From 694e33a7f42de7dcc8b43c3990c597b19ef9b438 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 18 Oct 2012 14:01:25 +0200 Subject: ARM: plat-nomadik: move MTU, kill plat-nomadik This moves the MTU timer driver from arch/arm/plat-nomadik to drivers/clocksource and moves the header file to the platform_data directory. As this moves the last file being compiled to an object out of arch/arm/plat-nomadik, we have to "turn off the light" and delete the plat-nomadik directory, because it is not allowed to have an empty Makefile in a plat-* directory. This is probably also a desired side effect of depopulating the arch/arm directory of drivers. Luckily we have just deleted all the include files prior to this so by moving the last one we may delete the directory. After this all the Ux500 and Nomadik device drivers live outside of the arch/arm hierarchy. Cc: Alessandro Rubini Acked-by: Arnd Bergmann Signed-off-by: Linus Walleij --- drivers/input/keyboard/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/input') diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index b4b65af8612a..855fc52945db 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -408,7 +408,7 @@ config KEYBOARD_NEWTON config KEYBOARD_NOMADIK tristate "ST-Ericsson Nomadik SKE keyboard" - depends on PLAT_NOMADIK + depends on (ARCH_NOMADIK || ARCH_U8500) select INPUT_MATRIXKMAP help Say Y here if you want to use a keypad provided on the SKE controller -- cgit v1.2.3 From 33f5cc605d28bd82be8a728090063203947158f3 Mon Sep 17 00:00:00 2001 From: "Patil, Rachna" Date: Tue, 16 Oct 2012 12:55:38 +0530 Subject: input: TSC: ti_tscadc: Correct register usage This patch cleans up the wrong register definitions and usage for touchscreen controller. Bit masks were not defined earlier. For ex: consider a register define as: write(xyz, ABC) ABC is expected to be written to register bits 0-11. Here we see that value written is as expected, but this write is also affecting all the remaining bits of xyz. The remaining bits hold the default value as 0 and the write also sets it to zero. Hence wrong usage were not causing user visible bugs. Due to these reasons it was difficult to follow when compared with TRM. Unused definitions are also removed. Since there is change in some naming convention because of all the above mentioned reasons, the same has been updated throughout the code. Bit declarations are grouped to increase readability. Signed-off-by: Patil, Rachna Signed-off-by: Samuel Ortiz --- drivers/input/touchscreen/ti_tscadc.c | 128 ++++++++++++++++++++++------------ 1 file changed, 82 insertions(+), 46 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/ti_tscadc.c b/drivers/input/touchscreen/ti_tscadc.c index d229c741d544..d198cab61a69 100644 --- a/drivers/input/touchscreen/ti_tscadc.c +++ b/drivers/input/touchscreen/ti_tscadc.c @@ -52,43 +52,79 @@ /* Register Bitfields */ #define IRQWKUP_ENB BIT(0) -#define STPENB_STEPENB 0x7FFF + +/* Step Enable */ +#define STEPENB_MASK (0x1FFFF << 0) +#define STEPENB(val) (val << 0) +#define STPENB_STEPENB STEPENB(0x7FFF) + +/* IRQ enable */ #define IRQENB_FIFO1THRES BIT(5) #define IRQENB_PENUP BIT(9) -#define STEPCONFIG_MODE_HWSYNC 0x2 -#define STEPCONFIG_SAMPLES_AVG (1 << 4) -#define STEPCONFIG_XPP (1 << 5) -#define STEPCONFIG_XNN (1 << 6) -#define STEPCONFIG_YPP (1 << 7) -#define STEPCONFIG_YNN (1 << 8) -#define STEPCONFIG_XNP (1 << 9) -#define STEPCONFIG_YPN (1 << 10) -#define STEPCONFIG_INM (1 << 18) -#define STEPCONFIG_INP (1 << 20) -#define STEPCONFIG_INP_5 (1 << 21) -#define STEPCONFIG_FIFO1 (1 << 26) -#define STEPCONFIG_OPENDLY 0xff -#define STEPCONFIG_Z1 (3 << 19) -#define STEPIDLE_INP (1 << 22) -#define STEPCHARGE_RFP (1 << 12) -#define STEPCHARGE_INM (1 << 15) -#define STEPCHARGE_INP (1 << 19) -#define STEPCHARGE_RFM (1 << 23) -#define STEPCHARGE_DELAY 0x1 -#define CNTRLREG_TSCSSENB (1 << 0) -#define CNTRLREG_STEPID (1 << 1) -#define CNTRLREG_STEPCONFIGWRT (1 << 2) -#define CNTRLREG_4WIRE (1 << 5) -#define CNTRLREG_5WIRE (1 << 6) -#define CNTRLREG_8WIRE (3 << 5) -#define CNTRLREG_TSCENB (1 << 7) -#define ADCFSM_STEPID 0x10 +/* Step Configuration */ +#define STEPCONFIG_MODE_MASK (3 << 0) +#define STEPCONFIG_MODE(val) (val << 0) +#define STEPCONFIG_MODE_HWSYNC STEPCONFIG_MODE(2) +#define STEPCONFIG_AVG_MASK (7 << 2) +#define STEPCONFIG_AVG(val) (val << 2) +#define STEPCONFIG_AVG_16 STEPCONFIG_AVG(4) +#define STEPCONFIG_XPP BIT(5) +#define STEPCONFIG_XNN BIT(6) +#define STEPCONFIG_YPP BIT(7) +#define STEPCONFIG_YNN BIT(8) +#define STEPCONFIG_XNP BIT(9) +#define STEPCONFIG_YPN BIT(10) +#define STEPCONFIG_INM_MASK (0xF << 15) +#define STEPCONFIG_INM(val) (val << 15) +#define STEPCONFIG_INM_ADCREFM STEPCONFIG_INM(8) +#define STEPCONFIG_INP_MASK (0xF << 19) +#define STEPCONFIG_INP(val) (val << 19) +#define STEPCONFIG_INP_AN2 STEPCONFIG_INP(2) +#define STEPCONFIG_INP_AN3 STEPCONFIG_INP(3) +#define STEPCONFIG_INP_AN4 STEPCONFIG_INP(4) +#define STEPCONFIG_INP_ADCREFM STEPCONFIG_INP(8) +#define STEPCONFIG_FIFO1 BIT(26) + +/* Delay register */ +#define STEPDELAY_OPEN_MASK (0x3FFFF << 0) +#define STEPDELAY_OPEN(val) (val << 0) +#define STEPCONFIG_OPENDLY STEPDELAY_OPEN(0x098) + +/* Charge Config */ +#define STEPCHARGE_RFP_MASK (7 << 12) +#define STEPCHARGE_RFP(val) (val << 12) +#define STEPCHARGE_RFP_XPUL STEPCHARGE_RFP(1) +#define STEPCHARGE_INM_MASK (0xF << 15) +#define STEPCHARGE_INM(val) (val << 15) +#define STEPCHARGE_INM_AN1 STEPCHARGE_INM(1) +#define STEPCHARGE_INP_MASK (0xF << 19) +#define STEPCHARGE_INP(val) (val << 19) +#define STEPCHARGE_INP_AN1 STEPCHARGE_INP(1) +#define STEPCHARGE_RFM_MASK (3 << 23) +#define STEPCHARGE_RFM(val) (val << 23) +#define STEPCHARGE_RFM_XNUR STEPCHARGE_RFM(1) + +/* Charge delay */ +#define CHARGEDLY_OPEN_MASK (0x3FFFF << 0) +#define CHARGEDLY_OPEN(val) (val << 0) +#define CHARGEDLY_OPENDLY CHARGEDLY_OPEN(1) + +/* Control register */ +#define CNTRLREG_TSCSSENB BIT(0) +#define CNTRLREG_STEPID BIT(1) +#define CNTRLREG_STEPCONFIGWRT BIT(2) +#define CNTRLREG_AFE_CTRL_MASK (3 << 5) +#define CNTRLREG_AFE_CTRL(val) (val << 5) +#define CNTRLREG_4WIRE CNTRLREG_AFE_CTRL(1) +#define CNTRLREG_5WIRE CNTRLREG_AFE_CTRL(2) +#define CNTRLREG_8WIRE CNTRLREG_AFE_CTRL(3) +#define CNTRLREG_TSCENB BIT(7) + +#define ADCFSM_STEPID 0x10 #define SEQ_SETTLE 275 #define ADC_CLK 3000000 #define MAX_12BIT ((1 << 12) - 1) -#define TSCADC_DELTA_X 15 -#define TSCADC_DELTA_Y 15 struct tscadc { struct input_dev *input; @@ -119,18 +155,18 @@ static void tscadc_step_config(struct tscadc *ts_dev) /* Configure the Step registers */ config = STEPCONFIG_MODE_HWSYNC | - STEPCONFIG_SAMPLES_AVG | STEPCONFIG_XPP; + STEPCONFIG_AVG_16 | STEPCONFIG_XPP; switch (ts_dev->wires) { case 4: - config |= STEPCONFIG_INP | STEPCONFIG_XNN; + config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN; break; case 5: config |= STEPCONFIG_YNN | - STEPCONFIG_INP_5 | STEPCONFIG_XNN | + STEPCONFIG_INP_AN4 | STEPCONFIG_XNN | STEPCONFIG_YPP; break; case 8: - config |= STEPCONFIG_INP | STEPCONFIG_XNN; + config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN; break; } @@ -141,14 +177,14 @@ static void tscadc_step_config(struct tscadc *ts_dev) config = 0; config = STEPCONFIG_MODE_HWSYNC | - STEPCONFIG_SAMPLES_AVG | STEPCONFIG_YNN | - STEPCONFIG_INM | STEPCONFIG_FIFO1; + STEPCONFIG_AVG_16 | STEPCONFIG_YNN | + STEPCONFIG_INM_ADCREFM | STEPCONFIG_FIFO1; switch (ts_dev->wires) { case 4: config |= STEPCONFIG_YPP; break; case 5: - config |= STEPCONFIG_XPP | STEPCONFIG_INP_5 | + config |= STEPCONFIG_XPP | STEPCONFIG_INP_AN4 | STEPCONFIG_XNP | STEPCONFIG_YPN; break; case 8: @@ -164,21 +200,21 @@ static void tscadc_step_config(struct tscadc *ts_dev) config = 0; /* Charge step configuration */ config = STEPCONFIG_XPP | STEPCONFIG_YNN | - STEPCHARGE_RFP | STEPCHARGE_RFM | - STEPCHARGE_INM | STEPCHARGE_INP; + STEPCHARGE_RFP_XPUL | STEPCHARGE_RFM_XNUR | + STEPCHARGE_INM_AN1 | STEPCHARGE_INP_AN1; tscadc_writel(ts_dev, REG_CHARGECONFIG, config); - tscadc_writel(ts_dev, REG_CHARGEDELAY, STEPCHARGE_DELAY); + tscadc_writel(ts_dev, REG_CHARGEDELAY, CHARGEDLY_OPENDLY); config = 0; /* Configure to calculate pressure */ config = STEPCONFIG_MODE_HWSYNC | - STEPCONFIG_SAMPLES_AVG | STEPCONFIG_YPP | - STEPCONFIG_XNN | STEPCONFIG_INM; + STEPCONFIG_AVG_16 | STEPCONFIG_YPP | + STEPCONFIG_XNN | STEPCONFIG_INM_ADCREFM; tscadc_writel(ts_dev, REG_STEPCONFIG13, config); tscadc_writel(ts_dev, REG_STEPDELAY13, STEPCONFIG_OPENDLY); - config |= STEPCONFIG_Z1 | STEPCONFIG_FIFO1; + config |= STEPCONFIG_INP_AN3 | STEPCONFIG_FIFO1; tscadc_writel(ts_dev, REG_STEPCONFIG14, config); tscadc_writel(ts_dev, REG_STEPDELAY14, STEPCONFIG_OPENDLY); @@ -190,8 +226,8 @@ static void tscadc_idle_config(struct tscadc *ts_config) unsigned int idleconfig; idleconfig = STEPCONFIG_YNN | - STEPCONFIG_INM | - STEPCONFIG_YPN | STEPIDLE_INP; + STEPCONFIG_INM_ADCREFM | + STEPCONFIG_YPN | STEPCONFIG_INP_ADCREFM; tscadc_writel(ts_config, REG_IDLECONFIG, idleconfig); } -- cgit v1.2.3 From d1fb57435c108b8dd66d7f47b4c60c1798dcae4c Mon Sep 17 00:00:00 2001 From: "Patil, Rachna" Date: Tue, 16 Oct 2012 12:55:39 +0530 Subject: input: TSC: ti_tscadc: Add Step configuration as platform data There are 16 programmable Step Configuration registers which are used by the sequencer. Program the Steps in order to configure a channel input to be sampled. If the same step is applied several times, the coordinate values read are more accurate. Hence we provide the user an option of how many steps should be configured. For ex: If this value is assigned as 4, This means that 4 steps are applied to read x co-ordinate and 4 steps to read y co-ordinate. Furtheron the interrupt handler already holds code to use delta filter and report the best value out of these values to the input sub-system. Signed-off-by: Patil, Rachna Signed-off-by: Samuel Ortiz --- drivers/input/touchscreen/ti_tscadc.c | 25 +++++++++++++------------ include/linux/input/ti_tscadc.h | 6 ++++++ 2 files changed, 19 insertions(+), 12 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/ti_tscadc.c b/drivers/input/touchscreen/ti_tscadc.c index d198cab61a69..c1bd8e5c132c 100644 --- a/drivers/input/touchscreen/ti_tscadc.c +++ b/drivers/input/touchscreen/ti_tscadc.c @@ -41,10 +41,6 @@ #define REG_CHARGEDELAY 0x060 #define REG_STEPCONFIG(n) (0x64 + ((n - 1) * 8)) #define REG_STEPDELAY(n) (0x68 + ((n - 1) * 8)) -#define REG_STEPCONFIG13 0x0C4 -#define REG_STEPDELAY13 0x0C8 -#define REG_STEPCONFIG14 0x0CC -#define REG_STEPDELAY14 0x0D0 #define REG_FIFO0CNT 0xE4 #define REG_FIFO1THR 0xF4 #define REG_FIFO0 0x100 @@ -134,6 +130,7 @@ struct tscadc { unsigned int wires; unsigned int x_plate_resistance; bool pen_down; + int steps_to_configure; }; static unsigned int tscadc_readl(struct tscadc *ts, unsigned int reg) @@ -150,9 +147,10 @@ static void tscadc_writel(struct tscadc *tsc, unsigned int reg, static void tscadc_step_config(struct tscadc *ts_dev) { unsigned int config; - int i; + int i, total_steps; /* Configure the Step registers */ + total_steps = 2 * ts_dev->steps_to_configure; config = STEPCONFIG_MODE_HWSYNC | STEPCONFIG_AVG_16 | STEPCONFIG_XPP; @@ -170,7 +168,7 @@ static void tscadc_step_config(struct tscadc *ts_dev) break; } - for (i = 1; i < 7; i++) { + for (i = 1; i <= ts_dev->steps_to_configure; i++) { tscadc_writel(ts_dev, REG_STEPCONFIG(i), config); tscadc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY); } @@ -192,7 +190,7 @@ static void tscadc_step_config(struct tscadc *ts_dev) break; } - for (i = 7; i < 13; i++) { + for (i = (ts_dev->steps_to_configure + 1); i <= total_steps; i++) { tscadc_writel(ts_dev, REG_STEPCONFIG(i), config); tscadc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY); } @@ -211,12 +209,14 @@ static void tscadc_step_config(struct tscadc *ts_dev) config = STEPCONFIG_MODE_HWSYNC | STEPCONFIG_AVG_16 | STEPCONFIG_YPP | STEPCONFIG_XNN | STEPCONFIG_INM_ADCREFM; - tscadc_writel(ts_dev, REG_STEPCONFIG13, config); - tscadc_writel(ts_dev, REG_STEPDELAY13, STEPCONFIG_OPENDLY); + tscadc_writel(ts_dev, REG_STEPCONFIG(total_steps + 1), config); + tscadc_writel(ts_dev, REG_STEPDELAY(total_steps + 1), + STEPCONFIG_OPENDLY); config |= STEPCONFIG_INP_AN3 | STEPCONFIG_FIFO1; - tscadc_writel(ts_dev, REG_STEPCONFIG14, config); - tscadc_writel(ts_dev, REG_STEPDELAY14, STEPCONFIG_OPENDLY); + tscadc_writel(ts_dev, REG_STEPCONFIG(total_steps + 2), config); + tscadc_writel(ts_dev, REG_STEPDELAY(total_steps + 2), + STEPCONFIG_OPENDLY); tscadc_writel(ts_dev, REG_SE, STPENB_STEPENB); } @@ -379,6 +379,7 @@ static int __devinit tscadc_probe(struct platform_device *pdev) ts_dev->irq = irq; ts_dev->wires = pdata->wires; ts_dev->x_plate_resistance = pdata->x_plate_resistance; + ts_dev->steps_to_configure = pdata->steps_to_configure; res = request_mem_region(res->start, resource_size(res), pdev->name); if (!res) { @@ -447,7 +448,7 @@ static int __devinit tscadc_probe(struct platform_device *pdev) tscadc_idle_config(ts_dev); tscadc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO1THRES); tscadc_step_config(ts_dev); - tscadc_writel(ts_dev, REG_FIFO1THR, 6); + tscadc_writel(ts_dev, REG_FIFO1THR, ts_dev->steps_to_configure); ctrl |= CNTRLREG_TSCSSENB; tscadc_writel(ts_dev, REG_CTRL, ctrl); diff --git a/include/linux/input/ti_tscadc.h b/include/linux/input/ti_tscadc.h index b10a527a92a4..ad442a3eb68b 100644 --- a/include/linux/input/ti_tscadc.h +++ b/include/linux/input/ti_tscadc.h @@ -7,11 +7,17 @@ * i.e. 4/5/8 wire touchscreen support * on the platform. * @x_plate_resistance: X plate resistance. + * @steps_to_configure: The sequencer supports a total of + * 16 programmable steps. + * A step configured to read a single + * co-ordinate value, can be applied + * more number of times for better results. */ struct tsc_data { int wires; int x_plate_resistance; + int steps_to_configure; }; #endif -- cgit v1.2.3 From 30af55f930c2f69d8f3dcd658fb3ee352ebc54c1 Mon Sep 17 00:00:00 2001 From: "Patil, Rachna" Date: Tue, 16 Oct 2012 12:55:40 +0530 Subject: input: TSC: ti_tscadc: set FIFO0 threshold Interrupt Code currently uses FIFO1 threshold interrupt. since this is a MFD, Dedicating FIFO0 to touchscreen and making way for other devices to use FIFO1 as well. The FIFO can be shared between 2 devices but since the interrupt used is threshold interrupt on FIFO1, we would end up having wrong interrupts. Hence changing the same. Signed-off-by: Patil, Rachna Signed-off-by: Samuel Ortiz --- drivers/input/touchscreen/ti_tscadc.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/ti_tscadc.c b/drivers/input/touchscreen/ti_tscadc.c index c1bd8e5c132c..2cc19b09e31c 100644 --- a/drivers/input/touchscreen/ti_tscadc.c +++ b/drivers/input/touchscreen/ti_tscadc.c @@ -42,6 +42,7 @@ #define REG_STEPCONFIG(n) (0x64 + ((n - 1) * 8)) #define REG_STEPDELAY(n) (0x68 + ((n - 1) * 8)) #define REG_FIFO0CNT 0xE4 +#define REG_FIFO0THR 0xE8 #define REG_FIFO1THR 0xF4 #define REG_FIFO0 0x100 #define REG_FIFO1 0x200 @@ -55,6 +56,7 @@ #define STPENB_STEPENB STEPENB(0x7FFF) /* IRQ enable */ +#define IRQENB_FIFO0THRES BIT(2) #define IRQENB_FIFO1THRES BIT(5) #define IRQENB_PENUP BIT(9) @@ -277,7 +279,7 @@ static irqreturn_t tscadc_irq(int irq, void *dev) unsigned int fsm; status = tscadc_readl(ts_dev, REG_IRQSTATUS); - if (status & IRQENB_FIFO1THRES) { + if (status & IRQENB_FIFO0THRES) { tscadc_read_coordinates(ts_dev, &x, &y); z1 = tscadc_readl(ts_dev, REG_FIFO0) & 0xfff; @@ -303,7 +305,7 @@ static irqreturn_t tscadc_irq(int irq, void *dev) input_sync(input_dev); } } - irqclr |= IRQENB_FIFO1THRES; + irqclr |= IRQENB_FIFO0THRES; } /* @@ -446,9 +448,9 @@ static int __devinit tscadc_probe(struct platform_device *pdev) tscadc_writel(ts_dev, REG_CTRL, ctrl); tscadc_idle_config(ts_dev); - tscadc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO1THRES); + tscadc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES); tscadc_step_config(ts_dev); - tscadc_writel(ts_dev, REG_FIFO1THR, ts_dev->steps_to_configure); + tscadc_writel(ts_dev, REG_FIFO0THR, ts_dev->steps_to_configure); ctrl |= CNTRLREG_TSCSSENB; tscadc_writel(ts_dev, REG_CTRL, ctrl); -- cgit v1.2.3 From c6e86db2bec56e05c7ad1524ed2273a4cc8e8868 Mon Sep 17 00:00:00 2001 From: "Patil, Rachna" Date: Tue, 16 Oct 2012 12:55:41 +0530 Subject: input: TSC: ti_tscadc: Remove definition of End Of Interrupt register The touchscreen IP uses level sensitive interrupts rather than edge sensitive interrupts and therefore the is no need to use the EOI register to have the module re-strobe the interrupt line if there pending interrupts exist. Signed-off-by: Patil, Rachna Signed-off-by: Samuel Ortiz --- drivers/input/touchscreen/ti_tscadc.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/ti_tscadc.c b/drivers/input/touchscreen/ti_tscadc.c index 2cc19b09e31c..ec0a442478a8 100644 --- a/drivers/input/touchscreen/ti_tscadc.c +++ b/drivers/input/touchscreen/ti_tscadc.c @@ -27,7 +27,6 @@ #include #include -#define REG_IRQEOI 0x020 #define REG_RAWIRQSTATUS 0x024 #define REG_IRQSTATUS 0x028 #define REG_IRQENABLE 0x02C @@ -330,8 +329,6 @@ static irqreturn_t tscadc_irq(int irq, void *dev) } tscadc_writel(ts_dev, REG_IRQSTATUS, irqclr); - /* check pending interrupts */ - tscadc_writel(ts_dev, REG_IRQEOI, 0x0); tscadc_writel(ts_dev, REG_SE, STPENB_STEPENB); return IRQ_HANDLED; -- cgit v1.2.3 From 55c04de5176ea3eac6fdc469a6a063c5cb91ed7c Mon Sep 17 00:00:00 2001 From: "Patil, Rachna" Date: Tue, 16 Oct 2012 12:55:42 +0530 Subject: input: TSC: ti_tscadc: Rename the existing touchscreen driver Make way for addition of MFD driver. The existing touchsreen driver is a MFD client. For better readability we rename the file to indicate its functionality as only touchscreen. Signed-off-by: Patil, Rachna Signed-off-by: Samuel Ortiz --- drivers/input/touchscreen/Kconfig | 4 +- drivers/input/touchscreen/Makefile | 2 +- drivers/input/touchscreen/ti_am335x_tsc.c | 522 ++++++++++++++++++++++++++++++ drivers/input/touchscreen/ti_tscadc.c | 522 ------------------------------ include/linux/input/ti_am335x_tsc.h | 23 ++ include/linux/input/ti_tscadc.h | 23 -- 6 files changed, 548 insertions(+), 548 deletions(-) create mode 100644 drivers/input/touchscreen/ti_am335x_tsc.c delete mode 100644 drivers/input/touchscreen/ti_tscadc.c create mode 100644 include/linux/input/ti_am335x_tsc.h delete mode 100644 include/linux/input/ti_tscadc.h (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index f7668b24c378..d31dc5faeaaf 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -529,7 +529,7 @@ config TOUCHSCREEN_TOUCHWIN To compile this driver as a module, choose M here: the module will be called touchwin. -config TOUCHSCREEN_TI_TSCADC +config TOUCHSCREEN_TI_AM335X_TSC tristate "TI Touchscreen Interface" depends on ARCH_OMAP2PLUS help @@ -539,7 +539,7 @@ config TOUCHSCREEN_TI_TSCADC If unsure, say N. To compile this driver as a module, choose M here: the - module will be called ti_tscadc. + module will be called ti_am335x_tsc. config TOUCHSCREEN_ATMEL_TSADCC tristate "Atmel Touchscreen Interface" diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 178eb128d90f..7c4c78ebe49e 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -52,7 +52,7 @@ obj-$(CONFIG_TOUCHSCREEN_PIXCIR) += pixcir_i2c_ts.o obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o obj-$(CONFIG_TOUCHSCREEN_ST1232) += st1232.o obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o -obj-$(CONFIG_TOUCHSCREEN_TI_TSCADC) += ti_tscadc.o +obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC) += ti_am335x_tsc.o obj-$(CONFIG_TOUCHSCREEN_TNETV107X) += tnetv107x-ts.o obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c new file mode 100644 index 000000000000..462950acb97b --- /dev/null +++ b/drivers/input/touchscreen/ti_am335x_tsc.c @@ -0,0 +1,522 @@ +/* + * TI Touch Screen driver + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define REG_RAWIRQSTATUS 0x024 +#define REG_IRQSTATUS 0x028 +#define REG_IRQENABLE 0x02C +#define REG_IRQWAKEUP 0x034 +#define REG_CTRL 0x040 +#define REG_ADCFSM 0x044 +#define REG_CLKDIV 0x04C +#define REG_SE 0x054 +#define REG_IDLECONFIG 0x058 +#define REG_CHARGECONFIG 0x05C +#define REG_CHARGEDELAY 0x060 +#define REG_STEPCONFIG(n) (0x64 + ((n - 1) * 8)) +#define REG_STEPDELAY(n) (0x68 + ((n - 1) * 8)) +#define REG_FIFO0CNT 0xE4 +#define REG_FIFO0THR 0xE8 +#define REG_FIFO1THR 0xF4 +#define REG_FIFO0 0x100 +#define REG_FIFO1 0x200 + +/* Register Bitfields */ +#define IRQWKUP_ENB BIT(0) + +/* Step Enable */ +#define STEPENB_MASK (0x1FFFF << 0) +#define STEPENB(val) (val << 0) +#define STPENB_STEPENB STEPENB(0x7FFF) + +/* IRQ enable */ +#define IRQENB_FIFO0THRES BIT(2) +#define IRQENB_FIFO1THRES BIT(5) +#define IRQENB_PENUP BIT(9) + +/* Step Configuration */ +#define STEPCONFIG_MODE_MASK (3 << 0) +#define STEPCONFIG_MODE(val) (val << 0) +#define STEPCONFIG_MODE_HWSYNC STEPCONFIG_MODE(2) +#define STEPCONFIG_AVG_MASK (7 << 2) +#define STEPCONFIG_AVG(val) (val << 2) +#define STEPCONFIG_AVG_16 STEPCONFIG_AVG(4) +#define STEPCONFIG_XPP BIT(5) +#define STEPCONFIG_XNN BIT(6) +#define STEPCONFIG_YPP BIT(7) +#define STEPCONFIG_YNN BIT(8) +#define STEPCONFIG_XNP BIT(9) +#define STEPCONFIG_YPN BIT(10) +#define STEPCONFIG_INM_MASK (0xF << 15) +#define STEPCONFIG_INM(val) (val << 15) +#define STEPCONFIG_INM_ADCREFM STEPCONFIG_INM(8) +#define STEPCONFIG_INP_MASK (0xF << 19) +#define STEPCONFIG_INP(val) (val << 19) +#define STEPCONFIG_INP_AN2 STEPCONFIG_INP(2) +#define STEPCONFIG_INP_AN3 STEPCONFIG_INP(3) +#define STEPCONFIG_INP_AN4 STEPCONFIG_INP(4) +#define STEPCONFIG_INP_ADCREFM STEPCONFIG_INP(8) +#define STEPCONFIG_FIFO1 BIT(26) + +/* Delay register */ +#define STEPDELAY_OPEN_MASK (0x3FFFF << 0) +#define STEPDELAY_OPEN(val) (val << 0) +#define STEPCONFIG_OPENDLY STEPDELAY_OPEN(0x098) + +/* Charge Config */ +#define STEPCHARGE_RFP_MASK (7 << 12) +#define STEPCHARGE_RFP(val) (val << 12) +#define STEPCHARGE_RFP_XPUL STEPCHARGE_RFP(1) +#define STEPCHARGE_INM_MASK (0xF << 15) +#define STEPCHARGE_INM(val) (val << 15) +#define STEPCHARGE_INM_AN1 STEPCHARGE_INM(1) +#define STEPCHARGE_INP_MASK (0xF << 19) +#define STEPCHARGE_INP(val) (val << 19) +#define STEPCHARGE_INP_AN1 STEPCHARGE_INP(1) +#define STEPCHARGE_RFM_MASK (3 << 23) +#define STEPCHARGE_RFM(val) (val << 23) +#define STEPCHARGE_RFM_XNUR STEPCHARGE_RFM(1) + +/* Charge delay */ +#define CHARGEDLY_OPEN_MASK (0x3FFFF << 0) +#define CHARGEDLY_OPEN(val) (val << 0) +#define CHARGEDLY_OPENDLY CHARGEDLY_OPEN(1) + +/* Control register */ +#define CNTRLREG_TSCSSENB BIT(0) +#define CNTRLREG_STEPID BIT(1) +#define CNTRLREG_STEPCONFIGWRT BIT(2) +#define CNTRLREG_AFE_CTRL_MASK (3 << 5) +#define CNTRLREG_AFE_CTRL(val) (val << 5) +#define CNTRLREG_4WIRE CNTRLREG_AFE_CTRL(1) +#define CNTRLREG_5WIRE CNTRLREG_AFE_CTRL(2) +#define CNTRLREG_8WIRE CNTRLREG_AFE_CTRL(3) +#define CNTRLREG_TSCENB BIT(7) + +#define ADCFSM_STEPID 0x10 +#define SEQ_SETTLE 275 +#define ADC_CLK 3000000 +#define MAX_12BIT ((1 << 12) - 1) + +struct titsc { + struct input_dev *input; + struct clk *tsc_ick; + void __iomem *tsc_base; + unsigned int irq; + unsigned int wires; + unsigned int x_plate_resistance; + bool pen_down; + int steps_to_configure; +}; + +static unsigned int titsc_readl(struct titsc *ts, unsigned int reg) +{ + return readl(ts->tsc_base + reg); +} + +static void titsc_writel(struct titsc *tsc, unsigned int reg, + unsigned int val) +{ + writel(val, tsc->tsc_base + reg); +} + +static void titsc_step_config(struct titsc *ts_dev) +{ + unsigned int config; + int i, total_steps; + + /* Configure the Step registers */ + total_steps = 2 * ts_dev->steps_to_configure; + + config = STEPCONFIG_MODE_HWSYNC | + STEPCONFIG_AVG_16 | STEPCONFIG_XPP; + switch (ts_dev->wires) { + case 4: + config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN; + break; + case 5: + config |= STEPCONFIG_YNN | + STEPCONFIG_INP_AN4 | STEPCONFIG_XNN | + STEPCONFIG_YPP; + break; + case 8: + config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN; + break; + } + + for (i = 1; i <= ts_dev->steps_to_configure; i++) { + titsc_writel(ts_dev, REG_STEPCONFIG(i), config); + titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY); + } + + config = 0; + config = STEPCONFIG_MODE_HWSYNC | + STEPCONFIG_AVG_16 | STEPCONFIG_YNN | + STEPCONFIG_INM_ADCREFM | STEPCONFIG_FIFO1; + switch (ts_dev->wires) { + case 4: + config |= STEPCONFIG_YPP; + break; + case 5: + config |= STEPCONFIG_XPP | STEPCONFIG_INP_AN4 | + STEPCONFIG_XNP | STEPCONFIG_YPN; + break; + case 8: + config |= STEPCONFIG_YPP; + break; + } + + for (i = (ts_dev->steps_to_configure + 1); i <= total_steps; i++) { + titsc_writel(ts_dev, REG_STEPCONFIG(i), config); + titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY); + } + + config = 0; + /* Charge step configuration */ + config = STEPCONFIG_XPP | STEPCONFIG_YNN | + STEPCHARGE_RFP_XPUL | STEPCHARGE_RFM_XNUR | + STEPCHARGE_INM_AN1 | STEPCHARGE_INP_AN1; + + titsc_writel(ts_dev, REG_CHARGECONFIG, config); + titsc_writel(ts_dev, REG_CHARGEDELAY, CHARGEDLY_OPENDLY); + + config = 0; + /* Configure to calculate pressure */ + config = STEPCONFIG_MODE_HWSYNC | + STEPCONFIG_AVG_16 | STEPCONFIG_YPP | + STEPCONFIG_XNN | STEPCONFIG_INM_ADCREFM; + titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 1), config); + titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 1), + STEPCONFIG_OPENDLY); + + config |= STEPCONFIG_INP_AN3 | STEPCONFIG_FIFO1; + titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 2), config); + titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 2), + STEPCONFIG_OPENDLY); + + titsc_writel(ts_dev, REG_SE, STPENB_STEPENB); +} + +static void titsc_idle_config(struct titsc *ts_config) +{ + unsigned int idleconfig; + + idleconfig = STEPCONFIG_YNN | + STEPCONFIG_INM_ADCREFM | + STEPCONFIG_YPN | STEPCONFIG_INP_ADCREFM; + titsc_writel(ts_config, REG_IDLECONFIG, idleconfig); +} + +static void titsc_read_coordinates(struct titsc *ts_dev, + unsigned int *x, unsigned int *y) +{ + unsigned int fifocount = titsc_readl(ts_dev, REG_FIFO0CNT); + unsigned int prev_val_x = ~0, prev_val_y = ~0; + unsigned int prev_diff_x = ~0, prev_diff_y = ~0; + unsigned int read, diff; + unsigned int i; + + /* + * Delta filter is used to remove large variations in sampled + * values from ADC. The filter tries to predict where the next + * coordinate could be. This is done by taking a previous + * coordinate and subtracting it form current one. Further the + * algorithm compares the difference with that of a present value, + * if true the value is reported to the sub system. + */ + for (i = 0; i < fifocount - 1; i++) { + read = titsc_readl(ts_dev, REG_FIFO0) & 0xfff; + diff = abs(read - prev_val_x); + if (diff < prev_diff_x) { + prev_diff_x = diff; + *x = read; + } + prev_val_x = read; + + read = titsc_readl(ts_dev, REG_FIFO1) & 0xfff; + diff = abs(read - prev_val_y); + if (diff < prev_diff_y) { + prev_diff_y = diff; + *y = read; + } + prev_val_y = read; + } +} + +static irqreturn_t titsc_irq(int irq, void *dev) +{ + struct titsc *ts_dev = dev; + struct input_dev *input_dev = ts_dev->input; + unsigned int status, irqclr = 0; + unsigned int x = 0, y = 0; + unsigned int z1, z2, z; + unsigned int fsm; + + status = titsc_readl(ts_dev, REG_IRQSTATUS); + if (status & IRQENB_FIFO0THRES) { + titsc_read_coordinates(ts_dev, &x, &y); + + z1 = titsc_readl(ts_dev, REG_FIFO0) & 0xfff; + z2 = titsc_readl(ts_dev, REG_FIFO1) & 0xfff; + + if (ts_dev->pen_down && z1 != 0 && z2 != 0) { + /* + * Calculate pressure using formula + * Resistance(touch) = x plate resistance * + * x postion/4096 * ((z2 / z1) - 1) + */ + z = z2 - z1; + z *= x; + z *= ts_dev->x_plate_resistance; + z /= z1; + z = (z + 2047) >> 12; + + if (z <= MAX_12BIT) { + input_report_abs(input_dev, ABS_X, x); + input_report_abs(input_dev, ABS_Y, y); + input_report_abs(input_dev, ABS_PRESSURE, z); + input_report_key(input_dev, BTN_TOUCH, 1); + input_sync(input_dev); + } + } + irqclr |= IRQENB_FIFO0THRES; + } + + /* + * Time for sequencer to settle, to read + * correct state of the sequencer. + */ + udelay(SEQ_SETTLE); + + status = titsc_readl(ts_dev, REG_RAWIRQSTATUS); + if (status & IRQENB_PENUP) { + /* Pen up event */ + fsm = titsc_readl(ts_dev, REG_ADCFSM); + if (fsm == ADCFSM_STEPID) { + ts_dev->pen_down = false; + input_report_key(input_dev, BTN_TOUCH, 0); + input_report_abs(input_dev, ABS_PRESSURE, 0); + input_sync(input_dev); + } else { + ts_dev->pen_down = true; + } + irqclr |= IRQENB_PENUP; + } + + titsc_writel(ts_dev, REG_IRQSTATUS, irqclr); + + titsc_writel(ts_dev, REG_SE, STPENB_STEPENB); + return IRQ_HANDLED; +} + +/* + * The functions for inserting/removing driver as a module. + */ + +static int __devinit titsc_probe(struct platform_device *pdev) +{ + const struct tsc_data *pdata = pdev->dev.platform_data; + struct resource *res; + struct titsc *ts_dev; + struct input_dev *input_dev; + struct clk *clk; + int err; + int clk_value, ctrl, irq; + + if (!pdata) { + dev_err(&pdev->dev, "missing platform data.\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "no memory resource defined.\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "no irq ID is specified.\n"); + return -EINVAL; + } + + /* Allocate memory for device */ + ts_dev = kzalloc(sizeof(struct titsc), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ts_dev || !input_dev) { + dev_err(&pdev->dev, "failed to allocate memory.\n"); + err = -ENOMEM; + goto err_free_mem; + } + + ts_dev->input = input_dev; + ts_dev->irq = irq; + ts_dev->wires = pdata->wires; + ts_dev->x_plate_resistance = pdata->x_plate_resistance; + ts_dev->steps_to_configure = pdata->steps_to_configure; + + res = request_mem_region(res->start, resource_size(res), pdev->name); + if (!res) { + dev_err(&pdev->dev, "failed to reserve registers.\n"); + err = -EBUSY; + goto err_free_mem; + } + + ts_dev->tsc_base = ioremap(res->start, resource_size(res)); + if (!ts_dev->tsc_base) { + dev_err(&pdev->dev, "failed to map registers.\n"); + err = -ENOMEM; + goto err_release_mem_region; + } + + err = request_irq(ts_dev->irq, titsc_irq, + 0, pdev->dev.driver->name, ts_dev); + if (err) { + dev_err(&pdev->dev, "failed to allocate irq.\n"); + goto err_unmap_regs; + } + + ts_dev->tsc_ick = clk_get(&pdev->dev, "adc_tsc_ick"); + if (IS_ERR(ts_dev->tsc_ick)) { + dev_err(&pdev->dev, "failed to get TSC ick\n"); + goto err_free_irq; + } + clk_enable(ts_dev->tsc_ick); + + clk = clk_get(&pdev->dev, "adc_tsc_fck"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "failed to get TSC fck\n"); + err = PTR_ERR(clk); + goto err_disable_clk; + } + + clk_value = clk_get_rate(clk) / ADC_CLK; + clk_put(clk); + + if (clk_value < 7) { + dev_err(&pdev->dev, "clock input less than min clock requirement\n"); + goto err_disable_clk; + } + /* CLKDIV needs to be configured to the value minus 1 */ + titsc_writel(ts_dev, REG_CLKDIV, clk_value - 1); + + /* Enable wake-up of the SoC using touchscreen */ + titsc_writel(ts_dev, REG_IRQWAKEUP, IRQWKUP_ENB); + + ctrl = CNTRLREG_STEPCONFIGWRT | + CNTRLREG_TSCENB | + CNTRLREG_STEPID; + switch (ts_dev->wires) { + case 4: + ctrl |= CNTRLREG_4WIRE; + break; + case 5: + ctrl |= CNTRLREG_5WIRE; + break; + case 8: + ctrl |= CNTRLREG_8WIRE; + break; + } + titsc_writel(ts_dev, REG_CTRL, ctrl); + + titsc_idle_config(ts_dev); + titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES); + titsc_step_config(ts_dev); + titsc_writel(ts_dev, REG_FIFO0THR, ts_dev->steps_to_configure); + + ctrl |= CNTRLREG_TSCSSENB; + titsc_writel(ts_dev, REG_CTRL, ctrl); + + input_dev->name = "ti-tsc-adc"; + input_dev->dev.parent = &pdev->dev; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0); + + /* register to the input system */ + err = input_register_device(input_dev); + if (err) + goto err_disable_clk; + + platform_set_drvdata(pdev, ts_dev); + return 0; + +err_disable_clk: + clk_disable(ts_dev->tsc_ick); + clk_put(ts_dev->tsc_ick); +err_free_irq: + free_irq(ts_dev->irq, ts_dev); +err_unmap_regs: + iounmap(ts_dev->tsc_base); +err_release_mem_region: + release_mem_region(res->start, resource_size(res)); +err_free_mem: + input_free_device(input_dev); + kfree(ts_dev); + return err; +} + +static int __devexit titsc_remove(struct platform_device *pdev) +{ + struct titsc *ts_dev = platform_get_drvdata(pdev); + struct resource *res; + + free_irq(ts_dev->irq, ts_dev); + + input_unregister_device(ts_dev->input); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + iounmap(ts_dev->tsc_base); + release_mem_region(res->start, resource_size(res)); + + clk_disable(ts_dev->tsc_ick); + clk_put(ts_dev->tsc_ick); + + kfree(ts_dev); + + platform_set_drvdata(pdev, NULL); + return 0; +} + +static struct platform_driver ti_tsc_driver = { + .probe = titsc_probe, + .remove = __devexit_p(titsc_remove), + .driver = { + .name = "tsc", + .owner = THIS_MODULE, + }, +}; +module_platform_driver(ti_tsc_driver); + +MODULE_DESCRIPTION("TI touchscreen controller driver"); +MODULE_AUTHOR("Rachna Patil "); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/ti_tscadc.c b/drivers/input/touchscreen/ti_tscadc.c deleted file mode 100644 index ec0a442478a8..000000000000 --- a/drivers/input/touchscreen/ti_tscadc.c +++ /dev/null @@ -1,522 +0,0 @@ -/* - * TI Touch Screen driver - * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define REG_RAWIRQSTATUS 0x024 -#define REG_IRQSTATUS 0x028 -#define REG_IRQENABLE 0x02C -#define REG_IRQWAKEUP 0x034 -#define REG_CTRL 0x040 -#define REG_ADCFSM 0x044 -#define REG_CLKDIV 0x04C -#define REG_SE 0x054 -#define REG_IDLECONFIG 0x058 -#define REG_CHARGECONFIG 0x05C -#define REG_CHARGEDELAY 0x060 -#define REG_STEPCONFIG(n) (0x64 + ((n - 1) * 8)) -#define REG_STEPDELAY(n) (0x68 + ((n - 1) * 8)) -#define REG_FIFO0CNT 0xE4 -#define REG_FIFO0THR 0xE8 -#define REG_FIFO1THR 0xF4 -#define REG_FIFO0 0x100 -#define REG_FIFO1 0x200 - -/* Register Bitfields */ -#define IRQWKUP_ENB BIT(0) - -/* Step Enable */ -#define STEPENB_MASK (0x1FFFF << 0) -#define STEPENB(val) (val << 0) -#define STPENB_STEPENB STEPENB(0x7FFF) - -/* IRQ enable */ -#define IRQENB_FIFO0THRES BIT(2) -#define IRQENB_FIFO1THRES BIT(5) -#define IRQENB_PENUP BIT(9) - -/* Step Configuration */ -#define STEPCONFIG_MODE_MASK (3 << 0) -#define STEPCONFIG_MODE(val) (val << 0) -#define STEPCONFIG_MODE_HWSYNC STEPCONFIG_MODE(2) -#define STEPCONFIG_AVG_MASK (7 << 2) -#define STEPCONFIG_AVG(val) (val << 2) -#define STEPCONFIG_AVG_16 STEPCONFIG_AVG(4) -#define STEPCONFIG_XPP BIT(5) -#define STEPCONFIG_XNN BIT(6) -#define STEPCONFIG_YPP BIT(7) -#define STEPCONFIG_YNN BIT(8) -#define STEPCONFIG_XNP BIT(9) -#define STEPCONFIG_YPN BIT(10) -#define STEPCONFIG_INM_MASK (0xF << 15) -#define STEPCONFIG_INM(val) (val << 15) -#define STEPCONFIG_INM_ADCREFM STEPCONFIG_INM(8) -#define STEPCONFIG_INP_MASK (0xF << 19) -#define STEPCONFIG_INP(val) (val << 19) -#define STEPCONFIG_INP_AN2 STEPCONFIG_INP(2) -#define STEPCONFIG_INP_AN3 STEPCONFIG_INP(3) -#define STEPCONFIG_INP_AN4 STEPCONFIG_INP(4) -#define STEPCONFIG_INP_ADCREFM STEPCONFIG_INP(8) -#define STEPCONFIG_FIFO1 BIT(26) - -/* Delay register */ -#define STEPDELAY_OPEN_MASK (0x3FFFF << 0) -#define STEPDELAY_OPEN(val) (val << 0) -#define STEPCONFIG_OPENDLY STEPDELAY_OPEN(0x098) - -/* Charge Config */ -#define STEPCHARGE_RFP_MASK (7 << 12) -#define STEPCHARGE_RFP(val) (val << 12) -#define STEPCHARGE_RFP_XPUL STEPCHARGE_RFP(1) -#define STEPCHARGE_INM_MASK (0xF << 15) -#define STEPCHARGE_INM(val) (val << 15) -#define STEPCHARGE_INM_AN1 STEPCHARGE_INM(1) -#define STEPCHARGE_INP_MASK (0xF << 19) -#define STEPCHARGE_INP(val) (val << 19) -#define STEPCHARGE_INP_AN1 STEPCHARGE_INP(1) -#define STEPCHARGE_RFM_MASK (3 << 23) -#define STEPCHARGE_RFM(val) (val << 23) -#define STEPCHARGE_RFM_XNUR STEPCHARGE_RFM(1) - -/* Charge delay */ -#define CHARGEDLY_OPEN_MASK (0x3FFFF << 0) -#define CHARGEDLY_OPEN(val) (val << 0) -#define CHARGEDLY_OPENDLY CHARGEDLY_OPEN(1) - -/* Control register */ -#define CNTRLREG_TSCSSENB BIT(0) -#define CNTRLREG_STEPID BIT(1) -#define CNTRLREG_STEPCONFIGWRT BIT(2) -#define CNTRLREG_AFE_CTRL_MASK (3 << 5) -#define CNTRLREG_AFE_CTRL(val) (val << 5) -#define CNTRLREG_4WIRE CNTRLREG_AFE_CTRL(1) -#define CNTRLREG_5WIRE CNTRLREG_AFE_CTRL(2) -#define CNTRLREG_8WIRE CNTRLREG_AFE_CTRL(3) -#define CNTRLREG_TSCENB BIT(7) - -#define ADCFSM_STEPID 0x10 -#define SEQ_SETTLE 275 -#define ADC_CLK 3000000 -#define MAX_12BIT ((1 << 12) - 1) - -struct tscadc { - struct input_dev *input; - struct clk *tsc_ick; - void __iomem *tsc_base; - unsigned int irq; - unsigned int wires; - unsigned int x_plate_resistance; - bool pen_down; - int steps_to_configure; -}; - -static unsigned int tscadc_readl(struct tscadc *ts, unsigned int reg) -{ - return readl(ts->tsc_base + reg); -} - -static void tscadc_writel(struct tscadc *tsc, unsigned int reg, - unsigned int val) -{ - writel(val, tsc->tsc_base + reg); -} - -static void tscadc_step_config(struct tscadc *ts_dev) -{ - unsigned int config; - int i, total_steps; - - /* Configure the Step registers */ - total_steps = 2 * ts_dev->steps_to_configure; - - config = STEPCONFIG_MODE_HWSYNC | - STEPCONFIG_AVG_16 | STEPCONFIG_XPP; - switch (ts_dev->wires) { - case 4: - config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN; - break; - case 5: - config |= STEPCONFIG_YNN | - STEPCONFIG_INP_AN4 | STEPCONFIG_XNN | - STEPCONFIG_YPP; - break; - case 8: - config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN; - break; - } - - for (i = 1; i <= ts_dev->steps_to_configure; i++) { - tscadc_writel(ts_dev, REG_STEPCONFIG(i), config); - tscadc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY); - } - - config = 0; - config = STEPCONFIG_MODE_HWSYNC | - STEPCONFIG_AVG_16 | STEPCONFIG_YNN | - STEPCONFIG_INM_ADCREFM | STEPCONFIG_FIFO1; - switch (ts_dev->wires) { - case 4: - config |= STEPCONFIG_YPP; - break; - case 5: - config |= STEPCONFIG_XPP | STEPCONFIG_INP_AN4 | - STEPCONFIG_XNP | STEPCONFIG_YPN; - break; - case 8: - config |= STEPCONFIG_YPP; - break; - } - - for (i = (ts_dev->steps_to_configure + 1); i <= total_steps; i++) { - tscadc_writel(ts_dev, REG_STEPCONFIG(i), config); - tscadc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY); - } - - config = 0; - /* Charge step configuration */ - config = STEPCONFIG_XPP | STEPCONFIG_YNN | - STEPCHARGE_RFP_XPUL | STEPCHARGE_RFM_XNUR | - STEPCHARGE_INM_AN1 | STEPCHARGE_INP_AN1; - - tscadc_writel(ts_dev, REG_CHARGECONFIG, config); - tscadc_writel(ts_dev, REG_CHARGEDELAY, CHARGEDLY_OPENDLY); - - config = 0; - /* Configure to calculate pressure */ - config = STEPCONFIG_MODE_HWSYNC | - STEPCONFIG_AVG_16 | STEPCONFIG_YPP | - STEPCONFIG_XNN | STEPCONFIG_INM_ADCREFM; - tscadc_writel(ts_dev, REG_STEPCONFIG(total_steps + 1), config); - tscadc_writel(ts_dev, REG_STEPDELAY(total_steps + 1), - STEPCONFIG_OPENDLY); - - config |= STEPCONFIG_INP_AN3 | STEPCONFIG_FIFO1; - tscadc_writel(ts_dev, REG_STEPCONFIG(total_steps + 2), config); - tscadc_writel(ts_dev, REG_STEPDELAY(total_steps + 2), - STEPCONFIG_OPENDLY); - - tscadc_writel(ts_dev, REG_SE, STPENB_STEPENB); -} - -static void tscadc_idle_config(struct tscadc *ts_config) -{ - unsigned int idleconfig; - - idleconfig = STEPCONFIG_YNN | - STEPCONFIG_INM_ADCREFM | - STEPCONFIG_YPN | STEPCONFIG_INP_ADCREFM; - tscadc_writel(ts_config, REG_IDLECONFIG, idleconfig); -} - -static void tscadc_read_coordinates(struct tscadc *ts_dev, - unsigned int *x, unsigned int *y) -{ - unsigned int fifocount = tscadc_readl(ts_dev, REG_FIFO0CNT); - unsigned int prev_val_x = ~0, prev_val_y = ~0; - unsigned int prev_diff_x = ~0, prev_diff_y = ~0; - unsigned int read, diff; - unsigned int i; - - /* - * Delta filter is used to remove large variations in sampled - * values from ADC. The filter tries to predict where the next - * coordinate could be. This is done by taking a previous - * coordinate and subtracting it form current one. Further the - * algorithm compares the difference with that of a present value, - * if true the value is reported to the sub system. - */ - for (i = 0; i < fifocount - 1; i++) { - read = tscadc_readl(ts_dev, REG_FIFO0) & 0xfff; - diff = abs(read - prev_val_x); - if (diff < prev_diff_x) { - prev_diff_x = diff; - *x = read; - } - prev_val_x = read; - - read = tscadc_readl(ts_dev, REG_FIFO1) & 0xfff; - diff = abs(read - prev_val_y); - if (diff < prev_diff_y) { - prev_diff_y = diff; - *y = read; - } - prev_val_y = read; - } -} - -static irqreturn_t tscadc_irq(int irq, void *dev) -{ - struct tscadc *ts_dev = dev; - struct input_dev *input_dev = ts_dev->input; - unsigned int status, irqclr = 0; - unsigned int x = 0, y = 0; - unsigned int z1, z2, z; - unsigned int fsm; - - status = tscadc_readl(ts_dev, REG_IRQSTATUS); - if (status & IRQENB_FIFO0THRES) { - tscadc_read_coordinates(ts_dev, &x, &y); - - z1 = tscadc_readl(ts_dev, REG_FIFO0) & 0xfff; - z2 = tscadc_readl(ts_dev, REG_FIFO1) & 0xfff; - - if (ts_dev->pen_down && z1 != 0 && z2 != 0) { - /* - * Calculate pressure using formula - * Resistance(touch) = x plate resistance * - * x postion/4096 * ((z2 / z1) - 1) - */ - z = z2 - z1; - z *= x; - z *= ts_dev->x_plate_resistance; - z /= z1; - z = (z + 2047) >> 12; - - if (z <= MAX_12BIT) { - input_report_abs(input_dev, ABS_X, x); - input_report_abs(input_dev, ABS_Y, y); - input_report_abs(input_dev, ABS_PRESSURE, z); - input_report_key(input_dev, BTN_TOUCH, 1); - input_sync(input_dev); - } - } - irqclr |= IRQENB_FIFO0THRES; - } - - /* - * Time for sequencer to settle, to read - * correct state of the sequencer. - */ - udelay(SEQ_SETTLE); - - status = tscadc_readl(ts_dev, REG_RAWIRQSTATUS); - if (status & IRQENB_PENUP) { - /* Pen up event */ - fsm = tscadc_readl(ts_dev, REG_ADCFSM); - if (fsm == ADCFSM_STEPID) { - ts_dev->pen_down = false; - input_report_key(input_dev, BTN_TOUCH, 0); - input_report_abs(input_dev, ABS_PRESSURE, 0); - input_sync(input_dev); - } else { - ts_dev->pen_down = true; - } - irqclr |= IRQENB_PENUP; - } - - tscadc_writel(ts_dev, REG_IRQSTATUS, irqclr); - - tscadc_writel(ts_dev, REG_SE, STPENB_STEPENB); - return IRQ_HANDLED; -} - -/* - * The functions for inserting/removing driver as a module. - */ - -static int __devinit tscadc_probe(struct platform_device *pdev) -{ - const struct tsc_data *pdata = pdev->dev.platform_data; - struct resource *res; - struct tscadc *ts_dev; - struct input_dev *input_dev; - struct clk *clk; - int err; - int clk_value, ctrl, irq; - - if (!pdata) { - dev_err(&pdev->dev, "missing platform data.\n"); - return -EINVAL; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "no memory resource defined.\n"); - return -EINVAL; - } - - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "no irq ID is specified.\n"); - return -EINVAL; - } - - /* Allocate memory for device */ - ts_dev = kzalloc(sizeof(struct tscadc), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!ts_dev || !input_dev) { - dev_err(&pdev->dev, "failed to allocate memory.\n"); - err = -ENOMEM; - goto err_free_mem; - } - - ts_dev->input = input_dev; - ts_dev->irq = irq; - ts_dev->wires = pdata->wires; - ts_dev->x_plate_resistance = pdata->x_plate_resistance; - ts_dev->steps_to_configure = pdata->steps_to_configure; - - res = request_mem_region(res->start, resource_size(res), pdev->name); - if (!res) { - dev_err(&pdev->dev, "failed to reserve registers.\n"); - err = -EBUSY; - goto err_free_mem; - } - - ts_dev->tsc_base = ioremap(res->start, resource_size(res)); - if (!ts_dev->tsc_base) { - dev_err(&pdev->dev, "failed to map registers.\n"); - err = -ENOMEM; - goto err_release_mem_region; - } - - err = request_irq(ts_dev->irq, tscadc_irq, - 0, pdev->dev.driver->name, ts_dev); - if (err) { - dev_err(&pdev->dev, "failed to allocate irq.\n"); - goto err_unmap_regs; - } - - ts_dev->tsc_ick = clk_get(&pdev->dev, "adc_tsc_ick"); - if (IS_ERR(ts_dev->tsc_ick)) { - dev_err(&pdev->dev, "failed to get TSC ick\n"); - goto err_free_irq; - } - clk_enable(ts_dev->tsc_ick); - - clk = clk_get(&pdev->dev, "adc_tsc_fck"); - if (IS_ERR(clk)) { - dev_err(&pdev->dev, "failed to get TSC fck\n"); - err = PTR_ERR(clk); - goto err_disable_clk; - } - - clk_value = clk_get_rate(clk) / ADC_CLK; - clk_put(clk); - - if (clk_value < 7) { - dev_err(&pdev->dev, "clock input less than min clock requirement\n"); - goto err_disable_clk; - } - /* CLKDIV needs to be configured to the value minus 1 */ - tscadc_writel(ts_dev, REG_CLKDIV, clk_value - 1); - - /* Enable wake-up of the SoC using touchscreen */ - tscadc_writel(ts_dev, REG_IRQWAKEUP, IRQWKUP_ENB); - - ctrl = CNTRLREG_STEPCONFIGWRT | - CNTRLREG_TSCENB | - CNTRLREG_STEPID; - switch (ts_dev->wires) { - case 4: - ctrl |= CNTRLREG_4WIRE; - break; - case 5: - ctrl |= CNTRLREG_5WIRE; - break; - case 8: - ctrl |= CNTRLREG_8WIRE; - break; - } - tscadc_writel(ts_dev, REG_CTRL, ctrl); - - tscadc_idle_config(ts_dev); - tscadc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES); - tscadc_step_config(ts_dev); - tscadc_writel(ts_dev, REG_FIFO0THR, ts_dev->steps_to_configure); - - ctrl |= CNTRLREG_TSCSSENB; - tscadc_writel(ts_dev, REG_CTRL, ctrl); - - input_dev->name = "ti-tsc-adc"; - input_dev->dev.parent = &pdev->dev; - - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); - - input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0); - input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0); - input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0); - - /* register to the input system */ - err = input_register_device(input_dev); - if (err) - goto err_disable_clk; - - platform_set_drvdata(pdev, ts_dev); - return 0; - -err_disable_clk: - clk_disable(ts_dev->tsc_ick); - clk_put(ts_dev->tsc_ick); -err_free_irq: - free_irq(ts_dev->irq, ts_dev); -err_unmap_regs: - iounmap(ts_dev->tsc_base); -err_release_mem_region: - release_mem_region(res->start, resource_size(res)); -err_free_mem: - input_free_device(input_dev); - kfree(ts_dev); - return err; -} - -static int __devexit tscadc_remove(struct platform_device *pdev) -{ - struct tscadc *ts_dev = platform_get_drvdata(pdev); - struct resource *res; - - free_irq(ts_dev->irq, ts_dev); - - input_unregister_device(ts_dev->input); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - iounmap(ts_dev->tsc_base); - release_mem_region(res->start, resource_size(res)); - - clk_disable(ts_dev->tsc_ick); - clk_put(ts_dev->tsc_ick); - - kfree(ts_dev); - - platform_set_drvdata(pdev, NULL); - return 0; -} - -static struct platform_driver ti_tsc_driver = { - .probe = tscadc_probe, - .remove = __devexit_p(tscadc_remove), - .driver = { - .name = "tsc", - .owner = THIS_MODULE, - }, -}; -module_platform_driver(ti_tsc_driver); - -MODULE_DESCRIPTION("TI touchscreen controller driver"); -MODULE_AUTHOR("Rachna Patil "); -MODULE_LICENSE("GPL"); diff --git a/include/linux/input/ti_am335x_tsc.h b/include/linux/input/ti_am335x_tsc.h new file mode 100644 index 000000000000..49269a2aa329 --- /dev/null +++ b/include/linux/input/ti_am335x_tsc.h @@ -0,0 +1,23 @@ +#ifndef __LINUX_TI_AM335X_TSC_H +#define __LINUX_TI_AM335X_TSC_H + +/** + * struct tsc_data Touchscreen wire configuration + * @wires: Wires refer to application modes + * i.e. 4/5/8 wire touchscreen support + * on the platform. + * @x_plate_resistance: X plate resistance. + * @steps_to_configure: The sequencer supports a total of + * 16 programmable steps. + * A step configured to read a single + * co-ordinate value, can be applied + * more number of times for better results. + */ + +struct tsc_data { + int wires; + int x_plate_resistance; + int steps_to_configure; +}; + +#endif diff --git a/include/linux/input/ti_tscadc.h b/include/linux/input/ti_tscadc.h deleted file mode 100644 index ad442a3eb68b..000000000000 --- a/include/linux/input/ti_tscadc.