From 0b884fe71f9ee6a5df35e677154256ea2099ebb8 Mon Sep 17 00:00:00 2001 From: Chunyan Zhang Date: Mon, 14 Dec 2020 12:58:50 +0800 Subject: i2c: sprd: use a specific timeout to avoid system hang up issue If the i2c device SCL bus being pulled up due to some exception before message transfer done, the system cannot receive the completing interrupt signal any more, it would not exit waiting loop until MAX_SCHEDULE_TIMEOUT jiffies eclipse, that would make the system seemed hang up. To avoid that happen, this patch adds a specific timeout for message transfer. Fixes: 8b9ec0719834 ("i2c: Add Spreadtrum I2C controller driver") Signed-off-by: Linhua Xu Signed-off-by: Chunyan Zhang [wsa: changed errno to ETIMEDOUT] Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-sprd.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c index 19cda6742423..2917fecf6c80 100644 --- a/drivers/i2c/busses/i2c-sprd.c +++ b/drivers/i2c/busses/i2c-sprd.c @@ -72,6 +72,8 @@ /* timeout (ms) for pm runtime autosuspend */ #define SPRD_I2C_PM_TIMEOUT 1000 +/* timeout (ms) for transfer message */ +#define I2C_XFER_TIMEOUT 1000 /* SPRD i2c data structure */ struct sprd_i2c { @@ -244,6 +246,7 @@ static int sprd_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg *msg, bool is_last_msg) { struct sprd_i2c *i2c_dev = i2c_adap->algo_data; + unsigned long time_left; i2c_dev->msg = msg; i2c_dev->buf = msg->buf; @@ -273,7 +276,10 @@ static int sprd_i2c_handle_msg(struct i2c_adapter *i2c_adap, sprd_i2c_opt_start(i2c_dev); - wait_for_completion(&i2c_dev->complete); + time_left = wait_for_completion_timeout(&i2c_dev->complete, + msecs_to_jiffies(I2C_XFER_TIMEOUT)); + if (!time_left) + return -ETIMEDOUT; return i2c_dev->err; } -- cgit v1.2.3 From 0b3ea2a06de1f52ea30865e227e109a5fd3b6214 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 21 Dec 2020 14:42:25 +0100 Subject: i2c: i801: Fix the i2c-mux gpiod_lookup_table not being properly terminated gpiod_add_lookup_table() expects the gpiod_lookup_table->table passed to it to be terminated with a zero-ed out entry. So we need to allocate one more entry then we will use. Fixes: d308dfbf62ef ("i2c: mux/i801: Switch to use descriptor passing") Signed-off-by: Hans de Goede Reviewed-by: Mika Westerberg Acked-by: Jean Delvare Reviewed-by: Linus Walleij Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-i801.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index ae90713443fa..877fe3733a42 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -1449,7 +1449,7 @@ static int i801_add_mux(struct i801_priv *priv) /* Register GPIO descriptor lookup table */ lookup = devm_kzalloc(dev, - struct_size(lookup, table, mux_config->n_gpios), + struct_size(lookup, table, mux_config->n_gpios + 1), GFP_KERNEL); if (!lookup) return -ENOMEM; -- cgit v1.2.3 From 05f6f7271a38c482c5021967433f7b698e102c45 Mon Sep 17 00:00:00 2001 From: Qii Wang Date: Thu, 24 Dec 2020 20:26:07 +0800 Subject: i2c: mediatek: Fix apdma and i2c hand-shake timeout With the apdma remove hand-shake signal, it requirs special operation timing to reset i2c manually, otherwise the interrupt will not be triggered, i2c transmission will be timeout. Fixes: 8426fe70cfa4("i2c: mediatek: Add apdma sync in i2c driver") Signed-off-by: Qii Wang Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mt65xx.c | 27 ++++++++++++++++++++++----- 1 file changed, 22 insertions(+), 5 deletions(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c index 33de99b7bc20..0818d3e50734 100644 --- a/drivers/i2c/busses/i2c-mt65xx.c +++ b/drivers/i2c/busses/i2c-mt65xx.c @@ -38,6 +38,7 @@ #define I2C_IO_CONFIG_OPEN_DRAIN 0x0003 #define I2C_IO_CONFIG_PUSH_PULL 0x0000 #define I2C_SOFT_RST 0x0001 +#define I2C_HANDSHAKE_RST 0x0020 #define I2C_FIFO_ADDR_CLR 0x0001 #define I2C_DELAY_LEN 0x0002 #define I2C_TIME_CLR_VALUE 0x0000 @@ -45,6 +46,7 @@ #define I2C_WRRD_TRANAC_VALUE 0x0002 #define I2C_RD_TRANAC_VALUE 0x0001 #define I2C_SCL_MIS_COMP_VALUE 0x0000 +#define I2C_CHN_CLR_FLAG 0x0000 #define I2C_DMA_CON_TX 0x0000 #define I2C_DMA_CON_RX 0x0001 @@ -54,7 +56,9 @@ #define I2C_DMA_START_EN 0x0001 #define I2C_DMA_INT_FLAG_NONE 0x0000 #define I2C_DMA_CLR_FLAG 0x0000 +#define I2C_DMA_WARM_RST 0x0001 #define I2C_DMA_HARD_RST 0x0002 +#define I2C_DMA_HANDSHAKE_RST 0x0004 #define MAX_SAMPLE_CNT_DIV 8 #define MAX_STEP_CNT_DIV 64 @@ -475,11 +479,24 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c) { u16 control_reg; - writel(I2C_DMA_HARD_RST, i2c->pdmabase + OFFSET_RST); - udelay(50); - writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_RST); - - mtk_i2c_writew(i2c, I2C_SOFT_RST, OFFSET_SOFTRESET); + if (i2c->dev_comp->dma_sync) { + writel(I2C_DMA_WARM_RST, i2c->pdmabase + OFFSET_RST); + udelay(10); + writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_RST); + udelay(10); + writel(I2C_DMA_HANDSHAKE_RST | I2C_DMA_HARD_RST, + i2c->pdmabase + OFFSET_RST); + mtk_i2c_writew(i2c, I2C_HANDSHAKE_RST | I2C_SOFT_RST, + OFFSET_SOFTRESET); + udelay(10); + writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_RST); + mtk_i2c_writew(i2c, I2C_CHN_CLR_FLAG, OFFSET_SOFTRESET); + } else { + writel(I2C_DMA_HARD_RST, i2c->pdmabase + OFFSET_RST); + udelay(50); + writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_RST); + mtk_i2c_writew(i2c, I2C_SOFT_RST, OFFSET_SOFTRESET); + } /* Set ioconfig */ if (i2c->use_push_pull) -- cgit v1.2.3 From 27b7c6e096264cc7b91bb80a4f65f8c0a66f079f Mon Sep 17 00:00:00 2001 From: Mikko Perttunen Date: Mon, 11 Jan 2021 18:08:32 +0200 Subject: i2c: tegra: Wait for config load atomically while in ISR Upon a communication error, the interrupt handler can call tegra_i2c_disable_packet_mode. This causes a sleeping poll to happen unless the current transaction was marked atomic. Fix this by making the poll happen atomically if we are in an IRQ. This matches the behavior prior to the patch mentioned in the Fixes tag. Fixes: ede2299f7101 ("i2c: tegra: Support atomic transfers") Cc: stable@vger.kernel.org Signed-off-by: Mikko Perttunen Reviewed-by: Dmitry Osipenko Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-tegra.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 6f08c0c3238d..0727383f4940 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -533,7 +533,7 @@ static int tegra_i2c_poll_register(struct tegra_i2c_dev *i2c_dev, void __iomem *addr = i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg); u32 val; - if (!i2c_dev->atomic_mode) + if (!i2c_dev->atomic_mode && !in_irq()) return readl_relaxed_poll_timeout(addr, val, !(val & mask), delay_us, timeout_us); -- cgit v1.2.3 From bc1c2048abbe3c3074b4de91d213595c57741a6b Mon Sep 17 00:00:00 2001 From: Mikko Perttunen Date: Tue, 12 Jan 2021 12:22:25 +0200 Subject: i2c: bpmp-tegra: Ignore unknown I2C_M flags In order to not to start returning errors when new I2C_M flags are added, change behavior to just ignore all flags that we don't know about. This includes the I2C_M_DMA_SAFE flag that already exists but causes -EINVAL to be returned for valid transactions. Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Mikko Perttunen Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-tegra-bpmp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-tegra-bpmp.c b/drivers/i2c/busses/i2c-tegra-bpmp.c index ec7a7e917edd..c0c7d01473f2 100644 --- a/drivers/i2c/busses/i2c-tegra-bpmp.c +++ b/drivers/i2c/busses/i2c-tegra-bpmp.c @@ -80,7 +80,7 @@ static int tegra_bpmp_xlate_flags(u16 flags, u16 *out) flags &= ~I2C_M_RECV_LEN; } - return (flags != 0) ? -EINVAL : 0; + return 0; } /** -- cgit v1.2.3 From 2f3a0828d46166d4e7df227479ed31766ee67e4a Mon Sep 17 00:00:00 2001 From: Sowjanya Komatineni Date: Tue, 12 Jan 2021 11:02:41 -0800 Subject: i2c: tegra: Create i2c_writesl_vi() to use with VI I2C for filling TX FIFO VI I2C controller has known hardware bug where immediate multiple writes to TX_FIFO register gets stuck. Recommended software work around is to read I2C register after each write to TX_FIFO register to flush out the data. This patch implements this work around for VI I2C controller. Signed-off-by: Sowjanya Komatineni Reviewed-by: Dmitry Osipenko Acked-by: Thierry Reding Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-tegra.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 0727383f4940..8b113ae32dc7 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -326,6 +326,8 @@ static void i2c_writel(struct tegra_i2c_dev *i2c_dev, u32 val, unsigned int reg) /* read back register to make sure that register writes completed */ if (reg != I2C_TX_FIFO) readl_relaxed(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg)); + else if (i2c_dev->is_vi) + readl_relaxed(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, I2C_INT_STATUS)); } static u32 i2c_readl(struct tegra_i2c_dev *i2c_dev, unsigned int reg) @@ -339,6 +341,21 @@ static void i2c_writesl(struct tegra_i2c_dev *i2c_dev, void *data, writesl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg), data, len); } +static void i2c_writesl_vi(struct tegra_i2c_dev *i2c_dev, void *data, + unsigned int reg, unsigned int len) +{ + u32 *data32 = data; + + /* + * VI I2C controller has known hardware bug where writes get stuck + * when immediate multiple writes happen to TX_FIFO register. + * Recommended software work around is to read I2C register after + * each write to TX_FIFO register to flush out the data. + */ + while (len--) + i2c_writel(i2c_dev, *data32++, reg); +} + static void i2c_readsl(struct tegra_i2c_dev *i2c_dev, void *data, unsigned int reg, unsigned int len) { @@ -811,7 +828,10 @@ static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev) i2c_dev->msg_buf_remaining = buf_remaining; i2c_dev->msg_buf = buf + words_to_transfer * BYTES_PER_FIFO_WORD; - i2c_writesl(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer); + if (i2c_dev->is_vi) + i2c_writesl_vi(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer); + else + i2c_writesl(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer); buf += words_to_transfer * BYTES_PER_FIFO_WORD; } -- cgit v1.2.3 From 1b2cfa2d1dbdcc3b6dba1ecb7026a537a1d7277f Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sat, 9 Jan 2021 13:43:08 +0100 Subject: i2c: octeon: check correct size of maximum RECV_LEN packet I2C_SMBUS_BLOCK_MAX defines already the maximum number as defined in the SMBus 2.0 specs. No reason to add one to it. Fixes: 886f6f8337dd ("i2c: octeon: Support I2C_M_RECV_LEN") Signed-off-by: Wolfram Sang Reviewed-by: Robert