto abort; + } + } + if (conf->mirrors[conf->raid_disks + number].rdev) { /* We just removed a device that is being replaced. * Move down the replacement. We drain all IO before * doing this to avoid confusion. diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 34facda18e72..8ee5d96e6a2d 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1766,7 +1766,7 @@ static int raid10_remove_disk(struct mddev *mddev, struct md_rdev *rdev) err = -EBUSY; goto abort; } - /* Only remove faulty devices if recovery + /* Only remove non-faulty devices if recovery * is not possible. */ if (!test_bit(Faulty, &rdev->flags) && @@ -1778,13 +1778,16 @@ static int raid10_remove_disk(struct mddev *mddev, struct md_rdev *rdev) goto abort; } *rdevp = NULL; - synchronize_rcu(); - if (atomic_read(&rdev->nr_pending)) { - /* lost the race, try later */ - err = -EBUSY; - *rdevp = rdev; - goto abort; - } else if (p->replacement) { + if (!test_bit(RemoveSynchronized, &rdev->flags)) { + synchronize_rcu(); + if (atomic_read(&rdev->nr_pending)) { + /* lost the race, try later */ + err = -EBUSY; + *rdevp = rdev; + goto abort; + } + } + if (p->replacement) { /* We must have just cleared 'rdev' */ p->rdev = p->replacement; clear_bit(Replacement, &p->replacement->flags); diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index f6a191aaaa91..413cc7d847da 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -7197,12 +7197,15 @@ static int raid5_remove_disk(struct mddev *mddev, struct md_rdev *rdev) goto abort; } *rdevp = NULL; - synchronize_rcu(); - if (atomic_read(&rdev->nr_pending)) { - /* lost the race, try later */ - err = -EBUSY; - *rdevp = rdev; - } else if (p->replacement) { + if (!test_bit(RemoveSynchronized, &rdev->flags)) { + synchronize_rcu(); + if (atomic_read(&rdev->nr_pending)) { + /* lost the race, try later */ + err = -EBUSY; + *rdevp = rdev; + } + } + if (p->replacement) { /* We must have just cleared 'rdev' */ p->rdev = p->replacement; clear_bit(Replacement, &p->replacement->flags); -- cgit v1.2.3 From 0e3ef49eda5bae3aa75aa8c0276411bf0f27e03a Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 17 Jun 2016 17:33:10 +0200 Subject: md: use seconds granularity for error logging The md code stores the exact time of the last error in the last_read_error variable using a timespec structure. It only ever uses the seconds portion of that though, so we can use a scalar for it. There won't be an overflow in 2038 here, because it already used monotonic time and 32-bit is enough for that, but I've decided to use time64_t for consistency in the conversion. Signed-off-by: Arnd Bergmann Signed-off-by: Shaohua Li --- drivers/md/md.c | 3 +-- drivers/md/md.h | 2 +- drivers/md/raid10.c | 11 +++++------ 3 files changed, 7 insertions(+), 9 deletions(-) (limited to 'drivers/md') diff --git a/drivers/md/md.c b/drivers/md/md.c index 2ed547f5c3b6..4b8a264e9777 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3173,8 +3173,7 @@ int md_rdev_init(struct md_rdev *rdev) rdev->data_offset = 0; rdev->new_data_offset = 0; rdev->sb_events = 0; - rdev->last_read_error.tv_sec = 0; - rdev->last_read_error.tv_nsec = 0; + rdev->last_read_error = 0; rdev->sb_loaded = 0; rdev->bb_page = NULL; atomic_set(&rdev->nr_pending, 0); diff --git a/drivers/md/md.h b/drivers/md/md.h index dc65ca65b26e..fd56cfd8c368 100644 --- a/drivers/md/md.h +++ b/drivers/md/md.h @@ -99,7 +99,7 @@ struct md_rdev { atomic_t read_errors; /* number of consecutive read errors that * we have tried to ignore. */ - struct timespec last_read_error; /* monotonic time since our + time64_t last_read_error; /* monotonic time since our * last read error */ atomic_t