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef __LINUX_TI_TSCADC_H -#define __LINUX_TI_TSCADC_H - -/** - * struct tsc_data Touchscreen wire configuration - * @wires: Wires refer to application modes - * i.e. 4/5/8 wire touchscreen support - * on the platform. - * @x_plate_resistance: X plate resistance. - * @steps_to_configure: The sequencer supports a total of - * 16 programmable steps. - * A step configured to read a single - * co-ordinate value, can be applied - * more number of times for better results. - */ - -struct tsc_data { - int wires; - int x_plate_resistance; - int steps_to_configure; -}; - -#endif -- cgit v1.2.3 From 2b99bafab19145a72e2c557326fc4662a864a162 Mon Sep 17 00:00:00 2001 From: "Patil, Rachna" Date: Tue, 16 Oct 2012 12:55:44 +0530 Subject: input: TSC: ti_tsc: Convert TSC into a MFDevice This patch converts touchscreen into a MFD client. All the register definitions, clock initialization, etc has been moved to MFD core driver. Signed-off-by: Patil, Rachna Signed-off-by: Samuel Ortiz --- drivers/input/touchscreen/Kconfig | 2 +- drivers/input/touchscreen/ti_am335x_tsc.c | 318 +++++++++--------------------- drivers/mfd/ti_am335x_tscadc.c | 11 ++ include/linux/mfd/ti_am335x_tscadc.h | 10 +- 4 files changed, 118 insertions(+), 223 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index d31dc5faeaaf..0c45caddd41c 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -531,7 +531,7 @@ config TOUCHSCREEN_TOUCHWIN config TOUCHSCREEN_TI_AM335X_TSC tristate "TI Touchscreen Interface" - depends on ARCH_OMAP2PLUS + depends on MFD_TI_AM335X_TSCADC help Say Y here if you have 4/5/8 wire touchscreen controller to be connected to the ADC controller on your TI AM335x SoC. diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c index 462950acb97b..7a18a8a15228 100644 --- a/drivers/input/touchscreen/ti_am335x_tsc.c +++ b/drivers/input/touchscreen/ti_am335x_tsc.c @@ -27,106 +27,15 @@ #include #include -#define REG_RAWIRQSTATUS 0x024 -#define REG_IRQSTATUS 0x028 -#define REG_IRQENABLE 0x02C -#define REG_IRQWAKEUP 0x034 -#define REG_CTRL 0x040 -#define REG_ADCFSM 0x044 -#define REG_CLKDIV 0x04C -#define REG_SE 0x054 -#define REG_IDLECONFIG 0x058 -#define REG_CHARGECONFIG 0x05C -#define REG_CHARGEDELAY 0x060 -#define REG_STEPCONFIG(n) (0x64 + ((n - 1) * 8)) -#define REG_STEPDELAY(n) (0x68 + ((n - 1) * 8)) -#define REG_FIFO0CNT 0xE4 -#define REG_FIFO0THR 0xE8 -#define REG_FIFO1THR 0xF4 -#define REG_FIFO0 0x100 -#define REG_FIFO1 0x200 - -/* Register Bitfields */ -#define IRQWKUP_ENB BIT(0) - -/* Step Enable */ -#define STEPENB_MASK (0x1FFFF << 0) -#define STEPENB(val) (val << 0) -#define STPENB_STEPENB STEPENB(0x7FFF) - -/* IRQ enable */ -#define IRQENB_FIFO0THRES BIT(2) -#define IRQENB_FIFO1THRES BIT(5) -#define IRQENB_PENUP BIT(9) - -/* Step Configuration */ -#define STEPCONFIG_MODE_MASK (3 << 0) -#define STEPCONFIG_MODE(val) (val << 0) -#define STEPCONFIG_MODE_HWSYNC STEPCONFIG_MODE(2) -#define STEPCONFIG_AVG_MASK (7 << 2) -#define STEPCONFIG_AVG(val) (val << 2) -#define STEPCONFIG_AVG_16 STEPCONFIG_AVG(4) -#define STEPCONFIG_XPP BIT(5) -#define STEPCONFIG_XNN BIT(6) -#define STEPCONFIG_YPP BIT(7) -#define STEPCONFIG_YNN BIT(8) -#define STEPCONFIG_XNP BIT(9) -#define STEPCONFIG_YPN BIT(10) -#define STEPCONFIG_INM_MASK (0xF << 15) -#define STEPCONFIG_INM(val) (val << 15) -#define STEPCONFIG_INM_ADCREFM STEPCONFIG_INM(8) -#define STEPCONFIG_INP_MASK (0xF << 19) -#define STEPCONFIG_INP(val) (val << 19) -#define STEPCONFIG_INP_AN2 STEPCONFIG_INP(2) -#define STEPCONFIG_INP_AN3 STEPCONFIG_INP(3) -#define STEPCONFIG_INP_AN4 STEPCONFIG_INP(4) -#define STEPCONFIG_INP_ADCREFM STEPCONFIG_INP(8) -#define STEPCONFIG_FIFO1 BIT(26) - -/* Delay register */ -#define STEPDELAY_OPEN_MASK (0x3FFFF << 0) -#define STEPDELAY_OPEN(val) (val << 0) -#define STEPCONFIG_OPENDLY STEPDELAY_OPEN(0x098) - -/* Charge Config */ -#define STEPCHARGE_RFP_MASK (7 << 12) -#define STEPCHARGE_RFP(val) (val << 12) -#define STEPCHARGE_RFP_XPUL STEPCHARGE_RFP(1) -#define STEPCHARGE_INM_MASK (0xF << 15) -#define STEPCHARGE_INM(val) (val << 15) -#define STEPCHARGE_INM_AN1 STEPCHARGE_INM(1) -#define STEPCHARGE_INP_MASK (0xF << 19) -#define STEPCHARGE_INP(val) (val << 19) -#define STEPCHARGE_INP_AN1 STEPCHARGE_INP(1) -#define STEPCHARGE_RFM_MASK (3 << 23) -#define STEPCHARGE_RFM(val) (val << 23) -#define STEPCHARGE_RFM_XNUR STEPCHARGE_RFM(1) - -/* Charge delay */ -#define CHARGEDLY_OPEN_MASK (0x3FFFF << 0) -#define CHARGEDLY_OPEN(val) (val << 0) -#define CHARGEDLY_OPENDLY CHARGEDLY_OPEN(1) - -/* Control register */ -#define CNTRLREG_TSCSSENB BIT(0) -#define CNTRLREG_STEPID BIT(1) -#define CNTRLREG_STEPCONFIGWRT BIT(2) -#define CNTRLREG_AFE_CTRL_MASK (3 << 5) -#define CNTRLREG_AFE_CTRL(val) (val << 5) -#define CNTRLREG_4WIRE CNTRLREG_AFE_CTRL(1) -#define CNTRLREG_5WIRE CNTRLREG_AFE_CTRL(2) -#define CNTRLREG_8WIRE CNTRLREG_AFE_CTRL(3) -#define CNTRLREG_TSCENB BIT(7) +#include #define ADCFSM_STEPID 0x10 #define SEQ_SETTLE 275 -#define ADC_CLK 3000000 #define MAX_12BIT ((1 << 12) - 1) struct titsc { struct input_dev *input; - struct clk *tsc_ick; - void __iomem *tsc_base; + struct ti_tscadc_dev *mfd_tscadc; unsigned int irq; unsigned int wires; unsigned int x_plate_resistance; @@ -136,13 +45,13 @@ struct titsc { static unsigned int titsc_readl(struct titsc *ts, unsigned int reg) { - return readl(ts->tsc_base + reg); + return readl(ts->mfd_tscadc->tscadc_base + reg); } static void titsc_writel(struct titsc *tsc, unsigned int reg, unsigned int val) { - writel(val, tsc->tsc_base + reg); + writel(val, tsc->mfd_tscadc->tscadc_base + reg); } static void titsc_step_config(struct titsc *ts_dev) @@ -219,17 +128,7 @@ static void titsc_step_config(struct titsc *ts_dev) titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 2), STEPCONFIG_OPENDLY); - titsc_writel(ts_dev, REG_SE, STPENB_STEPENB); -} - -static void titsc_idle_config(struct titsc *ts_config) -{ - unsigned int idleconfig; - - idleconfig = STEPCONFIG_YNN | - STEPCONFIG_INM_ADCREFM | - STEPCONFIG_YPN | STEPCONFIG_INP_ADCREFM; - titsc_writel(ts_config, REG_IDLECONFIG, idleconfig); + titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC); } static void titsc_read_coordinates(struct titsc *ts_dev, @@ -239,7 +138,7 @@ static void titsc_read_coordinates(struct titsc *ts_dev, unsigned int prev_val_x = ~0, prev_val_y = ~0; unsigned int prev_diff_x = ~0, prev_diff_y = ~0; unsigned int read, diff; - unsigned int i; + unsigned int i, channel; /* * Delta filter is used to remove large variations in sampled @@ -250,21 +149,32 @@ static void titsc_read_coordinates(struct titsc *ts_dev, * if true the value is reported to the sub system. */ for (i = 0; i < fifocount - 1; i++) { - read = titsc_readl(ts_dev, REG_FIFO0) & 0xfff; - diff = abs(read - prev_val_x); - if (diff < prev_diff_x) { - prev_diff_x = diff; - *x = read; + read = titsc_readl(ts_dev, REG_FIFO0); + channel = read & 0xf0000; + channel = channel >> 0x10; + if ((channel >= 0) && (channel < ts_dev->steps_to_configure)) { + read &= 0xfff; + diff = abs(read - prev_val_x); + if (diff < prev_diff_x) { + prev_diff_x = diff; + *x = read; + } + prev_val_x = read; } - prev_val_x = read; - read = titsc_readl(ts_dev, REG_FIFO1) & 0xfff; - diff = abs(read - prev_val_y); - if (diff < prev_diff_y) { - prev_diff_y = diff; - *y = read; + read = titsc_readl(ts_dev, REG_FIFO1); + channel = read & 0xf0000; + channel = channel >> 0x10; + if ((channel >= ts_dev->steps_to_configure) && + (channel < (2 * ts_dev->steps_to_configure - 1))) { + read &= 0xfff; + diff = abs(read - prev_val_y); + if (diff < prev_diff_y) { + prev_diff_y = diff; + *y = read; + } + prev_val_y = read; } - prev_val_y = read; } } @@ -276,6 +186,8 @@ static irqreturn_t titsc_irq(int irq, void *dev) unsigned int x = 0, y = 0; unsigned int z1, z2, z; unsigned int fsm; + unsigned int fifo1count, fifo0count; + int i; status = titsc_readl(ts_dev, REG_IRQSTATUS); if (status & IRQENB_FIFO0THRES) { @@ -284,6 +196,14 @@ static irqreturn_t titsc_irq(int irq, void *dev) z1 = titsc_readl(ts_dev, REG_FIFO0) & 0xfff; z2 = titsc_readl(ts_dev, REG_FIFO1) & 0xfff; + fifo1count = titsc_readl(ts_dev, REG_FIFO1CNT); + for (i = 0; i < fifo1count; i++) + titsc_readl(ts_dev, REG_FIFO1); + + fifo0count = titsc_readl(ts_dev, REG_FIFO0CNT); + for (i = 0; i < fifo0count; i++) + titsc_readl(ts_dev, REG_FIFO0); + if (ts_dev->pen_down && z1 != 0 && z2 != 0) { /* * Calculate pressure using formula @@ -330,7 +250,7 @@ static irqreturn_t titsc_irq(int irq, void *dev) titsc_writel(ts_dev, REG_IRQSTATUS, irqclr); - titsc_writel(ts_dev, REG_SE, STPENB_STEPENB); + titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC); return IRQ_HANDLED; } @@ -340,28 +260,16 @@ static irqreturn_t titsc_irq(int irq, void *dev) static int __devinit titsc_probe(struct platform_device *pdev) { - const struct tsc_data *pdata = pdev->dev.platform_data; - struct resource *res; struct titsc *ts_dev; struct input_dev *input_dev; - struct clk *clk; + struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data; + struct mfd_tscadc_board *pdata; int err; - int clk_value, ctrl, irq; - if (!pdata) { - dev_err(&pdev->dev, "missing platform data.\n"); - return -EINVAL; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "no memory resource defined.\n"); - return -EINVAL; - } + pdata = tscadc_dev->dev->platform_data; - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "no irq ID is specified.\n"); + if (!pdata) { + dev_err(&pdev->dev, "Could not find platform data\n"); return -EINVAL; } @@ -374,85 +282,26 @@ static int __devinit titsc_probe(struct platform_device *pdev) goto err_free_mem; } + tscadc_dev->tsc = ts_dev; + ts_dev->mfd_tscadc = tscadc_dev; ts_dev->input = input_dev; - ts_dev->irq = irq; - ts_dev->wires = pdata->wires; - ts_dev->x_plate_resistance = pdata->x_plate_resistance; - ts_dev->steps_to_configure = pdata->steps_to_configure; - - res = request_mem_region(res->start, resource_size(res), pdev->name); - if (!res) { - dev_err(&pdev->dev, "failed to reserve registers.\n"); - err = -EBUSY; - goto err_free_mem; - } - - ts_dev->tsc_base = ioremap(res->start, resource_size(res)); - if (!ts_dev->tsc_base) { - dev_err(&pdev->dev, "failed to map registers.\n"); - err = -ENOMEM; - goto err_release_mem_region; - } + ts_dev->irq = tscadc_dev->irq; + ts_dev->wires = pdata->tsc_init->wires; + ts_dev->x_plate_resistance = pdata->tsc_init->x_plate_resistance; + ts_dev->steps_to_configure = pdata->tsc_init->steps_to_configure; err = request_irq(ts_dev->irq, titsc_irq, 0, pdev->dev.driver->name, ts_dev); if (err) { dev_err(&pdev->dev, "failed to allocate irq.\n"); - goto err_unmap_regs; - } - - ts_dev->tsc_ick = clk_get(&pdev->dev, "adc_tsc_ick"); - if (IS_ERR(ts_dev->tsc_ick)) { - dev_err(&pdev->dev, "failed to get TSC ick\n"); - goto err_free_irq; - } - clk_enable(ts_dev->tsc_ick); - - clk = clk_get(&pdev->dev, "adc_tsc_fck"); - if (IS_ERR(clk)) { - dev_err(&pdev->dev, "failed to get TSC fck\n"); - err = PTR_ERR(clk); - goto err_disable_clk; - } - - clk_value = clk_get_rate(clk) / ADC_CLK; - clk_put(clk); - - if (clk_value < 7) { - dev_err(&pdev->dev, "clock input less than min clock requirement\n"); - goto err_disable_clk; - } - /* CLKDIV needs to be configured to the value minus 1 */ - titsc_writel(ts_dev, REG_CLKDIV, clk_value - 1); - - /* Enable wake-up of the SoC using touchscreen */ - titsc_writel(ts_dev, REG_IRQWAKEUP, IRQWKUP_ENB); - - ctrl = CNTRLREG_STEPCONFIGWRT | - CNTRLREG_TSCENB | - CNTRLREG_STEPID; - switch (ts_dev->wires) { - case 4: - ctrl |= CNTRLREG_4WIRE; - break; - case 5: - ctrl |= CNTRLREG_5WIRE; - break; - case 8: - ctrl |= CNTRLREG_8WIRE; - break; + goto err_free_mem; } - titsc_writel(ts_dev, REG_CTRL, ctrl); - titsc_idle_config(ts_dev); titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES); titsc_step_config(ts_dev); titsc_writel(ts_dev, REG_FIFO0THR, ts_dev->steps_to_configure); - ctrl |= CNTRLREG_TSCSSENB; - titsc_writel(ts_dev, REG_CTRL, ctrl); - - input_dev->name = "ti-tsc-adc"; + input_dev->name = "ti-tsc"; input_dev->dev.parent = &pdev->dev; input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); @@ -465,20 +314,13 @@ static int __devinit titsc_probe(struct platform_device *pdev) /* register to the input system */ err = input_register_device(input_dev); if (err) - goto err_disable_clk; + goto err_free_irq; platform_set_drvdata(pdev, ts_dev); return 0; -err_disable_clk: - clk_disable(ts_dev->tsc_ick); - clk_put(ts_dev->tsc_ick); err_free_irq: free_irq(ts_dev->irq, ts_dev); -err_unmap_regs: - iounmap(ts_dev->tsc_base); -err_release_mem_region: - release_mem_region(res->start, resource_size(res)); err_free_mem: input_free_device(input_dev); kfree(ts_dev); @@ -487,32 +329,66 @@ err_free_mem: static int __devexit titsc_remove(struct platform_device *pdev) { - struct titsc *ts_dev = platform_get_drvdata(pdev); - struct resource *res; + struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data; + struct titsc *ts_dev = tscadc_dev->tsc; free_irq(ts_dev->irq, ts_dev); input_unregister_device(ts_dev->input); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - iounmap(ts_dev->tsc_base); - release_mem_region(res->start, resource_size(res)); + platform_set_drvdata(pdev, NULL); + kfree(ts_dev); + return 0; +} - clk_disable(ts_dev->tsc_ick); - clk_put(ts_dev->tsc_ick); +#ifdef CONFIG_PM +static int titsc_suspend(struct device *dev) +{ + struct ti_tscadc_dev *tscadc_dev = dev->platform_data; + struct titsc *ts_dev = tscadc_dev->tsc; + unsigned int idle; + + if (device_may_wakeup(tscadc_dev->dev)) { + idle = titsc_readl(ts_dev, REG_IRQENABLE); + titsc_writel(ts_dev, REG_IRQENABLE, + (idle | IRQENB_HW_PEN)); + titsc_writel(ts_dev, REG_IRQWAKEUP, IRQWKUP_ENB); + } + return 0; +} - kfree(ts_dev); +static int titsc_resume(struct device *dev) +{ + struct ti_tscadc_dev *tscadc_dev = dev->platform_data; + struct titsc *ts_dev = tscadc_dev->tsc; - platform_set_drvdata(pdev, NULL); + if (device_may_wakeup(tscadc_dev->dev)) { + titsc_writel(ts_dev, REG_IRQWAKEUP, + 0x00); + titsc_writel(ts_dev, REG_IRQCLR, IRQENB_HW_PEN); + } + titsc_step_config(ts_dev); + titsc_writel(ts_dev, REG_FIFO0THR, + ts_dev->steps_to_configure); return 0; } +static const struct dev_pm_ops titsc_pm_ops = { + .suspend = titsc_suspend, + .resume = titsc_resume, +}; +#define TITSC_PM_OPS (&titsc_pm_ops) +#else +#define TITSC_PM_OPS NULL +#endif + static struct platform_driver ti_tsc_driver = { .probe = titsc_probe, .remove = __devexit_p(titsc_remove), .driver = { .name = "tsc", .owner = THIS_MODULE, + .pm = TITSC_PM_OPS, }, }; module_platform_driver(ti_tsc_driver); diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c index 14df67bc390f..d812be4b61df 100644 --- a/drivers/mfd/ti_am335x_tscadc.c +++ b/drivers/mfd/ti_am335x_tscadc.c @@ -24,6 +24,7 @@ #include #include +#include static unsigned int tscadc_readl(struct ti_tscadc_dev *tsadc, unsigned int reg) { @@ -62,15 +63,19 @@ static int __devinit ti_tscadc_probe(struct platform_device *pdev) struct resource *res; struct clk *clk; struct mfd_tscadc_board *pdata = pdev->dev.platform_data; + struct mfd_cell *cell; int irq; int err, ctrl; int clk_value, clock_rate; + int tsc_wires; if (!pdata) { dev_err(&pdev->dev, "Could not find platform data\n"); return -EINVAL; } + tsc_wires = pdata->tsc_init->wires; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(&pdev->dev, "no memory resource defined.\n"); @@ -161,6 +166,12 @@ static int __devinit ti_tscadc_probe(struct platform_device *pdev) ctrl |= CNTRLREG_TSCSSENB; tscadc_writel(tscadc, REG_CTRL, ctrl); + /* TSC Cell */ + cell = &tscadc->cells[TSC_CELL]; + cell->name = "tsc"; + cell->platform_data = tscadc; + cell->pdata_size = sizeof(*tscadc); + err = mfd_add_devices(&pdev->dev, pdev->id, tscadc->cells, TSCADC_CELLS, NULL, 0, NULL); if (err < 0) diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h index b7232b157061..fc18b2ef753f 100644 --- a/include/linux/mfd/ti_am335x_tscadc.h +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -47,6 +47,7 @@ #define STEPENB_MASK (0x1FFFF << 0) #define STEPENB(val) ((val) << 0) #define STPENB_STEPENB STEPENB(0x1FFFF) +#define STPENB_STEPENB_TC STEPENB(0x1FFF) /* IRQ enable */ #define IRQENB_HW_PEN BIT(0) @@ -120,7 +121,11 @@ #define ADC_CLK 3000000 #define MAX_CLK_DIV 7 -#define TSCADC_CELLS 0 +#define TSCADC_CELLS 1 + +enum tscadc_cells { + TSC_CELL, +}; struct mfd_tscadc_board { struct tsc_data *tsc_init; @@ -132,6 +137,9 @@ struct ti_tscadc_dev { void __iomem *tscadc_base; int irq; struct mfd_cell cells[TSCADC_CELLS]; + + /* tsc device */ + struct titsc *tsc; }; #endif -- cgit v1.2.3 From bcd2360c1ff9fff69eb45bedc5fba7240c6da875 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Tue, 30 Oct 2012 05:12:23 +0800 Subject: arm: at91: move platfarm_data to include/linux/platform_data/atmel.h Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre --- arch/arm/mach-at91/include/mach/board.h | 55 ----------------------- arch/avr32/mach-at32ap/include/mach/board.h | 7 --- drivers/ata/pata_at91.c | 2 +- drivers/input/touchscreen/atmel_tsadcc.c | 2 +- drivers/mmc/host/atmel-mci.c | 2 +- drivers/net/can/at91_can.c | 3 +- drivers/net/ethernet/cadence/at91_ether.c | 2 +- drivers/pcmcia/at91_cf.c | 2 +- drivers/rtc/rtc-at91sam9.c | 2 +- drivers/spi/spi-atmel.c | 2 +- drivers/tty/serial/atmel_serial.c | 2 +- drivers/usb/gadget/at91_udc.c | 2 +- drivers/usb/gadget/atmel_usba_udc.c | 2 +- drivers/usb/host/ohci-at91.c | 2 +- drivers/video/atmel_lcdfb.c | 2 +- include/linux/platform_data/atmel.h | 67 +++++++++++++++++++++++++++++ 16 files changed, 80 insertions(+), 76 deletions(-) (limited to 'drivers/input') diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index c55a4364ffb4..662451d85fc9 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -31,42 +31,15 @@ #ifndef __ASM_ARCH_BOARD_H #define __ASM_ARCH_BOARD_H -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include #include /* USB Device */ -struct at91_udc_data { - int vbus_pin; /* high == host powering us */ - u8 vbus_active_low; /* vbus polarity */ - u8 vbus_polled; /* Use polling, not interrupt */ - int pullup_pin; /* active == D+ pulled up */ - u8 pullup_active_low; /* true == pullup_pin is active low */ -}; extern void __init at91_add_device_udc(struct at91_udc_data *data); /* USB High Speed Device */ extern void __init at91_add_device_usba(struct usba_platform_data *data); /* Compact Flash */ -struct at91_cf_data { - int irq_pin; /* I/O IRQ */ - int det_pin; /* Card detect */ - int vcc_pin; /* power switching */ - int rst_pin; /* card reset */ - u8 chipselect; /* EBI Chip Select number */ - u8 flags; -#define AT91_CF_TRUE_IDE 0x01 -#define AT91_IDE_SWAP_A0_A2 0x02 -}; extern void __init at91_add_device_cf(struct at91_cf_data *data); /* MMC / SD */ @@ -86,16 +59,6 @@ extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *d extern void __init at91_add_device_eth(struct macb_platform_data *data); /* USB Host */ -#define AT91_MAX_USBH_PORTS 3 -struct at91_usbh_data { - int vbus_pin[AT91_MAX_USBH_PORTS]; /* port power-control pin */ - int overcurrent_pin[AT91_MAX_USBH_PORTS]; - u8 ports; /* number of ports on root hub */ - u8 overcurrent_supported; - u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS]; - u8 overcurrent_status[AT91_MAX_USBH_PORTS]; - u8 overcurrent_changed[AT91_MAX_USBH_PORTS]; -}; extern void __init at91_add_device_usbh(struct at91_usbh_data *data); extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data); extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data); @@ -124,13 +87,6 @@ extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pin extern struct platform_device *atmel_default_console_device; -struct atmel_uart_data { - int num; /* port num */ - short use_dma_tx; /* use transmit DMA? */ - short use_dma_rx; /* use receive DMA? */ - void __iomem *regs; /* virt. base address, if any */ - struct serial_rs485 rs485; /* rs485 settings */ -}; extern void __init at91_add_device_serial(void); /* @@ -173,24 +129,13 @@ extern void __init at91_add_device_isi(struct isi_platform_data *data, bool use_pck_as_mck); /* Touchscreen Controller */ -struct at91_tsadcc_data { - unsigned int adc_clock; - u8 pendet_debounce; - u8 ts_sample_hold_time; -}; extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data); /* CAN */ -struct at91_can_data { - void (*transceiver_switch)(int on); -}; extern void __init at91_add_device_can(struct at91_can_data *data); /* LEDs */ extern void __init at91_gpio_leds(struct gpio_led *leds, int nr); extern void __init at91_pwm_leds(struct gpio_led *leds, int nr); -/* FIXME: this needs a better location, but gets stuff building again */ -extern int at91_suspend_entering_slow_clock(void); - #endif diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h index 70742ec997f8..dca93450cb0e 100644 --- a/arch/avr32/mach-at32ap/include/mach/board.h +++ b/arch/avr32/mach-at32ap/include/mach/board.h @@ -34,13 +34,6 @@ extern struct platform_device *atmel_default_console_device; #define ATMEL_USART_CTS 0x02 #define ATMEL_USART_CLK 0x04 -struct atmel_uart_data { - int num; /* port num */ - short use_dma_tx; /* use transmit DMA? */ - short use_dma_rx; /* use receive DMA? */ - void __iomem *regs; /* virtual base address, if any */ - struct serial_rs485 rs485; /* rs485 settings */ -}; void at32_map_usart(unsigned int hw_id, unsigned int line, int flags); struct platform_device *at32_add_device_usart(unsigned int id); diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c index 53d3770a0b1b..2a96bb2c53ee 100644 --- a/drivers/ata/pata_at91.c +++ b/drivers/ata/pata_at91.c @@ -27,9 +27,9 @@ #include #include #include +#include #include -#include #include #define DRV_NAME "pata_at91" diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c index 201b2d2ec1b3..ea392ee138ed 100644 --- a/drivers/input/touchscreen/atmel_tsadcc.c +++ b/drivers/input/touchscreen/atmel_tsadcc.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include #include /* Register definitions based on AT91SAM9RL64 preliminary draft datasheet */ diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index ddf096e3803f..868998925826 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -40,7 +41,6 @@ #include #include -#include #include "atmel-mci-regs.h" diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c index fcff73a73b1d..994b6acd65f4 100644 --- a/drivers/net/can/at91_can.c +++ b/drivers/net/can/at91_can.c @@ -33,12 +33,11 @@ #include #include #include +#include #include #include -#include - #define AT91_MB_MASK(i) ((1 << (i)) - 1) /* Common registers */ diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c index 4e980a7886fb..35fc6edbacf8 100644 --- a/drivers/net/ethernet/cadence/at91_ether.c +++ b/drivers/net/ethernet/cadence/at91_ether.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include @@ -38,7 +39,6 @@ #include #include -#include #include "at91_ether.h" diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c index 9694c1e783a5..01463c781847 100644 --- a/drivers/pcmcia/at91_cf.c +++ b/drivers/pcmcia/at91_cf.c @@ -17,6 +17,7 @@ #include #include #include +#include #include @@ -24,7 +25,6 @@ #include #include -#include #include #include diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c index 2dfe7a2fb998..e981798e9a9b 100644 --- a/drivers/rtc/rtc-at91sam9.c +++ b/drivers/rtc/rtc-at91sam9.c @@ -19,8 +19,8 @@ #include #include #include +#include -#include #include #include diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 16d6a839c7fa..61fb0ec26f06 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -19,9 +19,9 @@ #include #include #include +#include #include -#include #include #include diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 3d7e1ee2fa57..5660ec2618a3 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -39,12 +39,12 @@ #include #include #include +#include #include #include #include -#include #ifdef CONFIG_ARM #include diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 89d90b5fb787..a7b042b781d5 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include @@ -38,7 +39,6 @@ #include #include -#include #include #include #include diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 9a9bced813ed..a7aed84d98c9 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -21,9 +21,9 @@ #include #include #include +#include #include -#include #include "atmel_usba_udc.h" diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 0bf72f943b00..8e62f81ae1ed 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -16,11 +16,11 @@ #include #include #include +#include #include #include -#include #include #ifndef CONFIG_ARCH_AT91 diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 94cac9f9919f..12cf5f31ee8f 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -19,8 +19,8 @@ #include #include #include +#include -#include #include #include diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h index b0f2c56a8ea2..dbd6d53cc270 100644 --- a/include/linux/platform_data/atmel.h +++ b/include/linux/platform_data/atmel.h @@ -8,6 +8,49 @@ #define __ATMEL_H__ #include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + /* USB Device */ +struct at91_udc_data { + int vbus_pin; /* high == host powering us */ + u8 vbus_active_low; /* vbus polarity */ + u8 vbus_polled; /* Use polling, not interrupt */ + int pullup_pin; /* active == D+ pulled up */ + u8 pullup_active_low; /* true == pullup_pin is active low */ +}; + + /* Compact Flash */ +struct at91_cf_data { + int irq_pin; /* I/O IRQ */ + int det_pin; /* Card detect */ + int vcc_pin; /* power switching */ + int rst_pin; /* card reset */ + u8 chipselect; /* EBI Chip Select number */ + u8 flags; +#define AT91_CF_TRUE_IDE 0x01 +#define AT91_IDE_SWAP_A0_A2 0x02 +}; + + /* USB Host */ +#define AT91_MAX_USBH_PORTS 3 +struct at91_usbh_data { + int vbus_pin[AT91_MAX_USBH_PORTS]; /* port power-control pin */ + int overcurrent_pin[AT91_MAX_USBH_PORTS]; + u8 ports; /* number of ports on root hub */ + u8 overcurrent_supported; + u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS]; + u8 overcurrent_status[AT91_MAX_USBH_PORTS]; + u8 overcurrent_changed[AT91_MAX_USBH_PORTS]; +}; /* NAND / SmartMedia */ struct atmel_nand_data { @@ -24,4 +67,28 @@ struct atmel_nand_data { unsigned int num_parts; }; + /* Serial */ +struct atmel_uart_data { + int num; /* port num */ + short use_dma_tx; /* use transmit DMA? */ + short use_dma_rx; /* use receive DMA? */ + void __iomem *regs; /* virt. base address, if any */ + struct serial_rs485 rs485; /* rs485 settings */ +}; + + /* Touchscreen Controller */ +struct at91_tsadcc_data { + unsigned int adc_clock; + u8 pendet_debounce; + u8 ts_sample_hold_time; +}; + +/* CAN */ +struct at91_can_data { + void (*transceiver_switch)(int on); +}; + +/* FIXME: this needs a better location, but gets stuff building again */ +extern int at91_suspend_entering_slow_clock(void); + #endif /* __ATMEL_H__ */ -- cgit v1.2.3 From 29807d1e24b7cd696442d2f600057230f084b3c7 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 14 Nov 2012 16:59:22 +0100 Subject: Input: mt: add input_mt_is_used This patch extracts the test (slot->frame == mt->frame) so that it can be used in third party drivers. Signed-off-by: Benjamin Tissoires Reviewed-by: Henrik Rydberg Signed-off-by: Jiri Kosina --- drivers/input/input-mt.c | 2 +- include/linux/input/mt.h | 6 ++++++ 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/input') diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c index c0ec7d42c3be..475b9d424eed 100644 --- a/drivers/input/input-mt.c +++ b/drivers/input/input-mt.c @@ -247,7 +247,7 @@ void input_mt_sync_frame(struct input_dev *dev) if (mt->flags & INPUT_MT_DROP_UNUSED) { for (s = mt->slots; s != mt->slots + mt->num_slots; s++) { - if (s->frame == mt->frame) + if (input_mt_is_used(mt, s)) continue; input_mt_slot(dev, s - mt->slots); input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, -1); diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h index cc5cca774bab..2e86bd0bfba1 100644 --- a/include/linux/input/mt.h +++ b/include/linux/input/mt.h @@ -69,6 +69,12 @@ static inline bool input_mt_is_active(const struct input_mt_slot *slot) return input_mt_get_value(slot, ABS_MT_TRACKING_ID) >= 0; } +static inline bool input_mt_is_used(const struct input_mt *mt, + const struct input_mt_slot *slot) +{ + return slot->frame == mt->frame; +} + int input_mt_init_slots(struct input_dev *dev, unsigned int num_slots, unsigned int flags); void input_mt_destroy_slots(struct input_dev *dev); -- cgit v1.2.3 From 8f520803d2a5dda0cf099c13cbf50ecf575d0341 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 4 Oct 2012 01:21:30 -0300 Subject: Input: da9052_tsi.c: Fix interrupt handling Currently da9062_tsi does not probe and it fails as follows: da9052 1-0048: Unable to determine device interrupts Use the new da9052 irq functions and allow the driver to probe and operate correctly. Tested on mx53qsb board using 'evtest' tool. Cc: Dmitry Torokhov Cc: Signed-off-by: Fabio Estevam Signed-off-by: Samuel Ortiz --- drivers/input/touchscreen/da9052_tsi.c | 59 ++++++++++++---------------------- 1 file changed, 20 insertions(+), 39 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/da9052_tsi.c b/drivers/input/touchscreen/da9052_tsi.c index e8df341090c0..53133efe0418 100644 --- a/drivers/input/touchscreen/da9052_tsi.c +++ b/drivers/input/touchscreen/da9052_tsi.c @@ -27,8 +27,6 @@ struct da9052_tsi { struct input_dev *dev; struct delayed_work ts_pen_work; struct mutex mutex; - unsigned int irq_pendwn; - unsigned int irq_datardy; bool stopped; bool adc_on; }; @@ -45,8 +43,8 @@ static irqreturn_t da9052_ts_pendwn_irq(int irq, void *data) if (!tsi->stopped) { /* Mask PEN_DOWN event and unmask TSI_READY event */ - disable_irq_nosync(tsi->irq_pendwn); - enable_irq(tsi->irq_datardy); + da9052_disable_irq_nosync(tsi->da9052, DA9052_IRQ_PENDOWN); + da9052_enable_irq(tsi->da9052, DA9052_IRQ_TSIREADY); da9052_ts_adc_toggle(tsi, true); @@ -137,8 +135,8 @@ static void da9052_ts_pen_work(struct work_struct *work) return; /* Mask TSI_READY event and unmask PEN_DOWN event */ - disable_irq(tsi->irq_datardy); - enable_irq(tsi->irq_pendwn); + da9052_disable_irq(tsi->da9052, DA9052_IRQ_TSIREADY); + da9052_enable_irq(tsi->da9052, DA9052_IRQ_PENDOWN); } } } @@ -197,7 +195,7 @@ static int da9052_ts_input_open(struct input_dev *input_dev) mb(); /* Unmask PEN_DOWN event */ - enable_irq(tsi->irq_pendwn); + da9052_enable_irq(tsi->da9052, DA9052_IRQ_PENDOWN); /* Enable Pen Detect Circuit */ return da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, @@ -210,11 +208,11 @@ static void da9052_ts_input_close(struct input_dev *input_dev) tsi->stopped = true; mb(); - disable_irq(tsi->irq_pendwn); + da9052_disable_irq(tsi->da9052, DA9052_IRQ_PENDOWN); cancel_delayed_work_sync(&tsi->ts_pen_work); if (tsi->adc_on) { - disable_irq(tsi->irq_datardy); + da9052_disable_irq(tsi->da9052, DA9052_IRQ_TSIREADY); da9052_ts_adc_toggle(tsi, false); /* @@ -222,7 +220,7 @@ static void da9052_ts_input_close(struct input_dev *input_dev) * twice and we need to enable it to keep enable/disable * counter balanced. IRQ is still off though. */ - enable_irq(tsi->irq_pendwn); + da9052_enable_irq(tsi->da9052, DA9052_IRQ_PENDOWN); } /* Disable Pen Detect Circuit */ @@ -234,21 +232,12 @@ static int __devinit da9052_ts_probe(struct platform_device *pdev) struct da9052 *da9052; struct da9052_tsi *tsi; struct input_dev *input_dev; - int irq_pendwn; - int irq_datardy; int error; da9052 = dev_get_drvdata(pdev->dev.parent); if (!da9052) return -EINVAL; - irq_pendwn = platform_get_irq_byname(pdev, "PENDWN"); - irq_datardy = platform_get_irq_byname(pdev, "TSIRDY"); - if (irq_pendwn < 0 || irq_datardy < 0) { - dev_err(da9052->dev, "Unable to determine device interrupts\n"); - return -ENXIO; - } - tsi = kzalloc(sizeof(struct da9052_tsi), GFP_KERNEL); input_dev = input_allocate_device(); if (!tsi || !input_dev) { @@ -258,8 +247,6 @@ static int __devinit da9052_ts_probe(struct platform_device *pdev) tsi->da9052 = da9052; tsi->dev = input_dev; - tsi->irq_pendwn = da9052->irq_base + irq_pendwn; - tsi->irq_datardy = da9052->irq_base + irq_datardy; tsi->stopped = true; INIT_DELAYED_WORK(&tsi->ts_pen_work, da9052_ts_pen_work); @@ -287,31 +274,25 @@ static int __devinit da9052_ts_probe(struct platform_device *pdev) /* Disable ADC */ da9052_ts_adc_toggle(tsi, false); - error = request_threaded_irq(tsi->irq_pendwn, - NULL, da9052_ts_pendwn_irq, - IRQF_TRIGGER_LOW | IRQF_ONESHOT, - "PENDWN", tsi); + error = da9052_request_irq(tsi->da9052, DA9052_IRQ_PENDOWN, + "pendown-irq", da9052_ts_pendwn_irq, tsi); if (error) { dev_err(tsi->da9052->dev, - "Failed to register PENDWN IRQ %d, error = %d\n", - tsi->irq_pendwn, error); + "Failed to register PENDWN IRQ: %d\n", error); goto err_free_mem; } - error = request_threaded_irq(tsi->irq_datardy, - NULL, da9052_ts_datardy_irq, - IRQF_TRIGGER_LOW | IRQF_ONESHOT, - "TSIRDY", tsi); + error = da9052_request_irq(tsi->da9052, DA9052_IRQ_TSIREADY, + "tsiready-irq", da9052_ts_datardy_irq, tsi); if (error) { dev_err(tsi->da9052->dev, - "Failed to register TSIRDY IRQ %d, error = %d\n", - tsi->irq_datardy, error); + "Failed to register TSIRDY IRQ :%d\n", error); goto err_free_pendwn_irq; } /* Mask PEN_DOWN and TSI_READY events */ - disable_irq(tsi->irq_pendwn); - disable_irq(tsi->irq_datardy); + da9052_disable_irq(tsi->da9052, DA9052_IRQ_PENDOWN); + da9052_disable_irq(tsi->da9052, DA9052_IRQ_TSIREADY); error = da9052_configure_tsi(tsi); if (error) @@ -326,9 +307,9 @@ static int __devinit da9052_ts_probe(struct platform_device *pdev) return 0; err_free_datardy_irq: - free_irq(tsi->irq_datardy, tsi); + da9052_free_irq(tsi->da9052, DA9052_IRQ_TSIREADY, tsi); err_free_pendwn_irq: - free_irq(tsi->irq_pendwn, tsi); + da9052_free_irq(tsi->da9052, DA9052_IRQ_PENDOWN, tsi); err_free_mem: kfree(tsi); input_free_device(input_dev); @@ -342,8 +323,8 @@ static int __devexit da9052_ts_remove(struct platform_device *pdev) da9052_reg_write(tsi->da9052, DA9052_LDO9_REG, 0x19); - free_irq(tsi->irq_pendwn, tsi); - free_irq(tsi->irq_datardy, tsi); + da9052_free_irq(tsi->da9052, DA9052_IRQ_TSIREADY, tsi); + da9052_free_irq(tsi->da9052, DA9052_IRQ_PENDOWN, tsi); input_unregister_device(tsi->dev); kfree(tsi); -- cgit v1.2.3 From 21eed07d122a69d32220256c9a461a9d047e92b9 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 4 Oct 2012 00:15:07 -0300 Subject: Input: da9052_onkey.c: Convert to the new da9052 interrupt functions. Use the new da9052 irq functions and allow the driver to probe successfully. Cc: Dmitry Torokhov Cc: Signed-off-by: Fabio Estevam Reviewed-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/input/misc/da9052_onkey.c | 22 +++++----------------- 1 file changed, 5 insertions(+), 17 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/misc/da9052_onkey.c b/drivers/input/misc/da9052_onkey.c index 3c843cd725fa..3be3acc3a6eb 100644 --- a/drivers/input/misc/da9052_onkey.c +++ b/drivers/input/misc/da9052_onkey.c @@ -24,7 +24,6 @@ struct da9052_onkey { struct da9052 *da9052; struct input_dev *input; struct delayed_work work; - unsigned int irq; }; static void da9052_onkey_query(struct da9052_onkey *onkey) @@ -76,7 +75,6 @@ static int __devinit da9052_onkey_probe(struct platform_device *pdev) struct da9052 *da9052 = dev_get_drvdata(pdev->dev.parent); struct da9052_onkey *onkey; struct input_dev *input_dev; - int irq; int error; if (!da9052) { @@ -84,13 +82,6 @@ static int __devinit da9052_onkey_probe(struct platform_device *pdev) return -EINVAL; } - irq = platform_get_irq_byname(pdev, "ONKEY"); - if (irq < 0) { - dev_err(&pdev->dev, - "Failed to get an IRQ for input device, %d\n", irq); - return -EINVAL; - } - onkey = kzalloc(sizeof(*onkey), GFP_KERNEL); input_dev = input_allocate_device(); if (!onkey || !input_dev) { @@ -101,7 +92,6 @@ static int __devinit da9052_onkey_probe(struct platform_device *pdev) onkey->input = input_dev; onkey->da9052 = da9052; - onkey->irq = irq; INIT_DELAYED_WORK(&onkey->work, da9052_onkey_work); input_dev->name = "da9052-onkey"; @@ -111,13 +101,11 @@ static int __devinit da9052_onkey_probe(struct platform_device *pdev) input_dev->evbit[0] = BIT_MASK(EV_KEY); __set_bit(KEY_POWER, input_dev->keybit); - error = request_threaded_irq(onkey->irq, NULL, da9052_onkey_irq, - IRQF_TRIGGER_LOW | IRQF_ONESHOT, - "ONKEY", onkey); + error = da9052_request_irq(onkey->da9052, DA9052_IRQ_NONKEY, "ONKEY", + da9052_onkey_irq, onkey); if (error < 0) { dev_err(onkey->da9052->dev, - "Failed to register ONKEY IRQ %d, error = %d\n", - onkey->irq, error); + "Failed to register ONKEY IRQ: %d\n", error); goto err_free_mem; } @@ -132,7 +120,7 @@ static int __devinit da9052_onkey_probe(struct platform_device *pdev) return 0; err_free_irq: - free_irq(onkey->irq, onkey); + da9052_free_irq(onkey->da9052, DA9052_IRQ_NONKEY, onkey); cancel_delayed_work_sync(&onkey->work); err_free_mem: input_free_device(input_dev); @@ -145,7 +133,7 @@ static int __devexit da9052_onkey_remove(struct platform_device *pdev) { struct da9052_onkey *onkey = platform_get_drvdata(pdev); - free_irq(onkey->irq, onkey); + da9052_free_irq(onkey->da9052, DA9052_IRQ_NONKEY, onkey); cancel_delayed_work_sync(&onkey->work); input_unregister_device(onkey->input); -- cgit v1.2.3 From 9dd555e2f4de1af1bb0f75cc84ed0708fcdb5987 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 26 Nov 2012 21:17:21 +0000 Subject: Input - arizona-haptics: Add driver haptics module on Arizona CODECs The Arizona CODECs contain a haptics module providing vibration feedback support. Implement basic support for this, providing simple start/stop and signal magnitude control. Since the output path for haptics is routed through the CODEC audio routing it is modelled as a signal generator within ASoC, the haptics driver calls DAPM to start and stop the output drivers. An appropriate output path must be configured via ALSA to connect the haptics source to the correct output. Signed-off-by: Mark Brown --- drivers/input/misc/Kconfig | 10 ++ drivers/input/misc/Makefile | 1 + drivers/input/misc/arizona-haptics.c | 255 +++++++++++++++++++++++++++++++++++ include/linux/mfd/arizona/pdata.h | 6 + 4 files changed, 272 insertions(+) create mode 100644 drivers/input/misc/arizona-haptics.c (limited to 'drivers/input') diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 7c0f1ecfdd7a..104a7c3153c0 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -72,6 +72,16 @@ config INPUT_AD714X_SPI To compile this driver as a module, choose M here: the module will be called ad714x-spi. +config INPUT_ARIZONA_HAPTICS + tristate "Arizona haptics support" + depends on MFD_ARIZONA && SND_SOC + select INPUT_FF_MEMLESS + help + Say Y to enable support for the haptics module in Arizona CODECs. + + To compile this driver as a module, choose M here: the + module will be called arizona-haptics. + config INPUT_BMA150 tristate "BMA150/SMB380 acceleration sensor support" depends on I2C diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 83fe6f5b77d1..5ea769eda999 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_INPUT_ADXL34X) += adxl34x.o obj-$(CONFIG_INPUT_ADXL34X_I2C) += adxl34x-i2c.o obj-$(CONFIG_INPUT_ADXL34X_SPI) += adxl34x-spi.o obj-$(CONFIG_INPUT_APANEL) += apanel.o +obj-$(CONFIG_INPUT_ARIZONA_HAPTICS) += arizona-haptics.o obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o obj-$(CONFIG_INPUT_BFIN_ROTARY) += bfin_rotary.o diff --git a/drivers/input/misc/arizona-haptics.c b/drivers/input/misc/arizona-haptics.c new file mode 100644 index 000000000000..7a04f54ef961 --- /dev/null +++ b/drivers/input/misc/arizona-haptics.c @@ -0,0 +1,255 @@ +/* + * Arizona haptics driver + * + * Copyright 2012 Wolfson Microelectronics plc + * + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +struct arizona_haptics { + struct arizona *arizona; + struct input_dev *input_dev; + struct work_struct work; + + struct mutex mutex; + u8 intensity; +}; + +static void arizona_haptics_work(struct work_struct *work) +{ + struct arizona_haptics *haptics = container_of(work, + struct arizona_haptics, + work); + struct arizona *arizona = haptics->arizona; + struct mutex *dapm_mutex = &arizona->dapm->card->dapm_mutex; + int ret; + + if (!haptics->arizona->dapm) { + dev_err(arizona->dev, "No DAPM context\n"); + return; + } + + if (haptics->intensity) { + ret = regmap_update_bits(arizona->regmap, + ARIZONA_HAPTICS_PHASE_2_INTENSITY, + ARIZONA_PHASE2_INTENSITY_MASK, + haptics->intensity); + if (ret != 0) { + dev_err(arizona->dev, "Failed to set intensity: %d\n", + ret); + return; + } + + /* This enable sequence will be a noop if already enabled */ + ret = regmap_update_bits(arizona->regmap, + ARIZONA_HAPTICS_CONTROL_1, + ARIZONA_HAP_CTRL_MASK, + 1 << ARIZONA_HAP_CTRL_SHIFT); + if (ret != 0) { + dev_err(arizona->dev, "Failed to start haptics: %d\n", + ret); + return; + } + + mutex_lock_nested(dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME); + + ret = snd_soc_dapm_enable_pin(arizona->dapm, "HAPTICS"); + if (ret != 0) { + dev_err(arizona->dev, "Failed to start HAPTICS: %d\n", + ret); + mutex_unlock(dapm_mutex); + return; + } + + ret = snd_soc_dapm_sync(arizona->dapm); + if (ret != 0) { + dev_err(arizona->dev, "Failed to sync DAPM: %d\n", + ret); + mutex_unlock(dapm_mutex); + return; + } + + mutex_unlock(dapm_mutex); + + } else { + /* This disable sequence will be a noop if already enabled */ + mutex_lock_nested(dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME); + + ret = snd_soc_dapm_disable_pin(arizona->dapm, "HAPTICS"); + if (ret != 0) { + dev_err(arizona->dev, "Failed to disable HAPTICS: %d\n", + ret); + mutex_unlock(dapm_mutex); + return; + } + + ret = snd_soc_dapm_sync(arizona->dapm); + if (ret != 0) { + dev_err(arizona->dev, "Failed to sync DAPM: %d\n", + ret); + mutex_unlock(dapm_mutex); + return; + } + + mutex_unlock(dapm_mutex); + + ret = regmap_update_bits(arizona->regmap, + ARIZONA_HAPTICS_CONTROL_1, + ARIZONA_HAP_CTRL_MASK, + 1 << ARIZONA_HAP_CTRL_SHIFT); + if (ret != 0) { + dev_err(arizona->dev, "Failed to stop haptics: %d\n", + ret); + return; + } + } +} + +static int arizona_haptics_play(struct input_dev *input, void *data, + struct ff_effect *effect) +{ + struct arizona_haptics *haptics = input_get_drvdata(input); + struct arizona *arizona = haptics->arizona; + + if (!arizona->dapm) { + dev_err(arizona->dev, "No DAPM context\n"); + return -EBUSY; + } + + if (effect->u.rumble.strong_magnitude) { + /* Scale the magnitude into the range the device supports */ + if (arizona->pdata.hap_act) { + haptics->intensity = + effect->u.rumble.strong_magnitude >> 9; + if (effect->direction < 0x8000) + haptics->intensity += 0x7f; + } else { + haptics->intensity = + effect->u.rumble.strong_magnitude >> 8; + } + } else { + haptics->intensity = 0; + } + + schedule_work(&haptics->work); + + return 0; +} + +static void arizona_haptics_close(struct input_dev *input) +{ + struct arizona_haptics *haptics = input_get_drvdata(input); + struct mutex *dapm_mutex = &haptics->arizona->dapm->card->dapm_mutex; + + cancel_work_sync(&haptics->work); + + mutex_lock_nested(dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME); + + if (haptics->arizona->dapm) + snd_soc_dapm_disable_pin(haptics->arizona->dapm, "HAPTICS"); + + mutex_unlock(dapm_mutex); +} + +static int arizona_haptics_probe(struct platform_device *pdev) +{ + struct arizona *arizona = dev_get_drvdata(pdev->dev.parent); + struct arizona_haptics *haptics; + int ret; + + haptics = devm_kzalloc(&pdev->dev, sizeof(*haptics), GFP_KERNEL); + if (!haptics) + return -ENOMEM; + + haptics->arizona = arizona; + + ret = regmap_update_bits(arizona->regmap, ARIZONA_HAPTICS_CONTROL_1, + ARIZONA_HAP_ACT, arizona->pdata.hap_act); + if (ret != 0) { + dev_err(arizona->dev, "Failed to set haptics actuator: %d\n", + ret); + return ret; + } + + INIT_WORK(&haptics->work, arizona_haptics_work); + + haptics->input_dev = input_allocate_device(); + if (haptics->input_dev == NULL) { + dev_err(arizona->dev, "Failed to allocate input device\n"); + return -ENOMEM; + } + + input_set_drvdata(haptics->input_dev, haptics); + + haptics->input_dev->name = "arizona:haptics"; + haptics->input_dev->dev.parent = pdev->dev.parent; + haptics->input_dev->close = arizona_haptics_close; + __set_bit(FF_RUMBLE, haptics->input_dev->ffbit); + + ret = input_ff_create_memless(haptics->input_dev, NULL, + arizona_haptics_play); + if (ret < 0) { + dev_err(arizona->dev, "input_ff_create_memless() failed: %d\n", + ret); + goto err_ialloc; + } + + ret = input_register_device(haptics->input_dev); + if (ret < 0) { + dev_err(arizona->dev, "couldn't register input device: %d\n", + ret); + goto err_iff; + } + + platform_set_drvdata(pdev, haptics); + + return 0; + +err_iff: + if (haptics->input_dev) + input_ff_destroy(haptics->input_dev); +err_ialloc: + input_free_device(haptics->input_dev); + + return ret; +} + +static int arizona_haptics_remove(struct platform_device *pdev) +{ + struct arizona_haptics *haptics = platform_get_drvdata(pdev); + + input_unregister_device(haptics->input_dev); + + return 0; +} + +static struct platform_driver arizona_haptics_driver = { + .probe = arizona_haptics_probe, + .remove = arizona_haptics_remove, + .driver = { + .name = "arizona-haptics", + .owner = THIS_MODULE, + }, +}; +module_platform_driver(arizona_haptics_driver); + +MODULE_ALIAS("platform:arizona-haptics"); +MODULE_DESCRIPTION("Arizona haptics driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mark Brown "); diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h index 7ab442905a57..8b1d1daaae16 100644 --- a/include/linux/mfd/arizona/pdata.h +++ b/include/linux/mfd/arizona/pdata.h @@ -62,6 +62,9 @@ #define ARIZONA_MAX_OUTPUT 6 +#define ARIZONA_HAP_ACT_ERM 0 +#define ARIZONA_HAP_ACT_LRA 2 + #define ARIZONA_MAX_PDM_SPK 2 struct regulator_init_data; @@ -114,6 +117,9 @@ struct arizona_pdata { /** PDM speaker format */ unsigned int spk_fmt[ARIZONA_MAX_PDM_SPK]; + + /** Haptic actuator type */ + unsigned int hap_act; }; #endif -- cgit v1.2.3 From 55220bb3e5f917dd5fee1153c612f9a83599f639 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 10 Dec 2012 12:25:32 -0800 Subject: Input: matrix-keymap - provide proper module license The matrix-keymap module is currently lacking a proper module license, add one so we don't have this module tainting the entire kernel. This issue has been present since commit 1932811f426f ("Input: matrix-keymap - uninline and prepare for device tree support") Signed-off-by: Florian Fainelli CC: stable@vger.kernel.org # v3.5+ Signed-off-by: Dmitry Torokhov Signed-off-by: Linus Torvalds --- drivers/input/matrix-keymap.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/input') diff --git a/drivers/input/matrix-keymap.c b/drivers/input/matrix-keymap.c index 443ad64b7f2a..d88d9be1d1b7 100644 --- a/drivers/input/matrix-keymap.c +++ b/drivers/input/matrix-keymap.c @@ -23,6 +23,7 @@ #include #include #include +#include #include static bool matrix_keypad_map_key(struct input_dev *input_dev, @@ -161,3 +162,5 @@ int matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data, return 0; } EXPORT_SYMBOL(matrix_keypad_build_keymap); + +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From ad68652412276f68ad4fe3e1ecf5ee6880876783 Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Tue, 11 Dec 2012 22:18:05 +0100 Subject: x86, 8042: Enable A20 using KBC to fix S3 resume on some MSI laptops Some MSI laptop BIOSes are broken - INT 15h code uses port 92h to enable A20 line but resume code assumes that KBC was used. The laptop will not resume from S3 otherwise but powers off after a while and then powers on again stuck with a blank screen. Fix it by enabling A20 using KBC in i8042_platform_init for x86. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=12878 Signed-off-by: Ondrej Zary Cc: Dmitry Torokhov Cc: Alan Cox Cc: Rafael J. Wysocki Cc: Link: http://lkml.kernel.org/r/201212112218.06551.linux@rainbow-software.org Signed-off-by: H. Peter Anvin --- drivers/input/serio/i8042-x86ia64io.