Richter Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-octeon-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-octeon-core.c b/drivers/i2c/busses/i2c-octeon-core.c index d9607905dc2f..845eda70b8ca 100644 --- a/drivers/i2c/busses/i2c-octeon-core.c +++ b/drivers/i2c/busses/i2c-octeon-core.c @@ -347,7 +347,7 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target, if (result) return result; if (recv_len && i == 0) { - if (data[i] > I2C_SMBUS_BLOCK_MAX + 1) + if (data[i] > I2C_SMBUS_BLOCK_MAX) return -EPROTO; length += data[i]; } -- cgit v1.2.3 From a4166340a6e4d501c9e3aee81c20a269726ecde0 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 19 Jan 2021 23:41:23 -0300 Subject: Revert "i2c: imx: Remove unused .id_table support" Coldfire platforms are non-DT users of this driver, so keep the .id_table support. This reverts commit c610199cd392e6e2d41811ef83d85355c1b862b3. Fixes: c610199cd392 (i2c: imx: Remove unused .id_table support") Reported-by: Sascha Hauer Signed-off-by: Fabio Estevam Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-imx.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index b444fbf1a262..a8e8af57e33f 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -241,6 +241,19 @@ static struct imx_i2c_hwdata vf610_i2c_hwdata = { }; +static const struct platform_device_id imx_i2c_devtype[] = { + { + .name = "imx1-i2c", + .driver_data = (kernel_ulong_t)&imx1_i2c_hwdata, + }, { + .name = "imx21-i2c", + .driver_data = (kernel_ulong_t)&imx21_i2c_hwdata, + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, imx_i2c_devtype); + static const struct of_device_id i2c_imx_dt_ids[] = { { .compatible = "fsl,imx1-i2c", .data = &imx1_i2c_hwdata, }, { .compatible = "fsl,imx21-i2c", .data = &imx21_i2c_hwdata, }, @@ -1330,7 +1343,11 @@ static int i2c_imx_probe(struct platform_device *pdev) return -ENOMEM; match = device_get_match_data(&pdev->dev); - i2c_imx->hwdata = match; + if (match) + i2c_imx->hwdata = match; + else + i2c_imx->hwdata = (struct imx_i2c_hwdata *) + platform_get_device_id(pdev)->driver_data; /* Setup i2c_imx driver structure */ strlcpy(i2c_imx->adapter.name, pdev->name, sizeof(i2c_imx->adapter.name)); @@ -1498,6 +1515,7 @@ static struct platform_driver i2c_imx_driver = { .of_match_table = i2c_imx_dt_ids, .acpi_match_table = i2c_imx_acpi_ids, }, + .id_table = imx_i2c_devtype, }; static int __init i2c_adap_imx_init(void) -- cgit v1.2.3 From 9ecd1d2b302b600351fac50779f43fcb680c1a16 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 17 Jan 2021 12:43:13 +0100 Subject: i2c: sprd: depend on COMMON_CLK to fix compile tests The I2C_SPRD uses Common Clock Framework thus it cannot be built on platforms without it (e.g. compile test on MIPS with LANTIQ): /usr/bin/mips-linux-gnu-ld: drivers/i2c/busses/i2c-sprd.o: in function `sprd_i2c_probe': i2c-sprd.c:(.text.sprd_i2c_probe+0x254): undefined reference to `clk_set_parent' Fixes: 4a2d5f663dab ("i2c: Enable compile testing for more drivers") Reported-by: kernel test robot Signed-off-by: Krzysztof Kozlowski Reviewed-by: Baolin Wang Signed-off-by: Wolfram Sang --- drivers/i2c/busses/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index d4d60ad0eda0..ab1f39ac39f4 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -1013,6 +1013,7 @@ config I2C_SIRF config I2C_SPRD tristate "Spreadtrum I2C interface" depends on I2C=y && (ARCH_SPRD || COMPILE_TEST) + depends on COMMON_CLK help If you say yes to this option, support will be included for the Spreadtrum I2C interface. -- cgit v1.2.3