From baafb435372dd48e3854028aec669effae957c9e Mon Sep 17 00:00:00 2001 From: Rakesh Iyer Date: Wed, 11 May 2011 14:24:10 -0700 Subject: Input: tegra-kbc - change wakeup logic to be all or nothing Tegra hardware design cannot reliably support an arbitrary set of keys waking up the system. Modify wakeup logic so either any key wakes the system up or none will do. Signed-off-by: Rakesh Iyer Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/tegra-kbc.c | 24 ++---------------------- 1 file changed, 2 insertions(+), 22 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c index 5fb4b972f205..2b3b73ec6689 100644 --- a/drivers/input/keyboard/tegra-kbc.c +++ b/drivers/input/keyboard/tegra-kbc.c @@ -66,8 +66,6 @@ struct tegra_kbc { void __iomem *mmio; struct input_dev *idev; unsigned int irq; - unsigned int wake_enable_rows; - unsigned int wake_enable_cols; spinlock_t lock; unsigned int repoll_dly; unsigned long cp_dly_jiffies; @@ -418,21 +416,11 @@ static void tegra_kbc_setup_wakekeys(struct tegra_kbc *kbc, bool filter) int i; unsigned int rst_val; - BUG_ON(pdata->wake_cnt > KBC_MAX_KEY); - rst_val = (filter && pdata->wake_cnt) ? ~0 : 0; + /* Either mask all keys or none. */ + rst_val = (filter && !pdata->wakeup) ? ~0 : 0; for (i = 0; i < KBC_MAX_ROW; i++) writel(rst_val, kbc->mmio + KBC_ROW0_MASK_0 + i * 4); - - if (filter) { - for (i = 0; i < pdata->wake_cnt; i++) { - u32 val, addr; - addr = pdata->wake_cfg[i].row * 4 + KBC_ROW0_MASK_0; - val = readl(kbc->mmio + addr); - val &= ~(1 << pdata->wake_cfg[i].col); - writel(val, kbc->mmio + addr); - } - } } static void tegra_kbc_config_pins(struct tegra_kbc *kbc) @@ -594,7 +582,6 @@ static int __devinit tegra_kbc_probe(struct platform_device *pdev) struct resource *res; int irq; int err; - int i; int num_rows = 0; unsigned int debounce_cnt; unsigned int scan_time_rows; @@ -651,13 +638,6 @@ static int __devinit tegra_kbc_probe(struct platform_device *pdev) goto err_iounmap; } - kbc->wake_enable_rows = 0; - kbc->wake_enable_cols = 0; - for (i = 0; i < pdata->wake_cnt; i++) { - kbc->wake_enable_rows |= (1 << pdata->wake_cfg[i].row); - kbc->wake_enable_cols |= (1 << pdata->wake_cfg[i].col); - } - /* * The time delay between two consecutive reads of the FIFO is * the sum of the repeat time and the time taken for scanning -- cgit v1.2.3