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/input') diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index d6cc77a53c7e..5f306f79da0c 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -921,6 +921,7 @@ static int __init i8042_platform_init(void) int retval; #ifdef CONFIG_X86 + u8 a20_on = 0xdf; /* Just return if pre-detection shows no i8042 controller exist */ if (!x86_platform.i8042_detect()) return -ENODEV; @@ -960,6 +961,14 @@ static int __init i8042_platform_init(void) if (dmi_check_system(i8042_dmi_dritek_table)) i8042_dritek = true; + + /* + * A20 was already enabled during early kernel init. But some buggy + * BIOSes (in MSI Laptops) require A20 to be enabled using 8042 to + * resume from S3. So we do it here and hope that nothing breaks. + */ + i8042_command(&a20_on, 0x10d1); + i8042_command(NULL, 0x00ff); /* Null command for SMM firmware */ #endif /* CONFIG_X86 */ return retval; -- cgit v1.2.3 From 770b6cb4d21fb3e3df2a7a51e186a3c14db1ec30 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Sun, 16 Dec 2012 12:28:46 -0800 Subject: ARM: OMAP: Fix drivers to depend on omap for internal devices These devices are not available on other architectures, so let's limit them to omap. If the driver subsystem maintainers want to build test system wide changes without building for each target, it's easy to carry a test patch that just strips out the depends entries from Kconfig files. Signed-off-by: Tony Lindgren Signed-off-by: Linus Torvalds --- drivers/bus/Kconfig | 1 + drivers/input/keyboard/Kconfig | 1 + drivers/usb/phy/Kconfig | 1 + drivers/video/omap2/Kconfig | 4 ++++ drivers/w1/masters/Kconfig | 1 + 5 files changed, 8 insertions(+) (limited to 'drivers/input') diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index bbec35d21fe5..0f51ed687dc8 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -6,6 +6,7 @@ menu "Bus devices" config OMAP_OCP2SCP tristate "OMAP OCP2SCP DRIVER" + depends on ARCH_OMAP2PLUS help Driver to enable ocp2scp module which transforms ocp interface protocol to scp protocol. In OMAP4, USB PHY is connected via diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 77629d33f03f..febead4bf8a5 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -544,6 +544,7 @@ config KEYBOARD_OMAP config KEYBOARD_OMAP4 tristate "TI OMAP4+ keypad support" + depends on ARCH_OMAP2PLUS select INPUT_MATRIXKMAP help Say Y here if you want to use the OMAP4+ keypad. diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 7eb73c561bd2..5de6e7f39f9c 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -6,6 +6,7 @@ comment "USB Physical Layer drivers" config OMAP_USB2 tristate "OMAP USB2 PHY Driver" + depends on ARCH_OMAP2PLUS select USB_OTG_UTILS help Enable this to support the transceiver that is part of SOC. This diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig index 346d67d6cf4d..b07b2b042e7e 100644 --- a/drivers/video/omap2/Kconfig +++ b/drivers/video/omap2/Kconfig @@ -1,6 +1,10 @@ config OMAP2_VRFB bool +if ARCH_OMAP2PLUS + source "drivers/video/omap2/dss/Kconfig" source "drivers/video/omap2/omapfb/Kconfig" source "drivers/video/omap2/displays/Kconfig" + +endif diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig index c433a746e3f5..e8ca63a82b97 100644 --- a/drivers/w1/masters/Kconfig +++ b/drivers/w1/masters/Kconfig @@ -60,6 +60,7 @@ config W1_MASTER_GPIO config HDQ_MASTER_OMAP tristate "OMAP HDQ driver" + depends on ARCH_OMAP help Say Y here if you want support for the 1-wire or HDQ Interface on an OMAP processor. -- cgit v1.2.3 From 0fe763c570ad2701c830b9e4e53c65ad89c11c32 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 21 Dec 2012 15:14:44 -0800 Subject: Drivers: misc: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton Signed-off-by: Greg Kroah-Hartman --- drivers/auxdisplay/cfag12864bfb.c | 10 +++++----- drivers/bus/omap-ocp2scp.c | 6 +++--- drivers/bus/omap_l3_noc.c | 6 +++--- drivers/cdrom/gdrom.c | 18 +++++++++--------- drivers/clk/clk-twl6040.c | 6 +++--- drivers/clk/ux500/abx500-clk.c | 2 +- drivers/connector/connector.c | 4 ++-- drivers/devfreq/exynos4_bus.c | 6 +++--- drivers/firmware/dcdbas.c | 6 +++--- drivers/gpio/gpio-da9055.c | 8 ++++---- drivers/gpio/gpio-ts5500.c | 6 +++--- drivers/gpio/gpio-viperboard.c | 6 +++--- drivers/hid/i2c-hid/i2c-hid.c | 12 ++++++------ drivers/hsi/clients/hsi_char.c | 8 ++++---- drivers/hwmon/vexpress.c | 4 ++-- drivers/input/keyboard/tca8418_keypad.c | 2 +- drivers/nfc/pn544/i2c.c | 8 ++++---- drivers/parisc/dino.c | 2 +- drivers/parisc/lba_pci.c | 2 +- drivers/pps/clients/pps-gpio.c | 2 +- drivers/ps3/ps3-lpm.c | 2 +- drivers/ps3/ps3-sys-manager.c | 2 +- drivers/ps3/ps3av.c | 2 +- drivers/remoteproc/omap_remoteproc.c | 6 +++--- drivers/rpmsg/virtio_rpmsg_bus.c | 4 ++-- drivers/sh/pfc/gpio.c | 6 +++--- drivers/sh/pfc/pinctrl.c | 20 +++++++++----------- drivers/sn/ioc3.c | 14 ++++++-------- 28 files changed, 88 insertions(+), 92 deletions(-) (limited to 'drivers/input') diff --git a/drivers/auxdisplay/cfag12864bfb.c b/drivers/auxdisplay/cfag12864bfb.c index 5ad3bad2b0a5..d585735430dd 100644 --- a/drivers/auxdisplay/cfag12864bfb.c +++ b/drivers/auxdisplay/cfag12864bfb.c @@ -37,7 +37,7 @@ #define CFAG12864BFB_NAME "cfag12864bfb" -static struct fb_fix_screeninfo cfag12864bfb_fix __devinitdata = { +static struct fb_fix_screeninfo cfag12864bfb_fix = { .id = "cfag12864b", .type = FB_TYPE_PACKED_PIXELS, .visual = FB_VISUAL_MONO10, @@ -48,7 +48,7 @@ static struct fb_fix_screeninfo cfag12864bfb_fix __devinitdata = { .accel = FB_ACCEL_NONE, }; -static struct fb_var_screeninfo cfag12864bfb_var __devinitdata = { +static struct fb_var_screeninfo cfag12864bfb_var = { .xres = CFAG12864B_WIDTH, .yres = CFAG12864B_HEIGHT, .xres_virtual = CFAG12864B_WIDTH, @@ -80,7 +80,7 @@ static struct fb_ops cfag12864bfb_ops = { .fb_mmap = cfag12864bfb_mmap, }; -static int __devinit cfag12864bfb_probe(struct platform_device *device) +static int cfag12864bfb_probe(struct platform_device *device) { int ret = -EINVAL; struct fb_info *info = framebuffer_alloc(0, &device->dev); @@ -114,7 +114,7 @@ none: return ret; } -static int __devexit cfag12864bfb_remove(struct platform_device *device) +static int cfag12864bfb_remove(struct platform_device *device) { struct fb_info *info = platform_get_drvdata(device); @@ -128,7 +128,7 @@ static int __devexit cfag12864bfb_remove(struct platform_device *device) static struct platform_driver cfag12864bfb_driver = { .probe = cfag12864bfb_probe, - .remove = __devexit_p(cfag12864bfb_remove), + .remove = cfag12864bfb_remove, .driver = { .name = CFAG12864BFB_NAME, }, diff --git a/drivers/bus/omap-ocp2scp.c b/drivers/bus/omap-ocp2scp.c index 0c48b0e05ed6..fe7191663bbd 100644 --- a/drivers/bus/omap-ocp2scp.c +++ b/drivers/bus/omap-ocp2scp.c @@ -52,7 +52,7 @@ static int ocp2scp_remove_devices(struct device *dev, void *c) return 0; } -static int __devinit omap_ocp2scp_probe(struct platform_device *pdev) +static int omap_ocp2scp_probe(struct platform_device *pdev) { int ret; unsigned res_cnt, i; @@ -116,7 +116,7 @@ err0: return ret; } -static int __devexit omap_ocp2scp_remove(struct platform_device *pdev) +static int omap_ocp2scp_remove(struct platform_device *pdev) { pm_runtime_disable(&pdev->dev); device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices); @@ -134,7 +134,7 @@ MODULE_DEVICE_TABLE(of, omap_ocp2scp_id_table); static struct platform_driver omap_ocp2scp_driver = { .probe = omap_ocp2scp_probe, - .remove = __devexit_p(omap_ocp2scp_remove), + .remove = omap_ocp2scp_remove, .driver = { .name = "omap-ocp2scp", .owner = THIS_MODULE, diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c index ab911a33f8a8..feeecae623f6 100644 --- a/drivers/bus/omap_l3_noc.c +++ b/drivers/bus/omap_l3_noc.c @@ -128,7 +128,7 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3) return IRQ_HANDLED; } -static int __devinit omap4_l3_probe(struct platform_device *pdev) +static int omap4_l3_probe(struct platform_device *pdev) { static struct omap4_l3 *l3; struct resource *res; @@ -219,7 +219,7 @@ err0: return ret; } -static int __devexit omap4_l3_remove(struct platform_device *pdev) +static int omap4_l3_remove(struct platform_device *pdev) { struct omap4_l3 *l3 = platform_get_drvdata(pdev); @@ -245,7 +245,7 @@ MODULE_DEVICE_TABLE(of, l3_noc_match); static struct platform_driver omap4_l3_driver = { .probe = omap4_l3_probe, - .remove = __devexit_p(omap4_l3_remove), + .remove = omap4_l3_remove, .driver = { .name = "omap_l3_noc", .owner = THIS_MODULE, diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c index 75d485afe56c..d59cdcb8fe39 100644 --- a/drivers/cdrom/gdrom.c +++ b/drivers/cdrom/gdrom.c @@ -557,7 +557,7 @@ static irqreturn_t gdrom_dma_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static int __devinit gdrom_set_interrupt_handlers(void) +static int gdrom_set_interrupt_handlers(void) { int err; @@ -681,7 +681,7 @@ static void gdrom_request(struct request_queue *rq) } /* Print string identifying GD ROM device */ -static int __devinit gdrom_outputversion(void) +static int gdrom_outputversion(void) { struct gdrom_id *id; char *model_name, *manuf_name, *firmw_ver; @@ -715,7 +715,7 @@ free_id: } /* set the default mode for DMA transfer */ -static int __devinit gdrom_init_dma_mode(void) +static int gdrom_init_dma_mode(void) { __raw_writeb(0x13, GDROM_ERROR_REG); __raw_writeb(0x22, GDROM_INTSEC_REG); @@ -736,7 +736,7 @@ static int __devinit gdrom_init_dma_mode(void) return 0; } -static void __devinit probe_gdrom_setupcd(void) +static void probe_gdrom_setupcd(void) { gd.cd_info->ops = &gdrom_ops; gd.cd_info->capacity = 1; @@ -745,7 +745,7 @@ static void __devinit probe_gdrom_setupcd(void) CDC_SELECT_DISC; } -static void __devinit probe_gdrom_setupdisk(void) +static void probe_gdrom_setupdisk(void) { gd.disk->major = gdrom_major; gd.disk->first_minor = 1; @@ -753,7 +753,7 @@ static void __devinit probe_gdrom_setupdisk(void) strcpy(gd.disk->disk_name, GDROM_DEV_NAME); } -static int __devinit probe_gdrom_setupqueue(void) +static int probe_gdrom_setupqueue(void) { blk_queue_logical_block_size(gd.gdrom_rq, GDROM_HARD_SECTOR); /* using DMA so memory will need to be contiguous */ @@ -768,7 +768,7 @@ static int __devinit probe_gdrom_setupqueue(void) * register this as a block device and as compliant with the * universal CD Rom driver interface */ -static int __devinit probe_gdrom(struct platform_device *devptr) +static int probe_gdrom(struct platform_device *devptr) { int err; /* Start the device */ @@ -838,7 +838,7 @@ probe_fail_no_mem: return err; } -static int __devexit remove_gdrom(struct platform_device *devptr) +static int remove_gdrom(struct platform_device *devptr) { flush_work(&work); blk_cleanup_queue(gd.gdrom_rq); @@ -854,7 +854,7 @@ static int __devexit remove_gdrom(struct platform_device *devptr) static struct platform_driver gdrom_driver = { .probe = probe_gdrom, - .remove = __devexit_p(remove_gdrom), + .remove = remove_gdrom, .driver = { .name = GDROM_DEV_NAME, }, diff --git a/drivers/clk/clk-twl6040.c b/drivers/clk/clk-twl6040.c index bc1e713e7b9c..3af729b1b89d 100644 --- a/drivers/clk/clk-twl6040.c +++ b/drivers/clk/clk-twl6040.c @@ -78,7 +78,7 @@ static struct clk_init_data wm831x_clkout_init = { .flags = CLK_IS_ROOT, }; -static int __devinit twl6040_clk_probe(struct platform_device *pdev) +static int twl6040_clk_probe(struct platform_device *pdev) { struct twl6040 *twl6040 = dev_get_drvdata(pdev->dev.parent); struct twl6040_clk *clkdata; @@ -100,7 +100,7 @@ static int __devinit twl6040_clk_probe(struct platform_device *pdev) return 0; } -static int __devexit twl6040_clk_remove(struct platform_device *pdev) +static int twl6040_clk_remove(struct platform_device *pdev) { struct twl6040_clk *clkdata = dev_get_drvdata(&pdev->dev); @@ -115,7 +115,7 @@ static struct platform_driver twl6040_clk_driver = { .owner = THIS_MODULE, }, .probe = twl6040_clk_probe, - .remove = __devexit_p(twl6040_clk_remove), + .remove = twl6040_clk_remove, }; module_platform_driver(twl6040_clk_driver); diff --git a/drivers/clk/ux500/abx500-clk.c b/drivers/clk/ux500/abx500-clk.c index e27c52317ffe..9f7400d74fa7 100644 --- a/drivers/clk/ux500/abx500-clk.c +++ b/drivers/clk/ux500/abx500-clk.c @@ -34,7 +34,7 @@ static int ab9540_reg_clks(struct device *dev) return 0; } -static int __devinit abx500_clk_probe(struct platform_device *pdev) +static int abx500_clk_probe(struct platform_device *pdev) { struct ab8500 *parent = dev_get_drvdata(pdev->dev.parent); int ret; diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c index 965b7811e04f..7b695913cb30 100644 --- a/drivers/connector/connector.c +++ b/drivers/connector/connector.c @@ -256,7 +256,7 @@ static struct cn_dev cdev = { .input = cn_rx_skb, }; -static int __devinit cn_init(void) +static int cn_init(void) { struct cn_dev *dev = &cdev; struct netlink_kernel_cfg cfg = { @@ -281,7 +281,7 @@ static int __devinit cn_init(void) return 0; } -static void __devexit cn_fini(void) +static void cn_fini(void) { struct cn_dev *dev = &cdev; diff --git a/drivers/devfreq/exynos4_bus.c b/drivers/devfreq/exynos4_bus.c index 741837208716..80c745e83082 100644 --- a/drivers/devfreq/exynos4_bus.c +++ b/drivers/devfreq/exynos4_bus.c @@ -980,7 +980,7 @@ unlock: return NOTIFY_DONE; } -static __devinit int exynos4_busfreq_probe(struct platform_device *pdev) +static int exynos4_busfreq_probe(struct platform_device *pdev) { struct busfreq_data *data; struct opp *opp; @@ -1056,7 +1056,7 @@ static __devinit int exynos4_busfreq_probe(struct platform_device *pdev) return 0; } -static __devexit int exynos4_busfreq_remove(struct platform_device *pdev) +static int exynos4_busfreq_remove(struct platform_device *pdev) { struct busfreq_data *data = platform_get_drvdata(pdev); @@ -1087,7 +1087,7 @@ static const struct platform_device_id exynos4_busfreq_id[] = { static struct platform_driver exynos4_busfreq_driver = { .probe = exynos4_busfreq_probe, - .remove = __devexit_p(exynos4_busfreq_remove), + .remove = exynos4_busfreq_remove, .id_table = exynos4_busfreq_id, .driver = { .name = "exynos4-busfreq", diff --git a/drivers/firmware/dcdbas.c b/drivers/firmware/dcdbas.c index ea5ac2dc1233..8e77c02edb24 100644 --- a/drivers/firmware/dcdbas.c +++ b/drivers/firmware/dcdbas.c @@ -537,7 +537,7 @@ static struct attribute_group dcdbas_attr_group = { .attrs = dcdbas_dev_attrs, }; -static int __devinit dcdbas_probe(struct platform_device *dev) +static int dcdbas_probe(struct platform_device *dev) { int i, error; @@ -575,7 +575,7 @@ static int __devinit dcdbas_probe(struct platform_device *dev) return 0; } -static int __devexit dcdbas_remove(struct platform_device *dev) +static int dcdbas_remove(struct platform_device *dev) { int i; @@ -593,7 +593,7 @@ static struct platform_driver dcdbas_driver = { .owner = THIS_MODULE, }, .probe = dcdbas_probe, - .remove = __devexit_p(dcdbas_remove), + .remove = dcdbas_remove, }; /** diff --git a/drivers/gpio/gpio-da9055.c b/drivers/gpio/gpio-da9055.c index 55d83c7d9c7f..fd6dfe382f13 100644 --- a/drivers/gpio/gpio-da9055.c +++ b/drivers/gpio/gpio-da9055.c @@ -126,7 +126,7 @@ static int da9055_gpio_to_irq(struct gpio_chip *gc, u32 offset) DA9055_IRQ_GPI0 + offset); } -static struct gpio_chip reference_gp __devinitdata = { +static struct gpio_chip reference_gp = { .label = "da9055-gpio", .owner = THIS_MODULE, .get = da9055_gpio_get, @@ -139,7 +139,7 @@ static struct gpio_chip reference_gp __devinitdata = { .base = -1, }; -static int __devinit da9055_gpio_probe(struct platform_device *pdev) +static int da9055_gpio_probe(struct platform_device *pdev) { struct da9055_gpio *gpio; struct da9055_pdata *pdata; @@ -170,7 +170,7 @@ err_mem: return ret; } -static int __devexit da9055_gpio_remove(struct platform_device *pdev) +static int da9055_gpio_remove(struct platform_device *pdev) { struct da9055_gpio *gpio = platform_get_drvdata(pdev); @@ -179,7 +179,7 @@ static int __devexit da9055_gpio_remove(struct platform_device *pdev) static struct platform_driver da9055_gpio_driver = { .probe = da9055_gpio_probe, - .remove = __devexit_p(da9055_gpio_remove), + .remove = da9055_gpio_remove, .driver = { .name = "da9055-gpio", .owner = THIS_MODULE, diff --git a/drivers/gpio/gpio-ts5500.c b/drivers/gpio/gpio-ts5500.c index 0634ceea3c24..cc53cab8df2a 100644 --- a/drivers/gpio/gpio-ts5500.c +++ b/drivers/gpio/gpio-ts5500.c @@ -319,7 +319,7 @@ static void ts5500_disable_irq(struct ts5500_priv *priv) spin_unlock_irqrestore(&priv->lock, flags); } -static int __devinit ts5500_dio_probe(struct platform_device *pdev) +static int ts5500_dio_probe(struct platform_device *pdev) { enum ts5500_blocks block = platform_get_device_id(pdev)->driver_data; struct ts5500_dio_platform_data *pdata = pdev->dev.platform_data; @@ -432,7 +432,7 @@ cleanup: return ret; } -static int __devexit ts5500_dio_remove(struct platform_device *pdev) +static int ts5500_dio_remove(struct platform_device *pdev) { struct ts5500_priv *priv = platform_get_drvdata(pdev); @@ -455,7 +455,7 @@ static struct platform_driver ts5500_dio_driver = { .owner = THIS_MODULE, }, .probe = ts5500_dio_probe, - .remove = __devexit_p(ts5500_dio_remove), + .remove = ts5500_dio_remove, .id_table = ts5500_dio_ids, }; diff --git a/drivers/gpio/gpio-viperboard.c b/drivers/gpio/gpio-viperboard.c index 13772996cf24..59d72391de26 100644 --- a/drivers/gpio/gpio-viperboard.c +++ b/drivers/gpio/gpio-viperboard.c @@ -400,7 +400,7 @@ static int vprbrd_gpiob_direction_output(struct gpio_chip *chip, /* ----- end of gpio b chip ---------------------------------------------- */ -static int __devinit vprbrd_gpio_probe(struct platform_device *pdev) +static int vprbrd_gpio_probe(struct platform_device *pdev) { struct vprbrd *vb = dev_get_drvdata(pdev->dev.parent); struct vprbrd_gpio *vb_gpio; @@ -456,7 +456,7 @@ err_gpioa: return ret; } -static int __devexit vprbrd_gpio_remove(struct platform_device *pdev) +static int vprbrd_gpio_remove(struct platform_device *pdev) { struct vprbrd_gpio *vb_gpio = platform_get_drvdata(pdev); int ret; @@ -472,7 +472,7 @@ static struct platform_driver vprbrd_gpio_driver = { .driver.name = "viperboard-gpio", .driver.owner = THIS_MODULE, .probe = vprbrd_gpio_probe, - .remove = __devexit_p(vprbrd_gpio_remove), + .remove = vprbrd_gpio_remove, }; static int __init vprbrd_gpio_init(void) diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c index 9ef222442ca0..12e4fdc810bf 100644 --- a/drivers/hid/i2c-hid/i2c-hid.c +++ b/drivers/hid/i2c-hid/i2c-hid.c @@ -731,7 +731,7 @@ static struct hid_ll_driver i2c_hid_ll_driver = { .hidinput_input_event = i2c_hid_hidinput_input_event, }; -static int __devinit i2c_hid_init_irq(struct i2c_client *client) +static int i2c_hid_init_irq(struct i2c_client *client) { struct i2c_hid *ihid = i2c_get_clientdata(client); int ret; @@ -753,7 +753,7 @@ static int __devinit i2c_hid_init_irq(struct i2c_client *client) return 0; } -static int __devinit i2c_hid_fetch_hid_descriptor(struct i2c_hid *ihid) +static int i2c_hid_fetch_hid_descriptor(struct i2c_hid *ihid) { struct i2c_client *client = ihid->client; struct i2c_hid_desc *hdesc = &ihid->hdesc; @@ -810,8 +810,8 @@ static int __devinit i2c_hid_fetch_hid_descriptor(struct i2c_hid *ihid) return 0; } -static int __devinit i2c_hid_probe(struct i2c_client *client, - const struct i2c_device_id *dev_id) +static int i2c_hid_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) { int ret; struct i2c_hid *ihid; @@ -902,7 +902,7 @@ err: return ret; } -static int __devexit i2c_hid_remove(struct i2c_client *client) +static int i2c_hid_remove(struct i2c_client *client) { struct i2c_hid *ihid = i2c_get_clientdata(client); struct hid_device *hid; @@ -967,7 +967,7 @@ static struct i2c_driver i2c_hid_driver = { }, .probe = i2c_hid_probe, - .remove = __devexit_p(i2c_hid_remove), + .remove = i2c_hid_remove, .id_table = i2c_hid_id_table, }; diff --git a/drivers/hsi/clients/hsi_char.c b/drivers/hsi/clients/hsi_char.c index 3ad91f6447d8..e61e5f991aa5 100644 --- a/drivers/hsi/clients/hsi_char.c +++ b/drivers/hsi/clients/hsi_char.c @@ -675,7 +675,7 @@ static const struct file_operations hsc_fops = { .release = hsc_release, }; -static void __devinit hsc_channel_init(struct hsc_channel *channel) +static void hsc_channel_init(struct hsc_channel *channel) { init_waitqueue_head(&channel->rx_wait); init_waitqueue_head(&channel->tx_wait); @@ -685,7 +685,7 @@ static void __devinit hsc_channel_init(struct hsc_channel *channel) INIT_LIST_HEAD(&channel->tx_msgs_queue); } -static int __devinit hsc_probe(struct device *dev) +static int hsc_probe(struct device *dev) { const char devname[] = "hsi_char"; struct hsc_client_data *cl_data; @@ -744,7 +744,7 @@ out1: return ret; } -static int __devexit hsc_remove(struct device *dev) +static int hsc_remove(struct device *dev) { struct hsi_client *cl = to_hsi_client(dev); struct hsc_client_data *cl_data = hsi_client_drvdata(cl); @@ -763,7 +763,7 @@ static struct hsi_client_driver hsc_driver = { .name = "hsi_char", .owner = THIS_MODULE, .probe = hsc_probe, - .remove = __devexit_p(hsc_remove), + .remove = hsc_remove, }, }; diff --git a/drivers/hwmon/vexpress.c b/drivers/hwmon/vexpress.c index 59fd1268e58a..86d7f6d858b1 100644 --- a/drivers/hwmon/vexpress.c +++ b/drivers/hwmon/vexpress.c @@ -196,7 +196,7 @@ error: return err; } -static int __devexit vexpress_hwmon_remove(struct platform_device *pdev) +static int vexpress_hwmon_remove(struct platform_device *pdev) { struct vexpress_hwmon_data *data = platform_get_drvdata(pdev); const struct of_device_id *match; @@ -213,7 +213,7 @@ static int __devexit vexpress_hwmon_remove(struct platform_device *pdev) static struct platform_driver vexpress_hwmon_driver = { .probe = vexpress_hwmon_probe, - .remove = __devexit_p(vexpress_hwmon_remove), + .remove = vexpress_hwmon_remove, .driver = { .name = DRVNAME, .owner = THIS_MODULE, diff --git a/drivers/input/keyboard/tca8418_keypad.c b/drivers/input/keyboard/tca8418_keypad.c index 50e9c5e195e1..a34cc6714e5b 100644 --- a/drivers/input/keyboard/tca8418_keypad.c +++ b/drivers/input/keyboard/tca8418_keypad.c @@ -384,7 +384,7 @@ static const struct i2c_device_id tca8418_id[] = { MODULE_DEVICE_TABLE(i2c, tca8418_id); #ifdef CONFIG_OF -static const struct of_device_id tca8418_dt_ids[] __devinitconst = { +static const struct of_device_id tca8418_dt_ids[] = { { .compatible = "ti,tca8418", }, { } }; diff --git a/drivers/nfc/pn544/i2c.c b/drivers/nfc/pn544/i2c.c index 7da9071b68b6..2a9c8d93d2e8 100644 --- a/drivers/nfc/pn544/i2c.c +++ b/drivers/nfc/pn544/i2c.c @@ -361,8 +361,8 @@ static struct nfc_phy_ops i2c_phy_ops = { .disable = pn544_hci_i2c_disable, }; -static int __devinit pn544_hci_i2c_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int pn544_hci_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) { struct pn544_i2c_phy *phy; struct pn544_nfc_platform_data *pdata; @@ -442,7 +442,7 @@ err_phy_alloc: return r; } -static __devexit int pn544_hci_i2c_remove(struct i2c_client *client) +static int pn544_hci_i2c_remove(struct i2c_client *client) { struct pn544_i2c_phy *phy = i2c_get_clientdata(client); struct pn544_nfc_platform_data *pdata = client->dev.platform_data; @@ -469,7 +469,7 @@ static struct i2c_driver pn544_hci_i2c_driver = { }, .probe = pn544_hci_i2c_probe, .id_table = pn544_hci_i2c_id_table, - .remove = __devexit_p(pn544_hci_i2c_remove), + .remove = pn544_hci_i2c_remove, }; static int __init pn544_hci_i2c_init(void) diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c index fb6a1fe21b93..8e4e86b78428 100644 --- a/drivers/parisc/dino.c +++ b/drivers/parisc/dino.c @@ -430,7 +430,7 @@ static void dino_choose_irq(struct parisc_device *dev, void *ctrl) * Cirrus 6832 Cardbus reports wrong irq on RDI Tadpole PARISC Laptop (deller@gmx.de) * (the irqs are off-by-one, not sure yet if this is a cirrus, dino-hardware or dino-driver problem...) */ -static void __devinit quirk_cirrus_cardbus(struct pci_dev *dev) +static void quirk_cirrus_cardbus(struct pci_dev *dev) { u8 new_irq = dev->irq - 1; printk(KERN_INFO "PCI: Cirrus Cardbus IRQ fixup for %s, from %d to %d\n", diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index fdd63a6a62d6..2ef7103270bb 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -34,7 +34,7 @@ #include #include #include -#include /* for __init and __devinit */ +#include /* for __init */ #include #include #include diff --git a/drivers/pps/clients/pps-gpio.c b/drivers/pps/clients/pps-gpio.c index 655055545479..2bf0c1b608dd 100644 --- a/drivers/pps/clients/pps-gpio.c +++ b/drivers/pps/clients/pps-gpio.c @@ -196,7 +196,7 @@ static int pps_gpio_remove(struct platform_device *pdev) static struct platform_driver pps_gpio_driver = { .probe = pps_gpio_probe, - .remove = __devexit_p(pps_gpio_remove), + .remove = pps_gpio_remove, .driver = { .name = PPS_GPIO_NAME, .owner = THIS_MODULE diff --git a/drivers/ps3/ps3-lpm.c b/drivers/ps3/ps3-lpm.c index 643697f71390..b139b7792e9f 100644 --- a/drivers/ps3/ps3-lpm.c +++ b/drivers/ps3/ps3-lpm.c @@ -1185,7 +1185,7 @@ int ps3_lpm_close(void) } EXPORT_SYMBOL_GPL(ps3_lpm_close); -static int __devinit ps3_lpm_probe(struct ps3_system_bus_device *dev) +static int ps3_lpm_probe(struct ps3_system_bus_device *dev) { dev_dbg(&dev->core, " -> %s:%u\n", __func__, __LINE__); diff --git a/drivers/ps3/ps3-sys-manager.c b/drivers/ps3/ps3-sys-manager.c index 1b98367110c4..f2ab435954f6 100644 --- a/drivers/ps3/ps3-sys-manager.c +++ b/drivers/ps3/ps3-sys-manager.c @@ -706,7 +706,7 @@ static void ps3_sys_manager_work(struct ps3_system_bus_device *dev) ps3_vuart_read_async(dev, PS3_SM_RX_MSG_LEN_MIN); } -static int __devinit ps3_sys_manager_probe(struct ps3_system_bus_device *dev) +static int ps3_sys_manager_probe(struct ps3_system_bus_device *dev) { int result; struct ps3_sys_manager_ops ops; diff --git a/drivers/ps3/ps3av.c b/drivers/ps3/ps3av.c index 93d0a8b7718a..437fc35beb7b 100644 --- a/drivers/ps3/ps3av.c +++ b/drivers/ps3/ps3av.c @@ -932,7 +932,7 @@ int ps3av_audio_mute(int mute) } EXPORT_SYMBOL_GPL(ps3av_audio_mute); -static int __devinit ps3av_probe(struct ps3_system_bus_device *dev) +static int ps3av_probe(struct ps3_system_bus_device *dev) { int res; int id; diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c index 32c289c2ba13..0e396c155b3b 100644 --- a/drivers/remoteproc/omap_remoteproc.c +++ b/drivers/remoteproc/omap_remoteproc.c @@ -179,7 +179,7 @@ static struct rproc_ops omap_rproc_ops = { .kick = omap_rproc_kick, }; -static int __devinit omap_rproc_probe(struct platform_device *pdev) +static int omap_rproc_probe(struct platform_device *pdev) { struct omap_rproc_pdata *pdata = pdev->dev.platform_data; struct omap_rproc *oproc; @@ -213,7 +213,7 @@ free_rproc: return ret; } -static int __devexit omap_rproc_remove(struct platform_device *pdev) +static int omap_rproc_remove(struct platform_device *pdev) { struct rproc *rproc = platform_get_drvdata(pdev); @@ -225,7 +225,7 @@ static int __devexit omap_rproc_remove(struct platform_device *pdev) static struct platform_driver omap_rproc_driver = { .probe = omap_rproc_probe, - .remove = __devexit_p(omap_rproc_remove), + .remove = omap_rproc_remove, .driver = { .name = "omap-rproc", .owner = THIS_MODULE, diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c index 027096fe6a12..f1e323924f12 100644 --- a/drivers/rpmsg/virtio_rpmsg_bus.c +++ b/drivers/rpmsg/virtio_rpmsg_bus.c @@ -1022,7 +1022,7 @@ static int rpmsg_remove_device(struct device *dev, void *data) return 0; } -static void __devexit rpmsg_remove(struct virtio_device *vdev) +static void rpmsg_remove(struct virtio_device *vdev) { struct virtproc_info *vrp = vdev->priv; int ret; @@ -1063,7 +1063,7 @@ static struct virtio_driver virtio_ipc_driver = { .driver.owner = THIS_MODULE, .id_table = id_table, .probe = rpmsg_probe, - .remove = __devexit_p(rpmsg_remove), + .remove = rpmsg_remove, }; static int __init rpmsg_init(void) diff --git a/drivers/sh/pfc/gpio.c b/drivers/sh/pfc/gpio.c index 038fa071382a..6a24f07c2013 100644 --- a/drivers/sh/pfc/gpio.c +++ b/drivers/sh/pfc/gpio.c @@ -165,7 +165,7 @@ static int sh_pfc_gpio_match(struct gpio_chip *gc, void *data) return !!strstr(gc->label, data); } -static int __devinit sh_pfc_gpio_probe(struct platform_device *pdev) +static int sh_pfc_gpio_probe(struct platform_device *pdev) { struct sh_pfc_chip *chip; struct gpio_chip *gc; @@ -184,7 +184,7 @@ static int __devinit sh_pfc_gpio_probe(struct platform_device *pdev) return 0; } -static int __devexit sh_pfc_gpio_remove(struct platform_device *pdev) +static int sh_pfc_gpio_remove(struct platform_device *pdev) { struct sh_pfc_chip *chip = platform_get_drvdata(pdev); int ret; @@ -199,7 +199,7 @@ static int __devexit sh_pfc_gpio_remove(struct platform_device *pdev) static struct platform_driver sh_pfc_gpio_driver = { .probe = sh_pfc_gpio_probe, - .remove = __devexit_p(sh_pfc_gpio_remove), + .remove = sh_pfc_gpio_remove, .driver = { .name = KBUILD_MODNAME, .owner = THIS_MODULE, diff --git a/drivers/sh/pfc/pinctrl.c b/drivers/sh/pfc/pinctrl.c index 0646bf6e7889..4109b769eac0 100644 --- a/drivers/sh/pfc/pinctrl.c +++ b/drivers/sh/pfc/pinctrl.c @@ -328,10 +328,10 @@ static struct pinctrl_desc sh_pfc_pinctrl_desc = { .confops = &sh_pfc_pinconf_ops, }; -static inline void __devinit sh_pfc_map_one_gpio(struct sh_pfc *pfc, - struct sh_pfc_pinctrl *pmx, - struct pinmux_gpio *gpio, - unsigned offset) +static inline void sh_pfc_map_one_gpio(struct sh_pfc *pfc, + struct sh_pfc_pinctrl *pmx, + struct pinmux_gpio *gpio, + unsigned offset) { struct pinmux_data_reg *dummy; unsigned long flags; @@ -351,8 +351,7 @@ static inline void __devinit sh_pfc_map_one_gpio(struct sh_pfc *pfc, } /* pinmux ranges -> pinctrl pin descs */ -static int __devinit sh_pfc_map_gpios(struct sh_pfc *pfc, - struct sh_pfc_pinctrl *pmx) +static int sh_pfc_map_gpios(struct sh_pfc *pfc, struct sh_pfc_pinctrl *pmx) { unsigned long flags; int i; @@ -396,8 +395,7 @@ static int __devinit sh_pfc_map_gpios(struct sh_pfc *pfc, return 0; } -static int __devinit sh_pfc_map_functions(struct sh_pfc *pfc, - struct sh_pfc_pinctrl *pmx) +static int sh_pfc_map_functions(struct sh_pfc *pfc, struct sh_pfc_pinctrl *pmx) { unsigned long flags; int i, fn; @@ -421,7 +419,7 @@ static int __devinit sh_pfc_map_functions(struct sh_pfc *pfc, return 0; } -static int __devinit sh_pfc_pinctrl_probe(struct platform_device *pdev) +static int sh_pfc_pinctrl_probe(struct platform_device *pdev) { struct sh_pfc *pfc; int ret; @@ -465,7 +463,7 @@ free_pads: return ret; } -static int __devexit sh_pfc_pinctrl_remove(struct platform_device *pdev) +static int sh_pfc_pinctrl_remove(struct platform_device *pdev) { struct sh_pfc_pinctrl *pmx = platform_get_drvdata(pdev); @@ -482,7 +480,7 @@ static int __devexit sh_pfc_pinctrl_remove(struct platform_device *pdev) static struct platform_driver sh_pfc_pinctrl_driver = { .probe = sh_pfc_pinctrl_probe, - .remove = __devexit_p(sh_pfc_pinctrl_remove), + .remove = sh_pfc_pinctrl_remove, .driver = { .name = DRV_NAME, .owner = THIS_MODULE, diff --git a/drivers/sn/ioc3.c b/drivers/sn/ioc3.c index b3b33fa26acd..fb7ea0d9a734 100644 --- a/drivers/sn/ioc3.c +++ b/drivers/sn/ioc3.c @@ -575,11 +575,10 @@ void ioc3_unregister_submodule(struct ioc3_submodule *is) * Device management * *********************/ -static char * __devinitdata -ioc3_class_names[]={"unknown", "IP27 BaseIO", "IP30 system", "MENET 1/2/3", - "MENET 4", "CADduo", "Altix Serial"}; +static char *ioc3_class_names[] = { "unknown", "IP27 BaseIO", "IP30 system", + "MENET 1/2/3", "MENET 4", "CADduo", "Altix Serial" }; -static int __devinit ioc3_class(struct ioc3_driver_data *idd) +static int ioc3_class(struct ioc3_driver_data *idd) { int res = IOC3_CLASS_NONE; /* NIC-based logic */ @@ -602,8 +601,7 @@ static int __devinit ioc3_class(struct ioc3_driver_data *idd) return res; } /* Adds a new instance of an IOC3 card */ -static int __devinit -ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) +static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) { struct ioc3_driver_data *idd; uint32_t pcmd; @@ -755,7 +753,7 @@ out: } /* Removes a particular instance of an IOC3 card. */ -static void __devexit ioc3_remove(struct pci_dev *pdev) +static void ioc3_remove(struct pci_dev *pdev) { int id; struct ioc3_driver_data *idd; @@ -807,7 +805,7 @@ static struct pci_driver ioc3_driver = { .name = "IOC3", .id_table = ioc3_id_table, .probe = ioc3_probe, - .remove = __devexit_p(ioc3_remove), + .remove = ioc3_remove, }; MODULE_DEVICE_TABLE(pci, ioc3_id_table); -- cgit v1.2.3 From 4f73bc4dd3e8563ef4109f293a092820dff66d92 Mon Sep 17 00:00:00 2001 From: Joe Millenbach Date: Thu, 17 Jan 2013 22:44:22 -0800 Subject: tty: Added a CONFIG_TTY option to allow removal of TTY The option allows you to remove TTY and compile without errors. This saves space on systems that won't support TTY interfaces anyway. bloat-o-meter output is below. The bulk of this patch consists of Kconfig changes adding "depends on TTY" to various serial devices and similar drivers that require the TTY layer. Ideally, these dependencies would occur on a common intermediate symbol such as SERIO, but most drivers "select SERIO" rather than "depends on SERIO", and "select" does not respect dependencies. bloat-o-meter output comparing our previous minimal to new minimal by removing TTY. The list is filtered to not show removed entries with awk '$3 != "-"' as the list was very long. add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350) function old new delta chr_dev_init 166 170 +4 allow_signal 80 82 +2 static.__warned 143 142 -1 disallow_signal 63 62 -1 __set_special_pids 95 94 -1 unregister_console 126 121 -5 start_kernel 546 541 -5 register_console 593 588 -5 copy_from_user 45 40 -5 sys_setsid 128 120 -8 sys_vhangup 32 19 -13 do_exit 1543 1526 -17 bitmap_zero 60 40 -20 arch_local_irq_save 137 117 -20 release_task 674 652 -22 static.spin_unlock_irqrestore 308 260 -48 Signed-off-by: Joe Millenbach Reviewed-by: Jamey Sharp Reviewed-by: Josh Triplett Signed-off-by: Greg Kroah-Hartman --- arch/alpha/Kconfig | 2 ++ arch/ia64/hp/sim/Kconfig | 1 + arch/m68k/Kconfig.devices | 2 +- arch/parisc/Kconfig | 1 + arch/tile/Kconfig | 1 + arch/um/Kconfig.common | 1 + arch/xtensa/Kconfig | 1 + drivers/bluetooth/Kconfig | 1 + drivers/char/Kconfig | 7 +++--- drivers/char/pcmcia/Kconfig | 4 ++-- drivers/i2c/busses/Kconfig | 2 +- drivers/input/joystick/Kconfig | 4 ++++ drivers/input/keyboard/Kconfig | 10 ++++++++- drivers/input/mouse/Kconfig | 3 +++ drivers/input/serio/Kconfig | 1 + drivers/input/touchscreen/Kconfig | 22 +++++++++++++++++++ drivers/ipack/devices/Kconfig | 2 +- drivers/isdn/Kconfig | 1 + drivers/isdn/capi/Kconfig | 1 + drivers/isdn/gigaset/Kconfig | 1 + drivers/isdn/hardware/mISDN/Kconfig | 1 + drivers/lguest/Kconfig | 2 +- drivers/media/radio/wl128x/Kconfig | 2 +- drivers/misc/Kconfig | 2 +- drivers/misc/ti-st/Kconfig | 2 +- drivers/mmc/card/Kconfig | 1 + drivers/net/caif/Kconfig | 2 +- drivers/net/can/Kconfig | 2 +- drivers/net/hamradio/Kconfig | 4 ++-- drivers/net/irda/Kconfig | 2 +- drivers/net/ppp/Kconfig | 3 +++ drivers/net/slip/Kconfig | 1 + drivers/net/usb/Kconfig | 4 ++-- drivers/net/wan/Kconfig | 2 +- drivers/pps/clients/Kconfig | 2 +- drivers/s390/char/Kconfig | 8 +++---- drivers/staging/ccg/Kconfig | 2 +- drivers/staging/dgrp/Kconfig | 2 +- drivers/staging/fwserial/Kconfig | 2 +- drivers/staging/sb105x/Kconfig | 2 +- drivers/tty/Kconfig | 13 +++++++++++ drivers/tty/Makefile | 2 +- drivers/tty/hvc/Kconfig | 3 +++ drivers/tty/serial/Kconfig | 4 ++++ drivers/usb/class/Kconfig | 2 +- drivers/usb/gadget/Kconfig | 6 +++++ drivers/usb/serial/Kconfig | 2 +- fs/proc/Makefile | 3 ++- include/linux/console.h | 5 +++++ include/linux/proc_fs.h | 5 +++++ include/linux/tty.h | 44 +++++++++++++++++++++++++++---------- lib/Kconfig.kgdb | 1 + net/bluetooth/rfcomm/Kconfig | 1 + net/irda/ircomm/Kconfig | 2 +- sound/soc/codecs/Kconfig | 3 ++- 55 files changed, 165 insertions(+), 47 deletions(-) (limited to 'drivers/input') diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 9d5904cc7712..1ef196ddadeb 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -125,6 +125,7 @@ choice config ALPHA_GENERIC bool "Generic" + depends on TTY help A generic kernel will run on all supported Alpha hardware. @@ -491,6 +492,7 @@ config VGA_HOSE config ALPHA_SRM bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME + depends on TTY default y if ALPHA_JENSEN || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL ---help--- There are two different types of booting firmware on Alphas: SRM, diff --git a/arch/ia64/hp/sim/Kconfig b/arch/ia64/hp/sim/Kconfig index 8d513a8c5266..d84707d55203 100644 --- a/arch/ia64/hp/sim/Kconfig +++ b/arch/ia64/hp/sim/Kconfig @@ -8,6 +8,7 @@ config HP_SIMETH config HP_SIMSERIAL bool "Simulated serial driver support" + depends on TTY config HP_SIMSERIAL_CONSOLE bool "Console for HP simulator" diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices index c4cdfe444c64..4bc945dfe467 100644 --- a/arch/m68k/Kconfig.devices +++ b/arch/m68k/Kconfig.devices @@ -41,7 +41,7 @@ config NFBLOCK config NFCON tristate "NatFeat console driver" - depends on NATFEAT + depends on TTY && NATFEAT help Say Y to include support for the ARAnyM NatFeat console driver which allows the console output to be redirected to the stderr diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index b77feffbadea..df5beb639760 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -23,6 +23,7 @@ config PARISC select HAVE_MOD_ARCH_SPECIFIC select MODULES_USE_ELF_RELA select CLONE_BACKWARDS + select TTY # Needed for pdc_cons.c help The PA-RISC microprocessor is designed by Hewlett-Packard and used diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index 875d008828b8..ae8a7ca67fa4 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -121,6 +121,7 @@ config DEBUG_COPY_FROM_USER def_bool n config HVC_TILE + depends on TTY select HVC_DRIVER def_bool y diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common index 648121b037d5..bceee6623b00 100644 --- a/arch/um/Kconfig.common +++ b/arch/um/Kconfig.common @@ -12,6 +12,7 @@ config UML select GENERIC_CPU_DEVICES select GENERIC_IO select GENERIC_CLOCKEVENTS + select TTY # Needed for line.c config MMU bool diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 5aab1acabf1c..ad64c73b8675 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -132,6 +132,7 @@ choice config XTENSA_PLATFORM_ISS bool "ISS" + depends on TTY select XTENSA_CALIBRATE_CCOUNT select SERIAL_CONSOLE select XTENSA_ISS_NETWORK diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index e9f203eadb1f..fdfd61a2d523 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -26,6 +26,7 @@ config BT_HCIBTSDIO config BT_HCIUART tristate "HCI UART driver" + depends on TTY help Bluetooth HCI UART driver. This driver is required if you want to use Bluetooth devices with diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 72bedad6bf8c..3bb6fa3930be 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -53,7 +53,7 @@ source "drivers/tty/serial/Kconfig" config TTY_PRINTK bool "TTY driver to output user messages via printk" - depends on EXPERT + depends on EXPERT && TTY default n ---help--- If you say Y here, the support for writing user messages (i.e. @@ -159,7 +159,7 @@ source "drivers/tty/hvc/Kconfig" config VIRTIO_CONSOLE tristate "Virtio console" - depends on VIRTIO + depends on VIRTIO && TTY select HVC_DRIVER help Virtio console for use with lguest and other hypervisors. @@ -392,6 +392,7 @@ config XILINX_HWICAP config R3964 tristate "Siemens R3964 line discipline" + depends on TTY ---help--- This driver allows synchronous communication with devices using the Siemens R3964 packet protocol. Unless you are dealing with special @@ -439,7 +440,7 @@ source "drivers/char/pcmcia/Kconfig" config MWAVE tristate "ACP Modem (Mwave) support" - depends on X86 + depends on X86 && TTY select SERIAL_8250 ---help--- The ACP modem (Mwave) for Linux is a WinModem. It is composed of a diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig index 6614416a8623..2a166d56738a 100644 --- a/drivers/char/pcmcia/Kconfig +++ b/drivers/char/pcmcia/Kconfig @@ -7,7 +7,7 @@ menu "PCMCIA character devices" config SYNCLINK_CS tristate "SyncLink PC Card support" - depends on PCMCIA + depends on PCMCIA && TTY help Enable support for the SyncLink PC Card serial adapter, running asynchronous and HDLC communications up to 512Kbps. The port is @@ -45,7 +45,7 @@ config CARDMAN_4040 config IPWIRELESS tristate "IPWireless 3G UMTS PCMCIA card support" - depends on PCMCIA && NETDEVICES + depends on PCMCIA && NETDEVICES && TTY select PPP help This is a driver for 3G UMTS PCMCIA card from IPWireless company. In diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index bdca5111eb9d..cf474b2df4ae 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -803,7 +803,7 @@ config I2C_PARPORT_LIGHT config I2C_TAOS_EVM tristate "TAOS evaluation module" - depends on EXPERIMENTAL + depends on EXPERIMENTAL && TTY select SERIO select SERIO_SERPORT default n diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig index 56eb471b5576..055bcaba774c 100644 --- a/drivers/input/joystick/Kconfig +++ b/drivers/input/joystick/Kconfig @@ -132,6 +132,8 @@ config JOYSTICK_TMDC source "drivers/input/joystick/iforce/Kconfig" +if TTY + config JOYSTICK_WARRIOR tristate "Logitech WingMan Warrior joystick" select SERIO @@ -205,6 +207,8 @@ config JOYSTICK_ZHENHUA To compile this driver as a module, choose M here: the module will be called zhenhua. +endif # TTY + config JOYSTICK_DB9 tristate "Multisystem, Sega Genesis, Saturn joysticks and gamepads" depends on PARPORT diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 5a240c60342d..008f96aaf19e 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -69,6 +69,7 @@ config KEYBOARD_ATARI config KEYBOARD_ATKBD tristate "AT keyboard" if EXPERT || !X86 default y + depends on TTY select SERIO select SERIO_LIBPS2 select SERIO_I8042 if X86 @@ -153,6 +154,7 @@ config KEYBOARD_BFIN config KEYBOARD_LKKBD tristate "DECstation/VAXstation LK201/LK401 keyboard" + depends on TTY select SERIO help Say Y here if you want to use a LK201 or LK401 style serial @@ -268,7 +270,7 @@ config KEYBOARD_HIL_OLD config KEYBOARD_HIL tristate "HP HIL keyboard/pointer support" - depends on GSC || HP300 + depends on (GSC || HP300) && TTY default y select HP_SDC select HIL_MLC @@ -400,6 +402,7 @@ config KEYBOARD_IMX config KEYBOARD_NEWTON tristate "Newton keyboard" + depends on TTY select SERIO help Say Y here if you have a Newton keyboard on a serial port. @@ -479,6 +482,8 @@ config KEYBOARD_SAMSUNG To compile this driver as a module, choose M here: the module will be called samsung-keypad. +if TTY + config KEYBOARD_STOWAWAY tristate "Stowaway keyboard" select SERIO @@ -501,6 +506,8 @@ config KEYBOARD_SUNKBD To compile this driver as a module, choose M here: the module will be called sunkbd. +endif # TTY + config KEYBOARD_SH_KEYSC tristate "SuperH KEYSC keypad support" depends on SUPERH || ARCH_SHMOBILE @@ -597,6 +604,7 @@ config KEYBOARD_TWL4030 config KEYBOARD_XTKBD tristate "XT keyboard" + depends on TTY select SERIO help Say Y here if you want to use the old IBM PC/XT keyboard (or diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index cd6268cf7cd5..fc160f72dc4e 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -14,6 +14,7 @@ if INPUT_MOUSE config MOUSE_PS2 tristate "PS/2 mouse" + depends on TTY default y select SERIO select SERIO_LIBPS2 @@ -138,6 +139,7 @@ config MOUSE_PS2_OLPC config MOUSE_SERIAL tristate "Serial mouse" + depends on TTY select SERIO help Say Y here if you have a serial (RS-232, COM port) mouse connected @@ -262,6 +264,7 @@ config MOUSE_RISCPC config MOUSE_VSXXXAA tristate "DEC VSXXX-AA/GA mouse and VSXXX-AB tablet" + depends on TTY select SERIO help Say Y (or M) if you want to use a DEC VSXXX-AA (hockey diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index 4a4e182c33e7..81ee7551148e 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -4,6 +4,7 @@ config SERIO tristate "Serial I/O support" if EXPERT || !X86 default y + depends on TTY help Say Yes here if you have any input device that uses serial I/O to communicate with the system. This includes the diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 515cfe790543..3d6f548dd3d4 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -192,6 +192,8 @@ config TOUCHSCREEN_DA9052 To compile this driver as a module, choose M here: the module will be called da9052_tsi. +if TTY + config TOUCHSCREEN_DYNAPRO tristate "Dynapro serial touchscreen" select SERIO @@ -216,6 +218,8 @@ config TOUCHSCREEN_HAMPSHIRE To compile this driver as a module, choose M here: the module will be called hampshire. +endif # TTY + config TOUCHSCREEN_EETI tristate "EETI touchscreen panel support" depends on I2C @@ -237,6 +241,7 @@ config TOUCHSCREEN_EGALAX config TOUCHSCREEN_FUJITSU tristate "Fujitsu serial touchscreen" + depends on TTY select SERIO help Say Y here if you have the Fujitsu touchscreen (such as one @@ -275,6 +280,8 @@ config TOUCHSCREEN_S3C2410 To compile this driver as a module, choose M here: the module will be called s3c2410_ts. +if TTY + config TOUCHSCREEN_GUNZE tristate "Gunze AHL-51S touchscreen" select SERIO @@ -311,6 +318,8 @@ config TOUCHSCREEN_WACOM_W8001 To compile this driver as a module, choose M here: the module will be called wacom_w8001. +endif # TTY + config TOUCHSCREEN_WACOM_I2C tristate "Wacom Tablet support (I2C)" depends on I2C @@ -369,6 +378,8 @@ config TOUCHSCREEN_MMS114 To compile this driver as a module, choose M here: the module will be called mms114. +if TTY + config TOUCHSCREEN_MTOUCH tristate "MicroTouch serial touchscreens" select SERIO @@ -393,6 +404,8 @@ config TOUCHSCREEN_INEXIO To compile this driver as a module, choose M here: the module will be called inexio. +endif # TTY + config TOUCHSCREEN_INTEL_MID tristate "Intel MID platform resistive touchscreen" depends on INTEL_SCU_IPC @@ -450,6 +463,7 @@ config TOUCHSCREEN_HTCPEN config TOUCHSCREEN_PENMOUNT tristate "Penmount serial touchscreen" + depends on TTY select SERIO help Say Y here if you have a Penmount serial touchscreen connected to @@ -493,6 +507,8 @@ config TOUCHSCREEN_TNETV107X To compile this driver as a module, choose M here: the module will be called tnetv107x-ts. +if TTY + config TOUCHSCREEN_TOUCHRIGHT tristate "Touchright serial touchscreen" select SERIO @@ -517,6 +533,8 @@ config TOUCHSCREEN_TOUCHWIN To compile this driver as a module, choose M here: the module will be called touchwin. +endif # TTY + config TOUCHSCREEN_TI_AM335X_TSC tristate "TI Touchscreen Interface" depends on MFD_TI_AM335X_TSCADC @@ -790,6 +808,8 @@ config TOUCHSCREEN_USB_EASYTOUCH Say Y here if you have an EasyTouch USB Touch controller. If unsure, say N. +if TTY + config TOUCHSCREEN_TOUCHIT213 tristate "Sahara TouchIT-213 touchscreen" select SERIO @@ -813,6 +833,8 @@ config TOUCHSCREEN_TSC_SERIO To compile this driver as a module, choose M here: the module will be called tsc40. +endif # TTY + config TOUCHSCREEN_TSC2005 tristate "TSC2005 based touchscreens" depends on SPI_MASTER && GENERIC_HARDIRQS diff --git a/drivers/ipack/devices/Kconfig b/drivers/ipack/devices/Kconfig index 0b82fdc198c0..907a8cb48f2a 100644 --- a/drivers/ipack/devices/Kconfig +++ b/drivers/ipack/devices/Kconfig @@ -1,6 +1,6 @@ config SERIAL_IPOCTAL tristate "IndustryPack IP-OCTAL uart support" - depends on IPACK_BUS + depends on IPACK_BUS && TTY help This driver supports the IPOCTAL serial port device for the IndustryPack bus. default n diff --git a/drivers/isdn/Kconfig b/drivers/isdn/Kconfig index 86cd75a0e84d..ef661acdda17 100644 --- a/drivers/isdn/Kconfig +++ b/drivers/isdn/Kconfig @@ -22,6 +22,7 @@ if ISDN menuconfig ISDN_I4L tristate "Old ISDN4Linux (deprecated)" + depends on TTY ---help--- This driver allows you to use an ISDN adapter for networking connections and as dialin/out device. The isdn-tty's have a built diff --git a/drivers/isdn/capi/Kconfig b/drivers/isdn/capi/Kconfig index 15c3ffd9d860..f04686580040 100644 --- a/drivers/isdn/capi/Kconfig +++ b/drivers/isdn/capi/Kconfig @@ -18,6 +18,7 @@ config CAPI_TRACE config ISDN_CAPI_MIDDLEWARE bool "CAPI2.0 Middleware support" + depends on TTY help This option will enhance the capabilities of the /dev/capi20 interface. It will provide a means of moving a data connection, diff --git a/drivers/isdn/gigaset/Kconfig b/drivers/isdn/gigaset/Kconfig index b18a92c32184..dde5e09e6267 100644 --- a/drivers/isdn/gigaset/Kconfig +++ b/drivers/isdn/gigaset/Kconfig @@ -1,5 +1,6 @@ menuconfig ISDN_DRV_GIGASET tristate "Siemens Gigaset support" + depends on TTY select CRC_CCITT select BITREVERSE help diff --git