corrected_errors; /* number of corrected read errors, diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 8ee5d96e6a2d..f7f3c8a63419 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -2174,21 +2174,20 @@ static void recovery_request_write(struct mddev *mddev, struct r10bio *r10_bio) */ static void check_decay_read_errors(struct mddev *mddev, struct md_rdev *rdev) { - struct timespec cur_time_mon; + long cur_time_mon; unsigned long hours_since_last; unsigned int read_errors = atomic_read(&rdev->read_errors); - ktime_get_ts(&cur_time_mon); + cur_time_mon = ktime_get_seconds(); - if (rdev->last_read_error.tv_sec == 0 && - rdev->last_read_error.tv_nsec == 0) { + if (rdev->last_read_error == 0) { /* first time we've seen a read error */ rdev->last_read_error = cur_time_mon; return; } - hours_since_last = (cur_time_mon.tv_sec - - rdev->last_read_error.tv_sec) / 3600; + hours_since_last = (long)(cur_time_mon - + rdev->last_read_error) / 3600; rdev->last_read_error = cur_time_mon; -- cgit v1.2.3 From 4cb9da7d9c631514effa5e806f9de7c7c746c3a8 Mon Sep 17 00:00:00 2001 From: Alexey Obitotskiy Date: Thu, 23 Jun 2016 12:11:01 +0200 Subject: Fix kernel module refcount handling md loads raidX modules and increments module refcount each time level has changed but does not decrement it. You are unable to unload raid0 module after reshape because raid0 reshape changes level to raid4 and back to raid0. Signed-off-by: Aleksey Obitotskiy Signed-off-by: Shaohua Li --- drivers/md/md.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/md') diff --git a/drivers/md/md.c b/drivers/md/md.c index 4b8a264e9777..29297e97cdea 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3579,6 +3579,8 @@ level_store(struct mddev *mddev, const char *buf, size_t len) mddev->to_remove = &md_redundancy_group; } + module_put(oldpers->owner); + rdev_for_each(rdev, mddev) { if (rdev->raid_disk < 0) continue; -- cgit v1.2.3 From 573275b58ee9e1d2ec89f9608060f58931c3cde3 Mon Sep 17 00:00:00 2001 From: Tomasz Majchrzak Date: Thu, 30 Jun 2016 10:47:09 +0200 Subject: md: add missing sysfs_notify on array_state update Changeset 6791875e2e53 has added early return from a function so there is no sysfs notification for 'active' and 'clean' state change. Signed-off-by: Tomasz Majchrzak Signed-off-by: Shaohua Li --- drivers/md/md.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/md') diff --git a/drivers/md/md.c b/drivers/md/md.c index 29297e97cdea..f77cad854044 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3938,6 +3938,8 @@ array_state_store(struct mddev *mddev, const char *buf, size_t len) } else err = -EBUSY; } + if (!err) + sysfs_notify_dirent_safe(mddev->sysfs_state); spin_unlock(&mddev->lock); return err ?: len; } -- cgit v1.2.3 From 0e5313e2d4ef93bdf6c22dad647d28635b86472a Mon Sep 17 00:00:00 2001 From: Tomasz Majchrzak Date: Fri, 24 Jun 2016 14:20:16 +0200 Subject: raid10: improve random reads performance RAID10 random read performance is lower than expected due to excessive spinlock utilisation which is required mostly for rebuild/resync. Simplify allow_barrier as it's in IO path and encounters a lot of unnecessary congestion. As lower_barrier just takes a lock in order to decrement a counter, convert counter (nr_pending) into atomic variable and remove the spin lock. There is also a congestion for wake_up (it uses lock internally) so call it only when it's really needed. As wake_up is not called constantly anymore, ensure process waiting to raise a barrier is notified when there are no more waiting IOs. Signed-off-by: Tomasz Majchrzak Signed-off-by: Shaohua Li --- drivers/md/raid10.c | 21 ++++++++++++--------- drivers/md/raid10.h | 3 ++- 2 files changed, 14 insertions(+), 10 deletions(-) (limited to 'drivers/md') diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index f7f3c8a63419..cb1d88709ff0 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -905,7 +905,7 @@ static void raise_barrier(struct r10conf *conf, int force) /* Now wait for all pending IO to complete */ wait_event_lock_irq(conf->wait_barrier, - !conf->nr_pending && conf->barrier < RESYNC_DEPTH, + !atomic_read(&conf->nr_pending) && conf->barrier < RESYNC_DEPTH, conf->resync_lock); spin_unlock_irq(&conf->resync_lock); @@ -936,23 +936,23 @@ static void wait_barrier(struct r10conf *conf) */ wait_event_lock_irq(conf->wait_barrier, !conf->barrier || - (conf->nr_pending && + (atomic_read(&conf->nr_pending) && current->bio_list && !bio_list_empty(current->bio_list)), conf->resync_lock); conf->nr_waiting--; + if (!conf->nr_waiting) + wake_up(&conf->wait_barrier); } - conf->nr_pending++; + atomic_inc(&conf->nr_pending); spin_unlock_irq(&conf->resync_lock); } static void allow_barrier(struct r10conf *conf) { - unsigned long flags; - spin_lock_irqsave(&conf->resync_lock, flags); - conf->nr_pending--; - spin_unlock_irqrestore(&conf->resync_lock, flags); - wake_up(&conf->wait_barrier); + if ((atomic_dec_and_test(&conf->nr_pending)) || + (conf->array_freeze_pending)) + wake_up(&conf->wait_barrier); } static void freeze_array(struct r10conf *conf, int extra) @@ -970,13 +970,15 @@ static void freeze_array(struct r10conf *conf, int extra) * we continue. */ spin_lock_irq(&conf->resync_lock); + conf->array_freeze_pending++; conf->barrier++; conf->nr_waiting++; wait_event_lock_irq_cmd(conf->wait_barrier, - conf->nr_pending == conf->nr_queued+extra, + atomic_read(&conf->nr_pending) == conf->nr_queued+extra, conf->resync_lock, flush_pending_writes(conf)); + conf->array_freeze_pending--; spin_unlock_irq(&conf->resync_lock); } @@ -3542,6 +3544,7 @@ static struct r10conf *setup_conf(struct mddev *mddev) spin_lock_init(&conf->resync_lock); init_waitqueue_head(&conf->wait_barrier); + atomic_set(&conf->nr_pending, 0); conf->thread = md_register_thread(raid10d, mddev, "raid10"); if (!conf->thread) diff --git a/drivers/md/raid10.h b/drivers/md/raid10.h index 6fc2c75759bf..18ec1f7a98bf 100644 --- a/drivers/md/raid10.h +++ b/drivers/md/raid10.h @@ -64,10 +64,11 @@ struct r10conf { int pending_count; spinlock_t resync_lock; - int nr_pending; + atomic_t nr_pending; int nr_waiting; int nr_queued; int barrier; + int array_freeze_pending; sector_t next_resync; int fullsync; /* set to 1 if a full sync is needed, * (fresh device added). -- cgit v1.2.3 From 5d8817833c7609c24da9a92f71c53caa9c1424eb Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Thu, 28 Jul 2016 09:06:34 -0700 Subject: MD: fix null pointer deference The md device might not have personality (for example, ddf raid array). The issue is introduced by 8430e7e0af9a15(md: disconnect device from personality before trying to remove it) Reported-by: kernel test robot Signed-off-by: Shaohua Li --- drivers/md/md.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/md') diff --git a/drivers/md/md.c b/drivers/md/md.c index f77cad854044..c059f17b44d2 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -2595,8 +2595,10 @@ state_store(struct md_rdev *rdev, const char *buf, size_t len) else err = -EBUSY; } else if (cmd_match(buf, "remove")) { - clear_bit(Blocked, &rdev->flags); - remove_and_add_spares(rdev->mddev, rdev); + if (rdev->mddev->pers) { + clear_bit(Blocked, &rdev->flags); + remove_and_add_spares(rdev->mddev, rdev); + } if (rdev->raid_disk >= 0) err = -EBUSY; else { -- cgit v1.2.3