a/drivers/isdn/hardware/mISDN/Kconfig b/drivers/isdn/hardware/mISDN/Kconfig index eadc1cd34a20..b8611e3e5e74 100644 --- a/drivers/isdn/hardware/mISDN/Kconfig +++ b/drivers/isdn/hardware/mISDN/Kconfig @@ -76,6 +76,7 @@ config MISDN_NETJET tristate "Support for NETJet cards" depends on MISDN depends on PCI + depends on TTY select MISDN_IPAC select ISDN_HDLC select ISDN_I4L diff --git a/drivers/lguest/Kconfig b/drivers/lguest/Kconfig index 34ae49dc557c..f9c43145a611 100644 --- a/drivers/lguest/Kconfig +++ b/drivers/lguest/Kconfig @@ -1,6 +1,6 @@ config LGUEST tristate "Linux hypervisor example code" - depends on X86_32 && EXPERIMENTAL && EVENTFD + depends on X86_32 && EXPERIMENTAL && EVENTFD && TTY select HVC_DRIVER ---help--- This is a very simple module which allows you to run diff --git a/drivers/media/radio/wl128x/Kconfig b/drivers/media/radio/wl128x/Kconfig index ea1e6545df36..f359be7e9dd9 100644 --- a/drivers/media/radio/wl128x/Kconfig +++ b/drivers/media/radio/wl128x/Kconfig @@ -4,7 +4,7 @@ menu "Texas Instruments WL128x FM driver (ST based)" config RADIO_WL128X tristate "Texas Instruments WL128x FM Radio" - depends on VIDEO_V4L2 && RFKILL && GPIOLIB + depends on VIDEO_V4L2 && RFKILL && GPIOLIB && TTY select TI_ST if NET help Choose Y here if you have this FM radio chip. diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index b151b7c1bd59..4b2bb939dde1 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -127,7 +127,7 @@ config PHANTOM config INTEL_MID_PTI tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard" - depends on PCI + depends on PCI && TTY default n help The PTI (Parallel Trace Interface) driver directs diff --git a/drivers/misc/ti-st/Kconfig b/drivers/misc/ti-st/Kconfig index abb5de1afce3..f34dcc514730 100644 --- a/drivers/misc/ti-st/Kconfig +++ b/drivers/misc/ti-st/Kconfig @@ -5,7 +5,7 @@ menu "Texas Instruments shared transport line discipline" config TI_ST tristate "Shared transport core driver" - depends on NET && GPIOLIB + depends on NET && GPIOLIB && TTY select FW_LOADER help This enables the shared transport core driver for TI diff --git a/drivers/mmc/card/Kconfig b/drivers/mmc/card/Kconfig index 3b1f783bf924..5562308699bc 100644 --- a/drivers/mmc/card/Kconfig +++ b/drivers/mmc/card/Kconfig @@ -52,6 +52,7 @@ config MMC_BLOCK_BOUNCE config SDIO_UART tristate "SDIO UART/GPS class support" + depends on TTY help SDIO function driver for SDIO cards that implements the UART class, as well as the GPS class which appears like a UART. diff --git a/drivers/net/caif/Kconfig b/drivers/net/caif/Kconfig index abf4d7a9dcce..60c2142373c9 100644 --- a/drivers/net/caif/Kconfig +++ b/drivers/net/caif/Kconfig @@ -6,7 +6,7 @@ comment "CAIF transport drivers" config CAIF_TTY tristate "CAIF TTY transport driver" - depends on CAIF + depends on CAIF && TTY default n ---help--- The CAIF TTY transport driver is a Line Discipline (ldisc) diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index b56bd9e80957..72df3a306a08 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -13,7 +13,7 @@ config CAN_VCAN config CAN_SLCAN tristate "Serial / USB serial CAN Adaptors (slcan)" - depends on CAN + depends on CAN && TTY ---help--- CAN driver for several 'low cost' CAN interfaces that are attached via serial lines or via USB-to-serial adapters using the LAWICEL diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig index 95dbcfdf131d..bf5e59687680 100644 --- a/drivers/net/hamradio/Kconfig +++ b/drivers/net/hamradio/Kconfig @@ -1,6 +1,6 @@ config MKISS tristate "Serial port KISS driver" - depends on AX25 + depends on AX25 && TTY select CRC16 ---help--- KISS is a protocol used for the exchange of data between a computer @@ -18,7 +18,7 @@ config MKISS config 6PACK tristate "Serial port 6PACK driver" - depends on AX25 + depends on AX25 && TTY ---help--- 6pack is a transmission protocol for the data exchange between your PC and your TNC (the Terminal Node Controller acts as a kind of diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index 595205406d73..e1454cdec14b 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -5,7 +5,7 @@ comment "SIR device drivers" config IRTTY_SIR tristate "IrTTY (uses Linux serial driver)" - depends on IRDA + depends on IRDA && TTY help Say Y here if you want to build support for the IrTTY line discipline. To compile it as a module, choose M here: the module diff --git a/drivers/net/ppp/Kconfig b/drivers/net/ppp/Kconfig index 872df3ef07a6..3d9ef4f1e600 100644 --- a/drivers/net/ppp/Kconfig +++ b/drivers/net/ppp/Kconfig @@ -147,6 +147,7 @@ config PPPOL2TP Support for PPP-over-L2TP socket family. L2TP is a protocol used by ISPs and enterprises to tunnel PPP traffic over UDP tunnels. L2TP is replacing PPTP for VPN uses. +if TTY config PPP_ASYNC tristate "PPP support for async serial ports" @@ -172,4 +173,6 @@ config PPP_SYNC_TTY To compile this driver as a module, choose M here. +endif # TTY + endif # PPP diff --git a/drivers/net/slip/Kconfig b/drivers/net/slip/Kconfig index 211b160e4e9c..48e68714eef3 100644 --- a/drivers/net/slip/Kconfig +++ b/drivers/net/slip/Kconfig @@ -4,6 +4,7 @@ config SLIP tristate "SLIP (serial line) support" + depends on TTY ---help--- Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to connect to your Internet service provider or to connect to some diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index ef976215b649..bd33153261ce 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -445,7 +445,7 @@ config USB_NET_QMI_WWAN config USB_HSO tristate "Option USB High Speed Mobile Devices" - depends on USB && RFKILL + depends on USB && RFKILL && TTY default n help Choose this option if you have an Option HSDPA/HSUPA card. @@ -493,7 +493,7 @@ config USB_SIERRA_NET config USB_VL600 tristate "LG VL600 modem dongle" - depends on USB_NET_CDCETHER + depends on USB_NET_CDCETHER && TTY select USB_ACM help Select this if you want to use an LG Electronics 4G/LTE usb modem diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index d58431e99f73..61eb8994b34f 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -429,7 +429,7 @@ config LAPBETHER config X25_ASY tristate "X.25 async driver (EXPERIMENTAL)" - depends on LAPB && X25 + depends on LAPB && X25 && TTY ---help--- Send and receive X.25 frames over regular asynchronous serial lines such as telephone lines equipped with ordinary modems. diff --git a/drivers/pps/clients/Kconfig b/drivers/pps/clients/Kconfig index 445197d4a8c4..6efd9b60d8ff 100644 --- a/drivers/pps/clients/Kconfig +++ b/drivers/pps/clients/Kconfig @@ -17,7 +17,7 @@ config PPS_CLIENT_KTIMER config PPS_CLIENT_LDISC tristate "PPS line discipline" - depends on PPS + depends on PPS && TTY help If you say yes here you get support for a PPS source connected with the CD (Carrier Detect) pin of your serial port. diff --git a/drivers/s390/char/Kconfig b/drivers/s390/char/Kconfig index 2c9a776bd63c..71bf959732fe 100644 --- a/drivers/s390/char/Kconfig +++ b/drivers/s390/char/Kconfig @@ -11,7 +11,7 @@ config TN3270 config TN3270_TTY def_tristate y prompt "Support for tty input/output on 3270 terminals" - depends on TN3270 + depends on TN3270 && TTY help Include support for using an IBM 3270 terminal as a Linux tty. @@ -33,7 +33,7 @@ config TN3270_CONSOLE config TN3215 def_bool y prompt "Support for 3215 line mode terminal" - depends on CCW + depends on CCW && TTY help Include support for IBM 3215 line-mode terminals. @@ -51,7 +51,7 @@ config CCW_CONSOLE config SCLP_TTY def_bool y prompt "Support for SCLP line mode terminal" - depends on S390 + depends on S390 && TTY help Include support for IBM SCLP line-mode terminals. @@ -66,7 +66,7 @@ config SCLP_CONSOLE config SCLP_VT220_TTY def_bool y prompt "Support for SCLP VT220-compatible terminal" - depends on S390 + depends on S390 && TTY help Include support for an IBM SCLP VT220-compatible terminal. diff --git a/drivers/staging/ccg/Kconfig b/drivers/staging/ccg/Kconfig index 8997a8c757aa..7ed5bc6caadb 100644 --- a/drivers/staging/ccg/Kconfig +++ b/drivers/staging/ccg/Kconfig @@ -2,7 +2,7 @@ if USB_GADGET config USB_G_CCG tristate "Configurable Composite Gadget (STAGING)" - depends on STAGING && BLOCK && NET && !USB_ZERO && !USB_ZERO_HNPTEST && !USB_AUDIO && !GADGET_UAC1 && !USB_ETH && !USB_ETH_RNDIS && !USB_ETH_EEM && !USB_G_NCM && !USB_GADGETFS && !USB_FUNCTIONFS && !USB_FUNCTIONFS_ETH && !USB_FUNCTIONFS_RNDIS && !USB_FUNCTIONFS_GENERIC && !USB_FILE_STORAGE && !USB_FILE_STORAGE_TEST && !USB_MASS_STORAGE && !USB_G_SERIAL && !USB_MIDI_GADGET && !USB_G_PRINTER && !USB_CDC_COMPOSITE && !USB_G_NOKIA && !USB_G_ACM_MS && !USB_G_MULTI && !USB_G_MULTI_RNDIS && !USB_G_MULTI_CDC && !USB_G_HID && !USB_G_DBGP && !USB_G_WEBCAM + depends on STAGING && BLOCK && NET && !USB_ZERO && !USB_ZERO_HNPTEST && !USB_AUDIO && !GADGET_UAC1 && !USB_ETH && !USB_ETH_RNDIS && !USB_ETH_EEM && !USB_G_NCM && !USB_GADGETFS && !USB_FUNCTIONFS && !USB_FUNCTIONFS_ETH && !USB_FUNCTIONFS_RNDIS && !USB_FUNCTIONFS_GENERIC && !USB_FILE_STORAGE && !USB_FILE_STORAGE_TEST && !USB_MASS_STORAGE && !USB_G_SERIAL && !USB_MIDI_GADGET && !USB_G_PRINTER && !USB_CDC_COMPOSITE && !USB_G_NOKIA && !USB_G_ACM_MS && !USB_G_MULTI && !USB_G_MULTI_RNDIS && !USB_G_MULTI_CDC && !USB_G_HID && !USB_G_DBGP && !USB_G_WEBCAM && TTY help The Configurable Composite Gadget supports multiple USB functions: acm, mass storage, rndis and FunctionFS. diff --git a/drivers/staging/dgrp/Kconfig b/drivers/staging/dgrp/Kconfig index 39f4bb65ec83..e4c41552923a 100644 --- a/drivers/staging/dgrp/Kconfig +++ b/drivers/staging/dgrp/Kconfig @@ -1,7 +1,7 @@ config DGRP tristate "Digi Realport driver" default n - depends on SYSFS + depends on SYSFS && TTY ---help--- Support for Digi Realport devices. These devices allow you to access remote serial ports as if they are local tty devices. This diff --git a/drivers/staging/fwserial/Kconfig b/drivers/staging/fwserial/Kconfig index 580406cb1808..9cdb3cdc4b66 100644 --- a/drivers/staging/fwserial/Kconfig +++ b/drivers/staging/fwserial/Kconfig @@ -1,6 +1,6 @@ config FIREWIRE_SERIAL tristate "TTY over Firewire" - depends on FIREWIRE + depends on FIREWIRE && TTY help This enables TTY over IEEE 1394, providing high-speed serial connectivity to cabled peers. diff --git a/drivers/staging/sb105x/Kconfig b/drivers/staging/sb105x/Kconfig index 3d0d0eb95b8c..6a2e1b78e844 100644 --- a/drivers/staging/sb105x/Kconfig +++ b/drivers/staging/sb105x/Kconfig @@ -1,7 +1,7 @@ config SB105X tristate "SystemBase PCI Multiport UART" select SERIAL_CORE - depends on PCI && BROKEN + depends on PCI && TTY && BROKEN help A driver for the SystemBase Multi-2/PCI serial card diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig index 0ecf22b6a38e..a79fd8ebd56e 100644 --- a/drivers/tty/Kconfig +++ b/drivers/tty/Kconfig @@ -1,3 +1,14 @@ +config TTY + bool "Enable TTY" if EXPERT + default y + ---help--- + Allows you to remove TTY support which can save space, and + blocks features that require TTY from inclusion in the kernel. + TTY is required for any text terminals or serial port + communication. Most users should leave this enabled. + +if TTY + config VT bool "Virtual terminal" if EXPERT depends on !S390 && !UML @@ -388,3 +399,5 @@ config PPC_EARLY_DEBUG_EHV_BC_HANDLE If the number you specify is not a valid byte channel handle, then there simply will be no early console output. This is true also if you don't boot under a hypervisor at all. + +endif # TTY diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile index 2953059530e4..df5663d0d55e 100644 --- a/drivers/tty/Makefile +++ b/drivers/tty/Makefile @@ -1,4 +1,4 @@ -obj-y += tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o \ +obj-$(CONFIG_TTY) += tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o \ tty_buffer.o tty_port.o tty_mutex.o obj-$(CONFIG_LEGACY_PTYS) += pty.o obj-$(CONFIG_UNIX98_PTYS) += pty.o diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig index f47b734c6a7a..8902f9b4df71 100644 --- a/drivers/tty/hvc/Kconfig +++ b/drivers/tty/hvc/Kconfig @@ -1,3 +1,5 @@ +if TTY + config HVC_DRIVER bool help @@ -119,3 +121,4 @@ config HVCS which will also be compiled when this driver is built as a module. +endif # TTY diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 2dc429357fe3..e9aeccdfbe35 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -2,6 +2,8 @@ # Serial device configuration # +if TTY + menu "Serial drivers" depends on HAS_IOMEM @@ -1483,3 +1485,5 @@ config SERIAL_RP2_NR_UARTS need to be increased. endmenu + +endif # TTY diff --git a/drivers/usb/class/Kconfig b/drivers/usb/class/Kconfig index 2519e320098f..316aac8e4ca1 100644 --- a/drivers/usb/class/Kconfig +++ b/drivers/usb/class/Kconfig @@ -6,7 +6,7 @@ comment "USB Device Class drivers" config USB_ACM tristate "USB Modem (CDC ACM) support" - depends on USB + depends on USB && TTY ---help--- This driver supports USB modems and ISDN adapters which support the Communication Device Class Abstract Control Model interface. diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 14625fd2cecd..a1bd951f9cb7 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -750,6 +750,7 @@ config USB_GADGET_TARGET config USB_G_SERIAL tristate "Serial Gadget (with CDC ACM and CDC OBEX support)" + depends on TTY select USB_LIBCOMPOSITE help The Serial Gadget talks to the Linux-USB generic serial driver. @@ -799,6 +800,8 @@ config USB_G_PRINTER For more information, see Documentation/usb/gadget_printer.txt which includes sample code for accessing the device file. +if TTY + config USB_CDC_COMPOSITE tristate "CDC Composite Device (Ethernet and ACM)" depends on NET @@ -879,6 +882,8 @@ config USB_G_MULTI_CDC If unsure, say "y". +endif # TTY + config USB_G_HID tristate "HID Gadget" select USB_LIBCOMPOSITE @@ -895,6 +900,7 @@ config USB_G_HID # Standalone / single function gadgets config USB_G_DBGP tristate "EHCI Debug Device Gadget" + depends on TTY select USB_LIBCOMPOSITE help This gadget emulates an EHCI Debug device. This is useful when you want diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 76f462241738..d8e35fe30b0c 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -4,7 +4,7 @@ menuconfig USB_SERIAL tristate "USB Serial Converter support" - depends on USB + depends on USB && TTY ---help--- Say Y here if you have a USB device that provides normal serial ports, or acts like a serial device, and you want to connect it to diff --git a/fs/proc/Makefile b/fs/proc/Makefile index 981b05601931..712f24db9600 100644 --- a/fs/proc/Makefile +++ b/fs/proc/Makefile @@ -8,7 +8,8 @@ proc-y := nommu.o task_nommu.o proc-$(CONFIG_MMU) := mmu.o task_mmu.o proc-y += inode.o root.o base.o generic.o array.o \ - proc_tty.o fd.o + fd.o +proc-$(CONFIG_TTY) += proc_tty.o proc-y += cmdline.o proc-y += consoles.o proc-y += cpuinfo.o diff --git a/include/linux/console.h b/include/linux/console.h index dedb082fe50f..3b709da1786e 100644 --- a/include/linux/console.h +++ b/include/linux/console.h @@ -157,7 +157,12 @@ extern int is_console_locked(void); extern int braille_register_console(struct console *, int index, char *console_options, char *braille_options); extern int braille_unregister_console(struct console *); +#ifdef CONFIG_TTY extern void console_sysfs_notify(void); +#else +static inline void console_sysfs_notify(void) +{ } +#endif extern bool console_suspend_enabled; /* Suspend and resume console messages over PM events */ diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h index 32676b35d2f5..3c22538aab66 100644 --- a/include/linux/proc_fs.h +++ b/include/linux/proc_fs.h @@ -127,7 +127,12 @@ extern void pid_ns_release_proc(struct pid_namespace *ns); * proc_tty.c */ struct tty_driver; +#ifdef CONFIG_TTY extern void proc_tty_init(void); +#else +static inline void proc_tty_init(void) +{ } +#endif extern void proc_tty_register_driver(struct tty_driver *driver); extern void proc_tty_unregister_driver(struct tty_driver *driver); diff --git a/include/linux/tty.h b/include/linux/tty.h index f89acd1ed6d3..c75d886b0307 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -318,11 +318,43 @@ struct tty_file_private { #define TTY_WRITE_FLUSH(tty) tty_write_flush((tty)) +#ifdef CONFIG_TTY +extern void console_init(void); +extern void tty_kref_put(struct tty_struct *tty); +extern struct pid *tty_get_pgrp(struct tty_struct *tty); +extern void tty_vhangup_self(void); +extern void disassociate_ctty(int priv); +extern dev_t tty_devnum(struct tty_struct *tty); +extern void proc_clear_tty(struct task_struct *p); +extern struct tty_struct *get_current_tty(void); +/* tty_io.c */ +extern int __init tty_init(void); +#else +static inline void console_init(void) +{ } +static inline void tty_kref_put(struct tty_struct *tty) +{ } +static inline struct pid *tty_get_pgrp(struct tty_struct *tty) +{ return NULL; } +static inline void tty_vhangup_self(void) +{ } +static inline void disassociate_ctty(int priv) +{ } +static inline dev_t tty_devnum(struct tty_struct *tty) +{ return 0; } +static inline void proc_clear_tty(struct task_struct *p) +{ } +static inline struct tty_struct *get_current_tty(void) +{ return NULL; } +/* tty_io.c */ +static inline int __init tty_init(void) +{ return 0; } +#endif + extern void tty_write_flush(struct tty_struct *); extern struct ktermios tty_std_termios; -extern void console_init(void); extern int vcs_init(void); extern struct class *tty_class; @@ -342,7 +374,6 @@ static inline struct tty_struct *tty_kref_get(struct tty_struct *tty) kref_get(&tty->kref); return tty; } -extern void tty_kref_put(struct tty_struct *tty); extern int tty_paranoia_check(struct tty_struct *tty, struct inode *inode, const char *routine); @@ -374,18 +405,15 @@ extern void tty_driver_remove_tty(struct tty_driver *driver, struct tty_struct *tty); extern void tty_free_termios(struct tty_struct *tty); extern int is_current_pgrp_orphaned(void); -extern struct pid *tty_get_pgrp(struct tty_struct *tty); extern int is_ignored(int sig); extern int tty_signal(int sig, struct tty_struct *tty); extern void tty_hangup(struct tty_struct *tty); extern void tty_vhangup(struct tty_struct *tty); extern void tty_vhangup_locked(struct tty_struct *tty); -extern void tty_vhangup_self(void); extern void tty_unhangup(struct file *filp); extern int tty_hung_up_p(struct file *filp); extern void do_SAK(struct tty_struct *tty); extern void __do_SAK(struct tty_struct *tty); -extern void disassociate_ctty(int priv); extern void no_tty(void); extern void tty_flush_to_ldisc(struct tty_struct *tty); extern void tty_buffer_free_all(struct tty_port *port); @@ -415,9 +443,6 @@ extern long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg); extern int tty_mode_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); extern int tty_perform_flush(struct tty_struct *tty, unsigned long arg); -extern dev_t tty_devnum(struct tty_struct *tty); -extern void proc_clear_tty(struct task_struct *p); -extern struct tty_struct *get_current_tty(void); extern void tty_default_fops(struct file_operations *fops); extern struct tty_struct *alloc_tty_struct(void); extern int tty_alloc_file(struct file *file); @@ -543,9 +568,6 @@ static inline int tty_audit_push_task(struct task_struct *tsk, } #endif -/* tty_io.c */ -extern int __init tty_init(void); - /* tty_ioctl.c */ extern int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); diff --git a/lib/Kconfig.kgdb b/lib/Kconfig.kgdb index 43cb93fa2651..30894fab84d6 100644 --- a/lib/Kconfig.kgdb +++ b/lib/Kconfig.kgdb @@ -22,6 +22,7 @@ config KGDB_SERIAL_CONSOLE tristate "KGDB: use kgdb over the serial console" select CONSOLE_POLL select MAGIC_SYSRQ + depends on TTY default y help Share a serial console with kgdb. Sysrq-g must be used diff --git a/net/bluetooth/rfcomm/Kconfig b/net/bluetooth/rfcomm/Kconfig index 22e718b554e4..18d352ea2bc7 100644 --- a/net/bluetooth/rfcomm/Kconfig +++ b/net/bluetooth/rfcomm/Kconfig @@ -12,6 +12,7 @@ config BT_RFCOMM config BT_RFCOMM_TTY bool "RFCOMM TTY support" depends on BT_RFCOMM + depends on TTY help This option enables TTY emulation support for RFCOMM channels. diff --git a/net/irda/ircomm/Kconfig b/net/irda/ircomm/Kconfig index 2d4c6b4a78d6..19492c1707b7 100644 --- a/net/irda/ircomm/Kconfig +++ b/net/irda/ircomm/Kconfig @@ -1,6 +1,6 @@ config IRCOMM tristate "IrCOMM protocol" - depends on IRDA + depends on IRDA && TTY help Say Y here if you want to build support for the IrCOMM protocol. To compile it as modules, choose M here: the modules will be diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 3a847828932a..298822c0ad65 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -34,7 +34,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_CS42L73 if I2C select SND_SOC_CS4270 if I2C select SND_SOC_CS4271 if SND_SOC_I2C_AND_SPI - select SND_SOC_CX20442 + select SND_SOC_CX20442 if TTY select SND_SOC_DA7210 if I2C select SND_SOC_DA732X if I2C select SND_SOC_DA9055 if I2C @@ -236,6 +236,7 @@ config SND_SOC_CS4271 config SND_SOC_CX20442 tristate + depends on TTY config SND_SOC_JZ4740_CODEC select REGMAP_MMIO -- cgit v1.2.3 From 8d1cbc98838b252af68204780bb0bfac4fe850ec Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 21 Jan 2013 11:09:05 +0100 Subject: Input: Convert to devm_ioremap_resource() Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Thierry Reding Acked-by: Dmitry Torokhov Acked-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman --- drivers/input/keyboard/spear-keyboard.c | 8 +++----- drivers/input/serio/arc_ps2.c | 7 ++++--- 2 files changed, 7 insertions(+), 8 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c index 695d237417d6..cb1e8f614631 100644 --- a/drivers/input/keyboard/spear-keyboard.c +++ b/drivers/input/keyboard/spear-keyboard.c @@ -228,11 +228,9 @@ static int spear_kbd_probe(struct platform_device *pdev) kbd->suspended_rate = pdata->suspended_rate; } - kbd->io_base = devm_request_and_ioremap(&pdev->dev, res); - if (!kbd->io_base) { - dev_err(&pdev->dev, "request-ioremap failed for kbd_region\n"); - return -ENOMEM; - } + kbd->io_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(kbd->io_base)) + return PTR_ERR(kbd->io_base); kbd->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(kbd->clk)) diff --git a/drivers/input/serio/arc_ps2.c b/drivers/input/serio/arc_ps2.c index b571eb3e4efc..c52e3e589f72 100644 --- a/drivers/input/serio/arc_ps2.c +++ b/drivers/input/serio/arc_ps2.c @@ -8,6 +8,7 @@ * Driver is originally developed by Pavel Sokolov */ +#include #include #include #include @@ -206,9 +207,9 @@ static int arc_ps2_probe(struct platform_device *pdev) return -ENOMEM; } - arc_ps2->addr = devm_request_and_ioremap(&pdev->dev, res); - if (!arc_ps2->addr) - return -EBUSY; + arc_ps2->addr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(arc_ps2->addr)) + return PTR_ERR(arc_ps2->addr); dev_info(&pdev->dev, "irq = %d, address = 0x%p, ports = %i\n", irq, arc_ps2->addr, ARC_PS2_PORTS); -- cgit v1.2.3 From 51fac8388a0325a43f0ae67453ece2c373e2ec28 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 24 Jan 2013 00:24:48 +0100 Subject: ACPI: Remove useless type argument of driver .remove() operation The second argument of ACPI driver .remove() operation is only used by the ACPI processor driver and the value passed to that driver through it is always available from the given struct acpi_device object's removal_type field. For this reason, the second ACPI driver .remove() argument is in fact useless, so drop it. Signed-off-by: Rafael J. Wysocki Reviewed-by: Jiang Liu Acked-by: Toshi Kani Acked-by: Yinghai Lu --- arch/ia64/hp/common/aml_nfw.c | 2 +- arch/x86/platform/olpc/olpc-xo15-sci.c | 2 +- drivers/acpi/ac.c | 4 ++-- drivers/acpi/acpi_memhotplug.c | 4 ++-- drivers/acpi/acpi_pad.c | 3 +-- drivers/acpi/battery.c | 2 +- drivers/acpi/button.c | 4 ++-- drivers/acpi/container.c | 4 ++-- drivers/acpi/ec.c | 2 +- drivers/acpi/fan.c | 4 ++-- drivers/acpi/hed.c | 2 +- drivers/acpi/pci_link.c | 4 ++-- drivers/acpi/pci_root.c | 4 ++-- drivers/acpi/processor_driver.c | 6 +++--- drivers/acpi/sbs.c | 6 +++--- drivers/acpi/sbshc.c | 4 ++-- drivers/acpi/scan.c | 5 ++--- drivers/acpi/thermal.c | 4 ++-- drivers/acpi/video.c | 4 ++-- drivers/char/hpet.c | 2 +- drivers/char/sonypi.c | 2 +- drivers/hwmon/acpi_power_meter.c | 2 +- drivers/hwmon/asus_atk0110.c | 4 ++-- drivers/i2c/busses/i2c-scmi.c | 2 +- drivers/input/misc/atlas_btns.c | 2 +- drivers/platform/x86/asus-laptop.c | 2 +- drivers/platform/x86/classmate-laptop.c | 10 +++++----- drivers/platform/x86/eeepc-laptop.c | 2 +- drivers/platform/x86/fujitsu-laptop.c | 4 ++-- drivers/platform/x86/fujitsu-tablet.c | 2 +- drivers/platform/x86/hp_accel.c | 2 +- drivers/platform/x86/ideapad-laptop.c | 2 +- drivers/platform/x86/intel_menlow.c | 2 +- drivers/platform/x86/panasonic-laptop.c | 4 ++-- drivers/platform/x86/sony-laptop.c | 4 ++-- drivers/platform/x86/topstar-laptop.c | 2 +- drivers/platform/x86/toshiba_acpi.c | 4 ++-- drivers/platform/x86/toshiba_bluetooth.c | 4 ++-- drivers/platform/x86/wmi.c | 4 ++-- drivers/platform/x86/xo15-ebook.c | 2 +- drivers/staging/quickstart/quickstart.c | 2 +- drivers/video/backlight/apple_bl.c | 2 +- drivers/xen/xen-acpi-pad.c | 3 +-- include/acpi/acpi_bus.h | 2 +- 44 files changed, 70 insertions(+), 73 deletions(-) (limited to 'drivers/input') diff --git a/arch/ia64/hp/common/aml_nfw.c b/arch/ia64/hp/common/aml_nfw.c index 6192f7188654..916ffe770bcf 100644 --- a/arch/ia64/hp/common/aml_nfw.c +++ b/arch/ia64/hp/common/aml_nfw.c @@ -191,7 +191,7 @@ static int aml_nfw_add(struct acpi_device *device) return aml_nfw_add_global_handler(); } -static int aml_nfw_remove(struct acpi_device *device, int type) +static int aml_nfw_remove(struct acpi_device *device) { return aml_nfw_remove_global_handler(); } diff --git a/arch/x86/platform/olpc/olpc-xo15-sci.c b/arch/x86/platform/olpc/olpc-xo15-sci.c index 2fdca25905ae..fef7d0ba7e3a 100644 --- a/arch/x86/platform/olpc/olpc-xo15-sci.c +++ b/arch/x86/platform/olpc/olpc-xo15-sci.c @@ -195,7 +195,7 @@ err_sysfs: return r; } -static int xo15_sci_remove(struct acpi_device *device, int type) +static int xo15_sci_remove(struct acpi_device *device) { acpi_disable_gpe(NULL, xo15_sci_gpe); acpi_remove_gpe_handler(NULL, xo15_sci_gpe, xo15_sci_gpe_handler); diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index d5fdd36190cc..6d5bf649196d 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -60,7 +60,7 @@ static int acpi_ac_open_fs(struct inode *inode, struct file *file); #endif static int acpi_ac_add(struct acpi_device *device); -static int acpi_ac_remove(struct acpi_device *device, int type); +static int acpi_ac_remove(struct acpi_device *device); static void acpi_ac_notify(struct acpi_device *device, u32 event); static const struct acpi_device_id ac_device_ids[] = { @@ -337,7 +337,7 @@ static int acpi_ac_resume(struct device *dev) } #endif -static int acpi_ac_remove(struct acpi_device *device, int type) +static int acpi_ac_remove(struct acpi_device *device) { struct acpi_ac *ac = NULL; diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c index 03d18f290118..94c823b25138 100644 --- a/drivers/acpi/acpi_memhotplug.c +++ b/drivers/acpi/acpi_memhotplug.c @@ -54,7 +54,7 @@ MODULE_LICENSE("GPL"); #define MEMORY_POWER_OFF_STATE 2 static int acpi_memory_device_add(struct acpi_device *device); -static int acpi_memory_device_remove(struct acpi_device *device, int type); +static int acpi_memory_device_remove(struct acpi_device *device); static const struct acpi_device_id memory_device_ids[] = { {ACPI_MEMORY_DEVICE_HID, 0}, @@ -415,7 +415,7 @@ static int acpi_memory_device_add(struct acpi_device *device) return result; } -static int acpi_memory_device_remove(struct acpi_device *device, int type) +static int acpi_memory_device_remove(struct acpi_device *device) { struct acpi_memory_device *mem_device = NULL; int result; diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c index 16fa979f7180..31de1043eea0 100644 --- a/drivers/acpi/acpi_pad.c +++ b/drivers/acpi/acpi_pad.c @@ -482,8 +482,7 @@ static int acpi_pad_add(struct acpi_device *device) return 0; } -static int acpi_pad_remove(struct acpi_device *device, - int type) +static int acpi_pad_remove(struct acpi_device *device) { mutex_lock(&isolated_cpus_lock); acpi_pad_idle_cpus(0); diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 7efaeaa53b88..c5cd5b5513e6 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -1111,7 +1111,7 @@ fail: return result; } -static int acpi_battery_remove(struct acpi_device *device, int type) +static int acpi_battery_remove(struct acpi_device *device) { struct acpi_battery *battery = NULL; diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index f0d936b65e37..86c7d5445c38 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -75,7 +75,7 @@ static const struct acpi_device_id button_device_ids[] = { MODULE_DEVICE_TABLE(acpi, button_device_ids); static int acpi_button_add(struct acpi_device *device); -static int acpi_button_remove(struct acpi_device *device, int type); +static int acpi_button_remove(struct acpi_device *device); static void acpi_button_notify(struct acpi_device *device, u32 event); #ifdef CONFIG_PM_SLEEP @@ -433,7 +433,7 @@ static int acpi_button_add(struct acpi_device *device) return error; } -static int acpi_button_remove(struct acpi_device *device, int type) +static int acpi_button_remove(struct acpi_device *device) { struct acpi_button *button = acpi_driver_data(device); diff --git a/drivers/acpi/container.c b/drivers/acpi/container.c index cc79d3e53a39..cc0bf4613e0d 100644 --- a/drivers/acpi/container.c +++ b/drivers/acpi/container.c @@ -52,7 +52,7 @@ MODULE_DESCRIPTION("ACPI container driver"); MODULE_LICENSE("GPL"); static int acpi_container_add(struct acpi_device *device); -static int acpi_container_remove(struct acpi_device *device, int type); +static int acpi_container_remove(struct acpi_device *device); static const struct acpi_device_id container_device_ids[] = { {"ACPI0004", 0}, @@ -125,7 +125,7 @@ static int acpi_container_add(struct acpi_device *device) return 0; } -static int acpi_container_remove(struct acpi_device *device, int type) +static int acpi_container_remove(struct acpi_device *device) { acpi_status status = AE_OK; struct acpi_container *pc = NULL; diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 354007d490d1..d45b2871d33b 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -852,7 +852,7 @@ static int acpi_ec_add(struct acpi_device *device) return ret; } -static int acpi_ec_remove(struct acpi_device *device, int type) +static int acpi_ec_remove(struct acpi_device *device) { struct acpi_ec *ec; struct acpi_ec_query_handler *handler, *tmp; diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c index 3bd6a54702d6..f815da82c765 100644 --- a/drivers/acpi/fan.c +++ b/drivers/acpi/fan.c @@ -45,7 +45,7 @@ MODULE_DESCRIPTION("ACPI Fan Driver"); MODULE_LICENSE("GPL"); static int acpi_fan_add(struct acpi_device *device); -static int acpi_fan_remove(struct acpi_device *device, int type); +static int acpi_fan_remove(struct acpi_device *device); static const struct acpi_device_id fan_device_ids[] = { {"PNP0C0B", 0}, @@ -172,7 +172,7 @@ static int acpi_fan_add(struct acpi_device *device) return result; } -static int acpi_fan_remove(struct acpi_device *device, int type) +static int acpi_fan_remove(struct acpi_device *device) { struct thermal_cooling_device *cdev = acpi_driver_data(device); diff --git a/drivers/acpi/hed.c b/drivers/acpi/hed.c index a0cc796932f7..13b1d39d7cdf 100644 --- a/drivers/acpi/hed.c +++ b/drivers/acpi/hed.c @@ -70,7 +70,7 @@ static int acpi_hed_add(struct acpi_device *device) return 0; } -static int acpi_hed_remove(struct acpi_device *device, int type) +static int acpi_hed_remove(struct acpi_device *device) { hed_handle = NULL; return 0; diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c index a12808259dfb..b6592797f5b2 100644 --- a/drivers/acpi/pci_link.c +++ b/drivers/acpi/pci_link.c @@ -54,7 +54,7 @@ ACPI_MODULE_NAME("pci_link"); #define ACPI_PCI_LINK_MAX_POSSIBLE 16 static int acpi_pci_link_add(struct acpi_device *device); -static int acpi_pci_link_remove(struct acpi_device *device, int type); +static int acpi_pci_link_remove(struct acpi_device *device); static const struct acpi_device_id link_device_ids[] = { {"PNP0C0F", 0}, @@ -766,7 +766,7 @@ static void irqrouter_resume(void) } } -static int acpi_pci_link_remove(struct acpi_device *device, int type) +static int acpi_pci_link_remove(struct acpi_device *device) { struct acpi_pci_link *link; diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 22a8458b4ec9..8890775e8b25 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -46,7 +46,7 @@ ACPI_MODULE_NAME("pci_root"); #define ACPI_PCI_ROOT_CLASS "pci_bridge" #define ACPI_PCI_ROOT_DEVICE_NAME "PCI Root Bridge" static int acpi_pci_root_add(struct acpi_device *device); -static int acpi_pci_root_remove(struct acpi_device *device, int type); +static int acpi_pci_root_remove(struct acpi_device *device); #define ACPI_PCIE_REQ_SUPPORT (OSC_EXT_PCI_CONFIG_SUPPORT \ | OSC_ACTIVE_STATE_PWR_SUPPORT \ @@ -627,7 +627,7 @@ end: return result; } -static int acpi_pci_root_remove(struct acpi_device *device, int type) +static int acpi_pci_root_remove(struct acpi_device *device) { acpi_status status; acpi_handle handle; diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index 9c5929a17d3a..c5d2fd85dbe0 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -81,7 +81,7 @@ MODULE_DESCRIPTION("ACPI Processor Driver"); MODULE_LICENSE("GPL"); static int acpi_processor_add(struct acpi_device *device); -static int acpi_processor_remove(struct acpi_device *device, int type); +static int acpi_processor_remove(struct acpi_device *device); static void acpi_processor_notify(struct acpi_device *device, u32 event); static acpi_status acpi_processor_hotadd_init(struct acpi_processor *pr); static int acpi_processor_handle_eject(struct acpi_processor *pr); @@ -610,7 +610,7 @@ err_free_pr: return result; } -static int acpi_processor_remove(struct acpi_device *device, int type) +static int acpi_processor_remove(struct acpi_device *device) { struct acpi_processor *pr = NULL; @@ -623,7 +623,7 @@ static int acpi_processor_remove(struct acpi_device *device, int type) if (pr->id >= nr_cpu_ids) goto free; - if (type == ACPI_BUS_REMOVAL_EJECT) { + if (device->removal_type == ACPI_BUS_REMOVAL_EJECT) { if (acpi_processor_handle_eject(pr)) return -EINVAL; } diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c index ff0740e0a9c2..e523245643ac 100644 --- a/drivers/acpi/sbs.c +++ b/drivers/acpi/sbs.c @@ -130,7 +130,7 @@ struct acpi_sbs { #define to_acpi_sbs(x) container_of(x, struct acpi_sbs, charger) -static int acpi_sbs_remove(struct acpi_device *device, int type); +static int acpi_sbs_remove(struct acpi_device *device); static int acpi_battery_get_state(struct acpi_battery *battery); static inline int battery_scale(int log) @@ -949,11 +949,11 @@ static int acpi_sbs_add(struct acpi_device *device) acpi_smbus_register_callback(sbs->hc, acpi_sbs_callback, sbs); end: if (result) - acpi_sbs_remove(device, 0); + acpi_sbs_remove(device); return result; } -static int acpi_sbs_remove(struct acpi_device *device, int type) +static int acpi_sbs_remove(struct acpi_device *device) { struct acpi_sbs *sbs; int id; diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c index cf6129a8af7c..b78bc605837e 100644 --- a/drivers/acpi/sbshc.c +++ b/drivers/acpi/sbshc.c @@ -33,7 +33,7 @@ struct acpi_smb_hc { }; static int acpi_smbus_hc_add(struct acpi_device *device); -static int acpi_smbus_hc_remove(struct acpi_device *device, int type); +static int acpi_smbus_hc_remove(struct acpi_device *device); static const struct acpi_device_id sbs_device_ids[] = { {"ACPI0001", 0}, @@ -296,7 +296,7 @@ static int acpi_smbus_hc_add(struct acpi_device *device) extern void acpi_ec_remove_query_handler(struct acpi_ec *ec, u8 query_bit); -static int acpi_smbus_hc_remove(struct acpi_device *device, int type) +static int acpi_smbus_hc_remove(struct acpi_device *device) { struct acpi_smb_hc *hc; diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index bc8077f173da..0989b323e65f 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -577,8 +577,7 @@ static int acpi_device_probe(struct device * dev) ret = acpi_device_install_notify_handler(acpi_dev); if (ret) { if (acpi_drv->ops.remove) - acpi_drv->ops.remove(acpi_dev, - acpi_dev->removal_type); + acpi_drv->ops.remove(acpi_dev); return ret; } } @@ -600,7 +599,7 @@ static int acpi_device_remove(struct device * dev) if (acpi_drv->ops.notify) acpi_device_remove_notify_handler(acpi_dev); if (acpi_drv->ops.remove) - acpi_drv->ops.remove(acpi_dev, acpi_dev->removal_type); + acpi_drv->ops.remove(acpi_dev); } acpi_dev->driver = NULL; acpi_dev->driver_data = NULL; diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 506fbd4b5733..da079d4e0baa 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -97,7 +97,7 @@ module_param(psv, int, 0644); MODULE_PARM_DESC(psv, "Disable or override all passive trip points."); static int acpi_thermal_add(struct acpi_device *device); -static int acpi_thermal_remove(struct acpi_device *device, int type); +static int acpi_thermal_remove(struct acpi_device *device); static void acpi_thermal_notify(struct acpi_device *device, u32 event); static const struct acpi_device_id thermal_device_ids[] = { @@ -1111,7 +1111,7 @@ end: return result; } -static int acpi_thermal_remove(struct acpi_device *device, int type) +static int acpi_thermal_remove(struct acpi_device *device) { struct acpi_thermal *tz = NULL; diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index ac9a69cd45f5..5be60ad8381f 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -88,7 +88,7 @@ module_param(use_bios_initial_backlight, bool, 0644); static int register_count = 0; static int acpi_video_bus_add(struct acpi_device *device); -static int acpi_video_bus_remove(struct acpi_device *device, int type); +static int acpi_video_bus_remove(struct acpi_device *device); static void acpi_video_bus_notify(struct acpi_device *device, u32 event); static const struct acpi_device_id video_device_ids[] = { @@ -1740,7 +1740,7 @@ static int acpi_video_bus_add(struct acpi_device *device) return error; } -static int acpi_video_bus_remove(struct acpi_device *device, int type) +static int acpi_video_bus_remove(struct acpi_device *device) { struct acpi_video_bus *video = NULL; diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index fe6d4be48296..e3f9a99b8522 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -1041,7 +1041,7 @@ static int hpet_acpi_add(struct acpi_device *device) return hpet_alloc(&data); } -static int hpet_acpi_remove(struct acpi_device *device, int type) +static int hpet_acpi_remove(struct acpi_device *device) { /* XXX need to unregister clocksource, dealloc mem, etc */ return -EINVAL; diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index d780295a1473..6386a98e43c1 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -1142,7 +1142,7 @@ static int sonypi_acpi_add(struct acpi_device *device) return 0; } -static int sonypi_acpi_remove(struct acpi_device *device, int type) +static int sonypi_acpi_remove(struct acpi_device *device) { sonypi_acpi_device = NULL; return 0; diff --git a/drivers/hwmon/acpi_power_meter.c b/drivers/hwmon/acpi_power_meter.c index 1672e2a5db46..6351aba8819c 100644 --- a/drivers/hwmon/acpi_power_meter.c +++ b/drivers/hwmon/acpi_power_meter.c @@ -911,7 +911,7 @@ exit: return res; } -static int acpi_power_meter_remove(struct acpi_device *device, int type) +static int acpi_power_meter_remove(struct acpi_device *device) { struct acpi_power_meter_resource *resource; diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c index 56dbcfb3e301..b25c64302cbc 100644 --- a/drivers/hwmon/asus_atk0110.c +++ b/drivers/hwmon/asus_atk0110.c @@ -190,7 +190,7 @@ struct atk_acpi_input_buf { }; static int atk_add(struct acpi_device *device); -static int atk_remove(struct acpi_device *device, int type); +static int atk_remove(struct acpi_device *device); static void atk_print_sensor(struct atk_data *data, union acpi_object *obj); static int atk_read_value(struct atk_sensor_data *sensor, u64 *value); static void atk_free_sensors(struct atk_data *data); @@ -1416,7 +1416,7 @@ out: return err; } -static int atk_remove(struct acpi_device *device, int type) +static int atk_remove(struct acpi_device *device) { struct atk_data *data = device->driver_data; dev_dbg(&device->dev, "removing...\n"); diff --git a/drivers/i2c/busses/i2c-scmi.c b/drivers/i2c/busses/i2c-scmi.c index 6aafa3d88ff0..c447e8d40b78 100644 --- a/drivers/i2c/busses/i2c-scmi.c +++ b/drivers/i2c/busses/i2c-scmi.c @@ -406,7 +406,7 @@ err: return -EIO; } -static int acpi_smbus_cmi_remove(struct acpi_device *device, int type) +static int acpi_smbus_cmi_remove(struct acpi_device *device) { struct acpi_smbus_cmi *smbus_cmi = acpi_driver_data(device); diff --git a/drivers/input/misc/atlas_btns.c b/drivers/input/misc/atlas_btns.c index 26f13131639a..5d4402365a52 100644 --- a/drivers/input/misc/atlas_btns.c +++ b/drivers/input/misc/atlas_btns.c @@ -121,7 +121,7 @@ static int atlas_acpi_button_add(struct acpi_device *device) return err; } -static int atlas_acpi_button_remove(struct acpi_device *device, int type) +static int atlas_acpi_button_remove(struct acpi_device *device) { acpi_status status; diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c index fcde4e528819..d9f9a0dbc6f3 100644 --- a/drivers/platform/x86/asus-laptop.c +++ b/drivers/platform/x86/asus-laptop.c @@ -1910,7 +1910,7 @@ fail_platform: return result; } -static int asus_acpi_remove(struct acpi_device *device, int type) +static int asus_acpi_remove(struct acpi_device *device) { struct asus_laptop *asus = acpi_driver_data(device); diff --git a/drivers/platform/x86/classmate-laptop.c b/drivers/platform/x86/classmate-laptop.c index c87ff16873f9..36e5e6c13db4 100644 --- a/drivers/platform/x86/classmate-laptop.c +++ b/drivers/platform/x86/classmate-laptop.c @@ -432,7 +432,7 @@ failed_sensitivity: return error; } -static int cmpc_accel_remove_v4(struct acpi_device *acpi, int type) +static int cmpc_accel_remove_v4(struct acpi_device *acpi) { struct input_dev *inputdev; struct cmpc_accel *accel; @@ -668,7 +668,7 @@ failed_file: return error; } -static int cmpc_accel_remove(struct acpi_device *acpi, int type) +static int cmpc_accel_remove(struct acpi_device *acpi) { struct input_dev *inputdev; struct cmpc_accel *accel; @@ -753,7 +753,7 @@ static int cmpc_tablet_add(struct acpi_device *acpi) cmpc_tablet_idev_init); } -static int cmpc_tablet_remove(struct acpi_device *acpi, int type) +static int cmpc_tablet_remove(struct acpi_device *acpi) { return cmpc_remove_acpi_notify_device(acpi); } @@ -1000,7 +1000,7 @@ out_bd: return retval; } -static int cmpc_ipml_remove(struct acpi_device *acpi, int type) +static int cmpc_ipml_remove(struct acpi_device *acpi) { struct ipml200_dev *ipml; @@ -1079,7 +1079,7 @@ static int cmpc_keys_add(struct acpi_device *acpi) cmpc_keys_idev_init); } -static int cmpc_keys_remove(struct acpi_device *acpi, int type) +static int cmpc_keys_remove(struct acpi_device *acpi) { return cmpc_remove_acpi_notify_device(acpi); } diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 528e9495458d..98935f945f53 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -1501,7 +1501,7 @@ fail_platform: return result; } -static int eeepc_acpi_remove(struct acpi_device *device, int type) +static int eeepc_acpi_remove(struct acpi_device *device) { struct eeepc_laptop *eeepc = acpi_driver_data(device); diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index c4c1a5444b38..1c9386e7c58c 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -733,7 +733,7 @@ err_stop: return result; } -static int acpi_fujitsu_remove(struct acpi_device *device, int type) +static int acpi_fujitsu_remove(struct acpi_device *device) { struct fujitsu_t *fujitsu = acpi_driver_data(device); struct input_dev *input = fujitsu->input; @@ -938,7 +938,7 @@ err_stop: return result; } -static int acpi_fujitsu_hotkey_remove(struct acpi_device *device, int type) +static int acpi_fujitsu_hotkey_remove(struct acpi_device *device) { struct fujitsu_hotkey_t *fujitsu_hotkey = acpi_driver_data(device); struct input_dev *input = fujitsu_hotkey->input; diff --git a/drivers/platform/x86/fujitsu-tablet.c b/drivers/platform/x86/fujitsu-tablet.c index 174ca01c4aa7..570926c10014 100644 --- a/drivers/platform/x86/fujitsu-tablet.c +++ b/drivers/platform/x86/fujitsu-tablet.c @@ -431,7 +431,7 @@ static int acpi_fujitsu_add(struct acpi_device *adev) return 0; } -static int acpi_fujitsu_remove(struct acpi_device *adev, int type) +static int acpi_fujitsu_remove(struct acpi_device *adev) { free_irq(fujitsu.irq, fujitsu_interrupt); release_region(fujitsu.io_base, fujitsu.io_length); diff --git a/drivers/platform/x86/hp_accel.c b/drivers/platform/x86/hp_accel.c index 18d74f29dcb2..e64a7a870d42 100644 --- a/drivers/platform/x86/hp_accel.c +++ b/drivers/platform/x86/hp_accel.c @@ -337,7 +337,7 @@ static int lis3lv02d_add(struct acpi_device *device) return ret; } -static int lis3lv02d_remove(struct acpi_device *device, int type) +static int lis3lv02d_remove(struct acpi_device *device) { if (!device) return -EINVAL; diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index 64bfb30a52e9..17f00b8dc5cb 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -834,7 +834,7 @@ platform_failed: return ret; } -static int ideapad_acpi_remove(struct acpi_device *adevice, int type) +static int ideapad_acpi_remove(struct acpi_device *adevice) { struct ideapad_private *priv = dev_get_drvdata(&adevice->dev); int i; diff --git a/drivers/platform/x86/intel_menlow.c b/drivers/platform/x86/intel_menlow.c index 3271ac85115e..d6cfc1558c2f 100644 --- a/drivers/platform/x86/intel_menlow.c +++ b/drivers/platform/x86/intel_menlow.c @@ -200,7 +200,7 @@ static int intel_menlow_memory_add(struct acpi_device *device) } -static int intel_menlow_memory_remove(struct acpi_device *device, int type) +static int intel_menlow_memory_remove(struct acpi_device *device) { struct thermal_cooling_device *cdev = acpi_driver_data(device); diff --git a/drivers/platform/x86/panasonic-laptop.c b/drivers/platform/x86/panasonic-laptop.c index 8e8caa767d6a..4add9a31bf60 100644 --- a/drivers/platform/x86/panasonic-laptop.c +++ b/drivers/platform/x86/panasonic-laptop.c @@ -176,7 +176,7 @@ enum SINF_BITS { SINF_NUM_BATTERIES = 0, /* R1 handles SINF_AC_CUR_BRIGHT as SINF_CUR_BRIGHT, doesn't know AC state */ static int acpi_pcc_hotkey_add(struct acpi_device *device); -static int acpi_pcc_hotkey_remove(struct acpi_device *device, int type); +static int acpi_pcc_hotkey_remove(struct acpi_device *device); static void acpi_pcc_hotkey_notify(struct acpi_device *device, u32 event); static const struct acpi_device_id pcc_device_ids[] = { @@ -663,7 +663,7 @@ static int __init acpi_pcc_init(void) return 0; } -static int acpi_pcc_hotkey_remove(struct acpi_device *device, int type) +static int acpi_pcc_hotkey_remove(struct acpi_device *device) { struct pcc_acpi *pcc = acpi_driver_data(device); diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index b8ad71f7863f..ceb41eff4230 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -2740,7 +2740,7 @@ outwalk: return result; } -static int sony_nc_remove(struct acpi_device *device, int type) +static int sony_nc_remove(struct acpi_device *device) { struct sony_nc_value *item; @@ -4111,7 +4111,7 @@ found: * ACPI driver * *****************/ -static int sony_pic_remove(struct acpi_device *device, int type) +static int sony_pic_remove(struct acpi_device *device) { struct sony_pic_ioport *io, *tmp_io; struct sony_pic_irq *irq, *tmp_irq; diff --git a/drivers/platform/x86/topstar-laptop.c b/drivers/platform/x86/topstar-laptop.c index d727bfee89a6..4ab618c63b45 100644 --- a/drivers/platform/x86/topstar-laptop.c +++ b/drivers/platform/x86/topstar-laptop.c @@ -157,7 +157,7 @@ add_err: return -ENODEV; } -static int acpi_topstar_remove(struct acpi_device *device, int type) +static int acpi_topstar_remove(struct acpi_device *device) { struct topstar_hkey *tps_hkey = acpi_driver_data(device); diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index c2727895794c..904476b2fa8f 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -1118,7 +1118,7 @@ static int toshiba_acpi_setup_backlight(struct toshiba_acpi_dev *dev) return 0; } -static int toshiba_acpi_remove(struct acpi_device *acpi_dev, int type) +static int toshiba_acpi_remove(struct acpi_device *acpi_dev) { struct toshiba_acpi_dev *dev = acpi_driver_data(acpi_dev); @@ -1250,7 +1250,7 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev) return 0; error: - toshiba_acpi_remove(acpi_dev, 0); + toshiba_acpi_remove(acpi_dev); return ret; } diff --git a/drivers/platform/x86/toshiba_bluetooth.c b/drivers/platform/x86/toshiba_bluetooth.c index e95be0b74859..74dd01ae343b 100644 --- a/drivers/platform/x86/toshiba_bluetooth.c +++ b/drivers/platform/x86/toshiba_bluetooth.c @@ -32,7 +32,7 @@ MODULE_LICENSE("GPL"); static int toshiba_bt_rfkill_add(struct acpi_device *device); -static int toshiba_bt_rfkill_remove(struct acpi_device *device, int type); +static int toshiba_bt_rfkill_remove(struct acpi_device *device); static void toshiba_bt_rfkill_notify(struct acpi_device *device, u32 event); static const struct acpi_device_id bt_device_ids[] = { @@ -122,7 +122,7 @@ static int toshiba_bt_rfkill_add(struct acpi_device *device) return result; } -static int toshiba_bt_rfkill_remove(struct acpi_device *device, int type) +static int toshiba_bt_rfkill_remove(struct acpi_device *device) { /* clean up */ return 0; diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c index 42a4dcc25f92..e4ac38aca580 100644 --- a/drivers/platform/x86/wmi.c +++ b/drivers/platform/x86/wmi.c @@ -92,7 +92,7 @@ module_param(debug_dump_wdg, bool, 0444); MODULE_PARM_DESC(debug_dump_wdg, "Dump available WMI interfaces [0/1]"); -static int acpi_wmi_remove(struct acpi_device *device, int type); +static int acpi_wmi_remove(struct acpi_device *device); static int acpi_wmi_add(struct acpi_device *device); static void acpi_wmi_notify(struct acpi_device *device, u32 event); @@ -917,7 +917,7 @@ static void acpi_wmi_notify(struct acpi_device *device, u32 event) } } -static int acpi_wmi_remove(struct acpi_device *device, int type) +static int acpi_wmi_remove(struct acpi_device *device) { acpi_remove_address_space_handler(device->handle, ACPI_ADR_SPACE_EC, &acpi_wmi_ec_space_handler); diff --git a/drivers/platform/x86/xo15-ebook.c b/drivers/platform/x86/xo15-ebook.c index 16d340c3b852..4b1377bd5944 100644 --- a/drivers/platform/x86/xo15-ebook.c +++ b/drivers/platform/x86/xo15-ebook.c @@ -150,7 +150,7 @@ static int ebook_switch_add(struct acpi_device *device) return error; } -static int ebook_switch_remove(struct acpi_device *device, int type) +static int ebook_switch_remove(struct acpi_device *device) { struct ebook_switch *button = acpi_driver_data(device); diff --git a/drivers/staging/quickstart/quickstart.c b/drivers/staging/quickstart/quickstart.c index cac320738142..adb8da564cf6 100644 --- a/drivers/staging/quickstart/quickstart.c +++ b/drivers/staging/quickstart/quickstart.c @@ -296,7 +296,7 @@ fail_config: return ret; } -static int quickstart_acpi_remove(struct acpi_device *device, int type) +static int quickstart_acpi_remove(struct acpi_device *device) { acpi_status status; struct quickstart_acpi *quickstart; diff --git a/drivers/video/backlight/apple_bl.c b/drivers/video/backlight/apple_bl.c index f088d4c07381..d84329676689 100644 --- a/drivers/video/backlight/apple_bl.c +++ b/drivers/video/backlight/apple_bl.c @@ -196,7 +196,7 @@ static int apple_bl_add(struct acpi_device *dev) return 0; } -static int apple_bl_remove(struct acpi_device *dev, int type) +static int apple_bl_remove(struct acpi_device *dev) { backlight_device_unregister(apple_backlight_device); diff --git a/drivers/xen/xen-acpi-pad.c b/drivers/xen/xen-acpi-pad.c index da39191e7278..c763479ed85e 100644 --- a/drivers/xen/xen-acpi-pad.c +++ b/drivers/xen/xen-acpi-pad.c @@ -140,8 +140,7 @@ static int acpi_pad_add(struct acpi_device *device) return 0; } -static int acpi_pad_remove(struct acpi_device *device, - int type) +static int acpi_pad_remove(struct acpi_device *device) { mutex_lock(&xen_cpu_lock); xen_acpi_pad_idle_cpus(0); diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 2c722deb2490..7714a1c2bbc5 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -89,7 +89,7 @@ struct acpi_device; */ typedef int (*acpi_op_add) (struct acpi_device * device); -typedef int (*acpi_op_remove) (struct acpi_device * device, int type); +typedef int (*acpi_op_remove) (struct acpi_device * device); typedef int (*acpi_op_start) (struct acpi_device * device); typedef void (*acpi_op_notify) (struct acpi_device * device, u32 event); -- cgit v1.2.3 From 61fd290d213e25d5a119b8ca25644001ed9f8f2d Mon Sep 17 00:00:00 2001 From: Prashant Gaikwad Date: Fri, 11 Jan 2013 13:16:26 +0530 Subject: ARM: tegra: migrate to new clock code Migrate Tegra clock support to drivers/clk/tegra, this involves moving: 1. definition of tegra_cpu_car_ops to clk.c 2. definition of reset functions to clk-peripheral.c 3. change parent of cpu clock. 4. Remove legacy clock initialization. 5. Initialize clocks using DT. 6. Remove all instance of mach/clk.h Signed-off-by: Prashant Gaikwad [swarren: use to_clk_periph_gate().] Signed-off-by: Stephen Warren --- arch/arm/mach-tegra/board-dt-tegra20.c | 30 ----------------------- arch/arm/mach-tegra/board-dt-tegra30.c | 31 ------------------------ arch/arm/mach-tegra/clock.c | 19 --------------- arch/arm/mach-tegra/common.c | 44 ++-------------------------------- arch/arm/mach-tegra/cpu-tegra.c | 2 +- arch/arm/mach-tegra/include/mach/clk.h | 3 --- arch/arm/mach-tegra/pcie.c | 2 +- arch/arm/mach-tegra/powergate.c | 2 +- drivers/clk/tegra/clk-periph.c | 38 +++++++++++++++++++++++++++++ drivers/clk/tegra/clk.c | 16 +++++++++++++ drivers/dma/tegra20-apb-dma.c | 2 +- drivers/gpu/drm/tegra/dc.c | 3 +-- drivers/gpu/drm/tegra/drm.c | 1 - drivers/gpu/drm/tegra/hdmi.c | 3 +-- drivers/i2c/busses/i2c-tegra.c | 3 +-- drivers/input/keyboard/tegra-kbc.c | 2 +- drivers/spi/spi-tegra20-sflash.c | 2 +- drivers/spi/spi-tegra20-slink.c | 2 +- drivers/staging/nvec/nvec.c | 3 +-- include/linux/clk/tegra.h | 5 ++++ sound/soc/tegra/tegra30_ahub.c | 2 +- 21 files changed, 73 insertions(+), 142 deletions(-) (limited to 'drivers/input') diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c index e1f87dd314ef..0c11b8af3af3 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/board-dt-tegra20.c @@ -42,7 +42,6 @@ #include #include "board.h" -#include "clock.h" #include "common.h" #include "iomap.h" @@ -104,37 +103,8 @@ static struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = { {} }; -static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = { - /* name parent rate enabled */ - { "uarta", "pll_p", 216000000, true }, - { "uartd", "pll_p", 216000000, true }, - { "usbd", "clk_m", 12000000, false }, - { "usb2", "clk_m", 12000000, false }, - { "usb3", "clk_m", 12000000, false }, - { "pll_a", "pll_p_out1", 56448000, true }, - { "pll_a_out0", "pll_a", 11289600, true }, - { "cdev1", NULL, 0, true }, - { "blink", "clk_32k", 32768, true }, - { "i2s1", "pll_a_out0", 11289600, false}, - { "i2s2", "pll_a_out0", 11289600, false}, - { "sdmmc1", "pll_p", 48000000, false}, - { "sdmmc3", "pll_p", 48000000, false}, - { "sdmmc4", "pll_p", 48000000, false}, - { "spi", "pll_p", 20000000, false }, - { "sbc1", "pll_p", 100000000, false }, - { "sbc2", "pll_p", 100000000, false }, - { "sbc3", "pll_p", 100000000, false }, - { "sbc4", "pll_p", 100000000, false }, - { "host1x", "pll_c", 150000000, false }, - { "disp1", "pll_p", 600000000, false }, - { "disp2", "pll_p", 600000000, false }, - { NULL, NULL, 0, 0}, -}; - static void __init tegra_dt_init(void) { - tegra_clk_init_from_table(tegra_dt_clk_init_table); - /* * Finished with the static registrations now; fill in the missing * devices diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c index cfe5fc02be77..92f6014d22a1 100644 --- a/arch/arm/mach-tegra/board-dt-tegra30.c +++ b/arch/arm/mach-tegra/board-dt-tegra30.c @@ -35,7 +35,6 @@ #include #include "board.h" -#include "clock.h" #include "common.h" #include "iomap.h" @@ -67,38 +66,8 @@ static struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = { {} }; -static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = { - /* name parent rate enabled */ - { "uarta", "pll_p", 408000000, true }, - { "pll_a", "pll_p_out1", 564480000, true }, - { "pll_a_out0", "pll_a", 11289600, true }, - { "extern1", "pll_a_out0", 0, true }, - { "clk_out_1", "extern1", 0, true }, - { "blink", "clk_32k", 32768, true }, - { "i2s0", "pll_a_out0", 11289600, false}, - { "i2s1", "pll_a_out0", 11289600, false}, - { "i2s2", "pll_a_out0", 11289600, false}, - { "i2s3", "pll_a_out0", 11289600, false}, - { "i2s4", "pll_a_out0", 11289600, false}, - { "sdmmc1", "pll_p", 48000000, false}, - { "sdmmc3", "pll_p", 48000000, false}, - { "sdmmc4", "pll_p", 48000000, false}, - { "sbc1", "pll_p", 100000000, false}, - { "sbc2", "pll_p", 100000000, false}, - { "sbc3", "pll_p", 100000000, false}, - { "sbc4", "pll_p", 100000000, false}, - { "sbc5", "pll_p", 100000000, false}, - { "sbc6", "pll_p", 100000000, false}, - { "host1x", "pll_c", 150000000, false}, - { "disp1", "pll_p", 600000000, false}, - { "disp2", "pll_p", 600000000, false}, - { NULL, NULL, 0, 0}, -}; - static void __init tegra30_dt_init(void) { - tegra_clk_init_from_table(tegra_dt_clk_init_table); - of_platform_populate(NULL, of_default_bus_match_table, tegra30_auxdata_lookup, NULL); } diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c index 8c0ff061f8cf..baa0c5b008f1 100644 --- a/arch/arm/mach-tegra/clock.c +++ b/arch/arm/mach-tegra/clock.c @@ -31,9 +31,6 @@ #include "board.h" #include "clock.h" -/* Global data of Tegra CPU CAR ops */ -struct tegra_cpu_car_ops *tegra_cpu_car_ops; - /* * Locking: * @@ -131,22 +128,6 @@ void tegra_clk_init_from_table(struct tegra_clk_init_table *table) tegra_clk_init_one_from_table(table); } -void tegra_periph_reset_deassert(struct clk *c) -{ - struct clk_tegra *clk = to_clk_tegra(__clk_get_hw(c)); - BUG_ON(!clk->reset); - clk->reset(__clk_get_hw(c), false); -} -EXPORT_SYMBOL(tegra_periph_reset_deassert); - -void tegra_periph_reset_assert(struct clk *c) -{ - struct clk_tegra *clk = to_clk_tegra(__clk_get_hw(c)); - BUG_ON(!clk->reset); - clk->reset(__clk_get_hw(c), true); -} -EXPORT_SYMBOL(tegra_periph_reset_assert); - /* Several extended clock configuration bits (e.g., clock routing, clock * phase control) are included in PLL and peripheral clock source * registers. */ diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 3efe80b2af28..87dd69ccdf8e 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -29,7 +30,6 @@ #include #include "board.h" -#include "clock.h" #include "common.h" #include "fuse.h" #include "iomap.h" @@ -65,6 +65,7 @@ static const struct of_device_id tegra_dt_irq_match[] __initconst = { void __init tegra_dt_init_irq(void) { + tegra_clocks_init(); tegra_init_irq(); of_irq_init(tegra_dt_irq_match); } @@ -80,43 +81,6 @@ void tegra_assert_system_reset(char mode, const char *cmd) writel_relaxed(reg, reset); } -#ifdef CONFIG_ARCH_TEGRA_2x_SOC -static __initdata struct tegra_clk_init_table tegra20_clk_init_table[] = { - /* name parent rate enabled */ - { "clk_m", NULL, 0, true }, - { "pll_p", "clk_m", 216000000, true }, - { "pll_p_out1", "pll_p", 28800000, true }, - { "pll_p_out2", "pll_p", 48000000, true }, - { "pll_p_out3", "pll_p", 72000000, true }, - { "pll_p_out4", "pll_p", 24000000, true }, - { "pll_c", "clk_m", 600000000, true }, - { "pll_c_out1", "pll_c", 120000000, true }, - { "sclk", "pll_c_out1", 120000000, true }, - { "hclk", "sclk", 120000000, true }, - { "pclk", "hclk", 60000000, true }, - { "csite", NULL, 0, true }, - { "emc", NULL, 0, true }, - { "cpu", NULL, 0, true }, - { NULL, NULL, 0, 0}, -}; -#endif - -#ifdef CONFIG_ARCH_TEGRA_3x_SOC -static __initdata struct tegra_clk_init_table tegra30_clk_init_table[] = { - /* name parent rate enabled */ - { "clk_m", NULL, 0, true }, - { "pll_p", "pll_ref", 408000000, true }, - { "pll_p_out1", "pll_p", 9600000, true }, - { "pll_p_out4", "pll_p", 102000000, true }, - { "sclk", "pll_p_out4", 102000000, true }, - { "hclk", "sclk", 102000000, true }, - { "pclk", "hclk", 51000000, true }, - { "csite", NULL, 0, true }, - { NULL, NULL, 0, 0}, -}; -#endif - - static void __init tegra_init_cache(void) { #ifdef CONFIG_CACHE_L2X0 @@ -141,8 +105,6 @@ void __init tegra20_init_early(void) tegra_cpu_reset_handler_init(); tegra_apb_io_init(); tegra_init_fuse(); - tegra2_init_clocks(); - tegra_clk_init_from_table(tegra20_clk_init_table); tegra_init_cache(); tegra_pmc_init(); tegra_powergate_init(); @@ -155,8 +117,6 @@ void __init tegra30_init_early(void) tegra_cpu_reset_handler_init(); tegra_apb_io_init(); tegra_init_fuse(); - tegra30_init_clocks(); - tegra_clk_init_from_table(tegra30_clk_init_table); tegra_init_cache(); tegra_pmc_init(); tegra_powergate_init(); diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c index 85d4a23bba03..ebffed67e2f5 100644 --- a/arch/arm/mach-tegra/cpu-tegra.c +++ b/arch/arm/mach-tegra/cpu-tegra.c @@ -266,7 +266,7 @@ static int __init tegra_cpufreq_init(void) if (IS_ERR(pll_x_clk)) return PTR_ERR(pll_x_clk); - pll_p_clk = clk_get_sys(NULL, "pll_p"); + pll_p_clk = clk_get_sys(NULL, "pll_p_cclk"); if (IS_ERR(pll_p_clk)) return PTR_ERR(pll_p_clk); diff --git a/arch/arm/mach-tegra/include/mach/clk.h b/arch/arm/mach-tegra/include/mach/clk.h index 95f3a547c770..85bbf10a7d0d 100644 --- a/arch/arm/mach-tegra/include/mach/clk.h +++ b/arch/arm/mach-tegra/include/mach/clk.h @@ -31,9 +31,6 @@ enum tegra_clk_ex_param { TEGRA_CLK_PLLD_MIPI_MUX_SEL, }; -void tegra_periph_reset_deassert(struct clk *c); -void tegra_periph_reset_assert(struct clk *c); - #ifndef CONFIG_COMMON_CLK unsigned long clk_get_rate_all_locked(struct clk *c); #endif diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c index bffcd643d7a3..b60165f1ca02 100644 --- a/arch/arm/mach-tegra/pcie.c +++ b/arch/arm/mach-tegra/pcie.c @@ -33,11 +33,11 @@ #include #include #include +#include #include #include -#include #include #include "board.h" diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c index 2cc1185d902e..c6bc8f85759c 100644 --- a/arch/arm/mach-tegra/powergate.c +++ b/arch/arm/mach-tegra/powergate.c @@ -26,8 +26,8 @@ #include #include #include +#include -#include #include #include "fuse.h" diff --git a/drivers/clk/tegra/clk-periph.c b/drivers/clk/tegra/clk-periph.c index 5978e81b175b..788486e6331a 100644 --- a/drivers/clk/tegra/clk-periph.c +++ b/drivers/clk/tegra/clk-periph.c @@ -110,6 +110,44 @@ static void clk_periph_disable(struct clk_hw *hw) gate_ops->disable(gate_hw); } +void tegra_periph_reset_deassert(struct clk *c) +{ + struct clk_hw *hw = __clk_get_hw(c); + struct tegra_clk_periph *periph = to_clk_periph(hw); + struct tegra_clk_periph_gate *gate; + + if (periph->magic != TEGRA_CLK_PERIPH_MAGIC) { + gate = to_clk_periph_gate(hw); + if (gate->magic != TEGRA_CLK_PERIPH_GATE_MAGIC) { + WARN_ON(1); + return; + } + } else { + gate = &periph->gate; + } + + tegra_periph_reset(gate, 0); +} + +void tegra_periph_reset_assert(struct clk *c) +{ + struct clk_hw *hw = __clk_get_hw(c); + struct tegra_clk_periph *periph = to_clk_periph(hw); + struct tegra_clk_periph_gate *gate; + + if (periph->magic != TEGRA_CLK_PERIPH_MAGIC) { + gate = to_clk_periph_gate(hw); + if (gate->magic != TEGRA_CLK_PERIPH_GATE_MAGIC) { + WARN_ON(1); + return; + } + } else { + gate = &periph->gate; + } + + tegra_periph_reset(gate, 1); +} + const struct clk_ops tegra_clk_periph_ops = { .get_parent = clk_periph_get_parent, .set_parent = clk_periph_set_parent, diff --git a/drivers/clk/tegra/clk.c b/drivers/clk/tegra/clk.c index cf023a937208..a603b9af0ad3 100644 --- a/drivers/clk/tegra/clk.c +++ b/drivers/clk/tegra/clk.c @@ -16,9 +16,14 @@ #include #include +#include +#include #include "clk.h" +/* Global data of Tegra CPU CAR ops */ +struct tegra_cpu_car_ops *tegra_cpu_car_ops; + void __init tegra_init_dup_clks(struct tegra_clk_duplicate *dup_list, struct clk *clks[], int clk_max) { @@ -67,3 +72,14 @@ void __init tegra_init_from_table(struct tegra_clk_init_table *tbl, } } } + +static const struct of_device_id tegra_dt_clk_match[] = { + { .compatible = "nvidia,tegra20-car", .data = tegra20_clock_init }, + { .compatible = "nvidia,tegra30-car", .data = tegra30_clock_init }, + { } +}; + +void __init tegra_clocks_init(void) +{ + of_clk_init(tegra_dt_clk_match); +} diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c index c39e61bc8172..afc9b89e20f4 100644 --- a/drivers/dma/tegra20-apb-dma.c +++ b/drivers/dma/tegra20-apb-dma.c @@ -31,8 +31,8 @@ #include #include #include +#include -#include #include "dmaengine.h" #define TEGRA_APBDMA_GENERAL 0x0 diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c index 656b2e3334a6..56813f967c8f 100644 --- a/drivers/gpu/drm/tegra/dc.c +++ b/drivers/gpu/drm/tegra/dc.c @@ -12,8 +12,7 @@ #include #include #include - -#include +#include #include "drm.h" #include "dc.h" diff --git a/drivers/gpu/drm/tegra/drm.c b/drivers/gpu/drm/tegra/drm.c index 3a503c9e4686..d980dc75788c 100644 --- a/drivers/gpu/drm/tegra/drm.c +++ b/drivers/gpu/drm/tegra/drm.c @@ -11,7 +11,6 @@ #include #include -#include #include #include diff --git a/drivers/gpu/drm/tegra/hdmi.c b/drivers/gpu/drm/tegra/hdmi.c index e060c7e6434d..92ad276cc5e0 100644 --- a/drivers/gpu/drm/tegra/hdmi.c +++ b/drivers/gpu/drm/tegra/hdmi.c @@ -14,8 +14,7 @@ #include #include #include - -#include +#include #include "hdmi.h" #include "drm.h" diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 7b38877ffec1..c7aca35e38fd 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -29,11 +29,10 @@ #include #include #include +#include #include -#include - #define TEGRA_I2C_TIMEOUT (msecs_to_jiffies(1000)) #define BYTES_PER_FIFO_WORD 4 diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c index c76f96872d31..54ac1dc7d477 100644 --- a/drivers/input/keyboard/tegra-kbc.c +++ b/drivers/input/keyboard/tegra-kbc.c @@ -30,7 +30,7 @@ #include #include #include -#include +#include #define KBC_MAX_DEBOUNCE_CNT 0x3ffu diff --git a/drivers/spi/spi-tegra20-sflash.c b/drivers/spi/spi-tegra20-sflash.c index 448a8cc71df3..02feaa51a0fa 100644 --- a/drivers/spi/spi-tegra20-sflash.c +++ b/drivers/spi/spi-tegra20-sflash.c @@ -34,7 +34,7 @@ #include #include #include -#include +#include #define SPI_COMMAND 0x000 #define SPI_GO BIT(30) diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c index 651167f2e0af..fa208a5cc612 100644 --- a/drivers/spi/spi-tegra20-slink.c +++ b/drivers/spi/spi-tegra20-slink.c @@ -35,7 +35,7 @@ #include #include #include -#include +#include #define SLINK_COMMAND 0x000 #define SLINK_BIT_LENGTH(x) (((x) & 0x1f) << 0) diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c index 2830946860d1..d51615b19797 100644 --- a/drivers/staging/nvec/nvec.c +++ b/drivers/staging/nvec/nvec.c @@ -37,8 +37,7 @@ #include #include #include - -#include +#include #include "nvec.h" diff --git a/include/linux/clk/tegra.h b/include/linux/clk/tegra.h index 0977f2a24757..a7e5a3999099 100644 --- a/include/linux/clk/tegra.h +++ b/include/linux/clk/tegra.h @@ -17,6 +17,8 @@ #ifndef __LINUX_CLK_TEGRA_H_ #define __LINUX_CLK_TEGRA_H_ +#include + /* * Tegra CPU clock and reset control ops * @@ -120,5 +122,8 @@ static inline void tegra_cpu_clock_resume(void) void tegra20_cpu_car_ops_init(void); void tegra30_cpu_car_ops_init(void); +void tegra_periph_reset_deassert(struct clk *c); +void tegra_periph_reset_assert(struct clk *c); +void tegra_clocks_init(void); #endif /* __LINUX_CLK_TEGRA_H_ */ diff --git a/sound/soc/tegra/tegra30_ahub.c b/sound/soc/tegra/tegra30_ahub.c index f354dc390a0b..bb31c4123a7b 100644 --- a/sound/soc/tegra/tegra30_ahub.c +++ b/sound/soc/tegra/tegra30_ahub.c @@ -25,7 +25,7 @@ #include #include #include -#include +#include #include #include "tegra30_ahub.h" -- cgit v1.2.3 From 84e4e46020cdb0e091858eb8263a2287880e2bad Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Fri, 1 Feb 2013 12:59:36 -0500 Subject: drivers/input/joystick/analog.c: enable precise timer Like nm10300, tile can just use get_cycles() for this. Signed-off-by: Chris Metcalf --- drivers/input/joystick/analog.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/input') diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c index 358cd7ee905b..7cd74e29cbc8 100644 --- a/drivers/input/joystick/analog.c +++ b/drivers/input/joystick/analog.c @@ -162,7 +162,7 @@ static unsigned int get_time_pit(void) #define GET_TIME(x) do { x = get_cycles(); } while (0) #define DELTA(x,y) ((y)-(x)) #define TIME_NAME "PCC" -#elif defined(CONFIG_MN10300) +#elif defined(CONFIG_MN10300) || defined(CONFIG_TILE) #define GET_TIME(x) do { x = get_cycles(); } while (0) #define DELTA(x, y) ((x) - (y)) #define TIME_NAME "TSC" -- cgit v1.2.3 From 238d9f6e551d87bd6fbcfa3069592dfb407937fb Mon Sep 17 00:00:00 2001 From: Joe Millenbach Date: Tue, 5 Feb 2013 17:58:34 -0800 Subject: input: drop unnecessary dependencies on TTY Backing out changes made in earlier TTY removal patch. Switched to only one dependency in SERPORT on TTY instead of many incorrect dependencies. Signed-off-by: Joe Millenbach Reported-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/input/joystick/Kconfig | 4 ---- drivers/input/keyboard/Kconfig | 10 +--------- drivers/input/mouse/Kconfig | 3 --- drivers/input/serio/Kconfig | 2 +- drivers/input/touchscreen/Kconfig | 22 ---------------------- 5 files changed, 2 insertions(+), 39 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig index 055bcaba774c..56eb471b5576 100644 --- a/drivers/input/joystick/Kconfig +++ b/drivers/input/joystick/Kconfig @@ -132,8 +132,6 @@ config JOYSTICK_TMDC source "drivers/input/joystick/iforce/Kconfig" -if TTY - config JOYSTICK_WARRIOR tristate "Logitech WingMan Warrior joystick" select SERIO @@ -207,8 +205,6 @@ config JOYSTICK_ZHENHUA To compile this driver as a module, choose M here: the module will be called zhenhua. -endif # TTY - config JOYSTICK_DB9 tristate "Multisystem, Sega Genesis, Saturn joysticks and gamepads" depends on PARPORT diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 008f96aaf19e..5a240c60342d 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -69,7 +69,6 @@ config KEYBOARD_ATARI config KEYBOARD_ATKBD tristate "AT keyboard" if EXPERT || !X86 default y - depends on TTY select SERIO select SERIO_LIBPS2 select SERIO_I8042 if X86 @@ -154,7 +153,6 @@ config KEYBOARD_BFIN config KEYBOARD_LKKBD tristate "DECstation/VAXstation LK201/LK401 keyboard" - depends on TTY select SERIO help Say Y here if you want to use a LK201 or LK401 style serial @@ -270,7 +268,7 @@ config KEYBOARD_HIL_OLD config KEYBOARD_HIL tristate "HP HIL keyboard/pointer support" - depends on (GSC || HP300) && TTY + depends on GSC || HP300 default y select HP_SDC select HIL_MLC @@ -402,7 +400,6 @@ config KEYBOARD_IMX config KEYBOARD_NEWTON tristate "Newton keyboard" - depends on TTY select SERIO help Say Y here if you have a Newton keyboard on a serial port. @@ -482,8 +479,6 @@ config KEYBOARD_SAMSUNG To compile this driver as a module, choose M here: the module will be called samsung-keypad. -if TTY - config KEYBOARD_STOWAWAY tristate "Stowaway keyboard" select SERIO @@ -506,8 +501,6 @@ config KEYBOARD_SUNKBD To compile this driver as a module, choose M here: the module will be called sunkbd. -endif # TTY - config KEYBOARD_SH_KEYSC tristate "SuperH KEYSC keypad support" depends on SUPERH || ARCH_SHMOBILE @@ -604,7 +597,6 @@ config KEYBOARD_TWL4030 config KEYBOARD_XTKBD tristate "XT keyboard" - depends on TTY select SERIO help Say Y here if you want to use the old IBM PC/XT keyboard (or diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index fc160f72dc4e..cd6268cf7cd5 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -14,7 +14,6 @@ if INPUT_MOUSE config MOUSE_PS2 tristate "PS/2 mouse" - depends on TTY default y select SERIO select SERIO_LIBPS2 @@ -139,7 +138,6 @@ config MOUSE_PS2_OLPC config MOUSE_SERIAL tristate "Serial mouse" - depends on TTY select SERIO help Say Y here if you have a serial (RS-232, COM port) mouse connected @@ -264,7 +262,6 @@ config MOUSE_RISCPC config MOUSE_VSXXXAA tristate "DEC VSXXX-AA/GA mouse and VSXXX-AB tablet" - depends on TTY select SERIO help Say Y (or M) if you want to use a DEC VSXXX-AA (hockey diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index 81ee7551148e..fe4e4953d5f5 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -4,7 +4,6 @@ config SERIO tristate "Serial I/O support" if EXPERT || !X86 default y - depends on TTY help Say Yes here if you have any input device that uses serial I/O to communicate with the system. This includes the @@ -37,6 +36,7 @@ config SERIO_I8042 config SERIO_SERPORT tristate "Serial port line discipline" default y + depends on TTY help Say Y here if you plan to use an input device (mouse, joystick, tablet, 6dof) that communicates over the RS232 serial (COM) port. diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 3d6f548dd3d4..515cfe790543 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -192,8 +192,6 @@ config TOUCHSCREEN_DA9052 To compile this driver as a module, choose M here: the module will be called da9052_tsi. -if TTY - config TOUCHSCREEN_DYNAPRO tristate "Dynapro serial touchscreen" select SERIO @@ -218,8 +216,6 @@ config TOUCHSCREEN_HAMPSHIRE To compile this driver as a module, choose M here: the module will be called hampshire. -endif # TTY - config TOUCHSCREEN_EETI tristate "EETI touchscreen panel support" depends on I2C @@ -241,7 +237,6 @@ config TOUCHSCREEN_EGALAX config TOUCHSCREEN_FUJITSU tristate "Fujitsu serial touchscreen" - depends on TTY select SERIO help Say Y here if you have the Fujitsu touchscreen (such as one @@ -280,8 +275,6 @@ config TOUCHSCREEN_S3C2410 To compile this driver as a module, choose M here: the module will be called s3c2410_ts. -if TTY - config TOUCHSCREEN_GUNZE tristate "Gunze AHL-51S touchscreen" select SERIO @@ -318,8 +311,6 @@ config TOUCHSCREEN_WACOM_W8001 To compile this driver as a module, choose M here: the module will be called wacom_w8001. -endif # TTY - config TOUCHSCREEN_WACOM_I2C tristate "Wacom Tablet support (I2C)" depends on I2C @@ -378,8 +369,6 @@ config TOUCHSCREEN_MMS114 To compile this driver as a module, choose M here: the module will be called mms114. -if TTY - config TOUCHSCREEN_MTOUCH tristate "MicroTouch serial touchscreens" select SERIO @@ -404,8 +393,6 @@ config TOUCHSCREEN_INEXIO To compile this driver as a module, choose M here: the module will be called inexio. -endif # TTY - config TOUCHSCREEN_INTEL_MID tristate "Intel MID platform resistive touchscreen" depends on INTEL_SCU_IPC @@ -463,7 +450,6 @@ config TOUCHSCREEN_HTCPEN config TOUCHSCREEN_PENMOUNT tristate "Penmount serial touchscreen" - depends on TTY select SERIO help Say Y here if you have a Penmount serial touchscreen connected to @@ -507,8 +493,6 @@ config TOUCHSCREEN_TNETV107X To compile this driver as a module, choose M here: the module will be called tnetv107x-ts. -if TTY - config TOUCHSCREEN_TOUCHRIGHT tristate "Touchright serial touchscreen" select SERIO @@ -533,8 +517,6 @@ config TOUCHSCREEN_TOUCHWIN To compile this driver as a module, choose M here: the module will be called touchwin. -endif # TTY - config TOUCHSCREEN_TI_AM335X_TSC tristate "TI Touchscreen Interface" depends on MFD_TI_AM335X_TSCADC @@ -808,8 +790,6 @@ config TOUCHSCREEN_USB_EASYTOUCH Say Y here if you have an EasyTouch USB Touch controller. If unsure, say N. -if TTY - config TOUCHSCREEN_TOUCHIT213 tristate "Sahara TouchIT-213 touchscreen" select SERIO @@ -833,8 +813,6 @@ config TOUCHSCREEN_TSC_SERIO To compile this driver as a module, choose M here: the module will be called tsc40. -endif # TTY - config TOUCHSCREEN_TSC2005 tristate "TSC2005 based touchscreens" depends on SPI_MASTER && GENERIC_HARDIRQS -- cgit v1.2.3 From e80beb27d2f81a1c3c8887e0e0a82d77bb392d28 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 12 Feb 2013 17:48:37 +0000 Subject: gpio: Make of_count_named_gpios() use new of_count_phandle_with_args() This patch replaces the horribly coded of_count_named_gpios() with a call to of_count_phandle_with_args() which is far more efficient. This also changes the return value of of_gpio_count() & of_gpio_named_count() from 'unsigned int' to 'int' so that it can return an error code. All the users of that function are fixed up to correctly handle a negative return value. v2: Split GPIO portion into a separate patch Tested-by: Andreas Larsson Signed-off-by: Grant Likely Cc: Linus Walleij Cc: Rob Herring --- drivers/gpio/gpiolib-of.c | 35 ----------------------------- drivers/hwmon/gpio-fan.c | 4 ++-- drivers/input/keyboard/matrix_keypad.c | 8 +++---- drivers/net/phy/mdio-mux-gpio.c | 4 ++-- drivers/spi/spi-fsl-spi.c | 4 ++-- drivers/spi/spi-oc-tiny.c | 8 +++---- drivers/spi/spi-ppc4xx.c | 4 ++-- drivers/spi/spi.c | 5 ++--- include/linux/of_gpio.h | 40 +++++++++++++++++++--------------- 9 files changed, 41 insertions(+), 71 deletions(-) (limited to 'drivers/input') diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index d542a141811a..dd8a2129222f 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -88,41 +88,6 @@ int of_get_named_gpio_flags(struct device_node *np, const char *propname, } EXPORT_SYMBOL(of_get_named_gpio_flags); -/** - * of_gpio_named_count - Count GPIOs for a device - * @np: device node to count GPIOs for - * @propname: property name containing gpio specifier(s) - * - * The function returns the count of GPIOs specified for a node. - * - * Note that the empty GPIO specifiers counts too. For example, - * - * gpios = <0 - * &pio1 1 2 - * 0 - * &pio2 3 4>; - * - * defines four GPIOs (so this function will return 4), two of which - * are not specified. - */ -unsigned int of_gpio_named_count(struct device_node *np, const char* propname) -{ - unsigned int cnt = 0; - - do { - int ret; - - ret = of_parse_phandle_with_args(np, propname, "#gpio-cells", - cnt, NULL); - /* A hole in the gpios = <> counts anyway. */ - if (ret < 0 && ret != -EEXIST) - break; - } while (++cnt); - - return cnt; -} -EXPORT_SYMBOL(of_gpio_named_count); - /** * of_gpio_simple_xlate - translate gpio_spec to the GPIO number and flags * @gc: pointer to the gpio_chip structure diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c index 4e04c1228e51..39781945a5d2 100644 --- a/drivers/hwmon/gpio-fan.c +++ b/drivers/hwmon/gpio-fan.c @@ -422,7 +422,7 @@ static int gpio_fan_get_of_pdata(struct device *dev, /* Fill GPIO pin array */ pdata->num_ctrl = of_gpio_count(node); - if (!pdata->num_ctrl) { + if (pdata->num_ctrl <= 0) { dev_err(dev, "gpios DT property empty / missing"); return -ENODEV; } @@ -477,7 +477,7 @@ static int gpio_fan_get_of_pdata(struct device *dev, pdata->speed = speed; /* Alarm GPIO if one exists */ - if (of_gpio_named_count(node, "alarm-gpios")) { + if (of_gpio_named_count(node, "alarm-gpios") > 0) { struct gpio_fan_alarm *alarm; int val; enum of_gpio_flags flags; diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c index f4ff0dda7597..71d77192ac1e 100644 --- a/drivers/input/keyboard/matrix_keypad.c +++ b/drivers/input/keyboard/matrix_keypad.c @@ -403,7 +403,7 @@ matrix_keypad_parse_dt(struct device *dev) struct matrix_keypad_platform_data *pdata; struct device_node *np = dev->of_node; unsigned int *gpios; - int i; + int i, nrow, ncol; if (!np) { dev_err(dev, "device lacks DT data\n"); @@ -416,9 +416,9 @@ matrix_keypad_parse_dt(struct device *dev) return ERR_PTR(-ENOMEM); } - pdata->num_row_gpios = of_gpio_named_count(np, "row-gpios"); - pdata->num_col_gpios = of_gpio_named_count(np, "col-gpios"); - if (!pdata->num_row_gpios || !pdata->num_col_gpios) { + pdata->num_row_gpios = nrow = of_gpio_named_count(np, "row-gpios"); + pdata->num_col_gpios = ncol = of_gpio_named_count(np, "col-gpios"); + if (nrow <= 0 || ncol <= 0) { dev_err(dev, "number of keypad rows/columns not specified\n"); return ERR_PTR(-EINVAL); } diff --git a/drivers/net/phy/mdio-mux-gpio.c b/drivers/net/phy/mdio-mux-gpio.c index 0c9accb1c14f..e91d7d736ae2 100644 --- a/drivers/net/phy/mdio-mux-gpio.c +++ b/drivers/net/phy/mdio-mux-gpio.c @@ -53,7 +53,7 @@ static int mdio_mux_gpio_probe(struct platform_device *pdev) { enum of_gpio_flags f; struct mdio_mux_gpio_state *s; - unsigned int num_gpios; + int num_gpios; unsigned int n; int r; @@ -61,7 +61,7 @@ static int mdio_mux_gpio_probe(struct platform_device *pdev) return -ENODEV; num_gpios = of_gpio_count(pdev->dev.of_node); - if (num_gpios == 0 || num_gpios > MDIO_MUX_GPIO_MAX_BITS) + if (num_gpios <= 0 || num_gpios > MDIO_MUX_GPIO_MAX_BITS) return -ENODEV; s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL); diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c index 1a7f6359d998..086a9eef2e05 100644 --- a/drivers/spi/spi-fsl-spi.c +++ b/drivers/spi/spi-fsl-spi.c @@ -947,12 +947,12 @@ static int of_fsl_spi_get_chipselects(struct device *dev) struct device_node *np = dev->of_node; struct fsl_spi_platform_data *pdata = dev->platform_data; struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(pdata); - unsigned int ngpios; + int ngpios; int i = 0; int ret; ngpios = of_gpio_count(np); - if (!ngpios) { + if (ngpios <= 0) { /* * SPI w/o chip-select line. One SPI device is still permitted * though. diff --git a/drivers/spi/spi-oc-tiny.c b/drivers/spi/spi-oc-tiny.c index 432e66ec3088..cb2e284bd814 100644 --- a/drivers/spi/spi-oc-tiny.c +++ b/drivers/spi/spi-oc-tiny.c @@ -54,7 +54,7 @@ struct tiny_spi { unsigned int txc, rxc; const u8 *txp; u8 *rxp; - unsigned int gpio_cs_count; + int gpio_cs_count; int *gpio_cs; }; @@ -74,7 +74,7 @@ static void tiny_spi_chipselect(struct spi_device *spi, int is_active) { struct tiny_spi *hw = tiny_spi_to_hw(spi); - if (hw->gpio_cs_count) { + if (hw->gpio_cs_count > 0) { gpio_set_value(hw->gpio_cs[spi->chip_select], (spi->mode & SPI_CS_HIGH) ? is_active : !is_active); } @@ -254,7 +254,7 @@ static int tiny_spi_of_probe(struct platform_device *pdev) if (!np) return 0; hw->gpio_cs_count = of_gpio_count(np); - if (hw->gpio_cs_count) { + if (hw->gpio_cs_count > 0) { hw->gpio_cs = devm_kzalloc(&pdev->dev, hw->gpio_cs_count * sizeof(unsigned int), GFP_KERNEL); @@ -352,7 +352,7 @@ static int tiny_spi_probe(struct platform_device *pdev) goto exit_gpio; gpio_direction_output(hw->gpio_cs[i], 1); } - hw->bitbang.master->num_chipselect = max(1U, hw->gpio_cs_count); + hw->bitbang.master->num_chipselect = max(1, hw->gpio_cs_count); /* register our spi controller */ err = spi_bitbang_start(&hw->bitbang); diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c index 7a85f22b6474..af3e6e756dc9 100644 --- a/drivers/spi/spi-ppc4xx.c +++ b/drivers/spi/spi-ppc4xx.c @@ -419,7 +419,7 @@ static int __init spi_ppc4xx_of_probe(struct platform_device *op) * This includes both "null" gpio's and real ones. */ num_gpios = of_gpio_count(np); - if (num_gpios) { + if (num_gpios > 0) { int i; hw->gpios = kzalloc(sizeof(int) * num_gpios, GFP_KERNEL); @@ -471,7 +471,7 @@ static int __init spi_ppc4xx_of_probe(struct platform_device *op) SPI_CPHA | SPI_CPOL | SPI_CS_HIGH | SPI_LSB_FIRST; /* this many pins in all GPIO controllers */ - bbp->master->num_chipselect = num_gpios; + bbp->master->num_chipselect = num_gpios > 0 ? num_gpios : 0; /* Get the clock for the OPB */ opbnp = of_find_compatible_node(NULL, NULL, "ibm,opb"); diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 19ee901577da..21c47482d9fd 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1059,15 +1059,14 @@ EXPORT_SYMBOL_GPL(spi_alloc_master); #ifdef CONFIG_OF static int of_spi_register_master(struct spi_master *master) { - u16 nb; - int i, *cs; + int nb, i, *cs; struct device_node *np = master->dev.of_node; if (!np) return 0; nb = of_gpio_named_count(np, "cs-gpios"); - master->num_chipselect = max(nb, master->num_chipselect); + master->num_chipselect = max(nb, (int)master->num_chipselect); if (nb < 1) return 0; diff --git a/include/linux/of_gpio.h b/include/linux/of_gpio.h index c454f5796747..a83dc6f5008e 100644 --- a/include/linux/of_gpio.h +++ b/include/linux/of_gpio.h @@ -50,9 +50,6 @@ static inline struct of_mm_gpio_chip *to_of_mm_gpio_chip(struct gpio_chip *gc) extern int of_get_named_gpio_flags(struct device_node *np, const char *list_name, int index, enum of_gpio_flags *flags); -extern unsigned int of_gpio_named_count(struct device_node *np, - const char* propname); - extern int of_mm_gpiochip_add(struct device_node *np, struct of_mm_gpio_chip *mm_gc); @@ -71,12 +68,6 @@ static inline int of_get_named_gpio_flags(struct device_node *np, return -ENOSYS; } -static inline unsigned int of_gpio_named_count(struct device_node *np, - const char* propname) -{ - return 0; -} - static inline int of_gpio_simple_xlate(struct gpio_chip *gc, const struct of_phandle_args *gpiospec, u32 *flags) @@ -90,22 +81,37 @@ static inline void of_gpiochip_remove(struct gpio_chip *gc) { } #endif /* CONFIG_OF_GPIO */ /** - * of_gpio_count - Count GPIOs for a device + * of_gpio_named_count() - Count GPIOs for a device * @np: device node to count GPIOs for + * @propname: property name containing gpio specifier(s) * * The function returns the count of GPIOs specified for a node. + * Note that the empty GPIO specifiers count too. Returns either + * Number of gpios defined in property, + * -EINVAL for an incorrectly formed gpios property, or + * -ENOENT for a missing gpios property * - * Note that the empty GPIO specifiers counts too. For example, - * + * Example: * gpios = <0 - * &pio1 1 2 + * &gpio1 1 2 * 0 - * &pio2 3 4>; + * &gpio2 3 4>; + * + * The above example defines four GPIOs, two of which are not specified. + * This function will return '4' + */ +static inline int of_gpio_named_count(struct device_node *np, const char* propname) +{ + return of_count_phandle_with_args(np, propname, "#gpio-cells"); +} + +/** + * of_gpio_count() - Count GPIOs for a device + * @np: device node to count GPIOs for * - * defines four GPIOs (so this function will return 4), two of which - * are not specified. + * Same as of_gpio_named_count, but hard coded to use the 'gpios' property */ -static inline unsigned int of_gpio_count(struct device_node *np) +static inline int of_gpio_count(struct device_node *np) { return of_gpio_named_count(np, "gpios"); } -- cgit v1.2.3 From 678e8cb50647a7580b8122937e8e6e50d949267d Mon Sep 17 00:00:00 2001 From: Qing Xu Date: Mon, 4 Feb 2013 23:40:44 +0800 Subject: mfd: max8925: Fix onkey driver irq base update onkey driver's irq base, it should get from max8925, but not save in a private value Signed-off-by: Qing Xu Acked-by: Dmitry Torokhov Signed-off-by: Samuel Ortiz --- drivers/input/misc/max8925_onkey.c | 3 --- drivers/mfd/max8925-core.c | 2 +- 2 files changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/misc/max8925_onkey.c b/drivers/input/misc/max8925_onkey.c index 369a39de4ff3..f9179b2585a9 100644 --- a/drivers/input/misc/max8925_onkey.c +++ b/drivers/input/misc/max8925_onkey.c @@ -100,9 +100,6 @@ static int max8925_onkey_probe(struct platform_device *pdev) input->dev.parent = &pdev->dev; input_set_capability(input, EV_KEY, KEY_POWER); - irq[0] += chip->irq_base; - irq[1] += chip->irq_base; - error = request_threaded_irq(irq[0], NULL, max8925_onkey_handler, IRQF_ONESHOT, "onkey-down", info); if (error < 0) { diff --git a/drivers/mfd/max8925-core.c b/drivers/mfd/max8925-core.c index d7abbb354acd..f0cc40296d8c 100644 --- a/drivers/mfd/max8925-core.c +++ b/drivers/mfd/max8925-core.c @@ -867,7 +867,7 @@ int max8925_device_init(struct max8925_chip *chip, ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0], ARRAY_SIZE(onkey_devs), - NULL, 0, NULL); + NULL, chip->irq_base, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add onkey subdev\n"); goto out_dev; -- cgit v1.2.3 From fa656308622fdaf54f2ff9ce8a70e4260f701b5d Mon Sep 17 00:00:00 2001 From: Heiko Stübner Date: Sat, 23 Feb 2013 12:06:34 -0800 Subject: Input: auo-pixcir-ts - set input direction for interrupt gpio Previously the gpio was not configured at all. Signed-off-by: Heiko Stuebner Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/auo-pixcir-ts.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/auo-pixcir-ts.c b/drivers/input/touchscreen/auo-pixcir-ts.c index c6e19a96348e..813413eebab7 100644 --- a/drivers/input/touchscreen/auo-pixcir-ts.c +++ b/drivers/input/touchscreen/auo-pixcir-ts.c @@ -504,6 +504,13 @@ static int auo_pixcir_probe(struct i2c_client *client, goto err_gpio_int; } + ret = gpio_direction_input(pdata->gpio_int); + if (ret) { + dev_err(&client->dev, "setting direction of gpio %d failed %d\n", + pdata->gpio_int, ret); + goto err_gpio_dir; + } + if (pdata->init_hw) pdata->init_hw(client); @@ -592,6 +599,7 @@ err_fw_vers: err_input_alloc: if (pdata->exit_hw) pdata->exit_hw(client); +err_gpio_dir: gpio_free(pdata->gpio_int); err_gpio_int: kfree(ts); -- cgit v1.2.3 From 27cef8b47cfb27fa2955a8577637794f1f275db2 Mon Sep 17 00:00:00 2001 From: Heiko Stübner Date: Sat, 23 Feb 2013 12:06:44 -0800 Subject: Input: auo-pixcir-ts - handle reset gpio directly Devicetree based platforms don't handle device callbacks very well and until now no board has come along that needs more extended hwinit than pulling the rst gpio high. Therefore pull the reset handling directly into the driver and remove the callbacks from the driver. If extended device setup is needed at some later point, power-sequences would probably be the solution of choice. Signed-off-by: Heiko Stuebner Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/auo-pixcir-ts.c | 26 ++++++++++++++++++++------ include/linux/input/auo-pixcir-ts.h | 4 +--- 2 files changed, 21 insertions(+), 9 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/auo-pixcir-ts.c b/drivers/input/touchscreen/auo-pixcir-ts.c index 813413eebab7..6317a9c7884c 100644 --- a/drivers/input/touchscreen/auo-pixcir-ts.c +++ b/drivers/input/touchscreen/auo-pixcir-ts.c @@ -511,8 +511,21 @@ static int auo_pixcir_probe(struct i2c_client *client, goto err_gpio_dir; } - if (pdata->init_hw) - pdata->init_hw(client); + ret = gpio_request(pdata->gpio_rst, "auo_pixcir_ts_rst"); + if (ret) { + dev_err(&client->dev, "request of gpio %d failed, %d\n", + pdata->gpio_rst, ret); + goto err_gpio_dir; + } + + ret = gpio_direction_output(pdata->gpio_rst, 1); + if (ret) { + dev_err(&client->dev, "setting direction of gpio %d failed %d\n", + pdata->gpio_rst, ret); + goto err_gpio_rst; + } + + msleep(200); ts->client = client; ts->touch_ind_mode = 0; @@ -597,8 +610,9 @@ err_input_register: err_fw_vers: input_free_device(input_dev); err_input_alloc: - if (pdata->exit_hw) - pdata->exit_hw(client); + gpio_set_value(pdata->gpio_rst, 0); +err_gpio_rst: + gpio_free(pdata->gpio_rst); err_gpio_dir: gpio_free(pdata->gpio_int); err_gpio_int: @@ -616,8 +630,8 @@ static int auo_pixcir_remove(struct i2c_client *client) input_unregister_device(ts->input); - if (pdata->exit_hw) - pdata->exit_hw(client); + gpio_set_value(pdata->gpio_rst, 0); + gpio_free(pdata->gpio_rst); gpio_free(pdata->gpio_int); diff --git a/include/linux/input/auo-pixcir-ts.h b/include/linux/input/auo-pixcir-ts.h index 75d4be717714..5049f21928e4 100644 --- a/include/linux/input/auo-pixcir-ts.h +++ b/include/linux/input/auo-pixcir-ts.h @@ -43,12 +43,10 @@ */ struct auo_pixcir_ts_platdata { int gpio_int; + int gpio_rst; int int_setting; - void (*init_hw)(struct i2c_client *); - void (*exit_hw)(struct i2c_client *); - unsigned int x_max; unsigned int y_max; }; -- cgit v1.2.3 From 38e83f7f9169400047aa3033d643891da1b00441 Mon Sep 17 00:00:00 2001 From: Heiko Stübner Date: Sat, 23 Feb 2013 12:06:48 -0800 Subject: Input: auo_pixcir_ts - keep own pointer to platform_data When supporting devicetree the platformdata may not necessarily come from the dev but may be generated in the driver instead. Therefore keep the pointer in the driver struct instead of using dev.platform_data. Signed-off-by: Heiko Stuebner Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/auo-pixcir-ts.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/auo-pixcir-ts.c b/drivers/input/touchscreen/auo-pixcir-ts.c index 6317a9c7884c..c0a2483b30cb 100644 --- a/drivers/input/touchscreen/auo-pixcir-ts.c +++ b/drivers/input/touchscreen/auo-pixcir-ts.c @@ -111,6 +111,7 @@ struct auo_pixcir_ts { struct i2c_client *client; struct input_dev *input; + const struct auo_pixcir_ts_platdata *pdata; char phys[32]; /* special handling for touch_indicate interupt mode */ @@ -132,7 +133,7 @@ static int auo_pixcir_collect_data(struct auo_pixcir_ts *ts, struct auo_point_t *point) { struct i2c_client *client = ts->client; - const struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data; + const struct auo_pixcir_ts_platdata *pdata = ts->pdata; uint8_t raw_coord[8]; uint8_t raw_area[4]; int i, ret; @@ -178,8 +179,7 @@ static int auo_pixcir_collect_data(struct auo_pixcir_ts *ts, static irqreturn_t auo_pixcir_interrupt(int irq, void *dev_id) { struct auo_pixcir_ts *ts = dev_id; - struct i2c_client *client = ts->client; - const struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data; + const struct auo_pixcir_ts_platdata *pdata = ts->pdata; struct auo_point_t point[AUO_PIXCIR_REPORT_POINTS]; int i; int ret; @@ -290,7 +290,7 @@ static int auo_pixcir_int_config(struct auo_pixcir_ts *ts, int int_setting) { struct i2c_client *client = ts->client; - struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data; + const struct auo_pixcir_ts_platdata *pdata = ts->pdata; int ret; ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_INT_SETTING); @@ -527,6 +527,7 @@ static int auo_pixcir_probe(struct i2c_client *client, msleep(200); + ts->pdata = pdata; ts->client = client; ts->touch_ind_mode = 0; init_waitqueue_head(&ts->wait); @@ -624,7 +625,7 @@ err_gpio_int: static int auo_pixcir_remove(struct i2c_client *client) { struct auo_pixcir_ts *ts = i2c_get_clientdata(client); - const struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data; + const struct auo_pixcir_ts_platdata *pdata = ts->pdata; free_irq(client->irq, ts); -- cgit v1.2.3 From 7241443f67bb352183bcfd7e3b807b87f2777b5d Mon Sep 17 00:00:00 2001 From: Heiko Stübner Date: Sat, 23 Feb 2013 12:08:55 -0800 Subject: Input: auo_pixcir_ts - add devicetree support Add the necessary code to create the needed platformdata from devicetree informations. The interrupt mode of the chip is not set via devicetree, as it is not a property of the hardware but instead only a preferred type of operation. This should probably be made settable via configfs in the future. The option set as default is the mode the datasheet mentions as default. Signed-off-by: Heiko Stuebner Signed-off-by: Dmitry Torokhov --- .../bindings/input/touchscreen/auo_pixcir_ts.txt | 30 +++++++++ drivers/input/touchscreen/auo-pixcir-ts.c | 74 ++++++++++++++++++++-- 2 files changed, 99 insertions(+), 5 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt (limited to 'drivers/input') diff --git a/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt new file mode 100644 index 000000000000..f40f21c642b9 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt @@ -0,0 +1,30 @@ +* AUO in-cell touchscreen controller using Pixcir sensors + +Required properties: +- compatible: must be "auo,auo_pixcir_ts" +- reg: I2C address of the chip +- interrupts: interrupt to which the chip is connected +- gpios: gpios the chip is connected to + first one is the interrupt gpio and second one the reset gpio +- x-size: horizontal resolution of touchscreen +- y-size: vertical resolution of touchscreen + +Example: + + i2c@00000000 { + /* ... */ + + auo_pixcir_ts@5c { + compatible = "auo,auo_pixcir_ts"; + reg = <0x5c>; + interrupts = <2 0>; + + gpios = <&gpf 2 0 2>, /* INT */ + <&gpf 5 1 0>; /* RST */ + + x-size = <800>; + y-size = <600>; + }; + + /* ... */ + }; diff --git a/drivers/input/touchscreen/auo-pixcir-ts.c b/drivers/input/touchscreen/auo-pixcir-ts.c index c0a2483b30cb..dfa6d5463ef7 100644 --- a/drivers/input/touchscreen/auo-pixcir-ts.c +++ b/drivers/input/touchscreen/auo-pixcir-ts.c @@ -31,6 +31,8 @@ #include #include #include +#include +#include /* * Coordinate calculation: @@ -479,19 +481,72 @@ unlock: } #endif -static SIMPLE_DEV_PM_OPS(auo_pixcir_pm_ops, auo_pixcir_suspend, - auo_pixcir_resume); +static SIMPLE_DEV_PM_OPS(auo_pixcir_pm_ops, + auo_pixcir_suspend, auo_pixcir_resume); + +#ifdef CONFIG_OF +static struct auo_pixcir_ts_platdata *auo_pixcir_parse_dt(struct device *dev) +{ + struct auo_pixcir_ts_platdata *pdata; + struct device_node *np = dev->of_node; + + if (!np) + return ERR_PTR(-ENOENT); + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(dev, "failed to allocate platform data\n"); + return ERR_PTR(-ENOMEM); + } + + pdata->gpio_int = of_get_gpio(np, 0); + if (!gpio_is_valid(pdata->gpio_int)) { + dev_err(dev, "failed to get interrupt gpio\n"); + return ERR_PTR(-EINVAL); + } + + pdata->gpio_rst = of_get_gpio(np, 1); + if (!gpio_is_valid(pdata->gpio_rst)) { + dev_err(dev, "failed to get reset gpio\n"); + return ERR_PTR(-EINVAL); + } + + if (of_property_read_u32(np, "x-size", &pdata->x_max)) { + dev_err(dev, "failed to get x-size property\n"); + return ERR_PTR(-EINVAL); + } + + if (of_property_read_u32(np, "y-size", &pdata->y_max)) { + dev_err(dev, "failed to get y-size property\n"); + return ERR_PTR(-EINVAL); + } + + /* default to asserting the interrupt when the screen is touched */ + pdata->int_setting = AUO_PIXCIR_INT_TOUCH_IND; + + return pdata; +} +#else +static struct auo_pixcir_ts_platdata *auo_pixcir_parse_dt(struct device *dev) +{ + return ERR_PTR(-EINVAL); +} +#endif static int auo_pixcir_probe(struct i2c_client *client, const struct i2c_device_id *id) { - const struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data; + const struct auo_pixcir_ts_platdata *pdata; struct auo_pixcir_ts *ts; struct input_dev *input_dev; int ret; - if (!pdata) - return -EINVAL; + pdata = dev_get_platdata(&client->dev); + if (!pdata) { + pdata = auo_pixcir_parse_dt(&client->dev); + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + } ts = kzalloc(sizeof(struct auo_pixcir_ts), GFP_KERNEL); if (!ts) @@ -647,11 +702,20 @@ static const struct i2c_device_id auo_pixcir_idtable[] = { }; MODULE_DEVICE_TABLE(i2c, auo_pixcir_idtable); +#ifdef CONFIG_OF +static struct of_device_id auo_pixcir_ts_dt_idtable[] = { + { .compatible = "auo,auo_pixcir_ts" }, + {}, +}; +MODULE_DEVICE_TABLE(of, auo_pixcir_ts_dt_idtable); +#endif + static struct i2c_driver auo_pixcir_driver = { .driver = { .owner = THIS_MODULE, .name = "auo_pixcir_ts", .pm = &auo_pixcir_pm_ops, + .of_match_table = of_match_ptr(auo_pixcir_ts_dt_idtable), }, .probe = auo_pixcir_probe, .remove = auo_pixcir_remove, -- cgit v1.2.3 From bfc29e95950345dca0d64a79da46f6b8592c0b1e Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sat, 23 Feb 2013 12:18:14 -0800 Subject: Input: auo-pixcir-ts - switch to using managed resources This simplifies error unwinding and device teardown. Tested-by: Heiko Stuebner Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/auo-pixcir-ts.c | 163 +++++++++++++----------------- 1 file changed, 69 insertions(+), 94 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/auo-pixcir-ts.c b/drivers/input/touchscreen/auo-pixcir-ts.c index dfa6d5463ef7..d3f9f6b0f9b7 100644 --- a/drivers/input/touchscreen/auo-pixcir-ts.c +++ b/drivers/input/touchscreen/auo-pixcir-ts.c @@ -533,13 +533,21 @@ static struct auo_pixcir_ts_platdata *auo_pixcir_parse_dt(struct device *dev) } #endif +static void auo_pixcir_reset(void *data) +{ + struct auo_pixcir_ts *ts = data; + + gpio_set_value(ts->pdata->gpio_rst, 0); +} + static int auo_pixcir_probe(struct i2c_client *client, - const struct i2c_device_id *id) + const struct i2c_device_id *id) { const struct auo_pixcir_ts_platdata *pdata; struct auo_pixcir_ts *ts; struct input_dev *input_dev; - int ret; + int version; + int error; pdata = dev_get_platdata(&client->dev); if (!pdata) { @@ -548,60 +556,30 @@ static int auo_pixcir_probe(struct i2c_client *client, return PTR_ERR(pdata); } - ts = kzalloc(sizeof(struct auo_pixcir_ts), GFP_KERNEL); + ts = devm_kzalloc(&client->dev, + sizeof(struct auo_pixcir_ts), GFP_KERNEL); if (!ts) return -ENOMEM; - ret = gpio_request(pdata->gpio_int, "auo_pixcir_ts_int"); - if (ret) { - dev_err(&client->dev, "request of gpio %d failed, %d\n", - pdata->gpio_int, ret); - goto err_gpio_int; - } - - ret = gpio_direction_input(pdata->gpio_int); - if (ret) { - dev_err(&client->dev, "setting direction of gpio %d failed %d\n", - pdata->gpio_int, ret); - goto err_gpio_dir; - } - - ret = gpio_request(pdata->gpio_rst, "auo_pixcir_ts_rst"); - if (ret) { - dev_err(&client->dev, "request of gpio %d failed, %d\n", - pdata->gpio_rst, ret); - goto err_gpio_dir; - } - - ret = gpio_direction_output(pdata->gpio_rst, 1); - if (ret) { - dev_err(&client->dev, "setting direction of gpio %d failed %d\n", - pdata->gpio_rst, ret); - goto err_gpio_rst; + input_dev = devm_input_allocate_device(&client->dev); + if (!input_dev) { + dev_err(&client->dev, "could not allocate input device\n"); + return -ENOMEM; } - msleep(200); - ts->pdata = pdata; ts->client = client; + ts->input = input_dev; ts->touch_ind_mode = 0; + ts->stopped = true; init_waitqueue_head(&ts->wait); snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&client->dev)); - input_dev = input_allocate_device(); - if (!input_dev) { - dev_err(&client->dev, "could not allocate input device\n"); - goto err_input_alloc; - } - - ts->input = input_dev; - input_dev->name = "AUO-Pixcir touchscreen"; input_dev->phys = ts->phys; input_dev->id.bustype = BUS_I2C; - input_dev->dev.parent = &client->dev; input_dev->open = auo_pixcir_input_open; input_dev->close = auo_pixcir_input_close; @@ -626,72 +604,70 @@ static int auo_pixcir_probe(struct i2c_client *client, AUO_PIXCIR_MAX_AREA, 0, 0); input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0); - ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_VERSION); - if (ret < 0) - goto err_fw_vers; - dev_info(&client->dev, "firmware version 0x%X\n", ret); - - ret = auo_pixcir_int_config(ts, pdata->int_setting); - if (ret) - goto err_fw_vers; - input_set_drvdata(ts->input, ts); - ts->stopped = true; - ret = request_threaded_irq(client->irq, NULL, auo_pixcir_interrupt, - IRQF_TRIGGER_RISING | IRQF_ONESHOT, - input_dev->name, ts); - if (ret) { - dev_err(&client->dev, "irq %d requested failed\n", client->irq); - goto err_fw_vers; + error = devm_gpio_request_one(&client->dev, pdata->gpio_int, + GPIOF_DIR_IN, "auo_pixcir_ts_int"); + if (error) { + dev_err(&client->dev, "request of gpio %d failed, %d\n", + pdata->gpio_int, error); + return error; } - /* stop device and put it into deep sleep until it is opened */ - ret = auo_pixcir_stop(ts); - if (ret < 0) - goto err_input_register; - - ret = input_register_device(input_dev); - if (ret) { - dev_err(&client->dev, "could not register input device\n"); - goto err_input_register; + error = devm_gpio_request_one(&client->dev, pdata->gpio_rst, + GPIOF_DIR_OUT | GPIOF_INIT_HIGH, + "auo_pixcir_ts_rst"); + if (error) { + dev_err(&client->dev, "request of gpio %d failed, %d\n", + pdata->gpio_rst, error); + return error; } - i2c_set_clientdata(client, ts); - - return 0; - -err_input_register: - free_irq(client->irq, ts); -err_fw_vers: - input_free_device(input_dev); -err_input_alloc: - gpio_set_value(pdata->gpio_rst, 0); -err_gpio_rst: - gpio_free(pdata->gpio_rst); -err_gpio_dir: - gpio_free(pdata->gpio_int); -err_gpio_int: - kfree(ts); + error = devm_add_action(&client->dev, auo_pixcir_reset, ts); + if (error) { + auo_pixcir_reset(ts); + dev_err(&client->dev, "failed to register reset action, %d\n", + error); + return error; + } - return ret; -} + msleep(200); -static int auo_pixcir_remove(struct i2c_client *client) -{ - struct auo_pixcir_ts *ts = i2c_get_clientdata(client); - const struct auo_pixcir_ts_platdata *pdata = ts->pdata; + version = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_VERSION); + if (version < 0) { + error = version; + return error; + } - free_irq(client->irq, ts); + dev_info(&client->dev, "firmware version 0x%X\n", version); - input_unregister_device(ts->input); + error = auo_pixcir_int_config(ts, pdata->int_setting); + if (error) + return error; - gpio_set_value(pdata->gpio_rst, 0); - gpio_free(pdata->gpio_rst); + error = devm_request_threaded_irq(&client->dev, client->irq, + NULL, auo_pixcir_interrupt, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + input_dev->name, ts); + if (error) { + dev_err(&client->dev, "irq %d requested failed, %d\n", + client->irq, error); + return error; + } - gpio_free(pdata->gpio_int); + /* stop device and put it into deep sleep until it is opened */ + error = auo_pixcir_stop(ts); + if (error) + return error; + + error = input_register_device(input_dev); + if (error) { + dev_err(&client->dev, "could not register input device, %d\n", + error); + return error; + } - kfree(ts); + i2c_set_clientdata(client, ts); return 0; } @@ -718,7 +694,6 @@ static struct i2c_driver auo_pixcir_driver = { .of_match_table = of_match_ptr(auo_pixcir_ts_dt_idtable), }, .probe = auo_pixcir_probe, - .remove = auo_pixcir_remove, .id_table = auo_pixcir_idtable, }; -- cgit v1.2.3 From 832a998190400563a69677b30d5f306e45cc3aff Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 25 Feb 2013 07:40:34 +0100 Subject: input: disable i8042 PC Keyboard controller for s390 Just add s390 to the list of architectures that don't want this driver. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/input/serio/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/input') diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index 6e9cc765e0dc..3ec5ef2dd443 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -22,7 +22,7 @@ config SERIO_I8042 tristate "i8042 PC Keyboard controller" if EXPERT || !X86 default y depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && \ - (!SUPERH || SH_CAYMAN) && !M68K && !BLACKFIN + (!SUPERH || SH_CAYMAN) && !M68K && !BLACKFIN && !S390 help i8042 is the chip over which the standard AT keyboard and PS/2 mouse are connected to the computer. If you use these devices, -- cgit v1.2.3 From 15fb9683c3e4eb1f8c6c982079a806b3894c2ba0 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Wed, 27 Feb 2013 22:46:56 +0100 Subject: parisc: check return value of down_interruptible() in hp_sdc_rtc.c additionally comment out unused code (which may be used later) Signed-off-by: Helge Deller --- drivers/input/misc/hp_sdc_rtc.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/misc/hp_sdc_rtc.c b/drivers/input/misc/hp_sdc_rtc.c index 0b4f54265f62..2e3334b8f82d 100644 --- a/drivers/input/misc/hp_sdc_rtc.c +++ b/drivers/input/misc/hp_sdc_rtc.c @@ -109,7 +109,9 @@ static int hp_sdc_rtc_do_read_bbrtc (struct rtc_time *rtctm) if (hp_sdc_enqueue_transaction(&t)) return -1; - down_interruptible(&tsem); /* Put ourselves to sleep for results. */ + /* Put ourselves to sleep for results. */ + if (WARN_ON(down_interruptible(&tsem))) + return -1; /* Check for nonpresence of BBRTC */ if (!((tseq[83] | tseq[90] | tseq[69] | tseq[76] | @@ -176,11 +178,16 @@ static int64_t hp_sdc_rtc_read_i8042timer (uint8_t loadcmd, int numreg) t.seq = tseq; t.act.semaphore = &i8042tregs; - down_interruptible(&i8042tregs); /* Sleep if output regs in use. */ + /* Sleep if output regs in use. */ + if (WARN_ON(down_interruptible(&i8042tregs))) + return -1; if (hp_sdc_enqueue_transaction(&t)) return -1; - down_interruptible(&i8042tregs); /* Sleep until results come back. */ + /* Sleep until results come back. */ + if (WARN_ON(down_interruptible(&i8042tregs))) + return -1; + up(&i8042tregs); return (tseq[5] | @@ -276,6 +283,7 @@ static inline int hp_sdc_rtc_read_ct(struct timeval *res) { } +#if 0 /* not used yet */ /* Set the i8042 real-time clock */ static int hp_sdc_rtc_set_rt (struct timeval *setto) { @@ -386,6 +394,7 @@ static int hp_sdc_rtc_set_i8042timer (struct timeval *setto, uint8_t setcmd) } return 0; } +#endif static ssize_t hp_sdc_rtc_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { -- cgit v1.2.3 From 22dfab7fd7fd5a8a2c5556ca0a8fd35fc959abc8 Mon Sep 17 00:00:00 2001 From: Daniel Kurtz Date: Thu, 7 Mar 2013 19:43:33 -0800 Subject: Input: atmel_mxt_ts - Support for touchpad variant This same driver can be used by atmel based touchscreens and touchpads (buttonpads). Platform data may specify a device is a touchpad using the is_tp flag. This will cause the driver to perform some touchpad specific initializations, such as: * register input device name "Atmel maXTouch Touchpad" instead of Touchscreen. * register BTN_LEFT & BTN_TOOL_* event types. * register axis resolution (as a fixed constant, for now) * register BUTTONPAD property * process GPIO buttons using reportid T19 Input event GPIO mapping is done by the platform data key_map array. key_map[x] should contain the KEY or BTN code to send when processing GPIOx from T19. To specify a GPIO as not an input source, populate with KEY_RESERVED, or 0. Signed-off-by: Daniel Kurtz Signed-off-by: Benson Leung Signed-off-by: Nick Dyer Tested-by: Olof Johansson Signed-off-by: Linus Torvalds --- drivers/input/touchscreen/atmel_mxt_ts.c | 64 +++++++++++++++++++++++++++++++- include/linux/i2c/atmel_mxt_ts.h | 5 +++ 2 files changed, 67 insertions(+), 2 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index d04f810cb1dd..8ed279c56d27 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -181,6 +181,12 @@ #define MXT_FWRESET_TIME 175 /* msec */ +/* MXT_SPT_GPIOPWM_T19 field */ +#define MXT_GPIO0_MASK 0x04 +#define MXT_GPIO1_MASK 0x08 +#define MXT_GPIO2_MASK 0x10 +#define MXT_GPIO3_MASK 0x20 + /* Command to unlock bootloader */ #define MXT_UNLOCK_CMD_MSB 0xaa #define MXT_UNLOCK_CMD_LSB 0xdc @@ -212,6 +218,8 @@ /* Touchscreen absolute values */ #define MXT_MAX_AREA 0xff +#define MXT_PIXELS_PER_MM 20 + struct mxt_info { u8 family_id; u8 variant_id; @@ -243,6 +251,8 @@ struct mxt_data { const struct mxt_platform_data *pdata; struct mxt_object *object_table; struct mxt_info info; + bool is_tp; + unsigned int irq; unsigned int max_x; unsigned int max_y; @@ -251,6 +261,7 @@ struct mxt_data { u8 T6_reportid; u8 T9_reportid_min; u8 T9_reportid_max; + u8 T19_reportid; }; static bool mxt_object_readable(unsigned int type) @@ -502,6 +513,21 @@ static int mxt_write_object(struct mxt_data *data, return mxt_write_reg(data->client, reg + offset, val); } +static void mxt_input_button(struct mxt_data *data, struct mxt_message *message) +{ + struct input_dev *input = data->input_dev; + bool button; + int i; + + /* Active-low switch */ + for (i = 0; i < MXT_NUM_GPIO; i++) { + if (data->pdata->key_map[i] == KEY_RESERVED) + continue; + button = !(message->message[0] & MXT_GPIO0_MASK << i); + input_report_key(input, data->pdata->key_map[i], button); + } +} + static void mxt_input_touchevent(struct mxt_data *data, struct mxt_message *message, int id) { @@ -585,6 +611,9 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id) int id = reportid - data->T9_reportid_min; mxt_input_touchevent(data, &message, id); update_input = true; + } else if (message.reportid == data->T19_reportid) { + mxt_input_button(data, &message); + update_input = true; } else { mxt_dump_message(dev, &message); } @@ -764,6 +793,9 @@ static int mxt_get_object_table(struct mxt_data *data) data->T9_reportid_min = min_id; data->T9_reportid_max = max_id; break; + case MXT_SPT_GPIOPWM_T19: + data->T19_reportid = min_id; + break; } } @@ -777,7 +809,7 @@ static void mxt_free_object_table(struct mxt_data *data) data->T6_reportid = 0; data->T9_reportid_min = 0; data->T9_reportid_max = 0; - + data->T19_reportid = 0; } static int mxt_initialize(struct mxt_data *data) @@ -1115,9 +1147,13 @@ static int mxt_probe(struct i2c_client *client, goto err_free_mem; } - input_dev->name = "Atmel maXTouch Touchscreen"; + data->is_tp = pdata && pdata->is_tp; + + input_dev->name = (data->is_tp) ? "Atmel maXTouch Touchpad" : + "Atmel maXTouch Touchscreen"; snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0", client->adapter->nr, client->addr); + input_dev->phys = data->phys; input_dev->id.bustype = BUS_I2C; @@ -1140,6 +1176,29 @@ static int mxt_probe(struct i2c_client *client, __set_bit(EV_KEY, input_dev->evbit); __set_bit(BTN_TOUCH, input_dev->keybit); + if (data->is_tp) { + int i; + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); + __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit); + + for (i = 0; i < MXT_NUM_GPIO; i++) + if (pdata->key_map[i] != KEY_RESERVED) + __set_bit(pdata->key_map[i], input_dev->keybit); + + __set_bit(BTN_TOOL_FINGER, input_dev->keybit); + __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); + __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit); + __set_bit(BTN_TOOL_QUADTAP, input_dev->keybit); + __set_bit(BTN_TOOL_QUINTTAP, input_dev->keybit); + + input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM); + input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM); + input_abs_set_res(input_dev, ABS_MT_POSITION_X, + MXT_PIXELS_PER_MM); + input_abs_set_res(input_dev, ABS_MT_POSITION_Y, + MXT_PIXELS_PER_MM); + } + /* For single touch */ input_set_abs_params(input_dev, ABS_X, 0, data->max_x, 0, 0); @@ -1258,6 +1317,7 @@ static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume); static const struct i2c_device_id mxt_id[] = { { "qt602240_ts", 0 }, { "atmel_mxt_ts", 0 }, + { "atmel_mxt_tp", 0 }, { "mXT224", 0 }, { } }; diff --git a/include/linux/i2c/atmel_mxt_ts.h b/include/linux/i2c/atmel_mxt_ts.h index f027f7a63511..99e379b74398 100644 --- a/include/linux/i2c/atmel_mxt_ts.h +++ b/include/linux/i2c/atmel_mxt_ts.h @@ -15,6 +15,9 @@ #include +/* For key_map array */ +#define MXT_NUM_GPIO 4 + /* Orient */ #define MXT_NORMAL 0x0 #define MXT_DIAGONAL 0x1 @@ -39,6 +42,8 @@ struct mxt_platform_data { unsigned int voltage; unsigned char orient; unsigned long irqflags; + bool is_tp; + const unsigned int key_map[MXT_NUM_GPIO]; }; #endif /* __LINUX_ATMEL_MXT_TS_H */ -- cgit v1.2.3 From 8343bce195da8bb4d5a652ee085474a5cc62983f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 9 Mar 2013 10:31:01 -0800 Subject: Atmel MXT touchscreen: increase reset timeouts There is a more complete atmel patch-series out by Nick Dyer that fixes this and other things, but in the meantime this is the minimal thing to get the touchscreen going on (at least my) Pixel Chromebook. Not that I want my dirty fingers near that beautiful screen, but it seems that a non-initialized touchscreen will also end up being a constant wakeup source, so you have to disable it to go to sleep. And it's easier to just fix the initialization sequence. Signed-off-by: Linus Torvalds --- drivers/input/touchscreen/atmel_mxt_ts.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 8ed279c56d27..59aa24002c7b 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -176,8 +176,8 @@ /* Define for MXT_GEN_COMMAND_T6 */ #define MXT_BOOT_VALUE 0xa5 #define MXT_BACKUP_VALUE 0x55 -#define MXT_BACKUP_TIME 25 /* msec */ -#define MXT_RESET_TIME 65 /* msec */ +#define MXT_BACKUP_TIME 50 /* msec */ +#define MXT_RESET_TIME 200 /* msec */ #define MXT_FWRESET_TIME 175 /* msec */ -- cgit v1.2.3 From b4a034dab147776eab8eb8b2997ea16ef0e32c17 Mon Sep 17 00:00:00 2001 From: Daniel Hellstrom Date: Mon, 25 Feb 2013 22:51:37 -0800 Subject: Input: add support for GRLIB APBPS2 PS/2 Keyboard/Mouse APBPS2 is a PS/2 core part of GRLIB found in SPARC32/LEON products. Signed-off-by: Daniel Hellstrom Signed-off-by: Dmitry Torokhov --- .../bindings/input/ps2keyb-mouse-apbps2.txt | 16 ++ drivers/input/serio/Kconfig | 10 + drivers/input/serio/Makefile | 1 + drivers/input/serio/apbps2.c | 230 +++++++++++++++++++++ 4 files changed, 257 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/ps2keyb-mouse-apbps2.txt create mode 100644 drivers/input/serio/apbps2.c (limited to 'drivers/input') diff --git a/Documentation/devicetree/bindings/input/ps2keyb-mouse-apbps2.txt b/Documentation/devicetree/bindings/input/ps2keyb-mouse-apbps2.txt new file mode 100644 index 000000000000..3029c5694cf6 --- /dev/null +++ b/Documentation/devicetree/bindings/input/ps2keyb-mouse-apbps2.txt @@ -0,0 +1,16 @@ +Aeroflex Gaisler APBPS2 PS/2 Core, supporting Keyboard or Mouse. + +The APBPS2 PS/2 core is available in the GRLIB VHDL IP core library. + +Note: In the ordinary environment for the APBPS2 core, a LEON SPARC system, +these properties are built from information in the AMBA plug&play and from +bootloader settings. + +Required properties: + +- name : Should be "GAISLER_APBPS2" or "01_060" +- reg : Address and length of the register set for the device +- interrupts : Interrupt numbers for this device + +For further information look in the documentation for the GLIB IP core library: +http://www.gaisler.com/products/grlib/grip.pdf diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index 560c243bfcaf..dbb170916dd1 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -244,4 +244,14 @@ config SERIO_ARC_PS2 To compile this driver as a module, choose M here; the module will be called arc_ps2. +config SERIO_APBPS2 + tristate "GRLIB APBPS2 PS/2 keyboard/mouse controller" + depends on OF + help + Say Y here if you want support for GRLIB APBPS2 peripherals used + to connect to PS/2 keyboard and/or mouse. + + To compile this driver as a module, choose M here: the module will + be called apbps2. + endif diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile index 4b0c8f84f1c1..8edb36c2cdb4 100644 --- a/drivers/input/serio/Makefile +++ b/drivers/input/serio/Makefile @@ -26,3 +26,4 @@ obj-$(CONFIG_SERIO_AMS_DELTA) += ams_delta_serio.o obj-$(CONFIG_SERIO_XILINX_XPS_PS2) += xilinx_ps2.o obj-$(CONFIG_SERIO_ALTERA_PS2) += altera_ps2.o obj-$(CONFIG_SERIO_ARC_PS2) += arc_ps2.o +obj-$(CONFIG_SERIO_APBPS2) += apbps2.o diff --git a/drivers/input/serio/apbps2.c b/drivers/input/serio/apbps2.c new file mode 100644 index 000000000000..2c14e6fa64c2 --- /dev/null +++ b/drivers/input/serio/apbps2.c @@ -0,0 +1,230 @@ +/* + * Copyright (C) 2013 Aeroflex Gaisler + * + * This driver supports the APBPS2 PS/2 core available in the GRLIB + * VHDL IP core library. + * + * Full documentation of the APBPS2 core can be found here: + * http://www.gaisler.com/products/grlib/grip.pdf + * + * See "Documentation/devicetree/bindings/input/ps2keyb-mouse-apbps2.txt" for + * information on open firmware properties. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Contributors: Daniel Hellstrom + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct apbps2_regs { + u32 __iomem data; /* 0x00 */ + u32 __iomem status; /* 0x04 */ + u32 __iomem ctrl; /* 0x08 */ + u32 __iomem reload; /* 0x0c */ +}; + +#define APBPS2_STATUS_DR (1<<0) +#define APBPS2_STATUS_PE (1<<1) +#define APBPS2_STATUS_FE (1<<2) +#define APBPS2_STATUS_KI (1<<3) +#define APBPS2_STATUS_RF (1<<4) +#define APBPS2_STATUS_TF (1<<5) +#define APBPS2_STATUS_TCNT (0x1f<<22) +#define APBPS2_STATUS_RCNT (0x1f<<27) + +#define APBPS2_CTRL_RE (1<<0) +#define APBPS2_CTRL_TE (1<<1) +#define APBPS2_CTRL_RI (1<<2) +#define APBPS2_CTRL_TI (1<<3) + +struct apbps2_priv { + struct serio *io; + struct apbps2_regs *regs; +}; + +static int apbps2_idx; + +static irqreturn_t apbps2_isr(int irq, void *dev_id) +{ + struct apbps2_priv *priv = dev_id; + unsigned long status, data, rxflags; + irqreturn_t ret = IRQ_NONE; + + while ((status = ioread32be(&priv->regs->status)) & APBPS2_STATUS_DR) { + data = ioread32be(&priv->regs->data); + rxflags = (status & APBPS2_STATUS_PE) ? SERIO_PARITY : 0; + rxflags |= (status & APBPS2_STATUS_FE) ? SERIO_FRAME : 0; + + /* clear error bits? */ + if (rxflags) + iowrite32be(0, &priv->regs->status); + + serio_interrupt(priv->io, data, rxflags); + + ret = IRQ_HANDLED; + } + + return ret; +} + +static int apbps2_write(struct serio *io, unsigned char val) +{ + struct apbps2_priv *priv = io->port_data; + unsigned int tleft = 10000; /* timeout in 100ms */ + + /* delay until PS/2 controller has room for more chars */ + while ((ioread32be(&priv->regs->status) & APBPS2_STATUS_TF) && tleft--) + udelay(10); + + if ((ioread32be(&priv->regs->status) & APBPS2_STATUS_TF) == 0) { + iowrite32be(val, &priv->regs->data); + + iowrite32be(APBPS2_CTRL_RE | APBPS2_CTRL_RI | APBPS2_CTRL_TE, + &priv->regs->ctrl); + return 0; + } + + return -ETIMEDOUT; +} + +static int apbps2_open(struct serio *io) +{ + struct apbps2_priv *priv = io->port_data; + int limit; + unsigned long tmp; + + /* clear error flags */ + iowrite32be(0, &priv->regs->status); + + /* Clear old data if available (unlikely) */ + limit = 1024; + while ((ioread32be(&priv->regs->status) & APBPS2_STATUS_DR) && --limit) + tmp = ioread32be(&priv->regs->data); + + /* Enable reciever and it's interrupt */ + iowrite32be(APBPS2_CTRL_RE | APBPS2_CTRL_RI, &priv->regs->ctrl); + + return 0; +} + +static void apbps2_close(struct serio *io) +{ + struct apbps2_priv *priv = io->port_data; + + /* stop interrupts at PS/2 HW level */ + iowrite32be(0, &priv->regs->ctrl); +} + +/* Initialize one APBPS2 PS/2 core */ +static int apbps2_of_probe(struct platform_device *ofdev) +{ + struct apbps2_priv *priv; + int irq, err; + u32 freq_hz; + struct resource *res; + + priv = devm_kzalloc(&ofdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(&ofdev->dev, "memory allocation failed\n"); + return -ENOMEM; + } + + /* Find Device Address */ + res = platform_get_resource(ofdev, IORESOURCE_MEM, 0); + priv->regs = devm_request_and_ioremap(&ofdev->dev, res); + if (!priv->regs) { + dev_err(&ofdev->dev, "io-regs mapping failed\n"); + return -EBUSY; + } + + /* Reset hardware, disable interrupt */ + iowrite32be(0, &priv->regs->ctrl); + + /* IRQ */ + irq = irq_of_parse_and_map(ofdev->dev.of_node, 0); + err = devm_request_irq(&ofdev->dev, irq, apbps2_isr, + IRQF_SHARED, "apbps2", priv); + if (err) { + dev_err(&ofdev->dev, "request IRQ%d failed\n", irq); + return err; + } + + /* Get core frequency */ + if (of_property_read_u32(ofdev->dev.of_node, "freq", &freq_hz)) { + dev_err(&ofdev->dev, "unable to get core frequency\n"); + return -EINVAL; + } + + /* Set reload register to core freq in kHz/10 */ + iowrite32be(freq_hz / 10000, &priv->regs->reload); + + priv->io = kzalloc(sizeof(struct serio), GFP_KERNEL); + if (!priv->io) + return -ENOMEM; + + priv->io->id.type = SERIO_8042; + priv->io->open = apbps2_open; + priv->io->close = apbps2_close; + priv->io->write = apbps2_write; + priv->io->port_data = priv; + strlcpy(priv->io->name, "APBPS2 PS/2", sizeof(priv->io->name)); + snprintf(priv->io->phys, sizeof(priv->io->phys), + "apbps2_%d", apbps2_idx++); + + dev_info(&ofdev->dev, "irq = %d, base = 0x%p\n", irq, priv->regs); + + serio_register_port(priv->io); + + platform_set_drvdata(ofdev, priv); + + return 0; +} + +static int apbps2_of_remove(struct platform_device *of_dev) +{ + struct apbps2_priv *priv = platform_get_drvdata(of_dev); + + serio_unregister_port(priv->io); + + return 0; +} + +static struct of_device_id apbps2_of_match[] = { + { .name = "GAISLER_APBPS2", }, + { .name = "01_060", }, + {} +}; + +MODULE_DEVICE_TABLE(of, apbps2_of_match); + +static struct platform_driver apbps2_of_driver = { + .driver = { + .name = "grlib-apbps2", + .owner = THIS_MODULE, + .of_match_table = apbps2_of_match, + }, + .probe = apbps2_of_probe, + .remove = apbps2_of_remove, +}; + +module_platform_driver(apbps2_of_driver); + +MODULE_AUTHOR("Aeroflex Gaisler AB."); +MODULE_DESCRIPTION("GRLIB APBPS2 PS/2 serial I/O"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From cfd5d09691ee188a36c00f5c3b220fbf082a78d7 Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Sat, 9 Mar 2013 15:19:56 -0800 Subject: Input: wm97xx - drop out of range inputs With fast movements, there occured some out of screen jumps with my touchscreen. The abs_x and abs_y module parameters should fix this by default, but the driver doesn't actively checks the x/y coordinates. Instead it seems that the input layer was supposed to drop out of range inputs, as described in the comments: "These parameters are used to help the input layer discard out of range readings and reduce jitter etc" The input layer documentation describes that values that are not in the absolute range are also accepted. So this patch adds a check within the driver. Signed-off-by: Markus Pargmann Acked-by: Mark Brown Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/wm97xx-core.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index 5dbe73af2f8f..7e45c9f6e6b7 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -442,6 +442,16 @@ static int wm97xx_read_samples(struct wm97xx *wm) "pen down: x=%x:%d, y=%x:%d, pressure=%x:%d\n", data.x >> 12, data.x & 0xfff, data.y >> 12, data.y & 0xfff, data.p >> 12, data.p & 0xfff); + + if (abs_x[0] > (data.x & 0xfff) || + abs_x[1] < (data.x & 0xfff) || + abs_y[0] > (data.y & 0xfff) || + abs_y[1] < (data.y & 0xfff)) { + dev_dbg(wm->dev, "Measurement out of range, dropping it\n"); + rc = RC_AGAIN; + goto out; + } + input_report_abs(wm->input_dev, ABS_X, data.x & 0xfff); input_report_abs(wm->input_dev, ABS_Y, data.y & 0xfff); input_report_abs(wm->input_dev, ABS_PRESSURE, data.p & 0xfff); @@ -455,6 +465,7 @@ static int wm97xx_read_samples(struct wm97xx *wm) wm->ts_reader_interval = wm->ts_reader_min_interval; } +out: mutex_unlock(&wm->codec_mutex); return rc; } -- cgit v1.2.3 From fa45255ee72649bd061116f7d3a765f5784bf078 Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Sat, 9 Mar 2013 15:20:50 -0800 Subject: Input: wm9712 - fix return code for wrong sample MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Instead of interpreting a wrong measurement as pen up, we should try to read again. Based on wm9712: pen up by Teresa Gámez and Christian Hemp. Signed-off-by: Markus Pargmann Acked-by: Mark Brown Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/wm9712.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/wm9712.c b/drivers/input/touchscreen/wm9712.c index 6e743e3dfda4..a983da1744e8 100644 --- a/drivers/input/touchscreen/wm9712.c +++ b/drivers/input/touchscreen/wm9712.c @@ -298,7 +298,7 @@ static int wm9712_poll_sample(struct wm97xx *wm, int adcsel, int *sample) dev_dbg(wm->dev, "adc wrong sample, wanted %x got %x", adcsel & WM97XX_ADCSEL_MASK, *sample & WM97XX_ADCSEL_MASK); - return RC_PENUP; + return RC_AGAIN; } if (wants_pen && !(*sample & WM97XX_PEN_DOWN)) { -- cgit v1.2.3 From 540792753c292bce53f42eb7b8fb3d3510f57e00 Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Sat, 9 Mar 2013 15:21:33 -0800 Subject: Input: wm9712 - fix wrong pen up readings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Often a reading can be wrong. This patch assures that this is really a pen up event and not a false reading. Based on wm9712: pen up by Teresa Gámez and Christian Hemp. Signed-off-by: Markus Pargmann Acked-by: Mark Brown Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/wm9712.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/wm9712.c b/drivers/input/touchscreen/wm9712.c index a983da1744e8..3b4eed4b8690 100644 --- a/drivers/input/touchscreen/wm9712.c +++ b/drivers/input/touchscreen/wm9712.c @@ -302,8 +302,12 @@ static int wm9712_poll_sample(struct wm97xx *wm, int adcsel, int *sample) } if (wants_pen && !(*sample & WM97XX_PEN_DOWN)) { - wm->pen_probably_down = 0; - return RC_PENUP; + /* Sometimes it reads a wrong value the first time. */ + *sample = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); + if (!(*sample & WM97XX_PEN_DOWN)) { + wm->pen_probably_down = 0; + return RC_PENUP; + } } return RC_VALID; -- cgit v1.2.3 From d73a17e6c85010f2249e823231ccc0345d1e016f Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Sat, 9 Mar 2013 15:22:35 -0800 Subject: Input: wm9712 - fix dev_dbg newlines dev_dbg should end with a new line. Signed-off-by: Markus Pargmann Acked-by: Mark Brown Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/wm9712.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/wm9712.c b/drivers/input/touchscreen/wm9712.c index 3b4eed4b8690..16b52115c27f 100644 --- a/drivers/input/touchscreen/wm9712.c +++ b/drivers/input/touchscreen/wm9712.c @@ -162,14 +162,14 @@ static void wm9712_phy_init(struct wm97xx *wm) if (rpu) { dig2 &= 0xffc0; dig2 |= WM9712_RPU(rpu); - dev_dbg(wm->dev, "setting pen detect pull-up to %d Ohms", + dev_dbg(wm->dev, "setting pen detect pull-up to %d Ohms\n", 64000 / rpu); } /* WM9712 five wire */ if (five_wire) { dig2 |= WM9712_45W; - dev_dbg(wm->dev, "setting 5-wire touchscreen mode."); + dev_dbg(wm->dev, "setting 5-wire touchscreen mode.\n"); if (pil) { dev_warn(wm->dev, "pressure measurement is not " @@ -182,21 +182,21 @@ static void wm9712_phy_init(struct wm97xx *wm) if (pil == 2) { dig2 |= WM9712_PIL; dev_dbg(wm->dev, - "setting pressure measurement current to 400uA."); + "setting pressure measurement current to 400uA.\n"); } else if (pil) dev_dbg(wm->dev, - "setting pressure measurement current to 200uA."); + "setting pressure measurement current to 200uA.\n"); if (!pil) pressure = 0; /* polling mode sample settling delay */ if (delay < 0 || delay > 15) { - dev_dbg(wm->dev, "supplied delay out of range."); + dev_dbg(wm->dev, "supplied delay out of range.\n"); delay = 4; } dig1 &= 0xff0f; dig1 |= WM97XX_DELAY(delay); - dev_dbg(wm->dev, "setting adc sample delay to %d u Secs.", + dev_dbg(wm->dev, "setting adc sample delay to %d u Secs.\n", delay_table[delay]); /* mask */ @@ -285,7 +285,7 @@ static int wm9712_poll_sample(struct wm97xx *wm, int adcsel, int *sample) if (is_pden(wm)) wm->pen_probably_down = 0; else - dev_dbg(wm->dev, "adc sample timeout"); + dev_dbg(wm->dev, "adc sample timeout\n"); return RC_PENUP; } @@ -295,7 +295,7 @@ static int wm9712_poll_sample(struct wm97xx *wm, int adcsel, int *sample) /* check we have correct sample */ if ((*sample ^ adcsel) & WM97XX_ADCSEL_MASK) { - dev_dbg(wm->dev, "adc wrong sample, wanted %x got %x", + dev_dbg(wm->dev, "adc wrong sample, wanted %x got %x\n", adcsel & WM97XX_ADCSEL_MASK, *sample & WM97XX_ADCSEL_MASK); return RC_AGAIN; @@ -349,7 +349,7 @@ static int wm9712_poll_coord(struct wm97xx *wm, struct wm97xx_data *data) if (is_pden(wm)) wm->pen_probably_down = 0; else - dev_dbg(wm->dev, "adc sample timeout"); + dev_dbg(wm->dev, "adc sample timeout\n"); return RC_PENUP; } -- cgit v1.2.3 From 628329d52474323938a03826941e166bc7c8eff4 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sat, 2 Feb 2013 11:26:13 -0800 Subject: Input: add IMS Passenger Control Unit driver The PCU is a device installed in the armrest of a plane seat and is connected to IMS Rave Entertainment System. It has a set of control buttons (Volume Up/Down, Attendant, Lights, etc) on one side and gamepad-like controls on the other side. Originally the device was handled from userspace and because of that it presents itself on USB bus as a CDC-ACM modem device that however can not make calls. However the custom handling is not as convenient as using standard input subsystem facilities. If it was pure input device it would be possible to continue using userspace solution (moving it over to uinput), but the device also has backlighted keys which can not be supported via uinput. Signed-off-by: Dmitry Torokhov --- drivers/input/misc/Kconfig | 10 + drivers/input/misc/Makefile | 1 + drivers/input/misc/ims-pcu.c | 1900 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1911 insertions(+) create mode 100644 drivers/input/misc/ims-pcu.c (limited to 'drivers/input') diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 2a1647ef5610..3ec8887ce451 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -580,6 +580,16 @@ config INPUT_ADXL34X_SPI To compile this driver as a module, choose M here: the module will be called adxl34x-spi. +config INPUT_IMS_PCU + tristate "IMS Passenger Control Unit driver" + depends on USB + depends on LEDS_CLASS + help + Say Y here if you have system with IMS Rave Passenger Control Unit. + + To compile this driver as a module, choose M here: the module will be + called ims_pcu. + config INPUT_CMA3000 tristate "VTI CMA3000 Tri-axis accelerometer" help diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 1f874afeea6a..d6873433ba71 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o +obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o diff --git a/drivers/input/misc/ims-pcu.c b/drivers/input/misc/ims-pcu.c new file mode 100644 index 000000000000..1b044b99da66 --- /dev/null +++ b/drivers/input/misc/ims-pcu.c @@ -0,0 +1,1900 @@ +/* + * Driver for IMS Passenger Control Unit Devices + * + * Copyright (C) 2013 The IMS Company + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define IMS_PCU_KEYMAP_LEN 32 + +struct ims_pcu_buttons { + struct input_dev *input; + char name[32]; + char phys[32]; + unsigned short keymap[IMS_PCU_KEYMAP_LEN]; +}; + +struct ims_pcu_gamepad { + struct input_dev *input; + char name[32]; + char phys[32]; +}; + +struct ims_pcu_backlight { + struct led_classdev cdev; + struct work_struct work; + enum led_brightness desired_brightness; + char name[32]; +}; + +#define IMS_PCU_PART_NUMBER_LEN 15 +#define IMS_PCU_SERIAL_NUMBER_LEN 8 +#define IMS_PCU_DOM_LEN 8 +#define IMS_PCU_FW_VERSION_LEN (9 + 1) +#define IMS_PCU_BL_VERSION_LEN (9 + 1) +#define IMS_PCU_BL_RESET_REASON_LEN (2 + 1) + +#define IMS_PCU_BUF_SIZE 128 + +struct ims_pcu { + struct usb_device *udev; + struct device *dev; /* control interface's device, used for logging */ + + unsigned int device_no; + + bool bootloader_mode; + + char part_number[IMS_PCU_PART_NUMBER_LEN]; + char serial_number[IMS_PCU_SERIAL_NUMBER_LEN]; + char date_of_manufacturing[IMS_PCU_DOM_LEN]; + char fw_version[IMS_PCU_FW_VERSION_LEN]; + char bl_version[IMS_PCU_BL_VERSION_LEN]; + char reset_reason[IMS_PCU_BL_RESET_REASON_LEN]; + int update_firmware_status; + + struct usb_interface *ctrl_intf; + + struct usb_endpoint_descriptor *ep_ctrl; + struct urb *urb_ctrl; + u8 *urb_ctrl_buf; + dma_addr_t ctrl_dma; + size_t max_ctrl_size; + + struct usb_interface *data_intf; + + struct usb_endpoint_descriptor *ep_in; + struct urb *urb_in; + u8 *urb_in_buf; + dma_addr_t read_dma; + size_t max_in_size; + + struct usb_endpoint_descriptor *ep_out; + u8 *urb_out_buf; + size_t max_out_size; + + u8 read_buf[IMS_PCU_BUF_SIZE]; + u8 read_pos; + u8 check_sum; + bool have_stx; + bool have_dle; + + u8 cmd_buf[IMS_PCU_BUF_SIZE]; + u8 ack_id; + u8 expected_response; + u8 cmd_buf_len; + struct completion cmd_done; + struct mutex cmd_mutex; + + u32 fw_start_addr; + u32 fw_end_addr; + struct completion async_firmware_done; + + struct ims_pcu_buttons buttons; + struct ims_pcu_gamepad *gamepad; + struct ims_pcu_backlight backlight; + + bool setup_complete; /* Input and LED devices have been created */ +}; + + +/********************************************************************* + * Buttons Input device support * + *********************************************************************/ + +static const unsigned short ims_pcu_keymap_1[] = { + [1] = KEY_ATTENDANT_OFF, + [2] = KEY_ATTENDANT_ON, + [3] = KEY_LIGHTS_TOGGLE, + [4] = KEY_VOLUMEUP, + [5] = KEY_VOLUMEDOWN, + [6] = KEY_INFO, +}; + +static const unsigned short ims_pcu_keymap_2[] = { + [4] = KEY_VOLUMEUP, + [5] = KEY_VOLUMEDOWN, + [6] = KEY_INFO, +}; + +static const unsigned short ims_pcu_keymap_3[] = { + [1] = KEY_HOMEPAGE, + [2] = KEY_ATTENDANT_TOGGLE, + [3] = KEY_LIGHTS_TOGGLE, + [4] = KEY_VOLUMEUP, + [5] = KEY_VOLUMEDOWN, + [6] = KEY_DISPLAYTOGGLE, + [18] = KEY_PLAYPAUSE, +}; + +static const unsigned short ims_pcu_keymap_4[] = { + [1] = KEY_ATTENDANT_OFF, + [2] = KEY_ATTENDANT_ON, + [3] = KEY_LIGHTS_TOGGLE, + [4] = KEY_VOLUMEUP, + [5] = KEY_VOLUMEDOWN, + [6] = KEY_INFO, + [18] = KEY_PLAYPAUSE, +}; + +static const unsigned short ims_pcu_keymap_5[] = { + [1] = KEY_ATTENDANT_OFF, + [2] = KEY_ATTENDANT_ON, + [3] = KEY_LIGHTS_TOGGLE, +}; + +struct ims_pcu_device_info { + const unsigned short *keymap; + size_t keymap_len; + bool has_gamepad; +}; + +#define IMS_PCU_DEVINFO(_n, _gamepad) \ + [_n] = { \ + .keymap = ims_pcu_keymap_##_n, \ + .keymap_len = ARRAY_SIZE(ims_pcu_keymap_##_n), \ + .has_gamepad = _gamepad, \ + } + +static const struct ims_pcu_device_info ims_pcu_device_info[] = { + IMS_PCU_DEVINFO(1, true), + IMS_PCU_DEVINFO(2, true), + IMS_PCU_DEVINFO(3, true), + IMS_PCU_DEVINFO(4, true), + IMS_PCU_DEVINFO(5, false), +}; + +static void ims_pcu_buttons_report(struct ims_pcu *pcu, u32 data) +{ + struct ims_pcu_buttons *buttons = &pcu->buttons; + struct input_dev *input = buttons->input; + int i; + + for (i = 0; i < 32; i++) { + unsigned short keycode = buttons->keymap[i]; + + if (keycode != KEY_RESERVED) + input_report_key(input, keycode, data & (1UL << i)); + } + + input_sync(input); +} + +static int ims_pcu_setup_buttons(struct ims_pcu *pcu, + const unsigned short *keymap, + size_t keymap_len) +{ + struct ims_pcu_buttons *buttons = &pcu->buttons; + struct input_dev *input; + int i; + int error; + + input = input_allocate_device(); + if (!input) { + dev_err(pcu->dev, + "Not enough memory for input input device\n"); + return -ENOMEM; + } + + snprintf(buttons->name, sizeof(buttons->name), + "IMS PCU#%d Button Interface", pcu->device_no); + + usb_make_path(pcu->udev, buttons->phys, sizeof(buttons->phys)); + strlcat(buttons->phys, "/input0", sizeof(buttons->phys)); + + memcpy(buttons->keymap, keymap, sizeof(*keymap) * keymap_len); + + input->name = buttons->name; + input->phys = buttons->phys; + usb_to_input_id(pcu->udev, &input->id); + input->dev.parent = &pcu->ctrl_intf->dev; + + input->keycode = buttons->keymap; + input->keycodemax = ARRAY_SIZE(buttons->keymap); + input->keycodesize = sizeof(buttons->keymap[0]); + + __set_bit(EV_KEY, input->evbit); + for (i = 0; i < IMS_PCU_KEYMAP_LEN; i++) + __set_bit(buttons->keymap[i], input->keybit); + __clear_bit(KEY_RESERVED, input->keybit); + + error = input_register_device(input); + if (error) { + dev_err(pcu->dev, + "Failed to register buttons input device: %d\n", + error); + input_free_device(input); + return error; + } + + buttons->input = input; + return 0; +} + +static void ims_pcu_destroy_buttons(struct ims_pcu *pcu) +{ + struct ims_pcu_buttons *buttons = &pcu->buttons; + + input_unregister_device(buttons->input); +} + + +/********************************************************************* + * Gamepad Input device support * + *********************************************************************/ + +static void ims_pcu_gamepad_report(struct ims_pcu *pcu, u32 data) +{ + struct ims_pcu_gamepad *gamepad = pcu->gamepad; + struct input_dev *input = gamepad->input; + int x, y; + + x = !!(data & (1 << 14)) - !!(data & (1 << 13)); + y = !!(data & (1 << 12)) - !!(data & (1 << 11)); + + input_report_abs(input, ABS_X, x); + input_report_abs(input, ABS_Y, y); + + input_report_key(input, BTN_A, data & (1 << 7)); + input_report_key(input, BTN_B, data & (1 << 8)); + input_report_key(input, BTN_X, data & (1 << 9)); + input_report_key(input, BTN_Y, data & (1 << 10)); + input_report_key(input, BTN_START, data & (1 << 15)); + input_report_key(input, BTN_SELECT, data & (1 << 16)); + + input_sync(input); +} + +static int ims_pcu_setup_gamepad(struct ims_pcu *pcu) +{ + struct ims_pcu_gamepad *gamepad; + struct input_dev *input; + int error; + + gamepad = kzalloc(sizeof(struct ims_pcu_gamepad), GFP_KERNEL); + input = input_allocate_device(); + if (!gamepad || !input) { + dev_err(pcu->dev, + "Not enough memory for gamepad device\n"); + return -ENOMEM; + } + + gamepad->input = input; + + snprintf(gamepad->name, sizeof(gamepad->name), + "IMS PCU#%d Gamepad Interface", pcu->device_no); + + usb_make_path(pcu->udev, gamepad->phys, sizeof(gamepad->phys)); + strlcat(gamepad->phys, "/input1", sizeof(gamepad->phys)); + + input->name = gamepad->name; + input->phys = gamepad->phys; + usb_to_input_id(pcu->udev, &input->id); + input->dev.parent = &pcu->ctrl_intf->dev; + + __set_bit(EV_KEY, input->evbit); + __set_bit(BTN_A, input->keybit); + __set_bit(BTN_B, input->keybit); + __set_bit(BTN_X, input->keybit); + __set_bit(BTN_Y, input->keybit); + __set_bit(BTN_START, input->keybit); + __set_bit(BTN_SELECT, input->keybit); + + __set_bit(EV_ABS, input->evbit); + input_set_abs_params(input, ABS_X, -1, 1, 0, 0); + input_set_abs_params(input, ABS_Y, -1, 1, 0, 0); + + error = input_register_device(input); + if (error) { + dev_err(pcu->dev, + "Failed to register gamepad input device: %d\n", + error); + goto err_free_mem; + } + + pcu->gamepad = gamepad; + return 0; + +err_free_mem: + input_free_device(input); + kfree(gamepad); + return -ENOMEM; +} + +static void ims_pcu_destroy_gamepad(struct ims_pcu *pcu) +{ + struct ims_pcu_gamepad *gamepad = pcu->gamepad; + + input_unregister_device(gamepad->input); + kfree(gamepad); +} + + +/********************************************************************* + * PCU Communication protocol handling * + *********************************************************************/ + +#define IMS_PCU_PROTOCOL_STX 0x02 +#define IMS_PCU_PROTOCOL_ETX 0x03 +#define IMS_PCU_PROTOCOL_DLE 0x10 + +/* PCU commands */ +#define IMS_PCU_CMD_STATUS 0xa0 +#define IMS_PCU_CMD_PCU_RESET 0xa1 +#define IMS_PCU_CMD_RESET_REASON 0xa2 +#define IMS_PCU_CMD_SEND_BUTTONS 0xa3 +#define IMS_PCU_CMD_JUMP_TO_BTLDR 0xa4 +#define IMS_PCU_CMD_GET_INFO 0xa5 +#define IMS_PCU_CMD_SET_BRIGHTNESS 0xa6 +#define IMS_PCU_CMD_EEPROM 0xa7 +#define IMS_PCU_CMD_GET_FW_VERSION 0xa8 +#define IMS_PCU_CMD_GET_BL_VERSION 0xa9 +#define IMS_PCU_CMD_SET_INFO 0xab +#define IMS_PCU_CMD_GET_BRIGHTNESS 0xac +#define IMS_PCU_CMD_GET_DEVICE_ID 0xae +#define IMS_PCU_CMD_SPECIAL_INFO 0xb0 +#define IMS_PCU_CMD_BOOTLOADER 0xb1 /* Pass data to bootloader */ + +/* PCU responses */ +#define IMS_PCU_RSP_STATUS 0xc0 +#define IMS_PCU_RSP_PCU_RESET 0 /* Originally 0xc1 */ +#define IMS_PCU_RSP_RESET_REASON 0xc2 +#define IMS_PCU_RSP_SEND_BUTTONS 0xc3 +#define IMS_PCU_RSP_JUMP_TO_BTLDR 0 /* Originally 0xc4 */ +#define IMS_PCU_RSP_GET_INFO 0xc5 +#define IMS_PCU_RSP_SET_BRIGHTNESS 0xc6 +#define IMS_PCU_RSP_EEPROM 0xc7 +#define IMS_PCU_RSP_GET_FW_VERSION 0xc8 +#define IMS_PCU_RSP_GET_BL_VERSION 0xc9 +#define IMS_PCU_RSP_SET_INFO 0xcb +#define IMS_PCU_RSP_GET_BRIGHTNESS 0xcc +#define IMS_PCU_RSP_CMD_INVALID 0xcd +#define IMS_PCU_RSP_GET_DEVICE_ID 0xce +#define IMS_PCU_RSP_SPECIAL_INFO 0xd0 +#define IMS_PCU_RSP_BOOTLOADER 0xd1 /* Bootloader response */ + +#define IMS_PCU_RSP_EVNT_BUTTONS 0xe0 /* Unsolicited, button state */ +#define IMS_PCU_GAMEPAD_MASK 0x0001ff80UL /* Bits 7 through 16 */ + + +#define IMS_PCU_MIN_PACKET_LEN 3 +#define IMS_PCU_DATA_OFFSET 2 + +#define IMS_PCU_CMD_WRITE_TIMEOUT 100 /* msec */ +#define IMS_PCU_CMD_RESPONSE_TIMEOUT 500 /* msec */ + +static void ims_pcu_report_events(struct ims_pcu *pcu) +{ + u32 data = get_unaligned_be32(&pcu->read_buf[3]); + + ims_pcu_buttons_report(pcu, data & ~IMS_PCU_GAMEPAD_MASK); + if (pcu->gamepad) + ims_pcu_gamepad_report(pcu, data); +} + +static void ims_pcu_handle_response(struct ims_pcu *pcu) +{ + switch (pcu->read_buf[0]) { + case IMS_PCU_RSP_EVNT_BUTTONS: + if (likely(pcu->setup_complete)) + ims_pcu_report_events(pcu); + break; + + default: + /* + * See if we got command completion. + * If both the sequence and response code match save + * the data and signal completion. + */ + if (pcu->read_buf[0] == pcu->expected_response && + pcu->read_buf[1] == pcu->ack_id - 1) { + + memcpy(pcu->cmd_buf, pcu->read_buf, pcu->read_pos); + pcu->cmd_buf_len = pcu->read_pos; + complete(&pcu->cmd_done); + } + break; + } +} + +static void ims_pcu_process_data(struct ims_pcu *pcu, struct urb *urb) +{ + int i; + + for (i = 0; i < urb->actual_length; i++) { + u8 data = pcu->urb_in_buf[i]; + + /* Skip everything until we get Start Xmit */ + if (!pcu->have_stx && data != IMS_PCU_PROTOCOL_STX) + continue; + + if (pcu->have_dle) { + pcu->have_dle = false; + pcu->read_buf[pcu->read_pos++] = data; + pcu->check_sum += data; + continue; + } + + switch (data) { + case IMS_PCU_PROTOCOL_STX: + if (pcu->have_stx) + dev_warn(pcu->dev, + "Unexpected STX at byte %d, discarding old data\n", + pcu->read_pos); + pcu->have_stx = true; + pcu->have_dle = false; + pcu->read_pos = 0; + pcu->check_sum = 0; + break; + + case IMS_PCU_PROTOCOL_DLE: + pcu->have_dle = true; + break; + + case IMS_PCU_PROTOCOL_ETX: + if (pcu->read_pos < IMS_PCU_MIN_PACKET_LEN) { + dev_warn(pcu->dev, + "Short packet received (%d bytes), ignoring\n", + pcu->read_pos); + } else if (pcu->check_sum != 0) { + dev_warn(pcu->dev, + "Invalid checksum in packet (%d bytes), ignoring\n", + pcu->read_pos); + } else { + ims_pcu_handle_response(pcu); + } + + pcu->have_stx = false; + pcu->have_dle = false; + pcu->read_pos = 0; + break; + + default: + pcu->read_buf[pcu->read_pos++] = data; + pcu->check_sum += data; + break; + } + } +} + +static bool ims_pcu_byte_needs_escape(u8 byte) +{ + return byte == IMS_PCU_PROTOCOL_STX || + byte == IMS_PCU_PROTOCOL_ETX || + byte == IMS_PCU_PROTOCOL_DLE; +} + +static int ims_pcu_send_cmd_chunk(struct ims_pcu *pcu, + u8 command, int chunk, int len) +{ + int error; + + error = usb_bulk_msg(pcu->udev, + usb_sndbulkpipe(pcu->udev, + pcu->ep_out->bEndpointAddress), + pcu->urb_out_buf, len, + NULL, IMS_PCU_CMD_WRITE_TIMEOUT); + if (error < 0) { + dev_dbg(pcu->dev, + "Sending 0x%02x command failed at chunk %d: %d\n", + command, chunk, error); + return error; + } + + return 0; +} + +static int ims_pcu_send_command(struct ims_pcu *pcu, + u8 command, const u8 *data, int len) +{ + int count = 0; + int chunk = 0; + int delta; + int i; + int error; + u8 csum = 0; + u8 ack_id; + + pcu->urb_out_buf[count++] = IMS_PCU_PROTOCOL_STX; + + /* We know the command need not be escaped */ + pcu->urb_out_buf[count++] = command; + csum += command; + + ack_id = pcu->ack_id++; + if (ack_id == 0xff) + ack_id = pcu->ack_id++; + + if (ims_pcu_byte_needs_escape(ack_id)) + pcu->urb_out_buf[count++] = IMS_PCU_PROTOCOL_DLE; + + pcu->urb_out_buf[count++] = ack_id; + csum += ack_id; + + for (i = 0; i < len; i++) { + + delta = ims_pcu_byte_needs_escape(data[i]) ? 2 : 1; + if (count + delta >= pcu->max_out_size) { + error = ims_pcu_send_cmd_chunk(pcu, command, + ++chunk, count); + if (error) + return error; + + count = 0; + } + + if (delta == 2) + pcu->urb_out_buf[count++] = IMS_PCU_PROTOCOL_DLE; + + pcu->urb_out_buf[count++] = data[i]; + csum += data[i]; + } + + csum = 1 + ~csum; + + delta = ims_pcu_byte_needs_escape(csum) ? 3 : 2; + if (count + delta >= pcu->max_out_size) { + error = ims_pcu_send_cmd_chunk(pcu, command, ++chunk, count); + if (error) + return error; + + count = 0; + } + + if (delta == 3) + pcu->urb_out_buf[count++] = IMS_PCU_PROTOCOL_DLE; + + pcu->urb_out_buf[count++] = csum; + pcu->urb_out_buf[count++] = IMS_PCU_PROTOCOL_ETX; + + return ims_pcu_send_cmd_chunk(pcu, command, ++chunk, count); +} + +static int __ims_pcu_execute_command(struct ims_pcu *pcu, + u8 command, const void *data, size_t len, + u8 expected_response, int response_time) +{ + int error; + + pcu->expected_response = expected_response; + init_completion(&pcu->cmd_done); + + error = ims_pcu_send_command(pcu, command, data, len); + if (error) + return error; + + if (expected_response && + !wait_for_completion_timeout(&pcu->cmd_done, + msecs_to_jiffies(response_time))) { + dev_dbg(pcu->dev, "Command 0x%02x timed out\n", command); + return -ETIMEDOUT; + } + + return 0; +} + +#define ims_pcu_execute_command(pcu, code, data, len) \ + __ims_pcu_execute_command(pcu, \ + IMS_PCU_CMD_##code, data, len, \ + IMS_PCU_RSP_##code, \ + IMS_PCU_CMD_RESPONSE_TIMEOUT) + +#define ims_pcu_execute_query(pcu, code) \ + ims_pcu_execute_command(pcu, code, NULL, 0) + +/* Bootloader commands */ +#define IMS_PCU_BL_CMD_QUERY_DEVICE 0xa1 +#define IMS_PCU_BL_CMD_UNLOCK_CONFIG 0xa2 +#define IMS_PCU_BL_CMD_ERASE_APP 0xa3 +#define IMS_PCU_BL_CMD_PROGRAM_DEVICE 0xa4 +#define IMS_PCU_BL_CMD_PROGRAM_COMPLETE 0xa5 +#define IMS_PCU_BL_CMD_READ_APP 0xa6 +#define IMS_PCU_BL_CMD_RESET_DEVICE 0xa7 +#define IMS_PCU_BL_CMD_LAUNCH_APP 0xa8 + +/* Bootloader commands */ +#define IMS_PCU_BL_RSP_QUERY_DEVICE 0xc1 +#define IMS_PCU_BL_RSP_UNLOCK_CONFIG 0xc2 +#define IMS_PCU_BL_RSP_ERASE_APP 0xc3 +#define IMS_PCU_BL_RSP_PROGRAM_DEVICE 0xc4 +#define IMS_PCU_BL_RSP_PROGRAM_COMPLETE 0xc5 +#define IMS_PCU_BL_RSP_READ_APP 0xc6 +#define IMS_PCU_BL_RSP_RESET_DEVICE 0 /* originally 0xa7 */ +#define IMS_PCU_BL_RSP_LAUNCH_APP 0 /* originally 0xa8 */ + +#define IMS_PCU_BL_DATA_OFFSET 3 + +static int __ims_pcu_execute_bl_command(struct ims_pcu *pcu, + u8 command, const void *data, size_t len, + u8 expected_response, int response_time) +{ + int error; + + pcu->cmd_buf[0] = command; + if (data) + memcpy(&pcu->cmd_buf[1], data, len); + + error = __ims_pcu_execute_command(pcu, + IMS_PCU_CMD_BOOTLOADER, pcu->cmd_buf, len + 1, + expected_response ? IMS_PCU_RSP_BOOTLOADER : 0, + response_time); + if (error) { + dev_err(pcu->dev, + "Failure when sending 0x%02x command to bootloader, error: %d\n", + pcu->cmd_buf[0], error); + return error; + } + + if (expected_response && pcu->cmd_buf[2] != expected_response) { + dev_err(pcu->dev, + "Unexpected response from bootloader: 0x%02x, wanted 0x%02x\n", + pcu->cmd_buf[2], expected_response); + return -EINVAL; + } + + return 0; +} + +#define ims_pcu_execute_bl_command(pcu, code, data, len, timeout) \ + __ims_pcu_execute_bl_command(pcu, \ + IMS_PCU_BL_CMD_##code, data, len, \ + IMS_PCU_BL_RSP_##code, timeout) \ + +#define IMS_PCU_INFO_PART_OFFSET 2 +#define IMS_PCU_INFO_DOM_OFFSET 17 +#define IMS_PCU_INFO_SERIAL_OFFSET 25 + +#define IMS_PCU_SET_INFO_SIZE 31 + +static int ims_pcu_get_info(struct ims_pcu *pcu) +{ + int error; + + error = ims_pcu_execute_query(pcu, GET_INFO); + if (error) { + dev_err(pcu->dev, + "GET_INFO command failed, error: %d\n", error); + return error; + } + + memcpy(pcu->part_number, + &pcu->cmd_buf[IMS_PCU_INFO_PART_OFFSET], + sizeof(pcu->part_number)); + memcpy(pcu->date_of_manufacturing, + &pcu->cmd_buf[IMS_PCU_INFO_DOM_OFFSET], + sizeof(pcu->date_of_manufacturing)); + memcpy(pcu->serial_number, + &pcu->cmd_buf[IMS_PCU_INFO_SERIAL_OFFSET], + sizeof(pcu->serial_number)); + + return 0; +} + +static int ims_pcu_set_info(struct ims_pcu *pcu) +{ + int error; + + memcpy(&pcu->cmd_buf[IMS_PCU_INFO_PART_OFFSET], + pcu->part_number, sizeof(pcu->part_number)); + memcpy(&pcu->cmd_buf[IMS_PCU_INFO_DOM_OFFSET], + pcu->date_of_manufacturing, sizeof(pcu->date_of_manufacturing)); + memcpy(&pcu->cmd_buf[IMS_PCU_INFO_SERIAL_OFFSET], + pcu->serial_number, sizeof(pcu->serial_number)); + + error = ims_pcu_execute_command(pcu, SET_INFO, + &pcu->cmd_buf[IMS_PCU_DATA_OFFSET], + IMS_PCU_SET_INFO_SIZE); + if (error) { + dev_err(pcu->dev, + "Failed to update device information, error: %d\n", + error); + return error; + } + + return 0; +} + +static int ims_pcu_switch_to_bootloader(struct ims_pcu *pcu) +{ + int error; + + /* Execute jump to the bootoloader */ + error = ims_pcu_execute_command(pcu, JUMP_TO_BTLDR, NULL, 0); + if (error) { + dev_err(pcu->dev, + "Failure when sending JUMP TO BOOLTLOADER command, error: %d\n", + error); + return error; + } + + return 0; +} + +/********************************************************************* + * Firmware Update handling * + *********************************************************************/ + +#define IMS_PCU_FIRMWARE_NAME "imspcu.fw" + +struct ims_pcu_flash_fmt { + __le32 addr; + u8 len; + u8 data[]; +}; + +static unsigned int ims_pcu_count_fw_records(const struct firmware *fw) +{ + const struct ihex_binrec *rec = (const struct ihex_binrec *)fw->data; + unsigned int count = 0; + + while (rec) { + count++; + rec = ihex_next_binrec(rec); + } + + return count; +} + +static int ims_pcu_verify_block(struct ims_pcu *pcu, + u32 addr, u8 len, const u8 *data) +{ + struct ims_pcu_flash_fmt *fragment; + int error; + + fragment = (void *)&pcu->cmd_buf[1]; + put_unaligned_le32(addr, &fragment->addr); + fragment->len = len; + + error = ims_pcu_execute_bl_command(pcu, READ_APP, NULL, 5, + IMS_PCU_CMD_RESPONSE_TIMEOUT); + if (error) { + dev_err(pcu->dev, + "Failed to retrieve block at 0x%08x, len %d, error: %d\n", + addr, len, error); + return error; + } + + fragment = (void *)&pcu->cmd_buf[IMS_PCU_BL_DATA_OFFSET]; + if (get_unaligned_le32(&fragment->addr) != addr || + fragment->len != len) { + dev_err(pcu->dev, + "Wrong block when retrieving 0x%08x (0x%08x), len %d (%d)\n", + addr, get_unaligned_le32(&fragment->addr), + len, fragment->len); + return -EINVAL; + } + + if (memcmp(fragment->data, data, len)) { + dev_err(pcu->dev, + "Mismatch in block at 0x%08x, len %d\n", + addr, len); + return -EINVAL; + } + + return 0; +} + +static int ims_pcu_flash_firmware(struct ims_pcu *pcu, + const struct firmware *fw, + unsigned int n_fw_records) +{ + const struct ihex_binrec *rec = (const struct ihex_binrec *)fw->data; + struct ims_pcu_flash_fmt *fragment; + unsigned int count = 0; + u32 addr; + u8 len; + int error; + + error = ims_pcu_execute_bl_command(pcu, ERASE_APP, NULL, 0, 2000); + if (error) { + dev_err(pcu->dev, + "Failed to erase application image, error: %d\n", + error); + return error; + } + + while (rec) { + /* + * The firmware format is messed up for some reason. + * The address twice that of what is needed for some + * reason and we end up overwriting half of the data + * with the next record. + */ + addr = be32_to_cpu(rec->addr) / 2; + len = be16_to_cpu(rec->len); + + fragment = (void *)&pcu->cmd_buf[1]; + put_unaligned_le32(addr, &fragment->addr); + fragment->len = len; + memcpy(fragment->data, rec->data, len); + + error = ims_pcu_execute_bl_command(pcu, PROGRAM_DEVICE, + NULL, len + 5, + IMS_PCU_CMD_RESPONSE_TIMEOUT); + if (error) { + dev_err(pcu->dev, + "Failed to write block at 0x%08x, len %d, error: %d\n", + addr, len, error); + return error; + } + + if (addr >= pcu->fw_start_addr && addr < pcu->fw_end_addr) { + error = ims_pcu_verify_block(pcu, addr, len, rec->data); + if (error) + return error; + } + + count++; + pcu->update_firmware_status = (count * 100) / n_fw_records; + + rec = ihex_next_binrec(rec); + } + + error = ims_pcu_execute_bl_command(pcu, PROGRAM_COMPLETE, + NULL, 0, 2000); + if (error) + dev_err(pcu->dev, + "Failed to send PROGRAM_COMPLETE, error: %d\n", + error); + + return 0; +} + +static int ims_pcu_handle_firmware_update(struct ims_pcu *pcu, + const struct firmware *fw) +{ + unsigned int n_fw_records; + int retval; + + dev_info(pcu->dev, "Updating firmware %s, size: %zu\n", + IMS_PCU_FIRMWARE_NAME, fw->size); + + n_fw_records = ims_pcu_count_fw_records(fw); + + retval = ims_pcu_flash_firmware(pcu, fw, n_fw_records); + if (retval) + goto out; + + retval = ims_pcu_execute_bl_command(pcu, LAUNCH_APP, NULL, 0, 0); + if (retval) + dev_err(pcu->dev, + "Failed to start application image, error: %d\n", + retval); + +out: + pcu->update_firmware_status = retval; + sysfs_notify(&pcu->dev->kobj, NULL, "update_firmware_status"); + return retval; +} + +static void ims_pcu_process_async_firmware(const struct firmware *fw, + void *context) +{ + struct ims_pcu *pcu = context; + int error; + + if (!fw) { + dev_err(pcu->dev, "Failed to get firmware %s\n", + IMS_PCU_FIRMWARE_NAME); + goto out; + } + + error = ihex_validate_fw(fw); + if (error) { + dev_err(pcu->dev, "Firmware %s is invalid\n", + IMS_PCU_FIRMWARE_NAME); + goto out; + } + + mutex_lock(&pcu->cmd_mutex); + ims_pcu_handle_firmware_update(pcu, fw); + mutex_unlock(&pcu->cmd_mutex); + + release_firmware(fw); + +out: + complete(&pcu->async_firmware_done); +} + +/********************************************************************* + * Backlight LED device support * + *********************************************************************/ + +#define IMS_PCU_MAX_BRIGHTNESS 31998 + +static void ims_pcu_backlight_work(struct work_struct *work) +{ + struct ims_pcu_backlight *backlight = + container_of(work, struct ims_pcu_backlight, work); + struct ims_pcu *pcu = + container_of(backlight, struct ims_pcu, backlight); + int desired_brightness = backlight->desired_brightness; + __le16 br_val = cpu_to_le16(desired_brightness); + int error; + + mutex_lock(&pcu->cmd_mutex); + + error = ims_pcu_execute_command(pcu, SET_BRIGHTNESS, + &br_val, sizeof(br_val)); + if (error && error != -ENODEV) + dev_warn(pcu->dev, + "Failed to set desired brightness %u, error: %d\n", + desired_brightness, error); + + mutex_unlock(&pcu->cmd_mutex); +} + +static void ims_pcu_backlight_set_brightness(struct led_classdev *cdev, + enum led_brightness value) +{ + struct ims_pcu_backlight *backlight = + container_of(cdev, struct ims_pcu_backlight, cdev); + + backlight->desired_brightness = value; + schedule_work(&backlight->work); +} + +static enum led_brightness +ims_pcu_backlight_get_brightness(struct led_classdev *cdev) +{ + struct ims_pcu_backlight *backlight = + container_of(cdev, struct ims_pcu_backlight, cdev); + struct ims_pcu *pcu = + container_of(backlight, struct ims_pcu, backlight); + int brightness; + int error; + + mutex_lock(&pcu->cmd_mutex); + + error = ims_pcu_execute_query(pcu, GET_BRIGHTNESS); + if (error) { + dev_warn(pcu->dev, + "Failed to get current brightness, error: %d\n", + error); + /* Assume the LED is OFF */ + brightness = LED_OFF; + } else { + brightness = + get_unaligned_le16(&pcu->cmd_buf[IMS_PCU_DATA_OFFSET]); + } + + mutex_unlock(&pcu->cmd_mutex); + + return brightness; +} + +static int ims_pcu_setup_backlight(struct ims_pcu *pcu) +{ + struct ims_pcu_backlight *backlight = &pcu->backlight; + int error; + + INIT_WORK(&backlight->work, ims_pcu_backlight_work); + snprintf(backlight->name, sizeof(backlight->name), + "pcu%d::kbd_backlight", pcu->device_no); + + backlight->cdev.name = backlight->name; + backlight->cdev.max_brightness = IMS_PCU_MAX_BRIGHTNESS; + backlight->cdev.brightness_get = ims_pcu_backlight_get_brightness; + backlight->cdev.brightness_set = ims_pcu_backlight_set_brightness; + + error = led_classdev_register(pcu->dev, &backlight->cdev); + if (error) { + dev_err(pcu->dev, + "Failed to register backlight LED device, error: %d\n", + error); + return error; + } + + return 0; +} + +static void ims_pcu_destroy_backlight(struct ims_pcu *pcu) +{ + struct ims_pcu_backlight *backlight = &pcu->backlight; + + led_classdev_unregister(&backlight->cdev); + cancel_work_sync(&backlight->work); +} + + +/********************************************************************* + * Sysfs attributes handling * + *********************************************************************/ + +struct ims_pcu_attribute { + struct device_attribute dattr; + size_t field_offset; + int field_length; +}; + +static ssize_t ims_pcu_attribute_show(struct device *dev, + struct device_attribute *dattr, + char *buf) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct ims_pcu *pcu = usb_get_intfdata(intf); + struct ims_pcu_attribute *attr = + container_of(dattr, struct ims_pcu_attribute, dattr); + char *field = (char *)pcu + attr->field_offset; + + return scnprintf(buf, PAGE_SIZE, "%.*s\n", attr->field_length, field); +} + +static ssize_t ims_pcu_attribute_store(struct device *dev, + struct device_attribute *dattr, + const char *buf, size_t count) +{ + + struct usb_interface *intf = to_usb_interface(dev); + struct ims_pcu *pcu = usb_get_intfdata(intf); + struct ims_pcu_attribute *attr = + container_of(dattr, struct ims_pcu_attribute, dattr); + char *field = (char *)pcu + attr->field_offset; + size_t data_len; + int error; + + if (count > attr->field_length) + return -EINVAL; + + data_len = strnlen(buf, attr->field_length); + if (data_len > attr->field_length) + return -EINVAL; + + error = mutex_lock_interruptible(&pcu->cmd_mutex); + if (error) + return error; + + memset(field, 0, attr->field_length); + memcpy(field, buf, data_len); + + error = ims_pcu_set_info(pcu); + + /* + * Even if update failed, let's fetch the info again as we just + * clobbered one of the fields. + */ + ims_pcu_get_info(pcu); + + mutex_unlock(&pcu->cmd_mutex); + + return error < 0 ? error : count; +} + +#define IMS_PCU_ATTR(_field, _mode) \ +struct ims_pcu_attribute ims_pcu_attr_##_field = { \ + .dattr = __ATTR(_field, _mode, \ + ims_pcu_attribute_show, \ + ims_pcu_attribute_store), \ + .field_offset = offsetof(struct ims_pcu, _field), \ + .field_length = sizeof(((struct ims_pcu *)NULL)->_field), \ +} + +#define IMS_PCU_RO_ATTR(_field) \ + IMS_PCU_ATTR(_field, S_IRUGO) +#define IMS_PCU_RW_ATTR(_field) \ + IMS_PCU_ATTR(_field, S_IRUGO | S_IWUSR) + +static IMS_PCU_RW_ATTR(part_number); +static IMS_PCU_RW_ATTR(serial_number); +static IMS_PCU_RW_ATTR(date_of_manufacturing); + +static IMS_PCU_RO_ATTR(fw_version); +static IMS_PCU_RO_ATTR(bl_version); +static IMS_PCU_RO_ATTR(reset_reason); + +static ssize_t ims_pcu_reset_device(struct device *dev, + struct device_attribute *dattr, + const char *buf, size_t count) +{ + static const u8 reset_byte = 1; + struct usb_interface *intf = to_usb_interface(dev); + struct ims_pcu *pcu = usb_get_intfdata(intf); + int value; + int error; + + error = kstrtoint(buf, 0, &value); + if (error) + return error; + + if (value != 1) + return -EINVAL; + + dev_info(pcu->dev, "Attempting to reset device\n"); + + error = ims_pcu_execute_command(pcu, PCU_RESET, &reset_byte, 1); + if (error) { + dev_info(pcu->dev, + "Failed to reset device, error: %d\n", + error); + return error; + } + + return count; +} + +static DEVICE_ATTR(reset_device, S_IWUSR, NULL, ims_pcu_reset_device); + +static ssize_t ims_pcu_update_firmware_store(struct device *dev, + struct device_attribute *dattr, + const char *buf, size_t count) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct ims_pcu *pcu = usb_get_intfdata(intf); + const struct firmware *fw; + int value; + int error; + + error = kstrtoint(buf, 0, &value); + if (error) + return error; + + if (value != 1) + return -EINVAL; + + error = mutex_lock_interruptible(&pcu->cmd_mutex); + if (error) + return error; + + error = request_ihex_firmware(&fw, IMS_PCU_FIRMWARE_NAME, pcu->dev); + if (error) { + dev_err(pcu->dev, "Failed to request firmware %s, error: %d\n", + IMS_PCU_FIRMWARE_NAME, error); + goto out; + } + + /* + * If we are already in bootloader mode we can proceed with + * flashing the firmware. + * + * If we are in application mode, then we need to switch into + * bootloader mode, which will cause the device to disconnect + * and reconnect as different device. + */ + if (pcu->bootloader_mode) + error = ims_pcu_handle_firmware_update(pcu, fw); + else + error = ims_pcu_switch_to_bootloader(pcu); + + release_firmware(fw); + +out: + mutex_unlock(&pcu->cmd_mutex); + return error ?: count; +} + +static DEVICE_ATTR(update_firmware, S_IWUSR, + NULL, ims_pcu_update_firmware_store); + +static ssize_t +ims_pcu_update_firmware_status_show(struct device *dev, + struct device_attribute *dattr, + char *buf) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct ims_pcu *pcu = usb_get_intfdata(intf); + + return scnprintf(buf, PAGE_SIZE, "%d\n", pcu->update_firmware_status); +} + +static DEVICE_ATTR(update_firmware_status, S_IRUGO, + ims_pcu_update_firmware_status_show, NULL); + +static struct attribute *ims_pcu_attrs[] = { + &ims_pcu_attr_part_number.dattr.attr, + &ims_pcu_attr_serial_number.dattr.attr, + &ims_pcu_attr_date_of_manufacturing.dattr.attr, + &ims_pcu_attr_fw_version.dattr.attr, + &ims_pcu_attr_bl_version.dattr.attr, + &ims_pcu_attr_reset_reason.dattr.attr, + &dev_attr_reset_device.attr, + &dev_attr_update_firmware.attr, + &dev_attr_update_firmware_status.attr, + NULL +}; + +static umode_t ims_pcu_is_attr_visible(struct kobject *kobj, + struct attribute *attr, int n) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct usb_interface *intf = to_usb_interface(dev); + struct ims_pcu *pcu = usb_get_intfdata(intf); + umode_t mode = attr->mode; + + if (pcu->bootloader_mode) { + if (attr != &dev_attr_update_firmware_status.attr && + attr != &dev_attr_update_firmware.attr && + attr != &dev_attr_reset_device.attr) { + mode = 0; + } + } else { + if (attr == &dev_attr_update_firmware_status.attr) + mode = 0; + } + + return mode; +} + +static struct attribute_group ims_pcu_attr_group = { + .is_visible = ims_pcu_is_attr_visible, + .attrs = ims_pcu_attrs, +}; + +static void ims_pcu_irq(struct urb *urb) +{ + struct ims_pcu *pcu = urb->context; + int retval, status; + + status = urb->status; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(pcu->dev, "%s - urb shutting down with status: %d\n", + __func__, status); + return; + default: + dev_dbg(pcu->dev, "%s - nonzero urb status received: %d\n", + __func__, status); + goto exit; + } + + dev_dbg(pcu->dev, "%s: received %d: %*ph\n", __func__, + urb->actual_length, urb->actual_length, pcu->urb_in_buf); + + if (urb == pcu->urb_in) + ims_pcu_process_data(pcu, urb); + +exit: + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval && retval != -ENODEV) + dev_err(pcu->dev, "%s - usb_submit_urb failed with result %d\n", + __func__, retval); +} + +static int ims_pcu_buffers_alloc(struct ims_pcu *pcu) +{ + int error; + + pcu->urb_in_buf = usb_alloc_coherent(pcu->udev, pcu->max_in_size, + GFP_KERNEL, &pcu->read_dma); + if (!pcu->urb_in_buf) { + dev_err(pcu->dev, + "Failed to allocate memory for read buffer\n"); + return -ENOMEM; + } + + pcu->urb_in = usb_alloc_urb(0, GFP_KERNEL); + if (!pcu->urb_in) { + dev_err(pcu->dev, "Failed to allocate input URB\n"); + error = -ENOMEM; + goto err_free_urb_in_buf; + } + + pcu->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + pcu->urb_in->transfer_dma = pcu->read_dma; + + usb_fill_bulk_urb(pcu->urb_in, pcu->udev, + usb_rcvbulkpipe(pcu->udev, + pcu->ep_in->bEndpointAddress), + pcu->urb_in_buf, pcu->max_in_size, + ims_pcu_irq, pcu); + + /* + * We are using usb_bulk_msg() for sending so there is no point + * in allocating memory with usb_alloc_coherent(). + */ + pcu->urb_out_buf = kmalloc(pcu->max_out_size, GFP_KERNEL); + if (!pcu->urb_out_buf) { + dev_err(pcu->dev, "Failed to allocate memory for write buffer\n"); + error = -ENOMEM; + goto err_free_in_urb; + } + + pcu->urb_ctrl_buf = usb_alloc_coherent(pcu->udev, pcu->max_ctrl_size, + GFP_KERNEL, &pcu->ctrl_dma); + if (!pcu->urb_ctrl_buf) { + dev_err(pcu->dev, + "Failed to allocate memory for read buffer\n"); + goto err_free_urb_out_buf; + } + + pcu->urb_ctrl = usb_alloc_urb(0, GFP_KERNEL); + if (!pcu->urb_ctrl) { + dev_err(pcu->dev, "Failed to allocate input URB\n"); + error = -ENOMEM; + goto err_free_urb_ctrl_buf; + } + + pcu->urb_ctrl->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + pcu->urb_ctrl->transfer_dma = pcu->ctrl_dma; + + usb_fill_int_urb(pcu->urb_ctrl, pcu->udev, + usb_rcvintpipe(pcu->udev, + pcu->ep_ctrl->bEndpointAddress), + pcu->urb_ctrl_buf, pcu->max_ctrl_size, + ims_pcu_irq, pcu, pcu->ep_ctrl->bInterval); + + return 0; + +err_free_urb_ctrl_buf: + usb_free_coherent(pcu->udev, pcu->max_ctrl_size, + pcu->urb_ctrl_buf, pcu->ctrl_dma); +err_free_urb_out_buf: + kfree(pcu->urb_out_buf); +err_free_in_urb: + usb_free_urb(pcu->urb_in); +err_free_urb_in_buf: + usb_free_coherent(pcu->udev, pcu->max_in_size, + pcu->urb_in_buf, pcu->read_dma); + return error; +} + +static void ims_pcu_buffers_free(struct ims_pcu *pcu) +{ + usb_kill_urb(pcu->urb_in); + usb_free_urb(pcu->urb_in); + + usb_free_coherent(pcu->udev, pcu->max_out_size, + pcu->urb_in_buf, pcu->read_dma); + + kfree(pcu->urb_out_buf); + + usb_kill_urb(pcu->urb_ctrl); + usb_free_urb(pcu->urb_ctrl); + + usb_free_coherent(pcu->udev, pcu->max_ctrl_size, + pcu->urb_ctrl_buf, pcu->ctrl_dma); +} + +static const struct usb_cdc_union_desc * +ims_pcu_get_cdc_union_desc(struct usb_interface *intf) +{ + const void *buf = intf->altsetting->extra; + size_t buflen = intf->altsetting->extralen; + struct usb_cdc_union_desc *union_desc; + + if (!buf) { + dev_err(&intf->dev, "Missing descriptor data\n"); + return NULL; + } + + if (!buflen) { + dev_err(&intf->dev, "Zero length descriptor\n"); + return NULL; + } + + while (buflen > 0) { + union_desc = (struct usb_cdc_union_desc *)buf; + + if (union_desc->bDescriptorType == USB_DT_CS_INTERFACE && + union_desc->bDescriptorSubType == USB_CDC_UNION_TYPE) { + dev_dbg(&intf->dev, "Found union header\n"); + return union_desc; + } + + buflen -= union_desc->bLength; + buf += union_desc->bLength; + } + + dev_err(&intf->dev, "Missing CDC union descriptor\n"); + return NULL; +} + +static int ims_pcu_parse_cdc_data(struct usb_interface *intf, struct ims_pcu *pcu) +{ + const struct usb_cdc_union_desc *union_desc; + struct usb_host_interface *alt; + + union_desc = ims_pcu_get_cdc_union_desc(intf); + if (!union_desc) + return -EINVAL; + + pcu->ctrl_intf = usb_ifnum_to_if(pcu->udev, + union_desc->bMasterInterface0); + + alt = pcu->ctrl_intf->cur_altsetting; + pcu->ep_ctrl = &alt->endpoint[0].desc; + pcu->max_ctrl_size = usb_endpoint_maxp(pcu->ep_ctrl); + + pcu->data_intf = usb_ifnum_to_if(pcu->udev, + union_desc->bSlaveInterface0); + + alt = pcu->data_intf->cur_altsetting; + if (alt->desc.bNumEndpoints != 2) { + dev_err(pcu->dev, + "Incorrect number of endpoints on data interface (%d)\n", + alt->desc.bNumEndpoints); + return -EINVAL; + } + + pcu->ep_out = &alt->endpoint[0].desc; + if (!usb_endpoint_is_bulk_out(pcu->ep_out)) { + dev_err(pcu->dev, + "First endpoint on data interface is not BULK OUT\n"); + return -EINVAL; + } + + pcu->max_out_size = usb_endpoint_maxp(pcu->ep_out); + if (pcu->max_out_size < 8) { + dev_err(pcu->dev, + "Max OUT packet size is too small (%zd)\n", + pcu->max_out_size); + return -EINVAL; + } + + pcu->ep_in = &alt->endpoint[1].desc; + if (!usb_endpoint_is_bulk_in(pcu->ep_in)) { + dev_err(pcu->dev, + "Second endpoint on data interface is not BULK IN\n"); + return -EINVAL; + } + + pcu->max_in_size = usb_endpoint_maxp(pcu->ep_in); + if (pcu->max_in_size < 8) { + dev_err(pcu->dev, + "Max IN packet size is too small (%zd)\n", + pcu->max_in_size); + return -EINVAL; + } + + return 0; +} + +static int ims_pcu_start_io(struct ims_pcu *pcu) +{ + int error; + + error = usb_submit_urb(pcu->urb_ctrl, GFP_KERNEL); + if (error) { + dev_err(pcu->dev, + "Failed to start control IO - usb_submit_urb failed with result: %d\n", + error); + return -EIO; + } + + error = usb_submit_urb(pcu->urb_in, GFP_KERNEL); + if (error) { + dev_err(pcu->dev, + "Failed to start IO - usb_submit_urb failed with result: %d\n", + error); + usb_kill_urb(pcu->urb_ctrl); + return -EIO; + } + + return 0; +} + +static void ims_pcu_stop_io(struct ims_pcu *pcu) +{ + usb_kill_urb(pcu->urb_in); + usb_kill_urb(pcu->urb_ctrl); +} + +static int ims_pcu_line_setup(struct ims_pcu *pcu) +{ + struct usb_host_interface *interface = pcu->ctrl_intf->cur_altsetting; + struct usb_cdc_line_coding *line = (void *)pcu->cmd_buf; + int error; + + memset(line, 0, sizeof(*line)); + line->dwDTERate = cpu_to_le32(57600); + line->bDataBits = 8; + + error = usb_control_msg(pcu->udev, usb_sndctrlpipe(pcu->udev, 0), + USB_CDC_REQ_SET_LINE_CODING, + USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, interface->desc.bInterfaceNumber, + line, sizeof(struct usb_cdc_line_coding), + 5000); + if (error < 0) { + dev_err(pcu->dev, "Failed to set line coding, error: %d\n", + error); + return error; + } + + error = usb_control_msg(pcu->udev, usb_sndctrlpipe(pcu->udev, 0), + USB_CDC_REQ_SET_CONTROL_LINE_STATE, + USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0x03, interface->desc.bInterfaceNumber, + NULL, 0, 5000); + if (error < 0) { + dev_err(pcu->dev, "Failed to set line state, error: %d\n", + error); + return error; + } + + return 0; +} + +static int ims_pcu_get_device_info(struct ims_pcu *pcu) +{ + int error; + + error = ims_pcu_get_info(pcu); + if (error) + return error; + + error = ims_pcu_execute_query(pcu, GET_FW_VERSION); + if (error) { + dev_err(pcu->dev, + "GET_FW_VERSION command failed, error: %d\n", error); + return error; + } + + snprintf(pcu->fw_version, sizeof(pcu->fw_version), + "%02d%02d%02d%02d.%c%c", + pcu->cmd_buf[2], pcu->cmd_buf[3], pcu->cmd_buf[4], pcu->cmd_buf[5], + pcu->cmd_buf[6], pcu->cmd_buf[7]); + + error = ims_pcu_execute_query(pcu, GET_BL_VERSION); + if (error) { + dev_err(pcu->dev, + "GET_BL_VERSION command failed, error: %d\n", error); + return error; + } + + snprintf(pcu->bl_version, sizeof(pcu->bl_version), + "%02d%02d%02d%02d.%c%c", + pcu->cmd_buf[2], pcu->cmd_buf[3], pcu->cmd_buf[4], pcu->cmd_buf[5], + pcu->cmd_buf[6], pcu->cmd_buf[7]); + + error = ims_pcu_execute_query(pcu, RESET_REASON); + if (error) { + dev_err(pcu->dev, + "RESET_REASON command failed, error: %d\n", error); + return error; + } + + snprintf(pcu->reset_reason, sizeof(pcu->reset_reason), + "%02x", pcu->cmd_buf[IMS_PCU_DATA_OFFSET]); + + dev_dbg(pcu->dev, + "P/N: %s, MD: %s, S/N: %s, FW: %s, BL: %s, RR: %s\n", + pcu->part_number, + pcu->date_of_manufacturing, + pcu->serial_number, + pcu->fw_version, + pcu->bl_version, + pcu->reset_reason); + + return 0; +} + +static int ims_pcu_identify_type(struct ims_pcu *pcu, u8 *device_id) +{ + int error; + + error = ims_pcu_execute_query(pcu, GET_DEVICE_ID); + if (error) { + dev_err(pcu->dev, + "GET_DEVICE_ID command failed, error: %d\n", error); + return error; + } + + *device_id = pcu->cmd_buf[IMS_PCU_DATA_OFFSET]; + dev_dbg(pcu->dev, "Detected device ID: %d\n", *device_id); + + return 0; +} + +static int ims_pcu_init_application_mode(struct ims_pcu *pcu) +{ + static atomic_t device_no = ATOMIC_INIT(0); + + const struct ims_pcu_device_info *info; + u8 device_id; + int error; + + error = ims_pcu_get_device_info(pcu); + if (error) { + /* Device does not respond to basic queries, hopeless */ + return error; + } + + error = ims_pcu_identify_type(pcu, &device_id); + if (error) { + dev_err(pcu->dev, + "Failed to identify device, error: %d\n", error); + /* + * Do not signal error, but do not create input nor + * backlight devices either, let userspace figure this + * out (flash a new firmware?). + */ + return 0; + } + + if (device_id >= ARRAY_SIZE(ims_pcu_device_info) || + !ims_pcu_device_info[device_id].keymap) { + dev_err(pcu->dev, "Device ID %d is not valid\n", device_id); + /* Same as above, punt to userspace */ + return 0; + } + + /* Device appears to be operable, complete initialization */ + pcu->device_no = atomic_inc_return(&device_no) - 1; + + error = ims_pcu_setup_backlight(pcu); + if (error) + return error; + + info = &ims_pcu_device_info[device_id]; + error = ims_pcu_setup_buttons(pcu, info->keymap, info->keymap_len); + if (error) + goto err_destroy_backlight; + + if (info->has_gamepad) { + error = ims_pcu_setup_gamepad(pcu); + if (error) + goto err_destroy_buttons; + } + + pcu->setup_complete = true; + + return 0; + +err_destroy_backlight: + ims_pcu_destroy_backlight(pcu); +err_destroy_buttons: + ims_pcu_destroy_buttons(pcu); + return error; +} + +static void ims_pcu_destroy_application_mode(struct ims_pcu *pcu) +{ + if (pcu->setup_complete) { + pcu->setup_complete = false; + mb(); /* make sure flag setting is not reordered */ + + if (pcu->gamepad) + ims_pcu_destroy_gamepad(pcu); + ims_pcu_destroy_buttons(pcu); + ims_pcu_destroy_backlight(pcu); + } +} + +static int ims_pcu_init_bootloader_mode(struct ims_pcu *pcu) +{ + int error; + + error = ims_pcu_execute_bl_command(pcu, QUERY_DEVICE, NULL, 0, + IMS_PCU_CMD_RESPONSE_TIMEOUT); + if (error) { + dev_err(pcu->dev, "Bootloader does not respond, aborting\n"); + return error; + } + + pcu->fw_start_addr = + get_unaligned_le32(&pcu->cmd_buf[IMS_PCU_DATA_OFFSET + 11]); + pcu->fw_end_addr = + get_unaligned_le32(&pcu->cmd_buf[IMS_PCU_DATA_OFFSET + 15]); + + dev_info(pcu->dev, + "Device is in bootloader mode (addr 0x%08x-0x%08x), requesting firmware\n", + pcu->fw_start_addr, pcu->fw_end_addr); + + error = request_firmware_nowait(THIS_MODULE, true, + IMS_PCU_FIRMWARE_NAME, + pcu->dev, GFP_KERNEL, pcu, + ims_pcu_process_async_firmware); + if (error) { + /* This error is not fatal, let userspace have another chance */ + complete(&pcu->async_firmware_done); + } + + return 0; +} + +static void ims_pcu_destroy_bootloader_mode(struct ims_pcu *pcu) +{ + /* Make sure our initial firmware request has completed */ + wait_for_completion(&pcu->async_firmware_done); +} + +#define IMS_PCU_APPLICATION_MODE 0 +#define IMS_PCU_BOOTLOADER_MODE 1 + +static struct usb_driver ims_pcu_driver; + +static int ims_pcu_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct ims_pcu *pcu; + int error; + + pcu = kzalloc(sizeof(struct ims_pcu), GFP_KERNEL); + if (!pcu) + return -ENOMEM; + + pcu->dev = &intf->dev; + pcu->udev = udev; + pcu->bootloader_mode = id->driver_info == IMS_PCU_BOOTLOADER_MODE; + mutex_init(&pcu->cmd_mutex); + init_completion(&pcu->cmd_done); + init_completion(&pcu->async_firmware_done); + + error = ims_pcu_parse_cdc_data(intf, pcu); + if (error) + goto err_free_mem; + + error = usb_driver_claim_interface(&ims_pcu_driver, + pcu->data_intf, pcu); + if (error) { + dev_err(&intf->dev, + "Unable to claim corresponding data interface: %d\n", + error); + goto err_free_mem; + } + + usb_set_intfdata(pcu->ctrl_intf, pcu); + usb_set_intfdata(pcu->data_intf, pcu); + + error = ims_pcu_buffers_alloc(pcu); + if (error) + goto err_unclaim_intf; + + error = ims_pcu_start_io(pcu); + if (error) + goto err_free_buffers; + + error = ims_pcu_line_setup(pcu); + if (error) + goto err_stop_io; + + error = sysfs_create_group(&intf->dev.kobj, &ims_pcu_attr_group); + if (error) + goto err_stop_io; + + error = pcu->bootloader_mode ? + ims_pcu_init_bootloader_mode(pcu) : + ims_pcu_init_application_mode(pcu); + if (error) + goto err_remove_sysfs; + + return 0; + +err_remove_sysfs: + sysfs_remove_group(&intf->dev.kobj, &ims_pcu_attr_group); +err_stop_io: + ims_pcu_stop_io(pcu); +err_free_buffers: + ims_pcu_buffers_free(pcu); +err_unclaim_intf: + usb_driver_release_interface(&ims_pcu_driver, pcu->data_intf); +err_free_mem: + kfree(pcu); + return error; +} + +static void ims_pcu_disconnect(struct usb_interface *intf) +{ + struct ims_pcu *pcu = usb_get_intfdata(intf); + struct usb_host_interface *alt = intf->cur_altsetting; + + usb_set_intfdata(intf, NULL); + + /* + * See if we are dealing with control or data interface. The cleanup + * happens when we unbind primary (control) interface. + */ + if (alt->desc.bInterfaceClass != USB_CLASS_COMM) + return; + + sysfs_remove_group(&intf->dev.kobj, &ims_pcu_attr_group); + + ims_pcu_stop_io(pcu); + + if (pcu->bootloader_mode) + ims_pcu_destroy_bootloader_mode(pcu); + else + ims_pcu_destroy_application_mode(pcu); + + ims_pcu_buffers_free(pcu); + kfree(pcu); +} + +#ifdef CONFIG_PM +static int ims_pcu_suspend(struct usb_interface *intf, + pm_message_t message) +{ + struct ims_pcu *pcu = usb_get_intfdata(intf); + struct usb_host_interface *alt = intf->cur_altsetting; + + if (alt->desc.bInterfaceClass == USB_CLASS_COMM) + ims_pcu_stop_io(pcu); + + return 0; +} + +static int ims_pcu_resume(struct usb_interface *intf) +{ + struct ims_pcu *pcu = usb_get_intfdata(intf); + struct usb_host_interface *alt = intf->cur_altsetting; + int retval = 0; + + if (alt->desc.bInterfaceClass == USB_CLASS_COMM) { + retval = ims_pcu_start_io(pcu); + if (retval == 0) + retval = ims_pcu_line_setup(pcu); + } + + return retval; +} +#endif + +static const struct usb_device_id ims_pcu_id_table[] = { + { + USB_DEVICE_AND_INTERFACE_INFO(0x04d8, 0x0082, + USB_CLASS_COMM, + USB_CDC_SUBCLASS_ACM, + USB_CDC_ACM_PROTO_AT_V25TER), + .driver_info = IMS_PCU_APPLICATION_MODE, + }, + { + USB_DEVICE_AND_INTERFACE_INFO(0x04d8, 0x0083, + USB_CLASS_COMM, + USB_CDC_SUBCLASS_ACM, + USB_CDC_ACM_PROTO_AT_V25TER), + .driver_info = IMS_PCU_BOOTLOADER_MODE, + }, + { } +}; + +static struct usb_driver ims_pcu_driver = { + .name = "ims_pcu", + .id_table = ims_pcu_id_table, + .probe = ims_pcu_probe, + .disconnect = ims_pcu_disconnect, +#ifdef CONFIG_PM + .suspend = ims_pcu_suspend, + .resume = ims_pcu_resume, + .reset_resume = ims_pcu_resume, +#endif +}; + +module_usb_driver(ims_pcu_driver); + +MODULE_DESCRIPTION("IMS Passenger Control Unit driver"); +MODULE_AUTHOR("Dmitry Torokhov "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From ba52a7fc434bea7c4a5d0ac7c10bf131f5ac60e2 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Sun, 17 Mar 2013 21:30:05 -0700 Subject: Input: tegra-kbc - convert to devm_ioremap_resource() Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages; so all explicit error messages can be removed from the failure code paths. Signed-off-by: Sachin Kamat Reviewed-by: Thierry Reding Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/tegra-kbc.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c index 0e138ebcc768..68b2b65024d6 100644 --- a/drivers/input/keyboard/tegra-kbc.c +++ b/drivers/input/keyboard/tegra-kbc.c @@ -31,6 +31,7 @@ #include #include #include +#include #define KBC_MAX_GPIO 24 #define KBC_MAX_KPENT 8 @@ -608,11 +609,9 @@ static int tegra_kbc_probe(struct platform_device *pdev) setup_timer(&kbc->timer, tegra_kbc_keypress_timer, (unsigned long)kbc); - kbc->mmio = devm_request_and_ioremap(&pdev->dev, res); - if (!kbc->mmio) { - dev_err(&pdev->dev, "Cannot request memregion/iomap address\n"); - return -EBUSY; - } + kbc->mmio = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(kbc->mmio)) + return PTR_ERR(kbc->mmio); kbc->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(kbc->clk)) { -- cgit v1.2.3 From 6b0bc60b8b87be28f00dc71e624bd693d830bf74 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Sun, 17 Mar 2013 21:26:22 -0700 Subject: Input: davinci_keyscan - use module_platform_driver_probe macro module_platform_driver_probe() simplifies the code by eliminating boilerplate code. Signed-off-by: Sachin Kamat Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/davinci_keyscan.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/keyboard/davinci_keyscan.c b/drivers/input/keyboard/davinci_keyscan.c index 4e4e453ea15e..829753702b62 100644 --- a/drivers/input/keyboard/davinci_keyscan.c +++ b/drivers/input/keyboard/davinci_keyscan.c @@ -329,17 +329,7 @@ static struct platform_driver davinci_ks_driver = { .remove = davinci_ks_remove, }; -static int __init davinci_ks_init(void) -{ - return platform_driver_probe(&davinci_ks_driver, davinci_ks_probe); -} -module_init(davinci_ks_init); - -static void __exit davinci_ks_exit(void) -{ - platform_driver_unregister(&davinci_ks_driver); -} -module_exit(davinci_ks_exit); +module_platform_driver_probe(davinci_ks_driver, davinci_ks_probe); MODULE_AUTHOR("Miguel Aguilar"); MODULE_DESCRIPTION("Texas Instruments DaVinci Key Scan Driver"); -- cgit v1.2.3 From 8c0aafe07721a3807f08d2a30abc1b04f01aa48b Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Sun, 17 Mar 2013 21:26:44 -0700 Subject: Input: twl4030-pwrbutton - use module_platform_driver_probe macro module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat Signed-off-by: Dmitry Torokhov --- drivers/input/misc/twl4030-pwrbutton.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c index 27c2bc8aa890..b9a05fda03e4 100644 --- a/drivers/input/misc/twl4030-pwrbutton.c +++ b/drivers/input/misc/twl4030-pwrbutton.c @@ -114,18 +114,8 @@ static struct platform_driver twl4030_pwrbutton_driver = { }, }; -static int __init twl4030_pwrbutton_init(void) -{ - return platform_driver_probe(&twl4030_pwrbutton_driver, +module_platform_driver_probe(twl4030_pwrbutton_driver, twl4030_pwrbutton_probe); -} -module_init(twl4030_pwrbutton_init); - -static void __exit twl4030_pwrbutton_exit(void) -{ - platform_driver_unregister(&twl4030_pwrbutton_driver); -} -module_exit(twl4030_pwrbutton_exit); MODULE_ALIAS("platform:twl4030_pwrbutton"); MODULE_DESCRIPTION("Triton2 Power Button"); -- cgit v1.2.3 From e67d541ff2574ea30b046642217ac3ed98826e13 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Sun, 17 Mar 2013 21:27:11 -0700 Subject: Input: amikbd - use module_platform_driver_probe macro module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/amikbd.c | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/keyboard/amikbd.c b/drivers/input/keyboard/amikbd.c index 79172af164f2..ba0b36f7daea 100644 --- a/drivers/input/keyboard/amikbd.c +++ b/drivers/input/keyboard/amikbd.c @@ -260,18 +260,6 @@ static struct platform_driver amikbd_driver = { }, }; -static int __init amikbd_init(void) -{ - return platform_driver_probe(&amikbd_driver, amikbd_probe); -} - -module_init(amikbd_init); - -static void __exit amikbd_exit(void) -{ - platform_driver_unregister(&amikbd_driver); -} - -module_exit(amikbd_exit); +module_platform_driver_probe(amikbd_driver, amikbd_probe); MODULE_ALIAS("platform:amiga-keyboard"); -- cgit v1.2.3 From 0442ce1cff6597ac36003342d31565f7358e75df Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Sun, 17 Mar 2013 21:27:41 -0700 Subject: Input: nomadik-ske-keypad - use module_platform_driver_probe macro module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat Acked-by: Linus Walleij Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/nomadik-ske-keypad.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/keyboard/nomadik-ske-keypad.c b/drivers/input/keyboard/nomadik-ske-keypad.c index 0e6a8151fee3..c7d505cce72f 100644 --- a/drivers/input/keyboard/nomadik-ske-keypad.c +++ b/drivers/input/keyboard/nomadik-ske-keypad.c @@ -430,17 +430,7 @@ static struct platform_driver ske_keypad_driver = { .remove = ske_keypad_remove, }; -static int __init ske_keypad_init(void) -{ - return platform_driver_probe(&ske_keypad_driver, ske_keypad_probe); -} -module_init(ske_keypad_init); - -static void __exit ske_keypad_exit(void) -{ - platform_driver_unregister(&ske_keypad_driver); -} -module_exit(ske_keypad_exit); +module_platform_driver_probe(ske_keypad_driver, ske_keypad_probe); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Naveen Kumar / Sundar Iyer "); -- cgit v1.2.3 From e492fe2751dbb14e1a24f888e9b174bc9bafee21 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Sun, 17 Mar 2013 21:28:00 -0700 Subject: Input: amimouse - use module_platform_driver_probe macro module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/amimouse.c | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/mouse/amimouse.c b/drivers/input/mouse/amimouse.c index 5fa99341a39d..b55d5af217a7 100644 --- a/drivers/input/mouse/amimouse.c +++ b/drivers/input/mouse/amimouse.c @@ -146,18 +146,6 @@ static struct platform_driver amimouse_driver = { }, }; -static int __init amimouse_init(void) -{ - return platform_driver_probe(&amimouse_driver, amimouse_probe); -} - -module_init(amimouse_init); - -static void __exit amimouse_exit(void) -{ - platform_driver_unregister(&amimouse_driver); -} - -module_exit(amimouse_exit); +module_platform_driver_probe(amimouse_driver, amimouse_probe); MODULE_ALIAS("platform:amiga-mouse"); -- cgit v1.2.3 From 9e984cdd171c0feaaf81af1f35c15439c7798bb8 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Sun, 17 Mar 2013 21:28:14 -0700 Subject: Input: at32psif - use module_platform_driver_probe macro module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat Signed-off-by: Dmitry Torokhov --- drivers/input/serio/at32psif.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/serio/at32psif.c b/drivers/input/serio/at32psif.c index 36e799c31f5e..190ce35af7df 100644 --- a/drivers/input/serio/at32psif.c +++ b/drivers/input/serio/at32psif.c @@ -359,18 +359,7 @@ static struct platform_driver psif_driver = { }, }; -static int __init psif_init(void) -{ - return platform_driver_probe(&psif_driver, psif_probe); -} - -static void __exit psif_exit(void) -{ - platform_driver_unregister(&psif_driver); -} - -module_init(psif_init); -module_exit(psif_exit); +module_platform_driver_probe(psif_driver, psif_probe); MODULE_AUTHOR("Hans-Christian Egtvedt "); MODULE_DESCRIPTION("Atmel AVR32 PSIF PS/2 driver"); -- cgit v1.2.3 From 07beda4f6d449e045baa776ee3f31979e37d6c64 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Sun, 17 Mar 2013 21:28:28 -0700 Subject: Input: q40kbd - use module_platform_driver_probe macro module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat Signed-off-by: Dmitry Torokhov --- drivers/input/serio/q40kbd.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/serio/q40kbd.c b/drivers/input/serio/q40kbd.c index 70fe542839fb..436a3433f8e5 100644 --- a/drivers/input/serio/q40kbd.c +++ b/drivers/input/serio/q40kbd.c @@ -193,15 +193,4 @@ static struct platform_driver q40kbd_driver = { .remove = q40kbd_remove, }; -static int __init q40kbd_init(void) -{ - return platform_driver_probe(&q40kbd_driver, q40kbd_probe); -} - -static void __exit q40kbd_exit(void) -{ - platform_driver_unregister(&q40kbd_driver); -} - -module_init(q40kbd_init); -module_exit(q40kbd_exit); +module_platform_driver_probe(q40kbd_driver, q40kbd_probe); -- cgit v1.2.3 From 8698a9382603faf64f045445b90f768522af28da Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Sun, 17 Mar 2013 21:29:07 -0700 Subject: Input: atmel-wm97xx - use module_platform_driver_probe macro module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/atmel-wm97xx.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/atmel-wm97xx.c b/drivers/input/touchscreen/atmel-wm97xx.c index c5c2dbb93869..2c1e46b7e45b 100644 --- a/drivers/input/touchscreen/atmel-wm97xx.c +++ b/drivers/input/touchscreen/atmel-wm97xx.c @@ -432,17 +432,7 @@ static struct platform_driver atmel_wm97xx_driver = { }, }; -static int __init atmel_wm97xx_init(void) -{ - return platform_driver_probe(&atmel_wm97xx_driver, atmel_wm97xx_probe); -} -module_init(atmel_wm97xx_init); - -static void __exit atmel_wm97xx_exit(void) -{ - platform_driver_unregister(&atmel_wm97xx_driver); -} -module_exit(atmel_wm97xx_exit); +module_platform_driver_probe(atmel_wm97xx_driver, atmel_wm97xx_probe); MODULE_AUTHOR("Hans-Christian Egtvedt "); MODULE_DESCRIPTION("wm97xx continuous touch driver for Atmel AT91 and AVR32"); -- cgit v1.2.3 From 38a46eb8cc0faec0345c27083fb26d1e7e02ccff Mon Sep 17 00:00:00 2001 From: Fabio Porcedda Date: Sun, 17 Mar 2013 21:31:03 -0700 Subject: Input: mc13783_ts - use module_platform_driver_probe() This patch converts the drivers to use the module_platform_driver_probe() macro which makes the code smaller and a bit simpler. Signed-off-by: Fabio Porcedda Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/mc13783_ts.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/mc13783_ts.c b/drivers/input/touchscreen/mc13783_ts.c index 02103b6abb39..89308fe38752 100644 --- a/drivers/input/touchscreen/mc13783_ts.c +++ b/drivers/input/touchscreen/mc13783_ts.c @@ -250,17 +250,7 @@ static struct platform_driver mc13783_ts_driver = { }, }; -static int __init mc13783_ts_init(void) -{ - return platform_driver_probe(&mc13783_ts_driver, &mc13783_ts_probe); -} -module_init(mc13783_ts_init); - -static void __exit mc13783_ts_exit(void) -{ - platform_driver_unregister(&mc13783_ts_driver); -} -module_exit(mc13783_ts_exit); +module_platform_driver_probe(mc13783_ts_driver, mc13783_ts_probe); MODULE_DESCRIPTION("MC13783 input touchscreen driver"); MODULE_AUTHOR("Sascha Hauer "); -- cgit v1.2.3 From 2b1c0d506d04aa084a88f21600888d99ce469d29 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 26 Mar 2013 21:38:47 -0700 Subject: Input: adxl34x - add CONFIG_PM_SLEEP to suspend/resume functions Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/input/misc/adxl34x-spi.c:98:12: warning: 'adxl34x_spi_suspend' defined but not used [-Wunused-function] drivers/input/misc/adxl34x-spi.c:108:12: warning: 'adxl34x_spi_resume' defined but not used [-Wunused-function] drivers/input/misc/adxl34x-i2c.c:109:12: warning: 'adxl34x_i2c_suspend' defined but not used [-Wunused-function] drivers/input/misc/adxl34x-i2c.c:119:12: warning: 'adxl34x_i2c_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han Signed-off-by: Dmitry Torokhov --- drivers/input/misc/adxl34x-i2c.c | 2 +- drivers/input/misc/adxl34x-spi.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/misc/adxl34x-i2c.c b/drivers/input/misc/adxl34x-i2c.c index 535dda48cace..416f47ddcc90 100644 --- a/drivers/input/misc/adxl34x-i2c.c +++ b/drivers/input/misc/adxl34x-i2c.c @@ -105,7 +105,7 @@ static int adxl34x_i2c_remove(struct i2c_client *client) return adxl34x_remove(ac); } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int adxl34x_i2c_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); diff --git a/drivers/input/misc/adxl34x-spi.c b/drivers/input/misc/adxl34x-spi.c index ad5f40d37e48..990b49e712e1 100644 --- a/drivers/input/misc/adxl34x-spi.c +++ b/drivers/input/misc/adxl34x-spi.c @@ -94,7 +94,7 @@ static int adxl34x_spi_remove(struct spi_device *spi) return adxl34x_remove(ac); } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int adxl34x_spi_suspend(struct device *dev) { struct spi_device *spi = to_spi_device(dev); -- cgit v1.2.3 From 84c0c9f56ac7ce8036c0a70383dba1789138e859 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 26 Mar 2013 21:38:52 -0700 Subject: Input: ad714x - add CONFIG_PM_SLEEP to suspend/resume functions Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/input/misc/ad714x-i2c.c:17:12: warning: 'ad714x_i2c_suspend' defined but not used [-Wunused-function] drivers/input/misc/ad714x-i2c.c:22:12: warning: 'ad714x_i2c_resume' defined but not used [-Wunused-function] drivers/input/misc/ad714x-spi.c:20:12: warning: 'ad714x_spi_suspend' defined but not used [-Wunused-function] drivers/input/misc/ad714x-spi.c:25:12: warning: 'ad714x_spi_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han Signed-off-by: Dmitry Torokhov --- drivers/input/misc/ad714x-i2c.c | 2 +- drivers/input/misc/ad714x-spi.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/misc/ad714x-i2c.c b/drivers/input/misc/ad714x-i2c.c index 29d2064c26f2..e0f522516ef5 100644 --- a/drivers/input/misc/ad714x-i2c.c +++ b/drivers/input/misc/ad714x-i2c.c @@ -13,7 +13,7 @@ #include #include "ad714x.h" -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int ad714x_i2c_suspend(struct device *dev) { return ad714x_disable(i2c_get_clientdata(to_i2c_client(dev))); diff --git a/drivers/input/misc/ad714x-spi.c b/drivers/input/misc/ad714x-spi.c index bdccca42d138..61891486067c 100644 --- a/drivers/input/misc/ad714x-spi.c +++ b/drivers/input/misc/ad714x-spi.c @@ -16,7 +16,7 @@ #define AD714x_SPI_CMD_PREFIX 0xE000 /* bits 15:11 */ #define AD714x_SPI_READ BIT(10) -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int ad714x_spi_suspend(struct device *dev) { return ad714x_disable(spi_get_drvdata(to_spi_device(dev))); -- cgit v1.2.3 From 8efcc503231dd50800f874725961dfdae5f08f52 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Thu, 28 Mar 2013 01:14:42 -0700 Subject: Input: edt-ft5x06 - remove redundant null check before kfree kfree on a null pointer is a no-op. Hence null check is not necessary. Signed-off-by: Sachin Kamat Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/edt-ft5x06.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index a9170157b442..83fa1b15a97f 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -440,8 +440,7 @@ static int edt_ft5x06_work_mode(struct edt_ft5x06_ts_data *tsdata) return -EIO; } - if (tsdata->raw_buffer) - kfree(tsdata->raw_buffer); + kfree(tsdata->raw_buffer); tsdata->raw_buffer = NULL; /* restore parameters */ -- cgit v1.2.3 From 80e3e5328a9978fae3654ead657e9df653508713 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Thu, 28 Mar 2013 01:14:46 -0700 Subject: Input: eeti_ts - remove redundant null check 'pdata' is already dereferenced earlier. Hence this check is meaningless. Signed-off-by: Sachin Kamat Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/eeti_ts.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c index 55255a940072..8fe5086c8d2e 100644 --- a/drivers/input/touchscreen/eeti_ts.c +++ b/drivers/input/touchscreen/eeti_ts.c @@ -206,8 +206,7 @@ static int eeti_ts_probe(struct i2c_client *client, if (err < 0) goto err1; - if (pdata) - priv->irq_active_high = pdata->irq_active_high; + priv->irq_active_high = pdata->irq_active_high; irq_flags = priv->irq_active_high ? IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING; -- cgit v1.2.3 From 257a1ec603538036a2f2ae7e8433d775b7a7588a Mon Sep 17 00:00:00 2001 From: Sebastien Royen Date: Sun, 31 Mar 2013 00:24:13 -0700 Subject: Input: mma8450 - fix signed 12bits to 32bits conversion Event value is wrong. Should be in range -2048 to 2047, but is in range 0 to 4095. Use s8 to int conversion and remove 0xfff mask. Signed-off-by: Sebastien Royen Signed-off-by: Dmitry Torokhov --- drivers/input/misc/mma8450.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/misc/mma8450.c b/drivers/input/misc/mma8450.c index 480557f14f23..f3309696d053 100644 --- a/drivers/input/misc/mma8450.c +++ b/drivers/input/misc/mma8450.c @@ -123,9 +123,9 @@ static void mma8450_poll(struct input_polled_dev *dev) if (ret < 0) return; - x = ((buf[1] << 4) & 0xff0) | (buf[0] & 0xf); - y = ((buf[3] << 4) & 0xff0) | (buf[2] & 0xf); - z = ((buf[5] << 4) & 0xff0) | (buf[4] & 0xf); + x = ((int)(s8)buf[1] << 4) | (buf[0] & 0xf); + y = ((int)(s8)buf[3] << 4) | (buf[2] & 0xf); + z = ((int)(s8)buf[5] << 4) | (buf[4] & 0xf); input_report_abs(dev->input, ABS_X, x); input_report_abs(dev->input, ABS_Y, y); -- cgit v1.2.3 From 2c0a4f8b870dbeb48e3351899bd0e0cc886d4985 Mon Sep 17 00:00:00 2001 From: Mischa Jonker Date: Sun, 31 Mar 2013 00:25:33 -0700 Subject: Input: arc_ps2 - add support for device tree Add match table for device tree binding and dts binding doc. Signed-off-by: Mischa Jonker Signed-off-by: Dmitry Torokhov --- Documentation/devicetree/bindings/serio/snps-arc_ps2.txt | 16 ++++++++++++++++ drivers/input/serio/arc_ps2.c | 14 ++++++++++++-- 2 files changed, 28 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/serio/snps-arc_ps2.txt (limited to 'drivers/input') diff --git a/Documentation/devicetree/bindings/serio/snps-arc_ps2.txt b/Documentation/devicetree/bindings/serio/snps-arc_ps2.txt new file mode 100644 index 000000000000..38c2f21e8044 --- /dev/null +++ b/Documentation/devicetree/bindings/serio/snps-arc_ps2.txt @@ -0,0 +1,16 @@ +* ARC PS/2 driver: PS/2 block used in some ARC FPGA's & nSIM OSCI model + +Required properties: +- compatible : "snps,arc_ps2" +- reg : offset and length (always 0x14) of registers +- interrupts : interrupt +- interrupt-names : name of interrupt, must be "arc_ps2_irq" + +Example: + +serio@c9000400 { + compatible = "snps,arc_ps2"; + reg = <0xc9000400 0x14>; + interrupts = <13>; + interrupt-names = "arc_ps2_irq"; +} diff --git a/drivers/input/serio/arc_ps2.c b/drivers/input/serio/arc_ps2.c index c52e3e589f72..3fb7727c8ea5 100644 --- a/drivers/input/serio/arc_ps2.c +++ b/drivers/input/serio/arc_ps2.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -259,10 +260,19 @@ static int arc_ps2_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_OF +static const struct of_device_id arc_ps2_match[] = { + { .compatible = "snps,arc_ps2" }, + { }, +}; +MODULE_DEVICE_TABLE(of, arc_ps2_match); +#endif + static struct platform_driver arc_ps2_driver = { .driver = { - .name = "arc_ps2", - .owner = THIS_MODULE, + .name = "arc_ps2", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(arc_ps2_match), }, .probe = arc_ps2_probe, .remove = arc_ps2_remove, -- cgit v1.2.3 From da5bce199fa9209c462259125f9a0144adf6885c Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 31 Mar 2013 00:38:21 -0700 Subject: Input: imx_keypad - switch to using managed resources Using devm_ functions can make the code cleaner and simpler. Signed-off-by: Fabio Estevam Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/imx_keypad.c | 77 +++++++------------------------------ 1 file changed, 14 insertions(+), 63 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c index 98f9113251d2..03c8cc5cb6c1 100644 --- a/drivers/input/keyboard/imx_keypad.c +++ b/drivers/input/keyboard/imx_keypad.c @@ -448,24 +448,17 @@ static int imx_keypad_probe(struct platform_device *pdev) return -EINVAL; } - res = request_mem_region(res->start, resource_size(res), pdev->name); - if (res == NULL) { - dev_err(&pdev->dev, "failed to request I/O memory\n"); - return -EBUSY; - } - - input_dev = input_allocate_device(); + input_dev = devm_input_allocate_device(&pdev->dev); if (!input_dev) { dev_err(&pdev->dev, "failed to allocate the input device\n"); - error = -ENOMEM; - goto failed_rel_mem; + return -ENOMEM; } - keypad = kzalloc(sizeof(struct imx_keypad), GFP_KERNEL); + keypad = devm_kzalloc(&pdev->dev, sizeof(struct imx_keypad), + GFP_KERNEL); if (!keypad) { dev_err(&pdev->dev, "not enough memory for driver data\n"); - error = -ENOMEM; - goto failed_free_input; + return -ENOMEM; } keypad->input_dev = input_dev; @@ -475,18 +468,14 @@ static int imx_keypad_probe(struct platform_device *pdev) setup_timer(&keypad->check_matrix_timer, imx_keypad_check_for_events, (unsigned long) keypad); - keypad->mmio_base = ioremap(res->start, resource_size(res)); - if (keypad->mmio_base == NULL) { - dev_err(&pdev->dev, "failed to remap I/O memory\n"); - error = -ENOMEM; - goto failed_free_priv; - } + keypad->mmio_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(keypad->mmio_base)) + return PTR_ERR(keypad->mmio_base); - keypad->clk = clk_get(&pdev->dev, NULL); + keypad->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(keypad->clk)) { dev_err(&pdev->dev, "failed to get keypad clock\n"); - error = PTR_ERR(keypad->clk); - goto failed_unmap; + return PTR_ERR(keypad->clk); } /* Init the Input device */ @@ -502,7 +491,7 @@ static int imx_keypad_probe(struct platform_device *pdev) keypad->keycodes, input_dev); if (error) { dev_err(&pdev->dev, "failed to build keymap\n"); - goto failed_clock_put; + return error; } /* Search for rows and cols enabled */ @@ -527,60 +516,23 @@ static int imx_keypad_probe(struct platform_device *pdev) imx_keypad_inhibit(keypad); clk_disable_unprepare(keypad->clk); - error = request_irq(irq, imx_keypad_irq_handler, 0, + error = devm_request_irq(&pdev->dev, irq, imx_keypad_irq_handler, 0, pdev->name, keypad); if (error) { dev_err(&pdev->dev, "failed to request IRQ\n"); - goto failed_clock_put; + return error; } /* Register the input device */ error = input_register_device(input_dev); if (error) { dev_err(&pdev->dev, "failed to register input device\n"); - goto failed_free_irq; + return error; } platform_set_drvdata(pdev, keypad); device_init_wakeup(&pdev->dev, 1); - return 0; - -failed_free_irq: - free_irq(irq, pdev); -failed_clock_put: - clk_put(keypad->clk); -failed_unmap: - iounmap(keypad->mmio_base); -failed_free_priv: - kfree(keypad); -failed_free_input: - input_free_device(input_dev); -failed_rel_mem: - release_mem_region(res->start, resource_size(res)); - return error; -} - -static int imx_keypad_remove(struct platform_device *pdev) -{ - struct imx_keypad *keypad = platform_get_drvdata(pdev); - struct resource *res; - - dev_dbg(&pdev->dev, ">%s\n", __func__); - - platform_set_drvdata(pdev, NULL); - - input_unregister_device(keypad->input_dev); - - free_irq(keypad->irq, keypad); - clk_put(keypad->clk); - - iounmap(keypad->mmio_base); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, resource_size(res)); - - kfree(keypad); - return 0; } @@ -640,7 +592,6 @@ static struct platform_driver imx_keypad_driver = { .of_match_table = of_match_ptr(imx_keypad_of_match), }, .probe = imx_keypad_probe, - .remove = imx_keypad_remove, }; module_platform_driver(imx_keypad_driver); -- cgit v1.2.3 From e10af9e79a97ac5d305ec1be94338e8d3fd7aaa4 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Sun, 31 Mar 2013 00:41:12 -0700 Subject: Input: tegra-kbc - support for defining row/columns based on SoC NVIDIA's Tegra20 and Tegra30 supports the 16x8 keyboard matrix and T114 support the 11x8 Key matrix. Add support for defining the maximum row/columns based on SoC through proper compatibility. Signed-off-by: Laxman Dewangan Reviewed-by: Stephen Warren Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/tegra-kbc.c | 80 +++++++++++++++++++++++++++++--------- 1 file changed, 62 insertions(+), 18 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c index 68b2b65024d6..b46142f78ef2 100644 --- a/drivers/input/keyboard/tegra-kbc.c +++ b/drivers/input/keyboard/tegra-kbc.c @@ -27,18 +27,19 @@ #include #include #include +#include #include #include #include #include #include -#define KBC_MAX_GPIO 24 #define KBC_MAX_KPENT 8 -#define KBC_MAX_ROW 16 -#define KBC_MAX_COL 8 -#define KBC_MAX_KEY (KBC_MAX_ROW * KBC_MAX_COL) +/* Maximum row/column supported by Tegra KBC yet is 16x8 */ +#define KBC_MAX_GPIO 24 +/* Maximum keys supported by Tegra KBC yet is 16 x 8*/ +#define KBC_MAX_KEY (16 * 8) #define KBC_MAX_DEBOUNCE_CNT 0x3ffu @@ -81,6 +82,12 @@ enum tegra_pin_type { PIN_CFG_ROW, }; +/* Tegra KBC hw support */ +struct tegra_kbc_hw_support { + int max_rows; + int max_columns; +}; + struct tegra_kbc_pin_cfg { enum tegra_pin_type type; unsigned char num; @@ -109,6 +116,9 @@ struct tegra_kbc { u32 wakeup_key; struct timer_list timer; struct clk *clk; + const struct tegra_kbc_hw_support *hw_support; + int max_keys; + int num_rows_and_columns; }; static void tegra_kbc_report_released_keys(struct input_dev *input, @@ -205,11 +215,11 @@ static void tegra_kbc_report_keys(struct tegra_kbc *kbc) /* * If the platform uses Fn keymaps, translate keys on a Fn keypress. - * Function keycodes are KBC_MAX_KEY apart from the plain keycodes. + * Function keycodes are max_keys apart from the plain keycodes. */ if (fn_keypress) { for (i = 0; i < num_down; i++) { - scancodes[i] += KBC_MAX_KEY; + scancodes[i] += kbc->max_keys; keycodes[i] = kbc->keycode[scancodes[i]]; } } @@ -316,7 +326,7 @@ static void tegra_kbc_setup_wakekeys(struct tegra_kbc *kbc, bool filter) /* Either mask all keys or none. */ rst_val = (filter && !kbc->wakeup) ? ~0 : 0; - for (i = 0; i < KBC_MAX_ROW; i++) + for (i = 0; i < kbc->hw_support->max_rows; i++) writel(rst_val, kbc->mmio + KBC_ROW0_MASK_0 + i * 4); } @@ -453,7 +463,7 @@ static bool tegra_kbc_check_pin_cfg(const struct tegra_kbc *kbc, switch (pin_cfg->type) { case PIN_CFG_ROW: - if (pin_cfg->num >= KBC_MAX_ROW) { + if (pin_cfg->num >= kbc->hw_support->max_rows) { dev_err(kbc->dev, "pin_cfg[%d]: invalid row number %d\n", i, pin_cfg->num); @@ -463,7 +473,7 @@ static bool tegra_kbc_check_pin_cfg(const struct tegra_kbc *kbc, break; case PIN_CFG_COL: - if (pin_cfg->num >= KBC_MAX_COL) { + if (pin_cfg->num >= kbc->hw_support->max_columns) { dev_err(kbc->dev, "pin_cfg[%d]: invalid column number %d\n", i, pin_cfg->num); @@ -521,6 +531,18 @@ static int tegra_kbc_parse_dt(struct tegra_kbc *kbc) } num_cols = proplen / sizeof(u32); + if (num_rows > kbc->hw_support->max_rows) { + dev_err(kbc->dev, + "Number of rows is more than supported by hardware\n"); + return -EINVAL; + } + + if (num_cols > kbc->hw_support->max_columns) { + dev_err(kbc->dev, + "Number of cols is more than supported by hardware\n"); + return -EINVAL; + } + if (!of_get_property(np, "linux,keymap", &proplen)) { dev_err(kbc->dev, "property linux,keymap not found\n"); return -ENOENT; @@ -533,7 +555,7 @@ static int tegra_kbc_parse_dt(struct tegra_kbc *kbc) } /* Set all pins as non-configured */ - for (i = 0; i < KBC_MAX_GPIO; i++) + for (i = 0; i < kbc->num_rows_and_columns; i++) kbc->pin_cfg[i].type = PIN_CFG_IGNORE; ret = of_property_read_u32_array(np, "nvidia,kbc-row-pins", @@ -563,6 +585,24 @@ static int tegra_kbc_parse_dt(struct tegra_kbc *kbc) return 0; } +static const struct tegra_kbc_hw_support tegra20_kbc_hw_support = { + .max_rows = 16, + .max_columns = 8, +}; + +static const struct tegra_kbc_hw_support tegra11_kbc_hw_support = { + .max_rows = 11, + .max_columns = 8, +}; + +static const struct of_device_id tegra_kbc_of_match[] = { + { .compatible = "nvidia,tegra114-kbc", .data = &tegra11_kbc_hw_support}, + { .compatible = "nvidia,tegra30-kbc", .data = &tegra20_kbc_hw_support}, + { .compatible = "nvidia,tegra20-kbc", .data = &tegra20_kbc_hw_support}, + { }, +}; +MODULE_DEVICE_TABLE(of, tegra_kbc_of_match); + static int tegra_kbc_probe(struct platform_device *pdev) { struct tegra_kbc *kbc; @@ -571,7 +611,10 @@ static int tegra_kbc_probe(struct platform_device *pdev) int num_rows = 0; unsigned int debounce_cnt; unsigned int scan_time_rows; - unsigned int keymap_rows = KBC_MAX_KEY; + unsigned int keymap_rows; + const struct of_device_id *match; + + match = of_match_device(of_match_ptr(tegra_kbc_of_match), &pdev->dev); kbc = devm_kzalloc(&pdev->dev, sizeof(*kbc), GFP_KERNEL); if (!kbc) { @@ -580,6 +623,12 @@ static int tegra_kbc_probe(struct platform_device *pdev) } kbc->dev = &pdev->dev; + kbc->hw_support = match->data; + kbc->max_keys = kbc->hw_support->max_rows * + kbc->hw_support->max_columns; + kbc->num_rows_and_columns = kbc->hw_support->max_rows + + kbc->hw_support->max_columns; + keymap_rows = kbc->max_keys; spin_lock_init(&kbc->lock); err = tegra_kbc_parse_dt(kbc); @@ -640,7 +689,8 @@ static int tegra_kbc_probe(struct platform_device *pdev) keymap_rows *= 2; err = matrix_keypad_build_keymap(kbc->keymap_data, NULL, - keymap_rows, KBC_MAX_COL, + keymap_rows, + kbc->hw_support->max_columns, kbc->keycode, kbc->idev); if (err) { dev_err(&pdev->dev, "failed to setup keymap\n"); @@ -766,12 +816,6 @@ static int tegra_kbc_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(tegra_kbc_pm_ops, tegra_kbc_suspend, tegra_kbc_resume); -static const struct of_device_id tegra_kbc_of_match[] = { - { .compatible = "nvidia,tegra20-kbc", }, - { }, -}; -MODULE_DEVICE_TABLE(of, tegra_kbc_of_match); - static struct platform_driver tegra_kbc_driver = { .probe = tegra_kbc_probe, .driver = { -- cgit v1.2.3 From 3c2b901003b4c152e19e6578c1705ce2c90edd4a Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 1 Apr 2013 01:09:15 -0700 Subject: Input: ims-pcu - fix a memory leak on error Reported-by: Dan Carpenter Signed-off-by: Dmitry Torokhov --- drivers/input/misc/ims-pcu.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/misc/ims-pcu.c b/drivers/input/misc/ims-pcu.c index 1b044b99da66..e204f26b0011 100644 --- a/drivers/input/misc/ims-pcu.c +++ b/drivers/input/misc/ims-pcu.c @@ -292,7 +292,8 @@ static int ims_pcu_setup_gamepad(struct ims_pcu *pcu) if (!gamepad || !input) { dev_err(pcu->dev, "Not enough memory for gamepad device\n"); - return -ENOMEM; + error = -ENOMEM; + goto err_free_mem; } gamepad->input = input; @@ -1156,7 +1157,7 @@ static ssize_t ims_pcu_update_firmware_store(struct device *dev, { struct usb_interface *intf = to_usb_interface(dev); struct ims_pcu *pcu = usb_get_intfdata(intf); - const struct firmware *fw; + const struct firmware *fw = NULL; int value; int error; -- cgit v1.2.3 From c12454fad579f3eae7260ed5c4346eeea4044ccb Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Sun, 7 Apr 2013 20:52:07 -0700 Subject: Input: ads7846 - use spi_get_drvdata() and spi_set_drvdata() Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/ads7846.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 434c3df250ca..84ccf140c1bb 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -1245,7 +1245,7 @@ static int ads7846_probe(struct spi_device *spi) goto err_free_mem; } - dev_set_drvdata(&spi->dev, ts); + spi_set_drvdata(spi, ts); ts->packet = packet; ts->spi = spi; @@ -1397,7 +1397,7 @@ static int ads7846_probe(struct spi_device *spi) static int ads7846_remove(struct spi_device *spi) { - struct ads7846 *ts = dev_get_drvdata(&spi->dev); + struct ads7846 *ts = spi_get_drvdata(spi); device_init_wakeup(&spi->dev, false); -- cgit v1.2.3 From e1793c69c82626717257285f437b0da7ad0d2e99 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Sun, 7 Apr 2013 20:52:12 -0700 Subject: Input: ad7877 - use spi_get_drvdata() and spi_set_drvdata() Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/ad7877.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c index 23fa829b869d..f3a174a83c82 100644 --- a/drivers/input/touchscreen/ad7877.c +++ b/drivers/input/touchscreen/ad7877.c @@ -273,7 +273,7 @@ static int ad7877_write(struct spi_device *spi, u16 reg, u16 val) static int ad7877_read_adc(struct spi_device *spi, unsigned command) { - struct ad7877 *ts = dev_get_drvdata(&spi->dev); + struct ad7877 *ts = spi_get_drvdata(spi); struct ser_req *req; int status; int sample; @@ -720,7 +720,7 @@ static int ad7877_probe(struct spi_device *spi) goto err_free_mem; } - dev_set_drvdata(&spi->dev, ts); + spi_set_drvdata(spi, ts); ts->spi = spi; ts->input = input_dev; @@ -806,13 +806,13 @@ err_free_irq: err_free_mem: input_free_device(input_dev); kfree(ts); - dev_set_drvdata(&spi->dev, NULL); + spi_set_drvdata(spi, NULL); return err; } static int ad7877_remove(struct spi_device *spi) { - struct ad7877 *ts = dev_get_drvdata(&spi->dev); + struct ad7877 *ts = spi_get_drvdata(spi); sysfs_remove_group(&spi->dev.kobj, &ad7877_attr_group); @@ -823,7 +823,7 @@ static int ad7877_remove(struct spi_device *spi) kfree(ts); dev_dbg(&spi->dev, "unregistered touchscreen\n"); - dev_set_drvdata(&spi->dev, NULL); + spi_set_drvdata(spi, NULL); return 0; } -- cgit v1.2.3 From 7a246777a694563c490811f9d398318652a3ffb4 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Sun, 7 Apr 2013 20:52:16 -0700 Subject: Input: adxl34x - use spi_get_drvdata() Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han Signed-off-by: Dmitry Torokhov --- drivers/input/misc/adxl34x-spi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/misc/adxl34x-spi.c b/drivers/input/misc/adxl34x-spi.c index 990b49e712e1..76dc0679d3b1 100644 --- a/drivers/input/misc/adxl34x-spi.c +++ b/drivers/input/misc/adxl34x-spi.c @@ -89,7 +89,7 @@ static int adxl34x_spi_probe(struct spi_device *spi) static int adxl34x_spi_remove(struct spi_device *spi) { - struct adxl34x *ac = dev_get_drvdata(&spi->dev); + struct adxl34x *ac = spi_get_drvdata(spi); return adxl34x_remove(ac); } @@ -98,7 +98,7 @@ static int adxl34x_spi_remove(struct spi_device *spi) static int adxl34x_spi_suspend(struct device *dev) { struct spi_device *spi = to_spi_device(dev); - struct adxl34x *ac = dev_get_drvdata(&spi->dev); + struct adxl34x *ac = spi_get_drvdata(spi); adxl34x_suspend(ac); @@ -108,7 +108,7 @@ static int adxl34x_spi_suspend(struct device *dev) static int adxl34x_spi_resume(struct device *dev) { struct spi_device *spi = to_spi_device(dev); - struct adxl34x *ac = dev_get_drvdata(&spi->dev); + struct adxl34x *ac = spi_get_drvdata(spi); adxl34x_resume(ac); -- cgit v1.2.3 From a0ef6a348a47bdb3896c468608f9cd19c1c26949 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Sun, 7 Apr 2013 20:52:22 -0700 Subject: Input: MT - handle semi-mt devices in core Most semi-mt drivers use the slots in a manual way, but really only need to treat the finger count manually. With this patch, a semi-mt driver may use the input-mt core for everything else. Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov --- drivers/input/input-mt.c | 8 +++++++- include/linux/input/mt.h | 1 + 2 files changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers/input') diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c index 71db1930573f..d398f1321f14 100644 --- a/drivers/input/input-mt.c +++ b/drivers/input/input-mt.c @@ -79,6 +79,8 @@ int input_mt_init_slots(struct input_dev *dev, unsigned int num_slots, } if (flags & INPUT_MT_DIRECT) __set_bit(INPUT_PROP_DIRECT, dev->propbit); + if (flags & INPUT_MT_SEMI_MT) + __set_bit(INPUT_PROP_SEMI_MT, dev->propbit); if (flags & INPUT_MT_TRACK) { unsigned int n2 = num_slots * num_slots; mt->red = kcalloc(n2, sizeof(*mt->red), GFP_KERNEL); @@ -246,6 +248,7 @@ void input_mt_sync_frame(struct input_dev *dev) { struct input_mt *mt = dev->mt; struct input_mt_slot *s; + bool use_count = false; if (!mt) return; @@ -259,7 +262,10 @@ void input_mt_sync_frame(struct input_dev *dev) } } - input_mt_report_pointer_emulation(dev, (mt->flags & INPUT_MT_POINTER)); + if ((mt->flags & INPUT_MT_POINTER) && !(mt->flags & INPUT_MT_SEMI_MT)) + use_count = true; + + input_mt_report_pointer_emulation(dev, use_count); mt->frame++; } diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h index 2e86bd0bfba1..1b1dfa80d9ff 100644 --- a/include/linux/input/mt.h +++ b/include/linux/input/mt.h @@ -19,6 +19,7 @@ #define INPUT_MT_DIRECT 0x0002 /* direct device, e.g. touchscreen */ #define INPUT_MT_DROP_UNUSED 0x0004 /* drop contacts not seen in frame */ #define INPUT_MT_TRACK 0x0008 /* use in-kernel tracking */ +#define INPUT_MT_SEMI_MT 0x0010 /* semi-mt device, finger count handled manually */ /** * struct input_mt_slot - represents the state of an input MT slot -- cgit v1.2.3 From 95b24d22135549ac8352d719a052002838bb9f80 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 15 Apr 2013 09:23:00 -0700 Subject: Input: st1232 - convert to devm_* infrastructure Use the devm_* managed functions to allocate resources. Signed-off-by: Laurent Pinchart Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/st1232.c | 34 ++++++++++++---------------------- 1 file changed, 12 insertions(+), 22 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c index d9d05e222428..75d8eb5ee609 100644 --- a/drivers/input/touchscreen/st1232.c +++ b/drivers/input/touchscreen/st1232.c @@ -156,13 +156,13 @@ static int st1232_ts_probe(struct i2c_client *client, return -EINVAL; } + ts = devm_kzalloc(&client->dev, sizeof(*ts), GFP_KERNEL); + if (!ts) + return -ENOMEM; - ts = kzalloc(sizeof(struct st1232_ts_data), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!ts || !input_dev) { - error = -ENOMEM; - goto err_free_mem; - } + input_dev = devm_input_allocate_device(&client->dev); + if (!input_dev) + return -ENOMEM; ts->client = client; ts->input_dev = input_dev; @@ -179,41 +179,31 @@ static int st1232_ts_probe(struct i2c_client *client, input_set_abs_params(input_dev, ABS_MT_POSITION_X, MIN_X, MAX_X, 0, 0); input_set_abs_params(input_dev, ABS_MT_POSITION_Y, MIN_Y, MAX_Y, 0, 0); - error = request_threaded_irq(client->irq, NULL, st1232_ts_irq_handler, - IRQF_ONESHOT, client->name, ts); + error = devm_request_threaded_irq(&client->dev, client->irq, + NULL, st1232_ts_irq_handler, + IRQF_ONESHOT, + client->name, ts); if (error) { dev_err(&client->dev, "Failed to register interrupt\n"); - goto err_free_mem; + return error; } error = input_register_device(ts->input_dev); if (error) { dev_err(&client->dev, "Unable to register %s input device\n", input_dev->name); - goto err_free_irq; + return error; } i2c_set_clientdata(client, ts); device_init_wakeup(&client->dev, 1); return 0; - -err_free_irq: - free_irq(client->irq, ts); -err_free_mem: - input_free_device(input_dev); - kfree(ts); - return error; } static int st1232_ts_remove(struct i2c_client *client) { - struct st1232_ts_data *ts = i2c_get_clientdata(client); - device_init_wakeup(&client->dev, 0); - free_irq(client->irq, ts); - input_unregister_device(ts->input_dev); - kfree(ts); return 0; } -- cgit v1.2.3 From e6a90810559cc3755a5b1629d1fd0b914462f98c Mon Sep 17 00:00:00 2001 From: Bastian Hecht Date: Mon, 15 Apr 2013 09:31:00 -0700 Subject: Input: st1232 - add reset pin handling We add the possibility to hand over a GPIO number for the reset pin. This way we can remove existing board code that takes care of it and group this information properly in the platform data or in the device tree configuration. Signed-off-by: Bastian Hecht Acked-by: Laurent Pinchart Signed-off-by: Dmitry Torokhov --- .../bindings/input/touchscreen/sitronix-st1232.txt | 24 +++++++++++ drivers/input/touchscreen/st1232.c | 47 ++++++++++++++++++++-- include/linux/platform_data/st1232_pdata.h | 13 ++++++ 3 files changed, 80 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt create mode 100644 include/linux/platform_data/st1232_pdata.h (limited to 'drivers/input') diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt new file mode 100644 index 000000000000..64ad48b824a2 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt @@ -0,0 +1,24 @@ +* Sitronix st1232 touchscreen controller + +Required properties: +- compatible: must be "sitronix,st1232" +- reg: I2C address of the chip +- interrupts: interrupt to which the chip is connected + +Optional properties: +- gpios: a phandle to the reset GPIO + +Example: + + i2c@00000000 { + /* ... */ + + touchscreen@55 { + compatible = "sitronix,st1232"; + reg = <0x55>; + interrupts = <2 0>; + gpios = <&gpio1 166 0>; + }; + + /* ... */ + }; diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c index 75d8eb5ee609..1740a2496371 100644 --- a/drivers/input/touchscreen/st1232.c +++ b/drivers/input/touchscreen/st1232.c @@ -19,13 +19,16 @@ */ #include +#include #include #include #include #include +#include #include #include #include +#include #define ST1232_TS_NAME "st1232-ts" @@ -48,6 +51,7 @@ struct st1232_ts_data { struct input_dev *input_dev; struct st1232_ts_finger finger[MAX_FINGERS]; struct dev_pm_qos_request low_latency_req; + int reset_gpio; }; static int st1232_ts_read_data(struct st1232_ts_data *ts) @@ -139,10 +143,17 @@ end: return IRQ_HANDLED; } +static void st1232_ts_power(struct st1232_ts_data *ts, bool poweron) +{ + if (gpio_is_valid(ts->reset_gpio)) + gpio_direction_output(ts->reset_gpio, poweron); +} + static int st1232_ts_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct st1232_ts_data *ts; + struct st1232_pdata *pdata = client->dev.platform_data; struct input_dev *input_dev; int error; @@ -167,6 +178,25 @@ static int st1232_ts_probe(struct i2c_client *client, ts->client = client; ts->input_dev = input_dev; + if (pdata) + ts->reset_gpio = pdata->reset_gpio; + else if (client->dev.of_node) + ts->reset_gpio = of_get_gpio(client->dev.of_node, 0); + else + ts->reset_gpio = -ENODEV; + + if (gpio_is_valid(ts->reset_gpio)) { + error = devm_gpio_request(&client->dev, ts->reset_gpio, NULL); + if (error) { + dev_err(&client->dev, + "Unable to request GPIO pin %d.\n", + ts->reset_gpio); + return error; + } + } + + st1232_ts_power(ts, true); + input_dev->name = "st1232-touchscreen"; input_dev->id.bustype = BUS_I2C; input_dev->dev.parent = &client->dev; @@ -203,7 +233,10 @@ static int st1232_ts_probe(struct i2c_client *client, static int st1232_ts_remove(struct i2c_client *client) { + struct st1232_ts_data *ts = i2c_get_clientdata(client); + device_init_wakeup(&client->dev, 0); + st1232_ts_power(ts, false); return 0; } @@ -212,11 +245,14 @@ static int st1232_ts_remove(struct i2c_client *client) static int st1232_ts_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); + struct st1232_ts_data *ts = i2c_get_clientdata(client); - if (device_may_wakeup(&client->dev)) + if (device_may_wakeup(&client->dev)) { enable_irq_wake(client->irq); - else + } else { disable_irq(client->irq); + st1232_ts_power(ts, false); + } return 0; } @@ -224,11 +260,14 @@ static int st1232_ts_suspend(struct device *dev) static int st1232_ts_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); + struct st1232_ts_data *ts = i2c_get_clientdata(client); - if (device_may_wakeup(&client->dev)) + if (device_may_wakeup(&client->dev)) { disable_irq_wake(client->irq); - else + } else { + st1232_ts_power(ts, true); enable_irq(client->irq); + } return 0; } diff --git a/include/linux/platform_data/st1232_pdata.h b/include/linux/platform_data/st1232_pdata.h new file mode 100644 index 000000000000..cac3e7b4c454 --- /dev/null +++ b/include/linux/platform_data/st1232_pdata.h @@ -0,0 +1,13 @@ +#ifndef _LINUX_ST1232_PDATA_H +#define _LINUX_ST1232_PDATA_H + +/* + * Optional platform data + * + * Use this if you want the driver to drive the reset pin. + */ +struct st1232_pdata { + int reset_gpio; +}; + +#endif -- cgit v1.2.3 From 39fbe5855737b2a2b8e097373951bbe1a4fdb345 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 14 Feb 2013 09:04:24 -0800 Subject: Input: ALPS - use %ph to print buffers This form is more concise. Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/alps.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 0238e0e14335..7c5d72a6a26a 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -1013,8 +1013,8 @@ static int alps_rpt_cmd(struct psmouse *psmouse, int init_command, if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) return -EIO; - psmouse_dbg(psmouse, "%2.2X report: %2.2x %2.2x %2.2x\n", - repeated_command, param[0], param[1], param[2]); + psmouse_dbg(psmouse, "%2.2X report: %3ph\n", + repeated_command, param); return 0; } @@ -1274,9 +1274,7 @@ static int alps_setup_trackstick_v3(struct psmouse *psmouse, int reg_base) psmouse_warn(psmouse, "trackstick E7 report failed\n"); ret = -ENODEV; } else { - psmouse_dbg(psmouse, - "trackstick E7 report: %2.2x %2.2x %2.2x\n", - param[0], param[1], param[2]); + psmouse_dbg(psmouse, "trackstick E7 report: %3ph\n", param); /* * Not sure what this does, but it is absolutely @@ -1323,6 +1321,7 @@ static int alps_hw_init_v3(struct psmouse *psmouse) reg_val = alps_probe_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE); if (reg_val == -EIO) goto error; + if (reg_val == 0 && alps_setup_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE) == -EIO) goto error; @@ -1676,8 +1675,7 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv) } psmouse_info(psmouse, - "Unknown ALPS touchpad: E7=%2.2x %2.2x %2.2x, EC=%2.2x %2.2x %2.2x\n", - e7[0], e7[1], e7[2], ec[0], ec[1], ec[2]); + "Unknown ALPS touchpad: E7=%3ph, EC=%3ph\n", e7, ec); return -EINVAL; } -- cgit v1.2.3 From e07a8943b809730220a4aff911d2bce6991828f1 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 15 Apr 2013 13:38:07 -0700 Subject: Input: apbps2 - convert to devm_ioremap_resource() Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages; so all explicit error messages can be removed from the failure code paths. Signed-off-by: Sachin Kamat Signed-off-by: Dmitry Torokhov --- drivers/input/serio/apbps2.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/serio/apbps2.c b/drivers/input/serio/apbps2.c index 2c14e6fa64c2..17e01a807ddc 100644 --- a/drivers/input/serio/apbps2.c +++ b/drivers/input/serio/apbps2.c @@ -147,11 +147,9 @@ static int apbps2_of_probe(struct platform_device *ofdev) /* Find Device Address */ res = platform_get_resource(ofdev, IORESOURCE_MEM, 0); - priv->regs = devm_request_and_ioremap(&ofdev->dev, res); - if (!priv->regs) { - dev_err(&ofdev->dev, "io-regs mapping failed\n"); - return -EBUSY; - } + priv->regs = devm_ioremap_resource(&ofdev->dev, res); + if (IS_ERR(priv->regs)) + return PTR_ERR(priv->regs); /* Reset hardware, disable interrupt */ iowrite32be(0, &priv->regs->ctrl); -- cgit v1.2.3 From 0c6a61657da78098472fd0eb71cc01f2387fa1bb Mon Sep 17 00:00:00 2001 From: Shawn Nematbakhsh Date: Mon, 15 Apr 2013 13:49:34 -0700 Subject: Input: trackpoint - Optimize trackpoint init to use power-on reset The trackpoint driver sets various parameter default values, all of which happen to be power-on defaults (Source: IBM TrackPoint Engineering Specification, Version 4.0. Also confirmed by empirical data). By sending the power-on reset command to reset all parameters to power-on state, we can skip the lengthy process of programming all parameters. In testing, ~2.5 secs of time writing parameters was reduced to .35 seconds waiting for power-on reset to complete. Signed-off-by: Shawn Nematbakhsh Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/trackpoint.c | 249 +++++++++++++++++++++++++-------------- drivers/input/mouse/trackpoint.h | 4 +- 2 files changed, 166 insertions(+), 87 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/mouse/trackpoint.c b/drivers/input/mouse/trackpoint.c index f3102494237d..ca843b6cf6bd 100644 --- a/drivers/input/mouse/trackpoint.c +++ b/drivers/input/mouse/trackpoint.c @@ -19,10 +19,35 @@ #include "psmouse.h" #include "trackpoint.h" +/* + * Power-on Reset: Resets all trackpoint parameters, including RAM values, + * to defaults. + * Returns zero on success, non-zero on failure. + */ +static int trackpoint_power_on_reset(struct ps2dev *ps2dev) +{ + unsigned char results[2]; + int tries = 0; + + /* Issue POR command, and repeat up to once if 0xFC00 received */ + do { + if (ps2_command(ps2dev, NULL, MAKE_PS2_CMD(0, 0, TP_COMMAND)) || + ps2_command(ps2dev, results, MAKE_PS2_CMD(0, 2, TP_POR))) + return -1; + } while (results[0] == 0xFC && results[1] == 0x00 && ++tries < 2); + + /* Check for success response -- 0xAA00 */ + if (results[0] != 0xAA || results[1] != 0x00) + return -1; + + return 0; +} + /* * Device IO: read, write and toggle bit */ -static int trackpoint_read(struct ps2dev *ps2dev, unsigned char loc, unsigned char *results) +static int trackpoint_read(struct ps2dev *ps2dev, + unsigned char loc, unsigned char *results) { if (ps2_command(ps2dev, NULL, MAKE_PS2_CMD(0, 0, TP_COMMAND)) || ps2_command(ps2dev, results, MAKE_PS2_CMD(0, 1, loc))) { @@ -32,7 +57,8 @@ static int trackpoint_read(struct ps2dev *ps2dev, unsigned char loc, unsigned ch return 0; } -static int trackpoint_write(struct ps2dev *ps2dev, unsigned char loc, unsigned char val) +static int trackpoint_write(struct ps2dev *ps2dev, + unsigned char loc, unsigned char val) { if (ps2_command(ps2dev, NULL, MAKE_PS2_CMD(0, 0, TP_COMMAND)) || ps2_command(ps2dev, NULL, MAKE_PS2_CMD(0, 0, TP_WRITE_MEM)) || @@ -44,7 +70,8 @@ static int trackpoint_write(struct ps2dev *ps2dev, unsigned char loc, unsigned c return 0; } -static int trackpoint_toggle_bit(struct ps2dev *ps2dev, unsigned char loc, unsigned char mask) +static int trackpoint_toggle_bit(struct ps2dev *ps2dev, + unsigned char loc, unsigned char mask) { /* Bad things will happen if the loc param isn't in this range */ if (loc < 0x20 || loc >= 0x2F) @@ -60,6 +87,18 @@ static int trackpoint_toggle_bit(struct ps2dev *ps2dev, unsigned char loc, unsig return 0; } +static int trackpoint_update_bit(struct ps2dev *ps2dev, unsigned char loc, + unsigned char mask, unsigned char value) +{ + int retval = 0; + unsigned char data; + + trackpoint_read(ps2dev, loc, &data); + if (((data & mask) == mask) != !!value) + retval = trackpoint_toggle_bit(ps2dev, loc, mask); + + return retval; +} /* * Trackpoint-specific attributes @@ -69,6 +108,7 @@ struct trackpoint_attr_data { unsigned char command; unsigned char mask; unsigned char inverted; + unsigned char power_on_default; }; static ssize_t trackpoint_show_int_attr(struct psmouse *psmouse, void *data, char *buf) @@ -102,10 +142,11 @@ static ssize_t trackpoint_set_int_attr(struct psmouse *psmouse, void *data, return count; } -#define TRACKPOINT_INT_ATTR(_name, _command) \ +#define TRACKPOINT_INT_ATTR(_name, _command, _default) \ static struct trackpoint_attr_data trackpoint_attr_##_name = { \ .field_offset = offsetof(struct trackpoint_data, _name), \ .command = _command, \ + .power_on_default = _default, \ }; \ PSMOUSE_DEFINE_ATTR(_name, S_IWUSR | S_IRUGO, \ &trackpoint_attr_##_name, \ @@ -139,31 +180,60 @@ static ssize_t trackpoint_set_bit_attr(struct psmouse *psmouse, void *data, } -#define TRACKPOINT_BIT_ATTR(_name, _command, _mask, _inv) \ - static struct trackpoint_attr_data trackpoint_attr_##_name = { \ - .field_offset = offsetof(struct trackpoint_data, _name), \ - .command = _command, \ - .mask = _mask, \ - .inverted = _inv, \ - }; \ - PSMOUSE_DEFINE_ATTR(_name, S_IWUSR | S_IRUGO, \ - &trackpoint_attr_##_name, \ - trackpoint_show_int_attr, trackpoint_set_bit_attr) - -TRACKPOINT_INT_ATTR(sensitivity, TP_SENS); -TRACKPOINT_INT_ATTR(speed, TP_SPEED); -TRACKPOINT_INT_ATTR(inertia, TP_INERTIA); -TRACKPOINT_INT_ATTR(reach, TP_REACH); -TRACKPOINT_INT_ATTR(draghys, TP_DRAGHYS); -TRACKPOINT_INT_ATTR(mindrag, TP_MINDRAG); -TRACKPOINT_INT_ATTR(thresh, TP_THRESH); -TRACKPOINT_INT_ATTR(upthresh, TP_UP_THRESH); -TRACKPOINT_INT_ATTR(ztime, TP_Z_TIME); -TRACKPOINT_INT_ATTR(jenks, TP_JENKS_CURV); - -TRACKPOINT_BIT_ATTR(press_to_select, TP_TOGGLE_PTSON, TP_MASK_PTSON, 0); -TRACKPOINT_BIT_ATTR(skipback, TP_TOGGLE_SKIPBACK, TP_MASK_SKIPBACK, 0); -TRACKPOINT_BIT_ATTR(ext_dev, TP_TOGGLE_EXT_DEV, TP_MASK_EXT_DEV, 1); +#define TRACKPOINT_BIT_ATTR(_name, _command, _mask, _inv, _default) \ +static struct trackpoint_attr_data trackpoint_attr_##_name = { \ + .field_offset = offsetof(struct trackpoint_data, \ + _name), \ + .command = _command, \ + .mask = _mask, \ + .inverted = _inv, \ + .power_on_default = _default, \ + }; \ +PSMOUSE_DEFINE_ATTR(_name, S_IWUSR | S_IRUGO, \ + &trackpoint_attr_##_name, \ + trackpoint_show_int_attr, trackpoint_set_bit_attr) + +#define TRACKPOINT_UPDATE_BIT(_psmouse, _tp, _name) \ +do { \ + struct trackpoint_attr_data *_attr = &trackpoint_attr_##_name; \ + \ + trackpoint_update_bit(&_psmouse->ps2dev, \ + _attr->command, _attr->mask, _tp->_name); \ +} while (0) + +#define TRACKPOINT_UPDATE(_power_on, _psmouse, _tp, _name) \ +do { \ + if (!_power_on || \ + _tp->_name != trackpoint_attr_##_name.power_on_default) { \ + if (!trackpoint_attr_##_name.mask) \ + trackpoint_write(&_psmouse->ps2dev, \ + trackpoint_attr_##_name.command, \ + _tp->_name); \ + else \ + TRACKPOINT_UPDATE_BIT(_psmouse, _tp, _name); \ + } \ +} while (0) + +#define TRACKPOINT_SET_POWER_ON_DEFAULT(_tp, _name) \ + (_tp->_name = trackpoint_attr_##_name.power_on_default) + +TRACKPOINT_INT_ATTR(sensitivity, TP_SENS, TP_DEF_SENS); +TRACKPOINT_INT_ATTR(speed, TP_SPEED, TP_DEF_SPEED); +TRACKPOINT_INT_ATTR(inertia, TP_INERTIA, TP_DEF_INERTIA); +TRACKPOINT_INT_ATTR(reach, TP_REACH, TP_DEF_REACH); +TRACKPOINT_INT_ATTR(draghys, TP_DRAGHYS, TP_DEF_DRAGHYS); +TRACKPOINT_INT_ATTR(mindrag, TP_MINDRAG, TP_DEF_MINDRAG); +TRACKPOINT_INT_ATTR(thresh, TP_THRESH, TP_DEF_THRESH); +TRACKPOINT_INT_ATTR(upthresh, TP_UP_THRESH, TP_DEF_UP_THRESH); +TRACKPOINT_INT_ATTR(ztime, TP_Z_TIME, TP_DEF_Z_TIME); +TRACKPOINT_INT_ATTR(jenks, TP_JENKS_CURV, TP_DEF_JENKS_CURV); + +TRACKPOINT_BIT_ATTR(press_to_select, TP_TOGGLE_PTSON, TP_MASK_PTSON, 0, + TP_DEF_PTSON); +TRACKPOINT_BIT_ATTR(skipback, TP_TOGGLE_SKIPBACK, TP_MASK_SKIPBACK, 0, + TP_DEF_SKIPBACK); +TRACKPOINT_BIT_ATTR(ext_dev, TP_TOGGLE_EXT_DEV, TP_MASK_EXT_DEV, 1, + TP_DEF_EXT_DEV); static struct attribute *trackpoint_attrs[] = { &psmouse_attr_sensitivity.dattr.attr, @@ -202,73 +272,72 @@ static int trackpoint_start_protocol(struct psmouse *psmouse, unsigned char *fir return 0; } -static int trackpoint_sync(struct psmouse *psmouse) +/* + * Write parameters to trackpad. + * in_power_on_state: Set to true if TP is in default / power-on state (ex. if + * power-on reset was run). If so, values will only be + * written to TP if they differ from power-on default. + */ +static int trackpoint_sync(struct psmouse *psmouse, bool in_power_on_state) { struct trackpoint_data *tp = psmouse->private; - unsigned char toggle; - - /* Disable features that may make device unusable with this driver */ - trackpoint_read(&psmouse->ps2dev, TP_TOGGLE_TWOHAND, &toggle); - if (toggle & TP_MASK_TWOHAND) - trackpoint_toggle_bit(&psmouse->ps2dev, TP_TOGGLE_TWOHAND, TP_MASK_TWOHAND); - - trackpoint_read(&psmouse->ps2dev, TP_TOGGLE_SOURCE_TAG, &toggle); - if (toggle & TP_MASK_SOURCE_TAG) - trackpoint_toggle_bit(&psmouse->ps2dev, TP_TOGGLE_SOURCE_TAG, TP_MASK_SOURCE_TAG); - - trackpoint_read(&psmouse->ps2dev, TP_TOGGLE_MB, &toggle); - if (toggle & TP_MASK_MB) - trackpoint_toggle_bit(&psmouse->ps2dev, TP_TOGGLE_MB, TP_MASK_MB); - - /* Push the config to the device */ - trackpoint_write(&psmouse->ps2dev, TP_SENS, tp->sensitivity); - trackpoint_write(&psmouse->ps2dev, TP_INERTIA, tp->inertia); - trackpoint_write(&psmouse->ps2dev, TP_SPEED, tp->speed); - - trackpoint_write(&psmouse->ps2dev, TP_REACH, tp->reach); - trackpoint_write(&psmouse->ps2dev, TP_DRAGHYS, tp->draghys); - trackpoint_write(&psmouse->ps2dev, TP_MINDRAG, tp->mindrag); - - trackpoint_write(&psmouse->ps2dev, TP_THRESH, tp->thresh); - trackpoint_write(&psmouse->ps2dev, TP_UP_THRESH, tp->upthresh); - trackpoint_write(&psmouse->ps2dev, TP_Z_TIME, tp->ztime); - trackpoint_write(&psmouse->ps2dev, TP_JENKS_CURV, tp->jenks); + if (!in_power_on_state) { + /* + * Disable features that may make device unusable + * with this driver. + */ + trackpoint_update_bit(&psmouse->ps2dev, TP_TOGGLE_TWOHAND, + TP_MASK_TWOHAND, TP_DEF_TWOHAND); - trackpoint_read(&psmouse->ps2dev, TP_TOGGLE_PTSON, &toggle); - if (((toggle & TP_MASK_PTSON) == TP_MASK_PTSON) != tp->press_to_select) - trackpoint_toggle_bit(&psmouse->ps2dev, TP_TOGGLE_PTSON, TP_MASK_PTSON); + trackpoint_update_bit(&psmouse->ps2dev, TP_TOGGLE_SOURCE_TAG, + TP_MASK_SOURCE_TAG, TP_DEF_SOURCE_TAG); - trackpoint_read(&psmouse->ps2dev, TP_TOGGLE_SKIPBACK, &toggle); - if (((toggle & TP_MASK_SKIPBACK) == TP_MASK_SKIPBACK) != tp->skipback) - trackpoint_toggle_bit(&psmouse->ps2dev, TP_TOGGLE_SKIPBACK, TP_MASK_SKIPBACK); + trackpoint_update_bit(&psmouse->ps2dev, TP_TOGGLE_MB, + TP_MASK_MB, TP_DEF_MB); + } - trackpoint_read(&psmouse->ps2dev, TP_TOGGLE_EXT_DEV, &toggle); - if (((toggle & TP_MASK_EXT_DEV) == TP_MASK_EXT_DEV) != tp->ext_dev) - trackpoint_toggle_bit(&psmouse->ps2dev, TP_TOGGLE_EXT_DEV, TP_MASK_EXT_DEV); + /* + * These properties can be changed in this driver. Only + * configure them if the values are non-default or if the TP is in + * an unknown state. + */ + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, sensitivity); + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, inertia); + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, speed); + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, reach); + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, draghys); + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, mindrag); + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, thresh); + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, upthresh); + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, ztime); + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, jenks); + + /* toggles */ + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, press_to_select); + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, skipback); + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, ext_dev); return 0; } static void trackpoint_defaults(struct trackpoint_data *tp) { - tp->press_to_select = TP_DEF_PTSON; - tp->sensitivity = TP_DEF_SENS; - tp->speed = TP_DEF_SPEED; - tp->reach = TP_DEF_REACH; - - tp->draghys = TP_DEF_DRAGHYS; - tp->mindrag = TP_DEF_MINDRAG; - - tp->thresh = TP_DEF_THRESH; - tp->upthresh = TP_DEF_UP_THRESH; - - tp->ztime = TP_DEF_Z_TIME; - tp->jenks = TP_DEF_JENKS_CURV; - - tp->inertia = TP_DEF_INERTIA; - tp->skipback = TP_DEF_SKIPBACK; - tp->ext_dev = TP_DEF_EXT_DEV; + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, sensitivity); + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, speed); + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, reach); + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, draghys); + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, mindrag); + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, thresh); + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, upthresh); + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, ztime); + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, jenks); + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, inertia); + + /* toggles */ + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, press_to_select); + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, skipback); + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, ext_dev); } static void trackpoint_disconnect(struct psmouse *psmouse) @@ -281,10 +350,13 @@ static void trackpoint_disconnect(struct psmouse *psmouse) static int trackpoint_reconnect(struct psmouse *psmouse) { + int reset_fail; + if (trackpoint_start_protocol(psmouse, NULL)) return -1; - if (trackpoint_sync(psmouse)) + reset_fail = trackpoint_power_on_reset(&psmouse->ps2dev); + if (trackpoint_sync(psmouse, !reset_fail)) return -1; return 0; @@ -322,7 +394,12 @@ int trackpoint_detect(struct psmouse *psmouse, bool set_properties) __set_bit(BTN_MIDDLE, psmouse->dev->keybit); trackpoint_defaults(psmouse->private); - trackpoint_sync(psmouse); + + error = trackpoint_power_on_reset(&psmouse->ps2dev); + + /* Write defaults to TP only if reset fails. */ + if (error) + trackpoint_sync(psmouse, false); error = sysfs_create_group(&ps2dev->serio->dev.kobj, &trackpoint_attr_group); if (error) { diff --git a/drivers/input/mouse/trackpoint.h b/drivers/input/mouse/trackpoint.h index e558a7096618..ecd0547964a5 100644 --- a/drivers/input/mouse/trackpoint.h +++ b/drivers/input/mouse/trackpoint.h @@ -126,6 +126,8 @@ #define TP_DEF_PTSON 0x00 #define TP_DEF_SKIPBACK 0x00 #define TP_DEF_EXT_DEV 0x00 /* 0 means enabled */ +#define TP_DEF_TWOHAND 0x00 +#define TP_DEF_SOURCE_TAG 0x00 #define MAKE_PS2_CMD(params, results, cmd) ((params<<12) | (results<<8) | (cmd)) @@ -136,9 +138,9 @@ struct trackpoint_data unsigned char thresh, upthresh; unsigned char ztime, jenks; + /* toggles */ unsigned char press_to_select; unsigned char skipback; - unsigned char ext_dev; }; -- cgit v1.2.3